
ACC-MSP
File:
ACC-MSP.mib (16165 bytes)
Imported modules
Imported symbols
Defined Objects
| accMsp |
1.3.6.1.4.1.5.1.1.76 |
| OBJECT IDENTIFIER |
|
|
|
| accMspMode |
1.3.6.1.4.1.5.1.1.76.1.2 |
| MSP Mode : WAIT means that MSP requires its neighbors to respond only if they want the call. ACKNOWLEDGE causes all the MSP neighbors to respond to every request |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
wait(1), acknowledge(2) |
|
| accMspDelivery |
1.3.6.1.4.1.5.1.1.76.1.3 |
| Sets the delivery mechanism for MSP packets. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
multicast(1), limited-broadcast(2) |
|
| accMspGroupId |
1.3.6.1.4.1.5.1.1.76.1.4 |
| MSP Group Identifier, should be the same value on all MSP NASs. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..16777216 |
|
| accMspUdpPort |
1.3.6.1.4.1.5.1.1.76.1.6 |
| Changes the default UDP port number that MSP uses when sending and listening for MSP packets. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| accMspMaximumTimeout |
1.3.6.1.4.1.5.1.1.76.1.7 |
| Maximum amount of time MSP will wait for an MSP neighbor to respond to a request. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
50..100000 |
|
| accMspMaximumRetransmissions |
1.3.6.1.4.1.5.1.1.76.1.8 |
| Used to configure the maximum number of retransmissions that MSP will send to an MSP neighbor before designating the neighbors as 'non-responding'. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..10 |
|
| accMspMaximumHistorySize |
1.3.6.1.4.1.5.1.1.76.1.9 |
| Used to configure the maximum history buffer size. Must be in powers of 2. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..256 |
|
| accMspDebugMask |
1.3.6.1.4.1.5.1.1.76.1.11 |
| Used to selectively enable and disable MSP trap messages used for debugging. The debug messages are different from regular traps. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..255 |
|
| accMspStatOutQueries |
1.3.6.1.4.1.5.1.1.76.1.15 |
| Indicates the number of MSP Query requests that have been sent by this RAC. A MSP Query request is sent for each new Multilink call that the RAC receives. |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| accMspStatInDiscards |
1.3.6.1.4.1.5.1.1.76.1.20 |
| Indicates the number of times the local MSP protocol has discarded MSP packets.This counter increases if MSP receives a MSP packet that is not a member of its group. This counter will also increase whenever a MSP packet fails to be processed. |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| accMspStatProcessingErrors |
1.3.6.1.4.1.5.1.1.76.1.21 |
| Indicates the number of times the MSP protocol has failed to process a MSP packet. Failures arise from conditions where the packet could not be correctly processed, possibly because of resource limitations. |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| accMspStatInQueryPiggys |
1.3.6.1.4.1.5.1.1.76.1.24 |
| Along with Out Query Piggy, In Ack Piggy, and Out Ack Piggy indicates how well MSP is operating. As MSP activity increases, the MSP protocol is designed to piggyback Query Requests and Query Acknowledgments in the same response packet to optimize network traffic and to address scaling issues. |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| accMspStatOutQueryPiggys |
1.3.6.1.4.1.5.1.1.76.1.25 |
| Along with Out Query Piggy, In Ack Piggy, and Out Ack Piggy indicates how well MSP is operating. As MSP activity increases, the MSP protocol is designed to piggyback Query Requests and Query Acknowledgments in the same response packet to optimize network traffic and to address scaling issues. |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| accMspStatInAckPiggys |
1.3.6.1.4.1.5.1.1.76.1.26 |
| Along with Out Query Piggy, In Ack Piggy, and Out Ack Piggy indicates how well MSP is operating. As MSP activity increases, the MSP protocol is designed to piggyback Query Requests and Query Acknowledgments in the same response packet to optimize network traffic and to address scaling issues. |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| accMspStatOutAckPiggys |
1.3.6.1.4.1.5.1.1.76.1.27 |
| Along with Out Query Piggy, In Ack Piggy, and Out Ack Piggy indicates how well MSP is operating. As MSP activity increases, the MSP protocol is designed to piggyback Query Requests and Query Acknowledgments in the same response packet to optimize network traffic and to address scaling issues. |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| accMspStatQueryTimeouts |
1.3.6.1.4.1.5.1.1.76.1.28 |
| Indicates the number of times the local MSP protocol entity has timed out while waiting for a query response. This is normal in TIMEOUT mode of operation. However, if an excessive number of timeouts are indicated in ACKNOWLEDGE mode, there may be a problem with a particular RAC or excessive network traffic may be resulting in lost packets. |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| accMspStatAverageQueryClosure |
1.3.6.1.4.1.5.1.1.76.1.30 |
| Indicates the average time to close a MSP Query Request. When in TIMEOUT mode, this value coincides with the configured maximum timeout parameter value. The default value for this parameter is 100 ms. In ACKNOWLEDGE mode, this value varies and usually is a good indicator of MSP responsiveness. A 'good' response time would be less than the configured timeout interval. |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| accMspStatCurrentTimeout |
1.3.6.1.4.1.5.1.1.76.1.31 |
| indicates the current timeout value being used. In TIMEOUT mode, this will always be the maximum timeout value. In ACKNOWLEDGE mode, this value varies, but in steady state, it should be close to the Average Closure interval. If it is not, and this value continues to vary, it may indicate MSP activity problems such as high packet loss due to network congestion. |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| accMspShutdownTrap |
1.3.6.1.4.1.5.1.1.76.3.3 |
| While creating a MSP neighbor, if the allocation to that fails due to allocc failure, then this is REAL bad situation as this could break the hello protocol. MSP has to be SHUTDOWN SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accMspTrapMsg } PCAUSE-DEFAULT: 32 |
| TRAP-TYPE |
|
|
|
| |
accMspTrapMsg |
|
|
| |
accMspNeighborAddress |
|
|
| |
accTrapLogSeqNum |
|
|
Defined Objects
| AccMspNeighborEntry |
|
| SEQUENCE |
|
|
|
| |
IpAddress as accMspNeighborAddress |
|
|
| |
Counter as accMspNeighborIDs |
|
|
| |
Counter as accMspNeighborVersions |
|
|
| |
Counter as accMspNeighborStates |
|
|
| |
Counter as accMspNeighborAckTimeOuts |
|
|
| |
Counter as accMspNeighborRetransmissions |
|
|