ACC-ATM

File: ACC-ATM.mib (17309 bytes)

Imported modules

RFC1155-SMI ACC-SYSTEM ACC-MIB

Imported symbols

OBJECT-TYPE Counter accTrapLogSeqNum
accBRG DisplayString RowStatus
IfIndex SmdsAddress

Defined Objects

accAtm 1.3.6.1.4.1.5.1.1.77
OBJECT IDENTIFIER    

atmStatsGrp 1.3.6.1.4.1.5.1.1.77.1
OBJECT IDENTIFIER    

atmStatsAtmLayerTable 1.3.6.1.4.1.5.1.1.77.1.1
The ATM Layer Statistics Table.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmStatsAtmLayerEntry

atmStatsAtmLayerEntry 1.3.6.1.4.1.5.1.1.77.1.1.1
An entry in the ATM Layer Statistics Table
OBJECT-TYPE    
  AtmStatsAtmLayerEntry  

atmStatsAtmLayerRxCells 1.3.6.1.4.1.5.1.1.77.1.1.1.1
Total number of received cells.
OBJECT-TYPE    
  Counter  

atmStatsAtmLayerTxCells 1.3.6.1.4.1.5.1.1.77.1.1.1.2
Total number of transmitted cells.
OBJECT-TYPE    
  Counter  

atmStatsAtmLayerDiscCells 1.3.6.1.4.1.5.1.1.77.1.1.1.3
Total number of discarded cells.
OBJECT-TYPE    
  Counter  

atmStatsAtmLayerDropCells 1.3.6.1.4.1.5.1.1.77.1.1.1.4
Total number of dropped cells.
OBJECT-TYPE    
  Counter  

atmStatsCallTable 1.3.6.1.4.1.5.1.1.77.1.2
The Call Statistics Table.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmStatsCallEntry

atmStatsCallEntry 1.3.6.1.4.1.5.1.1.77.1.2.1
An entry in the Call Statistics Table
OBJECT-TYPE    
  AtmStatsCallEntry  

atmStatsCallOrigCalls 1.3.6.1.4.1.5.1.1.77.1.2.1.1
Number of calls originated from this interface
OBJECT-TYPE    
  Counter  

atmStatsCallOffCalls 1.3.6.1.4.1.5.1.1.77.1.2.1.2
Number of calls offered to this interface.
OBJECT-TYPE    
  Counter  

atmStatsCallAccCalls 1.3.6.1.4.1.5.1.1.77.1.2.1.3
Number of calls accepted.
OBJECT-TYPE    
  Counter  

atmStatsCallCompCalls 1.3.6.1.4.1.5.1.1.77.1.2.1.4
Number of successfull/completed calls.
OBJECT-TYPE    
  Counter  

atmStatsCallClrCalls 1.3.6.1.4.1.5.1.1.77.1.2.1.5
Number of calls cleared.
OBJECT-TYPE    
  Counter  

atmOamGrp 1.3.6.1.4.1.5.1.1.77.5
OBJECT IDENTIFIER    

atmOamConfTable 1.3.6.1.4.1.5.1.1.77.5.1
The OAM configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmOamConfEntry

atmOamConfEntry 1.3.6.1.4.1.5.1.1.77.5.1.1
An entry in the OAM configuration table.
OBJECT-TYPE    
  AtmOamConfEntry  

atmOamIndex 1.3.6.1.4.1.5.1.1.77.5.1.1.1
Index into this table; must have same value as ifIndex.
OBJECT-TYPE    
  IfIndex  

atmOamPhyFlowType 1.3.6.1.4.1.5.1.1.77.5.1.1.2
The PHY level flows - f1, f2, or f3.
OBJECT-TYPE    
  INTEGER f1(1), f2(2), f3(3)  

atmOamFlowState 1.3.6.1.4.1.5.1.1.77.5.1.1.3
flow state on or off.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

atmOamVpcTable 1.3.6.1.4.1.5.1.1.77.5.2
The OAM VPC table.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmOamVpcEntry

atmOamVpcEntry 1.3.6.1.4.1.5.1.1.77.5.2.1
An entry in the OAM VPC Table.
OBJECT-TYPE    
  AtmOamVpcEntry  

atmOamVpcIndex 1.3.6.1.4.1.5.1.1.77.5.2.1.1
The index into the OAM VPC table. Must have same value as ifIndex.
OBJECT-TYPE    
  IfIndex  

atmOamVpcVpi 1.3.6.1.4.1.5.1.1.77.5.2.1.2
The VPI of the VPC.
OBJECT-TYPE    
  INTEGER 0..255  

atmOamVpcFlowType 1.3.6.1.4.1.5.1.1.77.5.2.1.3
The VPC flow type: end2end or segment.
OBJECT-TYPE    
  INTEGER end2end(1), segment(2)  

atmOamVpcRowStatus 1.3.6.1.4.1.5.1.1.77.5.2.1.4
Rowstatus for an entry.
OBJECT-TYPE    
  RowStatus  

atmOamVccTable 1.3.6.1.4.1.5.1.1.77.5.3
The OAM VCC table.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmOamVccEntry

atmOamVccEntry 1.3.6.1.4.1.5.1.1.77.5.3.1
An entry in the OAM VCC Table.
OBJECT-TYPE    
  AtmOamVccEntry  

atmOamVccIndex 1.3.6.1.4.1.5.1.1.77.5.3.1.1
The index into the OAM VCC table. Must have same value as ifIndex.
OBJECT-TYPE    
  IfIndex  

atmOamVccVpi 1.3.6.1.4.1.5.1.1.77.5.3.1.2
The VPI of the VCC.
OBJECT-TYPE    
  INTEGER 0..255  

atmOamVccVci 1.3.6.1.4.1.5.1.1.77.5.3.1.3
The VCI of the VCC.
OBJECT-TYPE    
  INTEGER 0..65535  

atmOamVccFlowType 1.3.6.1.4.1.5.1.1.77.5.3.1.4
The VCC flow type: end2end or segment.
OBJECT-TYPE    
  INTEGER end2end(1), segment(2)  

atmOamVccRowStatus 1.3.6.1.4.1.5.1.1.77.5.3.1.5
Rowstatus for an entry.
OBJECT-TYPE    
  RowStatus  

atmIlmiGrp 1.3.6.1.4.1.5.1.1.77.6
OBJECT IDENTIFIER    

atmIlmiConfTable 1.3.6.1.4.1.5.1.1.77.6.1
The Ilmi Configuration Table.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIlmiConfEntry

atmIlmiConfEntry 1.3.6.1.4.1.5.1.1.77.6.1.1
An entry in the Ilmi Configuration Table
OBJECT-TYPE    
  AtmIlmiConfEntry  

atmIlmiImeType 1.3.6.1.4.1.5.1.1.77.6.1.1.1
IME type: user/network/symmetric. In user mode, the ILMI will be configured to initiate the connection. In network mode, the ILMI listens for an ILMI connection. In symmetric mode, it decides on whether to act as network or user by talking to the peer. The default is user.
OBJECT-TYPE    
  INTEGER network(1), user(2), symmetric(3)  

atmIlmiUniType 1.3.6.1.4.1.5.1.1.77.6.1.1.2
The UNI type. This object maps to atmfAtmLayerUniType. If private, then autoconfiguration procedures may be used to automatically determine the interface type as described in the ILMI4.0 specification. Procedures for interface type determination for public devices is unspecified.
OBJECT-TYPE    
  INTEGER public(1), private(2)  

atmIlmiCommStrTable 1.3.6.1.4.1.5.1.1.77.6.2
The community string table for an interface.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIlmiCommStrEntry

atmIlmiCommStrEntry 1.3.6.1.4.1.5.1.1.77.6.2.1
An entry in the atmIlmiCommStrTable.
OBJECT-TYPE    
  AtmIlmiCommStrEntry  

atmIlmiCommStrIndex 1.3.6.1.4.1.5.1.1.77.6.2.1.1
ifIndex of an ATM interface to which a set of community strings is associated.
OBJECT-TYPE    
  IfIndex  

atmIlmiCommStr 1.3.6.1.4.1.5.1.1.77.6.2.1.2
A community string for an interface.
OBJECT-TYPE    
  OCTET STRING SIZE(0..255)  

atmIlmiCommStrStatus 1.3.6.1.4.1.5.1.1.77.6.2.1.3
Modification status of this entry; setting the status to add causes a new entry to be added. Setting it to delete causes an existing entry to be deleted.
OBJECT-TYPE    
  RowStatus  

atmInstGrp 1.3.6.1.4.1.5.1.1.77.9
OBJECT IDENTIFIER    

accAtmIfTable 1.3.6.1.4.1.5.1.1.77.9.1
Atm interface table, holds just the ifIndex to get around ifIndex not being specifically included in rfc1695. Any place that ifIndex (pertaining to ATM is desired), this object should be used.
OBJECT-TYPE    
  SEQUENCE OF  
    AccAtmIfEntry

accAtmIfEntry 1.3.6.1.4.1.5.1.1.77.9.1.1
An entry in the atm interface tbl. Holds just ifIndex.
OBJECT-TYPE    
  AccAtmIfEntry  

accAtmIfIndex 1.3.6.1.4.1.5.1.1.77.9.1.1.1
Ifindex for ATM interfaces. Must have the same value as the SNMP ifIndex object for this interface.
OBJECT-TYPE    
  IfIndex  

accAtmVplTable 1.3.6.1.4.1.5.1.1.77.9.2
The ACC atm vpl table; provides ifIndex and vpi to be used as instance ids.
OBJECT-TYPE    
  SEQUENCE OF  
    AccAtmVplEntry

accAtmVplEntry 1.3.6.1.4.1.5.1.1.77.9.2.1
An entry in the accAtmVplTable.
OBJECT-TYPE    
  AccAtmVplEntry  

accAtmVplIndex 1.3.6.1.4.1.5.1.1.77.9.2.1.1
IfIndex of the VPL table. Must have same value as the ifIndex object.
OBJECT-TYPE    
  IfIndex  

accAtmVplVpi 1.3.6.1.4.1.5.1.1.77.9.2.1.2
The VPI value of the VPL. Note that the VPI=0 is not used VPL not associated with a VCL. The maximum VPI value cannot exceed the value allowable by the atmInterfaceMaxVpiBits.
OBJECT-TYPE    
  INTEGER 1..4095  

accAtmVclTable 1.3.6.1.4.1.5.1.1.77.9.3
The ACC atm VCL table; provides ifIndex, vpi and vci to be used as instance ids.
OBJECT-TYPE    
  SEQUENCE OF  
    AccAtmVclEntry

accAtmVclEntry 1.3.6.1.4.1.5.1.1.77.9.3.1
An entry in the accAtmVclTable.
OBJECT-TYPE    
  AccAtmVclEntry  

accAtmVclIndex 1.3.6.1.4.1.5.1.1.77.9.3.1.1
IfIndex of the VCL table. Must have same value as the ifIndex object.
OBJECT-TYPE    
  IfIndex  

accAtmVclVpi 1.3.6.1.4.1.5.1.1.77.9.3.1.2
The VPI value of the VCL. The maximum VPI value cannot exceed the value allowable by the atmInterfaceMaxVpiBits.
OBJECT-TYPE    
  INTEGER 0..4095  

accAtmVclVci 1.3.6.1.4.1.5.1.1.77.9.3.1.3
The VCI value of the VCL. The maximum VCI value cannot exceed the value allowable by the atmInterfaceMaxVciBits.
OBJECT-TYPE    
  INTEGER 0..65535  

accAtmClockTable 1.3.6.1.4.1.5.1.1.77.9.4
The ACC atm CLOCK table; provides ifIndex and clockType to be used as instance ids.
OBJECT-TYPE    
  SEQUENCE OF  
    AccAtmClockEntry

accAtmClockEntry 1.3.6.1.4.1.5.1.1.77.9.4.1
An entry in the accAtmClockTable.
OBJECT-TYPE    
  AccAtmClockEntry  

accAtmClockIndex 1.3.6.1.4.1.5.1.1.77.9.4.1.1
IfIndex of the CLOCK table. Must have same value as the ifIndex object.
OBJECT-TYPE    
  IfIndex  

accAtmClockType 1.3.6.1.4.1.5.1.1.77.9.4.1.2
The clock type of the Interface. The clock type is either external or internal.
OBJECT-TYPE    
  INTEGER external(1), internal(2)  

Defined Objects

AtmStatsAtmLayerEntry  
SEQUENCE    
  Counter as atmStatsAtmLayerRxCells  
  Counter as atmStatsAtmLayerTxCells  
  Counter as atmStatsAtmLayerDiscCells  
  Counter as atmStatsAtmLayerDropCells  

AtmStatsCallEntry  
SEQUENCE    
  Counter as atmStatsCallOrigCalls  
  Counter as atmStatsCallOffCalls  
  Counter as atmStatsCallAccCalls  
  Counter as atmStatsCallCompCalls  
  Counter as atmStatsCallClrCalls  

AtmOamConfEntry  
SEQUENCE    
  IfIndex as atmOamIndex  
  INTEGER as atmOamPhyFlowType  
  INTEGER as atmOamFlowState  

AtmOamVpcEntry  
SEQUENCE    
  IfIndex as atmOamVpcIndex  
  INTEGER as atmOamVpcVpi  
  INTEGER as atmOamVpcFlowType  
  RowStatus as atmOamVpcRowStatus  

AtmOamVccEntry  
SEQUENCE    
  IfIndex as atmOamVccIndex  
  INTEGER as atmOamVccVpi  
  INTEGER as atmOamVccVci  
  INTEGER as atmOamVccFlowType  
  RowStatus as atmOamVccRowStatus  

AtmIlmiConfEntry  
SEQUENCE    
  INTEGER as atmIlmiImeType  
  INTEGER as atmIlmiUniType  

AtmIlmiCommStrEntry  
SEQUENCE    
  IfIndex as atmIlmiCommStrIndex  
  OCTET STRING as atmIlmiCommStr  
  RowStatus as atmIlmiCommStrStatus  

AccAtmIfEntry  
SEQUENCE    
  IfIndex as accAtmIfIndex  

AccAtmVplEntry  
SEQUENCE    
  IfIndex as accAtmVplIndex  
  INTEGER as accAtmVplVpi  

AccAtmVclEntry  
SEQUENCE    
  IfIndex as accAtmVclIndex  
  INTEGER as accAtmVclVpi  
  INTEGER as accAtmVclVci  

AccAtmClockEntry  
SEQUENCE    
  IfIndex as accAtmClockIndex  
  INTEGER as accAtmClockType