ZTE-AN-QOS-MIB

File: ZTE-AN-QOS-MIB.mib (76921 bytes)

Imported modules

SNMPv2-TC SNMPv2-SMI SNMPv2-CONF
ZTE-AN-SMI IF-MIB ZTE-AN-TC-MIB
ZTE-AN-IF-MIB

Imported symbols

RowStatus DisplayString MODULE-IDENTITY
OBJECT-TYPE Integer32 Counter64
OBJECT-GROUP MODULE-COMPLIANCE zxAnQos
ifIndex VlanId zxAnSubIfIndex

Defined Types

ZxAnQosCosToCosPrfEntry  
SEQUENCE    
  zxAnQosCosToCosPrfName DisplayString
  zxAnQosCosToCos OCTET STRING
  zxAnQosCosToCosPrfRowStatus RowStatus

ZxAnQosDscpToDscpPrfEntry  
SEQUENCE    
  zxAnQosDscpToDscpPrfName DisplayString
  zxAnQosDscpToDscp OCTET STRING
  zxAnQosDscpToDscpPrfRowStatus RowStatus

ZxAnQosDscpToCosPrfEntry  
SEQUENCE    
  zxAnQosDscpToCosPrfName DisplayString
  zxAnQosDscpToCos OCTET STRING
  zxAnQosDscpToCosPrfRowStatus RowStatus

ZxAnQosMplsTcToCosPrfEntry  
SEQUENCE    
  zxAnQosMplsTcToCosPrfName DisplayString
  zxAnQosMplsTcToCos OCTET STRING
  zxAnQosMplsTcToCosPrfRowStatus RowStatus

ZxAnQosCosToMplsTcPrfEntry  
SEQUENCE    
  zxAnQosCosToMplsTcPrfName DisplayString
  zxAnQosCosToMplsTc OCTET STRING
  zxAnQosCosToMplsTcPrfRowStatus RowStatus

ZxAnQosCosToDeiPrfEntry  
SEQUENCE    
  zxAnQosCosToDeiPrfName DisplayString
  zxAnQosCosToDeiMappingType INTEGER
  zxAnQosCosToDei OCTET STRING
  zxAnQosCosToDeiRowStatus RowStatus

ZxAnQosQueueConfPrfEntry  
SEQUENCE    
  zxAnQosQueueConfPrfName DisplayString
  zxAnQosQueueConfDepthRatio OCTET STRING
  zxAnQosQueueConfBufferSize Integer32
  zxAnQosQueueConfPrfRowStatus RowStatus

ZxAnQosQueueWredConfEntry  
SEQUENCE    
  zxAnQosQWredConfQueueNo Integer32
  zxAnQosQWredConfYellowLThresh Integer32
  zxAnQosQWredConfYellowHThresh Integer32
  zxAnQosQWredConfYellowMaxProb Integer32
  zxAnQosQWredConfGreenLThresh Integer32
  zxAnQosQWredConfGreenHThresh Integer32
  zxAnQosQWredConfGreenMaxProb Integer32

ZxAnQosIfConfEntry  
SEQUENCE    
  zxAnQosIfTrustMode INTEGER
  zxAnQosIfDefaultCos Integer32
  zxAnQosIfCosToCosPrf DisplayString
  zxAnQosIfDscpToDscpPrf DisplayString
  zxAnQosIfDscpToCosPrf DisplayString
  zxAnQosIfCosOverride INTEGER
  zxAnQosIfEgressCosOverride INTEGER
  zxAnQosIfEgressCosToCosPrf DisplayString
  zxAnQosIfEgressDscpToCosPrf DisplayString
  zxAnQosIfQueueWredPrf DisplayString
  zxAnQosIfQueueConfPrf DisplayString

ZxAnQosIfQueueStatsEntry  
SEQUENCE    
  zxAnQosIfQueueStatsQueueId Integer32
  zxAnQosIfQueueStatsForwardPkts Counter64
  zxAnQosIfQueueStatsDiscardPkts Counter64
  zxAnQosIfQueueDiscardGreenPkts Counter64
  zxAnQosIfQueueDiscardYellowPkts Counter64
  zxAnQosIfQueueStatsReset INTEGER

ZxAnQosBrgIfQueueStatsEntry  
SEQUENCE    
  zxAnQosBrgIfQStatsQueueId Integer32
  zxAnQosBrgIfQStatsForwardPkts Counter64
  zxAnQosBrgIfQStatsDiscardPkts Counter64
  zxAnQosBrgIfQDiscardGreenPkts Counter64
  zxAnQosBrgIfQDiscardYellowPkts Counter64
  zxAnQosBrgIfQStatsReset INTEGER
  zxAnQosBrgIfQStatsRowStatus RowStatus

ZxAnQosIfQDiscardPktThreshEntry  
SEQUENCE    
  zxAnQosIfQDiscardPktThrQueueId Integer32
  zxAnQosIfQShortDiscardPktThresh Integer32
  zxAnQosIfQLongDiscardPktThresh Integer32
  zxAnQosIfQDiscardPktThrRowStatus RowStatus

