ZXR10-IP-IF-MIB

File: ZXR10-IP-IF-MIB.mib (11041 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC ZXR10-SMI
RFC1213-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
DisplayString TEXTUAL-CONVENTION RowStatus
IpAddress zxr10interfaces ifIndex

Defined Types

IpAddrAttr  
IP address type, the value of 1 indicates that the primary address, the value of 2 indicates that the secondary address
TEXTUAL-CONVENTION    
  INTEGER primary(1), secondary(2)  

Zxr10IPAddrEntry  
SEQUENCE    
  zxr10IPAddrPrimaryIp IpAddress
  zxr10IPAddrPrimaryIpMask IpAddress
  zxr10IPAddrBroadcast IpAddress
  zxr10IPAddrRowStatus RowStatus
  zxr10IPAddrIfName DisplayString

Zxr10IPSecondaryAddrEntry  
SEQUENCE    
  zxr10IPSecondaryAddr IpAddress
  zxr10IPSecondaryAddrMask IpAddress
  zxr10IPSecondaryAddrRowStatus RowStatus
  zxr10IPSecondaryIfName DisplayString

Zxr10IfIPAddrConfigEntry  
SEQUENCE    
  zxr10IfIPAddrConfigIfName DisplayString
  zxr10IfIPAddrConfigIfIndex Integer32
  zxr10IfIPAddrConfigIpAddrAttr IpAddrAttr
  zxr10IfIPAddrConfigIpAddr IpAddress
  zxr10IfIPAddrConfigIpMask IpAddress
  zxr10IfIPAddrConfigRowStatus RowStatus

Defined Values

zxr10IPIfMIB 1.3.6.1.4.1.3902.3.103.1
ZXROS v4.6.02 Interfaces config MIB
MODULE-IDENTITY    

zxr10IPIfMIBObjects 1.3.6.1.4.1.3902.3.103.1.1
OBJECT IDENTIFIER    

zxr10IPAddressConfiguration 1.3.6.1.4.1.3902.3.103.1.1.1
OBJECT IDENTIFIER    

zxr10IPAddrTable 1.3.6.1.4.1.3902.3.103.1.1.1.1
Ip address config table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10IPAddrEntry

zxr10IPAddrEntry 1.3.6.1.4.1.3902.3.103.1.1.1.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10IPAddrEntry  

zxr10IPAddrPrimaryIp 1.3.6.1.4.1.3902.3.103.1.1.1.1.1.1
The main Ip address on this interface
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

zxr10IPAddrPrimaryIpMask 1.3.6.1.4.1.3902.3.103.1.1.1.1.1.2
The mask of primary Ip address on this interface
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

zxr10IPAddrBroadcast 1.3.6.1.4.1.3902.3.103.1.1.1.1.1.3
The Broadcast address on this interface
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

zxr10IPAddrRowStatus 1.3.6.1.4.1.3902.3.103.1.1.1.1.1.4
This object is used to manage creation and deletion of rows in this table. zxr10IpAddrRowStatus must be set to 'creatAndGo' to create an entry and set to 'destroy' to delete an entry. The value in any column may be modified any time even the value of this entry rowStatus object is 'active'. Caution has to be taken before destroying any entry. Example: Need to change the IP address of an interface, which provides sole network connectivity. This has to be done by destroying the entry and creating a new one. The device would loose network connectivity after the entry is destroyed. In this case, the destroy of the old entry and the creation on the new entry should be packed in the same PDU.
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

zxr10IPAddrIfName 1.3.6.1.4.1.3902.3.103.1.1.1.1.1.5
Interface name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

zxr10IPSecondaryAddrTable 1.3.6.1.4.1.3902.3.103.1.1.1.2
Secondary Ip address config table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10IPSecondaryAddrEntry

zxr10IPSecondaryAddrEntry 1.3.6.1.4.1.3902.3.103.1.1.1.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10IPSecondaryAddrEntry  

zxr10IPSecondaryAddr 1.3.6.1.4.1.3902.3.103.1.1.1.2.1.1
Secondary Ip address on this interface
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

zxr10IPSecondaryAddrMask 1.3.6.1.4.1.3902.3.103.1.1.1.2.1.2
Secondary Ip mask on this interface
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

zxr10IPSecondaryAddrRowStatus 1.3.6.1.4.1.3902.3.103.1.1.1.2.1.3
This object is used to manage creation and deletion of rows in this table. zxr10SecondaryIpAddrRowStatus must be set to 'creatAndGo' to create an entry and set to 'destroy' to delete an entry. The value in any column may be modified any time even the value of this entry rowStatus object is 'active'. Caution has to be taken before destroying any entry. Example: Need to change the IP address of an interface, which provides sole network connectivity. This has to be done by destroying the entry and creating a new one. The device would loose network connectivity after the entry is destroyed. In this case, the destroy of the old entry and the creation on the new entry should be packed in the same PDU.
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

zxr10IPSecondaryIfName 1.3.6.1.4.1.3902.3.103.1.1.1.2.1.4
Interface name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

zxr10IfIPAddrConfigTable 1.3.6.1.4.1.3902.3.103.1.1.1.3
IP address config table ,just for vbui interfaces
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10IfIPAddrConfigEntry

zxr10IfIPAddrConfigEntry 1.3.6.1.4.1.3902.3.103.1.1.1.3.1
An entry for IP address config table, which is just used for vbui interfaces
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10IfIPAddrConfigEntry  

zxr10IfIPAddrConfigIfName 1.3.6.1.4.1.3902.3.103.1.1.1.3.1.1
The vbui interface name ,which has IP address(es)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..32)  

zxr10IfIPAddrConfigIfIndex 1.3.6.1.4.1.3902.3.103.1.1.1.3.1.2
The vbui interface index,which has IP address(es)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10IfIPAddrConfigIpAddrAttr 1.3.6.1.4.1.3902.3.103.1.1.1.3.1.3
The flag used to indicate Primary or Secondary IP address(es)
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddrAttr  

zxr10IfIPAddrConfigIpAddr 1.3.6.1.4.1.3902.3.103.1.1.1.3.1.4
The IP address of a vbui interface
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

zxr10IfIPAddrConfigIpMask 1.3.6.1.4.1.3902.3.103.1.1.1.3.1.5
The IP address mask of a vbui interface
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

zxr10IfIPAddrConfigRowStatus 1.3.6.1.4.1.3902.3.103.1.1.1.3.1.6
This object is used to manage creation and deletion of rows in this table
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus