Zhone-CPE-MIB

Imported modules

IF-MIB	INET-ADDRESS-MIB	SNMPv2-CONF
SNMPv2-SMI	SNMPv2-TC	Zhone
Zhone-TC

Imported symbols

InterfaceIndex	InetAddress	OBJECT-GROUP
IpAddress	Integer32	Unsigned32
OBJECT-TYPE	MODULE-IDENTITY	OBJECT-IDENTITY
RowStatus	TruthValue	TEXTUAL-CONVENTION
zhoneRegPls	zhoneRegCpe	zhoneRegMux
zhoneRegSechtor	zhoneRegWtn	zhoneRegMalc
zhonePls	zhoneZedge	zhoneZplex
sechtor100	sechtor300	zhoneWtn
zhoneMalc	zhoneZmsProduct	zhoneSystem
zhoneShelf	zhoneCard	zhoneSubscriber
zhoneInterfaceTranslation	zhoneInterfaceGroup	zhoneMasterAgent
zhoneTrapModules	zhoneGenWtn	zhoneZAP
zhoneVoiceStats	zhoneIp	zhoneAtm
zhoneVoice	zhoneVoip	zhonePpp
zhoneIma	zhoneBridge	zhoneVideo
zhoneIsdn	zhoneCes	zhoneSs7
zhoneClass5	zhoneBonding	zhoneEnet
zhoneDsx	zhoneOcx	zhoneDsl
zhoneConsole	zhoneRadio	zhoneSonet
zhoneDs3Ext	zhoneLineTypes	zhoneApon
zhoneVdsl	zhoneGpon	zhoneWdm
zhoneCpe	zhoneModules	zhoneShelfIndex
zhoneSlotIndex	zhoneGroups	zhoneShelfSlotGroup
zhoneShelfSlotCompliance	apsMIB	sipTC
sipCommonMIB	sipUAMIB	pktcIetfSigMib
efmOamMIB	efmCuMIB	zhoneDrafts
ZhoneAdminString	ZhoneRowStatus	ZhoneEnabledFlag
ZhoneAdminState	ZhoneAlarmSeverity

Defined Types

TpType
Valid termination points on CPE devices.
TEXTUAL-CONVENTION
	INTEGER	physicalPathTerminationPointEthernetUNI(1), interworkingVCCTerminationPoint(2), mapperServiceProfile(3), ipHostConfigData(4), gemInterworkingTerminationPoint(5), multicastGEMInterworkingTerminationPoint(6), physicalPathTerminationPointxDSLUNIPartOne(7), physicalPathTerminationPointVDSLUNI(8), ethernetFlowTerminationPoint(9), physicalPathTerminationPointUNI(10), physicalPathTerminationPointRFvideoUNI(11), physicalPathTerminationPointIPTVUNI(12), h248VoiceTerminationPoint(13), sipVoiceTerminationPoint(14), sipPlarVoiceTerminationPoint(15), pweTerminationPoint(16), virtualEthernetInterfacePoint(17), dot11TerminationPoint(18), fiberLanTerminationPoint(19), tr69TerminationPoint(20), mgmtTerminationPoint(21), mgcpVoiceTerminationPoint(22)

ZhoneCpeTemplateType
Specifies TemplateType as voip/pwe/wifi/data/video.
TEXTUAL-CONVENTION
	INTEGER	voip(668), pwe(669), wifi(670), data(671), video(672)

ZhoneCpeSipDialPlanIndexEntry
SEQUENCE
	zhoneCpeSipDialPlanIndexNext	Unsigned32

ZhoneCpeSipDialPlanEntry
SEQUENCE
	zhoneCpeSipServerIndex	Unsigned32
	zhoneCpeSipDialPlanIndex	Unsigned32
	zhoneCpeSipDialPlanRowStatus	ZhoneRowStatus
	zhoneCpeSipDialPlanFormat	INTEGER
	zhoneCpeSipDialPlanString	OCTET STRING

ZhoneCpeVoipServerEntry
SEQUENCE
	zhoneCpeVoipServerIndex	Unsigned32
	zhoneCpeVoipServerRowStatus	ZhoneRowStatus
	zhoneCpeVoipProfileName	ZhoneAdminString
	zhoneCpeVoipPrimaryServer	InetAddress
	zhoneCpeVoipSecondaryServer	InetAddress
	zhoneCpeVoipServerSignallingProtocol	INTEGER
	zhoneCpeVoipSipRegExpirationTime	Unsigned32
	zhoneCpeVoipSipReRegHeadStartTime	Unsigned32
	zhoneCpeVoipSipDomain	InetAddress
	zhoneCpeVoipSipRegistrar	InetAddress
	zhoneCpeVoipSoftSwitch	ZhoneAdminString
	zhoneCpeVoipMgcVersion	Integer32
	zhoneCpeVoipMgcMessageFormat	INTEGER
	zhoneCpeVoipMgcMaximumRetryTime	Integer32
	zhoneCpeVoipMgcMaximumRetryAttempts	Integer32
	zhoneCpeVoipMgcServiceChangeDelay	Integer32
	zhoneCpeVoipMgcTerminationIdBase	OCTET STRING
	zhoneCpeVoipReleaseTimer	Integer32
	zhoneCpeVoipRohTimer	Integer32
	zhoneCpeVoipDscpMark	Integer32
	zhoneCpeVoipPiggyBackEvents	ZhoneEnabledFlag
	zhoneCpeVoipOobToneEvents	ZhoneEnabledFlag
	zhoneCpeVoipOobDtmfEvents	ZhoneEnabledFlag
	zhoneCpeVoipOobCasEvents	ZhoneEnabledFlag
	zhoneCpeVoipPartialDialTimeout	Integer32
	zhoneCpeVoipCriticalDialTimeout	Integer32
	zhoneCpeVoipServerOutboundServer	InetAddress
	zhoneCpeVoipServerPortId	Integer32
	zhoneCpeVoipDtmfEventsPassingMethod	INTEGER
	zhoneCpeVoipCasEventsPassingMethod	INTEGER
	zhoneCpeVoipRtpDscp	OCTET STRING
	zhoneCpeVoipSignalingDscp	OCTET STRING
	zhoneCpeVoipSipRegRetryTime	Unsigned32
	zhoneCpeVoipMgcpClientAddressMode	INTEGER
	zhoneCpeVoipMgcpPersistentNotify	ZhoneEnabledFlag

ZhoneCpeIpEntry
SEQUENCE
	zhoneCpeIfIndex	InterfaceIndex
	zhoneCpeIpServiceType	INTEGER
	zhoneCpeIpRowStatus	ZhoneRowStatus
	zhoneCpeHostIp	IpAddress
	zhoneCpeIpServerProfileIndex	Integer32

ZhoneCpeIpServerEntry
SEQUENCE
	zhoneCpeIpServerIndex	Unsigned32
	zhoneCpeIpServerRowStatus	ZhoneRowStatus
	zhoneCpeIpServerProfileName	ZhoneAdminString
	zhoneCpeIpServerHostIpOption	INTEGER
	zhoneCpeIpServerNetmask	IpAddress
	zhoneCpeIpServerGateway	IpAddress
	zhoneCpeIpServerPrimaryDns	IpAddress
	zhoneCpeIpServerSecondaryDns	IpAddress
	zhoneCpeIpServerFirewallAccess	BITS
	zhoneCpeIpServerNat	INTEGER
	zhoneCpeIpServerSecureForward	ZhoneEnabledFlag
	zhoneCpeIpServerIgmpFunction	INTEGER
	zhoneCpeIpServerDefaultIface	TruthValue
	zhoneCpeIpServerDnsSrc	TruthValue
	zhoneCpeIpServerDnsType	INTEGER

ZhoneCpeVoipFeaturesEntry
SEQUENCE
	zhoneCpeVoipFeaturesIndex	Unsigned32
	zhoneCpeVoipFeaturesRowStatus	ZhoneRowStatus
	zhoneCpeVoipFeaturesProfileName	ZhoneAdminString
	zhoneCpeVoipFeaturesAnnouncementType	INTEGER
	zhoneCpeVoipCidFeatures	BITS
	zhoneCpeVoipCallWaitingFeatures	BITS
	zhoneCpeVoipCallProgressOrTransferFeatures	BITS
	zhoneCpeVoipCallPresentationFeatures	BITS
	zhoneCpeVoipFeaturesHotLine	INTEGER
	zhoneCpeVoipFeaturesHotLineNumber	OCTET STRING
	zhoneCpeVoipFeaturesWarmLineTimer	Unsigned32

ZhoneCpeVoipMediaEntry
SEQUENCE
	zhoneCpeVoipMediaIndex	Unsigned32
	zhoneCpeVoipMediaRowStatus	ZhoneRowStatus
	zhoneCpeVoipMediaProfileName	ZhoneAdminString
	zhoneCpeVoipMediaEchoCancel	ZhoneEnabledFlag
	zhoneCpeVoipFaxMode	INTEGER
	zhoneCpeVoipCodecSelectionFirstOrder	INTEGER
	zhoneCpeVoipPacketPeriodSelectionFirstOrder	Integer32
	zhoneCpeVoipSilenceSuppressionFirstOrder	ZhoneEnabledFlag
	zhoneCpeVoipCodecSelectionSecondOrder	INTEGER
	zhoneCpeVoipPacketPeriodSelectionSecondOrder	Integer32
	zhoneCpeVoipSilenceSuppressionSecondOrder	ZhoneEnabledFlag
	zhoneCpeVoipCodecSelectionThirdOrder	INTEGER
	zhoneCpeVoipPacketPeriodSelectionThirdOrder	Integer32
	zhoneCpeVoipSilenceSuppressionThirdOrder	ZhoneEnabledFlag
	zhoneCpeVoipCodecSelectionFourthOrder	INTEGER
	zhoneCpeVoipPacketPeriodSelectionFourthOrder	Integer32
	zhoneCpeVoipSilenceSuppressionFourthOrder	ZhoneEnabledFlag

ZhoneCpeVoipSubscriberEntry
SEQUENCE
	zhoneCpeVoipSubscriberPortNumber	Unsigned32
	zhoneCpeVoipSubscriberRowStatus	ZhoneRowStatus
	zhoneCpeVoipSubscriberAdminState	ZhoneAdminState
	zhoneCpeVoipSubscriberDialNumber	ZhoneAdminString
	zhoneCpeVoipSubscriberDisplayName	OCTET STRING
	zhoneCpeVoipSubscriberUserName	OCTET STRING
	zhoneCpeVoipSubscriberPassword	OCTET STRING
	zhoneCpeVoipSubscriberImpedance	INTEGER
	zhoneCpeVoipSubscriberRxGain	Integer32
	zhoneCpeVoipSubscriberTxGain	Integer32
	zhoneCpeVoipSubscriberTransmissionPath	INTEGER
	zhoneCpeVoipSubscriberSignallingCode	INTEGER
	zhoneCpeVoipServerProfileIndex	Unsigned32
	zhoneCpeVoipFeaturesProfileIndex	Unsigned32
	zhoneCpeVoipMediaProfileIndex	Unsigned32
	zhoneCpeVoipSubscriberPhoneFollowsWan	ZhoneEnabledFlag

ZhoneCpeEthSubscriberEntry
SEQUENCE
	zhoneCpeEthSubscriberPortNumber	Unsigned32
	zhoneCpeEthSubscriberRowStatus	ZhoneRowStatus
	zhoneCpeEthSubscriberAdminState	ZhoneAdminState
	zhoneCpeEthSubscriberLoopback	ZhoneEnabledFlag
	zhoneCpeEthSubscriberRate	INTEGER
	zhoneCpeEthSubscriberDuplex	INTEGER
	zhoneCpeEthSubscriberMtu	Unsigned32
	zhoneCpeEthSubscriberPortType	INTEGER
	zhoneCpeEthSubscriberPauseTime	Unsigned32
	zhoneCpeEthSubscriberMode	INTEGER
	zhoneCpeEthSubscriberPowerFeed	ZhoneEnabledFlag
	zhoneCpeVideoProfileIndex	Unsigned32
	zhoneCpeTrafficManagementProfileIndex	Unsigned32
	zhoneCpeEthSubscriberLineStatusAlarm	ZhoneEnabledFlag
	zhoneCpeEthSubscriberAlarmSeverity	ZhoneAlarmSeverity
	zhoneCpeEthSubscriberPowerShed	ZhoneEnabledFlag
	zhoneCpeEthSubscriberPowerRange	INTEGER
	zhoneCpeEthSubscriberLldpMedList	Unsigned32

ZhoneCpeVideoEntry
SEQUENCE
	zhoneCpeVideoIndex	Unsigned32
	zhoneCpeGemPort	Unsigned32
	zhoneCpeVlan	Unsigned32
	zhoneCpeVideoRowStatus	ZhoneRowStatus
	zhoneCpeVideoProfileName	ZhoneAdminString
	zhoneCpeVideoMaxSimultaneousGroups	Unsigned32
	zhoneCpeVideoMaxMulticastBandwidth	Unsigned32
	zhoneCpeVideoBandwidthEnforce	TruthValue
	zhoneCpeVideoIgmpVersion	INTEGER
	zhoneCpeVideoIgmpFunction	INTEGER
	zhoneCpeVideoImmediateLeave	ZhoneEnabledFlag
	zhoneCpeVideoUpstreamIgmpRate	Unsigned32
	zhoneCpeVideoRobustness	Unsigned32
	zhoneCpeVideoAccessControlList	Unsigned32

ZhoneCpeVideoAccessControlIndexEntry
SEQUENCE
	zhoneCpeVideoAccessControlIndexNext	Unsigned32

ZhoneCpeVideoAccessControlEntry
SEQUENCE
	zhoneCpeVideoAccessControlListIndex	Unsigned32
	zhoneCpeVideoAccessControlEntryIndex	Unsigned32
	zhoneCpeVideoAccessControlRowStatus	ZhoneRowStatus
	zhoneCpeVideoAccessControlProfileName	ZhoneAdminString
	zhoneCpeVideoAccessControlType	INTEGER
	zhoneCpeVideoAccessControlSrcIp	IpAddress
	zhoneCpeVideoAccessControlDstIpStart	IpAddress
	zhoneCpeVideoAccessControlDstIpEnd	IpAddress
	zhoneCpeVideoAccessControlImputedGroupBw	Unsigned32

ZhoneCpePweSubscriberEntry
SEQUENCE
	zhoneCpePweSubscriberPortNumber	Unsigned32
	zhoneCpePweSubscriberRowStatus	ZhoneRowStatus
	zhoneCpePweSubscriberAdminState	ZhoneAdminState
	zhoneCpePweSubscriberLoopback	INTEGER
	zhoneCpePweSubscriberNearEndPort	Unsigned32
	zhoneCpePweSubscriberFarEndIp	IpAddress
	zhoneCpePweSubscriberFarEndPort	Unsigned32
	zhoneCpePweSubscriberLineLength	Unsigned32
	zhoneCpePweProfileIndex	Unsigned32
	zhoneCpePweSubscriberLineStatusAlarm	ZhoneEnabledFlag
	zhoneCpePweSubscriberAlarmSeverity	ZhoneAlarmSeverity

ZhoneCpePweEntry
SEQUENCE
	zhoneCpePweIndex	Unsigned32
	zhoneCpePweRowStatus	ZhoneRowStatus
	zhoneCpePweProfileName	ZhoneAdminString
	zhoneCpePweLineType	INTEGER
	zhoneCpePweEncoding	INTEGER
	zhoneCpePweDs1Mode	INTEGER
	zhoneCpePweDs1Framing	INTEGER
	zhoneCpePweTransport	INTEGER
	zhoneCpePweServiceType	INTEGER
	zhoneCpePweSignalling	INTEGER
	zhoneCpePwePayloadSize	Unsigned32
	zhoneCpePwePayloadEncapsulationDelay	INTEGER
	zhoneCpePweTimingMode	INTEGER
	zhoneCpePweChannelAssign	BITS
	zhoneCpePweClockReference	Unsigned32
	zhoneCpePweRtpTimeStampMode	INTEGER
	zhoneCpePwePtypePayload	Unsigned32
	zhoneCpePwePtypeSignalling	Unsigned32
	zhoneCpePweSSrcPayload	Unsigned32
	zhoneCpePweSSrcSignalling	Unsigned32
	zhoneCpePweExpectedPTypePayload	Unsigned32
	zhoneCpePweExpectedPTypeSignalling	Unsigned32
	zhoneCpePweExpectedSSrcPayload	Unsigned32
	zhoneCpePweExpectedSSrcSignalling	Unsigned32
	zhoneCpePweJitterBufMax	Unsigned32
	zhoneCpePweJitterBufDesired	Unsigned32
	zhoneCpePweFillPolicy	INTEGER
	zhoneCpePweMisconnectedDeclarePolicy	Unsigned32
	zhoneCpePweMisconnectedClearPolicy	Unsigned32
	zhoneCpePweLossPacketDeclarePolicy	Unsigned32
	zhoneCpePweLossPacketClearPolicy	Unsigned32
	zhoneCpePweOverrunUnderrunDeclarePolicy	Unsigned32
	zhoneCpePweOverrunUnderrunClearPolicy	Unsigned32
	zhoneCpePweMalformedDeclarePolicy	Unsigned32
	zhoneCpePweMalformedClearPolicy	Unsigned32
	zhoneCpePweRBitTransmitSetPolicy	Unsigned32
	zhoneCpePweRBitTransmitClearPolicy	Unsigned32
	zhoneCpePweRBitReceivePolicy	INTEGER
	zhoneCpePweLBitReceivePolicy	INTEGER
	zhoneCpePweSesThreshold	Unsigned32
	zhoneCpePweCdvTolerance	Unsigned32
	zhoneCpePweChannelAssociatedSignalling	INTEGER
	zhoneCpePweMplsTpType	INTEGER
	zhoneCpePweDscp	OCTET STRING

ZhoneCpeOnuModelInfoEntry
SEQUENCE
	zhoneCpeOnuModelInfoIndex	Unsigned32
	zhoneCpeOnuModelName	ZhoneAdminString
	zhoneCpeOnuBatteryBackup	TruthValue
	zhoneCpeOnuSipPlarSupported	TruthValue
	zhoneCpeOnuEthSlotNumber	Unsigned32
	zhoneCpeOnuNumberOfEthPorts	Unsigned32
	zhoneCpeOnuPotsSlotNumber	Unsigned32
	zhoneCpeOnuNumberOfPotsPorts	Unsigned32
	zhoneCpeOnuRfVideoSlotNumber	Unsigned32
	zhoneCpeOnuNumberOfRfVideoPorts	Unsigned32
	zhoneCpeOnuCesSlotNumber	Unsigned32
	zhoneCpeOnuNumberOfCesPorts	Unsigned32
	zhoneCpeOnuModelInfoRGBridged	TruthValue
	zhoneCpeOnuNumberOfWlanPorts	Unsigned32
	zhoneCpeOnuModelInfoRg	TruthValue
	zhoneCpeOnuModelInfoRgVoip	TruthValue
	zhoneCpeOnuModelInfoRgPwe	TruthValue
	zhoneCpeOnuModelInfoTftpDnld	TruthValue
	zhoneCpeOnuSipSupported	TruthValue
	zhoneCpeOnuH248Supported	TruthValue
	zhoneCpeOnuMgcpSupported	TruthValue
	zhoneCpeOnuT1Supported	TruthValue
	zhoneCpeOnuE1Supported	TruthValue
	zhoneCpeOnuNumberOfPoEPorts	Unsigned32

ZhoneCpeConnectionEntry
SEQUENCE
	zhoneCpePortIfIndex	InterfaceIndex
	zhoneCpeTpType	TpType
	zhoneCpeTpIndex	Unsigned32
	zhoneCpeVlanId	Unsigned32
	zhoneCpeSlanId	Unsigned32
	zhoneCpeConnectionRowStatus	ZhoneRowStatus
	zhoneCpeConnectionVlanCos	Unsigned32
	zhoneCpeConnectionVlanTpId	Unsigned32
	zhoneCpeConnectionSlanCos	Unsigned32
	zhoneCpeConnectionSlanTpId	Unsigned32
	zhoneCpeConnectionTranslateVlanId	Unsigned32
	zhoneCpeConnectionTranslateVlanCos	Unsigned32
	zhoneCpeConnectionTranslateVlanTpId	Unsigned32
	zhoneCpeConnectionTranslateSlanId	Unsigned32
	zhoneCpeConnectionTranslateSlanCos	Unsigned32
	zhoneCpeConnectionTranslateSlanTpId	Unsigned32
	zhoneCpeConnectionFloodingGport	Unsigned32
	zhoneCpeConnectionVideoGport	Unsigned32
	zhoneCpeConnectionDscpToCosProfileIndex	Unsigned32
	zhoneCpeConnectionRgMode	INTEGER
	zhoneCpeConnectionGuidedVlanId	Unsigned32
	zhoneCpeConnectionGuidedCos	Unsigned32

ZhoneCpeRfSubscriberEntry
SEQUENCE
	zhoneCpeRfSubscriberPortNumber	Unsigned32
	zhoneCpeRfSubscriberRowStatus	ZhoneRowStatus
	zhoneCpeRfSubscriberAdminState	ZhoneAdminState
	zhoneCpeRfSubscriberLineStatusAlarm	ZhoneEnabledFlag
	zhoneCpeRfSubscriberAlarmSeverity	ZhoneAlarmSeverity

ZhoneCpeTrafficManagementEntry
SEQUENCE
	zhoneCpeTrafficManagementIndex	Unsigned32
	zhoneCpeTrafficManagementRowStatus	ZhoneRowStatus
	zhoneCpeTrafficManagementProfileName	ZhoneAdminString
	zhoneCpeTrafficManagementUpstreamSIR	Unsigned32
	zhoneCpeTrafficManagementUpstreamPIR	Unsigned32
	zhoneCpeTrafficManagementUpstreamPriority	Unsigned32
	zhoneCpeTrafficManagementUpstreamWeight	Unsigned32
	zhoneCpeTrafficManagementDownstreamSIR	Unsigned32
	zhoneCpeTrafficManagementDownstreamPIR	Unsigned32
	zhoneCpeTrafficManagementDownstreamPriority	Unsigned32
	zhoneCpeTrafficManagementDownstreamWeight	Unsigned32
	zhoneCpeTrafficManagementPeakBurstSize	Unsigned32

ZhoneCpeSystemEntry
SEQUENCE
	zhoneCpeSystemRowStatus	ZhoneRowStatus
	zhoneCpeSystemCommonProfileIndex	Unsigned32
	zhoneCpeSystemMgcpClientName	OCTET STRING

ZhoneCpeSystemCommonEntry
SEQUENCE
	zhoneCpeSystemCommonIndex	Unsigned32
	zhoneCpeSystemCommonRowStatus	ZhoneRowStatus
	zhoneCpeSystemCommonProfileName	ZhoneAdminString
	zhoneCpeSystemCommonFirewall	ZhoneEnabledFlag
	zhoneCpeSystemCommonSyncCookieProtection	ZhoneEnabledFlag
	zhoneCpeSystemCommonCrossVlanRouting	ZhoneEnabledFlag
	zhoneCpeStaticRouteListProfileIndex	Unsigned32
	zhoneCpeDnsHostListProfile	Unsigned32
	zhoneCpeSystemCommonTr69Inform	ZhoneEnabledFlag
	zhoneCpeSystemCommonInformInterval	Unsigned32
	zhoneCpeSystemCommonAcsUrl	OCTET STRING
	zhoneCpeSystemCommonAcsUsername	OCTET STRING
	zhoneCpeSystemCommonAcsPassword	OCTET STRING
	zhoneCpeSystemCommonAdminPassword	OCTET STRING
	zhoneCpeSystemCommonSupportPassword	OCTET STRING
	zhoneCpeSystemCommonUserPassword	OCTET STRING
	zhoneCpeSystemCommonPowerSupply	Unsigned32
	zhoneCpeSystemCommonPowerShutdownDelay	Unsigned32
	zhoneCpeSystemCommonPowerRestoreDelay	Unsigned32

ZhoneCpeInterfaceVlanEntry
SEQUENCE
	zhoneCpeInterfaceVlanRowStatus	ZhoneRowStatus
	zhoneCpeInterfaceVlanRgMode	INTEGER
	zhoneCpeInterfaceVlanTranslateVlanId	Unsigned32
	zhoneCpeInterfaceVlanTranslateVlanCos	Unsigned32
	zhoneCpeInterfaceVlanTranslateSlanId	Unsigned32
	zhoneCpeInterfaceVlanTranslateSlanCos	Unsigned32
	zhoneCpeInterfaceVlanTranslateSlanTpId	Unsigned32
	zhoneCpeInterfaceVlanIpAddress	IpAddress
	zhoneCpeIpServerProfile	Unsigned32
	zhoneCpeDhcpServerProfileIndex	Unsigned32
	zhoneCpePortFwdListProfileIndex	Unsigned32

ZhoneCpeDhcpServerEntry
SEQUENCE
	zhoneCpeDhcpServerIndex	Unsigned32
	zhoneCpeDhcpServerRowStatus	ZhoneRowStatus
	zhoneCpeDhcpServerProfileName	ZhoneAdminString
	zhoneCpeDhcpServerStartAddress	IpAddress
	zhoneCpeDhcpServerEndAddress	IpAddress
	zhoneCpeDhcpServerLeaseTime	Integer32
	zhoneCpeDhcpServerConditionalServerListProfile	Unsigned32

ZhoneCpePppoeEntry
SEQUENCE
	zhoneCpePppoeRowStatus	ZhoneRowStatus
	zhoneCpePppoeUsername	OCTET STRING
	zhoneCpePppoePassword	OCTET STRING
	zhoneCpePppoeAuthentication	INTEGER
	zhoneCpePppoeRetryInterval	Unsigned32

ZhoneCpeWlanSubscriberEntry
SEQUENCE
	zhoneCpeWlanSubscriberIndex	Unsigned32
	zhoneCpeWlanSubscriberRowStatus	ZhoneRowStatus
	zhoneCpeWlanSubscriberAdminState	ZhoneAdminState
	zhoneCpeWlanSubscriberSsid	OCTET STRING
	zhoneCpeWlanSubscriberEncryptKey	OCTET STRING
	zhoneCpeWlanSubscriberDevicePin	OCTET STRING
	zhoneCpeWlanSubscriberRadiusKey	OCTET STRING
	zhoneCpeWlanProfileIndex	Unsigned32
	zhoneCpeAccessControlListProfileIndex	Unsigned32
	zhoneCpeWdsMacListProfileIndex	Unsigned32
	zhoneCpeWlanAdvProfileIndex	Unsigned32

ZhoneCpeWlanEntry
SEQUENCE
	zhoneCpeWlanIndex	Unsigned32
	zhoneCpeWlanRowStatus	ZhoneRowStatus
	zhoneCpeWlanProfileName	ZhoneAdminString
	zhoneCpeWlanHideAccessPoint	ZhoneEnabledFlag
	zhoneCpeWlanIsolateClients	ZhoneEnabledFlag
	zhoneCpeWlanWmmAdvertise	ZhoneEnabledFlag
	zhoneCpeWlanMcastFwd	ZhoneEnabledFlag
	zhoneCpeWlanMaxClients	Unsigned32
	zhoneCpeWlanNetAuthentication	INTEGER
	zhoneCpeWlanWpaGroupRekeyInterval	Unsigned32
	zhoneCpeWlanWpaEncryption	INTEGER
	zhoneCpeWlanWepEncryption	ZhoneEnabledFlag
	zhoneCpeWlanWepStrength	INTEGER
	zhoneCpeWlanRadiusServerIp	IpAddress
	zhoneCpeWlanRadiusPort	Unsigned32
	zhoneCpeWlanWpa2PreAuthentication	ZhoneEnabledFlag
	zhoneCpeWlanNetReAuthenticationInterval	Unsigned32

ZhoneCpeStaticRouteListEntry
SEQUENCE
	zhoneCpeStaticRouteListIndex	Unsigned32
	zhoneCpeStaticRouteListRowStatus	ZhoneRowStatus
	zhoneCpeStaticRouteListProfileName	ZhoneAdminString

ZhoneCpeStaticRouteIndexEntry
SEQUENCE
	zhoneCpeStaticRouteEntryIndexNext	Unsigned32

ZhoneCpeStaticRouteEntry
SEQUENCE
	zhoneCpeStaticRouteEntryIndex	Unsigned32
	zhoneCpeStaticRouteRowStatus	ZhoneRowStatus
	zhoneCpeStaticRouteDestinationIp	IpAddress
	zhoneCpeStaticRouteNetmask	IpAddress
	zhoneCpeStaticRouteGateway	IpAddress
	zhoneCpeStaticRouteMetric	Integer32

ZhoneCpePortFwdListEntry
SEQUENCE
	zhoneCpePortFwdListIndex	Unsigned32
	zhoneCpePortFwdListRowStatus	ZhoneRowStatus
	zhoneCpePortFwdListProfileName	ZhoneAdminString

ZhoneCpePortFwdIndexEntry
SEQUENCE
	zhoneCpePortFwdEntryIndexNext	Unsigned32

ZhoneCpePortFwdEntry
SEQUENCE
	zhoneCpePortFwdEntryIndex	Unsigned32
	zhoneCpePortFwdRowStatus	ZhoneRowStatus
	zhoneCpePortFwdType	INTEGER
	zhoneCpePortFwdPortStart	Unsigned32
	zhoneCpePortFwdPortEnd	Unsigned32
	zhoneCpePortFwdProtocol	INTEGER
	zhoneCpePortFwdPrivatePort	Unsigned32
	zhoneCpePortFwdPrivateIp	IpAddress

ZhoneCpeServiceApplicationEntry
SEQUENCE
	zhoneCpeServiceApplicationTemplateType	ZhoneCpeTemplateType
	zhoneCpeServiceApplicationTemplateId	Unsigned32
	zhoneCpeServiceApplicationVirtualConnection	Unsigned32
	zhoneCpeServiceApplicationTpType	TpType
	zhoneCpeServiceApplicationTpIndex	Unsigned32
	zhoneCpeServiceApplicationRowStatus	ZhoneRowStatus
	zhoneCpeServiceApplicationVlan	Unsigned32
	zhoneCpeServiceApplicationSlan	Unsigned32

ZhoneCpeDnsHostListEntry
SEQUENCE
	zhoneCpeDnsHostListIndex	Unsigned32
	zhoneCpeDnsHostListRowStatus	RowStatus
	zhoneCpeDnsHostListProfileName	ZhoneAdminString

ZhoneCpeDnsHostIndexEntry
SEQUENCE
	zhoneCpeDnsHostIndexEntryIndexNext	Integer32

ZhoneCpeDnsHostEntry
SEQUENCE
	zhoneCpeDnsHostEntryIndex	Unsigned32
	zhoneCpeDnsHostRowStatus	RowStatus
	zhoneCpeDnsHostDomainName	OCTET STRING
	zhoneCpeDnsHostIpAddress	IpAddress

ZhoneCpeWlanAdvancedEntry
SEQUENCE
	zhoneCpeWlanAdvIndex	Unsigned32
	zhoneCpeWlanAdvRowStatus	ZhoneRowStatus
	zhoneCpeWlanAdvProfileName	ZhoneAdminString
	zhoneCpeWlanAdvChannel	INTEGER
	zhoneCpeWlanAdvAutoChanTimer	Unsigned32
	zhoneCpeWlanAdvDot11nMode	INTEGER
	zhoneCpeWlanAdvDot11nRate	INTEGER
	zhoneCpeWlanAdvDot1nProtection	INTEGER
	zhoneCpeWlanAdvDot1nClientOnly	ZhoneEnabledFlag
	zhoneCpeWlanAdvRate54G	INTEGER
	zhoneCpeWlanAdvMcastRate	INTEGER
	zhoneCpeWlanAdvBasicRate	INTEGER
	zhoneCpeWlanAdvFragmentationThreshold	Unsigned32
	zhoneCpeWlanAdvRtsThreshold	Unsigned32
	zhoneCpeWlanAdvDtimInterval	Unsigned32
	zhoneCpeWlanAdvBeaconInterval	Unsigned32
	zhoneCpeWlanAdvGlobalMaxClients	Unsigned32
	zhoneCpeWlanAdvXpressTechnology	ZhoneEnabledFlag
	zhoneCpeWlanAdvTxPower	Unsigned32
	zhoneCpeWlanAdvWmm	ZhoneEnabledFlag
	zhoneCpeWlanAdvWmmNoAck	ZhoneEnabledFlag
	zhoneCpeWlanAdvWmmApsd	ZhoneEnabledFlag
	zhoneCpeWlanAdvApMode	INTEGER
	zhoneCpeWlanAdvBridgeRestrict	INTEGER
	zhoneCpeWlanAdvWps	ZhoneEnabledFlag
	zhoneCpeWlanAdvWpsAddClientMethod	INTEGER
	zhoneCpeWlanAdvWpsApMode	INTEGER

ZhoneCpeCondDhcpSrvListEntry
SEQUENCE
	zhoneCpeCondDhcpSrvListIndex	Unsigned32
	zhoneCpeCondDhcpSrvListRowStatus	RowStatus
	zhoneCpeCondDhcpSrvListProfileName	ZhoneAdminString

ZhoneCpeCondDhcpSrvIndexEntry
SEQUENCE
	zhoneCpeCondDhcpSrvIndexEntryIndexNext	Integer32

ZhoneCpeCondDhcpSrvEntry
SEQUENCE
	zhoneCpeCondDhcpSrvEntryIndex	Unsigned32
	zhoneCpeCondDhcpSrvRowStatus	RowStatus
	zhoneCpeCondDhcpSrvAdminState	ZhoneEnabledFlag
	zhoneCpeCondDhcpSrvPriorityOrder	Integer32
	zhoneCpeCondDhcpVciOui	ZhoneAdminString
	zhoneCpeCondDhcpSrvVciMatch	INTEGER
	zhoneCpeCondDhcpSrvStartAddr	IpAddress
	zhoneCpeCondDhcpSrvEndAddr	IpAddress
	zhoneCpeCondDhcpSrvWanVlan	Unsigned32
	zhoneCpeCondDhcpSrvPortFwdRule	ZhoneEnabledFlag
	zhoneCpeCondDhcpSrvStartPort	Unsigned32
	zhoneCpeCondDhcpSrvPrivatePort	Unsigned32
	zhoneCpeCondDhcpSrvProtocol	INTEGER
	zhoneCpeCondDhcpSrvPriDns	IpAddress
	zhoneCpeCondDhcpSrvSecDns	IpAddress
	zhoneCpeCondDhcpSrvPriNpt	IpAddress
	zhoneCpeCondDhcpSrvSecNpt	IpAddress
	zhoneCpeCondDhcpSrvVsi	ZhoneAdminString
	zhoneCpeCondDhcpSrvPermanent	ZhoneEnabledFlag

ZhoneCpeLldpMedPolicyListEntry
SEQUENCE
	zhoneCpeLldpMedPolicyListIndex	Unsigned32
	zhoneCpeLldpMedPolicyListRowStatus	RowStatus
	zhoneCpeLldpMedPolicyListProfileName	ZhoneAdminString

ZhoneCpeLldpMedPolicyIndexEntry
SEQUENCE
	zhoneCpeLldpMedPolicyIndexEntryIndexNext	Integer32

ZhoneCpeLldpMedPolicyEntry
SEQUENCE
	zhoneCpeLldpMedPolicyEntryIndex	Unsigned32
	zhoneCpeLldpMedPolicyRowStatus	RowStatus
	zhoneCpeLldpMedPolicyAdminState	ZhoneEnabledFlag
	zhoneCpeLldpMedPolicyAppType	INTEGER
	zhoneCpeLldpMedPolicyVlanId	Unsigned32
	zhoneCpeLldpMedPolicyCos	Unsigned32
	zhoneCpeLldpMedPolicyDscp	OCTET STRING

ZhoneCpeAutoCfgRuleEntry
SEQUENCE
	zhoneCpeAutoCfgRuleIndex	Unsigned32
	zhoneCpeAutoCfgRuleAdminState	ZhoneAdminState
	zhoneCpeAutoCfgRulePriority	Integer32
	zhoneCpeAutoCfgRuleMatchExpression	OCTET STRING
	zhoneCpeAutoCfgRuleServiceTemplate	InterfaceIndex
	zhoneCpeAutoCfgRuleTargetUni	OCTET STRING
	zhoneCpeAutoCfgRuleDeleteBeforeApply	TruthValue
	zhoneCpeAutoCfgRuleRowStatus	ZhoneRowStatus
	zhoneCpeAutoCfgRuleProfileName	ZhoneAdminString

Defined Values

zhoneCpeMIB		1.3.6.1.4.1.5504.6.118
This is the Zhone CPE mib which contains SNMP objects for the CPE voice and pseudowire.
MODULE-IDENTITY

zhoneCpeObjectID		1.3.6.1.4.1.5504.5.16.1
OBJECT IDENTIFIER

zhoneCpeSipDialPlan		1.3.6.1.4.1.5504.5.16.1.1
Cpe Sip Dial plan for the VoIP feature.
Status: current	Access: read-only
OBJECT-IDENTITY

zhoneCpeSipDialPlanIndexTable		1.3.6.1.4.1.5504.5.16.1.1.1
Table of next available index values for each CPE SIP Dialplan group.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeSipDialPlanIndexEntry

zhoneCpeSipDialPlanIndexEntry		1.3.6.1.4.1.5504.5.16.1.1.1.1
Row in the zhoneCpeSipDialPlanIndexTable
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeSipDialPlanIndexEntry

zhoneCpeSipDialPlanIndexNext		1.3.6.1.4.1.5504.5.16.1.1.1.1.1
This represents the next available index value for SIP dial plan profile.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeSipDialPlanTable		1.3.6.1.4.1.5504.5.16.1.1.2
Cpe Sip Dial plan table for the VoIP feature.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeSipDialPlanEntry

zhoneCpeSipDialPlanEntry		1.3.6.1.4.1.5504.5.16.1.1.2.1
Row in the CpeSipDialPlan table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeSipDialPlanEntry

zhoneCpeSipServerIndex		1.3.6.1.4.1.5504.5.16.1.1.2.1.1
This represents the SIP dial plan server index value.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeSipDialPlanIndex		1.3.6.1.4.1.5504.5.16.1.1.2.1.2
This represents the SIP dial plan index value.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeSipDialPlanRowStatus		1.3.6.1.4.1.5504.5.16.1.1.2.1.3
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpeSipDialPlanFormat		1.3.6.1.4.1.5504.5.16.1.1.2.1.4
DialPlanFormat defines the dial plan format standard that is supported in the ONT for VoIP.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	h248(1), nsc(2), vendorspecific(3)

zhoneCpeSipDialPlanString		1.3.6.1.4.1.5504.5.16.1.1.2.1.5
SipDialPlan contains a dial plan used by the VoIP service.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(1..64)

zhoneCpeVoipServer		1.3.6.1.4.1.5504.5.16.1.2
Cpe Voip Server for the VoIP feature.
Status: current	Access: read-create
OBJECT-IDENTITY

zhoneCpeVoipServerIndexNext		1.3.6.1.4.1.5504.5.16.1.2.1
This object contains an appropriate value to be used for the zhoneCpeVoipServerIndex when creating entries in the zhoneCpeVoipServerTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeVoipServerIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zhoneCpeVoipServerTable		1.3.6.1.4.1.5504.5.16.1.2.2
Cpe Voip Server table for the VoIP feature.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeVoipServerEntry

zhoneCpeVoipServerEntry		1.3.6.1.4.1.5504.5.16.1.2.2.1
Row in the VoipServer table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeVoipServerEntry

zhoneCpeVoipServerIndex		1.3.6.1.4.1.5504.5.16.1.2.2.1.1
This represents the CPE Voip Server Index value.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeVoipServerRowStatus		1.3.6.1.4.1.5504.5.16.1.2.2.1.2
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpeVoipProfileName		1.3.6.1.4.1.5504.5.16.1.2.2.1.3
CPE Voip Server profile for the VoIP services for the dynamic bridging. This field is only writable upon creation and must be unique within its table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminString

zhoneCpeVoipPrimaryServer		1.3.6.1.4.1.5504.5.16.1.2.2.1.4
This attribute contains the name (IP address or resolved name) of the primary MGC or SIP proxy server that controls the signaling messages.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress

zhoneCpeVoipSecondaryServer		1.3.6.1.4.1.5504.5.16.1.2.2.1.5
This attribute contains the name (IP address or resolved name) of the secondary or backup MGC that controls the signalling messages.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress

zhoneCpeVoipServerSignallingProtocol		1.3.6.1.4.1.5504.5.16.1.2.2.1.6
This attribute specifies the VoIP signalling protocol to use.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	sip(1), sipplar(2), h248(3), mgcp(4)

zhoneCpeVoipSipRegExpirationTime		1.3.6.1.4.1.5504.5.16.1.2.2.1.7
Sip Reg Expiration Time specifies the SIP registration expiration time in seconds. If its value is 0, the SIP agent does not add an expiration time to the registration requests and does not perform re-registration. The default value is 3600 seconds.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeVoipSipReRegHeadStartTime		1.3.6.1.4.1.5504.5.16.1.2.2.1.8
Sip ReReg Head Star Time specifies the time in seconds prior to timeout that causes the SIP agent to start the re-registration process. The default value is 360 seconds.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeVoipSipDomain		1.3.6.1.4.1.5504.5.16.1.2.2.1.9
This attribute contains the host or domain part of the SIP address of record for users connected to this ONT.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress

zhoneCpeVoipSipRegistrar		1.3.6.1.4.1.5504.5.16.1.2.2.1.10
Sip Registrar points to a network address ME that contains the name (IP 25 address or resolved name) of the registrar server for SIP signalling messages.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress

zhoneCpeVoipSoftSwitch		1.3.6.1.4.1.5504.5.16.1.2.2.1.11
Soft switch identifies the SIP gateway softswitch vendor. The format is four ASCII coded alphabetic characters [A..Z] as defined in ANSI T1.220. A 30 value of four null characters indicates no particular vendor.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminString

zhoneCpeVoipMgcVersion		1.3.6.1.4.1.5504.5.16.1.2.2.1.12
This integer attribute reports the version of the Megaco protocol in use.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..255

zhoneCpeVoipMgcMessageFormat		1.3.6.1.4.1.5504.5.16.1.2.2.1.13
This attribute defines the message format.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	long(1), short(2), binary(3)

zhoneCpeVoipMgcMaximumRetryTime		1.3.6.1.4.1.5504.5.16.1.2.2.1.14
This attribute specifies the maximum retry time for MGC transactions, in seconds. The default value 0 specifies vendor-specific implementation.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

zhoneCpeVoipMgcMaximumRetryAttempts		1.3.6.1.4.1.5504.5.16.1.2.2.1.15
This attribute specifies the maximum number of times a message is retransmitted to the MGC. The default value 0 specifies vendor specific implementation.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

zhoneCpeVoipMgcServiceChangeDelay		1.3.6.1.4.1.5504.5.16.1.2.2.1.16
The attribute specifies the service status delay time for changes in line service status. This attribute is specified in seconds. The default value 0 specifies no delay.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

zhoneCpeVoipMgcTerminationIdBase		1.3.6.1.4.1.5504.5.16.1.2.2.1.17
The attribute specifies the base string for the H.248 physical termination id(s) for this ONT. This string is intended to uniquely identify an ONT. Vendor specific termination identifiers (i.e. port ids) are optionally added to this string to uniquely identify a termination on a specific ONT.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..25)

zhoneCpeVoipReleaseTimer		1.3.6.1.4.1.5504.5.16.1.2.2.1.18
This attribute contains a release timer defined in seconds. The value 0 specifies that the ONT is to use its internal default. The default value of this 45 attribute is 10 seconds.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..255

zhoneCpeVoipRohTimer		1.3.6.1.4.1.5504.5.16.1.2.2.1.19
This attribute defines the time in seconds for the receiver off hook condition before ROH tone is applied. The value 0 disables ROH timing. The default value is 15 seconds.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..255

zhoneCpeVoipDscpMark		1.3.6.1.4.1.5504.5.16.1.2.2.1.20
Diffserv code point to be used for outgoing RTP packets for this profile. The default value is expedited forwarding (EF) = 0x2E.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..255

zhoneCpeVoipPiggyBackEvents		1.3.6.1.4.1.5504.5.16.1.2.2.1.21
Enables or disables RTP piggyback events.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeVoipOobToneEvents		1.3.6.1.4.1.5504.5.16.1.2.2.1.22
Enables or disables handling of tones via RTP tone events per RFC 4733.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeVoipOobDtmfEvents		1.3.6.1.4.1.5504.5.16.1.2.2.1.23
Enables or disables handling of DTMF via RTP DTMF events per RFC 4733.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeVoipOobCasEvents		1.3.6.1.4.1.5504.5.16.1.2.2.1.24
Enables or disables handling of CAS via RTP CAS events per RFC 4733.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeVoipPartialDialTimeout		1.3.6.1.4.1.5504.5.16.1.2.2.1.25
This attribute defines the partial dial timeout for digit map processing in milliseconds. The default value is 16000 ms.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

zhoneCpeVoipCriticalDialTimeout		1.3.6.1.4.1.5504.5.16.1.2.2.1.26
This attribute defines the critical dial timeout for digit map processing in milliseconds. The default value is 4000 ms.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

zhoneCpeVoipServerOutboundServer		1.3.6.1.4.1.5504.5.16.1.2.2.1.27
This attribute contains the name (IP address or resolved name) of the outbound proxy server for SIP signalling messages.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress

zhoneCpeVoipServerPortId		1.3.6.1.4.1.5504.5.16.1.2.2.1.28
This attribute specifies the TCP/UDP port number of the VoIP protocol. The default value -1 select the default port number for the VoIP protocol. It is 2944 for H.248 and 5060 for SIP.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	-1..32767

zhoneCpeVoipDtmfEventsPassingMethod		1.3.6.1.4.1.5504.5.16.1.2.2.1.29
If zhoneCpeVoipOobDtmfEvents is disabled, dtmp digits are carried along the voice path. If zhoneCpeVoipOobDtmfEvents = enabled, we look at the dtmf-events-passing-method. If zhoneCpeVoipDtmfEventsPassingMethod = rfc4733, dtmf digits are carried in the RTP payload. If zhoneCpeVoipDtmfEventsPassingMethod = sip-info, dtmf digits are carried along the signalling path in the INFO messages.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	rfc4733(1), sipinfo(2)

zhoneCpeVoipCasEventsPassingMethod		1.3.6.1.4.1.5504.5.16.1.2.2.1.30
If zhoneCpeVoipOobCasEvents is disabled, dtmp digits are carried along the voice path. If zhoneCpeVoipOobCasEvents = enabled, we look at the dtmf-events-passing-method. If zhoneCpeVoipCasEventsPassingMethod = rfc4733, dtmf digits are carried in the RTP payload. If zhoneCpeVoipCasEventsPassingMethod = sip-info, dtmf digits are carried along the signalling path in the INFO messages.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	rfc4733(1), sipinfo(2)

zhoneCpeVoipRtpDscp		1.3.6.1.4.1.5504.5.16.1.2.2.1.31
This parameter indicates DSCP value for cpe voip rtp traffic. Valid code values: <0-63> Differentiated services codepoint value af11 Mark packets with AF11 dscp (001010) af12 Mark packets with AF12 dscp (001100) af13 Mark packets with AF13 dscp (001110) af21 Mark packets with AF21 dscp (010010) af22 Mark packets with AF22 dscp (010100) af23 Mark packets with AF23 dscp (010110) af31 Mark packets with AF31 dscp (011010) af32 Mark packets with AF32 dscp (011100) af33 Mark packets with AF33 dscp (011110) af41 Mark packets with AF41 dscp (100010) af42 Mark packets with AF42 dscp (100100) af43 Mark packets with AF43 dscp (100110) cs1 Mark packets with CS1(precedence 1) dscp (001000) cs2 Mark packets with CS2(precedence 2) dscp (010000) cs3 Mark packets with CS3(precedence 3) dscp (011000) cs4 Mark packets with CS4(precedence 4) dscp (100000) cs5 Mark packets with CS5(precedence 5) dscp (101000) cs6 Mark packets with CS6(precedence 6) dscp (110000) cs7 Mark packets with CS7(precedence 7) dscp (111000) default Mark packets with default dscp (000000) ef Mark packets with EF dscp (101110)
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(1..8)

zhoneCpeVoipSignalingDscp		1.3.6.1.4.1.5504.5.16.1.2.2.1.32
This parameter indicates DSCP value for cpe voip signaling traffic. Valid code values: <0-63> Differentiated services codepoint value af11 Mark packets with AF11 dscp (001010) af12 Mark packets with AF12 dscp (001100) af13 Mark packets with AF13 dscp (001110) af21 Mark packets with AF21 dscp (010010) af22 Mark packets with AF22 dscp (010100) af23 Mark packets with AF23 dscp (010110) af31 Mark packets with AF31 dscp (011010) af32 Mark packets with AF32 dscp (011100) af33 Mark packets with AF33 dscp (011110) af41 Mark packets with AF41 dscp (100010) af42 Mark packets with AF42 dscp (100100) af43 Mark packets with AF43 dscp (100110) cs1 Mark packets with CS1(precedence 1) dscp (001000) cs2 Mark packets with CS2(precedence 2) dscp (010000) cs3 Mark packets with CS3(precedence 3) dscp (011000) cs4 Mark packets with CS4(precedence 4) dscp (100000) cs5 Mark packets with CS5(precedence 5) dscp (101000) cs6 Mark packets with CS6(precedence 6) dscp (110000) cs7 Mark packets with CS7(precedence 7) dscp (111000) default Mark packets with default dscp (000000) ef Mark packets with EF dscp (101110)
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(1..8)

zhoneCpeVoipSipRegRetryTime		1.3.6.1.4.1.5504.5.16.1.2.2.1.33
Sip Reg Retry Time specifies the SIP registration retry time in seconds. The default value is 60 seconds.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeVoipMgcpClientAddressMode		1.3.6.1.4.1.5504.5.16.1.2.2.1.34
Ip and IpBracketed will cause the MGCP Client name to be the bound voice host IP address. Domain Name will allow the user to input any text string, usally a Domain Name.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	ip(1), ipBracketed(2), domainName(3)

zhoneCpeVoipMgcpPersistentNotify		1.3.6.1.4.1.5504.5.16.1.2.2.1.35
When enabled, all switchhook events will be forwarded to the switch immediately without regards to what the switch has requested. When disabled, the event that the switch has requested will be forwarded.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeIpTable		1.3.6.1.4.1.5504.5.16.1.3
Cpe Ip table for the VoIP feature.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeIpEntry

zhoneCpeIpEntry		1.3.6.1.4.1.5504.5.16.1.3.1
Row in the CpeIp table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeIpEntry

zhoneCpeIfIndex		1.3.6.1.4.1.5504.5.16.1.3.1.1
This represents the CPE Ip index value.
Status: current	Access: not-accessible
OBJECT-TYPE
	InterfaceIndex

zhoneCpeIpServiceType		1.3.6.1.4.1.5504.5.16.1.3.1.2
This represents the CPE Ip service types.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	voip(1), pwe(2), wifi(3)

zhoneCpeIpRowStatus		1.3.6.1.4.1.5504.5.16.1.3.1.3
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpeHostIp		1.3.6.1.4.1.5504.5.16.1.3.1.4
The address used for IP host services, this attribute has default value 0.0.0.0.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zhoneCpeIpServerProfileIndex		1.3.6.1.4.1.5504.5.16.1.3.1.5
This attribute points to the cpe-ip-server profile associated with this host IP. When cpe-ip profile is missing, use the default cpe-ip-server profile with DHCP enabled.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..2147483647

zhoneCpeIpServer		1.3.6.1.4.1.5504.5.16.1.4
Cpe Ip Server for the VoIP feature.
Status: current	Access: read-create
OBJECT-IDENTITY

zhoneCpeIpServerIndexNext		1.3.6.1.4.1.5504.5.16.1.4.2
This object contains an appropriate value to be used for the zhoneCpeIpServerIndex when creating entries in the zhoneCpeIpServerTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeIpServerIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zhoneCpeIpServerTable		1.3.6.1.4.1.5504.5.16.1.4.3
Cpe Ip Server table for the VoIP feature.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeIpServerEntry

zhoneCpeIpServerEntry		1.3.6.1.4.1.5504.5.16.1.4.3.1
Row in the CpeIpServer table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeIpServerEntry

zhoneCpeIpServerIndex		1.3.6.1.4.1.5504.5.16.1.4.3.1.1
This represents the CPE Ip server index value.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeIpServerRowStatus		1.3.6.1.4.1.5504.5.16.1.4.3.1.2
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpeIpServerProfileName		1.3.6.1.4.1.5504.5.16.1.4.3.1.3
CPE Ip server profile for the VoIP services for the dynamic bridging. This field is only writable upon creation and must be unique within its table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminString

zhoneCpeIpServerHostIpOption		1.3.6.1.4.1.5504.5.16.1.4.3.1.4
This attribute selects an IP related option.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	dhcp(1), static(2)

zhoneCpeIpServerNetmask		1.3.6.1.4.1.5504.5.16.1.4.3.1.5
The subnet mask for IP host services.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zhoneCpeIpServerGateway		1.3.6.1.4.1.5504.5.16.1.4.3.1.6
The default gateway address used for IP host services, this attribute has the default value 0.0.0.0.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zhoneCpeIpServerPrimaryDns		1.3.6.1.4.1.5504.5.16.1.4.3.1.7
This attribute specifies the primary DNS IP address. If this value is 0.0.0.0, no primary SIP DNS is defined. The default value is 0.0.0.0
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zhoneCpeIpServerSecondaryDns		1.3.6.1.4.1.5504.5.16.1.4.3.1.8
This attribute specifies the secondary DNS IP address. If this value is 0.0.0.0, no secondary SIP DNS is defined. The default value is 0.0.0.0.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zhoneCpeIpServerFirewallAccess		1.3.6.1.4.1.5504.5.16.1.4.3.1.9
Lists the protocols allowed on this interface. The firewall option must be enabled before these settings will take effect.
Status: current	Access: read-create
OBJECT-TYPE
	BITS	http(0), ping(1), snmp(2), snmptrap(3), ssh(4), telnet(5)

zhoneCpeIpServerNat		1.3.6.1.4.1.5504.5.16.1.4.3.1.10
When it is enabled, NAT/NAPT function is performed to translate between the public IP address and the private addresses. It is only supported on a WAN interface.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	nat(1), napt(2), disabled(3)

zhoneCpeIpServerSecureForward		1.3.6.1.4.1.5504.5.16.1.4.3.1.11
When this mode is enabled, packets are not flooded to all ports. Instead, all packets are forwarded to the port that is designated as the uplink port. In this mode, users are prevented from directly communicating with each other, and broadcast frames are discarded.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeIpServerIgmpFunction		1.3.6.1.4.1.5504.5.16.1.4.3.1.12
Enable an Igmp snooping function.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	none(1), snooping(2), proxy(3), snoopingproxy(4)

zhoneCpeIpServerDefaultIface		1.3.6.1.4.1.5504.5.16.1.4.3.1.13
When true, an internally generated packet (e.g., from SNMP trap, SNTP, etc.) is sent out through this interface if the destination IP address is not defined in the route table.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

zhoneCpeIpServerDnsSrc		1.3.6.1.4.1.5504.5.16.1.4.3.1.14
When true, the Interface is used by the DHCP Client to obtain DNS information.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

zhoneCpeIpServerDnsType		1.3.6.1.4.1.5504.5.16.1.4.3.1.15
Default - Get the DNS information from the WAN interface Static - The DNS information is manually provisioned Proxy - Enable interface to act as a proxy for DNS requests
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	default(1), static(2), proxy(3)

zhoneCpeVoipFeatures		1.3.6.1.4.1.5504.5.16.1.5
Cpe Voip Features for the VoIP feature.
Status: current	Access: read-write
OBJECT-IDENTITY

zhoneCpeVoipFeaturesIndexNext		1.3.6.1.4.1.5504.5.16.1.5.1
This object contains an appropriate value to be used for the zhoneCpeVoipFeaturesIndex when creating entries in the zhoneCpeVoipFeaturesTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeVoipFeaturesIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zhoneCpeVoipFeaturesTable		1.3.6.1.4.1.5504.5.16.1.5.2
Cpe Voip Features table for the VoIP feature.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeVoipFeaturesEntry

zhoneCpeVoipFeaturesEntry		1.3.6.1.4.1.5504.5.16.1.5.2.1
Row in the CpeVoipFeatures table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeVoipFeaturesEntry

zhoneCpeVoipFeaturesIndex		1.3.6.1.4.1.5504.5.16.1.5.2.1.1
This represents the CPE Voip Features index value.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeVoipFeaturesRowStatus		1.3.6.1.4.1.5504.5.16.1.5.2.1.2
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpeVoipFeaturesProfileName		1.3.6.1.4.1.5504.5.16.1.5.2.1.3
CPE Voip Media profile for the dynamic bridging VoIP services. This field is only writable upon creation and must be unique within its table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminString

zhoneCpeVoipFeaturesAnnouncementType		1.3.6.1.4.1.5504.5.16.1.5.2.1.4
This attribute specifies the treatment when a subscriber goes off hook but does not attempt a call.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	silence(1), reordertone(2), fastbusy(3), voice(4), notapplicable(5)

zhoneCpeVoipCidFeatures		1.3.6.1.4.1.5504.5.16.1.5.2.1.5
This attribute contains a bit map of caller ID features. By default all the bits are set.
Status: current	Access: read-create
OBJECT-TYPE
	BITS	callingnumber(0), callingname(1), cidblocking(2), cidnumber(3), cidname(4), anonymouscidblocking(5)

zhoneCpeVoipCallWaitingFeatures		1.3.6.1.4.1.5504.5.16.1.5.2.1.6
This attribute contains a bit map of call waiting features. By default all the bits are set.
Status: current	Access: read-create
OBJECT-TYPE
	BITS	callwaiting(0), cidannouncement(1)

zhoneCpeVoipCallProgressOrTransferFeatures		1.3.6.1.4.1.5504.5.16.1.5.2.1.7
This attribute is a bit map of call processing features. By default all the bits are set.
Status: current	Access: read-create
OBJECT-TYPE
	BITS	threeway(0), calltransfer(1), callhold(2), callpark(3), donotdisturb(4), flashonemergency(5), emergencyhold(6), sixway(7)

zhoneCpeVoipCallPresentationFeatures		1.3.6.1.4.1.5504.5.16.1.5.2.1.8
This attribute is a bit map of call presentation features. By default all the bits are set.
Status: current	Access: read-create
OBJECT-TYPE
	BITS	msgwaitsplashring(0), msgwaitspecialdialtone(1), msgwaitvisual(2), callfwd(3)

zhoneCpeVoipFeaturesHotLine		1.3.6.1.4.1.5504.5.16.1.5.2.1.9
When the hotline is hot, the phone will immediately dial the Hotline number. When the hotline is warm, the phone wait for the period specified in warmline-timer in ms before automatically dial the hotline number.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	disabled(1), hot(2), warm(3)

zhoneCpeVoipFeaturesHotLineNumber		1.3.6.1.4.1.5504.5.16.1.5.2.1.10
The number this phone will automatically dial, if hotline or warmline feature is enabled.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..127)

zhoneCpeVoipFeaturesWarmLineTimer		1.3.6.1.4.1.5504.5.16.1.5.2.1.11
The wait period before a warmline automcatically dial the hotline number.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	200..30000

zhoneCpeVoipMedia		1.3.6.1.4.1.5504.5.16.1.6
Cpe Voip Media for the VoIP feature.
Status: current	Access: read-create
OBJECT-IDENTITY

zhoneCpeVoipMediaIndexNext		1.3.6.1.4.1.5504.5.16.1.6.1
This object contains an appropriate value to be used for the zhoneCpeVoipMediaIndex when creating entries in the zhoneCpeVoipMediaTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeVoipMediaIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zhoneCpeVoipMediaTable		1.3.6.1.4.1.5504.5.16.1.6.2
Cpe Voip Media table for the VoIP feature.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeVoipMediaEntry

zhoneCpeVoipMediaEntry		1.3.6.1.4.1.5504.5.16.1.6.2.1
Row in the CpeVoipMedia table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeVoipMediaEntry

zhoneCpeVoipMediaIndex		1.3.6.1.4.1.5504.5.16.1.6.2.1.1
This represents the CPE Voip Media index value.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeVoipMediaRowStatus		1.3.6.1.4.1.5504.5.16.1.6.2.1.2
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpeVoipMediaProfileName		1.3.6.1.4.1.5504.5.16.1.6.2.1.3
CPE Voip Media profile for the dynamic bridging VoIP services. This field is only writable upon creation and must be unique within its table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminString

zhoneCpeVoipMediaEchoCancel		1.3.6.1.4.1.5504.5.16.1.6.2.1.4
This attribute turns on and off echo cancellation.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeVoipFaxMode		1.3.6.1.4.1.5504.5.16.1.6.2.1.5
This attribute selects the fax mode.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	passthrough(1), t38(2)

zhoneCpeVoipCodecSelectionFirstOrder		1.3.6.1.4.1.5504.5.16.1.6.2.1.6
This attribute specifies codec selection as defined by RFC 3551.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	pcmu(1), gsm(2), g723(3), dvi4eightKHz(4), dvi4sixteenKHz(5), lpc(6), pcma(7), g722(8), l16twochannels(9), l16onechannel(10), qcelp(11), cn(12), mpa(13), g728(14), dvi411(15), dvi422(16), g729(17)

zhoneCpeVoipPacketPeriodSelectionFirstOrder		1.3.6.1.4.1.5504.5.16.1.6.2.1.7
This attribute specifies the packet period selection interval in milliseconds. The default value is 10. Valid values are 10..30 ms.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	10..30

zhoneCpeVoipSilenceSuppressionFirstOrder		1.3.6.1.4.1.5504.5.16.1.6.2.1.8
This attribute specifies whether silence suppression is on or off.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeVoipCodecSelectionSecondOrder		1.3.6.1.4.1.5504.5.16.1.6.2.1.9
This attribute specifies codec selection as defined by RFC 3551.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	pcmu(1), gsm(2), g723(3), dvi4eightKHz(4), dvi4sixteenKHz(5), lpc(6), pcma(7), g722(8), l16twochannels(9), l16onechannel(10), qcelp(11), cn(12), mpa(13), g728(14), dvi411(15), dvi422(16), g729(17)

zhoneCpeVoipPacketPeriodSelectionSecondOrder		1.3.6.1.4.1.5504.5.16.1.6.2.1.10
This attribute specifies the packet period selection interval in milliseconds. The default value is 10. Valid values are 10..30 ms.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	10..30

zhoneCpeVoipSilenceSuppressionSecondOrder		1.3.6.1.4.1.5504.5.16.1.6.2.1.11
This attribute specifies whether silence suppression is on or off.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeVoipCodecSelectionThirdOrder		1.3.6.1.4.1.5504.5.16.1.6.2.1.12
This attribute specifies codec selection as defined by RFC 3551.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	pcmu(1), gsm(2), g723(3), dvi4eightKHz(4), dvi4sixteenKHz(5), lpc(6), pcma(7), g722(8), l16twochannels(9), l16onechannel(10), qcelp(11), cn(12), mpa(13), g728(14), dvi411(15), dvi422(16), g729(17)

zhoneCpeVoipPacketPeriodSelectionThirdOrder		1.3.6.1.4.1.5504.5.16.1.6.2.1.13
This attribute specifies the packet period selection interval in milliseconds. The default value is 10. Valid values are 10..30 ms.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	10..30

zhoneCpeVoipSilenceSuppressionThirdOrder		1.3.6.1.4.1.5504.5.16.1.6.2.1.14
This attribute specifies whether silence suppression is on or off.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeVoipCodecSelectionFourthOrder		1.3.6.1.4.1.5504.5.16.1.6.2.1.15
This attribute specifies codec selection as defined by RFC 3551.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	pcmu(1), gsm(2), g723(3), dvi4eightKHz(4), dvi4sixteenKHz(5), lpc(6), pcma(7), g722(8), l16twochannels(9), l16onechannel(10), qcelp(11), cn(12), mpa(13), g728(14), dvi411(15), dvi422(16), g729(17)

zhoneCpeVoipPacketPeriodSelectionFourthOrder		1.3.6.1.4.1.5504.5.16.1.6.2.1.16
This attribute specifies the packet period selection interval in milliseconds. The default value is 10. Valid values are 10..30 ms.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	10..30

zhoneCpeVoipSilenceSuppressionFourthOrder		1.3.6.1.4.1.5504.5.16.1.6.2.1.17
This attribute specifies whether silence suppression is on or off.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeVoipSubscriberTable		1.3.6.1.4.1.5504.5.16.1.7
Cpe Voip Subscriber table for the VoIP feature.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeVoipSubscriberEntry

zhoneCpeVoipSubscriberEntry		1.3.6.1.4.1.5504.5.16.1.7.1
Row in the CpeVoipSubscriber table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeVoipSubscriberEntry

zhoneCpeVoipSubscriberPortNumber		1.3.6.1.4.1.5504.5.16.1.7.1.1
This represents the CPE Voip Subscriber Port Number.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeVoipSubscriberRowStatus		1.3.6.1.4.1.5504.5.16.1.7.1.2
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpeVoipSubscriberAdminState		1.3.6.1.4.1.5504.5.16.1.7.1.3
This shows the admin state for the CpeVoipSubscriber.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminState

zhoneCpeVoipSubscriberDialNumber		1.3.6.1.4.1.5504.5.16.1.7.1.4
This attribute contains the dialing number to make the call.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminString

zhoneCpeVoipSubscriberDisplayName		1.3.6.1.4.1.5504.5.16.1.7.1.5
This ASCII string attribute defines the customer id used for the display attribute in outgoing SIP messages.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..25)

zhoneCpeVoipSubscriberUserName		1.3.6.1.4.1.5504.5.16.1.7.1.6
This attribute contains the SIP user identification used for authentication.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(1..50)

zhoneCpeVoipSubscriberPassword		1.3.6.1.4.1.5504.5.16.1.7.1.7
This attribute contains the SIP password used for authentication.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(1..32)

zhoneCpeVoipSubscriberImpedance		1.3.6.1.4.1.5504.5.16.1.7.1.8
This attribute specifies the impedance for the POTS UNI.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	ohm600(1), ohm900(2), complex1(3), complex2(4), complex3(5)

zhoneCpeVoipSubscriberRxGain		1.3.6.1.4.1.5504.5.16.1.7.1.9
This attribute specifies a gain value for the received signal in the form of a 2s complement number. Valid values are -120 (-12.0 dB) to 60 (+6.0 dB).
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	-12..6

zhoneCpeVoipSubscriberTxGain		1.3.6.1.4.1.5504.5.16.1.7.1.10
This attribute specifies a gain value for the transmit signal in the form of a 2s complement number. Valid values are -120 (-12.0 dB) to 60 (+6.0 dB).
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	-12..6

zhoneCpeVoipSubscriberTransmissionPath		1.3.6.1.4.1.5504.5.16.1.7.1.11
This attribute allows setting the POTS UNI either to full-time on-hook transmission or part-time on-hook transmission.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	fulltimeonhookxmit(1), parttimeonhookxmit(2)

zhoneCpeVoipSubscriberSignallingCode		1.3.6.1.4.1.5504.5.16.1.7.1.12
This attribute specifies the POTS-side signaling.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	loopstart(1), groundstart(2), loopreversebattery(3), coinfirst(4), dialtonefirst(5), multiparty(6)

zhoneCpeVoipServerProfileIndex		1.3.6.1.4.1.5504.5.16.1.7.1.13
This attribute points to the associated cpe-voip-server profile.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeVoipFeaturesProfileIndex		1.3.6.1.4.1.5504.5.16.1.7.1.14
This attribute points to the associated cpe-voip-feature profile.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeVoipMediaProfileIndex		1.3.6.1.4.1.5504.5.16.1.7.1.15
This attribute points to the associated cpe-voip-media profile.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeVoipSubscriberPhoneFollowsWan		1.3.6.1.4.1.5504.5.16.1.7.1.16
When enabled the phone will lose power any time the WAN is operation status of down.This will allow line monitoring equipment to detect loss of service.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeEthSubscriberTable		1.3.6.1.4.1.5504.5.16.1.8
Cpe Eth Subscriber table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeEthSubscriberEntry

zhoneCpeEthSubscriberEntry		1.3.6.1.4.1.5504.5.16.1.8.1
Row in the CpeEthSubscriber table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeEthSubscriberEntry

zhoneCpeEthSubscriberPortNumber		1.3.6.1.4.1.5504.5.16.1.8.1.1
This represents the CPE Eth Subscriber Port Number.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeEthSubscriberRowStatus		1.3.6.1.4.1.5504.5.16.1.8.1.2
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpeEthSubscriberAdminState		1.3.6.1.4.1.5504.5.16.1.8.1.3
This attribute activates or deactivates the functions performed by the Ethernet port for this subscriber or put the port in test mode.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminState

zhoneCpeEthSubscriberLoopback		1.3.6.1.4.1.5504.5.16.1.8.1.4
This enables or disables Ethernet loopback.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeEthSubscriberRate		1.3.6.1.4.1.5504.5.16.1.8.1.5
This attribute sets the Ethernet port rate.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	auto(1), tenMbps(2), oneHundredMbps(3), oneThousandMbps(4)

zhoneCpeEthSubscriberDuplex		1.3.6.1.4.1.5504.5.16.1.8.1.6
This attribute sets the Ethernet port duplex.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	auto(1), full(2), half(3)

zhoneCpeEthSubscriberMtu		1.3.6.1.4.1.5504.5.16.1.8.1.7
This attribute denotes the maximum frame size allowed across this interface.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

zhoneCpeEthSubscriberPortType		1.3.6.1.4.1.5504.5.16.1.8.1.8
This attribute specifies the Ethernet interface wiring.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	dce(1), dte(2)

zhoneCpeEthSubscriberPauseTime		1.3.6.1.4.1.5504.5.16.1.8.1.9
This attribute allows the interface to ask the subscriber terminal to temporarily suspend sending data. Units are in pause quanta (1 pause quantum is 512 bit times of the particular implementation).
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

zhoneCpeEthSubscriberMode		1.3.6.1.4.1.5504.5.16.1.8.1.10
This attribute specifies whether the Ethernet interface is bridged or derived from an IP router function.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	bridged(1), routed(2)

zhoneCpeEthSubscriberPowerFeed		1.3.6.1.4.1.5504.5.16.1.8.1.11
This attribute controls whether power is provided to an external equipment over the Ethernet interface.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeVideoProfileIndex		1.3.6.1.4.1.5504.5.16.1.8.1.12
This object points to the associated video profile.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeTrafficManagementProfileIndex		1.3.6.1.4.1.5504.5.16.1.8.1.13
This object points to the associated Traffic Management profile. If there is no traffic control for the UNI, set it to 0.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeEthSubscriberLineStatusAlarm		1.3.6.1.4.1.5504.5.16.1.8.1.14
This field is for enabling/disabling alarm reporting from this CPE UNI.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeEthSubscriberAlarmSeverity		1.3.6.1.4.1.5504.5.16.1.8.1.15
This field is for specifying the severity level of all the alarms from this CPE UNI.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAlarmSeverity

zhoneCpeEthSubscriberPowerShed		1.3.6.1.4.1.5504.5.16.1.8.1.16
When zhoneCpeSystemCommonPowerShutdownDelay is non-zero and the unit is operating on Battery Power during an AC power outage, this option controls the Enable/Disable state of each Ethernet port. Ports with Power Shedding State as Enabled will remain operational on Battery Power, while Disabled ports will be shut down to conserve battery power.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeEthSubscriberPowerRange		1.3.6.1.4.1.5504.5.16.1.8.1.17
Maximum PoE ( Power over ethernet ) Power allowed per port. When disabled, no PoE Power will be provided.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	disabled(1), low(2), medium(3), high(4)

zhoneCpeEthSubscriberLldpMedList		1.3.6.1.4.1.5504.5.16.1.8.1.18
A list of cpe-lldp-med-policy profiles.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

zhoneCpeVideo		1.3.6.1.4.1.5504.5.16.1.9
Cpe Video objects.
Status: current	Access: read-create
OBJECT-IDENTITY

zhoneCpeVideoIndexNext		1.3.6.1.4.1.5504.5.16.1.9.1
This object contains an appropriate value to be used for the zhoneCpeVideoIndex when creating entries in the zhoneCpeVideoTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeVideoIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zhoneCpeVideoTable		1.3.6.1.4.1.5504.5.16.1.9.2
Cpe Video table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeVideoEntry

zhoneCpeVideoEntry		1.3.6.1.4.1.5504.5.16.1.9.2.1
Row in the Cpe Video table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeVideoEntry

zhoneCpeVideoIndex		1.3.6.1.4.1.5504.5.16.1.9.2.1.1
This represents the CPE Video Index.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeGemPort		1.3.6.1.4.1.5504.5.16.1.9.2.1.2
This represents the CPE GEM Port Index.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	0..4095

zhoneCpeVlan		1.3.6.1.4.1.5504.5.16.1.9.2.1.3
This represents the CPE Vlan Id.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	0..4095

zhoneCpeVideoRowStatus		1.3.6.1.4.1.5504.5.16.1.9.2.1.4
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpeVideoProfileName		1.3.6.1.4.1.5504.5.16.1.9.2.1.5
CPE Video profile for the dynamic bridging. This field is only writable upon creation and must be unique within its table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminString

zhoneCpeVideoMaxSimultaneousGroups		1.3.6.1.4.1.5504.5.16.1.9.2.1.6
This attribute specifies the maximum number of dynamic multicast groups that may be replicated to the client port at any one time. The default value 0 specifies that no administrative limit is to be imposed.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

zhoneCpeVideoMaxMulticastBandwidth		1.3.6.1.4.1.5504.5.16.1.9.2.1.7
This attribute specifies the maximum imputed dynamic bandwidth, in bytes per second, that may be delivered to the client port at anyone time. The default value 0 specifies that no administrative limit is to be imposed.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeVideoBandwidthEnforce		1.3.6.1.4.1.5504.5.16.1.9.2.1.8
The default value of this boolean attribute is false, and specifies that attempts to exceed the max multicast bandwidth be counted but honored. The value true specifies that such attempts be counted and denied. The imputed bandwidth value is taken from the dynamic access control list table, both for a new join request and for pre-existing groups.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

zhoneCpeVideoIgmpVersion		1.3.6.1.4.1.5504.5.16.1.9.2.1.9
This attribute specifies the version of the IGMP to be supported.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	version1(1), version2(2), version3(3)

zhoneCpeVideoIgmpFunction		1.3.6.1.4.1.5504.5.16.1.9.2.1.10
This attribute enables an IGMP function - transparent IGMP snooping only, snooping with proxy reporting (SPR) and IGMP proxy. The function must be consistent with the capabilities specified by the other IGMP configuration attributes.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	transparentsnooping(1), snoopwithproxy(2), proxy(3)

zhoneCpeVideoImmediateLeave		1.3.6.1.4.1.5504.5.16.1.9.2.1.11
This attribute enables or disables the immediate leave function.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeVideoUpstreamIgmpRate		1.3.6.1.4.1.5504.5.16.1.9.2.1.12
This attribute limits the maximum rate of upstream IGMP traffic. Traffic in excess of this limit is silently discarded. The attribute value is specified in messages/second. The default value 0 imposes no rate limit on this traffic.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeVideoRobustness		1.3.6.1.4.1.5504.5.16.1.9.2.1.13
This attribute allows tuning for possible packet loss in the network. The default value 0 causes the ONT to follow the IETF recommendation to copy the robustness value from query messages originating further upstream.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..255

zhoneCpeVideoAccessControlList		1.3.6.1.4.1.5504.5.16.1.9.2.1.14
This attribute points to a access control group list. The default value 0 indicates no control list is used.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeVideoAccessControl		1.3.6.1.4.1.5504.5.16.1.10
Cpe Video Access Control objects.
Status: current	Access: read-create
OBJECT-IDENTITY

zhoneCpeVideoAccessControlIndexTable		1.3.6.1.4.1.5504.5.16.1.10.1
Table of next available index values for CPE video access control profile.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeVideoAccessControlIndexEntry

zhoneCpeVideoAccessControlIndexEntry		1.3.6.1.4.1.5504.5.16.1.10.1.1
Row in the zhoneCpeVideoAccessControlIndexTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeVideoAccessControlIndexEntry

zhoneCpeVideoAccessControlIndexNext		1.3.6.1.4.1.5504.5.16.1.10.1.1.1
This represents the next available index value for video access control profile. When 30 cpe-video-access-control profiles are configured this field wil give zero as next available index.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeVideoAccessControlTable		1.3.6.1.4.1.5504.5.16.1.10.2
Cpe Video Access Control table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeVideoAccessControlEntry

zhoneCpeVideoAccessControlEntry		1.3.6.1.4.1.5504.5.16.1.10.2.1
Row in the Cpe Video Access Control table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeVideoAccessControlEntry

zhoneCpeVideoAccessControlListIndex		1.3.6.1.4.1.5504.5.16.1.10.2.1.1
This represents the CPE Video Access Control List Index.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeVideoAccessControlEntryIndex		1.3.6.1.4.1.5504.5.16.1.10.2.1.2
This represents the CPE Video Access Control Entry Index.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeVideoAccessControlRowStatus		1.3.6.1.4.1.5504.5.16.1.10.2.1.3
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpeVideoAccessControlProfileName		1.3.6.1.4.1.5504.5.16.1.10.2.1.4
CPE Video profile for the dynamic bridging. This field is only writable upon creation and must be unique within its table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminString

zhoneCpeVideoAccessControlType		1.3.6.1.4.1.5504.5.16.1.10.2.1.5
This attribute defines the video stream type.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	normal(1), alwayson(2), periodic(3)

zhoneCpeVideoAccessControlSrcIp		1.3.6.1.4.1.5504.5.16.1.10.2.1.6
This is the source IP address. Default value is 0.0.0.0, it specifies that the source IP address is to be ignored.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zhoneCpeVideoAccessControlDstIpStart		1.3.6.1.4.1.5504.5.16.1.10.2.1.7
Destination IP address of the start of the multicast range. Default value is 0.0.0.0.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zhoneCpeVideoAccessControlDstIpEnd		1.3.6.1.4.1.5504.5.16.1.10.2.1.8
Destination IP address of the end of the multicast range. Default value is 0.0.0.0.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zhoneCpeVideoAccessControlImputedGroupBw		1.3.6.1.4.1.5504.5.16.1.10.2.1.9
Expressed in bytes/sec, the imputed group bandwidth is used to decide whether or not to honor a join request in the presence of a max multicast bandwidth limit. The default value 0 effectively allows this table entry to avoid max bandwidth limitations.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpePweSubscriberTable		1.3.6.1.4.1.5504.5.16.1.11
Cpe Pwe Subscriber table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpePweSubscriberEntry

zhoneCpePweSubscriberEntry		1.3.6.1.4.1.5504.5.16.1.11.1
Row in the CpePweSubscriber table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpePweSubscriberEntry

zhoneCpePweSubscriberPortNumber		1.3.6.1.4.1.5504.5.16.1.11.1.1
This represents the CPE Pwe Subscriber Port Number.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpePweSubscriberRowStatus		1.3.6.1.4.1.5504.5.16.1.11.1.2
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpePweSubscriberAdminState		1.3.6.1.4.1.5504.5.16.1.11.1.3
This attribute activates or deactivates the functions performed by the CES port for this subscriber or puts the port in test mode.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminState

zhoneCpePweSubscriberLoopback		1.3.6.1.4.1.5504.5.16.1.11.1.4
This attribute specifies and reports the loopback configuration of the physical interface.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	noloop(1), payload(2), line(3), ponside(4), cesside(5)

zhoneCpePweSubscriberNearEndPort		1.3.6.1.4.1.5504.5.16.1.11.1.5
When the pseudowire service is transported via IP, this attribute specifies the port number of the near-end TCP/UDP service. The default value is 57000 + port number.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

zhoneCpePweSubscriberFarEndIp		1.3.6.1.4.1.5504.5.16.1.11.1.6
When the pseudowire service is transported via IP, this attribute specifies the IP or resolved name of the far-end termination point.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zhoneCpePweSubscriberFarEndPort		1.3.6.1.4.1.5504.5.16.1.11.1.7
When the pseudowire service is transported via IP, this attribute specifies the port number of the far-end TCP/UDP service. The default value is 57000 + port number.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

zhoneCpePweSubscriberLineLength		1.3.6.1.4.1.5504.5.16.1.11.1.8
This attribute specifies the length of the twisted pair cable from a DS1 physical UNI to the DSX-1 cross-connect point.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

zhoneCpePweProfileIndex		1.3.6.1.4.1.5504.5.16.1.11.1.9
This attribute points to the associated PWE profile. 1 indicates a default profile is used.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpePweSubscriberLineStatusAlarm		1.3.6.1.4.1.5504.5.16.1.11.1.10
This field is for enabling/disabling alarm reporting from this CPE UNI.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpePweSubscriberAlarmSeverity		1.3.6.1.4.1.5504.5.16.1.11.1.11
This field is for specifying the severity level of all the alarms from this CPE UNI.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAlarmSeverity

zhoneCpePwe		1.3.6.1.4.1.5504.5.16.1.12
Cpe Pwe objects.
Status: current	Access: read-create
OBJECT-IDENTITY

zhoneCpePweIndexNext		1.3.6.1.4.1.5504.5.16.1.12.1
This object contains an appropriate value to be used for the zhoneCpePweIndex when creating entries in the zhoneCpePweTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpePweIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zhoneCpePweTable		1.3.6.1.4.1.5504.5.16.1.12.2
Cpe Pwe table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpePweEntry

zhoneCpePweEntry		1.3.6.1.4.1.5504.5.16.1.12.2.1
Row in the CpePwe table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpePweEntry

zhoneCpePweIndex		1.3.6.1.4.1.5504.5.16.1.12.2.1.1
This represents the CPE Pwe Index.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpePweRowStatus		1.3.6.1.4.1.5504.5.16.1.12.2.1.2
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpePweProfileName		1.3.6.1.4.1.5504.5.16.1.12.2.1.3
CPE Pwe profile for the dynamic bridging. This field is only writable upon creation and must be unique within its table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminString

zhoneCpePweLineType		1.3.6.1.4.1.5504.5.16.1.12.2.1.4
This attribute specifies the line type (T1, E1 or other) used.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	ds1(1), e1(2), other(3)

zhoneCpePweEncoding		1.3.6.1.4.1.5504.5.16.1.12.2.1.5
This attribute specifies the line coding scheme.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	b8zs(1), ami(2), hdb3(3), b3zs(4)

zhoneCpePweDs1Mode		1.3.6.1.4.1.5504.5.16.1.12.2.1.6
This attribute specifies the mode of a DS1.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	shorthaulnopwr(1), longhaulnopwr(2), niulonghaulnopwr(3), niulonghaulpwr(4)

zhoneCpePweDs1Framing		1.3.6.1.4.1.5504.5.16.1.12.2.1.7
This attribute specifies the DS1 framing structure.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	extsuperframe(1), superframe(2), unframed(3), g704(4), jtg704(5)

zhoneCpePweTransport		1.3.6.1.4.1.5504.5.16.1.12.2.1.8
The underlying transport for the Pseudowire service.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	ethernet(1), udp(2), mpls(3)

zhoneCpePweServiceType		1.3.6.1.4.1.5504.5.16.1.12.2.1.9
This attribute specifies the basic service type, either a transparent bit pipe or an encapsulation that recognizes the underlying structure of the payload.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	unstructured(1), octetalignedunstruct(2), structured(3)

zhoneCpePweSignalling		1.3.6.1.4.1.5504.5.16.1.12.2.1.10
This attribute specifies how CAS signalling is carried.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	nosignalling(1), inbandcas(2), outofbandcas(3)

zhoneCpePwePayloadSize		1.3.6.1.4.1.5504.5.16.1.12.2.1.11
Number of payload bytes per packet. Valid only if service type = unstructured or unstructured octet-aligned. Valid choices depend on the TDM service, but must include the following. Other choices are at the vendor's discretion. DS1 192 DS1 200, required only if unstructured octet aligned service is supported E1 256 DS3 1024 E3 1024
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

zhoneCpePwePayloadEncapsulationDelay		1.3.6.1.4.1.5504.5.16.1.12.2.1.12
This represents number of 125 microsecond frames to be encapsulated in each pseudowire packet. Valid only if service type = structured. The minimum set of choices for various TDM services is listed below, and is affected by the possible presence of in-band signalling. Other choices are at the vendor discretion. NxDS0, no signalling, N = 1 64 (8 ms) required, 40 (5 ms) desired NxDS0, no signalling, N = 2..4 32 (4 ms) NxDS0, no signalling, N > 4 8 (1 ms) NxDS0 with DS1 CAS 24 (3 ms) NxDS0 with E1 CAS 16 (2 ms)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	nosignallingandNvalueis1(1), nosignallingandNvalueis2to4(2), nosignallingandNvalueisgreaterthan4(3), ds1cas(4), e1cas(5)

zhoneCpePweTimingMode		1.3.6.1.4.1.5504.5.16.1.12.2.1.13
This attribute selects the timing mode of the TDM service. If RTP is used, this attribute must be set to be consistent with the value of the RTP time stamp mode attribute in the RTP parameters managed entity at the far end. 1 Network timing 2 Differential timing 3 Adaptive timing (default) 4 Loop timing: local TDM transmit clock derived from local TDM receive stream
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	network(1), differential(2), adaptive(3), loop(4)

zhoneCpePweChannelAssign		1.3.6.1.4.1.5504.5.16.1.12.2.1.14
If service type is structured, this attribute is a bit field indicating the 64kbps sub channels are used. This is not supported currently. The default value is channel0, but it might change later.
Status: current	Access: read-create
OBJECT-TYPE
	BITS	channel0(0), channel1(1), channel2(2), channel3(3), channel4(4), channel5(5), channel6(6), channel7(7), channel8(8), channel9(9), channel10(10), channel11(11), channel12(12), channel13(13), channel14(14), channel15(15), channel16(16), channel17(17), channel18(18), channel19(19), channel20(20), channel21(21), channel22(22), channel23(23), channel24(24), channel25(25), channel26(26), channel27(27), channel28(28), channel29(29), channel30(30), channel31(31)

zhoneCpePweClockReference		1.3.6.1.4.1.5504.5.16.1.12.2.1.15
This attribute specifies the frequency of the common timing reference, in multiples of 8 kHz. The default value is 1 (8 kHz).
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..65535

zhoneCpePweRtpTimeStampMode		1.3.6.1.4.1.5504.5.16.1.12.2.1.16
This attribute determines the mode in which RTP timestamps are generated in the TDM to PSN direction.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	unknown(1), absolute(2), differential(3)

zhoneCpePwePtypePayload		1.3.6.1.4.1.5504.5.16.1.12.2.1.17
This attribute specifies the RTP payload type for the payload channel in the TDM to PSN direction. Assignable PTYPEs lie in the dynamic range 96..127.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	96..127

zhoneCpePwePtypeSignalling		1.3.6.1.4.1.5504.5.16.1.12.2.1.18
This attribute specifies the RTP payload type direction for the signaling channel in the TDM to PSN. Assignable PTYPEs lie in the dynamic range 96..127. If signalling is not transported in its own channel, the value should be set to 0. So the valid values used are 0, 96-127.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..127

zhoneCpePweSSrcPayload		1.3.6.1.4.1.5504.5.16.1.12.2.1.19
This attribute specifies the RTP synchronization source for the payload channel in the TDM to PSN direction.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpePweSSrcSignalling		1.3.6.1.4.1.5504.5.16.1.12.2.1.20
This attribute specifies the RTP synchronization source for the signaling channel in the TDM to PSN direction. If signalling is not transported in its own channel, this value should be set to 0.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpePweExpectedPTypePayload		1.3.6.1.4.1.5504.5.16.1.12.2.1.21
This attribute specifies the RTP payload type for the payload channel in the PSN to TDM direction. The received payload type may be used to detect malformed packets. To disable the check functions, set the value to its default value 0.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..255

zhoneCpePweExpectedPTypeSignalling		1.3.6.1.4.1.5504.5.16.1.12.2.1.22
This attribute specifies the RTP payload type for the signaling channel in the PSN to TDM direction. The received payload type may be used to detect malformed packets. To disable the check functions, set the value to its default value 0.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..255

zhoneCpePweExpectedSSrcPayload		1.3.6.1.4.1.5504.5.16.1.12.2.1.23
This attribute specifies the RTP synchronization source in the PSN to TDM direction. The received SSRC may be used to detect misconnection (stray packets). To disable the check functions, set the value to its default value 0.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpePweExpectedSSrcSignalling		1.3.6.1.4.1.5504.5.16.1.12.2.1.24
This attribute specifies the RTP synchronization source for the signalling channel in the PSN to TDM direction. The received SSRC may be used to detect misconnection (stray packets). To disable the check functions, set the value to its default value 0.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpePweJitterBufMax		1.3.6.1.4.1.5504.5.16.1.12.2.1.25
This attribute specifies the desired maximum depth of the playout buffer in the PSN to TDM direction. The value is expressed as a multiple of the 125 micro second frame rate. The value 0 selects the ONT's internal policy.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

zhoneCpePweJitterBufDesired		1.3.6.1.4.1.5504.5.16.1.12.2.1.26
This attribute specifies the desired nominal fill depth of the playout buffer in the PSN to TDM direction. The value is expressed as a multiple of the 125 micro second frame rate. The value 0 selects the ONT's internal policy.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

zhoneCpePweFillPolicy		1.3.6.1.4.1.5504.5.16.1.12.2.1.27
This attribute defines the payload bit pattern to be applied toward the TDM service if no payload packet is available to play out. The default value 1 specifies that the ONT apply its internal policy, ie vendor-specific.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	vendorspecific(1), ais(2), allones(3), allzeros(4), repeatprevdata(5), ds1idle(6)

zhoneCpePweMisconnectedDeclarePolicy		1.3.6.1.4.1.5504.5.16.1.12.2.1.28
The alarm declaration policy attribute defines the anomaly rate that causes the corresponding alarm to be declared. It is an integer percentage between 1..100. If this density of anomalies occurs during the alarm onset soak interval, the alarm is declared. The default value 0 selects the ONT's internal policy.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..100

zhoneCpePweMisconnectedClearPolicy		1.3.6.1.4.1.5504.5.16.1.12.2.1.29
The alarm clear policy attribute defines the anomaly rate that causes the correcponding alarm to be cleared. It is an integer percentage between 0..99. If no more than this density of anomalies occurs during the alarm clear soak interval, the alarm is cleared. The default value 255 selects the ONT's internal policy.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..255

zhoneCpePweLossPacketDeclarePolicy		1.3.6.1.4.1.5504.5.16.1.12.2.1.30
The alarm declaration policy attribute defines the anomaly rate that causes the corresponding alarm to be declared. It is an integer percentage between 1..100. If this density of anomalies occurs during the alarm onset soak interval, the alarm is declared. The default value 0 selects the ONT's internal policy.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..100

zhoneCpePweLossPacketClearPolicy		1.3.6.1.4.1.5504.5.16.1.12.2.1.31
The alarm clear policy attribute defines the anomaly rate that causes the correcponding alarm to be cleared. It is an integer percentage between 0..99. If no more than this density of anomalies occurs during the alarm clear soak interval, the alarm is cleared. The default value 255 selects the ONT's internal policy.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..255

zhoneCpePweOverrunUnderrunDeclarePolicy		1.3.6.1.4.1.5504.5.16.1.12.2.1.32
The alarm declaration policy attribute defines the anomaly rate that causes the corresponding alarm to be declared. It is an integer percentage between 1..100. If this density of anomalies occurs during the alarm onset soak interval, the alarm is declared. The default value 0 selects the ONT's internal policy.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..100

zhoneCpePweOverrunUnderrunClearPolicy		1.3.6.1.4.1.5504.5.16.1.12.2.1.33
The alarm clear policy attribute defines the anomaly rate that causes the correcponding alarm to be cleared. It is an integer percentage between 0..99. If no more than this density of anomalies occurs during the alarm clear soak interval, the alarm is cleared. The default value 255 selects the ONT's internal policy.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..255

zhoneCpePweMalformedDeclarePolicy		1.3.6.1.4.1.5504.5.16.1.12.2.1.34
The alarm declaration policy attribute defines the anomaly rate that causes the corresponding alarm to be declared. It is an integer percentage between 1..100. If this density of anomalies occurs during the alarm onset soak interval, the alarm is declared. The default value 0 selects the ONT's internal policy.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..100

zhoneCpePweMalformedClearPolicy		1.3.6.1.4.1.5504.5.16.1.12.2.1.35
The alarm clear policy attribute defines the anomaly rate that causes the correcponding alarm to be cleared. It is an integer percentage between 0..99. If no more than this density of anomalies occurs during the alarm clear soak interval, the alarm is cleared. The default value 255 selects the ONT's internal policy.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..255

zhoneCpePweRBitTransmitSetPolicy		1.3.6.1.4.1.5504.5.16.1.12.2.1.36
This attribute defines the number of consecutive lost packets that causes the transmitted R bit to be set in the TDM to PSN direction, indicating lost packets to the far end. The default value 0 selects the ONT internal policy.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..255

zhoneCpePweRBitTransmitClearPolicy		1.3.6.1.4.1.5504.5.16.1.12.2.1.37
This attribute defines the number of consecutive valid packets that causes the transmitted R bit to be cleared in the TDM to PSN direction, removing the remote failure indication to the far end. The default value 0 selects the ONT internal policy.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..255

zhoneCpePweRBitReceivePolicy		1.3.6.1.4.1.5504.5.16.1.12.2.1.38
This attribute defines the action toward the Nx64 TDM interface when remote failure is indicated on packets received from the PSN.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	nothing(1), alarm(2), idlechannel(3)

zhoneCpePweLBitReceivePolicy		1.3.6.1.4.1.5504.5.16.1.12.2.1.39
This attribute defines the action toward the TDM interface when far end TDM failure is indicated on packets received from the PSN.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	ais(1), repeatlastpkt(2), idlechannel(3)

zhoneCpePweSesThreshold		1.3.6.1.4.1.5504.5.16.1.12.2.1.40
Number of lost, malformed or otherwise unusable packets expected in the PSN to TDM direction within a one-second interval that causes a severely errored second to be counted. Stray packets do not count toward a severely errored second, nor do packets whose L bit is set at the far end. The default value is 3.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

zhoneCpePweCdvTolerance		1.3.6.1.4.1.5504.5.16.1.12.2.1.41
This attribute represents the duration of user data that must be buffered by the CES interworking entity to offset packet delay variation. It is expressed in 10 microsecond increments. The default value for DS1 CES is 750 micro seconds; for DS3 CES, it is 1000 micro seconds.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

zhoneCpePweChannelAssociatedSignalling		1.3.6.1.4.1.5504.5.16.1.12.2.1.42
This attribute selects the signalling format. It applies to structured interfaces only.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	base(1), e1cas(2), sfcas(3), ds1esfcas(4), j2cas(5)

zhoneCpePweMplsTpType		1.3.6.1.4.1.5504.5.16.1.12.2.1.43
This attribute specifies the type of ANI-side termination for the MPLS Pseudowire.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	ethernet(1), gem(2)

zhoneCpePweDscp		1.3.6.1.4.1.5504.5.16.1.12.2.1.44
This parameter indicates DSCP value for cpe pwe traffic. Valid code values: <0-63> Differentiated services codepoint value af11 Mark packets with AF11 dscp (001010) af12 Mark packets with AF12 dscp (001100) af13 Mark packets with AF13 dscp (001110) af21 Mark packets with AF21 dscp (010010) af22 Mark packets with AF22 dscp (010100) af23 Mark packets with AF23 dscp (010110) af31 Mark packets with AF31 dscp (011010) af32 Mark packets with AF32 dscp (011100) af33 Mark packets with AF33 dscp (011110) af41 Mark packets with AF41 dscp (100010) af42 Mark packets with AF42 dscp (100100) af43 Mark packets with AF43 dscp (100110) cs1 Mark packets with CS1(precedence 1) dscp (001000) cs2 Mark packets with CS2(precedence 2) dscp (010000) cs3 Mark packets with CS3(precedence 3) dscp (011000) cs4 Mark packets with CS4(precedence 4) dscp (100000) cs5 Mark packets with CS5(precedence 5) dscp (101000) cs6 Mark packets with CS6(precedence 6) dscp (110000) cs7 Mark packets with CS7(precedence 7) dscp (111000) default Mark packets with default dscp (000000) ef Mark packets with EF dscp (101110)
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(1..8)

zhoneCpeOnuModelInfoTable		1.3.6.1.4.1.5504.5.16.1.13
Cpe Onu Model Info table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeOnuModelInfoEntry

zhoneCpeOnuModelInfoEntry		1.3.6.1.4.1.5504.5.16.1.13.1
Row in the CpeOnuModelInfo table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeOnuModelInfoEntry

zhoneCpeOnuModelInfoIndex		1.3.6.1.4.1.5504.5.16.1.13.1.1
This represents the CpeOnuModelInfo Index.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeOnuModelName		1.3.6.1.4.1.5504.5.16.1.13.1.2
This repesents the Onu Model name.
Status: current	Access: read-only
OBJECT-TYPE
	ZhoneAdminString

zhoneCpeOnuBatteryBackup		1.3.6.1.4.1.5504.5.16.1.13.1.3
This represents the Onu battery backup.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

zhoneCpeOnuSipPlarSupported		1.3.6.1.4.1.5504.5.16.1.13.1.4
This represents whether SipPlar is supported on this ONU.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

zhoneCpeOnuEthSlotNumber		1.3.6.1.4.1.5504.5.16.1.13.1.5
This represents the Onu ethernet slot number.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeOnuNumberOfEthPorts		1.3.6.1.4.1.5504.5.16.1.13.1.6
This represents the number of ethernet ports on an ONU.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeOnuPotsSlotNumber		1.3.6.1.4.1.5504.5.16.1.13.1.7
This represents the Onu Pots Slot Number.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeOnuNumberOfPotsPorts		1.3.6.1.4.1.5504.5.16.1.13.1.8
This represents the number of Pots ports on an ONU.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeOnuRfVideoSlotNumber		1.3.6.1.4.1.5504.5.16.1.13.1.9
This represents the Onu RfVideo slot number.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeOnuNumberOfRfVideoPorts		1.3.6.1.4.1.5504.5.16.1.13.1.10
This represents the number of RfVideo ports.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeOnuCesSlotNumber		1.3.6.1.4.1.5504.5.16.1.13.1.11
This represents the Onu Ces slot number.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeOnuNumberOfCesPorts		1.3.6.1.4.1.5504.5.16.1.13.1.12
This represents the number of Ces ports on an ONU.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeOnuModelInfoRGBridged		1.3.6.1.4.1.5504.5.16.1.13.1.13
If TRUE, layer 2 bridging can only be configured via a RG management interface such as SNMP, TR-69, CLI or Web UI. Otherwise, VoIP can be configured via OMCI as well.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

zhoneCpeOnuNumberOfWlanPorts		1.3.6.1.4.1.5504.5.16.1.13.1.14
This represents the number of Wlan ports on an ONU.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

zhoneCpeOnuModelInfoRg		1.3.6.1.4.1.5504.5.16.1.13.1.15
If TRUE, CPE is capable of providing RG (residential gateway) services.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

zhoneCpeOnuModelInfoRgVoip		1.3.6.1.4.1.5504.5.16.1.13.1.16
If TRUE, VoIP can only be configured via a RG management interface such as SNMP, TR-69, CLI or Web UI. Otherwise, VoIP can be configured via OMCI as well.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

zhoneCpeOnuModelInfoRgPwe		1.3.6.1.4.1.5504.5.16.1.13.1.17
If TRUE, PWE can only be configured via a RG management interface such as SNMP, TR-69, CLI or Web UI. Otherwise, PWE can be configured via OMCI as well.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

zhoneCpeOnuModelInfoTftpDnld		1.3.6.1.4.1.5504.5.16.1.13.1.18
If TRUE, then this model support software image download via TFTP. Otherwise, only OMCI downloads are supported.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

zhoneCpeOnuSipSupported		1.3.6.1.4.1.5504.5.16.1.13.1.19
This represents whether Sip is supported on this ONU.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

zhoneCpeOnuH248Supported		1.3.6.1.4.1.5504.5.16.1.13.1.20
This represents whether H248 is supported on this ONU.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

zhoneCpeOnuMgcpSupported		1.3.6.1.4.1.5504.5.16.1.13.1.21
This represents whether MGCP is supported on this ONU.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

zhoneCpeOnuT1Supported		1.3.6.1.4.1.5504.5.16.1.13.1.22
This represents whether T1 is supported on this ONU.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

zhoneCpeOnuE1Supported		1.3.6.1.4.1.5504.5.16.1.13.1.23
This represents whether E1 is supported on this ONU.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

zhoneCpeOnuNumberOfPoEPorts		1.3.6.1.4.1.5504.5.16.1.13.1.24
This represents the number of Power over Ethernet ports on an ONU.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeConnectionTable		1.3.6.1.4.1.5504.5.16.1.14
This table stores information about the connection between a logical or physical interface on the managing device and a port on the CPE.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeConnectionEntry

zhoneCpeConnectionEntry		1.3.6.1.4.1.5504.5.16.1.14.1
Row in the CPE Connection table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeConnectionEntry

zhoneCpePortIfIndex		1.3.6.1.4.1.5504.5.16.1.14.1.1
ifIndex of the port on which this connection is based. For a GPON connection, this is the GEM port ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	InterfaceIndex

zhoneCpeTpType		1.3.6.1.4.1.5504.5.16.1.14.1.2
TpType identifies the type of termination point associated with this MAC bridge port.
Status: current	Access: not-accessible
OBJECT-TYPE
	TpType

zhoneCpeTpIndex		1.3.6.1.4.1.5504.5.16.1.14.1.3
TpIndex identifies the Index of termination point associated with this MAC bridge port.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	0..255

zhoneCpeVlanId		1.3.6.1.4.1.5504.5.16.1.14.1.4
The Virtual LAN Id for VLAN Tag Insertion.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	0..4096

zhoneCpeSlanId		1.3.6.1.4.1.5504.5.16.1.14.1.5
The Secure LAN Id for SLAN Tag Insertion.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	0..4096

zhoneCpeConnectionRowStatus		1.3.6.1.4.1.5504.5.16.1.14.1.6
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpeConnectionVlanCos		1.3.6.1.4.1.5504.5.16.1.14.1.7
The Class-Of-Service (COS) value used for VLAN Tag Insertion.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..8

zhoneCpeConnectionVlanTpId		1.3.6.1.4.1.5504.5.16.1.14.1.8
The value of the tag protocol identifier that is being used for QinQ packets. (0x8100 is default.). Valid values are : 1. 33024 ( 0x8100 ) 2. 34984 ( 0x88A8 ) 3. 37120 ( 0x9100 ) 4. 37376 ( 0x9200 )
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	33024 \| 34984 \| 37120 \| 37376

zhoneCpeConnectionSlanCos		1.3.6.1.4.1.5504.5.16.1.14.1.9
The Class-Of-Service (COS) value used for SLAN Tag Insertion.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..8

zhoneCpeConnectionSlanTpId		1.3.6.1.4.1.5504.5.16.1.14.1.10
The value of the tag protocol identifier that is being used for QinQ packets. (0x8100 is default.). Valid values are: 1. 33024 ( 0x8100 ) 2. 34984 ( 0x88A8 ) 3. 37120 ( 0x9100 ) 4. 37376 ( 0x9200 )
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	33024 \| 34984 \| 37120 \| 37376

zhoneCpeConnectionTranslateVlanId		1.3.6.1.4.1.5504.5.16.1.14.1.11
The Virtual LAN Id for VLAN Tag Insertion.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..4096

zhoneCpeConnectionTranslateVlanCos		1.3.6.1.4.1.5504.5.16.1.14.1.12
The Class-Of-Service (COS) value used for VLAN Tag Insertion.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..8

zhoneCpeConnectionTranslateVlanTpId		1.3.6.1.4.1.5504.5.16.1.14.1.13
The value of the tag protocol identifier that is being used for QinQ packets. (0x8100 is default.). Valid values are: 1. 33024 ( 0x8100 ) 2. 34984 ( 0x88A8 ) 3. 37120 ( 0x9100 ) 4. 37376 ( 0x9200 )
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	33024 \| 34984 \| 37120 \| 37376

zhoneCpeConnectionTranslateSlanId		1.3.6.1.4.1.5504.5.16.1.14.1.14
The Secure LAN Id for SLAN Tag Insertion.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..4096

zhoneCpeConnectionTranslateSlanCos		1.3.6.1.4.1.5504.5.16.1.14.1.15
The Class-Of-Service (COS) value used for SLAN Tag Insertion.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..8

zhoneCpeConnectionTranslateSlanTpId		1.3.6.1.4.1.5504.5.16.1.14.1.16
The value of the tag protocol identifier that is being used for QinQ packets. (0x8100 is default.). Valid values are: 1. 33024 ( 0x8100 ) 2. 34984 ( 0x88A8 ) 3. 37120 ( 0x9100 ) 4. 37376 ( 0x9200 )
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	33024 \| 34984 \| 37120 \| 37376

zhoneCpeConnectionFloodingGport		1.3.6.1.4.1.5504.5.16.1.14.1.17
This is the downstream only GEM port for broadcast unknown MAC address packets.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..4095

zhoneCpeConnectionVideoGport		1.3.6.1.4.1.5504.5.16.1.14.1.18
This is the downstream only multicast GEM port for IPTV content streams.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..4095

zhoneCpeConnectionDscpToCosProfileIndex		1.3.6.1.4.1.5504.5.16.1.14.1.19
Index of dscp-to-cos profile.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeConnectionRgMode		1.3.6.1.4.1.5504.5.16.1.14.1.20
Use to specify the RG service for a CPE. When creating or deleting a CPE connection, if the CPE does not support RG service then this object should not be provided. If a CPE does support RG service then this object must be provided. When reading this object, the value returned will be 'notApplicable'. This data is not preserved in the CPE connection profile.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	routed(1), brouted(2), rpppoe(3), bpppoe(4), bridged(5), notApplicable(6)

zhoneCpeConnectionGuidedVlanId		1.3.6.1.4.1.5504.5.16.1.14.1.21
The Guided VLAN Id for RG Services. A zero value means a guided vlan does not exist. If a guided vlan is used then uni-vlan and uni-slan values must be zero.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..4096

zhoneCpeConnectionGuidedCos		1.3.6.1.4.1.5504.5.16.1.14.1.22
The Guided Class-Of-Service (COS) value used for RG SERVICES. A zero means a guided cos does not exist.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..8

zhoneCpeRfSubscriberTable		1.3.6.1.4.1.5504.5.16.1.15
Cpe Rf Subscriber table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeRfSubscriberEntry

zhoneCpeRfSubscriberEntry		1.3.6.1.4.1.5504.5.16.1.15.1
Row in the Cpe Rf Subscriber table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeRfSubscriberEntry

zhoneCpeRfSubscriberPortNumber		1.3.6.1.4.1.5504.5.16.1.15.1.1
This represents the CPE Rf Subscriber port number.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeRfSubscriberRowStatus		1.3.6.1.4.1.5504.5.16.1.15.1.2
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpeRfSubscriberAdminState		1.3.6.1.4.1.5504.5.16.1.15.1.3
This attribute activates or deactivates the functions performed by the RF port for this subscriber or put the port in test mode.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminState

zhoneCpeRfSubscriberLineStatusAlarm		1.3.6.1.4.1.5504.5.16.1.15.1.4
This field is for enabling/disabling alarm reporting from this CPE UNI.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeRfSubscriberAlarmSeverity		1.3.6.1.4.1.5504.5.16.1.15.1.5
This field is for specifying the severity level of all the alarms from this CPE UNI.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAlarmSeverity

zhoneCpeTrafficManagement		1.3.6.1.4.1.5504.5.16.1.16
Cpe Traffic Management objects.
Status: current	Access: read-create
OBJECT-IDENTITY

zhoneCpeTrafficManagementIndexNext		1.3.6.1.4.1.5504.5.16.1.16.1
This object contains an appropriate value to be used for the zhoneCpeTrafficManagementIndex when creating entries in the zhoneCpeTrafficManagementTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeTrafficManagementIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zhoneCpeTrafficManagementTable		1.3.6.1.4.1.5504.5.16.1.16.2
Cpe Traffic Management table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeTrafficManagementEntry

zhoneCpeTrafficManagementEntry		1.3.6.1.4.1.5504.5.16.1.16.2.1
Row in the Cpe Traffic Management table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeTrafficManagementEntry

zhoneCpeTrafficManagementIndex		1.3.6.1.4.1.5504.5.16.1.16.2.1.1
This represents the CPE Traffic Management Index, values are from the range 1 to n.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeTrafficManagementRowStatus		1.3.6.1.4.1.5504.5.16.1.16.2.1.2
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpeTrafficManagementProfileName		1.3.6.1.4.1.5504.5.16.1.16.2.1.3
CPE Traffic Management profile for the dynamic bridging. This field is only writable upon creation and must be unique within its table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminString

zhoneCpeTrafficManagementUpstreamSIR		1.3.6.1.4.1.5504.5.16.1.16.2.1.4
This attribute specifies the upstream sustained information rate. Unit is kbps.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..1310720

zhoneCpeTrafficManagementUpstreamPIR		1.3.6.1.4.1.5504.5.16.1.16.2.1.5
This attribute specifies the upstream peak information rate. Unit is kbps.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..1310720

zhoneCpeTrafficManagementUpstreamPriority		1.3.6.1.4.1.5504.5.16.1.16.2.1.6
Upstream Priority, currently the only used value range is 0-7.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

zhoneCpeTrafficManagementUpstreamWeight		1.3.6.1.4.1.5504.5.16.1.16.2.1.7
Upstream Weight for weighted round robin scheduling, variable size is 1 byte, default 0.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..255

zhoneCpeTrafficManagementDownstreamSIR		1.3.6.1.4.1.5504.5.16.1.16.2.1.8
This attribute specifies the downstream sustained information rate. Unit is kbps.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..1310720

zhoneCpeTrafficManagementDownstreamPIR		1.3.6.1.4.1.5504.5.16.1.16.2.1.9
This attribute specifies the downstream peak information rate. Unit is kbps.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..1310720

zhoneCpeTrafficManagementDownstreamPriority		1.3.6.1.4.1.5504.5.16.1.16.2.1.10
Downstream Priority, currently the only used value range is 0-7.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

zhoneCpeTrafficManagementDownstreamWeight		1.3.6.1.4.1.5504.5.16.1.16.2.1.11
Downstream Weight for weighted round robin scheduling, variable size is 1 byte, default 0.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..255

zhoneCpeTrafficManagementPeakBurstSize		1.3.6.1.4.1.5504.5.16.1.16.2.1.12
Peak burst/block size, in bytes. Default value 0 means use CPE system default.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..512000

zhoneCpeSystemTable		1.3.6.1.4.1.5504.5.16.1.17
Cpe System table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeSystemEntry

zhoneCpeSystemEntry		1.3.6.1.4.1.5504.5.16.1.17.1
Row in the Cpe System table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeSystemEntry

zhoneCpeSystemRowStatus		1.3.6.1.4.1.5504.5.16.1.17.1.1
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpeSystemCommonProfileIndex		1.3.6.1.4.1.5504.5.16.1.17.1.2
This object points to the associated System Common profile.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeSystemMgcpClientName		1.3.6.1.4.1.5504.5.16.1.17.1.3
User string used in accessing the call agent. This is a unique value. This is not a mandatory field, users can leave it empty as well.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(1..64)

zhoneCpeSystemCommon		1.3.6.1.4.1.5504.5.16.1.18
Cpe System Common objects.
Status: current	Access: read-create
OBJECT-IDENTITY

zhoneCpeSystemCommonIndexNext		1.3.6.1.4.1.5504.5.16.1.18.1
This object contains an appropriate value to be used for the zhoneCpeSystemCommonIndex when creating entries in the zhoneCpeSystemCommonTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeSystemCommonIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

zhoneCpeSystemCommonTable		1.3.6.1.4.1.5504.5.16.1.18.2
Cpe System Common table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeSystemCommonEntry

zhoneCpeSystemCommonEntry		1.3.6.1.4.1.5504.5.16.1.18.2.1
Row in the Cpe System Common table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeSystemCommonEntry

zhoneCpeSystemCommonIndex		1.3.6.1.4.1.5504.5.16.1.18.2.1.1
This represents the CPE System Common index value.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeSystemCommonRowStatus		1.3.6.1.4.1.5504.5.16.1.18.2.1.2
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpeSystemCommonProfileName		1.3.6.1.4.1.5504.5.16.1.18.2.1.3
CPE System Common profile. This field is only writable upon creation and must be unique within its table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminString

zhoneCpeSystemCommonFirewall		1.3.6.1.4.1.5504.5.16.1.18.2.1.4
Enable/disable firewall. Enabling firewall can protect the CPE from unwanted instruction. When firewall is enabled, incoming connections can be selectively allowed through firewall access and port forwarding settings.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeSystemCommonSyncCookieProtection		1.3.6.1.4.1.5504.5.16.1.18.2.1.5
Protects against malicious attackers attempting to exploit TCP handshaking.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeSystemCommonCrossVlanRouting		1.3.6.1.4.1.5504.5.16.1.18.2.1.6
If enabled is selected, routing between VLANs is allowed. Enabled Route table lookups ignore the VLAN ID of the ingress and egress ports. If there is a match, the packet is routed out the interface specified in the Route table, regardless of which VLAN it is a member of. Cross VLAN Routing enabled is the default behavior. Disabled Packets will be forwarded to the configured Default Route for the VLAN that they arrived on, unless there is a Route Table match within that same VLAN. Routing of packets across VLANs is prevented, providing traffic isolation.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeStaticRouteListProfileIndex		1.3.6.1.4.1.5504.5.16.1.18.2.1.7
Address of the static-route-list profile associated with this CPE.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeDnsHostListProfile		1.3.6.1.4.1.5504.5.16.1.18.2.1.8
Index of the dns-host profile associated with this entry, or 0 if none.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

zhoneCpeSystemCommonTr69Inform		1.3.6.1.4.1.5504.5.16.1.18.2.1.9
Enable or Disable the generation of Inform messages to the ACS (Auto Configuration Server).
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeSystemCommonInformInterval		1.3.6.1.4.1.5504.5.16.1.18.2.1.10
Periodic interval (in seconds) at which Inform messages will be generated.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

zhoneCpeSystemCommonAcsUrl		1.3.6.1.4.1.5504.5.16.1.18.2.1.11
URL for the CPE to connect to the ACS
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..256)

zhoneCpeSystemCommonAcsUsername		1.3.6.1.4.1.5504.5.16.1.18.2.1.12
User name required for access to the ACS
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..64)

zhoneCpeSystemCommonAcsPassword		1.3.6.1.4.1.5504.5.16.1.18.2.1.13
User password required for access to the ACS.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..64)

zhoneCpeSystemCommonAdminPassword		1.3.6.1.4.1.5504.5.16.1.18.2.1.14
Log-in password for user account admin.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..16)

zhoneCpeSystemCommonSupportPassword		1.3.6.1.4.1.5504.5.16.1.18.2.1.15
Log-in password for user account support.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..16)

zhoneCpeSystemCommonUserPassword		1.3.6.1.4.1.5504.5.16.1.18.2.1.16
Log-in password for user account.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..16)

zhoneCpeSystemCommonPowerSupply		1.3.6.1.4.1.5504.5.16.1.18.2.1.17
The total watts the power supply plugged into the device can provide. Default value 0 means not specified.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeSystemCommonPowerShutdownDelay		1.3.6.1.4.1.5504.5.16.1.18.2.1.18
Power shedding control. Shutdown delay in minutes. When the unit detects that it is running on battery power, it has the option to shut down all support but the voice over IP telephone service. Default value 0 means not specified.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..60

zhoneCpeSystemCommonPowerRestoreDelay		1.3.6.1.4.1.5504.5.16.1.18.2.1.19
Power shedding control. Restore delay in minutes. When the unit detects that it is running on battery power, it has the option to shut down all support but the voice over IP telephone service. Default value 0 means not specified.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..10

zhoneCpeInterfaceVlanTable		1.3.6.1.4.1.5504.5.16.1.19
Cpe Interface Vlan table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeInterfaceVlanEntry

zhoneCpeInterfaceVlanEntry		1.3.6.1.4.1.5504.5.16.1.19.1
Row in the Cpe Interface Vlan table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeInterfaceVlanEntry

zhoneCpeInterfaceVlanRowStatus		1.3.6.1.4.1.5504.5.16.1.19.1.1
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpeInterfaceVlanRgMode		1.3.6.1.4.1.5504.5.16.1.19.1.2
Specifies the VLAN connection type of the interface.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	routed(1), brouted(2), routedpppoe(3), bridgedpppoe(4), bridged(5)

zhoneCpeInterfaceVlanTranslateVlanId		1.3.6.1.4.1.5504.5.16.1.19.1.3
The Virtual LAN Id for VLAN Tag Insertion.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..4096

zhoneCpeInterfaceVlanTranslateVlanCos		1.3.6.1.4.1.5504.5.16.1.19.1.4
The Class-Of-Service (COS) value used for VLAN Tag Insertion.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..8

zhoneCpeInterfaceVlanTranslateSlanId		1.3.6.1.4.1.5504.5.16.1.19.1.5
The Secure LAN Id for SLAN Tag Insertion.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..4096

zhoneCpeInterfaceVlanTranslateSlanCos		1.3.6.1.4.1.5504.5.16.1.19.1.6
The Class-Of-Service (COS) value used for SLAN Tag Insertion.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..8

zhoneCpeInterfaceVlanTranslateSlanTpId		1.3.6.1.4.1.5504.5.16.1.19.1.7
The value of the tag protocol identifier that is being used for QinQ packets. (0x8100 is default). Valid values are: 1. 33024 ( 0x8100 ) 2. 34984 ( 0x88A8 ) 3. 37120 ( 0x9100 ) 4. 37376 ( 0x9200 )
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	33024 \| 34984 \| 37120 \| 37376

zhoneCpeInterfaceVlanIpAddress		1.3.6.1.4.1.5504.5.16.1.19.1.8
The address used for IP host services. Default is 0.0.0.0.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zhoneCpeIpServerProfile		1.3.6.1.4.1.5504.5.16.1.19.1.9
The address of the cpe-ip-server profile associated with this host IP address. The value 0 indicates no associated cpe-ip-server profile.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeDhcpServerProfileIndex		1.3.6.1.4.1.5504.5.16.1.19.1.10
The address of the DHCP server profile associated with this interface. The value 0 indicates no associated cpe-dhcp-server profile.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpePortFwdListProfileIndex		1.3.6.1.4.1.5504.5.16.1.19.1.11
The address of the port fwd list profile associated with this interface. It is only supported on a WAN interface. The value 0 indicates no associated cpe-port-fwding profile.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeDhcpServer		1.3.6.1.4.1.5504.5.16.1.20
Cpe Dhcp Server objects.
Status: current	Access: read-create
OBJECT-IDENTITY

zhoneCpeDhcpServerIndexNext		1.3.6.1.4.1.5504.5.16.1.20.1
This object contains an appropriate value to be used for the zhoneCpeDhcpServerIndex when creating entries in the zhoneCpeDhcpServerTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeDhcpServerIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zhoneCpeDhcpServerTable		1.3.6.1.4.1.5504.5.16.1.20.2
Cpe Dhcp Server table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeDhcpServerEntry

zhoneCpeDhcpServerEntry		1.3.6.1.4.1.5504.5.16.1.20.2.1
Row in the Cpe Dhcp Server table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeDhcpServerEntry

zhoneCpeDhcpServerIndex		1.3.6.1.4.1.5504.5.16.1.20.2.1.1
This represents the CPE DHCP server index value.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeDhcpServerRowStatus		1.3.6.1.4.1.5504.5.16.1.20.2.1.2
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpeDhcpServerProfileName		1.3.6.1.4.1.5504.5.16.1.20.2.1.3
CPE DHCP Server profile. This field is only writable upon creation and must be unique within its table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminString

zhoneCpeDhcpServerStartAddress		1.3.6.1.4.1.5504.5.16.1.20.2.1.4
First address in the pool to be assigned by the DHCP server. Default value is 0.0.0.0.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zhoneCpeDhcpServerEndAddress		1.3.6.1.4.1.5504.5.16.1.20.2.1.5
Last address in the pool to be assigned by the DHCP server. Default value is 0.0.0.0.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zhoneCpeDhcpServerLeaseTime		1.3.6.1.4.1.5504.5.16.1.20.2.1.6
Lease time in seconds of client assigned addresses. A value of -1 indicates an infinite lease.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	-1..2147483647

zhoneCpeDhcpServerConditionalServerListProfile		1.3.6.1.4.1.5504.5.16.1.20.2.1.7
Index of the dhcp-conditional-server-list profile associated with this entry, or 0 if none.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

zhoneCpePppoeTable		1.3.6.1.4.1.5504.5.16.1.21
Cpe PPPOE table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpePppoeEntry

zhoneCpePppoeEntry		1.3.6.1.4.1.5504.5.16.1.21.1
Row in the Cpe PPPOE table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpePppoeEntry

zhoneCpePppoeRowStatus		1.3.6.1.4.1.5504.5.16.1.21.1.1
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpePppoeUsername		1.3.6.1.4.1.5504.5.16.1.21.1.2
The login user name to be used for PPP authentication.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(1..64)

zhoneCpePppoePassword		1.3.6.1.4.1.5504.5.16.1.21.1.3
The login password to be used for PPP authentication.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(1..25)

zhoneCpePppoeAuthentication		1.3.6.1.4.1.5504.5.16.1.21.1.4
The PPP authentication protocol to be used for PPP authentication.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	auto(1), pap(2), chap(3), mschap(4)

zhoneCpePppoeRetryInterval		1.3.6.1.4.1.5504.5.16.1.21.1.5
Time in seconds before retrying connection.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeWlanSubscriberTable		1.3.6.1.4.1.5504.5.16.1.22
Cpe Wlan Subscriber table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeWlanSubscriberEntry

zhoneCpeWlanSubscriberEntry		1.3.6.1.4.1.5504.5.16.1.22.1
Row in the Cpe Wlan Subscriber table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeWlanSubscriberEntry

zhoneCpeWlanSubscriberIndex		1.3.6.1.4.1.5504.5.16.1.22.1.1
This represents the CPE WLAN subscriber index value.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeWlanSubscriberRowStatus		1.3.6.1.4.1.5504.5.16.1.22.1.2
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpeWlanSubscriberAdminState		1.3.6.1.4.1.5504.5.16.1.22.1.3
This attribute activates or deactivates the functions performed by the wireless LAN interface for this subscriber or put the interface in test mode. Values are Up, Down, Test.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminState

zhoneCpeWlanSubscriberSsid		1.3.6.1.4.1.5504.5.16.1.22.1.4
The SSID assigned to the wireless LAN interface.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(1..32)

zhoneCpeWlanSubscriberEncryptKey		1.3.6.1.4.1.5504.5.16.1.22.1.5
WEP 64-bit encryption key: 5 ASCII characters or 10 hexadecimal digits WEP 128-bit encryption key: 13 ASCII charactess or 26 hexadecimal digits WPA Passphrase: 64 characters.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(1..64)

zhoneCpeWlanSubscriberDevicePin		1.3.6.1.4.1.5504.5.16.1.22.1.6
Device pin is only applicable when WPS security method is enabled.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(1..8)

zhoneCpeWlanSubscriberRadiusKey		1.3.6.1.4.1.5504.5.16.1.22.1.7
Remote Authentication Dial In User Server (RADIUS) authentication key. This field cannot contain a SPACE and is returned as a string of asterisks.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(1..13)

zhoneCpeWlanProfileIndex		1.3.6.1.4.1.5504.5.16.1.22.1.8
The address of cpe-wlan profile associated with this CPE.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeAccessControlListProfileIndex		1.3.6.1.4.1.5504.5.16.1.22.1.9
The address of cpe-access-ctrl-list profile associated with this CPE.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeWdsMacListProfileIndex		1.3.6.1.4.1.5504.5.16.1.22.1.10
The address of cpe-wds-mac-ctrl-list profile associated with this CPE.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeWlanAdvProfileIndex		1.3.6.1.4.1.5504.5.16.1.22.1.11
The address of cpe-wlan-advanced profile associated with this CPE.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeWlan		1.3.6.1.4.1.5504.5.16.1.23
Cpe Wlan objects.
Status: current	Access: read-create
OBJECT-IDENTITY

zhoneCpeWlanIndexNext		1.3.6.1.4.1.5504.5.16.1.23.1
This object contains an appropriate value to be used for the zhoneCpeWlanIndex when creating entries in the zhoneCpeWlanTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeWlanIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zhoneCpeWlanTable		1.3.6.1.4.1.5504.5.16.1.23.2
Cpe Wlan table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeWlanEntry

zhoneCpeWlanEntry		1.3.6.1.4.1.5504.5.16.1.23.2.1
Row in the Cpe Wlan table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeWlanEntry

zhoneCpeWlanIndex		1.3.6.1.4.1.5504.5.16.1.23.2.1.1
This represents the CPE WLAN index value.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeWlanRowStatus		1.3.6.1.4.1.5504.5.16.1.23.2.1.2
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpeWlanProfileName		1.3.6.1.4.1.5504.5.16.1.23.2.1.3
This field is only writable upon creation and must be unique within its table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminString

zhoneCpeWlanHideAccessPoint		1.3.6.1.4.1.5504.5.16.1.23.2.1.4
Enable or disable the suppression of the advertising of the access point's SSID. If enabled, clients will need to configure the SSID to associate.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeWlanIsolateClients		1.3.6.1.4.1.5504.5.16.1.23.2.1.5
Isolate clients within the wireless network from communicating directly with each other.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeWlanWmmAdvertise		1.3.6.1.4.1.5504.5.16.1.23.2.1.6
WMM (Wireless Multi Media) provides a subset of the IEEE 802.11e QoS standard, which adds prioritization to wireless to optimize their performance. When multiple concurrent applications are on the wireless network each application may have different latency and throughput needs. WMM provides for this optimization, however WMM may provide slower.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeWlanMcastFwd		1.3.6.1.4.1.5504.5.16.1.23.2.1.7
Wireless Multicast Forwarding enables the ability to send wireless packets to be intercepted by all nodes in the transmission range of the sender.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeWlanMaxClients		1.3.6.1.4.1.5504.5.16.1.23.2.1.8
The maximum number of wireless client devices that may be simultaneously connected to the wireless network.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..50

zhoneCpeWlanNetAuthentication		1.3.6.1.4.1.5504.5.16.1.23.2.1.9
Configure the network authentication method.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	open(1), shared(2), dot1x(3), wpa(4), wpapsk(5), wpa2(6), wpa2psk(7), mixedwpa2wpa(8), mixedwpa2wpapsk(9)

zhoneCpeWlanWpaGroupRekeyInterval		1.3.6.1.4.1.5504.5.16.1.23.2.1.10
Wpa Group Rekey Interval.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeWlanWpaEncryption		1.3.6.1.4.1.5504.5.16.1.23.2.1.11
WPA encryption mode.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	aes(1), tkipaes(2)

zhoneCpeWlanWepEncryption		1.3.6.1.4.1.5504.5.16.1.23.2.1.12
WEP encryption mode.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeWlanWepStrength		1.3.6.1.4.1.5504.5.16.1.23.2.1.13
WEP encryption strength.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	bit64(1), bit128(2)

zhoneCpeWlanRadiusServerIp		1.3.6.1.4.1.5504.5.16.1.23.2.1.14
IP address of the Remote Authentication Dial In User Server (RADIUS) used for 802.1x authentication. Default is 0.0.0.0.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zhoneCpeWlanRadiusPort		1.3.6.1.4.1.5504.5.16.1.23.2.1.15
UDP port to use for accessing the Remote Authentication Dial In User Server (RADIUS).
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..99999

zhoneCpeWlanWpa2PreAuthentication		1.3.6.1.4.1.5504.5.16.1.23.2.1.16
Enable or disable WPA2 pre-authentication.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeWlanNetReAuthenticationInterval		1.3.6.1.4.1.5504.5.16.1.23.2.1.17
Configure the WPA2 network re-authentication time, in seconds.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeStaticRouteList		1.3.6.1.4.1.5504.5.16.1.24
Cpe Static Route List objects.
Status: current	Access: read-create
OBJECT-IDENTITY

zhoneCpeStaticRouteListIndexNext		1.3.6.1.4.1.5504.5.16.1.24.1
This object contains an appropriate value to be used for the zhoneCpeStaticRouteListIndex when creating entries in the zhoneCpeStaticRouteListTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeStaticRouteListIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zhoneCpeStaticRouteListTable		1.3.6.1.4.1.5504.5.16.1.24.2
Cpe Static Route List table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeStaticRouteListEntry

zhoneCpeStaticRouteListEntry		1.3.6.1.4.1.5504.5.16.1.24.2.1
Row in the Cpe Static Route List table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeStaticRouteListEntry

zhoneCpeStaticRouteListIndex		1.3.6.1.4.1.5504.5.16.1.24.2.1.1
This represents the CPE Static Route List index value.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeStaticRouteListRowStatus		1.3.6.1.4.1.5504.5.16.1.24.2.1.2
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpeStaticRouteListProfileName		1.3.6.1.4.1.5504.5.16.1.24.2.1.3
CPE Static Route List profile. This field is only writable upon creation and must be unique within its table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminString

zhoneCpeStaticRoute		1.3.6.1.4.1.5504.5.16.1.25
Cpe Static Route Entry objects.
Status: current	Access: read-create
OBJECT-IDENTITY

zhoneCpeStaticRouteIndexTable		1.3.6.1.4.1.5504.5.16.1.25.1
Table of next available index values for CPE static route entry profile.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeStaticRouteIndexEntry

zhoneCpeStaticRouteIndexEntry		1.3.6.1.4.1.5504.5.16.1.25.1.1
Row in the zhoneCpeStaticRouteEntryIndexTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeStaticRouteIndexEntry

zhoneCpeStaticRouteEntryIndexNext		1.3.6.1.4.1.5504.5.16.1.25.1.1.1
This represents the next available index value for the cpe static route entry profile.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

zhoneCpeStaticRouteTable		1.3.6.1.4.1.5504.5.16.1.25.2
Cpe Static Route Entry table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeStaticRouteEntry

zhoneCpeStaticRouteEntry		1.3.6.1.4.1.5504.5.16.1.25.2.1
Row in the Cpe Static Route Entry table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeStaticRouteEntry

zhoneCpeStaticRouteEntryIndex		1.3.6.1.4.1.5504.5.16.1.25.2.1.1
This represents the CPE Static Route Entry Entry Index.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeStaticRouteRowStatus		1.3.6.1.4.1.5504.5.16.1.25.2.1.2
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpeStaticRouteDestinationIp		1.3.6.1.4.1.5504.5.16.1.25.2.1.3
The IP address of the destination network or host. Default is 0.0.0.0.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zhoneCpeStaticRouteNetmask		1.3.6.1.4.1.5504.5.16.1.25.2.1.4
Destination subnet mask. A value of 0.0.0.0 indicates no destination subnet mask is specified. Default is 255.255.255.0.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zhoneCpeStaticRouteGateway		1.3.6.1.4.1.5504.5.16.1.25.2.1.5
Next hop IpAddress. Default value is 0.0.0.0.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zhoneCpeStaticRouteMetric		1.3.6.1.4.1.5504.5.16.1.25.2.1.6
Number of hops to reach the destination. A value of 0 indicates this metric is not used.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..2147483647

zhoneCpePortFwdList		1.3.6.1.4.1.5504.5.16.1.26
Cpe Port Fwd List objects.
Status: current	Access: read-create
OBJECT-IDENTITY

zhoneCpePortFwdListIndexNext		1.3.6.1.4.1.5504.5.16.1.26.1
This object contains an appropriate value to be used for the zhoneCpePortFwdListIndex when creating entries in the zhoneCpePortFwdListTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpePortFwdListIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zhoneCpePortFwdListTable		1.3.6.1.4.1.5504.5.16.1.26.2
Cpe Port Fwd List table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpePortFwdListEntry

zhoneCpePortFwdListEntry		1.3.6.1.4.1.5504.5.16.1.26.2.1
Row in the Cpe Port Fwd List table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpePortFwdListEntry

zhoneCpePortFwdListIndex		1.3.6.1.4.1.5504.5.16.1.26.2.1.1
This represents the CPE Port Fwd List index value.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpePortFwdListRowStatus		1.3.6.1.4.1.5504.5.16.1.26.2.1.2
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpePortFwdListProfileName		1.3.6.1.4.1.5504.5.16.1.26.2.1.3
CPE Port Fwd List profile. This field is only writable upon creation and must be unique within its table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminString

zhoneCpePortFwd		1.3.6.1.4.1.5504.5.16.1.27
Cpe Port Fwd Entry objects.
Status: current	Access: read-create
OBJECT-IDENTITY

zhoneCpePortFwdIndexTable		1.3.6.1.4.1.5504.5.16.1.27.1
Table of next available index values for CPE port fwd entry profile.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpePortFwdIndexEntry

zhoneCpePortFwdIndexEntry		1.3.6.1.4.1.5504.5.16.1.27.1.1
Row in the zhoneCpePortFwdEntryIndexTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpePortFwdIndexEntry

zhoneCpePortFwdEntryIndexNext		1.3.6.1.4.1.5504.5.16.1.27.1.1.1
This represents the next available index value for the cpe port fwd entry profile.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

zhoneCpePortFwdTable		1.3.6.1.4.1.5504.5.16.1.27.2
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpePortFwdEntry

zhoneCpePortFwdEntry		1.3.6.1.4.1.5504.5.16.1.27.2.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpePortFwdEntry

zhoneCpePortFwdEntryIndex		1.3.6.1.4.1.5504.5.16.1.27.2.1.1
This represents the CPE Port Fwd Entry Entry Index.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpePortFwdRowStatus		1.3.6.1.4.1.5504.5.16.1.27.2.1.2
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpePortFwdType		1.3.6.1.4.1.5504.5.16.1.27.2.1.3
portRange - Range indicates that any traffic on those ports will be sent to the private IP address. portRemap - Remap indicates that any traffic on those ports will be sent to the private IP address at the private port. dmz - When DMZ is chosen it is the only rule allowed on that interface. A DMZ rule is effectively the same as a rule with all ports included. Range rules are more secure than setting a DMZ rule, because Range rules allow ports or groups of ports to be opened up.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	dmz(1), portrange(2), portremap(3)

zhoneCpePortFwdPortStart		1.3.6.1.4.1.5504.5.16.1.27.2.1.4
Lowest value port number for the range.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

zhoneCpePortFwdPortEnd		1.3.6.1.4.1.5504.5.16.1.27.2.1.5
Highest value port number for the range. This can be equal to port-start if there is only one port.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

zhoneCpePortFwdProtocol		1.3.6.1.4.1.5504.5.16.1.27.2.1.6
Indicate which protocols to monitor for the port numbers.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	none(1), tcp(2), udp(3), tcpudp(4), icmp(5), icmpv4(6)

zhoneCpePortFwdPrivatePort		1.3.6.1.4.1.5504.5.16.1.27.2.1.7
The port number with which to send the traffic.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

zhoneCpePortFwdPrivateIp		1.3.6.1.4.1.5504.5.16.1.27.2.1.8
The port IP Address with which to send the traffic. The default value is 0.0.0.0.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zhoneCpeServiceApplication		1.3.6.1.4.1.5504.5.16.1.28
CPE Service Application for CPEs.
Status: current	Access: read-create
OBJECT-IDENTITY

zhoneCpeServiceApplicationTable		1.3.6.1.4.1.5504.5.16.1.28.1
Cpe Service Application table for CPEs.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeServiceApplicationEntry

zhoneCpeServiceApplicationEntry		1.3.6.1.4.1.5504.5.16.1.28.1.1
Row in the CpeServiceApplication table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeServiceApplicationEntry

zhoneCpeServiceApplicationTemplateType		1.3.6.1.4.1.5504.5.16.1.28.1.1.1
This represents the Template type associated with the service. For example, VOIP, Data, Video, PWE etc.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	ZhoneCpeTemplateType

zhoneCpeServiceApplicationTemplateId		1.3.6.1.4.1.5504.5.16.1.28.1.1.2
This represents the Template id of the cpe service application. Template ID is maitntained by the device manager. Template ID is asigned based on the service application configured on the CPE.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeServiceApplicationVirtualConnection		1.3.6.1.4.1.5504.5.16.1.28.1.1.3
This represents the Virtual connection of the cpe service application. For example, in case of GPON CPE, GEM port is the virtual connection.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeServiceApplicationTpType		1.3.6.1.4.1.5504.5.16.1.28.1.1.4
This represents the Transport point (TP) in the CPE. For example, ethernet, pots etc.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	TpType

zhoneCpeServiceApplicationTpIndex		1.3.6.1.4.1.5504.5.16.1.28.1.1.5
This represents the Transport point (TP) Number associated with the transport point type.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeServiceApplicationRowStatus		1.3.6.1.4.1.5504.5.16.1.28.1.1.6
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpeServiceApplicationVlan		1.3.6.1.4.1.5504.5.16.1.28.1.1.7
This field consists of vlan-cos (high-order 2 bytes) and vlan-id (low-order 2 bytes).
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Unsigned32

zhoneCpeServiceApplicationSlan		1.3.6.1.4.1.5504.5.16.1.28.1.1.8
This field consists of vlan-cos (high-order 2 bytes) and vlan-id (low-order 2 bytes).
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Unsigned32

zhoneCpeDnsHostList		1.3.6.1.4.1.5504.5.16.1.29
Dns Host List Objects.
Status: current	Access: accessible-for-notify
OBJECT-IDENTITY

zhoneCpeDnsHostListIndexNext		1.3.6.1.4.1.5504.5.16.1.29.1
This object contains an appropriate value to be used for the zhoneCpeDnsHostListIndex when creating entries in the zhoneCpeDnsHostListTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeDnsHostListIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zhoneCpeDnsHostListTable		1.3.6.1.4.1.5504.5.16.1.29.2
The table of DNS host lists.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeDnsHostListEntry

zhoneCpeDnsHostListEntry		1.3.6.1.4.1.5504.5.16.1.29.2.1
Row in the zhoneCpeDnsHostList table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeDnsHostListEntry

zhoneCpeDnsHostListIndex		1.3.6.1.4.1.5504.5.16.1.29.2.1.2
Index number for the zhoneCpeDnsHostList table entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

zhoneCpeDnsHostListRowStatus		1.3.6.1.4.1.5504.5.16.1.29.2.1.3
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zhoneCpeDnsHostListProfileName		1.3.6.1.4.1.5504.5.16.1.29.2.1.4
Profile name for this cpe-dns-host profile. This must be unique, and is writable only on creation.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminString

zhoneCpeDnsHost		1.3.6.1.4.1.5504.5.16.1.30
Cpe Dns host objects.
Status: current	Access: read-create
OBJECT-IDENTITY

zhoneCpeDnsHostIndexTable		1.3.6.1.4.1.5504.5.16.1.30.1
Table of next available values for Dns Host Entry index.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeDnsHostIndexEntry

zhoneCpeDnsHostIndexEntry		1.3.6.1.4.1.5504.5.16.1.30.1.1
Row in the zhoneCpeDnsHostIndex table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeDnsHostIndexEntry

zhoneCpeDnsHostIndexEntryIndexNext		1.3.6.1.4.1.5504.5.16.1.30.1.1.1
Next available entry index for row in zhoneCpeDnsHostTable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zhoneCpeDnsHostTable		1.3.6.1.4.1.5504.5.16.1.30.2
The table of Cpe Dns Host entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeDnsHostEntry

zhoneCpeDnsHostEntry		1.3.6.1.4.1.5504.5.16.1.30.2.1
A row in the Cpe Dns Host table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeDnsHostEntry

zhoneCpeDnsHostEntryIndex		1.3.6.1.4.1.5504.5.16.1.30.2.1.1
Index for this entry within the CpeDnsHost list.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

zhoneCpeDnsHostRowStatus		1.3.6.1.4.1.5504.5.16.1.30.2.1.2
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zhoneCpeDnsHostDomainName		1.3.6.1.4.1.5504.5.16.1.30.2.1.3
The domain name assigned to the host IP address.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..256)

zhoneCpeDnsHostIpAddress		1.3.6.1.4.1.5504.5.16.1.30.2.1.4
Host IP address.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zhoneCpeWlanAdvanced		1.3.6.1.4.1.5504.5.16.1.31
Cpe Wlan Advanced objects.
Status: current	Access: read-create
OBJECT-IDENTITY

zhoneCpeWlanAdvIndexNext		1.3.6.1.4.1.5504.5.16.1.31.1
This object contains an appropriate value to be used for the zhoneCpeWlanIndex when creating entries in the zhoneCpeWlanTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeWlanIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zhoneCpeWlanAdvancedTable		1.3.6.1.4.1.5504.5.16.1.31.2
Cpe Wlan Advanced table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeWlanAdvancedEntry

zhoneCpeWlanAdvancedEntry		1.3.6.1.4.1.5504.5.16.1.31.2.1
Row in the Cpe Wlan Advanced table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeWlanAdvancedEntry

zhoneCpeWlanAdvIndex		1.3.6.1.4.1.5504.5.16.1.31.2.1.1
This represents the CPE WLAN Advanced index value.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..2147483647

zhoneCpeWlanAdvRowStatus		1.3.6.1.4.1.5504.5.16.1.31.2.1.2
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpeWlanAdvProfileName		1.3.6.1.4.1.5504.5.16.1.31.2.1.3
This field is only writable upon creation and must be unique within its table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminString

zhoneCpeWlanAdvChannel		1.3.6.1.4.1.5504.5.16.1.31.2.1.4
Defines which channel to use, or 'auto' for automatic selection of a channel with low interference. 802.11b and 802.11g use channels to limit interference from other devices.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	auto(1), c1(2), c2(3), c3(4), c4(5), c5(6), c6(7), c7(8), c8(9), c9(10), c10(11), c11(12), c12(13), c13(14)

zhoneCpeWlanAdvAutoChanTimer		1.3.6.1.4.1.5504.5.16.1.31.2.1.5
When configured for auto mode, this timer value specifies how often (in minutes) to re-analyze the spectrum to select a low interference channel. Note: auto channel rescan will only occur when there are no actively connected devices.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2147483647

zhoneCpeWlanAdvDot11nMode		1.3.6.1.4.1.5504.5.16.1.31.2.1.6
802.11n MIMO EWC modes of operation. 802.11n improves data rates via MIMO (multiple-input, multiple-output) using spatial streams which each have a channel width of 40 MHz or 20 MHz. Usage of 802.11n in the 2.4 and 5GHz modes should depend on interference with other 802.11 or bluetooth systems on the same frequency. Enhanced Wireless Consortium (EWC) provides extra enhancements (adding the ability to define 20 MHz channels).
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	auto(1), disabled(2)

zhoneCpeWlanAdvDot11nRate		1.3.6.1.4.1.5504.5.16.1.31.2.1.7
Supported 802.11n MIMO rates, in Mbps.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	auto(1), use54g(2), rate6dot5m(3), rate13m(4), rate19dot5m(5), rate26m(6), rate39m(7), rate58dot5m(9), rate65m(10), rate78m(11), rate104m(12), rate117m(13), rate130m(14)

zhoneCpeWlanAdvDot1nProtection		1.3.6.1.4.1.5504.5.16.1.31.2.1.8
802.11n MIMO protection modes.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	auto(1), disabled(2)

zhoneCpeWlanAdvDot1nClientOnly		1.3.6.1.4.1.5504.5.16.1.31.2.1.9
Enable or disable the restriction of access to 802.11n clients, only. When enabled, prevent 802.11b/g clients from connecting.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeWlanAdvRate54G		1.3.6.1.4.1.5504.5.16.1.31.2.1.10
The rate when the radio is operating in 802.11g mode. This object only applies when the Multiple Input Multiple Output (MIMO) 802.11n Rate is set to use 54g.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	auto(1), rate1m(2), rate2m(3), rate5dot5m(4), rate6m(5), rate9m(6), rate11m(7), rate12m(8), rate18m(9), rate24m(10), rate36m(11), rate48m(12), rate54m(13)

zhoneCpeWlanAdvMcastRate		1.3.6.1.4.1.5504.5.16.1.31.2.1.11
The rate for the multicast traffic.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	auto(1), rate1m(2), rate2m(3), rate5dot5m(4), rate6m(5), rate9m(6), rate11m(7), rate12m(8), rate18m(9), rate24m(10), rate36m(11), rate48m(12), rate54m(13)

zhoneCpeWlanAdvBasicRate		1.3.6.1.4.1.5504.5.16.1.31.2.1.12
The rate when the radio is operating in basic 802.11b/g mode.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	default(1), all(2), rate1n2(3), stdrates(4)

zhoneCpeWlanAdvFragmentationThreshold		1.3.6.1.4.1.5504.5.16.1.31.2.1.13
The threshold at which the packets are fragmented.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	256..2346

zhoneCpeWlanAdvRtsThreshold		1.3.6.1.4.1.5504.5.16.1.31.2.1.14
The packet size of a request-to-send (RTS) transmission. A low threshold implies RTS packets are sent more frequently, thus requiring more bandwidth but ensuring packet transmission on a busy network.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2347

zhoneCpeWlanAdvDtimInterval		1.3.6.1.4.1.5504.5.16.1.31.2.1.15
The interval at which Delivery Traffic Indication Messages (DTIM) are generated. A DTIM message notifies a wireless client that a packet is waiting for transmission.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..255

zhoneCpeWlanAdvBeaconInterval		1.3.6.1.4.1.5504.5.16.1.31.2.1.16
The interval at which Beacons are generated.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..65535

zhoneCpeWlanAdvGlobalMaxClients		1.3.6.1.4.1.5504.5.16.1.31.2.1.17
The maximum number of wireless client devices that may be simultaneously connected to the radio. This value should include the sum total of all active SSIDs.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..128

zhoneCpeWlanAdvXpressTechnology		1.3.6.1.4.1.5504.5.16.1.31.2.1.18
Enable or disable the XPress(TM) Technology.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeWlanAdvTxPower		1.3.6.1.4.1.5504.5.16.1.31.2.1.19
The percentage of total power that should be used for data transmissions.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..100

zhoneCpeWlanAdvWmm		1.3.6.1.4.1.5504.5.16.1.31.2.1.20
Enable or disable Wifi Multimedia. When set to TRUE, audio, video and voice application data is prioritized over other network traffic.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeWlanAdvWmmNoAck		1.3.6.1.4.1.5504.5.16.1.31.2.1.21
Enable or disable the suppression of acknowledgements for frames that do not require a QOS Acknowledgement. This avoids the unnecessary transmission of acknowledgements for highly time-critical data.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeWlanAdvWmmApsd		1.3.6.1.4.1.5504.5.16.1.31.2.1.22
Enable or disable the Automatic Power Save Delivery (APSD) power management method. This feature is useful for bi-directional applications, such as VoIp phones.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeWlanAdvApMode		1.3.6.1.4.1.5504.5.16.1.31.2.1.23
Wireless bridge modes of operation.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	accesspoint(1), wirelessbridge(2)

zhoneCpeWlanAdvBridgeRestrict		1.3.6.1.4.1.5504.5.16.1.31.2.1.24
Wireless Bridge Restriction Modes of operation.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), enabledscan(2), disabled(3)

zhoneCpeWlanAdvWps		1.3.6.1.4.1.5504.5.16.1.31.2.1.25
Enable or disable WiFi Protected Setup (WPS) security method. If WPS is enabled, the network authentication method, the data encryption, and network key should also be configured in order to authenticate to this wireless network. It is available for WPA-PSK, WPA2-PSK, Mixed WPA2/WPA-PSK and Open Network Authentication methods.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeWlanAdvWpsAddClientMethod		1.3.6.1.4.1.5504.5.16.1.31.2.1.26
A client can be added via three different methods.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	pushbutton(1), stapin(2), appin(3)

zhoneCpeWlanAdvWpsApMode		1.3.6.1.4.1.5504.5.16.1.31.2.1.27
If the provider is using an external registrar for security, select configured. The PIN for AP mode is specified by the registrar. Provide this PIN to the client. Issue Config AP to begin the registration process with the client.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	configured(1), unconfigured(2)

zhoneCpeCondDhcpSrvList		1.3.6.1.4.1.5504.5.16.1.32
Conditional DHCP server list objects
Status: current	Access: read-create
OBJECT-IDENTITY

zhoneCpeCondiDhcpSrvListIndexNext		1.3.6.1.4.1.5504.5.16.1.32.1
This object contains an appropriate value to be used for the zhoneCpeCondDhcpSrvListIndex when creating entries in the zhoneCpeCondDhcpSrvListTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeCondDhcpSrvListIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zhoneCpeCondDhcpSrvListTable		1.3.6.1.4.1.5504.5.16.1.32.2
Table in which each entry is a list of conditional dhcp server rules.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeCondDhcpSrvListEntry

zhoneCpeCondDhcpSrvListEntry		1.3.6.1.4.1.5504.5.16.1.32.2.1
Row in conditional DHCP server list table
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeCondDhcpSrvListEntry

zhoneCpeCondDhcpSrvListIndex		1.3.6.1.4.1.5504.5.16.1.32.2.1.1
Index number for this cpe conditional dhcp server list. This is the number that goes into the cpe-dhcp-server record.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

zhoneCpeCondDhcpSrvListRowStatus		1.3.6.1.4.1.5504.5.16.1.32.2.1.2
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zhoneCpeCondDhcpSrvListProfileName		1.3.6.1.4.1.5504.5.16.1.32.2.1.3
Profile name for this cpe-cond-dhcp-srv-list profile. This must be unique, and is writable only on creation.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminString

zhoneCpeCondDhcpSrv		1.3.6.1.4.1.5504.5.16.1.33
Conditional DHCP server objects
Status: current	Access: read-create
OBJECT-IDENTITY

zhoneCpeCondDhcpSrvIndexTable		1.3.6.1.4.1.5504.5.16.1.33.1
Table of next available indexes for each conditional DHCP server list.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeCondDhcpSrvIndexEntry

zhoneCpeCondDhcpSrvIndexEntry		1.3.6.1.4.1.5504.5.16.1.33.1.1
Row in the conditional DHCP server index table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeCondDhcpSrvIndexEntry

zhoneCpeCondDhcpSrvIndexEntryIndexNext		1.3.6.1.4.1.5504.5.16.1.33.1.1.1
Next available index for a conditional DHCP server list.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zhoneCpeCondDhcpSrvTable		1.3.6.1.4.1.5504.5.16.1.33.2
Table of conditional DHCP server data.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeCondDhcpSrvEntry

zhoneCpeCondDhcpSrvEntry		1.3.6.1.4.1.5504.5.16.1.33.2.1
Row inf the conditional DHCP server table
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeCondDhcpSrvEntry

zhoneCpeCondDhcpSrvEntryIndex		1.3.6.1.4.1.5504.5.16.1.33.2.1.1
The entry index within the conditional DHCP server list
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

zhoneCpeCondDhcpSrvRowStatus		1.3.6.1.4.1.5504.5.16.1.33.2.1.2
The row status for adding and deleting rows.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zhoneCpeCondDhcpSrvAdminState		1.3.6.1.4.1.5504.5.16.1.33.2.1.3
Enable/disable this rule. Disabling allows rule to be temporarily unavailable for testing or debug purposes.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeCondDhcpSrvPriorityOrder		1.3.6.1.4.1.5504.5.16.1.33.2.1.4
When multiple Conditional DHCP Rules are applied to the same physical port and an ingress packet matches more than one rule, the rule with the highest Priority will be applied. The default priority is for rules to be applied in the order created.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

zhoneCpeCondDhcpVciOui		1.3.6.1.4.1.5504.5.16.1.33.2.1.5
This field is for Vendor Class Identifier (Option 60) or Organizationally Unique Identifier. Conditional DHCP Rules classify ingress packets based on a matching OUI, or based on a matching DHCP Option 60 string value. OUI is the first 3 bytes of a MAC, separated by colons (e.g. 00:02:71). VCI is the text string included in the Option 60. When an attached device sends a DHCP Discover packet to request a dynamically assigned IP Address, it may include this Option 60 string to identify what type of device it is.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminString

zhoneCpeCondDhcpSrvVciMatch		1.3.6.1.4.1.5504.5.16.1.33.2.1.6
VCI, the Option 60 String included in the DHCP Discover packet, may be up to 255 characters long, while the vci-oui field supports a maximum of 32 characters. This configuration option specifies where to look in the entire Option 60 string for a match. Choices are at the beginning (Prefix), at the end (Suffix), or anywhere in the string (Substring).
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	prefix(1), suffix(2), substring(3)

zhoneCpeCondDhcpSrvStartAddr		1.3.6.1.4.1.5504.5.16.1.33.2.1.7
Starting IP Address for the subnet range associated with this rule. Must be in the same subnet as the LAN IP Interface for this VLAN. Every Conditional DHCP Rule should have a unique range of IP Addresses within the LAN Subnet (non-overlapping).
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zhoneCpeCondDhcpSrvEndAddr		1.3.6.1.4.1.5504.5.16.1.33.2.1.8
Last ip address associated with this rule.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zhoneCpeCondDhcpSrvWanVlan		1.3.6.1.4.1.5504.5.16.1.33.2.1.9
VLAN ID of the WAN interface that shall be used as the default forwarding path for all packets received with an IP address in this subnet. This feature enables automatic forwarding of packets sourced by a Conditional DHCP Client device to a different Default Gateway (based on the VLAN ID).
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..4096

zhoneCpeCondDhcpSrvPortFwdRule		1.3.6.1.4.1.5504.5.16.1.33.2.1.10
When enabled, a Static Port Forwarding Firewall Rule will automatically be created for each client device assigned an IP Address based on this rule.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeCondDhcpSrvStartPort		1.3.6.1.4.1.5504.5.16.1.33.2.1.11
WAN-side Port Number of the Port Forwarding Rule that will be automatically created for the Conditional DHCP client assigned the Starting IP Address defined for this rule. The WAN-side Port Number will increment by 1 for each new client device.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

zhoneCpeCondDhcpSrvPrivatePort		1.3.6.1.4.1.5504.5.16.1.33.2.1.12
The LAN-side Port Number of the Port Forwarding Rule that will be bound to the private IP Address assigned to each client. This Port Number is typically assigned based on the application that the Port Forwarding Rule will be used for. For example, if the Rule will be used to enable on-demand SSH connections to client devices with conditional IP Addresses, then the Private Port will be 22.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

zhoneCpeCondDhcpSrvProtocol		1.3.6.1.4.1.5504.5.16.1.33.2.1.13
Defines what type of packets will be allowed through the Static Port Forwarding Rule.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	tcp(1), udp(2), both(3)

zhoneCpeCondDhcpSrvPriDns		1.3.6.1.4.1.5504.5.16.1.33.2.1.14
Defines the Option 6 Primary DNS IP Addresses that will be included in the DHCP Offer to Conditional DHCP client devices matching this rule.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zhoneCpeCondDhcpSrvSecDns		1.3.6.1.4.1.5504.5.16.1.33.2.1.15
Defines the Option 6 Secondary DNS IP Addresses that will be included in the DHCP Offer to Conditional DHCP client devices matching this rule.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zhoneCpeCondDhcpSrvPriNpt		1.3.6.1.4.1.5504.5.16.1.33.2.1.16
Defines the Option 42 Primary NTP IP Addresses that will be included in the DHCP Offer to Conditional DHCP client devices matching this rule. NOTE that Option 2 (Timezone Offset) will also be included in the DHCP Offer. The Option 2 value will be automatically populated by the ONT, based on what it was assigned on an uplink interface with DHCP client enabled.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zhoneCpeCondDhcpSrvSecNpt		1.3.6.1.4.1.5504.5.16.1.33.2.1.17
Defines the Option 42 Secondary NTP IP Addresses that will be included in the DHCP Offer to Conditional DHCP client devices matching this rule.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zhoneCpeCondDhcpSrvVsi		1.3.6.1.4.1.5504.5.16.1.33.2.1.18
Vendor Specific Information (Option 43) is a user-configured text string of up to 32 characters with no restrictions on format or content. Required by some DHCP client devices for specific applications and/or boot up procedures.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminString

zhoneCpeCondDhcpSrvPermanent		1.3.6.1.4.1.5504.5.16.1.33.2.1.19
When enabled, IP Addresses are permanently bound to the MAC address of the device they are assigned to. DHCP Lease table will show permanent entries for each host.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeCmd		1.3.6.1.4.1.5504.5.16.1.34
OBJECT IDENTIFIER

zhoneCpeCmdOperation		1.3.6.1.4.1.5504.5.16.1.34.1
The Command operation to be performed. The command operation will determine which of the other zhoneCpeCmd objects will be used. The DELETE commands delete configuration. The MOVE commands copy configuration from source to destination. Source configuration is deleted. The CLONE commands copy configuration from source to destination. Source configuration is perserved. Destination configuration befor clone operation is deleted. The APPLY commands copy configuration from source to destination. Source configuration is perserved. Destination configuration prior to appy operation is preserved.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	deleteSlot(1), deletePort(2), deleteCpe(3), deleteUni(4), deleteService(5), moveSlotToSlot(10), movePortToPort(11), moveCpeToCpe(12), moveUniToUni(13), moveServiceToService(15), cloneSlotToSlot(20), clonePortToPort(21), cloneCpeToCpe(22), cloneUniToUni(23), cloneServiceToService(24), cloneCpeToSlot(25), cloneCpeToPort(26), applyCpeToSlot(40), applyCpeToPort(41), applyCpeToCpe(42), createVirtualCpe(60), deleteVirtualCpe(61), applySvcToCpe(70), removeSvcFromCpe(80)

zhoneCpeCmdSrcIfIndex		1.3.6.1.4.1.5504.5.16.1.34.2
Command SOURCE ifIndex. Using this object overwrites source shelf/slot/port/subPort objects. This object must be used for virtual CPEs.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

zhoneCpeCmdSrcShelf		1.3.6.1.4.1.5504.5.16.1.34.3
Command SOURCE shelf
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

zhoneCpeCmdSrcSlot		1.3.6.1.4.1.5504.5.16.1.34.4
Command SOURCE slot
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

zhoneCpeCmdSrcPort		1.3.6.1.4.1.5504.5.16.1.34.5
Command SOURCE port.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

zhoneCpeCmdSrcSubport		1.3.6.1.4.1.5504.5.16.1.34.6
Command SOURCE subPort.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

zhoneCpeCmdSrcTpType		1.3.6.1.4.1.5504.5.16.1.34.7
Command SOURCE tpType.
Status: current	Access: read-write
OBJECT-TYPE
	TpType

zhoneCpeCmdSrcTpIndex		1.3.6.1.4.1.5504.5.16.1.34.8
Command SOURCE tpIndex
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

zhoneCpeCmdDstIfIndex		1.3.6.1.4.1.5504.5.16.1.34.9
Command DESTINATION ifIndex. Using this object overwrites destination shelf/slot/port/subPort objects. This object must be used for virtual CPEs.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

zhoneCpeCmdDstShelf		1.3.6.1.4.1.5504.5.16.1.34.10
Command DESTINATION shelf
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

zhoneCpeCmdDstSlot		1.3.6.1.4.1.5504.5.16.1.34.11
Command DESTINATION slot
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

zhoneCpeCmdDstPort		1.3.6.1.4.1.5504.5.16.1.34.12
Command DESTINATION port.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

zhoneCpeCmdDstSubport		1.3.6.1.4.1.5504.5.16.1.34.13
Command DESTINATION subPort.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

zhoneCpeCmdDstTpType		1.3.6.1.4.1.5504.5.16.1.34.14
Command DESTINATION tpType.
Status: current	Access: read-write
OBJECT-TYPE
	TpType

zhoneCpeCmdDstTpIndex		1.3.6.1.4.1.5504.5.16.1.34.15
Command DESTINATION tpIndex
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

zhoneCpeCmdString		1.3.6.1.4.1.5504.5.16.1.34.16
General purpose string parameter. Used to specify names or other string values.
Status: current	Access: read-write
OBJECT-TYPE
	ZhoneAdminString

zhoneCpeCmdSvcTemplateType		1.3.6.1.4.1.5504.5.16.1.34.17
Command cpe service template type.
Status: current	Access: read-write
OBJECT-TYPE
	ZhoneCpeTemplateType

zhoneCpeCmdSvcTemplateId		1.3.6.1.4.1.5504.5.16.1.34.18
Command cpe service template indentification.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

zhoneCpeCmdSvcTemplateIfIndex		1.3.6.1.4.1.5504.5.16.1.34.19
Command cpe service template destintation CPE ifIndex.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

zhoneCpeCmdSvcTemplateVirtualConn		1.3.6.1.4.1.5504.5.16.1.34.20
Command cpe service template source CPE ifIndex. Also known as the virutal CPE ifIndex.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

zhoneCpeCmdSvcTemplateTpType		1.3.6.1.4.1.5504.5.16.1.34.21
Command cpe service tpType. A zero value means all TpTypes on the destination CPE.
Status: current	Access: read-write
OBJECT-TYPE
	TpType

zhoneCpeCmdSvcTemplateTpIndex		1.3.6.1.4.1.5504.5.16.1.34.22
Command cpe service DESTINATION tpIndex. A zero value means all UNI ports of the destination CPE.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

zhoneCpeCmdSvcTemplateVlan		1.3.6.1.4.1.5504.5.16.1.34.23
Command cpe service VLAN, consisting of vlan cos (high order 16 bits) and vlan ID (low order 16 bits).
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

zhoneCpeCmdSvcTemplateSlan		1.3.6.1.4.1.5504.5.16.1.34.24
Command cpe service SLAN, consisting of slan cos (high order 16 bits) and slan ID (low order 16 bits).
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

zhoneCpeCmdOverrideTpIndex		1.3.6.1.4.1.5504.5.16.1.34.25
If set, use this as the uni number to which the service on the target CPE is applied.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

zhoneCpeCmdOverrideVlanId		1.3.6.1.4.1.5504.5.16.1.34.26
If set, use this vlanId on the destination CPE.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

zhoneCpeCmdOverrideVlanCos		1.3.6.1.4.1.5504.5.16.1.34.27
If set, use this value as the vlan cos on the destination CPE.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

zhoneCpeCmdOverrideSlanId		1.3.6.1.4.1.5504.5.16.1.34.28
If set, use this slanId on the destination CPE.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

zhoneCpeCmdOverrideSlanCos		1.3.6.1.4.1.5504.5.16.1.34.29
If set, use this slan cos on the destination CPE.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

zhoneCpeLldpMedPolicyList		1.3.6.1.4.1.5504.5.16.1.35
Link Layer Discovery Protocol MED network policy list objects
Status: current	Access: read-write
OBJECT-IDENTITY

zhoneCpeLldpMedPolicyListIndexNext		1.3.6.1.4.1.5504.5.16.1.35.1
This object contains an appropriate value to be used for the zhoneCpeLldpMedPolicyListIndex when creating entries in the zhoneCpeLldpMedPolicyListTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeLldpMedPolicyListIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zhoneCpeLldpMedPolicyListTable		1.3.6.1.4.1.5504.5.16.1.35.2
Table in which each entry is a list of LLDP-MED network policy rules.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeLldpMedPolicyListEntry

zhoneCpeLldpMedPolicyListEntry		1.3.6.1.4.1.5504.5.16.1.35.2.1
Row in LLDP-MED network policy list table
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeLldpMedPolicyListEntry

zhoneCpeLldpMedPolicyListIndex		1.3.6.1.4.1.5504.5.16.1.35.2.1.1
This represents the CPE LLDP-MED network policy index value.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

zhoneCpeLldpMedPolicyListRowStatus		1.3.6.1.4.1.5504.5.16.1.35.2.1.2
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zhoneCpeLldpMedPolicyListProfileName		1.3.6.1.4.1.5504.5.16.1.35.2.1.3
Profile name for this cpe-lldp-med-policy-list profile. This must be unique, and is writable only on creation.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminString

zhoneCpeLldpMedPolicy		1.3.6.1.4.1.5504.5.16.1.36
Link Layer Discover Protocol MED network policy objects
Status: current	Access: read-create
OBJECT-IDENTITY

zhoneCpeLldpMedPolicyIndexTable		1.3.6.1.4.1.5504.5.16.1.36.1
Table of next available indexes for each LLDP-MED network policy.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeLldpMedPolicyIndexEntry

zhoneCpeLldpMedPolicyIndexEntry		1.3.6.1.4.1.5504.5.16.1.36.1.1
Row in the zhoneCpeLldpMedPolicyIndex table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeLldpMedPolicyIndexEntry

zhoneCpeLldpMedPolicyIndexEntryIndexNext		1.3.6.1.4.1.5504.5.16.1.36.1.1.1
Next available entry index for row in zhoneCpeLldpMedPolicyTable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zhoneCpeLldpMedPolicyTable		1.3.6.1.4.1.5504.5.16.1.36.2
The table of Cpe Lldp Med Policy entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeLldpMedPolicyEntry

zhoneCpeLldpMedPolicyEntry		1.3.6.1.4.1.5504.5.16.1.36.2.1
A row in the Cpe Lldp Med Policy table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeLldpMedPolicyEntry

zhoneCpeLldpMedPolicyEntryIndex		1.3.6.1.4.1.5504.5.16.1.36.2.1.1
The entry index within the LLDP-MED network policy list
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

zhoneCpeLldpMedPolicyRowStatus		1.3.6.1.4.1.5504.5.16.1.36.2.1.2
Used to create, modify or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zhoneCpeLldpMedPolicyAdminState		1.3.6.1.4.1.5504.5.16.1.36.2.1.3
Enable/disable the network policy.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeLldpMedPolicyAppType		1.3.6.1.4.1.5504.5.16.1.36.2.1.4
The media type that defines the primary function of the application for the policy advertised by an endpoint.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	voice(1), voicesignal(2), guestvoice(3), guestvoicesignal(4), softphone(5), videoconf(6), videostreaming(7), videosignal(8)

zhoneCpeLldpMedPolicyVlanId		1.3.6.1.4.1.5504.5.16.1.36.2.1.5
The VLAN ID of the application for the policy advertised by an endpoint.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..4096

zhoneCpeLldpMedPolicyCos		1.3.6.1.4.1.5504.5.16.1.36.2.1.6
The Class-Of-Service of the application for the policy advertised by an endpoint.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..8

zhoneCpeLldpMedPolicyDscp		1.3.6.1.4.1.5504.5.16.1.36.2.1.7
This parameter indicates DSCP value for cpe lldp med policy traffic. Valid code values: <0-63> Differentiated services codepoint value af11 Mark packets with AF11 dscp (001010) af12 Mark packets with AF12 dscp (001100) af13 Mark packets with AF13 dscp (001110) af21 Mark packets with AF21 dscp (010010) af22 Mark packets with AF22 dscp (010100) af23 Mark packets with AF23 dscp (010110) af31 Mark packets with AF31 dscp (011010) af32 Mark packets with AF32 dscp (011100) af33 Mark packets with AF33 dscp (011110) af41 Mark packets with AF41 dscp (100010) af42 Mark packets with AF42 dscp (100100) af43 Mark packets with AF43 dscp (100110) cs1 Mark packets with CS1(precedence 1) dscp (001000) cs2 Mark packets with CS2(precedence 2) dscp (010000) cs3 Mark packets with CS3(precedence 3) dscp (011000) cs4 Mark packets with CS4(precedence 4) dscp (100000) cs5 Mark packets with CS5(precedence 5) dscp (101000) cs6 Mark packets with CS6(precedence 6) dscp (110000) cs7 Mark packets with CS7(precedence 7) dscp (111000) default Mark packets with default dscp (000000) ef Mark packets with EF dscp (101110)
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(1..8)

zhoneCpeAutoCfgRule		1.3.6.1.4.1.5504.5.16.1.37
Rule for selecting template to apply for CPE auto-configuration.
Status: current	Access: read-create
OBJECT-IDENTITY

zhoneCpeAutoCfgRuleIndexNext		1.3.6.1.4.1.5504.5.16.1.37.1
Next available entry in zhoneCpeAutoCfgRuleTable.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

zhoneCpeAutoCfgRuleTable		1.3.6.1.4.1.5504.5.16.1.37.2
Table of rules for selecting templates to apply in auto-configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneCpeAutoCfgRuleEntry

zhoneCpeAutoCfgRuleEntry		1.3.6.1.4.1.5504.5.16.1.37.2.1
Row in the auto-config rule table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneCpeAutoCfgRuleEntry

zhoneCpeAutoCfgRuleIndex		1.3.6.1.4.1.5504.5.16.1.37.2.1.1
This represents the index in the auto-cfg-rule table.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

zhoneCpeAutoCfgRuleAdminState		1.3.6.1.4.1.5504.5.16.1.37.2.1.2
If down, this rule will not participate in rule matching.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminState

zhoneCpeAutoCfgRulePriority		1.3.6.1.4.1.5504.5.16.1.37.2.1.3
1 is the lowest priority. When conflicting rules match, the one with the hightest priority is used.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..2147483647

zhoneCpeAutoCfgRuleMatchExpression		1.3.6.1.4.1.5504.5.16.1.37.2.1.4
Logical expression telling which CPEs should be configured according to this rule. elements are: keyword followed by value. Multiple elements can be connected with AND. Keywords are: model - specified model ID slot - specifies slot number or numbers olt - specifies GPON OLT number or numbers example: model 2426 AND slot 6 AND olt 1-4,7 In this example, apply to model 2426 discovered on olts 1, 2, 3, 4, or 7 on slot 6.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..256)

zhoneCpeAutoCfgRuleServiceTemplate		1.3.6.1.4.1.5504.5.16.1.37.2.1.5
The ifIndex of the virtual ONU supplying the service template for this rule.
Status: current	Access: read-create
OBJECT-TYPE
	InterfaceIndex

zhoneCpeAutoCfgRuleTargetUni		1.3.6.1.4.1.5504.5.16.1.37.2.1.6
Which unis from the template should be applied by this rule. This consists of a uni type followed by one or more uni numbers, separated by commas, or with ranges indicated by '-'. The word 'all' may be used to indicate all ports of that type. example: eth 1-3 In this example, apply services on the provisioned ethernet port on the service template to ethernet ports 1, 2, and 3 of the matched CPE. If this field is blank, then the entire service template is applied to the CPE.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..32)

zhoneCpeAutoCfgRuleDeleteBeforeApply		1.3.6.1.4.1.5504.5.16.1.37.2.1.7
If true, any existing services on the target unis are removed prior to applying the service template. If the targetUni field is blank and this field is true, then all services on the CPE are removed before the service template is applied.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

zhoneCpeAutoCfgRuleRowStatus		1.3.6.1.4.1.5504.5.16.1.37.2.1.8
Use to create, modify, or delete a row in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneCpeAutoCfgRuleProfileName		1.3.6.1.4.1.5504.5.16.1.37.2.1.9
The profile name of the rule.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneAdminString

zhoneCpeCfgGlobalSettings		1.3.6.1.4.1.5504.5.16.1.38
System-wide settings for CPE config.
Status: current	Access: read-create
OBJECT-IDENTITY

zhoneCpeCfgAutoAssign		1.3.6.1.4.1.5504.5.16.1.38.1
Automatically assign ONU IDs to discovered ONU serial numbers.
Status: current	Access: read-write
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeCfgAutoConfig		1.3.6.1.4.1.5504.5.16.1.38.2
When an ONU is auto-assigned, provision that ONU based on the matching auto config rule.
Status: current	Access: read-write
OBJECT-TYPE
	ZhoneEnabledFlag

zhoneCpeCfgParamsStr		1.3.6.1.4.1.5504.5.16.1.38.3
Spare field for temporary parameters.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..256)

zhoneCpeSipDialPlanGroup		1.3.6.1.4.1.5504.9.1.36
Cpe Sip Dial Plan Table objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeVoipServerGroup		1.3.6.1.4.1.5504.9.1.37
Cpe Voip Server Table objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeIpGroup		1.3.6.1.4.1.5504.9.1.38
Cpe Ip Table objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeIpServerGroup		1.3.6.1.4.1.5504.9.1.39
Cpe Ip Server objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeVoipFeaturesGroup		1.3.6.1.4.1.5504.9.1.40
Cpe Voip Features Table objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeVoipMediaGroup		1.3.6.1.4.1.5504.9.1.41
Cpe Voip Media Table objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeVoipSubscriberGroup		1.3.6.1.4.1.5504.9.1.42
Cpe Voip Subscriber Table objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeEthSubscriberGroup		1.3.6.1.4.1.5504.9.1.43
Cpe Eth Subscriber Table objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeVideoGroup		1.3.6.1.4.1.5504.9.1.44
Cpe Video Table objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeVideoAccessControlGroup		1.3.6.1.4.1.5504.9.1.45
Cpe Video Access Control List Table objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpePweSubscriberGroup		1.3.6.1.4.1.5504.9.1.46
Cpe Pwe Subscriber Table objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpePweGroup		1.3.6.1.4.1.5504.9.1.47
Cpe Pwe Table objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeOnuModelInfoGroup		1.3.6.1.4.1.5504.9.1.48
Cpe Onu ModelInfo Table objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeConnectionGroup		1.3.6.1.4.1.5504.9.1.49
Cpe connection table objects
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeRfSubscriberGroup		1.3.6.1.4.1.5504.9.1.50
Cpe RF Subscriber table objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeTrafficManagementGroup		1.3.6.1.4.1.5504.9.1.51
Cpe Traffic Management table objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeSystemGroup		1.3.6.1.4.1.5504.9.1.53
Cpe System table objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeSystemCommonGroup		1.3.6.1.4.1.5504.9.1.54
Cpe Systen Common table objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeInterfaceVlanGroup		1.3.6.1.4.1.5504.9.1.55
Cpe Interface Vlan table objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeDhcpServerGroup		1.3.6.1.4.1.5504.9.1.56
Cpe Dhcp Server table objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpePppoeGroup		1.3.6.1.4.1.5504.9.1.57
Cpe Pppoe table objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeWlanSubscriberGroup		1.3.6.1.4.1.5504.9.1.58
Cpe Wlan Subscriber table objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeWlanGroup		1.3.6.1.4.1.5504.9.1.59
Cpe Wlan table objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeStaticRouteListGroup		1.3.6.1.4.1.5504.9.1.60
Cpe Static Route List table objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeStaticRouteGroup		1.3.6.1.4.1.5504.9.1.61
Cpe Static Route table objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpePortFwdListGroup		1.3.6.1.4.1.5504.9.1.62
Cpe Port Fwd List table objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpePortFwdGroup		1.3.6.1.4.1.5504.9.1.63
Cpe Port Fwd table objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeServiceApplicationGroup		1.3.6.1.4.1.5504.9.1.64
Description.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeDnsHostListGroup		1.3.6.1.4.1.5504.9.1.65
Cpe Dns Host List objects
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeDnsHostGroup		1.3.6.1.4.1.5504.9.1.66
Cpe Dns Host Objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeWlanAdvGroup		1.3.6.1.4.1.5504.9.1.67
Cpe Wlan Advanced table objects.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeCondDhcpSrvListGroup		1.3.6.1.4.1.5504.9.1.68
Cpe Conditional DHCP server list objects
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeCondDhcpSrvGroup		1.3.6.1.4.1.5504.9.1.69
Cpe Conditional DHCP server objects
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeCmdGroup		1.3.6.1.4.1.5504.9.1.70
CPE command objects
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeLldpMedPolicyListGroup		1.3.6.1.4.1.5504.9.1.71
Cpe LLDP-MED network policy list objects
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeLldpMedPolicyGroup		1.3.6.1.4.1.5504.9.1.72
Cpe LLDP-MED network policy objects
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeAutoCfgRuleGroup		1.3.6.1.4.1.5504.9.1.73
Description.
Status: current	Access: read-write
OBJECT-GROUP

zhoneCpeCfgGlobalSettingsGroup		1.3.6.1.4.1.5504.9.1.74
Description.
Status: current	Access: read-write
OBJECT-GROUP