
| RFC1155-SMI | SNMPv2-SMI | SNMPv2-TC |
| SNMPv2-CONF | DLINK-ID-REC-MIB |
| IpAddress | MODULE-IDENTITY | OBJECT-TYPE |
| RowStatus | DisplayString | MODULE-COMPLIANCE |
| OBJECT-GROUP | dlink-common-mgmt |
| swDlinkAACMIB | 1.3.6.1.4.1.171.12.5 | ||
| The Link AAC module MIB. | |||
| MODULE-IDENTITY | |||
| swAACCtrl | 1.3.6.1.4.1.171.12.5.1 | ||
| OBJECT IDENTIFIER | |||
| swAACAuthenAdminState | 1.3.6.1.4.1.171.12.5.1.1 | ||
| This object indicates if the Access Authentication is enabled or disabled. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), disabled(2), enabled(3) | ||
| swAACCtrlEnableAdminSet | 1.3.6.1.4.1.171.12.5.1.2 | ||
| OBJECT IDENTIFIER | |||
| swAACCtrlEnableAdminTACACSState | 1.3.6.1.4.1.171.12.5.1.2.1 | ||
| This object indicates if the state of TACACS is enabled or disabled. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), disabled(2), enabled(3) | ||
| swAACCtrlEnableAdminXTACACSState | 1.3.6.1.4.1.171.12.5.1.2.2 | ||
| This object indicates if the state of XTACACS is enabled or disabled. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), disabled(2), enabled(3) | ||
| swAACCtrlEnableAdminTACACSPlusState | 1.3.6.1.4.1.171.12.5.1.2.3 | ||
| This object indicates if the state of TACACS+ is enabled or disabled. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), disabled(2), enabled(3) | ||
| swAACCtrlEnableAdminRadiusState | 1.3.6.1.4.1.171.12.5.1.2.4 | ||
| This object indicates if the state of Radius is enabled or disabled. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), disabled(2), enabled(3) | ||
| swAACCtrlEnableAdminLocalState | 1.3.6.1.4.1.171.12.5.1.2.5 | ||
| This object indicates if the state of Local is enabled or disabled. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), disabled(2), enabled(3) | ||
| swAACCtrlEnableAdminNoneState | 1.3.6.1.4.1.171.12.5.1.2.6 | ||
| This object indicates if the state of None is enabled or disabled. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), disabled(2), enabled(3) | ||
| swAACInfo | 1.3.6.1.4.1.171.12.5.2 | ||
| OBJECT IDENTIFIER | |||
| swAACMaxLoginMethodList | 1.3.6.1.4.1.171.12.5.2.1 | ||
| The max number of Login method lists supported by the system . | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| swAACMaxEnableMethodList | 1.3.6.1.4.1.171.12.5.2.2 | ||
| The max number of Enable method lists supported by the system . | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| swAACMaxServerGroup | 1.3.6.1.4.1.171.12.5.2.3 | ||
| The max number of Server Group's supported by the system . | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| swAACMaxServer | 1.3.6.1.4.1.171.12.5.2.4 | ||
| The max number of AAC servers supported by the system . | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| swAACLoginMethodListTable | 1.3.6.1.4.1.171.12.5.3 | ||
| A table that contains information about Login authentication method lists. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SwAACLoginMethodListEntry | |||
| swAACLoginMethodListEntry | 1.3.6.1.4.1.171.12.5.3.1 | ||
| A list of the Authentication methods. | |||
| OBJECT-TYPE | |||
| SwAACLoginMethodListEntry | |||
| swAACLoginMethodListName | 1.3.6.1.4.1.171.12.5.3.1.1 | ||
| A human-readable text string of the method list. The string is the same as swAACLoginMethodName. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..15) | ||
| swAACLoginMethod1Type | 1.3.6.1.4.1.171.12.5.3.1.2 | ||
| The type of Login method list. The group type includes tacas(1), xtacacs(2), tacacs-plus(3), radius(4) and server-group(5) for specific users. The keyword type includes local(6), local-enable(7) and none(8). | |||
| OBJECT-TYPE | |||
| INTEGER | tacacs(1), xtacacs(2), tacacs-plus(3), radius(4), server-group(5), local(6), none(8), other(9) | ||
| swAACLoginMethod1ServerGroup | 1.3.6.1.4.1.171.12.5.3.1.3 | ||
| A human-readable text string of the server group. It would be null as swAACLoginMethodListType is with the keyword type and it is writeable, just as the swAACLoginMethodListType is in server_group(3). | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..15) | ||
| swAACLoginMethod2Type | 1.3.6.1.4.1.171.12.5.3.1.4 | ||
| The type of Login method list. The group type includes tacas(1), xtacacs(2), tacacs-plus(3), radius(4) and server-group(5) for specific users. The keyword type includes local(6), local-enable(7) and none(8). | |||
| OBJECT-TYPE | |||
| INTEGER | tacacs(1), xtacacs(2), tacacs-plus(3), radius(4), server-group(5), local(6), none(8), other(9) | ||
| swAACLoginMethod2ServerGroup | 1.3.6.1.4.1.171.12.5.3.1.5 | ||
| A human-readable text string of the server group. It would be null as swAACLoginMethodListType is with the keyword type and it is writeable, just as the swAACLoginMethodListType is in server_group(3). | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..15) | ||
| swAACLoginMethod3Type | 1.3.6.1.4.1.171.12.5.3.1.6 | ||
| The type of Login method list. The group type includes tacas(1), xtacacs(2), tacacs-plus(3), radius(4) and server-group(5) for specific users. The keyword type includes local(6), local-enable(7) and none(8). | |||
| OBJECT-TYPE | |||
| INTEGER | tacacs(1), xtacacs(2), tacacs-plus(3), radius(4), server-group(5), local(6), none(8), other(9) | ||
| swAACLoginMethod3ServerGroup | 1.3.6.1.4.1.171.12.5.3.1.7 | ||
| A human-readable text string of the server group. It would be null as swAACLoginMethodListType is with the keyword type and It is writeable, just as the swAACLoginMethodListType is in server_group(3). | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..15) | ||
| swAACLoginMethod4Type | 1.3.6.1.4.1.171.12.5.3.1.8 | ||
| The type of Login method list. The group type includes tacas(1), xtacacs(2), tacacs-plus(3), radius(4) and server-group(5) for specific users. The keyword type includes local(6), local-enable(7), and none(8). | |||
| OBJECT-TYPE | |||
| INTEGER | tacacs(1), xtacacs(2), tacacs-plus(3), radius(4), server-group(5), local(6), none(8), other(9) | ||
| swAACLoginMethod4ServerGroup | 1.3.6.1.4.1.171.12.5.3.1.9 | ||
| A human-readable text string of the server group. It would be null as swAACLoginMethodListType is for keyword type. And It is writeable, just as the swAACLoginMethodListType is in server_group(3). | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..15) | ||
| swAACLoginMethodListRowStatus | 1.3.6.1.4.1.171.12.5.3.1.10 | ||
| This object indicates the status of this entry. A set request with RowStatus 'CreateAndGo' will fail when the current entry of the table is equal to the maximum number of swAACLoginMethodListIndex. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| swAACEnableMethodListTable | 1.3.6.1.4.1.171.12.5.4 | ||
| A table that contains information about Enable authentication method lists. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SwAACEnableMethodListEntry | |||
| swAACEnableMethodListEntry | 1.3.6.1.4.1.171.12.5.4.1 | ||
| A list of the Authentication methods. | |||
| OBJECT-TYPE | |||
| SwAACEnableMethodListEntry | |||
| swAACEnableMethodListName | 1.3.6.1.4.1.171.12.5.4.1.1 | ||
| A human-readable text string of the method list. The string is the same as swAACEnableMethodName. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..15) | ||
| swAACEnableMethod1Type | 1.3.6.1.4.1.171.12.5.4.1.2 | ||
| The type of Enable method list. The group type includes tacas(1), xtacacs(2), tacacs-plus(3), radius(4) and server-group(5) for user specific. The keyword type includes local(6), local-enable(7) and none(8). | |||
| OBJECT-TYPE | |||
| INTEGER | tacacs(1), xtacacs(2), tacacs-plus(3), radius(4), server-group(5), local-enable(7), none(8), other(9) | ||
| swAACEnableMethod1ServerGroup | 1.3.6.1.4.1.171.12.5.4.1.3 | ||
| A human-readable text string of the server group. It would be null as swAACEnableMethodListType is with the keyword type and it is writeable, just as the swAACEnableMethodListType is in server_group(3). | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..15) | ||
| swAACEnableMethod2Type | 1.3.6.1.4.1.171.12.5.4.1.4 | ||
| The type of Enable method list. The group type includes tacas(1), xtacacs(2), tacacs-plus(3), radius(4) and server-group(5) for user specific. The keyword type includes local(6), local-enable(7) and none(8). | |||
| OBJECT-TYPE | |||
| INTEGER | tacacs(1), xtacacs(2), tacacs-plus(3), radius(4), server-group(5), local-enable(7), none(8), other(9) | ||
| swAACEnableMethod2ServerGroup | 1.3.6.1.4.1.171.12.5.4.1.5 | ||
| A human-readable text string of the server group. It would be null as swAACEnableMethodListType is with the keyword type and it is writeable, just as the swAACEnableMethodListType is in server_group(3). | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..15) | ||
| swAACEnableMethod3Type | 1.3.6.1.4.1.171.12.5.4.1.6 | ||
| The type of Enable method list. The group type includes tacas(1), xtacacs(2), tacacs-plus(3), radius(4) and server-group(5) for specific users. The keyword type includes local(6), local-enable(7) and none(8). | |||
| OBJECT-TYPE | |||
| INTEGER | tacacs(1), xtacacs(2), tacacs-plus(3), radius(4), server-group(5), local-enable(7), none(8), other(9) | ||
| swAACEnableMethod3ServerGroup | 1.3.6.1.4.1.171.12.5.4.1.7 | ||
| A human-readable text string of the server group. It would be null as swAACEnableMethodListType is for keyword type and it is writeable, just as the swAACEnableMethodListType is in server_group(3). | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..15) | ||
| swAACEnableMethod4Type | 1.3.6.1.4.1.171.12.5.4.1.8 | ||
| The type of Enable method list. The group type includes tacas(1), xtacacs(2), tacacs-plus(3), radius(4) and server-group(5) for specific users. The keyword type includes local(6), local-enable(7) and none(8). | |||
| OBJECT-TYPE | |||
| INTEGER | tacacs(1), xtacacs(2), tacacs-plus(3), radius(4), server-group(5), local-enable(7), none(8), other(9) | ||
| swAACEnableMethod4ServerGroup | 1.3.6.1.4.1.171.12.5.4.1.9 | ||
| A human-readable text string of the server group. It would be null as swAACEnableMethodListType is for keyword type and It is writeable, just as the swAACEnableMethodListType is in server_group(3). | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..15) | ||
| swAACEnableMethodListRowStatus | 1.3.6.1.4.1.171.12.5.4.1.10 | ||
| This object indicates the status of this entry. A set request with RowStatus 'CreateAndGo' will fail when the current entry in the table is equal to the maximum number of swAACEnableMethodListIndex. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| swAACAPAuthMethodGroup | 1.3.6.1.4.1.171.12.5.7 | ||
| OBJECT IDENTIFIER | |||
| swAACAPLoginMethod | 1.3.6.1.4.1.171.12.5.7.1 | ||
| OBJECT IDENTIFIER | |||
| swAACAPConsoleLoginMethod | 1.3.6.1.4.1.171.12.5.7.1.1 | ||
| Specifies the way to execute authentication when logging into the system and the method for authentication.Access system via local console | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..15) | ||
| swAACAPTelnetLoginMethod | 1.3.6.1.4.1.171.12.5.7.1.2 | ||
| Specifies the way to execute authentication when logging into the system and the method for authentication.Access system via telnet. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..15) | ||
| swAACAPSSHLoginMethod | 1.3.6.1.4.1.171.12.5.7.1.3 | ||
| Specifies the way to execute authentication when logging into the system and the method for authentication.Access system via SSH. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..15) | ||
| swAACAPHttpLoginMethod | 1.3.6.1.4.1.171.12.5.7.1.4 | ||
| Specifies the way to execute authentication when logging into the system and the method for authentication.Access system via HTTP. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..15) | ||
| swAACAPEnableMethod | 1.3.6.1.4.1.171.12.5.7.2 | ||
| OBJECT IDENTIFIER | |||
| swAACAPConsoleEnableMethod | 1.3.6.1.4.1.171.12.5.7.2.1 | ||
| Specifies the way to execute authentication when logging into the system and the method for authentication.Access system via local console. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..15) | ||
| swAACAPTelnetEnableMethod | 1.3.6.1.4.1.171.12.5.7.2.2 | ||
| Specifies the way to execute authentication when logging into the system and the method for authentication.Access system via telnet. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..15) | ||
| swAACAPSSHEnableMethod | 1.3.6.1.4.1.171.12.5.7.2.3 | ||
| Specifies the way to execute authentication when logging into the system and the method for authentication.Access system via SSH. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..15) | ||
| swAACAPHttpEnableMethod | 1.3.6.1.4.1.171.12.5.7.2.4 | ||
| Specifies the way to execute authentication when logging into the system and the method for authentication.Access system via HTTP. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..15) | ||
| swAACAuthParamGroup | 1.3.6.1.4.1.171.12.5.8 | ||
| OBJECT IDENTIFIER | |||
| swAACAuthParamResponseTimeout | 1.3.6.1.4.1.171.12.5.8.1 | ||
| Timeout in seconds for login authentication response. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| swAACAuthParamAttempt | 1.3.6.1.4.1.171.12.5.8.2 | ||
| The amount of login authentication attempts, if login failure exceeds, connection or access will be locked. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| swAACServerGroupTable | 1.3.6.1.4.1.171.12.5.9 | ||
| A table that contains information about a server group. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SwAACServerGroupEntry | |||
| swAACServerGroupEntry | 1.3.6.1.4.1.171.12.5.9.1 | ||
| A list of the groups including servers. | |||
| OBJECT-TYPE | |||
| SwAACServerGroupEntry | |||
| swAACServerGroupName | 1.3.6.1.4.1.171.12.5.9.1.1 | ||
| A human-readable text string of the method group. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..15) | ||
| swAACServerGroupIPAddr1 | 1.3.6.1.4.1.171.12.5.9.1.2 | ||
| The IP address of Server | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| swAACServerGroupAuthProtocol1 | 1.3.6.1.4.1.171.12.5.9.1.3 | ||
| The authentication protocol provided by the Server. | |||
| OBJECT-TYPE | |||
| INTEGER | tacacs(1), xtacacs(2), tacacs-plus(3), radius(4), none(5), other(6) | ||
| swAACServerGroupIPAddr2 | 1.3.6.1.4.1.171.12.5.9.1.4 | ||
| The IP address of Server | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| swAACServerGroupAuthProtocol2 | 1.3.6.1.4.1.171.12.5.9.1.5 | ||
| The authentication protocol provided by the Server. | |||
| OBJECT-TYPE | |||
| INTEGER | tacacs(1), xtacacs(2), tacacs-plus(3), radius(4), none(5), other(6) | ||
| swAACServerGroupIPAddr3 | 1.3.6.1.4.1.171.12.5.9.1.6 | ||
| The IP address of Server | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| swAACServerGroupAuthProtocol3 | 1.3.6.1.4.1.171.12.5.9.1.7 | ||
| The authentication protocol provided by the Server. | |||
| OBJECT-TYPE | |||
| INTEGER | tacacs(1), xtacacs(2), tacacs-plus(3), radius(4), none(5), other(6) | ||
| swAACServerGroupIPAddr4 | 1.3.6.1.4.1.171.12.5.9.1.8 | ||
| The IP address of the Server | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| swAACServerGroupAuthProtocol4 | 1.3.6.1.4.1.171.12.5.9.1.9 | ||
| The authentication protocol provided by the Server. | |||
| OBJECT-TYPE | |||
| INTEGER | tacacs(1), xtacacs(2), tacacs-plus(3), radius(4), none(5), other(6) | ||
| swAACServerGroupIPAddr5 | 1.3.6.1.4.1.171.12.5.9.1.10 | ||
| The IP address of the Server | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| swAACServerGroupAuthProtocol5 | 1.3.6.1.4.1.171.12.5.9.1.11 | ||
| The authentication protocol provided by the Server. | |||
| OBJECT-TYPE | |||
| INTEGER | tacacs(1), xtacacs(2), tacacs-plus(3), radius(4), none(5), other(6) | ||
| swAACServerGroupIPAddr6 | 1.3.6.1.4.1.171.12.5.9.1.12 | ||
| The IP address of the Server | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| swAACServerGroupAuthProtocol6 | 1.3.6.1.4.1.171.12.5.9.1.13 | ||
| The authentication protocol provided by the Server. | |||
| OBJECT-TYPE | |||
| INTEGER | tacacs(1), xtacacs(2), tacacs-plus(3), radius(4), none(5), other(6) | ||
| swAACServerGroupIPAddr7 | 1.3.6.1.4.1.171.12.5.9.1.14 | ||
| The IP address of Server | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| swAACServerGroupAuthProtocol7 | 1.3.6.1.4.1.171.12.5.9.1.15 | ||
| The authentication protocol provided by the Server. | |||
| OBJECT-TYPE | |||
| INTEGER | tacacs(1), xtacacs(2), tacacs-plus(3), radius(4), none(5), other(6) | ||
| swAACServerGroupIPAddr8 | 1.3.6.1.4.1.171.12.5.9.1.16 | ||
| The IP address of Server | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| swAACServerGroupAuthProtocol8 | 1.3.6.1.4.1.171.12.5.9.1.17 | ||
| The authentication protocol provided by the Server. | |||
| OBJECT-TYPE | |||
| INTEGER | tacacs(1), xtacacs(2), tacacs-plus(3), radius(4), none(5), other(6) | ||
| swAACServerGroupRowStatus | 1.3.6.1.4.1.171.12.5.9.1.18 | ||
| This object indicates the status of this entry. A set request with RowStatus 'CreateAndGo' will fail when the current entry in the table is equal to swAACMaxServerGroup. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| swAACServerInfoTable | 1.3.6.1.4.1.171.12.5.10 | ||
| A table that contains information about severs. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SwAACServerInfoEntry | |||
| swAACServerInfoEntry | 1.3.6.1.4.1.171.12.5.10.1 | ||
| A list of the information of server . | |||
| OBJECT-TYPE | |||
| SwAACServerInfoEntry | |||
| swAACServerIPAddr | 1.3.6.1.4.1.171.12.5.10.1.1 | ||
| The IP address of Server | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| swAACServerAuthProtocol | 1.3.6.1.4.1.171.12.5.10.1.2 | ||
| The authentication protocol provided by the Server. | |||
| OBJECT-TYPE | |||
| INTEGER | tacacs(1), xtacacs(2), tacacs-plus(3), radius(4) | ||
| swAACServerAuthPort | 1.3.6.1.4.1.171.12.5.10.1.3 | ||
| The TCP/IP port. The default authentication port is 49 and port numbers 5001 to 65535 are valid settings in the system , other values, except 49,5001-65535 will work when set in this object. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| swAACServerAuthKey | 1.3.6.1.4.1.171.12.5.10.1.4 | ||
| The key used during the authentication process .It is write-only. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..255) | ||
| swAACServerTimeout | 1.3.6.1.4.1.171.12.5.10.1.5 | ||
| Server response timeout . | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| swAACServerRetryCount | 1.3.6.1.4.1.171.12.5.10.1.6 | ||
| The client retry count . | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| swAACServerRowStatus | 1.3.6.1.4.1.171.12.5.10.1.7 | ||
| This object indicates the status of this entry. A set request with RowStatus 'CreateAndGo' will fail when the current entry in the table is equal to swAACMaxServer. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| swAACServerCtrlTable | 1.3.6.1.4.1.171.12.5.12 | ||
| A table that is used to add/delete a server from the group. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SwAACServerCtrlEntry | |||
| swAACServerCtrlEntry | 1.3.6.1.4.1.171.12.5.12.1 | ||
| A table that is used to add/delete a server from group. | |||
| OBJECT-TYPE | |||
| SwAACServerCtrlEntry | |||
| swAACCtrlServerGroupName | 1.3.6.1.4.1.171.12.5.12.1.1 | ||
| A human-readable text string of the method group. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..15) | ||
| swAACCtrlServerIPAddr | 1.3.6.1.4.1.171.12.5.12.1.2 | ||
| The IP address of the Server | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| swAACCtrlServerAuthProtocol | 1.3.6.1.4.1.171.12.5.12.1.3 | ||
| The authentication protocol provided by the Server. | |||
| OBJECT-TYPE | |||
| INTEGER | tacacs(1), xtacacs(2), tacacs-plus(3), radius(4) | ||
| swAACCtrlServerRowState | 1.3.6.1.4.1.171.12.5.12.1.4 | ||
| This object is used to add or delete an entry from swAACServerGroupTable. | |||
| OBJECT-TYPE | |||
| INTEGER | add(1), delete(2) | ||
| SwAACLoginMethodListEntry | |||
| SEQUENCE | |||
| DisplayString as swAACLoginMethodListName | |||
| INTEGER as swAACLoginMethod1Type | |||
| DisplayString as swAACLoginMethod1ServerGroup | |||
| INTEGER as swAACLoginMethod2Type | |||
| DisplayString as swAACLoginMethod2ServerGroup | |||
| INTEGER as swAACLoginMethod3Type | |||
| DisplayString as swAACLoginMethod3ServerGroup | |||
| INTEGER as swAACLoginMethod4Type | |||
| DisplayString as swAACLoginMethod4ServerGroup | |||
| RowStatus as swAACLoginMethodListRowStatus | |||
| SwAACEnableMethodListEntry | |||
| SEQUENCE | |||
| DisplayString as swAACEnableMethodListName | |||
| INTEGER as swAACEnableMethod1Type | |||
| DisplayString as swAACEnableMethod1ServerGroup | |||
| INTEGER as swAACEnableMethod2Type | |||
| DisplayString as swAACEnableMethod2ServerGroup | |||
| INTEGER as swAACEnableMethod3Type | |||
| DisplayString as swAACEnableMethod3ServerGroup | |||
| INTEGER as swAACEnableMethod4Type | |||
| DisplayString as swAACEnableMethod4ServerGroup | |||
| RowStatus as swAACEnableMethodListRowStatus | |||
| SwAACServerGroupEntry | |||
| SEQUENCE | |||
| DisplayString as swAACServerGroupName | |||
| IpAddress as swAACServerGroupIPAddr1 | |||
| INTEGER as swAACServerGroupAuthProtocol1 | |||
| IpAddress as swAACServerGroupIPAddr2 | |||
| INTEGER as swAACServerGroupAuthProtocol2 | |||
| IpAddress as swAACServerGroupIPAddr3 | |||
| INTEGER as swAACServerGroupAuthProtocol3 | |||
| IpAddress as swAACServerGroupIPAddr4 | |||
| INTEGER as swAACServerGroupAuthProtocol4 | |||
| IpAddress as swAACServerGroupIPAddr5 | |||
| INTEGER as swAACServerGroupAuthProtocol5 | |||
| IpAddress as swAACServerGroupIPAddr6 | |||
| INTEGER as swAACServerGroupAuthProtocol6 | |||
| IpAddress as swAACServerGroupIPAddr7 | |||
| INTEGER as swAACServerGroupAuthProtocol7 | |||
| IpAddress as swAACServerGroupIPAddr8 | |||
| INTEGER as swAACServerGroupAuthProtocol8 | |||
| RowStatus as swAACServerGroupRowStatus | |||
| SwAACServerInfoEntry | |||
| SEQUENCE | |||
| IpAddress as swAACServerIPAddr | |||
| INTEGER as swAACServerAuthProtocol | |||
| INTEGER as swAACServerAuthPort | |||
| DisplayString as swAACServerAuthKey | |||
| INTEGER as swAACServerTimeout | |||
| INTEGER as swAACServerRetryCount | |||
| RowStatus as swAACServerRowStatus | |||
| SwAACServerCtrlEntry | |||
| SEQUENCE | |||
| DisplayString as swAACCtrlServerGroupName | |||
| IpAddress as swAACCtrlServerIPAddr | |||
| INTEGER as swAACCtrlServerAuthProtocol | |||
| INTEGER as swAACCtrlServerRowState | |||