SITEBOSS-450-STD-MIB

File: SITEBOSS-450-STD-MIB.mib (596369 bytes)

Imported modules

SNMPv2-TC SNMPv2-SMI ASENTRIA-ROOT-MIB

Imported symbols

DisplayString IpAddress TimeTicks
Integer32 MODULE-IDENTITY NOTIFICATION-TYPE
OBJECT-TYPE asentria

Defined Types

ESPointConfigTemp  
SEQUENCE    
  espcTempIndexES Integer32
  espcTempIndexPoint Integer32
  espcTempEnable DisplayString
  espcTempScale DisplayString
  espcTempDeadband DisplayString
  espcTempVHighTemp DisplayString
  espcTempVHighActions DisplayString
  espcTempVHighTrapnum Integer32
  espcTempVHighClass DisplayString
  espcTempHighTemp DisplayString
  espcTempHighActions DisplayString
  espcTempHighTrapnum Integer32
  espcTempHighClass DisplayString
  espcTempNormalActions DisplayString
  espcTempNormalTrapnum Integer32
  espcTempNormalClass DisplayString
  espcTempLowTemp DisplayString
  espcTempLowActions DisplayString
  espcTempLowTrapnum Integer32
  espcTempLowClass DisplayString
  espcTempVLowTemp DisplayString
  espcTempVLowActions DisplayString
  espcTempVLowTrapnum Integer32
  espcTempVLowClass DisplayString

ESPointConfigCC  
SEQUENCE    
  espcCCIndexES Integer32
  espcCCIndexPoint Integer32
  espcCCEnable DisplayString
  espcCCName DisplayString
  espcCCEventState DisplayString
  espcCCThreshold Integer32
  espcCCEventActions DisplayString
  espcCCEventTrapnum Integer32
  espcCCEventClass DisplayString
  espcCCNormalActions DisplayString
  espcCCNormalTrapnum Integer32
  espcCCNormalClass DisplayString
  espcCCAlarmAlias DisplayString
  espcCCNormalAlias DisplayString
  espcCCNormalThreshold Integer32

ESPointConfigHumid  
SEQUENCE    
  espcHumidIndexES Integer32
  espcHumidIndexPoint Integer32
  espcHumidEnable DisplayString
  espcHumidDeadband Integer32
  espcHumidVHighHumid Integer32
  espcHumidVHighActions DisplayString
  espcHumidVHighTrapnum Integer32
  espcHumidVHighClass DisplayString
  espcHumidHighHumid Integer32
  espcHumidHighActions DisplayString
  espcHumidHighTrapnum Integer32
  espcHumidHighClass DisplayString
  espcHumidNormalActions DisplayString
  espcHumidNormalTrapnum Integer32
  espcHumidNormalClass DisplayString
  espcHumidLowHumid Integer32
  espcHumidLowActions DisplayString
  espcHumidLowTrapnum Integer32
  espcHumidLowClass DisplayString
  espcHumidVLowHumid Integer32
  espcHumidVLowActions DisplayString
  espcHumidVLowTrapnum Integer32
  espcHumidVLowClass DisplayString

ESPointConfigAnalogInput  
SEQUENCE    
  espcAIIndexES Integer32
  espcAIIndexPoint Integer32
  espcAIEnable DisplayString
  espcAIPolarity DisplayString
  espcAIDeadband Integer32
  espcAIVhighValue Integer32
  espcAIVhighActions DisplayString
  espcAIVhighTrapnum Integer32
  espcAIVhighClass DisplayString
  espcAIHighValue Integer32
  espcAIHighActions DisplayString
  espcAIHighTrapnum Integer32
  espcAIHighClass DisplayString
  espcAINormalActions DisplayString
  espcAINormalTrapnum Integer32
  espcAINormalClass DisplayString
  espcAILowValue Integer32
  espcAILowActions DisplayString
  espcAILowTrapnum Integer32
  espcAILowClass DisplayString
  espcAIVlowValue Integer32
  espcAIVlowActions DisplayString
  espcAIVlowTrapnum Integer32
  espcAIVlowClass DisplayString
  espcAIConvUnitName DisplayString
  espcAIConvHighValue Integer32
  espcAIConvHighUnit Integer32
  espcAIConvHighSign DisplayString
  espcAIConvLowValue Integer32
  espcAIConvLowUnit Integer32
  espcAIConvLowSign DisplayString

EventClassConfig  
SEQUENCE    
  evClassNameIndex Integer32
  evClassName DisplayString

RTSFileConfig  
SEQUENCE    
  rtsFileIndex Integer32
  rtsFileMode DisplayString
  rtsFileShowAnswer DisplayString
  rtsFileReqXON DisplayString
  rtsFileTimeout Integer32
  rtsFileEmptyClose DisplayString
  rtsFilePushHost DisplayString
  rtsFilePushPort Integer32
  rtsFilePushRetryTimer Integer32

ScriptingConfig  
SEQUENCE    
  scrIndex Integer32
  scrEnable DisplayString
  scrName DisplayString
  scrFilename DisplayString
  scrRunAlways DisplayString
  scrRunAtStartup DisplayString
  scrRunScheduled DisplayString
  scrScheduleTime DisplayString
  scrArguments DisplayString
  scrRepeatInterval Integer32

ScriptingDTRCtrlPortEnableConfig  
SEQUENCE    
  scrDTRCtrlPortEnableIndex Integer32
  scrDTRCtrlPortEnable DisplayString

ScriptingVolatileString  
SEQUENCE    
  scrVolatileStringIndex Integer32
  scrVolatileString DisplayString

ScriptingVolatileInt  
SEQUENCE    
  scrVolatileIntIndex Integer32
  scrVolatileInt Integer32

ScriptingNonVolatileString  
SEQUENCE    
  scrNonVolatileStringIndex Integer32
  scrNonVolatileString DisplayString

ScriptingNonVolatileInt  
SEQUENCE    
  scrNonVolatileIntIndex Integer32
  scrNonVolatileInt Integer32

CRDBFileEnforceMinConfig  
SEQUENCE    
  sysCRDBFileEnforceMinIndex Integer32
  sysCRDBFileEnforceMin DisplayString

CRDBFileIDConfig  
SEQUENCE    
  sysCRDBFileIDIndex Integer32
  sysCRDBFileID DisplayString

NetworkTimeHostConfig  
SEQUENCE    
  sysTimeNetHostIndex Integer32
  sysTimeNetHost DisplayString

ActionHostConfig  
SEQUENCE    
  actionHostIndex Integer32
  actionHost DisplayString

ActionEmailConfig  
SEQUENCE    
  actionEmailIndex Integer32
  actionEmail DisplayString

FileEnforceMinimumConfig  
SEQUENCE    
  sysCRDBFileEnforceMinIndex Integer32
  sysCRDBFileEnforceMin DisplayString

SerialHandshakingLowEventConfig  
SEQUENCE    
  evShskLowIndex Integer32
  evShskLowEnable DisplayString
  evShskLowActions DisplayString
  evShskLowMessage DisplayString
  evShskLowClass DisplayString
  evShskLowTrapNum Integer32

SerialHandshakingHighEventConfig  
SEQUENCE    
  evShskHighIndex Integer32
  evShskHighEnable DisplayString
  evShskHighActions DisplayString
  evShskHighMessage DisplayString
  evShskHighClass DisplayString
  evShskHighTrapNum Integer32

SecUserConfig  
SEQUENCE    
  secUserIndex Integer32
  secUserEnable DisplayString
  secUserConnectVia DisplayString
  secUserLoginTo DisplayString
  secUserAccessFile DisplayString
  secUserPTEscapeTo DisplayString
  secUserPPPType DisplayString
  secUserRights DisplayString
  secUserEventsReadAccess DisplayString
  secUserAuditReadAccess DisplayString
  secUserEventsWriteAccess DisplayString
  secUserAuditWriteAccess DisplayString
  secUserExpiration DisplayString
  secUserCallbackNumber1 DisplayString
  secUserCallbackNumber2 DisplayString
  secUserCallbackNumber3 DisplayString
  secUserChallengeTelnetMode DisplayString
  secUserChallengeModemMode DisplayString
  secUserChallengeConsoleMode DisplayString
  secUserChallengeTelnetSendTo DisplayString
  secUserChallengeModemSendTo DisplayString
  secUserChallengeExpiration Integer32

IPRestrictionConfig  
SEQUENCE    
  ipRestrictionIndex Integer32
  ipRestrictionEnable DisplayString
  ipRestrictionMask IpAddress

DNSConfig  
SEQUENCE    
  dnsIndex Integer32
  dnsAddress IpAddress

HostConfig  
SEQUENCE    
  hostIndex Integer32
  hostDeclaration DisplayString

SNMPProxyTable  
SEQUENCE    
  snmpProxyIndex Integer32
  snmpProxyOIDBranch DisplayString
  snmpProxyIP DisplayString
  snmpProxyPort Integer32

SNMPPollRequestConfig  
SEQUENCE    
  snmpPRequestIndex Integer32
  snmpPRequestDescription DisplayString
  snmpPRequestAgent DisplayString
  snmpPRequestReadcom DisplayString
  snmpPRequestOID DisplayString
  snmpPRequestPeriod Integer32
  snmpPRequestResultStatus DisplayString
  snmpPRequestResultValue DisplayString
  snmpPRequestResultTime DisplayString
  snmpPRequestResultType DisplayString

FTPPushPushFileConfig  
SEQUENCE    
  ftpPushPushFileIndex Integer32
  ftpPushPushFile DisplayString

FTPPushRemoteFileConfig  
SEQUENCE    
  ftpPushRemoteFileIndex Integer32
  ftpPushRemoteFileName DisplayString

PortConfig  
SEQUENCE    
  portConfigIndex Integer32
  portConfigBaud Integer32
  portConfigDataFormat Integer32
  portConfigStripPtOutputLfs Integer32
  portConfigStripPtInputLfs Integer32
  portConfigMaskEnable Integer32
  portConfigDAEnable Integer32
  portConfigStoreAlarmsDPT DisplayString
  portConfigRecordTimeout Integer32
  portConfigDataType DisplayString
  portConfigEtxToCRLF DisplayString
  portConfigMLREnable DisplayString
  portConfigMLRStartField1Pos Integer32
  portConfigMLRStartField1Text DisplayString
  portConfigMLRStartField2Pos Integer32
  portConfigMLRStartField2Text DisplayString
  portConfigMLRNumLinesBefore Integer32
  portConfigMLREndDetection DisplayString
  portConfigMLRLineCount Integer32
  portConfigMLREndField1Pos Integer32
  portConfigMLREndField1Text DisplayString
  portConfigMLREndField2Pos Integer32
  portConfigMLREndField2Text DisplayString
  portConfigMLRUseComplexRules DisplayString
  portConfigBufferPT DisplayString
  portConfigId DisplayString

ESPoint  
SEQUENCE    
  esIndexES Integer32
  esIndexPC Integer32
  esIndexPoint Integer32
  esPointName DisplayString
  esPointInEventState Integer32
  esPointValueInt Integer32
  esPointValueStr DisplayString
  esPointTimeLastChange DisplayString
  esPointTimetickLastChange TimeTicks
  esPointAliasValueStr DisplayString

ESExist  
SEQUENCE    
  esIndex Integer32
  esName DisplayString
  esID DisplayString
  esNumberTempSensors Integer32
  esTempReportingMode DisplayString
  esNumberCCs Integer32
  esCCReportingMode DisplayString
  esNumberHumidSensors Integer32
  esHumidReportingMode DisplayString
  esNumberNoiseSensors Integer32
  esNoiseReportingMode DisplayString
  esNumberAirflowSensors Integer32
  esAirflowReportingMode DisplayString
  esNumberAnalog Integer32
  esAnalogReportingMode DisplayString
  esNumberRelayOutputs Integer32
  esRelayReportingMode DisplayString
  esTempCombinedStatus DisplayString
  esCCCombinedStatusBlock1 DisplayString
  esCCCombinedStatusBlock2 DisplayString
  esCCCombinedStatusBlock3 DisplayString
  esCCCombinedStatusBlock4 DisplayString
  esCCCombinedStatusBlock5 DisplayString
  esCCCombinedStatusBlock6 DisplayString
  esCCCombinedStatusBlock7 DisplayString
  esCCCombinedStatusBlock8 DisplayString
  esHumidCombinedStatus DisplayString
  esAnalogCombinedStatusBlock1 DisplayString
  esAnalogCombinedStatusBlock2 DisplayString
  esAnalogCombinedStatusBlock3 DisplayString
  esAnalogCombinedStatusBlock4 DisplayString
  esAnalogCombinedStatusBlock5 DisplayString
  esAnalogCombinedStatusBlock6 DisplayString
  esOutputCombinedStatusBlock1 DisplayString
  esOutputCombinedStatusBlock2 DisplayString

DEStatus  
SEQUENCE    
  deStatusIndex Integer32
  deStatusName DisplayString
  deStatusCounter Integer32
  deStatusThreshold Integer32

FSStatus  
SEQUENCE    
  fsStatusIndex Integer32
  fsStatusName DisplayString
  fsStatusDeviceState DisplayString
  fsStatusVolumeValueString DisplayString
  fsStatusVolumePercentLevel DisplayString
  fsStatusVolumeInEventState DisplayString
  fsStatusCombined DisplayString

ACPMStatus  
SEQUENCE    
  acpmsIndex Integer32
  acpmsName DisplayString
  acpmsAvgVoltageValueStr DisplayString
  acpmsAvgVoltageMinStr DisplayString
  acpmsAvgVoltageMaxStr DisplayString
  acpmsAvgVoltageAvgStr DisplayString
  acpmsAvgVoltageInEventState DisplayString
  acpmsVoltagePhaseAValueStr DisplayString
  acpmsVoltagePhaseBValueStr DisplayString
  acpmsVoltagePhaseCValueStr DisplayString
  acpmsAvgCurrentValueStr DisplayString
  acpmsAvgCurrentMinStr DisplayString
  acpmsAvgCurrentMaxStr DisplayString
  acpmsAvgCurrentAvgStr DisplayString
  acpmsAvgCurrentInEventState DisplayString
  acpmsCurrentPhaseAValueStr DisplayString
  acpmsCurrentPhaseBValueStr DisplayString
  acpmsCurrentPhaseCValueStr DisplayString
  acpmsAvgFreqValueStr DisplayString
  acpmsAvgFreqMinStr DisplayString
  acpmsAvgFreqMaxStr DisplayString
  acpmsAvgFreqAvgStr DisplayString
  acpmsAvgFreqInEventState DisplayString
  acpmsTRPValueStr DisplayString
  acpmsTRPMinStr DisplayString
  acpmsTRPMaxStr DisplayString
  acpmsTRPAvgStr DisplayString
  acpmsTRPInEventState DisplayString
  acpmsRPPhaseAValueStr DisplayString
  acpmsRPPhaseBValueStr DisplayString
  acpmsRPPhaseCValueStr DisplayString
  acpmsCombined DisplayString
  acpmsTPFValueStr DisplayString
  acpmsTPFMinStr DisplayString
  acpmsTPFMaxStr DisplayString
  acpmsTPFAvgStr DisplayString
  acpmsTPFInEventState DisplayString
  acpmsPFPhaseAValueStr DisplayString
  acpmsPFPhaseBValueStr DisplayString
  acpmsPFPhaseCValueStr DisplayString
  acpmsTRcPValueStr DisplayString
  acpmsTRcPMinStr DisplayString
  acpmsTRcPMaxStr DisplayString
  acpmsTRcPAvgStr DisplayString
  acpmsRcPPhaseAValueStr DisplayString
  acpmsRcPPhaseBValueStr DisplayString
  acpmsRcPPhaseCValueStr DisplayString
  acpmsTAPValueStr DisplayString
  acpmsTAPMinStr DisplayString
  acpmsTAPMaxStr DisplayString
  acpmsTAPAvgStr DisplayString
  acpmsAPPhaseAValueStr DisplayString
  acpmsAPPhaseBValueStr DisplayString
  acpmsAPPhaseCValueStr DisplayString
  acpmsTotalEnergyWh Integer32
  acpmsTotalEnergyVAR Integer32
  acpmsTotalEnergyVA Integer32

ScheduleConfig  
SEQUENCE    
  schedIndex Integer32
  schedEnable DisplayString
  schedStart DisplayString
  schedRepeatMode DisplayString
  schedRepeatFreq Integer32
  schedRepeatEndMode DisplayString
  schedRepeatEndAfter Integer32
  schedRepeatEndOn DisplayString
  schedRepeatWeeklySun DisplayString
  schedRepeatWeeklyMon DisplayString
  schedRepeatWeeklyTue DisplayString
  schedRepeatWeeklyWed DisplayString
  schedRepeatWeeklyThu DisplayString
  schedRepeatWeeklyFri DisplayString
  schedRepeatWeeklySat DisplayString
  schedRepeatMonthlyMode DisplayString
  schedRepeatMonthlyDates DisplayString
  schedRepeatMonthlyOnThe DisplayString
  schedRepeatMonthlyOnDay DisplayString
  schedRepeatYearlyJan DisplayString
  schedRepeatYearlyFeb DisplayString
  schedRepeatYearlyMar DisplayString
  schedRepeatYearlyApr DisplayString
  schedRepeatYearlyMay DisplayString
  schedRepeatYearlyJun DisplayString
  schedRepeatYearlyJul DisplayString
  schedRepeatYearlyAug DisplayString
  schedRepeatYearlySep DisplayString
  schedRepeatYearlyOct DisplayString
  schedRepeatYearlyNov DisplayString
  schedRepeatYearlyDec DisplayString
  schedRepeatYearlyOnThe DisplayString
  schedRepeatYearlyOnDay DisplayString
  schedNextTrigger DisplayString

FuelSensorConfigGeneral  
SEQUENCE    
  fsGenIndex Integer32
  fsGenName DisplayString
  fsGenSensorType DisplayString
  fsGenDistanceUnit DisplayString
  fsGenRawValueTop Integer32
  fsGenTopOffset DisplayString
  fsGenRawValueBottom Integer32
  fsGenBottomOffset DisplayString
  fsGenInputES Integer32
  fsGenInputPoint Integer32
  fsGenFilterAveraging Integer32
  fsGenSysrepEnable DisplayString
  fsGenSysrepThreshold DisplayString
  fsGenSysrepLimit Integer32
  fsGenSysrepPackage Integer32
  fsGenSysrepType DisplayString

FuelSensorConfigTank  
SEQUENCE    
  fsTankIndex Integer32
  fsTankHeight DisplayString
  fsTankDimA DisplayString
  fsTankDimB DisplayString
  fsTankVolume DisplayString
  fsTankVolumeUnit DisplayString
  fsTankShape DisplayString

FuelSensorConfigCustomTankStrapping  
SEQUENCE    
  fsCustomTankIndexFS Integer32
  fsCustomTankIndexDatum Integer32
  fsCustomTankHeight DisplayString
  fsCustomTankVolume DisplayString

FuelSensorConfigVolume  
SEQUENCE    
  fsVolumeIndex Integer32
  fsVolumeEnable DisplayString
  fsVolumeDeadband DisplayString
  fsVolumeVHighValue DisplayString
  fsVolumeVHighActions DisplayString
  fsVolumeVHighTrapNum Integer32
  fsVolumeVHighClass DisplayString
  fsVolumeHighValue DisplayString
  fsVolumeHighActions DisplayString
  fsVolumeHighTrapNum Integer32
  fsVolumeHighClass DisplayString
  fsVolumeNormalActions DisplayString
  fsVolumeNormalTrapNum Integer32
  fsVolumeNormalClass DisplayString
  fsVolumeLowValue DisplayString
  fsVolumeLowActions DisplayString
  fsVolumeLowTrapNum Integer32
  fsVolumeLowClass DisplayString
  fsVolumeVLowValue DisplayString
  fsVolumeVLowActions DisplayString
  fsVolumeVLowTrapNum Integer32
  fsVolumeVLowClass DisplayString

FuelSensorConfigDisconnect  
SEQUENCE    
  fsDiscIndex Integer32
  fsDiscEnable DisplayString
  fsDiscHighValue Integer32
  fsDiscLowValue Integer32
  fsDiscActions DisplayString
  fsDiscTrapNum Integer32
  fsDiscClass DisplayString
  fsDiscNormalActions DisplayString
  fsDiscNormalTrapNum Integer32
  fsDiscNormalClass DisplayString

FuelSensorConfigSuddenChange  
SEQUENCE    
  fsSuddenChangeIndex Integer32
  fsSuddenChangeEnable DisplayString
  fsSuddenChangeTime Integer32
  fsSuddenChangeAmplitude DisplayString
  fsSuddenChangeActions DisplayString
  fsSuddenChangeTrapNum Integer32
  fsSuddenChangeClass DisplayString

FuelSensorConfigSlowChange  
SEQUENCE    
  fsSlowChangeIndex Integer32
  fsSlowChangeEnable DisplayString
  fsSlowChangeTime Integer32
  fsSlowChangeAmplitude DisplayString
  fsSlowChangeActions DisplayString
  fsSlowChangeTrapNum Integer32
  fsSlowChangeClass DisplayString

ACPMConfigGeneral  
SEQUENCE    
  acpmGenIndex Integer32
  acpmGenDevice DisplayString
  acpmGenName DisplayString
  acpmGenAddress Integer32
  acpmGenPtRatio Integer32
  acpmGenCtRatio Integer32
  acpmGenPowerType DisplayString
  acpmGenSysrepPackage Integer32
  acpmGenSysrepType DisplayString

ACPMConfigAvgVoltage  
SEQUENCE    
  acpmAvgVoltageIndex Integer32
  acpmAvgVoltageEnable DisplayString
  acpmAvgVoltageDeadband DisplayString
  acpmAvgVoltageVHighValue DisplayString
  acpmAvgVoltageVHighActions DisplayString
  acpmAvgVoltageVHighTrapNum Integer32
  acpmAvgVoltageVHighClass DisplayString
  acpmAvgVoltageHighValue DisplayString
  acpmAvgVoltageHighActions DisplayString
  acpmAvgVoltageHighTrapNum Integer32
  acpmAvgVoltageHighClass DisplayString
  acpmAvgVoltageNormalActions DisplayString
  acpmAvgVoltageNormalTrapNum Integer32
  acpmAvgVoltageNormalClass DisplayString
  acpmAvgVoltageLowValue DisplayString
  acpmAvgVoltageLowActions DisplayString
  acpmAvgVoltageLowTrapNum Integer32
  acpmAvgVoltageLowClass DisplayString
  acpmAvgVoltageVLowValue DisplayString
  acpmAvgVoltageVLowActions DisplayString
  acpmAvgVoltageVLowTrapNum Integer32
  acpmAvgVoltageVLowClass DisplayString
  acpmAvgVoltageSysrepEnable DisplayString
  acpmAvgVoltageSysrepThreshold DisplayString
  acpmAvgVoltageSysrepLimit Integer32

ACPMConfigAvgCurrent  
SEQUENCE    
  acpmAvgCurrentIndex Integer32
  acpmAvgCurrentEnable DisplayString
  acpmAvgCurrentDeadband DisplayString
  acpmAvgCurrentVHighValue DisplayString
  acpmAvgCurrentVHighActions DisplayString
  acpmAvgCurrentVHighTrapNum Integer32
  acpmAvgCurrentVHighClass DisplayString
  acpmAvgCurrentHighValue DisplayString
  acpmAvgCurrentHighActions DisplayString
  acpmAvgCurrentHighTrapNum Integer32
  acpmAvgCurrentHighClass DisplayString
  acpmAvgCurrentNormalActions DisplayString
  acpmAvgCurrentNormalTrapNum Integer32
  acpmAvgCurrentNormalClass DisplayString
  acpmAvgCurrentLowValue DisplayString
  acpmAvgCurrentLowActions DisplayString
  acpmAvgCurrentLowTrapNum Integer32
  acpmAvgCurrentLowClass DisplayString
  acpmAvgCurrentVLowValue DisplayString
  acpmAvgCurrentVLowActions DisplayString
  acpmAvgCurrentVLowTrapNum Integer32
  acpmAvgCurrentVLowClass DisplayString
  acpmAvgCurrentSysrepEnable DisplayString
  acpmAvgCurrentSysrepThreshold DisplayString
  acpmAvgCurrentSysrepLimit Integer32

ACPMConfigFreq  
SEQUENCE    
  acpmFreqIndex Integer32
  acpmFreqEnable DisplayString
  acpmFreqDeadband DisplayString
  acpmFreqVHighValue DisplayString
  acpmFreqVHighActions DisplayString
  acpmFreqVHighTrapNum Integer32
  acpmFreqVHighClass DisplayString
  acpmFreqHighValue DisplayString
  acpmFreqHighActions DisplayString
  acpmFreqHighTrapNum Integer32
  acpmFreqHighClass DisplayString
  acpmFreqNormalActions DisplayString
  acpmFreqNormalTrapNum Integer32
  acpmFreqNormalClass DisplayString
  acpmFreqLowValue DisplayString
  acpmFreqLowActions DisplayString
  acpmFreqLowTrapNum Integer32
  acpmFreqLowClass DisplayString
  acpmFreqVLowValue DisplayString
  acpmFreqVLowActions DisplayString
  acpmFreqVLowTrapNum Integer32
  acpmFreqVLowClass DisplayString
  acpmFreqSysrepEnable DisplayString
  acpmFreqSysrepThreshold DisplayString
  acpmFreqSysrepLimit Integer32

ACPMConfigTRP  
SEQUENCE    
  acpmTRPIndex Integer32
  acpmTRPEnable DisplayString
  acpmTRPDeadband DisplayString
  acpmTRPVHighValue DisplayString
  acpmTRPVHighActions DisplayString
  acpmTRPVHighTrapNum Integer32
  acpmTRPVHighClass DisplayString
  acpmTRPHighValue DisplayString
  acpmTRPHighActions DisplayString
  acpmTRPHighTrapNum Integer32
  acpmTRPHighClass DisplayString
  acpmTRPNormalActions DisplayString
  acpmTRPNormalTrapNum Integer32
  acpmTRPNormalClass DisplayString
  acpmTRPLowValue DisplayString
  acpmTRPLowActions DisplayString
  acpmTRPLowTrapNum Integer32
  acpmTRPLowClass DisplayString
  acpmTRPVLowValue DisplayString
  acpmTRPVLowActions DisplayString
  acpmTRPVLowTrapNum Integer32
  acpmTRPVLowClass DisplayString
  acpmTRPSysrepEnable DisplayString
  acpmTRPSysrepThreshold DisplayString
  acpmTRPSysrepLimit Integer32

ACPMConfigDisconnect  
SEQUENCE    
  acpmDisconnectIndex Integer32
  acpmDisconnectEnable DisplayString
  acpmDisconnectActions DisplayString
  acpmDisconnectTrapNum Integer32
  acpmDisconnectClass DisplayString
  acpmDisconnectNormalActions DisplayString
  acpmDisconnectNormalTrapNum Integer32
  acpmDisconnectNormalClass DisplayString

ACPMConfigTotalPowerFactor  
SEQUENCE    
  acpmTPFIndex Integer32
  acpmTPFEnable DisplayString
  acpmTPFDeadband DisplayString
  acpmTPFNormalActions DisplayString
  acpmTPFNormalTrapNum Integer32
  acpmTPFNormalClass DisplayString
  acpmTPFLowValue DisplayString
  acpmTPFLowActions DisplayString
  acpmTPFLowTrapNum Integer32
  acpmTPFLowClass DisplayString
  acpmTPFVLowValue DisplayString
  acpmTPFVLowActions DisplayString
  acpmTPFVLowTrapNum Integer32
  acpmTPFVLowClass DisplayString
  acpmTPFSysrepEnable DisplayString
  acpmTPFSysrepThreshold DisplayString
  acpmTPFSysrepLimit Integer32

BatteryMonitorConfigGeneral  
SEQUENCE    
  bmGenIndex Integer32
  bmGenEnable DisplayString
  bmGenName DisplayString
  bmGenBatteryQuantity Integer32
  bmGenBatteryCapacity Integer32
  bmGenBatteryNominalVoltage DisplayString
  bmGenSysrepPackage Integer32
  bmGenSysrepType DisplayString

BatteryMonitorConfigDevice  
SEQUENCE    
  bmDeviceIndex Integer32
  bmDeviceType DisplayString
  bmDeviceES Integer32
  bmDeviceIP IpAddress
  bmDeviceReadcom DisplayString
  bmDeviceInputString Integer32
  bmDeviceCTSize Integer32

BatteryMonitorConfigTemp  
SEQUENCE    
  bmTempIndex Integer32
  bmTempEnable DisplayString
  bmTempDeadband DisplayString
  bmTempScale DisplayString
  bmTempHighValue DisplayString
  bmTempHighActions DisplayString
  bmTempHighTrapNum Integer32
  bmTempHighClass DisplayString
  bmTempNormalActions DisplayString
  bmTempNormalTrapNum Integer32
  bmTempNormalClass DisplayString
  bmTempLowValue DisplayString
  bmTempLowActions DisplayString
  bmTempLowTrapNum Integer32
  bmTempLowClass DisplayString
  bmTempSysrepEnable DisplayString
  bmTempSysrepThreshold DisplayString
  bmTempSysrepLimit Integer32

BatteryMonitorConfigDiffTemp  
SEQUENCE    
  bmDiffTempIndex Integer32
  bmDiffTempEnable DisplayString
  bmDiffTempDeadband Integer32
  bmDiffTempVHighValue Integer32
  bmDiffTempVHighActions DisplayString
  bmDiffTempVHighTrapNum Integer32
  bmDiffTempVHighClass DisplayString
  bmDiffTempHighValue Integer32
  bmDiffTempHighActions DisplayString
  bmDiffTempHighTrapNum Integer32
  bmDiffTempHighClass DisplayString
  bmDiffTempNormalActions DisplayString
  bmDiffTempNormalTrapNum Integer32
  bmDiffTempNormalClass DisplayString
  bmDiffTempSysrepEnable DisplayString
  bmDiffTempSysrepThreshold Integer32
  bmDiffTempSysrepLimit Integer32

BatteryMonitorConfigVoltage  
SEQUENCE    
  bmVoltageIndex Integer32
  bmVoltageEnable DisplayString
  bmVoltageDeadband DisplayString
  bmVoltageVHighValue DisplayString
  bmVoltageVHighActions DisplayString
  bmVoltageVHighTrapNum Integer32
  bmVoltageVHighClass DisplayString
  bmVoltageHighValue DisplayString
  bmVoltageHighActions DisplayString
  bmVoltageHighTrapNum Integer32
  bmVoltageHighClass DisplayString
  bmVoltageNormalActions DisplayString
  bmVoltageNormalTrapNum Integer32
  bmVoltageNormalClass DisplayString
  bmVoltageLowValue DisplayString
  bmVoltageLowActions DisplayString
  bmVoltageLowTrapNum Integer32
  bmVoltageLowClass DisplayString
  bmVoltageVLowValue DisplayString
  bmVoltageVLowActions DisplayString
  bmVoltageVLowTrapNum Integer32
  bmVoltageVLowClass DisplayString
  bmVoltageSysrepEnable DisplayString
  bmVoltageSysrepThreshold DisplayString
  bmVoltageSysrepLimit Integer32

BatteryMonitorConfigDiffVolt  
SEQUENCE    
  bmDiffVoltIndex Integer32
  bmDiffVoltEnable DisplayString
  bmDiffVoltDeadband DisplayString
  bmDiffVoltVHighValue DisplayString
  bmDiffVoltVHighActions DisplayString
  bmDiffVoltVHighTrapNum Integer32
  bmDiffVoltVHighClass DisplayString
  bmDiffVoltHighValue DisplayString
  bmDiffVoltHighActions DisplayString
  bmDiffVoltHighTrapNum Integer32
  bmDiffVoltHighClass DisplayString
  bmDiffVoltNormalActions DisplayString
  bmDiffVoltNormalTrapNum Integer32
  bmDiffVoltNormalClass DisplayString
  bmDiffVoltSysrepEnable DisplayString
  bmDiffVoltSysrepThreshold DisplayString
  bmDiffVoltSysrepLimit Integer32

BatteryMonitorConfigChargingCurrent  
SEQUENCE    
  bmChargingCurrentIndex Integer32
  bmChargingCurrentEnable DisplayString
  bmChargingCurrentDeadband DisplayString
  bmChargingCurrentVHighValue DisplayString
  bmChargingCurrentVHighActions DisplayString
  bmChargingCurrentVHighTrapNum Integer32
  bmChargingCurrentVHighClass DisplayString
  bmChargingCurrentHighValue DisplayString
  bmChargingCurrentHighActions DisplayString
  bmChargingCurrentHighTrapNum Integer32
  bmChargingCurrentHighClass DisplayString
  bmChargingCurrentNormalActions DisplayString
  bmChargingCurrentNormalTrapNum Integer32
  bmChargingCurrentNormalClass DisplayString
  bmChargingCurrentSysrepEnable DisplayString
  bmChargingCurrentSysrepThreshold DisplayString
  bmChargingCurrentSysrepLimit Integer32

BatteryMonitorConfigDischargingCurrent  
SEQUENCE    
  bmDischargingCurrentIndex Integer32
  bmDischargingCurrentEnable DisplayString
  bmDischargingCurrentDeadband DisplayString
  bmDischargingCurrentVHighValue DisplayString
  bmDischargingCurrentVHighActions DisplayString
  bmDischargingCurrentVHighTrapNum Integer32
  bmDischargingCurrentVHighClass DisplayString
  bmDischargingCurrentHighValue DisplayString
  bmDischargingCurrentHighActions DisplayString
  bmDischargingCurrentHighTrapNum Integer32
  bmDischargingCurrentHighClass DisplayString
  bmDischargingCurrentNormalActions DisplayString
  bmDischargingCurrentNormalTrapNum Integer32
  bmDischargingCurrentNormalClass DisplayString
  bmDischargingCurrentSysrepEnable DisplayString
  bmDischargingCurrentSysrepThreshold DisplayString
  bmDischargingCurrentSysrepLimit Integer32

BatteryMonitorConfigChargeLevel  
SEQUENCE    
  bmChargeLevelIndex Integer32
  bmChargeLevelEnable DisplayString
  bmChargeLevelNormalActions DisplayString
  bmChargeLevelNormalTrapNum Integer32
  bmChargeLevelNormalClass DisplayString
  bmChargeLevelLowActions DisplayString
  bmChargeLevelLowTrapNum Integer32
  bmChargeLevelLowClass DisplayString
  bmChargeLevelVLowActions DisplayString
  bmChargeLevelVLowTrapNum Integer32
  bmChargeLevelVLowClass DisplayString
  bmChargeLevelSysrepEnable DisplayString

BatteryMonitorConfigJarHealth  
SEQUENCE    
  bmJarHealthIndex Integer32
  bmJarHealthEnable DisplayString
  bmJarHealthNormalActions DisplayString
  bmJarHealthNormalTrapNum Integer32
  bmJarHealthNormalClass DisplayString
  bmJarHealthLowActions DisplayString
  bmJarHealthLowTrapNum Integer32
  bmJarHealthLowClass DisplayString
  bmJarHealthVLowActions DisplayString
  bmJarHealthVLowTrapNum Integer32
  bmJarHealthVLowClass DisplayString
  bmJarHealthSysrepEnable DisplayString

BMStatus  
SEQUENCE    
  bmsIndex Integer32
  bmsEnable DisplayString
  bmsName DisplayString
  bmsState DisplayString
  bmsStringState DisplayString
  bmsTempValue DisplayString
  bmsTempValueStr DisplayString
  bmsTempEvent DisplayString
  bmsDiffTempValue Integer32
  bmsDiffTempValueStr DisplayString
  bmsDiffTempEvent DisplayString
  bmsVoltageValue DisplayString
  bmsVoltageEvent DisplayString
  bmsDiffVoltValue DisplayString
  bmsDiffVoltEvent DisplayString
  bmsCurrentValue DisplayString
  bmsChargingCurrentEvent DisplayString
  bmsDischargingCurrentEvent DisplayString
  bmsChargeLevelValue DisplayString
  bmsChargeLevelEvent DisplayString
  bmsJarHealthValue DisplayString
  bmsJarHealthEvent DisplayString
  bmsCombined DisplayString

BMJarStatus  
SEQUENCE    
  bmjsIndexBM Integer32
  bmjsIndexJar Integer32
  bmjsVoltageValue DisplayString
  bmjsTempValue DisplayString
  bmjsAdmittanceValue Integer32
  bmjsAdmittanceChangeValue Integer32

Defined Values

s450 1.3.6.1.4.1.3052.17
MIB module for managing Asentria SiteBoss 450
MODULE-IDENTITY    

s450notifications 1.3.6.1.4.1.3052.17.0
OBJECT IDENTIFIER    

status 1.3.6.1.4.1.3052.17.1
OBJECT IDENTIFIER    

eventSensorStatus 1.3.6.1.4.1.3052.17.1.1
OBJECT IDENTIFIER    

dataEventStatus 1.3.6.1.4.1.3052.17.1.2
OBJECT IDENTIFIER    

fuelSensorStatus 1.3.6.1.4.1.3052.17.1.6
OBJECT IDENTIFIER    

wirelessModemStatus 1.3.6.1.4.1.3052.17.1.7
OBJECT IDENTIFIER    

acPowerMonitorStatus 1.3.6.1.4.1.3052.17.1.8
OBJECT IDENTIFIER    

batteryMonitorStatus 1.3.6.1.4.1.3052.17.1.10
OBJECT IDENTIFIER    

config 1.3.6.1.4.1.3052.17.2
OBJECT IDENTIFIER    

eventSensorBasics 1.3.6.1.4.1.3052.17.2.1
OBJECT IDENTIFIER    

eventSensorPointConfig 1.3.6.1.4.1.3052.17.2.2
OBJECT IDENTIFIER    

serialPorts 1.3.6.1.4.1.3052.17.2.3
OBJECT IDENTIFIER    

network 1.3.6.1.4.1.3052.17.2.4
OBJECT IDENTIFIER    

interface 1.3.6.1.4.1.3052.17.2.4.1
OBJECT IDENTIFIER    

ethernet 1.3.6.1.4.1.3052.17.2.4.1.1
OBJECT IDENTIFIER    

ethernet1 1.3.6.1.4.1.3052.17.2.4.1.1.1
OBJECT IDENTIFIER    

eth1VLAN 1.3.6.1.4.1.3052.17.2.4.1.1.1.5
OBJECT IDENTIFIER    

eth1VLAN1 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.1
OBJECT IDENTIFIER    

eth1VLAN2 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.2
OBJECT IDENTIFIER    

eth1VLAN3 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.3
OBJECT IDENTIFIER    

eth1VLAN4 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.4
OBJECT IDENTIFIER    

eth1VLAN5 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.5
OBJECT IDENTIFIER    

eth1VLAN6 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.6
OBJECT IDENTIFIER    

ethernet2 1.3.6.1.4.1.3052.17.2.4.1.1.2
OBJECT IDENTIFIER    

eth2VLAN 1.3.6.1.4.1.3052.17.2.4.1.1.2.5
OBJECT IDENTIFIER    

eth2VLAN1 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.1
OBJECT IDENTIFIER    

eth2VLAN2 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.2
OBJECT IDENTIFIER    

eth2VLAN3 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.3
OBJECT IDENTIFIER    

eth2VLAN4 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.4
OBJECT IDENTIFIER    

eth2VLAN5 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.5
OBJECT IDENTIFIER    

eth2VLAN6 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.6
OBJECT IDENTIFIER    

snmp 1.3.6.1.4.1.3052.17.2.4.8
OBJECT IDENTIFIER    

snmpNotificationTx 1.3.6.1.4.1.3052.17.2.4.8.7
OBJECT IDENTIFIER    

snmpProxy 1.3.6.1.4.1.3052.17.2.4.8.8
OBJECT IDENTIFIER    

snmpPoll 1.3.6.1.4.1.3052.17.2.4.8.9
OBJECT IDENTIFIER    

ftpPush 1.3.6.1.4.1.3052.17.2.4.9
OBJECT IDENTIFIER    

routing 1.3.6.1.4.1.3052.17.2.4.11
OBJECT IDENTIFIER    

netSecurity 1.3.6.1.4.1.3052.17.2.4.12
OBJECT IDENTIFIER    

ipRestriction 1.3.6.1.4.1.3052.17.2.4.12.1
OBJECT IDENTIFIER    

rts 1.3.6.1.4.1.3052.17.2.4.13
OBJECT IDENTIFIER    

rtsAlarms 1.3.6.1.4.1.3052.17.2.4.13.2
OBJECT IDENTIFIER    

trap 1.3.6.1.4.1.3052.17.2.4.14
OBJECT IDENTIFIER    

trapInclude 1.3.6.1.4.1.3052.17.2.4.14.1
OBJECT IDENTIFIER    

wireless 1.3.6.1.4.1.3052.17.2.4.16
OBJECT IDENTIFIER    

email 1.3.6.1.4.1.3052.17.2.4.17
OBJECT IDENTIFIER    

netAdvanced 1.3.6.1.4.1.3052.17.2.4.18
OBJECT IDENTIFIER    

web 1.3.6.1.4.1.3052.17.2.4.19
OBJECT IDENTIFIER    

time 1.3.6.1.4.1.3052.17.2.8
OBJECT IDENTIFIER    

console 1.3.6.1.4.1.3052.17.2.10
OBJECT IDENTIFIER    

unitSecurity 1.3.6.1.4.1.3052.17.2.11
OBJECT IDENTIFIER    

secCore 1.3.6.1.4.1.3052.17.2.11.1
OBJECT IDENTIFIER    

secFactory 1.3.6.1.4.1.3052.17.2.11.3
OBJECT IDENTIFIER    

event 1.3.6.1.4.1.3052.17.2.12
OBJECT IDENTIFIER    

evCore 1.3.6.1.4.1.3052.17.2.12.1
OBJECT IDENTIFIER    

evLog 1.3.6.1.4.1.3052.17.2.12.1.3
OBJECT IDENTIFIER    

evMgmt 1.3.6.1.4.1.3052.17.2.12.1.4
OBJECT IDENTIFIER    

evSched1 1.3.6.1.4.1.3052.17.2.12.5
OBJECT IDENTIFIER    

evSched2 1.3.6.1.4.1.3052.17.2.12.6
OBJECT IDENTIFIER    

evNoSensor 1.3.6.1.4.1.3052.17.2.12.9
OBJECT IDENTIFIER    

fuelSensor 1.3.6.1.4.1.3052.17.2.12.11
OBJECT IDENTIFIER    

acPowerMonitor 1.3.6.1.4.1.3052.17.2.12.12
OBJECT IDENTIFIER    

batteryMonitor 1.3.6.1.4.1.3052.17.2.12.14
OBJECT IDENTIFIER    

evReset 1.3.6.1.4.1.3052.17.2.12.16
OBJECT IDENTIFIER    

evGlobal 1.3.6.1.4.1.3052.17.2.12.18
OBJECT IDENTIFIER    

action 1.3.6.1.4.1.3052.17.2.14
OBJECT IDENTIFIER    

actionSched 1.3.6.1.4.1.3052.17.2.14.3
OBJECT IDENTIFIER    

actionAsentria 1.3.6.1.4.1.3052.17.2.14.4
OBJECT IDENTIFIER    

sys 1.3.6.1.4.1.3052.17.2.16
OBJECT IDENTIFIER    

sysTime 1.3.6.1.4.1.3052.17.2.16.1
OBJECT IDENTIFIER    

sysTimeNet 1.3.6.1.4.1.3052.17.2.16.1.4
OBJECT IDENTIFIER    

sysPT 1.3.6.1.4.1.3052.17.2.16.2
OBJECT IDENTIFIER    

sysTimeStamp 1.3.6.1.4.1.3052.17.2.16.8
OBJECT IDENTIFIER    

sysLog 1.3.6.1.4.1.3052.17.2.16.9
OBJECT IDENTIFIER    

sysCRDB 1.3.6.1.4.1.3052.17.2.16.10
OBJECT IDENTIFIER    

sysLoc 1.3.6.1.4.1.3052.17.2.16.14
OBJECT IDENTIFIER    

sysFileTransfer 1.3.6.1.4.1.3052.17.2.16.17
OBJECT IDENTIFIER    

sysUpdate 1.3.6.1.4.1.3052.17.2.16.18
OBJECT IDENTIFIER    

auditLog 1.3.6.1.4.1.3052.17.2.17
OBJECT IDENTIFIER    

scripting 1.3.6.1.4.1.3052.17.2.18
OBJECT IDENTIFIER    

generator 1.3.6.1.4.1.3052.17.2.19
OBJECT IDENTIFIER    

genSet 1.3.6.1.4.1.3052.17.2.19.1
OBJECT IDENTIFIER    

genSetRelay 1.3.6.1.4.1.3052.17.2.19.1.2
OBJECT IDENTIFIER    

genSetCC 1.3.6.1.4.1.3052.17.2.19.1.3
OBJECT IDENTIFIER    

genRun 1.3.6.1.4.1.3052.17.2.19.2
OBJECT IDENTIFIER    

genRunNonstartEvent 1.3.6.1.4.1.3052.17.2.19.2.7
OBJECT IDENTIFIER    

calendar 1.3.6.1.4.1.3052.17.2.20
OBJECT IDENTIFIER    

productIds 1.3.6.1.4.1.3052.17.3
OBJECT IDENTIFIER    

esPointTable 1.3.6.1.4.1.3052.17.1.1.1
This table organizes 4 basic attributes of points. A point is a particular sensor on an EventSensor (e.g., temperature, humidity, contact closure 2, relay 5, etc.). The 4 point attributes are its name, whether it's in its event state, the point's value as a number and its value as a string. Points are referenced by a point index. The point index is a string of 3 numbers separated by periods. It contains all the information necessary for getting a piece of data off an event sensor; namely, which EventSensor, point class, and which-sensor-of-that-class (a.k.a. point).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ESPoint

esPointEntry 1.3.6.1.4.1.3052.17.1.1.1.1
Entry for EventSensor point table
Status: current Access: not-accessible
OBJECT-TYPE    
  ESPoint  

esIndexES 1.3.6.1.4.1.3052.17.1.1.1.1.1
The part of the point index that refers to an EventSensor. The point index is a string of 3 numbers separated by periods. It contains all the information necessary for getting a piece of data off an event sensor; namely, which EventSensor, point class, and which-sensor-of-that-class (a.k.a. point). This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors. The number corresponding to an EventSensor is determined by the user at the initial configuration time. If there is an internal sensor in the unit, it will always be the first item in the Sensor Events setup menu. For example, if a new EventSensor is configured as the 2nd entry AFTER the internal EventSensor (if one exists) in the Sensor Events Setup Menu, then that EventSensor will be known from then on as EventSensor 2. All point indeces with esIndexES=2 will now refer to that particular EventSensor.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..200  

esIndexPC 1.3.6.1.4.1.3052.17.1.1.1.1.2
The part of the point index that refers to point class. The point index is a string of 3 numbers separated by periods. It contains all the information necessary for getting a piece of data off an event sensor; namely, which EventSensor, point class, and which-sensor-of-that-class (a.k.a. point). The values for this object are: 1=temperature sensor 2=contact closure 3=humidity sensor 4=noise sensor 5=analog input 6=relay
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

esIndexPoint 1.3.6.1.4.1.3052.17.1.1.1.1.3
The part of the point index that delineates which sensor on the EventSensor. So this combined with esIndexPC (Point Class or type) and esIndexES (which EventSensor) uniquely defines each point (sensor or relay) attached to a unit. For example, if esIndexES is 3, esIndexPC is 1 and esIndexPoint is 4 then this is the Fourth Temperature Sensor on EventSensor number 3.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..64  

esPointName 1.3.6.1.4.1.3052.17.1.1.1.1.4
The name of the point on an EventSensor. For example, 'AC temp' (in the case of the temperature sensor on an EventSensor). There can be multiple points of the same point class on an EventSensor (e.g., 8 contact closures) and multiple sensor classes on an EventSensor (e.g., temperature, contact closure, humidity). If the point referenced by a given point index is solitary (e.g., temperature sensor, because there can be only one on an EventSensor), then this object reads as ''. Setting this object for solitary point indices sets the EventSensor name only. On the other hand, if a given point is among other points of the same point class on an EventSensor, then this object reads as ''. Setting this object for these NON- solitary point indices sets the sensor name only - not the EventSensor name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

esPointInEventState 1.3.6.1.4.1.3052.17.1.1.1.1.5
A number referring to the event state of a point on an EventSensor. This number can have different meanings depending on the point class. If the point class is temperature, humidity, or analog input, then the values of this object are: 1=very low 2=low 3=normal 4=high 5=very high For contact closures the values of this object are: 1=point in event state 2=point in normal state For relays the values of this object are: 1=relay energized (active) 2=relay de-energized (inactive) For any point class and any point, if the event state is undefined, then the value of this object is 0. For any point class except relay, this object is read-only. For relays, setting this object to 1 puts the relay into its active (energized) state. Setting it to 2 puts the relay into its inactive (de-energized) state. Setting it to any value greater than 2 puts the relay into its active state for that many seconds (up to 3600), after which time it puts the relay into its inactive state.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

esPointValueInt 1.3.6.1.4.1.3052.17.1.1.1.1.6
A read-only number referring to the value of a point on an EventSensor. If the point class is temperature, then this object is the temperature in its configured scale (default is Fahrenheit). If the point class is contact closure or relay, then this object is either 0 (open) or 1 (closed). If the point class is humidity, then this object is the percent relative humidity. If the point class is analog input, then this object is the signed input value in tenths of the configured units. If the point class is relay, then this object is either 1 (active a.k.a. energized) or 0 (inactive a.k.a. de-energized). This object cannot be used to control the relay (use esPointInEventState for that).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

esPointValueStr 1.3.6.1.4.1.3052.17.1.1.1.1.7
A string referring to the value of a point on an EventSensor. For contact closures this object is either 'Open' or 'Closed'. For relays this object is either 'Active' (energized) or 'Inactive' (de-energized). For temperature and humidity point classes, this object is the string representation of the esPointValueInt object. For temperature, 'C' or 'F' is including in the string to indicate scale. For analog inputs, this object is the string representation of the plus/minus input in the configured units appended with the unit name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esPointTimeLastChange 1.3.6.1.4.1.3052.17.1.1.1.1.8
The time of the last time an event was triggerred for a point on an EventSensor in MM/DD/YY HH:MM:SS format. For contact closures, the possible events are Active and Inactive. For temperature, humidity, and analog inputs, the possible events are Normal, High, Very High, Low, and Very Low. For relays, this object is a null string.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esPointTimetickLastChange 1.3.6.1.4.1.3052.17.1.1.1.1.9
The time of the last time an event was triggerred for a point on an EventSensor in 100ths of seconds since reset. For contact closures, the possible events are Active and Inactive. For temperature, humidity, and analog inputs, the possible events are Normal, High, Very High, Low, and Very Low. For relays, this object is 0.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

esPointAliasValueStr 1.3.6.1.4.1.3052.17.1.1.1.1.10
For CC inputs, this is the CC active/inactive alias setting setting value that currently corresponds to the event state. So if the CC input is in the event state, then this object is the active alias setting value. If the CC input is in the normal state, then this object is the inactive alias setting value. For relay/power outputs, this is the output active/inactive alias setting value that currently corresponds to the output state. So if the output is in the active state, then this object is the active alias setting value. If the output is in hte inactive state, then this object is the inactive alias setting value. For non-CC and non-output sensors, this is the same as the esPointValueStr object.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

deStatusTable 1.3.6.1.4.1.3052.17.1.2.1
Data Event Status Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DEStatus

deStatusEntry 1.3.6.1.4.1.3052.17.1.2.1.1
EventSensor status entry
Status: current Access: not-accessible
OBJECT-TYPE    
  DEStatus  

deStatusIndex 1.3.6.1.4.1.3052.17.1.2.1.1.1
Index for Data Events
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..100  

deStatusName 1.3.6.1.4.1.3052.17.1.2.1.1.2
Data Event name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

deStatusCounter 1.3.6.1.4.1.3052.17.1.2.1.1.3
Number of times a data record has matched this event's equation. Range: 1-999999999
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

deStatusThreshold 1.3.6.1.4.1.3052.17.1.2.1.1.4
Number of times the equation is matched before an event is triggered. Range: 1-999999999
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fsStatusTable 1.3.6.1.4.1.3052.17.1.6.1
Fuel sensor status table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FSStatus

fsStatusEntry 1.3.6.1.4.1.3052.17.1.6.1.1
Fuel sensor status table entry
Status: current Access: not-accessible
OBJECT-TYPE    
  FSStatus  

fsStatusIndex 1.3.6.1.4.1.3052.17.1.6.1.1.1
Index for fuel sensors
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..3  

fsStatusName 1.3.6.1.4.1.3052.17.1.6.1.1.2
Fuel sensor name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

fsStatusDeviceState 1.3.6.1.4.1.3052.17.1.6.1.1.3
Fuel sensor device state
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

fsStatusVolumeValueString 1.3.6.1.4.1.3052.17.1.6.1.1.4
Fuel volume. Range is -2,147,483,648 to 2,147,483,647. This value reads -999 when the fuel sensor is disconnected
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

fsStatusVolumePercentLevel 1.3.6.1.4.1.3052.17.1.6.1.1.7
Height of the fluid in the tank expressed as a percentage of the tank height, in hundredths of a percent.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

fsStatusVolumeInEventState 1.3.6.1.4.1.3052.17.1.6.1.1.8
Current event status of the fuel sensor.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

fsStatusCombined 1.3.6.1.4.1.3052.17.1.6.1.1.9
Combined status string intended to be parsed by NMS: deviceState`deviceStateColorCode`percentRounded`valueAsFloat`volumeEventState`volumeEventStateColorCode`capacity`units`name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsStatus 1.3.6.1.4.1.3052.17.1.7.1
Wireless modem status
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsSignal 1.3.6.1.4.1.3052.17.1.7.2
Wireless modem Signal strength
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsRSSI 1.3.6.1.4.1.3052.17.1.7.3
Wireless modem Signal strength (RSSI)
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsBER 1.3.6.1.4.1.3052.17.1.7.4
Wireless modem Bit Error Rate
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsUpdated 1.3.6.1.4.1.3052.17.1.7.5
Wireless modem info last update time
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsRegistration 1.3.6.1.4.1.3052.17.1.7.6
Wireless modem registration status
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsLAC 1.3.6.1.4.1.3052.17.1.7.7
Wireless modem Location Area Code
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsCellID 1.3.6.1.4.1.3052.17.1.7.8
Wireless modem Cell ID
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsIMSI 1.3.6.1.4.1.3052.17.1.7.9
Wireless modem Internation Mobile Subscriber Identity number
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsPhnum 1.3.6.1.4.1.3052.17.1.7.10
Wireless modem phone number
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsLocalIP 1.3.6.1.4.1.3052.17.1.7.11
Local IP address of modem on wireless network
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsMgfID 1.3.6.1.4.1.3052.17.1.7.12
Wireless modem manufacturer ID
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsModelID 1.3.6.1.4.1.3052.17.1.7.13
Wireless modem model ID
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsIMEI 1.3.6.1.4.1.3052.17.1.7.14
Wireless modem International Mobile Equipment Identity number
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsRevID 1.3.6.1.4.1.3052.17.1.7.15
Wireless modem revision ID
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsNetName 1.3.6.1.4.1.3052.17.1.7.16
Wireless modem network name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsGPRSStatus 1.3.6.1.4.1.3052.17.1.7.17
Wireless modem (E)GPRS status
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsBand 1.3.6.1.4.1.3052.17.1.7.18
Wireless modem band
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsChannel 1.3.6.1.4.1.3052.17.1.7.19
Wireless modem channel
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsCountryCode 1.3.6.1.4.1.3052.17.1.7.20
Wireless modem country code
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsNetCode 1.3.6.1.4.1.3052.17.1.7.21
Wireless modem network code
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsPLMNColor 1.3.6.1.4.1.3052.17.1.7.22
Wireless modem PLMN color
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsBScolor 1.3.6.1.4.1.3052.17.1.7.23
Wireless modem BS color
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsMpRACH 1.3.6.1.4.1.3052.17.1.7.24
Wireless modem max power RACH
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsMinRxLevel 1.3.6.1.4.1.3052.17.1.7.25
Wireless modem minimum receive level
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsBaseCoeff 1.3.6.1.4.1.3052.17.1.7.26
Wireless modem base coefficient
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsSIMStatus 1.3.6.1.4.1.3052.17.1.7.27
WWireless modem SIM status
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsICCID 1.3.6.1.4.1.3052.17.1.7.28
Wireless modem SIM ICCID
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsModemType 1.3.6.1.4.1.3052.17.1.7.29
Wireless modem type
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmStatusTable 1.3.6.1.4.1.3052.17.1.8.1
AC power monitor status table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ACPMStatus

acpmStatusEntry 1.3.6.1.4.1.3052.17.1.8.1.1
AC power monitor status table entry
Status: current Access: not-accessible
OBJECT-TYPE    
  ACPMStatus  

acpmsIndex 1.3.6.1.4.1.3052.17.1.8.1.1.1
Index for AC power monitors
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

acpmsName 1.3.6.1.4.1.3052.17.1.8.1.1.2
Name for the AC power monitor device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgVoltageValueStr 1.3.6.1.4.1.3052.17.1.8.1.1.3
Average voltage, in volts. This is calculated using the formula (register * PT ratio * 0.1). This could be either the average of the phase voltages, or the sum of the phase voltages, depending on device configuration.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgVoltageMinStr 1.3.6.1.4.1.3052.17.1.8.1.1.4
Minimum average voltage value since last reset, in volts.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgVoltageMaxStr 1.3.6.1.4.1.3052.17.1.8.1.1.5
Maximum average voltage value since last reset, in volts.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgVoltageAvgStr 1.3.6.1.4.1.3052.17.1.8.1.1.6
Average average voltage value since last reset, in volts. This is the unit's average of its measurements of the average voltage reported by the AC power monitor device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgVoltageInEventState 1.3.6.1.4.1.3052.17.1.8.1.1.7
Event state of this AC power monitor voltage (Low, Normal, High, etc.).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsVoltagePhaseAValueStr 1.3.6.1.4.1.3052.17.1.8.1.1.8
Phase A voltage, in volts. This is calculated using the formula (register * PT ratio * 0.1).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsVoltagePhaseBValueStr 1.3.6.1.4.1.3052.17.1.8.1.1.9
Phase B voltage, in volts. This is calculated using the formula (register * PT ratio * 0.1).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsVoltagePhaseCValueStr 1.3.6.1.4.1.3052.17.1.8.1.1.10
Phase C voltage, in volts. This is calculated using the formula (register * PT ratio * 0.1).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgCurrentValueStr 1.3.6.1.4.1.3052.17.1.8.1.1.11
Average current, in amps. This is calculated using the formula (register * CT ratio * 0.001). This could be either the average of the phase currents, or the sum of the phase currents, depending on device configuration.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgCurrentMinStr 1.3.6.1.4.1.3052.17.1.8.1.1.12
Minimum average current value since last reset, in amps.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgCurrentMaxStr 1.3.6.1.4.1.3052.17.1.8.1.1.13
Maximum average current value since last reset, in amps.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgCurrentAvgStr 1.3.6.1.4.1.3052.17.1.8.1.1.14
Average average current value since last reset, in amps. This is the unit's average of its measurements of the average current reported by the AC power monitor device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgCurrentInEventState 1.3.6.1.4.1.3052.17.1.8.1.1.15
Event state of this AC power monitor current (Low, Normal, High, etc.).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsCurrentPhaseAValueStr 1.3.6.1.4.1.3052.17.1.8.1.1.16
Phase A current, in amps. This is calculated using the formula (register * CT ratio * 0.001).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsCurrentPhaseBValueStr 1.3.6.1.4.1.3052.17.1.8.1.1.17
Phase B current, in amps. This is calculated using the formula (register * CT ratio * 0.001).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsCurrentPhaseCValueStr 1.3.6.1.4.1.3052.17.1.8.1.1.18
Phase C current, in amps. This is calculated using the formula (register * CT ratio * 0.001).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgFreqValueStr 1.3.6.1.4.1.3052.17.1.8.1.1.19
Frequency, in hertz. On the YD2010, this is calculated using the formula (register * 0.00106813). On the WattsOn, this is calculated using the formula (register * 0.1).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgFreqMinStr 1.3.6.1.4.1.3052.17.1.8.1.1.20
Minimum frequency value since last reset, in hertz.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgFreqMaxStr 1.3.6.1.4.1.3052.17.1.8.1.1.21
Maximum frequency value since last reset, in hertz.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgFreqAvgStr 1.3.6.1.4.1.3052.17.1.8.1.1.22
Average frequency value since last reset, in hertz. This is the unit's average of its measurements of the average frequency reported by the AC power monitor device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgFreqInEventState 1.3.6.1.4.1.3052.17.1.8.1.1.23
Event state of this AC power monitor frequency (Low, Normal, High, etc.).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTRPValueStr 1.3.6.1.4.1.3052.17.1.8.1.1.24
Total real power, in watts. On the YD2010, this is calculated using the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is the voltage range taken from register 0x30A. On the WattsOn models, this is calculated using the formula (register * PT * CT).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTRPMinStr 1.3.6.1.4.1.3052.17.1.8.1.1.25
Minimum total real power value since last reset, in watts.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTRPMaxStr 1.3.6.1.4.1.3052.17.1.8.1.1.26
Maximum total real power value since last reset, in watts.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTRPAvgStr 1.3.6.1.4.1.3052.17.1.8.1.1.27
Average total real power value since last reset, in watts. This is the unit's average of its measurements of the average total real power reported by the AC power monitor device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTRPInEventState 1.3.6.1.4.1.3052.17.1.8.1.1.28
Event state of this AC power monitor total real power (Low, Normal, High, etc.).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsRPPhaseAValueStr 1.3.6.1.4.1.3052.17.1.8.1.1.29
Phase A real power, in watts. On the YD2010, this is calculated using the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is the voltage range taken from register 0x30A. On the WattsOn, this is calculated using the formula (register * PT * CT).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsRPPhaseBValueStr 1.3.6.1.4.1.3052.17.1.8.1.1.30
Phase B real power, in watts. On the YD2010, this is calculated using the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is the voltage range taken from register 0x30A. On the WattsOn, this is calculated using the formula (register * PT * CT).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsRPPhaseCValueStr 1.3.6.1.4.1.3052.17.1.8.1.1.31
Phase C real power, in watts. On the YD2010, this is calculated using the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is the voltage range taken from register 0x30A. On the WattsOn, this is calculated using the formula (register * PT * CT).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsCombined 1.3.6.1.4.1.3052.17.1.8.1.1.32
Combined status string intended to be parsed by NMS: name`deviceState`deviceStateColorCode`voltage`current`frequency`power~voltageEventState`voltageColorCode`currentEventState`currentColorCode`frequencyEventState`frequencyColorCode`powerEventState`powerColorCode
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTPFValueStr 1.3.6.1.4.1.3052.17.1.8.1.1.33
Total power factor.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTPFMinStr 1.3.6.1.4.1.3052.17.1.8.1.1.34
Total power factor minimum value since last reset.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTPFMaxStr 1.3.6.1.4.1.3052.17.1.8.1.1.35
Total power factor maximum value since last reset.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTPFAvgStr 1.3.6.1.4.1.3052.17.1.8.1.1.36
Total power factor average value since last reset.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTPFInEventState 1.3.6.1.4.1.3052.17.1.8.1.1.37
Total power factor event state.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsPFPhaseAValueStr 1.3.6.1.4.1.3052.17.1.8.1.1.38
Phase A power factor.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsPFPhaseBValueStr 1.3.6.1.4.1.3052.17.1.8.1.1.39
Phase B power factor.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsPFPhaseCValueStr 1.3.6.1.4.1.3052.17.1.8.1.1.40
Phase C power factor.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTRcPValueStr 1.3.6.1.4.1.3052.17.1.8.1.1.41
Total reactive power, in VAR.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTRcPMinStr 1.3.6.1.4.1.3052.17.1.8.1.1.42
Total reactive power minimum value since last reset, in VAR.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTRcPMaxStr 1.3.6.1.4.1.3052.17.1.8.1.1.43
Total reactive power maximum value since last reset, in VAR.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTRcPAvgStr 1.3.6.1.4.1.3052.17.1.8.1.1.44
Total reactive power average value since last reset, in VAR.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsRcPPhaseAValueStr 1.3.6.1.4.1.3052.17.1.8.1.1.45
Phase A reactive power, in VAR.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsRcPPhaseBValueStr 1.3.6.1.4.1.3052.17.1.8.1.1.46
Phase B reactive power, in VAR.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsRcPPhaseCValueStr 1.3.6.1.4.1.3052.17.1.8.1.1.47
Phase C reactive power, in VAR.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTAPValueStr 1.3.6.1.4.1.3052.17.1.8.1.1.48
Total apparent power, in VA.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTAPMinStr 1.3.6.1.4.1.3052.17.1.8.1.1.49
Total apparent power minimum value since last reset, in VA.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTAPMaxStr 1.3.6.1.4.1.3052.17.1.8.1.1.50
Total apparent power maximum value since last reset, in VA.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTAPAvgStr 1.3.6.1.4.1.3052.17.1.8.1.1.51
Total apparent power average value since last reset, in VA.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAPPhaseAValueStr 1.3.6.1.4.1.3052.17.1.8.1.1.52
Phase A apparent power, in VA.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAPPhaseBValueStr 1.3.6.1.4.1.3052.17.1.8.1.1.53
Phase B apparent power, in VA.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAPPhaseCValueStr 1.3.6.1.4.1.3052.17.1.8.1.1.54
Phase C apparent power, in VA.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTotalEnergyWh 1.3.6.1.4.1.3052.17.1.8.1.1.55
Total energy, in Wh.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acpmsTotalEnergyVAR 1.3.6.1.4.1.3052.17.1.8.1.1.56
Total reactive energy, in VAR.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acpmsTotalEnergyVA 1.3.6.1.4.1.3052.17.1.8.1.1.57
Total apparent energy, in VA.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

bmStatusTable 1.3.6.1.4.1.3052.17.1.10.1
Battery monitor status table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BMStatus

bmStatusEntry 1.3.6.1.4.1.3052.17.1.10.1.1
Battery monitor status table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  BMStatus  

bmsIndex 1.3.6.1.4.1.3052.17.1.10.1.1.1
Index for battery monitors.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..9  

bmsEnable 1.3.6.1.4.1.3052.17.1.10.1.1.2
ON/OFF enable for this battery monitor.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

bmsName 1.3.6.1.4.1.3052.17.1.10.1.1.3
Name for this battery monitor.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

bmsState 1.3.6.1.4.1.3052.17.1.10.1.1.4
The connected state of the battery monitor. If you unplug the carrier then all three of its battery monitor states will reflect the same state change.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

bmsStringState 1.3.6.1.4.1.3052.17.1.10.1.1.5
State of the string monitored by its battery monitor.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

bmsTempValue 1.3.6.1.4.1.3052.17.1.10.1.1.6
Average jar temperature value in C or F, depending on scale setting. Displayed as a floating point value. -999.0 means this is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

bmsTempValueStr 1.3.6.1.4.1.3052.17.1.10.1.1.7
Average jar temperature with appropriate scale appended. Displayed as a floating point value. -999.0 means this is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

bmsTempEvent 1.3.6.1.4.1.3052.17.1.10.1.1.8
Event state of this battery monitor average jar temperature (Low, Normal, High).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

bmsDiffTempValue 1.3.6.1.4.1.3052.17.1.10.1.1.9
Differential temperature in C or F, depending on scale setting. -999 means this is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

bmsDiffTempValueStr 1.3.6.1.4.1.3052.17.1.10.1.1.10
Differential temperature with appropriate scale (C or F) appended. -999 means this is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

bmsDiffTempEvent 1.3.6.1.4.1.3052.17.1.10.1.1.11
Event state of this battery monitor differential temperature (Very High, High, Normal).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

bmsVoltageValue 1.3.6.1.4.1.3052.17.1.10.1.1.12
Total battery voltage on the string, in volts. Displayed as a floating point value in format X.X. -999.0 means this is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

bmsVoltageEvent 1.3.6.1.4.1.3052.17.1.10.1.1.13
Event state of this battery monitor string voltage (Low, Normal, High, etc.).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

bmsDiffVoltValue 1.3.6.1.4.1.3052.17.1.10.1.1.14
Differential voltage in volts. Displayed as a floating point value in format X.X. -999.0 means this is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

bmsDiffVoltEvent 1.3.6.1.4.1.3052.17.1.10.1.1.15
Event state of this battery monitor differential voltage (Very High, High, Normal.)
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

bmsCurrentValue 1.3.6.1.4.1.3052.17.1.10.1.1.16
Current flow on the string, in amperes. Displayed as a floating point value in format X.X. A positive value means the battery string is charging, and a negative value means the battery string is discharging. -999.0 means this is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

bmsChargingCurrentEvent 1.3.6.1.4.1.3052.17.1.10.1.1.17
Event state of this battery monitor charging current (Low, Normal, High, etc.).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

bmsDischargingCurrentEvent 1.3.6.1.4.1.3052.17.1.10.1.1.18
Event state of this battery monitor discharging current (Low, Normal, High, etc.).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

bmsChargeLevelValue 1.3.6.1.4.1.3052.17.1.10.1.1.19
Charge level of the battery string.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

bmsChargeLevelEvent 1.3.6.1.4.1.3052.17.1.10.1.1.20
Event state of this battery monitor charge level (Very Low, Low, Normal).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

bmsJarHealthValue 1.3.6.1.4.1.3052.17.1.10.1.1.21
Jar health of the battery string.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

bmsJarHealthEvent 1.3.6.1.4.1.3052.17.1.10.1.1.22
Event state of this battery monitor jar health (Very Low, Low, Normal).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

bmsCombined 1.3.6.1.4.1.3052.17.1.10.1.1.23
Combined status string intended to be parsed by NMS: name`deviceState`deviceStateColorCode`stringState`charge`voltage`temp`health~chargeEventState`chargeColorCode`voltageEventState`voltageColorCode`tempEventState`tempColorCode`healthEventState`healthColorCode`numActiveEvents
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

bmsJarStatusTable 1.3.6.1.4.1.3052.17.1.10.2
This table organizes per-jar attributes of a battery monitor: 1. voltage 2. temperature.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BMJarStatus

bmJarStatusEntry 1.3.6.1.4.1.3052.17.1.10.2.1
Entry for battery monitor jar status table. Note this table uses 2 SNMP indexes: the first for which battery monitor and the second for which jar.
Status: current Access: not-accessible
OBJECT-TYPE    
  BMJarStatus  

bmjsIndexBM 1.3.6.1.4.1.3052.17.1.10.2.1.1
The part of the index that refers to which battery monitor.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..9  

bmjsIndexJar 1.3.6.1.4.1.3052.17.1.10.2.1.2
The part of the index that refers to which jar.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..12  

bmjsVoltageValue 1.3.6.1.4.1.3052.17.1.10.2.1.3
Voltage of individual battery cell. This is a floating point value in format X.X. -999.0 means this is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

bmjsTempValue 1.3.6.1.4.1.3052.17.1.10.2.1.4
Temperature of individual battery jar. This is a floating point value. -999.0 means unknown.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

bmjsAdmittanceValue 1.3.6.1.4.1.3052.17.1.10.2.1.5
Cell admittance of individual jar. This is an integer value. -999 means unknown.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

bmjsAdmittanceChangeValue 1.3.6.1.4.1.3052.17.1.10.2.1.6
Percent change of cell admittance of individual jar. This is an integer value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

esNumberEventSensors 1.3.6.1.4.1.3052.17.2.1.1
The number of EventSensors recognized by the unit, including the internal EventSensor. Range: 1-17
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

esTable 1.3.6.1.4.1.3052.17.2.1.2
The table of what EventSensors are attached to the unit, including the internal EventSensor
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ESExist

esEntry 1.3.6.1.4.1.3052.17.2.1.2.1
Table entry for EventSensor table
Status: current Access: not-accessible
OBJECT-TYPE    
  ESExist  

esIndex 1.3.6.1.4.1.3052.17.2.1.2.1.1
This number refers to an EventSensor; it has the same meaning as the esIndexES object (see above), except that this object is used only within the esTable branch. This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors. The number corresponding to an EventSensor is determined by the user at the initial configuration time. If there is an internal sensor in the unit, it will always be the first item in the Sensor Events setup menu. For example, if a new EventSensor is configured as the 2nd entry AFTER the internal EventSensor (if one exists) in the Sensor Events Setup Menu, then that EventSensor will be known from then on as EventSensor 2. All point indeces with esIndex=2 will now refer to that particular EventSensor.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..200  

esName 1.3.6.1.4.1.3052.17.2.1.2.1.2
The name of the EventSensor
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esID 1.3.6.1.4.1.3052.17.2.1.2.1.3
The factory-assigned ID of the EventSensor
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esNumberTempSensors 1.3.6.1.4.1.3052.17.2.1.2.1.4
The number of temperature sensors on the EventSensor
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

esTempReportingMode 1.3.6.1.4.1.3052.17.2.1.2.1.5
Description of how temperature values should be interpreted.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esNumberCCs 1.3.6.1.4.1.3052.17.2.1.2.1.6
The number of contact closures on the EventSensor.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

esCCReportingMode 1.3.6.1.4.1.3052.17.2.1.2.1.7
Description of how CC values should be interpreted.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esNumberHumidSensors 1.3.6.1.4.1.3052.17.2.1.2.1.8
The number of humidity sensors on the EventSensor.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

esHumidReportingMode 1.3.6.1.4.1.3052.17.2.1.2.1.9
Description of how humidity sensor values should be interpreted.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esNumberNoiseSensors 1.3.6.1.4.1.3052.17.2.1.2.1.10
The number of noise sensors on the EventSensor.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

esNoiseReportingMode 1.3.6.1.4.1.3052.17.2.1.2.1.11
Description of how noise sensor values should be interpreted.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esNumberAirflowSensors 1.3.6.1.4.1.3052.17.2.1.2.1.12
The number of airflow sensors on the EventSensor.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

esAirflowReportingMode 1.3.6.1.4.1.3052.17.2.1.2.1.13
Description of how airflow sensor values should be interpreted.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esNumberAnalog 1.3.6.1.4.1.3052.17.2.1.2.1.14
The number of analog inputs on the EventSensor.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

esAnalogReportingMode 1.3.6.1.4.1.3052.17.2.1.2.1.15
Description of how analog input values should be interpreted.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esNumberRelayOutputs 1.3.6.1.4.1.3052.17.2.1.2.1.16
The number of relay outputs on the EventSensor
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

esRelayReportingMode 1.3.6.1.4.1.3052.17.2.1.2.1.17
Description of how relay output values should be interpreted.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esTempCombinedStatus 1.3.6.1.4.1.3052.17.2.1.2.1.18
Combined status string intended to be parsed by NMS: name`value`scale`eventState`eventColorCode
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esCCCombinedStatusBlock1 1.3.6.1.4.1.3052.17.2.1.2.1.19
Combined status string intended to be parsed by NMS: numInBlock~name1`value1`eventColorCode1`alias1~name2`value2`eventColorCode2`alias2~...name8`value8`eventColorCode8`alias8
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esCCCombinedStatusBlock2 1.3.6.1.4.1.3052.17.2.1.2.1.20
Combined status string intended to be parsed by NMS: numInBlock~name9`value9`eventColorCode9`alias9~name10`value10`eventColorCode10`alias10~...name16`value16`eventColorCode16`alias16
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esCCCombinedStatusBlock3 1.3.6.1.4.1.3052.17.2.1.2.1.21
Combined status string intended to be parsed by NMS: numInBlock~name17`value17`eventColorCode17`alias17~name18`value18`eventColorCode18`alias18~...name24`value24`eventColorCode24`alias24
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esCCCombinedStatusBlock4 1.3.6.1.4.1.3052.17.2.1.2.1.22
Combined status string intended to be parsed by NMS: numInBlock~name25`value25`eventColorCode25`alias25~name26`value26`eventColorCode26`alias26~...name32`value32`eventColorCode32`alias32
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esCCCombinedStatusBlock5 1.3.6.1.4.1.3052.17.2.1.2.1.23
Combined status string intended to be parsed by NMS: numInBlock~name33`value33`eventColorCode33`alias33~name34`value34`eventColorCode34`alias35~...name40`value40`eventColorCode40`alias40
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esCCCombinedStatusBlock6 1.3.6.1.4.1.3052.17.2.1.2.1.24
Combined status string intended to be parsed by NMS: numInBlock~name41`value41`eventColorCode41`alias41~name42`value42`eventColorCode42`alias43~...name48`value48`eventColorCode48`alias48
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esCCCombinedStatusBlock7 1.3.6.1.4.1.3052.17.2.1.2.1.25
Combined status string intended to be parsed by NMS: numInBlock~name49`value49`eventColorCode49`alias49~name50`value50`eventColorCode50`alias50~...name56`value56`eventColorCode56`alias56
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esCCCombinedStatusBlock8 1.3.6.1.4.1.3052.17.2.1.2.1.26
Combined status string intended to be parsed by NMS: numInBlock~name57`value57`eventColorCode57`alias57~name57`value57`eventColorCode564`alias57~...name64`value64`eventColorCode64`alias64
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esHumidCombinedStatus 1.3.6.1.4.1.3052.17.2.1.2.1.27
Combined status string intended to be parsed by NMS: name`value`eventState`eventColorCode
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esAnalogCombinedStatusBlock1 1.3.6.1.4.1.3052.17.2.1.2.1.28
Combined status string intended to be parsed by NMS: numInBlock~name1`value1`units1`eventState`eventColorCode1~name2`value2`units2`eventState`eventColorCode2~...
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esAnalogCombinedStatusBlock2 1.3.6.1.4.1.3052.17.2.1.2.1.29
Combined status string intended to be parsed by NMS: numInBlock~name9`value9`units9`eventState9`eventColorCode9~...
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esAnalogCombinedStatusBlock3 1.3.6.1.4.1.3052.17.2.1.2.1.30
Combined status string intended to be parsed by NMS: numInBlock~namex`valuex`unitsx`eventStatex`eventColorCodex~...
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esAnalogCombinedStatusBlock4 1.3.6.1.4.1.3052.17.2.1.2.1.31
Combined status string intended to be parsed by NMS: numInBlock~namex`valuex`unitsx`eventStatex`eventColorCodex~...
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esAnalogCombinedStatusBlock5 1.3.6.1.4.1.3052.17.2.1.2.1.32
Combined status string intended to be parsed by NMS: numInBlock~namex`valuex`unitsx`eventStatex`eventColorCodex~...
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esAnalogCombinedStatusBlock6 1.3.6.1.4.1.3052.17.2.1.2.1.33
Combined status string intended to be parsed by NMS: numInBlock~namex`valuex`unitsx`eventStatex`eventColorCodex~...
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esOutputCombinedStatusBlock1 1.3.6.1.4.1.3052.17.2.1.2.1.34
Combined status string intended to be parsed by NMS: numInBlock~namex`valuex`unitsx`eventStatex`eventColorCodex~...
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esOutputCombinedStatusBlock2 1.3.6.1.4.1.3052.17.2.1.2.1.35
Combined status string intended to be parsed by NMS: numInBlock`namex`valuex`aliasx~namey`valuey`aliasy~...namez`valuez`aliasz
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esNewSensors 1.3.6.1.4.1.3052.17.2.1.3
String representing the number of new (attached but unconfigured) EventSensors
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esPointConfigTempTable 1.3.6.1.4.1.3052.17.2.2.1
This table organizes 3 basic attributes of temperature sensor points. A point is a particular sensor on an EventSensor. The 3 point attributes organizes in this table are: 1. the configuration item (e.g., enable, name, etc.) 2. the eventsensor on which this point resides 3. the point number (always 1 for temp sensors) Points are referenced by a point config index. The point config index is a string of 2 numbers separated by periods. It contains all the information necessary for getting a piece of data off an event sensor within the context of this emperature point config table ; namely, which EventSensor, and which sensor (a.k.a. point) (always 1 for temperature sensors).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ESPointConfigTemp

esPointConfigTempEntry 1.3.6.1.4.1.3052.17.2.2.1.1
Entry for EventSensor point config temperature table
Status: current Access: not-accessible
OBJECT-TYPE    
  ESPointConfigTemp  

espcTempIndexES 1.3.6.1.4.1.3052.17.2.2.1.1.1
The part of the point index that refers to an EventSensor. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the the context of the eventsensor point config temperature table; namely, which EventSensor, and which sensor (a.k.a. point). This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors. The number corresponding to an EventSensor is determined by the user at the initial configuration time. If there is an internal sensor in the unit, it will always be the first item in the Sensor Events setup menu. For example, if a new EventSensor is configured as the 2nd entry AFTER the internal EventSensor (if one exists) in the Sensor Events Setup Menu, then that EventSensor will be known from then on as EventSensor 2. All point indeces with esIndexES=2 will now refer to that particular EventSensor.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..200  

espcTempIndexPoint 1.3.6.1.4.1.3052.17.2.2.1.1.2
The part of the point index that delineates which sensor on the EventSensor. So this combined with espcTempIndexES (which EventSensor) uniquely defines each point attached to a unit within the context of temperature point configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..64  

espcTempEnable 1.3.6.1.4.1.3052.17.2.2.1.1.3
ON/OFF enable this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempScale 1.3.6.1.4.1.3052.17.2.2.1.1.4
Scale (C/F) for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempDeadband 1.3.6.1.4.1.3052.17.2.2.1.1.5
Deadband for this temperature sensor (in floating-point format)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempVHighTemp 1.3.6.1.4.1.3052.17.2.2.1.1.6
Very high temperature event threshold for this temperature sensor (in floating-point format)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempVHighActions 1.3.6.1.4.1.3052.17.2.2.1.1.7
Very high temperature event actions for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempVHighTrapnum 1.3.6.1.4.1.3052.17.2.2.1.1.8
Very high temperature event trap number for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcTempVHighClass 1.3.6.1.4.1.3052.17.2.2.1.1.9
Very high temperature event class for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempHighTemp 1.3.6.1.4.1.3052.17.2.2.1.1.10
High temperature event threshold for this temperature sensor (in floating-point format)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempHighActions 1.3.6.1.4.1.3052.17.2.2.1.1.11
High temperature event actions for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempHighTrapnum 1.3.6.1.4.1.3052.17.2.2.1.1.12
High temperature event trap number for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcTempHighClass 1.3.6.1.4.1.3052.17.2.2.1.1.13
High temperature event class for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempNormalActions 1.3.6.1.4.1.3052.17.2.2.1.1.14
Return-to-normal event actions for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempNormalTrapnum 1.3.6.1.4.1.3052.17.2.2.1.1.15
Return-to-normal event trap number for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcTempNormalClass 1.3.6.1.4.1.3052.17.2.2.1.1.16
Return-to-normal event class for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempLowTemp 1.3.6.1.4.1.3052.17.2.2.1.1.17
Low temperature event threshold for this temperature sensor (in floating-point format)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempLowActions 1.3.6.1.4.1.3052.17.2.2.1.1.18
Low temperature event actions for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempLowTrapnum 1.3.6.1.4.1.3052.17.2.2.1.1.19
Low temperature event trap number for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcTempLowClass 1.3.6.1.4.1.3052.17.2.2.1.1.20
Low temperature event class for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempVLowTemp 1.3.6.1.4.1.3052.17.2.2.1.1.21
Very Low temperature event threshold for this temperature sensor (in floating-point format)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempVLowActions 1.3.6.1.4.1.3052.17.2.2.1.1.22
Very Low temperature event actions for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempVLowTrapnum 1.3.6.1.4.1.3052.17.2.2.1.1.23
Very Low temperature event trap number for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcTempVLowClass 1.3.6.1.4.1.3052.17.2.2.1.1.24
Very Low temperature event class for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

esPointConfigCCTable 1.3.6.1.4.1.3052.17.2.2.2
This table organizes 3 basic attributes of contact closure points. A point is a particular sensor on an EventSensor. The 3 point attributes organizes in this table are: 1. the configuration item (e.g., enable, name, etc.) 2. the eventsensor on which this point resides 3. the point number Points are referenced by a point config index. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the context of this contact closure point config table ; namely, which EventSensor and which sensor.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ESPointConfigCC

esPointConfigCCEntry 1.3.6.1.4.1.3052.17.2.2.2.1
Entry for EventSensor point config contact closure table
Status: current Access: not-accessible
OBJECT-TYPE    
  ESPointConfigCC  

espcCCIndexES 1.3.6.1.4.1.3052.17.2.2.2.1.1
The part of the point index that refers to an EventSensor. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the the context of the eventsensor point config contact closure table; namely, which EventSensor and which sensor (a.k.a. point). This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..200  

espcCCIndexPoint 1.3.6.1.4.1.3052.17.2.2.2.1.2
The part of the point index that delineates which sensor on the EventSensor. So this combined with espcCCIndexES (which EventSensor) uniquely defines each point attached to a unit within the context of contact closure point configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..64  

espcCCEnable 1.3.6.1.4.1.3052.17.2.2.2.1.3
ON/OFF enable for this contact closure
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcCCName 1.3.6.1.4.1.3052.17.2.2.2.1.4
Name for this contact closure
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcCCEventState 1.3.6.1.4.1.3052.17.2.2.2.1.5
Event state for this contact closure
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcCCThreshold 1.3.6.1.4.1.3052.17.2.2.2.1.6
Event threshold (seconds) for this contact closure
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

espcCCEventActions 1.3.6.1.4.1.3052.17.2.2.2.1.7
Event actions for this contact closure
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcCCEventTrapnum 1.3.6.1.4.1.3052.17.2.2.2.1.8
Event trap number for this contact closure
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcCCEventClass 1.3.6.1.4.1.3052.17.2.2.2.1.9
Event class for this contact closure
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcCCNormalActions 1.3.6.1.4.1.3052.17.2.2.2.1.10
Return-to-normal actions for this contact closure
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcCCNormalTrapnum 1.3.6.1.4.1.3052.17.2.2.2.1.11
Return-to-normal trap number for this contact closure
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcCCNormalClass 1.3.6.1.4.1.3052.17.2.2.2.1.12
Return-to-normal class for this contact closure
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcCCAlarmAlias 1.3.6.1.4.1.3052.17.2.2.2.1.13
Event alias for this contact closure
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcCCNormalAlias 1.3.6.1.4.1.3052.17.2.2.2.1.14
Return-to-normal alias for this contact closure
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcCCNormalThreshold 1.3.6.1.4.1.3052.17.2.2.2.1.15
Event threshold (seconds) for this contact closure to return to normal
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

esPointConfigHumidTable 1.3.6.1.4.1.3052.17.2.2.3
This table organizes 3 basic attributes of humidity points. A point is a particular sensor on an EventSensor. The 3 point attributes organizes in this table are: 1. the configuration item (e.g., enable, name, etc.) 2. the eventsensor on which this point resides 3. the point number (always 1 for humidity sensors) Points are referenced by a point config index. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the context of this humidity point config table ; namely, which EventSensor and which sensor.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ESPointConfigHumid

esPointConfigHumidEntry 1.3.6.1.4.1.3052.17.2.2.3.1
Entry for EventSensor point config humidity table
Status: current Access: not-accessible
OBJECT-TYPE    
  ESPointConfigHumid  

espcHumidIndexES 1.3.6.1.4.1.3052.17.2.2.3.1.1
The part of the point index that refers to an EventSensor. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the the context of the eventsensor point config contact closure table; namely, which EventSensor and which sensor (a.k.a. point). This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..200  

espcHumidIndexPoint 1.3.6.1.4.1.3052.17.2.2.3.1.2
The part of the point index that delineates which sensor on the EventSensor. So this combined with espcHumidIndexES (which EventSensor) uniquely defines each point attached to a unit within the context of contact closure point configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..64  

espcHumidEnable 1.3.6.1.4.1.3052.17.2.2.3.1.3
ON/OFF enable for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcHumidDeadband 1.3.6.1.4.1.3052.17.2.2.3.1.4
Deadband for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcHumidVHighHumid 1.3.6.1.4.1.3052.17.2.2.3.1.5
Very high event threshold for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcHumidVHighActions 1.3.6.1.4.1.3052.17.2.2.3.1.6
Very high event actions for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcHumidVHighTrapnum 1.3.6.1.4.1.3052.17.2.2.3.1.7
Very high event trap number for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcHumidVHighClass 1.3.6.1.4.1.3052.17.2.2.3.1.8
Very high event class for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcHumidHighHumid 1.3.6.1.4.1.3052.17.2.2.3.1.9
High event threshold for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcHumidHighActions 1.3.6.1.4.1.3052.17.2.2.3.1.10
High event actions for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcHumidHighTrapnum 1.3.6.1.4.1.3052.17.2.2.3.1.11
High event trap number for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcHumidHighClass 1.3.6.1.4.1.3052.17.2.2.3.1.12
High event class for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcHumidNormalActions 1.3.6.1.4.1.3052.17.2.2.3.1.13
Return-to-normal actions for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcHumidNormalTrapnum 1.3.6.1.4.1.3052.17.2.2.3.1.14
Return-to-normal trap number for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcHumidNormalClass 1.3.6.1.4.1.3052.17.2.2.3.1.15
Return-to-normal class for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcHumidLowHumid 1.3.6.1.4.1.3052.17.2.2.3.1.16
Low event threshold for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcHumidLowActions 1.3.6.1.4.1.3052.17.2.2.3.1.17
Low event actions for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcHumidLowTrapnum 1.3.6.1.4.1.3052.17.2.2.3.1.18
Low event trap number for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcHumidLowClass 1.3.6.1.4.1.3052.17.2.2.3.1.19
Low event class for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcHumidVLowHumid 1.3.6.1.4.1.3052.17.2.2.3.1.20
Very low event threshold for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcHumidVLowActions 1.3.6.1.4.1.3052.17.2.2.3.1.21
Very low event actions for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcHumidVLowTrapnum 1.3.6.1.4.1.3052.17.2.2.3.1.22
Very low event trap number for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcHumidVLowClass 1.3.6.1.4.1.3052.17.2.2.3.1.23
Very low event class for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

esPointConfigAITable 1.3.6.1.4.1.3052.17.2.2.5
This table organizes 3 basic attributes of analog input points. A point is a particular sensor on an EventSensor. The 3 point attributes organizes in this table are: 1. the configuration item (e.g., enable, name, etc.) 2. the eventsensor on which this point resides 3. the point number Points are referenced by a point config index. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the context of this analog input point config table ; namely, which EventSensor and which sensor.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ESPointConfigAnalogInput

esPointConfigAIEntry 1.3.6.1.4.1.3052.17.2.2.5.1
Entry for EventSensor point config analog input table
Status: current Access: not-accessible
OBJECT-TYPE    
  ESPointConfigAnalogInput  

espcAIIndexES 1.3.6.1.4.1.3052.17.2.2.5.1.1
The part of the point index that refers to an EventSensor. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the the context of the eventsensor point config contact closure table; namely, which EventSensor and which sensor (a.k.a. point). This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..200  

espcAIIndexPoint 1.3.6.1.4.1.3052.17.2.2.5.1.2
The part of the point index that delineates which sensor on the EventSensor. So this combined with espcAIIndexES (which EventSensor) uniquely defines each point attached to a unit within the context of contact closure point configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..64  

espcAIEnable 1.3.6.1.4.1.3052.17.2.2.5.1.3
ON/OFF for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAIPolarity 1.3.6.1.4.1.3052.17.2.2.5.1.4
Polarity for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAIDeadband 1.3.6.1.4.1.3052.17.2.2.5.1.5
Deadband for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcAIVhighValue 1.3.6.1.4.1.3052.17.2.2.5.1.6
Very high event threshold (decivolts or tenths of milliamps) for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcAIVhighActions 1.3.6.1.4.1.3052.17.2.2.5.1.7
Very high event actions for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAIVhighTrapnum 1.3.6.1.4.1.3052.17.2.2.5.1.8
Very high event trap number for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcAIVhighClass 1.3.6.1.4.1.3052.17.2.2.5.1.9
Very high event class for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAIHighValue 1.3.6.1.4.1.3052.17.2.2.5.1.10
High event threshold (decivolts or tenths of milliamps) for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcAIHighActions 1.3.6.1.4.1.3052.17.2.2.5.1.11
High event actions for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAIHighTrapnum 1.3.6.1.4.1.3052.17.2.2.5.1.12
High event trap number for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcAIHighClass 1.3.6.1.4.1.3052.17.2.2.5.1.13
High event class for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAINormalActions 1.3.6.1.4.1.3052.17.2.2.5.1.14
Return-to-normal actions for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAINormalTrapnum 1.3.6.1.4.1.3052.17.2.2.5.1.15
Return-to-normal trap number for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcAINormalClass 1.3.6.1.4.1.3052.17.2.2.5.1.16
Return-to-normal class for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAILowValue 1.3.6.1.4.1.3052.17.2.2.5.1.17
Low event threshold (decivolts or tenths of milliamps) for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcAILowActions 1.3.6.1.4.1.3052.17.2.2.5.1.18
Low event actions for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAILowTrapnum 1.3.6.1.4.1.3052.17.2.2.5.1.19
Low event trap number for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcAILowClass 1.3.6.1.4.1.3052.17.2.2.5.1.20
Low event class for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAIVlowValue 1.3.6.1.4.1.3052.17.2.2.5.1.21
Very low event threshold (decivolts or tenths of milliamps) for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcAIVlowActions 1.3.6.1.4.1.3052.17.2.2.5.1.22
Very low event actions for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAIVlowTrapnum 1.3.6.1.4.1.3052.17.2.2.5.1.23
Very low event actions for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcAIVlowClass 1.3.6.1.4.1.3052.17.2.2.5.1.24
Very low event class for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAIConvUnitName 1.3.6.1.4.1.3052.17.2.2.5.1.25
Converstion unit name for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAIConvHighValue 1.3.6.1.4.1.3052.17.2.2.5.1.26
Conversion high value for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcAIConvHighUnit 1.3.6.1.4.1.3052.17.2.2.5.1.27
Conversion high unit value for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcAIConvHighSign 1.3.6.1.4.1.3052.17.2.2.5.1.28
Conversion high sign for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAIConvLowValue 1.3.6.1.4.1.3052.17.2.2.5.1.29
Conversion low value for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcAIConvLowUnit 1.3.6.1.4.1.3052.17.2.2.5.1.30
Conversion unit low unit value for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcAIConvLowSign 1.3.6.1.4.1.3052.17.2.2.5.1.31
Conversion low sign for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

numberPorts 1.3.6.1.4.1.3052.17.2.3.1
Number of RS-232 ports found. Range: 2 or 4
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

portConfigTable 1.3.6.1.4.1.3052.17.2.3.2
Port config table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortConfig

portConfigEntry 1.3.6.1.4.1.3052.17.2.3.2.1
Port config entry
Status: current Access: not-accessible
OBJECT-TYPE    
  PortConfig  

portConfigIndex 1.3.6.1.4.1.3052.17.2.3.2.1.1
Index for ports
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16  

portConfigBaud 1.3.6.1.4.1.3052.17.2.3.2.1.2
Baud rate, 19200, 9600, etc.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portConfigDataFormat 1.3.6.1.4.1.3052.17.2.3.2.1.3
Value representing word length, parity, and stop bits: 0=8N1, 1=7E1, 2=7O1, 3=7N1, 4=8O2
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portConfigStripPtOutputLfs 1.3.6.1.4.1.3052.17.2.3.2.1.4
Strip passthrough LFs sent to device on this port: 1=yes, 0=no.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portConfigStripPtInputLfs 1.3.6.1.4.1.3052.17.2.3.2.1.5
Strip passthrough LFs received from device on this port: 1=yes, 0=no.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portConfigMaskEnable 1.3.6.1.4.1.3052.17.2.3.2.1.7
1=Use the character mask on this port. 0=Do not use the mask. When the mask is enabled, the following ASCII characters are ignored on the port: 0, 1, 4-9, 11, 12, 14-31, 128-255. When the mask is disabled, all characters are accepted on the port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portConfigDAEnable 1.3.6.1.4.1.3052.17.2.3.2.1.8
1=Enable the Data Alarm Evaluator for data on this port. 0=Do not evaluate data on this port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portConfigStoreAlarmsDPT 1.3.6.1.4.1.3052.17.2.3.2.1.9
ON/OFF: store alarms received during passthrough
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

portConfigRecordTimeout 1.3.6.1.4.1.3052.17.2.3.2.1.10
Timeout after last unterminated data received upon which data collected so far is stored as a record.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portConfigDataType 1.3.6.1.4.1.3052.17.2.3.2.1.11
How the port interprets incoming data: ASCII/BINARY
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

portConfigEtxToCRLF 1.3.6.1.4.1.3052.17.2.3.2.1.12
ON/OFF whether the port translates incoming ETX to CRLF
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

portConfigMLREnable 1.3.6.1.4.1.3052.17.2.3.2.1.13
ON/OFF Whether Multiline Records are collected on this port.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

portConfigMLRStartField1Pos 1.3.6.1.4.1.3052.17.2.3.2.1.14
Position of MLR start field 1
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portConfigMLRStartField1Text 1.3.6.1.4.1.3052.17.2.3.2.1.15
Text to match MLR start field 1
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

portConfigMLRStartField2Pos 1.3.6.1.4.1.3052.17.2.3.2.1.16
Position of MLR start field 2
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portConfigMLRStartField2Text 1.3.6.1.4.1.3052.17.2.3.2.1.17
Text to match MLR start field 2
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

portConfigMLRNumLinesBefore 1.3.6.1.4.1.3052.17.2.3.2.1.18
Number of lines before the starting line which should be included in the MLR
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portConfigMLREndDetection 1.3.6.1.4.1.3052.17.2.3.2.1.19
How the MLR parser determines what ends an MLR: by FORMULA, number of lines received so far (COUNT), or number of blank lines received so far (BLANKS)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

portConfigMLRLineCount 1.3.6.1.4.1.3052.17.2.3.2.1.20
Number of lines in the MLR (used by the end detection mode)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portConfigMLREndField1Pos 1.3.6.1.4.1.3052.17.2.3.2.1.21
Position of MLR end field 1
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portConfigMLREndField1Text 1.3.6.1.4.1.3052.17.2.3.2.1.22
Text to match MLR end field 1
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

portConfigMLREndField2Pos 1.3.6.1.4.1.3052.17.2.3.2.1.23
Position of MLR end field 2
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portConfigMLREndField2Text 1.3.6.1.4.1.3052.17.2.3.2.1.24
Text to match MLR end field 2
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

portConfigMLRUseComplexRules 1.3.6.1.4.1.3052.17.2.3.2.1.25
ON/OFF MLR parser uses complex rules (field possitions/ formulas, etc.)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

portConfigBufferPT 1.3.6.1.4.1.3052.17.2.3.2.1.26
ON/OFF records received during passthrough mode are buffered/stored in the database
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

portConfigId 1.3.6.1.4.1.3052.17.2.3.2.1.27
The text identifer for the port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

eth1Mode 1.3.6.1.4.1.3052.17.2.4.1.1.1.1
Mode of the Ethernet1 interface: STATIC,DHCP,VLAN
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

eth1Address 1.3.6.1.4.1.3052.17.2.4.1.1.1.2
Ethernet1 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1SubnetMask 1.3.6.1.4.1.3052.17.2.4.1.1.1.3
Ethernet1 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1Router 1.3.6.1.4.1.3052.17.2.4.1.1.1.4
Ethernet1 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN1ID 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.1.1
Ethernet1 VLAN1 ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth1VLAN1Priority 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.1.2
Ethernet1 VLAN1 priority
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth1VLAN1Address 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.1.3
Ethernet1 VLAN1 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN1SubnetMask 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.1.4
Ethernet1 VLAN1 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN1Router 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.1.5
Ethernet1 VLAN1 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN2ID 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.2.1
Ethernet1 VLAN2 ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth1VLAN2Priority 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.2.2
Ethernet1 VLAN2 priority
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth1VLAN2Address 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.2.3
Ethernet1 VLAN2 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN2SubnetMask 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.2.4
Ethernet1 VLAN2 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN2Router 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.2.5
Ethernet1 VLAN2 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN3ID 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.3.1
Ethernet1 VLAN3 ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth1VLAN3Priority 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.3.2
Ethernet1 VLAN3 priority
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth1VLAN3Address 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.3.3
Ethernet1 VLAN3 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN3SubnetMask 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.3.4
Ethernet1 VLAN3 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN3Router 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.3.5
Ethernet1 VLAN3 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN4ID 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.4.1
Ethernet1 VLAN4 ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth1VLAN4Priority 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.4.2
Ethernet1 VLAN4 priority
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth1VLAN4Address 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.4.3
Ethernet1 VLAN4 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN4SubnetMask 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.4.4
Ethernet1 VLAN4 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN4Router 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.4.5
Ethernet1 VLAN4 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN5ID 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.5.1
Ethernet1 VLAN5 ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth1VLAN5Priority 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.5.2
Ethernet1 VLAN5 priority
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth1VLAN5Address 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.5.3
Ethernet1 VLAN5 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN5SubnetMask 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.5.4
Ethernet1 VLAN5 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN5Router 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.5.5
Ethernet1 VLAN5 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN6ID 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.6.1
Ethernet1 VLAN6 ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth1VLAN6Priority 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.6.2
Ethernet1 VLAN6 priority
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth1VLAN6Address 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.6.3
Ethernet1 VLAN6 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN6SubnetMask 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.6.4
Ethernet1 VLAN6 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN6Router 1.3.6.1.4.1.3052.17.2.4.1.1.1.5.6.5
Ethernet1 VLAN6 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1MAC 1.3.6.1.4.1.3052.17.2.4.1.1.1.6
Ethernet1 MAC
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

eth2Mode 1.3.6.1.4.1.3052.17.2.4.1.1.2.1
Mode of the Ethernet2 interface: STATIC,DHCP,VLAN
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

eth2Address 1.3.6.1.4.1.3052.17.2.4.1.1.2.2
Ethernet2 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2SubnetMask 1.3.6.1.4.1.3052.17.2.4.1.1.2.3
Ethernet2 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2Router 1.3.6.1.4.1.3052.17.2.4.1.1.2.4
Ethernet2 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN1ID 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.1.1
Ethernet2 VLAN1 ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth2VLAN1Priority 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.1.2
Ethernet2 VLAN1 priority
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth2VLAN1Address 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.1.3
Ethernet2 VLAN1 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN1SubnetMask 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.1.4
Ethernet2 VLAN1 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN1Router 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.1.5
Ethernet2 VLAN1 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN2ID 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.2.1
Ethernet2 VLAN2 ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth2VLAN2Priority 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.2.2
Ethernet2 VLAN2 priority
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth2VLAN2Address 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.2.3
Ethernet2 VLAN2 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN2SubnetMask 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.2.4
Ethernet2 VLAN2 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN2Router 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.2.5
Ethernet2 VLAN2 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN3ID 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.3.1
Ethernet2 VLAN3 ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth2VLAN3Priority 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.3.2
Ethernet2 VLAN3 priority
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth2VLAN3Address 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.3.3
Ethernet2 VLAN3 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN3SubnetMask 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.3.4
Ethernet2 VLAN3 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN3Router 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.3.5
Ethernet2 VLAN3 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN4ID 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.4.1
Ethernet2 VLAN4 ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth2VLAN4Priority 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.4.2
Ethernet2 VLAN4 priority
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth2VLAN4Address 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.4.3
Ethernet2 VLAN4 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN4SubnetMask 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.4.4
Ethernet2 VLAN4 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN4Router 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.4.5
Ethernet2 VLAN4 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN5ID 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.5.1
Ethernet2 VLAN5 ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth2VLAN5Priority 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.5.2
Ethernet2 VLAN5 priority
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth2VLAN5Address 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.5.3
Ethernet2 VLAN5 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN5SubnetMask 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.5.4
Ethernet2 VLAN5 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN5Router 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.5.5
Ethernet2 VLAN5 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN6ID 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.6.1
Ethernet2 VLAN6 ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth2VLAN6Priority 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.6.2
Ethernet2 VLAN6 priority
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth2VLAN6Address 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.6.3
Ethernet2 VLAN6 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN6SubnetMask 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.6.4
Ethernet2 VLAN6 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN6Router 1.3.6.1.4.1.3052.17.2.4.1.1.2.5.6.5
Ethernet2 VLAN6 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2MAC 1.3.6.1.4.1.3052.17.2.4.1.1.2.6
Ethernet2 MAC
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

defaultRouter 1.3.6.1.4.1.3052.17.2.4.2
The default router/gateway
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

dnsTable 1.3.6.1.4.1.3052.17.2.4.3
DNS server address table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DNSConfig

dnsEntry 1.3.6.1.4.1.3052.17.2.4.3.1
DNS server address entry
Status: current Access: not-accessible
OBJECT-TYPE    
  DNSConfig  

dnsIndex 1.3.6.1.4.1.3052.17.2.4.3.1.1
Index for DNS server address
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2  

dnsAddress 1.3.6.1.4.1.3052.17.2.4.3.1.2
DNS server address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hostname 1.3.6.1.4.1.3052.17.2.4.4
The hostname of the unit
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

hostTable 1.3.6.1.4.1.3052.17.2.4.5
Static host table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HostConfig

hostEntry 1.3.6.1.4.1.3052.17.2.4.5.1
Static host entry
Status: current Access: not-accessible
OBJECT-TYPE    
  HostConfig  

hostIndex 1.3.6.1.4.1.3052.17.2.4.5.1.1
Index for static host
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2  

hostDeclaration 1.3.6.1.4.1.3052.17.2.4.5.1.2
Static host declaration string (i.e. 'address hostname')
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ncpDuplex 1.3.6.1.4.1.3052.17.2.4.6
For network command processor: 1=Input characters are echoed; 0=no echo.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

ncpTimeout 1.3.6.1.4.1.3052.17.2.4.7
Network command processor inactivity timeout
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

snmpAgentEnable 1.3.6.1.4.1.3052.17.2.4.8.1
ON/OFF for snmp agent
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpNtfnAttempts 1.3.6.1.4.1.3052.17.2.4.8.7.1
Maximum of times the unit attempts to send a notification (trap/inform) in 1 cycle
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

snmpNtfnTimeout 1.3.6.1.4.1.3052.17.2.4.8.7.2
Number of seconds between retries of sending a notification
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

snmpNtfnCycles 1.3.6.1.4.1.3052.17.2.4.8.7.3
Number of times the unit attempts a group of attempts to send a notification (a cycle)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

snmpNtfnSnooze 1.3.6.1.4.1.3052.17.2.4.8.7.4
Minutes between cycles
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

snmpProxyTable 1.3.6.1.4.1.3052.17.2.4.8.8.1
Table of SNMP proxy entries
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SNMPProxyTable

snmpProxyEntry 1.3.6.1.4.1.3052.17.2.4.8.8.1.1
Entry for SNMP proxy table
Status: current Access: not-accessible
OBJECT-TYPE    
  SNMPProxyTable  

snmpProxyIndex 1.3.6.1.4.1.3052.17.2.4.8.8.1.1.1
Index for SNMP proxy table
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

snmpProxyOIDBranch 1.3.6.1.4.1.3052.17.2.4.8.8.1.1.2
The OID branch to trigger the proxy function. This should cover the device to proxy.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpProxyIP 1.3.6.1.4.1.3052.17.2.4.8.8.1.1.3
The IP address of the device to proxy.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpProxyPort 1.3.6.1.4.1.3052.17.2.4.8.8.1.1.4
The UDP port on which the device to proxy listens.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

snmpPMode 1.3.6.1.4.1.3052.17.2.4.8.9.1
Mode of poll operation: OFF or POLL ONLY (just make the results available to view).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpPRequestTable 1.3.6.1.4.1.3052.17.2.4.8.9.4
Table of SNMP Poll requests.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SNMPPollRequestConfig

snmpPRequestEntry 1.3.6.1.4.1.3052.17.2.4.8.9.4.1
Entry for table pf SNMP Poll requests.
Status: current Access: not-accessible
OBJECT-TYPE    
  SNMPPollRequestConfig  

snmpPRequestIndex 1.3.6.1.4.1.3052.17.2.4.8.9.4.1.1
Index for table of SNMP Poll requests.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..64  

snmpPRequestDescription 1.3.6.1.4.1.3052.17.2.4.8.9.4.1.2
A description for this single telemetry request; no functional effect.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpPRequestAgent 1.3.6.1.4.1.3052.17.2.4.8.9.4.1.3
SNMP Agent IP address or hostname for this single telemetry request.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpPRequestReadcom 1.3.6.1.4.1.3052.17.2.4.8.9.4.1.4
SNMP read community for this single telemetry request.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpPRequestOID 1.3.6.1.4.1.3052.17.2.4.8.9.4.1.5
SNMP object identifier for this single telemetry request.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpPRequestPeriod 1.3.6.1.4.1.3052.17.2.4.8.9.4.1.6
How many seconds between periodic SNMP polls of this single telemetry request.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

snmpPRequestResultStatus 1.3.6.1.4.1.3052.17.2.4.8.9.4.1.10
Status of the last attempt for this telemetry request.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

snmpPRequestResultValue 1.3.6.1.4.1.3052.17.2.4.8.9.4.1.11
The telemetry value if the last request was successful.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

snmpPRequestResultTime 1.3.6.1.4.1.3052.17.2.4.8.9.4.1.12
The timestamp of the last telemetry request.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

snmpPRequestResultType 1.3.6.1.4.1.3052.17.2.4.8.9.4.1.13
The type of the telemetry as reported by the agent.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ftpPushEnable 1.3.6.1.4.1.3052.17.2.4.9.1
Enable FTP push for REGULAR (protocol: FTP) or SECURE (protocol: SFTP) operation, or disable it (OFF)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ftpPushServer 1.3.6.1.4.1.3052.17.2.4.9.2