ZYXEL-MRSTP-MIB

File: ZYXEL-MRSTP-MIB.mib (27866 bytes)

Imported modules

RFC1155-SMI SNMPv2-SMI SNMPv2-TC
RFC1213-MIB P-BRIDGE-MIB Q-BRIDGE-MIB
BRIDGE-MIB IF-MIB SNMP-FRAMEWORK-MIB
INET-ADDRESS-MIB DISMAN-PING-MIB IEEE8021-CFM-MIB
OSPF-MIB ZYXEL-ES-SMI

Imported symbols

enterprises OBJECT-TYPE Counter32
RowStatus DateAndTime TruthValue
StorageType MacAddress DisplayString
EnabledStatus PortList dot1dBasePort
InterfaceIndexOrZero SnmpAdminString InetAddressType
InetAddress OperationResponseStatus Counter
TimeTicks BridgeId Timeout
dot1agCfmMdIndex dot1agCfmMaIndex dot1agCfmMepIdentifier
IpAddress ifIndex NOTIFICATION-TYPE
sysObjectID ospfIfIpAddress ospfAddressLessIf
ospfAreaId ospfNbrIpAddr ospfNbrAddressLessIndex
ospfLsdbAreaId ospfLsdbType ospfLsdbLsid
ospfLsdbRouterId ospfVirtIfAreaId ospfVirtIfNeighbor
esMgmt

Defined Types

ZyxelMrstpBridgeEntry  
SEQUENCE    
  zyMrstpBridgeIndex INTEGER
  zyMrstpBridgeState EnabledStatus
  zyMrstpBridgePriority INTEGER
  zyMrstpBridgeRootMaxAge Timeout
  zyMrstpBridgeRootHelloTime Timeout
  zyMrstpBridgeRootForwardDelay Timeout

ZyxelMrstpPortEntry  
SEQUENCE    
  zyMrstpPortPriority INTEGER
  zyMrstpPortEnable EnabledStatus
  zyMrstpPortPathCost INTEGER
  zyMrstpPortOnBridgeIndex INTEGER
  zyMrstpPortAdminEdgePort INTEGER

ZyxelMrstpBridgeInfoEntry  
SEQUENCE    
  zyMrstpBridgeInfoIndex INTEGER
  zyMrstpBridgeInfoProtocolSpecification INTEGER
  zyMrstpBridgeInfoTimeSinceTopologyChange TimeTicks
  zyMrstpBridgeInfoTopologyChanges Counter32
  zyMrstpBridgeInfoDesignatedRoot BridgeId
  zyMrstpBridgeInfoRootCost INTEGER
  zyMrstpBridgeInfoRootPort INTEGER
  zyMrstpBridgeInfoMaxAge Timeout
  zyMrstpBridgeInfoHelloTime Timeout
  zyMrstpBridgeInfoHoldTime INTEGER
  zyMrstpBridgeInfoForwardDelay Timeout
  zyMrstpBridgeInfoRootMaxAge Timeout
  zyMrstpBridgeInfoRootHelloTime Timeout
  zyMrstpBridgeInfoRootForwardDelay Timeout

ZyxelMrstpPortInfoEntry  
SEQUENCE    
  zyMrstpPortInfoState INTEGER
  zyMrstpPortInfoDesignatedRoot BridgeId
  zyMrstpPortInfoDesignatedCost INTEGER
  zyMrstpPortInfoDesignatedBridge BridgeId
  zyMrstpPortInfoDesignatedPort OCTET STRING
  zyMrstpPortInfoForwardTransitions Counter32
  zyMrstpPortInfoOperEdgePort INTEGER

Defined Values

zyxelMrstp 1.3.6.1.4.1.890.1.15.3.52
The subtree for Multiple Rapid Spanning Tree Protocol (MRSTP)
MODULE-IDENTITY    

zyxelMrstpSetup 1.3.6.1.4.1.890.1.15.3.52.1
OBJECT IDENTIFIER    

zyxelMrstpStatus 1.3.6.1.4.1.890.1.15.3.52.2
OBJECT IDENTIFIER    

zyxelMrstpNotifications 1.3.6.1.4.1.890.1.15.3.52.3
OBJECT IDENTIFIER    

zyxelMrstpBridgeTable 1.3.6.1.4.1.890.1.15.3.52.1.1
The table contains MRSTP bridge configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZyxelMrstpBridgeEntry

zyxelMrstpBridgeEntry 1.3.6.1.4.1.890.1.15.3.52.1.1.1
An entry contains MRSTP bridge configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZyxelMrstpBridgeEntry  

zyMrstpBridgeIndex 1.3.6.1.4.1.890.1.15.3.52.1.1.1.1
The tree index of the MRSTP.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER  

zyMrstpBridgeState 1.3.6.1.4.1.890.1.15.3.52.1.1.1.2
Enable/Disable on the mrstp bridge.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

zyMrstpBridgePriority 1.3.6.1.4.1.890.1.15.3.52.1.1.1.3
The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

zyMrstpBridgeRootMaxAge 1.3.6.1.4.1.890.1.15.3.52.1.1.1.4
The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of zyxelMrstpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Timeout 600..4000  

zyMrstpBridgeRootHelloTime 1.3.6.1.4.1.890.1.15.3.52.1.1.1.5
The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Timeout 100..1000  

zyMrstpBridgeRootForwardDelay 1.3.6.1.4.1.890.1.15.3.52.1.1.1.6
The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of mrstpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Timeout 400..3000  

zyxelMrstpPortTable 1.3.6.1.4.1.890.1.15.3.52.1.2
The table contains MRSTP port configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZyxelMrstpPortEntry

zyxelMrstpPortEntry 1.3.6.1.4.1.890.1.15.3.52.1.2.1
An entry contains MRSTP port configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZyxelMrstpPortEntry  

zyMrstpPortPriority 1.3.6.1.4.1.890.1.15.3.52.1.2.1.1
The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of mrstpPort.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

zyMrstpPortEnable 1.3.6.1.4.1.890.1.15.3.52.1.2.1.2
Enable/Disable the MRSTP on the port.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

zyMrstpPortPathCost 1.3.6.1.4.1.890.1.15.3.52.1.2.1.3
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

zyMrstpPortOnBridgeIndex 1.3.6.1.4.1.890.1.15.3.52.1.2.1.4
Indetify the bridge index that this port joined to in MRSTP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

zyMrstpPortAdminEdgePort 1.3.6.1.4.1.890.1.15.3.52.1.2.1.5
The administrative value of the Edge Port parameter. A value of true(1) indicates that this port should be assumed as an edge-port, and a value of false(2) indicates that this port should be assumed as a non-edge-port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2)  

zyxelMrstpBridgeInfoTable 1.3.6.1.4.1.890.1.15.3.52.2.1
The table contains MRSTP bridge information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZyxelMrstpBridgeInfoEntry

zyxelMrstpBridgeInfoEntry 1.3.6.1.4.1.890.1.15.3.52.2.1.1
An entry contains MRSTP bridge information.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZyxelMrstpBridgeInfoEntry  

zyMrstpBridgeInfoIndex 1.3.6.1.4.1.890.1.15.3.52.2.1.1.1
The tree index of the MRSTP.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER  

zyMrstpBridgeInfoProtocolSpecification 1.3.6.1.4.1.890.1.15.3.52.2.1.1.2
An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), decLb100(2), ieee8021d(3)  

zyMrstpBridgeInfoTimeSinceTopologyChange 1.3.6.1.4.1.890.1.15.3.52.2.1.1.3
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

zyMrstpBridgeInfoTopologyChanges 1.3.6.1.4.1.890.1.15.3.52.2.1.1.4
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

zyMrstpBridgeInfoDesignatedRoot 1.3.6.1.4.1.890.1.15.3.52.2.1.1.5
The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

zyMrstpBridgeInfoRootCost 1.3.6.1.4.1.890.1.15.3.52.2.1.1.6
The cost of the path to the root as seen from this bridge.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

zyMrstpBridgeInfoRootPort 1.3.6.1.4.1.890.1.15.3.52.2.1.1.7
The port number of the port which offers the lowest cost path from this bridge to the root bridge.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

zyMrstpBridgeInfoMaxAge 1.3.6.1.4.1.890.1.15.3.52.2.1.1.8
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
Status: current Access: read-only
OBJECT-TYPE    
  Timeout  

zyMrstpBridgeInfoHelloTime 1.3.6.1.4.1.890.1.15.3.52.2.1.1.9
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
Status: current Access: read-only
OBJECT-TYPE    
  Timeout  

zyMrstpBridgeInfoHoldTime 1.3.6.1.4.1.890.1.15.3.52.2.1.1.10
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

zyMrstpBridgeInfoForwardDelay 1.3.6.1.4.1.890.1.15.3.52.2.1.1.11
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge i currently using, in contrast to zyxelMrstpBridgeInfoForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.
Status: current Access: read-only
OBJECT-TYPE    
  Timeout  

zyMrstpBridgeInfoRootMaxAge 1.3.6.1.4.1.890.1.15.3.52.2.1.1.12
The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of zyxelMrstpBridgeInfoHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Timeout 600..4000  

zyMrstpBridgeInfoRootHelloTime 1.3.6.1.4.1.890.1.15.3.52.2.1.1.13
The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Timeout 100..1000  

zyMrstpBridgeInfoRootForwardDelay 1.3.6.1.4.1.890.1.15.3.52.2.1.1.14
The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of MrstpBridgeInfoMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Timeout 400..3000  

zyxelMrstpPortInfoTable 1.3.6.1.4.1.890.1.15.3.52.2.2
The table contains MRSTP port information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZyxelMrstpPortInfoEntry

zyxelMrstpPortInfoEntry 1.3.6.1.4.1.890.1.15.3.52.2.2.1
An entry contains MRSTP port information.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZyxelMrstpPortInfoEntry  

zyMrstpPortInfoState 1.3.6.1.4.1.890.1.15.3.52.2.2.1.1
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see MrstpPortInfoEnable), this object will have a value of disabled(1).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)  

zyMrstpPortInfoDesignatedRoot 1.3.6.1.4.1.890.1.15.3.52.2.2.1.2
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

zyMrstpPortInfoDesignatedCost 1.3.6.1.4.1.890.1.15.3.52.2.2.1.3
The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

zyMrstpPortInfoDesignatedBridge 1.3.6.1.4.1.890.1.15.3.52.2.2.1.4
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

zyMrstpPortInfoDesignatedPort 1.3.6.1.4.1.890.1.15.3.52.2.2.1.5
The Port Identifier of the port on the Designated Bridge for this port's segment.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

zyMrstpPortInfoForwardTransitions 1.3.6.1.4.1.890.1.15.3.52.2.2.1.6
The number of times this port has transitioned from the Learning state to the Forwarding state.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

zyMrstpPortInfoOperEdgePort 1.3.6.1.4.1.890.1.15.3.52.2.2.1.7
The operational value of the Edge Port parameter. The object is initialized to the value of the corresponding instance of dot1dStpPortAdminEdgePort. When the corresponding instance of dot1dStpPortAdminEdgePort is set, this object will be changed as well. This object will also be changed to false on reception of a BPDU.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

zyMrstpNewRoot 1.3.6.1.4.1.890.1.15.3.52.3.1
The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer, immediately subsequent to its election. Implementation of this trap is optional.
Status: current Access: read-only
NOTIFICATION-TYPE    

zyMrstpTopologyChange 1.3.6.1.4.1.890.1.15.3.52.3.2
A topologyChange is sent if the topology changed of MRSTP has detected.
Status: current Access: read-only
NOTIFICATION-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor