CAIWINA3-MIB

File: CAIWINA3-MIB.mib (864149 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212
RFC-1215

Imported symbols

enterprises IpAddress Counter
Gauge TimeTicks PhysAddress
DisplayString OBJECT-TYPE TRAP-TYPE

Defined Types

KBytes  
INTEGER 0..2147483647    

WinA3ConfigLVolAutoEntry  
SEQUENCE    
  winA3ConfigLVolAutoWatcherName DisplayString
  winA3ConfigLVolAutoName DisplayString
  winA3ConfigLVolAutoMounts DisplayString
  winA3ConfigLVolAutoInfo DisplayString
  winA3ConfigLVolAutoClusterType INTEGER
  winA3ConfigLVolAutoDescription DisplayString
  winA3ConfigLVolAutoWatcherMatchType INTEGER
  winA3ConfigLVolAutoWatcherLimit INTEGER
  winA3ConfigLVolAutoWatcherLastMatched INTEGER
  winA3ConfigLVolAutoAggLag INTEGER
  winA3ConfigLVolAutoSizeWarn DisplayString
  winA3ConfigLVolAutoSizeCrit DisplayString
  winA3ConfigLVolAutoSizeMonitor INTEGER
  winA3ConfigLVolAutoSizeDWarn DisplayString
  winA3ConfigLVolAutoSizeDCrit DisplayString
  winA3ConfigLVolAutoSizeDMonitor INTEGER
  winA3ConfigLVolAutoMiscMode INTEGER
  winA3ConfigLVolAutoMiscWarn DisplayString
  winA3ConfigLVolAutoMiscCrit DisplayString
  winA3ConfigLVolAutoMiscMonitor INTEGER
  winA3ConfigLVolAutoFragmtMode INTEGER
  winA3ConfigLVolAutoFragmtInterval INTEGER
  winA3ConfigLVolAutoFragmtWarn INTEGER
  winA3ConfigLVolAutoFragmtCrit INTEGER
  winA3ConfigLVolAutoFragmtMonitor INTEGER
  winA3ConfigLVolAutoLossAction INTEGER
  winA3ConfigLVolAutoButton INTEGER

WinA3ConfigMntAutoEntry  
SEQUENCE    
  winA3ConfigMntAutoWatcherName DisplayString
  winA3ConfigMntAutoName DisplayString
  winA3ConfigMntAutoTarget DisplayString
  winA3ConfigMntAutoClusterType INTEGER
  winA3ConfigMntAutoDescription DisplayString
  winA3ConfigMntAutoWatcherMatchType INTEGER
  winA3ConfigMntAutoWatcherLimit INTEGER
  winA3ConfigMntAutoWatcherLastMatched INTEGER
  winA3ConfigMntAutoAggLag INTEGER
  winA3ConfigMntAutoTargetMonitor INTEGER
  winA3ConfigMntAutoLossAction INTEGER
  winA3ConfigMntAutoButton INTEGER

WinA3ConfigDfsAutoEntry  
SEQUENCE    
  winA3ConfigDfsAutoWatcherName DisplayString
  winA3ConfigDfsAutoName DisplayString
  winA3ConfigDfsAutoTargetsList DisplayString
  winA3ConfigDfsAutoDescription DisplayString
  winA3ConfigDfsAutoWatcherMatchType INTEGER
  winA3ConfigDfsAutoWatcherLimit INTEGER
  winA3ConfigDfsAutoWatcherLastMatched INTEGER
  winA3ConfigDfsAutoAggLag INTEGER
  winA3ConfigDfsAutoTargetsWarn INTEGER
  winA3ConfigDfsAutoTargetsCrit INTEGER
  winA3ConfigDfsAutoTargetsMonitor INTEGER
  winA3ConfigDfsAutoLossAction INTEGER
  winA3ConfigDfsAutoButton INTEGER

WinA3ConfigQuotaAutoEntry  
SEQUENCE    
  winA3ConfigQuotaAutoWatcherName DisplayString
  winA3ConfigQuotaAutoLVolName DisplayString
  winA3ConfigQuotaAutoUserName DisplayString
  winA3ConfigQuotaAutoWarnLevel DisplayString
  winA3ConfigQuotaAutoLimit DisplayString
  winA3ConfigQuotaAutoDescription DisplayString
  winA3ConfigQuotaAutoWatcherMatchType INTEGER
  winA3ConfigQuotaAutoWatcherLimit INTEGER
  winA3ConfigQuotaAutoWatcherLastMatched INTEGER
  winA3ConfigQuotaAutoAggLag INTEGER
  winA3ConfigQuotaAutoSizeWarn DisplayString
  winA3ConfigQuotaAutoSizeCrit DisplayString
  winA3ConfigQuotaAutoSizeMonitor INTEGER
  winA3ConfigQuotaAutoLossAction INTEGER
  winA3ConfigQuotaAutoButton INTEGER

WinA3ConfigSrvcAutoEntry  
SEQUENCE    
  winA3ConfigSrvcAutoWatcherName DisplayString
  winA3ConfigSrvcAutoName DisplayString
  winA3ConfigSrvcAutoDisplayName DisplayString
  winA3ConfigSrvcAutoStartupType INTEGER
  winA3ConfigSrvcAutoAccount DisplayString
  winA3ConfigSrvcAutoExecutable DisplayString
  winA3ConfigSrvcAutoClusterType INTEGER
  winA3ConfigSrvcAutoDescription DisplayString
  winA3ConfigSrvcAutoWatcherMatchType INTEGER
  winA3ConfigSrvcAutoWatcherLimit INTEGER
  winA3ConfigSrvcAutoWatcherLastMatched INTEGER
  winA3ConfigSrvcAutoAggLag INTEGER
  winA3ConfigSrvcAutoConfigMonitor INTEGER
  winA3ConfigSrvcAutoActivePolicy INTEGER
  winA3ConfigSrvcAutoActiveMonitor INTEGER
  winA3ConfigSrvcAutoExistPolicy INTEGER
  winA3ConfigSrvcAutoExistMonitor INTEGER
  winA3ConfigSrvcAutoButton INTEGER

WinA3ConfigJobAutoEntry  
SEQUENCE    
  winA3ConfigJobAutoWatcherName DisplayString
  winA3ConfigJobAutoName DisplayString
  winA3ConfigJobAutoDescription DisplayString
  winA3ConfigJobAutoWatcherMatchType INTEGER
  winA3ConfigJobAutoWatcherLimit INTEGER
  winA3ConfigJobAutoWatcherLastMatched INTEGER
  winA3ConfigJobAutoAggLag INTEGER
  winA3ConfigJobAutoProcsMin INTEGER
  winA3ConfigJobAutoProcsMax INTEGER
  winA3ConfigJobAutoProcsMonitor INTEGER
  winA3ConfigJobAutoSizeWarn DisplayString
  winA3ConfigJobAutoSizeCrit DisplayString
  winA3ConfigJobAutoSizeMonitor INTEGER
  winA3ConfigJobAutoCpuInterval DisplayString
  winA3ConfigJobAutoCpuWarn DisplayString
  winA3ConfigJobAutoCpuCrit DisplayString
  winA3ConfigJobAutoCpuMonitor INTEGER
  winA3ConfigJobAutoLossAction INTEGER
  winA3ConfigJobAutoButton INTEGER

WinA3ConfigPrnAutoEntry  
SEQUENCE    
  winA3ConfigPrnAutoWatcherName DisplayString
  winA3ConfigPrnAutoName DisplayString
  winA3ConfigPrnAutoDescription DisplayString
  winA3ConfigPrnAutoWatcherMatchType INTEGER
  winA3ConfigPrnAutoWatcherLimit INTEGER
  winA3ConfigPrnAutoWatcherLastMatched INTEGER
  winA3ConfigPrnAutoAggLag INTEGER
  winA3ConfigPrnAutoEventMonitor INTEGER
  winA3ConfigPrnAutoQueueWarn INTEGER
  winA3ConfigPrnAutoQueueCrit INTEGER
  winA3ConfigPrnAutoQueueMonitor INTEGER
  winA3ConfigPrnAutoLossAction INTEGER
  winA3ConfigPrnAutoButton INTEGER

WinA3ConfigHardwrAutoEntry  
SEQUENCE    
  winA3ConfigHardwrAutoWatcherName DisplayString
  winA3ConfigHardwrAutoResName DisplayString
  winA3ConfigHardwrAutoResSubName DisplayString
  winA3ConfigHardwrAutoInstName DisplayString
  winA3ConfigHardwrAutoDescription DisplayString
  winA3ConfigHardwrAutoWatcherMatchType INTEGER
  winA3ConfigHardwrAutoWatcherLimit INTEGER
  winA3ConfigHardwrAutoWatcherLastMatched INTEGER
  winA3ConfigHardwrAutoErrorMsgPattern DisplayString
  winA3ConfigHardwrAutoErrorMsgMonitor INTEGER
  winA3ConfigHardwrAutoResultLag INTEGER
  winA3ConfigHardwrAutoResultWarnMin DisplayString
  winA3ConfigHardwrAutoResultWarnMax DisplayString
  winA3ConfigHardwrAutoResultCritMin DisplayString
  winA3ConfigHardwrAutoResultCritMax DisplayString
  winA3ConfigHardwrAutoResultMonitor INTEGER
  winA3ConfigHardwrAutoLossAction INTEGER
  winA3ConfigHardwrAutoButton INTEGER

WinA3ConfigProgrmAutoEntry  
SEQUENCE    
  winA3ConfigProgrmAutoWatcherName DisplayString
  winA3ConfigProgrmAutoResName DisplayString
  winA3ConfigProgrmAutoResSubName DisplayString
  winA3ConfigProgrmAutoInstName DisplayString
  winA3ConfigProgrmAutoDescription DisplayString
  winA3ConfigProgrmAutoWatcherMatchType INTEGER
  winA3ConfigProgrmAutoWatcherLimit INTEGER
  winA3ConfigProgrmAutoWatcherLastMatched INTEGER
  winA3ConfigProgrmAutoErrorMsgPattern DisplayString
  winA3ConfigProgrmAutoErrorMsgMonitor INTEGER
  winA3ConfigProgrmAutoResultLag INTEGER
  winA3ConfigProgrmAutoResultWarnMin DisplayString
  winA3ConfigProgrmAutoResultWarnMax DisplayString
  winA3ConfigProgrmAutoResultCritMin DisplayString
  winA3ConfigProgrmAutoResultCritMax DisplayString
  winA3ConfigProgrmAutoResultMonitor INTEGER
  winA3ConfigProgrmAutoLossAction INTEGER
  winA3ConfigProgrmAutoButton INTEGER

WinA3StatusCPUEntry  
SEQUENCE    
  winA3StatusCPUName DisplayString
  winA3StatusCPUAggLagValue INTEGER
  winA3StatusCPUAggLag INTEGER
  winA3StatusCPUAggStatus INTEGER
  winA3StatusCPUType DisplayString
  winA3StatusCPULoadValue DisplayString
  winA3StatusCPULoadWarnMin DisplayString
  winA3StatusCPULoadWarnMax DisplayString
  winA3StatusCPULoadCritMin DisplayString
  winA3StatusCPULoadCritMax DisplayString
  winA3StatusCPULoadMonitor INTEGER
  winA3StatusCPULoadStatus INTEGER
  winA3StatusCPUQueueValue DisplayString
  winA3StatusCPUQueueWarn DisplayString
  winA3StatusCPUQueueCrit DisplayString
  winA3StatusCPUQueueMonitor INTEGER
  winA3StatusCPUQueueStatus INTEGER
  winA3StatusCPULossAction INTEGER
  winA3StatusCPULossStatus INTEGER
  winA3StatusCPUCallBackRef DisplayString

WinA3StatusLVolEntry  
SEQUENCE    
  winA3StatusLVolName DisplayString
  winA3StatusLVolDescription DisplayString
  winA3StatusLVolAutoWatcherName DisplayString
  winA3StatusLVolAggLagValue INTEGER
  winA3StatusLVolAggLag INTEGER
  winA3StatusLVolAggStatus INTEGER
  winA3StatusLVolMounts DisplayString
  winA3StatusLVolInfo DisplayString
  winA3StatusLVolClusterType INTEGER
  winA3StatusLVolSizeTotal DisplayString
  winA3StatusLVolSizeValue DisplayString
  winA3StatusLVolSizeWarnValue DisplayString
  winA3StatusLVolSizeCritValue DisplayString
  winA3StatusLVolSizeWarn DisplayString
  winA3StatusLVolSizeCrit DisplayString
  winA3StatusLVolSizeMonitor INTEGER
  winA3StatusLVolSizeStatus INTEGER
  winA3StatusLVolSizeDValue DisplayString
  winA3StatusLVolSizeDWarnValue DisplayString
  winA3StatusLVolSizeDCritValue DisplayString
  winA3StatusLVolSizeDWarn DisplayString
  winA3StatusLVolSizeDCrit DisplayString
  winA3StatusLVolSizeDMonitor INTEGER
  winA3StatusLVolSizeDStatus INTEGER
  winA3StatusLVolMiscMode INTEGER
  winA3StatusLVolMiscValue DisplayString
  winA3StatusLVolMiscWarn DisplayString
  winA3StatusLVolMiscCrit DisplayString
  winA3StatusLVolMiscMonitor INTEGER
  winA3StatusLVolMiscStatus INTEGER
  winA3StatusLVolFragmtMode INTEGER
  winA3StatusLVolFragmtInterval INTEGER
  winA3StatusLVolFragmtValue INTEGER
  winA3StatusLVolFragmtWarn INTEGER
  winA3StatusLVolFragmtCrit INTEGER
  winA3StatusLVolFragmtMonitor INTEGER
  winA3StatusLVolFragmtStatus INTEGER
  winA3StatusLVolLossAction INTEGER
  winA3StatusLVolLossStatus INTEGER
  winA3StatusLVolCallBackRef DisplayString
  winA3StatusLVolButton INTEGER

WinA3StatusMntEntry  
SEQUENCE    
  winA3StatusMntName DisplayString
  winA3StatusMntDescription DisplayString
  winA3StatusMntAutoWatcherName DisplayString
  winA3StatusMntAggLagValue INTEGER
  winA3StatusMntAggLag INTEGER
  winA3StatusMntAggStatus INTEGER
  winA3StatusMntTarget DisplayString
  winA3StatusMntClusterType INTEGER
  winA3StatusMntTargetRef DisplayString
  winA3StatusMntTargetMonitor INTEGER
  winA3StatusMntTargetStatus INTEGER
  winA3StatusMntLossAction INTEGER
  winA3StatusMntLossStatus INTEGER
  winA3StatusMntCallBackRef DisplayString
  winA3StatusMntButton INTEGER

WinA3StatusDfsEntry  
SEQUENCE    
  winA3StatusDfsName DisplayString
  winA3StatusDfsDescription DisplayString
  winA3StatusDfsAutoWatcherName DisplayString
  winA3StatusDfsAggLagValue INTEGER
  winA3StatusDfsAggLag INTEGER
  winA3StatusDfsAggStatus INTEGER
  winA3StatusDfsTargetsList DisplayString
  winA3StatusDfsTargetsTotal INTEGER
  winA3StatusDfsTargetsValue INTEGER
  winA3StatusDfsTargetsWarn INTEGER
  winA3StatusDfsTargetsCrit INTEGER
  winA3StatusDfsTargetsMonitor INTEGER
  winA3StatusDfsTargetsStatus INTEGER
  winA3StatusDfsTargetsIds DisplayString
  winA3StatusDfsLossAction INTEGER
  winA3StatusDfsLossStatus INTEGER
  winA3StatusDfsCallBackRef DisplayString
  winA3StatusDfsButton INTEGER

WinA3StatusQuotaEntry  
SEQUENCE    
  winA3StatusQuotaLVolName DisplayString
  winA3StatusQuotaUserName DisplayString
  winA3StatusQuotaDescription DisplayString
  winA3StatusQuotaAutoWatcherName DisplayString
  winA3StatusQuotaAggLagValue INTEGER
  winA3StatusQuotaAggLag INTEGER
  winA3StatusQuotaAggStatus INTEGER
  winA3StatusQuotaWarnLevel DisplayString
  winA3StatusQuotaLimit DisplayString
  winA3StatusQuotaSizeTotal DisplayString
  winA3StatusQuotaSizeValue DisplayString
  winA3StatusQuotaSizeWarnValue DisplayString
  winA3StatusQuotaSizeCritValue DisplayString
  winA3StatusQuotaSizeWarn DisplayString
  winA3StatusQuotaSizeCrit DisplayString
  winA3StatusQuotaSizeMonitor INTEGER
  winA3StatusQuotaSizeStatus INTEGER
  winA3StatusQuotaLossAction INTEGER
  winA3StatusQuotaLossStatus INTEGER
  winA3StatusQuotaCallBackRef DisplayString
  winA3StatusQuotaButton INTEGER

WinA3StatusDirEntry  
SEQUENCE    
  winA3StatusDirWatcherName DisplayString
  winA3StatusDirName DisplayString
  winA3StatusDirRecursivePolicy INTEGER
  winA3StatusDirDescription DisplayString
  winA3StatusDirAggLagValue INTEGER
  winA3StatusDirAggLag INTEGER
  winA3StatusDirAggStatus INTEGER
  winA3StatusDirSizeTotal DisplayString
  winA3StatusDirSizeValue DisplayString
  winA3StatusDirSizeWarnMin DisplayString
  winA3StatusDirSizeWarnMax DisplayString
  winA3StatusDirSizeCritMin DisplayString
  winA3StatusDirSizeCritMax DisplayString
  winA3StatusDirSizeMonitor INTEGER
  winA3StatusDirSizeStatus INTEGER
  winA3StatusDirSizeDValue DisplayString
  winA3StatusDirSizeDWarnValue DisplayString
  winA3StatusDirSizeDCritValue DisplayString
  winA3StatusDirSizeDWarn DisplayString
  winA3StatusDirSizeDCrit DisplayString
  winA3StatusDirSizeDMonitor INTEGER
  winA3StatusDirSizeDStatus INTEGER
  winA3StatusDirEntriesValue DisplayString
  winA3StatusDirEntriesWarnMin DisplayString
  winA3StatusDirEntriesWarnMax DisplayString
  winA3StatusDirEntriesCritMin DisplayString
  winA3StatusDirEntriesCritMax DisplayString
  winA3StatusDirEntriesMonitor INTEGER
  winA3StatusDirEntriesStatus INTEGER
  winA3StatusDirTimeMode INTEGER
  winA3StatusDirTimeInterval INTEGER
  winA3StatusDirTimeValue DisplayString
  winA3StatusDirTimeRef DisplayString
  winA3StatusDirTimePolicy INTEGER
  winA3StatusDirTimeMonitor INTEGER
  winA3StatusDirTimeStatus INTEGER
  winA3StatusDirExistPolicy INTEGER
  winA3StatusDirExistMonitor INTEGER
  winA3StatusDirExistStatus INTEGER
  winA3StatusDirCallBackRef DisplayString
  winA3StatusDirButton INTEGER

WinA3StatusFileEntry  
SEQUENCE    
  winA3StatusFileWatcherName DisplayString
  winA3StatusFileMatchType INTEGER
  winA3StatusFileName DisplayString
  winA3StatusFileEvalPolicy INTEGER
  winA3StatusFileDescription DisplayString
  winA3StatusFileAggLagValue INTEGER
  winA3StatusFileAggLag INTEGER
  winA3StatusFileAggStatus INTEGER
  winA3StatusFileInstValue INTEGER
  winA3StatusFileInstMin INTEGER
  winA3StatusFileInstMax INTEGER
  winA3StatusFileInstMonitor INTEGER
  winA3StatusFileInstStatus INTEGER
  winA3StatusFileInstIds DisplayString
  winA3StatusFileSizeTotal DisplayString
  winA3StatusFileSizeMinValue DisplayString
  winA3StatusFileSizeMaxValue DisplayString
  winA3StatusFileSizeWarnMin DisplayString
  winA3StatusFileSizeWarnMax DisplayString
  winA3StatusFileSizeCritMin DisplayString
  winA3StatusFileSizeCritMax DisplayString
  winA3StatusFileSizeMonitor INTEGER
  winA3StatusFileSizeStatus INTEGER
  winA3StatusFileSizeIds DisplayString
  winA3StatusFileSizeDValue DisplayString
  winA3StatusFileSizeDWarnValue DisplayString
  winA3StatusFileSizeDCritValue DisplayString
  winA3StatusFileSizeDWarn DisplayString
  winA3StatusFileSizeDCrit DisplayString
  winA3StatusFileSizeDMonitor INTEGER
  winA3StatusFileSizeDStatus INTEGER
  winA3StatusFileSizeDIds DisplayString
  winA3StatusFileTimeMode INTEGER
  winA3StatusFileTimeInterval INTEGER
  winA3StatusFileTimeValue DisplayString
  winA3StatusFileTimeRef DisplayString
  winA3StatusFileTimePolicy INTEGER
  winA3StatusFileTimeMonitor INTEGER
  winA3StatusFileTimeStatus INTEGER
  winA3StatusFileTimeIds DisplayString
  winA3StatusFileCallBackRef DisplayString
  winA3StatusFileButton INTEGER

WinA3StatusProcEntry  
SEQUENCE    
  winA3StatusProcWatcherName DisplayString
  winA3StatusProcMatchType INTEGER
  winA3StatusProcName DisplayString
  winA3StatusProcPath DisplayString
  winA3StatusProcUser DisplayString
  winA3StatusProcClusterResGroup DisplayString
  winA3StatusProcEvalPolicy INTEGER
  winA3StatusProcDescription DisplayString
  winA3StatusProcAggLagValue INTEGER
  winA3StatusProcAggLag INTEGER
  winA3StatusProcAggStatus INTEGER
  winA3StatusProcClusterType INTEGER
  winA3StatusProcInstValue INTEGER
  winA3StatusProcInstMin INTEGER
  winA3StatusProcInstMax INTEGER
  winA3StatusProcInstMonitor INTEGER
  winA3StatusProcInstStatus INTEGER
  winA3StatusProcInstIds DisplayString
  winA3StatusProcSizeMinValue DisplayString
  winA3StatusProcSizeMaxValue DisplayString
  winA3StatusProcSizeWarnMin DisplayString
  winA3StatusProcSizeWarnMax DisplayString
  winA3StatusProcSizeCritMin DisplayString
  winA3StatusProcSizeCritMax DisplayString
  winA3StatusProcSizeMonitor INTEGER
  winA3StatusProcSizeStatus INTEGER
  winA3StatusProcSizeIds DisplayString
  winA3StatusProcCpuInterval DisplayString
  winA3StatusProcCpuMinValue DisplayString
  winA3StatusProcCpuMaxValue DisplayString
  winA3StatusProcCpuWarnMin DisplayString
  winA3StatusProcCpuWarnMax DisplayString
  winA3StatusProcCpuCritMin DisplayString
  winA3StatusProcCpuCritMax DisplayString
  winA3StatusProcCpuMonitor INTEGER
  winA3StatusProcCpuStatus INTEGER
  winA3StatusProcCpuIds DisplayString
  winA3StatusProcMiscMode INTEGER
  winA3StatusProcMiscMinValue DisplayString
  winA3StatusProcMiscMaxValue DisplayString
  winA3StatusProcMiscMin DisplayString
  winA3StatusProcMiscMax DisplayString
  winA3StatusProcMiscMonitor INTEGER
  winA3StatusProcMiscStatus INTEGER
  winA3StatusProcMiscIds DisplayString
  winA3StatusProcRestartPolicy INTEGER
  winA3StatusProcRestartMonitor INTEGER
  winA3StatusProcRestartStatus INTEGER
  winA3StatusProcRestartIds DisplayString
  winA3StatusProcCallBackRef DisplayString
  winA3StatusProcButton INTEGER

WinA3StatusSrvcEntry  
SEQUENCE    
  winA3StatusSrvcName DisplayString
  winA3StatusSrvcDescription DisplayString
  winA3StatusSrvcAutoWatcherName DisplayString
  winA3StatusSrvcAggLagValue INTEGER
  winA3StatusSrvcAggLag INTEGER
  winA3StatusSrvcAggStatus INTEGER
  winA3StatusSrvcDisplayName DisplayString
  winA3StatusSrvcStartupType INTEGER
  winA3StatusSrvcAccount DisplayString
  winA3StatusSrvcExecutable DisplayString
  winA3StatusSrvcClusterType INTEGER
  winA3StatusSrvcConfigValue DisplayString
  winA3StatusSrvcConfigRef DisplayString
  winA3StatusSrvcConfigMonitor INTEGER
  winA3StatusSrvcConfigStatus INTEGER
  winA3StatusSrvcActiveValue INTEGER
  winA3StatusSrvcActivePolicy INTEGER
  winA3StatusSrvcActiveMonitor INTEGER
  winA3StatusSrvcActiveStatus INTEGER
  winA3StatusSrvcExistPolicy INTEGER
  winA3StatusSrvcExistMonitor INTEGER
  winA3StatusSrvcExistStatus INTEGER
  winA3StatusSrvcCallBackRef DisplayString
  winA3StatusSrvcButton INTEGER

WinA3StatusJobEntry  
SEQUENCE    
  winA3StatusJobName DisplayString
  winA3StatusJobDescription DisplayString
  winA3StatusJobAutoWatcherName DisplayString
  winA3StatusJobAggLagValue INTEGER
  winA3StatusJobAggLag INTEGER
  winA3StatusJobAggStatus INTEGER
  winA3StatusJobProcsValue INTEGER
  winA3StatusJobProcsMin INTEGER
  winA3StatusJobProcsMax INTEGER
  winA3StatusJobProcsMonitor INTEGER
  winA3StatusJobProcsStatus INTEGER
  winA3StatusJobSizeValue DisplayString
  winA3StatusJobSizeWarn DisplayString
  winA3StatusJobSizeCrit DisplayString
  winA3StatusJobSizeMonitor INTEGER
  winA3StatusJobSizeStatus INTEGER
  winA3StatusJobCpuInterval DisplayString
  winA3StatusJobCpuValue DisplayString
  winA3StatusJobCpuWarnValue DisplayString
  winA3StatusJobCpuCritValue DisplayString
  winA3StatusJobCpuWarn DisplayString
  winA3StatusJobCpuCrit DisplayString
  winA3StatusJobCpuMonitor INTEGER
  winA3StatusJobCpuStatus INTEGER
  winA3StatusJobLossAction INTEGER
  winA3StatusJobLossStatus INTEGER
  winA3StatusJobCallBackRef DisplayString
  winA3StatusJobButton INTEGER

WinA3StatusSessEntry  
SEQUENCE    
  winA3StatusSessWatcherName DisplayString
  winA3StatusSessMatchType INTEGER
  winA3StatusSessClient DisplayString
  winA3StatusSessUser DisplayString
  winA3StatusSessEvalPolicy INTEGER
  winA3StatusSessDescription DisplayString
  winA3StatusSessAggLagValue INTEGER
  winA3StatusSessAggLag INTEGER
  winA3StatusSessAggStatus INTEGER
  winA3StatusSessInstValue INTEGER
  winA3StatusSessInstMin INTEGER
  winA3StatusSessInstMax INTEGER
  winA3StatusSessInstMonitor INTEGER
  winA3StatusSessInstStatus INTEGER
  winA3StatusSessInstIds DisplayString
  winA3StatusSessSizeValue DisplayString
  winA3StatusSessSizeWarn DisplayString
  winA3StatusSessSizeCrit DisplayString
  winA3StatusSessSizeMonitor INTEGER
  winA3StatusSessSizeStatus INTEGER
  winA3StatusSessSizeIds DisplayString
  winA3StatusSessCpuInterval DisplayString
  winA3StatusSessCpuValue DisplayString
  winA3StatusSessCpuWarnValue DisplayString
  winA3StatusSessCpuCritValue DisplayString
  winA3StatusSessCpuWarn DisplayString
  winA3StatusSessCpuCrit DisplayString
  winA3StatusSessCpuMonitor INTEGER
  winA3StatusSessCpuStatus INTEGER
  winA3StatusSessCpuIds DisplayString
  winA3StatusSessCallBackRef DisplayString
  winA3StatusSessButton INTEGER

WinA3StatusPrnEntry  
SEQUENCE    
  winA3StatusPrnName DisplayString
  winA3StatusPrnDescription DisplayString
  winA3StatusPrnAutoWatcherName DisplayString
  winA3StatusPrnAggLagValue INTEGER
  winA3StatusPrnAggLag INTEGER
  winA3StatusPrnAggStatus INTEGER
  winA3StatusPrnEventValue INTEGER
  winA3StatusPrnEventMonitor INTEGER
  winA3StatusPrnEventStatus INTEGER
  winA3StatusPrnQueueValue INTEGER
  winA3StatusPrnQueueWarn INTEGER
  winA3StatusPrnQueueCrit INTEGER
  winA3StatusPrnQueueMonitor INTEGER
  winA3StatusPrnQueueStatus INTEGER
  winA3StatusPrnLossAction INTEGER
  winA3StatusPrnLossStatus INTEGER
  winA3StatusPrnCallBackRef DisplayString
  winA3StatusPrnButton INTEGER

WinA3StatusNetEntry  
SEQUENCE    
  winA3StatusNetName DisplayString
  winA3StatusNetAggLagValue INTEGER
  winA3StatusNetAggLag INTEGER
  winA3StatusNetAggStatus INTEGER
  winA3StatusNetInterfaceValue INTEGER
  winA3StatusNetInterfaceMonitor INTEGER
  winA3StatusNetInterfaceStatus INTEGER
  winA3StatusNetInBytesValue DisplayString
  winA3StatusNetInBytesWarnMin DisplayString
  winA3StatusNetInBytesWarnMax DisplayString
  winA3StatusNetInBytesCritMin DisplayString
  winA3StatusNetInBytesCritMax DisplayString
  winA3StatusNetInBytesMonitor INTEGER
  winA3StatusNetInBytesStatus INTEGER
  winA3StatusNetInPktsValue INTEGER
  winA3StatusNetInPktsWarn INTEGER
  winA3StatusNetInPktsCrit INTEGER
  winA3StatusNetInPktsMonitor INTEGER
  winA3StatusNetInPktsStatus INTEGER
  winA3StatusNetInErrorsValue INTEGER
  winA3StatusNetInErrorsWarn INTEGER
  winA3StatusNetInErrorsCrit INTEGER
  winA3StatusNetInErrorsMonitor INTEGER
  winA3StatusNetInErrorsStatus INTEGER
  winA3StatusNetOutBytesValue DisplayString
  winA3StatusNetOutBytesWarnMin DisplayString
  winA3StatusNetOutBytesWarnMax DisplayString
  winA3StatusNetOutBytesCritMin DisplayString
  winA3StatusNetOutBytesCritMax DisplayString
  winA3StatusNetOutBytesMonitor INTEGER
  winA3StatusNetOutBytesStatus INTEGER
  winA3StatusNetOutPktsValue INTEGER
  winA3StatusNetOutPktsWarn INTEGER
  winA3StatusNetOutPktsCrit INTEGER
  winA3StatusNetOutPktsMonitor INTEGER
  winA3StatusNetOutPktsStatus INTEGER
  winA3StatusNetOutErrorsValue INTEGER
  winA3StatusNetOutErrorsWarn INTEGER
  winA3StatusNetOutErrorsCrit INTEGER
  winA3StatusNetOutErrorsMonitor INTEGER
  winA3StatusNetOutErrorsStatus INTEGER
  winA3StatusNetLossAction INTEGER
  winA3StatusNetLossStatus INTEGER
  winA3StatusNetCallBackRef DisplayString

WinA3StatusRegEntry  
SEQUENCE    
  winA3StatusRegWatcherName DisplayString
  winA3StatusRegKeyName DisplayString
  winA3StatusRegValueName DisplayString
  winA3StatusRegDescription DisplayString
  winA3StatusRegAggLagValue INTEGER
  winA3StatusRegAggLag INTEGER
  winA3StatusRegAggStatus INTEGER
  winA3StatusRegValueData DisplayString
  winA3StatusRegValueType INTEGER
  winA3StatusRegValueRef DisplayString
  winA3StatusRegValuePolicy INTEGER
  winA3StatusRegValueMonitor INTEGER
  winA3StatusRegValueStatus INTEGER
  winA3StatusRegSubTreeMonitor INTEGER
  winA3StatusRegSubTreeStatus INTEGER
  winA3StatusRegExistPolicy INTEGER
  winA3StatusRegExistMonitor INTEGER
  winA3StatusRegExistStatus INTEGER
  winA3StatusRegCallBackRef DisplayString
  winA3StatusRegButton INTEGER

WinA3StatusHardwrEntry  
SEQUENCE    
  winA3StatusHardwrResName DisplayString
  winA3StatusHardwrResSubName DisplayString
  winA3StatusHardwrInstName DisplayString
  winA3StatusHardwrDescription DisplayString
  winA3StatusHardwrAutoWatcherName DisplayString
  winA3StatusHardwrAggStatus INTEGER
  winA3StatusHardwrCollectScript DisplayString
  winA3StatusHardwrCollectArgs DisplayString
  winA3StatusHardwrUserName DisplayString
  winA3StatusHardwrSkipCount INTEGER
  winA3StatusHardwrInfoMsg DisplayString
  winA3StatusHardwrErrorMsg DisplayString
  winA3StatusHardwrErrorMsgPattern DisplayString
  winA3StatusHardwrErrorMsgMonitor INTEGER
  winA3StatusHardwrErrorMsgStatus INTEGER
  winA3StatusHardwrResultValue DisplayString
  winA3StatusHardwrResultLagValue INTEGER
  winA3StatusHardwrResultLag INTEGER
  winA3StatusHardwrResultWarnMin DisplayString
  winA3StatusHardwrResultWarnMax DisplayString
  winA3StatusHardwrResultCritMin DisplayString
  winA3StatusHardwrResultCritMax DisplayString
  winA3StatusHardwrResultMonitor INTEGER
  winA3StatusHardwrResultStatus INTEGER
  winA3StatusHardwrLossAction INTEGER
  winA3StatusHardwrLossStatus INTEGER
  winA3StatusHardwrCallBackRef DisplayString
  winA3StatusHardwrButton INTEGER

WinA3StatusProgrmEntry  
SEQUENCE    
  winA3StatusProgrmResName DisplayString
  winA3StatusProgrmResSubName DisplayString
  winA3StatusProgrmInstName DisplayString
  winA3StatusProgrmDescription DisplayString
  winA3StatusProgrmAutoWatcherName DisplayString
  winA3StatusProgrmAggStatus INTEGER
  winA3StatusProgrmCollectScript DisplayString
  winA3StatusProgrmCollectArgs DisplayString
  winA3StatusProgrmUserName DisplayString
  winA3StatusProgrmSkipCount INTEGER
  winA3StatusProgrmInfoMsg DisplayString
  winA3StatusProgrmErrorMsg DisplayString
  winA3StatusProgrmErrorMsgPattern DisplayString
  winA3StatusProgrmErrorMsgMonitor INTEGER
  winA3StatusProgrmErrorMsgStatus INTEGER
  winA3StatusProgrmResultValue DisplayString
  winA3StatusProgrmResultLagValue INTEGER
  winA3StatusProgrmResultLag INTEGER
  winA3StatusProgrmResultWarnMin DisplayString
  winA3StatusProgrmResultWarnMax DisplayString
  winA3StatusProgrmResultCritMin DisplayString
  winA3StatusProgrmResultCritMax DisplayString
  winA3StatusProgrmResultMonitor INTEGER
  winA3StatusProgrmResultStatus INTEGER
  winA3StatusProgrmLossAction INTEGER
  winA3StatusProgrmLossStatus INTEGER
  winA3StatusProgrmCallBackRef DisplayString
  winA3StatusProgrmButton INTEGER

WinEHCpuEntry  
SEQUENCE    
  winEHCpuIndex INTEGER
  winEHCpuName DisplayString
  winEHCpuIdlePercent INTEGER
  winEHCpuUserPercent INTEGER
  winEHCpuSysPercent INTEGER

WinEHDiskEntry  
SEQUENCE    
  winEHDiskIndex INTEGER
  winEHDiskName DisplayString
  winEHDiskDeviceErrors Counter
  winEHDiskStorageCapacity INTEGER
  winEHDiskQueueLength Gauge
  winEHDiskUtilization INTEGER
  winEHDiskKBytesTransferred Counter
  winEHDiskReads Counter
  winEHDiskWrites Counter

WinEHDevEntry  
SEQUENCE    
  winEHDevIndex INTEGER
  winEHDevName DisplayString
  winEHDevStorageAllocationUnits INTEGER
  winEHDevStorageSize INTEGER
  winEHDevStorageUsed INTEGER
  winEHDevStorageAllocationFailures Counter

WinEHIfEntry  
SEQUENCE    
  winEHIfIndex INTEGER
  winEHIfDescr DisplayString
  winEHIfType INTEGER
  winEHIfSpeed Gauge
  winEHIfPhysAddress PhysAddress
  winEHIfAdminStatus INTEGER
  winEHIfOperStatus INTEGER
  winEHIfLastChange TimeTicks
  winEHIfInOctets Counter
  winEHIfInUcastPkts Counter
  winEHIfInNUcastPkts Counter
  winEHIfInDiscards Counter
  winEHIfInErrors Counter
  winEHIfInUnknownProtos Counter
  winEHIfOutOctets Counter
  winEHIfOutUcastPkts Counter
  winEHIfOutNUcastPkts Counter
  winEHIfOutDiscards Counter
  winEHIfOutErrors Counter
  winEHIfIpAdEntAddr IpAddress

WinEHProcEntry  
SEQUENCE    
  winEHProcName DisplayString
  winEHProcNumber INTEGER
  winEHProcPid DisplayString
  winEHProcState INTEGER
  winEHProcSize Gauge
  winEHProcRSS Gauge
  winEHProcTime INTEGER
  winEHProcNumThreads INTEGER
  winEHProcMajorPgFlts Counter

Defined Values

cai 1.3.6.1.4.1.791
OBJECT IDENTIFIER    

caiSysMgr 1.3.6.1.4.1.791.2
OBJECT IDENTIFIER    

tng 1.3.6.1.4.1.791.2.10
OBJECT IDENTIFIER    

agents 1.3.6.1.4.1.791.2.10.2
OBJECT IDENTIFIER    

caiWinA3 1.3.6.1.4.1.791.2.10.2.90
OBJECT IDENTIFIER    

winA3ConfigGroup 1.3.6.1.4.1.791.2.10.2.90.1
OBJECT IDENTIFIER    

winA3ConfigGeneralGroup 1.3.6.1.4.1.791.2.10.2.90.1.1
OBJECT IDENTIFIER    

winA3ConfigSysGroup 1.3.6.1.4.1.791.2.10.2.90.1.2
OBJECT IDENTIFIER    

winA3ConfigCPUGroup 1.3.6.1.4.1.791.2.10.2.90.1.3
OBJECT IDENTIFIER    

winA3ConfigMemGroup 1.3.6.1.4.1.791.2.10.2.90.1.4
OBJECT IDENTIFIER    

winA3ConfigLVolGroup 1.3.6.1.4.1.791.2.10.2.90.1.5
OBJECT IDENTIFIER    

winA3ConfigMntGroup 1.3.6.1.4.1.791.2.10.2.90.1.6
OBJECT IDENTIFIER    

winA3ConfigDfsGroup 1.3.6.1.4.1.791.2.10.2.90.1.7
OBJECT IDENTIFIER    

winA3ConfigQuotaGroup 1.3.6.1.4.1.791.2.10.2.90.1.8
OBJECT IDENTIFIER    

winA3ConfigDirGroup 1.3.6.1.4.1.791.2.10.2.90.1.9
OBJECT IDENTIFIER    

winA3ConfigFileGroup 1.3.6.1.4.1.791.2.10.2.90.1.10
OBJECT IDENTIFIER    

winA3ConfigProcGroup 1.3.6.1.4.1.791.2.10.2.90.1.11
OBJECT IDENTIFIER    

winA3ConfigSrvcGroup 1.3.6.1.4.1.791.2.10.2.90.1.12
OBJECT IDENTIFIER    

winA3ConfigJobGroup 1.3.6.1.4.1.791.2.10.2.90.1.13
OBJECT IDENTIFIER    

winA3ConfigSessGroup 1.3.6.1.4.1.791.2.10.2.90.1.14
OBJECT IDENTIFIER    

winA3ConfigPrnGroup 1.3.6.1.4.1.791.2.10.2.90.1.15
OBJECT IDENTIFIER    

winA3ConfigNetGroup 1.3.6.1.4.1.791.2.10.2.90.1.16
OBJECT IDENTIFIER    

winA3ConfigRegGroup 1.3.6.1.4.1.791.2.10.2.90.1.17
OBJECT IDENTIFIER    

winA3ConfigHardwrGroup 1.3.6.1.4.1.791.2.10.2.90.1.18
OBJECT IDENTIFIER    

winA3ConfigProgrmGroup 1.3.6.1.4.1.791.2.10.2.90.1.19
OBJECT IDENTIFIER    

winA3StatusGroup 1.3.6.1.4.1.791.2.10.2.90.2
OBJECT IDENTIFIER    

winA3StatusGeneralGroup 1.3.6.1.4.1.791.2.10.2.90.2.1
OBJECT IDENTIFIER    

winA3StatusCPUGroup 1.3.6.1.4.1.791.2.10.2.90.2.3
OBJECT IDENTIFIER    

winA3StatusMemGroup 1.3.6.1.4.1.791.2.10.2.90.2.4
OBJECT IDENTIFIER    

winA3StatusLVolGroup 1.3.6.1.4.1.791.2.10.2.90.2.5
OBJECT IDENTIFIER    

winA3StatusMntGroup 1.3.6.1.4.1.791.2.10.2.90.2.6
OBJECT IDENTIFIER    

winA3StatusDfsGroup 1.3.6.1.4.1.791.2.10.2.90.2.7
OBJECT IDENTIFIER    

winA3StatusQuotaGroup 1.3.6.1.4.1.791.2.10.2.90.2.8
OBJECT IDENTIFIER    

winA3StatusDirGroup 1.3.6.1.4.1.791.2.10.2.90.2.9
OBJECT IDENTIFIER    

winA3StatusFileGroup 1.3.6.1.4.1.791.2.10.2.90.2.10
OBJECT IDENTIFIER    

winA3StatusProcGroup 1.3.6.1.4.1.791.2.10.2.90.2.11
OBJECT IDENTIFIER    

winA3StatusSrvcGroup 1.3.6.1.4.1.791.2.10.2.90.2.12
OBJECT IDENTIFIER    

winA3StatusJobGroup 1.3.6.1.4.1.791.2.10.2.90.2.13
OBJECT IDENTIFIER    

winA3StatusSessGroup 1.3.6.1.4.1.791.2.10.2.90.2.14
OBJECT IDENTIFIER    

winA3StatusPrnGroup 1.3.6.1.4.1.791.2.10.2.90.2.15
OBJECT IDENTIFIER    

winA3StatusNetGroup 1.3.6.1.4.1.791.2.10.2.90.2.16
OBJECT IDENTIFIER    

winA3StatusRegGroup 1.3.6.1.4.1.791.2.10.2.90.2.17
OBJECT IDENTIFIER    

winA3StatusHardwrGroup 1.3.6.1.4.1.791.2.10.2.90.2.18
OBJECT IDENTIFIER    

winA3StatusProgrmGroup 1.3.6.1.4.1.791.2.10.2.90.2.19
OBJECT IDENTIFIER    

winA3AvailableGroup 1.3.6.1.4.1.791.2.10.2.90.3
OBJECT IDENTIFIER    

winA3AvailLVolGroup 1.3.6.1.4.1.791.2.10.2.90.3.5
OBJECT IDENTIFIER    

winA3AvailMntGroup 1.3.6.1.4.1.791.2.10.2.90.3.6
OBJECT IDENTIFIER    

winA3AvailDfsGroup 1.3.6.1.4.1.791.2.10.2.90.3.7
OBJECT IDENTIFIER    

winA3AvailQuotaGroup 1.3.6.1.4.1.791.2.10.2.90.3.8
OBJECT IDENTIFIER    

winA3AvailProcGroup 1.3.6.1.4.1.791.2.10.2.90.3.11
OBJECT IDENTIFIER    

winA3AvailSrvcGroup 1.3.6.1.4.1.791.2.10.2.90.3.12
OBJECT IDENTIFIER    

winA3AvailJobGroup 1.3.6.1.4.1.791.2.10.2.90.3.13
OBJECT IDENTIFIER    

winA3AvailSessGroup 1.3.6.1.4.1.791.2.10.2.90.3.14
OBJECT IDENTIFIER    

winA3AvailPrnGroup 1.3.6.1.4.1.791.2.10.2.90.3.15
OBJECT IDENTIFIER    

winA3AvailHardwrGroup 1.3.6.1.4.1.791.2.10.2.90.3.18
OBJECT IDENTIFIER    

winA3AvailProgrmGroup 1.3.6.1.4.1.791.2.10.2.90.3.19
OBJECT IDENTIFIER    

winA3HistoryGroup 1.3.6.1.4.1.791.2.10.2.90.4
OBJECT IDENTIFIER    

winA3ConfigGeneralAgentVersion 1.3.6.1.4.1.791.2.10.2.90.1.1.1
&Currently installed version of the agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigGeneralColdStartTime 1.3.6.1.4.1.791.2.10.2.90.1.1.2
&Date and time that the agent was last started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigGeneralWarmStartTime 1.3.6.1.4.1.791.2.10.2.90.1.1.3
&Date and time that the agent's configuration was last changed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigGeneralCPUPollTime 1.3.6.1.4.1.791.2.10.2.90.1.1.4
&Date and time that the agent last collected CPU information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigGeneralMemPollTime 1.3.6.1.4.1.791.2.10.2.90.1.1.5
&Date and time that the agent last collected memory information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigGeneralLVolPollTime 1.3.6.1.4.1.791.2.10.2.90.1.1.6
&Date and time that the agent last collected logical volume information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigGeneralMntPollTime 1.3.6.1.4.1.791.2.10.2.90.1.1.7
&Date and time that the agent last collected mount information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigGeneralDfsPollTime 1.3.6.1.4.1.791.2.10.2.90.1.1.8
&Date and time that the agent last collected distributed file system link information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigGeneralQuotaPollTime 1.3.6.1.4.1.791.2.10.2.90.1.1.9
&Date and time that the agent last collected quota information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigGeneralDirPollTime 1.3.6.1.4.1.791.2.10.2.90.1.1.10
&Date and time that the agent last collected directory information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigGeneralFilePollTime 1.3.6.1.4.1.791.2.10.2.90.1.1.11
&Date and time that the agent last collected file information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigGeneralProcPollTime 1.3.6.1.4.1.791.2.10.2.90.1.1.12
&Date and time that the agent last collected process information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigGeneralSrvcPollTime 1.3.6.1.4.1.791.2.10.2.90.1.1.13
&Date and time that the agent last collected service information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigGeneralJobPollTime 1.3.6.1.4.1.791.2.10.2.90.1.1.14
&Date and time that the agent last collected job information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigGeneralSessPollTime 1.3.6.1.4.1.791.2.10.2.90.1.1.15
&Date and time that the agent last collected terminal session information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigGeneralPrnPollTime 1.3.6.1.4.1.791.2.10.2.90.1.1.16
&Date and time that the agent last collected printer information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigGeneralNetPollTime 1.3.6.1.4.1.791.2.10.2.90.1.1.17
&Date and time that the agent last collected network interface information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigGeneralRegPollTime 1.3.6.1.4.1.791.2.10.2.90.1.1.18
&Date and time that the agent last collected registry entry information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigGeneralHardwrPollTime 1.3.6.1.4.1.791.2.10.2.90.1.1.19
&Date and time that the agent last collected hardware resource information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigGeneralProgrmPollTime 1.3.6.1.4.1.791.2.10.2.90.1.1.20
&Date and time that the agent last collected programmable resource information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigSysNodeName 1.3.6.1.4.1.791.2.10.2.90.1.2.1
&The computer name of the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigSysClusterName 1.3.6.1.4.1.791.2.10.2.90.1.2.2
&The name and type of the cluster of which this system is a member of. For an unclustered system this attribute is set to '-'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigSysOsVersion 1.3.6.1.4.1.791.2.10.2.90.1.2.3
&Details about the installed OS version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigSysBiosVersion 1.3.6.1.4.1.791.2.10.2.90.1.2.4
&Details about the BIOS version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigSysHyperThread 1.3.6.1.4.1.791.2.10.2.90.1.2.5
&This attribute can be one of the following values: unknown(1) - The agent cannot access all processors and hence cannot determine the HT support. not-supported(2) - The processors architecture is Pentium 4 without HT, Pentium 3 or below. supported-disabled(3) - The processors architecture is Pentium 4 with HT, but only one logical CPU is configured per physical CPU. supported-inactive(4) - The processors architecture is Pentium 4 with HT and two or more logical CPUs are configured per physical CPU, but only one logical CPU is used per physical CPU by the system. supported-active(5) - The processors architecture is Pentium 4 with HT and two or more logical CPUs are configured per physical CPU, and all logical CPUs are used by the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), not-supported(2), supported-disabled(3), supported-inactive(4), supported-active(5)  

winA3ConfigSysPhysicalCpu 1.3.6.1.4.1.791.2.10.2.90.1.2.6
&The number of the physical processors on the system. This value equals the number of CPUs displayed in the CPU status table. Exception: If the value of SysHyperThread is supported-active(5), the number of CPUs displayed in the CPU status table equals the number of logical processors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigSysLogicalCpu 1.3.6.1.4.1.791.2.10.2.90.1.2.7
&The number of the logical processors on the system. This value will only be greater than the number of the physical processors if the value of SysHyperThread is supported-inactive(4) or supported-active(5). In the later case, this value equals the number of CPUs displayed in the CPU status table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigSysLicensedCpu 1.3.6.1.4.1.791.2.10.2.90.1.2.8
&The number of processors licensed by the installed OS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigSysColdStartTime 1.3.6.1.4.1.791.2.10.2.90.1.2.9
&The point in time the system was booted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigSysAutoReboot 1.3.6.1.4.1.791.2.10.2.90.1.2.10
&If the value is 1 (true), the system is configured to automatically reboot after a system crash.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigCPUPollInterval 1.3.6.1.4.1.791.2.10.2.90.1.3.1
&Time, in seconds, between collections of CPU information. Valid range: 30 seconds or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigCPUPollMethod 1.3.6.1.4.1.791.2.10.2.90.1.3.2
&Specifies how and when the agent collects CPU information. If set to 1 (disabled), the agent does not retrieve the CPU information (neither by polling nor by get request) and sets all statuses to passive or ok. If set to 2 (poll-interval-only), the agent only retrieves the information by polling, but not by get request. If set to 3 (poll-interval-and-query), the agent retrieves the information both by polling and by get request. If set to 4 (query-only), the agent retrieves the information only when a get request is made.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

winA3ConfigCPUAggLag 1.3.6.1.4.1.791.2.10.2.90.1.3.3
&Default aggregate lag setting for the CPU watcher to add. Specifies the consecutive number of times at which any status is not in the ok state, before the aggregate status changes. This value must be greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigCPULoadWarnMin 1.3.6.1.4.1.791.2.10.2.90.1.3.4
&Default warning minimum threshold, in percent, for the CPU utilization monitoring of the CPU watcher to add. This value represents a declining threshold and must be equal to or greater than 0.0, less than or equal to 100.0, equal to or greater than the critical minimum threshold, but cannot be greater than the warning maximum threshold. A value of -1 disables the evaluation of this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigCPULoadWarnMax 1.3.6.1.4.1.791.2.10.2.90.1.3.5
&Default warning maximum threshold, in percent, for the CPU utilization monitoring of the CPU watcher to add. This value represents a rising threshold and must be equal to or greater than 0.0, less than or equal to 100.0, equal to or greater than the warning minimum threshold, but cannot be greater than the critical maximum threshold. A value of -1 disables the evaluation of this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigCPULoadCritMin 1.3.6.1.4.1.791.2.10.2.90.1.3.6
&Default critical minimum threshold, in percent, for the CPU utilization monitoring of the CPU watcher to add. This value represents a declining threshold and must be equal to or greater than 0.0, less than or equal to 100.0, but cannot be greater than the warning minimum threshold. A value of -1 disables the evaluation of this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigCPULoadCritMax 1.3.6.1.4.1.791.2.10.2.90.1.3.7
&Default critical maximum threshold, in percent, for the CPU utilization monitoring of the CPU watcher to add. This value represents a rising threshold and must be equal to or greater than 0.0, less than or equal to 100.0, but cannot be less than the warning maximum threshold. A value of -1 disables the evaluation of this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigCPULoadMonitor 1.3.6.1.4.1.791.2.10.2.90.1.3.8
&Default monitor level for the CPU utilization monitoring of the CPU watcher to add. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning thresholds (both minimum and maximum) to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical thresholds (both minimum and maximum) to determine the status of the resource. If set to 4 (minimum-only), the agent evaluates only the minimum thresholds (both warning and critical) to determine the status of the resource. If set to 5 (maximum-only), the agent evaluates only the maximum thresholds (both warning and critical) to determine the status of the resource. If set to 6 (all), the agent evaluates all thresholds to determine the status of the resource.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), minimum-only(4), maximum-only(5), all(6)  

winA3ConfigCPUQueueWarn 1.3.6.1.4.1.791.2.10.2.90.1.3.9
&Default warning threshold for the CPU queue length monitoring of the CPU watcher to add. This value represents a rising threshold and must be greater than 0.0, but cannot be greater than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigCPUQueueCrit 1.3.6.1.4.1.791.2.10.2.90.1.3.10
&Default critical threshold for the CPU queue length monitoring of the CPU watcher to add. This value represents a rising threshold and must be greater than 0.0, but cannot be less than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigCPUQueueMonitor 1.3.6.1.4.1.791.2.10.2.90.1.3.11
&Default monitor level for the CPU queue length monitoring of the CPU watcher to add. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning threshold to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical threshold to determine the status of the resource. If set to 4 (both), the agent evaluates both the warning and critical thresholds to determine the status of the resource. The critical threshold comes into effect if the warning threshold is set to the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

winA3ConfigCPULossAction 1.3.6.1.4.1.791.2.10.2.90.1.3.12
&Default loss action for the CPU watcher to add. Specifies the action to take if the monitored CPU is removed from the Windows System configuration. If set to 1 (remove), the agent automatically removes the watcher. If set to 2 (up), the agent sets all statuses to ok. If set to 3 (down-warning), the agent sets the loss and aggregate statuses to warning and all other statuses to ok. If set to 4 (down-critical), the agent sets the loss and aggregate statuses to critical and all other statuses to ok.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

winA3ConfigMemPollInterval 1.3.6.1.4.1.791.2.10.2.90.1.4.1
&Time, in seconds, between collections of memory information. Valid range: 30 seconds or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigMemPollMethod 1.3.6.1.4.1.791.2.10.2.90.1.4.2
&Specifies how and when the agent collects memory information. If set to 1 (disabled), the agent does not retrieve the memory information (neither by polling nor by get request) and sets all statuses to passive or ok. If set to 2 (poll-interval-only), the agent only retrieves the information by polling, but not by get request. If set to 3 (poll-interval-and-query), the agent retrieves the information both by polling and by get request. If set to 4 (query-only), the agent retrieves the information only when a get request is made.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

winA3ConfigLVolPollInterval 1.3.6.1.4.1.791.2.10.2.90.1.5.1
&Time, in seconds, between collections of logical volume information. Valid range: 30 seconds or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigLVolPollMethod 1.3.6.1.4.1.791.2.10.2.90.1.5.2
&Specifies how and when the agent collects logical volume information. If set to 1 (disabled), the agent does not retrieve the logical volume information (neither by polling nor by get request) and sets all statuses to passive or ok. If set to 2 (poll-interval-only), the agent only retrieves the information by polling, but not by get request. If set to 3 (poll-interval-and-query), the agent retrieves the information both by polling and by get request. If set to 4 (query-only), the agent retrieves the information only when a get request is made.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

winA3ConfigLVolAutoPollInterval 1.3.6.1.4.1.791.2.10.2.90.1.5.3
&Time, in minutes, between the processing of the logical volume auto watchers. Valid range: -1 (suspended), 30 minutes or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigLVolName 1.3.6.1.4.1.791.2.10.2.90.1.5.4
&Name of the logical volume for which to add or remove a watcher. A fully qualified logical volume name can be in drive letter format (e.g. C:) or in GUID format (e.g. Volume{2ab0a340-997c-11d6-9d96-00b0d09b7d72}). If used as a filter element for auto discovery, this name can be a regular expression (case-insensitive). In this case, it restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigLVolMounts 1.3.6.1.4.1.791.2.10.2.90.1.5.5
&A list of the mount points (seperated by pipe signs), where this logical volume is mounted on. This attribute is only used as a filter element for auto discovery and can be a regular expression (case-insensitive). It restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigLVolInfo 1.3.6.1.4.1.791.2.10.2.90.1.5.6
&Information about the label, the filesystem (e.g. NTFS) and the alternate name (e.g. used in performance monitor) of the logical volume. This string has the format 'Label (FSys) (Alternate)'. 'Label' resp. 'FSys' are set to '-', if no label is defined, if the logical volume is not formatted or if it currently is in a clustered-passive state. 'Alternate' may be missing if not applicable (typically if the logical volume can be adressed by a drive letter). This attribute is only used as a filter element for auto discovery and can be a regular expression (case-insensitive). It restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigLVolClusterType 1.3.6.1.4.1.791.2.10.2.90.1.5.7
&Cluster type of the logical volume to be searched for during an auto discovery run. This attribute is only used when adding an auto watcher. If set to 1 (not-clustered), the search is restricted to not-clustered resources only. If set to 2 (clustered-active), the search is restricted to clustered-active resources only. If set to 3 (clustered-passive), the search is restricted to clustered-passive resources only. If set to 4 (any), the cluster type does not affect the search.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-clustered(1), clustered-active(2), clustered-passive(3), any(4)  

winA3ConfigLVolDescription 1.3.6.1.4.1.791.2.10.2.90.1.5.8
&Default description for the logical volume watcher to add.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigLVolAggLag 1.3.6.1.4.1.791.2.10.2.90.1.5.9
&Default aggregate lag setting for the logical volume watcher to add. Specifies the consecutive number of times at which any status is not in the ok state, before the aggregate status changes. This value must be greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigLVolSizeWarn 1.3.6.1.4.1.791.2.10.2.90.1.5.10
&Default warning threshold, in megabytes, for the logical volume utilization monitoring of the logical volume watcher to add. The active warning threshold is derived from this value and represents a rising threshold. The derived value must be greater than 0.0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in winA3StatusLVolSizeTotal, but cannot be greater than the active critical threshold. These constraints will be maintained by the agent during all configuration actions. The threshold can be specified as either an absolute value (n) or a percentage (n%). It can also be specified as the absolute value left free (nF). The value of winA3StatusLVolSizeTotal will be the reference value for n% and nF notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigLVolSizeCrit 1.3.6.1.4.1.791.2.10.2.90.1.5.11
&Default critical threshold, in megabytes, for the logical volume utilization monitoring of the logical volume watcher to add. The active critical threshold is derived from this value and represents a rising threshold. The derived value must be greater than 0.0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in winA3StatusLVolSizeTotal, but cannot be less than the active warning threshold. These constraints will be maintained by the agent during all configuration actions. The threshold can be specified as either an absolute value (n) or a percentage (n%). It can also be specified as the absolute value left free (nF). The value of winA3StatusLVolSizeTotal will be the reference value for n% and nF notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigLVolSizeMonitor 1.3.6.1.4.1.791.2.10.2.90.1.5.12
&Default monitor level for the logical volume utilization monitoring of the logical volume watcher to add. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning threshold to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical threshold to determine the status of the resource. If set to 4 (both), the agent evaluates both the warning and critical thresholds to determine the status of the resource. The critical threshold comes into effect if the warning threshold is set to the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

winA3ConfigLVolSizeDWarn 1.3.6.1.4.1.791.2.10.2.90.1.5.13
&Default warning threshold, in megabytes, for the delta logical volume utilization monitoring of the logical volume watcher to add. The active warning threshold is derived from this value and represents a rising threshold. The derived value must be greater than 0.0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in winA3StatusLVolSizeTotal, but cannot be greater than the active critical threshold. These constraints will be maintained by the agent during all configuration actions. The threshold can be specified as either an absolute value or a percentage and can denote a growth, shrinkage or change in either direction: Absolute shrinkage (n-), absolute growth (n+), absolute change in either direction (n), percentage shrinkage (n%-), percentage growth (n%+), or percentage change in either direction (n%). The value of winA3StatusLVolSizeTotal will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigLVolSizeDCrit 1.3.6.1.4.1.791.2.10.2.90.1.5.14
&Default critical threshold, in megabytes, for the delta logical volume utilization monitoring of the logical volume watcher to add. The active critical threshold is derived from this value and represents a rising threshold. The derived value must be greater than 0.0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in winA3StatusLVolSizeTotal, but cannot be less than the active warning threshold. These constraints will be maintained by the agent during all configuration actions. The threshold can be specified as either an absolute value or a percentage and can denote a growth, shrinkage or change in either direction: Absolute shrinkage (n-), absolute growth (n+), absolute change in either direction (n), percentage shrinkage (n%-), percentage growth (n%+), or percentage change in either direction (n%). The value of winA3StatusLVolSizeTotal will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigLVolSizeDMonitor 1.3.6.1.4.1.791.2.10.2.90.1.5.15
&Default monitor level for the delta logical volume utilization monitoring of the logical volume watcher to add. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning threshold to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical threshold to determine the status of the resource. If set to 4 (both), the agent evaluates both the warning and critical thresholds to determine the status of the resource. The critical threshold comes into effect if the warning threshold is set to the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

winA3ConfigLVolMiscMode 1.3.6.1.4.1.791.2.10.2.90.1.5.16
&This attribute determines which value (throughput or queue-length) should be calculated by this metric. The option throughput(1) is expressed in KBytes/sec. The option queue-length(2) is expressed as an average number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER throughput(1), queue-length(2)  

winA3ConfigLVolMiscWarn 1.3.6.1.4.1.791.2.10.2.90.1.5.17
&Default warning threshold for the miscellaneous data monitoring of the logical volume watcher to add. This value represents a rising threshold and must be greater than 0.0, but cannot be greater than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigLVolMiscCrit 1.3.6.1.4.1.791.2.10.2.90.1.5.18
&Default critical threshold for the miscellaneous data monitoring of the logical volume watcher to add. This value represents a rising threshold and must be greater than 0.0, but cannot be less than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigLVolMiscMonitor 1.3.6.1.4.1.791.2.10.2.90.1.5.19
&Default monitor level for the miscellaneous data monitoring of the logical volume watcher to add. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning threshold to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical threshold to determine the status of the resource. If set to 4 (both), the agent evaluates both the warning and critical thresholds to determine the status of the resource. The critical threshold comes into effect if the warning threshold is set to the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

winA3ConfigLVolFragmtMode 1.3.6.1.4.1.791.2.10.2.90.1.5.20
&This attribute determines which mode of fragmentation (file or total) should be calculated. The option total-fragmentation(2) is only supported on Windows 2003/XP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER file-fragmentation(1), total-fragmentation(2)  

winA3ConfigLVolFragmtInterval 1.3.6.1.4.1.791.2.10.2.90.1.5.21
&Time, in hours, between collections of fragmentation information (always triggered by the next polling or a get request). The agent will not calculate the fragmentation every standard poll interval, because it is an expensive task. Valid range: 1 hour or greater, or -1 to disable the fragmentation calculation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigLVolFragmtWarn 1.3.6.1.4.1.791.2.10.2.90.1.5.22
&Default warning threshold, in percent, for the fragmentation monitoring of the logical volume watcher to add. This value represents a rising threshold and must be greater than 0, less than or equal to 100, but cannot be greater than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigLVolFragmtCrit 1.3.6.1.4.1.791.2.10.2.90.1.5.23
&Default critical threshold, in percent, for the fragmentation monitoring of the logical volume watcher to add. This value represents a rising threshold and must be greater than 0, less than or equal to 100, but cannot be less than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigLVolFragmtMonitor 1.3.6.1.4.1.791.2.10.2.90.1.5.24
&Default monitor level for the fragmentation monitoring of the logical volume watcher to add. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning threshold to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical threshold to determine the status of the resource. If set to 4 (both), the agent evaluates both the warning and critical thresholds to determine the status of the resource. The critical threshold comes into effect if the warning threshold is set to the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

winA3ConfigLVolLossAction 1.3.6.1.4.1.791.2.10.2.90.1.5.25
&Default loss action for the logical volume watcher to add. Specifies the action to take if the monitored logical volume is removed from the Windows System configuration. If set to 1 (remove), the agent automatically removes the watcher. If set to 2 (up), the agent sets all statuses to ok. If set to 3 (down-warning), the agent sets the loss and aggregate statuses to warning and all other statuses to ok. If set to 4 (down-critical), the agent sets the loss and aggregate statuses to critical and all other statuses to ok.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

winA3ConfigLVolAutoTableWatcherName 1.3.6.1.4.1.791.2.10.2.90.1.5.26
&Name of the logical volume auto watcher to add or remove.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigLVolAutoTableWatcherMatchType 1.3.6.1.4.1.791.2.10.2.90.1.5.27
&Default search algorithm for the logical volume auto watcher to add. The filter is the logical AND of all attributes used to identify or otherwise narrow down resources. If set to 1 (positive), the agent searches for logical volume resources that match the filter. If set to 2 (negative), the agent searches for logical volume resources that do not match the filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER positive(1), negative(2)  

winA3ConfigLVolAutoTableWatcherLimit 1.3.6.1.4.1.791.2.10.2.90.1.5.28
&Default minimum number of matches that causes a lock of the logical volume auto watcher to add.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigLVolButton 1.3.6.1.4.1.791.2.10.2.90.1.5.29
&This attribute is used to add or remove the logical volume watcher specified by the current setting of the watcher name attribute(s) in this group. If set to 2 (add), the agent adds the specified watcher to the status table using the current values of the remaining attributes as defaults. If set to 3 (remove), the agent removes the specified watcher from the status table. If set to 4 (add-auto), the agent adds the specified watcher to the auto configuration table using the current values of the remaining attributes as defaults. If set to 5 (remove-auto), the agent removes the specified watcher from the auto configuration table. This attribute cannot be set to 1 (none).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3), add-auto(4), remove-auto(5)  

winA3ConfigLVolAutoCount 1.3.6.1.4.1.791.2.10.2.90.1.5.30
&Number of auto watchers in the logical volume auto configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

winA3ConfigLVolAutoLocked 1.3.6.1.4.1.791.2.10.2.90.1.5.31
&Number of auto watchers in the logical volume auto configuration table which are currently locked.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

winA3ConfigLVolAutoTable 1.3.6.1.4.1.791.2.10.2.90.1.5.32
&Configuration table containing a list of logical volume auto watchers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WinA3ConfigLVolAutoEntry

winA3ConfigLVolAutoEntry 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1
&Entry in the logical volume auto watcher configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WinA3ConfigLVolAutoEntry  

winA3ConfigLVolAutoWatcherName 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1.1
&Name of the logical volume auto watcher.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigLVolAutoName 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1.2
&Name of the logical volume to be searched for during an auto discovery run. A fully qualified logical volume name can be in drive letter format (e.g. C:) or in GUID format (e.g. Volume{2ab0a340-997c-11d6-9d96-00b0d09b7d72}). This name is used as a filter element for auto discovery and can be a regular expression (case-insensitive). It restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigLVolAutoMounts 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1.3
&A list of the mount points (seperated by pipe signs), where this logical volume is mounted on. This attribute is used as a filter element for auto discovery and can be a regular expression (case-insensitive). It restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigLVolAutoInfo 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1.4
&Information about the label, the filesystem (e.g. NTFS) and the alternate name (e.g. used in performance monitor) of the logical volume. This string has the format 'Label (FSys) (Alternate)'. 'Label' resp. 'FSys' are set to '-', if no label is defined, if the logical volume is not formatted or if it currently is in a clustered-passive state. 'Alternate' may be missing if not applicable (typically if the logical volume can be adressed by a drive letter). This attribute is used as a filter element for auto discovery and can be a regular expression (case-insensitive). It restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigLVolAutoClusterType 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1.5
&Cluster type of the logical volume to be searched for during an auto discovery run. If set to 1 (not-clustered), the search is restricted to not-clustered resources only. If set to 2 (clustered-active), the search is restricted to clustered-active resources only. If set to 3 (clustered-passive), the search is restricted to clustered-passive resources only. If set to 4 (any), the cluster type does not affect the search.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-clustered(1), clustered-active(2), clustered-passive(3), any(4)  

winA3ConfigLVolAutoDescription 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1.6
&Current description for the logical volume auto watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigLVolAutoWatcherMatchType 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1.7
&Current search algorithm for the logical volume auto watcher. The filter is the logical AND of all attributes used to identify or otherwise narrow down resources. If set to 1 (positive), the agent searches for logical volume resources that match the filter. If set to 2 (negative), the agent searches for logical volume resources that do not match the filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER positive(1), negative(2)  

winA3ConfigLVolAutoWatcherLimit 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1.8
&Current minimum number of matches that causes the logical volume auto watcher to be locked.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigLVolAutoWatcherLastMatched 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1.9
&Number of matches for the last logical volume auto discovery run.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

winA3ConfigLVolAutoAggLag 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1.10
&Current lag setting for the logical volume auto watcher. Specifies the consecutive number of times at which any status is not in the ok state, before the aggregate status changes. This value must be greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigLVolAutoSizeWarn 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1.11
&Default warning threshold, in megabytes, for the logical volume utilization monitoring of any logical volume watcher created by the auto watcher. The active warning threshold is derived from this value and represents a rising threshold. The derived value must be greater than 0.0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in winA3StatusLVolSizeTotal, but cannot be greater than the active critical threshold. These constraints will be maintained by the agent during all configuration actions. The threshold can be specified as either an absolute value (n) or a percentage (n%). It can also be specified as the absolute value left free (nF). The value of winA3StatusLVolSizeTotal will be the reference value for n% and nF notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigLVolAutoSizeCrit 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1.12
&Default critical threshold, in megabytes, for the logical volume utilization monitoring of any logical volume watcher created by the auto watcher. The active critical threshold is derived from this value and represents a rising threshold. The derived value must be greater than 0.0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in winA3StatusLVolSizeTotal, but cannot be less than the active warning threshold. These constraints will be maintained by the agent during all configuration actions. The threshold can be specified as either an absolute value (n) or a percentage (n%). It can also be specified as the absolute value left free (nF). The value of winA3StatusLVolSizeTotal will be the reference value for n% and nF notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigLVolAutoSizeMonitor 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1.13
&Default monitor level for the logical volume utilization monitoring of any logical volume watcher created by the auto watcher. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning threshold to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical threshold to determine the status of the resource. If set to 4 (both), the agent evaluates both the warning and critical thresholds to determine the status of the resource. The critical threshold comes into effect if the warning threshold is set to the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

winA3ConfigLVolAutoSizeDWarn 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1.14
&Default warning threshold, in megabytes, for the delta logical volume utilization monitoring of any logical volume watcher created by the auto watcher. The active warning threshold is derived from this value and represents a rising threshold. The derived value must be greater than 0.0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in winA3StatusLVolSizeTotal, but cannot be greater than the active critical threshold. These constraints will be maintained by the agent during all configuration actions. The threshold can be specified as either an absolute value or a percentage and can denote a growth, shrinkage or change in either direction: Absolute shrinkage (n-), absolute growth (n+), absolute change in either direction (n), percentage shrinkage (n%-), percentage growth (n%+), or percentage change in either direction (n%). The value of winA3StatusLVolSizeTotal will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigLVolAutoSizeDCrit 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1.15
&Default critical threshold, in megabytes, for the delta logical volume utilization monitoring of any logical volume watcher created by the auto watcher. The active critical threshold is derived from this value and represents a rising threshold. The derived value must be greater than 0.0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in winA3StatusLVolSizeTotal, but cannot be less than the active warning threshold. These constraints will be maintained by the agent during all configuration actions. The threshold can be specified as either an absolute value or a percentage and can denote a growth, shrinkage or change in either direction: Absolute shrinkage (n-), absolute growth (n+), absolute change in either direction (n), percentage shrinkage (n%-), percentage growth (n%+), or percentage change in either direction (n%). The value of winA3StatusLVolSizeTotal will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigLVolAutoSizeDMonitor 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1.16
&Default monitor level for the delta logical volume utilization monitoring of any logical volume watcher created by the auto watcher. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning threshold to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical threshold to determine the status of the resource. If set to 4 (both), the agent evaluates both the warning and critical thresholds to determine the status of the resource. The critical threshold comes into effect if the warning threshold is set to the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

winA3ConfigLVolAutoMiscMode 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1.17
&This attribute determines which value (throughput or queue-length) should be calculated by this metric. The option throughput(1) is expressed in KBytes/sec. The option queue-length(2) is expressed as an average number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER throughput(1), queue-length(2)  

winA3ConfigLVolAutoMiscWarn 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1.18
&Default warning threshold for the miscellaneous data monitoring of any logical volume watcher created by the auto watcher. This value represents a rising threshold and must be greater than 0.0, but cannot be greater than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigLVolAutoMiscCrit 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1.19
&Default critical threshold for the miscellaneous data monitoring of any logical volume watcher created by the auto watcher. This value represents a rising threshold and must be greater than 0.0, but cannot be less than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigLVolAutoMiscMonitor 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1.20
&Default monitor level for the miscellaneous data monitoring of any logical volume watcher created by the auto watcher. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning threshold to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical threshold to determine the status of the resource. If set to 4 (both), the agent evaluates both the warning and critical thresholds to determine the status of the resource. The critical threshold comes into effect if the warning threshold is set to the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

winA3ConfigLVolAutoFragmtMode 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1.21
&This attribute determines which mode of fragmentation (file or total) should be calculated. The option total-fragmentation(2) is only supported on Windows 2003/XP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER file-fragmentation(1), total-fragmentation(2)  

winA3ConfigLVolAutoFragmtInterval 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1.22
&Time, in hours, between collections of fragmentation information (always triggered by the next polling or a get request). The agent will not calculate the fragmentation every standard poll interval, because it is an expensive task. Valid range: 1 hour or greater, or -1 to disable the fragmentation calculation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigLVolAutoFragmtWarn 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1.23
&Default warning threshold, in percent, for the fragmentation monitoring of any logical volume watcher created by the auto watcher. This value represents a rising threshold and must be greater than 0, less than or equal to 100, but cannot be greater than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigLVolAutoFragmtCrit 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1.24
&Default critical threshold, in percent, for the fragmentation monitoring of any logical volume watcher created by the auto watcher. This value represents a rising threshold and must be greater than 0, less than or equal to 100, but cannot be less than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigLVolAutoFragmtMonitor 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1.25
&Default monitor level for the fragmentation monitoring of any logical volume watcher created by the auto watcher. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning threshold to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical threshold to determine the status of the resource. If set to 4 (both), the agent evaluates both the warning and critical thresholds to determine the status of the resource. The critical threshold comes into effect if the warning threshold is set to the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

winA3ConfigLVolAutoLossAction 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1.26
&Default loss action for any logical volume watcher created by the auto watcher. Specifies the action to take if the monitored logical volume is removed from the Windows System configuration. If set to 1 (remove), the agent automatically removes the watcher. If set to 2 (up), the agent sets all statuses to ok. If set to 3 (down-warning), the agent sets the loss and aggregate statuses to warning and all other statuses to ok. If set to 4 (down-critical), the agent sets the loss and aggregate statuses to critical and all other statuses to ok.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

winA3ConfigLVolAutoButton 1.3.6.1.4.1.791.2.10.2.90.1.5.32.1.27
&This attribute is used to enable/disable or remove the logical volume auto watcher. If set to 1 (active), the agent re-enables the watcher previously locked either explicitly or implicitly by exceeding the maximum number of allowed matches. Each set request with this value will cause the agent to process the auto watcher. If set to 3 (locked), the agent disables the auto watcher. If set to 2 (remove), the agent removes the auto watcher from the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), remove(2), locked(3)  

winA3ConfigMntPollInterval 1.3.6.1.4.1.791.2.10.2.90.1.6.1
&Time, in seconds, between collections of mount information. Valid range: 30 seconds or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigMntPollMethod 1.3.6.1.4.1.791.2.10.2.90.1.6.2
&Specifies how and when the agent collects mount information. If set to 1 (disabled), the agent does not retrieve the mount information (neither by polling nor by get request) and sets all statuses to passive or ok. If set to 2 (poll-interval-only), the agent only retrieves the information by polling, but not by get request. If set to 3 (poll-interval-and-query), the agent retrieves the information both by polling and by get request. If set to 4 (query-only), the agent retrieves the information only when a get request is made.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

winA3ConfigMntAutoPollInterval 1.3.6.1.4.1.791.2.10.2.90.1.6.3
&Time, in minutes, between the processing of the mount auto watchers. Valid range: -1 (suspended), 30 minutes or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigMntName 1.3.6.1.4.1.791.2.10.2.90.1.6.4
&Name of the mount for which to add or remove a watcher. If used as a filter element for auto discovery, this name can be a regular expression (case-insensitive). In this case, it restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigMntTarget 1.3.6.1.4.1.791.2.10.2.90.1.6.5
&The name of the logical volume currently mounted by this mount. This attribute is only used as a filter element for auto discovery and can be a regular expression (case-insensitive). It restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigMntClusterType 1.3.6.1.4.1.791.2.10.2.90.1.6.6
&Cluster type of the mount to be searched for during an auto discovery run. This attribute is only used when adding an auto watcher. If set to 1 (not-clustered), the search is restricted to not-clustered resources only. If set to 2 (clustered-active), the search is restricted to clustered-active resources only. If set to 3 (clustered-passive), the search is restricted to clustered-passive resources only. If set to 4 (any), the cluster type does not affect the search.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-clustered(1), clustered-active(2), clustered-passive(3), any(4)  

winA3ConfigMntDescription 1.3.6.1.4.1.791.2.10.2.90.1.6.7
&Default description for the mount watcher to add.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigMntAggLag 1.3.6.1.4.1.791.2.10.2.90.1.6.8
&Default aggregate lag setting for the mount watcher to add. Specifies the consecutive number of times at which any status is not in the ok state, before the aggregate status changes. This value must be greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigMntTargetMonitor 1.3.6.1.4.1.791.2.10.2.90.1.6.9
&Default monitor level for the target monitoring of the mount watcher to add. If set to 1 (do-not-monitor), the agent does not evaluate the actual state of the resource and sets the status to ok. If set to 2 (down-warning), the agent uses a warning severity if the resource is in bad condition. If set to 3 (down-critical), the agent uses a critical severity if the resource is in bad condition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

winA3ConfigMntLossAction 1.3.6.1.4.1.791.2.10.2.90.1.6.10
&Default loss action for the mount watcher to add. Specifies the action to take if the monitored mount is removed from the Windows System configuration. If set to 1 (remove), the agent automatically removes the watcher. If set to 2 (up), the agent sets all statuses to ok. If set to 3 (down-warning), the agent sets the loss and aggregate statuses to warning and all other statuses to ok. If set to 4 (down-critical), the agent sets the loss and aggregate statuses to critical and all other statuses to ok.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

winA3ConfigMntAutoTableWatcherName 1.3.6.1.4.1.791.2.10.2.90.1.6.11
&Name of the mount auto watcher to add or remove.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigMntAutoTableWatcherMatchType 1.3.6.1.4.1.791.2.10.2.90.1.6.12
&Default search algorithm for the mount auto watcher to add. The filter is the logical AND of all attributes used to identify or otherwise narrow down resources. If set to 1 (positive), the agent searches for mount resources that match the filter. If set to 2 (negative), the agent searches for mount resources that do not match the filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER positive(1), negative(2)  

winA3ConfigMntAutoTableWatcherLimit 1.3.6.1.4.1.791.2.10.2.90.1.6.13
&Default minimum number of matches that causes a lock of the mount auto watcher to add.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigMntButton 1.3.6.1.4.1.791.2.10.2.90.1.6.14
&This attribute is used to add or remove the mount watcher specified by the current setting of the watcher name attribute(s) in this group. If set to 2 (add), the agent adds the specified watcher to the status table using the current values of the remaining attributes as defaults. If set to 3 (remove), the agent removes the specified watcher from the status table. If set to 4 (add-auto), the agent adds the specified watcher to the auto configuration table using the current values of the remaining attributes as defaults. If set to 5 (remove-auto), the agent removes the specified watcher from the auto configuration table. This attribute cannot be set to 1 (none).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3), add-auto(4), remove-auto(5)  

winA3ConfigMntAutoCount 1.3.6.1.4.1.791.2.10.2.90.1.6.15
&Number of auto watchers in the mount auto configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

winA3ConfigMntAutoLocked 1.3.6.1.4.1.791.2.10.2.90.1.6.16
&Number of auto watchers in the mount auto configuration table which are currently locked.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

winA3ConfigMntAutoTable 1.3.6.1.4.1.791.2.10.2.90.1.6.17
&Configuration table containing a list of mount auto watchers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WinA3ConfigMntAutoEntry

winA3ConfigMntAutoEntry 1.3.6.1.4.1.791.2.10.2.90.1.6.17.1
&Entry in the mount auto watcher configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WinA3ConfigMntAutoEntry  

winA3ConfigMntAutoWatcherName 1.3.6.1.4.1.791.2.10.2.90.1.6.17.1.1
&Name of the mount auto watcher.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigMntAutoName 1.3.6.1.4.1.791.2.10.2.90.1.6.17.1.2
&Name of the mount to be searched for during an auto discovery run. This name is used as a filter element for auto discovery and can be a regular expression (case-insensitive). It restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigMntAutoTarget 1.3.6.1.4.1.791.2.10.2.90.1.6.17.1.3
&The name of the logical volume currently mounted by this mount. This attribute is used as a filter element for auto discovery and can be a regular expression (case-insensitive). It restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigMntAutoClusterType 1.3.6.1.4.1.791.2.10.2.90.1.6.17.1.4
&Cluster type of the mount to be searched for during an auto discovery run. If set to 1 (not-clustered), the search is restricted to not-clustered resources only. If set to 2 (clustered-active), the search is restricted to clustered-active resources only. If set to 3 (clustered-passive), the search is restricted to clustered-passive resources only. If set to 4 (any), the cluster type does not affect the search.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-clustered(1), clustered-active(2), clustered-passive(3), any(4)  

winA3ConfigMntAutoDescription 1.3.6.1.4.1.791.2.10.2.90.1.6.17.1.5
&Current description for the mount auto watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigMntAutoWatcherMatchType 1.3.6.1.4.1.791.2.10.2.90.1.6.17.1.6
&Current search algorithm for the mount auto watcher. The filter is the logical AND of all attributes used to identify or otherwise narrow down resources. If set to 1 (positive), the agent searches for mount resources that match the filter. If set to 2 (negative), the agent searches for mount resources that do not match the filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER positive(1), negative(2)  

winA3ConfigMntAutoWatcherLimit 1.3.6.1.4.1.791.2.10.2.90.1.6.17.1.7
&Current minimum number of matches that causes the mount auto watcher to be locked.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigMntAutoWatcherLastMatched 1.3.6.1.4.1.791.2.10.2.90.1.6.17.1.8
&Number of matches for the last mount auto discovery run.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

winA3ConfigMntAutoAggLag 1.3.6.1.4.1.791.2.10.2.90.1.6.17.1.9
&Current lag setting for the mount auto watcher. Specifies the consecutive number of times at which any status is not in the ok state, before the aggregate status changes. This value must be greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigMntAutoTargetMonitor 1.3.6.1.4.1.791.2.10.2.90.1.6.17.1.10
&Default monitor level for the target monitoring of any mount watcher created by the auto watcher. If set to 1 (do-not-monitor), the agent does not evaluate the actual state of the resource and sets the status to ok. If set to 2 (down-warning), the agent uses a warning severity if the resource is in bad condition. If set to 3 (down-critical), the agent uses a critical severity if the resource is in bad condition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

winA3ConfigMntAutoLossAction 1.3.6.1.4.1.791.2.10.2.90.1.6.17.1.11
&Default loss action for any mount watcher created by the auto watcher. Specifies the action to take if the monitored mount is removed from the Windows System configuration. If set to 1 (remove), the agent automatically removes the watcher. If set to 2 (up), the agent sets all statuses to ok. If set to 3 (down-warning), the agent sets the loss and aggregate statuses to warning and all other statuses to ok. If set to 4 (down-critical), the agent sets the loss and aggregate statuses to critical and all other statuses to ok.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

winA3ConfigMntAutoButton 1.3.6.1.4.1.791.2.10.2.90.1.6.17.1.12
&This attribute is used to enable/disable or remove the mount auto watcher. If set to 1 (active), the agent re-enables the watcher previously locked either explicitly or implicitly by exceeding the maximum number of allowed matches. Each set request with this value will cause the agent to process the auto watcher. If set to 3 (locked), the agent disables the auto watcher. If set to 2 (remove), the agent removes the auto watcher from the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), remove(2), locked(3)  

winA3ConfigDfsPollInterval 1.3.6.1.4.1.791.2.10.2.90.1.7.1
&Time, in seconds, between collections of distributed file system link information. Valid range: 30 seconds or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigDfsPollMethod 1.3.6.1.4.1.791.2.10.2.90.1.7.2
&Specifies how and when the agent collects distributed file system link information. If set to 1 (disabled), the agent does not retrieve the distributed file system link information (neither by polling nor by get request) and sets all statuses to passive or ok. If set to 2 (poll-interval-only), the agent only retrieves the information by polling, but not by get request. If set to 3 (poll-interval-and-query), the agent retrieves the information both by polling and by get request. If set to 4 (query-only), the agent retrieves the information only when a get request is made.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

winA3ConfigDfsAutoPollInterval 1.3.6.1.4.1.791.2.10.2.90.1.7.3
&Time, in minutes, between the processing of the distributed file system link auto watchers. Valid range: -1 (suspended), 30 minutes or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigDfsName 1.3.6.1.4.1.791.2.10.2.90.1.7.4
&Name of the distributed file system link for which to add or remove a watcher. A fully qualified Dfs name consists of the Dfs root name followed by the Dfs link name. These two names are concatenated by a back-slash. A single Dfs root name can also be used, allowing to monitor all Dfs links of this Dfs root. In that case the values are calculated as the sum of all DFS links of this DFS root and no loss action will be triggered if no Dfs link exists for this DFS root. If used as a filter element for auto discovery, this name can be a regular expression (case-insensitive). In this case, it restricts the resources to be searched for during an auto discovery run. Note that monitoring of DFS links is not applicable on Windows XP and on Windows 2000 Professional.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigDfsTargetsList 1.3.6.1.4.1.791.2.10.2.90.1.7.5
&A list of the targets (seperated by pipe signs), currently configured for this Dfs link. This attribute is only used as a filter element for auto discovery and can be a regular expression (case-insensitive). It restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigDfsDescription 1.3.6.1.4.1.791.2.10.2.90.1.7.6
&Default description for the distributed file system link watcher to add.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigDfsAggLag 1.3.6.1.4.1.791.2.10.2.90.1.7.7
&Default aggregate lag setting for the distributed file system link watcher to add. Specifies the consecutive number of times at which any status is not in the ok state, before the aggregate status changes. This value must be greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigDfsTargetsWarn 1.3.6.1.4.1.791.2.10.2.90.1.7.8
&Default warning threshold for the target monitoring of the distributed file system link watcher to add. This value represents a rising threshold and must be greater than 0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in winA3StatusDfsTargetsTotal, but cannot be greater than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigDfsTargetsCrit 1.3.6.1.4.1.791.2.10.2.90.1.7.9
&Default critical threshold for the target monitoring of the distributed file system link watcher to add. This value represents a rising threshold and must be greater than 0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in winA3StatusDfsTargetsTotal, but cannot be less than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigDfsTargetsMonitor 1.3.6.1.4.1.791.2.10.2.90.1.7.10
&Default monitor level for the target monitoring of the distributed file system link watcher to add. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning threshold to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical threshold to determine the status of the resource. If set to 4 (both), the agent evaluates both the warning and critical thresholds to determine the status of the resource. The critical threshold comes into effect if the warning threshold is set to the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

winA3ConfigDfsLossAction 1.3.6.1.4.1.791.2.10.2.90.1.7.11
&Default loss action for the distributed file system link watcher to add. Specifies the action to take if the monitored distributed file system link is removed from the Windows System configuration. If set to 1 (remove), the agent automatically removes the watcher. If set to 2 (up), the agent sets all statuses to ok. If set to 3 (down-warning), the agent sets the loss and aggregate statuses to warning and all other statuses to ok. If set to 4 (down-critical), the agent sets the loss and aggregate statuses to critical and all other statuses to ok.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

winA3ConfigDfsAutoTableWatcherName 1.3.6.1.4.1.791.2.10.2.90.1.7.12
&Name of the distributed file system link auto watcher to add or remove.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigDfsAutoTableWatcherMatchType 1.3.6.1.4.1.791.2.10.2.90.1.7.13
&Default search algorithm for the distributed file system link auto watcher to add. The filter is the logical AND of all attributes used to identify or otherwise narrow down resources. If set to 1 (positive), the agent searches for distributed file system link resources that match the filter. If set to 2 (negative), the agent searches for distributed file system link resources that do not match the filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER positive(1), negative(2)  

winA3ConfigDfsAutoTableWatcherLimit 1.3.6.1.4.1.791.2.10.2.90.1.7.14
&Default minimum number of matches that causes a lock of the distributed file system link auto watcher to add.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigDfsButton 1.3.6.1.4.1.791.2.10.2.90.1.7.15
&This attribute is used to add or remove the distributed file system link watcher specified by the current setting of the watcher name attribute(s) in this group. If set to 2 (add), the agent adds the specified watcher to the status table using the current values of the remaining attributes as defaults. If set to 3 (remove), the agent removes the specified watcher from the status table. If set to 4 (add-auto), the agent adds the specified watcher to the auto configuration table using the current values of the remaining attributes as defaults. If set to 5 (remove-auto), the agent removes the specified watcher from the auto configuration table. This attribute cannot be set to 1 (none).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3), add-auto(4), remove-auto(5)  

winA3ConfigDfsAutoCount 1.3.6.1.4.1.791.2.10.2.90.1.7.16
&Number of auto watchers in the distributed file system link auto configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

winA3ConfigDfsAutoLocked 1.3.6.1.4.1.791.2.10.2.90.1.7.17
&Number of auto watchers in the distributed file system link auto configuration table which are currently locked.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

winA3ConfigDfsAutoTable 1.3.6.1.4.1.791.2.10.2.90.1.7.18
&Configuration table containing a list of distributed file system link auto watchers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WinA3ConfigDfsAutoEntry

winA3ConfigDfsAutoEntry 1.3.6.1.4.1.791.2.10.2.90.1.7.18.1
&Entry in the distributed file system link auto watcher configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WinA3ConfigDfsAutoEntry  

winA3ConfigDfsAutoWatcherName 1.3.6.1.4.1.791.2.10.2.90.1.7.18.1.1
&Name of the distributed file system link auto watcher.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigDfsAutoName 1.3.6.1.4.1.791.2.10.2.90.1.7.18.1.2
&Name of the distributed file system link to be searched for during an auto discovery run. A fully qualified Dfs name consists of the Dfs root name followed by the Dfs link name. These two names are concatenated by a back-slash. This name is used as a filter element for auto discovery and can be a regular expression (case-insensitive). It restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigDfsAutoTargetsList 1.3.6.1.4.1.791.2.10.2.90.1.7.18.1.3
&A list of the targets (seperated by pipe signs), currently configured for this Dfs link. This attribute is used as a filter element for auto discovery and can be a regular expression (case-insensitive). It restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigDfsAutoDescription 1.3.6.1.4.1.791.2.10.2.90.1.7.18.1.4
&Current description for the distributed file system link auto watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigDfsAutoWatcherMatchType 1.3.6.1.4.1.791.2.10.2.90.1.7.18.1.5
&Current search algorithm for the distributed file system link auto watcher. The filter is the logical AND of all attributes used to identify or otherwise narrow down resources. If set to 1 (positive), the agent searches for distributed file system link resources that match the filter. If set to 2 (negative), the agent searches for distributed file system link resources that do not match the filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER positive(1), negative(2)  

winA3ConfigDfsAutoWatcherLimit 1.3.6.1.4.1.791.2.10.2.90.1.7.18.1.6
&Current minimum number of matches that causes the distributed file system link auto watcher to be locked.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigDfsAutoWatcherLastMatched 1.3.6.1.4.1.791.2.10.2.90.1.7.18.1.7
&Number of matches for the last distributed file system link auto discovery run.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

winA3ConfigDfsAutoAggLag 1.3.6.1.4.1.791.2.10.2.90.1.7.18.1.8
&Current lag setting for the distributed file system link auto watcher. Specifies the consecutive number of times at which any status is not in the ok state, before the aggregate status changes. This value must be greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigDfsAutoTargetsWarn 1.3.6.1.4.1.791.2.10.2.90.1.7.18.1.9
&Default warning threshold for the target monitoring of any distributed file system link watcher created by the auto watcher. This value represents a rising threshold and must be greater than 0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in winA3StatusDfsTargetsTotal, but cannot be greater than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigDfsAutoTargetsCrit 1.3.6.1.4.1.791.2.10.2.90.1.7.18.1.10
&Default critical threshold for the target monitoring of any distributed file system link watcher created by the auto watcher. This value represents a rising threshold and must be greater than 0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in winA3StatusDfsTargetsTotal, but cannot be less than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigDfsAutoTargetsMonitor 1.3.6.1.4.1.791.2.10.2.90.1.7.18.1.11
&Default monitor level for the target monitoring of any distributed file system link watcher created by the auto watcher. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning threshold to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical threshold to determine the status of the resource. If set to 4 (both), the agent evaluates both the warning and critical thresholds to determine the status of the resource. The critical threshold comes into effect if the warning threshold is set to the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

winA3ConfigDfsAutoLossAction 1.3.6.1.4.1.791.2.10.2.90.1.7.18.1.12
&Default loss action for any distributed file system link watcher created by the auto watcher. Specifies the action to take if the monitored distributed file system link is removed from the Windows System configuration. If set to 1 (remove), the agent automatically removes the watcher. If set to 2 (up), the agent sets all statuses to ok. If set to 3 (down-warning), the agent sets the loss and aggregate statuses to warning and all other statuses to ok. If set to 4 (down-critical), the agent sets the loss and aggregate statuses to critical and all other statuses to ok.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

winA3ConfigDfsAutoButton 1.3.6.1.4.1.791.2.10.2.90.1.7.18.1.13
&This attribute is used to enable/disable or remove the distributed file system link auto watcher. If set to 1 (active), the agent re-enables the watcher previously locked either explicitly or implicitly by exceeding the maximum number of allowed matches. Each set request with this value will cause the agent to process the auto watcher. If set to 3 (locked), the agent disables the auto watcher. If set to 2 (remove), the agent removes the auto watcher from the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), remove(2), locked(3)  

winA3ConfigQuotaPollInterval 1.3.6.1.4.1.791.2.10.2.90.1.8.1
&Time, in seconds, between collections of quota information. Valid range: 30 seconds or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigQuotaPollMethod 1.3.6.1.4.1.791.2.10.2.90.1.8.2
&Specifies how and when the agent collects quota information. If set to 1 (disabled), the agent does not retrieve the quota information (neither by polling nor by get request) and sets all statuses to passive or ok. If set to 2 (poll-interval-only), the agent only retrieves the information by polling, but not by get request. If set to 3 (poll-interval-and-query), the agent retrieves the information both by polling and by get request. If set to 4 (query-only), the agent retrieves the information only when a get request is made.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

winA3ConfigQuotaAutoPollInterval 1.3.6.1.4.1.791.2.10.2.90.1.8.3
&Time, in minutes, between the processing of the quota auto watchers. Valid range: -1 (suspended), 30 minutes or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigQuotaLVolName 1.3.6.1.4.1.791.2.10.2.90.1.8.4
&LVol name part of the quota for which to add or remove a watcher. A fully qualified name specifies the logical volume on which this quota exists. If used as a filter element for auto discovery, this name can be a regular expression (case-insensitive). In this case, it restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigQuotaUserName 1.3.6.1.4.1.791.2.10.2.90.1.8.5
&User name part of the quota for which to add or remove a watcher. A fully qualified name specifies the user for whom this quota exists and is in the form 'domainName\userName' or 'userName@domainName'. If used as a filter element for auto discovery, this name can be a regular expression (case-insensitive). In this case, it restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigQuotaWarnLevel 1.3.6.1.4.1.791.2.10.2.90.1.8.6
&The warning level, in kilobytes, for this quota, as defined in the Windows quota management. A value of zero means 'No Limit'. This attribute is only used as a filter element for auto discovery and can be greater or equal to 0, filtering out all values being greater or equal. It restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigQuotaLimit 1.3.6.1.4.1.791.2.10.2.90.1.8.7
&The limit, in kilobytes, for this quota, as defined in the Windows quota management. A value of zero means 'No Limit'. This attribute is only used as a filter element for auto discovery and can be greater or equal to 0, filtering out all values being greater or equal. It restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigQuotaDescription 1.3.6.1.4.1.791.2.10.2.90.1.8.8
&Default description for the quota watcher to add.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigQuotaAggLag 1.3.6.1.4.1.791.2.10.2.90.1.8.9
&Default aggregate lag setting for the quota watcher to add. Specifies the consecutive number of times at which any status is not in the ok state, before the aggregate status changes. This value must be greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigQuotaSizeWarn 1.3.6.1.4.1.791.2.10.2.90.1.8.10
&Default warning threshold, in kilobytes, for the quota size utilization monitoring of the quota watcher to add. The active warning threshold is derived from this value and represents a rising threshold. The derived value must be greater than 0.0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in winA3StatusQuotaSizeTotal, but cannot be greater than the active critical threshold. These constraints will be maintained by the agent during all configuration actions. The threshold can be specified as either an absolute value (n) or a percentage (n%). The value of winA3StatusQuotaSizeTotal will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigQuotaSizeCrit 1.3.6.1.4.1.791.2.10.2.90.1.8.11
&Default critical threshold, in kilobytes, for the quota size utilization monitoring of the quota watcher to add. The active critical threshold is derived from this value and represents a rising threshold. The derived value must be greater than 0.0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in winA3StatusQuotaSizeTotal, but cannot be less than the active warning threshold. These constraints will be maintained by the agent during all configuration actions. The threshold can be specified as either an absolute value (n) or a percentage (n%). The value of winA3StatusQuotaSizeTotal will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigQuotaSizeMonitor 1.3.6.1.4.1.791.2.10.2.90.1.8.12
&Default monitor level for the quota size utilization monitoring of the quota watcher to add. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning threshold to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical threshold to determine the status of the resource. If set to 4 (both), the agent evaluates both the warning and critical thresholds to determine the status of the resource. The critical threshold comes into effect if the warning threshold is set to the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

winA3ConfigQuotaLossAction 1.3.6.1.4.1.791.2.10.2.90.1.8.13
&Default loss action for the quota watcher to add. Specifies the action to take if the monitored quota is removed from the Windows System configuration. If set to 1 (remove), the agent automatically removes the watcher. If set to 2 (up), the agent sets all statuses to ok. If set to 3 (down-warning), the agent sets the loss and aggregate statuses to warning and all other statuses to ok. If set to 4 (down-critical), the agent sets the loss and aggregate statuses to critical and all other statuses to ok.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

winA3ConfigQuotaAutoTableWatcherName 1.3.6.1.4.1.791.2.10.2.90.1.8.14
&Name of the quota auto watcher to add or remove.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigQuotaAutoTableWatcherMatchType 1.3.6.1.4.1.791.2.10.2.90.1.8.15
&Default search algorithm for the quota auto watcher to add. The filter is the logical AND of all attributes used to identify or otherwise narrow down resources. If set to 1 (positive), the agent searches for quota resources that match the filter. If set to 2 (negative), the agent searches for quota resources that do not match the filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER positive(1), negative(2)  

winA3ConfigQuotaAutoTableWatcherLimit 1.3.6.1.4.1.791.2.10.2.90.1.8.16
&Default minimum number of matches that causes a lock of the quota auto watcher to add.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigQuotaButton 1.3.6.1.4.1.791.2.10.2.90.1.8.17
&This attribute is used to add or remove the quota watcher specified by the current setting of the watcher name attribute(s) in this group. If set to 2 (add), the agent adds the specified watcher to the status table using the current values of the remaining attributes as defaults. If set to 3 (remove), the agent removes the specified watcher from the status table. If set to 4 (add-auto), the agent adds the specified watcher to the auto configuration table using the current values of the remaining attributes as defaults. If set to 5 (remove-auto), the agent removes the specified watcher from the auto configuration table. This attribute cannot be set to 1 (none).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3), add-auto(4), remove-auto(5)  

winA3ConfigQuotaAutoCount 1.3.6.1.4.1.791.2.10.2.90.1.8.18
&Number of auto watchers in the quota auto configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

winA3ConfigQuotaAutoLocked 1.3.6.1.4.1.791.2.10.2.90.1.8.19
&Number of auto watchers in the quota auto configuration table which are currently locked.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

winA3ConfigQuotaAutoTable 1.3.6.1.4.1.791.2.10.2.90.1.8.20
&Configuration table containing a list of quota auto watchers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WinA3ConfigQuotaAutoEntry

winA3ConfigQuotaAutoEntry 1.3.6.1.4.1.791.2.10.2.90.1.8.20.1
&Entry in the quota auto watcher configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WinA3ConfigQuotaAutoEntry  

winA3ConfigQuotaAutoWatcherName 1.3.6.1.4.1.791.2.10.2.90.1.8.20.1.1
&Name of the quota auto watcher.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigQuotaAutoLVolName 1.3.6.1.4.1.791.2.10.2.90.1.8.20.1.2
&LVol name part of the quota to be searched for during an auto discovery run. A fully qualified name specifies the logical volume on which this quota exists. This name is used as a filter element for auto discovery and can be a regular expression (case-insensitive). It restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigQuotaAutoUserName 1.3.6.1.4.1.791.2.10.2.90.1.8.20.1.3
&User name part of the quota to be searched for during an auto discovery run. A fully qualified name specifies the user for whom this quota exists and is in the form 'domainName\userName' or 'userName@domainName'. This name is used as a filter element for auto discovery and can be a regular expression (case-insensitive). It restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigQuotaAutoWarnLevel 1.3.6.1.4.1.791.2.10.2.90.1.8.20.1.4
&The warning level, in kilobytes, for this quota, as defined in the Windows quota management. A value of zero means 'No Limit'. This attribute is used as a filter element for auto discovery and can be greater or equal to 0, filtering out all values being greater or equal. It restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigQuotaAutoLimit 1.3.6.1.4.1.791.2.10.2.90.1.8.20.1.5
&The limit, in kilobytes, for this quota, as defined in the Windows quota management. A value of zero means 'No Limit'. This attribute is used as a filter element for auto discovery and can be greater or equal to 0, filtering out all values being greater or equal. It restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigQuotaAutoDescription 1.3.6.1.4.1.791.2.10.2.90.1.8.20.1.6
&Current description for the quota auto watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigQuotaAutoWatcherMatchType 1.3.6.1.4.1.791.2.10.2.90.1.8.20.1.7
&Current search algorithm for the quota auto watcher. The filter is the logical AND of all attributes used to identify or otherwise narrow down resources. If set to 1 (positive), the agent searches for quota resources that match the filter. If set to 2 (negative), the agent searches for quota resources that do not match the filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER positive(1), negative(2)  

winA3ConfigQuotaAutoWatcherLimit 1.3.6.1.4.1.791.2.10.2.90.1.8.20.1.8
&Current minimum number of matches that causes the quota auto watcher to be locked.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigQuotaAutoWatcherLastMatched 1.3.6.1.4.1.791.2.10.2.90.1.8.20.1.9
&Number of matches for the last quota auto discovery run.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

winA3ConfigQuotaAutoAggLag 1.3.6.1.4.1.791.2.10.2.90.1.8.20.1.10
&Current lag setting for the quota auto watcher. Specifies the consecutive number of times at which any status is not in the ok state, before the aggregate status changes. This value must be greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigQuotaAutoSizeWarn 1.3.6.1.4.1.791.2.10.2.90.1.8.20.1.11
&Default warning threshold, in kilobytes, for the quota size utilization monitoring of any quota watcher created by the auto watcher. The active warning threshold is derived from this value and represents a rising threshold. The derived value must be greater than 0.0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in winA3StatusQuotaSizeTotal, but cannot be greater than the active critical threshold. These constraints will be maintained by the agent during all configuration actions. The threshold can be specified as either an absolute value (n) or a percentage (n%). The value of winA3StatusQuotaSizeTotal will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigQuotaAutoSizeCrit 1.3.6.1.4.1.791.2.10.2.90.1.8.20.1.12
&Default critical threshold, in kilobytes, for the quota size utilization monitoring of any quota watcher created by the auto watcher. The active critical threshold is derived from this value and represents a rising threshold. The derived value must be greater than 0.0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in winA3StatusQuotaSizeTotal, but cannot be less than the active warning threshold. These constraints will be maintained by the agent during all configuration actions. The threshold can be specified as either an absolute value (n) or a percentage (n%). The value of winA3StatusQuotaSizeTotal will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigQuotaAutoSizeMonitor 1.3.6.1.4.1.791.2.10.2.90.1.8.20.1.13
&Default monitor level for the quota size utilization monitoring of any quota watcher created by the auto watcher. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning threshold to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical threshold to determine the status of the resource. If set to 4 (both), the agent evaluates both the warning and critical thresholds to determine the status of the resource. The critical threshold comes into effect if the warning threshold is set to the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

winA3ConfigQuotaAutoLossAction 1.3.6.1.4.1.791.2.10.2.90.1.8.20.1.14
&Default loss action for any quota watcher created by the auto watcher. Specifies the action to take if the monitored quota is removed from the Windows System configuration. If set to 1 (remove), the agent automatically removes the watcher. If set to 2 (up), the agent sets all statuses to ok. If set to 3 (down-warning), the agent sets the loss and aggregate statuses to warning and all other statuses to ok. If set to 4 (down-critical), the agent sets the loss and aggregate statuses to critical and all other statuses to ok.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

winA3ConfigQuotaAutoButton 1.3.6.1.4.1.791.2.10.2.90.1.8.20.1.15
&This attribute is used to enable/disable or remove the quota auto watcher. If set to 1 (active), the agent re-enables the watcher previously locked either explicitly or implicitly by exceeding the maximum number of allowed matches. Each set request with this value will cause the agent to process the auto watcher. If set to 3 (locked), the agent disables the auto watcher. If set to 2 (remove), the agent removes the auto watcher from the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), remove(2), locked(3)  

winA3ConfigDirPollInterval 1.3.6.1.4.1.791.2.10.2.90.1.9.1
&Time, in seconds, between collections of directory information. Valid range: 30 seconds or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigDirPollMethod 1.3.6.1.4.1.791.2.10.2.90.1.9.2
&Specifies how and when the agent collects directory information. If set to 1 (disabled), the agent does not retrieve the directory information (neither by polling nor by get request) and sets all statuses to passive or ok. If set to 2 (poll-interval-only), the agent only retrieves the information by polling, but not by get request. If set to 3 (poll-interval-and-query), the agent retrieves the information both by polling and by get request. If set to 4 (query-only), the agent retrieves the information only when a get request is made.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

winA3ConfigDirWatcherName 1.3.6.1.4.1.791.2.10.2.90.1.9.3
&An arbitrary name for the watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigDirName 1.3.6.1.4.1.791.2.10.2.90.1.9.4
&Name of the directory for which to add or remove a watcher. This must be a fully qualified name that may contain environment variables.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigDirRecursivePolicy 1.3.6.1.4.1.791.2.10.2.90.1.9.5
&If set to yes(2), the scope of the watcher, to calculate the values from, is the complete subtree of the given directory. If set to no(1), the scope is just the (flat) directory.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

winA3ConfigDirDescription 1.3.6.1.4.1.791.2.10.2.90.1.9.6
&Default description for the directory watcher to add.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigDirAggLag 1.3.6.1.4.1.791.2.10.2.90.1.9.7
&Default aggregate lag setting for the directory watcher to add. Specifies the consecutive number of times at which any status is not in the ok state, before the aggregate status changes. This value must be greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigDirSizeWarnMin 1.3.6.1.4.1.791.2.10.2.90.1.9.8
&Default warning minimum threshold, in kilobytes, for the size utilization monitoring of the directory watcher to add. This value represents a declining threshold and must be equal to or greater than 0.0, equal to or greater than the critical minimum threshold, but cannot be greater than the warning maximum threshold. A value of -1 disables the evaluation of this threshold. The threshold can be specified as either an absolute value (n) or a percentage (n%). The value of winA3StatusDirSizeTotal will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigDirSizeWarnMax 1.3.6.1.4.1.791.2.10.2.90.1.9.9
&Default warning maximum threshold, in kilobytes, for the size utilization monitoring of the directory watcher to add. This value represents a rising threshold and must be equal to or greater than 0.0, equal to or greater than the warning minimum threshold, but cannot be greater than the critical maximum threshold. A value of -1 disables the evaluation of this threshold. The threshold can be specified as either an absolute value (n) or a percentage (n%). The value of winA3StatusDirSizeTotal will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigDirSizeCritMin 1.3.6.1.4.1.791.2.10.2.90.1.9.10
&Default critical minimum threshold, in kilobytes, for the size utilization monitoring of the directory watcher to add. This value represents a declining threshold and must be equal to or greater than 0.0, but cannot be greater than the warning minimum threshold. A value of -1 disables the evaluation of this threshold. The threshold can be specified as either an absolute value (n) or a percentage (n%). The value of winA3StatusDirSizeTotal will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigDirSizeCritMax 1.3.6.1.4.1.791.2.10.2.90.1.9.11
&Default critical maximum threshold, in kilobytes, for the size utilization monitoring of the directory watcher to add. This value represents a rising threshold and must be equal to or greater than 0.0, but cannot be less than the warning maximum threshold. A value of -1 disables the evaluation of this threshold. The threshold can be specified as either an absolute value (n) or a percentage (n%). The value of winA3StatusDirSizeTotal will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigDirSizeMonitor 1.3.6.1.4.1.791.2.10.2.90.1.9.12
&Default monitor level for the size utilization monitoring of the directory watcher to add. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning thresholds (both minimum and maximum) to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical thresholds (both minimum and maximum) to determine the status of the resource. If set to 4 (minimum-only), the agent evaluates only the minimum thresholds (both warning and critical) to determine the status of the resource. If set to 5 (maximum-only), the agent evaluates only the maximum thresholds (both warning and critical) to determine the status of the resource. If set to 6 (all), the agent evaluates all thresholds to determine the status of the resource.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), minimum-only(4), maximum-only(5), all(6)  

winA3ConfigDirSizeDWarn 1.3.6.1.4.1.791.2.10.2.90.1.9.13
&Default warning threshold, in kilobytes, for the delta size utilization monitoring of the directory watcher to add. The active warning threshold is derived from this value and represents a rising threshold. The derived value must be greater than 0.0, but cannot be greater than the active critical threshold. These constraints will be maintained by the agent during all configuration actions. The threshold can be specified as either an absolute value or a percentage and can denote a growth, shrinkage or change in either direction: Absolute shrinkage (n-), absolute growth (n+), absolute change in either direction (n), percentage shrinkage (n%-), percentage growth (n%+), or percentage change in either direction (n%). The value of winA3StatusDirSizeTotal will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigDirSizeDCrit 1.3.6.1.4.1.791.2.10.2.90.1.9.14
&Default critical threshold, in kilobytes, for the delta size utilization monitoring of the directory watcher to add. The active critical threshold is derived from this value and represents a rising threshold. The derived value must be greater than 0.0, but cannot be less than the active warning threshold. These constraints will be maintained by the agent during all configuration actions. The threshold can be specified as either an absolute value or a percentage and can denote a growth, shrinkage or change in either direction: Absolute shrinkage (n-), absolute growth (n+), absolute change in either direction (n), percentage shrinkage (n%-), percentage growth (n%+), or percentage change in either direction (n%). The value of winA3StatusDirSizeTotal will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigDirSizeDMonitor 1.3.6.1.4.1.791.2.10.2.90.1.9.15
&Default monitor level for the delta size utilization monitoring of the directory watcher to add. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning threshold to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical threshold to determine the status of the resource. If set to 4 (both), the agent evaluates both the warning and critical thresholds to determine the status of the resource. The critical threshold comes into effect if the warning threshold is set to the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

winA3ConfigDirEntriesWarnMin 1.3.6.1.4.1.791.2.10.2.90.1.9.16
&Default warning minimum threshold for the number of file and/or directory entries monitoring of the directory watcher to add. This value represents a declining threshold and must be equal to or greater than 0.0, equal to or greater than the critical minimum threshold, but cannot be greater than the warning maximum threshold. A value of -1 disables the evaluation of this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigDirEntriesWarnMax 1.3.6.1.4.1.791.2.10.2.90.1.9.17
&Default warning maximum threshold for the number of file and/or directory entries monitoring of the directory watcher to add. This value represents a rising threshold and must be equal to or greater than 0.0, equal to or greater than the warning minimum threshold, but cannot be greater than the critical maximum threshold. A value of -1 disables the evaluation of this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigDirEntriesCritMin 1.3.6.1.4.1.791.2.10.2.90.1.9.18
&Default critical minimum threshold for the number of file and/or directory entries monitoring of the directory watcher to add. This value represents a declining threshold and must be equal to or greater than 0.0, but cannot be greater than the warning minimum threshold. A value of -1 disables the evaluation of this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigDirEntriesCritMax 1.3.6.1.4.1.791.2.10.2.90.1.9.19
&Default critical maximum threshold for the number of file and/or directory entries monitoring of the directory watcher to add. This value represents a rising threshold and must be equal to or greater than 0.0, but cannot be less than the warning maximum threshold. A value of -1 disables the evaluation of this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigDirEntriesMonitor 1.3.6.1.4.1.791.2.10.2.90.1.9.20
&Default monitor level for the number of file and/or directory entries monitoring of the directory watcher to add. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning thresholds (both minimum and maximum) to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical thresholds (both minimum and maximum) to determine the status of the resource. If set to 4 (minimum-only), the agent evaluates only the minimum thresholds (both warning and critical) to determine the status of the resource. If set to 5 (maximum-only), the agent evaluates only the maximum thresholds (both warning and critical) to determine the status of the resource. If set to 6 (all), the agent evaluates all thresholds to determine the status of the resource.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), minimum-only(4), maximum-only(5), all(6)  

winA3ConfigDirTimeMode 1.3.6.1.4.1.791.2.10.2.90.1.9.21
&This attribute determines which mode of time (modification, access or creation) should be used for the time monitoring.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER modification-time(1), access-time(2), creation-time(3)  

winA3ConfigDirTimeInterval 1.3.6.1.4.1.791.2.10.2.90.1.9.22
&Time, in seconds, defining the time frame during which the time monitoring is performed. Dependend from the policy, the status is set to 'down' if the time interval is elapsed and the time value changed or changed not. A value of zero stands for an infinite interval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigDirTimePolicy 1.3.6.1.4.1.791.2.10.2.90.1.9.23
&Default monitor policy for the time monitoring of the directory watcher to add. The policy indicates the expected behaviour of the time value during the given time interval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER should-not-change(1), should-change(2)  

winA3ConfigDirTimeMonitor 1.3.6.1.4.1.791.2.10.2.90.1.9.24
&Default monitor level for the time monitoring of the directory watcher to add. If set to 1 (do-not-monitor), the agent does not evaluate the actual state of the resource and sets the status to ok. If set to 2 (down-warning), the agent uses a warning severity if the resource is in bad condition. If set to 3 (down-critical), the agent uses a critical severity if the resource is in bad condition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

winA3ConfigDirExistPolicy 1.3.6.1.4.1.791.2.10.2.90.1.9.25
&Default monitor policy for the existence monitoring of the directory watcher to add. Specifies how the agent should evaluate the presence or absence of the monitored resource in order to determine whether the resource is in good condition. If set to 1 (should-exist), the resource is expected to be existent. If set to 2 (should-not-exist), the resource is expected to be nonexistent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

winA3ConfigDirExistMonitor 1.3.6.1.4.1.791.2.10.2.90.1.9.26
&Default monitor level for the existence monitoring of the directory watcher to add. If set to 1 (do-not-monitor), the agent does not evaluate the actual state of the resource and sets the status to ok. If set to 2 (down-warning), the agent uses a warning severity if the resource is in bad condition. If set to 3 (down-critical), the agent uses a critical severity if the resource is in bad condition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

winA3ConfigDirButton 1.3.6.1.4.1.791.2.10.2.90.1.9.27
&This attribute is used to add or remove the directory watcher specified by the current setting of the watcher name attribute(s) in this group. If set to 2 (add), the agent adds the specified watcher to the status table using the current values of the remaining attributes as defaults. If set to 3 (remove), the agent removes the specified watcher from the status table. This attribute cannot be set to 1 (none).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3)  

winA3ConfigFilePollInterval 1.3.6.1.4.1.791.2.10.2.90.1.10.1
&Time, in seconds, between collections of file information. Valid range: 30 seconds or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigFilePollMethod 1.3.6.1.4.1.791.2.10.2.90.1.10.2
&Specifies how and when the agent collects file information. If set to 1 (disabled), the agent does not retrieve the file information (neither by polling nor by get request) and sets all statuses to passive or ok. If set to 2 (poll-interval-only), the agent only retrieves the information by polling, but not by get request. If set to 3 (poll-interval-and-query), the agent retrieves the information both by polling and by get request. If set to 4 (query-only), the agent retrieves the information only when a get request is made.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

winA3ConfigFileWatcherName 1.3.6.1.4.1.791.2.10.2.90.1.10.3
&An arbitrary name for the watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigFileMatchType 1.3.6.1.4.1.791.2.10.2.90.1.10.4
&Default search algorithm for the file watcher. The filter is the logical AND of all attributes used to identify or otherwise narrow down resources. If the value of one of these attributes includes 'wildcards', then the watcher will basically behave like a one-to-many watcher, i.e. it may monitor two or more resources simultaneously. If set to 1 (positive-regular-expression), the agent searches for file resources that match the filter as a regular expression (case-insensitive). If set to 2 (negative-regular-expression), the agent searches for file resources that do not match the filter as a regular expression (case-insensitive). If set to 3 (positive-string-compare), the agent searches for file resources that match the filter as string comparison (case-insensitive). If set to 4 (negative-string-compare), the agent searches for file resources that do not match the filter as string comparison (case-insensitive).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER positive-regular-expression(1), negative-regular-expression(2), positive-string-compare(3), negative-string-compare(4)  

winA3ConfigFileName 1.3.6.1.4.1.791.2.10.2.90.1.10.5
&Name of the file for which to add or remove a watcher. This name may contain environment variables. This name is used as a filter element for one-to-many monitoring (one watcher monitors several resources simultaneously). The file name (not the path) can be a regular expression (case-insensitive). The expression '.*' always matches any string, independent from the match type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigFileEvalPolicy 1.3.6.1.4.1.791.2.10.2.90.1.10.6
&Default evaluation policy for the file watcher. Defines how metric values will be calculated and 'culprits' be determined if two or more file resources fall into the monitoring scope of a one-to-many watcher. If set to 1 (individual), metric values will be set to the worst values (lowest and/or highest) of all file instances; if the value of a metric violates the threshold condition, the respective 'culprits' list will contain all instances individually violating the most severe threshold. If set to 2 (min), metric values will be set to the lowest (minimum) values of all file instances; if the value of a metric violates the threshold condition, the respective 'culprits' list will contain all instances having the same minimum value. If set to 3 (max), metric values will be set to the highest (maximum) values of all file instances; if the value of a metric violates the threshold condition, the respective 'culprits' list will contain all instances having the same maximum value. If set to 4 (sum), metric values will be set to the cumulative values (sum) of all file instances; if the value of a metric violates the threshold condition, the respective 'culprits' list will contain all instances. If set to 5 (avg), metric values will be set to the average values of all file instances; if the value of a metric violates the threshold condition, the respective 'culprits' list will contain all instances individually violating the most severe threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER individual(1), min(2), max(3), sum(4), avg(5)  

winA3ConfigFileDescription 1.3.6.1.4.1.791.2.10.2.90.1.10.7
&Default description for the file watcher to add.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigFileAggLag 1.3.6.1.4.1.791.2.10.2.90.1.10.8
&Default aggregate lag setting for the file watcher to add. Specifies the consecutive number of times at which any status is not in the ok state, before the aggregate status changes. This value must be greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigFileInstMin 1.3.6.1.4.1.791.2.10.2.90.1.10.9
&Default minimum threshold for the instance count monitoring of the file watcher to add. This value represents a declining threshold and must be equal to or greater than 0, but cannot be greater than the maximum threshold. A value of -1 disables the evaluation of this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigFileInstMax 1.3.6.1.4.1.791.2.10.2.90.1.10.10
&Default maximum threshold for the instance count monitoring of the file watcher to add. This value represents a rising threshold and must be equal to or greater than 0, but cannot be less than the minimum threshold. A value of -1 disables the evaluation of this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigFileInstMonitor 1.3.6.1.4.1.791.2.10.2.90.1.10.11
&Default monitor level for the instance count monitoring of the file watcher to add. If set to 1 (do-not-monitor), the agent does not evaluate the actual state of the resource and sets the status to ok. If set to 2 (down-warning), the agent uses a warning severity if the resource is in bad condition. If set to 3 (down-critical), the agent uses a critical severity if the resource is in bad condition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

winA3ConfigFileSizeWarnMin 1.3.6.1.4.1.791.2.10.2.90.1.10.12
&Default warning minimum threshold, in kilobytes, for the size utilization monitoring of the file watcher to add. This value represents a declining threshold and must be equal to or greater than 0.0, equal to or greater than the critical minimum threshold, but cannot be greater than the warning maximum threshold. A value of -1 disables the evaluation of this threshold. The threshold can be specified as either an absolute value (n) or a percentage (n%). The value of winA3StatusFileSizeTotal will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigFileSizeWarnMax 1.3.6.1.4.1.791.2.10.2.90.1.10.13
&Default warning maximum threshold, in kilobytes, for the size utilization monitoring of the file watcher to add. This value represents a rising threshold and must be equal to or greater than 0.0, equal to or greater than the warning minimum threshold, but cannot be greater than the critical maximum threshold. A value of -1 disables the evaluation of this threshold. The threshold can be specified as either an absolute value (n) or a percentage (n%). The value of winA3StatusFileSizeTotal will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigFileSizeCritMin 1.3.6.1.4.1.791.2.10.2.90.1.10.14
&Default critical minimum threshold, in kilobytes, for the size utilization monitoring of the file watcher to add. This value represents a declining threshold and must be equal to or greater than 0.0, but cannot be greater than the warning minimum threshold. A value of -1 disables the evaluation of this threshold. The threshold can be specified as either an absolute value (n) or a percentage (n%). The value of winA3StatusFileSizeTotal will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigFileSizeCritMax 1.3.6.1.4.1.791.2.10.2.90.1.10.15
&Default critical maximum threshold, in kilobytes, for the size utilization monitoring of the file watcher to add. This value represents a rising threshold and must be equal to or greater than 0.0, but cannot be less than the warning maximum threshold. A value of -1 disables the evaluation of this threshold. The threshold can be specified as either an absolute value (n) or a percentage (n%). The value of winA3StatusFileSizeTotal will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigFileSizeMonitor 1.3.6.1.4.1.791.2.10.2.90.1.10.16
&Default monitor level for the size utilization monitoring of the file watcher to add. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning thresholds (both minimum and maximum) to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical thresholds (both minimum and maximum) to determine the status of the resource. If set to 4 (minimum-only), the agent evaluates only the minimum thresholds (both warning and critical) to determine the status of the resource. If set to 5 (maximum-only), the agent evaluates only the maximum thresholds (both warning and critical) to determine the status of the resource. If set to 6 (all), the agent evaluates all thresholds to determine the status of the resource.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), minimum-only(4), maximum-only(5), all(6)  

winA3ConfigFileSizeDWarn 1.3.6.1.4.1.791.2.10.2.90.1.10.17
&Default warning threshold, in kilobytes, for the delta size utilization monitoring of the file watcher to add. The active warning threshold is derived from this value and represents a rising threshold. The derived value must be greater than 0.0, but cannot be greater than the active critical threshold. These constraints will be maintained by the agent during all configuration actions. The threshold can be specified as either an absolute value or a percentage and can denote a growth, shrinkage or change in either direction: Absolute shrinkage (n-), absolute growth (n+), absolute change in either direction (n), percentage shrinkage (n%-), percentage growth (n%+), or percentage change in either direction (n%). The value of winA3StatusFileSizeTotal will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigFileSizeDCrit 1.3.6.1.4.1.791.2.10.2.90.1.10.18
&Default critical threshold, in kilobytes, for the delta size utilization monitoring of the file watcher to add. The active critical threshold is derived from this value and represents a rising threshold. The derived value must be greater than 0.0, but cannot be less than the active warning threshold. These constraints will be maintained by the agent during all configuration actions. The threshold can be specified as either an absolute value or a percentage and can denote a growth, shrinkage or change in either direction: Absolute shrinkage (n-), absolute growth (n+), absolute change in either direction (n), percentage shrinkage (n%-), percentage growth (n%+), or percentage change in either direction (n%). The value of winA3StatusFileSizeTotal will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigFileSizeDMonitor 1.3.6.1.4.1.791.2.10.2.90.1.10.19
&Default monitor level for the delta size utilization monitoring of the file watcher to add. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning threshold to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical threshold to determine the status of the resource. If set to 4 (both), the agent evaluates both the warning and critical thresholds to determine the status of the resource. The critical threshold comes into effect if the warning threshold is set to the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

winA3ConfigFileTimeMode 1.3.6.1.4.1.791.2.10.2.90.1.10.20
&This attribute determines which mode of time (modification, access or creation) should be used for the time monitoring.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER modification-time(1), access-time(2), creation-time(3)  

winA3ConfigFileTimeInterval 1.3.6.1.4.1.791.2.10.2.90.1.10.21
&Time, in seconds, defining the time frame during which the time monitoring is performed. Dependend from the policy, the status is set to 'down' if the time interval is elapsed and the time value changed or changed not. A value of zero stands for an infinite interval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigFileTimePolicy 1.3.6.1.4.1.791.2.10.2.90.1.10.22
&Default monitor policy for the time monitoring of the file watcher to add. The policy indicates the expected behaviour of the time value during the given time interval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER should-not-change(1), should-change(2)  

winA3ConfigFileTimeMonitor 1.3.6.1.4.1.791.2.10.2.90.1.10.23
&Default monitor level for the time monitoring of the file watcher to add. If set to 1 (do-not-monitor), the agent does not evaluate the actual state of the resource and sets the status to ok. If set to 2 (down-warning), the agent uses a warning severity if the resource is in bad condition. If set to 3 (down-critical), the agent uses a critical severity if the resource is in bad condition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

winA3ConfigFileButton 1.3.6.1.4.1.791.2.10.2.90.1.10.24
&This attribute is used to add or remove the file watcher specified by the current setting of the watcher name attribute(s) in this group. If set to 2 (add), the agent adds the specified watcher to the status table using the current values of the remaining attributes as defaults. If set to 3 (remove), the agent removes the specified watcher from the status table. This attribute cannot be set to 1 (none).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3)  

winA3ConfigProcPollInterval 1.3.6.1.4.1.791.2.10.2.90.1.11.1
&Time, in seconds, between collections of process information. Valid range: 30 seconds or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigProcPollMethod 1.3.6.1.4.1.791.2.10.2.90.1.11.2
&Specifies how and when the agent collects process information. If set to 1 (disabled), the agent does not retrieve the process information (neither by polling nor by get request) and sets all statuses to passive or ok. If set to 2 (poll-interval-only), the agent only retrieves the information by polling, but not by get request. If set to 3 (poll-interval-and-query), the agent retrieves the information both by polling and by get request. If set to 4 (query-only), the agent retrieves the information only when a get request is made.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

winA3ConfigProcWatcherName 1.3.6.1.4.1.791.2.10.2.90.1.11.3
&An arbitrary name for the watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigProcMatchType 1.3.6.1.4.1.791.2.10.2.90.1.11.4
&Default search algorithm for the process watcher. The filter is the logical AND of all attributes used to identify or otherwise narrow down resources. If the value of one of these attributes includes 'wildcards', then the watcher will basically behave like a one-to-many watcher, i.e. it may monitor two or more resources simultaneously. If set to 1 (positive-regular-expression), the agent searches for process resources that match the filter as a regular expression (case-insensitive). If set to 2 (negative-regular-expression), the agent searches for process resources that do not match the filter as a regular expression (case-insensitive). If set to 3 (positive-string-compare), the agent searches for process resources that match the filter as string comparison (case-insensitive). If set to 4 (negative-string-compare), the agent searches for process resources that do not match the filter as string comparison (case-insensitive).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER positive-regular-expression(1), negative-regular-expression(2), positive-string-compare(3), negative-string-compare(4)  

winA3ConfigProcName 1.3.6.1.4.1.791.2.10.2.90.1.11.5
&Name of the process for which to add or remove a watcher. This name is used as a filter element for one-to-many monitoring (one watcher monitors several resources simultaneously) and can be a regular expression (case-insensitive). The expression '.*' always matches any string, independent from the match type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigProcPath 1.3.6.1.4.1.791.2.10.2.90.1.11.6
&Path name of the process for which to add or remove a watcher. This name is used as a filter element for one-to-many monitoring (one watcher monitors several resources simultaneously) and can be a regular expression (case-insensitive). The expression '.*' always matches any string, independent from the match type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigProcUser 1.3.6.1.4.1.791.2.10.2.90.1.11.7
&User name of the process for which to add or remove a watcher. This name is used as a filter element for one-to-many monitoring (one watcher monitors several resources simultaneously) and can be a regular expression (case-insensitive). The expression '.*' always matches any string, independent from the match type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigProcClusterResGroup 1.3.6.1.4.1.791.2.10.2.90.1.11.8
&Name of the cluster resource group of the process. For an unclustered process this attribute is set to '-'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigProcEvalPolicy 1.3.6.1.4.1.791.2.10.2.90.1.11.9
&Default evaluation policy for the process watcher. Defines how metric values will be calculated and 'culprits' be determined if two or more process resources fall into the monitoring scope of a one-to-many watcher. If set to 1 (individual), metric values will be set to the worst values (lowest and/or highest) of all process instances; if the value of a metric violates the threshold condition, the respective 'culprits' list will contain all instances individually violating the most severe threshold. If set to 2 (min), metric values will be set to the lowest (minimum) values of all process instances; if the value of a metric violates the threshold condition, the respective 'culprits' list will contain all instances having the same minimum value. If set to 3 (max), metric values will be set to the highest (maximum) values of all process instances; if the value of a metric violates the threshold condition, the respective 'culprits' list will contain all instances having the same maximum value. If set to 4 (sum), metric values will be set to the cumulative values (sum) of all process instances; if the value of a metric violates the threshold condition, the respective 'culprits' list will contain all instances. If set to 5 (avg), metric values will be set to the average values of all process instances; if the value of a metric violates the threshold condition, the respective 'culprits' list will contain all instances individually violating the most severe threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER individual(1), min(2), max(3), sum(4), avg(5)  

winA3ConfigProcDescription 1.3.6.1.4.1.791.2.10.2.90.1.11.10
&Default description for the process watcher to add.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigProcAggLag 1.3.6.1.4.1.791.2.10.2.90.1.11.11
&Default aggregate lag setting for the process watcher to add. Specifies the consecutive number of times at which any status is not in the ok state, before the aggregate status changes. This value must be greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigProcInstMin 1.3.6.1.4.1.791.2.10.2.90.1.11.12
&Default minimum threshold for the instance count monitoring of the process watcher to add. This value represents a declining threshold and must be equal to or greater than 0, but cannot be greater than the maximum threshold. A value of -1 disables the evaluation of this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigProcInstMax 1.3.6.1.4.1.791.2.10.2.90.1.11.13
&Default maximum threshold for the instance count monitoring of the process watcher to add. This value represents a rising threshold and must be equal to or greater than 0, but cannot be less than the minimum threshold. A value of -1 disables the evaluation of this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigProcInstMonitor 1.3.6.1.4.1.791.2.10.2.90.1.11.14
&Default monitor level for the instance count monitoring of the process watcher to add. If set to 1 (do-not-monitor), the agent does not evaluate the actual state of the resource and sets the status to ok. If set to 2 (down-warning), the agent uses a warning severity if the resource is in bad condition. If set to 3 (down-critical), the agent uses a critical severity if the resource is in bad condition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

winA3ConfigProcSizeWarnMin 1.3.6.1.4.1.791.2.10.2.90.1.11.15
&Default warning minimum threshold, in kilobytes, for the size utilization monitoring of the process watcher to add. This value represents a declining threshold and must be equal to or greater than 0.0, equal to or greater than the critical minimum threshold, but cannot be greater than the warning maximum threshold. A value of -1 disables the evaluation of this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigProcSizeWarnMax 1.3.6.1.4.1.791.2.10.2.90.1.11.16
&Default warning maximum threshold, in kilobytes, for the size utilization monitoring of the process watcher to add. This value represents a rising threshold and must be equal to or greater than 0.0, equal to or greater than the warning minimum threshold, but cannot be greater than the critical maximum threshold. A value of -1 disables the evaluation of this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigProcSizeCritMin 1.3.6.1.4.1.791.2.10.2.90.1.11.17
&Default critical minimum threshold, in kilobytes, for the size utilization monitoring of the process watcher to add. This value represents a declining threshold and must be equal to or greater than 0.0, but cannot be greater than the warning minimum threshold. A value of -1 disables the evaluation of this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigProcSizeCritMax 1.3.6.1.4.1.791.2.10.2.90.1.11.18
&Default critical maximum threshold, in kilobytes, for the size utilization monitoring of the process watcher to add. This value represents a rising threshold and must be equal to or greater than 0.0, but cannot be less than the warning maximum threshold. A value of -1 disables the evaluation of this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigProcSizeMonitor 1.3.6.1.4.1.791.2.10.2.90.1.11.19
&Default monitor level for the size utilization monitoring of the process watcher to add. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning thresholds (both minimum and maximum) to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical thresholds (both minimum and maximum) to determine the status of the resource. If set to 4 (minimum-only), the agent evaluates only the minimum thresholds (both warning and critical) to determine the status of the resource. If set to 5 (maximum-only), the agent evaluates only the maximum thresholds (both warning and critical) to determine the status of the resource. If set to 6 (all), the agent evaluates all thresholds to determine the status of the resource.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), minimum-only(4), maximum-only(5), all(6)  

winA3ConfigProcCpuInterval 1.3.6.1.4.1.791.2.10.2.90.1.11.20
&Time, in seconds, defining the total value to use as base for the calculation of the cpu value. This means, the cpu usage of a process, in seconds, refers to this interval. Valid range: Greater 0 or '-1'. If set to '-1', the cpu value is calculated as the cpu usage, in seconds, used up to now since the start of the agent or the creation of the watcher. If the cpu interval is set to a value greater than the current poll interval and this time is not elapsed for the first time, the CPU value is extrapolated. If the cpu interval is set to a value smaller than the current poll interval, the CPU value is calculated as the appropriate fraction of the value for the last poll interval. If the cpu interval is set to a value greater than the current poll interval and this time is already elapsed, the CPU value is calculated as the sliding sum, i.e. the sum of the value for the current poll interval and the value calculated at the last poll, weighted according to it's fraction of the cpu interval. If the interval is set to '-1', any overloading (%) used for the thresholds will be ignored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigProcCpuWarnMin 1.3.6.1.4.1.791.2.10.2.90.1.11.21
&Default warning minimum threshold, in seconds, for the cpu utilization monitoring of the process watcher to add. This value represents a declining threshold and must be equal to or greater than 0.0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in winA3StatusProcCpuInterval, equal to or greater than the critical minimum threshold, but cannot be greater than the warning maximum threshold. A value of -1 disables the evaluation of this threshold. The threshold can be specified as either an absolute value (n) or a percentage (n%). The value of winA3StatusProcCpuInterval will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigProcCpuWarnMax 1.3.6.1.4.1.791.2.10.2.90.1.11.22
&Default warning maximum threshold, in seconds, for the cpu utilization monitoring of the process watcher to add. This value represents a rising threshold and must be equal to or greater than 0.0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in winA3StatusProcCpuInterval, equal to or greater than the warning minimum threshold, but cannot be greater than the critical maximum threshold. A value of -1 disables the evaluation of this threshold. The threshold can be specified as either an absolute value (n) or a percentage (n%). The value of winA3StatusProcCpuInterval will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigProcCpuCritMin 1.3.6.1.4.1.791.2.10.2.90.1.11.23
&Default critical minimum threshold, in seconds, for the cpu utilization monitoring of the process watcher to add. This value represents a declining threshold and must be equal to or greater than 0.0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in winA3StatusProcCpuInterval, but cannot be greater than the warning minimum threshold. A value of -1 disables the evaluation of this threshold. The threshold can be specified as either an absolute value (n) or a percentage (n%). The value of winA3StatusProcCpuInterval will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigProcCpuCritMax 1.3.6.1.4.1.791.2.10.2.90.1.11.24
&Default critical maximum threshold, in seconds, for the cpu utilization monitoring of the process watcher to add. This value represents a rising threshold and must be equal to or greater than 0.0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in winA3StatusProcCpuInterval, but cannot be less than the warning maximum threshold. A value of -1 disables the evaluation of this threshold. The threshold can be specified as either an absolute value (n) or a percentage (n%). The value of winA3StatusProcCpuInterval will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigProcCpuMonitor 1.3.6.1.4.1.791.2.10.2.90.1.11.25
&Default monitor level for the cpu utilization monitoring of the process watcher to add. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning thresholds (both minimum and maximum) to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical thresholds (both minimum and maximum) to determine the status of the resource. If set to 4 (minimum-only), the agent evaluates only the minimum thresholds (both warning and critical) to determine the status of the resource. If set to 5 (maximum-only), the agent evaluates only the maximum thresholds (both warning and critical) to determine the status of the resource. If set to 6 (all), the agent evaluates all thresholds to determine the status of the resource.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), minimum-only(4), maximum-only(5), all(6)  

winA3ConfigProcMiscMode 1.3.6.1.4.1.791.2.10.2.90.1.11.26
&This attribute determines which value (threads, handles, children or runtime) should be calculated by this metric. The option runtime(4) is the time, in seconds, the process is running for (beginning with the process creation).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER threads(1), handles(2), children(3), runtime(4)  

winA3ConfigProcMiscMin 1.3.6.1.4.1.791.2.10.2.90.1.11.27
&Default minimum threshold for the miscellaneous data monitoring of the process watcher to add. This value represents a declining threshold and must be equal to or greater than 0.0, but cannot be greater than the maximum threshold. A value of -1 disables the evaluation of this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigProcMiscMax 1.3.6.1.4.1.791.2.10.2.90.1.11.28
&Default maximum threshold for the miscellaneous data monitoring of the process watcher to add. This value represents a rising threshold and must be equal to or greater than 0.0, but cannot be less than the minimum threshold. A value of -1 disables the evaluation of this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigProcMiscMonitor 1.3.6.1.4.1.791.2.10.2.90.1.11.29
&Default monitor level for the miscellaneous data monitoring of the process watcher to add. If set to 1 (do-not-monitor), the agent does not evaluate the actual state of the resource and sets the status to ok. If set to 2 (down-warning), the agent uses a warning severity if the resource is in bad condition. If set to 3 (down-critical), the agent uses a critical severity if the resource is in bad condition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

winA3ConfigProcRestartPolicy 1.3.6.1.4.1.791.2.10.2.90.1.11.30
&Default monitor policy for the restart monitoring of the process watcher to add. The status will be set to 'down' according to the following rules: In case none-should-stop-or-start(1), if any process in the scope of the watcher did stop or start since the last poll; in case none-should-stop(2), if any process did stop; in case none-should-start(3), if any process did start; in case some-should-continue(4), if all processes did stop; and in case none-should-continue(5), if at least one process did not stop.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none-should-stop-or-start(1), none-should-stop(2), none-should-start(3), some-should-continue(4), none-should-continue(5)  

winA3ConfigProcRestartMonitor 1.3.6.1.4.1.791.2.10.2.90.1.11.31
&Default monitor level for the restart monitoring of the process watcher to add. If set to 1 (do-not-monitor), the agent does not evaluate the actual state of the resource and sets the status to ok. If set to 2 (down-warning), the agent uses a warning severity if the resource is in bad condition. If set to 3 (down-critical), the agent uses a critical severity if the resource is in bad condition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

winA3ConfigProcButton 1.3.6.1.4.1.791.2.10.2.90.1.11.32
&This attribute is used to add or remove the process watcher specified by the current setting of the watcher name attribute(s) in this group. If set to 2 (add), the agent adds the specified watcher to the status table using the current values of the remaining attributes as defaults. If set to 3 (remove), the agent removes the specified watcher from the status table. This attribute cannot be set to 1 (none).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3)  

winA3ConfigSrvcPollInterval 1.3.6.1.4.1.791.2.10.2.90.1.12.1
&Time, in seconds, between collections of service information. Valid range: 30 seconds or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigSrvcPollMethod 1.3.6.1.4.1.791.2.10.2.90.1.12.2
&Specifies how and when the agent collects service information. If set to 1 (disabled), the agent does not retrieve the service information (neither by polling nor by get request) and sets all statuses to passive or ok. If set to 2 (poll-interval-only), the agent only retrieves the information by polling, but not by get request. If set to 3 (poll-interval-and-query), the agent retrieves the information both by polling and by get request. If set to 4 (query-only), the agent retrieves the information only when a get request is made.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

winA3ConfigSrvcAutoPollInterval 1.3.6.1.4.1.791.2.10.2.90.1.12.3
&Time, in minutes, between the processing of the service auto watchers. Valid range: -1 (suspended), 30 minutes or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigSrvcName 1.3.6.1.4.1.791.2.10.2.90.1.12.4
&Name of the service for which to add or remove a watcher. For uniqueness, the service name must be specified as defined in the Windows registry. This name is typically different to the display name of a service, visible in the service manager console. If used as a filter element for auto discovery, this name can be a regular expression (case-insensitive). In this case, it restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigSrvcDisplayName 1.3.6.1.4.1.791.2.10.2.90.1.12.5
&The display name of a service as visible in the service manager console. This attribute is only used as a filter element for auto discovery and can be a regular expression (case-insensitive). It restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigSrvcStartupType 1.3.6.1.4.1.791.2.10.2.90.1.12.6
&The current startup type (automatic, manual or disabled) of the service. This attribute is only used as a filter element for auto discovery. It restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(1), manual(2), disabled(3), any(4)  

winA3ConfigSrvcAccount 1.3.6.1.4.1.791.2.10.2.90.1.12.7
&The account, the system uses to start this service. This attribute is only used as a filter element for auto discovery and can be a regular expression (case-insensitive). It restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigSrvcExecutable 1.3.6.1.4.1.791.2.10.2.90.1.12.8
&The executable belonging to this service. This attribute is only used as a filter element for auto discovery and can be a regular expression (case-insensitive). It restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigSrvcClusterType 1.3.6.1.4.1.791.2.10.2.90.1.12.9
&Cluster type of the service to be searched for during an auto discovery run. This attribute is only used when adding an auto watcher. If set to 1 (not-clustered), the search is restricted to not-clustered resources only. If set to 2 (clustered-active), the search is restricted to clustered-active resources only. If set to 3 (clustered-passive), the search is restricted to clustered-passive resources only. If set to 4 (any), the cluster type does not affect the search.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-clustered(1), clustered-active(2), clustered-passive(3), any(4)  

winA3ConfigSrvcDescription 1.3.6.1.4.1.791.2.10.2.90.1.12.10
&Default description for the service watcher to add.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigSrvcAggLag 1.3.6.1.4.1.791.2.10.2.90.1.12.11
&Default aggregate lag setting for the service watcher to add. Specifies the consecutive number of times at which any status is not in the ok state, before the aggregate status changes. This value must be greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigSrvcConfigMonitor 1.3.6.1.4.1.791.2.10.2.90.1.12.12
&Default monitor level for the configuration change monitoring of the service watcher to add. If set to 1 (do-not-monitor), the agent does not evaluate the actual state of the resource and sets the status to ok. If set to 2 (down-warning), the agent uses a warning severity if the resource is in bad condition. If set to 3 (down-critical), the agent uses a critical severity if the resource is in bad condition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

winA3ConfigSrvcActivePolicy 1.3.6.1.4.1.791.2.10.2.90.1.12.13
&Default monitor policy for the activity monitoring of the service watcher to add.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER should-be-active(1), should-not-be-active(2)  

winA3ConfigSrvcActiveMonitor 1.3.6.1.4.1.791.2.10.2.90.1.12.14
&Default monitor level for the activity monitoring of the service watcher to add. If set to 1 (do-not-monitor), the agent does not evaluate the actual state of the resource and sets the status to ok. If set to 2 (down-warning), the agent uses a warning severity if the resource is in bad condition. If set to 3 (down-critical), the agent uses a critical severity if the resource is in bad condition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

winA3ConfigSrvcExistPolicy 1.3.6.1.4.1.791.2.10.2.90.1.12.15
&Default monitor policy for the existence monitoring of the service watcher to add. Specifies how the agent should evaluate the presence or absence of the monitored resource in order to determine whether the resource is in good condition. If set to 1 (should-exist), the resource is expected to be existent. If set to 2 (should-not-exist), the resource is expected to be nonexistent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

winA3ConfigSrvcExistMonitor 1.3.6.1.4.1.791.2.10.2.90.1.12.16
&Default monitor level for the existence monitoring of the service watcher to add. If set to 1 (do-not-monitor), the agent does not evaluate the actual state of the resource and sets the status to ok. If set to 2 (down-warning), the agent uses a warning severity if the resource is in bad condition. If set to 3 (down-critical), the agent uses a critical severity if the resource is in bad condition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

winA3ConfigSrvcAutoTableWatcherName 1.3.6.1.4.1.791.2.10.2.90.1.12.17
&Name of the service auto watcher to add or remove.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigSrvcAutoTableWatcherMatchType 1.3.6.1.4.1.791.2.10.2.90.1.12.18
&Default search algorithm for the service auto watcher to add. The filter is the logical AND of all attributes used to identify or otherwise narrow down resources. If set to 1 (positive), the agent searches for service resources that match the filter. If set to 2 (negative), the agent searches for service resources that do not match the filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER positive(1), negative(2)  

winA3ConfigSrvcAutoTableWatcherLimit 1.3.6.1.4.1.791.2.10.2.90.1.12.19
&Default minimum number of matches that causes a lock of the service auto watcher to add.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigSrvcButton 1.3.6.1.4.1.791.2.10.2.90.1.12.20
&This attribute is used to add or remove the service watcher specified by the current setting of the watcher name attribute(s) in this group. If set to 2 (add), the agent adds the specified watcher to the status table using the current values of the remaining attributes as defaults. If set to 3 (remove), the agent removes the specified watcher from the status table. If set to 4 (add-auto), the agent adds the specified watcher to the auto configuration table using the current values of the remaining attributes as defaults. If set to 5 (remove-auto), the agent removes the specified watcher from the auto configuration table. This attribute cannot be set to 1 (none).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3), add-auto(4), remove-auto(5)  

winA3ConfigSrvcAutoCount 1.3.6.1.4.1.791.2.10.2.90.1.12.21
&Number of auto watchers in the service auto configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

winA3ConfigSrvcAutoLocked 1.3.6.1.4.1.791.2.10.2.90.1.12.22
&Number of auto watchers in the service auto configuration table which are currently locked.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

winA3ConfigSrvcAutoTable 1.3.6.1.4.1.791.2.10.2.90.1.12.23
&Configuration table containing a list of service auto watchers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WinA3ConfigSrvcAutoEntry

winA3ConfigSrvcAutoEntry 1.3.6.1.4.1.791.2.10.2.90.1.12.23.1
&Entry in the service auto watcher configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WinA3ConfigSrvcAutoEntry  

winA3ConfigSrvcAutoWatcherName 1.3.6.1.4.1.791.2.10.2.90.1.12.23.1.1
&Name of the service auto watcher.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigSrvcAutoName 1.3.6.1.4.1.791.2.10.2.90.1.12.23.1.2
&Name of the service to be searched for during an auto discovery run. For uniqueness, the service name must be specified as defined in the Windows registry. This name is typically different to the display name of a service, visible in the service manager console. This name is used as a filter element for auto discovery and can be a regular expression (case-insensitive). It restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigSrvcAutoDisplayName 1.3.6.1.4.1.791.2.10.2.90.1.12.23.1.3
&The display name of a service as visible in the service manager console. This attribute is used as a filter element for auto discovery and can be a regular expression (case-insensitive). It restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigSrvcAutoStartupType 1.3.6.1.4.1.791.2.10.2.90.1.12.23.1.4
&The current startup type (automatic, manual or disabled) of the service. This attribute is used as a filter element for auto discovery. It restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(1), manual(2), disabled(3), any(4)  

winA3ConfigSrvcAutoAccount 1.3.6.1.4.1.791.2.10.2.90.1.12.23.1.5
&The account, the system uses to start this service. This attribute is used as a filter element for auto discovery and can be a regular expression (case-insensitive). It restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigSrvcAutoExecutable 1.3.6.1.4.1.791.2.10.2.90.1.12.23.1.6
&The executable belonging to this service. This attribute is used as a filter element for auto discovery and can be a regular expression (case-insensitive). It restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigSrvcAutoClusterType 1.3.6.1.4.1.791.2.10.2.90.1.12.23.1.7
&Cluster type of the service to be searched for during an auto discovery run. If set to 1 (not-clustered), the search is restricted to not-clustered resources only. If set to 2 (clustered-active), the search is restricted to clustered-active resources only. If set to 3 (clustered-passive), the search is restricted to clustered-passive resources only. If set to 4 (any), the cluster type does not affect the search.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-clustered(1), clustered-active(2), clustered-passive(3), any(4)  

winA3ConfigSrvcAutoDescription 1.3.6.1.4.1.791.2.10.2.90.1.12.23.1.8
&Current description for the service auto watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigSrvcAutoWatcherMatchType 1.3.6.1.4.1.791.2.10.2.90.1.12.23.1.9
&Current search algorithm for the service auto watcher. The filter is the logical AND of all attributes used to identify or otherwise narrow down resources. If set to 1 (positive), the agent searches for service resources that match the filter. If set to 2 (negative), the agent searches for service resources that do not match the filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER positive(1), negative(2)  

winA3ConfigSrvcAutoWatcherLimit 1.3.6.1.4.1.791.2.10.2.90.1.12.23.1.10
&Current minimum number of matches that causes the service auto watcher to be locked.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigSrvcAutoWatcherLastMatched 1.3.6.1.4.1.791.2.10.2.90.1.12.23.1.11
&Number of matches for the last service auto discovery run.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

winA3ConfigSrvcAutoAggLag 1.3.6.1.4.1.791.2.10.2.90.1.12.23.1.12
&Current lag setting for the service auto watcher. Specifies the consecutive number of times at which any status is not in the ok state, before the aggregate status changes. This value must be greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigSrvcAutoConfigMonitor 1.3.6.1.4.1.791.2.10.2.90.1.12.23.1.13
&Default monitor level for the configuration change monitoring of any service watcher created by the auto watcher. If set to 1 (do-not-monitor), the agent does not evaluate the actual state of the resource and sets the status to ok. If set to 2 (down-warning), the agent uses a warning severity if the resource is in bad condition. If set to 3 (down-critical), the agent uses a critical severity if the resource is in bad condition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

winA3ConfigSrvcAutoActivePolicy 1.3.6.1.4.1.791.2.10.2.90.1.12.23.1.14
&Default monitor policy for the activity monitoring of any service watcher created by the auto watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER should-be-active(1), should-not-be-active(2)  

winA3ConfigSrvcAutoActiveMonitor 1.3.6.1.4.1.791.2.10.2.90.1.12.23.1.15
&Default monitor level for the activity monitoring of any service watcher created by the auto watcher. If set to 1 (do-not-monitor), the agent does not evaluate the actual state of the resource and sets the status to ok. If set to 2 (down-warning), the agent uses a warning severity if the resource is in bad condition. If set to 3 (down-critical), the agent uses a critical severity if the resource is in bad condition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

winA3ConfigSrvcAutoExistPolicy 1.3.6.1.4.1.791.2.10.2.90.1.12.23.1.16
&Default monitor policy for the existence monitoring of any service watcher created by the auto watcher. Specifies how the agent should evaluate the presence or absence of the monitored resource in order to determine whether the resource is in good condition. If set to 1 (should-exist), the resource is expected to be existent. If set to 2 (should-not-exist), the resource is expected to be nonexistent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

winA3ConfigSrvcAutoExistMonitor 1.3.6.1.4.1.791.2.10.2.90.1.12.23.1.17
&Default monitor level for the existence monitoring of any service watcher created by the auto watcher. If set to 1 (do-not-monitor), the agent does not evaluate the actual state of the resource and sets the status to ok. If set to 2 (down-warning), the agent uses a warning severity if the resource is in bad condition. If set to 3 (down-critical), the agent uses a critical severity if the resource is in bad condition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

winA3ConfigSrvcAutoButton 1.3.6.1.4.1.791.2.10.2.90.1.12.23.1.18
&This attribute is used to enable/disable or remove the service auto watcher. If set to 1 (active), the agent re-enables the watcher previously locked either explicitly or implicitly by exceeding the maximum number of allowed matches. Each set request with this value will cause the agent to process the auto watcher. If set to 3 (locked), the agent disables the auto watcher. If set to 2 (remove), the agent removes the auto watcher from the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), remove(2), locked(3)  

winA3ConfigJobPollInterval 1.3.6.1.4.1.791.2.10.2.90.1.13.1
&Time, in seconds, between collections of job information. Valid range: 30 seconds or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigJobPollMethod 1.3.6.1.4.1.791.2.10.2.90.1.13.2
&Specifies how and when the agent collects job information. If set to 1 (disabled), the agent does not retrieve the job information (neither by polling nor by get request) and sets all statuses to passive or ok. If set to 2 (poll-interval-only), the agent only retrieves the information by polling, but not by get request. If set to 3 (poll-interval-and-query), the agent retrieves the information both by polling and by get request. If set to 4 (query-only), the agent retrieves the information only when a get request is made.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

winA3ConfigJobAutoPollInterval 1.3.6.1.4.1.791.2.10.2.90.1.13.3
&Time, in minutes, between the processing of the job auto watchers. Valid range: -1 (suspended), 30 minutes or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigJobName 1.3.6.1.4.1.791.2.10.2.90.1.13.4
&Name of the job for which to add or remove a watcher. A job is a set of processes that is handled as a process group. If used as a filter element for auto discovery, this name can be a regular expression (case-insensitive). In this case, it restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigJobDescription 1.3.6.1.4.1.791.2.10.2.90.1.13.5
&Default description for the job watcher to add.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigJobAggLag 1.3.6.1.4.1.791.2.10.2.90.1.13.6
&Default aggregate lag setting for the job watcher to add. Specifies the consecutive number of times at which any status is not in the ok state, before the aggregate status changes. This value must be greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigJobProcsMin 1.3.6.1.4.1.791.2.10.2.90.1.13.7
&Default minimum threshold for the process count monitoring of the job watcher to add. This value represents a declining threshold and must be equal to or greater than 0, but cannot be greater than the maximum threshold. A value of -1 disables the evaluation of this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigJobProcsMax 1.3.6.1.4.1.791.2.10.2.90.1.13.8
&Default maximum threshold for the process count monitoring of the job watcher to add. This value represents a rising threshold and must be equal to or greater than 0, but cannot be less than the minimum threshold. A value of -1 disables the evaluation of this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigJobProcsMonitor 1.3.6.1.4.1.791.2.10.2.90.1.13.9
&Default monitor level for the process count monitoring of the job watcher to add. If set to 1 (do-not-monitor), the agent does not evaluate the actual state of the resource and sets the status to ok. If set to 2 (down-warning), the agent uses a warning severity if the resource is in bad condition. If set to 3 (down-critical), the agent uses a critical severity if the resource is in bad condition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

winA3ConfigJobSizeWarn 1.3.6.1.4.1.791.2.10.2.90.1.13.10
&Default warning threshold, in kilobytes, for the size utilization monitoring of the job watcher to add. This value represents a rising threshold and must be greater than 0.0, but cannot be greater than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigJobSizeCrit 1.3.6.1.4.1.791.2.10.2.90.1.13.11
&Default critical threshold, in kilobytes, for the size utilization monitoring of the job watcher to add. This value represents a rising threshold and must be greater than 0.0, but cannot be less than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigJobSizeMonitor 1.3.6.1.4.1.791.2.10.2.90.1.13.12
&Default monitor level for the size utilization monitoring of the job watcher to add. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning threshold to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical threshold to determine the status of the resource. If set to 4 (both), the agent evaluates both the warning and critical thresholds to determine the status of the resource. The critical threshold comes into effect if the warning threshold is set to the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

winA3ConfigJobCpuInterval 1.3.6.1.4.1.791.2.10.2.90.1.13.13
&Time, in seconds, defining the total value to use as base for the calculation of the cpu value. This means, the cpu usage of a job, in seconds, refers to this interval. Valid range: Greater 0 or '-1'. If set to '-1', the cpu value is calculated as the cpu usage, in seconds, used up to now by all currently active processes of the job since the start of the agent or the creation of the watcher. If the cpu interval is set to a value greater than the current poll interval and this time is not elapsed for the first time, the CPU value is extrapolated. If the cpu interval is set to a value smaller than the current poll interval, the CPU value is calculated as the appropriate fraction of the value for the last poll interval. If the cpu interval is set to a value greater than the current poll interval and this time is already elapsed, the CPU value is calculated as the sliding sum, i.e. the sum of the value for the current poll interval and the value calculated at the last poll, weighted according to it's fraction of the cpu interval. If the interval is set to '-1', any overloading (%) used for the thresholds will be ignored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigJobCpuWarn 1.3.6.1.4.1.791.2.10.2.90.1.13.14
&Default warning threshold, in seconds, for the cpu utilization monitoring of the job watcher to add. The active warning threshold is derived from this value and represents a rising threshold. The derived value must be greater than 0.0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in winA3StatusJobCpuInterval, but cannot be greater than the active critical threshold. These constraints will be maintained by the agent during all configuration actions. The threshold can be specified as either an absolute value (n) or a percentage (n%). The value of winA3StatusJobCpuInterval will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigJobCpuCrit 1.3.6.1.4.1.791.2.10.2.90.1.13.15
&Default critical threshold, in seconds, for the cpu utilization monitoring of the job watcher to add. The active critical threshold is derived from this value and represents a rising threshold. The derived value must be greater than 0.0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in winA3StatusJobCpuInterval, but cannot be less than the active warning threshold. These constraints will be maintained by the agent during all configuration actions. The threshold can be specified as either an absolute value (n) or a percentage (n%). The value of winA3StatusJobCpuInterval will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigJobCpuMonitor 1.3.6.1.4.1.791.2.10.2.90.1.13.16
&Default monitor level for the cpu utilization monitoring of the job watcher to add. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning threshold to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical threshold to determine the status of the resource. If set to 4 (both), the agent evaluates both the warning and critical thresholds to determine the status of the resource. The critical threshold comes into effect if the warning threshold is set to the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

winA3ConfigJobLossAction 1.3.6.1.4.1.791.2.10.2.90.1.13.17
&Default loss action for the job watcher to add. Specifies the action to take if the monitored job is removed from the Windows System configuration. If set to 1 (remove), the agent automatically removes the watcher. If set to 2 (up), the agent sets all statuses to ok. If set to 3 (down-warning), the agent sets the loss and aggregate statuses to warning and all other statuses to ok. If set to 4 (down-critical), the agent sets the loss and aggregate statuses to critical and all other statuses to ok.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

winA3ConfigJobAutoTableWatcherName 1.3.6.1.4.1.791.2.10.2.90.1.13.18
&Name of the job auto watcher to add or remove.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigJobAutoTableWatcherMatchType 1.3.6.1.4.1.791.2.10.2.90.1.13.19
&Default search algorithm for the job auto watcher to add. The filter is the logical AND of all attributes used to identify or otherwise narrow down resources. If set to 1 (positive), the agent searches for job resources that match the filter. If set to 2 (negative), the agent searches for job resources that do not match the filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER positive(1), negative(2)  

