ZXR10-PTP-MIB

File: ZXR10-PTP-MIB.mib (62295 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC ZXR10-SMI

Imported symbols

OBJECT-TYPE MODULE-IDENTITY Integer32
Unsigned32 enterprises IpAddress
Counter64 DisplayString RowStatus
zxr10 zxr10protocol

Defined Types

Zxr10ptpIntfConfEntry  
SEQUENCE    
  zxr10PTPPortIndex Integer32
  zxr10PTPPortConfigName DisplayString
  zxr10PTPPortConfigEnable INTEGER
  zxr10PTPPortConfigState INTEGER
  zxr10PTPPortConfigSyncInterval Integer32
  zxr10PTPPortConfigDelayReqInterval Integer32
  zxr10PTPPortConfigMultiDomainEnable INTEGER
  zxr10PTPPortConfigDelayMech INTEGER
  zxr10PTPPortNetProtocol INTEGER
  zxr10PTPPortPacketMechanism INTEGER
  zxr10PTPShowPortState INTEGER
  zxr10PTPPortConfigTransEnable INTEGER
  zxr10PTPPortUnSymmetry Unsigned32
  zxr10PTPPortUnSign INTEGER
  zxr10PTPPortVlanId Integer32
  zxr10PTPPortSourceName DisplayString
  zxr10PTPPortPDelayReqInterval Integer32
  zxr10PTPPortNum Integer32
  zxr10PTPPortConfigRowStatus RowStatus

Zxr10ptpPortCfgEntry  
SEQUENCE    
  zxr10ptpPortCfgIfName DisplayString
  zxr10ptpPortCfgPortType INTEGER
  zxr10ptpPortCfgPortNum Integer32
  zxr10ptpPortCfgEnable INTEGER
  zxr10ptpPortCfgState INTEGER
  zxr10ptpPortCfgSyncInterval Integer32
  zxr10ptpPortCfgDelayReqInterval Integer32
  zxr10ptpPortCfgMultiDomainEnable INTEGER
  zxr10ptpPortCfgDelayMech INTEGER
  zxr10ptpPortCfgNetProtocol INTEGER
  zxr10ptpPortCfgTransmitMode INTEGER
  zxr10ptpPortCfgUnSymmetry Unsigned32
  zxr10ptpPortCfgUnSign INTEGER
  zxr10ptpPortCfgVlanId Integer32
  zxr10ptpPortCfgSourceName DisplayString
  zxr10ptpPortCfgPDelayReqInterval Integer32
  zxr10ptpPortCfgPktStatistic INTEGER
  zxr10ptpPortCfgWorkMode INTEGER
  zxr10ptpPortCfgVlanPriority INTEGER
  zxr10ptpPortCfgUniNegoDura INTEGER
  zxr10ptpPortCfgRowStatus RowStatus

Zxr10ptpEthPortEntry  
SEQUENCE    
  zxr10PTPEthPortName DisplayString
  zxr10PTPEthPortConfigEnable INTEGER
  zxr10PTPEthPortUnSymmetry Unsigned32
  zxr10PTPEthPortUnSign INTEGER
  zxr10PTPEthPortRowStatus RowStatus

Zxr10ptpDstIpConfEntry  
SEQUENCE    
  zxr10PTPDestIpPortName DisplayString
  zxr10PTPDestIpPortType INTEGER
  zxr10PTPDestIpIndex IpAddress
  zxr10PTPDestIpPortNum INTEGER
  zxr10PTPDestIpAlternatePriority1 INTEGER
  zxr10PTPDestIpPortMode INTEGER
  zxr10PTPDestIpRowStatus RowStatus

Zxr10ptpIpListConfEntry  
SEQUENCE    
  zxr10PTPIpListConfig IpAddress
  zxr10PTPIpListRowStatus RowStatus

Zxr10ptpTimeSrcCfgEntry  
SEQUENCE    
  zxr10PTPTimeSrcCfgIfname DisplayString
  zxr10PTPTimeSrcCfgPri1 Integer32
  zxr10PTPTimeSrcCfgPri2 Integer32
  zxr10PTPTimeSrcCfgRowStatus RowStatus