ZxAnQosVlanCosToDeiPrfConfEntry  
SEQUENCE    
  zxAnQosVlanCosToDeiPrfConfVid VlanId
  zxAnQosVlanCosToDeiPrfConfName DisplayString
  zxAnQosVlanCosToDeiPrfRowStatus RowStatus

ZxAnQosVlanEgressDeiEntry  
SEQUENCE    
  zxAnQosVlanEgressDeiVid VlanId
  zxAnQosVlanEgressDeiRowStatus RowStatus

ZxAnQosVlanCosToCosPrfConfEntry  
SEQUENCE    
  zxAnQosVlanCosToCosPrfConfSVid VlanId
  zxAnQosVlanCosToCosPrfConfCVid Integer32
  zxAnQosVlanCosToCosPrfConfMode INTEGER
  zxAnQosVlanCosToCosPrfConfName DisplayString
  zxAnQosVlanCosToCosPrfRowStatus RowStatus

Defined Values

zxAnQosMib 1.3.6.1.4.1.3902.1082.50.1
This MIB defines ZTE Access Node QoS managed objects.
MODULE-IDENTITY    

zxAnQosGlobalObjects 1.3.6.1.4.1.3902.1082.50.1.1
OBJECT IDENTIFIER    

zxAnQosCapabilities 1.3.6.1.4.1.3902.1082.50.1.1.100
The QoS capabilities. The bit value 1 means the function represented by this bit is supported by this equipment. bit 0: value 1 means supporting zxAnQosPvcToQueue in zxAnQosQueueMapPrfTable. bit 1: value 1 means supporting PON channel interface in zxAnQosIfQueueStatsTable. bit 2: value 1 means supporting zxAnQosQueueConfBufferSize in zxAnQosQueueConfPrfTable. NOTE: No recommended to display it in NMS.
Status: current Access: read-only
OBJECT-TYPE    
  BITS supportPvcToQueue(0), supportPonChIfInQueueStatsTable(1), supportQueueConfBufferSize(2)  

zxAnQosObjects 1.3.6.1.4.1.3902.1082.50.1.2
OBJECT IDENTIFIER    

zxAnQosMapObjects 1.3.6.1.4.1.3902.1082.50.1.2.1
OBJECT IDENTIFIER    

zxAnQosMapGlobalObjects 1.3.6.1.4.1.3902.1082.50.1.2.1.1
OBJECT IDENTIFIER    

zxAnQosGlobalCosToDropPrecedence 1.3.6.1.4.1.3902.1082.50.1.2.1.1.1
The global CoS mapping drop precedence value. For example, '00 01 02 00 01 02 01 02' means CoS 0 is mapping to drop precedence 0, CoS 1 is mapping to drop precedence 1, ..., CoS 7 is mapping to drop precedence 2. The range of drop precedence is 0-2. The value 'ff ff ff ff ff ff ff ff' means the drop precedence is not configured.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(8)  

zxAnQosCosToCosPrfTable 1.3.6.1.4.1.3902.1082.50.1.2.1.2
This table contains CosToCos mapping information. One entry in this table reflects a profile defined which can be used to configure an interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnQosCosToCosPrfEntry

zxAnQosCosToCosPrfEntry 1.3.6.1.4.1.3902.1082.50.1.2.1.2.1
zxAnQosCosToCosPrfTable entry. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create an entry, the mandatory and optional variables are as follows: mandatory: zxAnQosCosToCos, zxAnQosCosToCosPrfRowStatus. optional : none. To delete an entry, only zxAnQosCosToCosPrfRowStatus is needed in one SNMP setOperation. After an entry is created, only variable zxAnQosCosToCos can be modified. If a manager tries to modify any other variables in this entry, agent will return error with SNMP error code inconsistentValue.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnQosCosToCosPrfEntry  

zxAnQosCosToCosPrfName 1.3.6.1.4.1.3902.1082.50.1.2.1.2.1.1
The profile name is a display string. It is an index of this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..32)  

zxAnQosCosToCos 1.3.6.1.4.1.3902.1082.50.1.2.1.2.1.2
The values for CoS remarking. For example, the value '00 01 02 03 04 05 06 07' means CoS 0 is remarked to CoS 0,..., CoS 7 is remarked to CoS 7. The range of CoS is 0-7.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(8)  

zxAnQosCosToCosPrfRowStatus 1.3.6.1.4.1.3902.1082.50.1.2.1.2.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosCosToCosPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnQosDscpToDscpPrfTable 1.3.6.1.4.1.3902.1082.50.1.2.1.3
This table contains DSCP remark information. One entry in this table reflects a profile defined which can be used to configure an interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnQosDscpToDscpPrfEntry

zxAnQosDscpToDscpPrfEntry 1.3.6.1.4.1.3902.1082.50.1.2.1.3.1
zxAnQosDscpToDscpPrfTable entry. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create an entry, the mandatory and optional variables are as follows: mandatory: zxAnQosDscpToDscp, zxAnQosDscpToDscpPrfRowStatus. optional: none. To delete an entry, only zxAnQosDscpToDscpPrfRowStatus is needed in one SNMP set operation. After an entry is created, only variable zxAnQosDscpToDscp can be modified. If a manager tries to modify any other variables in this entry, agent will return error with SNMP error code inconsistentValue.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnQosDscpToDscpPrfEntry  

zxAnQosDscpToDscpPrfName 1.3.6.1.4.1.3902.1082.50.1.2.1.3.1.1
The profile name is a display string. It is an index of this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..32)  

zxAnQosDscpToDscp 1.3.6.1.4.1.3902.1082.50.1.2.1.3.1.2
The values for DSCP priority remarking. For example, the value '00 01 ...3F' means DSCP priority 0 is remarked to DSCP priority 0,...,DSCP priority 63 is remarked to DSCP priority 63. The range of DSCP priority is 0-63.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(64)  

zxAnQosDscpToDscpPrfRowStatus 1.3.6.1.4.1.3902.1082.50.1.2.1.3.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosDscpToDscpPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnQosDscpToCosPrfTable 1.3.6.1.4.1.3902.1082.50.1.2.1.4
This table contains DSCP to CoS mapping information. One entry in this table reflects a profile defined which can be used to configure an interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnQosDscpToCosPrfEntry

zxAnQosDscpToCosPrfEntry 1.3.6.1.4.1.3902.1082.50.1.2.1.4.1
zxAnQosDscpToCosPrfTable entry. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create an entry, the mandatory and optional variables are as follows: mandatory: zxAnQosDscpToCos, zxAnQosDscpToCosPrfRowStatus. optional: none. To delete an entry, only zxAnQosDscpToCosPrfRowStatus is needed in one SNMP set operation. After an entry is created, only variable zxAnQosDscpToCos can be modified. If a manager tries to modify any other variables in this entry, agent will return error with SNMP error code inconsistentValue.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnQosDscpToCosPrfEntry  

zxAnQosDscpToCosPrfName 1.3.6.1.4.1.3902.1082.50.1.2.1.4.1.1
The profile name is a display string. It is an index of this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..32)  

zxAnQosDscpToCos 1.3.6.1.4.1.3902.1082.50.1.2.1.4.1.2
The DSCP mapping CoS. For example, the value '00 01...07' means DSCP priority 0 is mapping to CoS 0,...,DSCP priority 63 is mapping to CoS 7. The range of CoS is 0-7.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(64)  

zxAnQosDscpToCosPrfRowStatus 1.3.6.1.4.1.3902.1082.50.1.2.1.4.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosDscpToCosPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnQosMplsTcToCosPrfTable 1.3.6.1.4.1.3902.1082.50.1.2.1.6
This table contains MPLS TC value to CoS mapping information. One entry in this table reflects a profile defined which can be used to configure an interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnQosMplsTcToCosPrfEntry

zxAnQosMplsTcToCosPrfEntry 1.3.6.1.4.1.3902.1082.50.1.2.1.6.1
zxAnQosMplsTcToCosPrfTable entry. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create an entry, the mandatory and optional variables are as follows: mandatory: zxAnQosMplsTcToCos, zxAnQosMplsTcToCosPrfRowStatus. optional: none. To delete an entry, only zxAnQosMplsTcToCosPrfRowStatus is needed in one SNMP set operation. After an entry is created, only variable zxAnQosMplsTcToCos can be modified. If a manager tries to modify any other variables in this entry, agent will return error with SNMP error code inconsistentValue.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnQosMplsTcToCosPrfEntry  

zxAnQosMplsTcToCosPrfName 1.3.6.1.4.1.3902.1082.50.1.2.1.6.1.1
The profile name is a display string. It is an index of this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..32)  

zxAnQosMplsTcToCos 1.3.6.1.4.1.3902.1082.50.1.2.1.6.1.2
The MPLS TC mapping to CoS. For example, '00 01 02 03 04 05 06 07' means TC 0 is mapping to CoS 0, ..., TC 7 is mapping to CoS 7. The range of MPLS TC value and CoS are 0-7.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(8)  

zxAnQosMplsTcToCosPrfRowStatus 1.3.6.1.4.1.3902.1082.50.1.2.1.6.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosMplsTcToCosPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnQosCosToMplsTcPrfTable 1.3.6.1.4.1.3902.1082.50.1.2.1.7
This table contains CoS to MPLS TC mapping information. One entry in this table reflects a profile defined which can be used to configure an interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnQosCosToMplsTcPrfEntry

zxAnQosCosToMplsTcPrfEntry 1.3.6.1.4.1.3902.1082.50.1.2.1.7.1
zxAnQosCosToMplsTcPrfTable entry. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create an entry, the mandatory and optional variables are as follows: mandatory: zxAnQosCosToMplsTc, zxAnQosCosToMplsTcPrfRowStatus. optional: none. To delete an entry, only zxAnQosCosToMplsTcPrfRowStatus is needed in one SNMP set operation. After an entry is created, only variable zxAnQosCosToMplsTc can be modified. If a manager tries to modify any other variables in this entry, agent will return error with SNMP error code inconsistentValue.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnQosCosToMplsTcPrfEntry  

zxAnQosCosToMplsTcPrfName 1.3.6.1.4.1.3902.1082.50.1.2.1.7.1.1
The profile name is a display string. It is an index of this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..32)  

zxAnQosCosToMplsTc 1.3.6.1.4.1.3902.1082.50.1.2.1.7.1.2
The CoS mapping MPLS TC value. For example, '00 01 02 03 04 05 06 07' means CoS 0 is mapping to TC value 0,..., CoS 7 is mapping to TC value 7. The range of CoS and TC value are 0-7.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(8)  

zxAnQosCosToMplsTcPrfRowStatus 1.3.6.1.4.1.3902.1082.50.1.2.1.7.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosCosToMplsTcPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnQosCosToDeiPrfTable 1.3.6.1.4.1.3902.1082.50.1.2.1.9
This table contains CoS to DEI (Drop Eligible Indicator) mapping information. One entry in this table reflects a profile defined which can be used to configure an interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnQosCosToDeiPrfEntry

zxAnQosCosToDeiPrfEntry 1.3.6.1.4.1.3902.1082.50.1.2.1.9.1
zxAnQosCosToDeiPrfTable entry. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create an entry, the mandatory and optional variables are as follows: mandatory: zxAnQosCosToDeiMappingType, zxAnQosCosToDei, zxAnQosCosToDeiRowStatus. optional: none. To delete an entry, only zxAnQosCosToDeiRowStatus is needed in one SNMP set operation. After an entry is created, variable zxAnQosCosToDeiMappingType, zxAnQosCosToDei can be modified. If a manager tries to modify any other variables in this entry, agent will return error with SNMP error code inconsistentValue.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnQosCosToDeiPrfEntry  

zxAnQosCosToDeiPrfName 1.3.6.1.4.1.3902.1082.50.1.2.1.9.1.1
The profile name is a display string. It is an index of this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..32)  

zxAnQosCosToDeiMappingType 1.3.6.1.4.1.3902.1082.50.1.2.1.9.1.2
ccosToSdei(1) -- mapping C-Tag CoS to S-DEI. ccosToCdei(2) -- mapping C-Tag CoS to C-DEI. scosToSdei(3) -- mapping S-Tag CoS to S-DEI.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ccosToSdei(1), ccosToCdei(2), scosToSdei(3)  

zxAnQosCosToDei 1.3.6.1.4.1.3902.1082.50.1.2.1.9.1.3
The CoS mapping to DEI value. For example, '00 01 02 00 01 02 01 02' means CoS 0 is mapping to DEI 0, CoS 1 is mapping to DEI 1, ..., CoS 7 is mapping to DEI 2. The range of DEI is 0-2. '0' -- green packet. '1' -- yellow packet. '2' -- discarded.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(8)  

zxAnQosCosToDeiRowStatus 1.3.6.1.4.1.3902.1082.50.1.2.1.9.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosCosToDeiPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnQosQueueObjects 1.3.6.1.4.1.3902.1082.50.1.2.2
OBJECT IDENTIFIER    

zxAnQosQueueGlobalObjects 1.3.6.1.4.1.3902.1082.50.1.2.2.1
OBJECT IDENTIFIER    

zxAnQosGlobalMaxQueues 1.3.6.1.4.1.3902.1082.50.1.2.2.1.3
The global maximum queues.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER four(1), eight(2)  

zxAnQosGlobalCosToQueue 1.3.6.1.4.1.3902.1082.50.1.2.2.1.4
The queues of CoS. For example, the value '01 01 02 03 04 06 06 07' means that the queue of CoS 5 is 6, ..., the queue of CoS 7 is 7. The range of each queue is 0 to 7. The number of queues is fixed to zxAnQosGlobalMaxQueues.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(8)  

zxAnQosGlobalQueueWeight 1.3.6.1.4.1.3902.1082.50.1.2.2.1.5
The weight of queues. For example, the value '01 02 04 06 02 02 02 02' means that the weight of queue0 is 1, ..., the weight of queue7 is 2. The range of each weight is 0 to 100. The number of queues is fixed to zxAnQosGlobalMaxQueues.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(8)  

zxAnQosGlobalQueueMode 1.3.6.1.4.1.3902.1082.50.1.2.2.1.6
The global queue mode configuration. pon(1) - The queue configuration is effective on PON interfaces. vportNormal(2) - The queue configuration is effective on VPort, the priority of unicast or multicast green packets is higher than yellow packets. Only four queues is supported. vportCir(3) - The queue configuration is effective on VPort, the priority of unicast green packets is higher than multicast packets, the priority of multicast packets is higher than yellow packets. vportPir(4) - The queue configuration is effective on VPort, the priority of unicast or multicast green packets is higher than yellow packets. Only eight queues is supported. vportNormalBidirectional(5) - The queue configuration supports egress or ingress direction based on vportNormal.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER pon(1), vportNormal(2), vportCir(3), vportPir(4), vportNormalBidirectional(5)  

zxAnQosGlobalQueueToQueue 1.3.6.1.4.1.3902.1082.50.1.2.2.1.7
The mapping of queue to queue. For example, the value '00 02 03 05' means that queue0 is mapping queue0, queue2 is mapping queue1, queue3 is mapping queue2, queue5 is mapping queue3. The range of each queue is 0 to 7. The number of queues is fixed to 4.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

zxAnQosGlbQStatShortInterval 1.3.6.1.4.1.3902.1082.50.1.2.2.1.8
The short interval of queue statistics.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..60  

zxAnQosGlbQStatLongInterval 1.3.6.1.4.1.3902.1082.50.1.2.2.1.9
The long interval of queue statistics.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 60..86400  

zxAnQosQueueConfPrfTable 1.3.6.1.4.1.3902.1082.50.1.2.2.7
QoS queue configuration profile table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnQosQueueConfPrfEntry

zxAnQosQueueConfPrfEntry 1.3.6.1.4.1.3902.1082.50.1.2.2.7.1
QoS queue configuration profile entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnQosQueueConfPrfEntry  

zxAnQosQueueConfPrfName 1.3.6.1.4.1.3902.1082.50.1.2.2.7.1.1
QoS queue configuration profile name.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..32)  

zxAnQosQueueConfDepthRatio 1.3.6.1.4.1.3902.1082.50.1.2.2.7.1.2
QoS queue depth ratio. For example, the value '01 02 04 06 02 02 02 50' means depth ratio of queue0 is 1, ..., depth ratio of queue7 is 80. The range of depth ratio is 1 to 100. The number of queues is fixed to zxAnQosGlobalMaxQueues.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(8)  

zxAnQosQueueConfBufferSize 1.3.6.1.4.1.3902.1082.50.1.2.2.7.1.3
QoS queue buffer size.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..102400  

zxAnQosQueueConfPrfRowStatus 1.3.6.1.4.1.3902.1082.50.1.2.2.7.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosQueueConfPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnQosQueueWredConfTable 1.3.6.1.4.1.3902.1082.50.1.2.2.30
WRED configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnQosQueueWredConfEntry

zxAnQosQueueWredConfEntry 1.3.6.1.4.1.3902.1082.50.1.2.2.30.1
WRED configuration entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnQosQueueWredConfEntry  

zxAnQosQWredConfQueueNo 1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.1
The No. of the queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..7  

zxAnQosQWredConfYellowLThresh 1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.2
The lower WRED threshold parameter of a threshold number for the yellow packet when WRED dropping algorithm is used.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..100  

zxAnQosQWredConfYellowHThresh 1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.3
The higher WRED threshold parameter of a threshold number for the yellow packets when WRED dropping algorithm is used.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..100  

zxAnQosQWredConfYellowMaxProb 1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.4
Maximum dropping probability of yellow packet.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..100  

zxAnQosQWredConfGreenLThresh 1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.5
The lower WRED threshold parameter of a threshold number for the green packet when WRED dropping algorithm is used.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..100  

zxAnQosQWredConfGreenHThresh 1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.6
The higher WRED threshold parameter of a threshold number for the green packet when WRED dropping algorithm is used.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..100  

zxAnQosQWredConfGreenMaxProb 1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.7
Maximum dropping probability of green packet.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..100  

zxAnQosIfObjects 1.3.6.1.4.1.3902.1082.50.1.2.3
OBJECT IDENTIFIER    

zxAnQosIfConfTable 1.3.6.1.4.1.3902.1082.50.1.2.3.2
This table contains configuration data for interface, include ethernet interface, GPON OLT and ONU interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnQosIfConfEntry

zxAnQosIfConfEntry 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1
An entry in zxAnQosIfConfTable. This table contains QoS configuration parameters for physical interface (include ethernet interface and GPON OLT interface) and GPON ONU interface. For ethernet interface, parameters can be configured include zxAnQosIfRateLimit, zxAnQosIfBucketSize, zxAnQosIfTrustMode, zxAnQosIfDefaultCos, zxAnQosIfDscpToDscpPrf, zxAnQosIfDscpToCosPrf, zxAnQosIfDscpToDropPrecedencePrf and zxAnQosIfQueueBlockPrf. Variables zxAnQosIfRateLimit and zxAnQosIfBucketSize must be configured bindingly. Notice that elements of zxAnQosQueueDepth in the configuring zxAnQosIfQueueBlockPrf should between 5 and 14, or all zreos. For ethernet interface of C600 series, parameters can be configured include zxAnQosIfTrustMode, zxAnQosIfDefaultCos, zxAnQosIfCosToCosPrf, zxAnQosIfDscpToDscpPrf, zxAnQosIfDscpToCosPrf, zxAnQosIfCosOverride, zxAnQosIfEgressCosToCosPrf, zxAnQosIfEgressDscpToCosPrf, and zxAnQosIfQueueConfPrf. For PTP interface, besides the parameters that can be configured to ethernet interface, three more parameters can be configured include zxAnQosIfIngressRateLimit, zxAnQosIfIngressBucketSize and zxAnQosIfQueueMapPrf. Variables zxAnQosIfIngressRateLimit and zxAnQosIfIngressBucketSize must be configured bindingly. Notice that zxAnQosIfQueueMapPrf configured to this interface, its zxAnQosQueueMapMode can only be set to cos or serviceType. For GPON OLT interface, parameters can be configured include zxAnQosIfQueueBlockPrf and zxAnQosIfQueueMapPrf. Notice that zxAnQosIfQueueMapPrf configured to this interface, its zxAnQosQueueMapMode can only be set to cos or serviceType. For GPON ONU interface, parameters can be configured include zxAnQosIfTrustMode, zxAnQosIfCosFilter, zxAnQosIfDefaultCos, zxAnQosIfEgressDefaultCos, zxAnQosIfCosToCosPrf, zxAnQosIfDscpToCosPrf, zxAnQosIfCosOverride, zxAnQosIfEgressCosOverride, zxAnQosIfQueueBlockPrf, zxAnQosIfQueueMapPrf, zxAnQosIfEgressCosToCosPrf and zxAnQosIfEgressDscpToCosPrf. For GPON ONU interface of C600 series, parameters can be configured include zxAnQosIfTrustMode, zxAnQosIfDefaultCos, zxAnQosIfCosToCosPrf, zxAnQosIfDscpToDscpPrf, zxAnQosIfDscpToCosPrf, zxAnQosIfCosOverride, zxAnQosIfEgressCosToCosPrf, zxAnQosIfEgressDscpToCosPrf, and zxAnQosIfQueueConfPrf.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnQosIfConfEntry  

zxAnQosIfTrustMode 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.3
Trust cos or trust dscp. Not support for gpon olt interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER cos(1), dscp(2), notSupport(255)  

zxAnQosIfDefaultCos 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.5
Default CoS, 255 means not support. This object is valid only when zxAnQosIfTrustMode is set to CoS.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7 | 255  

zxAnQosIfCosToCosPrf 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.7
CoS to CoS mapping profile name. An empty string means unsupported. Valid for gpon onu interface.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

zxAnQosIfDscpToDscpPrf 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.8
DSCP remarking profile name. This object is valid only when zxAnQosIfTrustMode is set to dscp. An empty string means unsupported.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

zxAnQosIfDscpToCosPrf 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.9
DSCP to CoS mapping profile name. This object is valid only when zxAnQosIfTrustMode is set to dscp. An empty string means unsupported.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

zxAnQosIfCosOverride 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.12
Enable or disable CoS Override.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), notSupport(255)  

zxAnQosIfEgressCosOverride 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.14
Enable or disable Egress CoS Override.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), notSupport(255)  

zxAnQosIfEgressCosToCosPrf 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.17
Egress CoS to CoS mapping profile name. An empty string means unsupported.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

zxAnQosIfEgressDscpToCosPrf 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.18
Egress DSCP to CoS mapping profile name. An empty string means unsupported.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

zxAnQosIfQueueWredPrf 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.23
Queue WRED profile name. An empty string means unsupported.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

zxAnQosIfQueueConfPrf 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.26
Queue configuration profile name. An empty string means unsupported.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

zxAnQosIfStatsObjects 1.3.6.1.4.1.3902.1082.50.1.2.4
OBJECT IDENTIFIER    

zxAnQosIfQueueStatsTable 1.3.6.1.4.1.3902.1082.50.1.2.4.1
Interfaces queue statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnQosIfQueueStatsEntry

zxAnQosIfQueueStatsEntry 1.3.6.1.4.1.3902.1082.50.1.2.4.1.1
An entry in zxAnQosIfQueueStatsTable. This table contains queue statistics for GPON OLT interfaces and P2P interfaces. It includes zxAnQosIfQueueStatsPassPkts, zxAnQosIfQueueStatsDiscardPkts and zxAnQosIfQueueStatsReset.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnQosIfQueueStatsEntry  

zxAnQosIfQueueStatsQueueId 1.3.6.1.4.1.3902.1082.50.1.2.4.1.1.1
Queue ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..7  

zxAnQosIfQueueStatsForwardPkts 1.3.6.1.4.1.3902.1082.50.1.2.4.1.1.2
Forwarding packets. Value 0x7fffffffffffffff means not supported.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnQosIfQueueStatsDiscardPkts 1.3.6.1.4.1.3902.1082.50.1.2.4.1.1.3
Discarded packets. Value 0x7fffffffffffffff means not supported.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnQosIfQueueDiscardGreenPkts 1.3.6.1.4.1.3902.1082.50.1.2.4.1.1.4
Discarded green packets. Value 0x7fffffffffffffff means not supported.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnQosIfQueueDiscardYellowPkts 1.3.6.1.4.1.3902.1082.50.1.2.4.1.1.5
Discarded yellow packets. Value 0x7fffffffffffffff means not supported.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnQosIfQueueStatsReset 1.3.6.1.4.1.3902.1082.50.1.2.4.1.1.50
Set the number of packets to zero. When getting this variable, this object always returns 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reset(1)  

zxAnQosBrgIfQueueStatsTable 1.3.6.1.4.1.3902.1082.50.1.2.4.2
A table containing queue statistics information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnQosBrgIfQueueStatsEntry

zxAnQosBrgIfQueueStatsEntry 1.3.6.1.4.1.3902.1082.50.1.2.4.2.1
An entry in zxAnQosBrgIfQueueStatsTable. This table contains queue statistics for bridge interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnQosBrgIfQueueStatsEntry  

zxAnQosBrgIfQStatsQueueId 1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.1
Queue ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..7  

zxAnQosBrgIfQStatsForwardPkts 1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.2
Forwarding packets. Value 0x7fffffffffffffff means not supported.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnQosBrgIfQStatsDiscardPkts 1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.3
Discarded packets. Value 0x7fffffffffffffff means not supported.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnQosBrgIfQDiscardGreenPkts 1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.4
Discarded green packets. Value 0x7fffffffffffffff means not supported.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnQosBrgIfQDiscardYellowPkts 1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.5
Discarded yellow packets. Value 0x7fffffffffffffff means not supported.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnQosBrgIfQStatsReset 1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.49
Set the number of packets to zero. When getting this variable, this object always returns 1.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER reset(1)  

zxAnQosBrgIfQStatsRowStatus 1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosBrgIfQueueStatsEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnQosIfQDiscardPktThreshTable 1.3.6.1.4.1.3902.1082.50.1.2.4.3
A table containing discarded packet threshold information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnQosIfQDiscardPktThreshEntry

zxAnQosIfQDiscardPktThreshEntry 1.3.6.1.4.1.3902.1082.50.1.2.4.3.1
An entry in zxAnQosIfQDiscardPktThreshTable. This table contains discarded packet threshold for queue statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnQosIfQDiscardPktThreshEntry  

zxAnQosIfQDiscardPktThrQueueId 1.3.6.1.4.1.3902.1082.50.1.2.4.3.1.1
Queue ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..7  

zxAnQosIfQShortDiscardPktThresh 1.3.6.1.4.1.3902.1082.50.1.2.4.3.1.2
Short interval discarded packet threshold.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

zxAnQosIfQLongDiscardPktThresh 1.3.6.1.4.1.3902.1082.50.1.2.4.3.1.3
Long interval discarded packet threshold.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

zxAnQosIfQDiscardPktThrRowStatus 1.3.6.1.4.1.3902.1082.50.1.2.4.3.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosIfQDiscardPktThreshEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnQosVlanObjects 1.3.6.1.4.1.3902.1082.50.1.2.5
OBJECT IDENTIFIER    

zxAnQosVlanCosToDeiPrfConfTable 1.3.6.1.4.1.3902.1082.50.1.2.5.2
A table containing VLAN CoS to DEI (Drop Eligible Indicator) profile information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnQosVlanCosToDeiPrfConfEntry

zxAnQosVlanCosToDeiPrfConfEntry 1.3.6.1.4.1.3902.1082.50.1.2.5.2.1
Entry for zxAnQosVlanCosToDeiPrfConfTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnQosVlanCosToDeiPrfConfEntry  

zxAnQosVlanCosToDeiPrfConfVid 1.3.6.1.4.1.3902.1082.50.1.2.5.2.1.1
VLAN ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanId  

zxAnQosVlanCosToDeiPrfConfName 1.3.6.1.4.1.3902.1082.50.1.2.5.2.1.2
CoS to DEI profile name.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..32)  

zxAnQosVlanCosToDeiPrfRowStatus 1.3.6.1.4.1.3902.1082.50.1.2.5.2.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in ZxAnVlanCosToDeiPrfConfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns 1.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnQosVlanEgressDeiTable 1.3.6.1.4.1.3902.1082.50.1.2.5.3
A table containing VLAN egress DEI information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnQosVlanEgressDeiEntry

zxAnQosVlanEgressDeiEntry 1.3.6.1.4.1.3902.1082.50.1.2.5.3.1
Entry for zxAnQosVlanEgressDeiTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnQosVlanEgressDeiEntry  

zxAnQosVlanEgressDeiVid 1.3.6.1.4.1.3902.1082.50.1.2.5.3.1.1
VLAN ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanId  

zxAnQosVlanEgressDeiRowStatus 1.3.6.1.4.1.3902.1082.50.1.2.5.3.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosVlanEgressDeiEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns 1.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnQosVlanCosToCosPrfConfTable 1.3.6.1.4.1.3902.1082.50.1.2.5.4
A table containing VLAN CoS remarking information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnQosVlanCosToCosPrfConfEntry

zxAnQosVlanCosToCosPrfConfEntry 1.3.6.1.4.1.3902.1082.50.1.2.5.4.1
Entry for zxAnQosVlanCosToCosPrfConfTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnQosVlanCosToCosPrfConfEntry  

zxAnQosVlanCosToCosPrfConfSVid 1.3.6.1.4.1.3902.1082.50.1.2.5.4.1.1
SVLAN ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanId  

zxAnQosVlanCosToCosPrfConfCVid 1.3.6.1.4.1.3902.1082.50.1.2.5.4.1.2
CVLAN ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..4094  

zxAnQosVlanCosToCosPrfConfMode 1.3.6.1.4.1.3902.1082.50.1.2.5.4.1.3
CoS remarking mode.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER networkSide(1), userSide(2)  

zxAnQosVlanCosToCosPrfConfName 1.3.6.1.4.1.3902.1082.50.1.2.5.4.1.4
CoS to CoS profile name.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..32)  

zxAnQosVlanCosToCosPrfRowStatus 1.3.6.1.4.1.3902.1082.50.1.2.5.4.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosVlanCosToCosPrfConfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns 1.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnQosConformance 1.3.6.1.4.1.3902.1082.50.1.4
OBJECT IDENTIFIER    

zxAnQosCompliances 1.3.6.1.4.1.3902.1082.50.1.4.1
OBJECT IDENTIFIER    

zxAnQosCompliance 1.3.6.1.4.1.3902.1082.50.1.4.1.1
The compliance statement for entities which implement the ZTE-AN-QOS-MIB.
Status: current Access: read-create
MODULE-COMPLIANCE    

zxAnQosGroups 1.3.6.1.4.1.3902.1082.50.1.4.2
OBJECT IDENTIFIER    

zxAnQosCosToCosPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.1
A collection of objects creating, modifying or deleting a CosToCosPrf.
Status: current Access: read-create
OBJECT-GROUP    

zxAnQosDscpToDscpPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.2
A collection of objects creating, modifying or deleting a DscpToDscpPrf.
Status: current Access: read-create
OBJECT-GROUP    

zxAnQosDscpToCosPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.3
A collection of objects creating, modifying or deleting a DscpToCosPrf.
Status: current Access: read-create
OBJECT-GROUP    

zxAnQosDscpToDropPrecedePrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.4
A collection of objects creating, modifying or deleting a DscpToDropPrf.
Status: current Access: read-create
OBJECT-GROUP    

zxAnQosMplsTcToCosPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.5
A collection of objects creating, modifying or deleting a MplsTcToCosPrf.
Status: current Access: read-create
OBJECT-GROUP    

zxAnQosCosToMplsTcPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.6
A collection of objects creating, modifying or deleting a CosToMplsTcPrf.
Status: current Access: read-create
OBJECT-GROUP    

zxAnQosEthCosToQueueGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.7
A collection of objects configuring cos-to-queue mapping for ethernet interface.
Status: current Access: read-create
OBJECT-GROUP    

zxAnQosQueueBlockPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.8
A collection of objects creating, modifying or deleting a QueueBlockPrf.
Status: current Access: read-create
OBJECT-GROUP    

zxAnQosQueueMapPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.9
A collection of objects creating, modifying or deleting a QueueMapPrf.
Status: current Access: read-create
OBJECT-GROUP    

zxAnQosIfTrafficShapeGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.10
A collection of objects configuring traffic-shaping for ethernet interface.
Status: current Access: read-create
OBJECT-GROUP    

zxAnQosIfTrustModeGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.11
A collection of objects configuring trust-mode for ethernet interface or gpon onu interface. For ethernet interface, when trust dscp, packets received will be modified according to the configured dscp-to-dscp-profile, dscp-to-cos-profile and dscp-to-drop-precedence-profile.
Status: current Access: read-create
OBJECT-GROUP    

zxAnQosIfDefaultCosGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.13
A collection of objects configuring default-cos value for ethernet interface. For ethernet interface, default-cos value is tagged for receiving untag packets.
Status: current Access: read-create
OBJECT-GROUP    

zxAnQosIfCosToCosPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.15
A collection of objects configuring cos-to-cos-profile for gpon onu interface. When trust cos, cos-to-cos-profile configured is valid.
Status: current Access: read-create
OBJECT-GROUP    

zxAnQosIfDscpToDscpPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.16
A collection of objects configuring dscp-to-dscp-profile for ethernet interface. When trust dscp, dscp-to-dscp-profile configured is valid.
Status: current Access: read-create
OBJECT-GROUP    

zxAnQosIfDscpToCosPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.17
A collection of objects configuring dscp-to-cos-profile for ethernet interface and gpon onu interface. When trust dscp, dscp-to-cos-profile configured is valid.
Status: current Access: read-create
OBJECT-GROUP    

zxAnQosIfDscpToDropPrePrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.18
A collection of objects configuring dscp-to-drop-profile for ethernet interface. When trust dscp, dscp-to-drop-profile configured is valid.
Status: current Access: read-create
OBJECT-GROUP    

zxAnQosIfEgressCosToCosPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.23
A collection of objects configuring cos-to-cos-profile for gpon onu interface. When trust cos, cos-to-cos-profile configured is valid.
Status: current Access: read-create
OBJECT-GROUP    

zxAnQosIfEgressDscpToCosPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.24
A collection of objects configuring dscp-to-cos-profile for gpon onu interface. When trust dscp, dscp-to-cos-profile configured is valid.
Status: current Access: read-create
OBJECT-GROUP    

zxAnQosIfQueueBlockPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.25
A queue-block profile configuring on ethernet interface, gpon olt interface.
Status: current Access: read-create
OBJECT-GROUP    

zxAnQosIfQueueMapPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.26
A queue-map profile configuring on gpon olt interface.
Status: current Access: read-create
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor