Dell-UDLD-MIB
File:
Dell-UDLD-MIB.mib (9191 bytes)
Imported modules
Imported symbols
Defined Types
UdldPortBidirectionalState |
|
Port UDLD current status (shutdown, idle, detection, undetermined, bidirectional). |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
shutdown(1), idle(2), detection(3), undetermined(4), bidirectional(5) |
|
UdldNeighborCurrentState |
|
Port UDLD Neighbor current status (Disabled, Enabled, Undefined, Bidirectional). |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
disabled(1), enabled(2), undefined(3), bidirectional(4) |
|
UdldGlobalMode |
|
Global (fiber) Port UDLD curent status (normal, aggressive, disabled). |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
normal(1), aggressive(2), disabled(3) |
|
UdldPortMode |
|
Port UDLD curent status (normal, aggressive, disabled, default). |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
normal(1), aggressive(2), disabled(3), default(4) |
|
RlUdldPortEntry |
|
SEQUENCE |
|
|
|
|
rlUdldPortIfIndex |
InterfaceIndex |
|
|
rlUdldPortAdminMode |
UdldPortMode |
|
|
rlUdldPortOperMode |
UdldPortMode |
|
|
rlUdldPortDefaultConfiguration |
TruthValue |
|
|
rlUdldBidirectionalState |
UdldPortBidirectionalState |
|
|
rlUdldNumberOfDetectedNeighbors |
INTEGER |
|
RlUdldNeighborEntry |
|
SEQUENCE |
|
|
|
|
rlUdldNeighborPortIfIndex |
InterfaceIndex |
|
|
rlUdldNeighborDeviceID |
UdldString |
|
|
rlUdldNeighborPortID |
UdldString |
|
|
rlUdldNeighborDeviceMACAddress |
MacAddress |
|
|
rlUdldNeighborDeviceName |
UdldString |
|
|
rlUdldNeighborMessageTime |
INTEGER |
|
|
rlUdldNeighborLeftLifeTime |
INTEGER |
|
|
rlUdldNeighborCurrentState |
UdldNeighborCurrentState |
|
Defined Values
rlUdld |
1.3.6.1.4.1.89.218 |
This private MIB module for UDLD (Cisco Systems UniDirectional Link Detection Protocol). |
MODULE-IDENTITY |
|
|
|
rlUdldPortTable |
1.3.6.1.4.1.89.218.1 |
The table holds information for Udld Ethernet ports. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
RlUdldPortEntry |
|
rlUdldPortEntry |
1.3.6.1.4.1.89.218.1.1 |
Entry in the rlUdldPortTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RlUdldPortEntry |
|
|
rlUdldPortIfIndex |
1.3.6.1.4.1.89.218.1.1.1 |
Interface Index. This variable is the key for udld port table.
uniquely identifies the udld port information. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
InterfaceIndex |
|
|
rlUdldPortAdminMode |
1.3.6.1.4.1.89.218.1.1.2 |
This variable identifies port UDLD admin configured mode (normal, aggressive, disable). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
UdldPortMode |
|
|
rlUdldPortOperMode |
1.3.6.1.4.1.89.218.1.1.3 |
This variable identifies port UDLD operational mode (normal, aggressive, disable).
for fiber ports it is combination of global mode and port mode |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
UdldPortMode |
|
|
rlUdldPortDefaultConfiguration |
1.3.6.1.4.1.89.218.1.1.4 |
This variable indicates whether tne user configure the udld port. to present (default) or not in port configuration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
rlUdldNeighborEntry |
1.3.6.1.4.1.89.218.2.1 |
Entry in the rlUdldNeighborTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RlUdldNeighborEntry |
|
|
rlUdldNeighborPortIfIndex |
1.3.6.1.4.1.89.218.2.1.1 |
Interface Index. This variable is the key for udld port Neighbor table.
uniquely identifies the udld port index. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
InterfaceIndex |
|
|
rlUdldNeighborDeviceID |
1.3.6.1.4.1.89.218.2.1.2 |
The Neighbor Device-ID TLV should contain the switch base MAC address in ACSII format. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
UdldString |
|
|
rlUdldNeighborPortID |
1.3.6.1.4.1.89.218.2.1.3 |
The Port-ID TLV should contain the port ACSII name as it is printed in show CLI commands. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
UdldString |
|
|
rlUdldNeighborDeviceName |
1.3.6.1.4.1.89.218.2.1.5 |
The Neighbor NeighborDevice Name TLV should contain sysName in ACSII. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
UdldString |
|
|
rlUdldNeighborMessageTime |
1.3.6.1.4.1.89.218.2.1.6 |
The Neighbor Message Time is from Message Interval TLV.
This time interval value used by a neighbor to send UDLD probes
after the linkup or detection phases. Its time unit is 1 second. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlUdldNeighborLeftLifeTime |
1.3.6.1.4.1.89.218.2.1.7 |
The remaining holdtime for Neighbor entry in cache in seconds. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlUdldGlobalMessageTime |
1.3.6.1.4.1.89.218.4 |
Define global value of the interval between two sent probe messages, use the udld
message time command in Global Configuration mode. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|