ZXR10-MPLS-LDP-MIB

File: ZXR10-MPLS-LDP-MIB.mib (88564 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC MPLS-TC-STD-MIB
INET-ADDRESS-MIB

Imported symbols

OBJECT-TYPE MODULE-IDENTITY NOTIFICATION-TYPE
Counter32 Counter64 Unsigned32
enterprises IpAddress DisplayString
TimeStamp MplsLdpIdentifier InetAddressPrefixLength
InetAddressType InetAddress

Defined Types

Zxr10LdpFecEntry  
SEQUENCE    
  zxr10LdpFecIndex Unsigned32
  zxr10LdpFecType INTEGER
  zxr10LdpFecAddrType InetAddressType
  zxr10LdpFecAddr InetAddress
  zxr10LdpFecAddrLength InetAddressPrefixLength
  zxr10LdpFecState INTEGER
  zxr10LdpIngressOctets Counter64
  zxr10LdpIngressPackets Counter64
  zxr10LdpTransitOctets Counter64
  zxr10LdpTransitPackets Counter64
  zxr10LdpFecLspUp TimeStamp
  zxr10LdpFecLspDown TimeStamp
  zxr10LdpFecLspDownReason INTEGER
  zxr10LdpLostIngressOctets Counter64
  zxr10LdpLostIngressPackets Counter64
  zxr10LdpLostTransitOctets Counter64
  zxr10LdpLostTransitPackets Counter64

Zxr10LdpBfdEntry  
SEQUENCE    
  zxr10LdpBfdAddrType InetAddressType
  zxr10LdpBfdDstAddr InetAddress
  zxr10LdpBfdPrefixLength InetAddressPrefixLength
  zxr10LdpBfdMinTxInterval Unsigned32
  zxr10LdpBfdMinRxInterval Unsigned32
  zxr10LdpBfdMult Unsigned32
  zxr10LdpBfdLspEffect INTEGER
  zxr10LdpBfdIfUp INTEGER
  zxr10LdpBfdSrcAddr InetAddress
  zxr10LdpBfdProtectBind INTEGER

Zxr10LdpGrEntry  
SEQUENCE    
  zxr10LdpGrSessLocalId MplsLdpIdentifier
  zxr10LdpGrSessPeerId MplsLdpIdentifier
  zxr10LdpGrSessRestart INTEGER
  zxr10LdpGrSessNeighborLiveTime Unsigned32
  zxr10LdpGrSessMaxRecoveryTime Unsigned32
  zxr10LdpSessIsInGr INTEGER
  zxr10LdpGrSessState INTEGER
  zxr10LdpGrSessWaitTime Unsigned32

Zxr10LdpInterfaceEntry  
SEQUENCE    
  zxr10LdpInterfaceType InetAddressType
  zxr10LdpInterfaceIndex Unsigned32
  zxr10LdpInterfaceName DisplayString
  zxr10LdpInterfaceAddr InetAddress
  zxr10LdpInterfaceAdminStatus INTEGER
  zxr10LdpInterfaceOperStatus INTEGER
  zxr10LdpInterfaceTransAddress InetAddress
  zxr10LdpInterfaceTransAddrType InetAddressType

Zxr10LdpLabelAdvertiseEntry  
SEQUENCE    
  zxr10LdpLabelAdvertiseForACL DisplayString
  zxr10LdpLabelAdvertiseToAcl DisplayString

Zxr10LdpEntityHelloIntervEntry  
SEQUENCE    
  zxr10LdpEntityHelloLocalId MplsLdpIdentifier
  zxr10LdpEntityHelloPeerId MplsLdpIdentifier
  zxr10LdpEntityHelloMibIndex Unsigned32
  zxr10LdpEntityHelloIfIndex Unsigned32
  zxr10LdpEntityHelloNexthopAddrType InetAddressType
  zxr10LdpEntityHelloNexthopAddr InetAddress
  zxr10LdpEntityHelloHoldTimer Unsigned32
  zxr10LdpEntityHelloSendTimer Unsigned32

Zxr10LdpMd5Entry  
SEQUENCE    
  zxr10LdpMd5NeighborAddr IpAddress
  zxr10LdpMd5PwdFlag INTEGER
  zxr10LdpMd5Pwd DisplayString
  zxr10LdpMd5Encrypt INTEGER

Zxr10LdpSessEntry  
SEQUENCE    
  zxr10LdpSessLocalId MplsLdpIdentifier
  zxr10LdpSessPeerId MplsLdpIdentifier
  zxr10LdpSessHelloNumber Unsigned32
  zxr10LdpSessKeepAlive Unsigned32
  zxr10LdpSessCurBkoff Unsigned32
  zxr10LdpSessTcpRetry Unsigned32
  zxr10LdpSessLife Unsigned32
  zxr10LdpSessState INTEGER
  zxr10LdpSessIfName DisplayString
  zxr10LdpSessionUp TimeStamp
  zxr10LdpSessionDown TimeStamp
  zxr10LdpSessionDownReason INTEGER

Zxr10LdpInstCfgEntry  
SEQUENCE    
  zxr10LdpInstNo Unsigned32
  zxr10LdpFilterPaketFor DisplayString
  zxr10LdpGr INTEGER
  zxr10LdpGrMaxRecoveryTime Unsigned32
  zxr10LdpGrNeiLivenessTime Unsigned32
  zxr10LdpLabelRetentionMode INTEGER
  zxr10LdpLspControlMode INTEGER
  zxr10LdpTrafficCntAcl DisplayString
  zxr10LdpGlblAutoCfgMode INTEGER
  zxr10LdpV6TrafficCntAcl DisplayString
  zxr10LdpV6GlblAutoCfgMode INTEGER

Zxr10LdpV4IntfCfgEntry  
SEQUENCE    
  zxr10LdpV4IntfLdpInstNo Unsigned32
  zxr10LdpV4IntfName DisplayString
  zxr10LdpV4IntfLblDistributeMode INTEGER
  zxr10LdpV4IntfGtsm INTEGER

Zxr10LdpV6IntfCfgEntry  
SEQUENCE    
  zxr10LdpV6IntfLdpInstNo Unsigned32
  zxr10LdpV6IntfName DisplayString
  zxr10LdpV6IntfLblDistributeMode INTEGER

Zxr10LdpGtsmEntry  
SEQUENCE    
  zxr10LdpGtsmLdpInstNo Unsigned32
  zxr10LdpGtsmPeerLsrId IpAddress
  zxr10LdpGtsmHopCount Unsigned32

Zxr10LdpPeerBfdEntry  
SEQUENCE    
  zxr10LdpPeerBfdLdpInstNo Unsigned32
  zxr10LdpPeerBfdRemoteLsrId IpAddress
  zxr10LdpPeerBfdDelay INTEGER
  zxr10LdpPeerBfdTime Unsigned32

Zxr10LdpV4DisAutoCfgIntEntry  
SEQUENCE    
  zxr10LdpV4DisACIntfInstNo Unsigned32
  zxr10LdpV4DisACIntfName DisplayString

Zxr10LdpV6DisAutoCfgIntEntry  
SEQUENCE    
  zxr10LdpV6DisACIntfInstNo Unsigned32
  zxr10LdpV6DisACIntfName DisplayString

Zxr10LdpIgpSyncIntEntry  
SEQUENCE    
  zxr10LdpIgpSyncIntfInstNo Unsigned32
  zxr10LdpIgpSyncIntfName DisplayString

Defined Values

zxr10mplsLdpMIB 1.1.4.1.3902.3.314.1
This MIB contains managed object definitions for the 'Multiprotocol Label Switching, Label Distribution Protocol, LDP' document.
MODULE-IDENTITY    

zte 1.1.4.1.3902
OBJECT IDENTIFIER    

zxr10 1.1.4.1.3902.3
OBJECT IDENTIFIER    

zxr10MplsLdp 1.1.4.1.3902.3.314
OBJECT IDENTIFIER    

zxr10LdpLsrAttrObjects 1.1.4.1.3902.3.314.1.14
OBJECT IDENTIFIER    

zxr10LdpTrapVarsObject 1.1.4.1.3902.3.314.1.5
OBJECT IDENTIFIER    

zxr10LdpLspFec 1.1.4.1.3902.3.314.1.5.1
The LSP FEC in IP address format.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress  

zxr10LdpLspFecLen 1.1.4.1.3902.3.314.1.5.2
The length in bits of the LSP FEC prefix.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressPrefixLength  

zxr10LdpLspDownReason 1.1.4.1.3902.3.314.1.5.3
The reason why the LSP went down. Can be one of the following: the topology changed, the neighbor withdrew the label, the neighbor went down, the filter changed, the BFD session went down or the reason is unknown.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER null(0), topologyChanged(1), receivedWithdrawl(2), neighborDown(3), filterChanged(4), bfdSessionDown(5), unknown(6)  

zxr10LdpRtrid 1.1.4.1.3902.3.314.1.5.4
The router id of the sending router.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress  

zxr10LdpSesDownReason 1.1.4.1.3902.3.314.1.5.5
The reason why the session transitioned to nonexistent state. Can be one of the following: unknown reason, hold time expired, connection time expired, all adjacencies down, received bad tlv, received bad pdu, connection error, connection reset, received notification from peer, received unexpected end-of-file, clear mpls ldp, error during initialization, graceful restart was aborted or client command.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER null(0), holdExpired(1), connectionExpired(2), allAdjacenciesDown(3), badTLV(4), badPDU(5), connectionError(6), connectionReset(7), peerSentNotification(8), unexpectedEOF(9), clearneighbor(10), initError(11), gracefulRestartAbort(12), cliCommand(13), unknown(14)  

zxr10LdpOutIfName 1.1.4.1.3902.3.314.1.5.6
The name of the interface.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

zxr10LdpLspFecAddrType 1.1.4.1.3902.3.314.1.5.7
The Internet address type of the LSP FEC .
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressType  

zxr10LdpRtridAddrType 1.1.4.1.3902.3.314.1.5.8
The Internet address type of the router id .
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressType  

zxr10LdpFecTable 1.1.4.1.3902.3.314.1.6
Fec Table. This table contains one entry per fec table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10LdpFecEntry

zxr10LdpFecEntry 1.1.4.1.3902.3.314.1.6.1
The parameter of a fec entity containing statistics information about a particular LDP FEC.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10LdpFecEntry  

zxr10LdpFecIndex 1.1.4.1.3902.3.314.1.6.1.1
The index which uniquely identifies this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10LdpFecType 1.1.4.1.3902.3.314.1.6.1.2
The type of this LDP FEC. If the value of this object is 'indirect (0)' then the FEC type described by this row is for address prefixes and not included in local address list. If the value of this object is 'direct (1)' then the FEC type described by this row is for address prefixes and included in local address list. If the value of this object is 'me(2)' then the FEC type described by this row is for a host address. If the value of this object is 'invalid(3)' then the FEC value is 'FFFF'.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER indirect(0), direct(1), me(2), invalid(3)  

zxr10LdpFecAddrType 1.1.4.1.3902.3.314.1.6.1.3
The value of this object is the type of the Internet address. The value of this object, decides how the value of the zxr10LdpFecAddr object is interpreted.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

zxr10LdpFecAddr 1.1.4.1.3902.3.314.1.6.1.4
LDP FEC address.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

zxr10LdpFecAddrLength 1.1.4.1.3902.3.314.1.6.1.5
The LDP FEC length (in bits).
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressPrefixLength  

zxr10LdpFecState 1.1.4.1.3902.3.314.1.6.1.6
The state of this LDP FEC. If the FEC exists with the local popular tag and the outgoing label then the value of this object is 'ok(1)'. If the FEC exists with the local explicit or implicit null tag then the value of this object is 'egress(2)'. If the FEC exists with the local popluar tag only then the value of this object is 'noOutLabel(3)'. If the FEC exists without local tag then the value of this object is 'noInLabel(4)'.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), egress(2), noOutLabel(3), noInLabel(4)  

zxr10LdpIngressOctets 1.1.4.1.3902.3.314.1.6.1.7
The number of octets of traffic originated on this box, forwarded over the current LDP FEC. The number reported is not realtime and may be subject to several minutes delay. The delay is controllable by ldp statistics gathering interval, which by default is 5 minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxr10LdpIngressPackets 1.1.4.1.3902.3.314.1.6.1.8
The number of packets of traffic originated on this box, forwarded over the current LDP FEC. The number reported is not realtime and may be subject to several minutes delay. The delay is controllable by ldp statistics gathering interval, which by default is 5 minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxr10LdpTransitOctets 1.1.4.1.3902.3.314.1.6.1.9
The number of octets of traffic destined to this FEC, originated on a different box, forwarded over the current LDP FEC. The number reported is not realtime and may be subject to several minutes delay. The delay is controllable by ldp statistics gathering interval, which by default is 5 minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxr10LdpTransitPackets 1.1.4.1.3902.3.314.1.6.1.10
The number of packets of traffic destined to this FEC, originated on a different box, forwarded over the current LDP FEC. The number reported is not realtime and may be subject to several minutes delay. The delay is controllable by ldp statistics gathering interval, which by default is 5 minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxr10LdpFecLspUp 1.1.4.1.3902.3.314.1.6.1.11
The value of sysUpTime at the time of the most recent change in state of LSP about FEC from down to up. If no such changes have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

zxr10LdpFecLspDown 1.1.4.1.3902.3.314.1.6.1.12
The value of sysUpTime at the time of the most recent change in state of LSP about FEC from up to down. If no such changes have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

zxr10LdpFecLspDownReason 1.1.4.1.3902.3.314.1.6.1.13
The reason why the LSP went down about the most recent change in state of LSP from up to down. Can be one of the following: the topology changed, the neighbor withdrew the label, the neighbor went down, the filter changed, the BFD session went down or the reason is unknown. If no such changes have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER null(0), topologyChanged(1), receivedWithdrawl(2), neighborDown(3), filterChanged(4), bfdSessionDown(5), unknown(6)  

zxr10LdpLostIngressOctets 1.1.4.1.3902.3.314.1.6.1.14
The number of octets of traffic lost on this box, forwarded over the current LDP FEC. The number reported is not realtime and may be subject to several minutes delay. The delay is controllable by ldp statistics gathering interval, which by default is 5 minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxr10LdpLostIngressPackets 1.1.4.1.3902.3.314.1.6.1.15
The number of packets of traffic lost on this box, forwarded over the current LDP FEC. The number reported is not realtime and may be subject to several minutes delay. The delay is controllable by ldp statistics gathering interval, which by default is 5 minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxr10LdpLostTransitOctets 1.1.4.1.3902.3.314.1.6.1.16
The number of lost octets of traffic destined to this FEC, originated on a different box, forwarded over the current LDP FEC. The number reported is not realtime and may be subject to several minutes delay. The delay is controllable by ldp statistics gathering interval, which by default is 5 minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxr10LdpLostTransitPackets 1.1.4.1.3902.3.314.1.6.1.17
The number of lost packets of traffic destined to this FEC, originated on a different box, forwarded over the current LDP FEC. The number reported is not realtime and may be subject to several minutes delay. The delay is controllable by ldp statistics gathering interval, which by default is 5 minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxr10LdpBfdTable 1.1.4.1.3902.3.314.1.7
Bfd Table. This table contains one entry per bfd table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10LdpBfdEntry

zxr10LdpBfdEntry 1.1.4.1.3902.3.314.1.7.1
The parameter of a bfd entity.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10LdpBfdEntry  

zxr10LdpBfdAddrType 1.1.4.1.3902.3.314.1.7.1.1
The value of this object is the type of the Internet address. The value of this object, decides how the value of the zxr10LdpBfdDstAddr object is interpreted.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

zxr10LdpBfdDstAddr 1.1.4.1.3902.3.314.1.7.1.2
The address about FEC related to BFD.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress  

zxr10LdpBfdPrefixLength 1.1.4.1.3902.3.314.1.7.1.3
The mask length of the FEC related to BFD.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressPrefixLength  

zxr10LdpBfdMinTxInterval 1.1.4.1.3902.3.314.1.7.1.4
The time span that two control package is send.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10LdpBfdMinRxInterval 1.1.4.1.3902.3.314.1.7.1.5
The time span that two control package is received.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10LdpBfdMult 1.1.4.1.3902.3.314.1.7.1.6
If this parameter multiply zxr10LdpBfdMinRxInterval a control message is no received it means the lsp has some problem.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10LdpBfdLspEffect 1.1.4.1.3902.3.314.1.7.1.7
A fec needs bfd protection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(0)  

zxr10LdpBfdIfUp 1.1.4.1.3902.3.314.1.7.1.8
If the bfd is up.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

zxr10LdpBfdSrcAddr 1.1.4.1.3902.3.314.1.7.1.9
The source address specified with package of LSP PING.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

zxr10LdpBfdProtectBind 1.1.4.1.3902.3.314.1.7.1.10
FRR or ECMP protect bind flag. If the value is 1,then not support protect bind. If the value is 2,then support protect bind.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER false(1), true(2)  

zxr10LdpGrTable 1.1.4.1.3902.3.314.1.8
GR Table. This table contains one entry per GR table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10LdpGrEntry

zxr10LdpGrEntry 1.1.4.1.3902.3.314.1.8.1
The parameter of a GR entity about session.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10LdpGrEntry  

zxr10LdpGrSessLocalId 1.1.4.1.3902.3.314.1.8.1.1
The identifier of local lsr used to identify a session relating GR.
Status: current Access: read-only
OBJECT-TYPE    
  MplsLdpIdentifier  

zxr10LdpGrSessPeerId 1.1.4.1.3902.3.314.1.8.1.2
The identifier of peer lsr used to identify a session relating GR.
Status: current Access: read-only
OBJECT-TYPE    
  MplsLdpIdentifier  

zxr10LdpGrSessRestart 1.1.4.1.3902.3.314.1.8.1.3
If the session supports GR.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

zxr10LdpGrSessNeighborLiveTime 1.1.4.1.3902.3.314.1.8.1.4
The max time(seconds) of the lsr can wait to reconnect with peer lsr in GR process.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10LdpGrSessMaxRecoveryTime 1.1.4.1.3902.3.314.1.8.1.5
The max time(seconds) of the session mapping the label from the peer lsr after reconnect with peer lsr in GR process.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10LdpSessIsInGr 1.1.4.1.3902.3.314.1.8.1.6
If the session is in GR process.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

zxr10LdpGrSessState 1.1.4.1.3902.3.314.1.8.1.7
Indicates the status of the GR session.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(0), reconnect(1), recovery(2)  

zxr10LdpGrSessWaitTime 1.1.4.1.3902.3.314.1.8.1.8
The remaining time(seconds) of waiting for session reconnection and recovering in GR process. If the value of zxr10LdpSessIsInGr is false, then the value of this object is zero.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10LdpInterfaceTable 1.1.4.1.3902.3.314.1.9
Interface Table. This table contains one entry per interface table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10LdpInterfaceEntry

zxr10LdpInterfaceEntry 1.1.4.1.3902.3.314.1.9.1
The parameter of an interface entity relating LDP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10LdpInterfaceEntry  

zxr10LdpInterfaceType 1.1.4.1.3902.3.314.1.9.1.1
The value of this object is the type of the Internet address. The value of this object, decides how the value of the zxr10LdpInterfaceAddr object is interpreted.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

zxr10LdpInterfaceIndex 1.1.4.1.3902.3.314.1.9.1.2
The index of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10LdpInterfaceName 1.1.4.1.3902.3.314.1.9.1.3
The name of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10LdpInterfaceAddr 1.1.4.1.3902.3.314.1.9.1.4
The host ip address of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

zxr10LdpInterfaceAdminStatus 1.1.4.1.3902.3.314.1.9.1.5
The administer status of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER down(0), up(1)  

zxr10LdpInterfaceOperStatus 1.1.4.1.3902.3.314.1.9.1.6
The optrater status of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER down(0), up(1)  

zxr10LdpInterfaceTransAddress 1.1.4.1.3902.3.314.1.9.1.7
IP address to use for LDP transport address.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

zxr10LdpInterfaceTransAddrType 1.1.4.1.3902.3.314.1.9.1.8
The value of this object is the type of the Internet address. The value of this object, decides how the value of the zxr10LdpInterfaceTransAddress object is interpreted.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

zxr10LdpLabelAdvertiseTable 1.1.4.1.3902.3.314.1.10
Acl Table. This table contains one entry per acl table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10LdpLabelAdvertiseEntry

zxr10LdpLabelAdvertiseEntry 1.1.4.1.3902.3.314.1.10.1
The parameter of an acl entry relating label advertisement.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10LdpLabelAdvertiseEntry  

zxr10LdpLabelAdvertiseForACL 1.1.4.1.3902.3.314.1.10.1.1
The acl number used to filtrate which labels is acceptable.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10LdpLabelAdvertiseToAcl 1.1.4.1.3902.3.314.1.10.1.2
The acl number used to filtrate destination of the label sent.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10LdpEntityHelloIntervTable 1.1.4.1.3902.3.314.1.11
Hello Table. This table contains one entry per hello table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10LdpEntityHelloIntervEntry

zxr10LdpEntityHelloIntervEntry 1.1.4.1.3902.3.314.1.11.1
The parameter of a hello entity entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10LdpEntityHelloIntervEntry  

zxr10LdpEntityHelloLocalId 1.1.4.1.3902.3.314.1.11.1.1
The identifier of local lsr used to identify a session.
Status: current Access: read-only
OBJECT-TYPE    
  MplsLdpIdentifier  

zxr10LdpEntityHelloPeerId 1.1.4.1.3902.3.314.1.11.1.2
The identifier of peer lsr used to identify a session.
Status: current Access: read-only
OBJECT-TYPE    
  MplsLdpIdentifier  

zxr10LdpEntityHelloMibIndex 1.1.4.1.3902.3.314.1.11.1.3
An identifier for this specific adjacency.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10LdpEntityHelloIfIndex 1.1.4.1.3902.3.314.1.11.1.4
The index of interface about hello. If the value is 0xFFFFFFFF then the hello type is targeted-hello.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10LdpEntityHelloNexthopAddrType 1.1.4.1.3902.3.314.1.11.1.5
The value of this object is the type of the Internet address. The value of this object, decides how the value of the zxr10LdpEntityHelloNexthopAddr object is interpreted.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

zxr10LdpEntityHelloNexthopAddr 1.1.4.1.3902.3.314.1.11.1.6
The Nexthop Address about hello.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

zxr10LdpEntityHelloHoldTimer 1.1.4.1.3902.3.314.1.11.1.7
The max time between two recving hello message.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10LdpEntityHelloSendTimer 1.1.4.1.3902.3.314.1.11.1.8
The time span between two sending hello message.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10LdpMd5Table 1.1.4.1.3902.3.314.1.12
Ldp MD5 Table. This table contains one entry per MD5 table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10LdpMd5Entry

zxr10LdpMd5Entry 1.1.4.1.3902.3.314.1.12.1
The parameter of a MD5 entry containing information about the session set password.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10LdpMd5Entry  

zxr10LdpMd5NeighborAddr 1.1.4.1.3902.3.314.1.12.1.1
The peer address as the index of MD5.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

zxr10LdpMd5PwdFlag 1.1.4.1.3902.3.314.1.12.1.2
If the MD5 is successfully registered.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER nopwd(0), withpwd(1)  

zxr10LdpMd5Pwd 1.1.4.1.3902.3.314.1.12.1.3
The password used for communication between lsrs.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10LdpMd5Encrypt 1.1.4.1.3902.3.314.1.12.1.4
The password is encrypted.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

zxr10LdpSessTable 1.1.4.1.3902.3.314.1.13
Ldp Session Table. This table contains one entry per session if it is successfully registered.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10LdpSessEntry

zxr10LdpSessEntry 1.1.4.1.3902.3.314.1.13.1
The parameter of a session entry containing information about the session.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10LdpSessEntry  

zxr10LdpSessLocalId 1.1.4.1.3902.3.314.1.13.1.1
The identifier of local lsr used to identify a session.
Status: current Access: read-only
OBJECT-TYPE    
  MplsLdpIdentifier  

zxr10LdpSessPeerId 1.1.4.1.3902.3.314.1.13.1.2
The identifier of peer lsr used to identify a session.
Status: current Access: read-only
OBJECT-TYPE    
  MplsLdpIdentifier  

zxr10LdpSessHelloNumber 1.1.4.1.3902.3.314.1.13.1.3
The hello adjacency numbers of the session.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10LdpSessKeepAlive 1.1.4.1.3902.3.314.1.13.1.4
The time show how long the session should be keep alive if no ldp message or the session disappeared.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10LdpSessCurBkoff 1.1.4.1.3902.3.314.1.13.1.5
The time shows how long the session should wait to try to reconnect with peer lsr.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10LdpSessTcpRetry 1.1.4.1.3902.3.314.1.13.1.6
The time of the lsr retry to create a session with peer lsr.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10LdpSessLife 1.1.4.1.3902.3.314.1.13.1.7
The time after the session receive last ldp message.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10LdpSessState 1.1.4.1.3902.3.314.1.13.1.8
Indicates the status of the session.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER nonexistent(1), initialized(2), openrec(3), opensent(4), operational(5), tcpconnawaited(6)  

zxr10LdpSessIfName 1.1.4.1.3902.3.314.1.13.1.9
The name of the interface about session up or down. And the value of object is 'null' When target session sets up.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10LdpSessionUp 1.1.4.1.3902.3.314.1.13.1.10
The value of sysUpTime at the time of the most recent change in state of session from openrec(3) or opensent(4) to operational(5). If no such changes have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

zxr10LdpSessionDown 1.1.4.1.3902.3.314.1.13.1.11
The value of sysUpTime at the time of the most recent change in state of session from operational(5) to nonexistent(1). If no such changes have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

zxr10LdpSessionDownReason 1.1.4.1.3902.3.314.1.13.1.12
The reason why the session transitioned from operational to nonexistent state. Can be one of the following: unknown reason, hold time expired, connection time expired, all adjacencies down, received bad tlv, received bad pdu, connection error, connection reset, received notification from peer, received unexpected end-of-file, clear mpls ldp, error during initialization, graceful restart was aborted or client command. If no such changes have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER null(0), holdExpired(1), connectionExpired(2), allAdjacenciesDown(3), badTLV(4), badPDU(5), connectionError(6), connectionReset(7), peerSentNotification(8), unexpectedEOF(9), clearneighbor(10), initError(11), gracefulRestartAbort(12), cliCommand(13), unknown(14)  

zxr10LdpLsrId 1.1.4.1.3902.3.314.1.14.1
The router id of the LSR.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

zxr10LdpInstanceName 1.1.4.1.3902.3.314.1.14.2
The name of the VPN instance.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10LdpMplsIp 1.1.4.1.3902.3.314.1.14.3
Show if the mpls ldp is up.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

zxr10LdpTrap 1.1.4.1.3902.3.314.1.14.4
If the value of this object is 1, then the function of Ldp Trap is enable.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

zxr10LdpAccessFecACL 1.1.4.1.3902.3.314.1.14.5
The ACL name about LDP fec filter.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10LdpAccessFecBgp 1.1.4.1.3902.3.314.1.14.6
If the value of this object is 1, then access bgp route as fec.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

zxr10LdpAccessFecHost 1.1.4.1.3902.3.314.1.14.7
If the value of this object is 1, then access host route as fec only.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

zxr10LdpDirectHelloHoldTime 1.1.4.1.3902.3.314.1.14.8
LDP discovery direct hello holdtime. A value of 0 means the default, which is 15 seconds for Link Hellos and 45 seconds for Targeted Hellos. A value of 65535 indicates an infinite hello hold time.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

zxr10LdpDirectHelloInterTime 1.1.4.1.3902.3.314.1.14.9
LDP discovery direct hello interval. A value of 0 means the default, which is 5 seconds for Link Hellos and 15 seconds for Targeted Hellos. A value of 65535 indicates an infinite hello interval time.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

zxr10LdpTargetHelloHoldTime 1.1.4.1.3902.3.314.1.14.10
LDP discovery target hello holdtime. A value of 0 means the default, which is 15 seconds for Link Hellos and 45 seconds for Targeted Hellos. A value of 65535 indicates an infinite hello hold time.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

zxr10LdpTargetHelloInterTime 1.1.4.1.3902.3.314.1.14.11
LDP discovery target hello interval. A value of 0 means the default, which is 5 seconds for Link Hellos and 15 seconds for Targeted Hellos. A value of 65535 indicates an infinite hello interval time.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

zxr10LdpBackoffInitialTime 1.1.4.1.3902.3.314.1.14.12
Initial session backoff time in seconds. A value of 0 means the default, which is 15 seconds for Initial backoff time and 120 seconds for Maximum backoff time. A value of 65535 indicates an infinite backoff time.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

zxr10LdpBackoffMaximumTime 1.1.4.1.3902.3.314.1.14.13
Maximum session backoff time in seconds. A value of 0 means the default, which is 15 seconds for Initial backoff time and 120 seconds for Maximum backoff time. A value of 65535 indicates an infinite backoff time.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

zxr10LdpEgressFor 1.1.4.1.3902.3.314.1.14.14
Acl specifying controls on destination prefixes.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10LdpEgressNextHop 1.1.4.1.3902.3.314.1.14.15
Acl specifying controls on nexthop.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10LdpConnWithDod 1.1.4.1.3902.3.314.1.14.16
If the value of this object is 1, then the LDP connect with dod mode LSR is enable.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

zxr10LdpExplicitNull 1.1.4.1.3902.3.314.1.14.17
If the value of this object is 1, then advertise explicit null label in place of implicit null.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

zxr10LdpExplicitNullFor 1.1.4.1.3902.3.314.1.14.18
Acl specifying controls on destination prefixes.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10LdpExplicitNullTo 1.1.4.1.3902.3.314.1.14.19
Acl specifying controls on LDP peers.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10LdpHoldTime 1.1.4.1.3902.3.314.1.14.20
LDP session holdtime is set. A value of 0 means the default, which is 15 seconds for session holdtime. A value of 65535 indicates an infinite hold time.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

zxr10LdpLabelRequestFor 1.1.4.1.3902.3.314.1.14.21
ACL name about specify acceptable downstream on demand dest.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10LdpLabelAdvertise 1.1.4.1.3902.3.314.1.14.22
If the value of this object is 1, then label advertise is enable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

zxr10LdpLabelAdvertiseOldStyle 1.1.4.1.3902.3.314.1.14.23
If the value of this object is 1, then label advertise use old style(TDP) method for matching prefix acl.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

zxr10LdpStyle 1.1.4.1.3902.3.314.1.14.24
If the value of this object is 1, then the new style to reset keepalive timer is enable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

zxr10LdpDebugAdvertisements 1.1.4.1.3902.3.314.1.14.25
If the value of this object is 1, then LDP debug information of label and address advertisements could be get.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

zxr10LdpDebugBindings 1.1.4.1.3902.3.314.1.14.26
If the value of this object is 1, then LDP debug information of Label bindings and other label Information base (LIB) changes could be get.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

zxr10LdpDebugMessagesReceived 1.1.4.1.3902.3.314.1.14.27
If the value of this object is 1, then LDP debug information of LDP received messages, including periodic keep alive could be get.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

zxr10LdpDebugMessagesSent 1.1.4.1.3902.3.314.1.14.28
If the value of this object is 1, then LDP debug information of LDP sent messages, including periodic keep alive could be get.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

zxr10LdpDebugSessionIO 1.1.4.1.3902.3.314.1.14.29
If the value of this object is 1, then LDP debug information of session could be get.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

zxr10LdpDebugSessionStateMachine 1.1.4.1.3902.3.314.1.14.30
If the value of this object is 1, then LDP debug information of session state machine could be get.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

zxr10LdpDebugTransportConnections 1.1.4.1.3902.3.314.1.14.31
If the value of this object is 1, then LDP debug information of transport and discovery connections could be get.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

zxr10LdpDebugTransportEvents 1.1.4.1.3902.3.314.1.14.32
If the value of this object is 1, then LDP debug information of transport and discovery events could be get.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

zxr10LdpInstanceNo 1.1.4.1.3902.3.314.1.14.33
The Number of the LDP instance. If the value of this object is 0, then don't exist LDP public instance
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

zxr10LdpRouterIdIf 1.1.4.1.3902.3.314.1.14.34
The interface selected to prefer for LDP identifier address.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10LdpNotify 1.1.4.1.3902.3.314.1.15
OBJECT IDENTIFIER    

zxr10LdpSesUp 1.1.4.1.3902.3.314.1.15.1
The SNMP trap that is generated when the value of 'zxr10MplsLdpSesState' enters the 'operational(5) state.
Status: current Access: read-only
NOTIFICATION-TYPE    

zxr10LdpSesDown 1.1.4.1.3902.3.314.1.15.2
The SNMP trap that is generated when the value of 'zxr10MplsLdpSesState' leaves the 'operational(5) state. The value of zxr10LdpSesDownIf is one of the neighbor's interface. It is the interface associated with the last neighbor when zxr10LdpSesDownReason is allAdjacenciesDown (3).
Status: current Access: read-only
NOTIFICATION-TYPE    

zxr10LdpLspUp 1.1.4.1.3902.3.314.1.15.3
The SNMP trap that is generated when an LSP comes up.
Status: current Access: read-only
NOTIFICATION-TYPE    

zxr10LdpLspDown 1.1.4.1.3902.3.314.1.15.4
The SNMP trap that is generated when the LSP goes down.
Status: current Access: read-only
NOTIFICATION-TYPE    

zxr10LdpLspPathUp 1.1.4.1.3902.3.314.1.15.5
An mplsLspPathUp trap signifies that the specified path mplsPathName for the specified LSP mplsLspName came up.
Status: current Access: read-only
NOTIFICATION-TYPE    

zxr10LdpLspPathDown 1.1.4.1.3902.3.314.1.15.6
An mplsLspPathDown trap signifies that the specified path mplsPathName for the specified LSP mplsLspName went down.
Status: current Access: read-only
NOTIFICATION-TYPE    

zxr10LdpLspChange 1.1.4.1.3902.3.314.1.15.7
An mplsLspChange trap signifies that the specified LSP has switched traffic to the new active path 'toLspPath'. The LSP maintains up state before and after the switch over.
Status: current Access: read-only
NOTIFICATION-TYPE    

zxr10LdpInstCfgTable 1.1.4.1.3902.3.314.1.16
Ldp Instance Table. This table contains one entry per instance table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10LdpInstCfgEntry

zxr10LdpInstCfgEntry 1.1.4.1.3902.3.314.1.16.1
The parameter of an instance entity about ldp instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10LdpInstCfgEntry  

zxr10LdpInstNo 1.1.4.1.3902.3.314.1.16.1.1
The Number of the LDP instance. If the value of this object is 0, then don't exist LDP public instance
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..65535  

zxr10LdpFilterPaketFor 1.1.4.1.3902.3.314.1.16.1.2
ACL name about specify filter packet on source address.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10LdpGr 1.1.4.1.3902.3.314.1.16.1.3
Show if the mpls ldp graceful-restart is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

zxr10LdpGrMaxRecoveryTime 1.1.4.1.3902.3.314.1.16.1.4
LDP session max recovery time is set. Default is 120 seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 15..600  

zxr10LdpGrNeiLivenessTime 1.1.4.1.3902.3.314.1.16.1.5
LDP session keeps its stale label-FEC bindings is set. Default is 120 seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 5..300  

zxr10LdpLabelRetentionMode 1.1.4.1.3902.3.314.1.16.1.6
Show the mpls ldp label retention mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER conservative(1), liberal(2)  

zxr10LdpLspControlMode 1.1.4.1.3902.3.314.1.16.1.7
Show the mpls ldp lsp control mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ordered(1), independent(2)  

zxr10LdpTrafficCntAcl 1.1.4.1.3902.3.314.1.16.1.8
ACL name about specify IPv4 fec want to get traffic count.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10LdpGlblAutoCfgMode 1.1.4.1.3902.3.314.1.16.1.9
Show the mpls ldp IPv4 interface global auto config mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

zxr10LdpV6TrafficCntAcl 1.1.4.1.3902.3.314.1.16.1.10
ACL name about specify IPv6 fec want to get traffic count.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10LdpV6GlblAutoCfgMode 1.1.4.1.3902.3.314.1.16.1.11
Show the mpls ldp IPv6 interface global auto config mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

zxr10LdpV4IntfCfgTable 1.1.4.1.3902.3.314.1.17
Ipv4 Ldp Interface Table. This table contains one entry per v4 interface table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10LdpV4IntfCfgEntry

zxr10LdpV4IntfCfgEntry 1.1.4.1.3902.3.314.1.17.1
The parameter of a v4 interface entity.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10LdpV4IntfCfgEntry  

zxr10LdpV4IntfLdpInstNo 1.1.4.1.3902.3.314.1.17.1.1
The Number of the LDP instance. If the value of this object is 0, then don't exist LDP public instance
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..65535  

zxr10LdpV4IntfName 1.1.4.1.3902.3.314.1.17.1.2
The name of the interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

zxr10LdpV4IntfLblDistributeMode 1.1.4.1.3902.3.314.1.17.1.3
The distribution mode of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dod(1), du(2)  

zxr10LdpV4IntfGtsm 1.1.4.1.3902.3.314.1.17.1.4
The gtsm of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

zxr10LdpV6IntfCfgTable 1.1.4.1.3902.3.314.1.18
Ipv6 Ldp Interface Table. This table contains one entry per v6 interface table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10LdpV6IntfCfgEntry

zxr10LdpV6IntfCfgEntry 1.1.4.1.3902.3.314.1.18.1
The parameter of a v6 interface entity.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10LdpV6IntfCfgEntry  

zxr10LdpV6IntfLdpInstNo 1.1.4.1.3902.3.314.1.18.1.1
The Number of the LDP instance. If the value of this object is 0, then don't exist LDP public instance
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..65535  

zxr10LdpV6IntfName 1.1.4.1.3902.3.314.1.18.1.2
The name of the interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

zxr10LdpV6IntfLblDistributeMode 1.1.4.1.3902.3.314.1.18.1.3
The distribution mode of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dod(1), du(2)  

zxr10LdpGtsmTable 1.1.4.1.3902.3.314.1.19
Gtsm Table. This table contains one entry per gtsm table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10LdpGtsmEntry

zxr10LdpGtsmEntry 1.1.4.1.3902.3.314.1.19.1
The parameter of a gtsm entity.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10LdpGtsmEntry  

zxr10LdpGtsmLdpInstNo 1.1.4.1.3902.3.314.1.19.1.1
The Number of the LDP instance. If the value of this object is 0, then don't exist LDP public instance
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..65535  

zxr10LdpGtsmPeerLsrId 1.1.4.1.3902.3.314.1.19.1.2
The identifier of peer lsr used to identify a session.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

zxr10LdpGtsmHopCount 1.1.4.1.3902.3.314.1.19.1.3
The gtsm hop count of the ldp hello.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..254  

zxr10LdpPeerBfdTable 1.1.4.1.3902.3.314.1.20
LDP Peer Bfd Table. This table contains one entry per peer bfd table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10LdpPeerBfdEntry

zxr10LdpPeerBfdEntry 1.1.4.1.3902.3.314.1.20.1
The parameter of a peer bfd entity containing statistics information about a particular peer bfd.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10LdpPeerBfdEntry  

zxr10LdpPeerBfdLdpInstNo 1.1.4.1.3902.3.314.1.20.1.1
The Number of the LDP instance. If the value of this object is 0, then don't exist LDP public instance
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..65535  

zxr10LdpPeerBfdRemoteLsrId 1.1.4.1.3902.3.314.1.20.1.2
The identifier of peer lsr used to identify a session.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

zxr10LdpPeerBfdDelay 1.1.4.1.3902.3.314.1.20.1.3
If the value of this object is 1, then the Ldp Peer Bfd Creat Delay is enable, the default delay time is 60 seconds. IF the value of this object is 2, then the Ldp Peer Bfd Delay is disable, Set Ldp Peer Bfd immediately.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

zxr10LdpPeerBfdTime 1.1.4.1.3902.3.314.1.20.1.4
Set delay time, the prerequisite is the value of zxr10LdpPeerBfdDelay is 1.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..720  

zxr10LdpV4DisAutoCfgIntTable 1.1.4.1.3902.3.314.1.21
Ldp Ipv4 Dis-auto-config Interface Table. This table contains one entry per v4 dis-auto-config interface table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10LdpV4DisAutoCfgIntEntry

zxr10LdpV4DisAutoCfgIntEntry 1.1.4.1.3902.3.314.1.21.1
The parameter of a v4 dis-auto-config interface entity.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10LdpV4DisAutoCfgIntEntry  

zxr10LdpV4DisACIntfInstNo 1.1.4.1.3902.3.314.1.21.1.1
The Number of the LDP instance. If the value of this object is 0, then don't exist LDP public instance
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..65535  

zxr10LdpV4DisACIntfName 1.1.4.1.3902.3.314.1.21.1.2
The name of the dis-auto-config interface.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10LdpV6DisAutoCfgIntTable 1.1.4.1.3902.3.314.1.22
Ldp IPv6 Dis-auto-config Interface Table. This table contains one entry per V6 dis-auto-config interface table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10LdpV6DisAutoCfgIntEntry

zxr10LdpV6DisAutoCfgIntEntry 1.1.4.1.3902.3.314.1.22.1
The parameter of a V6 dis-auto-config interface entity.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10LdpV6DisAutoCfgIntEntry  

zxr10LdpV6DisACIntfInstNo 1.1.4.1.3902.3.314.1.22.1.1
The Number of the LDP instance. If the value of this object is 0, then don't exist LDP public instance
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..65535  

zxr10LdpV6DisACIntfName 1.1.4.1.3902.3.314.1.22.1.2
The name of the dis-auto-config interface.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10LdpIgpSyncIntTable 1.1.4.1.3902.3.314.1.23
Ldp Enable Igp Synchronization Interface Table. This table contains one entry per igp sync interface table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10LdpIgpSyncIntEntry

zxr10LdpIgpSyncIntEntry 1.1.4.1.3902.3.314.1.23.1
The parameter of a igp synchronization interface entity.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10LdpIgpSyncIntEntry  

zxr10LdpIgpSyncIntfInstNo 1.1.4.1.3902.3.314.1.23.1.1
The Number of the LDP instance. If the value of this object is 0, then don't exist LDP public instance
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..65535  

zxr10LdpIgpSyncIntfName 1.1.4.1.3902.3.314.1.23.1.2
The name of enable igp synchronization interface.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString