ZYXEL-AclV2-MIB

Imported modules

SNMPv2-SMI	SNMPv2-TC	P-BRIDGE-MIB
Q-BRIDGE-MIB	INET-ADDRESS-MIB	ZYXEL-ES-SMI

Imported symbols

OBJECT-TYPE	Counter64	MODULE-IDENTITY
RowStatus	MacAddress	DisplayString
EnabledStatus	PortList	InetAddress
IpAddress	esMgmt

Defined Types

ZyxelAclV2ClassifierEntry
SEQUENCE
	zyAclV2ClassifierName	DisplayString
	zyAclV2ClassifierState	EnabledStatus
	zyAclV2ClassifierWeight	INTEGER
	zyAclV2ClassifierCountState	EnabledStatus
	zyAclV2ClassifierLogState	EnabledStatus
	zyAclV2ClassifierTimeRange	DisplayString
	zyAclV2ClassifierMatchCount	Counter64

ZyxelAclV2ClassifierEthernetEntry
SEQUENCE
	zyAclV2ClassifierEthernetSourcePorts	PortList
	zyAclV2ClassifierEthernetSourceTrunks	PortList
	zyAclV2ClassifierEthernetPacketFormat	INTEGER
	zyAclV2ClassifierEthernet8021pPriority	INTEGER
	zyAclV2ClassifierEthernetInner8021pPriority	INTEGER
	zyAclV2ClassifierEthernetType	INTEGER
	zyAclV2ClassifierEthernetSourceMacAddress	MacAddress
	zyAclV2ClassifierEthernetSourceMACMask	MacAddress
	zyAclV2ClassifierEthernetDestinationMacAddress	MacAddress
	zyAclV2ClassifierEthernetDestinationMACMask	MacAddress

ZyxelAclV2ClassifierVlanEntry
SEQUENCE
	zyAclV2ClassifierVlanMap1k	OCTET STRING
	zyAclV2ClassifierVlanMap2k	OCTET STRING
	zyAclV2ClassifierVlanMap3k	OCTET STRING
	zyAclV2ClassifierVlanMap4k	OCTET STRING

ZyxelAclV2ClassifierInnerVlanEntry
SEQUENCE
	zyAclV2ClassifierInnerVlanMap1k	OCTET STRING
	zyAclV2ClassifierInnerVlanMap2k	OCTET STRING
	zyAclV2ClassifierInnerVlanMap3k	OCTET STRING
	zyAclV2ClassifierInnerVlanMap4k	OCTET STRING

ZyxelAclV2ClassifierIpEntry
SEQUENCE
	zyAclV2ClassifierIpPacketLenRangeStart	INTEGER
	zyAclV2ClassifierIpPacketLenRangeEnd	INTEGER
	zyAclV2ClassifierIpDSCP	INTEGER
	zyAclV2ClassifierIpPrecedence	INTEGER
	zyAclV2ClassifierIpToS	INTEGER
	zyAclV2ClassifierIpProtocol	INTEGER
	zyAclV2ClassifierIpEstablishOnly	EnabledStatus
	zyAclV2ClassifierIpSourceIpAddress	IpAddress
	zyAclV2ClassifierIpSourceIpMaskBits	INTEGER
	zyAclV2ClassifierIpDestinationIpAddress	IpAddress
	zyAclV2ClassifierIpDestinationIpMaskBits	INTEGER
	zyAclV2ClassifierIpSourceSocketRangeStart	INTEGER
	zyAclV2ClassifierIpSourceSocketRangeEnd	INTEGER
	zyAclV2ClassifierIpDestinationSocketRangeStart	INTEGER
	zyAclV2ClassifierIpDestinationSocketRangeEnd	INTEGER

ZyxelAclV2ClassifierIpv6Entry
SEQUENCE
	zyAclV2ClassifierIPv6DSCP	INTEGER
	zyAclV2ClassifierIPv6NextHeader	INTEGER
	zyAclV2ClassifierIPv6EstablishOnly	EnabledStatus
	zyAclV2ClassifierIPv6SourceIpAddress	InetAddress
	zyAclV2ClassifierIPv6SourceIpPrefixLength	INTEGER
	zyAclV2ClassifierIPv6DestinationIpAddress	InetAddress
	zyAclV2ClassifierIPv6DestinationIpPrefixLength	INTEGER

ZyxelAclV2PolicyEntry
SEQUENCE
	zyAclV2PolicyName	DisplayString
	zyAclV2PolicyState	EnabledStatus
	zyAclV2PolicyClassifier	DisplayString
	zyAclV2PolicyVid	INTEGER
	zyAclV2PolicyEgressPort	INTEGER
	zyAclV2Policy8021pPriority	INTEGER
	zyAclV2PolicyDSCP	INTEGER
	zyAclV2PolicyTOS	INTEGER
	zyAclV2PolicyBandwidth	INTEGER
	zyAclV2PolicyOutOfProfileDSCP	INTEGER
	zyAclV2PolicyForwardingAction	INTEGER
	zyAclV2PolicyPriorityAction	INTEGER
	zyAclV2PolicyDiffServAction	INTEGER
	zyAclV2PolicyOutgoingAction	BITS
	zyAclV2PolicyMeteringState	INTEGER
	zyAclV2PolicyOutOfProfileAction	BITS
	zyAclV2PolicyRowstatus	RowStatus
	zyAclV2PolicyQueueAction	INTEGER

Defined Values

zyxelAclV2		1.3.6.1.4.1.890.1.15.3.105
The subtree for access control list (ACL) version 2
MODULE-IDENTITY

zyxelAclV2ClassifierStatus		1.3.6.1.4.1.890.1.15.3.105.1
OBJECT IDENTIFIER

zyxelAclV2PolicyStatus		1.3.6.1.4.1.890.1.15.3.105.2
OBJECT IDENTIFIER

zyxelAclV2TrapInfoObjects		1.3.6.1.4.1.890.1.15.3.105.3
OBJECT IDENTIFIER

zyxelAclV2Notifications		1.3.6.1.4.1.890.1.15.3.105.4
OBJECT IDENTIFIER

zyxelAclV2ClassifierTable		1.3.6.1.4.1.890.1.15.3.105.1.1
The table contains classifier general configuration and information.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZyxelAclV2ClassifierEntry

zyxelAclV2ClassifierEntry		1.3.6.1.4.1.890.1.15.3.105.1.1.1
An entry contains classifier general configuration and information.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZyxelAclV2ClassifierEntry

zyAclV2ClassifierName		1.3.6.1.4.1.890.1.15.3.105.1.1.1.1
The name of classifier rule is used for identifying purposes.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString

zyAclV2ClassifierState		1.3.6.1.4.1.890.1.15.3.105.1.1.1.2
Enable/Disable classifier rule on this switch.
Status: current	Access: read-only
OBJECT-TYPE
	EnabledStatus

zyAclV2ClassifierWeight		1.3.6.1.4.1.890.1.15.3.105.1.1.1.3
Weght value for classifier rule, 0~65535. Default 32767. When the match order is manual, the higher weight the higher priorit When the match order is auto, the priority depends on the depth of qualifier.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyAclV2ClassifierCountState		1.3.6.1.4.1.890.1.15.3.105.1.1.1.4
Enable/disable count on this classifier rule. To Enable counting the matched packet number of this rule.
Status: current	Access: read-only
OBJECT-TYPE
	EnabledStatus

zyAclV2ClassifierLogState		1.3.6.1.4.1.890.1.15.3.105.1.1.1.5
Enable/disable log on this classifier rule. To Enable recording the matched packet number of this rule in a configurable time interval.
Status: current	Access: read-only
OBJECT-TYPE
	EnabledStatus

zyAclV2ClassifierTimeRange		1.3.6.1.4.1.890.1.15.3.105.1.1.1.6
Time Range Name for classifier rule. Bind a time range profile with this rule to active this rule in specific time.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

zyAclV2ClassifierMatchCount		1.3.6.1.4.1.890.1.15.3.105.1.1.1.7
Match-Count of this classifier rule. It will show the matched packet count of this rule if zyAclV2ClassifierCount is enabled.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

zyxelAclV2ClassifierEthernetTable		1.3.6.1.4.1.890.1.15.3.105.1.2
The table contains classifier ethernet configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZyxelAclV2ClassifierEthernetEntry

zyxelAclV2ClassifierEthernetEntry		1.3.6.1.4.1.890.1.15.3.105.1.2.1
An entry contains classifier ethernet configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZyxelAclV2ClassifierEthernetEntry

zyAclV2ClassifierEthernetSourcePorts		1.3.6.1.4.1.890.1.15.3.105.1.2.1.1
Source Port List for classifier rule.
Status: current	Access: read-only
OBJECT-TYPE
	PortList

zyAclV2ClassifierEthernetSourceTrunks		1.3.6.1.4.1.890.1.15.3.105.1.2.1.2
Source Trunk List for classifier rule.
Status: current	Access: read-only
OBJECT-TYPE
	PortList

zyAclV2ClassifierEthernetPacketFormat		1.3.6.1.4.1.890.1.15.3.105.1.2.1.3
Packet format for classifier rule. A value of 802.3 indicates that the packets are formatted according to the IEEE 802.3 standards. A value of Ethernet II indicates that the packets are formatted according to RFC 894, Ethernet II encapsulation.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	all(1), ethernetIIUntagged(2), ethernetIITagged(3), ethernet802dot3Untagged(4), ethernet802dot3Tagged(5)

zyAclV2ClassifierEthernet8021pPriority		1.3.6.1.4.1.890.1.15.3.105.1.2.1.4
802.1p priority for classifier rule. 0~7. The range is 0~7 and value -1 means any priority level.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyAclV2ClassifierEthernetInner8021pPriority		1.3.6.1.4.1.890.1.15.3.105.1.2.1.5
Inner 802.1p priority for classifier rule, 0~7. Value -1 means any priority level.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyAclV2ClassifierEthernetType		1.3.6.1.4.1.890.1.15.3.105.1.2.1.6
Ethernet type for classifier rule. It is represented in decimal expression and value 65535 means any Ethernet type.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyAclV2ClassifierEthernetSourceMacAddress		1.3.6.1.4.1.890.1.15.3.105.1.2.1.7
Source MAC address for classifier rule. 00:00:00:00:00:00 means any source MAC address.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

zyAclV2ClassifierEthernetSourceMACMask		1.3.6.1.4.1.890.1.15.3.105.1.2.1.8
Source MAC Mask for classifier rule.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

zyAclV2ClassifierEthernetDestinationMacAddress		1.3.6.1.4.1.890.1.15.3.105.1.2.1.9
Destination MAC address for classifier rule. 00:00:00:00:00:00 means any destination MAC address.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

zyAclV2ClassifierEthernetDestinationMACMask		1.3.6.1.4.1.890.1.15.3.105.1.2.1.10
Destination MAC Mask for classifier rule.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

zyxelAclV2ClassifierVlanTable		1.3.6.1.4.1.890.1.15.3.105.1.3
An entry contains classifier VLAN configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZyxelAclV2ClassifierVlanEntry

zyxelAclV2ClassifierVlanEntry		1.3.6.1.4.1.890.1.15.3.105.1.3.1
An entry contains classifier VLAN configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZyxelAclV2ClassifierVlanEntry

zyAclV2ClassifierVlanMap1k		1.3.6.1.4.1.890.1.15.3.105.1.3.1.1
VLAN ID List for classifer rule. range : 1~4094.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

zyAclV2ClassifierVlanMap2k		1.3.6.1.4.1.890.1.15.3.105.1.3.1.2
VLAN ID List for classifer rule. range : 1~4094.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

zyAclV2ClassifierVlanMap3k		1.3.6.1.4.1.890.1.15.3.105.1.3.1.3
VLAN ID List for classifer rule. range : 1~4094.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

zyAclV2ClassifierVlanMap4k		1.3.6.1.4.1.890.1.15.3.105.1.3.1.4
VLAN ID List for classifer rule. range : 1~4094.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

zyxelAclV2ClassifierInnerVlanTable		1.3.6.1.4.1.890.1.15.3.105.1.4
An entry contains classifier inner VLAN configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZyxelAclV2ClassifierInnerVlanEntry

zyxelAclV2ClassifierInnerVlanEntry		1.3.6.1.4.1.890.1.15.3.105.1.4.1
An entry contains classifier inner VLAN configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZyxelAclV2ClassifierInnerVlanEntry

zyAclV2ClassifierInnerVlanMap1k		1.3.6.1.4.1.890.1.15.3.105.1.4.1.1
inner VLAN ID List for classifer rule. range : 1~4094.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

zyAclV2ClassifierInnerVlanMap2k		1.3.6.1.4.1.890.1.15.3.105.1.4.1.2
inner VLAN ID List for classifer rule. range : 1~4094.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

zyAclV2ClassifierInnerVlanMap3k		1.3.6.1.4.1.890.1.15.3.105.1.4.1.3
inner VLAN ID List for classifer rule. range : 1~4094.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

zyAclV2ClassifierInnerVlanMap4k		1.3.6.1.4.1.890.1.15.3.105.1.4.1.4
inner VLAN ID List for classifer rule. range : 1~4094.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

zyxelAclV2ClassifierIpTable		1.3.6.1.4.1.890.1.15.3.105.1.5
The table contains classifier IP configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZyxelAclV2ClassifierIpEntry

zyxelAclV2ClassifierIpEntry		1.3.6.1.4.1.890.1.15.3.105.1.5.1
An entry contains classifier IP configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZyxelAclV2ClassifierIpEntry

zyAclV2ClassifierIpPacketLenRangeStart		1.3.6.1.4.1.890.1.15.3.105.1.5.1.1
The Start value of IP packet length range, 0~65535. And it must smaller then the zyAclV2ClassifierIpPacketLenRangeEnd. Value -1 means any start value.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyAclV2ClassifierIpPacketLenRangeEnd		1.3.6.1.4.1.890.1.15.3.105.1.5.1.2
The End value of IP packet length range, 0~65535. And it must larger then the zyAclV2ClassifierIpPacketLenRangeStart. Value -1 means any start value.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyAclV2ClassifierIpDSCP		1.3.6.1.4.1.890.1.15.3.105.1.5.1.3
DSCP (DiffServ Code Point) for classifier rule. The range is 0~63 and value -1 means any DSCP.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyAclV2ClassifierIpPrecedence		1.3.6.1.4.1.890.1.15.3.105.1.5.1.4
Precedence for calssifier rule, 0~7. Value -1 means any Precedence.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyAclV2ClassifierIpToS		1.3.6.1.4.1.890.1.15.3.105.1.5.1.5
ToS for calssifier rule, 0~127. Value -1 means any ToS.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyAclV2ClassifierIpProtocol		1.3.6.1.4.1.890.1.15.3.105.1.5.1.6
IP Protocol for classifier rule. Value 255 means any IP protocol.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyAclV2ClassifierIpEstablishOnly		1.3.6.1.4.1.890.1.15.3.105.1.5.1.7
Establish Only for TCP protocol type in classifier rule. This means that the switch will pick out the packets that are sent to establish TCP connections.
Status: current	Access: read-only
OBJECT-TYPE
	EnabledStatus

zyAclV2ClassifierIpSourceIpAddress		1.3.6.1.4.1.890.1.15.3.105.1.5.1.8
Source IP address for classifier rule. 0.0.0.0 means any source IP address.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

zyAclV2ClassifierIpSourceIpMaskBits		1.3.6.1.4.1.890.1.15.3.105.1.5.1.9
Source IP mask bits for classifier rule.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyAclV2ClassifierIpDestinationIpAddress		1.3.6.1.4.1.890.1.15.3.105.1.5.1.10
Destination IP address for classifier rule. 0.0.0.0 means any destination IP address.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

zyAclV2ClassifierIpDestinationIpMaskBits		1.3.6.1.4.1.890.1.15.3.105.1.5.1.11
Destination IP mask bits for classifier rule.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyAclV2ClassifierIpSourceSocketRangeStart		1.3.6.1.4.1.890.1.15.3.105.1.5.1.12
Source Socket Number range start for classifier rule, 0~65535. If not qualifying a range of socket numbers, the zyAclV2ClassifierSourceSocketRangeEnd is no need to configure.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyAclV2ClassifierIpSourceSocketRangeEnd		1.3.6.1.4.1.890.1.15.3.105.1.5.1.13
Destination Socket Number range end for classifier rule. This object is not necessary.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyAclV2ClassifierIpDestinationSocketRangeStart		1.3.6.1.4.1.890.1.15.3.105.1.5.1.14
Source Socket Number range start for classifier rule, 0~65535. If not qualifying a range of socket numbers, the zyAclV2ClassifierDestinationSocketRangeEnd is no need to configure.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyAclV2ClassifierIpDestinationSocketRangeEnd		1.3.6.1.4.1.890.1.15.3.105.1.5.1.15
Destination Socket Number range end for classifier rule. This object is not necessary.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyxelAclV2ClassifierIpv6Table		1.3.6.1.4.1.890.1.15.3.105.1.6
The table contains classifier IPv6 configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZyxelAclV2ClassifierIpv6Entry

zyxelAclV2ClassifierIpv6Entry		1.3.6.1.4.1.890.1.15.3.105.1.6.1
An entry contains classifier IPv6 configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZyxelAclV2ClassifierIpv6Entry

zyAclV2ClassifierIPv6DSCP		1.3.6.1.4.1.890.1.15.3.105.1.6.1.1
DSCP (DiffServ Code Point) for classifier rule. The range is 0~63 and value -1 means any DSCP.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyAclV2ClassifierIPv6NextHeader		1.3.6.1.4.1.890.1.15.3.105.1.6.1.2
IPv6 next header protocol type for classifier rule. Value 255 means any protocol type.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyAclV2ClassifierIPv6EstablishOnly		1.3.6.1.4.1.890.1.15.3.105.1.6.1.3
Establish Only for TCP protocol type in classifier rule. This means that the switch will pick out the packets that are sent to establish TCP connections.
Status: current	Access: read-only
OBJECT-TYPE
	EnabledStatus

zyAclV2ClassifierIPv6SourceIpAddress		1.3.6.1.4.1.890.1.15.3.105.1.6.1.4
IPv6 source address for classifier rule. :: means any IPv6 source ip address.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

zyAclV2ClassifierIPv6SourceIpPrefixLength		1.3.6.1.4.1.890.1.15.3.105.1.6.1.5
IPv6 source address prefix length for classifier rule.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyAclV2ClassifierIPv6DestinationIpAddress		1.3.6.1.4.1.890.1.15.3.105.1.6.1.6
IPv6 destination address for classifier rule. :: means any IPv6 destination ip address.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

zyAclV2ClassifierIPv6DestinationIpPrefixLength		1.3.6.1.4.1.890.1.15.3.105.1.6.1.7
IPv6 destination address prefix length for classifier rule.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyxelAclV2ClassifierMatchOrder		1.3.6.1.4.1.890.1.15.3.105.1.7
Manual or Auto to determine the rule ordering. When the match order is manual, the higher weight the higher priority. When the match order is auto, the priority is depended on the depth of the qualifier.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	auto(1), manual(2)

zyxelAclV2ClassifierLoggingState		1.3.6.1.4.1.890.1.15.3.105.1.8
Enable/disable Logging for classifier.
Status: current	Access: read-only
OBJECT-TYPE
	EnabledStatus

zyxelAclV2ClassifierLoggingInterval		1.3.6.1.4.1.890.1.15.3.105.1.9
Logging Interval for classifier, 0~65535.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyxelAclV2PolicyTable		1.3.6.1.4.1.890.1.15.3.105.2.1
The table contains policy configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZyxelAclV2PolicyEntry

zyxelAclV2PolicyEntry		1.3.6.1.4.1.890.1.15.3.105.2.1.1
An entry contains policy configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZyxelAclV2PolicyEntry

zyAclV2PolicyName		1.3.6.1.4.1.890.1.15.3.105.2.1.1.1
The name of policy rule is used for identifying purposes.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString

zyAclV2PolicyState		1.3.6.1.4.1.890.1.15.3.105.2.1.1.2
Enable/Disable policy rule on this switch.
Status: current	Access: read-only
OBJECT-TYPE
	EnabledStatus

zyAclV2PolicyClassifier		1.3.6.1.4.1.890.1.15.3.105.2.1.1.3
The classifier(s) applies in this policy rule.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

zyAclV2PolicyVid		1.3.6.1.4.1.890.1.15.3.105.2.1.1.4
VLAN ID for policy rule.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyAclV2PolicyEgressPort		1.3.6.1.4.1.890.1.15.3.105.2.1.1.5
The outgoing port number in this policy rule.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyAclV2Policy8021pPriority		1.3.6.1.4.1.890.1.15.3.105.2.1.1.6
Specify a 802.1p priority level for policy rule. The value of 802.1p is between 0 and 7.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyAclV2PolicyDSCP		1.3.6.1.4.1.890.1.15.3.105.2.1.1.7
Specify a DSCP (DiffServ Code Point) for policy rule. DSCP number is between 0 and 63.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyAclV2PolicyTOS		1.3.6.1.4.1.890.1.15.3.105.2.1.1.8
Specify the type of service (TOS) priority level for policy rule. The value of TOS is between 0 and 7.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyAclV2PolicyBandwidth		1.3.6.1.4.1.890.1.15.3.105.2.1.1.9
Specify the bandwidth for policy rule in kilobit per second (Kbps).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyAclV2PolicyOutOfProfileDSCP		1.3.6.1.4.1.890.1.15.3.105.2.1.1.10
Specify a new DSCP number (between 0 and 63) for policy rule if you want to replace or remark the DSCP number for out-of-profile traffic.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyAclV2PolicyForwardingAction		1.3.6.1.4.1.890.1.15.3.105.2.1.1.11
There are three forwarding actions for policy rule. 'No change' is forward the packets. 'Discard the packet' is drop the packets. 'Do not drop the matching frame previously marked for dropping' is retain the frames that were marked to be dropped before.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noChange(1), discardThePacket(2), doNotDropTheMatchingFramePreviouslyMarkedForDropping(3)

zyAclV2PolicyPriorityAction		1.3.6.1.4.1.890.1.15.3.105.2.1.1.12
There are four priority actions for policy rule. 'No change' is keep the priority setting of the frames. 'Set the packet's 802.1 priority' is replace the packet's 802.1 priority field with the value you set in the Priority field. 'Send the packet to priority queue' is put the packets in the designated queue. 'Replace the 802.1 priority field with the IP TOS value' to replace the packet's 802.1 priority field with the value you set in the TOS field. 'Replace the 802.1p priority by inner 802.1p priority' to replace 802.1p priority by inner 802.1p priority if there is an inner vlan tag.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noChange(1), setThePackets802dot1Priority(2), sendThePacketToPriorityQueue(3), replaceThe802dot1PriorityFieldWithTheIpTosValue(4), replaceThe802dot1PriorityByInner802dot1Priority(5)

zyAclV2PolicyDiffServAction		1.3.6.1.4.1.890.1.15.3.105.2.1.1.13
There are four DiffServ actions for policy rule. 'No change' is keeping the TOS and/or DSCP fields in the packets. 'Set the packet's TOS field' is set the TOS field with the value you configure in the TOS field. 'Replace the IP TOS with the 802.1 priority value' is replace the TOS field with the value you configure in the Priority field. 'Set the Diffserv Codepoint field in the frame' to set the DSCP field with the value you configure in the DSCP field.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noChange(1), setThePacketsTosField(2), replaceTheIpTosFieldWithThe802dot1PriorityValue(3), setTheDiffservCodepointFieldInTheFrame(4)

zyAclV2PolicyOutgoingAction		1.3.6.1.4.1.890.1.15.3.105.2.1.1.14
There are four outgoing actions for policy rule. 'Send the packet to the mirror port' is sent the packet to the mirror port. 'Send the packet to the egress port' is sent the packet to the egress port. 'Send the matching frames to the egress port' is sent the matching policy rule frames to the egress port. 'Set the packets VLAN ID' is set packet with tag.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	sendThePacketToTheMirrorPort(0), sendThePacketToTheEgressPort(1), sendTheMatchingFramesToTheEgressPort(2), setThePacketVlanId(3)

zyAclV2PolicyMeteringState		1.3.6.1.4.1.890.1.15.3.105.2.1.1.15
Enable/Disable bandwidth limitation on the traffic flow(s) then set the actions to be taken on out-of-profile packets.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zyAclV2PolicyOutOfProfileAction		1.3.6.1.4.1.890.1.15.3.105.2.1.1.16
There are four out of profile actions for policy rule. 'Drop the packet' is discard the out-of-profile traffic. 'Change the DSCP value' is replace the DSCP field with the value specified in the Out of profile DSCP field. 'Set Out-Drop Precedence' is mark out-of-profile traffic and drop it when network is congested. 'Do not drop the matching frame previously marked for dropping' to queue the frames that are marked to be dropped.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	dropThePacket(0), changeTheDscpValue(1), setOutDropPrecedence(2), doNotDropTheMatchingFramePreviouslyMarkedForDropping(3)

zyAclV2PolicyRowstatus		1.3.6.1.4.1.890.1.15.3.105.2.1.1.17
This object shows the entry of policy rule status.
Status: current	Access: read-only
OBJECT-TYPE
	RowStatus

zyAclV2PolicyQueueAction		1.3.6.1.4.1.890.1.15.3.105.2.1.1.18
There are two queue actions for policy rule. 'No change' is keep the priority setting of the frames. 'Send the packet to priority queue' is put the packets in the designated queue.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noChange(1), sendThePacketToPriorityQueue(2)

zyAclV2TrapClassifierLogMatchCount		1.3.6.1.4.1.890.1.15.3.105.3.1
display log match count of specific classifier rule.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER

zyAclV2ClassifierLogNotification		1.3.6.1.4.1.890.1.15.3.105.4.1
classifier log information.
Status: current	Access: not-accessible
NOTIFICATION-TYPE