SITEBOSS-550-STD-MIB
File:
SITEBOSS-550-STD-MIB.mib (563033 bytes)
Imported modules
Imported symbols
Defined Types
Defined Values
s550 |
1.3.6.1.4.1.3052.10 |
MIB module for managing Asentria SiteBoss 550 |
MODULE-IDENTITY |
|
|
|
status |
1.3.6.1.4.1.3052.10.1 |
OBJECT IDENTIFIER |
|
|
|
config |
1.3.6.1.4.1.3052.10.2 |
OBJECT IDENTIFIER |
|
|
|
network |
1.3.6.1.4.1.3052.10.2.4 |
OBJECT IDENTIFIER |
|
|
|
interface |
1.3.6.1.4.1.3052.10.2.4.1 |
OBJECT IDENTIFIER |
|
|
|
ethernet |
1.3.6.1.4.1.3052.10.2.4.1.1 |
OBJECT IDENTIFIER |
|
|
|
ethernet1 |
1.3.6.1.4.1.3052.10.2.4.1.1.1 |
OBJECT IDENTIFIER |
|
|
|
eth1VLAN |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5 |
OBJECT IDENTIFIER |
|
|
|
eth1VLAN1 |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.1 |
OBJECT IDENTIFIER |
|
|
|
eth1VLAN2 |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.2 |
OBJECT IDENTIFIER |
|
|
|
eth1VLAN3 |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.3 |
OBJECT IDENTIFIER |
|
|
|
eth1VLAN4 |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.4 |
OBJECT IDENTIFIER |
|
|
|
eth1VLAN5 |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.5 |
OBJECT IDENTIFIER |
|
|
|
eth1VLAN6 |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.6 |
OBJECT IDENTIFIER |
|
|
|
ethernet2 |
1.3.6.1.4.1.3052.10.2.4.1.1.2 |
OBJECT IDENTIFIER |
|
|
|
eth2VLAN |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5 |
OBJECT IDENTIFIER |
|
|
|
eth2VLAN1 |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.1 |
OBJECT IDENTIFIER |
|
|
|
eth2VLAN2 |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.2 |
OBJECT IDENTIFIER |
|
|
|
eth2VLAN3 |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.3 |
OBJECT IDENTIFIER |
|
|
|
eth2VLAN4 |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.4 |
OBJECT IDENTIFIER |
|
|
|
eth2VLAN5 |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.5 |
OBJECT IDENTIFIER |
|
|
|
eth2VLAN6 |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.6 |
OBJECT IDENTIFIER |
|
|
|
snmp |
1.3.6.1.4.1.3052.10.2.4.8 |
OBJECT IDENTIFIER |
|
|
|
snmpProxy |
1.3.6.1.4.1.3052.10.2.4.8.8 |
OBJECT IDENTIFIER |
|
|
|
snmpPoll |
1.3.6.1.4.1.3052.10.2.4.8.9 |
OBJECT IDENTIFIER |
|
|
|
ftpPush |
1.3.6.1.4.1.3052.10.2.4.9 |
OBJECT IDENTIFIER |
|
|
|
ppp |
1.3.6.1.4.1.3052.10.2.4.10 |
OBJECT IDENTIFIER |
|
|
|
pppDial |
1.3.6.1.4.1.3052.10.2.4.10.1 |
OBJECT IDENTIFIER |
|
|
|
pppHost |
1.3.6.1.4.1.3052.10.2.4.10.2 |
OBJECT IDENTIFIER |
|
|
|
routing |
1.3.6.1.4.1.3052.10.2.4.11 |
OBJECT IDENTIFIER |
|
|
|
netSecurity |
1.3.6.1.4.1.3052.10.2.4.12 |
OBJECT IDENTIFIER |
|
|
|
rts |
1.3.6.1.4.1.3052.10.2.4.13 |
OBJECT IDENTIFIER |
|
|
|
rtsAlarms |
1.3.6.1.4.1.3052.10.2.4.13.2 |
OBJECT IDENTIFIER |
|
|
|
trap |
1.3.6.1.4.1.3052.10.2.4.14 |
OBJECT IDENTIFIER |
|
|
|
trapInclude |
1.3.6.1.4.1.3052.10.2.4.14.1 |
OBJECT IDENTIFIER |
|
|
|
routeTest |
1.3.6.1.4.1.3052.10.2.4.15 |
OBJECT IDENTIFIER |
|
|
|
wireless |
1.3.6.1.4.1.3052.10.2.4.16 |
OBJECT IDENTIFIER |
|
|
|
email |
1.3.6.1.4.1.3052.10.2.4.17 |
OBJECT IDENTIFIER |
|
|
|
netAdvanced |
1.3.6.1.4.1.3052.10.2.4.18 |
OBJECT IDENTIFIER |
|
|
|
web |
1.3.6.1.4.1.3052.10.2.4.19 |
OBJECT IDENTIFIER |
|
|
|
ethExpan |
1.3.6.1.4.1.3052.10.2.4.20 |
OBJECT IDENTIFIER |
|
|
|
modem |
1.3.6.1.4.1.3052.10.2.5 |
OBJECT IDENTIFIER |
|
|
|
modemClid |
1.3.6.1.4.1.3052.10.2.5.8 |
OBJECT IDENTIFIER |
|
|
|
time |
1.3.6.1.4.1.3052.10.2.8 |
OBJECT IDENTIFIER |
|
|
|
console |
1.3.6.1.4.1.3052.10.2.10 |
OBJECT IDENTIFIER |
|
|
|
secCore |
1.3.6.1.4.1.3052.10.2.11.1 |
OBJECT IDENTIFIER |
|
|
|
secFactory |
1.3.6.1.4.1.3052.10.2.11.3 |
OBJECT IDENTIFIER |
|
|
|
secSSH |
1.3.6.1.4.1.3052.10.2.11.4 |
OBJECT IDENTIFIER |
|
|
|
secVPN |
1.3.6.1.4.1.3052.10.2.11.5 |
OBJECT IDENTIFIER |
|
|
|
event |
1.3.6.1.4.1.3052.10.2.12 |
OBJECT IDENTIFIER |
|
|
|
evCore |
1.3.6.1.4.1.3052.10.2.12.1 |
OBJECT IDENTIFIER |
|
|
|
evLog |
1.3.6.1.4.1.3052.10.2.12.1.3 |
OBJECT IDENTIFIER |
|
|
|
evMgmt |
1.3.6.1.4.1.3052.10.2.12.1.4 |
OBJECT IDENTIFIER |
|
|
|
evData |
1.3.6.1.4.1.3052.10.2.12.2 |
OBJECT IDENTIFIER |
|
|
|
evdCore |
1.3.6.1.4.1.3052.10.2.12.2.1 |
OBJECT IDENTIFIER |
|
|
|
evNoData1 |
1.3.6.1.4.1.3052.10.2.12.3 |
OBJECT IDENTIFIER |
|
|
|
evNoData2 |
1.3.6.1.4.1.3052.10.2.12.4 |
OBJECT IDENTIFIER |
|
|
|
evSched1 |
1.3.6.1.4.1.3052.10.2.12.5 |
OBJECT IDENTIFIER |
|
|
|
evSched2 |
1.3.6.1.4.1.3052.10.2.12.6 |
OBJECT IDENTIFIER |
|
|
|
evNoSensor |
1.3.6.1.4.1.3052.10.2.12.9 |
OBJECT IDENTIFIER |
|
|
|
fuelSensor |
1.3.6.1.4.1.3052.10.2.12.11 |
OBJECT IDENTIFIER |
|
|
|
evReset |
1.3.6.1.4.1.3052.10.2.12.16 |
OBJECT IDENTIFIER |
|
|
|
evGlobal |
1.3.6.1.4.1.3052.10.2.12.18 |
OBJECT IDENTIFIER |
|
|
|
action |
1.3.6.1.4.1.3052.10.2.14 |
OBJECT IDENTIFIER |
|
|
|
actionSched |
1.3.6.1.4.1.3052.10.2.14.3 |
OBJECT IDENTIFIER |
|
|
|
sys |
1.3.6.1.4.1.3052.10.2.16 |
OBJECT IDENTIFIER |
|
|
|
sysTime |
1.3.6.1.4.1.3052.10.2.16.1 |
OBJECT IDENTIFIER |
|
|
|
sysTimeNet |
1.3.6.1.4.1.3052.10.2.16.1.4 |
OBJECT IDENTIFIER |
|
|
|
sysPT |
1.3.6.1.4.1.3052.10.2.16.2 |
OBJECT IDENTIFIER |
|
|
|
sysLog |
1.3.6.1.4.1.3052.10.2.16.9 |
OBJECT IDENTIFIER |
|
|
|
sysCRDB |
1.3.6.1.4.1.3052.10.2.16.10 |
OBJECT IDENTIFIER |
|
|
|
sysLoc |
1.3.6.1.4.1.3052.10.2.16.14 |
OBJECT IDENTIFIER |
|
|
|
sysUpdate |
1.3.6.1.4.1.3052.10.2.16.18 |
OBJECT IDENTIFIER |
|
|
|
auditLog |
1.3.6.1.4.1.3052.10.2.17 |
OBJECT IDENTIFIER |
|
|
|
scripting |
1.3.6.1.4.1.3052.10.2.18 |
OBJECT IDENTIFIER |
|
|
|
generator |
1.3.6.1.4.1.3052.10.2.19 |
OBJECT IDENTIFIER |
|
|
|
genSet |
1.3.6.1.4.1.3052.10.2.19.1 |
OBJECT IDENTIFIER |
|
|
|
genSetRelay |
1.3.6.1.4.1.3052.10.2.19.1.2 |
OBJECT IDENTIFIER |
|
|
|
genSetCC |
1.3.6.1.4.1.3052.10.2.19.1.3 |
OBJECT IDENTIFIER |
|
|
|
genRun |
1.3.6.1.4.1.3052.10.2.19.2 |
OBJECT IDENTIFIER |
|
|
|
calendar |
1.3.6.1.4.1.3052.10.2.20 |
OBJECT IDENTIFIER |
|
|
|
productIds |
1.3.6.1.4.1.3052.10.3 |
OBJECT IDENTIFIER |
|
|
|
esPointTable |
1.3.6.1.4.1.3052.10.1.1.1 |
This table organizes 4 basic attributes of points. A point
is a particular sensor on an EventSensor (e.g., temperature,
humidity, contact closure 2, relay 5, etc.). The 4 point
attributes are its name, whether it's in its event state,
the point's value as a number and its value as a string.
Points are referenced by a point index. The point index
is a string of 3 numbers separated by periods.
It contains all the information necessary for getting a piece
of data off an event sensor; namely, which EventSensor,
point class, and which-sensor-of-that-class (a.k.a. point).
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ESPoint |
|
esPointEntry |
1.3.6.1.4.1.3052.10.1.1.1.1 |
Entry for EventSensor point table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ESPoint |
|
|
esIndexES |
1.3.6.1.4.1.3052.10.1.1.1.1.1 |
The part of the point index that refers to an
EventSensor.
The point index is a string of 3 numbers separated
by periods. It contains all the information
necessary for getting a piece of data off an event
sensor; namely, which EventSensor, point class,
and which-sensor-of-that-class (a.k.a. point).
This object's allowable values are 1 through 16,
and 200. 200 always refers to the EventSensor
inside the unit. 1 through 16 refer to additional
attached EventSensors.
The number corresponding to an EventSensor is
determined by the user at the initial configuration
time. If there is an internal sensor in the unit,
it will always be the first item in the Sensor
Events setup menu.
For example, if a new EventSensor is configured as
the 2nd entry AFTER the internal EventSensor (if
one exists) in the Sensor Events Setup Menu, then
that EventSensor will be known from then on as
EventSensor 2. All point indeces with esIndexES=2
will now refer to that particular EventSensor.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..200 |
|
esIndexPC |
1.3.6.1.4.1.3052.10.1.1.1.1.2 |
The part of the point index that refers to point class.
The point index is a string of 3 numbers separated by periods.
It contains all the information necessary for getting a piece
of data off an event sensor; namely, which EventSensor,
point class, and which-sensor-of-that-class (a.k.a. point).
The values for this object are:
1=temperature sensor
2=contact closure
3=humidity sensor
4=noise sensor
5=analog input
6=relay
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..6 |
|
esIndexPoint |
1.3.6.1.4.1.3052.10.1.1.1.1.3 |
The part of the point index that delineates which
sensor on the EventSensor.
So this combined with esIndexPC (Point Class or type)
and esIndexES (which EventSensor) uniquely defines each
point (sensor or relay) attached to a unit. For
example, if esIndexES is 3, esIndexPC is 1 and
esIndexPoint is 4 then this is the Fourth Temperature
Sensor on EventSensor number 3. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..64 |
|
esPointName |
1.3.6.1.4.1.3052.10.1.1.1.1.4 |
The name of the point on an EventSensor. For example,
'AC temp' (in the case of the temperature sensor on an
EventSensor).
There can be multiple points of the same point class on an
EventSensor (e.g., 8 contact closures) and multiple sensor
classes on an EventSensor (e.g., temperature, contact closure,
humidity).
If the point referenced by a given point index is solitary
(e.g., temperature sensor, because there can be only one on
an EventSensor), then this object reads as ''. Setting this object for solitary point indices sets
the EventSensor name only.
On the other hand, if a given point is among other points of
the same point class on an EventSensor, then this object reads
as ''. Setting this object for these NON-
solitary point indices sets the sensor name only - not the
EventSensor name. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esPointInEventState |
1.3.6.1.4.1.3052.10.1.1.1.1.5 |
A number referring to the event state of a point
on an EventSensor. This number can have different
meanings depending on the point class.
If the point class is temperature, humidity, or
analog input, then the values of this object are:
1=very low
2=low
3=normal
4=high
5=very high
For contact closures the values of this object are:
1=point in event state
2=point in normal state
For relays the values of this object are:
1=relay energized (active)
2=relay de-energized (inactive)
For any point class and any point, if the event
state is undefined, then the value of this object
is 0.
For any point class except relay, this object is
read-only. For relays, setting this object to 1
puts the relay into its active (energized) state.
Setting it to 2 puts the relay into its inactive
(de-energized) state. Setting it to any
value greater than 2 puts the relay into its
active state for that many seconds (up to 3600),
after which time it puts the relay into its
inactive state.
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
esPointValueInt |
1.3.6.1.4.1.3052.10.1.1.1.1.6 |
A read-only number referring to the value of a
point on an EventSensor.
If the point class is temperature, then this object
is the temperature in its configured scale (default
is Fahrenheit).
If the point class is contact closure or relay, then
this object is either 0 (open) or 1 (closed).
If the point class is humidity, then this object
is the percent relative humidity.
If the point class is analog input, then this
object is the signed input value in tenths of the
configured units.
If the point class is relay, then this object is
either 1 (active a.k.a. energized) or 0
(inactive a.k.a. de-energized). This object cannot
be used to control the relay (use esPointInEventState
for that).
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-2147483648..2147483647 |
|
esPointValueStr |
1.3.6.1.4.1.3052.10.1.1.1.1.7 |
A string referring to the value of a point on an
EventSensor.
For contact closures this object is either 'Open'
or 'Closed'.
For relays this object is either 'Active'
(energized) or 'Inactive' (de-energized).
For temperature and humidity point classes, this
object is the string representation of the
esPointValueInt object. For temperature, 'C' or
'F' is including in the string to indicate scale.
For analog inputs, this object is the string
representation of the plus/minus input in the
configured units appended with the unit name.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esPointTimeLastChange |
1.3.6.1.4.1.3052.10.1.1.1.1.8 |
The time of the last time an event was
triggerred for a point on an EventSensor in
MM/DD/YY HH:MM:SS format.
For contact closures, the possible events are
Active and Inactive. For temperature, humidity,
and analog inputs, the possible events are Normal,
High, Very High, Low, and Very Low.
For relays, this object is a null string. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esPointTimetickLastChange |
1.3.6.1.4.1.3052.10.1.1.1.1.9 |
The time of the last time an event was
triggerred for a point on an EventSensor in
100ths of seconds since reset.
For contact closures, the possible events are
Active and Inactive. For temperature, humidity,
and analog inputs, the possible events are Normal,
High, Very High, Low, and Very Low.
For relays, this object is 0. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
deStatusTable |
1.3.6.1.4.1.3052.10.1.2.1 |
Data Event Status Table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
DEStatus |
|
deStatusEntry |
1.3.6.1.4.1.3052.10.1.2.1.1 |
EventSensor status entry |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
DEStatus |
|
|
deStatusIndex |
1.3.6.1.4.1.3052.10.1.2.1.1.1 |
Index for Data Events |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..100 |
|
deStatusCounter |
1.3.6.1.4.1.3052.10.1.2.1.1.3 |
Number of times a data record has matched this
event's equation.
Range: 1-999999999 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
deStatusThreshold |
1.3.6.1.4.1.3052.10.1.2.1.1.4 |
Number of times the equation is matched before
an event is triggered.
Range: 1-999999999 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
modemStatus |
1.3.6.1.4.1.3052.10.1.3 |
status of modem (idle, dialing, connected, etc.) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
modemCLIDLogEntry |
1.3.6.1.4.1.3052.10.1.4.1 |
Entry for table of CLID log entries |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ModemCLIDLogConfig |
|
|
modemCLIDLogIndex |
1.3.6.1.4.1.3052.10.1.4.1.1 |
Index for table of CLID log entries |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..8 |
|
fsStatusTable |
1.3.6.1.4.1.3052.10.1.6.1 |
Fuel sensor status table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
FSStatus |
|
fsStatusEntry |
1.3.6.1.4.1.3052.10.1.6.1.1 |
Fuel sensor status table entry |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
FSStatus |
|
|
fsStatusIndex |
1.3.6.1.4.1.3052.10.1.6.1.1.1 |
Index for fuel sensors |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..3 |
|
fsStatusVolumeValueString |
1.3.6.1.4.1.3052.10.1.6.1.1.4 |
Fuel volume. Range is -2,147,483,648 to 2,147,483,647. This value reads
-999 when the fuel sensor is disconnected |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsStatusVolumePercentLevel |
1.3.6.1.4.1.3052.10.1.6.1.1.7 |
Height of the fluid in the tank expressed as a percentage of the tank
height, in hundredths of a percent. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsStatusCombined |
1.3.6.1.4.1.3052.10.1.6.1.1.9 |
Combined status string intended to be parsed by NMS:
deviceState`deviceStateColorCode`percentRounded`valueAsFloat`volumeEventState`volumeEventStateColorCode`capacity`units`name |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmsStatus |
1.3.6.1.4.1.3052.10.1.7.1 |
Wireless modem status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmsSignal |
1.3.6.1.4.1.3052.10.1.7.2 |
Wireless modem Signal strength |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmsBER |
1.3.6.1.4.1.3052.10.1.7.4 |
Wireless modem Bit Error Rate |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmsUpdated |
1.3.6.1.4.1.3052.10.1.7.5 |
Wireless modem info last update time |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmsLAC |
1.3.6.1.4.1.3052.10.1.7.7 |
Wireless modem Location Area Code |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmsCellID |
1.3.6.1.4.1.3052.10.1.7.8 |
Wireless modem Cell ID |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmsIMSI |
1.3.6.1.4.1.3052.10.1.7.9 |
Wireless modem Internation Mobile Subscriber Identity number |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmsPhnum |
1.3.6.1.4.1.3052.10.1.7.10 |
Wireless modem phone number |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmsLocalIP |
1.3.6.1.4.1.3052.10.1.7.11 |
Local IP address of modem on wireless network |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmsMgfID |
1.3.6.1.4.1.3052.10.1.7.12 |
Wireless modem manufacturer ID |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmsModelID |
1.3.6.1.4.1.3052.10.1.7.13 |
Wireless modem model ID |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmsIMEI |
1.3.6.1.4.1.3052.10.1.7.14 |
Wireless modem International Mobile Equipment Identity number |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmsRevID |
1.3.6.1.4.1.3052.10.1.7.15 |
Wireless modem revision ID |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmsNetName |
1.3.6.1.4.1.3052.10.1.7.16 |
Wireless modem network name |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmsBand |
1.3.6.1.4.1.3052.10.1.7.18 |
Wireless modem band |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmsChannel |
1.3.6.1.4.1.3052.10.1.7.19 |
Wireless modem channel |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmsNetCode |
1.3.6.1.4.1.3052.10.1.7.21 |
Wireless modem network code |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmsPLMNColor |
1.3.6.1.4.1.3052.10.1.7.22 |
Wireless modem PLMN color |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmsBScolor |
1.3.6.1.4.1.3052.10.1.7.23 |
Wireless modem BS color |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmsMpRACH |
1.3.6.1.4.1.3052.10.1.7.24 |
Wireless modem max power RACH |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmsMinRxLevel |
1.3.6.1.4.1.3052.10.1.7.25 |
Wireless modem minimum receive level |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmsBaseCoeff |
1.3.6.1.4.1.3052.10.1.7.26 |
Wireless modem base coefficient |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmsSIMStatus |
1.3.6.1.4.1.3052.10.1.7.27 |
WWireless modem SIM status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmsICCID |
1.3.6.1.4.1.3052.10.1.7.28 |
Wireless modem SIM ICCID |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmStatusTable |
1.3.6.1.4.1.3052.10.1.8.1 |
AC power monitor status table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ACPMStatus |
|
acpmStatusEntry |
1.3.6.1.4.1.3052.10.1.8.1.1 |
AC power monitor status table entry |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ACPMStatus |
|
|
acpmsIndex |
1.3.6.1.4.1.3052.10.1.8.1.1.1 |
Index for AC power monitors |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..6 |
|
acpmsName |
1.3.6.1.4.1.3052.10.1.8.1.1.2 |
Name for the AC power monitor device. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsAvgVoltageValueStr |
1.3.6.1.4.1.3052.10.1.8.1.1.3 |
Average voltage, in volts. This is calculated using the formula
(register * PT ratio * 0.1). This could be either the average of
the phase voltages, or the sum of the phase voltages, depending
on device configuration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsAvgVoltageAvgStr |
1.3.6.1.4.1.3052.10.1.8.1.1.6 |
Average average voltage value since last reset, in volts. This is
the unit's average of its measurements of the average voltage
reported by the AC power monitor device. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsVoltagePhaseAValueStr |
1.3.6.1.4.1.3052.10.1.8.1.1.8 |
Phase A voltage, in volts. This is calculated using the formula
(register * PT ratio * 0.1). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsVoltagePhaseBValueStr |
1.3.6.1.4.1.3052.10.1.8.1.1.9 |
Phase B voltage, in volts. This is calculated using the formula
(register * PT ratio * 0.1). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsVoltagePhaseCValueStr |
1.3.6.1.4.1.3052.10.1.8.1.1.10 |
Phase C voltage, in volts. This is calculated using the formula
(register * PT ratio * 0.1). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsAvgCurrentValueStr |
1.3.6.1.4.1.3052.10.1.8.1.1.11 |
Average current, in amps. This is calculated using the formula
(register * CT ratio * 0.001). This could be either the average of
the phase currents, or the sum of the phase currents, depending on
device configuration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsAvgCurrentAvgStr |
1.3.6.1.4.1.3052.10.1.8.1.1.14 |
Average average current value since last reset, in amps. This is
the unit's average of its measurements of the average current reported
by the AC power monitor device. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsCurrentPhaseAValueStr |
1.3.6.1.4.1.3052.10.1.8.1.1.16 |
Phase A current, in amps. This is calculated using the formula
(register * CT ratio * 0.001). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsCurrentPhaseBValueStr |
1.3.6.1.4.1.3052.10.1.8.1.1.17 |
Phase B current, in amps. This is calculated using the formula
(register * CT ratio * 0.001). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsCurrentPhaseCValueStr |
1.3.6.1.4.1.3052.10.1.8.1.1.18 |
Phase C current, in amps. This is calculated using the formula
(register * CT ratio * 0.001). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsAvgFreqValueStr |
1.3.6.1.4.1.3052.10.1.8.1.1.19 |
Frequency, in hertz. On the YD2010, this is calculated using the
formula (register * 0.00106813). On the WattsOn, this is calculated
using the formula (register * 0.1). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsAvgFreqMinStr |
1.3.6.1.4.1.3052.10.1.8.1.1.20 |
Minimum frequency value since last reset, in hertz. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsAvgFreqMaxStr |
1.3.6.1.4.1.3052.10.1.8.1.1.21 |
Maximum frequency value since last reset, in hertz. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsAvgFreqAvgStr |
1.3.6.1.4.1.3052.10.1.8.1.1.22 |
Average frequency value since last reset, in hertz. This is the
unit's average of its measurements of the average frequency reported
by the AC power monitor device. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsAvgFreqInEventState |
1.3.6.1.4.1.3052.10.1.8.1.1.23 |
Event state of this AC power monitor frequency (Low, Normal, High, etc.). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsTRPValueStr |
1.3.6.1.4.1.3052.10.1.8.1.1.24 |
Total real power, in watts. On the YD2010, this is calculated using
the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is
the voltage range taken from register 0x30A. On the WattsOn models,
this is calculated using the formula (register * PT * CT). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsTRPMinStr |
1.3.6.1.4.1.3052.10.1.8.1.1.25 |
Minimum total real power value since last reset, in watts. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsTRPMaxStr |
1.3.6.1.4.1.3052.10.1.8.1.1.26 |
Maximum total real power value since last reset, in watts. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsTRPAvgStr |
1.3.6.1.4.1.3052.10.1.8.1.1.27 |
Average total real power value since last reset, in watts. This is
the unit's average of its measurements of the average total real power
reported by the AC power monitor device. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsTRPInEventState |
1.3.6.1.4.1.3052.10.1.8.1.1.28 |
Event state of this AC power monitor total real power (Low, Normal,
High, etc.). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsRPPhaseAValueStr |
1.3.6.1.4.1.3052.10.1.8.1.1.29 |
Phase A real power, in watts. On the YD2010, this is calculated using
the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is
the voltage range taken from register 0x30A. On the WattsOn, this is
calculated using the formula (register * PT * CT). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsRPPhaseBValueStr |
1.3.6.1.4.1.3052.10.1.8.1.1.30 |
Phase B real power, in watts. On the YD2010, this is calculated using
the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is
the voltage range taken from register 0x30A. On the WattsOn, this is
calculated using the formula (register * PT * CT). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsRPPhaseCValueStr |
1.3.6.1.4.1.3052.10.1.8.1.1.31 |
Phase C real power, in watts. On the YD2010, this is calculated using
the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is
the voltage range taken from register 0x30A. On the WattsOn, this is
calculated using the formula (register * PT * CT). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsCombined |
1.3.6.1.4.1.3052.10.1.8.1.1.32 |
Combined status string intended to be parsed by NMS:
name`deviceState`deviceStateColorCode`voltage`current`frequency`power~voltageEventState`voltageColorCode`currentEventState`currentColorCode`frequencyEventState`freuencyColorCode`powerEventState`powerColorCode |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsTPFMinStr |
1.3.6.1.4.1.3052.10.1.8.1.1.34 |
Total power factor minimum value since last reset. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsTPFMaxStr |
1.3.6.1.4.1.3052.10.1.8.1.1.35 |
Total power factor maximum value since last reset. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsTPFAvgStr |
1.3.6.1.4.1.3052.10.1.8.1.1.36 |
Total power factor average value since last reset. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsTRcPMinStr |
1.3.6.1.4.1.3052.10.1.8.1.1.42 |
Total reactive power minimum value since last reset, in VAR. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsTRcPMaxStr |
1.3.6.1.4.1.3052.10.1.8.1.1.43 |
Total reactive power maximum value since last reset, in VAR. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsTRcPAvgStr |
1.3.6.1.4.1.3052.10.1.8.1.1.44 |
Total reactive power average value since last reset, in VAR. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsTAPMinStr |
1.3.6.1.4.1.3052.10.1.8.1.1.49 |
Total apparent power minimum value since last reset, in VA. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsTAPMaxStr |
1.3.6.1.4.1.3052.10.1.8.1.1.50 |
Total apparent power maximum value since last reset, in VA. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsTAPAvgStr |
1.3.6.1.4.1.3052.10.1.8.1.1.51 |
Total apparent power average value since last reset, in VA. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmsTotalEnergyVA |
1.3.6.1.4.1.3052.10.1.8.1.1.57 |
Total apparent energy, in VA. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
esNumberEventSensors |
1.3.6.1.4.1.3052.10.2.1.1 |
The number of EventSensors recognized by the unit,
including the internal EventSensor.
Range: 1-17 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
esTable |
1.3.6.1.4.1.3052.10.2.1.2 |
The table of what EventSensors are attached to the unit,
including the internal EventSensor |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ESExist |
|
esEntry |
1.3.6.1.4.1.3052.10.2.1.2.1 |
Table entry for EventSensor table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ESExist |
|
|
esIndex |
1.3.6.1.4.1.3052.10.2.1.2.1.1 |
This number refers to an EventSensor; it has the
same meaning as the esIndexES object (see above),
except that this object is used only within the
esTable branch.
This object's allowable values are 1 through 16,
and 200. 200 always refers to the EventSensor
inside the unit. 1 through 16 refer to additional
attached EventSensors.
The number corresponding to an EventSensor is
determined by the user at the initial configuration
time. If there is an internal sensor in the unit,
it will always be the first item in the Sensor
Events setup menu.
For example, if a new EventSensor is configured as
the 2nd entry AFTER the internal EventSensor (if
one exists) in the Sensor Events Setup Menu, then
that EventSensor will be known from then on as
EventSensor 2. All point indeces with esIndex=2
will now refer to that particular EventSensor.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..200 |
|
esName |
1.3.6.1.4.1.3052.10.2.1.2.1.2 |
The name of the EventSensor |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esID |
1.3.6.1.4.1.3052.10.2.1.2.1.3 |
The factory-assigned ID of the EventSensor |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esNumberTempSensors |
1.3.6.1.4.1.3052.10.2.1.2.1.4 |
The number of temperature sensors on the EventSensor |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
esTempReportingMode |
1.3.6.1.4.1.3052.10.2.1.2.1.5 |
Description of how temperature values should
be interpreted. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esNumberCCs |
1.3.6.1.4.1.3052.10.2.1.2.1.6 |
The number of contact closures on the EventSensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
esCCReportingMode |
1.3.6.1.4.1.3052.10.2.1.2.1.7 |
Description of how CC values should be interpreted. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esNumberHumidSensors |
1.3.6.1.4.1.3052.10.2.1.2.1.8 |
The number of humidity sensors on the EventSensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
esHumidReportingMode |
1.3.6.1.4.1.3052.10.2.1.2.1.9 |
Description of how humidity sensor values should be
interpreted. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esNumberNoiseSensors |
1.3.6.1.4.1.3052.10.2.1.2.1.10 |
The number of noise sensors on the EventSensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
esNoiseReportingMode |
1.3.6.1.4.1.3052.10.2.1.2.1.11 |
Description of how noise sensor values should be
interpreted. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esNumberAirflowSensors |
1.3.6.1.4.1.3052.10.2.1.2.1.12 |
The number of airflow sensors on the EventSensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
esAirflowReportingMode |
1.3.6.1.4.1.3052.10.2.1.2.1.13 |
Description of how airflow sensor values should be
interpreted. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esNumberAnalog |
1.3.6.1.4.1.3052.10.2.1.2.1.14 |
The number of analog inputs on the EventSensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
esAnalogReportingMode |
1.3.6.1.4.1.3052.10.2.1.2.1.15 |
Description of how analog input values should be
interpreted. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esNumberRelayOutputs |
1.3.6.1.4.1.3052.10.2.1.2.1.16 |
The number of relay outputs on the EventSensor |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
esRelayReportingMode |
1.3.6.1.4.1.3052.10.2.1.2.1.17 |
Description of how relay output values
should be interpreted. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esTempCombinedStatus |
1.3.6.1.4.1.3052.10.2.1.2.1.18 |
Combined status string intended to be parsed by NMS:
name`value`scale`eventState`eventColorCode |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esCCCombinedStatusBlock1 |
1.3.6.1.4.1.3052.10.2.1.2.1.19 |
Combined status string intended to be parsed by NMS:
numInBlock~name1`value1`eventColorCode1`alias1~name2`value2`eventColorCode2`alias2~...name8`value8`eventColorCode8`alias8 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esCCCombinedStatusBlock2 |
1.3.6.1.4.1.3052.10.2.1.2.1.20 |
Combined status string intended to be parsed by NMS:
numInBlock~name9`value9`eventColorCode9`alias9~name10`value10`eventColorCode10`alias10~...name16`value16`eventColorCode16`alias16 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esCCCombinedStatusBlock3 |
1.3.6.1.4.1.3052.10.2.1.2.1.21 |
Combined status string intended to be parsed by NMS:
numInBlock~name17`value17`eventColorCode17`alias17~name18`value18`eventColorCode18`alias18~...name24`value24`eventColorCode24`alias24 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esCCCombinedStatusBlock4 |
1.3.6.1.4.1.3052.10.2.1.2.1.22 |
Combined status string intended to be parsed by NMS:
numInBlock~name25`value25`eventColorCode25`alias25~name26`value26`eventColorCode26`alias26~...name32`value32`eventColorCode32`alias32 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esCCCombinedStatusBlock5 |
1.3.6.1.4.1.3052.10.2.1.2.1.23 |
Combined status string intended to be parsed by NMS:
numInBlock~name33`value33`eventColorCode33`alias33~name34`value34`eventColorCode34`alias35~...name40`value40`eventColorCode40`alias40 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esCCCombinedStatusBlock6 |
1.3.6.1.4.1.3052.10.2.1.2.1.24 |
Combined status string intended to be parsed by NMS:
numInBlock~name41`value41`eventColorCode41`alias41~name42`value42`eventColorCode42`alias43~...name48`value48`eventColorCode48`alias48 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esCCCombinedStatusBlock7 |
1.3.6.1.4.1.3052.10.2.1.2.1.25 |
Combined status string intended to be parsed by NMS:
numInBlock~name49`value49`eventColorCode49`alias49~name50`value50`eventColorCode50`alias50~...name56`value56`eventColorCode56`alias56 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esCCCombinedStatusBlock8 |
1.3.6.1.4.1.3052.10.2.1.2.1.26 |
Combined status string intended to be parsed by NMS:
numInBlock~name57`value57`eventColorCode57`alias57~name57`value57`eventColorCode564`alias57~...name64`value64`eventColorCode64`alias64 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esHumidCombinedStatus |
1.3.6.1.4.1.3052.10.2.1.2.1.27 |
Combined status string intended to be parsed by NMS:
name`value`eventState`eventColorCode |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esAnalogCombinedStatusBlock1 |
1.3.6.1.4.1.3052.10.2.1.2.1.28 |
Combined status string intended to be parsed by NMS:
numInBlock~name1`value1`units1`eventState`eventColorCode1~name2`value2`units2`eventState`eventColorCode2~... |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esAnalogCombinedStatusBlock2 |
1.3.6.1.4.1.3052.10.2.1.2.1.29 |
Combined status string intended to be parsed by NMS:
numInBlock~name9`value9`units9`eventState9`eventColorCode9~... |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esAnalogCombinedStatusBlock3 |
1.3.6.1.4.1.3052.10.2.1.2.1.30 |
Combined status string intended to be parsed by NMS:
numInBlock~namex`valuex`unitsx`eventStatex`eventColorCodex~... |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esAnalogCombinedStatusBlock4 |
1.3.6.1.4.1.3052.10.2.1.2.1.31 |
Combined status string intended to be parsed by NMS:
numInBlock~namex`valuex`unitsx`eventStatex`eventColorCodex~... |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esAnalogCombinedStatusBlock5 |
1.3.6.1.4.1.3052.10.2.1.2.1.32 |
Combined status string intended to be parsed by NMS:
numInBlock~namex`valuex`unitsx`eventStatex`eventColorCodex~... |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esAnalogCombinedStatusBlock6 |
1.3.6.1.4.1.3052.10.2.1.2.1.33 |
Combined status string intended to be parsed by NMS:
numInBlock~namex`valuex`unitsx`eventStatex`eventColorCodex~... |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esOutputCombinedStatusBlock1 |
1.3.6.1.4.1.3052.10.2.1.2.1.34 |
Combined status string intended to be parsed by NMS:
numInBlock~namex`valuex`unitsx`eventStatex`eventColorCodex~... |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esOutputCombinedStatusBlock2 |
1.3.6.1.4.1.3052.10.2.1.2.1.35 |
Combined status string intended to be parsed by NMS:
numInBlock`namex`valuex`aliasx~namey`valuey`aliasy~...namez`valuez`aliasz |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esNewSensors |
1.3.6.1.4.1.3052.10.2.1.3 |
String representing the number of new (attached but unconfigured) EventSensors |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esPointConfigTempTable |
1.3.6.1.4.1.3052.10.2.2.1 |
This table organizes 3 basic attributes of temperature
sensor points. A point is a particular sensor on an
EventSensor. The 3 point attributes organizes in this table
are:
1. the configuration item (e.g., enable, name, etc.)
2. the eventsensor on which this point resides
3. the point number (always 1 for temp sensors)
Points are referenced by a point config index. The point
config index is a string of 2 numbers separated by periods.
It contains all the information necessary for getting a
piece of data off an event sensor within the context of this
emperature point config table ; namely, which EventSensor,
and which sensor (a.k.a. point) (always 1 for temperature
sensors).
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ESPointConfigTemp |
|
esPointConfigTempEntry |
1.3.6.1.4.1.3052.10.2.2.1.1 |
Entry for EventSensor point config temperature table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ESPointConfigTemp |
|
|
espcTempIndexES |
1.3.6.1.4.1.3052.10.2.2.1.1.1 |
The part of the point index that refers to an
EventSensor.
The point config index is a string of 2 numbers separated
by a period. It contains all the information
necessary for getting a piece of data off an event
sensor within the the context of the eventsensor point
config temperature table; namely, which EventSensor,
and which sensor (a.k.a. point).
This object's allowable values are 1 through 16,
and 200. 200 always refers to the EventSensor
inside the unit. 1 through 16 refer to additional
attached EventSensors.
The number corresponding to an EventSensor is
determined by the user at the initial configuration
time. If there is an internal sensor in the unit,
it will always be the first item in the Sensor
Events setup menu.
For example, if a new EventSensor is configured as
the 2nd entry AFTER the internal EventSensor (if
one exists) in the Sensor Events Setup Menu, then
that EventSensor will be known from then on as
EventSensor 2. All point indeces with esIndexES=2
will now refer to that particular EventSensor.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..200 |
|
espcTempIndexPoint |
1.3.6.1.4.1.3052.10.2.2.1.1.2 |
The part of the point index that delineates which
sensor on the EventSensor.
So this combined with espcTempIndexES (which EventSensor)
uniquely defines each point attached to a unit within the
context of temperature point configuration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..64 |
|
espcTempEnable |
1.3.6.1.4.1.3052.10.2.2.1.1.3 |
ON/OFF enable this temperature sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcTempScale |
1.3.6.1.4.1.3052.10.2.2.1.1.4 |
Scale (C/F) for this temperature sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcTempDeadband |
1.3.6.1.4.1.3052.10.2.2.1.1.5 |
Deadband for this temperature sensor (in floating-point format) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcTempVHighTemp |
1.3.6.1.4.1.3052.10.2.2.1.1.6 |
Very high temperature event threshold for this temperature
sensor (in floating-point format) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcTempVHighActions |
1.3.6.1.4.1.3052.10.2.2.1.1.7 |
Very high temperature event actions for this temperature
sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcTempVHighTrapnum |
1.3.6.1.4.1.3052.10.2.2.1.1.8 |
Very high temperature event trap number for this
temperature sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcTempVHighClass |
1.3.6.1.4.1.3052.10.2.2.1.1.9 |
Very high temperature event class for this temperature
sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcTempHighTemp |
1.3.6.1.4.1.3052.10.2.2.1.1.10 |
High temperature event threshold for this temperature
sensor (in floating-point format) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcTempHighActions |
1.3.6.1.4.1.3052.10.2.2.1.1.11 |
High temperature event actions for this temperature sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcTempHighTrapnum |
1.3.6.1.4.1.3052.10.2.2.1.1.12 |
High temperature event trap number for this temperature
sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcTempHighClass |
1.3.6.1.4.1.3052.10.2.2.1.1.13 |
High temperature event class for this temperature sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcTempNormalActions |
1.3.6.1.4.1.3052.10.2.2.1.1.14 |
Return-to-normal event actions for this temperature sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcTempNormalTrapnum |
1.3.6.1.4.1.3052.10.2.2.1.1.15 |
Return-to-normal event trap number for this temperature
sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcTempNormalClass |
1.3.6.1.4.1.3052.10.2.2.1.1.16 |
Return-to-normal event class for this temperature sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcTempLowTemp |
1.3.6.1.4.1.3052.10.2.2.1.1.17 |
Low temperature event threshold for this temperature sensor
(in floating-point format) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcTempLowActions |
1.3.6.1.4.1.3052.10.2.2.1.1.18 |
Low temperature event actions for this temperature sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcTempLowTrapnum |
1.3.6.1.4.1.3052.10.2.2.1.1.19 |
Low temperature event trap number for this temperature
sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcTempLowClass |
1.3.6.1.4.1.3052.10.2.2.1.1.20 |
Low temperature event class for this temperature sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcTempVLowTemp |
1.3.6.1.4.1.3052.10.2.2.1.1.21 |
Very Low temperature event threshold for this temperature
sensor (in floating-point format) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcTempVLowActions |
1.3.6.1.4.1.3052.10.2.2.1.1.22 |
Very Low temperature event actions for this temperature
sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcTempVLowTrapnum |
1.3.6.1.4.1.3052.10.2.2.1.1.23 |
Very Low temperature event trap number for this temperature
sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcTempVLowClass |
1.3.6.1.4.1.3052.10.2.2.1.1.24 |
Very Low temperature event class for this temperature sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esPointConfigCCTable |
1.3.6.1.4.1.3052.10.2.2.2 |
This table organizes 3 basic attributes of contact closure
points. A point is a particular sensor on an EventSensor.
The 3 point attributes organizes in this table are:
1. the configuration item (e.g., enable, name, etc.)
2. the eventsensor on which this point resides
3. the point number
Points are referenced by a point config index. The point
config index is a string of 2 numbers separated by a period.
It contains all the information necessary for getting a piece
of data off an event sensor within the context of this
contact closure point config table ; namely, which
EventSensor and which sensor.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ESPointConfigCC |
|
esPointConfigCCEntry |
1.3.6.1.4.1.3052.10.2.2.2.1 |
Entry for EventSensor point config contact closure table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ESPointConfigCC |
|
|
espcCCIndexES |
1.3.6.1.4.1.3052.10.2.2.2.1.1 |
The part of the point index that refers to an
EventSensor.
The point config index is a string of 2 numbers separated
by a period. It contains all the information
necessary for getting a piece of data off an event
sensor within the the context of the eventsensor point
config contact closure table; namely, which EventSensor
and which sensor (a.k.a. point).
This object's allowable values are 1 through 16,
and 200. 200 always refers to the EventSensor
inside the unit. 1 through 16 refer to additional
attached EventSensors.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..200 |
|
espcCCIndexPoint |
1.3.6.1.4.1.3052.10.2.2.2.1.2 |
The part of the point index that delineates which
sensor on the EventSensor.
So this combined with espcCCIndexES (which EventSensor)
uniquely defines each point attached to a unit within the
context of contact closure point configuration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..64 |
|
espcCCEnable |
1.3.6.1.4.1.3052.10.2.2.2.1.3 |
ON/OFF enable for this contact closure |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcCCName |
1.3.6.1.4.1.3052.10.2.2.2.1.4 |
Name for this contact closure |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcCCThreshold |
1.3.6.1.4.1.3052.10.2.2.2.1.6 |
Event threshold (seconds) for this contact closure |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..65535 |
|
espcCCEventTrapnum |
1.3.6.1.4.1.3052.10.2.2.2.1.8 |
Event trap number for this contact closure |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcCCNormalActions |
1.3.6.1.4.1.3052.10.2.2.2.1.10 |
Return-to-normal actions for this contact closure |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcCCNormalTrapnum |
1.3.6.1.4.1.3052.10.2.2.2.1.11 |
Return-to-normal trap number for this contact closure |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcCCNormalClass |
1.3.6.1.4.1.3052.10.2.2.2.1.12 |
Return-to-normal class for this contact closure |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcCCAlarmAlias |
1.3.6.1.4.1.3052.10.2.2.2.1.13 |
Event alias for this contact closure |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcCCNormalAlias |
1.3.6.1.4.1.3052.10.2.2.2.1.14 |
Return-to-normal alias for this contact closure |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcCCNormalThreshold |
1.3.6.1.4.1.3052.10.2.2.2.1.15 |
Event threshold (seconds) for this contact closure to return to normal |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..65535 |
|
esPointConfigHumidTable |
1.3.6.1.4.1.3052.10.2.2.3 |
This table organizes 3 basic attributes of humidity points.
A point is a particular sensor on an EventSensor. The 3
point attributes organizes in this table are:
1. the configuration item (e.g., enable, name, etc.)
2. the eventsensor on which this point resides
3. the point number (always 1 for humidity sensors)
Points are referenced by a point config index. The point
config index is a string of 2 numbers separated by a period.
It contains all the information necessary for getting a piece
of data off an event sensor within the context of this
humidity point config table ; namely, which EventSensor and
which sensor.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ESPointConfigHumid |
|
esPointConfigHumidEntry |
1.3.6.1.4.1.3052.10.2.2.3.1 |
Entry for EventSensor point config humidity table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ESPointConfigHumid |
|
|
espcHumidIndexES |
1.3.6.1.4.1.3052.10.2.2.3.1.1 |
The part of the point index that refers to an
EventSensor.
The point config index is a string of 2 numbers separated
by a period. It contains all the information
necessary for getting a piece of data off an event
sensor within the the context of the eventsensor point
config contact closure table; namely, which EventSensor
and which sensor (a.k.a. point).
This object's allowable values are 1 through 16,
and 200. 200 always refers to the EventSensor
inside the unit. 1 through 16 refer to additional
attached EventSensors.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..200 |
|
espcHumidIndexPoint |
1.3.6.1.4.1.3052.10.2.2.3.1.2 |
The part of the point index that delineates which
sensor on the EventSensor.
So this combined with espcHumidIndexES (which EventSensor)
uniquely defines each point attached to a unit within the
context of contact closure point configuration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..64 |
|
espcHumidEnable |
1.3.6.1.4.1.3052.10.2.2.3.1.3 |
ON/OFF enable for this humidity sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcHumidDeadband |
1.3.6.1.4.1.3052.10.2.2.3.1.4 |
Deadband for this humidity sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcHumidVHighHumid |
1.3.6.1.4.1.3052.10.2.2.3.1.5 |
Very high event threshold for this humidity sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcHumidVHighTrapnum |
1.3.6.1.4.1.3052.10.2.2.3.1.7 |
Very high event trap number for this humidity sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcHumidHighHumid |
1.3.6.1.4.1.3052.10.2.2.3.1.9 |
High event threshold for this humidity sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcHumidHighTrapnum |
1.3.6.1.4.1.3052.10.2.2.3.1.11 |
High event trap number for this humidity sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcHumidNormalTrapnum |
1.3.6.1.4.1.3052.10.2.2.3.1.14 |
Return-to-normal trap number for this humidity sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcHumidLowHumid |
1.3.6.1.4.1.3052.10.2.2.3.1.16 |
Low event threshold for this humidity sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcHumidLowTrapnum |
1.3.6.1.4.1.3052.10.2.2.3.1.18 |
Low event trap number for this humidity sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcHumidLowClass |
1.3.6.1.4.1.3052.10.2.2.3.1.19 |
Low event class for this humidity sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcHumidVLowHumid |
1.3.6.1.4.1.3052.10.2.2.3.1.20 |
Very low event threshold for this humidity sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcHumidVLowTrapnum |
1.3.6.1.4.1.3052.10.2.2.3.1.22 |
Very low event trap number for this humidity sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcHumidVLowClass |
1.3.6.1.4.1.3052.10.2.2.3.1.23 |
Very low event class for this humidity sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
esPointConfigAITable |
1.3.6.1.4.1.3052.10.2.2.5 |
This table organizes 3 basic attributes of analog input
points. A point is a particular sensor on an EventSensor.
The 3 point attributes organizes in this table are:
1. the configuration item (e.g., enable, name, etc.)
2. the eventsensor on which this point resides
3. the point number
Points are referenced by a point config index. The point
config index is a string of 2 numbers separated by a period.
It contains all the information necessary for getting a
piece of data off an event sensor within the context of this
analog input point config table ; namely, which EventSensor
and which sensor.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ESPointConfigAnalogInput |
|
esPointConfigAIEntry |
1.3.6.1.4.1.3052.10.2.2.5.1 |
Entry for EventSensor point config analog input table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ESPointConfigAnalogInput |
|
|
espcAIIndexES |
1.3.6.1.4.1.3052.10.2.2.5.1.1 |
The part of the point index that refers to an
EventSensor.
The point config index is a string of 2 numbers separated
by a period. It contains all the information
necessary for getting a piece of data off an event
sensor within the the context of the eventsensor point
config contact closure table; namely, which EventSensor
and which sensor (a.k.a. point).
This object's allowable values are 1 through 16,
and 200. 200 always refers to the EventSensor
inside the unit. 1 through 16 refer to additional
attached EventSensors.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..200 |
|
espcAIIndexPoint |
1.3.6.1.4.1.3052.10.2.2.5.1.2 |
The part of the point index that delineates which
sensor on the EventSensor.
So this combined with espcAIIndexES (which EventSensor)
uniquely defines each point attached to a unit within the
context of contact closure point configuration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..64 |
|
espcAIEnable |
1.3.6.1.4.1.3052.10.2.2.5.1.3 |
ON/OFF for this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcAIPolarity |
1.3.6.1.4.1.3052.10.2.2.5.1.4 |
Polarity for this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcAIDeadband |
1.3.6.1.4.1.3052.10.2.2.5.1.5 |
Deadband for this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcAIVhighValue |
1.3.6.1.4.1.3052.10.2.2.5.1.6 |
Very high event threshold (decivolts or tenths of
milliamps) for this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcAIVhighActions |
1.3.6.1.4.1.3052.10.2.2.5.1.7 |
Very high event actions for this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcAIVhighTrapnum |
1.3.6.1.4.1.3052.10.2.2.5.1.8 |
Very high event trap number for this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcAIVhighClass |
1.3.6.1.4.1.3052.10.2.2.5.1.9 |
Very high event class for this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcAIHighValue |
1.3.6.1.4.1.3052.10.2.2.5.1.10 |
High event threshold (decivolts or tenths of milliamps) for
this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcAIHighActions |
1.3.6.1.4.1.3052.10.2.2.5.1.11 |
High event actions for this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcAIHighTrapnum |
1.3.6.1.4.1.3052.10.2.2.5.1.12 |
High event trap number for this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcAIHighClass |
1.3.6.1.4.1.3052.10.2.2.5.1.13 |
High event class for this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcAINormalActions |
1.3.6.1.4.1.3052.10.2.2.5.1.14 |
Return-to-normal actions for this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcAINormalTrapnum |
1.3.6.1.4.1.3052.10.2.2.5.1.15 |
Return-to-normal trap number for this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcAINormalClass |
1.3.6.1.4.1.3052.10.2.2.5.1.16 |
Return-to-normal class for this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcAILowValue |
1.3.6.1.4.1.3052.10.2.2.5.1.17 |
Low event threshold (decivolts or tenths of milliamps) for
this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcAILowActions |
1.3.6.1.4.1.3052.10.2.2.5.1.18 |
Low event actions for this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcAILowTrapnum |
1.3.6.1.4.1.3052.10.2.2.5.1.19 |
Low event trap number for this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcAILowClass |
1.3.6.1.4.1.3052.10.2.2.5.1.20 |
Low event class for this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcAIVlowValue |
1.3.6.1.4.1.3052.10.2.2.5.1.21 |
Very low event threshold (decivolts or tenths of milliamps)
for this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcAIVlowActions |
1.3.6.1.4.1.3052.10.2.2.5.1.22 |
Very low event actions for this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcAIVlowTrapnum |
1.3.6.1.4.1.3052.10.2.2.5.1.23 |
Very low event actions for this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcAIVlowClass |
1.3.6.1.4.1.3052.10.2.2.5.1.24 |
Very low event class for this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcAIConvUnitName |
1.3.6.1.4.1.3052.10.2.2.5.1.25 |
Converstion unit name for this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcAIConvHighValue |
1.3.6.1.4.1.3052.10.2.2.5.1.26 |
Conversion high value for this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcAIConvHighUnit |
1.3.6.1.4.1.3052.10.2.2.5.1.27 |
Conversion high unit value for this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcAIConvHighSign |
1.3.6.1.4.1.3052.10.2.2.5.1.28 |
Conversion high sign for this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
espcAIConvLowValue |
1.3.6.1.4.1.3052.10.2.2.5.1.29 |
Conversion low value for this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcAIConvLowUnit |
1.3.6.1.4.1.3052.10.2.2.5.1.30 |
Conversion unit low unit value for this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
espcAIConvLowSign |
1.3.6.1.4.1.3052.10.2.2.5.1.31 |
Conversion low sign for this analog input sensor |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
numberPorts |
1.3.6.1.4.1.3052.10.2.3.1 |
Number of RS-232 ports found.
Range: 2 or 4 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
portConfigTable |
1.3.6.1.4.1.3052.10.2.3.2 |
Port config table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
PortConfig |
|
portConfigEntry |
1.3.6.1.4.1.3052.10.2.3.2.1 |
Port config entry |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
PortConfig |
|
|
portConfigIndex |
1.3.6.1.4.1.3052.10.2.3.2.1.1 |
Index for ports |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..16 |
|
portConfigBaud |
1.3.6.1.4.1.3052.10.2.3.2.1.2 |
Baud rate, 19200, 9600, etc. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
portConfigStripPtOutputLfs |
1.3.6.1.4.1.3052.10.2.3.2.1.4 |
Strip passthrough LFs sent to device on this port:
1=yes, 0=no. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
portConfigMaskEnable |
1.3.6.1.4.1.3052.10.2.3.2.1.7 |
1=Use the character mask on this port. 0=Do
not use the mask. When the mask is enabled,
the following ASCII characters are ignored
on the port:
0, 1, 4-9, 11, 12, 14-31, 128-255.
When the mask is disabled, all characters are
accepted on the port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
portConfigDAEnable |
1.3.6.1.4.1.3052.10.2.3.2.1.8 |
1=Enable the Data Alarm Evaluator for data
on this port. 0=Do not evaluate data on this
port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
portConfigRecordTimeout |
1.3.6.1.4.1.3052.10.2.3.2.1.10 |
Timeout after last unterminated data received upon
which data collected so far is stored as a record. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
portConfigDataType |
1.3.6.1.4.1.3052.10.2.3.2.1.11 |
How the port interprets incoming data: ASCII/BINARY |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
portConfigEtxToCRLF |
1.3.6.1.4.1.3052.10.2.3.2.1.12 |
ON/OFF whether the port translates incoming ETX to CRLF |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
portConfigMLREnable |
1.3.6.1.4.1.3052.10.2.3.2.1.13 |
ON/OFF Whether Multiline Records are collected on this port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
portConfigMLRStartField1Text |
1.3.6.1.4.1.3052.10.2.3.2.1.15 |
Text to match MLR start field 1 |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
portConfigMLRStartField2Text |
1.3.6.1.4.1.3052.10.2.3.2.1.17 |
Text to match MLR start field 2 |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
portConfigMLRNumLinesBefore |
1.3.6.1.4.1.3052.10.2.3.2.1.18 |
Number of lines before the starting line which should
be included in the MLR |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
portConfigMLREndDetection |
1.3.6.1.4.1.3052.10.2.3.2.1.19 |
How the MLR parser determines what ends an MLR: by FORMULA,
number of lines received so far (COUNT), or number of blank
lines received so far (BLANKS) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
portConfigMLRLineCount |
1.3.6.1.4.1.3052.10.2.3.2.1.20 |
Number of lines in the MLR (used by the end detection mode) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
portConfigMLREndField1Text |
1.3.6.1.4.1.3052.10.2.3.2.1.22 |
Text to match MLR end field 1 |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
portConfigMLREndField2Text |
1.3.6.1.4.1.3052.10.2.3.2.1.24 |
Text to match MLR end field 2 |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
portConfigBufferPT |
1.3.6.1.4.1.3052.10.2.3.2.1.26 |
ON/OFF records received during passthrough mode are
buffered/stored in the database |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
portConfigId |
1.3.6.1.4.1.3052.10.2.3.2.1.27 |
The text identifer for the port |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
eth1Mode |
1.3.6.1.4.1.3052.10.2.4.1.1.1.1 |
Mode of the Ethernet1 interface: STATIC,DHCP,VLAN |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
eth1Address |
1.3.6.1.4.1.3052.10.2.4.1.1.1.2 |
Ethernet1 IP address |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth1SubnetMask |
1.3.6.1.4.1.3052.10.2.4.1.1.1.3 |
Ethernet1 subnet mask |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth1Router |
1.3.6.1.4.1.3052.10.2.4.1.1.1.4 |
Ethernet1 router |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth1VLAN1ID |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.1.1 |
Ethernet1 VLAN1 ID |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth1VLAN1Priority |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.1.2 |
Ethernet1 VLAN1 priority |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth1VLAN1Address |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.1.3 |
Ethernet1 VLAN1 IP address |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth1VLAN1SubnetMask |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.1.4 |
Ethernet1 VLAN1 subnet mask |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth1VLAN1Router |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.1.5 |
Ethernet1 VLAN1 router |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth1VLAN2ID |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.2.1 |
Ethernet1 VLAN2 ID |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth1VLAN2Priority |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.2.2 |
Ethernet1 VLAN2 priority |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth1VLAN2Address |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.2.3 |
Ethernet1 VLAN2 IP address |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth1VLAN2SubnetMask |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.2.4 |
Ethernet1 VLAN2 subnet mask |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth1VLAN2Router |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.2.5 |
Ethernet1 VLAN2 router |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth1VLAN3ID |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.3.1 |
Ethernet1 VLAN3 ID |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth1VLAN3Priority |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.3.2 |
Ethernet1 VLAN3 priority |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth1VLAN3Address |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.3.3 |
Ethernet1 VLAN3 IP address |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth1VLAN3SubnetMask |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.3.4 |
Ethernet1 VLAN3 subnet mask |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth1VLAN3Router |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.3.5 |
Ethernet1 VLAN3 router |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth1VLAN4ID |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.4.1 |
Ethernet1 VLAN4 ID |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth1VLAN4Priority |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.4.2 |
Ethernet1 VLAN4 priority |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth1VLAN4Address |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.4.3 |
Ethernet1 VLAN4 IP address |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth1VLAN4SubnetMask |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.4.4 |
Ethernet1 VLAN4 subnet mask |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth1VLAN4Router |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.4.5 |
Ethernet1 VLAN4 router |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth1VLAN5ID |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.5.1 |
Ethernet1 VLAN5 ID |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth1VLAN5Priority |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.5.2 |
Ethernet1 VLAN5 priority |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth1VLAN5Address |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.5.3 |
Ethernet1 VLAN5 IP address |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth1VLAN5SubnetMask |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.5.4 |
Ethernet1 VLAN5 subnet mask |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth1VLAN5Router |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.5.5 |
Ethernet1 VLAN5 router |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth1VLAN6ID |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.6.1 |
Ethernet1 VLAN6 ID |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth1VLAN6Priority |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.6.2 |
Ethernet1 VLAN6 priority |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth1VLAN6Address |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.6.3 |
Ethernet1 VLAN6 IP address |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth1VLAN6SubnetMask |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.6.4 |
Ethernet1 VLAN6 subnet mask |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth1VLAN6Router |
1.3.6.1.4.1.3052.10.2.4.1.1.1.5.6.5 |
Ethernet1 VLAN6 router |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth1MAC |
1.3.6.1.4.1.3052.10.2.4.1.1.1.6 |
Ethernet1 MAC |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
eth2Mode |
1.3.6.1.4.1.3052.10.2.4.1.1.2.1 |
Mode of the Ethernet2 interface: STATIC,DHCP,VLAN |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
eth2Address |
1.3.6.1.4.1.3052.10.2.4.1.1.2.2 |
Ethernet2 IP address |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth2SubnetMask |
1.3.6.1.4.1.3052.10.2.4.1.1.2.3 |
Ethernet2 subnet mask |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth2Router |
1.3.6.1.4.1.3052.10.2.4.1.1.2.4 |
Ethernet2 router |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth2VLAN1ID |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.1.1 |
Ethernet2 VLAN1 ID |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth2VLAN1Priority |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.1.2 |
Ethernet2 VLAN1 priority |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth2VLAN1Address |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.1.3 |
Ethernet2 VLAN1 IP address |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth2VLAN1SubnetMask |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.1.4 |
Ethernet2 VLAN1 subnet mask |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth2VLAN1Router |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.1.5 |
Ethernet2 VLAN1 router |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth2VLAN2ID |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.2.1 |
Ethernet2 VLAN2 ID |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth2VLAN2Priority |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.2.2 |
Ethernet2 VLAN2 priority |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth2VLAN2Address |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.2.3 |
Ethernet2 VLAN2 IP address |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth2VLAN2SubnetMask |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.2.4 |
Ethernet2 VLAN2 subnet mask |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth2VLAN2Router |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.2.5 |
Ethernet2 VLAN2 router |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth2VLAN3ID |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.3.1 |
Ethernet2 VLAN3 ID |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth2VLAN3Priority |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.3.2 |
Ethernet2 VLAN3 priority |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth2VLAN3Address |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.3.3 |
Ethernet2 VLAN3 IP address |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth2VLAN3SubnetMask |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.3.4 |
Ethernet2 VLAN3 subnet mask |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth2VLAN3Router |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.3.5 |
Ethernet2 VLAN3 router |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth2VLAN4ID |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.4.1 |
Ethernet2 VLAN4 ID |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth2VLAN4Priority |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.4.2 |
Ethernet2 VLAN4 priority |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth2VLAN4Address |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.4.3 |
Ethernet2 VLAN4 IP address |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth2VLAN4SubnetMask |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.4.4 |
Ethernet2 VLAN4 subnet mask |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth2VLAN4Router |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.4.5 |
Ethernet2 VLAN4 router |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth2VLAN5ID |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.5.1 |
Ethernet2 VLAN5 ID |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth2VLAN5Priority |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.5.2 |
Ethernet2 VLAN5 priority |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth2VLAN5Address |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.5.3 |
Ethernet2 VLAN5 IP address |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth2VLAN5SubnetMask |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.5.4 |
Ethernet2 VLAN5 subnet mask |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth2VLAN5Router |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.5.5 |
Ethernet2 VLAN5 router |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth2VLAN6ID |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.6.1 |
Ethernet2 VLAN6 ID |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth2VLAN6Priority |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.6.2 |
Ethernet2 VLAN6 priority |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth2VLAN6Address |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.6.3 |
Ethernet2 VLAN6 IP address |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth2VLAN6SubnetMask |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.6.4 |
Ethernet2 VLAN6 subnet mask |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth2VLAN6Router |
1.3.6.1.4.1.3052.10.2.4.1.1.2.5.6.5 |
Ethernet2 VLAN6 router |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
eth2MAC |
1.3.6.1.4.1.3052.10.2.4.1.1.2.6 |
Ethernet2 MAC |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
dnsTable |
1.3.6.1.4.1.3052.10.2.4.3 |
DNS server address table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
DNSConfig |
|
dnsEntry |
1.3.6.1.4.1.3052.10.2.4.3.1 |
DNS server address entry |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
DNSConfig |
|
|
dnsIndex |
1.3.6.1.4.1.3052.10.2.4.3.1.1 |
Index for DNS server address |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..2 |
|
dnsAddress |
1.3.6.1.4.1.3052.10.2.4.3.1.2 |
DNS server address |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
hostname |
1.3.6.1.4.1.3052.10.2.4.4 |
The hostname of the unit |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
hostTable |
1.3.6.1.4.1.3052.10.2.4.5 |
Static host table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HostConfig |
|
hostEntry |
1.3.6.1.4.1.3052.10.2.4.5.1 |
Static host entry |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HostConfig |
|
|
hostIndex |
1.3.6.1.4.1.3052.10.2.4.5.1.1 |
Index for static host |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..2 |
|
hostDeclaration |
1.3.6.1.4.1.3052.10.2.4.5.1.2 |
Static host declaration string (i.e. 'address hostname') |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
ncpDuplex |
1.3.6.1.4.1.3052.10.2.4.6 |
For network command processor: 1=Input characters are echoed; 0=no echo. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
ncpTimeout |
1.3.6.1.4.1.3052.10.2.4.7 |
Network command processor inactivity timeout |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
snmpAgentEnable |
1.3.6.1.4.1.3052.10.2.4.8.1 |
ON/OFF for snmp agent |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
snmpNtfnAttempts |
1.3.6.1.4.1.3052.10.2.4.8.7.1 |
Maximum of times the unit attempts to send a notification
(trap/inform) in 1 cycle |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
snmpNtfnTimeout |
1.3.6.1.4.1.3052.10.2.4.8.7.2 |
Number of seconds between retries of sending a notification |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
snmpNtfnCycles |
1.3.6.1.4.1.3052.10.2.4.8.7.3 |
Number of times the unit attempts a group of attempts to send
a notification (a cycle) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
snmpNtfnSnooze |
1.3.6.1.4.1.3052.10.2.4.8.7.4 |
Minutes between cycles |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
snmpProxyTable |
1.3.6.1.4.1.3052.10.2.4.8.8.1 |
Table of SNMP proxy entries |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SNMPProxyTable |
|
snmpProxyEntry |
1.3.6.1.4.1.3052.10.2.4.8.8.1.1 |
Entry for SNMP proxy table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SNMPProxyTable |
|
|
snmpProxyIndex |
1.3.6.1.4.1.3052.10.2.4.8.8.1.1.1 |
Index for SNMP proxy table |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..8 |
|
snmpProxyOIDBranch |
1.3.6.1.4.1.3052.10.2.4.8.8.1.1.2 |
The OID branch to trigger the proxy function. This should cover
the device to proxy. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
snmpProxyIP |
1.3.6.1.4.1.3052.10.2.4.8.8.1.1.3 |
The IP address of the device to proxy. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
snmpProxyPort |
1.3.6.1.4.1.3052.10.2.4.8.8.1.1.4 |
The UDP port on which the device to proxy listens. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..65535 |
|
snmpPMode |
1.3.6.1.4.1.3052.10.2.4.8.9.1 |
Mode of poll operation: OFF, POLL ONLY (just make the results
available to view), or POLL BUFFER (store the results). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
snmpPBufferFile |
1.3.6.1.4.1.3052.10.2.4.8.9.2 |
CRDB file in which data is stored. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
snmpPBufferAllPeriod |
1.3.6.1.4.1.3052.10.2.4.8.9.3 |
Period (in seconds) that, if non-zero, all results are buffered
in the CRDB regardless of the threshold. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
snmpPRequestEntry |
1.3.6.1.4.1.3052.10.2.4.8.9.4.1 |
Entry for table pf SNMP Poll requests. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SNMPPollRequestConfig |
|
|
snmpPRequestIndex |
1.3.6.1.4.1.3052.10.2.4.8.9.4.1.1 |
Index for table of SNMP Poll requests. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..64 |
|
snmpPRequestDescription |
1.3.6.1.4.1.3052.10.2.4.8.9.4.1.2 |
A description for this single telemetry request; no functional effect. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
snmpPRequestAgent |
1.3.6.1.4.1.3052.10.2.4.8.9.4.1.3 |
SNMP Agent IP address or hostname for this single telemetry request. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
snmpPRequestReadcom |
1.3.6.1.4.1.3052.10.2.4.8.9.4.1.4 |
SNMP read community for this single telemetry request. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
snmpPRequestOID |
1.3.6.1.4.1.3052.10.2.4.8.9.4.1.5 |
SNMP object identifier for this single telemetry request. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
snmpPRequestPeriod |
1.3.6.1.4.1.3052.10.2.4.8.9.4.1.6 |
How many seconds between periodic SNMP polls of this
single telemetry request. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..255 |
|
snmpPRequestID |
1.3.6.1.4.1.3052.10.2.4.8.9.4.1.7 |
A textual field that is part of the record containing
the telemetry result. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
snmpPRequestThreshold |
1.3.6.1.4.1.3052.10.2.4.8.9.4.1.8 |
Controls when new data is stored upon a successful
telemetry request. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
ftpPushEnable |
1.3.6.1.4.1.3052.10.2.4.9.1 |
Enable FTP push for REGULAR (protocol: FTP) or SECURE (protocol:
SFTP) operation, or disable it (OFF) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
ftpPushServer |
1.3.6.1.4.1.3052.10.2.4.9.2 |
FTP server to which data should be pushed |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
ftpPushperiod |
1.3.6.1.4.1.3052.10.2.4.9.7 |
Minutes between pushes |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
ftpPushPushFileEntry |
1.3.6.1.4.1.3052.10.2.4.9.8.1 |
Entry for table of files to push |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
FTPPushPushFileConfig |
|
|
ftpPushPushFileIndex |
1.3.6.1.4.1.3052.10.2.4.9.8.1.1 |
Index for table of files to push |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..16 |
|
ftpPushRemoteFileEntry |
1.3.6.1.4.1.3052.10.2.4.9.11.1 |
Entry for table of remote names of files to push |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
FTPPushRemoteFileConfig |
|
|
ftpPushRemoteFileIndex |
1.3.6.1.4.1.3052.10.2.4.9.11.1.1 |
Index for table of remote names of files to push |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..16 |
|
ftpPushIncludeDate |
1.3.6.1.4.1.3052.10.2.4.9.14 |
ON/OFF include the date in the name of the pushed file |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
ftpPushIncludeTime |
1.3.6.1.4.1.3052.10.2.4.9.15 |
ON/OFF include the time in the name of the pushed file |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
ftpPushIncludeSeq |
1.3.6.1.4.1.3052.10.2.4.9.16 |
ON/OFF include a sequence number in the name of the pushed file |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
pppDialEnable |
1.3.6.1.4.1.3052.10.2.4.10.1.1 |
ON/OFF PPP dialout enabled |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
pppDialIdleTimeout |
1.3.6.1.4.1.3052.10.2.4.10.1.5 |
Seconds of inactivity after which the unit disconnects |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
pppDialRetries |
1.3.6.1.4.1.3052.10.2.4.10.1.6 |
Number of dialing retries for PPP |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
pppDialCDTimeout |
1.3.6.1.4.1.3052.10.2.4.10.1.7 |
Number of seconds to wait after dialing for CD before
giving up |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
pppDialLoginTimeout |
1.3.6.1.4.1.3052.10.2.4.10.1.8 |
Seconds to wait to negotiate PPP after connecting |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
pppDialMdmInit |
1.3.6.1.4.1.3052.10.2.4.10.1.9 |
Modem init string to use when dialing PPP |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
pppDialSuggestIP |
1.3.6.1.4.1.3052.10.2.4.10.1.10 |
IP address to suggest as the unit's end (local end) of the
PPP link |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
pppDialPlainLogin |
1.3.6.1.4.1.3052.10.2.4.10.1.11 |
ON/OFF look for login/password prompt before negotiating
PPP |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
pppHostEnable |
1.3.6.1.4.1.3052.10.2.4.10.2.1 |
ON/OFF Unit accepts PPP negotiation |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
pppHostIdleTimeout |
1.3.6.1.4.1.3052.10.2.4.10.2.2 |
Seconds of inactivity after which PPP-hosted link will
terminate |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
pppHostLocalIP |
1.3.6.1.4.1.3052.10.2.4.10.2.3 |
Local IP address to negotiate |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
pppHostRemoteIP |
1.3.6.1.4.1.3052.10.2.4.10.2.4 |
Remote IP address to hand out to PPP peer |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
pppRoutingEnable |
1.3.6.1.4.1.3052.10.2.4.11.1 |
ON/OFF unit routes IP traffic from PPP/Wireless to Ethernet |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
ethRoutingEnable |
1.3.6.1.4.1.3052.10.2.4.11.2 |
ON/OFF unit routes IP traffic from Ethernet to PPP/Wireless |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
ethRoutingNATEnable |
1.3.6.1.4.1.3052.10.2.4.11.3 |
ON/OFF unit applies NAT on routed IP frames egressing the
unit on its PPP interface |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
routingInterface |
1.3.6.1.4.1.3052.10.2.4.11.4 |
When Ethernet routing is enabled (routing.1), this is the
Ethernet interface to which IP frames received on PPP are
routed |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
eth2WanRoutingEnable |
1.3.6.1.4.1.3052.10.2.4.11.5 |
Make ETH2 operate as a WAN port to route outbound traffic
arriving on ETH1. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
ipRestrictionEntry |
1.3.6.1.4.1.3052.10.2.4.12.1.1.1 |
Entry for table of IP restrictions |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IPRestrictionConfig |
|
|
ipRestrictionIndex |
1.3.6.1.4.1.3052.10.2.4.12.1.1.1.1 |
Index for table of IP restrictions |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..8 |
|
rtsFileTable |
1.3.6.1.4.1.3052.10.2.4.13.1 |
Table of RTS files |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
RTSFileConfig |
|
rtsFileEntry |
1.3.6.1.4.1.3052.10.2.4.13.1.1 |
Entry for table of RTS files |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RTSFileConfig |
|
|
rtsFileIndex |
1.3.6.1.4.1.3052.10.2.4.13.1.1.1 |
Index for table of RTS files |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..16 |
|
rtsFileMode |
1.3.6.1.4.1.3052.10.2.4.13.1.1.2 |
RTS mode (OFF,LISTEN,PUSH) for FILEx |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
rtsFileShowAnswer |
1.3.6.1.4.1.3052.10.2.4.13.1.1.3 |
Show answer string upon RTS connect for FILEx |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
rtsFileReqXON |
1.3.6.1.4.1.3052.10.2.4.13.1.1.4 |
ON/OFF require XON to start flow for FILEx |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
rtsFileTimeout |
1.3.6.1.4.1.3052.10.2.4.13.1.1.5 |
Idle connection close timer (0 means no timeout) for FILEx |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
rtsFileEmptyClose |
1.3.6.1.4.1.3052.10.2.4.13.1.1.6 |
ON/OFF close the socket when FILEx is empty |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
rtsFilePushHost |
1.3.6.1.4.1.3052.10.2.4.13.1.1.7 |
Host to which FILEx should be pushed via RTS |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
rtsFilePushPort |
1.3.6.1.4.1.3052.10.2.4.13.1.1.8 |
TCP port to which FILEx should be pushed via RTS |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
rtsFilePushRetryTimer |
1.3.6.1.4.1.3052.10.2.4.13.1.1.9 |
Retry timer (seconds) for retrying failed RTS push connect
attempts |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
rtsAlarmsMode |
1.3.6.1.4.1.3052.10.2.4.13.2.1 |
RTS mode (OFF,LISTEN,PUSH) for alarms file |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
rtsAlarmsShowAnswer |
1.3.6.1.4.1.3052.10.2.4.13.2.2 |
Show answer string upon RTS connect for alarms file |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
rtsAlarmsReqXON |
1.3.6.1.4.1.3052.10.2.4.13.2.3 |
ON/OFF require XON to start flow for alarms file |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
rtsAlarmsTimeout |
1.3.6.1.4.1.3052.10.2.4.13.2.4 |
Idle connection close timer (0 means no timeout) for alarms
file |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
rtsAlarmsEmptyClose |
1.3.6.1.4.1.3052.10.2.4.13.2.5 |
ON/OFF close the socket when this file is empty for alarms
file |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
rtsAlarmsPushHost |
1.3.6.1.4.1.3052.10.2.4.13.2.6 |
Host to which alarms file should be pushed via RTS |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
rtsAlarmsPushPort |
1.3.6.1.4.1.3052.10.2.4.13.2.7 |
TCP port to which alarms file should be pushed via RTS |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
rtsAlarmsPushRetryTimer |
1.3.6.1.4.1.3052.10.2.4.13.2.8 |
Retry timer (seconds) for retrying failed RTS push connect
attempts |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
trapIncludeDateTime |
1.3.6.1.4.1.3052.10.2.4.14.1.1 |
ON/OFF include date and time in stock trap message |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
trapIncludeUDName |
1.3.6.1.4.1.3052.10.2.4.14.1.4 |
ON/OFF include user defined name in stock trap message |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
trapIncludeUDState |
1.3.6.1.4.1.3052.10.2.4.14.1.5 |
ON/OFF include user defined state in stock trap message |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
trapIncludeSourceAddress |
1.3.6.1.4.1.3052.10.2.4.14.1.6 |
ON/OFF include source IP address in stock trap message |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
trapAuthFailEnable |
1.3.6.1.4.1.3052.10.2.4.14.2 |
ON/OFF enable trap sent upon SNMP authentication failure |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
routeTestPeriod |
1.3.6.1.4.1.3052.10.2.4.15.2 |
The period which a route is considered valid |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
routeTestAddressEntry |
1.3.6.1.4.1.3052.10.2.4.15.3.1 |
Entry for table of RTS files |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RouteTestConfig |
|
|
routeTestAddress |
1.3.6.1.4.1.3052.10.2.4.15.3.1.2 |
Address to ping to see if the route to it is valid |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wirelessMode |
1.3.6.1.4.1.3052.10.2.4.16.1 |
Wireless mode (OFF,PERMANENT-EDGE) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wirelessAPN |
1.3.6.1.4.1.3052.10.2.4.16.2 |
Wireless access point name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wirelessPIN |
1.3.6.1.4.1.3052.10.2.4.16.5 |
Wireless modem SIM PIN |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wirelessDRE |
1.3.6.1.4.1.3052.10.2.4.16.9 |
Default route enable for wireless network interface.
When this is ON, the wireless link, if up, becomes
the default route, overriding the default route setting
(defaultRouter object). When OFF, the default route
setting controls the default route and the wireless link
does not become the default route. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
emailServer |
1.3.6.1.4.1.3052.10.2.4.17.1 |
SMTP server to which the unit sends email |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
emailDomain |
1.3.6.1.4.1.3052.10.2.4.17.2 |
Domain to use in recipient address |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
arpFilter |
1.3.6.1.4.1.3052.10.2.4.18.1 |
ARP filter code |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
webEnable |
1.3.6.1.4.1.3052.10.2.4.19.1 |
ON/OFF for the web interface |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
webPort |
1.3.6.1.4.1.3052.10.2.4.19.2 |
TCP port on which web interface listens |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
webTimeout |
1.3.6.1.4.1.3052.10.2.4.19.3 |
Web interface session timeout (seconds) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
ethExpanIp |
1.3.6.1.4.1.3052.10.2.4.20.1 |
IPv4 address of the unit reachable by nodes on the network interface
consisting of the Ethernet Expansion Card(s). If this is default
(0.0.0.0), then each card will still convey Ethernet traffic
(acting as Ethernet switch) among its nodes but those nodes will not
be able to communicate with the unit. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
ethExpanMask |
1.3.6.1.4.1.3052.10.2.4.20.2 |
IPv4 subnet mask for the Ethernet Expansion network interface. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
ethExpanCardEntry |
1.3.6.1.4.1.3052.10.2.4.20.3.1 |
Entry for table of Ethernet Expansion cards |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EthernetExpansionCardConfig |
|
|
ethExpanCardIndex |
1.3.6.1.4.1.3052.10.2.4.20.3.1.1 |
Index for table of Ethernet Expansion cards |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..2 |
|
ethExpanCardMAC |
1.3.6.1.4.1.3052.10.2.4.20.3.1.2 |
MAC address for each Ethernet Expansion Card that is bridged
together to form the Ethernet Expansion network interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
ethExpanDHCPStartIp |
1.3.6.1.4.1.3052.10.2.4.20.6.1 |
Starting IP address for serving DHCP addresses on the Ethernet
Expansion network interface. If this is default (0.0.0.0) then
the unit will not run DHCP to serve addresses. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
ethExpanDHCPLeaseTime |
1.3.6.1.4.1.3052.10.2.4.20.6.2 |
Lease time for Ethernet Expansion DHCP clients in minutes. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
modemCallAttempts |
1.3.6.1.4.1.3052.10.2.5.4 |
Max mumber of times the modem should try to call out until
successful connect |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
modemCallDelay |
1.3.6.1.4.1.3052.10.2.5.5 |
Minimum delay (seconds) between callouts |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
modemCmdTimout |
1.3.6.1.4.1.3052.10.2.5.6 |
Number of minutes after which an idle command session via
modem is terminated |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
modemGoto |
1.3.6.1.4.1.3052.10.2.5.7 |
When a user connects, where that user is routed (command
session, passthrough to port 1, passthrough to port 2, etc.) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
modemCLIDEnable |
1.3.6.1.4.1.3052.10.2.5.8.1 |
ON/OFF Calling Line Identification security |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
modemCLIDNumberEntry |
1.3.6.1.4.1.3052.10.2.5.8.2.1 |
Entry for table of CLID numbers |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ModemCLIDNumberConfig |
|
|
modemCLIDNumberIndex |
1.3.6.1.4.1.3052.10.2.5.8.2.1.1 |
Index for table of CLID numbers |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..20 |
|
modemTAP8N1 |
1.3.6.1.4.1.3052.10.2.5.10 |
ON/OFF: use 8N1 data/parity/stop for TAP connections |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
clock |
1.3.6.1.4.1.3052.10.2.8.1 |
Text string for date and time;
e.g. 'SUN 01/02/98 12:34:27'. When setting
this object, only the date and time are
required; the unit will ignore a specified
day of week because it is calculated from
the date and time. When this object is included
in a notification as a varbind, it represents
the time that the triggering event occurred. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
consoleDuplex |
1.3.6.1.4.1.3052.10.2.10.1 |
ON/OFF characters echoed on telnet command session |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
consoleTimeout |
1.3.6.1.4.1.3052.10.2.10.2 |
Minutes of inactivity after which telnet command session is terminated |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
consoleConfirm |
1.3.6.1.4.1.3052.10.2.10.7 |
ON/OFF Prompt to confirm certain actions |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
scTelnetPTLoginRequired |
1.3.6.1.4.1.3052.10.2.11.1.5 |
ON/OFF login required upon connecting via Telnet to pass-
through ports (TCP ports 210x) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
scRTSLoginRequired |
1.3.6.1.4.1.3052.10.2.11.1.6 |
ON/OFF login required upon connecting to RTS (TCP ports 220x) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
scAuthMode |
1.3.6.1.4.1.3052.10.2.11.1.7 |
Authentication mode (USERNAME/PW,PW/USERNAME,PASSWORD ONLY) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
scRightsGroup |
1.3.6.1.4.1.3052.10.2.11.1.8 |
The set of aliases used for the 8 available rights levels |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
scSecret |
1.3.6.1.4.1.3052.10.2.11.1.9 |
Shared secret for challenges |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
secUserTable |
1.3.6.1.4.1.3052.10.2.11.2 |
Table of users |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SecUserConfig |
|
secUserEntry |
1.3.6.1.4.1.3052.10.2.11.2.1 |
Entry for table of users |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SecUserConfig |
|
|
secUserIndex |
1.3.6.1.4.1.3052.10.2.11.2.1.1 |
Index for table of users |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..12 |
|
secUserConnectVia |
1.3.6.1.4.1.3052.10.2.11.2.1.5 |
Methods by which user is allowed to connect:
L=local (console)
T=Telnet
M=modem
F=FTP
R=RTS
S=SSH
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
secUserLoginTo |
1.3.6.1.4.1.3052.10.2.11.2.1.6 |
The function presented to the user upon login (COMMAND,
PASSTHROUGH,MENU) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
secUserAccessFile |
1.3.6.1.4.1.3052.10.2.11.2.1.7 |
The default access file associated with the user |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
secUserPTEscapeTo |
1.3.6.1.4.1.3052.10.2.11.2.1.9 |
The function presented to the user upon escaping pass-
through: currently only MENU |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
secUserPPPType |
1.3.6.1.4.1.3052.10.2.11.2.1.10 |
The kind of PPP access allowed to this user cannot connect
via PPP (NONE), can connect but only to the unit (LOCAL), or
can connect and route to Ethernet (ROUTING) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
secUserRights |
1.3.6.1.4.1.3052.10.2.11.2.1.11 |
The rights level granted to this user |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
secUserChallengeTelnetMode |
1.3.6.1.4.1.3052.10.2.11.2.1.22 |
Telnet challenge mode: when user logs in via telnet, unit
allows access (OFF), presents a challenge (CHALLENGE), or
unit sends a one-time-password (SEND PASSWORD) to a
destination configured by secUserChallengeTelnetSendTo |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
secUserChallengeModemMode |
1.3.6.1.4.1.3052.10.2.11.2.1.23 |
Modem challenge mode: when user logs in via modem, unit
allows access (OFF), presents a challenge (CHALLENGE), sends
a one-time-password (SEND PASSWORD) to a destination
configured by secUserChallengeTelnetSendTo, or dials a
number (CALLBACK) configured with secUserCallbackNumberx |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
secUserChallengeConsoleMode |
1.3.6.1.4.1.3052.10.2.11.2.1.24 |
Console challenge mode: when user logs in via console, unit
allows access (OFF), or presents a challenge (CHALLENGE) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
secUserChallengeTelnetSendTo |
1.3.6.1.4.1.3052.10.2.11.2.1.25 |
Email action used as the destination address for one-time-
password when a user logs in with a challenge mode of
SEND PASSWORD |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
secUserChallengeModemSendTo |
1.3.6.1.4.1.3052.10.2.11.2.1.26 |
Modem action used as the destination phone number for one-
time-password when a user logs in with a challenge mode of
SEND PASSWORD |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
secUserChallengeExpiration |
1.3.6.1.4.1.3052.10.2.11.2.1.27 |
Time (in minutes) after which a one-time-password is sent
that it can be used to log in |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..180 |
|
sfEnable |
1.3.6.1.4.1.3052.10.2.11.3.1 |
ON/OFF enable factory access |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
sfSecret |
1.3.6.1.4.1.3052.10.2.11.3.2 |
Secret used for factory access |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evClassNameEntry |
1.3.6.1.4.1.3052.10.2.12.1.1.1 |
Entry for table of classes |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EventClassConfig |
|
|
evClassNameIndex |
1.3.6.1.4.1.3052.10.2.12.1.1.1.1 |
Index for table of classes |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..12 |
|
evClassName |
1.3.6.1.4.1.3052.10.2.12.1.1.1.2 |
Class name for this slot |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evReminderInterval |
1.3.6.1.4.1.3052.10.2.12.1.2 |
Interval (minutes) between EventSensor reminder events |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..65535 |
|
evLogEnable |
1.3.6.1.4.1.3052.10.2.12.1.3.1 |
ON/OFF enable event log |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evLogStoreAlarm |
1.3.6.1.4.1.3052.10.2.12.1.3.2 |
ON/OFF store data alarms in event log |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evLogMaxSize |
1.3.6.1.4.1.3052.10.2.12.1.3.3 |
max size (in KB) of event log |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
evLogStoreSensor |
1.3.6.1.4.1.3052.10.2.12.1.3.4 |
ON/OFF store EventSensor events in event log |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evLogPrependName |
1.3.6.1.4.1.3052.10.2.12.1.3.6 |
ON/OFF prepend data event name to data alarm records in event
log |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evMgmtReprocess |
1.3.6.1.4.1.3052.10.2.12.1.4.3 |
Number of sensors that have generated events since reset.
Write this to reprocess each sensor's last generated event
since reset. The value to write determines what kind of
events should be reprocessed:
'all': all sensor events
'cc': cc events
'temperature': temperature events
'humidity': humidity events
'analog': analog input events |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evdExitOnTrue |
1.3.6.1.4.1.3052.10.2.12.2.1.1 |
ON/OFF: Data alarm evaluator stops checking record against
alarm equations when it finds an equation that matches |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evdFilterAction |
1.3.6.1.4.1.3052.10.2.12.2.1.2 |
What happens to a record that matches an equation:
REJECT/ACCEPT |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evdWildCardChar |
1.3.6.1.4.1.3052.10.2.12.2.1.3 |
Character (in decimal ASCII code format) used to indicate
wildcards in data alarm equation |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
evdTable |
1.3.6.1.4.1.3052.10.2.12.2.2 |
Table of data events |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
DataEventConfig |
|
evdEntry |
1.3.6.1.4.1.3052.10.2.12.2.2.1 |
Entry for table of data events |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
DataEventConfig |
|
|
evdIndex |
1.3.6.1.4.1.3052.10.2.12.2.2.1.1 |
Index for table of data events |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..1000 |
|
evdEnable |
1.3.6.1.4.1.3052.10.2.12.2.2.1.2 |
ON/OFF enable this data event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evdName |
1.3.6.1.4.1.3052.10.2.12.2.2.1.3 |
Name for this data event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evdEquation |
1.3.6.1.4.1.3052.10.2.12.2.2.1.4 |
Equation for this data event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evdThreshold |
1.3.6.1.4.1.3052.10.2.12.2.2.1.5 |
Number of equation matches that must happen to trigger this
data event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
evdAutoClear |
1.3.6.1.4.1.3052.10.2.12.2.2.1.6 |
ON/OFF this data alarm is automatically cleared (re-armed)
upon reaching the threshold number of matches |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evdClearInterval |
1.3.6.1.4.1.3052.10.2.12.2.2.1.7 |
Interval at which this alarm is automatically cleared (no
bearing with evdAutoClear) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evdClearTime |
1.3.6.1.4.1.3052.10.2.12.2.2.1.8 |
Tie of day (HH:MM) at which this data alarm is cleared (no
bearing with evdAutoClear) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evdActions |
1.3.6.1.4.1.3052.10.2.12.2.2.1.9 |
Actions for this data event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evdClass |
1.3.6.1.4.1.3052.10.2.12.2.2.1.10 |
Class for this data event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evdTrapNum |
1.3.6.1.4.1.3052.10.2.12.2.2.1.11 |
Trap number for this event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
evdMode |
1.3.6.1.4.1.3052.10.2.12.2.2.1.12 |
ALARM/FILTER: what is happens when this data event
triggers: either generate actions (mode=ALARM) )or
ACCEPT/REJECT (via evdFilterAction) the record
(mode=FILTER) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evdFieldEntry |
1.3.6.1.4.1.3052.10.2.12.2.3.1 |
Entry for table of data event fields |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
DataEventFieldConfig |
|
|
evdFieldIndex |
1.3.6.1.4.1.3052.10.2.12.2.3.1.1 |
Index for table of data event fields |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..16 |
|
evdFieldStart |
1.3.6.1.4.1.3052.10.2.12.2.3.1.2 |
Start position (1-based) for this data event field |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
evdFieldLength |
1.3.6.1.4.1.3052.10.2.12.2.3.1.3 |
Number of characters this data event field occupies |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
evdFieldName |
1.3.6.1.4.1.3052.10.2.12.2.3.1.4 |
Start position (1-based) for this data event field |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evdFieldLine |
1.3.6.1.4.1.3052.10.2.12.2.3.1.5 |
Line number (1-based, for multiline records) for this data
event field |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
evdFieldType |
1.3.6.1.4.1.3052.10.2.12.2.3.1.6 |
Alpha/Numeric type for this data event field |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evdMacroEntry |
1.3.6.1.4.1.3052.10.2.12.2.4.1 |
Entry for table of data event macros |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
DataEventMacroConfig |
|
|
evdMacroIndex |
1.3.6.1.4.1.3052.10.2.12.2.4.1.1 |
Index for table of data event macros |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..100 |
|
evdMacroName |
1.3.6.1.4.1.3052.10.2.12.2.4.1.2 |
Name of this macro for use in data event equations |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evdMacroEquation |
1.3.6.1.4.1.3052.10.2.12.2.4.1.3 |
Equation for this data event macro |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evNoData1TrapNum |
1.3.6.1.4.1.3052.10.2.12.3.4 |
Trap number for this no data event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
505..1199 |
|
evNoData1Sched1End |
1.3.6.1.4.1.3052.10.2.12.3.7 |
Schedule 1 end time (HH:MM) for this no data event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evNoData1Sched1Duration |
1.3.6.1.4.1.3052.10.2.12.3.8 |
Duration (minutes) for schedule 1 of this no data event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..65535 |
|
evNoData1Sched2End |
1.3.6.1.4.1.3052.10.2.12.3.10 |
Schedule 2 end time (HH:MM) for this no data event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evNoData1Sched2Duration |
1.3.6.1.4.1.3052.10.2.12.3.11 |
Duration (minutes) for schedule 2 of this no data event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..65535 |
|
evNoData1PortEnableEntry |
1.3.6.1.4.1.3052.10.2.12.3.12.1 |
Entry for table of no data event 1 port enables |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
NoDataEvent1PortEnableConfig |
|
|
evNoData1PortEnableIndex |
1.3.6.1.4.1.3052.10.2.12.3.12.1.1 |
Index for table of no data event 1 port enables |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..16 |
|
evNoData1Exclusions |
1.3.6.1.4.1.3052.10.2.12.3.13 |
Exclusions (space-separated MM/DD-formatted dates) for this
no data event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evNoData1Days |
1.3.6.1.4.1.3052.10.2.12.3.14 |
Days of the week on which this no event is active |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evNoData2TrapNum |
1.3.6.1.4.1.3052.10.2.12.4.4 |
Trap number for this no data event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
505..1199 |
|
evNoData2Sched1End |
1.3.6.1.4.1.3052.10.2.12.4.7 |
Schedule 1 end time (HH:MM) for this no data event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evNoData2Sched1Duration |
1.3.6.1.4.1.3052.10.2.12.4.8 |
Duration (minutes) for schedule 1 of this no data event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..65535 |
|
evNoData2Sched2End |
1.3.6.1.4.1.3052.10.2.12.4.10 |
Schedule 2 end time (HH:MM) for this no data event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evNoData2Sched2Duration |
1.3.6.1.4.1.3052.10.2.12.4.11 |
Duration (minutes) for schedule 2 of this no data event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..65535 |
|
evNoData2PortEnableEntry |
1.3.6.1.4.1.3052.10.2.12.4.12.1 |
Entry for table of no data event 2 port enables |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
NoDataEvent2PortEnableConfig |
|
|
evNoData2PortEnableIndex |
1.3.6.1.4.1.3052.10.2.12.4.12.1.1 |
Index for table of no data event 2 port enables |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..16 |
|
evNoData2Exclusions |
1.3.6.1.4.1.3052.10.2.12.4.13 |
Exclusions (space-separated MM/DD-formatted dates) for this
no data event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evNoData2Days |
1.3.6.1.4.1.3052.10.2.12.4.14 |
Days of the week on which this no event is active |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evSched1Enable |
1.3.6.1.4.1.3052.10.2.12.5.1 |
ON/OFF enable this scheduled event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evSched1TrapNum |
1.3.6.1.4.1.3052.10.2.12.5.4 |
Trap number for this scheduled event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
evSched1Class |
1.3.6.1.4.1.3052.10.2.12.5.5 |
Class for this scheduled event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evSched1Sunday |
1.3.6.1.4.1.3052.10.2.12.5.6 |
Time on Sunday (HH:MM) when this scheduled event triggers |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evSched1Monday |
1.3.6.1.4.1.3052.10.2.12.5.7 |
Time on Monday (HH:MM) when this scheduled event triggers |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evSched1Tuesday |
1.3.6.1.4.1.3052.10.2.12.5.8 |
Time on Tuesday (HH:MM) when this scheduled event triggers |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evSched1Wednesday |
1.3.6.1.4.1.3052.10.2.12.5.9 |
Time on Wednesday (HH:MM) when this scheduled event triggers |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evSched1Thursday |
1.3.6.1.4.1.3052.10.2.12.5.10 |
Time on Thursday (HH:MM) when this scheduled event triggers |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evSched1Friday |
1.3.6.1.4.1.3052.10.2.12.5.11 |
Time on Friday (HH:MM) when this scheduled event triggers |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evSched1Saturday |
1.3.6.1.4.1.3052.10.2.12.5.12 |
Time on Saturday (HH:MM) when this scheduled event triggers |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evSched1Exclusions |
1.3.6.1.4.1.3052.10.2.12.5.13 |
Exclusions (space-separated MM/DD-formatted dates) for this
scheduled event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evSched2Enable |
1.3.6.1.4.1.3052.10.2.12.6.1 |
ON/OFF enable this scheduled event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evSched2TrapNum |
1.3.6.1.4.1.3052.10.2.12.6.4 |
Trap number for this scheduled event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
evSched2Class |
1.3.6.1.4.1.3052.10.2.12.6.5 |
Class for this scheduled event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evSched2Sunday |
1.3.6.1.4.1.3052.10.2.12.6.6 |
Time on Sunday (HH:MM) when this scheduled event triggers |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evSched2Monday |
1.3.6.1.4.1.3052.10.2.12.6.7 |
Time on Monday (HH:MM) when this scheduled event triggers |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evSched2Tuesday |
1.3.6.1.4.1.3052.10.2.12.6.8 |
Time on Tuesday (HH:MM) when this scheduled event triggers |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evSched2Wednesday |
1.3.6.1.4.1.3052.10.2.12.6.9 |
Time on Wednesday (HH:MM) when this scheduled event triggers |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evSched2Thursday |
1.3.6.1.4.1.3052.10.2.12.6.10 |
Time on Thursday (HH:MM) when this scheduled event triggers |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evSched2Friday |
1.3.6.1.4.1.3052.10.2.12.6.11 |
Time on Friday (HH:MM) when this scheduled event triggers |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evSched2Saturday |
1.3.6.1.4.1.3052.10.2.12.6.12 |
Time on Saturday (HH:MM) when this scheduled event triggers |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evSched2Exclusions |
1.3.6.1.4.1.3052.10.2.12.6.13 |
Exclusions (space-separated MM/DD-formatted dates) for this
scheduled event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evShskLowEntry |
1.3.6.1.4.1.3052.10.2.12.7.1 |
Entry for table of serial handshaking low events |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SerialHandshakingLowEventConfig |
|
|
evShskLowIndex |
1.3.6.1.4.1.3052.10.2.12.7.1.1 |
Index for table of serial handshaking low events |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..16 |
|
evShskLowEnable |
1.3.6.1.4.1.3052.10.2.12.7.1.2 |
ON/OFF: enable the serial handshaking low event for this port |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evShskLowActions |
1.3.6.1.4.1.3052.10.2.12.7.1.3 |
Actions for the serial handshaking low event for this port |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evShskLowMessage |
1.3.6.1.4.1.3052.10.2.12.7.1.4 |
Message for the serial handshaking low event for this port |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evShskLowClass |
1.3.6.1.4.1.3052.10.2.12.7.1.5 |
Class for the serial handshaking low event for this port |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evShskLowTrapNum |
1.3.6.1.4.1.3052.10.2.12.7.1.6 |
Trap number for the serial handshaking low event for this port |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
evShskHighEntry |
1.3.6.1.4.1.3052.10.2.12.8.1 |
Entry for table of serial handshaking high events |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SerialHandshakingHighEventConfig |
|
|
evShskHighIndex |
1.3.6.1.4.1.3052.10.2.12.8.1.1 |
Index for table of serial handshaking high events |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..16 |
|
evShskHighEnable |
1.3.6.1.4.1.3052.10.2.12.8.1.2 |
ON/OFF: enable the serial handshaking high event for this
port |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evShskHighActions |
1.3.6.1.4.1.3052.10.2.12.8.1.3 |
Actions for the serial handshaking high event for this port |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evShskHighMessage |
1.3.6.1.4.1.3052.10.2.12.8.1.4 |
Message for the serial handshaking high event for this port |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evShskHighClass |
1.3.6.1.4.1.3052.10.2.12.8.1.5 |
Class for the serial handshaking high event for this port |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evShskHighTrapNum |
1.3.6.1.4.1.3052.10.2.12.8.1.6 |
Trap number for the serial handshaking high event for this
port |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
evNoSensorTimeout |
1.3.6.1.4.1.3052.10.2.12.9.1 |
Timeout (seconds) after which an EventSensor becomes
unresponsive that this event is triggered |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
evNoSensorTrapNum |
1.3.6.1.4.1.3052.10.2.12.9.3 |
Trap number for no sensor event |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
fsGenEntry |
1.3.6.1.4.1.3052.10.2.12.11.1.1 |
Entry for fuel sensor general config table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
FuelSensorConfigGeneral |
|
|
fsGenIndex |
1.3.6.1.4.1.3052.10.2.12.11.1.1.1 |
Which fuel sensor in the fuel sensor general config table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..3 |
|
fsGenName |
1.3.6.1.4.1.3052.10.2.12.11.1.1.2 |
Fuel sensor name. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsGenSensorType |
1.3.6.1.4.1.3052.10.2.12.11.1.1.3 |
Type of fuel sensor in use; NONE disables the fuel sensor. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsGenDistanceUnit |
1.3.6.1.4.1.3052.10.2.12.11.1.1.4 |
Distance units in use when setting and indicating tank dimensions. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsGenRawValueTop |
1.3.6.1.4.1.3052.10.2.12.11.1.1.5 |
Analog input reading corresponding to the SENSOR FULL point. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
fsGenTopOffset |
1.3.6.1.4.1.3052.10.2.12.11.1.1.6 |
Distance, in the specified distance unit, between the SENSOR FULL
point and the TANK FULL point. The value is positive if the
SENSOR FULL point is above the TANK FULL point, and negative if it is
below. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsGenRawValueBottom |
1.3.6.1.4.1.3052.10.2.12.11.1.1.7 |
Analog input reading corresponding to the minimum fluid height
measurable by the fuel sensor. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
fsGenBottomOffset |
1.3.6.1.4.1.3052.10.2.12.11.1.1.8 |
Distance, in the specified distance unit, between the SENSOR EMPTY
point and the TANK EMPTY point. The value is positive if the
SENSOR EMPTY point is above the TANK EMPTY point, and negative if it
is below. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsGenFilterAveraging |
1.3.6.1.4.1.3052.10.2.12.11.1.1.11 |
Fuel sensor filter averaging factor. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
fsGenSysrepEnable |
1.3.6.1.4.1.3052.10.2.12.11.1.1.12 |
Fuel sensor System Reporting enable. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsGenSysrepThreshold |
1.3.6.1.4.1.3052.10.2.12.11.1.1.13 |
Fuel sensor System Reporting threshold (floating point value). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsGenSysrepLimit |
1.3.6.1.4.1.3052.10.2.12.11.1.1.14 |
Fuel sensor System Reporting limit. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
fsGenSysrepPackage |
1.3.6.1.4.1.3052.10.2.12.11.1.1.15 |
Fuel sensor System Reporting package number. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..10 |
|
fsGenSysrepType |
1.3.6.1.4.1.3052.10.2.12.11.1.1.16 |
Fuel sensor ASM profile type. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsTankEntry |
1.3.6.1.4.1.3052.10.2.12.11.2.1 |
Entry for fuel sensor tank config table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
FuelSensorConfigTank |
|
|
fsTankIndex |
1.3.6.1.4.1.3052.10.2.12.11.2.1.1 |
Which fuel sensor in the fuel sensor tank config table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..3 |
|
fsTankHeight |
1.3.6.1.4.1.3052.10.2.12.11.2.1.2 |
Height of the tank, from the TANK EMPTY point to the TANK FULL point,
in the specified distance unit (i.e. TANK HEIGHT). This is a
floating point value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsTankDimA |
1.3.6.1.4.1.3052.10.2.12.11.2.1.3 |
Tank dimension measurement A for certain tank profiles. For
HORIZ OVAL, this is the length of the straight section. This is a
floating point value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsTankDimB |
1.3.6.1.4.1.3052.10.2.12.11.2.1.4 |
Tank dimension measurement B for certain tank profiles. For
HORIZ OVAL, this is the radius of the curved section. This is a
floating point value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsTankVolume |
1.3.6.1.4.1.3052.10.2.12.11.2.1.5 |
How many volume units the tank contains, when full. This is a
floating point value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsTankVolumeUnit |
1.3.6.1.4.1.3052.10.2.12.11.2.1.6 |
Name of the unit representing fluid volume in the tank. This is only
used for display purposes; it does not affect the volume calculation. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsTankShape |
1.3.6.1.4.1.3052.10.2.12.11.2.1.7 |
The shape of the fuel tank. A value of LINEAR produces a fluid
volume reading that is directly proportional to fluid height. The
HORIZ CYL and HORIZ OVAL settings use a hard-coded formula to
calculate the volume. The CUSTOM setting uses a strapping table that
must be configured as well (see fuelSensorCustomTankTable). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fuelSensorCustomTankTable |
1.3.6.1.4.1.3052.10.2.12.11.3 |
This table organizes the custom tank strapping table. Each fuel
sensor has a table of height/volume pairs in service only when the tank
shape (fsTankShape) in CUSTOM. This allows the unit to calculate
volumes for nonstandard tank shapes, to the degree that accurate
height/volume measurements can be configured. This SNMP table has two
indexes: the first for which fuel sensor and the second for which
height/volume pair. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
FuelSensorConfigCustomTankStrapping |
|
fsCustomTankEntry |
1.3.6.1.4.1.3052.10.2.12.11.3.1 |
Entry for fuel sensor custom tank config table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
FuelSensorConfigCustomTankStrapping |
|
|
fsCustomTankIndexFS |
1.3.6.1.4.1.3052.10.2.12.11.3.1.1 |
Which fuel sensor in the fuel sensor tank config table. This is the
first of two indexes for this SNMP table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..3 |
|
fsCustomTankIndexDatum |
1.3.6.1.4.1.3052.10.2.12.11.3.1.2 |
Which hight/volume pair: there are 32 pairs per fuel sensor. This is
the second of two indexes for this SNMP table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..32 |
|
fsCustomTankHeight |
1.3.6.1.4.1.3052.10.2.12.11.3.1.3 |
Height of custom tank height/volume pair. This is a floating point
value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsCustomTankVolume |
1.3.6.1.4.1.3052.10.2.12.11.3.1.4 |
Volume of custom tank height/volume pair. This is a floating point
value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsVolumeEntry |
1.3.6.1.4.1.3052.10.2.12.11.4.1 |
Entry for fuel sensor volume event config table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
FuelSensorConfigVolume |
|
|
fsVolumeIndex |
1.3.6.1.4.1.3052.10.2.12.11.4.1.1 |
Which fuel sensor in the fuel sensor volume event config table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..3 |
|
fsVolumeEnable |
1.3.6.1.4.1.3052.10.2.12.11.4.1.2 |
Enable fuel sensor volume events. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsVolumeDeadband |
1.3.6.1.4.1.3052.10.2.12.11.4.1.3 |
Fuel sensor deadband (hysteresis). This is a floating point value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsVolumeVHighValue |
1.3.6.1.4.1.3052.10.2.12.11.4.1.4 |
Fuel sensor volume very high event threshold value. This is a
floating point value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsVolumeVHighActions |
1.3.6.1.4.1.3052.10.2.12.11.4.1.5 |
Fuel sensor volume very high event threshold actions. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsVolumeVHighTrapNum |
1.3.6.1.4.1.3052.10.2.12.11.4.1.6 |
Fuel sensor volume very high event threshold trap number. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
519..1199 |
|
fsVolumeVHighClass |
1.3.6.1.4.1.3052.10.2.12.11.4.1.7 |
Fuel sensor volume very high event threshold class (severity). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsVolumeHighValue |
1.3.6.1.4.1.3052.10.2.12.11.4.1.8 |
Fuel sensor volume high event threshold value. This is a floating
point value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsVolumeHighActions |
1.3.6.1.4.1.3052.10.2.12.11.4.1.9 |
Fuel sensor volume high event threshold actions. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsVolumeHighTrapNum |
1.3.6.1.4.1.3052.10.2.12.11.4.1.10 |
Fuel sensor volume high event threshold trap number. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
519..1199 |
|
fsVolumeHighClass |
1.3.6.1.4.1.3052.10.2.12.11.4.1.11 |
Fuel sensor volume high event threshold class (severity). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsVolumeNormalTrapNum |
1.3.6.1.4.1.3052.10.2.12.11.4.1.13 |
Fuel sensor volume return to normal trap number. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
519..1199 |
|
fsVolumeNormalClass |
1.3.6.1.4.1.3052.10.2.12.11.4.1.14 |
Fuel sensor volume return to normal class (severity). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsVolumeLowValue |
1.3.6.1.4.1.3052.10.2.12.11.4.1.15 |
Fuel sensor volume low event threshold value. This is a floating
point value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsVolumeLowActions |
1.3.6.1.4.1.3052.10.2.12.11.4.1.16 |
Fuel sensor volume low event threshold actions. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsVolumeLowTrapNum |
1.3.6.1.4.1.3052.10.2.12.11.4.1.17 |
Fuel sensor volume low event threshold trap number. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
519..1199 |
|
fsVolumeLowClass |
1.3.6.1.4.1.3052.10.2.12.11.4.1.18 |
Fuel sensor volume low event threshold class (severity). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsVolumeVLowValue |
1.3.6.1.4.1.3052.10.2.12.11.4.1.19 |
Fuel sensor volume very low event threshold value. This is a
floating point value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsVolumeVLowActions |
1.3.6.1.4.1.3052.10.2.12.11.4.1.20 |
Fuel sensor volume very low event threshold actions. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsVolumeVLowTrapNum |
1.3.6.1.4.1.3052.10.2.12.11.4.1.21 |
Fuel sensor volume very low event threshold trap number. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
519..1199 |
|
fsVolumeVLowClass |
1.3.6.1.4.1.3052.10.2.12.11.4.1.22 |
Fuel sensor volume very low event threshold class (severity). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsDiscEntry |
1.3.6.1.4.1.3052.10.2.12.11.5.1 |
Entry for fuel sensor disconnect event config table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
FuelSensorConfigDisconnect |
|
|
fsDiscIndex |
1.3.6.1.4.1.3052.10.2.12.11.5.1.1 |
Which fuel sensor in the fuel sensor disconnect event config table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..3 |
|
fsDiscEnable |
1.3.6.1.4.1.3052.10.2.12.11.5.1.2 |
Fuel sensor disconnect event enable. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsDiscHighValue |
1.3.6.1.4.1.3052.10.2.12.11.5.1.3 |
High end of input value range when fuel sensor is disconnected. This
is in the units of the analog input value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
fsDiscLowValue |
1.3.6.1.4.1.3052.10.2.12.11.5.1.4 |
Low end of input value range when fuel sensor is disconnected. This
is in the units of the analog input value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
fsDiscActions |
1.3.6.1.4.1.3052.10.2.12.11.5.1.5 |
Fuel sensor disconnect event actions. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsDiscTrapNum |
1.3.6.1.4.1.3052.10.2.12.11.5.1.6 |
Fuel sensor disconnect event trap number. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
515..1199 |
|
fsDiscClass |
1.3.6.1.4.1.3052.10.2.12.11.5.1.7 |
Fuel sensor disconnect event class (severity). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsDiscNormalActions |
1.3.6.1.4.1.3052.10.2.12.11.5.1.8 |
Fuel sensor disconnect return to normal actions. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsDiscNormalTrapNum |
1.3.6.1.4.1.3052.10.2.12.11.5.1.9 |
Fuel sensor disconnect return to normal trap number. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
515..1199 |
|
fsDiscNormalClass |
1.3.6.1.4.1.3052.10.2.12.11.5.1.10 |
Fuel sensor disconnect return to normal class (severity). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsSuddenChangeEntry |
1.3.6.1.4.1.3052.10.2.12.11.6.1 |
Entry for fuel sensor sudden change event config table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
FuelSensorConfigSuddenChange |
|
|
fsSuddenChangeIndex |
1.3.6.1.4.1.3052.10.2.12.11.6.1.1 |
Which fuel sensor in the fuel sensor disconnect event config table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..3 |
|
fsSuddenChangeTime |
1.3.6.1.4.1.3052.10.2.12.11.6.1.3 |
Fuel volume sudden change event time (minutes): what duration defines
'sudden'. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
5..360 |
|
fsSuddenChangeAmplitude |
1.3.6.1.4.1.3052.10.2.12.11.6.1.4 |
Fuel volume sudden change event amplitude: what amount (in fuel
volume units) over the duration (fsSuddenChangeTime) defines enough
change. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsSuddenChangeTrapNum |
1.3.6.1.4.1.3052.10.2.12.11.6.1.6 |
Fuel volume sudden change event trap number. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
527..1199 |
|
fsSuddenChangeClass |
1.3.6.1.4.1.3052.10.2.12.11.6.1.7 |
Fuel volume sudden change event class (severity). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsSlowChangeEntry |
1.3.6.1.4.1.3052.10.2.12.11.7.1 |
Entry for fuel sensor slow change event config table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
FuelSensorConfigSlowChange |
|
|
fsSlowChangeIndex |
1.3.6.1.4.1.3052.10.2.12.11.7.1.1 |
Which fuel sensor in the fuel sensor disconnect event config table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..3 |
|
fsSlowChangeTime |
1.3.6.1.4.1.3052.10.2.12.11.7.1.3 |
Fuel volume slow change event time (minutes): what duration defines
'slow'. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..168 |
|
fsSlowChangeAmplitude |
1.3.6.1.4.1.3052.10.2.12.11.7.1.4 |
Fuel volume slow change event amplitude: what amount (in fuel volume
units) over the duration (fsSlowChangeTime) defines enough change. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fsSlowChangeTrapNum |
1.3.6.1.4.1.3052.10.2.12.11.7.1.6 |
Fuel volume slow change event trap number. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
528..1199 |
|
fsSlowChangeClass |
1.3.6.1.4.1.3052.10.2.12.11.7.1.7 |
Fuel volume slow change event class (severity). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmGeneralTable |
1.3.6.1.4.1.3052.10.2.12.12.1 |
This table organizes general AC power monitor attributes. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ACPMConfigGeneral |
|
acpmGenEntry |
1.3.6.1.4.1.3052.10.2.12.12.1.1 |
Entry for AC power monitor general config table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ACPMConfigGeneral |
|
|
acpmGenIndex |
1.3.6.1.4.1.3052.10.2.12.12.1.1.1 |
Which AC power monitor in the AC power monitor general config table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..6 |
|
acpmGenDevice |
1.3.6.1.4.1.3052.10.2.12.12.1.1.2 |
Model of the AC power monitor device. The unit needs this setting to
know which registers to poll for the various data items, among other
things. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmGenName |
1.3.6.1.4.1.3052.10.2.12.12.1.1.3 |
Name for the AC power monitor device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmGenAddress |
1.3.6.1.4.1.3052.10.2.12.12.1.1.4 |
Modbus address of the AC power monitor device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..247 |
|
acpmGenPtRatio |
1.3.6.1.4.1.3052.10.2.12.12.1.1.5 |
Ratio of secondary turns to primary turns on potential transformers
(PT). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..10000 |
|
acpmGenCtRatio |
1.3.6.1.4.1.3052.10.2.12.12.1.1.6 |
Ratio of secondary turns to primary turns on current transformers
(CT). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..10000 |
|
acpmGenSysrepPackage |
1.3.6.1.4.1.3052.10.2.12.12.1.1.8 |
System reporting package number. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..10 |
|
acpmAvgVoltageTable |
1.3.6.1.4.1.3052.10.2.12.12.2 |
This table organizes AC power monitor average voltage attributes. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ACPMConfigAvgVoltage |
|
acpmAvgVoltageEntry |
1.3.6.1.4.1.3052.10.2.12.12.2.1 |
Entry for AC power monitor average voltage config table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ACPMConfigAvgVoltage |
|
|
acpmAvgVoltageIndex |
1.3.6.1.4.1.3052.10.2.12.12.2.1.1 |
Which AC power monitor in the AC power monitor average voltage config
table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..6 |
|
acpmAvgVoltageDeadband |
1.3.6.1.4.1.3052.10.2.12.12.2.1.3 |
Deadband (hysteresis) for average voltage event. This is a floating
point value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmAvgVoltageSysrepThreshold |
1.3.6.1.4.1.3052.10.2.12.12.2.1.24 |
System reporting threshold for average voltage telemetry. This is a
floating point value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmAvgVoltageSysrepLimit |
1.3.6.1.4.1.3052.10.2.12.12.2.1.25 |
System reporting limit for average voltage telemetry. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
acpmAvgCurrentTable |
1.3.6.1.4.1.3052.10.2.12.12.3 |
This table organizes AC power monitor average current attributes. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ACPMConfigAvgCurrent |
|
acpmAvgCurrentEntry |
1.3.6.1.4.1.3052.10.2.12.12.3.1 |
Entry for AC power monitor average current config table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ACPMConfigAvgCurrent |
|
|
acpmAvgCurrentIndex |
1.3.6.1.4.1.3052.10.2.12.12.3.1.1 |
Which AC power monitor in the AC power monitor average current config
table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..6 |
|
acpmAvgCurrentDeadband |
1.3.6.1.4.1.3052.10.2.12.12.3.1.3 |
Deadband (hysteresis) for average current event. This is a floating
point value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmAvgCurrentSysrepThreshold |
1.3.6.1.4.1.3052.10.2.12.12.3.1.24 |
System reporting threshold for average current telemetry. This is
a floating point value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmAvgCurrentSysrepLimit |
1.3.6.1.4.1.3052.10.2.12.12.3.1.25 |
System reporting limit for average current telemetry. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
acpmFreqTable |
1.3.6.1.4.1.3052.10.2.12.12.4 |
This table organizes AC power monitor frequency attributes. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ACPMConfigFreq |
|
acpmFreqEntry |
1.3.6.1.4.1.3052.10.2.12.12.4.1 |
Entry for AC power monitor frequency config table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ACPMConfigFreq |
|
|
acpmFreqIndex |
1.3.6.1.4.1.3052.10.2.12.12.4.1.1 |
Which AC power monitor in the AC power monitor frequency config table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..6 |
|
acpmFreqEnable |
1.3.6.1.4.1.3052.10.2.12.12.4.1.2 |
Enable AC power monitor frequency events. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmFreqDeadband |
1.3.6.1.4.1.3052.10.2.12.12.4.1.3 |
Deadband (hysteresis) for frequency event. This is a floating point
value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmFreqVHighValue |
1.3.6.1.4.1.3052.10.2.12.12.4.1.4 |
Very high event threshold. This is a floating point value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmFreqVHighTrapNum |
1.3.6.1.4.1.3052.10.2.12.12.4.1.6 |
Very high event trap number. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
522..1199 |
|
acpmFreqHighValue |
1.3.6.1.4.1.3052.10.2.12.12.4.1.8 |
High event threshold. This is a floating point value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmFreqHighTrapNum |
1.3.6.1.4.1.3052.10.2.12.12.4.1.10 |
High event trap number. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
522..1199 |
|
acpmFreqNormalTrapNum |
1.3.6.1.4.1.3052.10.2.12.12.4.1.13 |
Return to normal trap number. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
522..1199 |
|
acpmFreqLowValue |
1.3.6.1.4.1.3052.10.2.12.12.4.1.15 |
Low event threshold. This is a floating point value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmFreqLowTrapNum |
1.3.6.1.4.1.3052.10.2.12.12.4.1.17 |
Low event trap number. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
522..1199 |
|
acpmFreqVLowValue |
1.3.6.1.4.1.3052.10.2.12.12.4.1.19 |
Very low event threshold. This is a floating point value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmFreqVLowTrapNum |
1.3.6.1.4.1.3052.10.2.12.12.4.1.21 |
Very low event trap number. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
522..1199 |
|
acpmFreqSysrepEnable |
1.3.6.1.4.1.3052.10.2.12.12.4.1.23 |
System reporting enable for frequency telemetry. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmFreqSysrepThreshold |
1.3.6.1.4.1.3052.10.2.12.12.4.1.24 |
System reporting threshold for frequency telemetry. This is a
floating point value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmFreqSysrepLimit |
1.3.6.1.4.1.3052.10.2.12.12.4.1.25 |
System reporting limit for frequency telemetry. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
acpmTotalRealPowerTable |
1.3.6.1.4.1.3052.10.2.12.12.5 |
This table organizes AC power monitor total real power attributes. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ACPMConfigTRP |
|
acpmTRPEntry |
1.3.6.1.4.1.3052.10.2.12.12.5.1 |
Entry for AC power monitor total real power config table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ACPMConfigTRP |
|
|
acpmTRPIndex |
1.3.6.1.4.1.3052.10.2.12.12.5.1.1 |
Which AC power monitor in the AC power monitor total real power
config table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..6 |
|
acpmTRPEnable |
1.3.6.1.4.1.3052.10.2.12.12.5.1.2 |
Enable AC power monitor total real power events. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmTRPDeadband |
1.3.6.1.4.1.3052.10.2.12.12.5.1.3 |
Deadband (hysteresis) for total real power event. This is a
floating point value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmTRPVHighValue |
1.3.6.1.4.1.3052.10.2.12.12.5.1.4 |
Very high event threshold. This is a floating point value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmTRPVHighTrapNum |
1.3.6.1.4.1.3052.10.2.12.12.5.1.6 |
Very high event trap number. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
523..1199 |
|
acpmTRPHighValue |
1.3.6.1.4.1.3052.10.2.12.12.5.1.8 |
High event threshold. This is a floating point value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmTRPHighTrapNum |
1.3.6.1.4.1.3052.10.2.12.12.5.1.10 |
High event trap number. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
523..1199 |
|
acpmTRPNormalTrapNum |
1.3.6.1.4.1.3052.10.2.12.12.5.1.13 |
Return to normal trap number. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
523..1199 |
|
acpmTRPLowValue |
1.3.6.1.4.1.3052.10.2.12.12.5.1.15 |
Low event threshold. This is a floating point value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmTRPLowTrapNum |
1.3.6.1.4.1.3052.10.2.12.12.5.1.17 |
Low event trap number. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
523..1199 |
|
acpmTRPVLowValue |
1.3.6.1.4.1.3052.10.2.12.12.5.1.19 |
Very low event threshold. This is a floating point value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmTRPVLowTrapNum |
1.3.6.1.4.1.3052.10.2.12.12.5.1.21 |
Very low event trap number. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
523..1199 |
|
acpmTRPSysrepEnable |
1.3.6.1.4.1.3052.10.2.12.12.5.1.23 |
System reporting enable for total real power telemetry. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmTRPSysrepThreshold |
1.3.6.1.4.1.3052.10.2.12.12.5.1.24 |
System reporting threshold for total real power telemetry. This is a
floating point value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
acpmTRPSysrepLimit |
1.3.6.1.4.1.3052.10.2.12.12.5.1.25 |
System reporting limit for total real power telemetry. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
acpmDisconnectTable |
1.3.6.1.4.1.3052.10.2.12.12.6 |
This table organizes AC power monitor device disconnect event
attributes. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ACPMConfigDisconnect |
|
acpmDisconnectEntry |
1.3.6.1.4.1.3052.10.2.12.12.6.1 |
Entry for AC power monitor device disconnect event config table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ACPMConfigDisconnect |
|
|
acpmDisconnectIndex |
1.3.6.1.4.1.3052.10.2.12.12.6.1.1 |
Which AC power monitor in the AC power monitor device disconnect event
config table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..6 |
|
acpmDisconnectTrapNum |
1.3.6.1.4.1.3052.10.2.12.12.6.1.4 |
Trap number for disconnect event. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
524..1199 |
|
acpmTPFEntry |
1.3.6.1.4.1.3052.10.2.12.12.7.1 |
Entry for AC power monitor device total power factor event config
table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ACPMConfigTotalPowerFactor |
|
|
acpmTPFIndex |
1.3.6.1.4.1.3052.10.2.12.12.7.1.1 |
Which AC power monitor in the AC power monitor device disconnect
event config table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..6 |
|
acpmTPFEnable |
1.3.6.1.4.1.3052.10.2.12.12.7.1.2 |
Enable AC power monitor device disconnect event. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evResetEnable |
1.3.6.1.4.1.3052.10.2.12.16.1 |
Enable/disable reset event. This event is triggered when the unit
finishes booting. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evResetDelay |
1.3.6.1.4.1.3052.10.2.12.16.2 |
Number of seconds to wait after unit finishes booting before triggering
the reset event. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..3600 |
|
evResetTrapnum |
1.3.6.1.4.1.3052.10.2.12.16.5 |
Trap number for reset event. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
543..1199 |
|
evResetClass |
1.3.6.1.4.1.3052.10.2.12.16.6 |
Class (severity) for reset event. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
evGlobalTrapnum |
1.3.6.1.4.1.3052.10.2.12.18.3 |
Global trap number. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1199 |
|
actionCallNumberEntry |
1.3.6.1.4.1.3052.10.2.14.1.1 |
Entry for table of phone numbers to dial for modem actions |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ActionCallNumberConfig |
|
|
actionCallNumberIndex |
1.3.6.1.4.1.3052.10.2.14.1.1.1 |
Index for table of phone numbers to dial for modem actions |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..4 |
|
actionCallNumber |
1.3.6.1.4.1.3052.10.2.14.1.1.2 |
The number to dial for this action slot |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
actionSchedEnd |
1.3.6.1.4.1.3052.10.2.14.3.3 |
action schedule end time (HH:MM) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
actionSchedWeekdaysOnly |
1.3.6.1.4.1.3052.10.2.14.3.4 |
ON/OFF whether the action schedule applies to weekdays only
(ON) or all days (OFF) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
actionAsentriaTCPPort |
1.3.6.1.4.1.3052.10.2.14.4.3 |
TCP port used for TCP-based Asentria alarms |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
actionHostTable |
1.3.6.1.4.1.3052.10.2.14.6 |
Table of network hosts to use for network-based actions |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ActionHostConfig |
|
actionHostEntry |
1.3.6.1.4.1.3052.10.2.14.6.1 |
Entry for table of network hosts to use for network-based
actions |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ActionHostConfig |
|
|
actionHostIndex |
1.3.6.1.4.1.3052.10.2.14.6.1.1 |
Index for table of network hosts to use for network-based
actions |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..6 |
|
actionHost |
1.3.6.1.4.1.3052.10.2.14.6.1.2 |
Hostname/IP address used as destination for network-based
action (e.g., trap) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
actionEmailTable |
1.3.6.1.4.1.3052.10.2.14.7 |
Table of email addresses to use for email actions |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ActionEmailConfig |
|
actionEmailEntry |
1.3.6.1.4.1.3052.10.2.14.7.1 |
Entry for table of email addresses to use for email actions |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ActionEmailConfig |
|
|
actionEmailIndex |
1.3.6.1.4.1.3052.10.2.14.7.1.1 |
Index for table of email addresses to use for email actions |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..6 |
|
actionParseError |
1.3.6.1.4.1.3052.10.2.14.8 |
When a user attempts to configure an invalid action setting/
object, this object says why it was invalid. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
sysTimeAutoDST |
1.3.6.1.4.1.3052.10.2.16.1.1 |
ON/OFF automatically adjust for Daylight Savings Time |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
sysTimeGMTOffset |
1.3.6.1.4.1.3052.10.2.16.1.2 |
Absolute value of offset (hours) from GMT of the timezone |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
sysTimeGMTDirection |
1.3.6.1.4.1.3052.10.2.16.1.3 |
Direction (AHEAD/BEHIND) of timezone relative to GMT |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
sysTimeNetHostEntry |
1.3.6.1.4.1.3052.10.2.16.1.4.2.1 |
Entry for table of hosts to use for network time services |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
NetworkTimeHostConfig |
|
|
sysTimeNetHostIndex |
1.3.6.1.4.1.3052.10.2.16.1.4.2.1.1 |
Index for table of hosts to use for network time services |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..6 |
|
sysTimeNetHost |
1.3.6.1.4.1.3052.10.2.16.1.4.2.1.2 |
host to use for network time services |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
sysPTTimeout |
1.3.6.1.4.1.3052.10.2.16.2.1 |
Timeout (minutes) of inactivity after which a pass-through
session is terminated (0 means it never terminates) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
sysPTEndPause |
1.3.6.1.4.1.3052.10.2.16.2.2 |
number of 16ths of a second between escape characters
received on pass-through origin IO handle that are reuired
for the escape characters to register as pass-through escape
characters in the pass-through escape sequence. Set to 0 to
make the escape character register as part of the pass-
through escape sequence without requiring a pause. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
sysMTU |
1.3.6.1.4.1.3052.10.2.16.3 |
Maximum transfer unit for ethernet interfaces |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
sysEscapeCharacter |
1.3.6.1.4.1.3052.10.2.16.7 |
Decimal ASCII code of the system escape character |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
sysLogMode |
1.3.6.1.4.1.3052.10.2.16.9.1 |
Syslog mode: disabled, emit UDP (REMOTE), save in a
rotating file set (FILE), or emit on a listening socket
(SERVER) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
sysLoghost |
1.3.6.1.4.1.3052.10.2.16.9.2 |
Syslog host: destination machine when syslog mode is REMOTE |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
sysLogFilter |
1.3.6.1.4.1.3052.10.2.16.9.3 |
String describing what functions place data in the syslog |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
sysLogFileSize |
1.3.6.1.4.1.3052.10.2.16.9.4 |
Size (in KB) of syslog files (when syslog mode is SERVER or
FILE) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
sysLogFileCount |
1.3.6.1.4.1.3052.10.2.16.9.5 |
Number of files in syslog file set (when syslog mode is
SERVER or FILE) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
sysLogListenPort |
1.3.6.1.4.1.3052.10.2.16.9.6 |
TCP port on which the unit listens for a connection on
which syslog data is dumped (when syslog mode is SERVER) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
sysCRDBCapacity |
1.3.6.1.4.1.3052.10.2.16.10.1 |
Capacity of Call Record Database (in KB) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
sysCRDBFileIDEntry |
1.3.6.1.4.1.3052.10.2.16.10.3.1 |
Entry for table of CRDB file IDs |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
CRDBFileIDConfig |
|
|
sysCRDBFileIDIndex |
1.3.6.1.4.1.3052.10.2.16.10.3.1.1 |
Index for table of CRDB file IDs |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..16 |
|
sysCRDBFileID |
1.3.6.1.4.1.3052.10.2.16.10.3.1.2 |
ID of CRDB file for this port-associated file x |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
sysCRDBFileEnforceMinEntry |
1.3.6.1.4.1.3052.10.2.16.10.4.1 |
Entry for table of CRDB file minimum size enforcement
settings |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
CRDBFileEnforceMinConfig |
|
|
sysCRDBFileEnforceMinIndex |
1.3.6.1.4.1.3052.10.2.16.10.4.1.1 |
Index for table of CRDB file minimum size enforcement
settings |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..24 |
|
sysCharMask |
1.3.6.1.4.1.3052.10.2.16.11 |
Character mask used for ignoring certain characters on
serial ports when assembling data records (when port mode is
ASCII) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
sysPrompt |
1.3.6.1.4.1.3052.10.2.16.12 |
Prompt to use in a commnand session |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
sysBootStatus |
1.3.6.1.4.1.3052.10.2.16.13 |
String describing the boot status of the unit (Booted OK/
still booting |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
sysLocLatitude |
1.3.6.1.4.1.3052.10.2.16.14.1 |
Latitude portion of geographic coordinates as string |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
sysLocLongitude |
1.3.6.1.4.1.3052.10.2.16.14.2 |
Longitude portion of geographic coordinates as string |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
sysLocXOffset |
1.3.6.1.4.1.3052.10.2.16.14.3 |
X-offset portion of geographic coordinates as string |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
sysLocYOffset |
1.3.6.1.4.1.3052.10.2.16.14.4 |
Y offset portion of geographic coordinates as string |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
sysLocAngle |
1.3.6.1.4.1.3052.10.2.16.14.5 |
Angle portion of geographic coordinates as string |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
sysFileTransferStatus |
1.3.6.1.4.1.3052.10.2.16.17.1 |
Start/cancel file transfer, or check transfer status. To start, set this object
to 'start'. To cancel, set this object to 'cancel'. To check status, get the
object |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
sysFileTransferURL |
1.3.6.1.4.1.3052.10.2.16.17.2 |
URL (describing protocol, host, directory, and file) on which file transfer
function operates. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
sysFileTransferUsername |
1.3.6.1.4.1.3052.10.2.16.17.3 |
Username for user account at the resource specified by sysFileTransferURL. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
sysFileTransferPassword |
1.3.6.1.4.1.3052.10.2.16.17.4 |
Password for user account at the resource specified by sysFileTransferURL. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
sysUpdateStatus |
1.3.6.1.4.1.3052.10.2.16.18.1 |
Check time/result of last update attempt. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
auditLogStoreCommands |
1.3.6.1.4.1.3052.10.2.17.3 |
ON/OFF audit log stores commands entered in a command
session |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
auditLogStoreLogins |
1.3.6.1.4.1.3052.10.2.17.7 |
ON/OFF audit log stores when a user was allowed login |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
auditLogStoreSHSK |
1.3.6.1.4.1.3052.10.2.17.8 |
ON/OFF audit log stores serial handshaking status
(regardless of serial handshaking event) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
auditLogMaxSize |
1.3.6.1.4.1.3052.10.2.17.12 |
Maximum size (in KB) of audit log |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
scrDTRCtrlPortEnableEntry |
1.3.6.1.4.1.3052.10.2.18.2.1 |
Entry for table of DTR control port enables |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ScriptingDTRCtrlPortEnableConfig |
|
|
scrDTRCtrlPortEnable |
1.3.6.1.4.1.3052.10.2.18.2.1.2 |
ON/OFF enable DTR control of scripting for this port |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
scrTable |
1.3.6.1.4.1.3052.10.2.18.3 |
Table of scripts |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ScriptingConfig |
|
scrEntry |
1.3.6.1.4.1.3052.10.2.18.3.1 |
Entry for table of scripts |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ScriptingConfig |
|
|
scrIndex |
1.3.6.1.4.1.3052.10.2.18.3.1.1 |
Index for table of scripts |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..20 |
|
scrEnable |
1.3.6.1.4.1.3052.10.2.18.3.1.2 |
ON/OFF enable this script |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
scrName |
1.3.6.1.4.1.3052.10.2.18.3.1.3 |
Name of this script |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
scrFilename |
1.3.6.1.4.1.3052.10.2.18.3.1.4 |
Filename for this script |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
scrRunAlways |
1.3.6.1.4.1.3052.10.2.18.3.1.5 |
ON/OFF: this script always runs |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
scrRunAtStartup |
1.3.6.1.4.1.3052.10.2.18.3.1.6 |
ON/OFF: this script runs at startup |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
scrRunScheduled |
1.3.6.1.4.1.3052.10.2.18.3.1.7 |
ON/OFF: this script runs at a certain time of day |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
scrScheduleTime |
1.3.6.1.4.1.3052.10.2.18.3.1.8 |
Time of day (HH:MM) this script is scheduled to run |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
scrArguments |
1.3.6.1.4.1.3052.10.2.18.3.1.9 |
Arguments for this script |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
scrRepeatInterval |
1.3.6.1.4.1.3052.10.2.18.3.1.10 |
How often this script runs (minutes) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
scrVolatileStringEntry |
1.3.6.1.4.1.3052.10.2.18.4.1 |
Entry for table of volatile script string
settings |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ScriptingVolatileString |
|
|
scrVolatileStringIndex |
1.3.6.1.4.1.3052.10.2.18.4.1.1 |
Index for table of volatile script string
settings |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..50 |
|
scrVolatileString |
1.3.6.1.4.1.3052.10.2.18.4.1.2 |
Volatile string for use in scripts. Use this
object to cache frequently-changing string values
or string values that do not need to persist
through reset. This object corresponds to the
scripting.vstring[] setting key branch; use those
keys in scripts and you can view or change their
values with this object. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
scrVolatileIntEntry |
1.3.6.1.4.1.3052.10.2.18.5.1 |
Entry for table of volatile script integer
settings |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ScriptingVolatileInt |
|
|
scrVolatileIntIndex |
1.3.6.1.4.1.3052.10.2.18.5.1.1 |
Index for table of volatile script integer
settings |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..50 |
|
scrVolatileInt |
1.3.6.1.4.1.3052.10.2.18.5.1.2 |
Volatile integer for use in scripts. Use this
object to cache frequently-changing integer values
or integer values that do not need to persist
through reset. This object corresponds to the
scripting.vint[] setting key branch; use those
keys in scripts and you can view or change their
values with this object. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..2147483647 |
|
scrNonVolatileStringEntry |
1.3.6.1.4.1.3052.10.2.18.6.1 |
Entry for table of non-volatile script string
settings |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ScriptingNonVolatileString |
|
|
scrNonVolatileStringIndex |
1.3.6.1.4.1.3052.10.2.18.6.1.1 |
Index for table of non-volatile script string
settings |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..50 |
|
scrNonVolatileString |
1.3.6.1.4.1.3052.10.2.18.6.1.2 |
Non-volatile string for use in scripts. Use this
object to store values that need to persist
through reset. This object corresponds to the
scripting.nvstring[] setting key branch; use those
keys in scripts and you can view or change their
values with this object. Note: to store frequently-
changing integers, use the scrVolatileString object,
otherwise your scripts may cause unnecessary wear of
the non-volatile storage medium on the unit. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
scrNonVolatileIntEntry |
1.3.6.1.4.1.3052.10.2.18.7.1 |
Entry for table of non-volatile script integer
settings |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ScriptingNonVolatileInt |
|
|
scrNonVolatileIntIndex |
1.3.6.1.4.1.3052.10.2.18.7.1.1 |
Index for table of non-volatile script integer
settings |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..50 |
|
scrNonVolatileInt |
1.3.6.1.4.1.3052.10.2.18.7.1.2 |
Non-volatile integer for use in scripts. Use this
object to store integer values that need to persist
through reset. This object corresponds to the
scripting.nvint[] setting key branch; use those
keys in scripts and you can view or change their
values with this object. Note: to store frequently-
changing integers, use the scrVolatileInt object,
otherwise your scripts may cause unnecessary wear of
the non-volatile storage medium on the unit. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..2147483647 |
|
genSetEnable |
1.3.6.1.4.1.3052.10.2.19.1.1 |
Enable genset functionality; that is, a generator is in use. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
genSetRelayEs |
1.3.6.1.4.1.3052.10.2.19.1.2.1 |
Which EventSensor has the relay which starts the generator. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..200 |
|
genSetRelayPoint |
1.3.6.1.4.1.3052.10.2.19.1.2.2 |
Which relay starts the generator. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..13 |
|
genSetRelayRunningstate |
1.3.6.1.4.1.3052.10.2.19.1.2.3 |
Which relay state corresponds with the generator starting/running. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
genSetCCEnable |
1.3.6.1.4.1.3052.10.2.19.1.3.1 |
Enable generator running detection functionality; that is, the
associated CC is valid for determining if generator is running. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
genSetCCEs |
1.3.6.1.4.1.3052.10.2.19.1.3.2 |
Which CC EventSensor has the CC which is connected to the genertor
running detection monitor. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..200 |
|
genSetCCPoint |
1.3.6.1.4.1.3052.10.2.19.1.3.3 |
Which CC is connected to the genertor running detection monitor. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..64 |
|
genSetCCRunningState |
1.3.6.1.4.1.3052.10.2.19.1.3.4 |
Which CC physical state corresponds with the generator running. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
genRunMode |
1.3.6.1.4.1.3052.10.2.19.2.1 |
Generator Exercising function main operating mode; set to INHIBIT
to inhibit exercising the generator. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
genRunSched |
1.3.6.1.4.1.3052.10.2.19.2.2 |
Schedule number(s) which govern(s) when Generator Exercising function
runs. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
genRunDuration |
1.3.6.1.4.1.3052.10.2.19.2.3 |
Number of seconds that generator should run, started when the
generator needs to start by SCHEDULE or by being forced to start. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
600..3600 |
|
genRunForce |
1.3.6.1.4.1.3052.10.2.19.2.4 |
Write 1 to this to force the generator exercising to start. Always
reads as 0. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
genRunReqasm |
1.3.6.1.4.1.3052.10.2.19.2.5 |
Require ASM connectivity before starting the generator from a schedule. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
genRunStatus |
1.3.6.1.4.1.3052.10.2.19.2.6 |
Status of Generator Exercising function. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
genRunNonstartEventTrap |
1.3.6.1.4.1.3052.10.2.19.2.7.3 |
Trap number for generator non-start event. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
536..1199 |
|
schedTable |
1.3.6.1.4.1.3052.10.2.20.1 |
Table of schedules |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ScheduleConfig |
|
schedEntry |
1.3.6.1.4.1.3052.10.2.20.1.1 |
Entry for table of schedules. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ScheduleConfig |
|
|
schedIndex |
1.3.6.1.4.1.3052.10.2.20.1.1.1 |
Index for table of schedules. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..8 |
|
schedEnable |
1.3.6.1.4.1.3052.10.2.20.1.1.2 |
Enable this schedule. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedStart |
1.3.6.1.4.1.3052.10.2.20.1.1.3 |
This is of the form 'mm/dd/yy hh:mm:ss'. This controls on which
date/time the schedule starts. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatMode |
1.3.6.1.4.1.3052.10.2.20.1.1.4 |
Controls in which way the schedule should repeat. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatFreq |
1.3.6.1.4.1.3052.10.2.20.1.1.5 |
Controls how often the schedule should repeat: every nth day, week,
month, or year. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..400 |
|
schedRepeatEndMode |
1.3.6.1.4.1.3052.10.2.20.1.1.6 |
Controls how the repeating schedule should end. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatEndAfter |
1.3.6.1.4.1.3052.10.2.20.1.1.7 |
Number of times this schedule should be repeated; relevant when the
repeat end mode is AFTER. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..1000 |
|
schedRepeatEndOn |
1.3.6.1.4.1.3052.10.2.20.1.1.8 |
Date/time (in the form 'mm/yy/dd hh:mm:ss' or blank string) after
which repeating should end, relevant when repeat end mode is ON DATE. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatWeeklySun |
1.3.6.1.4.1.3052.10.2.20.1.1.9 |
Run this schedule on Sunday(s); relevant when repeat mode is weekly. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatWeeklyMon |
1.3.6.1.4.1.3052.10.2.20.1.1.10 |
Run this schedule on Monday(s); relevant when repeat mode is weekly. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatWeeklyTue |
1.3.6.1.4.1.3052.10.2.20.1.1.11 |
Run this schedule on Tuesday(s); relevant when repeat mode is weekly. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatWeeklyWed |
1.3.6.1.4.1.3052.10.2.20.1.1.12 |
Run this schedule on Wednesday(s); relevant when repeat mode is weekly. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatWeeklyThu |
1.3.6.1.4.1.3052.10.2.20.1.1.13 |
Run this schedule on Thursday(s); relevant when repeat mode is weekly. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatWeeklyFri |
1.3.6.1.4.1.3052.10.2.20.1.1.14 |
Run this schedule on Friday(s); relevant when repeat mode is weekly. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatWeeklySat |
1.3.6.1.4.1.3052.10.2.20.1.1.15 |
Run this schedule on Saturday(s); relevant when repeat mode is weekly. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatMonthlyMode |
1.3.6.1.4.1.3052.10.2.20.1.1.16 |
EACH means the schedule runs on specific dates of the month. ON THE
means the schedule runs on calculated dates of the month according to
which day that month starts. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatMonthlyDates |
1.3.6.1.4.1.3052.10.2.20.1.1.17 |
Comma-separated list of dates of a month on which this schedule should
run, relevant when repeat monthly mode is EACH. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatMonthlyOnThe |
1.3.6.1.4.1.3052.10.2.20.1.1.18 |
Controls on which day of the month this schedule should run, relevant
when repeat monthly mode is ON THE. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatMonthlyOnDay |
1.3.6.1.4.1.3052.10.2.20.1.1.19 |
Controls the day of week on which this schedule is run, relevant when
repeat monthly mode is ON THE |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatYearlyJan |
1.3.6.1.4.1.3052.10.2.20.1.1.20 |
Run this schedule in January, relevant when repeat mode is YEARLY. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatYearlyFeb |
1.3.6.1.4.1.3052.10.2.20.1.1.21 |
Run this schedule in February, relevant when repeat mode is YEARLY. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatYearlyMar |
1.3.6.1.4.1.3052.10.2.20.1.1.22 |
Run this schedule in March, relevant when repeat mode is YEARLY. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatYearlyApr |
1.3.6.1.4.1.3052.10.2.20.1.1.23 |
Run this schedule in April, relevant when repeat mode is YEARLY. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatYearlyMay |
1.3.6.1.4.1.3052.10.2.20.1.1.24 |
Run this schedule in May, relevant when repeat mode is YEARLY. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatYearlyJun |
1.3.6.1.4.1.3052.10.2.20.1.1.25 |
Run this schedule in June, relevant when repeat mode is YEARLY. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatYearlyJul |
1.3.6.1.4.1.3052.10.2.20.1.1.26 |
Run this schedule in July, relevant when repeat mode is YEARLY. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatYearlyAug |
1.3.6.1.4.1.3052.10.2.20.1.1.27 |
Run this schedule in August, relevant when repeat mode is YEARLY. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatYearlySep |
1.3.6.1.4.1.3052.10.2.20.1.1.28 |
Run this schedule in September, relevant when repeat mode is YEARLY. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatYearlyOct |
1.3.6.1.4.1.3052.10.2.20.1.1.29 |
Run this schedule in October, relevant when repeat mode is YEARLY. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatYearlyNov |
1.3.6.1.4.1.3052.10.2.20.1.1.30 |
Run this schedule in November, relevant when repeat mode is YEARLY. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatYearlyDec |
1.3.6.1.4.1.3052.10.2.20.1.1.31 |
Run this schedule in December, relevant when repeat mode is YEARLY. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatYearlyOnThe |
1.3.6.1.4.1.3052.10.2.20.1.1.32 |
Controls on which day of the month this schedule should run, relevant
when repeat mode is YEARLY. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedRepeatYearlyOnDay |
1.3.6.1.4.1.3052.10.2.20.1.1.33 |
Controls the day of week on which this schedule is run, relevant when
repeat mode is YEARLY. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
schedNextTrigger |
1.3.6.1.4.1.3052.10.2.20.1.1.34 |
When this schedule will next trigger. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
siteName |
1.3.6.1.4.1.3052.10.3.1 |
Site Name string; Max 40 characters. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
thisProduct |
1.3.6.1.4.1.3052.10.3.2 |
This is a factory configured string for the
product name. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
stockTrapString |
1.3.6.1.4.1.3052.10.3.3 |
The message defined for the event that triggers a trap. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
trapEventTypeNumber |
1.3.6.1.4.1.3052.10.3.4 |
The user-defined trap variable for the type of
event that happened. Here are the definitions:
1 Data Alarm
2 CRDBFULL
3 NODATA
4 SCHEDULED
5 IPRCSOCKETDOWN
7 Serial Handshaking Low
8 Serial Handshaking High
10 Contact Closure Active
11 Contact Closure Inactive
12 Temperature High
13 Temperature Very High
14 Temperature Low
15 Temperature Very Low
16 Temperature Return to Normal
17 Humidity High
18 Humidity Very High
19 Humidity Low
20 Humidity Very Low
21 Humidity Return to Normal
26 Analog High
27 Analog Very High
28 Analog Low
29 Analog Very Low
30 Analog Normal
40 EventSensor Unresponsive
100 Contact Closure Active Reminder
101 Temperature High Reminder
102 Temperature High Very Reminder
103 Temperature Low Reminder
104 Temperature Very Low Reminder
105 Humidity High Reminder
106 Humidity Very High Reminder
107 Humidity Low Reminder
108 Humidity Very Low Reminder
109 Analog High Reminder
110 Analog Very High Reminder
111 Analog Low Reminder
112 Analog Very Low Reminder |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
trapEventTypeName |
1.3.6.1.4.1.3052.10.3.5 |
The user-defined trap variable for the string
corresponding to the event type. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
trapIncludedValue |
1.3.6.1.4.1.3052.10.3.6 |
The user-defined trap variable for the generic
included value. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-2147483648..2147483647 |
|
trapIncludedString |
1.3.6.1.4.1.3052.10.3.7 |
The user-defined trap variable for the generic
included string. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
trapTypeString |
1.3.6.1.4.1.3052.10.3.8 |
The cause of the trap, added for DL880 compatibility. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
trapEventClassNumber |
1.3.6.1.4.1.3052.10.3.9 |
The user-defined trap variable for the configurable
class number associated with the triggering event. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
trapEventClassName |
1.3.6.1.4.1.3052.10.3.10 |
The user-defined trap variable for the configurable
class name associated with the class number. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
keyInterface |
1.3.6.1.4.1.3052.10.4 |
This object represents a setting key interface. When
setting this object, the value to set is the 'sk' command
you would enter on the command line (without the 'sk'). To
get the result of the operation, read this object after you
write it.
For example, to configure EventSensor 1 contact closure 34
event actions to be an SNMP InformRequest to host foo, set
this object to:
'event.sensor[1].cc[34].eventactions=inform(foo)'. The SNMP
response is the result of the operation: if setting that key
to that value was a success then the SNMP response will be a
success and the response value will be what you had set. If
you subsequently read this object then you will see a
message 'OK: ...'.
If setting that key to that value failed then the SNMP
response will be a failure (a badValue response). If you
subsequently read this object then the value returned is the
reason that setting that key to that value failed.
For another example, to read user 3's pass-through access
for port 7, set this object to:
'sec.user[3].port[7].ptaccess'. The SNMP response is the
result of the operation: if reading that key is a success
then the SNMP response will be a success and the response
value will be what you had SET (i.e., the opertion of
reading a key, which is just the key itself with no '='
operator, and this is not the key value you want to read).
If you subsequently read this object then the value
returned is the value of the key you want to read.
If reading that key failed (e.g., if the key is invalid)
then the SNMP response to your SNMP set operation (the
value you set being the invalid key to read) will be a
failure (a badValue response). If you subsequently read
this object then the value returned is the reason that
reading that key failed (i.e., 'invalid key'). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
s550notificationsStockTempTrap |
1.3.6.1.4.1.3052.10.0.120 |
A stock temperature trap is issued when a temperature event
happens. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsStockHumidityTrap |
1.3.6.1.4.1.3052.10.0.130 |
A stock humidity trap is issued when a humidity event
happens. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsStockAnalogTrap |
1.3.6.1.4.1.3052.10.0.140 |
A stock analog trap is issued when an analog sensor event
happens. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsStockOutputTrap |
1.3.6.1.4.1.3052.10.0.150 |
A stock output trap is issued when an output event
happens. That is, depending on the configuration,
when an output changes state for any reason, this
trap will be sent. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsStockDbasePfullTrap |
1.3.6.1.4.1.3052.10.0.501 |
The stock database percent full trap is issued
when the database size surpasses the threshold. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsStockDataAlarmTrap |
1.3.6.1.4.1.3052.10.0.503 |
The stock data alarm trap is issued when a
data alarm happens. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsStockNoDataAlarmTrap |
1.3.6.1.4.1.3052.10.0.505 |
The stock no-data alarm trap is issued when
the unit has received no data for a configured
interval within a configured schedule. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsStockSchedTrap |
1.3.6.1.4.1.3052.10.0.506 |
The stock scheduled alarm trap is issued
when the current time reaches the scheduled
alarm time. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsStockCTSTrap |
1.3.6.1.4.1.3052.10.0.510 |
A stock CTS trap is issued when an RS-232 CTS event
happens. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsCPEDownTrap |
1.3.6.1.4.1.3052.10.0.511 |
A stock CPE Down trap is issued when a CPE Down event
happens. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsFuelSensorDisconnectTrap |
1.3.6.1.4.1.3052.10.0.515 |
A stock Fuel Sensor Disconnect trap is issued when a Fuel
Sensor Disconnect or Connect (Return to Normal) event happens. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsFuelSensorVolumeTrap |
1.3.6.1.4.1.3052.10.0.519 |
A stock Fuel Sensor Volume trap is issued when a Fuel
Sensor Volume event happens |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsACPowerMonitorAvgVoltageTrap |
1.3.6.1.4.1.3052.10.0.520 |
A stock AC power monitor average voltage trap is issued when an
AC power monitor average voltage event happens. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsACPowerMonitorAvgCurrentTrap |
1.3.6.1.4.1.3052.10.0.521 |
A stock AC power monitor average current trap is issued when an
AC power monitor average current event happens. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsACPowerMonitorFrequencyTrap |
1.3.6.1.4.1.3052.10.0.522 |
A stock AC power monitor frequency trap is issued when an
AC power monitor frequency event happens. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsACPowerMonitorTRPTrap |
1.3.6.1.4.1.3052.10.0.523 |
A stock AC power monitor TRP (total real power) trap is issued
when an AC power monitor TRP event happens. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsACPowerMonitorDisconnectTrap |
1.3.6.1.4.1.3052.10.0.524 |
A stock AC power monitor disconnect trap is issued
when an AC power monitor disconnect event happens. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsStockScriptTrap |
1.3.6.1.4.1.3052.10.0.526 |
A stock script trap is issued when a script triggers
an event via a_lib.PostEvent() called with no trap
number (or this trap number) specified. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsGeneratorNonStartTrap |
1.3.6.1.4.1.3052.10.0.536 |
A stock Generator Non-start trap is issued
when the unit commands the generator to start as
part of the generator exercising feature, and the
generator fails to register as started after 30
seconds (as detected by CC generator running
detection). |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsACTotalPowerFactorTrap |
1.3.6.1.4.1.3052.10.0.540 |
A stock AC power monitor total power factor trap is issued
when an AC power monitor total power factor event happens. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsResetTrap |
1.3.6.1.4.1.3052.10.0.543 |
A stock reset trap is issued when a reset event happens. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1000 |
1.3.6.1.4.1.3052.10.0.1000 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1000. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1001 |
1.3.6.1.4.1.3052.10.0.1001 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1001. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1002 |
1.3.6.1.4.1.3052.10.0.1002 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1002. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1003 |
1.3.6.1.4.1.3052.10.0.1003 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1003. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1004 |
1.3.6.1.4.1.3052.10.0.1004 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1004. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1005 |
1.3.6.1.4.1.3052.10.0.1005 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1005. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1006 |
1.3.6.1.4.1.3052.10.0.1006 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1006. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1007 |
1.3.6.1.4.1.3052.10.0.1007 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1007. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1008 |
1.3.6.1.4.1.3052.10.0.1008 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1008. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1009 |
1.3.6.1.4.1.3052.10.0.1009 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1009. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1010 |
1.3.6.1.4.1.3052.10.0.1010 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1010. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1011 |
1.3.6.1.4.1.3052.10.0.1011 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1011. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1012 |
1.3.6.1.4.1.3052.10.0.1012 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1012. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1013 |
1.3.6.1.4.1.3052.10.0.1013 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1013. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1014 |
1.3.6.1.4.1.3052.10.0.1014 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1014. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1015 |
1.3.6.1.4.1.3052.10.0.1015 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1015. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1016 |
1.3.6.1.4.1.3052.10.0.1016 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1016. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1017 |
1.3.6.1.4.1.3052.10.0.1017 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1017. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1018 |
1.3.6.1.4.1.3052.10.0.1018 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1018. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1019 |
1.3.6.1.4.1.3052.10.0.1019 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1019. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1020 |
1.3.6.1.4.1.3052.10.0.1020 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1020. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1021 |
1.3.6.1.4.1.3052.10.0.1021 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1021. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1022 |
1.3.6.1.4.1.3052.10.0.1022 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1022. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1023 |
1.3.6.1.4.1.3052.10.0.1023 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1023. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1024 |
1.3.6.1.4.1.3052.10.0.1024 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1024. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1025 |
1.3.6.1.4.1.3052.10.0.1025 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1025. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1026 |
1.3.6.1.4.1.3052.10.0.1026 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1026. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1027 |
1.3.6.1.4.1.3052.10.0.1027 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1027. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1028 |
1.3.6.1.4.1.3052.10.0.1028 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1028. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1029 |
1.3.6.1.4.1.3052.10.0.1029 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1029. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1030 |
1.3.6.1.4.1.3052.10.0.1030 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1030. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1031 |
1.3.6.1.4.1.3052.10.0.1031 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1031. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1032 |
1.3.6.1.4.1.3052.10.0.1032 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1032. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1033 |
1.3.6.1.4.1.3052.10.0.1033 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1033. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1034 |
1.3.6.1.4.1.3052.10.0.1034 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1034. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1035 |
1.3.6.1.4.1.3052.10.0.1035 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1035. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1036 |
1.3.6.1.4.1.3052.10.0.1036 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1036. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1037 |
1.3.6.1.4.1.3052.10.0.1037 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1037. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1038 |
1.3.6.1.4.1.3052.10.0.1038 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1038. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1039 |
1.3.6.1.4.1.3052.10.0.1039 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1039. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1040 |
1.3.6.1.4.1.3052.10.0.1040 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1040. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1041 |
1.3.6.1.4.1.3052.10.0.1041 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1041. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1042 |
1.3.6.1.4.1.3052.10.0.1042 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1042. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1043 |
1.3.6.1.4.1.3052.10.0.1043 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1043. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1044 |
1.3.6.1.4.1.3052.10.0.1044 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1044. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1045 |
1.3.6.1.4.1.3052.10.0.1045 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1045. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1046 |
1.3.6.1.4.1.3052.10.0.1046 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1046. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1047 |
1.3.6.1.4.1.3052.10.0.1047 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1047. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1048 |
1.3.6.1.4.1.3052.10.0.1048 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1048. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1049 |
1.3.6.1.4.1.3052.10.0.1049 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1049. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1050 |
1.3.6.1.4.1.3052.10.0.1050 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1050. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1051 |
1.3.6.1.4.1.3052.10.0.1051 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1051. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1052 |
1.3.6.1.4.1.3052.10.0.1052 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1052. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1053 |
1.3.6.1.4.1.3052.10.0.1053 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1053. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1054 |
1.3.6.1.4.1.3052.10.0.1054 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1054. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1055 |
1.3.6.1.4.1.3052.10.0.1055 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1055. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1056 |
1.3.6.1.4.1.3052.10.0.1056 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1056. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1057 |
1.3.6.1.4.1.3052.10.0.1057 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1057. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1058 |
1.3.6.1.4.1.3052.10.0.1058 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1058. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1059 |
1.3.6.1.4.1.3052.10.0.1059 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1059. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1060 |
1.3.6.1.4.1.3052.10.0.1060 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1060. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1061 |
1.3.6.1.4.1.3052.10.0.1061 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1061. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1062 |
1.3.6.1.4.1.3052.10.0.1062 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1062. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1063 |
1.3.6.1.4.1.3052.10.0.1063 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1063. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1064 |
1.3.6.1.4.1.3052.10.0.1064 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1064. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1065 |
1.3.6.1.4.1.3052.10.0.1065 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1065. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1066 |
1.3.6.1.4.1.3052.10.0.1066 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1066. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1067 |
1.3.6.1.4.1.3052.10.0.1067 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1067. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1068 |
1.3.6.1.4.1.3052.10.0.1068 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1068. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1069 |
1.3.6.1.4.1.3052.10.0.1069 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1069. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1070 |
1.3.6.1.4.1.3052.10.0.1070 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1070. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1071 |
1.3.6.1.4.1.3052.10.0.1071 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1071. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1072 |
1.3.6.1.4.1.3052.10.0.1072 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1072. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1073 |
1.3.6.1.4.1.3052.10.0.1073 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1073. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1074 |
1.3.6.1.4.1.3052.10.0.1074 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1074. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1075 |
1.3.6.1.4.1.3052.10.0.1075 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1075. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1076 |
1.3.6.1.4.1.3052.10.0.1076 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1076. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1077 |
1.3.6.1.4.1.3052.10.0.1077 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1077. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1078 |
1.3.6.1.4.1.3052.10.0.1078 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1078. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1079 |
1.3.6.1.4.1.3052.10.0.1079 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1079. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1080 |
1.3.6.1.4.1.3052.10.0.1080 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1080. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1081 |
1.3.6.1.4.1.3052.10.0.1081 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1081. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1082 |
1.3.6.1.4.1.3052.10.0.1082 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1082. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1083 |
1.3.6.1.4.1.3052.10.0.1083 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1083. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1084 |
1.3.6.1.4.1.3052.10.0.1084 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1084. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1085 |
1.3.6.1.4.1.3052.10.0.1085 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1085. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1086 |
1.3.6.1.4.1.3052.10.0.1086 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1086. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1087 |
1.3.6.1.4.1.3052.10.0.1087 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1087. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1088 |
1.3.6.1.4.1.3052.10.0.1088 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1088. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1089 |
1.3.6.1.4.1.3052.10.0.1089 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1089. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1090 |
1.3.6.1.4.1.3052.10.0.1090 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1090. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1091 |
1.3.6.1.4.1.3052.10.0.1091 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1091. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1092 |
1.3.6.1.4.1.3052.10.0.1092 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1092. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1093 |
1.3.6.1.4.1.3052.10.0.1093 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1093. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1094 |
1.3.6.1.4.1.3052.10.0.1094 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1094. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1095 |
1.3.6.1.4.1.3052.10.0.1095 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1095. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1096 |
1.3.6.1.4.1.3052.10.0.1096 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1096. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1097 |
1.3.6.1.4.1.3052.10.0.1097 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1097. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1098 |
1.3.6.1.4.1.3052.10.0.1098 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1098. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1099 |
1.3.6.1.4.1.3052.10.0.1099 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1099. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1100 |
1.3.6.1.4.1.3052.10.0.1100 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1100. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1101 |
1.3.6.1.4.1.3052.10.0.1101 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1101. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1102 |
1.3.6.1.4.1.3052.10.0.1102 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1102. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1103 |
1.3.6.1.4.1.3052.10.0.1103 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1103. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1104 |
1.3.6.1.4.1.3052.10.0.1104 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1104. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1105 |
1.3.6.1.4.1.3052.10.0.1105 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1105. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1106 |
1.3.6.1.4.1.3052.10.0.1106 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1106. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1107 |
1.3.6.1.4.1.3052.10.0.1107 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1107. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1108 |
1.3.6.1.4.1.3052.10.0.1108 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1108. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1109 |
1.3.6.1.4.1.3052.10.0.1109 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1109. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1110 |
1.3.6.1.4.1.3052.10.0.1110 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1110. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1111 |
1.3.6.1.4.1.3052.10.0.1111 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1111. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1112 |
1.3.6.1.4.1.3052.10.0.1112 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1112. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1113 |
1.3.6.1.4.1.3052.10.0.1113 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1113. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1114 |
1.3.6.1.4.1.3052.10.0.1114 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1114. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1115 |
1.3.6.1.4.1.3052.10.0.1115 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1115. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1116 |
1.3.6.1.4.1.3052.10.0.1116 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1116. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1117 |
1.3.6.1.4.1.3052.10.0.1117 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1117. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1118 |
1.3.6.1.4.1.3052.10.0.1118 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1118. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1119 |
1.3.6.1.4.1.3052.10.0.1119 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1119. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1120 |
1.3.6.1.4.1.3052.10.0.1120 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1120. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1121 |
1.3.6.1.4.1.3052.10.0.1121 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1121. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1122 |
1.3.6.1.4.1.3052.10.0.1122 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1122. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1123 |
1.3.6.1.4.1.3052.10.0.1123 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1123. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1124 |
1.3.6.1.4.1.3052.10.0.1124 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1124. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1125 |
1.3.6.1.4.1.3052.10.0.1125 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1125. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1126 |
1.3.6.1.4.1.3052.10.0.1126 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1126. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1127 |
1.3.6.1.4.1.3052.10.0.1127 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1127. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1128 |
1.3.6.1.4.1.3052.10.0.1128 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1128. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1129 |
1.3.6.1.4.1.3052.10.0.1129 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1129. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1130 |
1.3.6.1.4.1.3052.10.0.1130 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1130. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1131 |
1.3.6.1.4.1.3052.10.0.1131 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1131. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1132 |
1.3.6.1.4.1.3052.10.0.1132 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1132. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1133 |
1.3.6.1.4.1.3052.10.0.1133 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1133. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1134 |
1.3.6.1.4.1.3052.10.0.1134 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1134. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1135 |
1.3.6.1.4.1.3052.10.0.1135 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1135. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1136 |
1.3.6.1.4.1.3052.10.0.1136 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1136. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1137 |
1.3.6.1.4.1.3052.10.0.1137 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1137. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1138 |
1.3.6.1.4.1.3052.10.0.1138 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1138. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1139 |
1.3.6.1.4.1.3052.10.0.1139 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1139. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1140 |
1.3.6.1.4.1.3052.10.0.1140 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1140. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1141 |
1.3.6.1.4.1.3052.10.0.1141 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1141. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1142 |
1.3.6.1.4.1.3052.10.0.1142 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1142. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1143 |
1.3.6.1.4.1.3052.10.0.1143 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1143. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1144 |
1.3.6.1.4.1.3052.10.0.1144 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1144. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1145 |
1.3.6.1.4.1.3052.10.0.1145 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1145. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1146 |
1.3.6.1.4.1.3052.10.0.1146 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1146. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1147 |
1.3.6.1.4.1.3052.10.0.1147 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1147. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1148 |
1.3.6.1.4.1.3052.10.0.1148 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1148. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1149 |
1.3.6.1.4.1.3052.10.0.1149 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1149. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1150 |
1.3.6.1.4.1.3052.10.0.1150 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1150. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1151 |
1.3.6.1.4.1.3052.10.0.1151 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1151. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1152 |
1.3.6.1.4.1.3052.10.0.1152 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1152. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1153 |
1.3.6.1.4.1.3052.10.0.1153 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1153. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1154 |
1.3.6.1.4.1.3052.10.0.1154 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1154. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1155 |
1.3.6.1.4.1.3052.10.0.1155 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1155. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1156 |
1.3.6.1.4.1.3052.10.0.1156 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1156. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1157 |
1.3.6.1.4.1.3052.10.0.1157 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1157. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1158 |
1.3.6.1.4.1.3052.10.0.1158 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1158. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1159 |
1.3.6.1.4.1.3052.10.0.1159 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1159. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1160 |
1.3.6.1.4.1.3052.10.0.1160 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1160. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1161 |
1.3.6.1.4.1.3052.10.0.1161 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1161. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1162 |
1.3.6.1.4.1.3052.10.0.1162 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1162. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1163 |
1.3.6.1.4.1.3052.10.0.1163 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1163. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1164 |
1.3.6.1.4.1.3052.10.0.1164 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1164. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1165 |
1.3.6.1.4.1.3052.10.0.1165 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1165. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1166 |
1.3.6.1.4.1.3052.10.0.1166 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1166. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1167 |
1.3.6.1.4.1.3052.10.0.1167 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1167. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1168 |
1.3.6.1.4.1.3052.10.0.1168 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1168. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1169 |
1.3.6.1.4.1.3052.10.0.1169 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1169. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1170 |
1.3.6.1.4.1.3052.10.0.1170 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1170. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1171 |
1.3.6.1.4.1.3052.10.0.1171 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1171. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1172 |
1.3.6.1.4.1.3052.10.0.1172 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1172. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1173 |
1.3.6.1.4.1.3052.10.0.1173 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1173. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1174 |
1.3.6.1.4.1.3052.10.0.1174 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1174. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1175 |
1.3.6.1.4.1.3052.10.0.1175 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1175. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1176 |
1.3.6.1.4.1.3052.10.0.1176 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1176. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1177 |
1.3.6.1.4.1.3052.10.0.1177 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1177. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1178 |
1.3.6.1.4.1.3052.10.0.1178 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1178. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1179 |
1.3.6.1.4.1.3052.10.0.1179 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1179. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1180 |
1.3.6.1.4.1.3052.10.0.1180 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1180. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1181 |
1.3.6.1.4.1.3052.10.0.1181 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1181. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1182 |
1.3.6.1.4.1.3052.10.0.1182 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1182. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1183 |
1.3.6.1.4.1.3052.10.0.1183 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1183. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1184 |
1.3.6.1.4.1.3052.10.0.1184 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1184. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1185 |
1.3.6.1.4.1.3052.10.0.1185 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1185. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1186 |
1.3.6.1.4.1.3052.10.0.1186 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1186. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1187 |
1.3.6.1.4.1.3052.10.0.1187 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1187. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1188 |
1.3.6.1.4.1.3052.10.0.1188 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1188. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1189 |
1.3.6.1.4.1.3052.10.0.1189 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1189. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1190 |
1.3.6.1.4.1.3052.10.0.1190 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1190. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1191 |
1.3.6.1.4.1.3052.10.0.1191 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1191. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1192 |
1.3.6.1.4.1.3052.10.0.1192 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1192. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1193 |
1.3.6.1.4.1.3052.10.0.1193 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1193. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1194 |
1.3.6.1.4.1.3052.10.0.1194 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1194. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1195 |
1.3.6.1.4.1.3052.10.0.1195 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1195. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1196 |
1.3.6.1.4.1.3052.10.0.1196 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1196. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1197 |
1.3.6.1.4.1.3052.10.0.1197 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1197. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1198 |
1.3.6.1.4.1.3052.10.0.1198 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1198. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
s550notificationsUserTrap1199 |
1.3.6.1.4.1.3052.10.0.1199 |
This user-defined trap is issued when an event happens that causes a
trap with specific trap type 1199. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|