ALCATEL-IND1-NTP-MIB

File: ALCATEL-IND1-NTP-MIB.mib (79224 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	SNMPv2-CONF
INET-ADDRESS-MIB	ALCATEL-IND1-BASE

Imported symbols

OBJECT-IDENTITY	MODULE-IDENTITY	OBJECT-TYPE
NOTIFICATION-TYPE	IpAddress	Counter32
Unsigned32	Integer32	DisplayString
RowStatus	MODULE-COMPLIANCE	OBJECT-GROUP
NOTIFICATION-GROUP	InetAddress	InetAddressType
softentIND1Ntp

Defined Types

NtpPeerEntry
SEQUENCE
	alaNtpPeerAddressType	InetAddressType
	alaNtpPeerAddress	InetAddress
	alaNtpPeerIpAddress	IpAddress
	alaNtpPeerType	INTEGER
	alaNtpPeerAuth	INTEGER
	alaNtpPeerVersion	INTEGER
	alaNtpPeerMinpoll	INTEGER
	alaNtpPeerPrefer	INTEGER
	alaNtpPeerAdmin	RowStatus
	alaNtpPeerName	DisplayString
	alaNtpPeerStratum	INTEGER

NtpPeerListEntry
SEQUENCE
	alaNtpPeerListAddressType	InetAddressType
	alaNtpPeerListAddress	InetAddress
	alaNtpPeerListIpAddress	IpAddress
	alaNtpPeerListLocal	IpAddress
	alaNtpPeerListStratum	INTEGER
	alaNtpPeerListPoll	INTEGER
	alaNtpPeerListReach	INTEGER
	alaNtpPeerListDelay	DisplayString
	alaNtpPeerListOffset	DisplayString
	alaNtpPeerListDispersion	DisplayString
	alaNtpPeerListSynced	INTEGER
	alaNtpPeerListName	DisplayString

NtpPeerShowEntry
SEQUENCE
	alaNtpPeerShowRemoteAddressType	InetAddressType
	alaNtpPeerShowRemoteAddress	InetAddress
	alaNtpPeerShowRemoteIpAddress	IpAddress
	alaNtpPeerShowLocal	IpAddress
	alaNtpPeerShowHmode	DisplayString
	alaNtpPeerShowPmode	DisplayString
	alaNtpPeerShowStratum	INTEGER
	alaNtpPeerShowPrecision	INTEGER
	alaNtpPeerShowLeapIndicator	INTEGER
	alaNtpPeerShowReferenceId	DisplayString
	alaNtpPeerShowRootDistance	DisplayString
	alaNtpPeerShowRootDispersion	DisplayString
	alaNtpPeerShowPpoll	INTEGER
	alaNtpPeerShowHpoll	INTEGER
	alaNtpPeerShowKeyid	INTEGER
	alaNtpPeerShowVersion	INTEGER
	alaNtpPeerShowAssociation	INTEGER
	alaNtpPeerShowValid	INTEGER
	alaNtpPeerShowReach	INTEGER
	alaNtpPeerShowUnreach	INTEGER
	alaNtpPeerShowFlash	INTEGER
	alaNtpPeerShowBroadcastOffset	DisplayString
	alaNtpPeerShowTTL	INTEGER
	alaNtpPeerShowTimer	INTEGER
	alaNtpPeerShowFlags	INTEGER
	alaNtpPeerShowReferenceTime	DisplayString
	alaNtpPeerShowOriginateTime	DisplayString
	alaNtpPeerShowReceiveTime	DisplayString
	alaNtpPeerShowTransmitTime	DisplayString
	alaNtpPeerShowOffset	DisplayString
	alaNtpPeerShowDelay	DisplayString
	alaNtpPeerShowDispersion	DisplayString
	alaNtpPeerShowName	DisplayString
	alaNtpPeerShowStatus	BITS

NtpStatsPeerEntry
SEQUENCE
	alaNtpStatsPeerAddressType	InetAddressType
	alaNtpStatsPeerAddress	InetAddress
	alaNtpStatsPeerIpAddress	IpAddress
	alaNtpStatsPeerLocal	IpAddress
	alaNtpStatsPeerLastRcv	Counter32
	alaNtpStatsPeerNextSend	Counter32
	alaNtpStatsPeerReachChange	Counter32
	alaNtpStatsPeerPacketsSent	Counter32
	alaNtpStatsPeerPacketsRcvd	Counter32
	alaNtpStatsPeerBadAuth	Counter32
	alaNtpStatsPeerBogusOrigin	Counter32
	alaNtpStatsPeerDuplicate	Counter32
	alaNtpStatsPeerBadDispersion	Counter32
	alaNtpStatsPeerBadRefTime	Counter32
	alaNtpStatsPeerCandidateOrder	Counter32
	alaNtpStatsPeerReset	INTEGER
	alaNtpStatsPeerName	DisplayString

NtpStatsMonitorEntry
SEQUENCE
	alaNtpStatsMonitorIndex	Unsigned32
	alaNtpStatsMonitorAddress	IpAddress
	alaNtpStatsMonitorPort	INTEGER
	alaNtpStatsMonitorLocalAddress	IpAddress
	alaNtpStatsMonitorCount	Counter32
	alaNtpStatsMonitorMode	DisplayString
	alaNtpStatsMonitorVersion	INTEGER
	alaNtpStatsMonitorDrop	Counter32
	alaNtpStatsMonitorLast	Counter32
	alaNtpStatsMonitorFirst	Counter32
	alaNtpStatsMonitorName	DisplayString

NtpAccessKeyIdEntry
SEQUENCE
	alaNtpAccessKeyIdKeyId	INTEGER
	alaNtpAccessKeyIdTrust	INTEGER

NtpAccessRestrictedEntry
SEQUENCE
	alaNtpAccessRestrictedIpAddress	IpAddress
	alaNtpAccessRestrictedMask	IpAddress
	alaNtpAccessRestrictedRestrictions	INTEGER
	alaNtpAccessRestrictedCount	Counter32
	alaNtpAccessRestrictedRowStatus	RowStatus

NtpClientListEntry
SEQUENCE
	alaNtpClientListAddressType	InetAddressType
	alaNtpClientListAddress	InetAddress
	alaNtpClientListVersion	Integer32
	alaNtpClientKey	Integer32

Defined Values

alcatelIND1NTPMIB		1.3.6.1.4.1.6486.801.1.2.1.26.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Propietary NTP MIB definitions The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
MODULE-IDENTITY

alcatelIND1NTPMIBObjects		1.3.6.1.4.1.6486.801.1.2.1.26.1.1
Branch For NTP Subsystem Managed Objects.
Status: current	Access: read-only
OBJECT-IDENTITY

alaNtpConfig		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1
OBJECT IDENTIFIER

alaNtpInfo		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2
OBJECT IDENTIFIER

alaNtpStats		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3
OBJECT IDENTIFIER

alaNtpStatsStat		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4
OBJECT IDENTIFIER

alaNtpStatsLoop		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.5
OBJECT IDENTIFIER

alaNtpStatsIo		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6
OBJECT IDENTIFIER

alaNtpAccess		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7
OBJECT IDENTIFIER

alaNtpLocalInfo		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8
OBJECT IDENTIFIER

alaIND1NtpMIBConformance		1.3.6.1.4.1.6486.801.1.2.1.26.1.2
Branch For Ntp Subsystem Managed Objects.
Status: current	Access: read-only
OBJECT-IDENTITY

alaIND1NtpMIBGroups		1.3.6.1.4.1.6486.801.1.2.1.26.1.2.1
Branch For Ntp Subsystem Managed Objects.
Status: current	Access: read-only
OBJECT-IDENTITY

alaIND1NtpMIBCompliances		1.3.6.1.4.1.6486.801.1.2.1.26.1.2.2
Branch For Ntp Subsystem Managed Objects.
Status: current	Access: read-only
OBJECT-IDENTITY

alaNtpEnable		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.1
Enables/disables NTP clock discipline.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

alaNtpMonitorEnable		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.2
Enables/disables NTP monitor.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

alaNtpBroadcastEnable		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.3
Enables/disables NTP broadcast client.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

alaNtpPeerTable		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4
Table containing the synchronization host this switch will be associated with.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NtpPeerEntry

alaNtpPeerEntry		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1
Each entry corresponds to a synchronization host.
Status: current	Access: not-accessible
OBJECT-TYPE
	NtpPeerEntry

alaNtpPeerAddressType		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.1
The InetAddress type of the synchronization host. Only types InetAddressIPv4 (1) and InetAddressDNS (16) are supported.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressType

alaNtpPeerAddress		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.2
The InetAddress of the synchronization host.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddress

alaNtpPeerIpAddress		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.3
The IP address of the synchronization host derrived from the InetAddress.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

alaNtpPeerType		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.4
Type of synchronization host that will communicate with this switch.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	active(1), passive(2), client(3), server(4), broadcast(5), bclient(8)

alaNtpPeerAuth		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.5
The authorization keyid for the remote host.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

alaNtpPeerVersion		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.6
The NTP version to communicate with the remote host.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..255

alaNtpPeerMinpoll		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.7
The minimum poll duration to the remote host. This value is a power of 2 seconds when the poll will occur. For example, 4 (2 to the power 4) is 16 seconds. The maximum poll value is 10.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	4..10

alaNtpPeerPrefer		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.8
Marks the host as a preferred connection.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	prefer(1), noPrefer(2)

alaNtpPeerAdmin		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.9
Used in accordance to installation and removal conventions for conceptual rows. The RowStatus values that are supported are the following: active(1) - The row is active and valid. createAndGo(4) - The row will be created and activated. destroy(6) - The row will be destroyed.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

alaNtpPeerName		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.10
The DNS name for the peer association derrived from the InetAddress.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpPeerStratum		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.11
The stratum level of the remote peer. If this number is 16, the remote peer has not been synchronized. This parameter can only be set with a LOCALCLOCK server.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..16

alaNtpAuthDelay		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.5
This field sets a specified time interval that is added to timestamps included in requests to the server that required authentication. Typically this delay is needed in cases of long delay paths, or servers whose clocks are unsynchronized. Value is in milli-seconds
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

alaNtpBroadcastDelay		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.6
This field sets a specified time interval that is added to timestamps included in messages from broadcast servers. Value is in milli-seconds
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

alaNtpKeysFile		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.7
Name of the file which has the authorization keys.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpConfigReqKeyId		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.8
Request messages ask for information from the NTP entity such as timestamp information, statistics, etc. This changes the authentication key identifier for request messages sent from the switch to another NTP entity.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

alaNtpConfigCtlKeyId		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.9
Control messages attempt to change the configuration of the NTP entity in some fashion. This changes the authentication key identifier for control messages sent from the switch to another NTP entity.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

alaNtpConfigCfgKeyId		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.10
Configuration messages changes information on the NTP entity.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

alaNtpPrecision		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.11
This sets the server's advertised precision.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	-20..-1

alaNtpPeerTests		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.12
Enables/disable NTP peer synchronization tests. Disabling peer tests allows the NTP client to synchonize with servers that are themselves unsynchronized or would otherwise be eliminated by other time source tests.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

alaNtpSysStratum		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.13
The stratum level of the local server. If this number is 16 it indicates that the switch is not synchronized. This helps the clients to select clocks with lower stratum number
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	2..16

alaNtpMaxAssociation		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.14
The maximum number of peer and client associations that the switch will serve. This helps ensure that the switch isn't overwhelmed by huge numbers of NTP synchronization requests
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..64

alaNtpAuthenticate		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.15
Enable/Disable authentication of the NTP requests on the switch
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

alaNtpPeerListTable		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1
Used to display a brief list of all NTP associations related to this switch (servers, peers, etc.).
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NtpPeerListEntry

alaNtpPeerListEntry		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1
Each entry corresponds to one association.
Status: current	Access: not-accessible
OBJECT-TYPE
	NtpPeerListEntry

alaNtpPeerListAddressType		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.1
The InetAddress type of the synchronization host. InetAddressIPv4 (1) is the only type currently supported.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressType

alaNtpPeerListAddress		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.2
The InetAddress of the association.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddress

alaNtpPeerListIpAddress		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.3
The IP address of the association.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

alaNtpPeerListLocal		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.4
The local interface address assigned by NTP to the remote association. If this address is 0.0.0.0, then the local address has yet to be determined.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

alaNtpPeerListStratum		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.5
The stratum level of the remote peer. If this number is 16, the remote peer has not been synchronized.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

alaNtpPeerListPoll		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.6
The polling interval, in seconds.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

alaNtpPeerListReach		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.7
The reachability register of the remote association, in octal format. This number is determined by the NTP algorithm.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

alaNtpPeerListDelay		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.8
The currently estimated delay of this remote association, in seconds. This time is determined by the NTP algorithm.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpPeerListOffset		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.9
The currently estimated offset of this remote association, in seconds. This time is determined by the NTP algorithm.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpPeerListDispersion		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.10
The currently estimated dispersion of this remote association, in seconds. This time is determined by the NTP algorithm.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpPeerListSynced		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.11
Indicates that NTP is synchronized with this entity.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	synchronized(1), notSynchronized(2)

alaNtpPeerListName		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.12
The DNS name for the peer association,
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpInfoPeer		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.1
The IP address of the remote association.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

alaNtpInfoMode		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.2
The peer mode of this remote association.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpInfoLeapIndicator		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.3
The status of leap second insertion for this association.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noLeapWarning(0), leapAddSecond(1), leapDeleteSecond(2), leapNotInSync(3)

alaNtpInfoStratum		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.4
The stratum level of the remote peer. If this number is 16, the remote peer has not been synchronized.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

alaNtpInfoPrecision		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.5
The advertised precision of the switch. It will be a number between -4 and -20.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	-20..-4

alaNtpInfoDistance		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.6
This is a signed fixed-point number indicating the total roundtrip delay to the primary reference source at the root of the synchronization subnet, in seconds.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpInfoDispersion		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.7
This is a signed fixed-point number indicating the maximum error relative to the primary reference source at the root of the synchronization subnet, in seconds.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpInfoReferenceId		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.8
This is a 32-bit code identifying the particular reference clock. Can be an IP address.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpInfoReferenceTime		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.9
This is the local time at which the local clock was last set or corrected.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpInfoFrequency		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.10
A number determining the local clocks frequency in relation to a reference clock's Pulse per Second (PPS). If the clock is running in perfect synchronization, this number should be 1. Otherwise, it will be slightly lower or higher in order to compensate for the time difference.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpInfoStability		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.11
The stability of the clock in relation to a reference clock's Pulse per Second (PPS).
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpInfoBroadcastDelay		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.12
The broadcast delay, in seconds, of this association.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpInfoAuthDelay		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.13
The authentication delay, in seconds, of this association.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpPeerShowTable		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3
Used to display a brief list of all NTP associations related to this switch (servers, peers, etc.).
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NtpPeerShowEntry

alaNtpPeerShowEntry		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1
Each entry corresponds to one association.
Status: current	Access: not-accessible
OBJECT-TYPE
	NtpPeerShowEntry

alaNtpPeerShowRemoteAddressType		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.1
The InetAddress type of the synchronization host. InetAddressIPv4 (1) is the only type currently supported.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressType

alaNtpPeerShowRemoteAddress		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.2
The InetAddress of the remote association.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddress

alaNtpPeerShowRemoteIpAddress		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.3
The IP address of the remote association.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

alaNtpPeerShowLocal		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.4
The local interface address assigned by NTP to the remote associations.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

alaNtpPeerShowHmode		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.5
The host mode of this remote association.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpPeerShowPmode		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.6
The peer mode of this remote association.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpPeerShowStratum		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.7
The stratum level of the remote peer.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

alaNtpPeerShowPrecision		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.8
The advertised precision of this association, which is a number from -4 to -20.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	-20..-4

alaNtpPeerShowLeapIndicator		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.9
The status of leap second insertion for this association.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noLeapWarning(0), leapAddSecond(1), leapDeleteSecond(2), leapNotInSync(3)

alaNtpPeerShowReferenceId		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.10
This is a 32-bit code identifying the peers primary reference source. Normally an IP address.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpPeerShowRootDistance		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.11
This is a signed fixed-point number indicating the total roundtrip delay to the primary reference source at the root of the synchronization subnet, in seconds.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpPeerShowRootDispersion		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.12
This is a signed fixed-point number indicating the maximum error relative to the primary reference source at the root of the synchronization subnet, in seconds.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpPeerShowPpoll		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.13
The poll time for this association when it is a peer.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

alaNtpPeerShowHpoll		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.14
The poll time for this association when it is a host.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

alaNtpPeerShowKeyid		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.15
This is an integer identifying the cryptographic key used to generate the message authentication code.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

alaNtpPeerShowVersion		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.16
What version of NTP this association is using.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

alaNtpPeerShowAssociation		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.17
The number of seconds since this NTP entity was associated with the switch.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

alaNtpPeerShowValid		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.18
This is an integer indicating the validity of current NTP system variables. The validity is made false if system variable are changed and a new peer sample under the changed configuration has not been received.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	false(0), true(1)

alaNtpPeerShowReach		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.19
This is a shift register used to determine the reachability status of this peer.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

alaNtpPeerShowUnreach		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.20
The number of times this NTP entity was unreachable.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..15

alaNtpPeerShowFlash		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.21
This bitmap reveals the state at the last grumble from the peer and are most handy for diagnosing problems. Duplicate packet: 0x0001 Bogus packet: 0x0002 Protocol unsynchronized: 0x0004 Access denied: 0x0008 Authentication failure: 0x0010 Peer clock unsynchronized: 0x0020 Peer stratum out: 0x0040 Root delay/dispersion bounds check: 0x0080 Peer delay dispersion bounds check: 0x0100 Autokey failed: 0x0200 Proventic not confirmed: 0x0400
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..32767

alaNtpPeerShowBroadcastOffset		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.22
The broadcast delay.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpPeerShowTTL		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.23
This field displays the Time-to-Live (TTL) time in seconds and the mode (unicast, multicast, or broadcast) of NTP messages sent to a broadcast address.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

alaNtpPeerShowTimer		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.24
The time to next poll in seconds.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..2147483647

alaNtpPeerShowFlags		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.25
This details which flags have been configured for this peer. Association configured: 0x01 System peer: 0x02 Enabled for burst mode synchronization: 0x04 Reference clock: 0x08 Preferred server: 0x10 Authentable: 0x20 Synchronization candidate: 0x40 Synchronization candidates short-list: 0x80
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

alaNtpPeerShowReferenceTime		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.26
This is the local time, in timestamp format, when the peer clock was last updated.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpPeerShowOriginateTime		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.27
This is the local time, in timestamp format, of the peer when its latest NTP message was sent.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpPeerShowReceiveTime		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.28
This is the local time, in timestamp format, when the latest NTP message from the peer arrived.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpPeerShowTransmitTime		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.29
This is the local time, in timestamp format, at which the last NTP message was sent from this association.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpPeerShowOffset		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.30
The currently estimated offset of this remote association, in seconds.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpPeerShowDelay		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.31
The currently estimated delay of this remote association, in seconds.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpPeerShowDispersion		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.32
The currently estimated dispersion of this remote association, in seconds.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpPeerShowName		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.33
The DNS name for the peer association,
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpPeerShowStatus		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.34
Peer selection status: Bits 0 - 7 - Rejected due to high stratum and/or failed sanity checks: 1 - Designated falsticker by the intersection algorithm: 2 - Excess, culled from the end of the candidate list: 3 - Outlyer, discarded by the clustering algorithm: 4 - Candidate, included in the final selection set: 5 - Selected for synchronization; but distance exceeds maximum: 6 - Selected for synchronization: 7 - Selected for synchronization, PPS signal in use: 8 Peer association status: Bits 9 - 12 - Peer association configured: 9 - Peer authentication required: 10 - Last peer message authenticated: 11 - Peer reachable: 12
Status: current	Access: read-only
OBJECT-TYPE
	BITS	rejected(0), falsticker(1), excess(2), outlyer(3), candidate(4), exceedsMaxDistance(5), selected(6), selectedPPS(7), reachable(8), authenticated(9), authenticationRequired(10), configured(11)

alaNtpStatsStatUptime		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.1
The number of seconds the local NTP server has been associated with the switch.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsStatReset		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.2
The number of seconds since the last time the local NTP server has been restarted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsStatBadStratum		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.3
The number of NTP packets received that had a corrupted stratum bit in the data of the packet.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsStatOldVersion		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.4
The number of NTP packets received that were of an older version of NTP (either version 1 or 2).
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsStatNewVersion		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.5
The number of NTP packets received that were version 3 of NTP.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsStatUnknownVersion		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.6
The number of NTP packets received that the version was unknown (most likely due to packet corruption).
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsStatBadLength		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.7
The number of NTP packets received that did not fit the NTP packet structure (most likely due to packet corruption).
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsStatProcessed		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.8
The total number of NTP packets processed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsStatBadAuth		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.9
The number of NTP packets rejected because they did not meet authentication standards.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsStatLimitRejects		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.10
The number of NTP packets rejected because they did not meet authentication standards.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsPeerTable		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2
Table containing the synchronization host statistics.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NtpStatsPeerEntry

alaNtpStatsPeerEntry		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1
Each entry corresponds to a synchronization host.
Status: current	Access: not-accessible
OBJECT-TYPE
	NtpStatsPeerEntry

alaNtpStatsPeerAddressType		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.1
The InetAddress type of the synchronization host. InetAddressIPv4 (1) is the only type currently supported.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressType

alaNtpStatsPeerAddress		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.2
The InetAddress of the synchronization host.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddress

alaNtpStatsPeerIpAddress		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.3
The IP address of the synchronization host.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

alaNtpStatsPeerLocal		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.4
The local interface address assigned by NTP to the remote association.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

alaNtpStatsPeerLastRcv		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.5
The time since the last packet was received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsPeerNextSend		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.6
The time until the next packet is to be sent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsPeerReachChange		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.7
The time that the peer has been reachable.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsPeerPacketsSent		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.8
The number of packets that have been sent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsPeerPacketsRcvd		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.9
The number of packets that have been received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsPeerBadAuth		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.10
The number of packets received with bad authentication.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsPeerBogusOrigin		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.11
The number of bogus packets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsPeerDuplicate		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.12
The number of duplicated packets received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsPeerBadDispersion		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.13
The number bad dispersions.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsPeerBadRefTime		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.14
The number of bad reference times received.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsPeerCandidateOrder		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.15
The order of synchronization candidates.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsPeerReset		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.16
The number of seconds since the statistics for this peer were last reset. Writing any value will reset the peer statistics.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..2147483647

alaNtpStatsPeerName		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.17
The DNS name for the peer association,
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpStatsLoopOffset		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.5.1
The currently estimated offset of this remote association, in seconds. This counter indicates the offset of the peer clock relative to the local clock.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpStatsLoopFrequency		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.5.2
A number determining the local clocks frequency in relation to a reference clocks Pulse per Second (PPS). If the clock is running in perfect synchronization, this number should be 1. Otherwise, it will be slightly lower or higher in order to compensate for the time discrepancy between the reference clock and the local clock.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpStatsLoopPollAdjust		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.5.3
Determines the peer polling time.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	-30..30

alaNtpStatsLoopWatchdog		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.5.4
Makes sure that NTP timer continues to run.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsIoReset		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.1
The number of seconds since the last restart of NTP.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsIoRcvBuffers		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.2
The number of switch receive buffers currently being used by this NTP entity.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsIoFreeRcvBuffers		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.3
The number of free receive buffers.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsIoUsedRcvBuffers		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.4
The number of receive buffers currently being used.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsIoRefills		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.5
The number of times we added packets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsIoDroppedPackets		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.6
The number of packets dropped.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsIoIgnoredPackets		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.7
The number of packets ignored.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsIoRcvPackets		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.8
The total number of NTP packets received by the switch.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsIoSentPackets		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.9
The total number of NTP packets sent by the switch.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsIoNotSentPackets		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.10
The number of NTP packets generated but not sent due to restrictions.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsIoInterrupts		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.11
The number of times NTP information was interrupted in the process of transmitting or receiving.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsIoInterruptsRcv		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.12
The number of packets received by the interrupt handler.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsReset		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.5
Resets the statistics counters for the following subsystems: 0x01 - all peers 0x02 - i/o 0x04 - system 0x08 - memory 0x10 - timer 0x20 - authentication 0x40 - control
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..127

alaNtpStatsMonitorTable		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6
Table containing the association monitoring list.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NtpStatsMonitorEntry

alaNtpStatsMonitorEntry		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1
Each entry corresponds to a synchronization host.
Status: current	Access: not-accessible
OBJECT-TYPE
	NtpStatsMonitorEntry

alaNtpStatsMonitorIndex		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.1
Table index.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..65535

alaNtpStatsMonitorAddress		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.2
The IP address of the remote association.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

alaNtpStatsMonitorPort		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.3
The IP port number of the association.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

alaNtpStatsMonitorLocalAddress		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.4
The local IP address of the association.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

alaNtpStatsMonitorCount		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.5
The number of NTP packets received from this association.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsMonitorMode		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.6
The mode the NTP association uses in relation to the switch.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpStatsMonitorVersion		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.7
The version of NTP the association is using.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

alaNtpStatsMonitorDrop		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.8
The number of NTP packets received from this association that were dropped.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsMonitorLast		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.9
The number of seconds since the last NTP message has been received from this association.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsMonitorFirst		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.10
The number of seconds since the first NTP message has been received from this association.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpStatsMonitorName		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.11
The DNS name for the peer association,
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alaNtpAccessKeyIdTable		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.1
Table containing the trusted keys.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NtpAccessKeyIdEntry

alaNtpAccessKeyIdEntry		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.1.1
Entry of a trusted key.
Status: current	Access: not-accessible
OBJECT-TYPE
	NtpAccessKeyIdEntry

alaNtpAccessKeyIdKeyId		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.1.1.1
Keyid of the key in the key file.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0..65535

alaNtpAccessKeyIdTrust		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.1.1.2
The current state of trust of the table entry.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	trusted(1), untrusted(2)

alaNtpAccessRestrictedTable		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.2
Table containing the restricted addresses.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NtpAccessRestrictedEntry

alaNtpAccessRestrictedEntry		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.2.1
Entry of a restricted address.
Status: current	Access: not-accessible
OBJECT-TYPE
	NtpAccessRestrictedEntry

alaNtpAccessRestrictedIpAddress		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.2.1.1
IP address to restrict.
Status: current	Access: not-accessible
OBJECT-TYPE
	IpAddress

alaNtpAccessRestrictedMask		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.2.1.2
IP mask to restrict.
Status: current	Access: not-accessible
OBJECT-TYPE
	IpAddress

alaNtpAccessRestrictedRestrictions		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.2.1.3
A mask indicating the restrictions to apply to the entry. 0x0001 - ignore, Ignore all packets from hosts. Can't use this on default (0.0.0.0). 0x0002 - noserve, Ignore NTP packets other than information queries and config-uration requests. 0x0004 - notrust, Treat these hosts normally in other respects, but never use them as synchronization sources. 0x0008 - noquery, Ignore all NTP information queries and configuration requests from the source. 0x0010 - nomodify, Ignore all NTP information queries and configuration requests that attempt to modify the state of the server. 0x0020 - nopeer, Provide stateless time service to polling hosts, but do not allocate peer memory resources to these hosts even if they otherwise might be considered useful as future synchronization partners. 0x0040 - notrap, Decline to provide control message trap service to matching hosts. 0x0080 - lowpriotrap, Declare traps set by matching hosts to be low priority. 0x0100 - limited, These hosts are subject to a limitation of the number of clients from the same net. 0x0200 - version. Serves only current version. 0x0400 - demobilize. A demobilization packet (kod) packet is sent.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..1023

alaNtpAccessRestrictedCount		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.2.1.4
Number of packets matched.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alaNtpAccessRestrictedRowStatus		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.2.1.5
Used in accordance to installation and removal conventions for conceptual rows. The RowStatus values that are supported are the following: active(1) - The row is active and valid. createAndGo(4) - The row will be created and activated. destroy(6) - The row will be destroyed.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

alaNtpAccessRereadKeyFile		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.3
Reloads the keyfile containing all currently existing keys into the alaNtpAccessKeyIdTable in the switch's memory. Reading this object will yield one of the three following values: inProgress(2), successful(3), failed(4) A value of inProgress means that table reload procedure is inProgress and not yet complete. A sucessful reply means the last attempted keyfile load completed successfully. A failed response indicates the last attempt to reload failed. Writing a value of 1 to this object initiates a reload of the table.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	reload(1), inProgress(2), successful(3), error(4)

ntpClientConfig		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.9
The Agent Config Information 1 -- Default(Loopback0 or closest IP) 2 -- Non Loopback0 3 -- Interface IP Specified by User
Status: deprecated	Access: read-write
OBJECT-TYPE
	INTEGER	default(1), nonLoopback0(2), userIp(3)

ntpClientIP		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.10
The interface IP Address to be used in NTP Packets for Source IP field.
Status: deprecated	Access: read-write
OBJECT-TYPE
	IpAddress

alaNtpSrcIpConfig		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.11
The Agent Config Information 1 -- Default(Loopback0 or closest IP) 2 -- Non Loopback0 3 -- Interface IP Specified by User This object has been obsoleted. Use the alaIpManagedIntfEntry objects in AlcatelIND1Ip.mib
Status: obsolete	Access: read-write
OBJECT-TYPE
	INTEGER	default(1), nonLoopback0(2), userIp(3)

alaNtpSrcIp		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.12
The interface IP Address to be used in NTP Packets for Source IP field. This object has been obsoleted. Use the alaIpManagedIntfEntry objects in AlcatelIND1Ip.mib
Status: obsolete	Access: read-write
OBJECT-TYPE
	IpAddress

alaIND1NtpMonitorMIBCompliance		1.3.6.1.4.1.6486.801.1.2.1.26.1.2.2.1
Compliance statement for Health Monitoring.
Status: current	Access: read-write
MODULE-COMPLIANCE

alaNtpConfigGroup		1.3.6.1.4.1.6486.801.1.2.1.26.1.2.1.1
Collection of NTP configuration objects.
Status: current	Access: read-write
OBJECT-GROUP

alaNtpInfoGroup		1.3.6.1.4.1.6486.801.1.2.1.26.1.2.1.2
Collection of NTP peer information objects.
Status: current	Access: read-write
OBJECT-GROUP

alaNtpStatsGroup		1.3.6.1.4.1.6486.801.1.2.1.26.1.2.1.3
Collection of NTP peer information objects.
Status: current	Access: read-write
OBJECT-GROUP

alaNtpStatsStatGroup		1.3.6.1.4.1.6486.801.1.2.1.26.1.2.1.4
Collection of NTP statistic objects.
Status: current	Access: read-write
OBJECT-GROUP

alaNtpStatsLoopGroup		1.3.6.1.4.1.6486.801.1.2.1.26.1.2.1.5
Collection of NTP clocking objects.
Status: current	Access: read-write
OBJECT-GROUP

alaNtpStatsIoGroup		1.3.6.1.4.1.6486.801.1.2.1.26.1.2.1.6
Collection of NTP send and receive statistics objects.
Status: current	Access: read-write
OBJECT-GROUP

alaNtpAccessGroup		1.3.6.1.4.1.6486.801.1.2.1.26.1.2.1.7
Collection of NTP authentication control objects.
Status: current	Access: read-write
OBJECT-GROUP

alaNtpLocalInfoGroup		1.3.6.1.4.1.6486.801.1.2.1.26.1.2.1.8
Collection of NTP local clock information objects.
Status: current	Access: read-write
OBJECT-GROUP

alaNtpEventsGroup		1.3.6.1.4.1.6486.801.1.2.1.26.1.2.1.9
Notify the management entity on reaching the maximum allowable NTP client and peer associations.
Status: current	Access: read-write
NOTIFICATION-GROUP

alaNtpSrcIpGroup		1.3.6.1.4.1.6486.801.1.2.1.26.1.2.1.10
Collection of NTP source IP information objects.
Status: current	Access: read-write
OBJECT-GROUP

alaNtpClientListTable		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.4
Used to display a brief list of all incoming NTP client associations related to this switch.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NtpClientListEntry

alaNtpClientListEntry		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.4.1
Each entry corresponds to one association.
Status: current	Access: not-accessible
OBJECT-TYPE
	NtpClientListEntry

alaNtpClientListAddressType		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.4.1.1
The InetAddress type of the incoming client association. InetAddressIPv4 (1) is the only type currently supported.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressType	1

alaNtpClientListAddress		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.4.1.2
The InetAddress of the client.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddress

alaNtpClientListVersion		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.4.1.3
The NTP version used by the remote host for communication.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	3..4

alaNtpClientKey		1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.4.1.4
The authorization keyid for the remote host.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

alaNtpEvents		1.3.6.1.4.1.6486.801.1.2.1.26.1.3
OBJECT IDENTIFIER

alaNtpEventsRoot		1.3.6.1.4.1.6486.801.1.2.1.26.1.3.0
OBJECT IDENTIFIER

alaNtpMaxAssocTrap		1.3.6.1.4.1.6486.801.1.2.1.26.1.3.0.1
Notify the management entity on reaching the maximum allowable NTP client and peer associations.
Status: current	Access: read-only
NOTIFICATION-TYPE