
| SNMPv2-SMI | SNMPv2-TC | SNMPv2-CONF |
| ACMEPACKET-SMI | ACMEPACKET-TC |
| apEnvMonModule | 1.3.6.1.4.1.9148.3.3 | ||
| The MIB module to describe the status of the Environmental Monitor on the devices. | |||
| MODULE-IDENTITY | |||
| apEnvMonObjects | 1.3.6.1.4.1.9148.3.3.1 | ||
| OBJECT IDENTIFIER | |||
| apEnvMonI2CState | 1.3.6.1.4.1.9148.3.3.1.1 | ||
| the state of environment monitor located in the chassis. | |||
| OBJECT-TYPE | |||
| ApEnvMonState | |||
| apEnvMonVoltageObjects | 1.3.6.1.4.1.9148.3.3.1.2 | ||
| OBJECT IDENTIFIER | |||
| apEnvMonVoltageStatusTable | 1.3.6.1.4.1.9148.3.3.1.2.1 | ||
| The table of voltage status maintained by the environmental monitor. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ApEnvMonVoltageStatusEntry | |||
| apEnvMonVoltageStatusEntry | 1.3.6.1.4.1.9148.3.3.1.2.1.1 | ||
| An entry in the voltage status table, representing the status of the associated testpoint maintained by the environmental monitor. | |||
| OBJECT-TYPE | |||
| ApEnvMonVoltageStatusEntry | |||
| apEnvMonVoltageStatusIndex | 1.3.6.1.4.1.9148.3.3.1.2.1.1.1 | ||
| Unique index for the testpoint being instrumented. This index is for SNMP purposes only, and has no intrinsic meaning. | |||
| OBJECT-TYPE | |||
| Integer32 | 1..2147483647 | ||
| apEnvMonVoltageStatusType | 1.3.6.1.4.1.9148.3.3.1.2.1.1.2 | ||
| The entity part type from which the voltage value is from v2p5- 2.5V sensor: L3 cache core voltage; micro-processor and co-processoor I/O voltage; FPGA memories I/O voltage. v3p3 - 3.3V sensor: general TTL supply rail; control logic; micro-processor; micro-processor and co-processor; SDRAM v5 - 5V sensor: Fans; micro-processor core voltage regulator. CPU - CPU voltage micro-processor core voltage. | |||
| OBJECT-TYPE | |||
| INTEGER | unknown(0), v2p5(1), v3p3(2), v5(3), cpu(4), v1(5), v1p1(6), v1p15(7), v1p2(8), v1p212(9), v1p25(10), v1p3(11), v1p5(12), v1p8(13), v2p6(14) | ||
| apEnvMonVoltageStatusDescr | 1.3.6.1.4.1.9148.3.3.1.2.1.1.3 | ||
| Textual description of the voltage being instrumented. This description is a short textual label, suitable as a human-sensible identification for the rest of the information in the entry. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..64) | ||
| apEnvMonVoltageStatusValue | 1.3.6.1.4.1.9148.3.3.1.2.1.1.4 | ||
| The current measurement of voltage if avaiable. The value is expressed as the integer in millivolts unit. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| apEnvMonVoltageState | 1.3.6.1.4.1.9148.3.3.1.2.1.1.5 | ||
| The current state of the testpoint being instrumented. | |||
| OBJECT-TYPE | |||
| ApEnvMonState | |||
| apEnvMonVoltageSlotID | 1.3.6.1.4.1.9148.3.3.1.2.1.1.6 | ||
| The slot this voltage is found on. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| apEnvMonVoltageSlotType | 1.3.6.1.4.1.9148.3.3.1.2.1.1.7 | ||
| The type of module found in this slot. | |||
| OBJECT-TYPE | |||
| ApHardwareModuleFamily | |||
| apEnvMonTemperatureObjects | 1.3.6.1.4.1.9148.3.3.1.3 | ||
| OBJECT IDENTIFIER | |||
| apEnvMonTemperatureStatusTable | 1.3.6.1.4.1.9148.3.3.1.3.1 | ||
| The table of ambient temperature status maintained by the environmental monitor. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ApEnvMonTemperatureStatusEntry | |||
| apEnvMonTemperatureStatusEntry | 1.3.6.1.4.1.9148.3.3.1.3.1.1 | ||
| An entry in the ambient temperature status table, representing the status of the associated testpoint maintained by the environmental monitor. | |||
| OBJECT-TYPE | |||
| ApEnvMonTemperatureStatusEntry | |||
| apEnvMonTemperatureStatusIndex | 1.3.6.1.4.1.9148.3.3.1.3.1.1.1 | ||
| Unique index for the testpoint being instrumented. This index is for SNMP purposes only, and has no intrinsic meaning. | |||
| OBJECT-TYPE | |||
| Integer32 | 1..2147483647 | ||
| apEnvMonTemperatureStatusType | 1.3.6.1.4.1.9148.3.3.1.3.1.1.2 | ||
| The entity part type from which the temperature value is from | |||
| OBJECT-TYPE | |||
| INTEGER | ds1624sMain(1), ds1624sCPU(2), lm84(3), lm75(4), lm75Main(5), lm75Cpu(6), lm75Phy(7) | ||
| apEnvMonTemperatureStatusDescr | 1.3.6.1.4.1.9148.3.3.1.3.1.1.3 | ||
| Textual description of the temperature being instrumented. This description is a short textual label, suitable as a human-sensible identification for the rest of the information in the entry. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..64) | ||
| apEnvMonTemperatureStatusValue | 1.3.6.1.4.1.9148.3.3.1.3.1.1.4 | ||
| The current measurement of the testpoint being instrumented. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| apEnvMonTemperatureState | 1.3.6.1.4.1.9148.3.3.1.3.1.1.5 | ||
| The current state of the testpoint being instrumented. | |||
| OBJECT-TYPE | |||
| ApEnvMonState | |||
| apEnvMonTemperatureSlotID | 1.3.6.1.4.1.9148.3.3.1.3.1.1.6 | ||
| The slot this temperature is found on. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| apEnvMonTemperatureSlotType | 1.3.6.1.4.1.9148.3.3.1.3.1.1.7 | ||
| The type of module found in this slot. | |||
| OBJECT-TYPE | |||
| ApHardwareModuleFamily | |||
| apEnvMonFanObjects | 1.3.6.1.4.1.9148.3.3.1.4 | ||
| OBJECT IDENTIFIER | |||
| apEnvMonFanStatusTable | 1.3.6.1.4.1.9148.3.3.1.4.1 | ||
| The table of fan status maintained by the environmental monitor. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ApEnvMonFanStatusEntry | |||
| apEnvMonFanStatusEntry | 1.3.6.1.4.1.9148.3.3.1.4.1.1 | ||
| An entry in the fan status table, representing the status of the associated fan maintained by the environmental monitor. | |||
| OBJECT-TYPE | |||
| ApEnvMonFanStatusEntry | |||
| apEnvMonFanStatusIndex | 1.3.6.1.4.1.9148.3.3.1.4.1.1.1 | ||
| Unique index for the fan being instrumented. This index is for SNMP purposes only. | |||
| OBJECT-TYPE | |||
| Integer32 | 1..2147483647 | ||
| apEnvMonFanStatusType | 1.3.6.1.4.1.9148.3.3.1.4.1.1.2 | ||
| The entity part type from which the fan value is from. The left and right at the base when one faces the front of the SD. Next-generation products contain replaceable fans contained in chassis slots. | |||
| OBJECT-TYPE | |||
| INTEGER | left(0), middle(1), right(2), slot(3) | ||
| apEnvMonFanStatusDescr | 1.3.6.1.4.1.9148.3.3.1.4.1.1.3 | ||
| Textual description of the fan being instrumented. This description is a short textual label, suitable as a human-sensible identification for the rest of the information in the entry. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..64) | ||
| apEnvMonFanStatusValue | 1.3.6.1.4.1.9148.3.3.1.4.1.1.4 | ||
| The current percentage measurement of the fan speed. | |||
| OBJECT-TYPE | |||
| Gauge32 | |||
| apEnvMonFanState | 1.3.6.1.4.1.9148.3.3.1.4.1.1.5 | ||
| The current state of the fan being instrumented. | |||
| OBJECT-TYPE | |||
| ApEnvMonState | |||
| apEnvMonFanSlotID | 1.3.6.1.4.1.9148.3.3.1.4.1.1.6 | ||
| The slot this van is found in. zero is returned if this fan is not of apEnvMonFanStatusType slot(3). | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| apEnvMonPowerSupplyObjects | 1.3.6.1.4.1.9148.3.3.1.5 | ||
| OBJECT IDENTIFIER | |||
| apEnvMonPowerSupplyStatusTable | 1.3.6.1.4.1.9148.3.3.1.5.1 | ||
| The table of power supply status maintained by the environmental monitor card. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ApEnvMonPowerSupplyStatusEntry | |||
| apEnvMonPowerSupplyStatusEntry | 1.3.6.1.4.1.9148.3.3.1.5.1.1 | ||
| An entry in the power supply status table, representing the status of the associated power supply maintained by the environmental monitor card. | |||
| OBJECT-TYPE | |||
| ApEnvMonPowerSupplyStatusEntry | |||
| apEnvMonPowerSupplyStatusIndex | 1.3.6.1.4.1.9148.3.3.1.5.1.1.1 | ||
| Unique index for the power supply being instrumented. This index is for SNMP purposes only. | |||
| OBJECT-TYPE | |||
| Integer32 | 1..2147483647 | ||
| apEnvMonPowerSupplyStatusType | 1.3.6.1.4.1.9148.3.3.1.5.1.1.2 | ||
| The entity part type from which the power status is from. 0=left:power supply A, 1=right:power supply B. 3=slot: power supply is contained in the slot corresponding to apEnvMonPowerSowerSupplyStatusIndex | |||
| OBJECT-TYPE | |||
| INTEGER | left(0), right(1), slot(3) | ||
| apEnvMonPowerSupplyStatusDescr | 1.3.6.1.4.1.9148.3.3.1.5.1.1.3 | ||
| Textual description of the power supply being instrumented. This description is a short textual label, suitable as a human-sensible identification for the rest of the information in the entry. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..64) | ||
| apEnvMonPowerSupplyState | 1.3.6.1.4.1.9148.3.3.1.5.1.1.4 | ||
| The current state of the power supply being instrumented: normal or notPresent | |||
| OBJECT-TYPE | |||
| ApEnvMonState | |||
| apEnvMonPhyCardObjects | 1.3.6.1.4.1.9148.3.3.1.6 | ||
| OBJECT IDENTIFIER | |||
| apEnvMonPhyCardStatusTable | 1.3.6.1.4.1.9148.3.3.1.6.1 | ||
| THIS TABLE IS BEING DEPRECATED IN FAVOR OF THE MORE GENERIC apEnvMonCardTable. Please Note: in the generic card table, a phy card is referred to as an 'niu' (network interfacing unit). The table of phy card status maintained by the environmental monitor. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ApEnvMonPhyCardStatusEntry | |||
| apEnvMonPhyCardStatusEntry | 1.3.6.1.4.1.9148.3.3.1.6.1.1 | ||
| An entry in the phy status table, representing the status of the associated phy maintained by the environmental monitor. | |||
| OBJECT-TYPE | |||
| ApEnvMonPhyCardStatusEntry | |||
| apEnvMonPhyCardStatusIndex | 1.3.6.1.4.1.9148.3.3.1.6.1.1.1 | ||
| Unique index for the phy being instrumented. This index is for SNMP purposes only. | |||
| OBJECT-TYPE | |||
| Integer32 | 1..2147483647 | ||
| apEnvMonPhyCardStatusType | 1.3.6.1.4.1.9148.3.3.1.6.1.1.2 | ||
| The entity part type from which the phy card is from. 0=left:card A, 1=right:card B, 3=only card. 3=slot: phyCard is contained in the slot corresponding to apEnvMonPhyCardStatusIndex | |||
| OBJECT-TYPE | |||
| INTEGER | left(0), right(1), slot(3) | ||
| apEnvMonPhyCardStatusDescr | 1.3.6.1.4.1.9148.3.3.1.6.1.1.3 | ||
| Textual description of the phy being instrumented. This description is a short textual label, suitable as a human-sensible identification for the rest of the information in the entry. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..32) | ||
| apEnvMonPhyCardState | 1.3.6.1.4.1.9148.3.3.1.6.1.1.4 | ||
| The current state of the phy being instrumented: normal or notPresent | |||
| OBJECT-TYPE | |||
| ApEnvMonState | |||
| apEnvMonCardObjects | 1.3.6.1.4.1.9148.3.3.1.7 | ||
| OBJECT IDENTIFIER | |||
| apEnvMonCardTable | 1.3.6.1.4.1.9148.3.3.1.7.1 | ||
| List of Cards in the chassis | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ApEnvMonCardEntry | |||
| apEnvMonCardEntry | 1.3.6.1.4.1.9148.3.3.1.7.1.1 | ||
| A single card in the chassis | |||
| OBJECT-TYPE | |||
| ApEnvMonCardEntry | |||
| apEnvMonCardSlot | 1.3.6.1.4.1.9148.3.3.1.7.1.1.1 | ||
| Slot number of this card. Please note that the slot number is zero-based, i.e. they are numbered 0-n. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| apEnvMonCardType | 1.3.6.1.4.1.9148.3.3.1.7.1.1.2 | ||
| The card type | |||
| OBJECT-TYPE | |||
| ApHardwareModuleFamily | |||
| apEnvMonCardDescr | 1.3.6.1.4.1.9148.3.3.1.7.1.1.3 | ||
| A text description of this card | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| apEnvMonCardHealthScore | 1.3.6.1.4.1.9148.3.3.1.7.1.1.4 | ||
| The health score of this card | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| apEnvMonCardState | 1.3.6.1.4.1.9148.3.3.1.7.1.1.5 | ||
| the current state of this card | |||
| OBJECT-TYPE | |||
| ApEnvMonState | |||
| apEnvMonCardRedundancy | 1.3.6.1.4.1.9148.3.3.1.7.1.1.6 | ||
| Redundancy state of the card | |||
| OBJECT-TYPE | |||
| ApRedundancyState | |||
| apEnvMonCpuCoreTable | 1.3.6.1.4.1.9148.3.3.1.7.2 | ||
| List of cores per CPU in the chassis | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ApEnvMonCpuCoreEntry | |||
| apEnvMonCpuCoreEntry | 1.3.6.1.4.1.9148.3.3.1.7.2.1 | ||
| A single CPU core in the chassis | |||
| OBJECT-TYPE | |||
| ApEnvMonCpuCoreEntry | |||
| apEnvMonCpuCoreIndex | 1.3.6.1.4.1.9148.3.3.1.7.2.1.1 | ||
| the core index on the CPU | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| apEnvMonCpuCoreDescr | 1.3.6.1.4.1.9148.3.3.1.7.2.1.2 | ||
| the cpu core descriptor | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| apEnvMonCpuCoreUsage | 1.3.6.1.4.1.9148.3.3.1.7.2.1.3 | ||
| The current percentage of use for the CPU core. | |||
| OBJECT-TYPE | |||
| Gauge32 | |||
| apEnvMonCpuCoreState | 1.3.6.1.4.1.9148.3.3.1.7.2.1.4 | ||
| The state of this CPU core. | |||
| OBJECT-TYPE | |||
| INTEGER | unknown(0), present(1), booting(2), registered(3), readywait(4), ready(5), bootTimeout(6), registerTimeout(7), manifestTimeout(8), readyTimeout(9), healthWait(101), healthRcvd(102), becomingActive(201), becomingStandby(202), becomingOOS(203), active(204), standby(205), oos(206), activeTimeout(207), standbyTimeout(208), oosTimeout(209), resetting(401), reset(402), resetTimeout(403), shuttingDown(404), shutOff(405), shutdownTimeout(406) | ||
| apEnvMonCpuCoreRamDescr | 1.3.6.1.4.1.9148.3.3.1.7.2.1.5 | ||
| The cpu core RAM descriptor | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| apEnvMonCpuCoreRamUsage | 1.3.6.1.4.1.9148.3.3.1.7.2.1.6 | ||
| The current percentage of use for the CPU core RAM. | |||
| OBJECT-TYPE | |||
| Gauge32 | |||
| apEnvMonMIBNotificationEnables | 1.3.6.1.4.1.9148.3.3.2 | ||
| OBJECT IDENTIFIER | |||
| apEnvMonEnableStatChangeNotif | 1.3.6.1.4.1.9148.3.3.2.1 | ||
| This variable indicates whether the system produces any of the traps generated by this mib. A false value will prevent them from being generated by this system. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| apEnvMonNotificationObjects | 1.3.6.1.4.1.9148.3.3.3 | ||
| OBJECT IDENTIFIER | |||
| apEnvMonTrapInstance | 1.3.6.1.4.1.9148.3.3.3.1 | ||
| The object ID of the item which value is exceeds its monitoring threshold. If the item is within a table, this OID is the instance of this item's index within its table. For exmple, 1. if the state of 2.5v voltage changes, the trap OID is the instance of index OID, which is 1.3.6.1.4.1.9148.3.3.1.2.4.1.1.1 2. if the state of mainboard temperature changes, the trap OID is, 1.3.6.1.4.1.9148.3.3.1.3.4.1.1.1 3. if the state of left fan changes, the trap OID is 1.3.6.1.4.1.9148.3.3.1.4.4.1.1.1 If the item is scalar, the OID is the instance is of this item, For example, If the I2C state changes, the OID is 1.3.6.1.4.1.9148.3.3.1.4.4.1.1.0 | |||
| OBJECT-TYPE | |||
| OBJECT IDENTIFIER | |||
| apEnvMonTrapPreviousState | 1.3.6.1.4.1.9148.3.3.3.2 | ||
| The previous state of the object. | |||
| OBJECT-TYPE | |||
| ApEnvMonState | |||
| apEnvMonTrapCurrentState | 1.3.6.1.4.1.9148.3.3.3.3 | ||
| The current state of the object which causes the trap to occur. | |||
| OBJECT-TYPE | |||
| ApEnvMonState | |||
| apEnvMonTrapSlotID | 1.3.6.1.4.1.9148.3.3.3.4 | ||
| The slotID which causes the trap to occur. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| apEnvMonTrapSlotType | 1.3.6.1.4.1.9148.3.3.3.5 | ||
| The slot type which causes the trap to occur. | |||
| OBJECT-TYPE | |||
| ApHardwareModuleFamily | |||
| apEnvMonTrapPortType | 1.3.6.1.4.1.9148.3.3.3.6 | ||
| The port type which causes the trap to occur. | |||
| OBJECT-TYPE | |||
| ApPhyPortType | |||
| apEnvMonTrapPresence | 1.3.6.1.4.1.9148.3.3.3.7 | ||
| The state which causes the trap to occur. | |||
| OBJECT-TYPE | |||
| ApPresence | |||
| apEnvMonTrapPortID | 1.3.6.1.4.1.9148.3.3.3.8 | ||
| The ID of the port which causes the trap to occur. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| apEnvMonMIBNotificationPrefix | 1.3.6.1.4.1.9148.3.3.4 | ||
| OBJECT IDENTIFIER | |||
| apEnvMonMIBNotifications | 1.3.6.1.4.1.9148.3.3.4.0 | ||
| OBJECT IDENTIFIER | |||
| apEnvMonI2CFailNotification | 1.3.6.1.4.1.9148.3.3.4.0.1 | ||
| A notification of I2C state turns from normal(1) to notFunctioning(7) | |||
| NOTIFICATION-TYPE | |||
| apEnvMonStatusChangeNotification | 1.3.6.1.4.1.9148.3.3.4.0.2 | ||
| A apEnvStatusChangeNotification is sent if any entry of above table change in the state of a device being monitored | |||
| NOTIFICATION-TYPE | |||
| apEnvMonTrapInstance | |||
| apEnvMonTrapPreviousState | |||
| apEnvMonTrapCurrentState | |||
| apEnvMonTempChangeNotification | 1.3.6.1.4.1.9148.3.3.4.0.3 | ||
| A notification is sent if any of the units cross a temperature threshold | |||
| NOTIFICATION-TYPE | |||
| apEnvMonTrapSlotID | |||
| apEnvMonTrapSlotType | |||
| apEnvMonTrapPreviousState | |||
| apEnvMonTrapCurrentState | |||
| apEnvMonVoltageChangeNotification | 1.3.6.1.4.1.9148.3.3.4.0.4 | ||
| A notification is sent if any of the units cross a voltage threshold | |||
| NOTIFICATION-TYPE | |||
| apEnvMonTrapSlotID | |||
| apEnvMonTrapSlotType | |||
| apEnvMonTrapPreviousState | |||
| apEnvMonTrapCurrentState | |||
| apEnvMonPortChangeNotification | 1.3.6.1.4.1.9148.3.3.4.0.5 | ||
| The trap will be generated if a physical port is inserted/present or removed/not present. | |||
| NOTIFICATION-TYPE | |||
| apEnvMonTrapPortType | |||
| apEnvMonTrapPresence | |||
| apEnvMonTrapSlotID | |||
| apEnvMonTrapPortID | |||
| apEnvMonMIBConformance | 1.3.6.1.4.1.9148.3.3.5 | ||
| OBJECT IDENTIFIER | |||
| apEnvMonMIBCompliances | 1.3.6.1.4.1.9148.3.3.5.1 | ||
| OBJECT IDENTIFIER | |||
| apEnvMonMIBGroups | 1.3.6.1.4.1.9148.3.3.5.2 | ||
| OBJECT IDENTIFIER | |||
| apEnvMonGroup | 1.3.6.1.4.1.9148.3.3.5.2.1 | ||
| A collection of objects providing environmental monitoring capability to an Acme Packet chassis. | |||
| OBJECT-GROUP | |||
| apEnvMonNotifyGroup | 1.3.6.1.4.1.9148.3.3.5.2.3 | ||
| A collection of notifications providing the status change for environmental monitoring. | |||
| NOTIFICATION-GROUP | |||
| apEnvMonExtGroup | 1.3.6.1.4.1.9148.3.3.5.2.4 | ||
| Additional objects providing environmental monitoring capability to an Acme Packet chassis. | |||
| OBJECT-GROUP | |||
| apEnvMonCardGroup | 1.3.6.1.4.1.9148.3.3.5.2.5 | ||
| A collection of objects providing environmental monitoring capability to card-based Acme Packet products. | |||
| OBJECT-GROUP | |||
| apEnvMonExtNotifyGroup | 1.3.6.1.4.1.9148.3.3.5.2.6 | ||
| Additional collection of notifications providing the status change for environmental monitoring. | |||
| NOTIFICATION-GROUP | |||
| apEnvMonPortNotifyGroup | 1.3.6.1.4.1.9148.3.3.5.2.7 | ||
| Notifications to indicate physical port changes. | |||
| NOTIFICATION-GROUP | |||
| ApEnvMonState | |||
| Represents the state of a device being monitored. Valid values are: initial (1): the environment is at initial state. normal (2) : the environment is good, such as low temperature. minor (3) : the environment is not good, such as: fan speed is more than minor alarm threshold, but less than major alarm threshold. major (4) : the environment is bad, such as: fan speed is more than major alarm threshold, but less than critical alarm threshold. critical(5): the environment is very bad, such as Fan speed is more than critical threshold. shutdown(6): the environment is the worst, the system should be shutdown immediately. notPresent(7): the environmental monitor is not present, such as temperature sensors do not exist. notFunctioning(8): the environmental monitor does not function properly, such as 1. I2C fail 2. a temperature sensor generates a abnormal data like 1000 C. unknown(9) : can not get the information due to internal error. | |||
| TEXTUAL-CONVENTION | |||
| INTEGER | initial(1), normal(2), minor(3), major(4), critical(5), shutdown(6), notPresent(7), notFunctioning(8), unknown(9) | ||
| ApEnvMonVoltageStatusEntry | |||
| SEQUENCE | |||
| Integer32 as apEnvMonVoltageStatusIndex | 1..2147483647 | ||
| INTEGER as apEnvMonVoltageStatusType | |||
| DisplayString as apEnvMonVoltageStatusDescr | |||
| Integer32 as apEnvMonVoltageStatusValue | |||
| ApEnvMonState as apEnvMonVoltageState | |||
| INTEGER as apEnvMonVoltageSlotID | |||
| ApHardwareModuleFamily as apEnvMonVoltageSlotType | |||
| ApEnvMonTemperatureStatusEntry | |||
| SEQUENCE | |||
| Integer32 as apEnvMonTemperatureStatusIndex | 1..2147483647 | ||
| INTEGER as apEnvMonTemperatureStatusType | |||
| DisplayString as apEnvMonTemperatureStatusDescr | |||
| Integer32 as apEnvMonTemperatureStatusValue | |||
| ApEnvMonState as apEnvMonTemperatureState | |||
| INTEGER as apEnvMonTemperatureSlotID | |||
| ApHardwareModuleFamily as apEnvMonTemperatureSlotType | |||
| ApEnvMonFanStatusEntry | |||
| SEQUENCE | |||
| Integer32 as apEnvMonFanStatusIndex | 1..2147483647 | ||
| INTEGER as apEnvMonFanStatusType | |||
| DisplayString as apEnvMonFanStatusDescr | |||
| Gauge32 as apEnvMonFanStatusValue | |||
| ApEnvMonState as apEnvMonFanState | |||
| INTEGER as apEnvMonFanSlotID | |||
| ApEnvMonPowerSupplyStatusEntry | |||
| SEQUENCE | |||
| Integer32 as apEnvMonPowerSupplyStatusIndex | 1..2147483647 | ||
| INTEGER as apEnvMonPowerSupplyStatusType | |||
| DisplayString as apEnvMonPowerSupplyStatusDescr | |||
| ApEnvMonState as apEnvMonPowerSupplyState | |||
| ApEnvMonPhyCardStatusEntry | |||
| SEQUENCE | |||
| Integer32 as apEnvMonPhyCardStatusIndex | 1..2147483647 | ||
| INTEGER as apEnvMonPhyCardStatusType | |||
| DisplayString as apEnvMonPhyCardStatusDescr | |||
| ApEnvMonState as apEnvMonPhyCardState | |||
| ApEnvMonCardEntry | |||
| SEQUENCE | |||
| INTEGER as apEnvMonCardSlot | |||
| ApHardwareModuleFamily as apEnvMonCardType | |||
| DisplayString as apEnvMonCardDescr | |||
| INTEGER as apEnvMonCardHealthScore | |||
| ApEnvMonState as apEnvMonCardState | |||
| ApRedundancyState as apEnvMonCardRedundancy | |||
| ApEnvMonCpuCoreEntry | |||
| SEQUENCE | |||
| INTEGER as apEnvMonCpuCoreIndex | |||
| DisplayString as apEnvMonCpuCoreDescr | |||
| Gauge32 as apEnvMonCpuCoreUsage | |||
| INTEGER as apEnvMonCpuCoreState | |||
| DisplayString as apEnvMonCpuCoreRamDescr | |||
| Gauge32 as apEnvMonCpuCoreRamUsage | |||