
| RFC1155-SMI | RFC-1212 | RFC-1215 |
| FDDI-SMT73-MIB |
| a3Com | 1.3.6.1.4.1.43 | ||
| OBJECT IDENTIFIER | |||
| switchingSystemsMibs | 1.3.6.1.4.1.43.29 | ||
| OBJECT IDENTIFIER | |||
| a3ComSwitchingSystemsFddiMib | 1.3.6.1.4.1.43.29.10 | ||
| OBJECT IDENTIFIER | |||
| a3ComFddiSMT | 1.3.6.1.4.1.43.29.10.1 | ||
| OBJECT IDENTIFIER | |||
| a3ComFddiSMTHoldCondition | 1.3.6.1.4.1.43.29.10.1 | ||
| Generated when fddiSMTHoldState (fddimibSMTHoldState) assumes the state holding-prm or holding-sec. This notification is a Condition in the Status Report Protocol (see 7.2.7 and 8.3). | |||
| TRAP-TYPE | |||
| fddimibSMTStationId | |||
| a3ComFddiSMTHoldState | |||
| a3ComFddiSMTTable | 1.3.6.1.4.1.43.29.10.1.1 | ||
| A list of optional SMT entries. The number of entries shall not exceed the value of snmpFddiSMTNumber. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| A3ComFddiSMTEntry | |||
| a3ComFddiSMTEntry | 1.3.6.1.4.1.43.29.10.1.1.1 | ||
| An optional SMT entry containing information common to a given optional SMT. | |||
| OBJECT-TYPE | |||
| A3ComFddiSMTEntry | |||
| a3ComFddiSMTIndex | 1.3.6.1.4.1.43.29.10.1.1.1.1 | ||
| A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| a3ComFddiSMTManufacturerOUI | 1.3.6.1.4.1.43.29.10.1.1.1.2 | ||
| The three octets of manufacturer data which make up the manufacturerOUI component. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(3) | ||
| a3ComFddiSMTManufacturerData | 1.3.6.1.4.1.43.29.10.1.1.1.3 | ||
| The 29 octets of manufacturer data which make up the manufacturerData component. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(29) | ||
| a3ComFddiSMTHoldState | 1.3.6.1.4.1.43.29.10.1.1.1.4 | ||
| This variable indicates the current state of the Hold function. The value 'not-holding' is the default and initial value. The value must be set to 'not-holding' as part of Active-Actions and when the conditions causing 'holding-prm' or 'holding-sec' are no longer true. The value 'holding-prm' must be set when the condition (notTR-Flag & not RE-Flag & (PC-LS=QLS | LEM-Fail TNE>NS-Max | (not LS-Flag & TPC > T-Out))) is satisfied in state PC8:ACTIVE for the A Port. The value 'holding-sec' must be set when the condition (notTR-Flag & not RE-Flag & (PC-LS=QLS | LEM-Fail TNE>NS-Max | (not LS-Flag & TPC > T-Out))) is satisfied in state PC8:ACTIVE for the B Port. | |||
| OBJECT-TYPE | |||
| INTEGER | not-implemented(1), not-holding(2), holding-prm(3), holding-sec(4) | ||
| a3ComFddiSMTSetCount | 1.3.6.1.4.1.43.29.10.1.1.1.5 | ||
| This variable is composed of a count incremented in response to a Set operation on the MIB, and the time of the change, however only the count is reported here (refer to ANSI SMT 8.4.1). | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| a3ComFddiSMTLastSetStationId | 1.3.6.1.4.1.43.29.10.1.1.1.6 | ||
| The Station ID of the station that effected the last change in the FDDI MIB. | |||
| OBJECT-TYPE | |||
| FddiSMTStationIdType | |||
| a3ComFddiMAC | 1.3.6.1.4.1.43.29.10.2 | ||
| OBJECT IDENTIFIER | |||
| a3ComFddiSMTPeerWrapCondition | 1.3.6.1.4.1.43.29.10.2 | ||
| This condition is active when fddiSMTPeerWrapFlag (fddimibSMTPeerWrapFlag) is set. This notification is a Condition in the Status Report Protocol (see 7.2.7 and 8.3). | |||
| TRAP-TYPE | |||
| fddimibSMTStationId | |||
| fddimibSMTCFState | |||
| fddimibSMTPeerWrapFlag | |||
| a3ComFddiMACBridgeFunctionTable | 1.3.6.1.4.1.43.29.10.2.1 | ||
| A list of MAC bridge function entries. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| A3ComFddiMACBridgeFunctionEntry | |||
| a3ComFddiMACBridgeFunctionEntry | 1.3.6.1.4.1.43.29.10.2.1.1 | ||
| Bridge function information for a given MAC within a given SMT. | |||
| OBJECT-TYPE | |||
| A3ComFddiMACBridgeFunctionEntry | |||
| a3ComFddiMACBridgeFunctionSMTIndex | 1.3.6.1.4.1.43.29.10.2.1.1.1 | ||
| A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| a3ComFddiMACBridgeFunctionMACIndex | 1.3.6.1.4.1.43.29.10.2.1.1.2 | ||
| Index variable for uniquely identifying the MAC object instances. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| a3ComFddiMACBridgeFunctions | 1.3.6.1.4.1.43.29.10.2.1.1.3 | ||
| Indicates the MAC's optional bridging functions. The Value -1 is used to indicate that bridging is not supported by this MAC. The value is a sum. This value initially takes the value zero, then for each function present, 2 raised to a power is added to the sum. The powers are according to the following table: Function Power tb 0 -- Transparent bridging active sr 1 -- Src routing active srt 2 -- Src routing transparent active | |||
| OBJECT-TYPE | |||
| INTEGER | -1..7 | ||
| a3ComFddiMACTPriTable | 1.3.6.1.4.1.43.29.10.2.2 | ||
| A list of MAC T-Pri entries. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| A3ComFddiMACTPriEntry | |||
| a3ComFddiMACTPriEntry | 1.3.6.1.4.1.43.29.10.2.2.1 | ||
| A collection of T-Pri information for a given MAC within a given SMT. | |||
| OBJECT-TYPE | |||
| A3ComFddiMACTPriEntry | |||
| a3ComFddiMACTPriSMTIndex | 1.3.6.1.4.1.43.29.10.2.2.1.1 | ||
| A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| a3ComFddiMACTPriMACIndex | 1.3.6.1.4.1.43.29.10.2.2.1.2 | ||
| Index variable for uniquely identifying the MAC object instances. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| a3ComFddiMACTPri0 | 1.3.6.1.4.1.43.29.10.2.2.1.3 | ||
| This attribute is an unsigned twos-complement T-pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. | |||
| OBJECT-TYPE | |||
| FddiTimeNano | |||
| a3ComFddiMACTPri1 | 1.3.6.1.4.1.43.29.10.2.2.1.4 | ||
| This attribute is an unsigned twos-complement T-pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. | |||
| OBJECT-TYPE | |||
| FddiTimeNano | |||
| a3ComFddiMACTPri2 | 1.3.6.1.4.1.43.29.10.2.2.1.5 | ||
| This attribute is an unsigned twos-complement T-pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. | |||
| OBJECT-TYPE | |||
| FddiTimeNano | |||
| a3ComFddiMACTPri3 | 1.3.6.1.4.1.43.29.10.2.2.1.6 | ||
| This attribute is an unsigned twos-complement T-pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. | |||
| OBJECT-TYPE | |||
| FddiTimeNano | |||
| a3ComFddiMACTPri4 | 1.3.6.1.4.1.43.29.10.2.2.1.7 | ||
| This attribute is an unsigned twos-complement T-pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. | |||
| OBJECT-TYPE | |||
| FddiTimeNano | |||
| a3ComFddiMACTPri5 | 1.3.6.1.4.1.43.29.10.2.2.1.8 | ||
| This attribute is an unsigned twos-complement T-pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. | |||
| OBJECT-TYPE | |||
| FddiTimeNano | |||
| a3ComFddiMACTPri6 | 1.3.6.1.4.1.43.29.10.2.2.1.9 | ||
| This attribute is an unsigned twos-complement T-pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. | |||
| OBJECT-TYPE | |||
| FddiTimeNano | |||
| a3ComFddiPATH | 1.3.6.1.4.1.43.29.10.3 | ||
| OBJECT IDENTIFIER | |||
| a3ComFddiMACDuplicateAddressCondition | 1.3.6.1.4.1.43.29.10.3 | ||
| This condition is active when either fddiMACDA-Flag (fddimibMACDaFlag) or fddiMACUNDA-Flag (fddimibMACUnaDaFlag) is set. This event is handled as a Condition in the Status Report Protocol (see 7.2.7 and 8.3). | |||
| TRAP-TYPE | |||
| fddimibSMTStationId | |||
| fddimibMACSMTAddress | |||
| fddimibMACUpstreamNbr | |||
| fddimibMACDaFlag | |||
| fddimibMACUnaDaFlag | |||
| a3ComFddiPATHRingTable | 1.3.6.1.4.1.43.29.10.3.1 | ||
| A list of PATH ring entries. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| A3ComFddiPATHRingEntry | |||
| a3ComFddiPATHRingEntry | 1.3.6.1.4.1.43.29.10.3.1.1 | ||
| Ring latency, trace status, and T-Rmode information for a given PATH within a given SMT. | |||
| OBJECT-TYPE | |||
| A3ComFddiPATHRingEntry | |||
| a3ComFddiPATHRingSMTIndex | 1.3.6.1.4.1.43.29.10.3.1.1.1 | ||
| A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| a3ComFddiPATHRingPATHIndex | 1.3.6.1.4.1.43.29.10.3.1.1.2 | ||
| Index variable for uniquely identifying the primary, secondary and local PATH object instances. Local PATH object instances are represented with integer values 3 to 255. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| a3ComFddiPATHRingLatency | 1.3.6.1.4.1.43.29.10.3.1.1.3 | ||
| Gives the total accumulated latency of the ring associated with this path. May be measured directly by the station or calculated by a management station. Values of this object are reported in 1 ns units. | |||
| OBJECT-TYPE | |||
| FddiTimeNano | |||
| a3ComFddiPATHTraceStatus | 1.3.6.1.4.1.43.29.10.3.1.1.4 | ||
| This attribute indicates the current trace status of the path. The value is a sum which represents all of the trace status information which applies. This value initially takes the value zero, then for each condition which applies, 2 raised to a power is added to the sum. the powers are according to the following table: TraceStatus Power traceinitiated 0 tracepropragated 1 traceterminated 2 tracetimeout 3 | |||
| OBJECT-TYPE | |||
| INTEGER | 0..15 | ||
| a3ComFddiPATHT-Rmode | 1.3.6.1.4.1.43.29.10.3.1.1.5 | ||
| Used by RMT to limit the duration of restricted dialogs on a path. This object is reported in 1 ns units. | |||
| OBJECT-TYPE | |||
| FddiTimeNano | |||
| a3ComFddiPATHSbaTable | 1.3.6.1.4.1.43.29.10.3.2 | ||
| A list of PATH Sba entries. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| A3ComFddiPATHSbaEntry | |||
| a3ComFddiPATHSbaEntry | 1.3.6.1.4.1.43.29.10.3.2.1 | ||
| Sba information for a given PATH within a given SMT. | |||
| OBJECT-TYPE | |||
| A3ComFddiPATHSbaEntry | |||
| a3ComFddiPATHSbaSMTIndex | 1.3.6.1.4.1.43.29.10.3.2.1.1 | ||
| A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| a3ComFddiPATHSbaPATHIndex | 1.3.6.1.4.1.43.29.10.3.2.1.2 | ||
| Index variable for uniquely identifying the primary, secondary and local PATH object instances. Local PATH object instances are represented with integer values 3 to 255. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| a3ComFddiPATHSbaPayload | 1.3.6.1.4.1.43.29.10.3.2.1.3 | ||
| The payload portion of the Synchronous Bandwidth Allocation for thi path. This value represents the maximum number of bytes of data allocated for transmission per 125 microseconds. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1562 | ||
| a3ComFddiPATHSbaOverhead | 1.3.6.1.4.1.43.29.10.3.2.1.4 | ||
| The overhead portion of the Synchronous Bandwith Allocation for this path. This value repersents the maximum number of bytes overhead (token capture, frame header, etc.) used pre negotiated Target Token Rotation Time (T-neg). | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| a3ComFddiPATHSbaAvailable | 1.3.6.1.4.1.43.29.10.3.2.1.5 | ||
| This value is the maximum Synchronous Bandwith available for a path in bytes per second. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..12500000 | ||
| a3ComFddiPORT | 1.3.6.1.4.1.43.29.10.4 | ||
| OBJECT IDENTIFIER | |||
| a3ComFddiMACFrameErrorCondition | 1.3.6.1.4.1.43.29.10.4 | ||
| Generated when the fddiMACFrameErrorRatio (fddimibMACFrameErrorRatio) is greater than or equal to fddiMACFrameErrorThreshold (fddimibMACFrameErrorThreshold). This event is handled as a Condition in the Status Report Protocol (see 7.2.7 and 8.3). | |||
| TRAP-TYPE | |||
| fddimibSMTStationId | |||
| fddimibMACFrameErrorFlag | |||
| fddimibMACFrameCts | |||
| fddimibMACErrorCts | |||
| fddimibMACLostCts | |||
| fddimibMACFrameErrorRatio | |||
| a3ComFddiPORTTable | 1.3.6.1.4.1.43.29.10.4.1 | ||
| A list of optional PORT entries. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| A3ComFddiPORTEntry | |||
| a3ComFddiPORTEntry | 1.3.6.1.4.1.43.29.10.4.1.1 | ||
| MAC loop time and EB error count information for a given PORT within a given SMT. | |||
| OBJECT-TYPE | |||
| A3ComFddiPORTEntry | |||
| a3ComFddiPORTSMTIndex | 1.3.6.1.4.1.43.29.10.4.1.1.1 | ||
| A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| a3ComFddiPORTIndex | 1.3.6.1.4.1.43.29.10.4.1.1.2 | ||
| Index variable for uniquely identifying the PORT object instances. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| a3ComFddiPORTMACLoopTime | 1.3.6.1.4.1.43.29.10.4.1.1.3 | ||
| This attribute controls the value used for T-Next(9) (see 9.4.4.2.3). This object is reported in 1 ns units. | |||
| OBJECT-TYPE | |||
| FddiTimeNano | |||
| a3ComFddiPORTEBErrorCt | 1.3.6.1.4.1.43.29.10.4.1.1.4 | ||
| A count that should as closely as possible match the times an Elasticity Buffer Error has occurred while in active line state. | |||
| OBJECT-TYPE | |||
| Counter | |||
| a3ComFddiPORTLSTable | 1.3.6.1.4.1.43.29.10.4.2 | ||
| A list of optional PORT line state entries. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| A3ComFddiPORTLSEntry | |||
| a3ComFddiPORTLSEntry | 1.3.6.1.4.1.43.29.10.4.2.1 | ||
| Maintenance line state and PC line state information for a given PORT within a given SMT. | |||
| OBJECT-TYPE | |||
| A3ComFddiPORTLSEntry | |||
| a3ComFddiPORTLSSMTIndex | 1.3.6.1.4.1.43.29.10.4.2.1.1 | ||
| A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| a3ComFddiPORTLSPORTIndex | 1.3.6.1.4.1.43.29.10.4.2.1.2 | ||
| Index variable for uniquely identifying the PORT object instances. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| a3ComFddiPORTMaintLS | 1.3.6.1.4.1.43.29.10.4.2.1.3 | ||
| The PORT Maintenance Line State specifies the line state (Maint-LS) to be transmitted when the PCM state machine for the port is in state PC9 Maint. | |||
| OBJECT-TYPE | |||
| INTEGER | quiet(1), idle(2), master(3), halt(4), receive-active(5), receive-unknown(6), receive-noise(7) | ||
| a3ComFddiPORTPCLS | 1.3.6.1.4.1.43.29.10.4.2.1.4 | ||
| This attribute indicates the line state (PC-LS) received by the port. | |||
| OBJECT-TYPE | |||
| INTEGER | quiet(1), idle(2), master(3), halt(4), receive-active(5), receive-unknown(6), receive-noise(7) | ||
| a3ComFddiMACNotCopiedCondition | 1.3.6.1.4.1.43.29.10.5 | ||
| Generated when the fddiMACNotCopiedRatio (fddimibMACNotCopiedRatio) is greater than or equal to the fddiMACNotCopiedThreshold (a3ComFddiMACNotCopiedThreshold). This event is handled as a Condition in the Status Report Protocol (see 7.2.7 and 8.3). | |||
| TRAP-TYPE | |||
| fddimibSMTStationId | |||
| fddimibMACNotCopiedCts | |||
| fddimibMACCopiedCts | |||
| fddimibMACNotCopiedRatio | |||
| fddimibMACNotCopiedFlag | |||
| a3ComFddiMACNeighborChangeEvent | 1.3.6.1.4.1.43.29.10.6 | ||
| Generated when a change in a MAC's upstream neighbor address or downstream neighbor address is detected. (see 7.2.7 and 8.3). | |||
| TRAP-TYPE | |||
| fddimibSMTStationId | |||
| fddimibMACUpstreamNbr | |||
| fddimibMACOldUpstreamNbr | |||
| fddimibMACDownstreamNbr | |||
| fddimibMACOldDownstreamNbr | |||
| fddimibMACCurrentPath | |||
| fddimibMACSMTAddress | |||
| a3ComFddiMACPathChangeEvent | 1.3.6.1.4.1.43.29.10.7 | ||
| This event is generated when the value of the fddiMACCurrentPath (fddimibMACCurrentPath) changes. This event shall be supressed if the value changes from isolated to local or local to isolated (see 7.2.7 and 8.3). | |||
| TRAP-TYPE | |||
| fddimibSMTStationId | |||
| fddimibMACAvailablePaths | |||
| fddimibMACCurrentPath | |||
| fddimibMACRequestedPaths | |||
| a3ComFddiPORTLerCondition | 1.3.6.1.4.1.43.29.10.8 | ||
| This condition becomes active when the value of fddiPORTLer-Estimate (fddimibPORTLerEstimate) is less than or equal to fddiPORTLer-Alarm (fddimibPORTLerAlarm). This will be reported with the Status Report Frames (SRF) (see 7.2.7 and 8.3). | |||
| TRAP-TYPE | |||
| fddimibSMTStationId | |||
| fddimibPORTLerCutoff | |||
| fddimibPORTLerAlarm | |||
| fddimibPORTLerEstimate | |||
| fddimibPORTLemRejectCts | |||
| fddimibPORTLemCts | |||
| fddimibPORTLerFlag | |||
| a3ComFddiPORTUndesiredConnAttemptEvent | 1.3.6.1.4.1.43.29.10.9 | ||
| Generated when an undesired connection attempt has been made (see 5.2.4, 7.2.7, and 8.3). | |||
| TRAP-TYPE | |||
| fddimibSMTStationId | |||
| fddimibPORTMyType | |||
| fddimibPORTConnectState | |||
| fddimibPORTNeighborType | |||
| fddimibPORTPCWithhold | |||
| a3ComFddiPORTEBErrorCondition | 1.3.6.1.4.1.43.29.10.10 | ||
| Generated when the Elasticity Buffer Error-Ct (a3ComFddiPORTEBErrorCt) increments. This is handled as a condition in the Status Report Protocol. It is generated when an increment occurs in the station's sampling period (see 7.2.7 and 8.3). | |||
| TRAP-TYPE | |||
| fddimibSMTStationId | |||
| a3ComFddiPORTEBErrorCt | |||
| a3ComFddiPORTPathChangeEvent | 1.3.6.1.4.1.43.29.10.11 | ||
| This event is generated when the value of the fddiPORTCurrentPath (a3ComFddiPORTCurrentPath) changes. This event shall be surpressed if the value changes from isolated to local or local to isolated (see 7.2.7 and 8.3). | |||
| TRAP-TYPE | |||
| fddimibSMTStationId | |||
| fddimibPORTAvailablePaths | |||
| fddimibPORTCurrentPath | |||
| fddimibPORTRequestedPaths | |||
| fddimibPORTMyType | |||
| fddimibPORTNeighborType | |||
| A3ComFddiSMTEntry | |||
| SEQUENCE | |||
| INTEGER as a3ComFddiSMTIndex | |||
| OCTET STRING as a3ComFddiSMTManufacturerOUI | |||
| OCTET STRING as a3ComFddiSMTManufacturerData | |||
| INTEGER as a3ComFddiSMTHoldState | |||
| INTEGER as a3ComFddiSMTSetCount | |||
| FddiSMTStationIdType as a3ComFddiSMTLastSetStationId | |||
| A3ComFddiMACBridgeFunctionEntry | |||
| SEQUENCE | |||
| INTEGER as a3ComFddiMACBridgeFunctionSMTIndex | |||
| INTEGER as a3ComFddiMACBridgeFunctionMACIndex | |||
| INTEGER as a3ComFddiMACBridgeFunctions | |||
| A3ComFddiMACTPriEntry | |||
| SEQUENCE | |||
| INTEGER as a3ComFddiMACTPriSMTIndex | |||
| INTEGER as a3ComFddiMACTPriMACIndex | |||
| FddiTimeNano as a3ComFddiMACTPri0 | |||
| FddiTimeNano as a3ComFddiMACTPri1 | |||
| FddiTimeNano as a3ComFddiMACTPri2 | |||
| FddiTimeNano as a3ComFddiMACTPri3 | |||
| FddiTimeNano as a3ComFddiMACTPri4 | |||
| FddiTimeNano as a3ComFddiMACTPri5 | |||
| FddiTimeNano as a3ComFddiMACTPri6 | |||
| A3ComFddiPATHRingEntry | |||
| SEQUENCE | |||
| INTEGER as a3ComFddiPATHRingSMTIndex | |||
| INTEGER as a3ComFddiPATHRingPATHIndex | |||
| FddiTimeNano as a3ComFddiPATHRingLatency | |||
| INTEGER as a3ComFddiPATHTraceStatus | |||
| FddiTimeNano as a3ComFddiPATHT-Rmode | |||
| A3ComFddiPATHSbaEntry | |||
| SEQUENCE | |||
| INTEGER as a3ComFddiPATHSbaSMTIndex | |||
| INTEGER as a3ComFddiPATHSbaPATHIndex | |||
| INTEGER as a3ComFddiPATHSbaPayload | |||
| INTEGER as a3ComFddiPATHSbaOverhead | |||
| INTEGER as a3ComFddiPATHSbaAvailable | |||
| A3ComFddiPORTEntry | |||
| SEQUENCE | |||
| INTEGER as a3ComFddiPORTSMTIndex | |||
| INTEGER as a3ComFddiPORTIndex | |||
| FddiTimeNano as a3ComFddiPORTMACLoopTime | |||
| Counter as a3ComFddiPORTEBErrorCt | |||
| A3ComFddiPORTLSEntry | |||
| SEQUENCE | |||
| INTEGER as a3ComFddiPORTLSSMTIndex | |||
| INTEGER as a3ComFddiPORTLSPORTIndex | |||
| INTEGER as a3ComFddiPORTMaintLS | |||
| INTEGER as a3ComFddiPORTPCLS | |||