winA3ConfigJobAutoTableWatcherLimit 1.3.6.1.4.1.791.2.10.2.90.1.13.20
&Default minimum number of matches that causes a lock of the job auto watcher to add.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigJobButton 1.3.6.1.4.1.791.2.10.2.90.1.13.21
&This attribute is used to add or remove the job watcher specified by the current setting of the watcher name attribute(s) in this group. If set to 2 (add), the agent adds the specified watcher to the status table using the current values of the remaining attributes as defaults. If set to 3 (remove), the agent removes the specified watcher from the status table. If set to 4 (add-auto), the agent adds the specified watcher to the auto configuration table using the current values of the remaining attributes as defaults. If set to 5 (remove-auto), the agent removes the specified watcher from the auto configuration table. This attribute cannot be set to 1 (none).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3), add-auto(4), remove-auto(5)  

winA3ConfigJobAutoCount 1.3.6.1.4.1.791.2.10.2.90.1.13.22
&Number of auto watchers in the job auto configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

winA3ConfigJobAutoLocked 1.3.6.1.4.1.791.2.10.2.90.1.13.23
&Number of auto watchers in the job auto configuration table which are currently locked.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

winA3ConfigJobAutoTable 1.3.6.1.4.1.791.2.10.2.90.1.13.24
&Configuration table containing a list of job auto watchers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WinA3ConfigJobAutoEntry

winA3ConfigJobAutoEntry 1.3.6.1.4.1.791.2.10.2.90.1.13.24.1
&Entry in the job auto watcher configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WinA3ConfigJobAutoEntry  

winA3ConfigJobAutoWatcherName 1.3.6.1.4.1.791.2.10.2.90.1.13.24.1.1
&Name of the job auto watcher.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigJobAutoName 1.3.6.1.4.1.791.2.10.2.90.1.13.24.1.2
&Name of the job to be searched for during an auto discovery run. A job is a set of processes that is handled as a process group. This name is used as a filter element for auto discovery and can be a regular expression (case-insensitive). It restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigJobAutoDescription 1.3.6.1.4.1.791.2.10.2.90.1.13.24.1.3
&Current description for the job auto watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigJobAutoWatcherMatchType 1.3.6.1.4.1.791.2.10.2.90.1.13.24.1.4
&Current search algorithm for the job auto watcher. The filter is the logical AND of all attributes used to identify or otherwise narrow down resources. If set to 1 (positive), the agent searches for job resources that match the filter. If set to 2 (negative), the agent searches for job resources that do not match the filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER positive(1), negative(2)  

winA3ConfigJobAutoWatcherLimit 1.3.6.1.4.1.791.2.10.2.90.1.13.24.1.5
&Current minimum number of matches that causes the job auto watcher to be locked.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigJobAutoWatcherLastMatched 1.3.6.1.4.1.791.2.10.2.90.1.13.24.1.6
&Number of matches for the last job auto discovery run.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

winA3ConfigJobAutoAggLag 1.3.6.1.4.1.791.2.10.2.90.1.13.24.1.7
&Current lag setting for the job auto watcher. Specifies the consecutive number of times at which any status is not in the ok state, before the aggregate status changes. This value must be greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigJobAutoProcsMin 1.3.6.1.4.1.791.2.10.2.90.1.13.24.1.8
&Default minimum threshold for the process count monitoring of any job watcher created by the auto watcher. This value represents a declining threshold and must be equal to or greater than 0, but cannot be greater than the maximum threshold. A value of -1 disables the evaluation of this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigJobAutoProcsMax 1.3.6.1.4.1.791.2.10.2.90.1.13.24.1.9
&Default maximum threshold for the process count monitoring of any job watcher created by the auto watcher. This value represents a rising threshold and must be equal to or greater than 0, but cannot be less than the minimum threshold. A value of -1 disables the evaluation of this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigJobAutoProcsMonitor 1.3.6.1.4.1.791.2.10.2.90.1.13.24.1.10
&Default monitor level for the process count monitoring of any job watcher created by the auto watcher. If set to 1 (do-not-monitor), the agent does not evaluate the actual state of the resource and sets the status to ok. If set to 2 (down-warning), the agent uses a warning severity if the resource is in bad condition. If set to 3 (down-critical), the agent uses a critical severity if the resource is in bad condition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

winA3ConfigJobAutoSizeWarn 1.3.6.1.4.1.791.2.10.2.90.1.13.24.1.11
&Default warning threshold, in kilobytes, for the size utilization monitoring of any job watcher created by the auto watcher. This value represents a rising threshold and must be greater than 0.0, but cannot be greater than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigJobAutoSizeCrit 1.3.6.1.4.1.791.2.10.2.90.1.13.24.1.12
&Default critical threshold, in kilobytes, for the size utilization monitoring of any job watcher created by the auto watcher. This value represents a rising threshold and must be greater than 0.0, but cannot be less than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigJobAutoSizeMonitor 1.3.6.1.4.1.791.2.10.2.90.1.13.24.1.13
&Default monitor level for the size utilization monitoring of any job watcher created by the auto watcher. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning threshold to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical threshold to determine the status of the resource. If set to 4 (both), the agent evaluates both the warning and critical thresholds to determine the status of the resource. The critical threshold comes into effect if the warning threshold is set to the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

winA3ConfigJobAutoCpuInterval 1.3.6.1.4.1.791.2.10.2.90.1.13.24.1.14
&Time, in seconds, defining the total value to use as base for the calculation of the cpu value. This means, the cpu usage of a job, in seconds, refers to this interval. Valid range: Greater 0 or '-1'. If set to '-1', the cpu value is calculated as the cpu usage, in seconds, used up to now by all currently active processes of the job since the start of the agent or the creation of the watcher. If the cpu interval is set to a value greater than the current poll interval and this time is not elapsed for the first time, the CPU value is extrapolated. If the cpu interval is set to a value smaller than the current poll interval, the CPU value is calculated as the appropriate fraction of the value for the last poll interval. If the cpu interval is set to a value greater than the current poll interval and this time is already elapsed, the CPU value is calculated as the sliding sum, i.e. the sum of the value for the current poll interval and the value calculated at the last poll, weighted according to it's fraction of the cpu interval. If the interval is set to '-1', any overloading (%) used for the thresholds will be ignored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigJobAutoCpuWarn 1.3.6.1.4.1.791.2.10.2.90.1.13.24.1.15
&Default warning threshold, in seconds, for the cpu utilization monitoring of any job watcher created by the auto watcher. The active warning threshold is derived from this value and represents a rising threshold. The derived value must be greater than 0.0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in winA3StatusJobCpuInterval, but cannot be greater than the active critical threshold. These constraints will be maintained by the agent during all configuration actions. The threshold can be specified as either an absolute value (n) or a percentage (n%). The value of winA3StatusJobCpuInterval will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigJobAutoCpuCrit 1.3.6.1.4.1.791.2.10.2.90.1.13.24.1.16
&Default critical threshold, in seconds, for the cpu utilization monitoring of any job watcher created by the auto watcher. The active critical threshold is derived from this value and represents a rising threshold. The derived value must be greater than 0.0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in winA3StatusJobCpuInterval, but cannot be less than the active warning threshold. These constraints will be maintained by the agent during all configuration actions. The threshold can be specified as either an absolute value (n) or a percentage (n%). The value of winA3StatusJobCpuInterval will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigJobAutoCpuMonitor 1.3.6.1.4.1.791.2.10.2.90.1.13.24.1.17
&Default monitor level for the cpu utilization monitoring of any job watcher created by the auto watcher. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning threshold to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical threshold to determine the status of the resource. If set to 4 (both), the agent evaluates both the warning and critical thresholds to determine the status of the resource. The critical threshold comes into effect if the warning threshold is set to the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

winA3ConfigJobAutoLossAction 1.3.6.1.4.1.791.2.10.2.90.1.13.24.1.18
&Default loss action for any job watcher created by the auto watcher. Specifies the action to take if the monitored job is removed from the Windows System configuration. If set to 1 (remove), the agent automatically removes the watcher. If set to 2 (up), the agent sets all statuses to ok. If set to 3 (down-warning), the agent sets the loss and aggregate statuses to warning and all other statuses to ok. If set to 4 (down-critical), the agent sets the loss and aggregate statuses to critical and all other statuses to ok.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

winA3ConfigJobAutoButton 1.3.6.1.4.1.791.2.10.2.90.1.13.24.1.19
&This attribute is used to enable/disable or remove the job auto watcher. If set to 1 (active), the agent re-enables the watcher previously locked either explicitly or implicitly by exceeding the maximum number of allowed matches. Each set request with this value will cause the agent to process the auto watcher. If set to 3 (locked), the agent disables the auto watcher. If set to 2 (remove), the agent removes the auto watcher from the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), remove(2), locked(3)  

winA3ConfigSessPollInterval 1.3.6.1.4.1.791.2.10.2.90.1.14.1
&Time, in seconds, between collections of terminal session information. Valid range: 30 seconds or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigSessPollMethod 1.3.6.1.4.1.791.2.10.2.90.1.14.2
&Specifies how and when the agent collects terminal session information. If set to 1 (disabled), the agent does not retrieve the terminal session information (neither by polling nor by get request) and sets all statuses to passive or ok. If set to 2 (poll-interval-only), the agent only retrieves the information by polling, but not by get request. If set to 3 (poll-interval-and-query), the agent retrieves the information both by polling and by get request. If set to 4 (query-only), the agent retrieves the information only when a get request is made.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

winA3ConfigSessWatcherName 1.3.6.1.4.1.791.2.10.2.90.1.14.3
&An arbitrary name for the watcher. Note that monitoring of sessions is not applicable on Windows XP and on Windows 2000 Professional.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigSessMatchType 1.3.6.1.4.1.791.2.10.2.90.1.14.4
&Default search algorithm for the terminal session watcher. The filter is the logical AND of all attributes used to identify or otherwise narrow down resources. If the value of one of these attributes includes 'wildcards', then the watcher will basically behave like a one-to-many watcher, i.e. it may monitor two or more resources simultaneously. If set to 1 (positive-regular-expression), the agent searches for terminal session resources that match the filter as a regular expression (case-insensitive). If set to 2 (negative-regular-expression), the agent searches for terminal session resources that do not match the filter as a regular expression (case-insensitive). If set to 3 (positive-string-compare), the agent searches for terminal session resources that match the filter as string comparison (case-insensitive). If set to 4 (negative-string-compare), the agent searches for terminal session resources that do not match the filter as string comparison (case-insensitive).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER positive-regular-expression(1), negative-regular-expression(2), positive-string-compare(3), negative-string-compare(4)  

winA3ConfigSessClient 1.3.6.1.4.1.791.2.10.2.90.1.14.5
&Client name of the session for which to add or remove a watcher. The client name is the name of the host, from where this session was initiated. This name is used as a filter element for one-to-many monitoring (one watcher monitors several resources simultaneously) and can be a regular expression (case-insensitive). The expression '.*' always matches any string, independent from the match type. Note that monitoring of sessions is not applicable on Windows XP and on Windows 2000 Professional.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigSessUser 1.3.6.1.4.1.791.2.10.2.90.1.14.6
&User name of the session for which to add or remove a watcher. The user name specifies the user, who logged in and is in the form 'domainName\userName'. This name is used as a filter element for one-to-many monitoring (one watcher monitors several resources simultaneously) and can be a regular expression (case-insensitive). The expression '.*' always matches any string, independent from the match type. Note that monitoring of sessions is not applicable on Windows XP and on Windows 2000 Professional.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigSessEvalPolicy 1.3.6.1.4.1.791.2.10.2.90.1.14.7
&Default evaluation policy for the terminal session watcher. Defines how metric values will be calculated and 'culprits' be determined if two or more terminal session resources fall into the monitoring scope of a one-to-many watcher. If set to 1 (individual), metric values will be set to the worst values (lowest and/or highest) of all terminal session instances; if the value of a metric violates the threshold condition, the respective 'culprits' list will contain all instances individually violating the most severe threshold. If set to 2 (min), metric values will be set to the lowest (minimum) values of all terminal session instances; if the value of a metric violates the threshold condition, the respective 'culprits' list will contain all instances having the same minimum value. If set to 3 (max), metric values will be set to the highest (maximum) values of all terminal session instances; if the value of a metric violates the threshold condition, the respective 'culprits' list will contain all instances having the same maximum value. If set to 4 (sum), metric values will be set to the cumulative values (sum) of all terminal session instances; if the value of a metric violates the threshold condition, the respective 'culprits' list will contain all instances. If set to 5 (avg), metric values will be set to the average values of all terminal session instances; if the value of a metric violates the threshold condition, the respective 'culprits' list will contain all instances individually violating the most severe threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER individual(1), min(2), max(3), sum(4), avg(5)  

winA3ConfigSessDescription 1.3.6.1.4.1.791.2.10.2.90.1.14.8
&Default description for the terminal session watcher to add.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigSessAggLag 1.3.6.1.4.1.791.2.10.2.90.1.14.9
&Default aggregate lag setting for the terminal session watcher to add. Specifies the consecutive number of times at which any status is not in the ok state, before the aggregate status changes. This value must be greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigSessInstMin 1.3.6.1.4.1.791.2.10.2.90.1.14.10
&Default minimum threshold for the instance count monitoring of the terminal session watcher to add. This value represents a declining threshold and must be equal to or greater than 0, but cannot be greater than the maximum threshold. A value of -1 disables the evaluation of this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigSessInstMax 1.3.6.1.4.1.791.2.10.2.90.1.14.11
&Default maximum threshold for the instance count monitoring of the terminal session watcher to add. This value represents a rising threshold and must be equal to or greater than 0, but cannot be less than the minimum threshold. A value of -1 disables the evaluation of this threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigSessInstMonitor 1.3.6.1.4.1.791.2.10.2.90.1.14.12
&Default monitor level for the instance count monitoring of the terminal session watcher to add. If set to 1 (do-not-monitor), the agent does not evaluate the actual state of the resource and sets the status to ok. If set to 2 (down-warning), the agent uses a warning severity if the resource is in bad condition. If set to 3 (down-critical), the agent uses a critical severity if the resource is in bad condition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

winA3ConfigSessSizeWarn 1.3.6.1.4.1.791.2.10.2.90.1.14.13
&Default warning threshold, in kilobytes, for the size utilization monitoring of the terminal session watcher to add. This value represents a rising threshold and must be greater than 0.0, but cannot be greater than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigSessSizeCrit 1.3.6.1.4.1.791.2.10.2.90.1.14.14
&Default critical threshold, in kilobytes, for the size utilization monitoring of the terminal session watcher to add. This value represents a rising threshold and must be greater than 0.0, but cannot be less than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigSessSizeMonitor 1.3.6.1.4.1.791.2.10.2.90.1.14.15
&Default monitor level for the size utilization monitoring of the terminal session watcher to add. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning threshold to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical threshold to determine the status of the resource. If set to 4 (both), the agent evaluates both the warning and critical thresholds to determine the status of the resource. The critical threshold comes into effect if the warning threshold is set to the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

winA3ConfigSessCpuInterval 1.3.6.1.4.1.791.2.10.2.90.1.14.16
&Time, in seconds, defining the total value to use as base for the calculation of the cpu value. This means, the cpu usage of a session, in seconds, refers to this interval. Valid range: Greater 0 or '-1'. If set to '-1', the cpu value is calculated as the cpu usage, in seconds, used up to now by all currently active processes of the session since the start of the agent or the creation of the watcher. If the cpu interval is set to a value greater than the current poll interval and this time is not elapsed for the first time, the CPU value is extrapolated. If the cpu interval is set to a value smaller than the current poll interval, the CPU value is calculated as the appropriate fraction of the value for the last poll interval. If the cpu interval is set to a value greater than the current poll interval and this time is already elapsed, the CPU value is calculated as the sliding sum, i.e. the sum of the value for the current poll interval and the value calculated at the last poll, weighted according to it's fraction of the cpu interval. If the interval is set to '-1', any overloading (%) used for the thresholds will be ignored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigSessCpuWarn 1.3.6.1.4.1.791.2.10.2.90.1.14.17
&Default warning threshold, in seconds, for the cpu utilization monitoring of the terminal session watcher to add. The active warning threshold is derived from this value and represents a rising threshold. The derived value must be greater than 0.0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in winA3StatusSessCpuInterval, but cannot be greater than the active critical threshold. These constraints will be maintained by the agent during all configuration actions. The threshold can be specified as either an absolute value (n) or a percentage (n%). The value of winA3StatusSessCpuInterval will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigSessCpuCrit 1.3.6.1.4.1.791.2.10.2.90.1.14.18
&Default critical threshold, in seconds, for the cpu utilization monitoring of the terminal session watcher to add. The active critical threshold is derived from this value and represents a rising threshold. The derived value must be greater than 0.0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in winA3StatusSessCpuInterval, but cannot be less than the active warning threshold. These constraints will be maintained by the agent during all configuration actions. The threshold can be specified as either an absolute value (n) or a percentage (n%). The value of winA3StatusSessCpuInterval will be the reference value for n% notations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigSessCpuMonitor 1.3.6.1.4.1.791.2.10.2.90.1.14.19
&Default monitor level for the cpu utilization monitoring of the terminal session watcher to add. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning threshold to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical threshold to determine the status of the resource. If set to 4 (both), the agent evaluates both the warning and critical thresholds to determine the status of the resource. The critical threshold comes into effect if the warning threshold is set to the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

winA3ConfigSessButton 1.3.6.1.4.1.791.2.10.2.90.1.14.20
&This attribute is used to add or remove the terminal session watcher specified by the current setting of the watcher name attribute(s) in this group. If set to 2 (add), the agent adds the specified watcher to the status table using the current values of the remaining attributes as defaults. If set to 3 (remove), the agent removes the specified watcher from the status table. This attribute cannot be set to 1 (none).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3)  

winA3ConfigPrnPollInterval 1.3.6.1.4.1.791.2.10.2.90.1.15.1
&Time, in seconds, between collections of printer information. Valid range: 30 seconds or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigPrnPollMethod 1.3.6.1.4.1.791.2.10.2.90.1.15.2
&Specifies how and when the agent collects printer information. If set to 1 (disabled), the agent does not retrieve the printer information (neither by polling nor by get request) and sets all statuses to passive or ok. If set to 2 (poll-interval-only), the agent only retrieves the information by polling, but not by get request. If set to 3 (poll-interval-and-query), the agent retrieves the information both by polling and by get request. If set to 4 (query-only), the agent retrieves the information only when a get request is made.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

winA3ConfigPrnAutoPollInterval 1.3.6.1.4.1.791.2.10.2.90.1.15.3
&Time, in minutes, between the processing of the printer auto watchers. Valid range: -1 (suspended), 30 minutes or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigPrnName 1.3.6.1.4.1.791.2.10.2.90.1.15.4
&Name of the printer for which to add or remove a watcher. If used as a filter element for auto discovery, this name can be a regular expression (case-insensitive). In this case, it restricts the resources to be searched for during an auto discovery run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigPrnDescription 1.3.6.1.4.1.791.2.10.2.90.1.15.5
&Default description for the printer watcher to add.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigPrnAggLag 1.3.6.1.4.1.791.2.10.2.90.1.15.6
&Default aggregate lag setting for the printer watcher to add. Specifies the consecutive number of times at which any status is not in the ok state, before the aggregate status changes. This value must be greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigPrnEventMonitor 1.3.6.1.4.1.791.2.10.2.90.1.15.7
&Default monitor level for the event monitoring of the printer watcher to add. If set to 1 (do-not-monitor), the agent does not evaluate the actual state of the resource and sets the status to ok. If set to 2 (down-warning), the agent uses a warning severity if the resource is in bad condition. If set to 3 (down-critical), the agent uses a critical severity if the resource is in bad condition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

winA3ConfigPrnQueueWarn 1.3.6.1.4.1.791.2.10.2.90.1.15.8
&Default warning threshold for the queue size monitoring of the printer watcher to add. This value represents a rising threshold and must be greater than 0, but cannot be greater than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigPrnQueueCrit 1.3.6.1.4.1.791.2.10.2.90.1.15.9
&Default critical threshold for the queue size monitoring of the printer watcher to add. This value represents a rising threshold and must be greater than 0, but cannot be less than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigPrnQueueMonitor 1.3.6.1.4.1.791.2.10.2.90.1.15.10
&Default monitor level for the queue size monitoring of the printer watcher to add. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning threshold to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical threshold to determine the status of the resource. If set to 4 (both), the agent evaluates both the warning and critical thresholds to determine the status of the resource. The critical threshold comes into effect if the warning threshold is set to the same value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

winA3ConfigPrnLossAction 1.3.6.1.4.1.791.2.10.2.90.1.15.11
&Default loss action for the printer watcher to add. Specifies the action to take if the monitored printer is removed from the Windows System configuration. If set to 1 (remove), the agent automatically removes the watcher. If set to 2 (up), the agent sets all statuses to ok. If set to 3 (down-warning), the agent sets the loss and aggregate statuses to warning and all other statuses to ok. If set to 4 (down-critical), the agent sets the loss and aggregate statuses to critical and all other statuses to ok.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

winA3ConfigPrnAutoTableWatcherName 1.3.6.1.4.1.791.2.10.2.90.1.15.12
&Name of the printer auto watcher to add or remove.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

winA3ConfigPrnAutoTableWatcherMatchType 1.3.6.1.4.1.791.2.10.2.90.1.15.13
&Default search algorithm for the printer auto watcher to add. The filter is the logical AND of all attributes used to identify or otherwise narrow down resources. If set to 1 (positive), the agent searches for printer resources that match the filter. If set to 2 (negative), the agent searches for printer resources that do not match the filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER positive(1), negative(2)  

winA3ConfigPrnAutoTableWatcherLimit 1.3.6.1.4.1.791.2.10.2.90.1.15.14
&Default minimum number of matches that causes a lock of the printer auto watcher to add.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

winA3ConfigPrnButton 1.3.6.1.4.1.791.2.10.2.90.1.15.15
&This attribute is used to add or remove the printer watcher specified by the current setting of the watcher name attribute(s) in this group. If set to 2 (add), the agent adds the specified watcher to the status table using the current values of the remaining attributes as defaults. If set to 3 (remove), the agent removes the specified watcher from the status table. If set to 4 (add-auto), the agent adds the specified watcher to the auto configuration table using the current values of the remaining attributes as defaults. If set to 5 (remove-auto), the agent removes the specified watcher from the auto configuration table. This attribute cannot be set to 1 (none).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3), add-auto(4), remove-auto(5)  

winA3ConfigPrnAutoCount 1.3.6.1.4.1.791.2.10.2.90.1.15.16
&Number of auto watchers in the printer auto configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

winA3ConfigPrnAutoLocked 1.3.6.1.4.1.791.2.10.2.90.1.15.17
&Number of auto watchers in the printer auto configuration table which are currently locked.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

winA3ConfigPrnAutoTable 1.3.6.1.4.1.791.2.10.2.90.1.15.18
&Configuration table containing a list of printer auto watchers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WinA3ConfigPrnAutoEntry

winA3ConfigPrnAutoEntry 1.3.6.1.4.1.791.2.10.2.90.1.15.18.1
&Entry in the printer auto watcher configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WinA3ConfigPrnAutoEntry  

winA3ConfigPrnAutoWatcherName 1.3.6.1.4.1.791.2.10.2.90.1.15.18.1.1
&Name of the printer auto watcher.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

winA3ConfigPrnAutoName