ZYXEL-IF-LOOPBACK-MIB

File: ZYXEL-IF-LOOPBACK-MIB.mib (5061 bytes)

Imported modules

RFC1155-SMI SNMPv2-SMI SNMPv2-TC
RFC1213-MIB P-BRIDGE-MIB Q-BRIDGE-MIB
BRIDGE-MIB IF-MIB SNMP-FRAMEWORK-MIB
INET-ADDRESS-MIB DISMAN-PING-MIB IEEE8021-CFM-MIB
OSPF-MIB ZYXEL-ES-SMI

Imported symbols

enterprises OBJECT-TYPE RowStatus
DateAndTime TruthValue StorageType
MacAddress TDomain TAddress
DisplayString EnabledStatus PortList
dot1dBasePort InterfaceIndexOrZero SnmpAdminString
InetAddressType InetAddress OperationResponseStatus
Counter TimeTicks BridgeId
Timeout dot1agCfmMdIndex dot1agCfmMaIndex
dot1agCfmMepIdentifier IpAddress ifIndex
NOTIFICATION-TYPE sysObjectID ospfIfIpAddress
ospfAddressLessIf ospfAreaId ospfNbrIpAddr
ospfNbrAddressLessIndex ospfLsdbAreaId ospfLsdbType
ospfLsdbLsid ospfLsdbRouterId ospfVirtIfAreaId
ospfVirtIfNeighbor esMgmt

Defined Types

ZyxelIfLoopbackEntry  
SEQUENCE    
  zyIfLoopbackId INTEGER
  zyIfLoopbackName OCTET STRING
  zyIfLoopbackIpAddress IpAddress
  zyIfLoopbackMask IpAddress
  zyIfLoopbackRowStatus RowStatus

Defined Values

zyxelIfLoopback 1.3.6.1.4.1.890.1.15.3.28
The subtree for loopback interface
MODULE-IDENTITY    

zyxelIfLoopbackSetup 1.3.6.1.4.1.890.1.15.3.28.1
OBJECT IDENTIFIER    

zyIfLoopbackMaxNumberOfIfs 1.3.6.1.4.1.890.1.15.3.28.1.1
The maximum number of loopback interface that can be created.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

zyxelIfLoopbackTable 1.3.6.1.4.1.890.1.15.3.28.1.2
The table contains loopback interface configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZyxelIfLoopbackEntry

zyxelIfLoopbackEntry 1.3.6.1.4.1.890.1.15.3.28.1.2.1
An entry contains loopback interface configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZyxelIfLoopbackEntry  

zyIfLoopbackId 1.3.6.1.4.1.890.1.15.3.28.1.2.1.1
Display the identification number of the loopback interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER  

zyIfLoopbackName 1.3.6.1.4.1.890.1.15.3.28.1.2.1.2
A descriptive name (up to 32 printable ASCII characters) for identification purposes.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

zyIfLoopbackIpAddress 1.3.6.1.4.1.890.1.15.3.28.1.2.1.3
The IP address of an IP routing domain that is associated to a loopback interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

zyIfLoopbackMask 1.3.6.1.4.1.890.1.15.3.28.1.2.1.4
The subnet mask of an IP routing domain that is associated to a loopback interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

zyIfLoopbackRowStatus 1.3.6.1.4.1.890.1.15.3.28.1.2.1.5
This object allows entries to be created and deleted from the loopback interface table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus