HUAWEI-IPDSLAM-MSTP-MIB
File:
HUAWEI-IPDSLAM-MSTP-MIB.mib (54823 bytes)
Imported modules
Imported symbols
Defined Types
HwMSTPEnabledStatus |
|
A simple status value for the object.
|
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
HwMstpVIDAllocationEntry |
|
SEQUENCE |
|
|
|
|
hwMstpVID |
Integer32 |
|
|
hwMstpAdminMstID |
Integer32 |
|
|
hwMstpOperMstID |
Integer32 |
|
HwMstpInstanceEntry |
|
SEQUENCE |
|
|
|
|
hwMstpInstanceID |
Integer32 |
|
|
hwMstpiBridgeID |
OCTET STRING |
|
|
hwMstpiBridgePriority |
Integer32 |
|
|
hwMstpiDesignedRoot |
OCTET STRING |
|
|
hwMstpiRootPathCost |
Integer32 |
|
|
hwMstpiRootPort |
Integer32 |
|
|
hwMstpiRootType |
INTEGER |
|
|
hwMstpiRemainingHops |
Integer32 |
|
|
hwMstpiAdminMappedVlanListLow |
OCTET STRING |
|
|
hwMstpiAdminMappedVlanListHigh |
OCTET STRING |
|
|
hwMstpiOperMappedVlanListLow |
OCTET STRING |
|
|
hwMstpiOperMappedVlanListHigh |
OCTET STRING |
|
|
hwMstpiRowStatus |
RowStatus |
|
|
hwMstpiBridgeSecondaryPriority |
Integer32 |
|
|
hwMstpiBridgeSecondaryPriorityBindPort |
Integer32 |
|
|
hwMstpiBridgeCurrentPriority |
Integer32 |
|
HwMstpPortEntry |
|
SEQUENCE |
|
|
|
|
hwMstpiPortIndex |
Integer32 |
|
|
hwMstpiPortState |
INTEGER |
|
|
hwMstpiPortPriority |
Integer32 |
|
|
hwMstpiPortPathCost |
Integer32 |
|
|
hwMstpiDesignatedRoot |
OCTET STRING |
|
|
hwMstpiDesignatedCost |
Integer32 |
|
|
hwMstpiDesignatedBridge |
OCTET STRING |
|
|
hwMstpiDesignatedPort |
OCTET STRING |
|
|
hwMstpiStpPortEdgeport |
HwMSTPEnabledStatus |
|
|
hwMstpiStpPortPointToPoint |
INTEGER |
|
|
hwMstpiStpMcheck |
INTEGER |
|
|
hwMstpiStpTransLimit |
Integer32 |
|
|
hwMstpiStpRXStpBPDU |
Counter32 |
|
|
hwMstpiStpTXStpBPDU |
Counter32 |
|
|
hwMstpiStpRXTCNBPDU |
Counter32 |
|
|
hwMstpiStpTXTCNBPDU |
Counter32 |
|
|
hwMstpiStpRXRSTPBPDU |
Counter32 |
|
|
hwMstpiStpTXRSTPBPDU |
Counter32 |
|
|
hwMstpiStpRXMSTPBPDU |
Counter32 |
|
|
hwMstpiStpTXMSTPBPDU |
Counter32 |
|
|
hwMstpiStpClearStatistics |
INTEGER |
|
|
hwMstpiStpDefaultPortCost |
INTEGER |
|
|
hwMstpiStpStatus |
HwMSTPEnabledStatus |
|
|
hwMstpiPortRootGuard |
HwMSTPEnabledStatus |
|
|
hwMstpiPortLoopGuard |
HwMSTPEnabledStatus |
|
|
hwMstpiPortCompliance |
INTEGER |
|
Defined Values
hwL2Mgmt |
1.3.6.1.4.1.2011.5.25.42 |
OBJECT IDENTIFIER |
|
|
|
hwMstp |
1.3.6.1.4.1.2011.5.25.42.4 |
The mib is used for defining MIB objects of the multiple spanning tree protocol (MSTP).
MSTP is an improvement of STP and RSTP.
MSTP prevents the proliferation and infinite cycling of the packets in the loop network.
In addition, MSTP provides multiple redundant paths for VLAN data transmission to
achieve the load-sharing purpose.
It supports MSTP loop network that helps meet various networking requirements. |
MODULE-IDENTITY |
|
|
|
hwMstpStatus |
1.3.6.1.4.1.2011.5.25.42.4.1.1 |
Indicates the status of the MSTP function of a bridge.
Options:
1. enabled(1) -indicates the MSTP function of a bridge is enabled
2. disabled(2) -indicates the MSTP function of a bridge is disabled
Default: disabled(2)
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
HwMSTPEnabledStatus |
|
|
hwMstpForceVersion |
1.3.6.1.4.1.2011.5.25.42.4.1.2 |
Indicates the MSTP version of the current bridge.
Options:
1. stp(0) -indicates the MSTP version of the current bridge is stp
2. rstp(2) -indicates the MSTP version of the current bridge is rstp
3. mstp(3) -indicates the MSTP version of the current bridge is mstp
Default: mstp(3)
rstp(2) is not supported.
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
stp(0), rstp(2), mstp(3) |
|
hwMstpDiameter |
1.3.6.1.4.1.2011.5.25.42.4.1.3 |
Indicates the diameter of the current bridged network.
Range: 2-7
Default: 7
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
2..7 |
|
hwMstpBridgeMaxHops |
1.3.6.1.4.1.2011.5.25.42.4.1.4 |
Indicates the maximum hop count of a region.
Range: 1-40
Default: 20
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..40 |
|
hwMstpMasterBridgeID |
1.3.6.1.4.1.2011.5.25.42.4.1.5 |
Indicates the master bridge ID of an IST in an MSTP region.
It is the root Bridge Identifier of the instance 0 in the region.
The format of the bridge ID is bridge priority (2B) + bridge MAC address (6B).
For example, if the bridge priority is 32768, and the bridge MAC address is 00.EE.DC.F9.13.20,
then the bridge ID is 80.00.00.EE.DC.F9.13.20.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(8) |
|
hwMstpMasterPathCost |
1.3.6.1.4.1.2011.5.25.42.4.1.6 |
Indicates the external path cost.
The value range of this leaf is relevant to hwMstpPathCostStandard.
Range: 1-65535 (The 802.1d-1998 protocol is used as the computing standard)
1-200000000 (The 802.1t protocol is used as the computing standard)
1-200000 (Huawei's proprietary legacy is used as the computing standard)
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
hwMstpBpduGuard |
1.3.6.1.4.1.2011.5.25.42.4.1.7 |
Indicates whether a bridge is enabled with BPDU protection.
Options:
1. enabled(1) -indicates BPDU protection of the bridge is enabled
2. disabled(2) -indicates BPDU protection of the bridge is disabled
Default: disabled(2)
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
HwMSTPEnabledStatus |
|
|
hwMstpAdminRegionName |
1.3.6.1.4.1.2011.5.25.42.4.1.9 |
Indicates the MSTP region name. The region name consists of up to 32 characters,
and only letters (case sensitive), numerals, the hyphen (-), and the underline (_)
are allowed.
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..32) |
|
hwMstpAdminRevisionLevel |
1.3.6.1.4.1.2011.5.25.42.4.1.10 |
Indicates the revision level of an MSTP region name.
Range: 0-65535
Default: 0
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..65535 |
|
hwMstpOperRegionName |
1.3.6.1.4.1.2011.5.25.42.4.1.12 |
Indicates the actually-used MSTP region name.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..32) |
|
hwMstpOperRevisionLevel |
1.3.6.1.4.1.2011.5.25.42.4.1.13 |
Indicates the revision level of the actually-used MSTP region name.
Default: 0
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..65535 |
|
hwMstpRegionConfActive |
1.3.6.1.4.1.2011.5.25.42.4.1.14 |
Indicates whether to activate the modified MSTP region configuration.
Options:
1. enable (1) -when you need to activate the modified MSTP region configuration, use this value to perform the set operation.
2. disable(2) -the modified MSTP region configuration cannot be set to disable. When you perform the get operation to query the configuration, this value will be returned.
This leaf supports only the set operation and it is recommended that you do not perform the get operation. If you perform the get operation, the value disable (2) will be returned.
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
hwMstpDefaultVlanAllo |
1.3.6.1.4.1.2011.5.25.42.4.1.15 |
Sets the default mapping between VLANs and spanning trees.
Options:
1. enable(1) -indicates the default mapping between VLANs and spanning trees is enabled
2. unused(65535) -indicates the default mapping between VLANs and spanning trees is unused
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), unused(65535) |
|
hwMstpDefaultRegionName |
1.3.6.1.4.1.2011.5.25.42.4.1.16 |
Sets the default region name.
Options:
1. reset(1) -indicates the default region name is used
2. unused(65535) -indicates the default region name is unused
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
reset(1), unused(65535) |
|
hwMstpPathCostStandard |
1.3.6.1.4.1.2011.5.25.42.4.1.17 |
Indicates the reference standard for path cost computation of a bridge.
Options:
1. dot1d1998(1) -indicates dot1d1998 is the reference standard for path cost computation of a bridge
2. dot1t(2) -indicates dot1t is the reference standard for path cost computation of a bridge
3. legacy(3) -indicates legacy is the reference standard for path cost computation of a bridge
Default: legacy(3)
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
dot1d1998(1), dot1t(2), legacy(3) |
|
hwMstpTimeFactor |
1.3.6.1.4.1.2011.5.25.42.4.1.21 |
Indicates the timeout factor of a bridge.
Range: 1-10
Default: 3
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..10 |
|
hwMstpMD5KEY |
1.3.6.1.4.1.2011.5.25.42.4.1.22 |
Indicates the MD5 key used for generating the region configuration digest of the MSTP protocol.
Default: 0x13AC06A62E47FD51F95D2BA243CD0346
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..16) |
|
hwMstpVIDAllocationTable |
1.3.6.1.4.1.2011.5.25.42.4.1.18 |
Indicates the mapping between VLANs and instances extended by MSTP.
The index of this table is hwMstpVID.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HwMstpVIDAllocationEntry |
|
hwMstpVIDAllocationEntry |
1.3.6.1.4.1.2011.5.25.42.4.1.18.1 |
Indicates the mapping between VLANs and instances extended by MSTP.
The index of this entry is hwMstpVID.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HwMstpVIDAllocationEntry |
|
|
hwMstpVID |
1.3.6.1.4.1.2011.5.25.42.4.1.18.1.1 |
It is an index and indicates the VLAN ID.
Range: 1-4094
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..4094 |
|
hwMstpAdminMstID |
1.3.6.1.4.1.2011.5.25.42.4.1.18.1.2 |
Indicates the configured MSTP region ID. Currently, the system supports
only 17 instances, that is, instances 0-16.
Range: 0-48
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..48 |
|
hwMstpOperMstID |
1.3.6.1.4.1.2011.5.25.42.4.1.18.1.3 |
Indicates the MSTP region ID in actual running. Currently, the system
supports only 17 instances, that is, instances 0-16.
Range: 0-48
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..48 |
|
hwMstpInstanceTable |
1.3.6.1.4.1.2011.5.25.42.4.1.19 |
Indicates the instances extended by MSTP.
The index of this table is hwMstpInstanceID.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HwMstpInstanceEntry |
|
hwMstpInstanceEntry |
1.3.6.1.4.1.2011.5.25.42.4.1.19.1 |
Indicates the instances extended by MSTP.
The index of this entry is hwMstpInstanceID.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HwMstpInstanceEntry |
|
|
hwMstpInstanceID |
1.3.6.1.4.1.2011.5.25.42.4.1.19.1.1 |
It is an index and indicates the MSTI ID.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..48 |
|
hwMstpiBridgeID |
1.3.6.1.4.1.2011.5.25.42.4.1.19.1.2 |
The Bridge Identifier for the spanning tree instance identified by MSTID.
The format of the bridge ID is bridge priority (2B) + bridge MAC address (6B).
For example, if the bridge priority is 32768, and the bridge MAC address is 00.EE.DC.F9.13.20,
then the bridge ID is 80.00.00.EE.DC.F9.13.20.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(8) |
|
hwMstpiBridgePriority |
1.3.6.1.4.1.2011.5.25.42.4.1.19.1.3 |
Indicates the primary priority of the CIST bridge, or priority of the bridge in others.
Range: 0-61440
Default: 32768
Step: 4096
|
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..61440 |
|
hwMstpiDesignedRoot |
1.3.6.1.4.1.2011.5.25.42.4.1.19.1.4 |
Indicates the master bridge ID of an MSTI in the region.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(8) |
|
hwMstpiRootPathCost |
1.3.6.1.4.1.2011.5.25.42.4.1.19.1.5 |
Indicates the cost of the path from the BPDU-transmitting bridge to the root bridge.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
hwMstpiRootPort |
1.3.6.1.4.1.2011.5.25.42.4.1.19.1.6 |
Indicates the root port of an MSTI in the region.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
hwMstpiRootType |
1.3.6.1.4.1.2011.5.25.42.4.1.19.1.7 |
Indicates the type of the bridge.
Options:
1. normal(0) -indicates the bridge is normal
2. secondary(1) -indicates the bridge is secondary
3. primary(2) -indicates the bridge is primary
Default: normal(0)
|
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
normal(0), secondary(1), primary(2) |
|
hwMstpiRemainingHops |
1.3.6.1.4.1.2011.5.25.42.4.1.19.1.8 |
Indicates the remaining hops of an MSTI in the region.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
hwMstpiAdminMappedVlanListLow |
1.3.6.1.4.1.2011.5.25.42.4.1.19.1.9 |
Used for setting the mapping between the first 2047 VLANs (VLAN 1 to VLAN 2047) in a VLAN list and MSTIs.
For example, if the vlan 1 and vlan 2047 belongs to this instance,
the hwMstpiAdminMappedVlanListLow is # 40.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.01.
|
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..256) |
|
hwMstpiAdminMappedVlanListHigh |
1.3.6.1.4.1.2011.5.25.42.4.1.19.1.10 |
Used for setting the mapping between the last 2047 VLANs (VLAN 2048 to VLAN 4094) in a VLAN list and MSTIs.
For example, if the vlan 2048 and vlan 4094 belongs to this instance,
the hwMstpiAdminMappedVlanListHigh is # 80.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.02.
|
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..256) |
|
hwMstpiOperMappedVlanListLow |
1.3.6.1.4.1.2011.5.25.42.4.1.19.1.11 |
Used for setting the mapping between the first 2047 VLANs (VLAN 1 to VLAN 2047) in a VLAN list and MSTIs in
actual running.
For example, if the vlan 1 and vlan 2047 belongs to this instance,
the hwMstpiOperMappedVlanListLow is # 40.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.01.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..256) |
|
hwMstpiOperMappedVlanListHigh |
1.3.6.1.4.1.2011.5.25.42.4.1.19.1.12 |
Used for setting the mapping between the last 2047 VLANs (VLAN 2048 to VLAN 4094) in a VLAN list and MSTIs in actual running.
For example, if the vlan 2048 and vlan 4094 belongs to this instance,
the hwMstpiOperMappedVlanListHigh is # 80.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.02.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..256) |
|
hwMstpiRowStatus |
1.3.6.1.4.1.2011.5.25.42.4.1.19.1.13 |
Indicates the row status, which is the operation type of the table.
Only option createAndGo(4) supports the set operation.
In the query operation, the value of this leaf is always active(1).
To create an MSTI, optionally input leaves hwMstpiBridgePriority, hwMstpiRootType,
hwMstpiAdminMappedVlanListLow, and hwMstpiAdminMappedVlanListHigh, specify the value
of hwMstpiRowStatus to createAndGo(4), and perform the set operation.
To modify the values of other leaves, you can directly perform the set operation without
setting and issuing the row status.
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates creating an MSTI
3. destroy(6) -indicates deleting an MSTI
|
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
hwMstpiBridgeSecondaryPriority |
1.3.6.1.4.1.2011.5.25.42.4.1.19.1.14 |
Indicates the secondary priority of the CIST bridge. Only used by CIST.
Range: 0-61440
Default: 61440
Step: 4096
|
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..61440 |
|
hwMstpiBridgeSecondaryPriorityBindPort |
1.3.6.1.4.1.2011.5.25.42.4.1.19.1.15 |
Indicates the port which bound secondary priority of the CIST bridge in the region. Only used by CIST.
Default: 0
|
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
hwMstpiBridgeCurrentPriority |
1.3.6.1.4.1.2011.5.25.42.4.1.19.1.16 |
Indicates the current priority of the bridge, including CIST and others.
Range: 0-61440
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..61440 |
|
hwMstpPortTable |
1.3.6.1.4.1.2011.5.25.42.4.1.20 |
Indicates the ports extended by MSTP.
The indexes of this table are hwMstpInstanceID and hwMstpiPortIndex.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HwMstpPortEntry |
|
hwMstpPortEntry |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1 |
Indicates the ports extended by MSTP.
The indexes of this entry are hwMstpInstanceID and hwMstpiPortIndex.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HwMstpPortEntry |
|
|
hwMstpiPortIndex |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1.1 |
It is an index and indicates a bridge port.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
hwMstpiPortState |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1.2 |
Indicates the port status.
Options:
1. disabled(1) -indicates the port is down
2. discarding(2) -indicates the port is discarding. During this phase,
port can only receive and process BPDU data packet,
not forward traffic, root bridge, root port, and specified
port will be voted
3. learning(4) -indicates the port is learning. During this phase,
bridge will create MAC address table according the
received traffic, but not forward traffic
4. forwarding(5) -indicates traffic forward
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), discarding(2), learning(4), forwarding(5) |
|
hwMstpiPortPriority |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1.3 |
Indicates the port priority.
Range: 0-240
Default: 128
Step: 16
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..240 |
|
hwMstpiPortPathCost |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1.4 |
Indicates the path cost of the port.
The value range of this leaf is relevant to hwMstpPathCostStandard.
Range: 1-65535 (The 802.1d-1998 protocol is used as the computing standard)
1-200000000 (The 802.1t protocol is used as the computing standard)
1-200000 (Huawei's proprietary legacy is used as the computing standard)
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..200000000 |
|
hwMstpiDesignatedRoot |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1.5 |
The Bridge Identifier of the Root Bridge for the port of the Spanning Tree instance identified by the MSTID.
The format of the bridge ID is bridge priority (2B) + bridge MAC address (6B).
For example, if the bridge priority is 32768, and the bridge MAC address is 00.EE.DC.F9.13.20,
then the bridge ID is 80.00.00.EE.DC.F9.13.20.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(8) |
|
hwMstpiDesignatedCost |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1.6 |
Indicates the cost of the path from the port to the root bridge.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
hwMstpiDesignatedBridge |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1.7 |
Indicates the designated bridge.
The format of the bridge ID is bridge priority (2B) + bridge MAC address (6B).
For example, if the bridge priority is 32768, and the bridge MAC address is 00.EE.DC.F9.13.20,
then the bridge ID is 80.00.00.EE.DC.F9.13.20.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(8) |
|
hwMstpiDesignatedPort |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1.8 |
Indicates the designated port.
The format of the port ID is port priority (1B) + port number (1B).
For example, if the port priority is 128, and the port number is 1, then the port ID is 80.01.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(2) |
|
hwMstpiStpPortEdgeport |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1.9 |
Indicates whether the current port is an edge port.
Options:
1. enabled(1) -indicates the current port is an edge port
2. disabled(2) -indicates the current port is not an edge port
Default: disabled(2)
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
HwMSTPEnabledStatus |
|
|
hwMstpiStpPortPointToPoint |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1.10 |
Indicates whether the current port is a point-to-point port.
Options:
1. forceTrue(1) -indicates the current port is a point-to-point port
2. forceFalse(2) -indicates the current port is not a point-to-point port
3. auto(3) -indicates the current port is a self-negotiation port
Default: auto(3)
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
forceTrue(1), forceFalse(2), auto(3) |
|
hwMstpiStpMcheck |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1.11 |
Indicates the mcheck parameter of the bridge port.
Options:
1. enable(1) -indicates the mcheck parameter of the bridge port is enabled
2. unused(65535) -indicates the mcheck parameter of the bridge port is unused
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), unused(65535) |
|
hwMstpiStpTransLimit |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1.12 |
Indicates the maximum number of BPDUs that can be transmitted within the hello time.
Range: 1-255
Default: 3
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..255 |
|
hwMstpiStpRXStpBPDU |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1.13 |
Indicates the number of BPDUs received by the port.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
hwMstpiStpTXStpBPDU |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1.14 |
Indicates the number of BPDUs transmitted by the port.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
hwMstpiStpRXTCNBPDU |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1.15 |
Indicates the number of TCN BPDUs received by the port.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
hwMstpiStpTXTCNBPDU |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1.16 |
Indicates the number of TCN BPDUs transmitted by the port.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
hwMstpiStpRXRSTPBPDU |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1.17 |
Indicates the number of RST BPDUs received by the port.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
hwMstpiStpTXRSTPBPDU |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1.18 |
Indicates the number of RST BPDUs transmitted by the port.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
hwMstpiStpRXMSTPBPDU |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1.19 |
Indicates the number of MST BPDUs received by the port.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
hwMstpiStpTXMSTPBPDU |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1.20 |
Indicates the number of MST BPDUs transmitted by the port.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
hwMstpiStpClearStatistics |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1.21 |
Indicates whether to clear the statistics.
Options:
1. clear(1) -indicates the statistics is cleared
2. unused(65535) -indicates the statistics is not cleared
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
clear(1), unused(65535) |
|
hwMstpiStpDefaultPortCost |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1.22 |
Indicates whether to restore the default port cost.
Options:
1. reset(1) -indicates the default port cost is restored
2. unused(65535) -indicates the default port cost is not restored
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
reset(1), unused(65535) |
|
hwMstpiStpStatus |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1.23 |
Indicates whether STP is enabled on the port.
Options:
1. enabled(1) -indicates STP is enabled on the port
2. disabled(2) -indicates STP is not enabled on the port
Default: enabled(1)
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
HwMSTPEnabledStatus |
|
|
hwMstpiPortRootGuard |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1.24 |
Indicates whether root protection is enabled on the port.
Options:
1. enabled(1) -indicates root protection is enabled on the port
2. disabled(2) -indicates root protection is disabled on the port
Default: disabled(2)
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
HwMSTPEnabledStatus |
|
|
hwMstpiPortLoopGuard |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1.25 |
Indicates whether loop protection is enabled on the port.
Options:
1. enabled(1) -indicates loop protection is enabled on the port
2. disabled(2) -indicates loop protection is disabled on the port
Default: disabled(2)
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
HwMSTPEnabledStatus |
|
|
hwMstpiPortCompliance |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1.26 |
Indicates the MSTP compliance type of the current port.
Options:
1. auto(1) -indicates the MSTP compliance type of the current port is auto
2. dot1w(2) -indicates the MSTP compliance type of the current port is dot1w
Default: auto(1).
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
auto(1), dot1w(2) |
|
hwMstpTraps |
1.3.6.1.4.1.2011.5.25.42.4.2 |
Definition point for Mstp notifications.
|
Status: current |
Access: read-write |
OBJECT-IDENTITY |
|
|
|
hwMstpiPortStateForwarding |
1.3.6.1.4.1.2011.5.25.42.4.2.1.0.1 |
The SNMP trap that is generated when a port turns into
forwarding state form other state.
|
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
hwMstpiPortStateDiscarding |
1.3.6.1.4.1.2011.5.25.42.4.2.1.0.2 |
The SNMP trap that is generated when a port turns into
discarding state form forwarding state.
|
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
hwMstpiPortRootGuarded |
1.3.6.1.4.1.2011.5.25.42.4.2.1.0.3 |
The SNMP trap that is generated when a root-guard port
receives a superior message on the relevant instance.
|
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
hwMstpiPortRootGuardedResume |
1.3.6.1.4.1.2011.5.25.42.4.2.1.0.4 |
The SNMP trap that is generated when a root-guard port
not receives a superior message on the relevant instance.
|
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
hwMstpiPortBpduGuarded |
1.3.6.1.4.1.2011.5.25.42.4.2.1.0.5 |
The SNMP trap that is generated when an edged port of
the BPDU-guard switch receives BPDU packets.
|
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
hwMstpiPortBpduGuardedResume |
1.3.6.1.4.1.2011.5.25.42.4.2.1.0.6 |
The SNMP trap that is generated when an edged port of
the BPDU-guard switch not receives BPDU packets.
|
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
hwMstpiPortDisable |
1.3.6.1.4.1.2011.5.25.42.4.2.1.0.7 |
The SNMP trap that is generated when a port disable
stp.
|
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
hwMstpGroups |
1.3.6.1.4.1.2011.5.25.42.4.3.1 |
OBJECT IDENTIFIER |
|
|
|
hwMstpBridgeInfoGroup |
1.3.6.1.4.1.2011.5.25.42.4.3.1.1 |
A collection of objects indicating the necessary
capabilites of the bridge device which is running the multi spanning tree protocol.
|
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
hwMstpVlanInfoGroup |
1.3.6.1.4.1.2011.5.25.42.4.3.1.2 |
A collection of objects describes
the attribute of the vlan in the multi spanning tree protocol.
They are necessary to find the relation
between vlan and instance by the vlan identifier.
|
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
hwMstpInstanceInfoGroup |
1.3.6.1.4.1.2011.5.25.42.4.3.1.3 |
A collection of objects describes
the attribute of the instance in the multi spanning tree protocol.
|
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
hwMstpPortInfoGroup |
1.3.6.1.4.1.2011.5.25.42.4.3.1.4 |
A collection of objects is necessary to show the
information of the port in the bridge in the multi
spanning tree protocol.
|
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
hwMstpCompliance |
1.3.6.1.4.1.2011.5.25.42.4.3.2.1 |
The compliance statement for device support of Priority
and Multicast Filtering extended bridging services.
|
Status: current |
Access: read-write |
MODULE-COMPLIANCE |
|
|
|