A3COM-HUAWEI-MPLSOAM-MIB
File:
A3COM-HUAWEI-MPLSOAM-MIB.mib (16597 bytes)
Imported modules
Imported symbols
Defined Types
H3cMplsOAMDefectType |
|
An indication of the OAM's defect type:
1: dServer, server layer defect;
2: dPeerMe, peer network maintenance entity defect;
3: dLOCV, Loss of Connectivity Verification defect;
4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect;
5: dTTSIMismerge, Trail Termination Source Identifier Mismerge defect;
6: dExcess, receiving excess rate of CV/FFD;
7: dUnknown, unknown defect in the MPLS network..
8: rlsn down;
9: dLspDown;
10: MPLS OAM ME;
11: no defect. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
dServer(1), dPeerMe(2), dLOCV(3), dTTSIMismatch(4), dTTSIMismerge(5), dExcess(6), dUnknown(7), dRlsnDown(8), dLspDown(9), dME(10), noDefect(11) |
|
H3cMplsOAMDetectFreq |
|
An indication of the OAM's frequent type( ITU-T: Y.1711(0402) ):
For CV: the frequency is static. The value is 1/s.
For FFD: the frequency is set by user. The value
can be 10ms, 20ms, 50ms, 100ms, 200ms, 500ms.
Any other frequency is wrong.
1: 10ms;
2: 20ms;
3: 50ms;
4: 100ms;
5: 200ms;
6: 500ms;
7: 1000ms(only for cv). |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
ffd10ms(1), ffd20ms(2), ffd50ms(3), ffd100ms(4), ffd200ms(5), ffd500ms(6), cv1000ms(7) |
|
H3cMplsOamIgrEntry |
|
SEQUENCE |
|
|
|
|
h3cMplsOamIgrIndex |
Unsigned32 |
|
|
h3cMplsOamIgrLspName |
OCTET STRING |
|
|
h3cMplsOamIgrDetectType |
INTEGER |
|
|
h3cMplsOamIgrDetectFreq |
H3cMplsOAMDetectFreq |
|
|
h3cMplsOamIgrRevType |
INTEGER |
|
|
h3cMplsOamIgrRevLspName |
OCTET STRING |
|
|
h3cMplsOamIgrLspId |
Integer32 |
|
|
h3cMplsOamIgrEnable |
TruthValue |
|
|
h3cMplsOamIgrDefectType |
H3cMplsOAMDefectType |
|
|
h3cMplsOamIgrRowStatus |
RowStatus |
|
H3cMplsOamEgrEntry |
|
SEQUENCE |
|
|
|
|
h3cMplsOamEgrIndex |
Unsigned32 |
|
|
h3cMplsOamEgrLspName |
OCTET STRING |
|
|
h3cMplsOamEgrDetectType |
INTEGER |
|
|
h3cMplsOamEgrDetectFreq |
H3cMplsOAMDetectFreq |
|
|
h3cMplsOamEgrRevType |
INTEGER |
|
|
h3cMplsOamEgrRevLspName |
OCTET STRING |
|
|
h3cMplsOamEgrLsrId |
IpAddress |
|
|
h3cMplsOamEgrLspId |
Integer32 |
|
|
h3cMplsOamEgrEnable |
TruthValue |
|
|
h3cMplsOamEgrDefectType |
H3cMplsOAMDefectType |
|
|
h3cMplsOamEgrRowStatus |
RowStatus |
|
Defined Values
h3cMplsOam |
1.1.43.45.1.10.2.79 |
This MIB contains objects to configure OAM module.
The Operation, Administration and Maintenance (OAM)
is an effective means for decreasing the cost of network maintenance.
The MPLS OAM is used to administrate and maintain MPLS. |
MODULE-IDENTITY |
|
|
|
h3cMplsOamCapability |
1.1.43.45.1.10.2.79.1.1 |
Whether OAM is globally capable.
false: incapable;
true: capable;
The default value is incapable. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
h3cMplsOamTrapOpen |
1.1.43.45.1.10.2.79.1.2 |
Whether OAM trap is globally enabled.
false: disable;
true: enable;
The default value is disable. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
h3cMplsOamIgrTable |
1.1.43.45.1.10.2.79.2.1 |
This table specifies per-LSP MPLS OAM ingress capability and
associated information, such as IgrLspName and IgrDetType. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
H3cMplsOamIgrEntry |
|
h3cMplsOamIgrEntry |
1.1.43.45.1.10.2.79.2.1.1 |
An entry in this table is created by an LSR for every LSP
capable of supporting MPLS OAM at ingress. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cMplsOamIgrEntry |
|
|
h3cMplsOamIgrIndex |
1.1.43.45.1.10.2.79.2.1.1.1 |
This is an unique index for an OAM ingress entry in the OAM table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
h3cMplsOamIgrLspName |
1.1.43.45.1.10.2.79.2.1.1.2 |
The name of an LSP.
It means the LSP name of the detected LSP. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
h3cMplsOamIgrDetectType |
1.1.43.45.1.10.2.79.2.1.1.3 |
There are two types of OAM packets, CV and FFD.
The CV flow is generated at the source LSR of the LSP with
a nominal frequency of 1/s and terminated at the sink LSR of the LSP.
FFD provides failure detection option for an LSP independent
of the CV based availability model and is not tied to the
CV insertion rate. Insertion rates at 1/s or faster may
also be used.
The CV/FFD packet contains a network-unique identifier (TTSI)
so that all types of defects can be detected.
1: CV;
2: FFD. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
cv(1), ffd(2) |
|
h3cMplsOamIgrRevType |
1.1.43.45.1.10.2.79.2.1.1.5 |
When an LSP is found to be in defect, the sink LSR of the LSP
should send BDI to inform the source LSR of the LSP, the BDI is
transferred through the reverse LSP.
The type of reverse LSP can be private or shared.
If private, then the reverse LSP can be used only by the oam ingress;
If shared, the reverse LSP which is shared between many forward
LSPs, whose source LSRs are the same and sink LSRs are the same.
1: private;
2: share. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
private(1), share(2) |
|
h3cMplsOamIgrRevLspName |
1.1.43.45.1.10.2.79.2.1.1.6 |
The object indicates the name of the reverse LSP. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
h3cMplsOamIgrLspId |
1.1.43.45.1.10.2.79.2.1.1.7 |
For ingress, the object indicates the lsp ID of
the detected LSP. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cMplsOamIgrEnable |
1.1.43.45.1.10.2.79.2.1.1.8 |
Whether one LSP is OAM enable.
If disable, LSP is not monitored;
If enable, CV/FFD is generated at the source LSR of the LSP and
checked at the sink LSR of the LSP, and user can set
other configuration.
false: The OAM function is disabled on the ingress;
true: The OAM function is enabled on the ingress. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
h3cMplsOamIgrRowStatus |
1.1.43.45.1.10.2.79.2.1.1.10 |
This object is responsible for managing the creation,
deletion and modification of rows, which support active
status and CreatAndGo, destroy operation.
To create a new row, h3cMplsOamIgrLspName, h3cMplsOamIgrDetectType,
h3cMplsOamIgrDetectFreq, h3cMplsOamIgrRevType, h3cMplsOamIgrRevLspName,
and h3cMplsOamIgrLspId must be specified. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
h3cMplsOamEgrTable |
1.1.43.45.1.10.2.79.2.2 |
This table specifies per-LSP MPLS OAM capability and
associated information, such as DetectType, DetectFrequency. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
H3cMplsOamEgrEntry |
|
h3cMplsOamEgrEntry |
1.1.43.45.1.10.2.79.2.2.1 |
An entry in this table is created by an LSR for every LSP
capable of supporting MPLS OAM at egress. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cMplsOamEgrEntry |
|
|
h3cMplsOamEgrIndex |
1.1.43.45.1.10.2.79.2.2.1.1 |
This is a unique index for an OAM egress entry in the OAM table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
h3cMplsOamEgrLspName |
1.1.43.45.1.10.2.79.2.2.1.2 |
The object indicates the name of static LSP at egress. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
h3cMplsOamEgrDetectType |
1.1.43.45.1.10.2.79.2.2.1.3 |
There are two types of OAM packets, CV and FFD.
The CV flow is generated at the source LSR of the LSP with
a nominal frequency of 1/s and terminated at the sink LSR of the LSP.
FFD provides failure detection option for an LSP independent
of the CV based availability model and is not tied to the
CV insertion rate. Insertion rates at 1/s or faster may
also be used.
The CV/FFD packet contains a network-unique identifier (TTSI)
so that all types of defects can be detected.
1: CV;
2: FFD. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
cv(1), ffd(2) |
|
h3cMplsOamEgrRevType |
1.1.43.45.1.10.2.79.2.2.1.5 |
When an LSP is found to be in defect, the sink LSR of the LSP
should send BDI to inform the source LSR of the LSP, the BDI is
transferred through the reverse LSP.
The type of reverse LSP can be private or shared.
If private, then the reverse LSP can be used only when the only
LSP in defect;
If shared, the reverse LSP, which is shared between many forward
LSPs that have the same source LSRs and sink LSRs.
1: private;
2: share. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
private(1), share(2) |
|
h3cMplsOamEgrRevLspName |
1.1.43.45.1.10.2.79.2.2.1.6 |
The object indicates the name of a reverse static-lsp. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
h3cMplsOamEgrLsrId |
1.1.43.45.1.10.2.79.2.2.1.7 |
The object indicates the Ingress LSR ID of the LSP. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
h3cMplsOamEgrLspId |
1.1.43.45.1.10.2.79.2.2.1.8 |
The object indicates the the Ingress session lsp ID of the
detected static-LSP. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cMplsOamEgrEnable |
1.1.43.45.1.10.2.79.2.2.1.9 |
Whether one LSP is enabled with OAM.
If disable, LSP is not monitored;
If enable, CV/FFD is generated at the source LSR of the LSP and
checked at the sink LSR of the LSP, and user can set
other configuration.
false: The OAM function is disabled on the egress;
true: The OAM function is enabled on the egress. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
h3cMplsOamEgrRowStatus |
1.1.43.45.1.10.2.79.2.2.1.11 |
This object is responsible for managing the creation,
deletion and modification of rows, which support active
status and CreatAndGo, destroy operation.
To create a new row, h3cMplsOamEgrLspName, h3cMplsOamEgrDetectType,
h3cMplsOamEgrDetectFreq, h3cMplsOamEgrRevType, h3cMplsOamEgrRevLspName,
h3cMplsOamEgrLsrId and h3cMplsOamEgrLspId must be specified. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
h3cMplsOamIgrLSPOutDefect |
1.1.43.45.1.10.2.79.3.1 |
This notification is generated when the LSP is found
out of the defect state at the LSP ingress. |
Status: current |
Access: read-create |
NOTIFICATION-TYPE |
|
|
|
h3cMplsOamIgrLSPInDefect |
1.1.43.45.1.10.2.79.3.2 |
This notification is generated when the LSP is found
in the defect state at the LSP ingress. |
Status: current |
Access: read-create |
NOTIFICATION-TYPE |
|
|
|
h3cMplsOamEgrLSPOutDefect |
1.1.43.45.1.10.2.79.3.3 |
This notification is generated when the LSP is found
out of the defect state at the LSP egress. |
Status: current |
Access: read-create |
NOTIFICATION-TYPE |
|
|
|
h3cMplsOamEgrLSPInDefect |
1.1.43.45.1.10.2.79.3.4 |
This notification is generated when the LSP is found
in the defect state at the LSP egress. |
Status: current |
Access: read-create |
NOTIFICATION-TYPE |
|
|
|