Zxr10ptpPortShowEntry  
SEQUENCE    
  zxr10ptpPortShowIfName DisplayString
  zxr10ptpPortShowPortType INTEGER
  zxr10ptpPortShowPortNum Integer32
  zxr10ptpPortShowPortState INTEGER

Zxr10ptpPortEntry  
SEQUENCE    
  zxr10ptpPortIfName DisplayString
  zxr10ptpPortType INTEGER
  zxr10ptpPortIndexVlanid Unsigned32
  zxr10ptpPortNum Integer32
  zxr10ptpPortEnable INTEGER
  zxr10ptpPortState INTEGER
  zxr10ptpPortSyncInterval Integer32
  zxr10ptpPortDelayReqInterval Integer32
  zxr10ptpPortMultiDomainEnable INTEGER
  zxr10ptpPortDelayMech INTEGER
  zxr10ptpPortNetProtocol INTEGER
  zxr10ptpPortTransmitMode INTEGER
  zxr10ptpPortUnSymmetry Unsigned32
  zxr10ptpPortUnSign INTEGER
  zxr10ptpPortVlanId Integer32
  zxr10ptpPortSourceName DisplayString
  zxr10ptpPortPDelayReqInterval Integer32
  zxr10ptpPortPktStatistic INTEGER
  zxr10ptpPortWorkMode INTEGER
  zxr10ptpPortVlanPriority INTEGER
  zxr10ptpPortUniNegoDura INTEGER

Zxr10ptpAcceptDstIpEntry  
SEQUENCE    
  zxr10PTPAcceptDestIpPortName DisplayString
  zxr10PTPAcceptDestIpPortType INTEGER
  zxr10PTPAcceptDestIpIndex IpAddress
  zxr10ptpAcceptDestIpVlanid Unsigned32
  zxr10PTPAcceptDestIpPortNum INTEGER
  zxr10PTPAcceptDestIpPriority1 INTEGER
  zxr10PTPAcceptDestIpPortMode INTEGER

Defined Values

zxr10ptp 1.3.6.1.4.1.3902.3.101.10
The MIB module to describe the PTP protocol
MODULE-IDENTITY    

zte 1.3.6.1.4.1.3902
OBJECT IDENTIFIER    

zxr10 1.3.6.1.4.1.3902.3
OBJECT IDENTIFIER    

zxr10protocol 1.3.6.1.4.1.3902.3.101
OBJECT IDENTIFIER    

zxr10ptpConfig 1.3.6.1.4.1.3902.3.101.10.1
OBJECT IDENTIFIER    

zxr10ptpDomain 1.3.6.1.4.1.3902.3.101.10.2
OBJECT IDENTIFIER    

zxr10ptpShow 1.3.6.1.4.1.3902.3.101.10.3
OBJECT IDENTIFIER    

zxr10ptpInit 1.3.6.1.4.1.3902.3.101.10.10
OBJECT IDENTIFIER    

zxr10PTPConfigStateAlg 1.3.6.1.4.1.3902.3.101.10.1.1
The PTP port state mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER manual(1), bmc(2)  

zxr10PTPConfigClkMode 1.3.6.1.4.1.3902.3.101.10.1.2
The ptp clock type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER oc(1), bc(2), p2ptc(4), p2ptcoc(5), e2etc(8), e2etcoc(9)  

zxr10PTPConfigTSC 1.3.6.1.4.1.3902.3.101.10.1.3
The two-step attribution is true or not, t8000\M6k only support one-step.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

zxr10PTPConfigSO 1.3.6.1.4.1.3902.3.101.10.1.4
The slave_only attribution is true or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

zxr10PTPConfigPriority1 1.3.6.1.4.1.3902.3.101.10.1.5
The ptp priority1.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

zxr10PTPConfigPriority2 1.3.6.1.4.1.3902.3.101.10.1.6
The ptp priority2.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

zxr10PTPConfigTimeSource 1.3.6.1.4.1.3902.3.101.10.1.7
The ptp time source.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER null(255)  

zxr10PTPConfigClockClass 1.3.6.1.4.1.3902.3.101.10.1.8
The ptp clock class.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

zxr10PTPConfigClockAccuracy 1.3.6.1.4.1.3902.3.101.10.1.9
The ptp clock accuracy.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

zxr10PTPConfigInit 1.3.6.1.4.1.3902.3.101.10.1.10
Initialize all ptp information.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER ready(0), processing(1), init(2)  

zxr10PTPConfigGlobalEnable 1.3.6.1.4.1.3902.3.101.10.1.11
PTP global enable is true or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

zxr10PTPNetProtocol 1.3.6.1.4.1.3902.3.101.10.1.12
The global net protocol, some projects may not support.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2), ieee802(3)  

zxr10PTPConfigTransmitMode 1.3.6.1.4.1.3902.3.101.10.1.13
The transmit mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER multicast(2), unicast(1)  

zxr10PTPConfigClockClassRule 1.3.6.1.4.1.3902.3.101.10.1.14
The clock class rule.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ptpv2(1), force(2)  

zxr10PTPConfigVlanPriority 1.3.6.1.4.1.3902.3.101.10.1.15
Vlan priority.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7  

zxr10PTPConfigSourceName 1.3.6.1.4.1.3902.3.101.10.1.16
The PTP source interface name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

zxr10PTPConfigIpListProperty 1.3.6.1.4.1.3902.3.101.10.1.17
The ip list property,use for acl control.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

zxr10PTPConfigDDM 1.3.6.1.4.1.3902.3.101.10.2.1
The ptp domain delay mechanism.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER e2e(1), p2p(2)  

zxr10PTPConfigDomainNum 1.3.6.1.4.1.3902.3.101.10.2.2
The ptp domain number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

zxr10PTPConfigAnnounceInterval 1.3.6.1.4.1.3902.3.101.10.2.3
The ptp announce interval,the range is -1..4 for t8000\M6k and 89;-4..4 for upp3081 and 15k.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -4..4  

zxr10PTPConfigAnnounceTimeout 1.3.6.1.4.1.3902.3.101.10.2.4
The ptp announce timeout.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 2..10  

zxr10PTPConfigSyncInterval 1.3.6.1.4.1.3902.3.101.10.2.5
The ptp sync interval.for t8000\M6k the range is -7..1, for 89 is -6..1,for 15k is -7..1,upp3081 does not support.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -8..1  

zxr10PTPConfigDelayReqInterval 1.3.6.1.4.1.3902.3.101.10.2.6
The ptp delay req interval,for t8000\M6k and 15k the range is -7..1,for 89 the range is -5..5,upp3081 does not support.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -7..5  

zxr10PTPConfigPDelayReqInterval 1.3.6.1.4.1.3902.3.101.10.2.7
The ptp pdelay req interval, for t8000\M6k and 89 the range is 0..5, for 15k the range is -4..5,upp3081 does not support.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -4..5  

zxr10PTPShowOffset 1.3.6.1.4.1.3902.3.101.10.3.1
The ptp offset of the slave port, only valid for 89 and upp3081.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10PTPShowDelay 1.3.6.1.4.1.3902.3.101.10.3.2
The ptp delay of the slave port.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10PTPShowStepsFromGM 1.3.6.1.4.1.3902.3.101.10.3.3
The steps removed from grandmaster.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

zxr10PTPShowNativeClockId 1.3.6.1.4.1.3902.3.101.10.3.4
Native clock id.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10PTPShowParentPortId 1.3.6.1.4.1.3902.3.101.10.3.5
The parent port id.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10PTPShowGMClockId 1.3.6.1.4.1.3902.3.101.10.3.6
The grandmaster clock id.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10PTPShowSlavePort 1.3.6.1.4.1.3902.3.101.10.3.7
The interface name of the slave port.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10ptpIntfConfTable 1.3.6.1.4.1.3902.3.101.10.4
A table containing PTP port configure information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10ptpIntfConfEntry

zxr10ptpIntfConfEntry 1.3.6.1.4.1.3902.3.101.10.4.1
Information of PTP port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10ptpIntfConfEntry  

zxr10PTPPortIndex 1.3.6.1.4.1.3902.3.101.10.4.1.1
Object which specifies a unique entry in the Zxr10PtpIntfConfEntry.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

zxr10PTPPortConfigName 1.3.6.1.4.1.3902.3.101.10.4.1.2
The PTP port name.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..32)  

zxr10PTPPortConfigEnable 1.3.6.1.4.1.3902.3.101.10.4.1.4
Enable or disable a ptp port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

zxr10PTPPortConfigState 1.3.6.1.4.1.3902.3.101.10.4.1.5
The ptp port state configured by manual, masterslave state only t8000\M6k support.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER master(6), slave(9), passive(7), masterslave(10), invalid(254)  

zxr10PTPPortConfigSyncInterval 1.3.6.1.4.1.3902.3.101.10.4.1.6
The ptp sync interval,only upp3081 support.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -8..1  

zxr10PTPPortConfigDelayReqInterval 1.3.6.1.4.1.3902.3.101.10.4.1.7
The ptp delay req interval,only upp3081 support.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -5..5  

zxr10PTPPortConfigMultiDomainEnable 1.3.6.1.4.1.3902.3.101.10.4.1.8
The ptp port is multi domain port or not, only upp3081 support.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

zxr10PTPPortConfigDelayMech 1.3.6.1.4.1.3902.3.101.10.4.1.9
The delay mechanism of the ptp port,only upp3081 support.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER e2e(1), p2p(2)  

zxr10PTPPortNetProtocol 1.3.6.1.4.1.3902.3.101.10.4.1.10
The port net protocol,only upp3081 support.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2), ieee802(3)  

zxr10PTPPortPacketMechanism 1.3.6.1.4.1.3902.3.101.10.4.1.11
The port packet mechanism.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER null(255)  

zxr10PTPShowPortState 1.3.6.1.4.1.3902.3.101.10.4.1.12
The port state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER initializing(1), faulty(2), disable(3), listening(4), premaster(5), master(6), passive(7), uncalibrated(8), slave(9), masterslave(10), invalid(254)  

zxr10PTPPortConfigTransEnable 1.3.6.1.4.1.3902.3.101.10.4.1.13
Enable or disable the trans mode of a ptp port.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER null(255)  

zxr10PTPPortUnSymmetry 1.3.6.1.4.1.3902.3.101.10.4.1.14
The unsymmetrical offset(ns),consider the effect of the zxr10PTPPortUnSign node.t8000\M6k not support.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1000000000  

zxr10PTPPortUnSign 1.3.6.1.4.1.3902.3.101.10.4.1.15
The unsymmetrical offset sign,consider the effect of the zxr10PTPPortUnSymmetry node.t8000\M6k not support.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER positive(0), negative(1)  

zxr10PTPPortVlanId 1.3.6.1.4.1.3902.3.101.10.4.1.16
Vlan id, only valid for t8000\M6k, other projects maybe not support.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32 0..4094  

zxr10PTPPortSourceName 1.3.6.1.4.1.3902.3.101.10.4.1.17
The PTP source interface name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

zxr10PTPPortPDelayReqInterval 1.3.6.1.4.1.3902.3.101.10.4.1.18
The ptp pdelay req interval,only upp3081 support.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -4..4  

zxr10PTPPortNum 1.3.6.1.4.1.3902.3.101.10.4.1.19
The ptp port number,the value must be configured when create a port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..3000  

zxr10PTPPortConfigRowStatus 1.3.6.1.4.1.3902.3.101.10.4.1.100
Create or delete ptp port.
Status: obsolete Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10ptpPortCfgTable 1.3.6.1.4.1.3902.3.101.10.5
A table containing PTP port configure information.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10ptpPortCfgEntry

zxr10ptpPortCfgEntry 1.3.6.1.4.1.3902.3.101.10.5.1
Information of PTP port.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  Zxr10ptpPortCfgEntry  

zxr10ptpPortCfgIfName 1.3.6.1.4.1.3902.3.101.10.5.1.1
The PTP port name.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..31)  

zxr10ptpPortCfgPortType 1.3.6.1.4.1.3902.3.101.10.5.1.2
The PTP port type,1 means combined-oc, 2 means general port.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  INTEGER generalPort(2), combinedOcPort(1)  

zxr10ptpPortCfgPortNum 1.3.6.1.4.1.3902.3.101.10.5.1.3
The ptp port number,the value must be configured when create a port,1 means combined-oc.
Status: obsolete Access: read-create
OBJECT-TYPE    
  Integer32 1..3000  

zxr10ptpPortCfgEnable 1.3.6.1.4.1.3902.3.101.10.5.1.4
Enable or disable a ptp port.
Status: obsolete Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

zxr10ptpPortCfgState 1.3.6.1.4.1.3902.3.101.10.5.1.5
The ptp port state configured by manual, masterslave state only t8000 support.
Status: obsolete Access: read-create
OBJECT-TYPE    
  INTEGER master(6), slave(9), passive(7), masterslave(10)  

zxr10ptpPortCfgSyncInterval 1.3.6.1.4.1.3902.3.101.10.5.1.6
The ptp sync interval,for upp3081 the range is -8..1, for 15k,the range is -4..1.
Status: obsolete Access: read-create
OBJECT-TYPE    
  Integer32 -8..1  

zxr10ptpPortCfgDelayReqInterval 1.3.6.1.4.1.3902.3.101.10.5.1.7
The ptp delay req interval,for upp3081 the range is -5..5, for 15k,the range is -4..5.
Status: obsolete Access: read-create
OBJECT-TYPE    
  Integer32 -5..5  

zxr10ptpPortCfgMultiDomainEnable 1.3.6.1.4.1.3902.3.101.10.5.1.8
The ptp port is multi domain port or not, only upp3081 support.
Status: obsolete Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

zxr10ptpPortCfgDelayMech 1.3.6.1.4.1.3902.3.101.10.5.1.9
The delay mechanism of the ptp port,only upp3081 support.
Status: obsolete Access: read-create
OBJECT-TYPE    
  INTEGER e2e(1), p2p(2)  

zxr10ptpPortCfgNetProtocol 1.3.6.1.4.1.3902.3.101.10.5.1.10
The port net protocol,only upp3081 and 15k support.
Status: obsolete Access: read-create
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2), ieee802(3)  

zxr10ptpPortCfgTransmitMode 1.3.6.1.4.1.3902.3.101.10.5.1.11
The port packet transmit mode,only 15k support.
Status: obsolete Access: read-create
OBJECT-TYPE    
  INTEGER multicast(2), unicast(1)  

zxr10ptpPortCfgUnSymmetry 1.3.6.1.4.1.3902.3.101.10.5.1.12
The unsymmetrical offset(ns),consider the effect of the zxr10PTPPortUnSign node.t8000 not support.
Status: obsolete Access: read-create
OBJECT-TYPE    
  Unsigned32 0..1000000000  

zxr10ptpPortCfgUnSign 1.3.6.1.4.1.3902.3.101.10.5.1.13
The unsymmetrical offset sign,consider the effect of the zxr10PTPPortUnSymmetry node.t8000 not support.
Status: obsolete Access: read-create
OBJECT-TYPE    
  INTEGER negative(1), positive(2)  

zxr10ptpPortCfgVlanId 1.3.6.1.4.1.3902.3.101.10.5.1.14
Vlan id, only valid for 15k,other projects maybe not support
Status: obsolete Access: read-create
OBJECT-TYPE    
  Integer32 0..4094  

zxr10ptpPortCfgSourceName 1.3.6.1.4.1.3902.3.101.10.5.1.15
The PTP source interface name.
Status: obsolete Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

zxr10ptpPortCfgPDelayReqInterval 1.3.6.1.4.1.3902.3.101.10.5.1.16
The ptp pdelay req interval,only upp3081 and 15k support.
Status: obsolete Access: read-create
OBJECT-TYPE    
  Integer32 -4..4  

zxr10ptpPortCfgPktStatistic 1.3.6.1.4.1.3902.3.101.10.5.1.17
packet statistic switch.
Status: obsolete Access: read-create
OBJECT-TYPE    
  INTEGER disable(2), enable(1)  

zxr10ptpPortCfgWorkMode 1.3.6.1.4.1.3902.3.101.10.5.1.18
The ptp port work mode.
Status: obsolete Access: read-create
OBJECT-TYPE    
  INTEGER freeMode(2), fixedMode(1)  

zxr10ptpPortCfgVlanPriority 1.3.6.1.4.1.3902.3.101.10.5.1.19
Vlan priority
Status: obsolete Access: read-create
OBJECT-TYPE    
  INTEGER 0..7  

zxr10ptpPortCfgUniNegoDura 1.3.6.1.4.1.3902.3.101.10.5.1.20
Unicast negotiation duration of the port.
Status: obsolete Access: read-create
OBJECT-TYPE    
  INTEGER 60..1000  

zxr10ptpPortCfgRowStatus 1.3.6.1.4.1.3902.3.101.10.5.1.100
Create or delete ptp port,must config port number.
Status: obsolete Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10ptpEthPortTable 1.3.6.1.4.1.3902.3.101.10.6
A table containing PTP port configure information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10ptpEthPortEntry

zxr10ptpEthPortEntry 1.3.6.1.4.1.3902.3.101.10.6.1
Information about the PTP ethernet port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10ptpEthPortEntry  

zxr10PTPEthPortName 1.3.6.1.4.1.3902.3.101.10.6.1.1
The PTP ethernet port name.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10PTPEthPortConfigEnable 1.3.6.1.4.1.3902.3.101.10.6.1.2
Enable or disable a ptp ethernet port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(3), enable(1), discard(2)  

zxr10PTPEthPortUnSymmetry 1.3.6.1.4.1.3902.3.101.10.6.1.3
The unsymmetrical offset.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

zxr10PTPEthPortUnSign 1.3.6.1.4.1.3902.3.101.10.6.1.4
The unsymmetrical offset sign.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER positive(2), negative(1)  

zxr10PTPEthPortRowStatus 1.3.6.1.4.1.3902.3.101.10.6.1.100
Create or delete a ptp ethernet port.
Status: obsolete Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10ptpDstIpConfTable 1.3.6.1.4.1.3902.3.101.10.7
A table containing PTP port dest ip configure information.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10ptpDstIpConfEntry

zxr10ptpDstIpConfEntry 1.3.6.1.4.1.3902.3.101.10.7.1
Information about the PTP interface destination IP.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  Zxr10ptpDstIpConfEntry  

zxr10PTPDestIpPortName 1.3.6.1.4.1.3902.3.101.10.7.1.1
The PTP port name.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..31)  

zxr10PTPDestIpPortType 1.3.6.1.4.1.3902.3.101.10.7.1.2
The PTP port type,1 means combined-oc,2 means oc,bc,tc.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  INTEGER generalPort(2), combinedOcPort(1)  

zxr10PTPDestIpIndex 1.3.6.1.4.1.3902.3.101.10.7.1.3
The port destination IP address.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  IpAddress  

zxr10PTPDestIpPortNum 1.3.6.1.4.1.3902.3.101.10.7.1.4
The PTP port number,1 means combined-oc.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 1..3000  

zxr10PTPDestIpAlternatePriority1 1.3.6.1.4.1.3902.3.101.10.7.1.5
Set priority1 of accept master IP.
Status: obsolete Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

zxr10PTPDestIpPortMode 1.3.6.1.4.1.3902.3.101.10.7.1.6
Set the port mode of PTP.
Status: obsolete Access: read-create
OBJECT-TYPE    
  INTEGER fixedmode(1), freemode(2)  

zxr10PTPDestIpRowStatus 1.3.6.1.4.1.3902.3.101.10.7.1.100
Create or delete ptp accept master IP.
Status: obsolete Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10ptpIpListConfTable 1.3.6.1.4.1.3902.3.101.10.8
A table containing PTP ACL IP information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10ptpIpListConfEntry

zxr10ptpIpListConfEntry 1.3.6.1.4.1.3902.3.101.10.8.1
Information about PTP ACL IP configure.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10ptpIpListConfEntry  

zxr10PTPIpListConfig 1.3.6.1.4.1.3902.3.101.10.8.1.1
The Acl IP address.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

zxr10PTPIpListRowStatus 1.3.6.1.4.1.3902.3.101.10.8.1.100
Create or delete acl IP.
Status: obsolete Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10ptpTimeSrcCfgTable 1.3.6.1.4.1.3902.3.101.10.9
A table containing PTP time source information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10ptpTimeSrcCfgEntry

zxr10ptpTimeSrcCfgEntry 1.3.6.1.4.1.3902.3.101.10.9.1
Information about PTP time source configure of PTP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10ptpTimeSrcCfgEntry  

zxr10PTPTimeSrcCfgIfname 1.3.6.1.4.1.3902.3.101.10.9.1.1
The time source ifname, eg: gps or bits.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10PTPTimeSrcCfgPri1 1.3.6.1.4.1.3902.3.101.10.9.1.2
The time source priority1.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

zxr10PTPTimeSrcCfgPri2 1.3.6.1.4.1.3902.3.101.10.9.1.3
The time source priority2.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

zxr10PTPTimeSrcCfgRowStatus 1.3.6.1.4.1.3902.3.101.10.9.1.100
Create or delete time source.
Status: obsolete Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10PTPInitConfig 1.3.6.1.4.1.3902.3.101.10.10.1
Initial all attribution.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ready(1), initial(2)  

zxr10ptpPortShowTable 1.3.6.1.4.1.3902.3.101.10.11
A table containing PTP port state information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10ptpPortShowEntry

zxr10ptpPortShowEntry 1.3.6.1.4.1.3902.3.101.10.11.1
Information of PTP port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10ptpPortShowEntry  

zxr10ptpPortShowIfName 1.3.6.1.4.1.3902.3.101.10.11.1.1
The PTP port name.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..31)  

zxr10ptpPortShowPortType 1.3.6.1.4.1.3902.3.101.10.11.1.2
The PTP port type,1 means combined-oc,0 means not.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER combinedOcPort(1), generalPort(2)  

zxr10ptpPortShowPortNum 1.3.6.1.4.1.3902.3.101.10.11.1.3
The ptp port number,the value must be configured when create a port,1 means combined-oc.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..3000  

zxr10ptpPortShowPortState 1.3.6.1.4.1.3902.3.101.10.11.1.4
The port state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER initializing(1), faulty(2), disable(3), listening(4), premaster(5), master(6), passive(7), uncalibrated(8), slave(9), masterslave(10), invalid(254)  

zxr10ptpPortTable 1.3.6.1.4.1.3902.3.101.10.12
A table containing PTP port configure information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10ptpPortEntry

zxr10ptpPortEntry 1.3.6.1.4.1.3902.3.101.10.12.1
Information of PTP port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10ptpPortEntry  

zxr10ptpPortIfName 1.3.6.1.4.1.3902.3.101.10.12.1.1
The PTP port name.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..31)  

zxr10ptpPortType 1.3.6.1.4.1.3902.3.101.10.12.1.2
The PTP port type,1 means combined-oc, 2 means general port.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER combinedOcPort(1), generalPort(2)  

zxr10ptpPortIndexVlanid 1.3.6.1.4.1.3902.3.101.10.12.1.3
The ptp port vlan ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..4094  

zxr10ptpPortNum 1.3.6.1.4.1.3902.3.101.10.12.1.4
The ptp port number,the value must be configured when create a port,1 means combined-oc.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..3000  

zxr10ptpPortEnable 1.3.6.1.4.1.3902.3.101.10.12.1.5
Enable or disable a ptp port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

zxr10ptpPortState 1.3.6.1.4.1.3902.3.101.10.12.1.6
The ptp port state configured by manual, masterslave state only t8000\M6k support.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER master(6), slave(9), passive(7), masterslave(10), invalid(254)  

zxr10ptpPortSyncInterval 1.3.6.1.4.1.3902.3.101.10.12.1.7
The ptp sync interval,for upp3081 the range is -8..1, for 15k,the range is -4..1.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -8..1  

zxr10ptpPortDelayReqInterval 1.3.6.1.4.1.3902.3.101.10.12.1.8
The ptp delay req interval,for upp3081 the range is -5..5, for 15k,the range is -4..5.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -5..5  

zxr10ptpPortMultiDomainEnable 1.3.6.1.4.1.3902.3.101.10.12.1.9
The ptp port is multi domain port or not, only upp3081 support.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

zxr10ptpPortDelayMech 1.3.6.1.4.1.3902.3.101.10.12.1.10
The delay mechanism of the ptp port,only upp3081 support.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER e2e(1), p2p(2)  

zxr10ptpPortNetProtocol 1.3.6.1.4.1.3902.3.101.10.12.1.11
The port net protocol,only upp3081 and 15k support.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2), ieee802(3)  

zxr10ptpPortTransmitMode 1.3.6.1.4.1.3902.3.101.10.12.1.12
The port packet transmit mode,only 15k support.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER multicast(2), unicast(1)  

zxr10ptpPortUnSymmetry 1.3.6.1.4.1.3902.3.101.10.12.1.13
The unsymmetrical offset(ns),consider the effect of the zxr10PTPPortUnSign node.t8000\M6k not support.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1000000000  

zxr10ptpPortUnSign 1.3.6.1.4.1.3902.3.101.10.12.1.14
The unsymmetrical offset sign,consider the effect of the zxr10PTPPortUnSymmetry node.t8000\M6k not support.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER negative(1), positive(2)  

zxr10ptpPortVlanId 1.3.6.1.4.1.3902.3.101.10.12.1.15
Vlan id, only valid for 15k,other projects maybe not support
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..4094  

zxr10ptpPortSourceName 1.3.6.1.4.1.3902.3.101.10.12.1.16
The PTP source interface name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

zxr10ptpPortPDelayReqInterval 1.3.6.1.4.1.3902.3.101.10.12.1.17
The ptp pdelay req interval,only upp3081 and 15k support.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -4..4  

zxr10ptpPortPktStatistic 1.3.6.1.4.1.3902.3.101.10.12.1.18
packet statistic switch.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(2), enable(1)  

zxr10ptpPortWorkMode 1.3.6.1.4.1.3902.3.101.10.12.1.19
The ptp port work mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER freeMode(2), fixedMode(1)  

zxr10ptpPortVlanPriority 1.3.6.1.4.1.3902.3.101.10.12.1.20
Vlan priority
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

zxr10ptpPortUniNegoDura 1.3.6.1.4.1.3902.3.101.10.12.1.21
Unicast negotiation duration of the port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 60..1000  

zxr10ptpAcceptDstIpTable 1.3.6.1.4.1.3902.3.101.10.13
A table containing PTP port dest ip configure information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10ptpAcceptDstIpEntry

zxr10ptpAcceptDstIpEntry 1.3.6.1.4.1.3902.3.101.10.13.1
Information about the PTP interface destination IP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10ptpAcceptDstIpEntry  

zxr10PTPAcceptDestIpPortName 1.3.6.1.4.1.3902.3.101.10.13.1.1
The PTP port name.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..31)  

zxr10PTPAcceptDestIpPortType 1.3.6.1.4.1.3902.3.101.10.13.1.2
The PTP port type,1 means combined-oc,2 means oc,bc,tc.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER combinedOcPort(1), generalPort(2)  

zxr10PTPAcceptDestIpIndex 1.3.6.1.4.1.3902.3.101.10.13.1.3
The port destination IP address.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

zxr10ptpAcceptDestIpVlanid 1.3.6.1.4.1.3902.3.101.10.13.1.4
The ptp port vlan ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..4094  

zxr10PTPAcceptDestIpPortNum 1.3.6.1.4.1.3902.3.101.10.13.1.5
The PTP port number,1 means combined-oc.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..3000  

zxr10PTPAcceptDestIpPriority1 1.3.6.1.4.1.3902.3.101.10.13.1.6
Set priority1 of accept master IP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

zxr10PTPAcceptDestIpPortMode 1.3.6.1.4.1.3902.3.101.10.13.1.7
Set the port mode of PTP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fixedmode(1), freemode(2)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor