
| RFC1155-SMI | ACC-SYSTEM | ACC-MIB |
| OBJECT-TYPE | Counter | Gauge |
| accTrapLogSeqNum | accBRG | DisplayString |
| RowStatus | IfIndex | SmdsAddress |
| accCompress | 1.3.6.1.4.1.5.1.1.6 | ||
| OBJECT IDENTIFIER | |||
| accCompressDialNeighborTable | 1.3.6.1.4.1.5.1.1.6.1 | ||
| Data compression neighbor exception table for dial ports containing data compression parameters for selected neighbors. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AccCompressDialNeighborEntry | |||
| accCompressDialNeighborEntry | 1.3.6.1.4.1.5.1.1.6.1.1 | ||
| Data compression neighbor exception table entry containing data compression parameters for a particular dial port neighbor. | |||
| OBJECT-TYPE | |||
| AccCompressDialNeighborEntry | |||
| accCompressDialNeighborIfIndex | 1.3.6.1.4.1.5.1.1.6.1.1.1 | ||
| The ifindex of the dial port via which the neighbor is accessed or connected. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| accCompressDialNeighborCallAddress | 1.3.6.1.4.1.5.1.1.6.1.1.2 | ||
| The call address of the neighbor to which the dial port is accessed or connected. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| accCompressDialNeighborStatus | 1.3.6.1.4.1.5.1.1.6.1.1.3 | ||
| The administrative status of data compression for this dial neighbor. ON enables data compression and OFF disables it. Setting the status to INVALID permanently removes the entry from the table. | |||
| OBJECT-TYPE | |||
| INTEGER | on(1), off(2), invalid(128) | ||
| accCompressFfrNeighborTable | 1.3.6.1.4.1.5.1.1.6.2 | ||
| Data compression neighbor exception table for frame relay circuits containing data compression parameters for selected neighbors. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AccCompressFfrNeighborEntry | |||
| accCompressFfrNeighborEntry | 1.3.6.1.4.1.5.1.1.6.2.1 | ||
| Data compression neighbor exception table entry containing data compression parameters for a particular frame relay neighbor. | |||
| OBJECT-TYPE | |||
| AccCompressFfrNeighborEntry | |||
| accCompressFfrNeighborIfIndex | 1.3.6.1.4.1.5.1.1.6.2.1.1 | ||
| The physical port index via which the neighbor is accessed or connected. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| accCompressFfrNeighborDlci | 1.3.6.1.4.1.5.1.1.6.2.1.2 | ||
| A unique identifier for the neighbor. In this case it is the local DLCI. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| accCompressFfrNeighborStatus | 1.3.6.1.4.1.5.1.1.6.2.1.3 | ||
| The administrative status of data compression for this neighbor. ON enables data compression and OFF disables it. Setting the status to INVALID permanently removes the entry from the table. | |||
| OBJECT-TYPE | |||
| INTEGER | off(1), on(2), invalid(128) | ||
| accCompressX25NeighborTable | 1.3.6.1.4.1.5.1.1.6.3 | ||
| Data compression neighbor exception table for X25 circuits containing data compression parameters for selected neighbors. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AccCompressX25NeighborEntry | |||
| accCompressX25NeighborEntry | 1.3.6.1.4.1.5.1.1.6.3.1 | ||
| Data compression neighbor exception table entry containing data compression parameters for a particular X.25 neighbor. | |||
| OBJECT-TYPE | |||
| AccCompressX25NeighborEntry | |||
| accCompressX25NeighborIfIndex | 1.3.6.1.4.1.5.1.1.6.3.1.1 | ||
| The physical port index via which the neighbor is accessed or connected. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| accCompressX25NeighborAddress | 1.3.6.1.4.1.5.1.1.6.3.1.2 | ||
| A unique identifier for the neighbor. This is the neighbor's DTE address | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| accCompressX25NeighborStatus | 1.3.6.1.4.1.5.1.1.6.3.1.3 | ||
| The administrative status of data compression for this neighbor. ON enables data compression and OFF disables it. Setting the status to INVALID permanently removes the entry from the table. | |||
| OBJECT-TYPE | |||
| INTEGER | off(1), on(2), invalid(128) | ||
| accCompressDialStatTable | 1.3.6.1.4.1.5.1.1.6.4 | ||
| Data compression statistics table for dial ports containing data compression statistics for all active dial port neighbors. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AccCompressDialStatEntry | |||
| accCompressDialStatEntry | 1.3.6.1.4.1.5.1.1.6.4.1 | ||
| Data compression dial port statistics table entry containing data compression statistics for a particular dial port neighbor. | |||
| OBJECT-TYPE | |||
| AccCompressDialStatEntry | |||
| accCompressDialStatIfIndex | 1.3.6.1.4.1.5.1.1.6.4.1.1 | ||
| The interface index of the dial port via which the neighbor is accessed or connected. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| accCompressDialStatCallAddress | 1.3.6.1.4.1.5.1.1.6.4.1.2 | ||
| The call address of the neighbor to which the dial port is currently connected. | |||
| OBJECT-TYPE | |||
| OCTET STRING | |||
| accCompressDialStatStatus | 1.3.6.1.4.1.5.1.1.6.4.1.3 | ||
| The operational status of the neighbor. | |||
| OBJECT-TYPE | |||
| INTEGER | disc(1), conn(2), sync(3), resync(4) | ||
| accCompressDialStatOctetsIns | 1.3.6.1.4.1.5.1.1.6.4.1.4 | ||
| The total number of compressed octets presented for decompression. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressDialStatOctetsOuts | 1.3.6.1.4.1.5.1.1.6.4.1.5 | ||
| The total number of compressed octets generated after compression. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressDialStatPacketsIns | 1.3.6.1.4.1.5.1.1.6.4.1.6 | ||
| The total number of uncompressed packets generated by decompression. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressDialStatPacketsOuts | 1.3.6.1.4.1.5.1.1.6.4.1.7 | ||
| The total number of uncompressed packets presented for compression. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressDialStatUnCompIns | 1.3.6.1.4.1.5.1.1.6.4.1.8 | ||
| The total number of uncompressed packets presented for decompression (i.e., packets which could not be compressed and were therefore received in their uncompressed form). | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressDialStatUnCompOuts | 1.3.6.1.4.1.5.1.1.6.4.1.9 | ||
| The total number of uncompressed packets presented for compression which could not be compressed (i.e., the packet expanded). These packets are transmitted in their uncompressed form. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressDialStatAvgCompIn | 1.3.6.1.4.1.5.1.1.6.4.1.10 | ||
| The average compression rate of packets presented for decompression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only be achieved by compressing all packets to zero bits. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| accCompressDialStatAvgCompOut | 1.3.6.1.4.1.5.1.1.6.4.1.11 | ||
| The average compression rate of packets presented for compression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only be achieved by compressing all packets to zero bits. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| accCompressDialStatHdrErrors | 1.3.6.1.4.1.5.1.1.6.4.1.12 | ||
| The number of packets received with invalid compression headers. A header error requires a resynchronization of the history buffers at each end of the link. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressDialStatResyncs | 1.3.6.1.4.1.5.1.1.6.4.1.13 | ||
| The number of resynchronizations. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressDialStatNoEndMarks | 1.3.6.1.4.1.5.1.1.6.4.1.14 | ||
| The number of packets received with no end marker. Missing end markers require a resynchronization of the history buffers at each end of the link. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressDialStatNoBufAvails | 1.3.6.1.4.1.5.1.1.6.4.1.15 | ||
| The number of times the neighbor was connected and no history buffer could be allocated. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressFfrStatTable | 1.3.6.1.4.1.5.1.1.6.5 | ||
| Data compression statistics table containing data compression statistics for all active frame relay neighbors. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AccCompressFfrStatEntry | |||
| accCompressFfrStatEntry | 1.3.6.1.4.1.5.1.1.6.5.1 | ||
| Data compression statistics table entry containing data compression statistics for a particular frame relay neighbor. | |||
| OBJECT-TYPE | |||
| AccCompressFfrStatEntry | |||
| accCompressFfrStatIfIndex | 1.3.6.1.4.1.5.1.1.6.5.1.1 | ||
| The physical port index of the port via which the neighbor is accessed or connected. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| accCompressFfrStatDlci | 1.3.6.1.4.1.5.1.1.6.5.1.2 | ||
| This is the local DLCI for the frame relay neighbor. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| accCompressFfrStatStatus | 1.3.6.1.4.1.5.1.1.6.5.1.3 | ||
| The operational status of the neighbor. | |||
| OBJECT-TYPE | |||
| INTEGER | disc(1), conn(2), sync(3), resync(4) | ||
| accCompressFfrStatOctetsIns | 1.3.6.1.4.1.5.1.1.6.5.1.4 | ||
| The total number of compressed octets presented for decompression. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressFfrStatOctetsOuts | 1.3.6.1.4.1.5.1.1.6.5.1.5 | ||
| The total number of compressed octets generated after compression. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressFfrStatPacketsIns | 1.3.6.1.4.1.5.1.1.6.5.1.6 | ||
| The total number of uncompressed packets generated by decompression. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressFfrStatPacketsOuts | 1.3.6.1.4.1.5.1.1.6.5.1.7 | ||
| The total number of uncompressed packets presented for compression. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressFfrStatUnCompIns | 1.3.6.1.4.1.5.1.1.6.5.1.8 | ||
| The total number of uncompressed packets presented for decompression (i.e., packets which could not be compressed and were therefore received in their uncompressed form). | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressFfrStatUnCompOuts | 1.3.6.1.4.1.5.1.1.6.5.1.9 | ||
| The total number of uncompressed packets presented for compression which could not be compressed (i.e., the packet expanded). These packets are transmitted in their uncompressed form. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressFfrStatAvgCompIn | 1.3.6.1.4.1.5.1.1.6.5.1.10 | ||
| The average compression rate of packets presented for decompression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only be achieved by compressing all packets to zero bits. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| accCompressFfrStatAvgCompOut | 1.3.6.1.4.1.5.1.1.6.5.1.11 | ||
| The average compression rate of packets presented for compression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only be achieved by compressing all packets to zero bits. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| accCompressFfrStatHdrErrors | 1.3.6.1.4.1.5.1.1.6.5.1.12 | ||
| The number of packets received with invalid compression headers. A header error requires a resynchronization of the history buffers at each end of the link. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressFfrStatResyncs | 1.3.6.1.4.1.5.1.1.6.5.1.13 | ||
| The number of resynchronizations. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressFfrStatNoEndMarks | 1.3.6.1.4.1.5.1.1.6.5.1.14 | ||
| The number of packets received with no end marker. Missing end markers require a resynchronization of the history buffers at each end of the link. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressFfrStatNoBufAvails | 1.3.6.1.4.1.5.1.1.6.5.1.15 | ||
| The number of times the neighbor was connected and no history buffer could be allocated. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressX25StatTable | 1.3.6.1.4.1.5.1.1.6.6 | ||
| Data compression statistics table containing data compression statistics for all active X.25 neighbors. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AccCompressX25StatEntry | |||
| accCompressX25StatEntry | 1.3.6.1.4.1.5.1.1.6.6.1 | ||
| Data compression statistics table entry containing data compression statistics for a particular X.25 neighbor. | |||
| OBJECT-TYPE | |||
| AccCompressX25StatEntry | |||
| accCompressX25StatIfIndex | 1.3.6.1.4.1.5.1.1.6.6.1.1 | ||
| The physical port index of the port via which the neighbor is accessed or connected. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| accCompressX25StatAddress | 1.3.6.1.4.1.5.1.1.6.6.1.2 | ||
| DTE address for the X.25 neighbor. | |||
| OBJECT-TYPE | |||
| OCTET STRING | |||
| accCompressX25StatStatus | 1.3.6.1.4.1.5.1.1.6.6.1.3 | ||
| The operational status of the neighbor. | |||
| OBJECT-TYPE | |||
| INTEGER | disc(1), conn(2), sync(3), resync(4) | ||
| accCompressX25StatOctetsIns | 1.3.6.1.4.1.5.1.1.6.6.1.4 | ||
| The total number of compressed octets presented for decompression. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressX25StatOctetsOuts | 1.3.6.1.4.1.5.1.1.6.6.1.5 | ||
| The total number of compressed octets generated after compression. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressX25StatPacketsIns | 1.3.6.1.4.1.5.1.1.6.6.1.6 | ||
| The total number of uncompressed packets generated by decompression. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressX25StatPacketsOuts | 1.3.6.1.4.1.5.1.1.6.6.1.7 | ||
| The total number of uncompressed packets presented for compression. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressX25StatUnCompIns | 1.3.6.1.4.1.5.1.1.6.6.1.8 | ||
| The total number of uncompressed packets presented for decompression (i.e., packets which could not be compressed and were therefore received in their uncompressed form). | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressX25StatUnCompOuts | 1.3.6.1.4.1.5.1.1.6.6.1.9 | ||
| The total number of uncompressed packets presented for compression which could not be compressed (i.e., the packet expanded). These packets are transmitted in their uncompressed form. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressX25StatAvgCompIn | 1.3.6.1.4.1.5.1.1.6.6.1.10 | ||
| The average compression rate of packets presented for decompression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only be achieved by compressing all packets to zero bits. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| accCompressX25StatAvgCompOut | 1.3.6.1.4.1.5.1.1.6.6.1.11 | ||
| The average compression rate of packets presented for compression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only be achieved by compressing all packets to zero bits. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| accCompressX25StatHdrErrors | 1.3.6.1.4.1.5.1.1.6.6.1.12 | ||
| The number of packets received with invalid compression headers. A header error requires a resynchronization of the history buffers at each end of the link. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressX25StatResyncs | 1.3.6.1.4.1.5.1.1.6.6.1.13 | ||
| The number of resynchronizations. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressX25StatNoEndMarks | 1.3.6.1.4.1.5.1.1.6.6.1.14 | ||
| The number of packets received with no end marker. Missing end markers require a resynchronization of the history buffers at each end of the link. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressX25StatNoBufAvails | 1.3.6.1.4.1.5.1.1.6.6.1.15 | ||
| The number of times the neighbor was connected and no history buffer could be allocated. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressPhysStatTable | 1.3.6.1.4.1.5.1.1.6.7 | ||
| Data compression statistics table for physical ports containing aggregate data compression statistics for all active and inactive neighbors. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AccCompressPhysStatEntry | |||
| accCompressPhysStatEntry | 1.3.6.1.4.1.5.1.1.6.7.1 | ||
| Data compression statistics table entry containing aggregate data compression statistics for all neighbors through a particular physical port. | |||
| OBJECT-TYPE | |||
| AccCompressPhysStatEntry | |||
| accCompressPhysStatIfIndex | 1.3.6.1.4.1.5.1.1.6.7.1.1 | ||
| The index of the physical port via which the neighbor(s) is(are) accessed or connected. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| accCompressPhysStatStatus | 1.3.6.1.4.1.5.1.1.6.7.1.2 | ||
| The operational status of the neighbor. For X.25 and Frame Relay ports, as there can be more than one neighbor, this is the superior status. | |||
| OBJECT-TYPE | |||
| INTEGER | disc(1), conn(2), sync(3), resync(4) | ||
| accCompressPhysStatOctetsIns | 1.3.6.1.4.1.5.1.1.6.7.1.3 | ||
| The total number of compressed octets presented for decompression. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressPhysStatOctetsOuts | 1.3.6.1.4.1.5.1.1.6.7.1.4 | ||
| The total number of compressed octets generated after compression. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressPhysStatPacketsIns | 1.3.6.1.4.1.5.1.1.6.7.1.5 | ||
| The total number of uncompressed packets generated by decompression. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressPhysStatPacketsOuts | 1.3.6.1.4.1.5.1.1.6.7.1.6 | ||
| The total number of uncompressed packets presented for compression. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressPhysStatUnCompIns | 1.3.6.1.4.1.5.1.1.6.7.1.7 | ||
| The total number of uncompressed packets presented for decompression (i.e., packets which could not be compressed and were therefore received in their uncompressed form). | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressPhysStatUnCompOuts | 1.3.6.1.4.1.5.1.1.6.7.1.8 | ||
| The total number of uncompressed packets presented for compression which could not be compressed (i.e., the packet expanded). These packets are transmitted in their uncompressed form. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressPhysStatAvgCompIn | 1.3.6.1.4.1.5.1.1.6.7.1.9 | ||
| The average compression rate of packets presented for decompression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only be achieved by compressing all packets to zero bits. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| accCompressPhysStatAvgCompOut | 1.3.6.1.4.1.5.1.1.6.7.1.10 | ||
| The average compression rate of packets presented for compression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only be achieved by compressing all packets to zero bits. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| accCompressPhysStatHdrErrors | 1.3.6.1.4.1.5.1.1.6.7.1.11 | ||
| The number of packets received with invalid compression headers. A header error requires a resynchronization of the history buffers at each end of the link. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressPhysStatResyncs | 1.3.6.1.4.1.5.1.1.6.7.1.12 | ||
| The number of resynchronizations. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressPhysStatNoEndMarks | 1.3.6.1.4.1.5.1.1.6.7.1.13 | ||
| The number of packets received with no end marker. Missing end markers require a resynchronization of the history buffers at each end of the link. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressPhysStatNoBufAvails | 1.3.6.1.4.1.5.1.1.6.7.1.14 | ||
| The number of times the neighbor was connected and no history buffer could be allocated. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressPhysStatusInStats | 1.3.6.1.4.1.5.1.1.6.7.1.15 | ||
| The current status of the incoming packet port compression connection. | |||
| OBJECT-TYPE | |||
| INTEGER | disc(1), conn(2), sync(3), resync(4) | ||
| accCompressPhysStatusOutStats | 1.3.6.1.4.1.5.1.1.6.7.1.16 | ||
| The current status of the outgoing packet port compression connection. | |||
| OBJECT-TYPE | |||
| INTEGER | disc(1), conn(2), sync(3), resync(4) | ||
| accCompressPhysExpandInStats | 1.3.6.1.4.1.5.1.1.6.7.1.17 | ||
| The number of incoming packets that have been uncompressed. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressPhysExpandOutStats | 1.3.6.1.4.1.5.1.1.6.7.1.18 | ||
| The number of outgoing packets that have been uncompressed. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressPhysDiscardInStats | 1.3.6.1.4.1.5.1.1.6.7.1.19 | ||
| The number of incoming packets that have been discarded. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressPhysDiscardOutStats | 1.3.6.1.4.1.5.1.1.6.7.1.20 | ||
| The number outgoing packets that have been discarded. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressSmdsNeighborTable | 1.3.6.1.4.1.5.1.1.6.8 | ||
| Data compression neighbor table for Smds connections containing data compression parameters for selected neighbors. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AccCompressSmdsNeighborEntry | |||
| accCompressSmdsNeighborEntry | 1.3.6.1.4.1.5.1.1.6.8.1 | ||
| Data compression neighbor table entry containing data compression parameters for a particular Smds neighbor. | |||
| OBJECT-TYPE | |||
| AccCompressSmdsNeighborEntry | |||
| accCompressSmdsNeighborIfIndex | 1.3.6.1.4.1.5.1.1.6.8.1.1 | ||
| The physical port index via which the neighbor is accessed or connected. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| accCompressSmdsNeighborSNI | 1.3.6.1.4.1.5.1.1.6.8.1.2 | ||
| A unique identifier for the neighbor. In this case it is the remote SNI address. This is the unicast Subscriber Network Interface address of the remote side in E.164 address format (e.g., 0xC18005551212FFFF) | |||
| OBJECT-TYPE | |||
| SmdsAddress | |||
| accCompressSmdsNeighborStatus | 1.3.6.1.4.1.5.1.1.6.8.1.3 | ||
| The administrative status of data compression for this neighbor. ON enables data compression and OFF disables it. Setting the status to INVALID permanently removes the entry from the table. | |||
| OBJECT-TYPE | |||
| INTEGER | off(1), on(2), invalid(128) | ||
| accCompressSmdsNeighborRowStatus | 1.3.6.1.4.1.5.1.1.6.8.1.4 | ||
| The current status of this neighbor entry. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| accCompressSmdsStatTable | 1.3.6.1.4.1.5.1.1.6.9 | ||
| Data compression statistics table containing data compression statistics for all active Smds neighbors. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AccCompressSmdsStatEntry | |||
| accCompressSmdsStatEntry | 1.3.6.1.4.1.5.1.1.6.9.1 | ||
| Data compression statistics table entry containing data compression statistics for a particular Smds neighbor. | |||
| OBJECT-TYPE | |||
| AccCompressSmdsStatEntry | |||
| accCompressSmdsStatIfIndex | 1.3.6.1.4.1.5.1.1.6.9.1.1 | ||
| The physical port index of the port via which the neighbor is accessed or connected. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| accCompressSmdsStatSNI | 1.3.6.1.4.1.5.1.1.6.9.1.2 | ||
| A unique identifier for the neighbor. In this case it is the remote SNI address. This is the unicast Subscriber Network Interface address of the remote side in E.164 address format (e.g., 0xC18005551212FFFF) | |||
| OBJECT-TYPE | |||
| SmdsAddress | |||
| accCompressSmdsStatStatus | 1.3.6.1.4.1.5.1.1.6.9.1.3 | ||
| The operational status of the neighbor. | |||
| OBJECT-TYPE | |||
| INTEGER | disc(1), conn(2), sync(3), resync(4) | ||
| accCompressSmdsStatOctetsIns | 1.3.6.1.4.1.5.1.1.6.9.1.4 | ||
| The total number of compressed octets presented for decompression. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressSmdsStatOctetsOuts | 1.3.6.1.4.1.5.1.1.6.9.1.5 | ||
| The total number of compressed octets generated after compression. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressSmdsStatPacketsIns | 1.3.6.1.4.1.5.1.1.6.9.1.6 | ||
| The total number of uncompressed packets generated by decompression. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressSmdsStatPacketsOuts | 1.3.6.1.4.1.5.1.1.6.9.1.7 | ||
| The total number of uncompressed packets presented for compression. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressSmdsStatUnCompIns | 1.3.6.1.4.1.5.1.1.6.9.1.8 | ||
| The total number of uncompressed packets presented for decompression (i.e., packets which could not be compressed and were therefore received in their uncompressed form). | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressSmdsStatUnCompOuts | 1.3.6.1.4.1.5.1.1.6.9.1.9 | ||
| The total number of uncompressed packets presented for compression which could not be compressed (i.e., the packet expanded). These packets are transmitted in their uncompressed form. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressSmdsStatAvgCompIn | 1.3.6.1.4.1.5.1.1.6.9.1.10 | ||
| The average compression rate of packets presented for decompression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only be achieved by compressing all packets to zero bits. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| accCompressSmdsStatAvgCompOut | 1.3.6.1.4.1.5.1.1.6.9.1.11 | ||
| The average compression rate of packets presented for compression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only be achieved by compressing all packets to zero bits. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| accCompressSmdsStatHdrErrors | 1.3.6.1.4.1.5.1.1.6.9.1.12 | ||
| The number of packets received with invalid compression headers. A header error requires a resynchronization of the history buffers at each end of the link. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressSmdsStatResyncs | 1.3.6.1.4.1.5.1.1.6.9.1.13 | ||
| The number of resynchronizations. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressSmdsStatNoEndMarks | 1.3.6.1.4.1.5.1.1.6.9.1.14 | ||
| The number of packets received with no end marker. Missing end markers require a resynchronization of the history buffers at each end of the link. | |||
| OBJECT-TYPE | |||
| Counter | |||
| accCompressSmdsStatNoBufAvails | 1.3.6.1.4.1.5.1.1.6.9.1.15 | ||
| The number of times the neighbor was connected and no history buffer could be allocated. | |||
| OBJECT-TYPE | |||
| Counter | |||
| AccCompressDialNeighborEntry | |||
| SEQUENCE | |||
| INTEGER as accCompressDialNeighborIfIndex | |||
| DisplayString as accCompressDialNeighborCallAddress | |||
| INTEGER as accCompressDialNeighborStatus | |||
| AccCompressFfrNeighborEntry | |||
| SEQUENCE | |||
| INTEGER as accCompressFfrNeighborIfIndex | |||
| INTEGER as accCompressFfrNeighborDlci | |||
| INTEGER as accCompressFfrNeighborStatus | |||
| AccCompressX25NeighborEntry | |||
| SEQUENCE | |||
| INTEGER as accCompressX25NeighborIfIndex | |||
| DisplayString as accCompressX25NeighborAddress | |||
| INTEGER as accCompressX25NeighborStatus | |||
| AccCompressDialStatEntry | |||
| SEQUENCE | |||
| INTEGER as accCompressDialStatIfIndex | |||
| OCTET STRING as accCompressDialStatCallAddress | |||
| INTEGER as accCompressDialStatStatus | |||
| Counter as accCompressDialStatOctetsIns | |||
| Counter as accCompressDialStatOctetsOuts | |||
| Counter as accCompressDialStatPacketsIns | |||
| Counter as accCompressDialStatPacketsOuts | |||
| Counter as accCompressDialStatUnCompIns | |||
| Counter as accCompressDialStatUnCompOuts | |||
| Gauge as accCompressDialStatAvgCompIn | |||
| Gauge as accCompressDialStatAvgCompOut | |||
| Counter as accCompressDialStatHdrErrors | |||
| Counter as accCompressDialStatResyncs | |||
| Counter as accCompressDialStatNoEndMarks | |||
| Counter as accCompressDialStatNoBufAvails | |||
| AccCompressFfrStatEntry | |||
| SEQUENCE | |||
| INTEGER as accCompressFfrStatIfIndex | |||
| INTEGER as accCompressFfrStatDlci | |||
| INTEGER as accCompressFfrStatStatus | |||
| Counter as accCompressFfrStatOctetsIns | |||
| Counter as accCompressFfrStatOctetsOuts | |||
| Counter as accCompressFfrStatPacketsIns | |||
| Counter as accCompressFfrStatPacketsOuts | |||
| Counter as accCompressFfrStatUnCompIns | |||
| Counter as accCompressFfrStatUnCompOuts | |||
| Gauge as accCompressFfrStatAvgCompIn | |||
| Gauge as accCompressFfrStatAvgCompOut | |||
| Counter as accCompressFfrStatHdrErrors | |||
| Counter as accCompressFfrStatResyncs | |||
| Counter as accCompressFfrStatNoEndMarks | |||
| Counter as accCompressFfrStatNoBufAvails | |||
| AccCompressX25StatEntry | |||
| SEQUENCE | |||
| INTEGER as accCompressX25StatIfIndex | |||
| OCTET STRING as accCompressX25StatAddress | |||
| INTEGER as accCompressX25StatStatus | |||
| Counter as accCompressX25StatOctetsIns | |||
| Counter as accCompressX25StatOctetsOuts | |||
| Counter as accCompressX25StatPacketsIns | |||
| Counter as accCompressX25StatPacketsOuts | |||
| Counter as accCompressX25StatUnCompIns | |||
| Counter as accCompressX25StatUnCompOuts | |||
| Gauge as accCompressX25StatAvgCompIn | |||
| Gauge as accCompressX25StatAvgCompOut | |||
| Counter as accCompressX25StatHdrErrors | |||
| Counter as accCompressX25StatResyncs | |||
| Counter as accCompressX25StatNoEndMarks | |||
| Counter as accCompressX25StatNoBufAvails | |||
| AccCompressPhysStatEntry | |||
| SEQUENCE | |||
| INTEGER as accCompressPhysStatIfIndex | |||
| INTEGER as accCompressPhysStatStatus | |||
| Counter as accCompressPhysStatOctetsIns | |||
| Counter as accCompressPhysStatOctetsOuts | |||
| Counter as accCompressPhysStatPacketsIns | |||
| Counter as accCompressPhysStatPacketsOuts | |||
| Counter as accCompressPhysStatUnCompIns | |||
| Counter as accCompressPhysStatUnCompOuts | |||
| Gauge as accCompressPhysStatAvgCompIn | |||
| Gauge as accCompressPhysStatAvgCompOut | |||
| Counter as accCompressPhysStatHdrErrors | |||
| Counter as accCompressPhysStatResyncs | |||
| Counter as accCompressPhysStatNoEndMarks | |||
| Counter as accCompressPhysStatNoBufAvails | |||
| INTEGER as accCompressPhysStatusInStats | |||
| INTEGER as accCompressPhysStatusOutStats | |||
| Counter as accCompressPhysExpandInStats | |||
| Counter as accCompressPhysExpandOutStats | |||
| Counter as accCompressPhysDiscardInStats | |||
| Counter as accCompressPhysDiscardOutStats | |||
| AccCompressSmdsNeighborEntry | |||
| SEQUENCE | |||
| INTEGER as accCompressSmdsNeighborIfIndex | |||
| SmdsAddress as accCompressSmdsNeighborSNI | |||
| INTEGER as accCompressSmdsNeighborStatus | |||
| RowStatus as accCompressSmdsNeighborRowStatus | |||
| AccCompressSmdsStatEntry | |||
| SEQUENCE | |||
| INTEGER as accCompressSmdsStatIfIndex | |||
| SmdsAddress as accCompressSmdsStatSNI | |||
| INTEGER as accCompressSmdsStatStatus | |||
| Counter as accCompressSmdsStatOctetsIns | |||
| Counter as accCompressSmdsStatOctetsOuts | |||
| Counter as accCompressSmdsStatPacketsIns | |||
| Counter as accCompressSmdsStatPacketsOuts | |||
| Counter as accCompressSmdsStatUnCompIns | |||
| Counter as accCompressSmdsStatUnCompOuts | |||
| Gauge as accCompressSmdsStatAvgCompIn | |||
| Gauge as accCompressSmdsStatAvgCompOut | |||
| Counter as accCompressSmdsStatHdrErrors | |||
| Counter as accCompressSmdsStatResyncs | |||
| Counter as accCompressSmdsStatNoEndMarks | |||
| Counter as accCompressSmdsStatNoBufAvails | |||