Dot1agCfmMaintDomainName |
|
Denotes a generic Maintenance Domain Name.
A Dot1agCfmMaintDomainName value is always interpreted within
the context of a Dot1agCfmMaintDomainNameType value. Every
usage of the Dot1agCfmMaintDomainName textual convention is
required to specify the Dot1agCfmMaintDomainNameType object
that provides the context. It is suggested that the
Dot1agCfmMaintDomainNameType object be logically registered
before the object(s) that use the Dot1agCfmMaintDomainName
textual convention, if they appear in the same logical row.
The value of a Dot1agCfmMaintDomainName object must always
be consistent with the value of the associated
Dot1agCfmMaintDomainNameType object. Attempts to set
an Dot1agCfmMaintDomainName object to a value inconsistent
with the associated Dot1agCfmMaintDomainNameType must fail
with an inconsistentValue error.
When this textual convention is used as the syntax of an
index object, there may be issues with the limit of 128
sub-identifiers specified in SMIv2, IETF STD 58. In this
case, the object definition MUST include a 'SIZE' clause
to limit the number of potential instance sub-identifiers;
otherwise the applicable constraints MUST be stated in
the appropriate conceptual row DESCRIPTION clauses, or
in the surrounding documentation if there is no single
DESCRIPTION clause that is appropriate.
A value of none(1) in the associated
Dot1agCfmMaintDomainNameType object means that no Maintenance
Domain name is present, and the contents of the
Dot1agCfmMaintDomainName object are meaningless.
See the DESCRIPTION of the Dot1agCfmMaintAssocNameType
TEXTUAL-CONVENTION for a discussion of the length limits on
the Maintenance Domain name and Maintenance Association name.
|
TEXTUAL-CONVENTION |
|
|
|
|
OCTET STRING |
Size(1..43) |
|
Dot1agCfmMaintAssocName |
|
Denotes a generic Maintenance Association Name. It is the
part of the Maintenance Association Identifier which is
unique within the Maintenance Domain Name and is appended
to the Maintenance Domain Name to form the Maintenance
Association Identifier (MAID).
A Dot1agCfmMaintAssocName value is always interpreted within
the context of a Dot1agCfmMaintAssocNameType value. Every
usage of the Dot1agCfmMaintAssocName textual convention is
required to specify the Dot1agCfmMaintAssocNameType object
that provides the context. It is suggested that the
Dot1agCfmMaintAssocNameType object be logically registered
before the object(s) that use the Dot1agCfmMaintAssocName
textual convention, if they appear in the same logical row.
The value of a Dot1agCfmMaintAssocName object must
always be consistent with the value of the associated
Dot1agCfmMaintAssocNameType object. Attempts to set
an Dot1agCfmMaintAssocName object to a value inconsistent
with the associated Dot1agCfmMaintAssocNameType must fail
with an inconsistentValue error.
When this textual convention is used as the syntax of an
index object, there may be issues with the limit of 128
sub-identifiers specified in SMIv2, IETF STD 58. In this
case, the object definition MUST include a 'SIZE' clause
to limit the number of potential instance sub-identifiers;
otherwise the applicable constraints MUST be stated in
the appropriate conceptual row DESCRIPTION clauses, or
in the surrounding documentation if there is no single
DESCRIPTION clause that is appropriate.
|
TEXTUAL-CONVENTION |
|
|
|
|
OCTET STRING |
Size(1..45) |
|
TnEthSoamPeerCfgEntry |
|
SEQUENCE |
|
|
|
|
tnEthSoamPeerCfgMepId |
Dot1agCfmMepId |
|
|
tnEthSoamPeerCfgUnicastMac |
MacAddress |
|
|
tnEthSoamPeerCfgRowState |
RowStatus |
|
TnEthSoamPeerStatusEntry |
|
SEQUENCE |
|
|
|
|
tnEthSoamPeerStatusMepId |
Dot1agCfmMepId |
|
|
tnEthSoamPeerStatuscLOC |
TruthValue |
|
|
tnEthSoamPeerStatuscRDI |
TruthValue |
|
|
tnEthSoamPeerStatuscPeriod |
TruthValue |
|
|
tnEthSoamPeerStatuscPriority |
TruthValue |
|
TnEthSoamLossStateEntry |
|
SEQUENCE |
|
|
|
|
tnEthSoamLossStateTxCount |
Gauge32 |
|
|
tnEthSoamLossStateRxCount |
Gauge32 |
|
|
tnEthSoamLossStateNELossCount |
Gauge32 |
|
|
tnEthSoamLossStateFELossCount |
Gauge32 |
|
|
tnEthSoamLossStateNELossRatio |
Gauge32 |
|
|
tnEthSoamLossStateFELossRatio |
Gauge32 |
|
|
tnEthSoamLossStateAction |
TruthValue |
|
TnEthSoamAisCfgEntry |
|
SEQUENCE |
|
|
|
|
tnEthSoamAisCfgProtection |
TruthValue |
|
TnEthSoamDmStateEntry |
|
SEQUENCE |
|
|
|
|
tnEthSoamDmStateFNTxCount |
Gauge32 |
|
|
tnEthSoamDmStateFNRxTimeout |
Gauge32 |
|
|
tnEthSoamDmStateFNRxCount |
Gauge32 |
|
|
tnEthSoamDmStateFNRxError |
Gauge32 |
|
|
tnEthSoamDmStateFNAvgTotal |
Gauge32 |
|
|
tnEthSoamDmStateFNAvgLastN |
Gauge32 |
|
|
tnEthSoamDmStateFNAvgVarTotal |
Gauge32 |
|
|
tnEthSoamDmStateFNAvgVarLastN |
Gauge32 |
|
|
tnEthSoamDmStateFNMinValue |
Gauge32 |
|
|
tnEthSoamDmStateFNMaxValue |
Gauge32 |
|
|
tnEthSoamDmStateFNOverFlow |
Gauge32 |
|
|
tnEthSoamDmStateNFTxCount |
Gauge32 |
|
|
tnEthSoamDmStateNFRxTimeout |
Gauge32 |
|
|
tnEthSoamDmStateNFRxCount |
Gauge32 |
|
|
tnEthSoamDmStateNFRxError |
Gauge32 |
|
|
tnEthSoamDmStateNFAvgTotal |
Gauge32 |
|
|
tnEthSoamDmStateNFAvgLastN |
Gauge32 |
|
|
tnEthSoamDmStateNFAvgVarTotal |
Gauge32 |
|
|
tnEthSoamDmStateNFAvgVarLastN |
Gauge32 |
|
|
tnEthSoamDmStateNFMinValue |
Gauge32 |
|
|
tnEthSoamDmStateNFMaxValue |
Gauge32 |
|
|
tnEthSoamDmStateNFOverFlow |
Gauge32 |
|
|
tnEthSoamDmStateTwoWayTxCount |
Gauge32 |
|
|
tnEthSoamDmStateTwoWayRxTimeout |
Gauge32 |
|
|
tnEthSoamDmStateTwoWayRxCount |
Gauge32 |
|
|
tnEthSoamDmStateTwoWayRxError |
Gauge32 |
|
|
tnEthSoamDmStateTwoWayAvgTotal |
Gauge32 |
|
|
tnEthSoamDmStateTwoWayAvgLastN |
Gauge32 |
|
|
tnEthSoamDmStateTwoWayAvgVarTotal |
Gauge32 |
|
|
tnEthSoamDmStateTwoWayAvgVarLastN |
Gauge32 |
|
|
tnEthSoamDmStateTwoWayMinValue |
Gauge32 |
|
|
tnEthSoamDmStateTwoWayMaxValue |
Gauge32 |
|
|
tnEthSoamDmStateTwoWayOverFlow |
Gauge32 |
|
|
tnEthSoamDmStateAction |
TruthValue |
|
tnEthSoamMPEntry |
1.3.6.1.4.1.868.2.5.105.1.1.1.1 |
A entry in the table represents a configuration for local SOAM. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TnEthSoamMPEntry |
|
|
tnEthSoamDomaintype |
1.3.6.1.4.1.868.2.5.105.1.1.1.1.2 |
The Domain Mode affects the OAM. The allowed values are
Port: This is a MEP in the Port Domain. 'Flow Instance' is a Port.
Esp: Future use.
Evc: This is a MEP in the EVC Domain. 'Flow Instance' is a EVC.
Mpls: Future use.
Vlan: This is a MEP in the VLAN Domain. 'Flow Instance' is a VLAN.
|
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TnEthSoamType |
|
|
tnEthSoamPeerCfgEntry |
1.3.6.1.4.1.868.2.5.105.1.2.1.1 |
A entry in the table represents a configuration for peer SOAM.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TnEthSoamPeerCfgEntry |
|
|
tnEthSoamPeerStatusEntry |
1.3.6.1.4.1.868.2.5.105.1.3.1.1 |
This entry represents configuration about the SOAM that provide
OAM services.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TnEthSoamPeerStatusEntry |
|
|
tnEthSoamAPSCfgEntry |
1.3.6.1.4.1.868.2.5.105.1.4.1.1 |
This entry represents configuration about the SOAM that provide
OAM services.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TnEthSoamAPSCfgEntry |
|
|
tnEthSoamClientCfgEntry |
1.3.6.1.4.1.868.2.5.105.1.5.1.1 |
This entry represents configuration about the Client Configuration that provide
OAM services.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TnEthSoamClientCfgEntry |
|
|
tnEthSoamClientCfgDomain |
1.3.6.1.4.1.868.2.5.105.1.5.1.1.1 |
The domain of the client layer. Must be EVC.
|
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TnEthSoamType |
|
|
tnEthSoamLocalCfgEntry |
1.3.6.1.4.1.868.2.5.105.1.6.1.1 |
A entry in the table represents a configuration for local SOAM. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TnEthSoamLocalCfgEntry |
|
|
tnEthSoamDomainName |
1.3.6.1.4.1.868.2.5.105.1.6.1.1.2 |
This is either ITU ICC (MEG ID value[1-6]) or IEEE Maintenance Domain Name - depending on 'Format'. See 'Format'.
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
tnEthSoamStatusEntry |
1.3.6.1.4.1.868.2.5.105.1.7.1.1 |
This entry represents configuration about the SOAM that provide
OAM services.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TnEthSoamStatusEntry |
|
|
tnEthSoamLossStateEntry |
1.3.6.1.4.1.868.2.5.105.1.8.1.1 |
A entry in the table represents a configuration for loss measurement State.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TnEthSoamLossStateEntry |
|
|
tnEthSoamTSExtEntry |
1.3.6.1.4.1.868.2.5.105.1.9.1.1 |
A entry in the table represents a configuration for test signal.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TnEthSoamTSExtEntry |
|
|
tnEthSoamLtmEntry |
1.3.6.1.4.1.868.2.5.105.1.10.1.1 |
This entry represents configuration about the SOAM that provide
OAM services.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TnEthSoamLtmEntry |
|
|
tnEthSoamLtrEntry |
1.3.6.1.4.1.868.2.5.105.1.11.1.1 |
This entry represents configuration about the SOAM that provide
OAM services.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TnEthSoamLtrEntry |
|
|
tnEthSoamAisCfgEntry |
1.3.6.1.4.1.868.2.5.105.1.12.1.1 |
This entry represents configuration about the SOAM that provide
OAM services.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TnEthSoamAisCfgEntry |
|
|
tnEthSoamDmCfgEntry |
1.3.6.1.4.1.868.2.5.105.1.13.1.1 |
This entry represents configuration about the Delay Measurement that provide
OAM services.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TnEthSoamDmCfgEntry |
|
|
tnEthSoamDmStateEntry |
1.3.6.1.4.1.868.2.5.105.1.14.1.1 |
A entry in the table which generate a configuration for delay measurement state. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TnEthSoamDmStateEntry |
|
|