ZYXEL-SAM1216
File:
ZYXEL-SAM1216.mib (156772 bytes)
Imported modules
Imported symbols
Defined Types
DhcpRelay82Entry |
|
SEQUENCE |
|
|
|
|
dhcpRelay82PrimaryServer |
IpAddress |
|
|
dhcpRelay82SecondaryServer |
IpAddress |
|
|
dhcpRelay82ActiveServer |
INTEGER |
|
|
dhcpRelay82Enable |
INTEGER |
|
|
dhcpRelay82Info |
DisplayString |
|
|
dhcpRelay82RelayMode |
INTEGER |
|
|
dhcpRelay82Suboption2Enable |
INTEGER |
|
|
dhcpRelay82Suboption2Info |
DisplayString |
|
|
dhcpRelay82EntryEnable |
INTEGER |
|
|
dhcpRelay82EntryOptionMode |
INTEGER |
|
MacFilterPortEntry |
|
SEQUENCE |
|
|
|
|
macFilterPortEnable |
INTEGER |
|
|
macFilterPortMacCount |
INTEGER |
|
|
macFilterPortFilterMode |
INTEGER |
|
MacFilterEntry |
|
SEQUENCE |
|
|
|
|
macFilterAddr |
PhysAddress |
|
|
macFilterRowStatus |
RowStatus |
|
OuiFilterEntry |
|
SEQUENCE |
|
|
|
|
ouiFilterAddr |
OCTET STRING |
|
|
ouiFilterRowStatus |
RowStatus |
|
OuiFilterPortEntry |
|
SEQUENCE |
|
|
|
|
ouiFilterPortEnable |
INTEGER |
|
|
ouiFilterPortFilterMode |
INTEGER |
|
DhcpSnoopPortEntry |
|
SEQUENCE |
|
|
|
|
dhcpSnoopEnable |
INTEGER |
|
DhcpStaticEntry |
|
SEQUENCE |
|
|
|
|
dhcpStaticIpAddr |
IpAddress |
|
|
dhcpStaticRowStatus |
RowStatus |
|
AclSetEntry |
|
SEQUENCE |
|
|
|
|
aclSetVpi |
INTEGER |
|
|
aclSetVci |
INTEGER |
|
|
aclSetProfileName |
DisplayString |
|
|
aclSetRowStatus |
RowStatus |
|
AclProfileEntry |
|
SEQUENCE |
|
|
|
|
aclProfileRuleName |
DisplayString |
|
|
aclProfileRuleNumber |
INTEGER |
|
|
aclProfileActionNumber |
INTEGER |
|
|
aclProfileRuleParamMask |
INTEGER |
|
|
aclProfileRuleEtype |
INTEGER |
|
|
aclProfileRuleVid |
INTEGER |
|
|
aclProfileRuleSmac |
PhysAddress |
|
|
aclProfileRuleDmac |
PhysAddress |
|
|
aclProfileRulePriority |
INTEGER |
|
|
aclProfileRuleProtocol |
INTEGER |
|
|
aclProfileRuleSrcIP |
IpAddress |
|
|
aclProfileRuleSrcIPMask |
INTEGER |
|
|
aclProfileRuleDestIP |
IpAddress |
|
|
aclProfileRuleDestIPMask |
INTEGER |
|
|
aclProfileRuleStartTos |
INTEGER |
|
|
aclProfileRuleEndTos |
INTEGER |
|
|
aclProfileRuleSrcStartPort |
INTEGER |
|
|
aclProfileRuleSrcEndPort |
INTEGER |
|
|
aclProfileRuleDestStartPort |
INTEGER |
|
|
aclProfileRuleDestEndPort |
INTEGER |
|
|
aclProfileActionRate |
INTEGER |
|
|
aclProfileActionrvlan |
INTEGER |
|
|
aclProfileActionrpri |
INTEGER |
|
|
aclProfileRowStatus |
RowStatus |
|
PppoeAgentEntry |
|
SEQUENCE |
|
|
|
|
pppoeAgentEnable |
INTEGER |
|
|
pppoeAgentInfo |
DisplayString |
|
|
pppoeAgentRowStatus |
RowStatus |
|
|
pppoeAgentOptionMode |
INTEGER |
|
AlarmConfEntry |
|
SEQUENCE |
|
|
|
|
alarmConfId |
INTEGER |
|
|
alarmConfFacility |
INTEGER |
|
|
alarmConfTarget |
INTEGER |
|
|
alarmConfSeverity |
INTEGER |
|
|
alarmConfClearable |
INTEGER |
|
AlarmCurrEntry |
|
SEQUENCE |
|
|
|
|
alarmCurrIndex |
INTEGER |
|
|
alarmCurrOccurTime |
TimeTicks |
|
|
alarmCurrTrapOid |
OBJECT IDENTIFIER |
|
|
alarmCurrParam1 |
INTEGER |
|
|
alarmCurrParam2 |
INTEGER |
|
|
alarmCurrParam3 |
INTEGER |
|
|
alarmCurrParam4 |
INTEGER |
|
|
alarmCurrParam5 |
INTEGER |
|
|
alarmCurrParam6 |
INTEGER |
|
|
alarmCurrParam7 |
INTEGER |
|
|
alarmCurrParam8 |
INTEGER |
|
|
alarmCurrTimeDescr |
DisplayString |
|
|
alarmCurrSeverity |
INTEGER |
|
|
alarmCurrDescr |
DisplayString |
|
AlarmSeverityPortEntry |
|
SEQUENCE |
|
|
|
|
severityThresh |
INTEGER |
|
McastBwEntry |
|
SEQUENCE |
|
|
|
|
mcastBwIndex |
INTEGER |
|
|
mcastBwStartIp |
IpAddress |
|
|
mcastBwEndIp |
IpAddress |
|
|
mcastBwBandwidth |
INTEGER |
|
|
mcastBwRowStatus |
RowStatus |
|
McastBwPortEntry |
|
SEQUENCE |
|
|
|
|
mcastBwPortEnable |
INTEGER |
|
|
mcastBwPortBandwidth |
INTEGER |
|
IgmpCountPortEntry |
|
SEQUENCE |
|
|
|
|
igmpCountPortEnable |
INTEGER |
|
|
igmpCountPortLimit |
INTEGER |
|
MvlanEntry |
|
SEQUENCE |
|
|
|
|
mvlanIndex |
VlanIndex |
|
|
mvlanName |
DisplayString |
|
|
mvlanEgressPorts |
PortList |
|
|
mvlanUntaggedPorts |
PortList |
|
|
mvlanRowStatus |
RowStatus |
|
MvlanTranslateEntry |
|
SEQUENCE |
|
|
|
|
mvlanTranslateIndex |
INTEGER |
|
|
mvlanTranslateStartIp |
IpAddress |
|
|
mvlanTranslateEndIp |
IpAddress |
|
QryVidConfEntry |
|
SEQUENCE |
|
|
|
|
qryVid |
INTEGER |
|
|
qryVidRowStatus |
RowStatus |
|
QryVidStatusEntry |
|
SEQUENCE |
|
|
|
|
qryVidType |
INTEGER |
|
ShdslLineConfEntry |
|
SEQUENCE |
|
|
|
|
shdslLineConfShdslMode |
INTEGER |
|
|
shdslLineConfPmms |
INTEGER |
|
|
shdslLineConfPboMode |
INTEGER |
|
|
shdslLineConfPboValue |
INTEGER |
|
|
shdslLineConfShdslTCMode |
INTEGER |
|
PvcEntry |
|
SEQUENCE |
|
|
|
|
pvcVpi |
INTEGER |
|
|
pvcVci |
INTEGER |
|
|
pvcPvid |
VlanIndex |
|
|
pvcPriority |
INTEGER |
|
|
pvcProfileDS |
DisplayString |
|
|
pvcRowStatus |
RowStatus |
|
|
pvcProfileUS |
DisplayString |
|
PvcUsRateLimitEntry |
|
SEQUENCE |
|
|
|
|
pvcUsRateLimitEnable |
INTEGER |
|
|
pvcUsRateLimit |
INTEGER |
|
PpvcEntry |
|
SEQUENCE |
|
|
|
|
ppvcVpi |
INTEGER |
|
|
ppvcVci |
INTEGER |
|
|
ppvcPvid |
VlanIndex |
|
|
ppvcEncap |
INTEGER |
|
|
ppvcPriority |
INTEGER |
|
|
ppvcRowStatus |
RowStatus |
|
PpvcMemberEntry |
|
SEQUENCE |
|
|
|
|
ppvcMemberVpi |
INTEGER |
|
|
ppvcMemberVci |
INTEGER |
|
|
ppvcMemberPriority |
INTEGER |
|
|
ppvcMemberProfileDS |
DisplayString |
|
|
ppvcMemberRowStatus |
RowStatus |
|
|
ppvcMemberProfileUS |
DisplayString |
|
PaePvcEntry |
|
SEQUENCE |
|
|
|
|
paepvcVpi |
INTEGER |
|
|
paepvcVci |
INTEGER |
|
|
paepvcPvid |
VlanIndex |
|
|
paepvcPriority |
INTEGER |
|
|
paepvcProfileDS |
DisplayString |
|
|
paepvcAcName |
DisplayString |
|
|
paepvcServiceName |
DisplayString |
|
|
paepvcHelloTime |
INTEGER |
|
|
paepvcRowStatus |
RowStatus |
|
|
paepvcProfileUS |
DisplayString |
|
TlsPvcEntry |
|
SEQUENCE |
|
|
|
|
tlspvcVpi |
INTEGER |
|
|
tlspvcVci |
INTEGER |
|
|
tlspvcSvid |
VlanIndex |
|
|
tlspvcSpriority |
INTEGER |
|
|
tlspvcProfileDS |
DisplayString |
|
|
tlspvcRowStatus |
RowStatus |
|
|
tlspvcProfileUS |
DisplayString |
|
GbondGroupEntry |
|
SEQUENCE |
|
|
|
|
gbondGroupName |
OCTET STRING |
|
|
gbondGroupPorts |
OCTET STRING |
|
|
gbondGroupSid |
INTEGER |
|
|
gbondGroupUpRate |
Unsigned32 |
|
|
gbondGroupDownRate |
Unsigned32 |
|
|
gbondGroupRowStatus |
RowStatus |
|
DscpMappingEntry |
|
SEQUENCE |
|
|
|
|
dscpSrcCodePoint |
INTEGER |
|
|
dscpMapPriority |
INTEGER |
|
DscpPortEntry |
|
SEQUENCE |
|
|
|
|
dscpStatusEnable |
INTEGER |
|
VlanIsolationEntry |
|
SEQUENCE |
|
|
|
|
vlanIsolationRowStatus |
INTEGER |
|
SecuredClientEntry |
|
SEQUENCE |
|
|
|
|
securedClientIndex |
INTEGER |
|
|
securedClientStartIp |
IpAddress |
|
|
securedClientEndIp |
IpAddress |
|
|
securedClientService |
INTEGER |
|
|
securedClientEnable |
INTEGER |
|
ExtAlarmEntry |
|
SEQUENCE |
|
|
|
|
extAlarmIndex |
INTEGER |
|
|
extAlarmname |
OCTET STRING |
|
|
extAlarmstatus |
OCTET STRING |
|
UserEntry |
|
SEQUENCE |
|
|
|
|
userName |
DisplayString |
|
|
userPassword |
DisplayString |
|
|
userPriviledge |
INTEGER |
|
|
userRowStatus |
RowStatus |
|
DhcpSnoopIpEntry |
|
SEQUENCE |
|
|
|
|
dhcpSnoopIp |
IpAddress |
|
|
dhcpSnoopMac |
PhysAddress |
|
DhcpSnoopCounterEntry |
|
SEQUENCE |
|
|
|
|
dhcpDiscovery |
Counter64 |
|
|
dhcpOffer |
Counter64 |
|
|
dhcpRequest |
Counter64 |
|
|
dhcpAck |
Counter64 |
|
|
dhcpAckBySnoopFull |
Counter64 |
|
PaepvcSessionEntry |
|
SEQUENCE |
|
|
|
|
paepvcSessionVpi |
INTEGER |
|
|
paepvcSessionVci |
INTEGER |
|
|
paepvcSessionState |
INTEGER |
|
|
paepvcSessionId |
INTEGER |
|
|
paepvcSessionUptime |
Unsigned32 |
|
|
paepvcSessionacname |
DisplayString |
|
|
paepvcSessionsrvcname |
DisplayString |
|
PaepvcCountEntry |
|
SEQUENCE |
|
|
|
|
paepvcCountVpi |
INTEGER |
|
|
paepvcCountVci |
INTEGER |
|
|
paepvcCountPppLcpCfgReqRx |
Unsigned32 |
|
|
paepvcCountPppLcpEchoReqRx |
Unsigned32 |
|
|
paepvcCountPppLcpEchoReplyRx |
Unsigned32 |
|
|
paepvcCountPadiTx |
Unsigned32 |
|
|
paepvcCountPadoRx |
Unsigned32 |
|
|
paepvcCountPadrTx |
Unsigned32 |
|
|
paepvcCountPadsRx |
Unsigned32 |
|
|
paepvcCountPadtTx |
Unsigned32 |
|
|
paepvcCountPadtRx |
Unsigned32 |
|
|
paepvcCountSrvcnameErrRx |
Unsigned32 |
|
|
paepvcCountAcSystemErrRx |
Unsigned32 |
|
|
paepvcCountGenericErrTx |
Unsigned32 |
|
|
paepvcCountGenericErrRx |
Unsigned32 |
|
MacEntry |
|
SEQUENCE |
|
|
|
|
macAddress |
MacAddress |
|
|
macPort |
INTEGER |
|
|
macStatus |
INTEGER |
|
ShdslLinePerfEntry |
|
SEQUENCE |
|
|
|
|
shdslLinePerfEs |
Counter |
|
|
shdslLinePerfSes |
Counter |
|
|
shdslLinePerfCrc |
Counter |
|
|
shdslLinePerfLosws |
Counter |
|
|
shdslLinePerfUas |
Counter |
|
|
shdslLinePerfSegmentAnomalies |
Counter |
|
|
shdslLinePerfSegmentDefect |
Counter |
|
IgmpGroupEntry |
|
SEQUENCE |
|
|
|
|
igmpGroupIp |
IpAddress |
|
|
igmpGroupvid |
INTEGER |
|
|
igmpGroupnumberOfMembers |
INTEGER |
|
|
igmpGroupMemberPorts |
PortList |
|
IgmpGroupPortEntry |
|
SEQUENCE |
|
|
|
|
igmpGroupPortIp |
IpAddress |
|
|
igmpGroupPortvid |
INTEGER |
|
IgmpGroupEntryV2 |
|
SEQUENCE |
|
|
|
|
igmpGroupVid |
VlanIndex |
|
|
igmpGroupIp |
IpAddress |
|
|
igmpGroupNumOfMembers |
INTEGER |
|
|
igmpGroupMemberPorts |
PortList |
|
IgmpGroupPortEntryV2 |
|
SEQUENCE |
|
|
|
|
igmpGroupPortVid |
VlanIndex |
|
|
igmpGroupPortIp |
IpAddress |
|
|
igmpGroupPortSourceIp |
IpAddress |
|
IgmpPortCtrlPduEntry |
|
SEQUENCE |
|
|
|
|
igmpPortCtrlPduQueryCnt |
Counter |
|
|
igmpPortCtrlPduReportCnt |
Counter |
|
|
igmpPortCtrlPduLeaveCnt |
Counter |
|
|
igmpPortNumOfActiveGroups |
INTEGER |
|
GbondStateEntry |
|
SEQUENCE |
|
|
|
|
gbondStateName |
OCTET STRING |
|
|
gbondStateSid |
INTEGER |
|
|
gbondStateUpRate |
Unsigned32 |
|
|
gbondStateDownRate |
Unsigned32 |
|
|
gbondStateMember |
OCTET STRING |
|
|
gbondStatelinkup |
OCTET STRING |
|
|
gbondStateTx |
OCTET STRING |
|
|
gbondStateRx |
OCTET STRING |
|
|
gbondStatelinkdown |
OCTET STRING |
|
RpvcGatewayEntry |
|
SEQUENCE |
|
|
|
|
rpvcGatewayIp |
IpAddress |
|
|
rpvcGatewayVlanId |
VlanIndex |
|
|
rpvcGatewayRowStatus |
RowStatus |
|
|
rpvcGatewayPriority |
INTEGER |
|
RpvcTableEntry |
|
SEQUENCE |
|
|
|
|
rpvcVpi |
INTEGER |
|
|
rpvcVci |
INTEGER |
|
|
rpvcDSProfile |
DisplayString |
|
|
rpvcUSProfile |
DisplayString |
|
|
rpvcIp |
IpAddress |
|
|
rpvcNetmask |
IpAddress |
|
|
rpvcGatewayIpAddress |
IpAddress |
|
|
rpvcRowStatus |
RowStatus |
|
RpvcRouteDomainTableEntry |
|
SEQUENCE |
|
|
|
|
rpvcRouteDomainVpi |
INTEGER |
|
|
rpvcRouteDomainVci |
INTEGER |
|
|
rpvcRouteDomainIp |
IpAddress |
|
|
rpvcRouteDomainNetmask |
IpAddress |
|
|
rpvcRouteDomainRowStatus |
RowStatus |
|
DsBcastDisableEntry |
|
SEQUENCE |
|
|
|
|
dsBcastDisableVlanId |
INTEGER |
|
|
dsBcastDisableRowStatus |
RowStatus |
|
Defined Values
zyxel |
1.1.890 |
OBJECT IDENTIFIER |
|
|
|
alarmconf |
1.1.890.1.5.5.6.2 |
OBJECT IDENTIFIER |
|
|
|
multicast |
1.1.890.1.5.5.6.7 |
OBJECT IDENTIFIER |
|
|
|
port |
1.1.890.1.5.5.6.8 |
OBJECT IDENTIFIER |
|
|
|
switch |
1.1.890.1.5.5.6.10 |
OBJECT IDENTIFIER |
|
|
|
sys |
1.1.890.1.5.5.6.11 |
OBJECT IDENTIFIER |
|
|
|
trap |
1.1.890.1.5.5.6.12 |
OBJECT IDENTIFIER |
|
|
|
clear |
1.1.890.1.5.5.6.14 |
OBJECT IDENTIFIER |
|
|
|
dhcp |
1.1.890.1.5.5.6.10.51 |
OBJECT IDENTIFIER |
|
|
|
macfilter |
1.1.890.1.5.5.6.10.53 |
OBJECT IDENTIFIER |
|
|
|
dhcpSnoop |
1.1.890.1.5.5.6.10.55 |
OBJECT IDENTIFIER |
|
|
|
acl |
1.1.890.1.5.5.6.10.56 |
OBJECT IDENTIFIER |
|
|
|
pppoeAgent |
1.1.890.1.5.5.6.10.57 |
OBJECT IDENTIFIER |
|
|
|
dhcpRelayEnable |
1.1.890.1.5.5.6.10.51.1 |
Enable/disable DHCP relay Option82 function. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
auto(1), both(2), disable(3) |
|
dhcpRelay82Table |
1.1.890.1.5.5.6.10.51.2 |
A table that contains DHCP Relay configuration. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
DhcpRelay82Entry |
|
dhcpRelay82Entry |
1.1.890.1.5.5.6.10.51.2.1 |
The entry of DHCP Relay table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
DhcpRelay82Entry |
|
|
dhcpRelay82ActiveServer |
1.1.890.1.5.5.6.10.51.2.1.3 |
The current active DHCP Relay server. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
primary(1), secondary(2) |
|
dhcpRelay82Enable |
1.1.890.1.5.5.6.10.51.2.1.4 |
Enable/disable DHCP relay and Option82 function. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
dhcpRelay82Info |
1.1.890.1.5.5.6.10.51.2.1.5 |
User specific Option82 information. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..23) |
|
dhcpRelay82RelayMode |
1.1.890.1.5.5.6.10.51.2.1.6 |
DHCP relay mode. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
auto(1), both(2) |
|
dhcpRelay82Suboption2Enable |
1.1.890.1.5.5.6.10.51.2.1.8 |
Enable/disable Option 82 sub-option 2. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
dhcpRelay82EntryEnable |
1.1.890.1.5.5.6.10.51.2.1.10 |
Enable/disable DHCP Relay |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
auto(1), both(2), disable(3) |
|
dhcpRelay82EntryOptionMode |
1.1.890.1.5.5.6.10.51.2.1.11 |
Option82 format. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
private(1), tr101(2), tr101WithVlan(3) |
|
maxNumOfDhcpRelay82Conf |
1.1.890.1.5.5.6.10.51.4 |
The maximum number of rows that can be created in dhcpRelay82Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
dhcpRelayOption82Sub1Enable |
1.1.890.1.5.5.6.10.51.5 |
Enable/disable DHCP relay Option82 subOption1 (Agent Circuit ID) function. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
dhcpRelayOption82Sub2Enable |
1.1.890.1.5.5.6.10.51.7 |
Enable/disable DHCP relay Option82 subOption2 (Agent Remote ID) function. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
macFilterPortTable |
1.1.890.1.5.5.6.10.53.1 |
This table includes the status of mac filtering for each port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
MacFilterPortEntry |
|
macFilterPortEntry |
1.1.890.1.5.5.6.10.53.1.1 |
An entry in macFilterPortTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MacFilterPortEntry |
|
|
macFilterPortEnable |
1.1.890.1.5.5.6.10.53.1.1.1 |
Enable/disable MAC filtering for the port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enableMacFilter(1), enableMacCount(2), disable(4), enableMacFilterAndMacCount(5) |
|
macFilterPortMacCount |
1.1.890.1.5.5.6.10.53.1.1.2 |
The total number of MAC addresses allowed for the port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..128 |
|
macFilterPortFilterMode |
1.1.890.1.5.5.6.10.53.1.1.3 |
The mac filter mode (accept or deny) for the port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
accept(1), deny(2) |
|
maxNumOfMacFiltersInSystem |
1.1.890.1.5.5.6.10.53.2 |
The max number of mac filters supported in the system. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
maxNumOfMacFiltersPerPort |
1.1.890.1.5.5.6.10.53.3 |
The max number of mac filters supported per port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
currNumOfMacFiltersInSystem |
1.1.890.1.5.5.6.10.53.4 |
The current number of mac filters in the system. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
macFilterTable |
1.1.890.1.5.5.6.10.53.5 |
A table that contains the mac filter addresses. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
MacFilterEntry |
|
macFilterEntry |
1.1.890.1.5.5.6.10.53.5.1 |
The entry of macFilterTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MacFilterEntry |
|
|
macFilterAddr |
1.1.890.1.5.5.6.10.53.5.1.1 |
The mac address which can pass through or be rejected from the port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PhysAddress |
|
|
macfilterTarget |
1.1.890.1.5.5.6.10.53.6.1 |
This managed object is used for identify the target on which
the port configuration should be performed. The target is encoded as:
Byte 1: 0, Reserved(chassis)
Byte 2~3: 0, Reserved(slot)
Byte 4: 0, reserved
Byte 5~11:each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
macfilterOps |
1.1.890.1.5.5.6.10.53.6.2 |
The corresponding bit is set to 1 to start the operation.
The various bit positions are:
BIT 1: enable mac filter
BIT 2: enable mac count filter
BIT 3: disable mac filter
BIT 4: set mac count
BIT 5: disable mac count filter. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
macFilterMacCountForBatchSet |
1.1.890.1.5.5.6.10.53.6.3 |
The total number of MAC addresses allowed for a port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..128 |
|
ouiFilterTable |
1.1.890.1.5.5.6.10.53.7 |
A table that contains the OUI filter addresses. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
OuiFilterEntry |
|
ouiFilterEntry |
1.1.890.1.5.5.6.10.53.7.1 |
The entry of ouiFilterTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
OuiFilterEntry |
|
|
ouiFilterAddr |
1.1.890.1.5.5.6.10.53.7.1.1 |
The first three bytes of the mac address which can pass through or be rejected from the port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
maxNumOfOuiFiltersPerPort |
1.1.890.1.5.5.6.10.53.8 |
The max number of OUI filters supported per port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ouiFilterPortTable |
1.1.890.1.5.5.6.10.53.9 |
This table includes the status of oui filtering for each port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
OuiFilterPortEntry |
|
ouiFilterPortEntry |
1.1.890.1.5.5.6.10.53.9.1 |
An entry in macFilterPortTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
OuiFilterPortEntry |
|
|
ouiFilterPortEnable |
1.1.890.1.5.5.6.10.53.9.1.1 |
Enable/disable oui filtering for the port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enableOuiFilter(1), disable(2) |
|
ouiFilterPortFilterMode |
1.1.890.1.5.5.6.10.53.9.1.2 |
The oui filter mode (accept or deny) for the port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
accept(1), deny(2) |
|
dhcpSnoopPortTable |
1.1.890.1.5.5.6.10.55.1 |
This table includes DHCP snooping enable/disable for each port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
DhcpSnoopPortEntry |
|
dhcpSnoopPortEntry |
1.1.890.1.5.5.6.10.55.1.1 |
An entry of dhcpSnoopPortTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
DhcpSnoopPortEntry |
|
|
dhcpSnoopEnable |
1.1.890.1.5.5.6.10.55.1.1.1 |
Enable/disable DHCP snooping for a port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
dhcpSnoopTarget |
1.1.890.1.5.5.6.10.55.2 |
This managed object is used for identify the target on which
the operation should be performed. The target is encoded as:
Byte 1: the octet specifies a set of eight chassis, chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5~11:each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
dhcpSnoopOps |
1.1.890.1.5.5.6.10.55.3 |
The corresponding bit is set to 1 to start the operation.
The various bit positions are:
BIT 1: DHCP snooping table flush. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
dhcpStaticTable |
1.1.890.1.5.5.6.10.55.4 |
This table defines DHCP static IP addresses. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
DhcpStaticEntry |
|
dhcpStaticEntry |
1.1.890.1.5.5.6.10.55.4.1 |
An entry of dhcpStaticTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
DhcpStaticEntry |
|
|
dhcpStaticIpAddr |
1.1.890.1.5.5.6.10.55.4.1.1 |
The IP address which can pass through the port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
maxNumOfDhcpStaticIp |
1.1.890.1.5.5.6.10.55.5 |
The maximum number of DHCP static IP addresses which can be created for a port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
dhcpSnoopLan2lanEnable |
1.1.890.1.5.5.6.10.55.6 |
Enable/disable DHCP snoop lan2lan function. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
aclSetTable |
1.1.890.1.5.5.6.10.56.1 |
aclsetTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
AclSetEntry |
|
aclSetEntry |
1.1.890.1.5.5.6.10.56.1.1 |
An entry of aclSetTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AclSetEntry |
|
|
aclSetVpi |
1.1.890.1.5.5.6.10.56.1.1.1 |
VPI value |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
aclSetVci |
1.1.890.1.5.5.6.10.56.1.1.2 |
VCI value |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
aclSetRowStatus |
1.1.890.1.5.5.6.10.56.1.1.4 |
RowStatus of aclSetEntry |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
aclProfileEntry |
1.1.890.1.5.5.6.10.56.2.1 |
An entry of aclProfileTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AclProfileEntry |
|
|
aclProfileRuleNumber |
1.1.890.1.5.5.6.10.56.2.1.2 |
The managed object is for acl profile rule configuration.
etype vlan (1),
etype smac (2),
etype dmac (3),
vlan smac (4),
vlan dmac (5),
smac dmac (6),
vlan priority (7),
etype (8),
vlan (9),
smac (10),
dmac (11),
priority (12),
protocol (13),
{srcip /{|dstip /{|tos {|srcport {|dstport }}}}} (14) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
aclProfileActionNumber |
1.1.890.1.5.5.6.10.56.2.1.3 |
Profile action number.
Bit 1: rate
Bit 2: rvlan
Bit 3: rpri
Bit 4: deny
Bit 1, Bit 2 & Bit 3 can multiple selection. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
aclProfileRuleParamMask |
1.1.890.1.5.5.6.10.56.2.1.4 |
Profile rule parameter mask.
BIT 1: srcip /
BIT 2: dstip /
BIT 3: tos
BIT 4: srcport
BIT 5: dstport
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
aclProfileRuleEtype |
1.1.890.1.5.5.6.10.56.2.1.5 |
Profile rule etype
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
aclProfileRuleVid |
1.1.890.1.5.5.6.10.56.2.1.6 |
Profile rule vid |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..4094 |
|
aclProfileRulePriority |
1.1.890.1.5.5.6.10.56.2.1.9 |
Profile rule priority |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..7 |
|
aclProfileRuleProtocol |
1.1.890.1.5.5.6.10.56.2.1.10 |
Profile rule protocol.
icmp(1),igmp(2),ip(4),tcp(6),
udp(17),gre(47),ospf(89),
other ptype |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
aclProfileRuleSrcIPMask |
1.1.890.1.5.5.6.10.56.2.1.12 |
The subnet mask of source IP mask |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..32 |
|
aclProfileRuleDestIPMask |
1.1.890.1.5.5.6.10.56.2.1.14 |
The subnet mask of dest IP mask |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..32 |
|
aclProfileRuleStartTos |
1.1.890.1.5.5.6.10.56.2.1.15 |
Profile rule start type of service |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
aclProfileRuleEndTos |
1.1.890.1.5.5.6.10.56.2.1.16 |
Profile rule end type of service |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
aclProfileRuleSrcStartPort |
1.1.890.1.5.5.6.10.56.2.1.17 |
Profile rule source start port |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
aclProfileRuleSrcEndPort |
1.1.890.1.5.5.6.10.56.2.1.18 |
Profile rule source end port |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
aclProfileRuleDestStartPort |
1.1.890.1.5.5.6.10.56.2.1.19 |
Profile rule destination start port |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
aclProfileRuleDestEndPort |
1.1.890.1.5.5.6.10.56.2.1.20 |
Profile rule destination end port |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
aclProfileActionRate |
1.1.890.1.5.5.6.10.56.2.1.21 |
Profile action to replace to this rate |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
aclProfileActionrvlan |
1.1.890.1.5.5.6.10.56.2.1.22 |
Profile action to replace to this vlan |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..4094 |
|
aclProfileActionrpri |
1.1.890.1.5.5.6.10.56.2.1.23 |
Profile action to replace to this priority |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..7 |
|
pppoeAgentTable |
1.1.890.1.5.5.6.10.57.1 |
A table that contains PPPoE DHCP Relay configuration. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
PppoeAgentEntry |
|
pppoeAgentEntry |
1.1.890.1.5.5.6.10.57.1.1 |
An entry of pppoeAgentTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
PppoeAgentEntry |
|
|
pppoeAgentEnable |
1.1.890.1.5.5.6.10.57.1.1.1 |
Enable/disable DHCP relay and Option82 function. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
pppoeAgentInfo |
1.1.890.1.5.5.6.10.57.1.1.2 |
User specific Option82 information. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..23) |
|
pppoeAgentOptionMode |
1.1.890.1.5.5.6.10.57.1.1.4 |
Option82 format. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
private(1), tr101(2), tr101WithVlan(3) |
|
maxNumOfPppoeAgentConf |
1.1.890.1.5.5.6.10.57.2 |
The maximum number of rows that can be created in pppoeAgentTable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
alarmOps |
1.1.890.1.5.5.6.2.1 |
The manager sets the corresponding bit value to 1 to start the operation
and the agent clears the object to zero when the operation is successfully completed.
The various bit positions are:
BIT 1: clear
BIT 2: cutoff |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
alarmConfTable |
1.1.890.1.5.5.6.2.2 |
This table includes alarm configuration. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
AlarmConfEntry |
|
alarmConfEntry |
1.1.890.1.5.5.6.2.2.1 |
An entry in alarmConfTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AlarmConfEntry |
|
|
alarmConfId |
1.1.890.1.5.5.6.2.2.1.1 |
5000: linkUp
5001: linkDown
5002: shdslLoopAttenCrossing
5003: shdslSNRMarginCrossing
5004: shdslPerfESThresh
5005: shdslPerfSESThresh
5006: shdslPerfCRCAnomaliesThresh
5007: shdslPerfLOSWSThresh
5008: shdslPerfUASThresh
10000: eqptVoltageError
10001: eqptTempError
10002: eqptHwRTCError
10003: eqptHWMonitorFailed
10004: coldStart
10005: warmStart
15000: sysReboot
15001: sysAlarmCutoffEnabled
15002: sysAlarmClearEnabled
15003: sysLoginFailed
15004: sysMacAntiSpoofing
20000: enetlinkUp
20001: enetlinkDown |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
alarmConfFacility |
1.1.890.1.5.5.6.2.2.1.2 |
Alarm facility. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
local1(1), local2(2), local3(3), local4(4), local5(5), local6(6), local7(7) |
|
alarmConfTarget |
1.1.890.1.5.5.6.2.2.1.3 |
The destination which alarms are reported to. Set the bit to 1 to enable the target.
BIT 1: snmp trap
BIT 2: syslog |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
alarmConfSeverity |
1.1.890.1.5.5.6.2.2.1.4 |
Alarm severity |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
critical(1), major(2), minor(3), info(4) |
|
alarmConfClearable |
1.1.890.1.5.5.6.2.2.1.5 |
Setting the object to one indicates that the alarm is to be cleared when user submits alarm clear. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
clearable(1), unclearable(2) |
|
alarmCurrTable |
1.1.890.1.5.5.6.2.3 |
This table includes current alarm information. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
AlarmCurrEntry |
|
alarmCurrEntry |
1.1.890.1.5.5.6.2.3.1 |
An entry in alarmCurrTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AlarmCurrEntry |
|
|
alarmCurrIndex |
1.1.890.1.5.5.6.2.3.1.1 |
Index of the alarm. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
alarmCurrOccurTime |
1.1.890.1.5.5.6.2.3.1.2 |
Alarm occurence time (in hundredths of a second) since the system was last re-initialized. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
alarmCurrTrapOid |
1.1.890.1.5.5.6.2.3.1.3 |
Trap OID of the alarm. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OBJECT IDENTIFIER |
|
|
alarmCurrParam1 |
1.1.890.1.5.5.6.2.3.1.4 |
The 1st parameter of the alarm. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
alarmCurrParam2 |
1.1.890.1.5.5.6.2.3.1.5 |
The 2nd parameter of the alarm. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
alarmCurrParam3 |
1.1.890.1.5.5.6.2.3.1.6 |
The 3rd parameter of the alarm. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
alarmCurrParam4 |
1.1.890.1.5.5.6.2.3.1.7 |
The 4th parameter of the alarm. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
alarmCurrParam5 |
1.1.890.1.5.5.6.2.3.1.8 |
The 5th parameter of the alarm. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
alarmCurrParam6 |
1.1.890.1.5.5.6.2.3.1.9 |
The 6th parameter of the alarm. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
alarmCurrParam7 |
1.1.890.1.5.5.6.2.3.1.10 |
The 7th parameter of the alarm. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
alarmCurrParam8 |
1.1.890.1.5.5.6.2.3.1.11 |
The 8th parameter of the alarm. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
alarmCurrTimeDescr |
1.1.890.1.5.5.6.2.3.1.12 |
The string representation of occurence time (YYYY/MM/DD HH:MM:SS). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
alarmCurrSeverity |
1.1.890.1.5.5.6.2.3.1.13 |
The severity of the alarm. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
critical(1), major(2), minor(3), info(4) |
|
alarmSeverityPortEntry |
1.1.890.1.5.5.6.2.4.1 |
An entry in alarmSeverityPortTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AlarmSeverityPortEntry |
|
|
severityThresh |
1.1.890.1.5.5.6.2.4.1.1 |
The minimum alarm severity that is reported. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
critical(1), major(2), minor(3), info(4) |
|
igmpCount |
1.1.890.1.5.5.6.7.5 |
OBJECT IDENTIFIER |
|
|
|
mvlan |
1.1.890.1.5.5.6.7.6 |
OBJECT IDENTIFIER |
|
|
|
queryVid |
1.1.890.1.5.5.6.7.7 |
OBJECT IDENTIFIER |
|
|
|
igmpEnable |
1.1.890.1.5.5.6.7.1 |
Enable/disable IGMP protocol. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enableProxy(1), enableSnooping(2), disable(3) |
|
mcastDefaultBandwidth |
1.1.890.1.5.5.6.7.4.1 |
Default bandwidth requirement for a multicast channel. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..100000 |
|
maxNumOfMcastBw |
1.1.890.1.5.5.6.7.4.2 |
The maximum number of row entries that user can create in mcastBwTable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
mcastBwTable |
1.1.890.1.5.5.6.7.4.3 |
This table defines bandwidth budget for a range of multicast IP channels. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
McastBwEntry |
|
mcastBwEntry |
1.1.890.1.5.5.6.7.4.3.1 |
An entry of mcastBwTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
McastBwEntry |
|
|
mcastBwIndex |
1.1.890.1.5.5.6.7.4.3.1.1 |
The index which specify the entry. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
mcastBwStartIp |
1.1.890.1.5.5.6.7.4.3.1.2 |
The start multicast IP of the bandwidth control range. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
mcastBwEndIp |
1.1.890.1.5.5.6.7.4.3.1.3 |
The end multicast IP of the bandwidth control range. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
mcastBwBandwidth |
1.1.890.1.5.5.6.7.4.3.1.4 |
The bandwidth budget for the multicast IP channels. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
mcastBwRowStatus |
1.1.890.1.5.5.6.7.4.3.1.5 |
The row status of the entry. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
mcastBwPortTable |
1.1.890.1.5.5.6.7.4.4 |
This table specify the multicast bandwidth control of the port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
McastBwPortEntry |
|
mcastBwPortEntry |
1.1.890.1.5.5.6.7.4.4.1 |
An entry of mcastBwPortTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
McastBwPortEntry |
|
|
mcastBwPortEnable |
1.1.890.1.5.5.6.7.4.4.1.1 |
Enable/disable multicast bandwidth control for a port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
mcastBwPortBandwidth |
1.1.890.1.5.5.6.7.4.4.1.2 |
Set bandwidth threshold for a port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
igmpCountPortEntry |
1.1.890.1.5.5.6.7.5.1.1 |
An entry of igmpCountPortTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IgmpCountPortEntry |
|
|
igmpCountPortEnable |
1.1.890.1.5.5.6.7.5.1.1.1 |
Enable/disable IGMP count limiting for a port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
igmpCountPortLimit |
1.1.890.1.5.5.6.7.5.1.1.2 |
The maximum allowed IGMP report count for a port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
maxNumOfMvlan |
1.1.890.1.5.5.6.7.6.1 |
The maximum number of row entries that user can create in mvlanTable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
mvlanTable |
1.1.890.1.5.5.6.7.6.2 |
A table containing static configuration information for
each multicast VLAN configured into the device. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
MvlanEntry |
|
mvlanEntry |
1.1.890.1.5.5.6.7.6.2.1 |
An entry of mvlanTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MvlanEntry |
|
|
mvlanIndex |
1.1.890.1.5.5.6.7.6.2.1.1 |
The VLAN-ID refering to this VLAN. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
VlanIndex |
|
|
mvlanName |
1.1.890.1.5.5.6.7.6.2.1.2 |
An administratively assigned string, which may be used to identify the VLAN. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..31) |
|
mvlanEgressPorts |
1.1.890.1.5.5.6.7.6.2.1.3 |
The set of ports which are permanently assigned to the
egress list for this multicast VLAN. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
PortList |
|
|
mvlanUntaggedPorts |
1.1.890.1.5.5.6.7.6.2.1.4 |
The set of ports which should transmit egress packets
for this multicast VLAN as untagged. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
PortList |
|
|
mvlanRowStatus |
1.1.890.1.5.5.6.7.6.2.1.5 |
This object indicates the status of this entry. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
mvlanTranslateEntry |
1.1.890.1.5.5.6.7.6.3.1 |
An entry of mvlanTranslateTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MvlanTranslateEntry |
|
|
mvlanTranslateIndex |
1.1.890.1.5.5.6.7.6.3.1.1 |
The index which specif the entry. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
mvlanTranslateStartIp |
1.1.890.1.5.5.6.7.6.3.1.2 |
The start IP of the multicast VLAN translation. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
mvlanTranslateEndIp |
1.1.890.1.5.5.6.7.6.3.1.3 |
The end IP of the multicast VLAN translation. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
maxNumOfQryVid |
1.1.890.1.5.5.6.7.7.1 |
The maximum number of row entries that user can create in qryVidConfTable.
This object is supported by R1.02 and later versions. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
qryVidConfTable |
1.1.890.1.5.5.6.7.7.2 |
This table defines statically set VLANs used for response IGMP report.
This table is supported by R1.02 and later versions. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
QryVidConfEntry |
|
qryVidConfEntry |
1.1.890.1.5.5.6.7.7.2.1 |
An entry in qryVidConfTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
QryVidConfEntry |
|
|
qryVid |
1.1.890.1.5.5.6.7.7.2.1.1 |
VLAN ID. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
qryVidRowStatus |
1.1.890.1.5.5.6.7.7.2.1.2 |
This object indicates the status of this entry. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
qryVidStatusTable |
1.1.890.1.5.5.6.7.7.3 |
This table shows statically set or dynamically learned VLANs used for response IGMP report. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
QryVidStatusEntry |
|
qryVidStatusEntry |
1.1.890.1.5.5.6.7.7.3.1 |
An entry in qryVidStatusTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
QryVidStatusEntry |
|
|
qryVidType |
1.1.890.1.5.5.6.7.7.3.1.1 |
VLAN type. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
static(1), dynamic(2) |
|
igmpVersion |
1.1.890.1.5.5.6.7.7 |
Setting IGMP version. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
v2(1), v3(2) |
|
shdslPort |
1.1.890.1.5.5.6.8.3 |
OBJECT IDENTIFIER |
|
|
|
pvc |
1.1.890.1.5.5.6.8.4 |
OBJECT IDENTIFIER |
|
|
|
ppvc |
1.1.890.1.5.5.6.8.5 |
OBJECT IDENTIFIER |
|
|
|
rpvc |
1.1.890.1.5.5.6.8.8 |
OBJECT IDENTIFIER |
|
|
|
paepvc |
1.1.890.1.5.5.6.8.10 |
OBJECT IDENTIFIER |
|
|
|
tlspvc |
1.1.890.1.5.5.6.8.11 |
OBJECT IDENTIFIER |
|
|
|
gbond |
1.1.890.1.5.5.6.8.51 |
OBJECT IDENTIFIER |
|
|
|
subrPortTable |
1.1.890.1.5.5.6.8.1 |
This table includes subscriber attributes for the port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SubrPortEntry |
|
subrPortEntry |
1.1.890.1.5.5.6.8.1.1 |
An entry in subrPortTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SubrPortEntry |
|
|
subrPortName |
1.1.890.1.5.5.6.8.1.1.1 |
Name of the subscriber. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..31) |
|
subrPortTel |
1.1.890.1.5.5.6.8.1.1.2 |
Telephone number of the subscriber. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..15) |
|
shdslLineConfTable |
1.1.890.1.5.5.6.8.3.1 |
This table includes common attributes describing the SHDSL line. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ShdslLineConfEntry |
|
shdslLineConfEntry |
1.1.890.1.5.5.6.8.3.1.1 |
An entry in shdslLineConfTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ShdslLineConfEntry |
|
|
shdslLineConfShdslMode |
1.1.890.1.5.5.6.8.3.1.1.1 |
Mode of the SHDSL port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
stuc(1), stur(2), auto(3), pam16(4), pam32(5) |
|
shdslLineConfPmms |
1.1.890.1.5.5.6.8.3.1.1.2 |
Negotiated noise margin mode of the SHDSL port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
normal(1), forced(2) |
|
shdslLineConfPboMode |
1.1.890.1.5.5.6.8.3.1.1.3 |
Power backoff mode of the SHDSL port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
normalepl(1), forcedepl(2), forcednoepl(3) |
|
shdslLineConfPboValue |
1.1.890.1.5.5.6.8.3.1.1.4 |
Power backoff value of the SHDSL port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..31 |
|
shdslLineConfShdslTCMode |
1.1.890.1.5.5.6.8.3.1.1.5 |
Transmission Convergence Mode of the SHDSL port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
atm(1), efm(2) |
|
shdslPortTarget |
1.1.890.1.5.5.6.8.3.2.1 |
The managed object is used for identify the target on which
the port configuration should be performed. The target is encoded as:
Byte 1: the octet specifies a set of eight chassis, chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5~11:each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
shdslPortOps |
1.1.890.1.5.5.6.8.3.2.2 |
The managed object is for SHDSL line configuration. When the EMS
wants to issue the desired operation, the EMS shall send SNMP-SET message to set
the corresponding bit value to be 1. The various bit positions are:
BIT 1: enable port
BIT 2: disable port
BIT 3: set SHDSL mode
BIT 4: set line profile
BIT 5: set alarm profile
BIT 6: set pmms mode to be normal
BIT 7: set pmms mode to be forced
BIT 8: set pbo mode to be normalepl
BIT 9: set pbo mode to be forcedepl
BIT 10: set pbo mode to be forcednoepl
BIT 11: set pbo value |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
shdslModeForBatchSet |
1.1.890.1.5.5.6.8.3.2.3 |
Mode of the SHDSL port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
stuc(1), stur(2) |
|
shdslPboValueForBatchSet |
1.1.890.1.5.5.6.8.3.2.6 |
Power backoff value of the SHDSL port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..31 |
|
maxNumOfPvcs |
1.1.890.1.5.5.6.8.4.1 |
The maximum number of PVCs which could be created on a port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
pvcTable |
1.1.890.1.5.5.6.8.4.2 |
This table includes PVC configuration. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
PvcEntry |
|
pvcEntry |
1.1.890.1.5.5.6.8.4.2.1 |
An entry in pvcTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
PvcEntry |
|
|
pvcVpi |
1.1.890.1.5.5.6.8.4.2.1.1 |
VPI of the pvc. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
pvcVci |
1.1.890.1.5.5.6.8.4.2.1.2 |
VCI of the pvc. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
pvcPvid |
1.1.890.1.5.5.6.8.4.2.1.3 |
Default VID of the pvc. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
VlanIndex |
|
|
pvcPriority |
1.1.890.1.5.5.6.8.4.2.1.5 |
802.1p default priority of the pvc. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..7 |
|
pvcProfileDS |
1.1.890.1.5.5.6.8.4.2.1.6 |
The value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..31) |
|
pvcRowStatus |
1.1.890.1.5.5.6.8.4.2.1.7 |
This object is used to create a new row or delete an existing row in this table. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
pvcProfileUS |
1.1.890.1.5.5.6.8.4.2.1.8 |
The value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..31) |
|
pvcUsRateLimitEntry |
1.1.890.1.5.5.6.8.4.4.1 |
An entry in pvcUsRateLimitTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
PvcUsRateLimitEntry |
|
|
pvcUsRateLimitEnable |
1.1.890.1.5.5.6.8.4.4.1.1 |
Enable/disable upstream rate limit for a PVC. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
pvcUsRateLimit |
1.1.890.1.5.5.6.8.4.4.1.2 |
Upstream rate limit in Kbps for a PVC. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
maxNumOfPriorityPvcs |
1.1.890.1.5.5.6.8.5.1 |
The maximum number of priority PVCs which could be created on a port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ppvcTable |
1.1.890.1.5.5.6.8.5.2 |
This table includes priority PVC configuration. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
PpvcEntry |
|
ppvcEntry |
1.1.890.1.5.5.6.8.5.2.1 |
An entry in ppvcTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
PpvcEntry |
|
|
ppvcVpi |
1.1.890.1.5.5.6.8.5.2.1.1 |
VPI of the ppvc. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
ppvcVci |
1.1.890.1.5.5.6.8.5.2.1.2 |
VCI of the ppvc. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
ppvcPvid |
1.1.890.1.5.5.6.8.5.2.1.3 |
Default VID of the ppvc. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
VlanIndex |
|
|
ppvcEncap |
1.1.890.1.5.5.6.8.5.2.1.4 |
Encapsulation of the ppvc. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
llc(1), vc(2) |
|
ppvcPriority |
1.1.890.1.5.5.6.8.5.2.1.5 |
802.1p default priority of the ppvc. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..7 |
|
ppvcRowStatus |
1.1.890.1.5.5.6.8.5.2.1.6 |
This object is used to create a new row or delete an existing row in this table. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
ppvcMemberTable |
1.1.890.1.5.5.6.8.5.4 |
This table includes priority PVC member configuration. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
PpvcMemberEntry |
|
ppvcMemberEntry |
1.1.890.1.5.5.6.8.5.4.1 |
An entry in ppvcMemberTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
PpvcMemberEntry |
|
|
ppvcMemberVpi |
1.1.890.1.5.5.6.8.5.4.1.1 |
VPI of the member ppvc. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
ppvcMemberVci |
1.1.890.1.5.5.6.8.5.4.1.2 |
VCI of the member ppvc. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
ppvcMemberPriority |
1.1.890.1.5.5.6.8.5.4.1.3 |
802.1p default priority of the member ppvc. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..7 |
|
ppvcMemberProfileDS |
1.1.890.1.5.5.6.8.5.4.1.4 |
The profile of the member ppvc in DS side. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..31) |
|
ppvcMemberRowStatus |
1.1.890.1.5.5.6.8.5.4.1.5 |
This object is used to create a new row or delete an existing row in this table. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
ppvcMemberProfileUS |
1.1.890.1.5.5.6.8.5.4.1.6 |
The profile of the member ppvc in US side. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..31) |
|
portTarget |
1.1.890.1.5.5.6.8.6.1 |
The managed object is used for identify the target on which
the port configuration should be performed. The target is encoded as:
Byte 1: the octet specifies a set of eight chassis, chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5~11:each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
portOps |
1.1.890.1.5.5.6.8.6.2 |
The managed object is for xDSL line configuration. When the EMS
wants to issue the desired operation, the EMS shall send SNMP-SET message to set
the corresponding bit value to be 1. The various bit positions are:
BIT 1: enable port
BIT 2: disable port |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
paepvcTable |
1.1.890.1.5.5.6.8.10.1 |
This table includes PPPoAoE PVC configuration. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
PaePvcEntry |
|
paepvcEntry |
1.1.890.1.5.5.6.8.10.1.1 |
An entry of paepvcTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
PaePvcEntry |
|
|
paepvcVpi |
1.1.890.1.5.5.6.8.10.1.1.1 |
VPI of the pvc. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
paepvcVci |
1.1.890.1.5.5.6.8.10.1.1.2 |
VCI of the pvc. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
paepvcPvid |
1.1.890.1.5.5.6.8.10.1.1.3 |
Default VID of the pvc. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
VlanIndex |
|
|
paepvcPriority |
1.1.890.1.5.5.6.8.10.1.1.5 |
802.1p default priority of the pvc. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..7 |
|
paepvcProfileDS |
1.1.890.1.5.5.6.8.10.1.1.6 |
The value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..31) |
|
paepvcAcName |
1.1.890.1.5.5.6.8.10.1.1.7 |
Access concentrator name. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
paepvcHelloTime |
1.1.890.1.5.5.6.8.10.1.1.9 |
The system will close the PVC if there are not any LCP echo messages passed through
during the LCP hello time. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
paepvcRowStatus |
1.1.890.1.5.5.6.8.10.1.1.10 |
This object is used to create a new row or delete an existing row in this table. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
paepvcProfileUS |
1.1.890.1.5.5.6.8.10.1.1.11 |
The value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..31) |
|
tlspvcTable |
1.1.890.1.5.5.6.8.11.1 |
This table includes Transparent LAN Service (TLS) PVC configuration. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
TlsPvcEntry |
|
tlspvcEntry |
1.1.890.1.5.5.6.8.11.1.1 |
An entry of tlspvcTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TlsPvcEntry |
|
|
tlspvcVpi |
1.1.890.1.5.5.6.8.11.1.1.1 |
VPI of the pvc. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
tlspvcVci |
1.1.890.1.5.5.6.8.11.1.1.2 |
VCI of the pvc. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
tlspvcSvid |
1.1.890.1.5.5.6.8.11.1.1.3 |
s-tag VLAN ID of the pvc. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
VlanIndex |
|
|
tlspvcSpriority |
1.1.890.1.5.5.6.8.11.1.1.5 |
s-tag priority of the pvc. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..7 |
|
tlspvcProfileDS |
1.1.890.1.5.5.6.8.11.1.1.6 |
The value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..31) |
|
tlspvcRowStatus |
1.1.890.1.5.5.6.8.11.1.1.7 |
This object is used to create a new row or delete an existing row in this table. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
tlspvcProfileUS |
1.1.890.1.5.5.6.8.11.1.1.8 |
The value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..31) |
|
gbondGroupTable |
1.1.890.1.5.5.6.8.51.1 |
A table containing the G.Bond configuration information for
each bonding group of the device. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
GbondGroupEntry |
|
gbondGroupEntry |
1.1.890.1.5.5.6.8.51.1.1 |
An entry of gbondTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
GbondGroupEntry |
|
|
gbondGroupName |
1.1.890.1.5.5.6.8.51.1.1.1 |
An administratively assigned string, which may be used to identify bonding group. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..31) |
|
gbondGroupPorts |
1.1.890.1.5.5.6.8.51.1.1.2 |
The set of ports which are currently assigned to the
bonding group of specified group name.
Byte 1: Reserved(chassis)
Byte 2~3: Reserved(slot)
Byte 4: Reserved
Byte 5: Each bit in the octet specifies a port from MSB to LSB.
for example: 32(hex) = 50(dec) = 00110010(bin) means the
port 3, 4 and 7.
Byte 6~10:Reserved |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
gbondGroupSid |
1.1.890.1.5.5.6.8.51.1.1.3 |
This object indicates the sequence index mode of the bonding group. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
sid8(1), sid12(2) |
|
gbondGroupRowStatus |
1.1.890.1.5.5.6.8.51.1.1.6 |
This object indicates the status of this entry. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
dscp |
1.1.890.1.5.5.6.10.10 |
OBJECT IDENTIFIER |
|
|
|
enetMtu |
1.1.890.1.5.5.6.10.13 |
OBJECT IDENTIFIER |
|
|
|
dscpMappingTable |
1.1.890.1.5.5.6.10.10.1 |
The table contains DSCP mapping configuration for the adsl and ethernet ports. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
DscpMappingEntry |
|
dscpMappingEntry |
1.1.890.1.5.5.6.10.10.1.1 |
An entry of dscpMappingTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
DscpMappingEntry |
|
|
dscpSrcCodePoint |
1.1.890.1.5.5.6.10.10.1.1.1 |
The DSCP source code point used for mapping. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
dscpMapPriority |
1.1.890.1.5.5.6.10.10.1.1.3 |
The mapping p bits that will replace the source p bits in the incoming packet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..7 |
|
dscpPortTable |
1.1.890.1.5.5.6.10.10.2 |
The table contains DSCP mapping configuration for the adsl and ethernet ports. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
DscpPortEntry |
|
dscpPortEntry |
1.1.890.1.5.5.6.10.10.2.1 |
An entry of dscpPortTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
DscpPortEntry |
|
|
dscpStatusEnable |
1.1.890.1.5.5.6.10.10.2.1.1 |
The DSCP port status. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
vlanIsolationEntry |
1.1.890.1.5.5.6.10.12.1.1 |
An entry of vlanIsolationTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VlanIsolationEntry |
|
|
vlanIsolationRowStatus |
1.1.890.1.5.5.6.10.12.1.1.1 |
Row status of the table used to create/delete an entry. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
enetMaxMtu |
1.1.890.1.5.5.6.10.13.1 |
Sets the maximum MTU size for layer 2 frame, size from 1526 to 1600, default value is 1526. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
extAlarm |
1.1.890.1.5.5.6.11.8 |
OBJECT IDENTIFIER |
|
|
|
user |
1.1.890.1.5.5.6.11.9 |
OBJECT IDENTIFIER |
|
|
|
sysSlotId |
1.1.890.1.5.5.6.11.10 |
Device slot ID(0...255). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
securedClientTable |
1.1.890.1.5.5.6.11.5.2 |
A table that contains information about secured clients. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SecuredClientEntry |
|
securedClientEntry |
1.1.890.1.5.5.6.11.5.2.1 |
A list of secured client entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SecuredClientEntry |
|
|
securedClientIndex |
1.1.890.1.5.5.6.11.5.2.1.1 |
The index of the entry. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
securedClientStartIp |
1.1.890.1.5.5.6.11.5.2.1.2 |
The starting IP address of the secured client set. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
securedClientEndIp |
1.1.890.1.5.5.6.11.5.2.1.3 |
The ending IP address of the secured client set. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
securedClientService |
1.1.890.1.5.5.6.11.5.2.1.4 |
Each bit corresponds to a service. The bit is set to 1 if the
service is enabled, and set to 0 if the service is disabled.
The various bit positions are:
BIT 1: telnet
BIT 2: ftp
BIT 3: web
BIT 4: icmp
BIT 5: ssh
BIT 6: snmp. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
securedClientEnable |
1.1.890.1.5.5.6.11.5.2.1.5 |
Enable/disable the entry. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
extAlarmTable |
1.1.890.1.5.5.6.11.8.1 |
A table that contains external alarm information. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ExtAlarmEntry |
|
extAlarmEntry |
1.1.890.1.5.5.6.11.8.1.1 |
The entry of external alarm table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ExtAlarmEntry |
|
|
extAlarmIndex |
1.1.890.1.5.5.6.11.8.1.1.1 |
The index of the entry. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
extAlarmname |
1.1.890.1.5.5.6.11.8.1.1.2 |
The external alarm name. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..31) |
|
extAlarmstatus |
1.1.890.1.5.5.6.11.8.1.1.3 |
Dispaly 'Normal' or 'Alarm' string |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..31) |
|
userAuthMode |
1.1.890.1.5.5.6.11.9.1 |
User authentication procsssing mode. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
local(1), radius(2), localThenRadius(3) |
|
userAuthServerIp |
1.1.890.1.5.5.6.11.9.2 |
The IP address of the authentication server. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
userAuthServerPort |
1.1.890.1.5.5.6.11.9.3 |
The port of the authentication server. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
userAuthServerSecret |
1.1.890.1.5.5.6.11.9.4 |
The secret between the authentication server and the NE for authentication process. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
userTable |
1.1.890.1.5.5.6.11.9.5 |
A table that contains user information. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
UserEntry |
|
userEntry |
1.1.890.1.5.5.6.11.9.5.1 |
An entry of userTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
UserEntry |
|
|
userName |
1.1.890.1.5.5.6.11.9.5.1.1 |
The user name. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
userPriviledge |
1.1.890.1.5.5.6.11.9.5.1.3 |
The user priviledge to decide what operation the user can and cannot do. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
high(1), middle(2), low(3) |
|
userRowStatus |
1.1.890.1.5.5.6.11.9.5.1.4 |
The row status used to create or delete a user. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
userAuthDefaultPriviledge |
1.1.890.1.5.5.6.11.9.6 |
The user default priviledge to be assigned when radius authentication succeds
but no user priviledge information(radius service-type) is provided. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
high(1), middle(2), low(3), deny(4) |
|
stdioTimeout |
1.1.890.1.5.5.6.11.12 |
Set the stdio timeout, 0~360 minutes. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..360 |
|
dhcpStats |
1.1.890.1.5.5.6.13.11 |
OBJECT IDENTIFIER |
|
|
|
macStats |
1.1.890.1.5.5.6.13.13 |
OBJECT IDENTIFIER |
|
|
|
shdslStats |
1.1.890.1.5.5.6.13.14 |
OBJECT IDENTIFIER |
|
|
|
gbondStats |
1.1.890.1.5.5.6.13.51 |
OBJECT IDENTIFIER |
|
|
|
dhcpSnoopIpTable |
1.1.890.1.5.5.6.13.11.1 |
This table shows the IP addresses and netmasks offered by the DHCP server. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
DhcpSnoopIpEntry |
|
dhcpSnoopIpEntry |
1.1.890.1.5.5.6.13.11.1.1 |
An entry of dhcpSnoopIpTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
DhcpSnoopIpEntry |
|
|
dhcpSnoopIp |
1.1.890.1.5.5.6.13.11.1.1.1 |
The snooped IP address. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
dhcpSnoopMac |
1.1.890.1.5.5.6.13.11.1.1.2 |
The snooped MAC address. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PhysAddress |
|
|
dhcpSnoopCounterEntry |
1.1.890.1.5.5.6.13.11.2.1 |
An entry of dhcpSnoopCounterTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
DhcpSnoopCounterEntry |
|
|
dhcpDiscovery |
1.1.890.1.5.5.6.13.11.2.1.1 |
The total number of received DHCP server discovery packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
dhcpOffer |
1.1.890.1.5.5.6.13.11.2.1.2 |
The total number of received DHCP server offer packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
dhcpRequest |
1.1.890.1.5.5.6.13.11.2.1.3 |
The total number of received DHCP IP request packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
dhcpAck |
1.1.890.1.5.5.6.13.11.2.1.4 |
The total number of received DHCP IP acknowledge packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
dhcpAckBySnoopFull |
1.1.890.1.5.5.6.13.11.2.1.5 |
The total number of received DHCP IP acknowledge packets that replace the oldest snooping
entry in snooping table due to table full. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
paepvcSessionEntry |
1.1.890.1.5.5.6.13.12.1.1 |
An entry of paepvcSessionTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
PaepvcSessionEntry |
|
|
paepvcSessionVpi |
1.1.890.1.5.5.6.13.12.1.1.1 |
The PAEPVC VPI. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
paepvcSessionVci |
1.1.890.1.5.5.6.13.12.1.1.2 |
The PAEPVC VCI. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
paepvcSessionState |
1.1.890.1.5.5.6.13.12.1.1.3 |
The PAEPVC status. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
down(1), pppoe(2), ppp(3), up(4) |
|
paepvcSessionId |
1.1.890.1.5.5.6.13.12.1.1.4 |
The PAEPVC session ID. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
paepvcCountEntry |
1.1.890.1.5.5.6.13.12.2.1 |
An entry of paepvcCountTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
PaepvcCountEntry |
|
|
paepvcCountVpi |
1.1.890.1.5.5.6.13.12.2.1.1 |
The PAEPVC VPI. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
paepvcCountVci |
1.1.890.1.5.5.6.13.12.2.1.2 |
The PAEPVC VCI. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
paepvcCountPadiTx |
1.1.890.1.5.5.6.13.12.2.1.6 |
The number of pppoe padi transfered |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
paepvcCountPadoRx |
1.1.890.1.5.5.6.13.12.2.1.7 |
The number of pppoe pado received |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
paepvcCountPadrTx |
1.1.890.1.5.5.6.13.12.2.1.8 |
The number of pppoe padr transfered |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
paepvcCountPadsRx |
1.1.890.1.5.5.6.13.12.2.1.9 |
The number of pppoe pads received |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
paepvcCountPadtTx |
1.1.890.1.5.5.6.13.12.2.1.10 |
The number of pppoe padt transfered |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
paepvcCountPadtRx |
1.1.890.1.5.5.6.13.12.2.1.11 |
The number of pppoe padt received |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
paepvcCountAcSystemErrRx |
1.1.890.1.5.5.6.13.12.2.1.13 |
The number of pppoe access concentrator name error received |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
macDisplayTarget |
1.1.890.1.5.5.6.13.13.1 |
This managed object is a filter used for identify the target from which
the MAC addresses are learned in macTable. The target could be:
99: all ports in the system
98: all subscriber ports
97: all Ethernet ports
IfIndex is used for identifying subscriber ports and Ethernet Ports(e.g. 1 ~ 50). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
macTable |
1.1.890.1.5.5.6.13.13.2 |
A table that contains information about unicast
entries for which the bridge has forwarding and/or
filtering information. This information is used
by the transparent bridging function in
determining how to propagate a received frame. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
MacEntry |
|
macEntry |
1.1.890.1.5.5.6.13.13.2.1 |
An entry of macTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MacEntry |
|
|
macAddress |
1.1.890.1.5.5.6.13.13.2.1.1 |
A unicast MAC address for which the bridge has
forwarding and/or filtering information. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
macPort |
1.1.890.1.5.5.6.13.13.2.1.2 |
The port from which the mac address has been learned. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
macStatus |
1.1.890.1.5.5.6.13.13.2.1.3 |
The status of this entry. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), invalid(2), learned(3), self(4), mgmt(5) |
|
shdslLinePerfEntry |
1.1.890.1.5.5.6.13.14.1.1 |
An entry of shdslLinePerfTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ShdslLinePerfEntry |
|
|
shdslLinePerfEs |
1.1.890.1.5.5.6.13.14.1.1.1 |
Count of Errored Seconds (ES) on this endpoint since link up. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
shdslLinePerfSes |
1.1.890.1.5.5.6.13.14.1.1.2 |
Count of Severely Errored Seconds (SES) on this endpoint since link up. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
shdslLinePerfCrc |
1.1.890.1.5.5.6.13.14.1.1.3 |
Count of CRC anomalies on this endpoint since link up. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
shdslLinePerfLosws |
1.1.890.1.5.5.6.13.14.1.1.4 |
Count of Loss of Sync Word (LOSW) Seconds on this endpoint since link up. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
shdslLinePerfUas |
1.1.890.1.5.5.6.13.14.1.1.5 |
Count of Unavailable Seconds (UAS) on this endpoint since link up. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
shdslLinePerfSegmentDefect |
1.1.890.1.5.5.6.13.14.1.1.7 |
Count of Segment Defects on this endpoint since link up. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
igmpQueryCntTotal |
1.1.890.1.5.5.6.13.1 |
The total number of IGMP query messages received. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
igmpReportCntTotal |
1.1.890.1.5.5.6.13.2 |
The total number of IGMP report messages received. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
igmpLeaveCntTotal |
1.1.890.1.5.5.6.13.3 |
The total number of IGMP leave messages received. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
igmpNumOfActiveGroups |
1.1.890.1.5.5.6.13.4 |
The total number of IGMP learned groups. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
igmpGroupTable |
1.1.890.1.5.5.6.13.5 |
This table includes igmp group information. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
IgmpGroupEntry |
|
igmpGroupEntry |
1.1.890.1.5.5.6.13.5.1 |
An entry in igmpGroupTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IgmpGroupEntry |
|
|
igmpGroupIp |
1.1.890.1.5.5.6.13.5.1.1 |
igmp group IP |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
igmpGroupvid |
1.1.890.1.5.5.6.13.5.1.2 |
vlan id |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
igmpGroupnumberOfMembers |
1.1.890.1.5.5.6.13.5.1.3 |
number Of Members |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
igmpGroupPortEntry |
1.1.890.1.5.5.6.13.6.1 |
An entry in igmpGroupPortTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IgmpGroupPortEntry |
|
|
igmpGroupPortvid |
1.1.890.1.5.5.6.13.6.1.2 |
Igmp Group vid |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
igmpGroupTableV2 |
1.1.890.1.5.5.6.13.7 |
A table that displays IGMP learned group member information. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
IgmpGroupEntryV2 |
|
igmpGroupEntryV2 |
1.1.890.1.5.5.6.13.7.1 |
An entry of igmpGroupTableV2. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IgmpGroupEntryV2 |
|
|
igmpGroupVid |
1.1.890.1.5.5.6.13.7.1.1 |
The IGMP group VLAN ID. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
VlanIndex |
|
|
igmpGroupIp |
1.1.890.1.5.5.6.13.7.1.2 |
The multicast IP address. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
igmpGroupNumOfMembers |
1.1.890.1.5.5.6.13.7.1.3 |
The number of member ports in the group. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
igmpGroupPortEntryV2 |
1.1.890.1.5.5.6.13.8.1 |
An entry of igmpGroupPortTableV2. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IgmpGroupPortEntryV2 |
|
|
igmpGroupPortIp |
1.1.890.1.5.5.6.13.8.1.2 |
The multicast IP address. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
igmpGroupPortSourceIp |
1.1.890.1.5.5.6.13.8.1.3 |
The source IP address that joins the IGMP group. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
igmpPortCtrlPduEntry |
1.1.890.1.5.5.6.13.9.1 |
An entry of igmpPortCtrlPduTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IgmpPortCtrlPduEntry |
|
|
igmpPortCtrlPduQueryCnt |
1.1.890.1.5.5.6.13.9.1.1 |
The total number of IGMP query messages received in this port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
igmpPortCtrlPduReportCnt |
1.1.890.1.5.5.6.13.9.1.2 |
The total number of IGMP report messages received in this port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
igmpPortCtrlPduLeaveCnt |
1.1.890.1.5.5.6.13.9.1.3 |
The total number of IGMP leave messages received in this port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
igmpPortNumOfActiveGroups |
1.1.890.1.5.5.6.13.9.1.4 |
The total number of active IGMP groups in this port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
gbondStateTable |
1.1.890.1.5.5.6.13.51.1 |
A table containing the G.Bond configuration information for
each bonding group of the device. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
GbondStateEntry |
|
gbondStateEntry |
1.1.890.1.5.5.6.13.51.1.1 |
An entry of gbondTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
GbondStateEntry |
|
|
gbondStateName |
1.1.890.1.5.5.6.13.51.1.1.1 |
An administratively assigned string, which identifies the bonding group. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..31) |
|
gbondStateSid |
1.1.890.1.5.5.6.13.51.1.1.2 |
This object indicates the sequence index mode of the bonding group. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
sid8(1), sid12(2) |
|
gbondStateMember |
1.1.890.1.5.5.6.13.51.1.1.5 |
Indicate if the port is a member port of the bonding group.
The target is encoded
as:
Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5: Each bit in the octet specifies a port from MSB to LSB.
for example: 32(hex) = 50(dec) = 00110010(bin) means the port 3, 4 and 7. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
gbondStatelinkup |
1.1.890.1.5.5.6.13.51.1.1.6 |
Indicate if the link status of port is bidirectional.
The target is encoded
as:
Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5: Each bit in the octet specifies a port from MSB to LSB.
for example: 32(hex) = 50(dec) = 00110010(bin) means the port 3, 4 and 7. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
gbondStateTx |
1.1.890.1.5.5.6.13.51.1.1.7 |
Indicate if the link status of port is Tx only.
The target is encoded
as:
Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5: Each bit in the octet specifies a port from MSB to LSB.
for example: 32(hex) = 50(dec) = 00110010(bin) means the port 3, 4 and 7. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
gbondStateRx |
1.1.890.1.5.5.6.13.51.1.1.8 |
Indicate if the link status of port is Rx only.
The target is encoded
as:
Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5: Each bit in the octet specifies a port from MSB to LSB.
for example: 32(hex) = 50(dec) = 00110010(bin) means the port 3, 4 and 7. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
gbondStatelinkdown |
1.1.890.1.5.5.6.13.51.1.1.9 |
Indicate if the link status of the port is down.
The target is encoded
as:
Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5: Each bit in the octet specifies a port from MSB to LSB.
for example: 32(hex) = 50(dec) = 00110010(bin) means the port 3, 4 and 7. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
counterClearTarget |
1.1.890.1.5.5.6.14.1 |
This managed object is used for identify the target on which
the counter would be cleared. The target is encoded as:
Byte 1: reserved
Byte 2~3: reserved
Byte 4: reserved
Byte 5~11:each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
counterClearOps |
1.1.890.1.5.5.6.14.2 |
The corresponding bit is set to 1 to start the operation.
The various bit positions are:
BIT 1: clear interface counters
BIT 2: clear pvc packet counters
BIT 3: clear port ATM counters
BIT 4: clear pvc ATM counters
BIT 5: clear DHCP counters
BIT 6: clear IGMP counters
BIT 7: clear IGMP port counters |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
counterClearVpi |
1.1.890.1.5.5.6.14.3 |
VPI of the pvc whose counters would be cleared. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
counterClearVci |
1.1.890.1.5.5.6.14.4 |
VCI of the pvc whose counters would be cleared. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
object |
1.1.890.1.5.5.6.12.1 |
OBJECT IDENTIFIER |
|
|
|
equipment |
1.1.890.1.5.5.6.12.3 |
OBJECT IDENTIFIER |
|
|
|
systrap |
1.1.890.1.5.5.6.12.4 |
OBJECT IDENTIFIER |
|
|
|
sysMacAntiSpoofOrig |
1.1.890.1.5.5.6.12.1.9 |
The Original port of Mac-AntiSpoofing. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
sysMacAntiSpoofNew |
1.1.890.1.5.5.6.12.1.10 |
The New port of Mac-AntiSpoofing. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
eqptHWMonitorFailure |
1.1.890.1.5.5.6.12.3.1 |
Hardware monitor diagnosis is failed. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
sysMacAntiSpoofing |
1.1.890.1.5.5.6.12.4.1 |
MAC Anti-spoofing. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
sysAlarmCutoffEnable |
1.1.890.1.5.5.6.12.4.2 |
Alarm cutoff is activated. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
sysAlarmClearEnable |
1.1.890.1.5.5.6.12.4.3 |
Alarm clear is activated. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
sysLoginFailure |
1.1.890.1.5.5.6.12.4.4 |
User login is failed. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rpvcGatewayTable |
1.1.890.1.5.5.6.8.8.1 |
This table includes Routed Gateway configuration. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
RpvcGatewayEntry |
|
rpvcGatewayEntry |
1.1.890.1.5.5.6.8.8.1.1 |
An entry in Routed Gateway table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RpvcGatewayEntry |
|
|
rpvcGatewayIp |
1.1.890.1.5.5.6.8.8.1.1.1 |
IP of RPVC gateway. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
rpvcGatewayVlanId |
1.1.890.1.5.5.6.8.8.1.1.2 |
Vlan id send to this RPVC gateway. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
VlanIndex |
|
|
rpvcGatewayRowStatus |
1.1.890.1.5.5.6.8.8.1.1.3 |
This object is used to create a new row or delete an existing row in this table. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
rpvcGatewayPriority |
1.1.890.1.5.5.6.8.8.1.1.4 |
802.1p p bit send to this RPVC gateway. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rpvcTable |
1.1.890.1.5.5.6.8.8.2 |
This table includes RPVC configuration. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
RpvcTableEntry |
|
rpvcTableEntry |
1.1.890.1.5.5.6.8.8.2.1 |
An entry in rpvcTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RpvcTableEntry |
|
|
rpvcVpi |
1.1.890.1.5.5.6.8.8.2.1.1 |
VPI of the rpvc. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
rpvcVci |
1.1.890.1.5.5.6.8.8.2.1.2 |
VCI of the rpvc. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
rpvcDSProfile |
1.1.890.1.5.5.6.8.8.2.1.3 |
The down stream profile of the rpvc. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..31) |
|
rpvcUSProfile |
1.1.890.1.5.5.6.8.8.2.1.4 |
The up stream profile of the rpvc. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..31) |
|
rpvcIp |
1.1.890.1.5.5.6.8.8.2.1.5 |
The IP of the rpvc. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
rpvcNetmask |
1.1.890.1.5.5.6.8.8.2.1.6 |
The IP mask of the rpvc IP. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
rpvcRowStatus |
1.1.890.1.5.5.6.8.8.2.1.8 |
This object is used to create a new row or delete an existing row in this table. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
rpvcRouteDomainTable |
1.1.890.1.5.5.6.8.8.3 |
This table includes RPVC route domain configuration. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
RpvcRouteDomainTableEntry |
|
rpvcRouteDomainTableEntry |
1.1.890.1.5.5.6.8.8.3.1 |
An entry in rpvcRouteDomainTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RpvcRouteDomainTableEntry |
|
|
rpvcRouteDomainVpi |
1.1.890.1.5.5.6.8.8.3.1.1 |
VPI of the rpvc. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
rpvcRouteDomainVci |
1.1.890.1.5.5.6.8.8.3.1.2 |
VCI of the rpvc. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
rpvcRouteDomainIp |
1.1.890.1.5.5.6.8.8.3.1.3 |
The route domain IP. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
rpvcRouteDomainNetmask |
1.1.890.1.5.5.6.8.8.3.1.4 |
The IP mask of the route domain IP. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
rpvcRouteDomainRowStatus |
1.1.890.1.5.5.6.8.8.3.1.5 |
This object is used to create a new row or delete an existing row in this table. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
rpvcArpAgingTime |
1.1.890.1.5.5.6.8.8.4 |
Set RPVC ARP proxy aging time 10..10000 seconds,
0 to disable againg. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rpvcArpFlush |
1.1.890.1.5.5.6.8.8.5 |
Flush the RPVC ARP proxy table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1) |
|
dsBcastDisableEntry |
1.1.890.1.5.5.6.8.9.1 |
An entry in Down Stream Bcast table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
DsBcastDisableEntry |
|
|
dsBcastDisableVlanId |
1.1.890.1.5.5.6.8.9.1.1 |
downstream broadcast disabled vid. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
dsBcastDisableRowStatus |
1.1.890.1.5.5.6.8.9.1.2 |
This object is used to create a new row or delete an existing row in this table. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|