HPN-ICF-LswINF-MIB

File: HPN-ICF-LswINF-MIB.mib (67701 bytes)

Imported modules

SNMPv2-TC	SNMPv2-SMI	IF-MIB
HPN-ICF-OID-MIB

Imported symbols

RowStatus	DisplayString	TruthValue
TEXTUAL-CONVENTION	MODULE-IDENTITY	OBJECT-TYPE
Integer32	Counter64	Unsigned32
ifIndex	InterfaceIndex	hpnicflswCommon

Defined Types

PortList
Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
TEXTUAL-CONVENTION
	OCTET STRING

VlanIndex
A value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see VlanId textual convention). If the value is greater than 4095 then it represents a VLAN with scope local to the particular agent, i.e. one without a global VLAN-ID assigned to it. Such VLANs are outside the scope of IEEE 802.1Q but it is convenient to be able to manage them in the same way using this MIB.
TEXTUAL-CONVENTION
	Unsigned32	0..4294967295

DropDirection
Representing the direction of dropping packets, if applicable.
TEXTUAL-CONVENTION
	INTEGER	disable(1), enableInbound(2), enableOutbound(3), enableBoth(4)

SpeedModeFlag
Type of Negotiable Speed mode.
TEXTUAL-CONVENTION
	BITS	s10M(0), s100M(1), s1000M(2), s10000M(3), s24000M(4), s40000M(5), s100000M(6)

HpnicfIfXXEntry
SEQUENCE
	hpnicfifUnBoundPort	TruthValue
	hpnicfifISPhyPort	TruthValue
	hpnicfifAggregatePort	TruthValue
	hpnicfifMirrorPort	TruthValue
	hpnicfifVLANType	INTEGER
	hpnicfifMcastControl	INTEGER
	hpnicfifFlowControl	TruthValue
	hpnicfifSrcMacControl	TruthValue
	hpnicfifClearStat	INTEGER
	hpnicfifXXBasePortIndex	INTEGER
	hpnicfifXXDevPortIndex	INTEGER
	hpnicfifPpsMcastControl	Integer32
	hpnicfifPpsBcastDisValControl	INTEGER
	hpnicfifUniSuppressionStep	Integer32
	hpnicfifPpsUniSuppressionMax	Integer32
	hpnicfifMulSuppressionStep	Integer32
	hpnicfifPpsMulSuppressionMax	Integer32
	hpnicfifUniSuppression	Integer32
	hpnicfifPpsUniSuppression	Integer32
	hpnicfifMulSuppression	Integer32
	hpnicfifPpsMulSuppression	Integer32
	hpnicfifComboActivePort	INTEGER
	hpnicfifBMbpsMulSuppressionMax	Integer32
	hpnicfifBMbpsMulSuppression	Integer32
	hpnicfifBKbpsMulSuppressionMax	Integer32
	hpnicfifBKbpsMulSuppressionStep	Integer32
	hpnicfifBKbpsMulSuppression	Integer32
	hpnicfifUnknownPacketDropMul	DropDirection
	hpnicfifUnknownPacketDropUni	DropDirection
	hpnicfifBMbpsUniSuppressionMax	Integer32
	hpnicfifBMbpsUniSuppression	Integer32
	hpnicfifBKbpsUniSuppressionMax	Integer32
	hpnicfifBKbpsUniSuppressionStep	Integer32
	hpnicfifBKbpsUniSuppression	Integer32
	hpnicfifOutPayloadOctets	Counter64
	hpnicfifInPayloadOctets	Counter64
	hpnicfifInErrorPktsRate	Integer32
	hpnicfifInPkts	Counter64
	hpnicfifInNormalPkts	Counter64
	hpnicfifOutPkts	Counter64

HpnicfIfAggregateEntry
SEQUENCE
	hpnicfifAggregatePortIndex	InterfaceIndex
	hpnicfifAggregatePortName	OCTET STRING
	hpnicfifAggregatePortListPorts	PortList
	hpnicfifAggregateModel	INTEGER
	hpnicfifAggregateOperStatus	RowStatus

HpnicfifHybridPortEntry
SEQUENCE
	hpnicfifHybridPortIndex	INTEGER
	hpnicfifHybridTaggedVlanListLow	OCTET STRING
	hpnicfifHybridTaggedVlanListHigh	OCTET STRING
	hpnicfifHybridUnTaggedVlanListLow	OCTET STRING
	hpnicfifHybridUnTaggedVlanListHigh	OCTET STRING

HpnicfifComboPortEntry
SEQUENCE
	hpnicfifComboPortIndex	InterfaceIndex
	hpnicfifComboPortCurActive	INTEGER

HpnicfifPktBufEntry
SEQUENCE
	hpnicfifPktBufFree	Integer32
	hpnicfifPktBufInit	Integer32
	hpnicfifPktBufMin	Integer32
	hpnicfifPktBufMiss	Counter64

HpnicfIfVLANTrunkStatusEntry
SEQUENCE
	hpnicfifVLANTrunkIndex	InterfaceIndex
	hpnicfifVLANTrunkGvrpRegistration	INTEGER
	hpnicfifVLANTrunkPassListLow	OCTET STRING
	hpnicfifVLANTrunkPassListHigh	OCTET STRING
	hpnicfifVLANTrunkAllowListLow	OCTET STRING
	hpnicfifVLANTrunkAllowListHigh	OCTET STRING

HpnicfEthernetEntry
SEQUENCE
	hpnicfifEthernetDuplex	INTEGER
	hpnicfifEthernetMTU	INTEGER
	hpnicfifEthernetSpeed	INTEGER
	hpnicfifEthernetMdi	INTEGER
	hpnicfMaxMacLearn	INTEGER
	hpnicfifMacAddressLearn	INTEGER
	hpnicfifEthernetTest	INTEGER
	hpnicfifMacAddrLearnMode	INTEGER
	hpnicfifEthernetFlowInterval	INTEGER
	hpnicfifEthernetIsolate	OCTET STRING
	hpnicfifVlanVPNStatus	INTEGER
	hpnicfifVlanVPNUplinkStatus	INTEGER
	hpnicfifVlanVPNTPID	Integer32
	hpnicfifIsolateGroupID	Integer32
	hpnicfifisUplinkPort	INTEGER
	hpnicfifEthernetAutoSpeedMask	SpeedModeFlag
	hpnicfifEthernetAutoSpeed	SpeedModeFlag

HpnicfPortIsolateGroupEntry
SEQUENCE
	hpnicfPortIsolateGroupIndex	Integer32
	hpnicfPortIsolateUplinkIfIndex	InterfaceIndex
	hpnicfPortIsolateGroupRowStatus	RowStatus
	hpnicfPortIsolateGroupDescription	DisplayString

HpnicfifPortProtocolStatEntry
SEQUENCE
	hpnicfifIPv4InOctets	Counter64
	hpnicfifIPv4InUcastPkts	Counter64
	hpnicfifIPv4InMultiPkts	Counter64
	hpnicfifIPv4InBroadcastPkts	Counter64
	hpnicfifIPv4InDiscards	Counter64
	hpnicfifIPv4InErrors	Counter64
	hpnicfifIPv4OutOctets	Counter64
	hpnicfifIPv4OutUcastPkts	Counter64
	hpnicfifIPv4OutMultiPkts	Counter64
	hpnicfifIPv4OutBroadcastPkts	Counter64
	hpnicfifIPv4OutDiscards	Counter64
	hpnicfifIPv4OutErrors	Counter64
	hpnicfifIPv6InOctets	Counter64
	hpnicfifIPv6InUcastPkts	Counter64
	hpnicfifIPv6InMultiPkts	Counter64
	hpnicfifIPv6InAnycastPkts	Counter64
	hpnicfifIPv6InDiscards	Counter64
	hpnicfifIPv6InErrors	Counter64
	hpnicfifIPv6OutOctets	Counter64
	hpnicfifIPv6OutUcastPkts	Counter64
	hpnicfifIPv6OutMultiPkts	Counter64
	hpnicfifIPv6OutAnycastPkts	Counter64
	hpnicfifIPv6OutDiscards	Counter64
	hpnicfifIPv6OutErrors	Counter64

Defined Values

hpnicfLswL2InfMib		1.3.6.1.4.1.11.2.14.11.15.8.35.5
Tok_String
MODULE-IDENTITY

hpnicfLswExtInterface		1.3.6.1.4.1.11.2.14.11.15.8.35.1
OBJECT IDENTIFIER

hpnicfifXXTable		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1
Extended interface information table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfIfXXEntry

hpnicfifXXEntry		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1
Entries of extended interface information table.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfIfXXEntry

hpnicfifUnBoundPort		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.1
Whether it is the unbound port. (true indicates that the port is the main port of the aggregation or the port does not participate in the aggregation.)
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

hpnicfifISPhyPort		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.2
Whether it is a physical interface.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

hpnicfifAggregatePort		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.3
Whether it is the aggregated port. (if the port participates in the aggregation, this value is true.)
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

hpnicfifMirrorPort		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.4
Whether it is a mirror port.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

hpnicfifVLANType		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.5
port vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	vLANTrunk(1), access(2), hybrid(3), fabric(4)

hpnicfifMcastControl		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.6
Broadcast storm suppression with the step length of 1, ranging from 0 to 100 percent. In some products the step is 5, ranging from 0 to 100.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..100

hpnicfifFlowControl		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.7
Flow control status.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

hpnicfifSrcMacControl		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.8
Whether to filter by source MAC address.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

hpnicfifClearStat		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.9
Clear specify port statistics. Operation read is not supported.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	clear(1)

hpnicfifXXBasePortIndex		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.10
Index number of the port and the first port index of the device is 1.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

hpnicfifXXDevPortIndex		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.11
Device index of the port.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

hpnicfifPpsMcastControl		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.12
The broadcast suppression with pps(packet per second) type. The max value is determined by the port type and product.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hpnicfifPpsBcastDisValControl		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.13
Control the port's pps(packet per second) broadcast suppression. When the port is enabled, its pps broadcast suppression value is the global disperse value, and when disabled, it doesn't suppress broadcast.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hpnicfifUniSuppressionStep		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.14
The step of unicast suppression in ratio mode.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfifPpsUniSuppressionMax		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.15
The max pps(packet per second) value of unicast suppression in pps mode.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfifMulSuppressionStep		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.16
The step of multicast suppression in ratio mode.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfifPpsMulSuppressionMax		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.17
The max pps(packet per second) value of multicast suppression in pps mode.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfifUniSuppression		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.18
The unicast suppression with the ranging from 0 to 100 percent in ratio mode. The step is determined by hpnicfifUniSuppressionStep.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hpnicfifPpsUniSuppression		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.19
The unicast suppression in pps(packet per second) mode. The max value is determined by hpnicfifPpsUniSuppressionMax.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hpnicfifMulSuppression		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.20
The multicast suppression with ranging from 0 to 100 percent in ratio mode. The step is determined by hpnicfifMulSuppressionStep.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hpnicfifPpsMulSuppression		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.21
The multicast suppression in pps(packet per second) mode. The max pps value is determined by hpnicfifPpsMulSuppressionMax.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hpnicfifComboActivePort		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.22
Active port on combo interface.
Status: obsolete	Access: read-write
OBJECT-TYPE
	INTEGER	fiber(1), copper(2), na(3)

hpnicfifBMbpsMulSuppressionMax		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.23
The maximum value of the multicast suppression with bandwidth-based(Mbps) that a port can be configured.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfifBMbpsMulSuppression		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.24
With bandwidth-based multicast suppression, the bandwidth is measured in Mbps. The upper limit of the multicast suppession with bandwidth-based(Mbps) is the value of hpnicfifBMbpsMulSuppressionMax in the entry. The default value of hpnicfifBMbpsMulSuppression is the value of hpnicfifBMbpsMulSuppressionMax.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hpnicfifBKbpsMulSuppressionMax		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.25
The maximum value of the multicast suppression with bandwidth-based(Kbps) that a port can be configured.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfifBKbpsMulSuppressionStep		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.26
The step of multicast suppression with bandwidth-based(Kbps).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfifBKbpsMulSuppression		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.27
With bandwidth-based multicast suppression, the bandwidth is measured in Kbps. The upper limit of the multicast suppession with bandwidth-based(Kbps) is the value of hpnicfifBKbpsMulSuppressionMax in the entry. The value of hpnicfifBKbpsMulSuppression must be multiple of the value of hpnicfifBKbpsMulSuppressionStep. The default value of hpnicfifBKbpsMulSuppression is the value of hpnicfifBKbpsMulSuppressionMax.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hpnicfifUnknownPacketDropMul		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.28
Control the port's unknown-multicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-multicast packets in inbound direction. When outbound direction is enabled on this port, the port will drop unknown-multicast packets in outbound direction. When both directions are enabled on this port, the port will drop unknown-multicast packets in both inbound and outbound directions.
Status: current	Access: read-write
OBJECT-TYPE
	DropDirection

hpnicfifUnknownPacketDropUni		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.29
Control the port's unknown-unicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-unicast packets in inbound direction. When outbound direction is enabled on this port, the port will drop unknown-unicast packets in outbound direction. When both directions are enabled on this port, the port will drop unknown-unicast packets in both inbound and outbound directions.
Status: current	Access: read-write
OBJECT-TYPE
	DropDirection

hpnicfifBMbpsUniSuppressionMax		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.30
The maximum value of the unicast suppression with bandwidth-based (Mbps) that a port can be configured.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfifBMbpsUniSuppression		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.31
With bandwidth-based Unicast suppression, the bandwidth is measured in Mbps. The upper limit of the unicast suppession with bandwidth-based(Mbps) is the value of hpnicfifBMbpsUniSuppressionMax in the entry. The default value of hpnicfifBMbpsUniSuppression is the value of hpnicfifBMbpsUniSuppressionMax.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hpnicfifBKbpsUniSuppressionMax		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.32
The maximum value of the unicast suppression with bandwidth-based (Kbps) that a port can be configured.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfifBKbpsUniSuppressionStep		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.33
The step of unicast suppression with bandwidth-based(Kbps).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfifBKbpsUniSuppression		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.34
With bandwidth-based unicast suppression, the bandwidth is measured in Kbps. The upper limit of the unicast suppession with bandwidth-based(Kbps) is the value of hpnicfifBKbpsUniSuppressionMax in the entry. The value of hpnicfifBKbpsUniSuppression must be multiple of the value of hpnicfifBKbpsUniSuppressionStep. The default value of hpnicfifBKbpsUniSuppression is the value of hpnicfifBKbpsUniSuppressionMax.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hpnicfifOutPayloadOctets		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.35
The actual output octets of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifInPayloadOctets		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.36
The actual input octets of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifInErrorPktsRate		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.37
The rate of inbound error packets on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfifInPkts		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.38
The number of packets received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifInNormalPkts		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.39
The number of normal packets received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifOutPkts		1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.40
The number of packets sent on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifAggregateTable		1.3.6.1.4.1.11.2.14.11.15.8.35.1.2
Port aggregation information table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfIfAggregateEntry

hpnicfifAggregateEntry		1.3.6.1.4.1.11.2.14.11.15.8.35.1.2.1
Port aggregation information table.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfIfAggregateEntry

hpnicfifAggregatePortIndex		1.3.6.1.4.1.11.2.14.11.15.8.35.1.2.1.1
Index number of the main aggregated port.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndex

hpnicfifAggregatePortName		1.3.6.1.4.1.11.2.14.11.15.8.35.1.2.1.2
Aggregation group name.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..40)

hpnicfifAggregatePortListPorts		1.3.6.1.4.1.11.2.14.11.15.8.35.1.2.1.3
Portlist of a aggregating.
Status: current	Access: read-write
OBJECT-TYPE
	PortList

hpnicfifAggregateModel		1.3.6.1.4.1.11.2.14.11.15.8.35.1.2.1.4
Load sharing mode for the port aggregation.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	ingress(1), both(2), round-robin(3)

hpnicfifAggregateOperStatus		1.3.6.1.4.1.11.2.14.11.15.8.35.1.2.1.5
Current operation status of the row.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpnicfifHybridPortTable		1.3.6.1.4.1.11.2.14.11.15.8.35.1.3
Hybrid-port configuration table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfifHybridPortEntry

hpnicfifHybridPortEntry		1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1
Hybrid-port configuration table.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfifHybridPortEntry

hpnicfifHybridPortIndex		1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1.1
Index number of Hybrid-port.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

hpnicfifHybridTaggedVlanListLow		1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1.2
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each tagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is tagged in the set of VLANs; the VLAN is not tagged if its bit has a value of '0'.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hpnicfifHybridTaggedVlanListHigh		1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1.3
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each tagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is tagged in the set of VLANs; the VLAN is not tagged if its bit has a value of '0'.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hpnicfifHybridUnTaggedVlanListLow		1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1.4
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hpnicfifHybridUnTaggedVlanListHigh		1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1.5
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hpnicfifComboPortTable		1.3.6.1.4.1.11.2.14.11.15.8.35.1.4
Combo-port table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfifComboPortEntry

hpnicfifComboPortEntry		1.3.6.1.4.1.11.2.14.11.15.8.35.1.4.1
The entry of hpnicfifComboPortTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfifComboPortEntry

hpnicfifComboPortIndex		1.3.6.1.4.1.11.2.14.11.15.8.35.1.4.1.1
The combo-port interface index. Its value is the same as the value of ifIndex in ifTable, but only includes indexes of the combo-port interfaces.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndex

hpnicfifComboPortCurActive		1.3.6.1.4.1.11.2.14.11.15.8.35.1.4.1.2
Current active interface of combo interfaces. The value 'fiber' means the interface with fiber connector of the pair of combo-port interfaces is active. The value 'copper' means the interface with copper connector of the pair is active. The value 'na' means not supported.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	fiber(1), copper(2), na(3)

hpnicfifPktBufTable		1.3.6.1.4.1.11.2.14.11.15.8.35.1.5
Packet buffer table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfifPktBufEntry

hpnicfifPktBufEntry		1.3.6.1.4.1.11.2.14.11.15.8.35.1.5.1
The entry of hpnicfifPktBufTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfifPktBufEntry

hpnicfifPktBufFree		1.3.6.1.4.1.11.2.14.11.15.8.35.1.5.1.1
The number of packet buffers available for the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfifPktBufInit		1.3.6.1.4.1.11.2.14.11.15.8.35.1.5.1.2
The number of packet buffers allocated when the interface was created.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfifPktBufMin		1.3.6.1.4.1.11.2.14.11.15.8.35.1.5.1.3
The smallest number of packet buffers available for the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfifPktBufMiss		1.3.6.1.4.1.11.2.14.11.15.8.35.1.5.1.4
The number of times that the interface failed to obtain a packet buffer. Failure to obtain a buffer indicates that buffers were busy.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfLswL2InfMibObject		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1
OBJECT IDENTIFIER

hpnicfSlotPortMax		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.1
Max ports of the slots.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

hpnicfSwitchPortMax		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.2
Max ports that this switch includes.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

hpnicfifVLANTrunkStatusTable		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3
Gvrp attributes on the VlanTrunk port.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfIfVLANTrunkStatusEntry

hpnicfifVLANTrunkStatusEntry		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1
Gvrp attributes on the VlanTrunk port.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfIfVLANTrunkStatusEntry

hpnicfifVLANTrunkIndex		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.1
Index number of the VLANTrunk interface.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndex

hpnicfifVLANTrunkGvrpRegistration		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.2
GVRP registration information normal: This is the default configuration. Allow create, register and unregister vlans dynamiclly at this port. fixed: Aallow create and register vlan manually at this port. Prevent from unregistering vlans or registering known vlans of this port at another trunk port. forbidden: Unregister all vlans but vlan 1, forbid to create or register any other vlans at this port.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	normal(1), fixed(2), forbidden(3)

hpnicfifVLANTrunkPassListLow		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.4
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each actually passed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is actually passed in the set of VLANs; the VLAN is not actually passed if its bit has a value of '0'.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hpnicfifVLANTrunkPassListHigh		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.5
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each actually passed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is actually passed in the set of VLANs; the VLAN is not actually passed if its bit has a value of '0'.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hpnicfifVLANTrunkAllowListLow		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.6
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is allowed in the set of VLANs; the VLAN is not allowed if its bit has a value of '0'.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

hpnicfifVLANTrunkAllowListHigh		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.7
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is allowed in the set of VLANs; the VLAN is not allowed if its bit has a value of '0'.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

hpnicfethernetTable		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4
Ethernet port attribute table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfEthernetEntry

hpnicfethernetEntry		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1
Entries of Ethernet port attribute table
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfEthernetEntry

hpnicfifEthernetDuplex		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.3
Ethernet interface mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	full(1), half(2), auto(3)

hpnicfifEthernetMTU		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.4
MTU on the Ethernet interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

hpnicfifEthernetSpeed		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.5
Ethernet interface speed.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	auto(0), s10M(10), s100M(100), s1000M(1000), s10000M(10000), s24000M(24000), s40000M(40000), s100000M(100000)

hpnicfifEthernetMdi		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.7
Type of the line connected to the port. MDI-II (straight-through cable): 1 MDI-X (crossover cable): 2 MDI-AUTO (auto-sensing): 3
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	mdi-ii(1), mdi-x(2), mdi-auto(3)

hpnicfMaxMacLearn		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.8
The maximum number of MAC addresses that the port can learn. The value -1 means that the number of Mac addresses that the port can learn is unlimited.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	-1..2147483647

hpnicfifMacAddressLearn		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.9
This object indicates if the interface is allowed to learn mac address. eanbled(1) means the interface can learn mac address, otherwise disabled(2) can be set.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

hpnicfifEthernetTest		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.10
Test this interface. The actual testing will be different according to products. Read operation not supported.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	test(1)

hpnicfifMacAddrLearnMode		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.11
Status indicates mac address learn mode of the interface. IVL(1) means independent VLAN learning. SVL means shared VLAN learning.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	iVL(1), sVL(2)

hpnicfifEthernetFlowInterval		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.12
Set flow interval of the ethernet. The NMS should set value to integer which is a multiple of 5.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	5..300

hpnicfifEthernetIsolate		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.13
Isolate group means that all ports in the same isolate group can not send and receive packets each other. Each octet within this value specifies a set of eight isolate groups, with the first octet specifying isolate groups 1 through 8, the second octet specifying isolate groups 9 through 16, etc. Within each octet, the leftmost bit is the first bit. the first bit represents the lowest numbered isolate group, and the last bit represents the highest numbered isolate group. one port can belong to more than one isolate group. Thus, each isolate group is represented by a single bit within the value of this object. If that bit has a value of '1', then that isolate group includes this port; the port is not included if its bit has a value of '0'. for example, the first octet is '10000100' means that the port is included in the isolate group 1 and isolate group 6.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

hpnicfifVlanVPNStatus		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.14
Vlan VPN enable status.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

hpnicfifVlanVPNUplinkStatus		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.15
Vlan VPN uplink status.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

hpnicfifVlanVPNTPID		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.16
Port based Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100. Please refer to hpnicfVlanVPNTPIDMode to get more information.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..65535

hpnicfifIsolateGroupID		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.17
Isolate group identifier. Value zero means this interface does not belong to any isolate group.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hpnicfifisUplinkPort		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.18
Ethernet uplink status, default value is 2.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

hpnicfifEthernetAutoSpeedMask		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.19
This object specifies which kinds of speed mode can be negotiated. Each bit corresponds to a kind of speed mode. If the value of a bit is '1', it means the corresponding speed mode is negotiable on the port. Otherwise the negotiation for that kind of speed mode is not supported on this port. If there are several negotiable speed modes, all bits for them are '1'. For example, if the speed mode 's10M' and 's1000M' can be negotiable, the value of this object is 0xA0.
Status: current	Access: read-only
OBJECT-TYPE
	SpeedModeFlag

hpnicfifEthernetAutoSpeed		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.20
This object indicates which kinds of speed mode are negotiable on this port. Only when a bit of hpnicfifEthernetAutoSpeedMask is '1', the corresponding bit of this object can be set to '1', indicating the corresponding speed mode is negotiable. For example, if the value of hpnicfifEthernetAutoSpeedMask is 0xA0, which indicates speed mode 's10M' and 's1000M' are negotiable, the possible value of this object should be one of the four values (0x00, 0x20, 0x80 and 0xA0). If the value of hpnicfifEthernetSpeed is not 'auto', the value of this object is insignificant and should be ignored. The value length of this object should be as long as that of hpnicfifEthernetAutoSpeedMask.
Status: current	Access: read-write
OBJECT-TYPE
	SpeedModeFlag

hpnicfIsolateGroupMax		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.5
Max isolate group that this device support, the value is zero means that the device does not support isolate group.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfGlobalBroadcastMaxPps		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.6
The global max packets per second. When it is set, the value of BroadcastMaxPps in all ports will be changed to that setting.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..14881000

hpnicfGlobalBroadcastMaxRatio		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.7
The global max-ratio of broadcast from 0 to 100 percent. When it is set, the value of BroadcastMaxRatio in all ports will be changed to that setting.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..100

hpnicfBpduTunnelStatus		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.8
Bpdu tunnel enable status.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

hpnicfVlanVPNTPIDMode		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.9
Vlan VPN TPID mode. The value 'port-based' means VLAN VPN TPID value would be set based on port via hpnicfifVlanVPNTPID. In this situation, hpnicfVlanVPNTPID is meaningless and always return 0x8100. The value 'global' means VLAN VPN TPID value should be set globally via hpnicfVlanVPNTPID. In this situation, hpnicfifVlanVPNTPID in hpnicfethernetTable has the same value with hpnicfVlanVPNTPID.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	port-based(1), global(2)

hpnicfVlanVPNTPID		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.10
Global Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..65535

hpnicfPortIsolateGroupTable		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.11
Isolate Group attribute table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfPortIsolateGroupEntry

hpnicfPortIsolateGroupEntry		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.11.1
The entry of hpnicfPortIsolateGroupTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfPortIsolateGroupEntry

hpnicfPortIsolateGroupIndex		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.11.1.1
Port isolate group identifier. The index of the hpnicfPortIsolateGroupTable. The value ranges from 1 to the limit of isolate group quantity.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hpnicfPortIsolateUplinkIfIndex		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.11.1.2
Index number of the uplink interface.
Status: current	Access: read-create
OBJECT-TYPE
	InterfaceIndex

hpnicfPortIsolateGroupRowStatus		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.11.1.3
Current operation status of the row.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpnicfPortIsolateGroupDescription		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.11.1.4
Port isolate group description, default value is zero-length string.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..80)

hpnicfMaxMacLearnRange		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.12
The maximum number of MAC address that the port supports.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfifPortProtocolStatTable		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13
This table contains objects of port statistics information based on IPv4 and IPv6 protocols.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfifPortProtocolStatEntry

hpnicfifPortProtocolStatEntry		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1
The entry of hpnicfifPortProtocolStatTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfifPortProtocolStatEntry

hpnicfifIPv4InOctets		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.1
Number of octets based on IPv4 received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifIPv4InUcastPkts		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.2
Number of unicast packets based on IPv4 received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifIPv4InMultiPkts		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.3
Number of multicast packets based on IPv4 received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifIPv4InBroadcastPkts		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.4
Number of broadcast packets based on IPv4 received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifIPv4InDiscards		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.5
Number of discard packets based on IPv4 received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifIPv4InErrors		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.6
Number of error packets based on IPv4 received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifIPv4OutOctets		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.7
Number of octets based on IPv4 transmitted out of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifIPv4OutUcastPkts		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.8
Number of unicast packets based on IPv4 transmitted out of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifIPv4OutMultiPkts		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.9
Number of multicast packets based on IPv4 transmitted out of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifIPv4OutBroadcastPkts		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.10
Number of broadcast packets based on IPv4 transmitted out of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifIPv4OutDiscards		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.11
Number of discard packets based on IPv4 transmitted out of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifIPv4OutErrors		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.12
Number of error packets based on IPv4 transmitted out of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifIPv6InOctets		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.13
Number of octets based on IPv6 received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifIPv6InUcastPkts		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.14
Number of unicast packets based on IPv6 received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifIPv6InMultiPkts		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.15
Number of multicast packets based on IPv6 received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifIPv6InAnycastPkts		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.16
Number of anycast packets based on IPv6 received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifIPv6InDiscards		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.17
Number of discard packets based on IPv6 received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifIPv6InErrors		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.18
Number of error packets based on IPv6 received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifIPv6OutOctets		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.19
Number of octets based on IPv6 transmitted of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifIPv6OutUcastPkts		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.20
Number of unicast packets based on IPv6 transmitted out of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifIPv6OutMultiPkts		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.21
Number of multicast packets based on IPv6 transmitted out of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifIPv6OutAnycastPkts		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.22
Number of anycast packets based on IPv6 transmitted out of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifIPv6OutDiscards		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.23
Number of discard packets based on IPv6 transmitted out of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfifIPv6OutErrors		1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.24
Number of error packets based on IPv6 transmitted out of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64