COM21-HCXSTUPRXY-MIB

File: COM21-HCXSTUPRXY-MIB.mib (84421 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC COM21-HCX-MIB
COM21-HCXALM-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 IpAddress Gauge32
TimeTicks DisplayString MacAddress
com21 com21Hcx com21Stu
com21Traps hcxAlmSeverity hcxEventLogTime

Defined Types

FrequencyKhz  
INTEGER 0..800000    

UpstrmFreqKhz  
INTEGER 5000..40000    

EpochTime  
INTEGER 0..2147483647    

Offset  
INTEGER 0..16383    

AlarmSeverity  
INTEGER clear(1), warning(2), minor(3), major(4), critical(5)    

Com21RowStatus  
INTEGER active(1), create(2), destroy(3), deactive(4)    

StuControlEntry  
SEQUENCE    
  stuCtrlMacAddress MacAddress
  stuUserText DisplayString
  stuSerialNumber DisplayString
  stuBoardRevision DisplayString
  stuUnitRevision DisplayString
  stuTunerRevision DisplayString
  stuModelName DisplayString
  stuUnitManufacturer DisplayString
  stuDesKeySize INTEGER
  stuMibRevision DisplayString
  stuEpochTime EpochTime
  stuRestartAction INTEGER
  stuPrevTestResult INTEGER
  stuPrevTestFailCode INTEGER
  stuOperationState INTEGER
  stuAimModuleId INTEGER
  stuUpstrmTestFreq UpstrmFreqKhz
  stuInbPresent INTEGER
  stuInbContToneEnable INTEGER
  stuLastRestartCause INTEGER
  stuUpstrmPingCntrl INTEGER
  stuUpstrmTestTimeout INTEGER
  stuDnstrmAltFreq FrequencyKhz
  stuAsicRevision INTEGER
  stuVoiceAimLpBk INTEGER
  stuVoiceAimPort1Status INTEGER
  stuVoiceAimPort2Status INTEGER

StuPhysicalEntry  
SEQUENCE    
  stuPhyMacAddress MacAddress
  stuXmitFrequency UpstrmFreqKhz
  stuRecvFrequency FrequencyKhz
  stuRecvRfSrEstimate Integer32
  stuRecvRfSigLevel Integer32
  stuXmitOffset Offset
  stuXmitDacVRef INTEGER
  stuRecvFreqDrift INTEGER

StuAlarmEntry  
SEQUENCE    
  stuAlmMacAddress MacAddress
  stuAlmTime EpochTime
  stuAlmTrapId INTEGER
  stuAlmSeverity AlarmSeverity

StuAlarmSevEntry  
SEQUENCE    
  stuAlmSevMacAddress MacAddress
  stuAlmSevCrcThres INTEGER
  stuAlmSevTeiThres INTEGER
  stuAlmSevHecThres INTEGER
  stuAlmSevEsThres INTEGER
  stuAlmSevFecThres INTEGER

StuEtherConfigEntry  
SEQUENCE    
  stuEthMacAddress MacAddress
  stuEtherFiltFlushAction INTEGER
  stuEtherForwArpOnly INTEGER
  stuEtherMacFiltAge INTEGER
  stuEtherBCastRateEn INTEGER
  stuEtherBCastRateCo INTEGER
  stuEtherStickyBitCtrl INTEGER
  stuEther8021QEnable INTEGER
  stuEtherNonSnapRej INTEGER
  stuEtherIgmpEnable INTEGER
  stuEtherNonIpMultiEn INTEGER
  stuEtherBcmpOnly INTEGER
  stuEtherIgmpSnoopEnable INTEGER

StuFiltEthTypeEntry  
SEQUENCE    
  stuFiltEtherMacAddr MacAddress
  stuFiltEtherType INTEGER
  stuFiltEtherStatus Com21RowStatus

StuFiltIpMultiEntry  
SEQUENCE    
  stuFiltIpMacAddr MacAddress
  stuFiltIpMultiAddr MacAddress
  stuFiltIpMultiStatus Com21RowStatus
  stuFiltIpDirectCntrl INTEGER

StuEtherMacEntry  
SEQUENCE    
  stuEtherStuMac MacAddress
  stuEtherMacAddr MacAddress
  stuEtherMacType INTEGER
  stuEtherMacStatus Com21RowStatus

StuEtherStatsEntry  
SEQUENCE    
  stuEthStatsMacAddr MacAddress
  stuCurrEtherRunts Gauge32
  stuCurrEtherCollitns Gauge32
  stuCurrEtherFramErrs Gauge32
  stuCurrEtherCrcErrs Gauge32
  stuCurrEtherCrcThres Integer32
  stuCurrEtherTxUnder Gauge32
  stuCurrEtherRxOver Gauge32
  stuCurrEtherDropFrms Gauge32
  stuPrevEtherRunts Gauge32
  stuPrevEtherCollitns Gauge32
  stuPrevEtherFramErrs Gauge32
  stuPrevEtherCrcErrs Gauge32
  stuPrevEtherTxUnder Gauge32
  stuPrevEtherRxOver Gauge32
  stuPrevEtherDropFrms Gauge32
  stuEtherConnState INTEGER
  stuEtherClearStats INTEGER

StuStatsEntry  
SEQUENCE    
  stuStatsMacAddress MacAddress
  stuStatsCurrAtmTei Gauge32
  stuAtmTeiThreshold Integer32
  stuStatsCurrAtmHec Gauge32
  stuAtmHecThreshold Integer32
  stuStatsCurrESMin Gauge32
  stuESMinThreshold Integer32
  stuStatsCurrFecCorrect Gauge32
  stuFecCorrectThreshold Integer32
  stuStatsCurrUASMin Gauge32
  stuStatsPrevAtmTei Gauge32
  stuStatsPrevAtmHec Gauge32
  stuStatsPrevESMin Gauge32
  stuStatsPrevFecCorrect Gauge32
  stuStatsPrevUASMin Gauge32
  stuStatsClearStats INTEGER

StuQStatsEntry  
SEQUENCE    
  stuAtmStuMacAddr MacAddress
  stuAtmStuQNo Integer32
  stuAtmStatsCurrMinRx Gauge32
  stuAtmStatsCurrMinRxDropped Gauge32
  stuAtmStatsCurrMinCRCErrors Gauge32
  stuAtmStatsPrevMinRx Gauge32
  stuAtmStatsPrevMinRxDropped Gauge32
  stuAtmStatsPrevMinCRCErrors Gauge32
  stuAtmStatsClearStats INTEGER

StuCodeImageEntry  
SEQUENCE    
  stuCodeStuMacAddr MacAddress
  stuCodeImageIndex INTEGER
  stuCodeImageType INTEGER
  stuCodeImageVersion DisplayString
  stuCodeImageBuildDir DisplayString
  stuCodeImageDate DisplayString
  stuCodeImageTime DisplayString

StuVoiceChanStatsEntry  
SEQUENCE    
  stuVoiceChanStatsMacAddr MacAddress
  stuVoiceChanStatsNum INTEGER
  stuVoiceChanStatsCurrLostCellCnt Gauge32
  stuVoiceChanStatsCurrDrpdCellCnt Gauge32
  stuVoiceChanStatsCurrCrc3ErrCnt Gauge32
  stuVoiceChanStatsCurrSetUpFailCnt Gauge32
  stuVoiceChanStatsCurrTxVoiceCellCnt Gauge32
  stuVoiceChanStatsCurrRxVoiceCellCnt Gauge32
  stuVoiceChanStatsCurrTxOamCellCnt Gauge32
  stuVoiceChanStatsCurrRxOamCellCnt Gauge32
  stuVoiceChanStatsPrevLostCellCnt Gauge32
  stuVoiceChanStatsPrevDrpdCellCnt Gauge32
  stuVoiceChanStatsPrevCrc3ErrCnt Gauge32
  stuVoiceChanStatsPrevSetUpFailCnt Gauge32
  stuVoiceChanStatsPrevTxVoiceCellCnt Gauge32
  stuVoiceChanStatsPrevRxVoiceCellCnt Gauge32
  stuVoiceChanStatsPrevTxOamCellCnt Gauge32
  stuVoiceChanStatsPrevRxOamCellCnt Gauge32
  stuVoiceChanStatsClear INTEGER

Defined Values

com21StuPrxy 1.3.6.1.4.1.1141.3.1
This is the Com21 ComController ComPort Proxy MIB. COM21 Part# 005-0025-00
MODULE-IDENTITY    

com21StuControlGroup 1.3.6.1.4.1.1141.3.2
OBJECT IDENTIFIER    

com21StuPhysicalGroup 1.3.6.1.4.1.1141.3.3
OBJECT IDENTIFIER    

com21StuAlarmGroup 1.3.6.1.4.1.1141.3.4
OBJECT IDENTIFIER    

com21StuEtherConfigGroup 1.3.6.1.4.1.1141.3.5
OBJECT IDENTIFIER    

com21StuEtherTypeGroup 1.3.6.1.4.1.1141.3.6
OBJECT IDENTIFIER    

com21StuFiltIpMultiGroup 1.3.6.1.4.1.1141.3.7
OBJECT IDENTIFIER    

com21StuEtherMacGroup 1.3.6.1.4.1.1141.3.8
OBJECT IDENTIFIER    

com21StuEtherStatsGroup 1.3.6.1.4.1.1141.3.9
OBJECT IDENTIFIER    

com21StuStatsGroup 1.3.6.1.4.1.1141.3.10
OBJECT IDENTIFIER    

com21StuQStatsGroup 1.3.6.1.4.1.1141.3.11
OBJECT IDENTIFIER    

com21StuAlarmSevGroup 1.3.6.1.4.1.1141.3.12
OBJECT IDENTIFIER    

com21StuCodeImageGroup 1.3.6.1.4.1.1141.3.13
OBJECT IDENTIFIER    

com21StuVoiceChanStatsGroup 1.3.6.1.4.1.1141.3.14
OBJECT IDENTIFIER    

com21StuControlTable 1.3.6.1.4.1.1141.3.2.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StuControlEntry

com21StuControlEntry 1.3.6.1.4.1.1141.3.2.1.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  StuControlEntry  

stuCtrlMacAddress 1.3.6.1.4.1.1141.3.2.1.1.1
Contains IEEE 802 medium access control address of the ComPort device.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

stuUserText 1.3.6.1.4.1.1141.3.2.1.1.2
The ComPort User Text is a non-volatile string which is set by the management system with an arbitrary value. This value does not have to be unique. It's purpose is solely to assist the carrier personnel with identifying the ComPort device.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(32)  

stuSerialNumber 1.3.6.1.4.1.1141.3.2.1.1.3
The Serial Number is a 10 character serial number used by COM21 to uniquely identify the device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(16)  

stuBoardRevision 1.3.6.1.4.1.1141.3.2.1.1.4
This string defines the hardware revision of the ComPort board.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(16)  

stuUnitRevision 1.3.6.1.4.1.1141.3.2.1.1.5
This string defines the hardware revision of the complete ComPort unit.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(10)  

stuTunerRevision 1.3.6.1.4.1.1141.3.2.1.1.6
This string defines the hardware revision of the RF Tuner.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(10)  

stuModelName 1.3.6.1.4.1.1141.3.2.1.1.7
This string defines the ComPort Model Type.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(16)  

stuUnitManufacturer 1.3.6.1.4.1.1141.3.2.1.1.8
This string defines the manufacturer of the ComPort. Initially COM21 and 3COM.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

stuDesKeySize 1.3.6.1.4.1.1141.3.2.1.1.9
DES encryption key size supported by the ComPort.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER bit56key(1), bit40key(2)  

stuMibRevision 1.3.6.1.4.1.1141.3.2.1.1.10
Indicates the Mib Revision as display string of max. 8 bytes. That includes string terminator.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(16)  

stuEpochTime 1.3.6.1.4.1.1141.3.2.1.1.11
ComPort time in seconds since 1970.
Status: current Access: read-write
OBJECT-TYPE    
  EpochTime  

stuRestartAction 1.3.6.1.4.1.1141.3.2.1.1.12
The Restart Action is an active-value. The setting of this value is idempotent. The setting of this value to restart causes the STU to restart utilizing the present software load.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER nil(1), restart(2)  

stuPrevTestResult 1.3.6.1.4.1.1141.3.2.1.1.13
Result of previous test. Presently this will be warm or cold restart.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER success(1), failure(2)  

stuPrevTestFailCode 1.3.6.1.4.1.1141.3.2.1.1.14
Failure result code. Only set if stuPrevTestResult is equal to failure.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -32768..-1  

stuOperationState 1.3.6.1.4.1.1141.3.2.1.1.15
The ComPort Operational State is controlled either by the stuAdminState or locally detected conditions. Note that downloading and failedRanging are ComController helded states.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER operational(1), deauthorized(2), offline(3), upstreamTest(4), etherLoopback(5), downloading(6), failedRanging(7)  

stuOperationStateChange 1.3.6.1.4.1.1141.4.110
.
Status: current Access: read-only
NOTIFICATION-TYPE    

stuAimModuleId 1.3.6.1.4.1.1141.3.2.1.1.16
identifies the connected AIM module type. The maceEthernet entry indicates NO AIM inserted.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), debugModule(2), teleReturn(3), telephony1(4), telephony2(5), wirelessEthernet(6), atm(7)  

stuMaceFail 1.3.6.1.4.1.1141.4.119
This trap would be sent after ComPort is completely booted. That is, at least download is completed. Event will be detected during POST (Power On Self Test)
Status: current Access: read-only
NOTIFICATION-TYPE    

stuUpstrmTestFreq 1.3.6.1.4.1.1141.3.2.1.1.17
Transmit Frequency used by ComPort for Upstream RF test. The default shall be 0 (an invalid freq).
Status: current Access: read-write
OBJECT-TYPE    
  UpstrmFreqKhz  

stuInbPresent 1.3.6.1.4.1.1141.3.2.1.1.19
Indicates if the INB is present on the ComPORT. This is a future item not supported by present ComPORT hardware.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inbInstalled(1), noInbSupport(2), inbReady(3)  

stuInbContToneEnable 1.3.6.1.4.1.1141.3.2.1.1.20
Controls the activation of a continuous pilot tone. This does not effect the standard tone sent before data (which is controlled by a hardware switch). This value is not stored in NVRAM. Default is disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

stuLastRestartCause 1.3.6.1.4.1.1141.3.2.1.1.21
specifies the reason for the last ComPort reset.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), hcxDirected(2), pingFail(3), imageRefresh(4), lof(5), fault(6)  

stuUpstrmPingCntrl 1.3.6.1.4.1.1141.3.2.1.1.22
used to control the upstream ping. Default is enable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

stuUpstrmTestTimeout 1.3.6.1.4.1.1141.3.2.1.1.23
timeout used by ComPort for Upstream RF test. If the ComController does not terminate the test in this period - defined in seconds - then the ComPort will automatically reset, thus terminating the test. 0 means no timeout. Default is 0.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..86400  

stuDnstrmAltFreq 1.3.6.1.4.1.1141.3.2.1.1.24
Defines an alternate downstream frequency for the ComPort. This value is non-voltile. Default is 0 (an invalid freq). IMPORTANT - this is a tbd feature not available in 2.3 release.
Status: current Access: read-write
OBJECT-TYPE    
  FrequencyKhz  

stuAsicRevision 1.3.6.1.4.1.1141.3.2.1.1.25
defines the revision of the ASIC. Presently values 1-255 are supported.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

stuVoiceAimLpBk 1.3.6.1.4.1.1141.3.2.1.1.26
If a voiceAim Module is configured on the stu, setting the Aim Module to stuLpBk will configure the Aim Module to loopback from one voice port to the other. default: nil
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER nil(1), stuLpBk(2)  

stuVoiceAimPort1Status 1.3.6.1.4.1.1141.3.2.1.1.27
Describes whether the AimPort is onhook or offhook. default: nil
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER onHook(1), offHook(2)  

stuVoiceAimPort2Status 1.3.6.1.4.1.1141.3.2.1.1.28
Describes whether the AimPort is onhook or offhook. default: nil
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER onHook(1), offHook(2)  

com21StuPhysicalTable 1.3.6.1.4.1.1141.3.3.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StuPhysicalEntry

com21StuPhysicalEntry 1.3.6.1.4.1.1141.3.3.1.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  StuPhysicalEntry  

stuPhyMacAddress 1.3.6.1.4.1.1141.3.3.1.1.1
Contains IEEE 802 medium access control address of the ComPort device.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

stuXmitFrequency 1.3.6.1.4.1.1141.3.3.1.1.2
Contains the transmit frequency of the ComPort RF board in KHz. A change in this value shall result in the ComPort being hopped to a differing RX card. The Common Controller shall ensure the sanity of a change to this attribute and shall perform the necessary interface to the RX cards. The actual set of this attribute on the ComPort shall be performed by a GO_SET message.
Status: current Access: read-write
OBJECT-TYPE    
  UpstrmFreqKhz  

stuXmitFeqChange 1.3.6.1.4.1.1141.4.111
This trap is generated whenever an ComPort is hopped. It will not be generated at initial acquisition.
Status: current Access: read-write
NOTIFICATION-TYPE    

stuRecvFrequency 1.3.6.1.4.1.1141.3.3.1.1.3
Contains the receive frequency in KHz. This attribute will match the downstream frequency of the ComController. The ONLY time when this should be change is when the NMAPS wishes hop the ComPort to a different ComController.
Status: current Access: read-write
OBJECT-TYPE    
  FrequencyKhz  

stuRecvRfSrEstimate 1.3.6.1.4.1.1141.3.3.1.1.4
Received Signal S/R estimate in dB on Rf Downstream. This value is an approximation in dB. Received value should be divided by 10 to get a fixed point representation. e.g., value 185 means 18.5 dB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stuRecvRfSigLevel 1.3.6.1.4.1.1141.3.3.1.1.5
Received Signal Level in dBmv on Rf Downstream.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stuOutOfSpecRFCond 1.3.6.1.4.1.1141.4.117
This trap is generated whenever an ComPort is acquired with out of spec signal quality condition. The trap trap is issued after the GO-SET-DONE message.
Status: current Access: read-only
NOTIFICATION-TYPE    

stuXmitOffset 1.3.6.1.4.1.1141.3.3.1.1.6
Specifies the transmit offset of the ComPort.
Status: current Access: read-only
OBJECT-TYPE    
  Offset  

stuXmitDacVRef 1.3.6.1.4.1.1141.3.3.1.1.7
Specifies the upstream RF DAC Voltage Reference. This value is set only via a GO_SET message under the control of the RX card.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..4294967295  

stuRecvFreqDrift 1.3.6.1.4.1.1141.3.3.1.1.8
Frequency shift (+/- 250Khz) from Downstream Frequency.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -250..250  

com21StuAlarmTable 1.3.6.1.4.1.1141.3.4.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StuAlarmEntry

com21StuAlarmEntry 1.3.6.1.4.1.1141.3.4.1.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  StuAlarmEntry  

stuAlmMacAddress 1.3.6.1.4.1.1141.3.4.1.1.1
Contains IEEE 802 medium access control address of the ComPort device.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

stuAlmTime 1.3.6.1.4.1.1141.3.4.1.1.2
Specifies the time the alarm condition was detected.
Status: current Access: read-only
OBJECT-TYPE    
  EpochTime  

stuAlmTrapId 1.3.6.1.4.1.1141.3.4.1.1.3
Specifies the trap number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 100..200  

stuAlmSeverity 1.3.6.1.4.1.1141.3.4.1.1.4
Specifies the alarm severity.
Status: current Access: read-only
OBJECT-TYPE    
  AlarmSeverity  

com21StuAlarmSevTable 1.3.6.1.4.1.1141.3.12.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StuAlarmSevEntry

com21StuAlarmSevEntry 1.3.6.1.4.1.1141.3.12.1.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  StuAlarmSevEntry  

stuAlmSevMacAddress 1.3.6.1.4.1.1141.3.12.1.1.1
Contains IEEE 802 medium access control address of the ComPort device.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

stuAlmSevCrcThres 1.3.6.1.4.1.1141.3.12.1.1.2
Specifies the CRC Error Threshold alarm severity. Default Minor.
Status: current Access: read-write
OBJECT-TYPE    
  AlarmSeverity  

stuAlmSevTeiThres 1.3.6.1.4.1.1141.3.12.1.1.3
Specifies the TEI Threshold alarm severity. Default Minor.
Status: current Access: read-write
OBJECT-TYPE    
  AlarmSeverity  

stuAlmSevHecThres 1.3.6.1.4.1.1141.3.12.1.1.4
Specifies the HEC Error Threshold alarm severity. Default Minor.
Status: current Access: read-write
OBJECT-TYPE    
  AlarmSeverity  

stuAlmSevEsThres 1.3.6.1.4.1.1141.3.12.1.1.5
Specifies the Errored Seconds Threshold alarm severity. Default Minor.
Status: current Access: read-write
OBJECT-TYPE    
  AlarmSeverity  

stuAlmSevFecThres 1.3.6.1.4.1.1141.3.12.1.1.6
Specifies the Corrected FEC Threshold alarm severity. Default Minor.
Status: current Access: read-write
OBJECT-TYPE    
  AlarmSeverity  

com21StuEtherConfigTable 1.3.6.1.4.1.1141.3.5.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StuEtherConfigEntry

com21StuEtherConfigEntry 1.3.6.1.4.1.1141.3.5.1.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  StuEtherConfigEntry  

stuEthMacAddress 1.3.6.1.4.1.1141.3.5.1.1.1
Contains IEEE 802 medium access control address of the ComPort device. Held on ComController.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

stuEtherFiltFlushAction 1.3.6.1.4.1.1141.3.5.1.1.2
Controls the flush operations.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), flushMac(2), flushEtherType(3), flushIp(4)  

stuEtherForwArpOnly 1.3.6.1.4.1.1141.3.5.1.1.3
If enable state then only ARP broadcast packets are forwarded upstream. Default is disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

stuEtherMacFiltAge 1.3.6.1.4.1.1141.3.5.1.1.4
Specifies the number of seconds that a learned MAC Address entry survives since last learning.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

stuEtherBCastRateEn 1.3.6.1.4.1.1141.3.5.1.1.5
Enable rate control. Default is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

stuEtherBCastRateCo 1.3.6.1.4.1.1141.3.5.1.1.6
Limit of maximum number of broadcast packets per second allowed upstream.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

stuEtherStickyBitCtrl 1.3.6.1.4.1.1141.3.5.1.1.7
When the Sticky Bit control is enabled, a MAC table entry will not be replaced by another MAC address for at least one aging period. Default disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

stuEther8021QEnable 1.3.6.1.4.1.1141.3.5.1.1.8
Enables both 802.1Q priority queuing and the filter of 802.1Q format packets. Default disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

stuEtherNonSnapRej 1.3.6.1.4.1.1141.3.5.1.1.9
This attribute controls the filtering of 802.2 non- SNAP encoded packets. Ethernet type filtering must be enabled to activate this feature. Default disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

stuEtherIgmpEnable 1.3.6.1.4.1.1141.3.5.1.1.10
This attribute controls the forwarding of IGMP multicast traffic upstream. This attribute will override any other multicast filtering in the case of IGMP packets. Default is enable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

stuEtherNonIpMultiEn 1.3.6.1.4.1.1141.3.5.1.1.11
This attribute controls the forwarding of non-IP multicast traffic upstream. This attribute will override any other multicast filtering in the case of non-IP multicast packets. Default is enable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

stuEtherBcmpOnly 1.3.6.1.4.1.1141.3.5.1.1.12
When this attribute is enabled, all non-BCMP traffic will be rejected in both the upstream and downstream. This attribute is utilized in a Spannong Tree implementation. Default is disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

stuEtherIgmpSnoopEnable 1.3.6.1.4.1.1141.3.5.1.1.13
This attribute controls the snooping of IGMP multicast traffic upstream. Default is disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

com21StuEtherTypeTable 1.3.6.1.4.1.1141.3.6.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StuFiltEthTypeEntry

com21StuFiltEthTypeEntry 1.3.6.1.4.1.1141.3.6.1.1
Holds Ethernet Types codes that are to be passed upstream. Maximum of 6 entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  StuFiltEthTypeEntry  

stuFiltEtherMacAddr 1.3.6.1.4.1.1141.3.6.1.1.1
Contains IEEE 802 medium access control address of the ComPort device. Held on ComController.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

stuFiltEtherType 1.3.6.1.4.1.1141.3.6.1.1.2
Holds Ethernet Type codes that is to be passed upstream. Held on ComPort.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

stuFiltEtherStatus 1.3.6.1.4.1.1141.3.6.1.1.3
This attribute is used to create or delete Ethernet Type entry.
Status: current Access: read-create
OBJECT-TYPE    
  Com21RowStatus  

com21StuFiltIpMultiTable 1.3.6.1.4.1.1141.3.7.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StuFiltIpMultiEntry

com21StuFiltIpMultiEntry 1.3.6.1.4.1.1141.3.7.1.1
Holds IP Multicast Addresses that are to be allowed in either upstream, or downstream, or both directions. Maximum of 16 entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  StuFiltIpMultiEntry  

stuFiltIpMacAddr 1.3.6.1.4.1.1141.3.7.1.1.1
Contains IEEE 802 medium access control address of the ComPort device. Held on ComController.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

stuFiltIpMultiAddr 1.3.6.1.4.1.1141.3.7.1.1.2
Holds Multicast Address. Held on ComPort. Valid values are within the range of MAC addresses of 01.00.5E.00.00.00 to 01.00.5E.7F.FF.FF
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

stuFiltIpMultiStatus 1.3.6.1.4.1.1141.3.7.1.1.3
Used to delete or create an entry.
Status: current Access: read-create
OBJECT-TYPE    
  Com21RowStatus  

stuFiltIpDirectCntrl 1.3.6.1.4.1.1141.3.7.1.1.4
Used to control the filter direction. Default is bothDirections.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER upstreamOnly(1), downstreamOnly(2), bothDirections(3)  

com21StuEtherMacTable 1.3.6.1.4.1.1141.3.8.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StuEtherMacEntry

com21StuEtherMacEntry 1.3.6.1.4.1.1141.3.8.1.1
Holds Ethernet MAC address that are to be processed as specified. Maximum of 8 entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  StuEtherMacEntry  

stuEtherStuMac 1.3.6.1.4.1.1141.3.8.1.1.1
Contains IEEE 802 medium access control address of the ComPort device. Held on ComController.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

