ACC-PSTN

File: ACC-PSTN.mib (73407 bytes)

Imported modules

RFC1155-SMI RFC-1215 RFC1213-MIB
ACC-SYSTEM ACC-MIB

Imported symbols

OBJECT-TYPE IpAddress TimeTicks
Gauge Counter TRAP-TYPE
ifIndex accTrapLogSeqNum accBRG
DisplayString

Defined Objects

accPstn 1.3.6.1.4.1.5.1.1.69
OBJECT IDENTIFIER    

accPstnSubTable 1.3.6.1.4.1.5.1.1.69.1
Table of PSTN subscriber entry parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    AccPstnSubTabEntry

accPstnSubTabEntry 1.3.6.1.4.1.5.1.1.69.1.1
PSTN subscriber entry-table parameters.
OBJECT-TYPE    
  AccPstnSubTabEntry  

oPstnSubTabDslIndex 1.3.6.1.4.1.5.1.1.69.1.1.1
PSTN Subscriber Table Index.
OBJECT-TYPE    
  INTEGER  

oPstnSubTabSigSystem 1.3.6.1.4.1.5.1.1.69.1.1.2
PSTN signaling system. Either RBS, P7 or R2.
OBJECT-TYPE    
  INTEGER rbs(1), p7(2), r2(3)  

oPstnSubTabNumChannels 1.3.6.1.4.1.5.1.1.69.1.1.3
PSTN subscriber table - number of channels.
OBJECT-TYPE    
  INTEGER  

oPstnSubTabAdminStatus 1.3.6.1.4.1.5.1.1.69.1.1.4
Administration status of PSTN.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), drained(3)  

oPstnSubTabOperStatus 1.3.6.1.4.1.5.1.1.69.1.1.5
Operational status of PSTN.
OBJECT-TYPE    
  INTEGER offline(1), regpend(2), unrpend(3), cfgpend(4), starting(5), stopping(6), online(7)  

oPstnSubTabMsgLevel 1.3.6.1.4.1.5.1.1.69.1.1.6
PSTN Message level.
OBJECT-TYPE    
  INTEGER  

oPstnSubTabLastCause 1.3.6.1.4.1.5.1.1.69.1.1.7
PSTN subscriber table - last cause.
OBJECT-TYPE    
  INTEGER no-error(0), unassigned-number(1), no-route-to-transit-network(2), no-route-to-destination(3), channel-unacceptable(6), call-awarded-being-delivered(7), normal-call-clearing(16), user-busy(17), no-user-responding(18), user-alerted-no-answer(19), call-rejected(21), number-changed(22), non-selected-user-clearing(26), destination-out-of-order(27), invalid-number-format(28), facility-rejected(29), response-to-status-enquiry(30), normal-clearing-unspecified(31), no-circuit-or-channel-available(34), network-out-of-order(38), temporary-failure(41), network-congestion(42), access-information-discarded(43), requested-channel-not-available(44), ciruit-or-channel-preempted(45), resources-unavailable(47), quality-of-service-unavailable(49), facility-not-subscribed(50), outgoing-call-barred(52), incoming-call-barred(54), bearer-capability-not-authorized(57), bearer-capability-not-available(58), service-not-available(63), bearer-capability-not-implemented(65), channel-not-implemented(66), facility-not-implemented(69), restricted-digital-information-only(70), service-not-implemented(79), invalid-call-reference(81), channel-does-not-exist(82), call-identity-non-existent(83), call-identity-in-use(84), no-call-suspended(85), suspended-call-cleared(86), incompatible-destination(88), invalid-transit-network(91), invalid-message-unspecified(95), manditory-information-element-missing(96), message-nonexistent-or-not-implemented(97), incompatible-or-nonexistent-message(98), information-element-not-implemented(99), invalid-information-element-contents(100), message-incompatible-with-call-state(101), timer-expiration(102), information-element-length-error(103), protocol-error-unspecified(111), interworking-unspecified(127)  

oPstnSubTabNumberGroup 1.3.6.1.4.1.5.1.1.69.1.1.8
PSTN Subscriber table - number group.
OBJECT-TYPE    
  INTEGER  

accPstnStatTable 1.3.6.1.4.1.5.1.1.69.2
A table containing PSTN statistics.
OBJECT-TYPE    
  SEQUENCE OF  
    AccPstnStatEntry

accPstnStatEntry 1.3.6.1.4.1.5.1.1.69.2.1
Management information PSTN statistics.
OBJECT-TYPE    
  AccPstnStatEntry  

oPstnStatDslIndex 1.3.6.1.4.1.5.1.1.69.2.1.1
PSTN Statistics Dsl Index.
OBJECT-TYPE    
  INTEGER  

oPstnStatCallsOriginated 1.3.6.1.4.1.5.1.1.69.2.1.2
PSTN Statistics - Calls Originated.
OBJECT-TYPE    
  Counter  

oPstnStatCallsOfferred 1.3.6.1.4.1.5.1.1.69.2.1.3
PSTN Statistics - Calls Offered.
OBJECT-TYPE    
  Counter  

oPstnStatCallsRouted 1.3.6.1.4.1.5.1.1.69.2.1.4
PSTN Statistics - Calls Routed.
OBJECT-TYPE    
  Counter  

oPstnStatCallsAccepted 1.3.6.1.4.1.5.1.1.69.2.1.5
PSTN Statistics - Calls Accepted.
OBJECT-TYPE    
  Counter  

oPstnStatCallsCompleted 1.3.6.1.4.1.5.1.1.69.2.1.6
PSTN Statistics - Calls Completed.
OBJECT-TYPE    
  Counter  

oPstnStatCallsCleared 1.3.6.1.4.1.5.1.1.69.2.1.7
PSTN Statistics - Calls Cleared.
OBJECT-TYPE    
  Counter  

accPstnCallTable 1.3.6.1.4.1.5.1.1.69.3
A list of PSTN call entries.
OBJECT-TYPE    
  SEQUENCE OF  
    AccPstnCallTableEntry

accPstnCallTableEntry 1.3.6.1.4.1.5.1.1.69.3.1
A table entry providing information about a specific call.
OBJECT-TYPE    
  AccPstnCallTableEntry  

oPstnCallTabDslIndex 1.3.6.1.4.1.5.1.1.69.3.1.1
PSTN Call Table Dsl Index.
OBJECT-TYPE    
  INTEGER  

oPstnCallTabCallId 1.3.6.1.4.1.5.1.1.69.3.1.2
PSTN Call Table Call ID.
OBJECT-TYPE    
  INTEGER  

oPstnCallTabOrigin 1.3.6.1.4.1.5.1.1.69.3.1.3
PSTN Call Table Origin.
OBJECT-TYPE    
  INTEGER none(1), incoming(2), outgoing(3)  

oPstnCallTabChannel 1.3.6.1.4.1.5.1.1.69.3.1.4
PSTN Call Table Channel.
OBJECT-TYPE    
  INTEGER  

oPstnCallTabEndpoint 1.3.6.1.4.1.5.1.1.69.3.1.5
PSTN Call Table Endpoint.
OBJECT-TYPE    
  INTEGER  

oPstnCallTabState 1.3.6.1.4.1.5.1.1.69.3.1.6
PSTN Call Table State.
OBJECT-TYPE    
  INTEGER idle(1), offered(2), initiated(3), sending(4), proceeding(5), connected(6), releasing(7), clearing(8), routing(9), ringing(10), delivered(11), answered(12), receiving(13), busy(14)  

oPstnCallTabCause 1.3.6.1.4.1.5.1.1.69.3.1.7
PSTN Call Table State.
OBJECT-TYPE    
  INTEGER no-error(0), unassigned-number(1), no-route-to-transit-network(2), no-route-to-destination(3), channel-unacceptable(6), call-awarded-being-delivered(7), normal-call-clearing(16), user-busy(17), no-user-responding(18), user-alerted-no-answer(19), call-rejected(21), number-changed(22), non-selected-user-clearing(26), destination-out-of-order(27), invalid-number-format(28), facility-rejected(29), response-to-status-enquiry(30), normal-clearing-unspecified(31), no-circuit-or-channel-available(34), network-out-of-order(38), temporary-failure(41), network-congestion(42), access-information-discarded(43), requested-channel-not-available(44), ciruit-or-channel-preempted(45), resources-unavailable(47), quality-of-service-unavailable(49), facility-not-subscribed(50), outgoing-call-barred(52), incoming-call-barred(54), bearer-capability-not-authorized(57), bearer-capability-not-available(58), service-not-available(63), bearer-capability-not-implemented(65), channel-not-implemented(66), facility-not-implemented(69), restricted-digital-information-only(70), service-not-implemented(79), invalid-call-reference(81), channel-does-not-exist(82), call-identity-non-existent(83), call-identity-in-use(84), no-call-suspended(85), suspended-call-cleared(86), incompatible-destination(88), invalid-transit-network(91), invalid-message-unspecified(95), manditory-information-element-missing(96), message-nonexistent-or-not-implemented(97), incompatible-or-nonexistent-message(98), information-element-not-implemented(99), invalid-information-element-contents(100), message-incompatible-with-call-state(101), timer-expiration(102), information-element-length-error(103), protocol-error-unspecified(111), interworking-unspecified(127)  

oPstnCallTabAddress 1.3.6.1.4.1.5.1.1.69.3.1.8
PSTN Call Table Address.
OBJECT-TYPE    
  INTEGER  

oPstnCallTabInfoRate 1.3.6.1.4.1.5.1.1.69.3.1.9
PSTN Call Table Info Rate.
OBJECT-TYPE    
  INTEGER  

oPstnCallTabInfoType 1.3.6.1.4.1.5.1.1.69.3.1.10
PSTN Call Table Info Type.
OBJECT-TYPE    
  INTEGER cmd(1), cm56(2), cmv(3), cma(4), voice(5), data(6), data56(7), audio(8), udi(9), rdi(10)  

oPstnCallTabDuration 1.3.6.1.4.1.5.1.1.69.3.1.11
PSTN Call Table Duration.
OBJECT-TYPE    
  INTEGER  

accPstnChanTable 1.3.6.1.4.1.5.1.1.69.4
Table of PSTN channel parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    AccPstnChanTableEntry

accPstnChanTableEntry 1.3.6.1.4.1.5.1.1.69.4.1
Entry of PSTN channel parameter table.
OBJECT-TYPE    
  AccPstnChanTableEntry  

oPstnChanTabDslIndex 1.3.6.1.4.1.5.1.1.69.4.1.1
PSTN Channel Table Dsl Index.
OBJECT-TYPE    
  INTEGER  

oPstnChanTabChannel 1.3.6.1.4.1.5.1.1.69.4.1.2
PSTN Channel Table Channel.
OBJECT-TYPE    
  INTEGER  

oPstnChanTabServState 1.3.6.1.4.1.5.1.1.69.4.1.3
PSTN Channel Table Service State.
OBJECT-TYPE    
  INTEGER in-service(1), maintenance(2), out-service(3)  

oPstnChanTabChanState 1.3.6.1.4.1.5.1.1.69.4.1.4
PSTN Channel Table Channel State.
OBJECT-TYPE    
  INTEGER idle(1), proposed(2), awarded(3), busy(4), restart(5), cnfgpend(6), cnfgerr(7), reserved(8)  

oPstnChanTabSlotMap 1.3.6.1.4.1.5.1.1.69.4.1.5
PSTN Channel Table Slot Map.
OBJECT-TYPE    
  INTEGER  

accPstnRBSParamTable 1.3.6.1.4.1.5.1.1.69.5
A table containing RBS parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    AccPstnRBSParamTableEntry

accPstnRBSParamTableEntry 1.3.6.1.4.1.5.1.1.69.5.1
An RBS parameter-table entry.
OBJECT-TYPE    
  AccPstnRBSParamTableEntry  

oPstnRbsTabDslIndex 1.3.6.1.4.1.5.1.1.69.5.1.1
PSTN RBS Table Dsl Index.
OBJECT-TYPE    
  INTEGER  

oPstnRbsTabSuprModeIn 1.3.6.1.4.1.5.1.1.69.5.1.2
PSTN RBS Line Supervision Mode - Incoming.
OBJECT-TYPE    
  INTEGER none(1), immediate(2), wink(3), ddsd(4)  

oPstnRbsTabSuprModeOut 1.3.6.1.4.1.5.1.1.69.5.1.3
PSTN RBS Line Supervision Mode - Outgoing.
OBJECT-TYPE    
  INTEGER none(1), immediate(2), wink(3), ddsd(4)  

oPstnRbsTabRegnModeIn 1.3.6.1.4.1.5.1.1.69.5.1.4
PSTN RBS Table Register Signaling Mode - Incoming.
OBJECT-TYPE    
  INTEGER suppress(1), pulse(2), mf(3), dtmf(4)  

oPstnRbsTabRegnModeOut 1.3.6.1.4.1.5.1.1.69.5.1.5
PSTN RBS Table Register Signaling Mode - Outgoing.
OBJECT-TYPE    
  INTEGER suppress(1), pulse(2), mf(3), dtmf(4)  

oPstnRbsTabPresModeIn 1.3.6.1.4.1.5.1.1.69.5.1.6
PSTN RBS Table Pres Mode - Incoming.
OBJECT-TYPE    
  INTEGER none(1), enbloc(2), overlap(3)  

oPstnRbsTabPresModeOut 1.3.6.1.4.1.5.1.1.69.5.1.7
PSTN RBS Table Pres Mode - outgoing.
OBJECT-TYPE    
  INTEGER none(1), enbloc(2), overlap(3)  

oPstnRbsTabGlareAction 1.3.6.1.4.1.5.1.1.69.5.1.8
PSTN RBS Table Glare Action.
OBJECT-TYPE    
  INTEGER backoff(1), proceed(2)  

oPstnRbsTabWoddDuration 1.3.6.1.4.1.5.1.1.69.5.1.9
PSTN RBS Table Wodd Duration.
OBJECT-TYPE    
  INTEGER  

oPstnRbsTabWsddDetect 1.3.6.1.4.1.5.1.1.69.5.1.10
PSTN RBS Table Wsdd Detect.
OBJECT-TYPE    
  INTEGER  

oPstnRbsTabWesdDetect 1.3.6.1.4.1.5.1.1.69.5.1.11
PSTN RBS Table Wesd Detect.
OBJECT-TYPE    
  INTEGER  

oPstnRbsTabEnblocDigits 1.3.6.1.4.1.5.1.1.69.5.1.12
PSTN RBS Table Enbloc Digits.
OBJECT-TYPE    
  INTEGER  

oPstnRbsTabEnblocTimeout 1.3.6.1.4.1.5.1.1.69.5.1.13
PSTN RBS Table Enbloc Timeout.
OBJECT-TYPE    
  INTEGER  

accPstnIntCasSupvParamTable 1.3.6.1.4.1.5.1.1.69.6
Table of PSTN line supervision parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    AccPstnIntCasSupvParamEntry

accPstnIntCasSupvParamEntry 1.3.6.1.4.1.5.1.1.69.6.1
PSTN line supervision parameter-table entry.
OBJECT-TYPE    
  AccPstnIntCasSupvParamEntry  

oPstnCasTabDslIndex 1.3.6.1.4.1.5.1.1.69.6.1.1
PSTN CAS Table Dsl Index.
OBJECT-TYPE    
  INTEGER  

oPstnCasTabSupvModeIn 1.3.6.1.4.1.5.1.1.69.6.1.2
PSTN CAS Table Line Supervision Mode - Incoming.
OBJECT-TYPE    
  INTEGER none(1), r2(2), p7(3)  

oPstnCasTabSupvModeOut 1.3.6.1.4.1.5.1.1.69.6.1.3
PSTN CAS Table Line Supervision Mode - Outgoing.
OBJECT-TYPE    
  INTEGER none(1), r2(2), p7(3)  

oPstnCasTabSupvMask 1.3.6.1.4.1.5.1.1.69.6.1.4
PSTN CAS Table Line Supervision Mask.
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

oPstnCasTabSupvIdlePatt 1.3.6.1.4.1.5.1.1.69.6.1.5
PSTN CAS Table Line Supervision Idle Pattern.
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

oPstnCasTabSupvIdleTime 1.3.6.1.4.1.5.1.1.69.6.1.6
PSTN CAS Table Line Supervision Idle Time.
OBJECT-TYPE    
  INTEGER  

oPstnCasTabSupvSeizePatt 1.3.6.1.4.1.5.1.1.69.6.1.7
PSTN CAS Table Line Supervision Seize Pattern.
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

oPstnCasTabSupvSeizeTime 1.3.6.1.4.1.5.1.1.69.6.1.8
PSTN CAS Table Line Supervision Seize Time.
OBJECT-TYPE    
  INTEGER  

oPstnCasTabSupvSeizeAckPatt 1.3.6.1.4.1.5.1.1.69.6.1.9
PSTN CAS Table Line Supervision Seize Ack Pattern.
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

oPstnCasTabSupvSeizeAckTime 1.3.6.1.4.1.5.1.1.69.6.1.10
PSTN CAS Table Line Supervision Seize Ack Time.
OBJECT-TYPE    
  INTEGER  

oPstnCasTabSupvAnswerPatt 1.3.6.1.4.1.5.1.1.69.6.1.11
PSTN CAS Table Line Supervision Answer Pattern.
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

oPstnCasTabSupvAnswerTime 1.3.6.1.4.1.5.1.1.69.6.1.12
PSTN CAS Table Line Supervision Answer Time.
OBJECT-TYPE    
  INTEGER  

oPstnCasTabSupvClrForwPatt 1.3.6.1.4.1.5.1.1.69.6.1.13
PSTN CAS Table Line Supervision Clear Forward Pattern.
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

oPstnCasTabSupvClrForwTime 1.3.6.1.4.1.5.1.1.69.6.1.14
PSTN CAS Table Line Supervision Clear Forward Time.
OBJECT-TYPE    
  INTEGER  

oPstnCasTabSupvClrBackPatt 1.3.6.1.4.1.5.1.1.69.6.1.15
PSTN CAS Table Line Supervision Clear Back Pattern.
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

oPstnCasTabSupvClrBackTime 1.3.6.1.4.1.5.1.1.69.6.1.16
PSTN CAS Table Line Supervision Clear Back Time.
OBJECT-TYPE    
  INTEGER  

oPstnCasTabSupvBlockPatt 1.3.6.1.4.1.5.1.1.69.6.1.17
PSTN CAS Table Line Supervision Block Pattern.
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

oPstnCasTabSupvBlockTime 1.3.6.1.4.1.5.1.1.69.6.1.18
PSTN CAS Table Line Supervision Block Time.
OBJECT-TYPE    
  INTEGER  

oPstnCasTabSupvMetPatt 1.3.6.1.4.1.5.1.1.69.6.1.19
PSTN CAS Table Line Supervision Metering Pattern.
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16), disabled(17)  

oPstnCasTabSupvMetTime 1.3.6.1.4.1.5.1.1.69.6.1.20
PSTN CAS Table Line Supervision Metering Time.
OBJECT-TYPE    
  INTEGER  

oPstnCasTabSupvMetDelay 1.3.6.1.4.1.5.1.1.69.6.1.21
PSTN CAS Table Line Supervision Metering Delay.
OBJECT-TYPE    
  INTEGER  

oPstnCasTabSupvMetOn 1.3.6.1.4.1.5.1.1.69.6.1.22
PSTN CAS Table Line Supervision Metering On.
OBJECT-TYPE    
  INTEGER  

oPstnCasTabSupvMetOff 1.3.6.1.4.1.5.1.1.69.6.1.23
PSTN CAS Table Line Supervision Metering Off.
OBJECT-TYPE    
  INTEGER  

oPstnCasTabSupvGlare 1.3.6.1.4.1.5.1.1.69.6.1.24
PSTN CAS Table Line Supervision Glare Behavior.
OBJECT-TYPE    
  INTEGER backoff(1), proceed(2)  

oPstnCasTabRegModeIn 1.3.6.1.4.1.5.1.1.69.6.1.25
PSTN CAS Table Register Signaling Mode - Incoming.
OBJECT-TYPE    
  INTEGER suppressed(1), r2-mf-x(2), p7-dtmf(3)  

oPstnCasTabRegModeOut 1.3.6.1.4.1.5.1.1.69.6.1.26
PSTN CAS Table Register Signaling Mode - Outgoing.
OBJECT-TYPE    
  INTEGER suppressed(1), r2-mf-x(2), p7-dtmf(3)  

oPstnCasTabRegComp1Tone 1.3.6.1.4.1.5.1.1.69.6.1.27
PSTN CAS Table Register Signaling Completion One Tone.
OBJECT-TYPE    
  INTEGER d1(1), d2(2), d3(3), d4(4), d5(5), d6(6), d7(7), d8(8), d9(9), d10(10), d11(11), d12(12), d13(13), d14(14), d15(15), none(16)  

oPstnCasTabRegComp1On 1.3.6.1.4.1.5.1.1.69.6.1.28
PSTN CAS Table Register Signaling Completion One Tone On Time.
OBJECT-TYPE    
  INTEGER  

oPstnCasTabRegComp1Off 1.3.6.1.4.1.5.1.1.69.6.1.29
PSTN CAS Table Register Signaling Completion One Tone Off Time.
OBJECT-TYPE    
  INTEGER  

oPstnCasTabRegComp2Tone 1.3.6.1.4.1.5.1.1.69.6.1.30
PSTN CAS Table Register Signaling Completion Two Tone.
OBJECT-TYPE    
  INTEGER d1(1), d2(2), d3(3), d4(4), d5(5), d6(6), d7(7), d8(8), d9(9), d10(10), d11(11), d12(12), d13(13), d14(14), d15(15), none(16)  

oPstnCasTabRegComp2On 1.3.6.1.4.1.5.1.1.69.6.1.31
PSTN CAS Table Register Signaling Completion Two Tone On Time.
OBJECT-TYPE    
  INTEGER  

oPstnCasTabRegComp2Off 1.3.6.1.4.1.5.1.1.69.6.1.32
PSTN CAS Table Register Signaling Completion Two Tone Off Time.
OBJECT-TYPE    
  INTEGER  

accDsprmTraps 1.3.6.1.4.1.5.1.1.69.7
OBJECT IDENTIFIER    

accDsprmTrapMsg 1.3.6.1.4.1.5.1.1.69.7.1
Trap message object for level-1 traps of DSPRM module
OBJECT-TYPE    
  DisplayString  

accDsprmRelnqshFailTrap 1.3.6.1.4.1.5.1.1.69.7.1
Indicates that Relinquish has failed. SEVERITY-DEFAULT: Indeterminate EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDsprmTrapMsg } PCAUSE-DEFAULT: 0
TRAP-TYPE    
  accDsprmTrapMsg  
  ifIndex  
  accTrapLogSeqNum  

accDsprmLdspNotInUseTrap 1.3.6.1.4.1.5.1.1.69.7.2
Indicates that send has failed becuse LDSP is not in use. SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDsprmTrapMsg } PCAUSE-DEFAULT: 110
TRAP-TYPE    
  accDsprmTrapMsg  
  ifIndex  
  accTrapLogSeqNum  

accDsprmCucbErrTrap 1.3.6.1.4.1.5.1.1.69.7.3
Indicates that send has failed becuse of CUCB error SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDsprmTrapMsg } PCAUSE-DEFAULT: 110
TRAP-TYPE    
  accDsprmTrapMsg  
  ifIndex  
  accTrapLogSeqNum  

accDsprmNoDataTrap 1.3.6.1.4.1.5.1.1.69.7.4
Indicates that send has failed becuse of no data SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDsprmTrapMsg } PCAUSE-DEFAULT: 110
TRAP-TYPE    
  accDsprmTrapMsg  
  ifIndex  
  accTrapLogSeqNum  

accDsprmMemAllocTrap 1.3.6.1.4.1.5.1.1.69.7.5
Indicates that memory allocation failed for the NCI SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDsprmTrapMsg } PCAUSE-DEFAULT: 32
TRAP-TYPE    
  accDsprmTrapMsg  
  ifIndex  
  accTrapLogSeqNum  

accDsprmInvMplTrap 1.3.6.1.4.1.5.1.1.69.7.6
Indicates that a packet has been received with an invalid MPL type SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDsprmTrapMsg } PCAUSE-DEFAULT: 5
TRAP-TYPE    
  accDsprmTrapMsg  
  accTrapLogSeqNum  

accNewLiberty 1.3.6.1.4.1.5.1.1.69.8
OBJECT IDENTIFIER    

accPstnTabSigGen 1.3.6.1.4.1.5.1.1.69.8.3
OBJECT IDENTIFIER    

accPstnTabSigTrace 1.3.6.1.4.1.5.1.1.69.8.3.1
Depth of the trace level displayed in the trap log.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigType 1.3.6.1.4.1.5.1.1.69.8.3.2
OBJECT IDENTIFIER    

accPstnTabSigInType 1.3.6.1.4.1.5.1.1.69.8.3.2.1
Inbound signaling type.
OBJECT-TYPE    
  INTEGER none(1), dtmf(2), dp(3), r2(4)  

accPstnTabSigOutType 1.3.6.1.4.1.5.1.1.69.8.3.2.2
Outbound signaling type.
OBJECT-TYPE    
  INTEGER none(1), dtmf(2), dp(3), r2(4)  

accPstnEtt 1.3.6.1.4.1.5.1.1.69.8.3.3
OBJECT IDENTIFIER    

accR2Sig 1.3.6.1.4.1.5.1.1.69.8.3.3.1
OBJECT IDENTIFIER    

accR2Sigo 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1
OBJECT IDENTIFIER    

accPstnTabSigR2CdDig 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.1
Number of called digits to request for an R2 signaling call.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigR2CnDig 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.2
Number of calling digits to request for an R2 signaling call.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigR2ReqCpc 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.3
This object holds the calling party category.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

accPstnTabSigR2AdMo 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.4
Group table to use for address termination.
OBJECT-TYPE    
  INTEGER groupBTable(1), groupATable(2)  

accPstnTabSigR2CdInMode 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.5
Defines the method used to signal a stop after receiving the called number digits.
OBJECT-TYPE    
  INTEGER signaled(1), timeout(2)  

accPstnTabSigR2CdOutMode 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.6
Defines the method used to signal a stop after sending the called number digits.
OBJECT-TYPE    
  INTEGER signaled(1), timeout(2)  

accPstnTabSigR2CnInMode 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.7
Defines the method used to signal a stop after receiving the calling number digits.
OBJECT-TYPE    
  INTEGER signaled(1), timeout(2)  

accPstnTabSigR2CnOutMode 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.8
Defines the mode used to stop sending the calling number digits.
OBJECT-TYPE    
  INTEGER signaled(1), timeout(2)  

accPstnTabSigR2RspInMode 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.9
Mode used for inbound call signaling (compelled, semi-compelled, none).
OBJECT-TYPE    
  INTEGER compelled(1), semicomp(2), noncomp(3)  

accPstnTabSigR2RspOutMode 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.10
Mode used for outbound call signaling (compelled, semi-compelled, none).
OBJECT-TYPE    
  INTEGER compelled(1), semicomp(2), noncomp(3)  

accPstnTabSigR2ObCpc 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.11
Calling party category used for outbound calls.
OBJECT-TYPE    
  INTEGER operator(1), ordinary(2), priority(3), data(4), maintenance(5)  

accPstnTabSigR2ObDflt 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.12
Called number used for outbound calls.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigR2ScDur 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.13
Holds the semi-compelled tone duration, used in either direction (inbound, outbound).
OBJECT-TYPE    
  INTEGER  

accPstnTabSigR2RspInDur 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.14
Maximum inbound signaling response duration for R2 signaling.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigR2RspOutDur 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.15
Maximum outbound signaling response duration for R2 signaling.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigR2InDur 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.16
Signaling timeout for inbound R2 calls.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigR2OutDur 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.17
Signaling timeout for outbound R2 calls.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigR2InHiPwr 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.18
High frequency tonepower setting for incoming calls.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigR2InLoPwr 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.19
Low frequency tonepower setting for incoming calls.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigR2OutHiPwr 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.20
High frequency tone power setting for outbound calls.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigR2OutLoPwr 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.21
Low frequency tone power setting for outbound calls.
OBJECT-TYPE    
  INTEGER  

accPstnTableInt 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.22
TBLSET currently in use.
OBJECT-TYPE    
  INTEGER  

accToneSupoo 1.3.6.1.4.1.5.1.1.69.8.3.3.2
OBJECT IDENTIFIER    

accPstnTable 1.3.6.1.4.1.5.1.1.69.8.3.3.2.1
Used for set tonetable command, determines which TBLSET will be set.
OBJECT-TYPE    
  INTEGER  

accPstnSignal 1.3.6.1.4.1.5.1.1.69.8.3.3.2.2
Signal currently in use (for tonetable).
OBJECT-TYPE    
  INTEGER  

accPstnFwdIntGI 1.3.6.1.4.1.5.1.1.69.8.3.3.2.3
Forward interpretation GI possible token values.
OBJECT-TYPE    
  INTEGER digit1(1), digit2(2), digit3(3), digit4(4), digit5(5), digit6(6), digit7(7), digit8(8), digit9(9), digit0(10), incomingOperator(11), delayOperator(12), accessTestEquipment(13), requireHalfEchoSuppressor(14), endOfInformation(15), spare(200)  

accPstnFwdIntGII 1.3.6.1.4.1.5.1.1.69.8.3.3.2.4
Forward interpretation GII possible token values.
OBJECT-TYPE    
  INTEGER nationalSubscriber(1), nationalPrioritySubscriber(2), nationalMaintenanceEquipment(3), nationalOp(5), nationalDataTransmission(6), internationalSubscriber(7), internationalDataTrans(8), internationalPrioritySubscriber(9), internationalOp(10), spare(200)  

accPstnFwdGenGI 1.3.6.1.4.1.5.1.1.69.8.3.3.2.5
Forward generation GI possible token values.
OBJECT-TYPE    
  INTEGER digit1(1), digit2(2), digit3(3), digit4(4), digit5(5), digit6(6), digit7(7), digit8(8), digit9(9), digit0(10), incomingOperator(11), delayOperator(12), accessTestEquipment(13), requireHalfEchoSuppressor(14), endOfInformation(15), spare(200)  

accPstnFwdGenGII 1.3.6.1.4.1.5.1.1.69.8.3.3.2.6
Forward generation GII possible token values.
OBJECT-TYPE    
  INTEGER nationalSubscriber(1), nationalPrioritySubscriber(2), nationalMaintenanceEquipment(3), nationalOp(5), nationalDataTransmission(6), internationalSubscriber(7), internationalDataTrans(8), internationalPrioritySubscriber(9), internationalOp(10), spare(200)  

accPstnBckIntGA 1.3.6.1.4.1.5.1.1.69.8.3.3.2.7
Backward interpretation GA possible token values.
OBJECT-TYPE    
  INTEGER sndNextDig(17), sndDigN1(18), addCmpltRcvB(19), congestNat(20), sndCpc(21), addCmpltEndSig(22), sndDigN2(23), sndDigN3(24), snd1stDig(25), sndCpcGoC(26), countryC(27), langDig(28), natureCirct-sndCallingLn(29), echoSup-sndSigGroup2(30), congestInt-vacnt(31), spare(200)  

accPstnBckIntGB 1.3.6.1.4.1.5.1.1.69.8.3.3.2.8
Backward interpretation GB possible token values.
OBJECT-TYPE    
  INTEGER sendSpecialInformationTone(18), subscriberLineBusy(19), congestion(20), unallocatedNumber(21), subscriberLineFreeCharge(22), subscriberLineFreeNoCharge(23), subscriberLineOutOfService(24), spare(200)  

accPstnBckIntGC 1.3.6.1.4.1.5.1.1.69.8.3.3.2.9
Backward interpretation GC possible token values.
OBJECT-TYPE    
  INTEGER sendNextCallingDigit(17), sendFirstCalledDigit(18), sendGroupB(19), congestionC(20), sendNextCalledDigit(21), sendSameCalledDigit(22), spare(200)  

accPstnBckGenGA 1.3.6.1.4.1.5.1.1.69.8.3.3.2.10
Backward generation GA possible token values.
OBJECT-TYPE    
  INTEGER sndNextDig(17), sndDigN1(18), addCmpltrcvB(19), congestNat(20), sndCpc(21), addCmpltendSig(22), sndDigN2(23), sndDigN3(24), snd1stDig(25), sndCpcGoC(26), countryC(27), langDig(28), natureCirct-sndCallingLn(29), echoSup-sndSigGroup2(30), congestint-vacnt(31), spare(200)  

accPstnBckGenGB 1.3.6.1.4.1.5.1.1.69.8.3.3.2.11
Backward generation GB possible token values.
OBJECT-TYPE    
  INTEGER sendSpecialInformationTone(18), subscriberLineBusy(19), congestion(20), unallocatedNumber(21), subscriberLineFreeCharge(22), subscriberLineFreeNoCharge(23), subscriberLineOutOfService(24), spare(200)  

accPstnBckGenGC 1.3.6.1.4.1.5.1.1.69.8.3.3.2.12
Backward generation GC possible token values.
OBJECT-TYPE    
  INTEGER sendNextCallingDigit(17), sendFirstCalledDigit(18), sendGroupB(19), congestionC(20), sendNextCalledDigit(21), sendSameCalledDigit(22), spare(200)  

accPstnTableDef 1.3.6.1.4.1.5.1.1.69.8.3.3.2.13
Default tonetable values. (sets all 4 TBLSETs, current will be set upon system reset.
OBJECT-TYPE    
  INTEGER  

accPstnDisplayFGTableSet1 1.3.6.1.4.1.5.1.1.69.8.3.3.2.14
Display object for TBLSET 1, forward generation
OBJECT-TYPE    
  INTEGER  

accPstnDisplayFGTableSet2 1.3.6.1.4.1.5.1.1.69.8.3.3.2.15
Display object for TBLSET 2, forward generation
OBJECT-TYPE    
  INTEGER  

accPstnDisplayFGTableSet3 1.3.6.1.4.1.5.1.1.69.8.3.3.2.16
Display object for TBLSET 3, forward generation
OBJECT-TYPE    
  INTEGER  

accPstnDisplayFGTableSet4 1.3.6.1.4.1.5.1.1.69.8.3.3.2.17
Display object for TBLSET 4, forward generation
OBJECT-TYPE    
  INTEGER  

accPstnDisplayFITableSet1 1.3.6.1.4.1.5.1.1.69.8.3.3.2.18
Display object for TBLSET 1, forward interpretation
OBJECT-TYPE    
  INTEGER  

accPstnDisplayFITableSet2 1.3.6.1.4.1.5.1.1.69.8.3.3.2.19
Display object for TBLSET 2, forward interpretation
OBJECT-TYPE    
  INTEGER  

accPstnDisplayFITableSet3 1.3.6.1.4.1.5.1.1.69.8.3.3.2.20
Display object for TBLSET 3, forward interpretation
OBJECT-TYPE    
  INTEGER  

accPstnDisplayFITableSet4 1.3.6.1.4.1.5.1.1.69.8.3.3.2.21
Display object for TBLSET 4, forward interpretation
OBJECT-TYPE    
  INTEGER  

accPstnDisplayBGTableSet1 1.3.6.1.4.1.5.1.1.69.8.3.3.2.22
Display object for TBLSET 1, backward generation
OBJECT-TYPE    
  INTEGER  

accPstnDisplayBGTableSet2 1.3.6.1.4.1.5.1.1.69.8.3.3.2.23
Display object for TBLSET 2, backward generation
OBJECT-TYPE    
  INTEGER  

accPstnDisplayBGTableSet3 1.3.6.1.4.1.5.1.1.69.8.3.3.2.24
Display object for TBLSET 3, backward generation
OBJECT-TYPE    
  INTEGER  

accPstnDisplayBGTableSet4 1.3.6.1.4.1.5.1.1.69.8.3.3.2.25
Display object for TBLSET 4, backward generation
OBJECT-TYPE    
  INTEGER  

accPstnDisplayBITableSet1 1.3.6.1.4.1.5.1.1.69.8.3.3.2.26
Display object for TBLSET 1, backward interpretation
OBJECT-TYPE    
  INTEGER  

accPstnDisplayBITableSet2 1.3.6.1.4.1.5.1.1.69.8.3.3.2.27
Display object for TBLSET 2, backward interpretation
OBJECT-TYPE    
  INTEGER  

accPstnDisplayBITableSet3 1.3.6.1.4.1.5.1.1.69.8.3.3.2.28
Display object for TBLSET 3, backward interpretation
OBJECT-TYPE    
  INTEGER  

accPstnDisplayBITableSet4 1.3.6.1.4.1.5.1.1.69.8.3.3.2.29
Display object for TBLSET 4, backward interpretation
OBJECT-TYPE    
  INTEGER  

accPstnTTIndex 1.3.6.1.4.1.5.1.1.69.8.3.3.3
Setting default timer for tonetables
OBJECT-TYPE    
  INTEGER  

accDTMF 1.3.6.1.4.1.5.1.1.69.8.3.4
OBJECT IDENTIFIER    

accDTMFo 1.3.6.1.4.1.5.1.1.69.8.3.4.1
OBJECT IDENTIFIER    

accDTMFoo 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1
OBJECT IDENTIFIER    

accPstnTabSigDtCpEnd 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.1
Call progress end timer for DTMF signaling.
OBJECT-TYPE    
  INTEGER none(1), ringbackbusy(2)  

accPstnTabSigDtCpSt 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.2
Call progress start timer for DTMF signaling.
OBJECT-TYPE    
  INTEGER none(1), dial(2)  

accPstnTabSigDtCpTo 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.3
Call progress timeout timer for DTMF signaling.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDtDt 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.4
Digit timeout timer for DTMF signaling.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDtIbCpSt 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.5
If set to DIAL, ibcallprogress will wait for a dial tone from the other side before starting the call, when set to NONE, it won't.
OBJECT-TYPE    
  INTEGER none(1), dial(2)  

accPstnTabSigDtIbCpTp 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.6
Tonepower setting for inbound DTMF calls, from zero to -12 dB.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDtPm 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.7
Parsemask for DTMF signaling.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDtPmCo 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.8
Number of digits in the DTMF parsemask.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDtSt 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.9
DTMF (touch tone) signal timeout.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDtHiPwr 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.10
Power of high frequency tone for DTMF signaling.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDtLoPwr 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.11
Power of low frequency tone for DTMF signaling.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDtOffTime 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.12
Off time for DTMF digit tonetiming.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDtOnTime 1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.13
On time for DTMF digit tonetiming.
OBJECT-TYPE    
  INTEGER  

accDPSig 1.3.6.1.4.1.5.1.1.69.8.3.5
OBJECT IDENTIFIER    

accDPSigo 1.3.6.1.4.1.5.1.1.69.8.3.5.1
OBJECT IDENTIFIER    

accDPSigoo 1.3.6.1.4.1.5.1.1.69.8.3.5.1.1
OBJECT IDENTIFIER    

accPstnTabSigDpCpEnd 1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.1
Action to be performed at end of dial pulse callprogress signaling.
OBJECT-TYPE    
  INTEGER none(1), ringbackbusy(2)  

accPstnTabSigDpCpSt 1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.2
Action to be performed at start of dial pulse callprogress signaling.
OBJECT-TYPE    
  INTEGER none(1), dial(2)  

accPstnTabSigDpCpTo 1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.3
Dial pulse callprogress timeout.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDpDt 1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.4
Timer for dial pulse digit timeout.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDpPm 1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.5
Parsemask for dial pulse signaling.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDpPmCo 1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.6
Count of digits in the dial pulse parsemask.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDpBrkTime 1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.7
Break timer for pulse dialing.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDpIdTime 1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.8
Idle time used for dial pulse digit timing.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDpMkTime 1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.9
Make time used for dial pulse digit timing.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigDpSt 1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.10
Signal duration for use in dial pulse sigtimeout.
OBJECT-TYPE    
  INTEGER  

accPstnTabSigGenT 1.3.6.1.4.1.5.1.1.69.8.4
OBJECT IDENTIFIER    

accPstnTabLineTrace 1.3.6.1.4.1.5.1.1.69.8.4.1
Depth of messages to be displayed in the trace.
OBJECT-TYPE    
  INTEGER  

accPstnTabSupType 1.3.6.1.4.1.5.1.1.69.8.4.2
Line supervision type.
OBJECT-TYPE    
  INTEGER r2(1), em(2), none(3)  

accPstnSupGen 1.3.6.1.4.1.5.1.1.69.8.4.4
OBJECT IDENTIFIER    

accEMLinSup 1.3.6.1.4.1.5.1.1.69.8.4.4.1
OBJECT IDENTIFIER    

accEMLinSupo 1.3.6.1.4.1.5.1.1.69.8.4.4.1.1
OBJECT IDENTIFIER    

accPstnTabSupEmDsOutStDly 1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.1
Delay Dial Start Dial delay time for outbound E&M calls
OBJECT-TYPE    
  INTEGER  

accPstnTabSupEmGl 1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.2
Notifies call of what to do if glare (call attempts in opposite directions on the same line, at the same time) occurs.
OBJECT-TYPE    
  INTEGER backoff(1), proceed(2)  

accPstnTabSupEmImOutStDly 1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.3
Start delay for use in Immediate Start Mode
OBJECT-TYPE    
  INTEGER  

accPstnTabSupEmWiInDur 1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.4
Duration of incoming wink timer.
OBJECT-TYPE    
  INTEGER  

accPstnTabSupEmWiOutEndTo 1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.5
Wink end timeout for outgoing E&M calls.
OBJECT-TYPE    
  INTEGER  

accPstnTabSupEmWiOutStDly 1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.6
Wink start delay duration for outgoing E&M calls.
OBJECT-TYPE    
  INTEGER  

accPstnTabSupEmWiOutStTo 1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.7
Wink start timeout duration for outgoing E&M calls.
OBJECT-TYPE    
  INTEGER  

accPstnTabSupInMode 1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.8
E&M incoming call mode.
OBJECT-TYPE    
  INTEGER immediate(1), wink(2), delayed(3)  

accPstnTabSupOutMode 1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.9
E&M outgoing call mode.
OBJECT-TYPE    
  INTEGER immediate(1), wink(2), delayed(3)  

accPstnTabSupEmDsInDur 1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.11
E&M delay dial start delay incoming timeout.
OBJECT-TYPE    
  INTEGER  

accPstnTabSupEmDsOutEndTo 1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.12
E&M delay dial start delay outgoing end timeout.
OBJECT-TYPE    
  INTEGER  

accPstnTabSupEmDsOutStTo 1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.13
E&M delay dial start delay outgoing start timeout.
OBJECT-TYPE    
  INTEGER  

accR2LinSupoo 1.3.6.1.4.1.5.1.1.69.8.4.4.3
OBJECT IDENTIFIER    

accPstnTabSupR2AnAnsDly 1.3.6.1.4.1.5.1.1.69.8.4.4.3.1
Answer delay duration.
OBJECT-TYPE    
  INTEGER  

accPstnTabSupR2AnInPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.2
Answer pattern used for incoming calls.
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2AnOutPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.3
Answer pattern used for outgoing calls.
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2AnRecTime 1.3.6.1.4.1.5.1.1.69.8.4.4.3.4
Recognition timer for answer pattern.
OBJECT-TYPE    
  INTEGER  

accPstnTabSupR2BlInPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.5
Blocking pattern for incoming R2 calls.
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2BlOutPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.6
Blocking pattern for outgoing R2 calls.
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2BlRecTime 1.3.6.1.4.1.5.1.1.69.8.4.4.3.7
Recognition timer for block pattern.
OBJECT-TYPE    
  INTEGER  

accPstnTabSupR2CbFcbTime 1.3.6.1.4.1.5.1.1.69.8.4.4.3.8
Forced clearback timer duration.
OBJECT-TYPE    
  INTEGER  

accPstnTabSupR2CbInPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.9
Clear backward pattern for incoming R2 calls.
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2CbOutPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.10
Clear backward pattern for outgoing R2 calls.
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2CbRecTime 1.3.6.1.4.1.5.1.1.69.8.4.4.3.11
Recognition timer for clear backward pattern.
OBJECT-TYPE    
  INTEGER  

accPstnTabSupR2CfInPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.12
Clear forward pattern for incoming R2 calls.
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2CfOutPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.13
Clear forward pattern for outgoing R2 calls.
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2CfRecTime 1.3.6.1.4.1.5.1.1.69.8.4.4.3.14
Recognition timer for clear forward pattern.
OBJECT-TYPE    
  INTEGER  

accPstnTabSupR2Gl 1.3.6.1.4.1.5.1.1.69.8.4.4.3.15
Action to be taken if glare (call attempts in opposite directions on the same line, at the same time) occurs.
OBJECT-TYPE    
  INTEGER backoff(1), proceed(2)  

accPstnTabSupR2IdInPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.16
Idle pattern for incoming R2 calls.
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2IdOutPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.17
Idle pattern for outgoing R2 calls.
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2IdRecTime 1.3.6.1.4.1.5.1.1.69.8.4.4.3.18
Recognition timer for Idle R2 signaling.
OBJECT-TYPE    
  INTEGER  

accPstnTabSupR2Mask 1.3.6.1.4.1.5.1.1.69.8.4.4.3.19
Parse mask used for R2 line supervision.
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2SaInPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.20
Inbound call pattern for szack R2 signaling.
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2SaOutPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.21
Outbound call pattern for szack R2 signaling.
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2SaRecTime 1.3.6.1.4.1.5.1.1.69.8.4.4.3.22
Recognition timer for szack R2 signaling.
OBJECT-TYPE    
  INTEGER  

accPstnTabSupR2SzInPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.23
Inbound call pattern for seize R2 signaling.
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2SzOutPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.24
Outbound call pattern for seize R2 signaling.
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16)  

accPstnTabSupR2SzRecTime 1.3.6.1.4.1.5.1.1.69.8.4.4.3.25
Recognition timer for seize signaling.
OBJECT-TYPE    
  INTEGER  

accPstnTabSupR2MeInPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.26
Inbound metering pattern.
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16), disabled(17)  

accPstnTabSupR2MeOutPat 1.3.6.1.4.1.5.1.1.69.8.4.4.3.27
Outbound metering pattern.
OBJECT-TYPE    
  INTEGER b0000(1), b0001(2), b0010(3), b0011(4), b0100(5), b0101(6), b0110(7), b0111(8), b1000(9), b1001(10), b1010(11), b1011(12), b1100(13), b1101(14), b1110(15), b1111(16), disabled(17)  

accPstnTabSupR2MeRecTime 1.3.6.1.4.1.5.1.1.69.8.4.4.3.28
Recognition timer for the metering patterns.
OBJECT-TYPE    
  INTEGER  

accPstnTabSupR2MeDly 1.3.6.1.4.1.5.1.1.69.8.4.4.3.29
Delay timer for the metering patterns.
OBJECT-TYPE    
  INTEGER  

accPstnTabSupR2MeOffTime 1.3.6.1.4.1.5.1.1.69.8.4.4.3.30
Metering pattern offtime timer
OBJECT-TYPE    
  INTEGER  

accPstnTabSupR2MeOnTime 1.3.6.1.4.1.5.1.1.69.8.4.4.3.31
Metering pattern ontime.
OBJECT-TYPE    
  INTEGER  

accMisc 1.3.6.1.4.1.5.1.1.69.8.5
OBJECT IDENTIFIER    

accDsprmMessageLevel 1.3.6.1.4.1.5.1.1.69.8.5.1
Level for depth of messages from the DSPRM.
OBJECT-TYPE    
  INTEGER  

accPstnTabPstnDslIndex 1.3.6.1.4.1.5.1.1.69.8.5.2
Wonky index, used for displaying tables. (c/o james)
OBJECT-TYPE    
  INTEGER  

accPstnOperstatus 1.3.6.1.4.1.5.1.1.69.8.5.3
Current use of DSP (unallocated, idle, modem...)
OBJECT-TYPE    
  INTEGER  

Defined Objects

AccPstnSubTabEntry  
SEQUENCE    
  INTEGER as oPstnSubTabDslIndex  
  INTEGER as oPstnSubTabSigSystem  
  INTEGER as oPstnSubTabNumChannels  
  INTEGER as oPstnSubTabAdminStatus  
  INTEGER as oPstnSubTabOperStatus  
  INTEGER as oPstnSubTabMsgLevel  
  INTEGER as oPstnSubTabLastCause  
  INTEGER as oPstnSubTabNumberGroup  

AccPstnStatEntry  
SEQUENCE    
  INTEGER as oPstnStatDslIndex  
  Counter as oPstnStatCallsOriginated  
  Counter as oPstnStatCallsOfferred  
  Counter as oPstnStatCallsRouted  
  Counter as oPstnStatCallsAccepted  
  Counter as oPstnStatCallsCompleted  
  Counter as oPstnStatCallsCleared  

AccPstnCallTableEntry  
SEQUENCE    
  INTEGER as oPstnCallTabDslIndex  
  INTEGER as oPstnCallTabCallId  
  INTEGER as oPstnCallTabOrigin  
  INTEGER as oPstnCallTabChannel  
  INTEGER as oPstnCallTabEndpoint  
  INTEGER as oPstnCallTabState  
  INTEGER as oPstnCallTabCause  
  INTEGER as oPstnCallTabAddress  
  INTEGER as oPstnCallTabInfoRate  
  INTEGER as oPstnCallTabInfoType  
  INTEGER as oPstnCallTabDuration  

AccPstnChanTableEntry  
SEQUENCE    
  INTEGER as oPstnChanTabDslIndex  
  INTEGER as oPstnChanTabChannel  
  INTEGER as oPstnChanTabServState  
  INTEGER as oPstnChanTabChanState  
  INTEGER as oPstnChanTabSlotMap  

AccPstnRBSParamTableEntry  
SEQUENCE    
  INTEGER as oPstnRbsTabDslIndex  
  INTEGER as oPstnRbsTabSuprModeIn  
  INTEGER as oPstnRbsTabSuprModeOut  
  INTEGER as oPstnRbsTabRegnModeIn  
  INTEGER as oPstnRbsTabRegnModeOut  
  INTEGER as oPstnRbsTabPresModeIn  
  INTEGER as oPstnRbsTabPresModeOut  
  INTEGER as oPstnRbsTabGlareAction  
  INTEGER as oPstnRbsTabWoddDuration  
  INTEGER as oPstnRbsTabWsddDetect  
  INTEGER as oPstnRbsTabWesdDetect  
  INTEGER as oPstnRbsTabEnblocDigits  
  INTEGER as oPstnRbsTabEnblocTimeout  

AccPstnIntCasSupvParamEntry  
SEQUENCE    
  INTEGER as oPstnCasTabDslIndex  
  INTEGER as oPstnCasTabSupvModeIn  
  INTEGER as oPstnCasTabSupvModeOut  
  INTEGER as oPstnCasTabSupvMask  
  INTEGER as oPstnCasTabSupvIdlePatt  
  INTEGER as oPstnCasTabSupvIdleTime  
  INTEGER as oPstnCasTabSupvSeizePatt  
  INTEGER as oPstnCasTabSupvSeizeTime  
  INTEGER as oPstnCasTabSupvSeizeAckPatt  
  INTEGER as oPstnCasTabSupvSeizeAckTime  
  INTEGER as oPstnCasTabSupvAnswerPatt  
  INTEGER as oPstnCasTabSupvAnswerTime  
  INTEGER as oPstnCasTabSupvClrForwPatt  
  INTEGER as oPstnCasTabSupvClrForwTime  
  INTEGER as oPstnCasTabSupvClrBackPatt  
  INTEGER as oPstnCasTabSupvClrBackTime  
  INTEGER as oPstnCasTabSupvBlockPatt  
  INTEGER as oPstnCasTabSupvBlockTime  
  INTEGER as oPstnCasTabSupvMetPatt  
  INTEGER as oPstnCasTabSupvMetTime  
  INTEGER as oPstnCasTabSupvMetDelay  
  INTEGER as oPstnCasTabSupvMetOn  
  INTEGER as oPstnCasTabSupvMetOff  
  INTEGER as oPstnCasTabSupvGlare  
  INTEGER as oPstnCasTabRegModeIn  
  INTEGER as oPstnCasTabRegModeOut  
  INTEGER as oPstnCasTabRegComp1Tone  
  INTEGER as oPstnCasTabRegComp1On  
  INTEGER as oPstnCasTabRegComp1Off  
  INTEGER as oPstnCasTabRegComp2Tone  
  INTEGER as oPstnCasTabRegComp2On  
  INTEGER as oPstnCasTabRegComp2Off