
A3COM-SWITCHING-SYSTEMS-FILTER-MIB
File:
A3COM-SWITCHING-SYSTEMS-FILTER-MIB.mib (30789 bytes)
Imported modules
Imported symbols
Defined Objects
| a3Com |
1.3.6.1.4.1.43 |
| OBJECT IDENTIFIER |
|
|
|
| a3ComFilterAddressGroupId |
1.3.6.1.4.1.43.29.4.20.1.3.1.1 |
| This object uniquely identifies an address group in the systems. Its value, successively increases starting from 0, will change only if the system is rebooted. This object is obtained from a3ComFilterAddressGroupNextAvailableIndex when a new address group is created. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| a3ComFilterAddressGroupMaskId |
1.3.6.1.4.1.43.29.4.20.1.3.1.2 |
| This object identifies an address group in a bridge. Each address group has an unique mask identifier, range from 1 to 32, associated with it in a bridge. This field has to be set in order to create a new address group in the desired bridge(s). |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| a3ComFilterAddressGroupBridgeMask |
1.3.6.1.4.1.43.29.4.20.1.3.1.3 |
| A mask that uniquely identifies the bridge value(s) associated with this address group entry. For example, 0x0000 0000 0000 0003 represents the address group entry in bridge number 1 and 2. |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
SIZE(4) |
|
| a3ComFilterAddressGroupStatus |
1.3.6.1.4.1.43.29.4.20.1.3.1.5 |
| The status column for this address group entry. This OBJECT can be set to: createAndGo(4) destroy(6) The following values may be read: active(1) Setting this object to createAndGo(4) will result in the agent attempt to create and commit the row based on the contents of the objects in the row. If all the necessary information is presented in the row and the values are acceptible to the agent, the agent will change the status to active(1). If there are any necessary objects are not set, the agent will reject the creation request. Setting this object to destroy(6) will delete the corresponding address group and all the attributes of the table. |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| a3ComFilterAddressEntry |
1.3.6.1.4.1.43.29.4.20.1.4.1 |
| A set of parameters for a particular address entry. |
| OBJECT-TYPE |
|
|
|
| |
A3ComFilterAddressEntry |
|
|
| a3ComFilterAddressId |
1.3.6.1.4.1.43.29.4.20.1.4.1.1 |
| This object uniquely identifies an address group as defined in a3ComFilterAddressGroupTable. It is obtained from a3ComFilterAddressGroupNextAvailableIndex. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| a3ComFilterAddressStatus |
1.3.6.1.4.1.43.29.4.20.1.4.1.3 |
| The status column for this address group entry. This OBJECT can be set to: createAndGo(4) destroy(6) The following values may be read: active(1) Setting this object to createAndGo(4) will result in the agent attempt to create and commit the row based on the contents of the objects in the row. If all the necessary information is presented in the row and the values are acceptible to the agent, the agent will change the status to active(1). If there are any necessary objects are not set, the agent will reject the creation request. When the state of the row translates to active(1), the agent add the corresponding address to the specified address group. Setting this object to destroy(6) will remove the corresponding address from the indicated address group. |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| a3ComFilterPortGroupEntry |
1.3.6.1.4.1.43.29.4.20.2.3.1 |
| A set of parameters for an individual port group entry. |
| OBJECT-TYPE |
|
|
|
| |
A3ComFilterPortGroupEntry |
|
|
| a3ComFilterPortGroupId |
1.3.6.1.4.1.43.29.4.20.2.3.1.1 |
| This object uniquely identifies a port group in the systems. Its value, successively increases starting from 0, will change only if the system is rebooted. This object is obtained from a3ComFilterPortGroupNextAvailableIndex when a new port group is created. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| a3ComFilterPortGroupMaskId |
1.3.6.1.4.1.43.29.4.20.2.3.1.2 |
| This object identifies a port group in a bridge. Each port group has an unique mask identifier, range from 1 to 32, associated with it in a bridge. This field has to be set in order to create a new port group in a bridge. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| a3ComFilterPortGroupStatus |
1.3.6.1.4.1.43.29.4.20.2.3.1.5 |
| The status column for this port group entry. This OBJECT can be set to: createAndGo(4) destroy(6) The following values may be read: active(1) Setting this object to createAndGo(4) will result in the agent attempting to create and commit the row based on the contents of the objects in the row. If all the necessary information is presented in the row and the values are acceptible to the agent, the agent will change the status to active(1). If there are any necessary objects are not set, the agent will reject the creation request. When the state of the row translates to active(1), the agent add the corresponding port to the specified port group. Setting this object to destroy(6) will remove the corresponding port group and its mask from the port group table. |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| a3ComFilterPortEntry |
1.3.6.1.4.1.43.29.4.20.2.4.1 |
| An individual port entry. |
| OBJECT-TYPE |
|
|
|
| |
A3ComFilterPortEntry |
|
|
| a3ComFilterPortId |
1.3.6.1.4.1.43.29.4.20.2.4.1.1 |
| This object uniquely identify an address group in the systems. It successively increases starting from 1. This value is obtained through a3ComFilterPortGroupNextAvailableIndex when a new port group needs to be created. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| a3ComFilterPortStatus |
1.3.6.1.4.1.43.29.4.20.2.4.1.4 |
| The status column for this port group entry. This OBJECT can be set to: createAndGo(4) destroy(6) The following values may be read: active(1) Setting this object to createAndGo(4) will result in the agent attempting to create and commit the row based on the contents of the objects in the row. If all the necessary information is presented in the row and the values are acceptible to the agent, the agent will change the status to active(1). If there are any necessary objects are not set, the agent will reject the creation request. When the state of the row translates to active(1), the agent will add the corresponding port to the indicated port group. Setting this object to destroy(6) will remove this port from corresponding port group. |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| a3ComBridgeFilterNextAvailableIndex |
1.3.6.1.4.1.43.29.4.20.3.1 |
| The value of next available a3ComBridgeFilterId. This object indicates filter id when a new bridge filter is created through console or ftp download. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| a3ComBridgeFilterEntry |
1.3.6.1.4.1.43.29.4.20.3.3.1 |
| The set of parameters for an individual bridge packet filter program. |
| OBJECT-TYPE |
|
|
|
| |
A3ComBridgeFilterEntry |
|
|
| a3ComBridgeFilterId |
1.3.6.1.4.1.43.29.4.20.3.3.1.1 |
| An index that uniquely identifies a bridge filter in a system. Its value will change only if the system is rebooted. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| a3ComBridgeFilterStatus |
1.3.6.1.4.1.43.29.4.20.3.3.1.5 |
| The status column for this filter definition entry. This OBJECT can be set to: createAndGo(4) destroy(6) The following values may be read: active(1) Creation of bridge filter programs can be performed by: 1. Using the build-in editor of the AdminConsole. 2. Using your own line on an external host, and transferring the filter program via the AdminConsole. 3. Using the filter program creation tool on an external host, which builds the filter and transfers it to the LANPlex using SNMP. The transfer is accomplished using the file transfer MIB in the LANPlex system MIB. Setting this object to createAndGo(4) will result in the agent attempting to create and commit the row based on the contents of the objects in the row. If all the necessary information is presented in the row and the values are acceptible to the agent, the agent will change the status to active(1). If there are any necessary objects are not set, the agent will reject the creation request. When the state of the row translates to active(1), the agent will add the corresponding filter to the specified packet processing path(s) of the bridge port(s) in a bridge. Setting this object to destroy(6) will remove all corresponding attributes of the filter table. |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| a3ComPortFilterEntry |
1.3.6.1.4.1.43.29.4.20.3.4.1 |
| The set of parameters for an individual bridge packet filter program. |
| OBJECT-TYPE |
|
|
|
| |
A3ComPortFilterEntry |
|
|
| a3ComPortFilterId |
1.3.6.1.4.1.43.29.4.20.3.4.1.1 |
| An index that uniquely identifies a bridge filter on the bridge. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| a3ComPortFilterPktProcessPath |
1.3.6.1.4.1.43.29.4.20.3.4.1.5 |
| The packet processing path to apply the filter. The value is a bit mask defined as follows: Mask Value Path Description 0x1 Xmit All All frames xmitted to segment connected to the port 0x2 Xmit Multicast Multicast+broadcast frames xmitted to the segment connected to the port 0x4 Recv All All frame received by the port from the segment connected to the port 0x8 Recv Multicast Multicast+broadcast frames received by the port from the segement connected to the port. If mask value is set to 0x10, the packet filter will be loaded to both transmit multicast and receive multicast paths. Once a bridge filter program has been downloaded to a bridge port path, this object can be applied to change its value. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| a3ComPortFilterStatus |
1.3.6.1.4.1.43.29.4.20.3.4.1.6 |
| The status column for this filter definition entry. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: active(1) notInService(2) netReady(3). Creation of bridge filter programs can be performed by: 1. Using the build-in editor of the AdminConsole. 2. Using your own line on an external host, and transferring the filter program via the AdminConsole. 3. Using the filter program creation tool on an external host, which builds the filter and transfers it to the LANPlex using SNMP. The transfer is accomplished using the file transfer MIB in the LANPlex system MIB. Setting this object to active(1) is only valid when the current status is active or notInService(2). Setting this object to createAndGo(4) will result in the agent attempt to create and commit the row based on the contents of the objects in the row. If all the necessary information is presented in the row and the values are acceptible to the agent, the agent will change the status to active(1). If there are any necessary objects are not set, the agent will reject the creation request. Setting this object to createAndWait(5) will cause the agent to create a row in this table. This object will change to notInService(2) if all the information is present in the row and the values are acceptible to the agent; otherwise, the agent will set the status to notReady(3). When the state of the row translates to active(1), the agent will add the corresponding filter to the specified packet processing path(s) of the bridge port(s) in a bridge. Setting this object to destroy(6) will remove all corresponding attributes of the filter table. |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
Defined Objects
| RowStatus |
|
| INTEGER |
active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) |
|
|
| A3ComFilterAddressGroupEntry |
|
| SEQUENCE |
|
|
|
| |
INTEGER as a3ComFilterAddressGroupId |
|
|
| |
INTEGER as a3ComFilterAddressGroupMaskId |
|
|
| |
OCTET STRING as a3ComFilterAddressGroupBridgeMask |
|
|
| |
DisplayString as a3ComFilterAddressGroupName |
|
|
| |
RowStatus as a3ComFilterAddressGroupStatus |
|
|
| A3ComFilterAddressEntry |
|
| SEQUENCE |
|
|
|
| |
INTEGER as a3ComFilterAddressId |
|
|
| |
PhysAddress as a3ComFilterAddressAddress |
|
|
| |
RowStatus as a3ComFilterAddressStatus |
|
|
| A3ComFilterPortGroupEntry |
|
| SEQUENCE |
|
|
|
| |
INTEGER as a3ComFilterPortGroupId |
|
|
| |
INTEGER as a3ComFilterPortGroupMaskId |
|
|
| |
INTEGER as a3ComFilterPortGroupBridgeNumber |
|
|
| |
DisplayString as a3ComFilterPortGroupName |
|
|
| |
RowStatus as a3ComFilterPortGroupStatus |
|
|
| A3ComFilterPortEntry |
|
| SEQUENCE |
|
|
|
| |
INTEGER as a3ComFilterPortId |
|
|
| |
A3ComFilterPortType as a3ComFilterPortType |
|
|
| |
INTEGER as a3ComFilterPortPort |
|
|
| |
RowStatus as a3ComFilterPortStatus |
|
|
| A3ComBridgeFilterEntry |
|
| SEQUENCE |
|
|
|
| |
INTEGER as a3ComBridgeFilterId |
|
|
| |
INTEGER as a3ComBridgeFilterBridgeNumber |
|
|
| |
DisplayString as a3ComBridgeFilterName |
|
|
| |
DisplayString as a3ComBridgeFilterProgram |
|
|
| |
RowStatus as a3ComBridgeFilterStatus |
|
|
| A3ComPortFilterEntry |
|
| SEQUENCE |
|
|
|
| |
INTEGER as a3ComPortFilterId |
|
|
| |
INTEGER as a3ComPortFilterBridgeNumber |
|
|
| |
A3ComFilterPortType as a3ComPortFilterBridgePortType |
|
|
| |
INTEGER as a3ComPortFilterBridgePortPort |
|
|
| |
INTEGER as a3ComPortFilterPktProcessPath |
|
|
| |
RowStatus as a3ComPortFilterStatus |
|
|