stuEtherMacAddr 1.3.6.1.4.1.1141.3.8.1.1.2
Holds MAC address. Held on ComPort.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

stuEtherMacType 1.3.6.1.4.1.1141.3.8.1.1.3
Holds action to be performed upon packets of the specified MAC address. In the case of the learned MAC address, this entry becomes read only. Held on ComPort.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER learned(1), processor(2), upstream(3), reject(4)  

stuEtherMacStatus 1.3.6.1.4.1.1141.3.8.1.1.4
Used to create or delete an entry.
Status: current Access: read-create
OBJECT-TYPE    
  Com21RowStatus  

com21StuEtherStatsTable 1.3.6.1.4.1.1141.3.9.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StuEtherStatsEntry

com21StuEtherStatsEntry 1.3.6.1.4.1.1141.3.9.1.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  StuEtherStatsEntry  

stuEthStatsMacAddr 1.3.6.1.4.1.1141.3.9.1.1.1
Contains IEEE 802 medium access control address of the ComPort device. Held on ComController.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

stuCurrEtherRunts 1.3.6.1.4.1.1141.3.9.1.1.2
Contains number of runt packets received by the ComPort in the current 15minute period. This data is held on the ComPort.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuCurrEtherCollitns 1.3.6.1.4.1.1141.3.9.1.1.3
Contains number of collisions detected by the ComPort in the current 15minute period. This data is held on the ComPort.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuCurrEtherFramErrs 1.3.6.1.4.1.1141.3.9.1.1.4
Contains number of Ethernet Packets with Framing Errors detected by the ComPort in the current 15minute period. This data is held on the ComPort.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuCurrEtherCrcErrs 1.3.6.1.4.1.1141.3.9.1.1.5
Contains number of Ethernet Packets with CRC Errors detected by the ComPort in the current 15minute period. This data is held on the ComPort.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuCurrEtherCrcThres 1.3.6.1.4.1.1141.3.9.1.1.6
contains 15minute error level at which a threshold trap shall be generated. This is mapped to theComPort alarm severity entry stuThresholdLevel. Default is 0 - threshold disabled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

stuEtherCrcThres 1.3.6.1.4.1.1141.4.112
.
Status: current Access: read-write
NOTIFICATION-TYPE    

stuCurrEtherTxUnder 1.3.6.1.4.1.1141.3.9.1.1.7
Contains number of times Ethernet TX FIFO Underflow occurred on transmit queue in the current 15minute period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuCurrEtherRxOver 1.3.6.1.4.1.1141.3.9.1.1.8
Contains number of times Ethernet RX FIFO Overflow occurred on a receive queue in the current 15minute period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuCurrEtherDropFrms 1.3.6.1.4.1.1141.3.9.1.1.9
Contains number of receive frames dropped by MACE controller in the current 15minute period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuPrevEtherRunts 1.3.6.1.4.1.1141.3.9.1.1.10
Contains number of runt packets received by the ComPort in the previous 15minute period. This data is held on the ComPort.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuPrevEtherCollitns 1.3.6.1.4.1.1141.3.9.1.1.11
Contains number of collisions detected by the ComPort in the previous 15minute period. This data is held on the ComPort.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuPrevEtherFramErrs 1.3.6.1.4.1.1141.3.9.1.1.12
Contains number of Ethernet Packets with Framing Errors detected by the ComPort in the previous 15minute period. This data is held on the ComPort.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuPrevEtherCrcErrs 1.3.6.1.4.1.1141.3.9.1.1.13
Contains number of Ethernet Packets with CRC Errors detected by the ComPort in the previous 15minute period. This data is held on the ComPort.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuPrevEtherTxUnder 1.3.6.1.4.1.1141.3.9.1.1.14
Contains number of times Ethernet TX FIFO Underflow occurred on transmit queue in the previous 15minute period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuPrevEtherRxOver 1.3.6.1.4.1.1141.3.9.1.1.15
Contains number of times Ethernet RX FIFO Overflow occurred on a receive queue in the previous 15minute period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuPrevEtherDropFrms 1.3.6.1.4.1.1141.3.9.1.1.16
Contains number of receive frames dropped by MACE controller in the previous 15minute period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuEtherConnState 1.3.6.1.4.1.1141.3.9.1.1.17
Contains state of Ethernet connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unint(1), is(2), oos(3)  

stuEtherClearStats 1.3.6.1.4.1.1141.3.9.1.1.18
This attribute is used to clear all Ethernet statistics counters in this group. This operation is only possible if the hcxStatsControl attribute is set to wrapCurr.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER nil(1), clear(2)  

com21StuStatsTable 1.3.6.1.4.1.1141.3.10.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StuStatsEntry

com21StuStatsEntry 1.3.6.1.4.1.1141.3.10.1.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  StuStatsEntry  

stuStatsMacAddress 1.3.6.1.4.1.1141.3.10.1.1.1
Contains IEEE 802 medium access control address of the ComPort device. Held on ComController.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

stuStatsCurrAtmTei 1.3.6.1.4.1.1141.3.10.1.1.2
Number of cells received with transport errors - uncorrectable FEC or HEC errors - in the current 15minute period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuAtmTeiThreshold 1.3.6.1.4.1.1141.3.10.1.1.3
contains 15minute transport error level at which a threshold trap shall be generated. Default is 0 - threshold disabled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

stuAtmTeiThres 1.3.6.1.4.1.1141.4.113
.
Status: current Access: read-write
NOTIFICATION-TYPE    

stuStatsCurrAtmHec 1.3.6.1.4.1.1141.3.10.1.1.4
Number of cells received with HEC or Encryption errors in the current 15minute period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuAtmHecThreshold 1.3.6.1.4.1.1141.3.10.1.1.5
contains 15minute HEC error level at which a threshold trap shall be generated. Default is 0 - threshold disabled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

stuAtmHecThres 1.3.6.1.4.1.1141.4.114
.
Status: current Access: read-write
NOTIFICATION-TYPE    

stuStatsCurrESMin 1.3.6.1.4.1.1141.3.10.1.1.6
Represents the number of errored seconds in the current 15 minute period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuESMinThreshold 1.3.6.1.4.1.1141.3.10.1.1.7
contains 15minute errored seconds level at which a threshold trap shall be generated. Default is 0 - threshold disabled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

stuESMinThres 1.3.6.1.4.1.1141.4.115
.
Status: current Access: read-write
NOTIFICATION-TYPE    

stuStatsCurrFecCorrect 1.3.6.1.4.1.1141.3.10.1.1.8
Fecs corrected by Demodulator on Downstream in the current 15 minute period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuFecCorrectThreshold 1.3.6.1.4.1.1141.3.10.1.1.9
contains 15minute Fecs corrected level at which a threshold trap shall be generated. Default is 0 - threshold disabled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

stuFecCorrectThres 1.3.6.1.4.1.1141.4.116
.
Status: current Access: read-write
NOTIFICATION-TYPE    

stuStatsCurrUASMin 1.3.6.1.4.1.1141.3.10.1.1.10
Represents the number of unavailable seconds in the current 15 minute period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuStatsPrevAtmTei 1.3.6.1.4.1.1141.3.10.1.1.11
Number of cells received with transport errors - HEC or uncorrectable FEC errors - in the previous 15minute period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuStatsPrevAtmHec 1.3.6.1.4.1.1141.3.10.1.1.12
Number of cells received with HEC or Encryption errors in the previous 15minute period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuStatsPrevESMin 1.3.6.1.4.1.1141.3.10.1.1.13
Represents the number of errored seconds in the previous 15 minute period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuStatsPrevFecCorrect 1.3.6.1.4.1.1141.3.10.1.1.14
Fecs corrected by Demodulator on Downstream in the previous 15 minute period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuStatsPrevUASMin 1.3.6.1.4.1.1141.3.10.1.1.15
Represents the number of unavailable seconds in the previous 15 minute period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuStatsClearStats 1.3.6.1.4.1.1141.3.10.1.1.16
This attribute is used to clear the all ComPort statistics counters in this group. This operation is only possible if the hcxStatsControl attribute is set to wrapCurr.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER nil(1), clear(2)  

com21StuQStatsTable 1.3.6.1.4.1.1141.3.11.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StuQStatsEntry

com21StuQStatsEntry 1.3.6.1.4.1.1141.3.11.1.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  StuQStatsEntry  

stuAtmStuMacAddr 1.3.6.1.4.1.1141.3.11.1.1.1
Contains IEEE 802 medium access control address of the ComPort device. Held on ComController.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

stuAtmStuQNo 1.3.6.1.4.1.1141.3.11.1.1.2
This index consists of a number representing a Mongoose queue. For initial phase this number shall equal the associated VCI number. i.e. Ethernet or Telephony VCIs. This VCI number shall be mapped to a Mongoose queue id by the ComController. For 3.0 there is only a single Ethernet queue - queue 5.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stuAtmStatsCurrMinRx 1.3.6.1.4.1.1141.3.11.1.1.3
Represents the number of cells or frames successfully received in the current 15 minute period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuAtmStatsCurrMinRxDropped 1.3.6.1.4.1.1141.3.11.1.1.4
Represents the number of cells or frames dropped in the current 15 minute period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuAtmStatsCurrMinCRCErrors 1.3.6.1.4.1.1141.3.11.1.1.5
Represents the number of cells or frames received with CRC errors in the current 15 minute period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuAtmStatsPrevMinRx 1.3.6.1.4.1.1141.3.11.1.1.6
Represents the number of cells or frames successfully received in the previous 15 minute period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuAtmStatsPrevMinRxDropped 1.3.6.1.4.1.1141.3.11.1.1.7
Represents the number of cells or frames dropped in the previous 15 minute period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuAtmStatsPrevMinCRCErrors 1.3.6.1.4.1.1141.3.11.1.1.8
Represents the number of cells or frames received with CRC errors in the previous 15 minute period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

stuAtmStatsClearStats 1.3.6.1.4.1.1141.3.11.1.1.9
This attribute is used to clear the ComPort queue statistics counters in this group. This operation is only possible if the hcxStatsControl attribute is set to wrapCurr.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER nil(1), clear(2)  

com21StuCodeImageTable 1.3.6.1.4.1.1141.3.13.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StuCodeImageEntry

com21StuCodeImageEntry 1.3.6.1.4.1.1141.3.13.1.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  StuCodeImageEntry  

stuCodeStuMacAddr 1.3.6.1.4.1.1141.3.13.1.1.1
Contains IEEE 802 medium access control address of the ComPort device. Held on ComController.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

stuCodeImageIndex 1.3.6.1.4.1.1141.3.13.1.1.2
Index to receive information about various images; VxWorks - operating system. ApplicationStu - Image comprising Stu Application, DownloadImage - Image downloaded into DRAM.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER vxWorksImage(1), applicationStu(2), downloadImage(3)  

stuCodeImageType 1.3.6.1.4.1.1141.3.13.1.1.3
Code image identifier. vxWorks - boot code and OS, boot memory resident, stuBoot - backup application image, boot memory resident, stuNewapp - primary application image, app memory resident, stuDnld - downloaded application supplement (optional), updateApp - downloaded flash update, updates app flash, updateBoth - downloaded flash update, updates boot+app flash.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER stuBoot(1), reserved1(2), stuNewapp(3), stuDnld(4), updateApp(5), reserved2(6), reserved3(7), reserved4(8), updateBoth(9), reserved5(10), vxWorks(11)  

stuCodeImageVersion 1.3.6.1.4.1.1141.3.13.1.1.4
Version Description for the Code Image.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(40)  

stuCodeImageBuildDir 1.3.6.1.4.1.1141.3.13.1.1.5
Directory name where image was built.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(80)  

stuCodeImageDate 1.3.6.1.4.1.1141.3.13.1.1.6
Date when the image is built.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(12)  

stuCodeImageTime 1.3.6.1.4.1.1141.3.13.1.1.7
Time when the image is built.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(9)  

com21StuVoiceChanStatsTable 1.3.6.1.4.1.1141.3.14.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StuVoiceChanStatsEntry

com21StuVoiceChanStatsEntry 1.3.6.1.4.1.1141.3.14.1.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  StuVoiceChanStatsEntry  

stuVoiceChanStatsMacAddr 1.3.6.1.4.1.1141.3.14.1.1.1
Contains IEEE 802 medium access control address of the ComPort device.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

stuVoiceChanStatsNum 1.3.6.1.4.1.1141.3.14.1.1.2
Defines the voice port on the Comport device used for Voice.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2  

stuVoiceChanStatsCurrLostCellCnt 1.3.6.1.4.1.1141.3.14.1.1.3
Defines the number of times the Comport's voice port received Cells out of sequence in the current 15-min period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stuVoiceChanStatsCurrDrpdCellCnt 1.3.6.1.4.1.1141.3.14.1.1.4
Defines the number of times the Comport's voice port dropped cells due to Queue Full in the current 15-min period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stuVoiceChanStatsCurrCrc3ErrCnt 1.3.6.1.4.1.1141.3.14.1.1.5
Defines the number of cells Comport's voice port received with CRC3 Errors in the current 15-min period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stuVoiceChanStatsCurrSetUpFailCnt 1.3.6.1.4.1.1141.3.14.1.1.6
Defines the number of times the Comport's voice port had to drop the calls due to Call Setup Failure in the current 15-min period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stuVoiceChanStatsCurrTxVoiceCellCnt 1.3.6.1.4.1.1141.3.14.1.1.7
Defines the number of Voice cells Comport's voice port Queued to Transmit in the current 15-min period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stuVoiceChanStatsCurrRxVoiceCellCnt 1.3.6.1.4.1.1141.3.14.1.1.8
Defines the number of Voice cells the Comport's voice port received in the current 15-min period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stuVoiceChanStatsCurrTxOamCellCnt 1.3.6.1.4.1.1141.3.14.1.1.9
Defines the number of OAM cells Comport's voice port Queued to Transmit in the current 15-min period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stuVoiceChanStatsCurrRxOamCellCnt 1.3.6.1.4.1.1141.3.14.1.1.10
Defines the number of OAM cells the Comport's voice port received in the current 15-min period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stuVoiceChanStatsPrevLostCellCnt 1.3.6.1.4.1.1141.3.14.1.1.11
Defines the number of times the Comport's voice port received Cells out of sequence in the previous 15-min period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stuVoiceChanStatsPrevDrpdCellCnt 1.3.6.1.4.1.1141.3.14.1.1.12
Defines the number of times the Comport's voice port dropped cells due to Queue Full in the previous 15-min period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stuVoiceChanStatsPrevCrc3ErrCnt 1.3.6.1.4.1.1141.3.14.1.1.13
Defines the number of cells Comport's voice port received with CRC3 Errors in the previous 15-min period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stuVoiceChanStatsPrevSetUpFailCnt 1.3.6.1.4.1.1141.3.14.1.1.14
Defines the number of times the Comport's voice port had to drop the calls due to Call Setup Failure in the previous 15-min period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stuVoiceChanStatsPrevTxVoiceCellCnt 1.3.6.1.4.1.1141.3.14.1.1.15
Defines the number of Voice cells Comport's voice port Tranmitted in the previous 15-min period
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stuVoiceChanStatsPrevRxVoiceCellCnt 1.3.6.1.4.1.1141.3.14.1.1.16
Defines the number of times the Comport's voice port received Cells out of sequence in the previous 15-min period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stuVoiceChanStatsPrevTxOamCellCnt 1.3.6.1.4.1.1141.3.14.1.1.17
Defines the number of times the Comport's voice port received Cells out of sequence in the previous 15-min period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stuVoiceChanStatsPrevRxOamCellCnt 1.3.6.1.4.1.1141.3.14.1.1.18
Defines the number of times the Comport's voice port received Cells out of sequence in the previous 15-min period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stuVoiceChanStatsClear 1.3.6.1.4.1.1141.3.14.1.1.19
Provides the capability to clear the statistics. Clearing of statistics allowed only if hcxStatsControl attribute is set to wrapCurr.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER nil(1), clear(2)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor