TRANGOP5830S-MU-MIB

File: TRANGOP5830S-MU-MIB.mib (33763 bytes)

Imported modules

RFC1155-SMI

RFC-1212

Imported symbols

enterprises	IpAddress	Counter
OBJECT-TYPE

Defined Types

DisplayString
OCTET STRING

Defined Values

trango		1.3.6.1.4.1.5454
OBJECT IDENTIFIER

tbw		1.3.6.1.4.1.5454.1
OBJECT IDENTIFIER

p5830smu		1.3.6.1.4.1.5454.1.22
OBJECT IDENTIFIER

musys		1.3.6.1.4.1.5454.1.22.1
OBJECT IDENTIFIER

murf		1.3.6.1.4.1.5454.1.22.2
OBJECT IDENTIFIER

ru		1.3.6.1.4.1.5454.1.22.3
OBJECT IDENTIFIER

trapconfig		1.3.6.1.4.1.5454.1.22.4
OBJECT IDENTIFIER

mibinfo		1.3.6.1.4.1.5454.1.22.5
OBJECT IDENTIFIER

muversion		1.3.6.1.4.1.5454.1.22.1.1
OBJECT IDENTIFIER

muswitches		1.3.6.1.4.1.5454.1.22.1.8
OBJECT IDENTIFIER

mutraffic		1.3.6.1.4.1.5454.1.22.1.9
OBJECT IDENTIFIER

muipconfig		1.3.6.1.4.1.5454.1.22.1.13
OBJECT IDENTIFIER

murftable		1.3.6.1.4.1.5454.1.22.2.4
OBJECT IDENTIFIER

muism		1.3.6.1.4.1.5454.1.22.2.5
OBJECT IDENTIFIER

muunii		1.3.6.1.4.1.5454.1.22.2.6
OBJECT IDENTIFIER

muversionHW		1.3.6.1.4.1.5454.1.22.1.1.1
Hardware version.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

muversionFW		1.3.6.1.4.1.5454.1.22.1.1.2
Main firmware version. Format: HD.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

muversionFPGA		1.3.6.1.4.1.5454.1.22.1.1.3
FPGA firmware version.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

muversionFWChecksum		1.3.6.1.4.1.5454.1.22.1.1.4
Master unit firmware checksum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

muversionFPGAChecksum		1.3.6.1.4.1.5454.1.22.1.1.5
Master unit FPGA checksum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

musysDeviceId		1.3.6.1.4.1.5454.1.22.1.2
Master unit device Id. Each master unit in a cluster shall have unique ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

musysDefOpMode		1.3.6.1.4.1.5454.1.22.1.3
The operation mode (on or off) the master unit is on after reboot/power cycle.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	on(16), off(0)

musysCurOpMode		1.3.6.1.4.1.5454.1.22.1.4
Master unit's current operation mode.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	on(16), off(0)

musysActivateOpmode		1.3.6.1.4.1.5454.1.22.1.5
Engage master unit to on operation mode.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	deactivated(0), activated(1)

musysReadCommStr		1.3.6.1.4.1.5454.1.22.1.6
SNMP agent read community string. It is used for authentication purpose.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

musysWriteCommStr		1.3.6.1.4.1.5454.1.22.1.7
SNMP agent write community string. It is used for authentication purpose.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

muswitchesBlockBroadcastMulticast		1.3.6.1.4.1.5454.1.22.1.8.1
This switch enables or disables the blocking of Ethernet control packet except ICMP and ARP to reduce the amount of uneccessary overhead introduced to the wireless link.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	passed(0), blocked(1)

muswitchesHTTPD		1.3.6.1.4.1.5454.1.22.1.8.5
When it is turned on, then the master unit is accessible for configuring via web browser (e.g. IE or Nescape).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

muswitchesAutoPowerLevelRemoteUnit		1.3.6.1.4.1.5454.1.22.1.8.7
When it is turned on, then the master unit will command the remote unit to do power leveling.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

mutrafficEthInOctets		1.3.6.1.4.1.5454.1.22.1.9.1
Number of payload octets received on Ethernet port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mutrafficEthOutOctets		1.3.6.1.4.1.5454.1.22.1.9.2
Number of payload octets transmitted on Ethernet port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mutrafficRfInOctets		1.3.6.1.4.1.5454.1.22.1.9.3
Number of octets of remote's payload received from RF port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mutrafficRfOutOctets		1.3.6.1.4.1.5454.1.22.1.9.4
Number of octets of remote's payload transmitted to RF port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

musysTemperature		1.3.6.1.4.1.5454.1.22.1.10
Current master unit's temperature value (in Celsius).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	-128..127

musysUpdateFlashAndActivate		1.3.6.1.4.1.5454.1.22.1.11
Save system setting values to Flash and activate the settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(0), yes(1)

musysReboot		1.3.6.1.4.1.5454.1.22.1.12
Reboot the master unit.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	deactivated(0), activated(1)

muipconfigIpAddress		1.3.6.1.4.1.5454.1.22.1.13.1
New IP address. It will be saved to non-volatile memory and activated in 5 secs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

muipconfigSubnet		1.3.6.1.4.1.5454.1.22.1.13.2
New Subnet mask. It will be saved to non-volatile memory and activated in 5 secs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

muipconfigDefaultGateway		1.3.6.1.4.1.5454.1.22.1.13.3
New Default gateway. It will be saved to non-volatile memory and activated in 5 secs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

murfRSSI		1.3.6.1.4.1.5454.1.22.2.1
Remote unit RSSI (in dBm).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	-128..127

murfActiveChannel		1.3.6.1.4.1.5454.1.22.2.2
It specifies the current channel number the master unit operates on.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..30

murfActivePolarization		1.3.6.1.4.1.5454.1.22.2.3
It specifies the current polarization the master unit operates on.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1)

murftableChannel1		1.3.6.1.4.1.5454.1.22.2.4.1
RF channel 1 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel2		1.3.6.1.4.1.5454.1.22.2.4.2
RF channel 2 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel3		1.3.6.1.4.1.5454.1.22.2.4.3
RF channel 3 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel4		1.3.6.1.4.1.5454.1.22.2.4.4
RF channel 4 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel5		1.3.6.1.4.1.5454.1.22.2.4.5
RF channel 5 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel6		1.3.6.1.4.1.5454.1.22.2.4.6
RF channel 6 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel7		1.3.6.1.4.1.5454.1.22.2.4.7
RF channel 7 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel8		1.3.6.1.4.1.5454.1.22.2.4.8
RF channel 8 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel9		1.3.6.1.4.1.5454.1.22.2.4.9
RF channel 9 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel10		1.3.6.1.4.1.5454.1.22.2.4.10
RF channel 10 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel11		1.3.6.1.4.1.5454.1.22.2.4.11
RF channel 11 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel12		1.3.6.1.4.1.5454.1.22.2.4.12
RF channel 12 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel13		1.3.6.1.4.1.5454.1.22.2.4.13
RF channel 13 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel14		1.3.6.1.4.1.5454.1.22.2.4.14
RF channel 14 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel15		1.3.6.1.4.1.5454.1.22.2.4.15
RF channel 15 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel16		1.3.6.1.4.1.5454.1.22.2.4.16
RF channel 16 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel17		1.3.6.1.4.1.5454.1.22.2.4.17
RF channel 17 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel18		1.3.6.1.4.1.5454.1.22.2.4.18
RF channel 18 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel19		1.3.6.1.4.1.5454.1.22.2.4.19
RF channel 19 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel20		1.3.6.1.4.1.5454.1.22.2.4.20
RF channel 20 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel21		1.3.6.1.4.1.5454.1.22.2.4.21
RF channel 21 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel22		1.3.6.1.4.1.5454.1.22.2.4.22
RF channel 22 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel23		1.3.6.1.4.1.5454.1.22.2.4.23
RF channel 23 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel24		1.3.6.1.4.1.5454.1.22.2.4.24
RF channel 24 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel25		1.3.6.1.4.1.5454.1.22.2.4.25
RF channel 25 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel26		1.3.6.1.4.1.5454.1.22.2.4.26
RF channel 26 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel27		1.3.6.1.4.1.5454.1.22.2.4.27
RF channel 27 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel28		1.3.6.1.4.1.5454.1.22.2.4.28
RF channel 28 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel29		1.3.6.1.4.1.5454.1.22.2.4.29
RF channel 29 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

murftableChannel30		1.3.6.1.4.1.5454.1.22.2.4.30
RF channel 30 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the master unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5260..5340 | 5736..5836

muismTxPowerMax		1.3.6.1.4.1.5454.1.22.2.5.1
The maximum ISM Tx power value can be set (in dBm).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	-128..127

muismTxPowerMin		1.3.6.1.4.1.5454.1.22.2.5.2
The minimum ISM Tx power value can be set (in dBm).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	-128..127

muismTxPower		1.3.6.1.4.1.5454.1.22.2.5.3
ISM RF tx power (in dBm). It specifies the power output of the radio, excluding the antenna gain. Check parameters muismTxPowerMax and masterismTxPowerMin for power setting range.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	-128..127

muismRxThreshold		1.3.6.1.4.1.5454.1.22.2.5.4
ISM RF rx threshold (in dBm). It specifies the receiver sensitivity of the master. By default, the radio's sensitivity is -82dBm. The higher the threshold is, the less sensitive the radio will be. In M5800S, the value -90 represents the rfrxthreshold is disabled.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	-90 | -85 | -80 | -75 | -70 | -65

muismTargetRSSI		1.3.6.1.4.1.5454.1.22.2.5.5
ISM RF RSSI (in dBm). It specifies the target RSSI from the remote unit to the master unit. Based on this parameter, the master unit can power level the remote unit so that it receives same level of signal strength from the remote unit, regardless far or near. Note that when you set the Target RSSI from the remote unit, you need to consider master unit's RF Rx Threshold value. The Target RSSI from the remote unit must be 5dB higher than the RF Rx Threshold. When the RF Rx Threshold is disabled, the setting of the Target RSSI from remote unit shall be no less than -75dBm.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	-85..-45

muuniiTxPowerMax		1.3.6.1.4.1.5454.1.22.2.6.1
This object is only applicable to M5830S/P5830S radio. The maximum UNII Tx power value can be set (in dBm).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	-128..127

muuniiTxPowerMin		1.3.6.1.4.1.5454.1.22.2.6.2
This object is only applicable to M5830S/P5830S radio. The minimum UNII Tx power value can be set (in dBm).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	-128..127

muuniiTxPower		1.3.6.1.4.1.5454.1.22.2.6.3
This object is only applicable to M5830S/P5830S radio. UNII RF tx power (in dBm). It specifies the power output of the radio, excluding the antenna gain. Check parameters apuniiTxPowerMax and apuniiTxPowerMin for power setting range.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	-128..127

muuniiRxThreshold		1.3.6.1.4.1.5454.1.22.2.6.4
This object is only applicable to M5830S/P5830S radio. UNII RF rx threshold (in dBm). It specifies the receiver sensitivity of the master.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	-90 | -85 | -80 | -75 | -70 | -65

muuniiTargetRSSI		1.3.6.1.4.1.5454.1.22.2.6.5
This object is only applicable to M5830S/P5830S radio. UNII RF target RSSI (in dBm). It specifies the target RSSI from remote unit to the master unit. Based on this parameter, the master can power level the remote unit so that it receives same level of signal strength from the remote unit, regardless far or near. Note that when you set the Target RSSI from the remote unit, you need to consider remote unit's RF Rx Threshold value. The Target RSSI from the remote unit must be 5dB higher than the RF Rx Threshold.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	-85..-45

ruDeviceId		1.3.6.1.4.1.5454.1.22.3.1
Remote unit device ID.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

ruUpstreamMIR		1.3.6.1.4.1.5454.1.22.3.2
It is the Maximum Information Rate (in Kbps) the master unit allocates to remote unit.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	100..10000

remoteDownstreamMIR		1.3.6.1.4.1.5454.1.22.3.3
It is the Maximum Information Rate (in Kbps) the master unit allocates to the remote unit.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	100..10000

ruPowerLvl		1.3.6.1.4.1.5454.1.22.3.4
It is a feature that is typically found in more elaborate mobile systems such as cellular CDMA networks. Using this feature, the remote unit have its RF power output adjusted until its signal strength received in the master unit is roughly the same.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	deactivated(0), activated(1)

ruReboot		1.3.6.1.4.1.5454.1.22.3.5
Master unit issues reboot command to remote unit.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	deactivated(0), activated(1)

ruAssociation		1.3.6.1.4.1.5454.1.22.3.6
Remote unit association status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	associated(1), notAssociated(0)

ruDistance		1.3.6.1.4.1.5454.1.22.3.7
Distance of remote unit (in mile).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..40

trapconfigDest1IPAddress		1.3.6.1.4.1.5454.1.22.4.2
Trap destination 1 IP address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

trapconfigDest2IPAddress		1.3.6.1.4.1.5454.1.22.4.3
Trap destination 2 IP address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

mibinfoVersion		1.3.6.1.4.1.5454.1.22.5.1
Trango master unit MIB Version.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor