
| SNMPv2-SMI | SNMPv2-TC | SNMPv2-CONF |
| RFC1213-MIB |
| lucent | 1.3.6.1.4.1.1751 | ||
| OBJECT IDENTIFIER | |||
| mibs | 1.3.6.1.4.1.1751.2 | ||
| OBJECT IDENTIFIER | |||
| acMIB | 1.3.6.1.4.1.1751.2.18 | ||
| Lucent Access Concentrator, Release 6.2 | |||
| MODULE-IDENTITY | |||
| sysConfig | 1.3.6.1.4.1.1751.2.18.1 | ||
| OBJECT IDENTIFIER | |||
| siteName | 1.3.6.1.4.1.1751.2.18.1.1 | ||
| site name - ascii | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(20) | ||
| siteID | 1.3.6.1.4.1.1751.2.18.1.2 | ||
| site id - numerical | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(4) | ||
| siteEtherIpAddr | 1.3.6.1.4.1.1751.2.18.1.3 | ||
| ip address for ethernet access to the site (switch) | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| siteEtherIpMask | 1.3.6.1.4.1.1751.2.18.1.4 | ||
| ip mask for ethernet access to the site (switch) | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| siteGatewayAddr | 1.3.6.1.4.1.1751.2.18.1.5 | ||
| ip address for gateway access to the site (switch) | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| siteAtmAddrPrefix1 | 1.3.6.1.4.1.1751.2.18.1.6 | ||
| This is one of the two atm address prefix of this switch. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(13) | ||
| siteAtmAddrUser1 | 1.3.6.1.4.1.1751.2.18.1.7 | ||
| This is one of the two atm address user part of this switch. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(7) | ||
| siteRemoteMgrAddr1 | 1.3.6.1.4.1.1751.2.18.1.8 | ||
| remote manager IP Address, where TRAP will be sent to. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| siteRemoteMgrAddr2 | 1.3.6.1.4.1.1751.2.18.1.9 | ||
| remote manager IP Address, where TRAP will be sent to. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| siteRemoteMgrAddr3 | 1.3.6.1.4.1.1751.2.18.1.10 | ||
| remote manager IP Address, where TRAP will be sent to. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| siteRemoteMgrAddr4 | 1.3.6.1.4.1.1751.2.18.1.11 | ||
| remote manager IP Address, where TRAP will be sent to. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| siteRemoteMgrAddr5 | 1.3.6.1.4.1.1751.2.18.1.12 | ||
| remote manager IP Address, where TRAP will be sent to. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| siteMasterNodeAtmAddr1 | 1.3.6.1.4.1.1751.2.18.1.13 | ||
| Master node atm address, where TRAP will be sent to. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(20) | ||
| siteMasterNodeAtmAddr2 | 1.3.6.1.4.1.1751.2.18.1.14 | ||
| Master node atm address, where TRAP will be sent to. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(20) | ||
| siteEnhanceFeatures | 1.3.6.1.4.1.1751.2.18.1.15 | ||
| enhancement features capability - number consists of a sum to represent the following: 1: securedAtm 2: isdn 4: frameRelay | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| siteTrapDialOutFeature | 1.3.6.1.4.1.1751.2.18.1.16 | ||
| Enables the dialing out to a remote terminal or beeper for trap notification. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), dialTerminal(2), dialBeeper(3) | ||
| siteTrapDialOutPhoneNum | 1.3.6.1.4.1.1751.2.18.1.17 | ||
| Phone number of the terminal to dial when trap notifications are phoned out | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(20) | ||
| siteTrapDialOutBeeperData | 1.3.6.1.4.1.1751.2.18.1.18 | ||
| Data (phone digits) to send to beeper if the dialBeeper option is selected. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(20) | ||
| siteDateAndTime | 1.3.6.1.4.1.1751.2.18.1.19 | ||
| Current date and time: 11 octets octet# contents range ------ -------- ----- 1-2 year 0..65536 3 month 1..12 4 day 1..31 5 hour 0..23 6 minutes 0..59 7 seconds 0..60(60=leap second) 8 deci-seconds 0..9 9 direction from UTC '+'/'-' 10 hours from UTC 0..11 11 minutes from UTC 0..59 | |||
| OBJECT-TYPE | |||
| DateAndTime | |||
| siteSoftwareVersion | 1.3.6.1.4.1.1751.2.18.1.20 | ||
| Constant value representing the version number of the current software. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(15) | ||
| csTcpServerIpAddress | 1.3.6.1.4.1.1751.2.18.1.21 | ||
| The IP address of CS | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| csTcpServerPortNumber | 1.3.6.1.4.1.1751.2.18.1.22 | ||
| The Port Number used for communication with CS. NOTE: Port # 5000 and 6000 have been reservered for AC products. DO NOT USED THEM !!! | |||
| OBJECT-TYPE | |||
| INTEGER | 1025..65535 | ||
| keepAliveTimer | 1.3.6.1.4.1.1751.2.18.1.23 | ||
| keep alive timer can be set inbetween 0 and 999999999 | |||
| OBJECT-TYPE | |||
| INTEGER | 0..999999999 | ||
| inactiveTimer | 1.3.6.1.4.1.1751.2.18.1.24 | ||
| inactive timer can be set inbetween 0 and 999999999 | |||
| OBJECT-TYPE | |||
| INTEGER | 0..999999999 | ||
| siteMasterNodeAddrType1 | 1.3.6.1.4.1.1751.2.18.1.25 | ||
| Type of address specified for master node atm address, where TRAP will be sent to. | |||
| OBJECT-TYPE | |||
| INTEGER | nsap(1), e164(2), e164nsap(3) | ||
| siteMasterNodeAddrType2 | 1.3.6.1.4.1.1751.2.18.1.26 | ||
| Type of address specified for master node atm address, where TRAP will be sent to. | |||
| OBJECT-TYPE | |||
| INTEGER | nsap(1), e164(2), e164nsap(3) | ||
| inBandPrimaryIpAddress | 1.3.6.1.4.1.1751.2.18.1.27 | ||
| IP address of the switch when the switch is accessed over the primary in-band connection. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| inBandPrimaryIpMask | 1.3.6.1.4.1.1751.2.18.1.28 | ||
| IP address subnet mask of the primary in-band management IP address. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(4) | ||
| inBandBackupIpAddress | 1.3.6.1.4.1.1751.2.18.1.29 | ||
| IP address of the switch when the switch is accessed over the secondary in-band connection. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| inBandBackupIpMask | 1.3.6.1.4.1.1751.2.18.1.30 | ||
| IP address subnet mask of the secondary in-band management IP address. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(4) | ||
| inBandSvcConnectionsAllowed | 1.3.6.1.4.1.1751.2.18.1.31 | ||
| Flag indicating whether in-band management should be supported over SVCs. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmArpServer | 1.3.6.1.4.1.1751.2.18.1.32 | ||
| This flag indicates if this switch is an ATM ARP server. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmArpServerRemoteConnectionType | 1.3.6.1.4.1.1751.2.18.1.33 | ||
| When this switch is not the ATM ARP server, indicates whether the connection to the ATM ARP server uses SVCs or PVCs. | |||
| OBJECT-TYPE | |||
| INTEGER | svc(1), pvc(2) | ||
| atmArpServerRemoteAtmAddress | 1.3.6.1.4.1.1751.2.18.1.34 | ||
| The ATM address of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses SVCs. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(20) | ||
| atmArpServerRemoteAddrType | 1.3.6.1.4.1.1751.2.18.1.35 | ||
| The format of the ATM address of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses SVCs. | |||
| OBJECT-TYPE | |||
| INTEGER | nsap(1), e164(2), e164nsap(3) | ||
| atmArpServerRemoteIpAddress | 1.3.6.1.4.1.1751.2.18.1.36 | ||
| The IP address of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses PVCs. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| atmArpServerRemoteIpMask | 1.3.6.1.4.1.1751.2.18.1.37 | ||
| The IP address subnet mask of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses PVCs. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(4) | ||
| atmArpServerEncapsulation | 1.3.6.1.4.1.1751.2.18.1.38 | ||
| The type of encapsulation used for IP packets over ATM in in-band management. | |||
| OBJECT-TYPE | |||
| INTEGER | llc-snap(1) | ||
| siteFallbackSoftwareVersion | 1.3.6.1.4.1.1751.2.18.1.41 | ||
| Constant value representing the version number of the software to fallback to. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(15) | ||
| siteUpgradeSoftwareVersion | 1.3.6.1.4.1.1751.2.18.1.42 | ||
| Constant value representing the version number of the software to upgrade to. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(15) | ||
| siteSwitchIpAddr | 1.3.6.1.4.1.1751.2.18.1.43 | ||
| IP Address for communication with the switch, regardless of which cpu is primary. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| muxTcpType | 1.3.6.1.4.1.1751.2.18.1.44 | ||
| The type of mux TCP. | |||
| OBJECT-TYPE | |||
| INTEGER | server(1), client(2) | ||
| loopbackLocationID | 1.3.6.1.4.1.1751.2.18.1.45 | ||
| ID of the ATM Node where the loopback is to occur. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(16) | ||
| oamDebouncingPeriod | 1.3.6.1.4.1.1751.2.18.1.46 | ||
| Debouncing period in milli seconds for clearing AIS/RDI state. | |||
| OBJECT-TYPE | |||
| INTEGER | 1000..300000 | ||
| svcPointToPointCalls | 1.3.6.1.4.1.1751.2.18.1.47 | ||
| The total number of SVC point-to-point calls, both legs are SVCs. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| svcPointToMultiPointCalls | 1.3.6.1.4.1.1751.2.18.1.48 | ||
| The total number of SVC point-to-multipoint calls, both legs are SVCs. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| svcPointToMultiPointParties | 1.3.6.1.4.1.1751.2.18.1.49 | ||
| The total number of parties on SVC point-to-multipoint calls, both legs are SVCs. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| spvcCePointToPointCalls | 1.3.6.1.4.1.1751.2.18.1.50 | ||
| The total number of circuit emulation SPVC calls. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| spvcTePointToPointCalls | 1.3.6.1.4.1.1751.2.18.1.51 | ||
| The total number of terminal emulation SPVC calls. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| spvcAtmPointToPointCalls | 1.3.6.1.4.1.1751.2.18.1.52 | ||
| The total number of ATM SPVC calls. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cgApiCirEmCirEmPvcCalls | 1.3.6.1.4.1.1751.2.18.1.53 | ||
| The total number of circuit emulation to circuit emulation calls for Sapphire API. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cgApiCirEmAtmPvcCalls | 1.3.6.1.4.1.1751.2.18.1.54 | ||
| The total number of circuit emulation to ATM calls for Sapphire APIs | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cgApiAtmAtmPvcCalls | 1.3.6.1.4.1.1751.2.18.1.55 | ||
| The total number of ATM to ATM calls for Sapphire APIs | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cgApiPointToPointSvcCalls | 1.3.6.1.4.1.1751.2.18.1.56 | ||
| The total number of point-to-point SVC calls for Sapphire APIs | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cgApiPointToMultiPointSvcCalls | 1.3.6.1.4.1.1751.2.18.1.57 | ||
| The total number of point-to-multipoint SVC calls for Sapphire APIs | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cgApiPointToMultiPointParties | 1.3.6.1.4.1.1751.2.18.1.58 | ||
| The total number of parties for Sapphire APIs | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| callContrlResAllocApply | 1.3.6.1.4.1.1751.2.18.1.59 | ||
| 0 - not apply, 1 - apply the call control resouce allocation modification | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1 | ||
| callContrlResAllocUsage | 1.3.6.1.4.1.1751.2.18.1.60 | ||
| The percentage of memory usage for call control resource. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| siteFirmwarePatchNumber | 1.3.6.1.4.1.1751.2.18.1.61 | ||
| Constant value representing the patch number of the patch release. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| spvcActRestartAll | 1.3.6.1.4.1.1751.2.18.1.62 | ||
| Restart all ATM-to-ATM,CE-to-CE,TE-to-TE,FR-to-FR active unconnected spvc connections | |||
| OBJECT-TYPE | |||
| INTEGER | spvcActAtmRestartAll(1), spvcActCeRestartAll(2), spvcActTeRestartAll(3), spvcActFrRestartAll(4) | ||
| cgSvcCutThroughOption | 1.3.6.1.4.1.1751.2.18.1.63 | ||
| Cut Through option for SVC calls going to CG cgSvcAcImplicitCutThrough (1) - AC implicitly cuts through. cgSvcCgExplicitCutThrough (2) - CG sends explcit PATH_ETABLISH_REQ to request AC to cut through. | |||
| OBJECT-TYPE | |||
| INTEGER | cgSvcAcImplicitCutThrough(1), cgSvcCgExplicitCutThrough(2) | ||
| sgApiCirEmEndPoints | 1.3.6.1.4.1.1751.2.18.1.64 | ||
| The total number of circuit emulation endpoints for Sapphire API. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| sgApiAtmSvcEndPoints | 1.3.6.1.4.1.1751.2.18.1.65 | ||
| The total number of ATM SVC endpoints for Sapphire APIs | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| siteRemoteMgrSrcAddr1 | 1.3.6.1.4.1.1751.2.18.1.66 | ||
| This is the source IP address used in all traps sent to remote manager | |||
| OBJECT-TYPE | |||
| INTEGER | ethernet(1), ibm(2), interface(3) | ||
| siteRemoteMgrSrcAddr2 | 1.3.6.1.4.1.1751.2.18.1.67 | ||
| This is the source IP address used in all traps sent to remote manager | |||
| OBJECT-TYPE | |||
| INTEGER | ethernet(1), ibm(2), interface(3) | ||
| siteRemoteMgrSrcAddr3 | 1.3.6.1.4.1.1751.2.18.1.68 | ||
| This is the source IP address used in all traps sent to remote manager | |||
| OBJECT-TYPE | |||
| INTEGER | ethernet(1), ibm(2), interface(3) | ||
| siteRemoteMgrSrcAddr4 | 1.3.6.1.4.1.1751.2.18.1.69 | ||
| This is the source IP address used in all traps sent to remote manager | |||
| OBJECT-TYPE | |||
| INTEGER | ethernet(1), ibm(2), interface(3) | ||
| siteRemoteMgrSrcAddr5 | 1.3.6.1.4.1.1751.2.18.1.70 | ||
| This is the source IP address used in all traps sent to remote manager | |||
| OBJECT-TYPE | |||
| INTEGER | ethernet(1), ibm(2), interface(3) | ||
| spvcFrPointToPointCalls | 1.3.6.1.4.1.1751.2.18.1.71 | ||
| The total number of FR SPVC calls. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| inBandAppAtmAddress | 1.3.6.1.4.1.1751.2.18.1.72 | ||
| The ATM address of the inBand application | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(20) | ||
| inBandAppAtmAddrType | 1.3.6.1.4.1.1751.2.18.1.73 | ||
| The format of the ATM address of the inBand application | |||
| OBJECT-TYPE | |||
| INTEGER | nsap(1), e164(2), e164nsap(3) | ||
| atmArpServer2RemoteAtmAddress | 1.3.6.1.4.1.1751.2.18.1.74 | ||
| The ATM address of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses SVCs. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(20) | ||
| atmArpServer2RemoteAddrType | 1.3.6.1.4.1.1751.2.18.1.75 | ||
| The format of the ATM address of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses SVCs. | |||
| OBJECT-TYPE | |||
| INTEGER | nsap(1), e164(2), e164nsap(3) | ||
| tasmMaxAnnceDiskSpace | 1.3.6.1.4.1.1751.2.18.1.76 | ||
| Specifies the maximum disk size in MBytes reserved for compressed announcements on the CPU hard disk. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..36 | ||
| tasmMaxAnnce | 1.3.6.1.4.1.1751.2.18.1.77 | ||
| Specifies the maximum number of tones and announcements that can be played simultaneously. This will depend on the number of control blocks allocated for collecting digits and for line tests as the memory comes from the same pool. The tasmControlBlockResAllocUsage field will be updated to indicate this. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..10000 | ||
| tasmMaxStdTones | 1.3.6.1.4.1.1751.2.18.1.78 | ||
| Specifies the maximum number of tones that can be played simutaneously. This field has been obsoleted for optimisation of resources. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..10 | ||
| tasmMemoryAction | 1.3.6.1.4.1.1751.2.18.1.79 | ||
| Specifies the action to be performed on the memory in the TASM card used for storing announcements. | |||
| OBJECT-TYPE | |||
| INTEGER | re-initialize(1) | ||
| tasAnnceTable | 1.3.6.1.4.1.1751.2.18.1.80 | ||
| Table of announcements for the Tone Announcement server . | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| TasAnnceEntry | |||
| tasAnnceEntry | 1.3.6.1.4.1.1751.2.18.1.80.1 | ||
| Row definition for Tone Announcement server table announcement entries. | |||
| OBJECT-TYPE | |||
| TasAnnceEntry | |||
| tasAnnceId | 1.3.6.1.4.1.1751.2.18.1.80.1.1 | ||
| Announcement ID. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..100 | ||
| tasAnnceType | 1.3.6.1.4.1.1751.2.18.1.80.1.2 | ||
| The type of this announcement: voice indicates it is a pure voice announcement file. toneVoice indicates it is a file with tones at the beginning followed by voice. userTones indicates it is a file with purely user generated tones. music indicates it is a file with pure music. musicVoice indicates it is a file with music at the beginning followed by voice. toneMusic indicates it is a file with tones at the beginning followed by music. | |||
| OBJECT-TYPE | |||
| INTEGER | voice(1), toneVoice(2), userTones(3), music(4), musicVoice(5), toneMusic(6) | ||
| tasAnnceCmprsType | 1.3.6.1.4.1.1751.2.18.1.80.1.3 | ||
| The type of compression used for storing this announcement: compress8k indicates 8k compression algorithm should be used. compress16k indicates 16k compression algorithm should be used. compress32k indicates 32k compression algorithm should be used. | |||
| OBJECT-TYPE | |||
| INTEGER | uncompressed(1), compress8k(2), compress16k(3), compress32k(4) | ||
| tasAnnceValid | 1.3.6.1.4.1.1751.2.18.1.80.1.4 | ||
| Indicates the condition of this announcement, whether it is good, it is stored using an older compression algorithm, or it is corrupted. | |||
| OBJECT-TYPE | |||
| INTEGER | good(1), olderVersion(2), corrupted(3) | ||
| tasAnnceDescription | 1.3.6.1.4.1.1751.2.18.1.80.1.5 | ||
| Description for this announcement. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(255) | ||
| tasToneConfigTable | 1.3.6.1.4.1.1751.2.18.1.81 | ||
| Table of standard physical tone attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| TasToneConfigEntry | |||
| tasToneConfigEntry | 1.3.6.1.4.1.1751.2.18.1.81.1 | ||
| Row definition for TASM announcement entries. | |||
| OBJECT-TYPE | |||
| TasToneConfigEntry | |||
| tasToneId | 1.3.6.1.4.1.1751.2.18.1.81.1.1 | ||
| Tone ID. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..10 | ||
| tasToneType | 1.3.6.1.4.1.1751.2.18.1.81.1.2 | ||
| The type of this standard tone. | |||
| OBJECT-TYPE | |||
| INTEGER | dialTone(1), reorderTone(2), sitTone(3) | ||
| tasToneFirstFreq | 1.3.6.1.4.1.1751.2.18.1.81.1.3 | ||
| The first frequency value for this tone. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| tasToneSecondFreq | 1.3.6.1.4.1.1751.2.18.1.81.1.4 | ||
| The second frequency value for this tone. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| tasToneThirdFreq | 1.3.6.1.4.1.1751.2.18.1.81.1.5 | ||
| The third frequency value for this tone. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| tasToneOnTime | 1.3.6.1.4.1.1751.2.18.1.81.1.6 | ||
| The on time in the tone duty cycle. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| tasToneOffTime | 1.3.6.1.4.1.1751.2.18.1.81.1.7 | ||
| The off time in the tone duty cycle. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| tasToneLevel | 1.3.6.1.4.1.1751.2.18.1.81.1.8 | ||
| The level of this tone in dBm. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmArpServerAtmAddr | 1.3.6.1.4.1.1751.2.18.1.82 | ||
| The ATM address of the ATM ARP server when this switch is configured as the ATM ARP server . | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(20) | ||
| atmArpServerAddrType | 1.3.6.1.4.1.1751.2.18.1.83 | ||
| The format of the ATM address of the ATM ARP server when this switch is configured as the ATM ARP server. | |||
| OBJECT-TYPE | |||
| INTEGER | nsap(1), e164(2), e164nsap(3) | ||
| spvcPointToMultiPointCalls | 1.3.6.1.4.1.1751.2.18.1.84 | ||
| The total number of SPVC point-to-multipoint calls | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| spvcPointToMultiPointParties | 1.3.6.1.4.1.1751.2.18.1.85 | ||
| The total number of parties on SPVC point-to-multipoint calls. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| consoleIPAddr1 | 1.3.6.1.4.1.1751.2.18.1.86 | ||
| console IP Address, where TRAP will be sent. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| consoleIPAddr2 | 1.3.6.1.4.1.1751.2.18.1.87 | ||
| console IP Address, where TRAP will be sent. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| consoleIPAddr3 | 1.3.6.1.4.1.1751.2.18.1.88 | ||
| console IP Address, where TRAP will be sent. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| consolePort1 | 1.3.6.1.4.1.1751.2.18.1.89 | ||
| port number on host where TRAP will be sent | |||
| OBJECT-TYPE | |||
| INTEGER | 1..32767 | ||
| consolePort2 | 1.3.6.1.4.1.1751.2.18.1.90 | ||
| port number on host where TRAP will be sent | |||
| OBJECT-TYPE | |||
| INTEGER | 1..32767 | ||
| consolePort3 | 1.3.6.1.4.1.1751.2.18.1.91 | ||
| port number on host where TRAP will be sent | |||
| OBJECT-TYPE | |||
| INTEGER | 1..32767 | ||
| featureTable | 1.3.6.1.4.1.1751.2.18.1.92 | ||
| Table of features to be turned on/off | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| FeatureEntry | |||
| featureEntry | 1.3.6.1.4.1.1751.2.18.1.92.1 | ||
| Row definition for feature table | |||
| OBJECT-TYPE | |||
| FeatureEntry | |||
| featureId | 1.3.6.1.4.1.1751.2.18.1.92.1.1 | ||
| feature ID. | |||
| OBJECT-TYPE | |||
| INTEGER | pnni(1), gr303(2), vipr(3), h248(4) | ||
| featureStaticMem | 1.3.6.1.4.1.1751.2.18.1.92.1.2 | ||
| Minimum memory required to run this feature | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| featureDesiredStatus | 1.3.6.1.4.1.1751.2.18.1.92.1.3 | ||
| To enable / disable this feature | |||
| OBJECT-TYPE | |||
| INTEGER | enable(1), disable(2) | ||
| featureCurrentStatus | 1.3.6.1.4.1.1751.2.18.1.92.1.4 | ||
| This feature is enabled / disabled | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| mediaGatewayControlType | 1.3.6.1.4.1.1751.2.18.1.93 | ||
| Choose to use H.248 protocol or sapphire protocol | |||
| OBJECT-TYPE | |||
| INTEGER | sapphire(1), h248(2) | ||
| dspResourceTable | 1.3.6.1.4.1.1751.2.18.1.94 | ||
| Table of DSP resource usage for the whole system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DspResourceEntry | |||
| dspResourceEntry | 1.3.6.1.4.1.1751.2.18.1.94.1 | ||
| Row definition for DSP resource usage table entries. | |||
| OBJECT-TYPE | |||
| DspResourceEntry | |||
| dspResourceId | 1.3.6.1.4.1.1751.2.18.1.94.1.1 | ||
| DSP resource type enumerations. The algoSets describe the mode of the DSP card. Each mode corresponds to a set of algorithms supported by the IO card. Aal modes describe the aal type used. algoSet1-aal2-non-multiplexed: resource type for algoSet1 DSP mode and non-multiplexed aal2 AAL mode. algoSet1-aal2-std : resource type for algoSet1 DSP mode and standard aal2 AAL mode. algoSet2-aal2-non-multiplexed: resource type for algoSet2 DSP mode and non-multiplexed aal2 AAL mode.aal2 AAL mode. algoSet2-aal2-std: resource type for algoSet2 DSP mode and standard aal2 AAL mode. algoSet3-aal2-non-multiplexed: resource type for algoSet3 DSP mode and non-multiplexed aal2 AAL mode. algoSet3-aal2-std: resource type for algoSet3 DSP mode and standard aal2 AAL mode. algoSet5-aal1: resource type for algoSet5 DSP mode and aal1 AAL mode. algoSet6-aal2-std: resource type for algoSet6 DSP mode and standard aal2 AAL mode. tone-annce-cas: resource type for the tone announcement interface and CAS mode of the TASM card. tone-annce-tas: resource type for the tone announcement interface and TAS mode of the TASM card. | |||
| OBJECT-TYPE | |||
| INTEGER | algoSet1-aal2-non-multiplexed(1), algoSet1-aal2-std(2), algoSet2-aal2-non-multiplexed(3), algoSet2-aal2-std(4), algoSet3-aal2-non-multiplexed(5), algoSet3-aal2-std(6), algoSet5-aal1(7), algoSet6-aal2-std(8), tone-annce-cas(9), tone-annce-tas(10) | ||
| dspResourceAvail | 1.3.6.1.4.1.1751.2.18.1.94.1.2 | ||
| The available DSP resource counts how many connections can be made using this available DSP resource type in the system. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dspResourceUsed | 1.3.6.1.4.1.1751.2.18.1.94.1.3 | ||
| The used DSP resource counts how many connections are already made using this available DSP resource type in the system. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dspResourceUsedFailed | 1.3.6.1.4.1.1751.2.18.1.94.1.4 | ||
| The used but failed DSP resource counts how many connections are already made using currently failed DSP resource type in the system. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dspResourceAvailFailed | 1.3.6.1.4.1.1751.2.18.1.94.1.5 | ||
| The available but failed DSP resource counts how many connections can be made if using currently failed DSP resource type in the system. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| tasmMaxDigitControlBlocks | 1.3.6.1.4.1.1751.2.18.1.95 | ||
| Specifies the maximum number of digit collection that can be initiated simultaneously. This will depend on the number of control blocks allocated for playing tones and announcements and for line tests as the memory comes from the same pool. The tasmControlBlockResAllocUsage field will be updated to indicate this . | |||
| OBJECT-TYPE | |||
| INTEGER | 1..10000 | ||
| tasmMaxTestControlBlocks | 1.3.6.1.4.1.1751.2.18.1.96 | ||
| Specifies the maximum number of TDM line tests that can be initiated simultaneously. This will depend on the number of control blocks allocated for playing tones and announcements and for digit collection as the memory comes from the same pool. The tasmControlBlockResAllocUsage field will be updated to indicate this. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..10000 | ||
| tasmMaxMemResvd | 1.3.6.1.4.1.1751.2.18.1.97 | ||
| Specifies the maximum amount of memory in megabytes reserved for TASM. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| tasmControlBlockResAllocUsage | 1.3.6.1.4.1.1751.2.18.1.98 | ||
| The percentage of memory usage for tones, announcements, digit collection and line tests control blocks. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| tasmAnnceCacheMemResAllocUsage | 1.3.6.1.4.1.1751.2.18.1.99 | ||
| The percentage of memory usage for caching announcements in memory. Everytime an announcement is compressed this field will be updated to reflect the cache memory that will be taken up by this announcement. Once this field shows a 100 percent usage it is an indication to the user that any additional announcement will cause the system to thrash as it clears an announcement in cache to make room for the new announcement. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| siteAlternateGatewayAddr | 1.3.6.1.4.1.1751.2.18.1.100 | ||
| Alternate ip address of gateway to access the site (switch),Can be used only over the InBand PVC connection when the OAM is enabled on InBand PVCs | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| ipThrottlingConfig | 1.3.6.1.4.1.1751.2.18.1.101 | ||
| OBJECT IDENTIFIER | |||
| ipThrottlingFeatureStatus | 1.3.6.1.4.1.1751.2.18.1.101.1 | ||
| CPU card IP throttling feature: off/on | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(0), enabled(1) | ||
| ipThrottlingAllowedInFrameRate | 1.3.6.1.4.1.1751.2.18.1.101.2 | ||
| CPU card IP throttling: allowed input frames per second | |||
| OBJECT-TYPE | |||
| INTEGER | 1..20000 | ||
| ipThrottlingLeakyBucketSize | 1.3.6.1.4.1.1751.2.18.1.101.3 | ||
| CPU card IP throttling: the size of leaky bucket | |||
| OBJECT-TYPE | |||
| INTEGER | 1..20000 | ||
| ipThrottlingStatsOdometerTimer | 1.3.6.1.4.1.1751.2.18.1.101.4 | ||
| CPU card IP throttling: Number of seconds since odometer was reset. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipThrottlingStatsOdometerReset | 1.3.6.1.4.1.1751.2.18.1.101.5 | ||
| CPU card IP throttling: Odometer reset button. | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| ipThrottlingInPackets | 1.3.6.1.4.1.1751.2.18.1.101.6 | ||
| CPU card IP throttling: the total number of input packets from both Ethernet port and In-band-mgmt of the CPU card. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipThrottlingInPacketsPassedEi | 1.3.6.1.4.1.1751.2.18.1.101.7 | ||
| CPU card IP throttling: the number of input packets passed through the Ethernet port of the CPU card. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipThrottlingInPacketsDroppedEi | 1.3.6.1.4.1.1751.2.18.1.101.8 | ||
| CPU card IP throttling: the number of input packets dropped from the Ethernet port of the CPU card. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipThrottlingInPacketsPassedIBM | 1.3.6.1.4.1.1751.2.18.1.101.9 | ||
| CPU card IP throttling: the number of input packets passed from the In-Band-Management of the CPU card. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipThrottlingInPacketsDroppedIBM | 1.3.6.1.4.1.1751.2.18.1.101.10 | ||
| CPU card IP throttling: the number of input packets dropped from the In-Band-Management of the CPU card. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| csSapphireInterfaceAddress | 1.3.6.1.4.1.1751.2.18.1.102 | ||
| The IP address to be specified as the source address in the TCP connect message that is sent to the SoftSwitch running as server and PSAX running as client. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| trapActivationTable | 1.3.6.1.4.1.1751.2.18.1.103 | ||
| Table of traps be turned on/off | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| TrapActivationEntry | |||
| trapActivationEntry | 1.3.6.1.4.1.1751.2.18.1.103.1 | ||
| Row definition for trapActivation table | |||
| OBJECT-TYPE | |||
| TrapActivationEntry | |||
| trapGroupId | 1.3.6.1.4.1.1751.2.18.1.103.1.1 | ||
| trap group ID. | |||
| OBJECT-TYPE | |||
| INTEGER | systemEvents(1), moduleEvents(2), interfaceEvents(3), connectionEvents(4) | ||
| trapIndex | 1.3.6.1.4.1.1751.2.18.1.103.1.2 | ||
| trap index in each group. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| trapActivationStatus | 1.3.6.1.4.1.1751.2.18.1.103.1.3 | ||
| activated: trap message activated. deactivated: trap message deactivated. permanently-activated: trap message can not be deactivated. | |||
| OBJECT-TYPE | |||
| INTEGER | activated(1), deactivated(2), permanently-activated(3) | ||
| trapNames | 1.3.6.1.4.1.1751.2.18.1.103.1.4 | ||
| Name of the trap | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(50) | ||
| resetAction | 1.3.6.1.4.1.1751.2.18.1.103.1.5 | ||
| set-all-active: set all trap active one group. set-all-deactive: set all trap deactive in a group. | |||
| OBJECT-TYPE | |||
| INTEGER | set-all-active(1), set-all-deactive(2) | ||
| spvcGlobalPriorityScheme | 1.3.6.1.4.1.1751.2.18.1.104 | ||
| Flag indicating whether priority scheme should be supported across SPVCs and SPVC-trunks. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| spvcPriorityScheme | 1.3.6.1.4.1.1751.2.18.1.105 | ||
| Flag indicating whether priority scheme should be supported in SPVCs. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| spvcTrunkingPriorityScheme | 1.3.6.1.4.1.1751.2.18.1.106 | ||
| Flag indicating whether priority scheme should be supported in SPVC-trunks. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmTrunkVccs | 1.3.6.1.4.1.1751.2.18.1.107 | ||
| The total number of ATM Trunk VCCs (including SigVccs and Bearer Vccs). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkNarrowBandCalls | 1.3.6.1.4.1.1751.2.18.1.108 | ||
| The total number of ATM Trunking Narrow Band Calls supported | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dspResourceFeatureConfig | 1.3.6.1.4.1.1751.2.18.1.109 | ||
| OBJECT IDENTIFIER | |||
| dspReroutingFeature | 1.3.6.1.4.1.1751.2.18.1.109.1 | ||
| Dsp2 Rerouting Feature.This is used to enable or disable rerouting of connections when a dsp chip or card fails. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), auto-rerouting-enabled(2) | ||
| equipConfig | 1.3.6.1.4.1.1751.2.18.2 | ||
| OBJECT IDENTIFIER | |||
| cardTable | 1.3.6.1.4.1.1751.2.18.2.1 | ||
| Table of card configuration data | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| CardEntry | |||
| cardEntry | 1.3.6.1.4.1.1751.2.18.2.1.1 | ||
| Row definition for ac120 card | |||
| OBJECT-TYPE | |||
| CardEntry | |||
| cardSlot | 1.3.6.1.4.1.1751.2.18.2.1.1.1 | ||
| Physical slot location. Valid range is a number between 1 and 24. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..24 | ||
| cardType | 1.3.6.1.4.1.1751.2.18.2.1.1.2 | ||
| Type of card in a physical slot. A specific type of card is associated with each number. none(1) no board present taxi(2) Taxi oC-3c(3) OC3 dS3-ATM(4) DS3 ATM dS1-CE(5) DS1 circuit emulation dS1-ATM(6) DS1 ATM e1-CE(7) E1 circuit emulation e3-ATM(8) E3 ATM highSpeed(9) High Speed Serial mSerial(10) Multi Serial dSP1(11) DSP tWStation(12) Two Wire Station tWOffice(13) Two Wire Office cPU(14) Central Processor Unit stratum(15) Stratum pwrSupply(16) Power Supply protectionCard(17) protection card e1-ATM(18) E1 ATM ethernet(19) Ethernet enhDS1(20) Enhanced DS1 enhE1(21) Enhanced E1 oC-3cMMAQ(22) OC3 Multimode Aqueman oC-3cMMTS(23) OC3 Multimode Traffic Shaping oC-3cSMAQ(24) OC3 Singlemode Aqueman oC-3cSMTS(25) OC3 Singlemode Traffic Shaping sTM-1SMAQ(26) STM1 Singlemode Aqueman sTM-1SMTS(27) STM1 Singlemode Traffic Shaping sTM-1MMAQ(28) STM1 Multimode Aqueman sTM-1MMTS(29) STM1 Multimode Traffic Shaping dS3-FR(30) DS3 Frame Relay dSP2A(31) DSP2 card revision 2A dS1-IMA(32) DS1 Inverse Multiplexing over ATM (IMA) I/O card e1-IMA(33) E1 IMA alarm(34) alarm card dSP2B(35) DSP card revision 2B aps-OC-3cSM(36) Automatic Protection Switching OC3 Single Mode aps-OC-3cMM(37) Automatic Protection Switching OC3 Multi Mode msp-STM-1SM(38) Multi Switch Protection STM1 Singemode msp-STM-1MM(39) Multi Switch Protection STM1 Multimode cH-DS3(40) Channelized DS3 cH-STS1(41) Channelized STS1 rT-S(42) Route Server cC-Server(43) Continuity Check Server hD-E1(44) High Density E1 hD-DS1(45) High Density DS1 dS3-IMA(46) DS3 IMA dSP2C(47) DSP card revision 2C tasm(48) Tone Announcement Service Module mD-DS1(49) Medium Density DS1 quadSerial(50) Quad Serial mD-DS1-IMA(51) Medium Density DS1 IMA mD-E1-IMA(52) Medium Density E1 IMA hD-DS1-IMA(53) High Density DS1 IMA hD-E1-IMA(54) High Density E1 IMA chDS3STS1-3P(55) 3-port channelized DS3 STS1 unstDS3E3-3P(56) 3-port unstructured DS3 E3 dS3E3-ATM-3P(57) 3-port DS3 E3 ATM oC12c-STM4-MM(58) OC12 STM4 Multimode oC12c-STM4-SM(59) OC12 STM4 Singlemode dSP2D(60) DSP card revision 2D ethernet-4P(61) 4-port Ethernet chDS3STS1-3P-Prot(62) 3-port channelized DS3 STS1 protection alarm-fan(63) alarm fan card dS1-Nx64CAS(64) DS1 card supporting N x 64 CAS | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), taxi(2), oC-3c(3), dS3-ATM(4), dS1-CE(5), dS1-ATM(6), e1-CE(7), e3-ATM(8), highSpeed(9), mSerial(10), dSP1(11), tWStation(12), tWOffice(13), cPU(14), stratum(15), pwrSupply(16), protectionCard(17), e1-ATM(18), ethernet(19), enhDS1(20), enhE1(21), oC-3cMMAQ(22), oC-3cMMTS(23), oC-3cSMAQ(24), oC-3cSMTS(25), sTM-1SMAQ(26), sTM-1SMTS(27), sTM-1MMAQ(28), sTM-1MMTS(29), dS3-FR(30), dSP2A(31), dS1-IMA(32), e1-IMA(33), alarm(34), dSP2B(35), aps-OC-3cSM(36), aps-OC-3cMM(37), msp-STM-1SM(38), msp-STM-1MM(39), cH-DS3(40), cH-STS1(41), rT-S(42), cC-Server(43), hD-E1(44), hD-DS1(45), dS3-IMA(46), dSP2C(47), tasm(48), mD-DS1(49), quadSerial(50), mD-DS1-IMA(51), mD-E1-IMA(52), hD-DS1-IMA(53), hD-E1-IMA(54), chDS3STS1-3P(55), unstDS3E3-3P(56), dS3E3-ATM-3P(57), oC12c-STM4-MM(58), oC12c-STM4-SM(59), dSP2D(60), ethernet-4P(61), chDS3STS1-3P-Prot(62), alarm-fan(63), dS1-Nx64CAS(64) | ||
| cardProtectionStatus | 1.3.6.1.4.1.1751.2.18.2.1.1.3 | ||
| Current protection status of the card: none if the card is un-protected; protected if it is under the protection of another card; wrongType if the card types of protection card and protected card are different. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), protected(2), wrongType(3) | ||
| cardOperStatus | 1.3.6.1.4.1.1751.2.18.2.1.1.4 | ||
| Current operational status of the card. For I/O card, it is primary if configured, it is unknown if unconfigured, or removed. For CPU, it is primary if the CPU is master CPU, or standby if the CPU is slave CPU. | |||
| OBJECT-TYPE | |||
| INTEGER | primary(1), standby(2), unknown(3) | ||
| cardAdminStatus | 1.3.6.1.4.1.1751.2.18.2.1.1.5 | ||
| administrative status | |||
| OBJECT-TYPE | |||
| INTEGER | switchProtection(1) | ||
| cardAlarmStatus | 1.3.6.1.4.1.1751.2.18.2.1.1.6 | ||
| last alarm occurred | |||
| OBJECT-TYPE | |||
| INTEGER | noAlarm(1), wrongCardType(2), lineFailed(3), cardRemoved(4), referenceClockFailed(5), compositeClockFailed(6), overload(7), plus5vFailed(8), plus120vFailed(9), minus48vFailed(10), unknownAlarm(11), completeClockFailed(12), backplaneCircuitryFailed(13), powerFailed(14), inputPortClkFailed(15) | ||
| cardCleiCode | 1.3.6.1.4.1.1751.2.18.2.1.1.7 | ||
| CLEI code | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(10) | ||
| cardRevision | 1.3.6.1.4.1.1751.2.18.2.1.1.8 | ||
| Card Revision number | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cardSerialNumber | 1.3.6.1.4.1.1751.2.18.2.1.1.9 | ||
| Serial Number | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(12) | ||
| cardOperatingMode | 1.3.6.1.4.1.1751.2.18.2.1.1.10 | ||
| Mode of operation for a card. This is applicable to those card types which can be configured in a dual mode. e.g. unstDS3E3-3P can be operational as either a 3 port DS3 or E3 card. All ports on the card will be of the same type depending on the card's operating mode. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), dS3(2), e3(3), sTS1e(4), oC12(5), sTM4(6) | ||
| protectionConfigMode | 1.3.6.1.4.1.1751.2.18.2.1.1.11 | ||
| Protection Configuration Mode of a Card unprotected: Card is not in protection or protected state protection: Card is in protection state working: Card is in protected/working state and this state is read only and cannot be set by the user | |||
| OBJECT-TYPE | |||
| INTEGER | unprotected(1), protection(2), working(3) | ||
| protectionStatus | 1.3.6.1.4.1.1751.2.18.2.1.1.12 | ||
| Protection Status of a card. Inservice and OutofService indicates if the card has failed or still operational. Active or Standby state indicates if it is carrying active traffic or not. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), inservice-Active(2), inservice-Standby(3), outOfService-Active(4), outOfService-Standby(5) | ||
| protectionSlot | 1.3.6.1.4.1.1751.2.18.2.1.1.13 | ||
| If Protection Config Mode is Working then this field gives the protection slot. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..15 | ||
| taxiPortConfigTable | 1.3.6.1.4.1.1751.2.18.2.2 | ||
| Table of common physical Port attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| TaxiPortConfigEntry | |||
| taxiPortConfigEntry | 1.3.6.1.4.1.1751.2.18.2.2.1 | ||
| Row definition for common physical port attributes | |||
| OBJECT-TYPE | |||
| TaxiPortConfigEntry | |||
| taxiPortId | 1.3.6.1.4.1.1751.2.18.2.2.1.1 | ||
| interface index - SSPP | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| taxiPortType | 1.3.6.1.4.1.1751.2.18.2.2.1.2 | ||
| taxi type | |||
| OBJECT-TYPE | |||
| INTEGER | taxi100(1), taxi140(2) | ||
| taxiLineStatus | 1.3.6.1.4.1.1751.2.18.2.2.1.3 | ||
| taxi line status: 1: NoAlarm 2: Loss of Signal | |||
| OBJECT-TYPE | |||
| INTEGER | 1..2 | ||
| taxiOutputTransferRate | 1.3.6.1.4.1.1751.2.18.2.2.1.4 | ||
| User selectable parameter which allows the outgoing rate of the port to be reduced to 50% taxi, halfRate, only on AQueMan. | |||
| OBJECT-TYPE | |||
| INTEGER | fullRate(1), halfRate(2) | ||
| ds3PortConfigTable | 1.3.6.1.4.1.1751.2.18.2.3 | ||
| Table of ds3 specific port attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Ds3PortConfigEntry | |||
| ds3PortConfigEntry | 1.3.6.1.4.1.1751.2.18.2.3.1 | ||
| Row definition for ds3 specific port attributes | |||
| OBJECT-TYPE | |||
| Ds3PortConfigEntry | |||
| ds3PortId | 1.3.6.1.4.1.1751.2.18.2.3.1.1 | ||
| slot/port: SSPP | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ds3LineType | 1.3.6.1.4.1.1751.2.18.2.3.1.2 | ||
| This variable indicates the variety of DS3 C-bit implementing this interface. The type of interface affects the interpretation of the usage and error statistics. The rate of DS3 is 44.736 Mbps. The dsx3ClearChannel value means that the C-bits are not used except for sending/receiving AIS. The values, in sequence, describe: TITLE: SPECIFICATION: dsx3CbitParity ANSI T1.107a-1989 dsx3ClearChannel ANSI T1.102-1987. | |||
| OBJECT-TYPE | |||
| INTEGER | cbitParity(1), clearChannel(2), m13(3), m23(4) | ||
| ds3LineCoding | 1.3.6.1.4.1.1751.2.18.2.3.1.3 | ||
| This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. ds3B3ZS refers to the use of specified patterns of normal bits and bipolar violations which are used to replace sequences of zero bits of a specified length. | |||
| OBJECT-TYPE | |||
| INTEGER | b3zs(1) | ||
| ds3LoopbackConfig | 1.3.6.1.4.1.1751.2.18.2.3.1.4 | ||
| This variable represents the loopback configuration of the DS3 interface. See above diagrams for explanations of loops. | |||
| OBJECT-TYPE | |||
| INTEGER | noLoop(1), localLoop(2), lineLoop(3), payloadLoop(4) | ||
| ds3TransmitClockSource | 1.3.6.1.4.1.1751.2.18.2.3.1.5 | ||
| The source of Tranmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used. 'cardFreeRun' indicates that a local oscillator on the I/O card is used as the transmit clock. 'adaptiveTiming' indicates that the adaptive clocking mechanism is used | |||
| OBJECT-TYPE | |||
| INTEGER | loopTiming(1), localTiming(2), cardFreeRun(3), adaptiveTiming(4) | ||
| ds3LineStatus | 1.3.6.1.4.1.1751.2.18.2.3.1.6 | ||
| ds3 line status: 1: dsx3NoAlarm: No alarm present 2: dsx3RcvRAIFailure: Receiving Yellow/Remote Alarm Indication 4: dsx3XmitRAIAlarm: Transmitting Yellow/Remote Alarm Indication 8: dsx3RcvAIS: Receiving AIS failure state 16: dsx3XmitAIS: Transmitting AIS failure statue 32: dsx3LOF: Receiving LOF failure state 64: dsx3LOS: Reveiving LOS failure state 128: dsx3LoopbackState: Looping the received signal 256: dsx3RcvTestCode: Receiving a Test Pattern 512: dsx3OtherFailure: any line status not defined 1024: dsx3RcvRmtAIS: 2048: dsx3RcvRmtOOF: 4096: dsx3RcvRmtLOS: 8192: dsx3RcvRmtIdle: 16384: dsx3RmtLoopback: Far end remote loopback | |||
| OBJECT-TYPE | |||
| INTEGER | 1..32767 | ||
| ds3LineBuildOut | 1.3.6.1.4.1.1751.2.18.2.3.1.7 | ||
| ds3 line build out | |||
| OBJECT-TYPE | |||
| INTEGER | short(1), long(2) | ||
| ds3LineScramble | 1.3.6.1.4.1.1751.2.18.2.3.1.8 | ||
| ds3 line scramble | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| ds3CellMapping | 1.3.6.1.4.1.1751.2.18.2.3.1.9 | ||
| ds3 cell mapping method | |||
| OBJECT-TYPE | |||
| INTEGER | plcp(1), directMapping(2) | ||
| ds3SendCode | 1.3.6.1.4.1.1751.2.18.2.3.1.10 | ||
| This variable indicates what type of code is being sent across the ds3 interface by the device. The values mean: 'noCode' - sending looped or normal data 'lineLoopCode' - sending a request for a line loopback 'deactivateCode' - sending a loopback deactivation request 'testPattern' - sending a test pattern | |||
| OBJECT-TYPE | |||
| INTEGER | noCode(1), lineLoopCode(2), deactivateCode(3), testPattern(4) | ||
| ds3OutputTxRate | 1.3.6.1.4.1.1751.2.18.2.3.1.11 | ||
| The ability to adjust the bandwidth of DS3 in tx direction. The adjustable DS3 bandwidth will support 1% increments. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..100 | ||
| msPortConfigTable | 1.3.6.1.4.1.1751.2.18.2.4 | ||
| Table of multi-serial card's port attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MsPortConfigEntry | |||
| msPortConfigEntry | 1.3.6.1.4.1.1751.2.18.2.4.1 | ||
| Row definition for multi-serial port attributes | |||
| OBJECT-TYPE | |||
| MsPortConfigEntry | |||
| msPortId | 1.3.6.1.4.1.1751.2.18.2.4.1.1 | ||
| slot/port: SSPP | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| msLineCoding | 1.3.6.1.4.1.1751.2.18.2.4.1.2 | ||
| Line Coding. | |||
| OBJECT-TYPE | |||
| INTEGER | nrz(1) | ||
| msBaudRate | 1.3.6.1.4.1.1751.2.18.2.4.1.3 | ||
| baud rate is determined by multiplying this number by the msBaudRateMultiplier | |||
| OBJECT-TYPE | |||
| INTEGER | baud300(1), baud600(2), baud900(3), baud1200(4), baud1800(5), baud2400(6), baud3600(7), baud4800(8), baud7200(9), baud9600(10), baud14400(11), baud19200(12), baud28800(13), baud38400(14), baud57600(15), baud76800(16), baud115200(17), baud16k(18), baud32k(19), baud56k(20), baud64k(21), baud112k(22), baud128k(23), baud168k(24), baud192k(25), baud224k(26), baud256k(27), baud280k(28), baud320k(29), baud336k(30), baud384k(31), baud392k(32), baud448k(33), baud504k(34), baud512k(35), baud560k(36), baud576k(37), baud616k(38), baud640k(39), baud672k(40), baud704k(41), baud728k(42), baud768k(43), baud784k(44), baud832k(45), baud840k(46), baud896k(47), baud952k(48), baud960k(49), baud1008k(50), baud1024k(51), baud1064k(52), baud1088k(53), baud1120k(54), baud1152k(55), baud1176k(56), baud1216k(57), baud1232k(58), baud1280k(59), baud1288k(60), baud1344k(61), baud1400k(62), baud1408k(63), baud1456k(64), baud1472k(65), baud1512k(66), baud1536k(67), baud1568k(68), baud1600k(69), baud1624k(70), baud1664k(71), baud1680k(72), baud1728k(73), baud1736k(74), baud1792k(75), baud1856k(76), baud1920k(77), baud1984k(78), baud2048k(79), baud75(80), baud1848k(81), baud1904k(82), baud1960k(83), baud2016k(84), baud2072k(85), baud2112k(86), baud2128k(87), baud2176k(88), baud2184k(89), baud2240k(90), baud2296k(91), baud2304k(92), baud2352k(93), baud2368k(94), baud2408k(95), baud2432k(96), baud2464k(97), baud2496k(98), baud2520k(99), baud2560k(100), baud2576k(101), baud2624k(102), baud2632k(103), baud2688k(104), baud2744k(105), baud2752k(106), baud2800k(107), baud2816k(108), baud2856k(109), baud2880k(110), baud2912k(111), baud2944k(112), baud2968k(113), baud3008k(114), baud3024k(115), baud3072k(116), baud3080k(117), baud3136k(118), baud3192k(119), baud3200k(120), baud3248k(121), baud3264k(122), baud3304k(123), baud3328k(124), baud3360k(125), baud3392k(126), baud3416k(127), baud3456k(128), baud3472k(129), baud3520k(130), baud3528k(131), baud3584k(132), baud3640k(133), baud3648k(134), baud3696k(135), baud3712k(136), baud3752k(137), baud3776k(138), baud3808k(139), baud3840k(140), baud3864k(141), baud3904k(142), baud3920k(143), baud3968k(144), baud3976k(145), baud4032k(146), baud4088k(147), baud4096k(148), baud4144k(149), baud4160k(150), baud4200k(151), baud4224k(152), baud4256k(153), baud4288k(154), baud4312k(155), baud4352k(156), baud4368k(157), baud4416k(158), baud4424k(159), baud4480k(160), baud4536k(161), baud4544k(162), baud4592k(163), baud4608k(164), baud4648k(165), baud4672k(166), baud4704k(167), baud4736k(168), baud4760k(169), baud4800k(170), baud4816k(171), baud4864k(172), baud4872k(173), baud4928k(174), baud4984k(175), baud4992k(176), baud5040k(177), baud5056k(178), baud5096k(179), baud5120k(180), baud5152k(181), baud5184k(182), baud5208k(183), baud5248k(184), baud5264k(185), baud5312k(186), baud5320k(187), baud5376k(188), baud5432k(189), baud5440k(190), baud5488k(191), baud5504k(192), baud5544k(193), baud5568k(194), baud5600k(195), baud5632k(196), baud5656k(197), baud5696k(198), baud5712k(199), baud5760k(200), baud5768k(201), baud5824k(202), baud5880k(203), baud5888k(204), baud5936k(205), baud5952k(206), baud5992k(207), baud6016k(208), baud6048k(209), baud6080k(210), baud6104k(211), baud6144k(212), baud6160k(213), baud6208k(214), baud6216k(215), baud6272k(216), baud6328k(217), baud6336k(218), baud6384k(219), baud6400k(220), baud6440k(221), baud6464k(222), baud6496k(223), baud6528k(224), baud6552k(225), baud6592k(226), baud6608k(227), baud6656k(228), baud6664k(229), baud6720k(230), baud6776k(231), baud6784k(232), baud6832k(233), baud6848k(234), baud6888k(235), baud6912k(236), baud6944k(237), baud6976k(238), baud7000k(239), baud7040k(240), baud7056k(241), baud7104k(242), baud7112k(243), baud7168k(244), baud7224k(245), baud7232k(246), baud7280k(247), baud7296k(248), baud7336k(249), baud7360k(250), baud7392k(251), baud7424k(252), baud7448k(253), baud7488k(254), baud7504k(255), baud7552k(256), baud7560k(257), baud7616k(258), baud7680k(259), baud7672k(260), baud7728k(261), baud7744k(262), baud7784k(263), baud7808k(264), baud7840k(265), baud7872k(266), baud7896k(267), baud7936k(268), baud7952k(269), baud8000k(270), baud8008k(271), baud8064k(272), baud8120k(273), baud8128k(274), baud8176k(275), baud8192k(276), baud8232k(277), baud8256k(278), baud8288k(279), baud8320k(280), baud8344k(281), baud8384k(282), baud8400k(283), baud8448k(284), baud8456k(285), baud8512k(286), baud8568k(287), baud8576k(288), baud8624k(289), baud8640k(290), baud8680k(291), baud8704k(292), baud8736k(293), baud8768k(294), baud8792k(295), baud8832k(296), baud8848k(297), baud8896k(298), baud8904k(299), baud8960k(300), baud9016k(301), baud9024k(302), baud9072k(303), baud9088k(304), baud9128k(305), baud9152k(306), baud9184k(307), baud9216k(308), baud9240k(309), baud9280k(310), baud9296k(311), baud9344k(312), baud9352k(313), baud9408k(314), baud9464k(315), baud9472k(316), baud9520k(317), baud9536k(318), baud9576k(319), baud9600k(320), baud9632k(321), baud9664k(322), baud9688k(323), baud9728k(324), baud9744k(325), baud9792k(326), baud9800k(327), baud9856k(328), baud9912k(329), baud9920k(330), baud9968k(331), baud9984k(332), baud10024k(333), baud10048k(334), baud10080k(335), baud10112k(336), baud10136k(337), baud10176k(338), baud10192k(339), baud10240k(340), baud10248k(341), baud10304k(342), baud10360k(343), baud10368k(344), baud10416k(345), baud10432k(346), baud10472k(347), baud10496k(348), baud10528k(349), baud10560k(350), baud10584k(351), baud10624k(352), baud10640k(353), baud10688k(354), baud10696k(355), baud10752k(356), baud10808k(357), baud10816k(358), baud10864k(359), baud10880k(360), baud10920k(361), baud10944k(362), baud10976k(363), baud11008k(364), baud11032k(365), baud11072k(366), baud11088k(367), baud11136k(368), baud11144k(369), baud11200k(370), baud11256k(371), baud11264k(372), baud11312k(373), baud11328k(374), baud11368k(375), baud11392k(376), baud11424k(377), baud11456k(378), baud11480k(379), baud11520k(380), baud11536k(381), baud11584k(382), baud11592k(383), baud11648k(384), baud11704k(385), baud11712k(386), baud11760k(387), baud11776k(388), baud11816k(389), baud11840k(390), baud11872k(391), baud11904k(392), baud11928k(393), baud11968k(394), baud11984k(395), baud12032k(396), baud12040k(397), baud12096k(398), baud12152k(399), baud12160k(400), baud12208k(401), baud12224k(402), baud12264k(403), baud12288k(404), baud12320k(405), baud12352k(406), baud12376k(407), baud12416k(408), baud12432k(409), baud12480k(410), baud12488k(411), baud12544k(412), baud12600k(413), baud12608k(414), baud12656k(415), baud12672k(416), baud12712k(417), baud12736k(418), baud12768k(419), baud12800k(420), baud12824k(421), baud12864k(422), baud12880k(423), baud12928k(424), baud12936k(425), baud12992k(426), baud13048k(427), baud13056k(428), baud13104k(429), baud13120k(430), baud13160k(431), baud13184k(432), baud13216k(433), baud13248k(434), baud13272k(435), baud13312k(436), baud13328k(437), baud13376k(438), baud13384k(439), baud13440k(440), baud13496k(441), baud13504k(442), baud13552k(443), baud13568k(444), baud13608k(445), baud13632k(446), baud13664k(447), baud13696k(448), baud13720k(449), baud13760k(450), baud13776k(451), baud13824k(452), baud13832k(453), baud13888k(454), baud13944k(455), baud13952k(456), baud14000k(457), baud14016k(458), baud14056k(459), baud14080k(460), baud14112k(461), baud14144k(462), baud14168k(463), baud14208k(464), baud14224k(465), baud14272k(466), baud14280k(467), baud14336k(468), baud14400k(469), baud14464k(470), baud14528k(471), baud14592k(472), baud14656k(473), baud14720k(474), baud14784k(475), baud14848k(476), baud14912k(477), baud14976k(478), baud15040k(479), baud15104k(480), baud15168k(481), baud15232k(482), baud15296k(483), baud15360k(484), baud15424k(485), baud15488k(486), baud15552k(487), baud15616k(488), baud15680k(489), baud15744k(490), baud15808k(491), baud15872k(492), baud15936k(493), baud16000k(494), baud16064k(495), baud16128k(496), baud16192k(497), baud16256k(498), baud16320k(499), baud16384k(500), baud1544k(501), baud230400(502), baud150(503) | ||
| msProtocol | 1.3.6.1.4.1.1751.2.18.2.4.1.4 | ||
| protocol type for serial port | |||
| OBJECT-TYPE | |||
| INTEGER | rs232(1), rs449(2), rs530(3), v35(4), x21(5), kg(6), rs530A(7) | ||
| msEquipmentType | 1.3.6.1.4.1.1751.2.18.2.4.1.5 | ||
| Equipment type | |||
| OBJECT-TYPE | |||
| INTEGER | dte(1), dce(2) | ||
| msRs232XmitMode | 1.3.6.1.4.1.1751.2.18.2.4.1.6 | ||
| transmit mode for rs232 DTE/DCE serial port | |||
| OBJECT-TYPE | |||
| INTEGER | synchronous(1), asynchronous(2) | ||
| msRs232Parity | 1.3.6.1.4.1.1751.2.18.2.4.1.7 | ||
| parity for rs232 DTE/DCE serial port | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), odd(2), even(3) | ||
| msRs232DataBits | 1.3.6.1.4.1.1751.2.18.2.4.1.8 | ||
| data bits for rs232 DTE/DCE serial port | |||
| OBJECT-TYPE | |||
| INTEGER | eight(1), seven(2), six(3) | ||
| msRs232StopBits | 1.3.6.1.4.1.1751.2.18.2.4.1.9 | ||
| stop bits for rs232 DTE/DCE serial port | |||
| OBJECT-TYPE | |||
| INTEGER | one(1), two(2) | ||
| msTxDataClkSrcForDte | 1.3.6.1.4.1.1751.2.18.2.4.1.10 | ||
| Transmit data clock source for DTE, externalTx in is not valid for rs232. This field is ignored if the local side is DCE. | |||
| OBJECT-TYPE | |||
| INTEGER | localTiming(1), txRxTiming(2), txTiming(3) | ||
| msTxDataClkSrcForDce | 1.3.6.1.4.1.1751.2.18.2.4.1.11 | ||
| Transmit data clock source for DCE localTiming: a local clock source is used. (e.g., from backplane (stratum) loopTiming: from remote This field is ignored if the local side is DTE | |||
| OBJECT-TYPE | |||
| INTEGER | localTiming(1), loopTiming(2) | ||
| msRxDataClkSrcForDce | 1.3.6.1.4.1.1751.2.18.2.4.1.12 | ||
| Receive data clock source for DCE localTiming: a local clock source is used. (e.g., from backplane (stratum) loopTiming: from remote This field is ignored if the local side is DTE | |||
| OBJECT-TYPE | |||
| INTEGER | localTiming(1), externalTiming(2) | ||
| msRxClkPolarity | 1.3.6.1.4.1.1751.2.18.2.4.1.13 | ||
| Whether or not to reverse the receive clock | |||
| OBJECT-TYPE | |||
| INTEGER | standard(1), inverted(2) | ||
| msTxClkPolarity | 1.3.6.1.4.1.1751.2.18.2.4.1.14 | ||
| Whether or not to reverse the transmit clock | |||
| OBJECT-TYPE | |||
| INTEGER | standard(1), inverted(2) | ||
| msKgResync | 1.3.6.1.4.1.1751.2.18.2.4.1.15 | ||
| Turn KG resync on/off | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| msHandshake | 1.3.6.1.4.1.1751.2.18.2.4.1.16 | ||
| Multiserial Module handshake: observed : used with AAL1 to monitor RTS/CTS exchange. | |||
| OBJECT-TYPE | |||
| INTEGER | observed(1), ignored(2) | ||
| msSpeedAdaption | 1.3.6.1.4.1.1751.2.18.2.4.1.17 | ||
| The state of allowing speed adaption | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| msBitStuffing | 1.3.6.1.4.1.1751.2.18.2.4.1.18 | ||
| When msBitStuffing is enabled, CAC throughput is (1 + 1/7) user throughtput. Otherwise the CAC throughput is the same as the user throughput. msBitStuffing can only be enabled for circuit emulation interfaces. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| msLineStatus | 1.3.6.1.4.1.1751.2.18.2.4.1.19 | ||
| line status on the port: The msLineStatus is a bit map representation. It can represent multiple failures (alarms) if supported by the card. NoAlarm should be set if and only if no other flag is set. The various bit positions are: 1: NoAlarm 2: Loss of Signal | |||
| OBJECT-TYPE | |||
| INTEGER | 1..2 | ||
| msRxDataPolarity | 1.3.6.1.4.1.1751.2.18.2.4.1.20 | ||
| Whether or not to reverse the receive data | |||
| OBJECT-TYPE | |||
| INTEGER | standard(1), inverted(2) | ||
| msTxDataPolarity | 1.3.6.1.4.1.1751.2.18.2.4.1.21 | ||
| Whether or not to reverse the transmit data | |||
| OBJECT-TYPE | |||
| INTEGER | standard(1), inverted(2) | ||
| msLoopbackConfig | 1.3.6.1.4.1.1751.2.18.2.4.1.22 | ||
| This variable represents the loopback configuration of the Serial port. | |||
| OBJECT-TYPE | |||
| INTEGER | noLoop(1), localLoop(2), lineLoop(3) | ||
| msLOSDetection | 1.3.6.1.4.1.1751.2.18.2.4.1.23 | ||
| State of detection of LOS by IO card. LOS detection is always enabled when msBitStuffing is enabled. When the interface is not circuit emulation, the IO card does not report any LOS. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| ds1PortConfigTable | 1.3.6.1.4.1.1751.2.18.2.5 | ||
| Table of ds1 specific port attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Ds1PortConfigEntry | |||
| ds1PortConfigEntry | 1.3.6.1.4.1.1751.2.18.2.5.1 | ||
| Row definition for ds1 specific port attributes | |||
| OBJECT-TYPE | |||
| Ds1PortConfigEntry | |||
| ds1PortId | 1.3.6.1.4.1.1751.2.18.2.5.1.1 | ||
| interface index - slot/port: SSPP | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ds1Channelization | 1.3.6.1.4.1.1751.2.18.2.5.1.2 | ||
| ds1 interface type | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| ds1LineType | 1.3.6.1.4.1.1751.2.18.2.5.1.3 | ||
| ds1 interface type | |||
| OBJECT-TYPE | |||
| INTEGER | esf(1), d4(2) | ||
| ds1LineCoding | 1.3.6.1.4.1.1751.2.18.2.5.1.4 | ||
| ds1 interface type | |||
| OBJECT-TYPE | |||
| INTEGER | b8zs(1), ami(2) | ||
| ds1LoopbackConfig | 1.3.6.1.4.1.1751.2.18.2.5.1.5 | ||
| This variable represents the loopback configuration of the ds1 interface | |||
| OBJECT-TYPE | |||
| INTEGER | noLoop(1), localLoop(2), lineLoop(3), payloadLoop(4) | ||
| ds1TransmitClockSource | 1.3.6.1.4.1.1751.2.18.2.5.1.6 | ||
| ds1 timing source | |||
| OBJECT-TYPE | |||
| INTEGER | loopTiming(1), localTiming(2), adaptive(3) | ||
| ds1LineBuildOut | 1.3.6.1.4.1.1751.2.18.2.5.1.7 | ||
| ds1 line build out | |||
| OBJECT-TYPE | |||
| INTEGER | upTo133Feet(1), upTo266Feet(2), upTo399Feet(3), upTo533Feet(4), upTo655Feet(5), negative7-5Db(6), negative15Db(7), negative22-5Db(8) | ||
| ds1LineStatus | 1.3.6.1.4.1.1751.2.18.2.5.1.8 | ||
| This variable indicates the Line Status of the interface. It contains loopback, failure, re- ceived 'alarm' and transmitted 'alarm' infor- mation. The dsx1LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) and a LoopbackState simultaneously. ds1NoAlarm should be set if and only if no other flag is set. If the ds1LoopbackState bit is set, the loopbak in effect can be determined from the ds1LoopbackConfig object. The various bit positions are: 1: dsx1NoAlarm: No Alarm Present 2: dsx1RcvFarEndLOF: Far end LOF (a.k.a., Yellow Alarm) 4: dsx1XmtFarEndLOF: Near end sending LOF Indication 8: dsx1RcvAIS: Far end sending AIS 16: dsx1XmtAIS: Near end sending AIS 32: dsx1LossOfFrame: Near end LOF (a.k.a., Red Alarm) 64: dsx1LossOfSignal: Near end Loss Of Signal 128: dsx1LoopbackState: Near end is looped 256: dsx1T16AIS: E1 TS16 AIS 512: dsx1RcvFarEndLOMF: Far End Sending TS16 LOMF 1024: dsx1XmtFarEndLOMF: Near End Sending TS16 LOMF 2048: dsx1RcvTestCode: Near End detects a test code 4096: dsx1OtherFailure: any line status not defined here 8192: dsx1RmtLoopback: Far end loopback | |||
| OBJECT-TYPE | |||
| INTEGER | 1..16383 | ||
| ds1EnhanceFeatureSet1 | 1.3.6.1.4.1.1751.2.18.2.5.1.10 | ||
| To enable/disable a proprietary ab signaling scheme, it applies to all DS0s in the port. No individual DS0 signaling can be configured under this scheme. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| ds1DataTransferType | 1.3.6.1.4.1.1751.2.18.2.5.1.11 | ||
| DS1 data transfer type is only applicable in Circuit Emulation where unstructured CE packets entire T1 frame including the F-bit into the AAL1 for data tranfer, whereas, the structured CE packets the entire T1 frame except the F-bit. | |||
| OBJECT-TYPE | |||
| INTEGER | structured(1), unstructured(2) | ||
| ds1OamInterworkingType | 1.3.6.1.4.1.1751.2.18.2.5.1.12 | ||
| Specifies whether the interworking is done by trunk conditioning or unframed1s | |||
| OBJECT-TYPE | |||
| INTEGER | trunkCond(1), unframed1s(2) | ||
| ds1ConnGatewayFeature | 1.3.6.1.4.1.1751.2.18.2.5.1.14 | ||
| To enable/disable connection gateway (Sapphire) API. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| ds1InLineCode | 1.3.6.1.4.1.1751.2.18.2.5.1.15 | ||
| To select and support the inlinecode option in either ANSI or DS1_ANI (ANI: Access Network Interface) | |||
| OBJECT-TYPE | |||
| INTEGER | aNSI(1), ds1-ANI(2) | ||
| oc3PortConfigTable | 1.3.6.1.4.1.1751.2.18.2.6 | ||
| Table of common physical Port attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Oc3PortConfigEntry | |||
| oc3PortConfigEntry | 1.3.6.1.4.1.1751.2.18.2.6.1 | ||
| Row definition for common physical port attributes | |||
| OBJECT-TYPE | |||
| Oc3PortConfigEntry | |||
| oc3PortId | 1.3.6.1.4.1.1751.2.18.2.6.1.1 | ||
| interface index - SSPP | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oc3LoopbackConfig | 1.3.6.1.4.1.1751.2.18.2.6.1.2 | ||
| This variable represents the loopback configuration of the OC3 interface See above diagrams for explanations of loops. | |||
| OBJECT-TYPE | |||
| INTEGER | noLoop(1), localLoop(2), lineLoop(3) | ||
| oc3TransmitClockSource | 1.3.6.1.4.1.1751.2.18.2.6.1.3 | ||
| The source of Tranmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used. | |||
| OBJECT-TYPE | |||
| INTEGER | loopTiming(1), localTiming(2) | ||
| oc3LineStatus | 1.3.6.1.4.1.1751.2.18.2.6.1.4 | ||
| oc3 line status - 1: oc3NoAlarm: No alarm present 2: oc3RcvRAIFailure: Receiving Yellow/Remote Alarm Indication 4: oc3XmitRAIAlarm: Transmitting Yellow/Remote Alarm Indication 8: oc3RcvAIS: Receiving AIS failure state 16: oc3XmitAIS: Transmitting AIS failure statue 32: oc3LOF: Receiving LOF failure state 64: oc3LOS: Reveiving LOS failure state 128: oc3LoopbackState: Looping the received signal 256: oc3RcvTestCode: Receiving a Test Pattern 512: oc3OtherFailure: any line status not defined 1024: oc3LCD: Receiving Loss Of Cell Delineation 2048: oc3LRDI: Receiving Line RDI failure state 4096: oc3PRDI: Receiving Path RDI failure state | |||
| OBJECT-TYPE | |||
| INTEGER | 1..8191 | ||
| oc3OutputTransferRate | 1.3.6.1.4.1.1751.2.18.2.6.1.5 | ||
| User selectable parameter which allows the outgoing rate of the port to be reduced to 50% oc3, halfRate, only on AQueMan. | |||
| OBJECT-TYPE | |||
| INTEGER | fullRate(1), halfRate(2) | ||
| oc3APSConfiguration | 1.3.6.1.4.1.1751.2.18.2.6.1.6 | ||
| Indicates whether APS is configured for this port . | |||
| OBJECT-TYPE | |||
| INTEGER | unprotected(1), working(2), protection(3) | ||
| twoWireSourcePortConfigTable | 1.3.6.1.4.1.1751.2.18.2.7 | ||
| Table of common physical Port attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| TwoWireSourcePortConfigEntry | |||
| twoWireSourcePortConfigEntry | 1.3.6.1.4.1.1751.2.18.2.7.1 | ||
| Row definition for common physical port attributes | |||
| OBJECT-TYPE | |||
| TwoWireSourcePortConfigEntry | |||
| twoWireSourcePortId | 1.3.6.1.4.1.1751.2.18.2.7.1.1 | ||
| interface index - SSPP | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| twoWireSourceLoopDetection | 1.3.6.1.4.1.1751.2.18.2.7.1.2 | ||
| This field selects terminal equipment loop circuit detection mode. | |||
| OBJECT-TYPE | |||
| INTEGER | loopStart(1), groundStart(2) | ||
| twoWireSourceDialMode | 1.3.6.1.4.1.1751.2.18.2.7.1.3 | ||
| This field configures twoWireSource card to support communication terminal equipment. | |||
| OBJECT-TYPE | |||
| INTEGER | dtmf(1), dialPulse(2) | ||
| twoWireSourceLoopBackConfig | 1.3.6.1.4.1.1751.2.18.2.7.1.4 | ||
| Configuration of 2W Source LoopBack. | |||
| OBJECT-TYPE | |||
| INTEGER | noLoopback(1), facilityLoopback(2) | ||
| twoWireSourceLineStatus | 1.3.6.1.4.1.1751.2.18.2.7.1.5 | ||
| twoWireSource line status: 1: NoAlarm: No alarm present 2: SignalingFailureState 4: FacilityLoopBack 8: Maintenance 16: Out Of Service 32: OtherFailure | |||
| OBJECT-TYPE | |||
| INTEGER | 1..1023 | ||
| twoWireSourceSignalingBits | 1.3.6.1.4.1.1751.2.18.2.7.1.6 | ||
| This field selects the signaling bits as seen in DS1 signal, ab or abcd. | |||
| OBJECT-TYPE | |||
| INTEGER | ab(1), abcd(2) | ||
| twoWireSourceRingCadence | 1.3.6.1.4.1.1751.2.18.2.7.1.7 | ||
| This field selects ring On/Off pattern. | |||
| OBJECT-TYPE | |||
| INTEGER | oneOnThreeOff(1) | ||
| twoWireSourceSignalingState | 1.3.6.1.4.1.1751.2.18.2.7.1.8 | ||
| This field reflects the current signaling state. | |||
| OBJECT-TYPE | |||
| INTEGER | idle(1), dtmf(2), ringBack(3), connect(4), onHook(5), ringTrip(6), nearEndDisconnect(7), farEndDisconnect(8) | ||
| twoWireSourceTestMode | 1.3.6.1.4.1.1751.2.18.2.7.1.9 | ||
| This field selects line test mode. For normal operation, this field should be OFF. | |||
| OBJECT-TYPE | |||
| INTEGER | off(1), quietTime(2), f-1004Hz(3) | ||
| highSpeedPortConfigTable | 1.3.6.1.4.1.1751.2.18.2.8 | ||
| Table of common physical Port attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| HighSpeedPortConfigEntry | |||
| highSpeedPortConfigEntry | 1.3.6.1.4.1.1751.2.18.2.8.1 | ||
| Row definition for common physical port attributes | |||
| OBJECT-TYPE | |||
| HighSpeedPortConfigEntry | |||
| highSpeedPortId | 1.3.6.1.4.1.1751.2.18.2.8.1.1 | ||
| interface index - SSPP | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| highSpeedPortInputRate | 1.3.6.1.4.1.1751.2.18.2.8.1.2 | ||
| Port input rate | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| highSpeedPortOutputRate | 1.3.6.1.4.1.1751.2.18.2.8.1.3 | ||
| Port output rate | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dspPortConfigTable | 1.3.6.1.4.1.1751.2.18.2.9 | ||
| Table of common physical Port attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DspPortConfigEntry | |||
| dspPortConfigEntry | 1.3.6.1.4.1.1751.2.18.2.9.1 | ||
| Row definition for common physical port attributes | |||
| OBJECT-TYPE | |||
| DspPortConfigEntry | |||
| dspPortId | 1.3.6.1.4.1.1751.2.18.2.9.1.1 | ||
| interface index - SSPP | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| twoWireSinkPortConfigTable | 1.3.6.1.4.1.1751.2.18.2.10 | ||
| Table of common physical Port attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| TwoWireSinkPortConfigEntry | |||
| twoWireSinkPortConfigEntry | 1.3.6.1.4.1.1751.2.18.2.10.1 | ||
| Row definition for common physical port attributes | |||
| OBJECT-TYPE | |||
| TwoWireSinkPortConfigEntry | |||
| twoWireSinkPortId | 1.3.6.1.4.1.1751.2.18.2.10.1.1 | ||
| interface index - SSPP | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| twoWireSinkLoopDetection | 1.3.6.1.4.1.1751.2.18.2.10.1.2 | ||
| Types of loop detection. | |||
| OBJECT-TYPE | |||
| INTEGER | loopStart(1), groundStart(2) | ||
| twoWireSinkDialMode | 1.3.6.1.4.1.1751.2.18.2.10.1.3 | ||
| This field selects subscribed dial mode. | |||
| OBJECT-TYPE | |||
| INTEGER | dtmf(1), dialPulse(2) | ||
| twoWireSinkLineStatus | 1.3.6.1.4.1.1751.2.18.2.10.1.4 | ||
| twoWireSink line status: 1: NoAlarm: No alarm present 2: SignalingFailureState 4: FacilityLoopBack 8: Maintenance 16: Out Of Service 32: OtherFailure | |||
| OBJECT-TYPE | |||
| INTEGER | 1..1023 | ||
| twoWireSinkSignalingBits | 1.3.6.1.4.1.1751.2.18.2.10.1.5 | ||
| This field selects the signaling bits as seen in DS1 signal, ab or abcd. | |||
| OBJECT-TYPE | |||
| INTEGER | ab(1), abcd(2) | ||
| twoWireSinkSignalingState | 1.3.6.1.4.1.1751.2.18.2.10.1.6 | ||
| This field reflects the current signaling state. | |||
| OBJECT-TYPE | |||
| INTEGER | idle(1), connect(2), onHook(3), ringTrip(4), nearEndDisconnect(5), farEndDisconnect(6) | ||
| twoWireSinkTestMode | 1.3.6.1.4.1.1751.2.18.2.10.1.7 | ||
| This field selects line test mode. For normal operation, this field should be OFF. | |||
| OBJECT-TYPE | |||
| INTEGER | off(1), quietTime(2), f-1004Hz(3) | ||
| e3PortConfigTable | 1.3.6.1.4.1.1751.2.18.2.11 | ||
| Table of e3 specific port attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| E3PortConfigEntry | |||
| e3PortConfigEntry | 1.3.6.1.4.1.1751.2.18.2.11.1 | ||
| Row definition for e3 specific port attributes | |||
| OBJECT-TYPE | |||
| E3PortConfigEntry | |||
| e3PortId | 1.3.6.1.4.1.1751.2.18.2.11.1.1 | ||
| slot/port: SSPP | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| e3LineType | 1.3.6.1.4.1.1751.2.18.2.11.1.2 | ||
| This variable indicates the basic frame structure supported in this E3 port. The rate of E3 is 34.368 Mbps. TITLE: SPECIFICATION: G.832 ITU-T G.832 1993. G.751 ITU-T G.751 1998 | |||
| OBJECT-TYPE | |||
| INTEGER | g832(1), g751(2) | ||
| e3LineCoding | 1.3.6.1.4.1.1751.2.18.2.11.1.3 | ||
| The line code supported for the E3 port. The High Density Bipolar of order 3 (hdb3) as specified in section 8.1 of ITU-T G.703. | |||
| OBJECT-TYPE | |||
| INTEGER | hdb3(1) | ||
| e3LoopbackConfig | 1.3.6.1.4.1.1751.2.18.2.11.1.4 | ||
| This variable represents the loopback configuration of the E3 interface. See above diagrams for explanations of loops. | |||
| OBJECT-TYPE | |||
| INTEGER | noLoop(1), localLoop(2), lineLoop(3), payloadLoop(4) | ||
| e3TransmitClockSource | 1.3.6.1.4.1.1751.2.18.2.11.1.5 | ||
| The source of Tranmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used. 'adaptiveTiming' indicates that the adaptive clocking mechanism is used. | |||
| OBJECT-TYPE | |||
| INTEGER | loopTiming(1), localTiming(2), adaptiveTiming(3) | ||
| e3LineStatus | 1.3.6.1.4.1.1751.2.18.2.11.1.6 | ||
| e3 line status: 1: e3NoAlarm: No alarm present 2: e3RcvRAIFailure: Receiving Yellow/Remote Alarm Indication 4: e3XmitRAIAlarm: Transmitting Yellow/Remote Alarm Indication 8: e3RcvAIS: Receiving AIS failure state 16: e3XmitAIS: Transmitting AIS failure statue 32: e3LOF: Receiving LOF failure state 64: e3LOS: Reveiving LOS failure state 128: e3LoopbackState: Looping the received signal 256: e3RcvTestCode: Receiving a Test Pattern 512: e3OtherFailure: any line status not defined | |||
| OBJECT-TYPE | |||
| INTEGER | 1..1023 | ||
| e3LineBuildOut | 1.3.6.1.4.1.1751.2.18.2.11.1.7 | ||
| e3 line build out | |||
| OBJECT-TYPE | |||
| INTEGER | short(1), long(2) | ||
| e3LineScramble | 1.3.6.1.4.1.1751.2.18.2.11.1.8 | ||
| e3 line scramble | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| e3CellMapping | 1.3.6.1.4.1.1751.2.18.2.11.1.9 | ||
| e3 cell mapping method | |||
| OBJECT-TYPE | |||
| INTEGER | directMapping(1), plcp(2) | ||
| e1PortConfigTable | 1.3.6.1.4.1.1751.2.18.2.12 | ||
| Table of e1 specific port attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| E1PortConfigEntry | |||
| e1PortConfigEntry | 1.3.6.1.4.1.1751.2.18.2.12.1 | ||
| Row definition for e1 specific port attributes | |||
| OBJECT-TYPE | |||
| E1PortConfigEntry | |||
| e1PortId | 1.3.6.1.4.1.1751.2.18.2.12.1.1 | ||
| interface index - slot/port: SSPP | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| e1Channelization | 1.3.6.1.4.1.1751.2.18.2.12.1.2 | ||
| e1 interface type | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| e1LineType | 1.3.6.1.4.1.1751.2.18.2.12.1.3 | ||
| E1 interface type. The rate of E1 is 2.048 Mbps | |||
| OBJECT-TYPE | |||
| INTEGER | crc-mf(1) | ||
| e1LineCoding | 1.3.6.1.4.1.1751.2.18.2.12.1.4 | ||
| e1 interface type | |||
| OBJECT-TYPE | |||
| INTEGER | hdb3(1) | ||
| e1LoopbackConfig | 1.3.6.1.4.1.1751.2.18.2.12.1.5 | ||
| This variable represents the loopback configuration of the e1 interface See above diagrams for explanations of loops. | |||
| OBJECT-TYPE | |||
| INTEGER | noLoop(1), localLoop(2), lineLoop(3) | ||
| e1TransmitClockSource | 1.3.6.1.4.1.1751.2.18.2.12.1.6 | ||
| e1 timing source | |||
| OBJECT-TYPE | |||
| INTEGER | loopTiming(1), localTiming(2), adaptive(3) | ||
| e1LineNationalBits | 1.3.6.1.4.1.1751.2.18.2.12.1.7 | ||
| e1 line country specific code | |||
| OBJECT-TYPE | |||
| INTEGER | b00000(1), b00001(2), b00010(3), b00011(4), b00100(5), b00101(6), b00110(7), b00111(8), b01000(9), b01001(10), b01010(11), b01011(12), b01100(13), b01101(14), b01110(15), b01111(16), b10000(17), b10001(18), b10010(19), b10011(20), b10100(21), b10101(22), b10110(23), b10111(24), b11000(25), b11001(26), b11010(27), b11011(28), b11100(29), b11101(30), b11110(31), b11111(32) | ||
| e1LineStatus | 1.3.6.1.4.1.1751.2.18.2.12.1.8 | ||
| This variable indicates the Line Status of the interface. It contains loopback, failure, re- ceived 'alarm' and transmitted 'alarm' infor- mation. The e1LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) and a LoopbackState simultaneously. e1NoAlarm should be set if and only if no other flag is set. If the e1LoopbackState bit is set, the loopback in effect can be determined from the e1LoopbackConfig object. The various bit positions are: 1: e1NoAlarm: No Alarm Present 2: e1RcvFarEndLOF: Far end LOF (a.k.a., Yellow Alarm) 4: e1XmtFarEndLOF: Near end sending LOF Indication 8: e1RcvAIS: Far end sending AIS 16: e1XmtAIS: Near end sending AIS 32: e1LossOfFrame: Near end LOF (a.k.a., Red Alarm) 64: e1LossOfSignal: Near end Loss Of Signal 128: e1LoopbackState: Near end is looped 256: e1T16AIS: E1 TS16 AIS 512: e1RcvFarEndLOMF: Far End Sending TS16 LOMF 1024: e1XmtFarEndLOMF: Near End Sending TS16 LOMF 2048: e1RcvTestCode: Near End detects a test code 4096: e1OtherFailure: any line status not defined here | |||
| OBJECT-TYPE | |||
| INTEGER | 1..8191 | ||
| e1TS16 | 1.3.6.1.4.1.1751.2.18.2.12.1.10 | ||
| Time slot 16 is configurable for channel associated signaling (CAS) or data. cas: 'ABCD' signaling will be extracted in time slot 16 if channel is configured for circuit emulation. ccs: time slot 16 will not carry any e1 channel signaling information, instead, it will be used for data. | |||
| OBJECT-TYPE | |||
| INTEGER | cas(1), ccs(2) | ||
| e1DataTransferType | 1.3.6.1.4.1.1751.2.18.2.12.1.11 | ||
| E1 data transfer type is only applicable in Circuit Emulation where unstructured CE packets entire T1 frame including the F-bit into the AAL1 for data tranfer, whereas, the structured CE packets the entire E1 frame except the Frame alignment signal channel. | |||
| OBJECT-TYPE | |||
| INTEGER | structured(1), unstructured(2) | ||
| e1CRC4 | 1.3.6.1.4.1.1751.2.18.2.12.1.12 | ||
| Enable or disable transmission of CRC4 bits on bit 1 of each frame. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| e1OamInterworkingType | 1.3.6.1.4.1.1751.2.18.2.12.1.13 | ||
| Specifies whether the interworking is done by trunk conditioning or unframed1s | |||
| OBJECT-TYPE | |||
| INTEGER | trunkCond(1), unframed1s(2) | ||
| e1EnhanceFeatureSet1 | 1.3.6.1.4.1.1751.2.18.2.12.1.14 | ||
| To enable/disable a proprietary ab signaling scheme, it applies to all DS0s in the port. No individual DS0 signaling can be configured under the scheme. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| e1ConnGatewayFeature | 1.3.6.1.4.1.1751.2.18.2.12.1.15 | ||
| To enable/disable connection gateway (Sapphire) API. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| ethernetPortConfigTable | 1.3.6.1.4.1.1751.2.18.2.13 | ||
| Table of common physical Port attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| EthernetPortConfigEntry | |||
| ethernetPortConfigEntry | 1.3.6.1.4.1.1751.2.18.2.13.1 | ||
| Row definition for common physical port attributes | |||
| OBJECT-TYPE | |||
| EthernetPortConfigEntry | |||
| ethernetPortId | 1.3.6.1.4.1.1751.2.18.2.13.1.1 | ||
| interface index - SSPP | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ethernetLinkType | 1.3.6.1.4.1.1751.2.18.2.13.1.2 | ||
| The type of port can either be set to 10baseT or 100baseT for the first port on the ethernet card. The other ports can only be set to 10baseT. The Auto mode will detect what LAN speed the port is connected to. | |||
| OBJECT-TYPE | |||
| INTEGER | l-10BaseT(1), l-100BaseT(2), auto(3) | ||
| ethernetPhysicalAddr | 1.3.6.1.4.1.1751.2.18.2.13.1.3 | ||
| The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with dot1dSprPriority a unique Bridgeidentifier is formed which is used in the Spanning Tree Protocol. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(6) | ||
| ethernetLineStatus | 1.3.6.1.4.1.1751.2.18.2.13.1.4 | ||
| ethernet line status: 1: Down 2: 10baseT-FullDuplex 4: 10baseT-HalfDuplex 8: 100baseT-FullDuplex 16: 100baseT-HalfDuplex | |||
| OBJECT-TYPE | |||
| INTEGER | 1..31 | ||
| ethernetDuplexMode | 1.3.6.1.4.1.1751.2.18.2.13.1.5 | ||
| Set the port to either be in full or half duplex. You can also set the port to auto detect the mode it is connected to. | |||
| OBJECT-TYPE | |||
| INTEGER | full(1), half(2), auto(3) | ||
| dsp2PortConfigTable | 1.3.6.1.4.1.1751.2.18.2.14 | ||
| Table of common physical Port attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dsp2PortConfigEntry | |||
| dsp2PortConfigEntry | 1.3.6.1.4.1.1751.2.18.2.14.1 | ||
| Row definition for common physical port attributes | |||
| OBJECT-TYPE | |||
| Dsp2PortConfigEntry | |||
| dsp2PortId | 1.3.6.1.4.1.1751.2.18.2.14.1.1 | ||
| interface index - SSPP | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| imaPortConfigTable | 1.3.6.1.4.1.1751.2.18.2.15 | ||
| Table used for the IMA virtual port on cards that have physical interfaces configured as atmIma. Corresponds to port 7 on DS1 and E1. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ImaPortConfigEntry | |||
| imaPortConfigEntry | 1.3.6.1.4.1.1751.2.18.2.15.1 | ||
| Row definition for ima specific port attributes | |||
| OBJECT-TYPE | |||
| ImaPortConfigEntry | |||
| imaPortId | 1.3.6.1.4.1.1751.2.18.2.15.1.1 | ||
| interface index - slot/port: SSPP | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oc3APS | 1.3.6.1.4.1.1751.2.18.2.16 | ||
| OBJECT IDENTIFIER | |||
| oc3APSPairConfigTable | 1.3.6.1.4.1.1751.2.18.2.16.1 | ||
| Table of common physical Port attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Oc3APSPairConfigEntry | |||
| oc3APSPairConfigEntry | 1.3.6.1.4.1.1751.2.18.2.16.1.1 | ||
| Row definition for common physical port attributes | |||
| OBJECT-TYPE | |||
| Oc3APSPairConfigEntry | |||
| oc3APSPairId | 1.3.6.1.4.1.1751.2.18.2.16.1.1.1 | ||
| APS Pair Port index - SSPP | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oc3APSPairMode | 1.3.6.1.4.1.1751.2.18.2.16.1.1.2 | ||
| Unidirectional or Bidirectional mode: Uni - Each pair operates independently i.e. a switch over in one pair does not effect the remote pair. Bi - both remote and local pairs have to switch together. | |||
| OBJECT-TYPE | |||
| INTEGER | unidirectional(1), bidirectional(2) | ||
| oc3APSPairOption | 1.3.6.1.4.1.1751.2.18.2.16.1.1.3 | ||
| Nonrevertive - After a switch to Prot port, even if the working comes up there is no switch to the working port back. Revertive - traffic is switched back to work port after it comes back. | |||
| OBJECT-TYPE | |||
| INTEGER | nonrevertive(1), revertive(2) | ||
| oc3APSPairWorkingSFBERThreshold | 1.3.6.1.4.1.1751.2.18.2.16.1.1.4 | ||
| Bits error Rate threshold to declare signal failure | |||
| OBJECT-TYPE | |||
| INTEGER | tenToMinus4(1), tenToMinus5(2) | ||
| oc3APSPairWorkingSDBERThreshold | 1.3.6.1.4.1.1751.2.18.2.16.1.1.5 | ||
| Bits error Rate threshold to declare signal degrade | |||
| OBJECT-TYPE | |||
| INTEGER | tenToMinus5(1), tenToMinus6(2), tenToMinus7(3), tenToMinus8(4) | ||
| oc3APSPairProtectionSFBERThreshold | 1.3.6.1.4.1.1751.2.18.2.16.1.1.6 | ||
| Bits error Rate threshold to declare signal failure | |||
| OBJECT-TYPE | |||
| INTEGER | tenToMinus4(1), tenToMinus5(2) | ||
| oc3APSPairProtectionSDBERThreshold | 1.3.6.1.4.1.1751.2.18.2.16.1.1.7 | ||
| Bits error Rate threshold to declare signal degrade | |||
| OBJECT-TYPE | |||
| INTEGER | tenToMinus5(1), tenToMinus6(2), tenToMinus7(3), tenToMinus8(4) | ||
| oc3APSPairWTRPeriod | 1.3.6.1.4.1.1751.2.18.2.16.1.1.8 | ||
| Duration for Wait To Restore Period between 5 to 12 minutes. Ref: BellCore GR-253-Core, Issue 3, page 200, R5-56. | |||
| OBJECT-TYPE | |||
| INTEGER | 5..12 | ||
| oc3APSWorkingSlot | 1.3.6.1.4.1.1751.2.18.2.16.1.1.9 | ||
| Working slot of APS pair. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oc3APSProtectionSlot | 1.3.6.1.4.1.1751.2.18.2.16.1.1.10 | ||
| Protection slot of APS pair. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oc3APSActiveSlot | 1.3.6.1.4.1.1751.2.18.2.16.1.1.11 | ||
| Active slot of APS pair. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oc3APSPairStatus | 1.3.6.1.4.1.1751.2.18.2.16.1.1.12 | ||
| noFailure : The protection line is not in use. modeMismatch : one end is configured unidirectional and the other is bidirectional (both the ends should be configured in the same mode). Also when one end is configured for 1:1 architechture and the other end indicates it is configured for 1:n architechture.(Bidirectional mode only) swByteFailure: protection switching byte failure - defect declared when invalid / persistantly unacceptable codes are received in the K1 byte. failure declared if defect persists for an extended period. Invalid code is when the incoming K1 byte contains an unused code or a code irrelevant for the specific switching operation.(Only in bi-directional mode) chMismatch : channel mismatch is declared when the channel numbers in the transmitted K1 byte and the received K2 byte do not match for 50 ms.Channel mismatch is monitored only in bidirectional mode. | |||
| OBJECT-TYPE | |||
| INTEGER | noFailure(1), modeMismatch(2), swByteFailure(3), chMismatch(4) | ||
| oc3APSPairUserCommand | 1.3.6.1.4.1.1751.2.18.2.16.1.1.13 | ||
| APS Pair User Command | |||
| OBJECT-TYPE | |||
| INTEGER | noAction(1), manualSwitchToWorkingPort(2), manualSwitchToProtectionPort(3), forcedSwitchToWorkingPort(4), forcedSwitchToProtectionPort(5), lockoutProtection(6), clear(7) | ||
| oc3APSPairCurrentState | 1.3.6.1.4.1.1751.2.18.2.16.1.1.14 | ||
| Current State of the APS state machine | |||
| OBJECT-TYPE | |||
| INTEGER | localprotectDoNotRevert(1), localprotectManualSw(8), localprotectSD(10), localprotectSF(12), localprotectForced(14), localprotectLockOut(15), localworkingDoNotRevert(17), localworkingManualSw(24), localworkingSD(26), localworkingSF(28), localworkingForced(30), remoteprotectDoNotRevert(33), remoteprotectManualSw(40), remoteprotectSD(42), remoteprotectSF(44), remoteprotectForced(46), remoteprotectLockOut(47), noRequest(48), remoteworkingDoNotRevert(49), remoteworkingManualSw(56), remoteworkingSD(58), remoteworkingSF(60), remoteworkingForced(62) | ||
| oc3APSPairWorkingLineSignalStatus | 1.3.6.1.4.1.1751.2.18.2.16.1.1.15 | ||
| Signal Status of the working port (LOS / LOF / LCD / AIS etc.) | |||
| OBJECT-TYPE | |||
| INTEGER | noAlarm(1), signalDegradation(2), signalFailure(4), lostCellDelineation(8), switchByteFailure(16), ais-l(32), ais-p(64), lop(128), lof(256), los(512), moduleFailure(1024), lineLoopBack(2048), protocolFailure(4096), adminOutOfService(8192) | ||
| oc3APSPairProtectionLineSignalStatus | 1.3.6.1.4.1.1751.2.18.2.16.1.1.16 | ||
| Signal Status of the protection port (LOS / LOF / LCD / AIS etc.) | |||
| OBJECT-TYPE | |||
| INTEGER | noAlarm(1), signalDegradation(2), signalFailure(4), lostCellDelineation(8), switchByteFailure(16), ais-l(32), ais-p(64), lop(128), lof(256), los(512), moduleFailure(1024), lineLoopBack(2048), protocolFailure(4096), adminOutOfService(8192) | ||
| sts1PortConfigTable | 1.3.6.1.4.1.1751.2.18.2.17 | ||
| Table of sts-1 specific port attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Sts1PortConfigEntry | |||
| sts1PortConfigEntry | 1.3.6.1.4.1.1751.2.18.2.17.1 | ||
| Row definition for sts-1 specific port attributes | |||
| OBJECT-TYPE | |||
| Sts1PortConfigEntry | |||
| sts1PortId | 1.3.6.1.4.1.1751.2.18.2.17.1.1 | ||
| slot/port: SSPP | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| sts1LineCoding | 1.3.6.1.4.1.1751.2.18.2.17.1.2 | ||
| This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. B3ZS refers to the use of specified patterns of normal bits and bipolar violations which are used to replace sequences of zero bits of a specified length. | |||
| OBJECT-TYPE | |||
| INTEGER | b3zs(1) | ||
| sts1LoopbackConfig | 1.3.6.1.4.1.1751.2.18.2.17.1.3 | ||
| This variable represents the loopback configuration of the sts-1 interface. See above diagrams for explanations of loops. | |||
| OBJECT-TYPE | |||
| INTEGER | noLoop(1), localLoop(2), lineLoop(3), payloadLoop(4) | ||
| sts1TransmitClockSource | 1.3.6.1.4.1.1751.2.18.2.17.1.4 | ||
| The source of Tranmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used. 'cardFreeRun' indicates that a local oscillator on the I/O card is used as the transmit clock. | |||
| OBJECT-TYPE | |||
| INTEGER | loopTiming(1), localTiming(2), cardFreeRun(3) | ||
| sts1LineBuildOut | 1.3.6.1.4.1.1751.2.18.2.17.1.5 | ||
| sts-1 line build out | |||
| OBJECT-TYPE | |||
| INTEGER | short(1), long(2) | ||
| sts1LineStatus | 1.3.6.1.4.1.1751.2.18.2.17.1.6 | ||
| sts-1 line status: 1: dsx3NoAlarm: No alarm present 2: dsx3RcvRAIFailure: Receiving Yellow/Remote Alarm Indication 4: dsx3XmitRAIAlarm: Transmitting Yellow/Remote Alarm Indication 8: dsx3RcvAIS: Receiving AIS failure state 16: dsx3XmitAIS: Transmitting AIS failure statue 32: dsx3LOF: Receiving LOF failure state 64: dsx3LOS: Reveiving LOS failure state 128: dsx3LoopbackState: Looping the received signal 256: dsx3RcvTestCode: Receiving a Test Pattern 512: dsx3OtherFailure: any line status not defined 1024: dsx3RcvRmtAIS: 2048: dsx3RcvRmtOOF: 4096: dsx3RcvRmtLOS: 8192: dsx3RcvRmtIdle: 16384: dsx3RmtLoopback: Far end remote loopback | |||
| OBJECT-TYPE | |||
| INTEGER | 1..32767 | ||
| sts1StsPointers | 1.3.6.1.4.1.1751.2.18.2.17.1.7 | ||
| status of the sts-1 sts pointers | |||
| OBJECT-TYPE | |||
| INTEGER | locked(1), floating(2) | ||
| sts1VtPointers | 1.3.6.1.4.1.1751.2.18.2.17.1.8 | ||
| status of the sts-1 vt pointers | |||
| OBJECT-TYPE | |||
| INTEGER | locked(1), floating(2) | ||
| tasmPortConfigTable | 1.3.6.1.4.1.1751.2.18.2.18 | ||
| Table of common physical Port attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| TasmPortConfigEntry | |||
| tasmPortConfigEntry | 1.3.6.1.4.1.1751.2.18.2.18.1 | ||
| Row definition for common physical port attributes | |||
| OBJECT-TYPE | |||
| TasmPortConfigEntry | |||
| tasmPortId | 1.3.6.1.4.1.1751.2.18.2.18.1.1 | ||
| interface index - SSPP | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| protectionGroupConfigTable | 1.3.6.1.4.1.1751.2.18.2.19 | ||
| This table gives the list of Slot Protection Groups in the System. Slot protection group in one in which there are n cards being protected by 1 standby card. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ProtectionGroupConfigEntry | |||
| protectionGroupConfigEntry | 1.3.6.1.4.1.1751.2.18.2.19.1 | ||
| Row Definition for the Protection Group Tables | |||
| OBJECT-TYPE | |||
| ProtectionGroupConfigEntry | |||
| protectionSlotId | 1.3.6.1.4.1.1751.2.18.2.19.1.1 | ||
| Protection Group Index. Index is the slot id of the Slot Configured as Protection. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..15 | ||
| workingSlotBitmap | 1.3.6.1.4.1.1751.2.18.2.19.1.2 | ||
| Working Slot Bitmap which the protection slot will monitor | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| protectionCommand | 1.3.6.1.4.1.1751.2.18.2.19.1.3 | ||
| List of commands which can be executed on a protection Group. Clear : This command is used to clear any previous commands which may have been and get back to normal nto1 operation Forced SwitchOver To Protection : Switchover to Protection card even if the working card is in service active These commands to used in conjunction with the working slot id. | |||
| OBJECT-TYPE | |||
| INTEGER | clear(1), forcedSwitchOverToProtection(2) | ||
| protectionCommandSlotId | 1.3.6.1.4.1.1751.2.18.2.19.1.4 | ||
| This is the working Slot to which command has to be applied | |||
| OBJECT-TYPE | |||
| INTEGER | 1..15 | ||
| protectionGroupStatus | 1.3.6.1.4.1.1751.2.18.2.19.1.5 | ||
| Protection Status of a Protection Card. Inservice and OutofService indicates if the card has failed or still operational. Active or Standby state indicates if it is carrying active traffic or not. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), inservice-Active(2), inservice-Standby(3), outOfService-Active(4), outOfService-Standby(5) | ||
| workingSlotId | 1.3.6.1.4.1.1751.2.18.2.19.1.6 | ||
| If protection group status is active, this field will give the slot which is being working. In case it is in standby mode this field will show 0 | |||
| OBJECT-TYPE | |||
| INTEGER | 0..15 | ||
| workingFailedBitmap | 1.3.6.1.4.1.1751.2.18.2.19.1.7 | ||
| Gives Bitmap of the Failed Working Slots. Subset of the Working Slot Bitmap. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| protectionActiveCounter | 1.3.6.1.4.1.1751.2.18.2.19.1.8 | ||
| Give the Number of Times a Protection has gone to active. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| protectionOOSCounter | 1.3.6.1.4.1.1751.2.18.2.19.1.9 | ||
| Give the Number of Times a Protection Card has failed. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| channelConfig | 1.3.6.1.4.1.1751.2.18.3 | ||
| OBJECT IDENTIFIER | |||
| taxiChannelConfigTable | 1.3.6.1.4.1.1751.2.18.3.1 | ||
| Table of common physical Port attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| TaxiChannelConfigEntry | |||
| taxiChannelConfigEntry | 1.3.6.1.4.1.1751.2.18.3.1.1 | ||
| Row definition for common physical port attributes | |||
| OBJECT-TYPE | |||
| TaxiChannelConfigEntry | |||
| taxiChannelId | 1.3.6.1.4.1.1751.2.18.3.1.1.1 | ||
| interface index - SSPPCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| taxiChannelIfType | 1.3.6.1.4.1.1751.2.18.3.1.1.2 | ||
| UNI or NNI type | |||
| OBJECT-TYPE | |||
| INTEGER | unconfigured(1), atmUni3-0(2), atmUni3-1(3), iispUser(4), iispNetwork(5), atmUni4-0(6) | ||
| taxiChannelSecuFeature | 1.3.6.1.4.1.1751.2.18.3.1.1.3 | ||
| enhancement feature | |||
| OBJECT-TYPE | |||
| INTEGER | unsecurable(1), secured(2), securable(3) | ||
| ds3ChannelConfigTable | 1.3.6.1.4.1.1751.2.18.3.2 | ||
| Table of common physical channel attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Ds3ChannelConfigEntry | |||
| ds3ChannelConfigEntry | 1.3.6.1.4.1.1751.2.18.3.2.1 | ||
| Row definition for common physical channel attributes | |||
| OBJECT-TYPE | |||
| Ds3ChannelConfigEntry | |||
| ds3ChannelId | 1.3.6.1.4.1.1751.2.18.3.2.1.1 | ||
| interface index - SSPPCCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| ds3ChannelIfType | 1.3.6.1.4.1.1751.2.18.3.2.1.2 | ||
| UNI or NNI type, | |||
| OBJECT-TYPE | |||
| INTEGER | unconfigured(1), atmUni3-0(2), atmUni3-1(3), iispUser(4), iispNetwork(5), frameRelayUni(6), frameRelayNni(7), atmPnni1-0(8), atmUni4-0(9), circuitEmulation(10) | ||
| ds3ChannelSecuFeature | 1.3.6.1.4.1.1751.2.18.3.2.1.3 | ||
| Interface type configured on DS3 channel | |||
| OBJECT-TYPE | |||
| INTEGER | unsecurable(1), secured(2), securable(3) | ||
| ds1ChannelConfigTable | 1.3.6.1.4.1.1751.2.18.3.3 | ||
| Table of common physical Port attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Ds1ChannelConfigEntry | |||
| ds1ChannelConfigEntry | 1.3.6.1.4.1.1751.2.18.3.3.1 | ||
| Row definition for common physical port attributes | |||
| OBJECT-TYPE | |||
| Ds1ChannelConfigEntry | |||
| ds1ChannelId | 1.3.6.1.4.1.1751.2.18.3.3.1.1 | ||
| interface index - SSPPCCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| ds1ChannelIfType | 1.3.6.1.4.1.1751.2.18.3.3.1.2 | ||
| UNI or NNI type for ATM ,Frame Relay, or ISDN service interface type for channel | |||
| OBJECT-TYPE | |||
| INTEGER | unconfigured(1), atmUni3-0(2), atmUni3-1(3), iispUser(4), iispNetwork(5), circuitEmulation(6), frameRelayUni(7), hdlcPassThrough(8), pri-isdn-network(9), dbCirEm(10), frameRelayNni(11), pri-isdn-user(12), atmIma(13), atmPnni1-0(14), casTrunkLine(15), atmUni4-0(16), gr303(17) | ||
| ds1ChannelDs0Map | 1.3.6.1.4.1.1751.2.18.3.3.1.3 | ||
| bit map of DS0 in channel | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(3) | ||
| ds1ChannelCellMapping | 1.3.6.1.4.1.1751.2.18.3.3.1.4 | ||
| cell delineation mode for ATM cell bearing services | |||
| OBJECT-TYPE | |||
| INTEGER | directMapping(1), none(2) | ||
| ds1ChannelInputCodingRule | 1.3.6.1.4.1.1751.2.18.3.3.1.5 | ||
| enhancement feature | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), muLawPCM(2), aLawPCM(3), digital(4) | ||
| ds1ChannelSecuFeature | 1.3.6.1.4.1.1751.2.18.3.3.1.6 | ||
| enhancement feature | |||
| OBJECT-TYPE | |||
| INTEGER | unsecurable(1), secured(2), securable(3) | ||
| ds1ChannelSignaling | 1.3.6.1.4.1.1751.2.18.3.3.1.7 | ||
| refers to robbed-bit signaling in circuitEmulation interfaces. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| ds1ChannelCellScramble | 1.3.6.1.4.1.1751.2.18.3.3.1.8 | ||
| refers to enabling/disabling cell scrambling on ATM interface. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| msChannelConfigTable | 1.3.6.1.4.1.1751.2.18.3.4 | ||
| Channel configuration table for multi-serial ports. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MsChannelConfigEntry | |||
| msChannelConfigEntry | 1.3.6.1.4.1.1751.2.18.3.4.1 | ||
| Row definition for multi-serial channel config. | |||
| OBJECT-TYPE | |||
| MsChannelConfigEntry | |||
| msChannelId | 1.3.6.1.4.1.1751.2.18.3.4.1.1 | ||
| interface index - SSPPCCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| msChannelIfType | 1.3.6.1.4.1.1751.2.18.3.4.1.2 | ||
| interface type for multi-serial port | |||
| OBJECT-TYPE | |||
| INTEGER | unconfigured(1), atmUni3-0(2), atmUni3-1(3), iispUser(4), iispNetwork(5), circuitEmulation(6), terminalEmulation(7), frameRelayUni(8), hdlcPassThrough(9), frameRelayNni(10), atmPnni1-0(11), atmUni4-0(12) | ||
| msChannelCellBearingMode | 1.3.6.1.4.1.1751.2.18.3.4.1.3 | ||
| The cell delineation mode is either LANET or CCITT based | |||
| OBJECT-TYPE | |||
| INTEGER | lanet(1), ccittDirectMapping(2), none(3) | ||
| msChannelCellBearingAddrMode | 1.3.6.1.4.1.1751.2.18.3.4.1.4 | ||
| standard - ATM Forum UNI 3.0/3.1 noiseTolerant - A proprietary noise tolerant address mapping scheme | |||
| OBJECT-TYPE | |||
| INTEGER | standard(1), noiseTolerant(2) | ||
| msChannelCellBearingPayloadFec | 1.3.6.1.4.1.1751.2.18.3.4.1.5 | ||
| payload error correction scheme | |||
| OBJECT-TYPE | |||
| INTEGER | dynamic(1), threeEighthsRate(2), oneQuarterRate(3), oneEighthRate(4) | ||
| msChannelSecuFeature | 1.3.6.1.4.1.1751.2.18.3.4.1.6 | ||
| enhancement feature | |||
| OBJECT-TYPE | |||
| INTEGER | unsecurable(1), secured(2), securable(3) | ||
| oc3ChannelConfigTable | 1.3.6.1.4.1.1751.2.18.3.5 | ||
| Table of common physical Port attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Oc3ChannelConfigEntry | |||
| oc3ChannelConfigEntry | 1.3.6.1.4.1.1751.2.18.3.5.1 | ||
| Row definition for common physical port attributes | |||
| OBJECT-TYPE | |||
| Oc3ChannelConfigEntry | |||
| oc3ChannelId | 1.3.6.1.4.1.1751.2.18.3.5.1.1 | ||
| interface index - SSPPCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| oc3ChannelIfType | 1.3.6.1.4.1.1751.2.18.3.5.1.2 | ||
| UNI or NNI type | |||
| OBJECT-TYPE | |||
| INTEGER | unconfigured(1), atmUni3-0(2), atmUni3-1(3), iispUser(4), iispNetwork(5), atmPnni1-0(6), atmUni4-0(7), atmVnnUni3-1(8) | ||
| oc3ChannelSecuFeature | 1.3.6.1.4.1.1751.2.18.3.5.1.3 | ||
| enhancement feature | |||
| OBJECT-TYPE | |||
| INTEGER | unsecurable(1), secured(2), securable(3) | ||
| twoWireSourceChannelConfigTable | 1.3.6.1.4.1.1751.2.18.3.6 | ||
| Table of common physical Port attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| TwoWireSourceChannelConfigEntry | |||
| twoWireSourceChannelConfigEntry | 1.3.6.1.4.1.1751.2.18.3.6.1 | ||
| Row definition for common physical port attributes | |||
| OBJECT-TYPE | |||
| TwoWireSourceChannelConfigEntry | |||
| twoWireSourceChannelId | 1.3.6.1.4.1.1751.2.18.3.6.1.1 | ||
| interface index - SSPPCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| twoWireSourceChannelIfType | 1.3.6.1.4.1.1751.2.18.3.6.1.2 | ||
| Interface types of 2W station(source) channel. | |||
| OBJECT-TYPE | |||
| INTEGER | unconfigured(1), circuitEmulation(2) | ||
| twoWireSourceChannelConnectionType | 1.3.6.1.4.1.1751.2.18.3.6.1.3 | ||
| This field selects ATM virtual circuit connection type, PVC or SVC. | |||
| OBJECT-TYPE | |||
| INTEGER | pvc(1), svc(2) | ||
| twoWireSourceChannelCompandingLaw | 1.3.6.1.4.1.1751.2.18.3.6.1.4 | ||
| This field selects channel encoding/decoding quantization interval, muLaw or aLaw. | |||
| OBJECT-TYPE | |||
| INTEGER | muLawPCM(1), aLawPCM(2) | ||
| twoWireSourceChannelSecuFeature | 1.3.6.1.4.1.1751.2.18.3.6.1.5 | ||
| enhancement feature | |||
| OBJECT-TYPE | |||
| INTEGER | unsecurable(1), secured(2), securable(3) | ||
| twoWireSourceChannelVoiceCompression | 1.3.6.1.4.1.1751.2.18.3.6.1.6 | ||
| voice compression scheme | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), adpcm32k(2), adpcm16k(3), adpcm8k(4) | ||
| twoWireSourceChannelEchoCancellation | 1.3.6.1.4.1.1751.2.18.3.6.1.7 | ||
| This field disables/enables twoWireSource card echo cancellation function. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| twoWireSourceChannelSilenceSupression | 1.3.6.1.4.1.1751.2.18.3.6.1.8 | ||
| This field disables/enables twoWireSource card silence suppression. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| twoWireSourceChannelEncapsulationAal | 1.3.6.1.4.1.1751.2.18.3.6.1.9 | ||
| This field selects ATM cell payload format. Aal1 - ATM Adaption Layer Type 1. Yurie - A proprietary specific ATM cell payload format for compressed data. | |||
| OBJECT-TYPE | |||
| INTEGER | aal1(1), lucent(2) | ||
| twoWireSourceChannelSubscriberService | 1.3.6.1.4.1.1751.2.18.3.6.1.10 | ||
| This field selects subscribed channel service types. plar - Private Line Automatic Ring fxs - Foreign Exchange Subscriber End s-signaling - A proprietary specific signaling type based on AIN model. | |||
| OBJECT-TYPE | |||
| INTEGER | plar(1), fxs(2), s-signaling(3) | ||
| highSpeedChannelConfigTable | 1.3.6.1.4.1.1751.2.18.3.7 | ||
| Table of common physical Port attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| HighSpeedChannelConfigEntry | |||
| highSpeedChannelConfigEntry | 1.3.6.1.4.1.1751.2.18.3.7.1 | ||
| Row definition for common physical port attributes | |||
| OBJECT-TYPE | |||
| HighSpeedChannelConfigEntry | |||
| highSpeedChannelId | 1.3.6.1.4.1.1751.2.18.3.7.1.1 | ||
| interface index - SSPPCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| highSpeedChannelIfType | 1.3.6.1.4.1.1751.2.18.3.7.1.2 | ||
| UNI or NNI type | |||
| OBJECT-TYPE | |||
| INTEGER | unconfigured(1), atmUni3-0(2), atmUni3-1(3), iispUser(4), iispNetwork(5), circuitEmulation(6), atmUni4-0(7) | ||
| dspChannelConfigTable | 1.3.6.1.4.1.1751.2.18.3.8 | ||
| Table of common physical Port attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DspChannelConfigEntry | |||
| dspChannelConfigEntry | 1.3.6.1.4.1.1751.2.18.3.8.1 | ||
| Row definition for common physical port attributes | |||
| OBJECT-TYPE | |||
| DspChannelConfigEntry | |||
| dspChannelId | 1.3.6.1.4.1.1751.2.18.3.8.1.1 | ||
| interface index - SSPPCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| dspChannelIfType | 1.3.6.1.4.1.1751.2.18.3.8.1.2 | ||
| Channel Interface Type | |||
| OBJECT-TYPE | |||
| INTEGER | unconfigured(1), dsp(2) | ||
| dspChannelInputCodingRule | 1.3.6.1.4.1.1751.2.18.3.8.1.3 | ||
| Input Coding Rule | |||
| OBJECT-TYPE | |||
| INTEGER | muLawPCM(1) | ||
| dspChannelVoiceCompression | 1.3.6.1.4.1.1751.2.18.3.8.1.4 | ||
| voice compression scheme | |||
| OBJECT-TYPE | |||
| INTEGER | adpcm32k(1), adpcm16k(2) | ||
| dspChannelEchoCancellation | 1.3.6.1.4.1.1751.2.18.3.8.1.5 | ||
| voice compression scheme | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1) | ||
| dspChannelSilenceSupression | 1.3.6.1.4.1.1751.2.18.3.8.1.6 | ||
| voice compression scheme | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1) | ||
| twoWireSinkChannelConfigTable | 1.3.6.1.4.1.1751.2.18.3.9 | ||
| Table of common physical Port attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| TwoWireSinkChannelConfigEntry | |||
| twoWireSinkChannelConfigEntry | 1.3.6.1.4.1.1751.2.18.3.9.1 | ||
| Row definition for common physical port attributes | |||
| OBJECT-TYPE | |||
| TwoWireSinkChannelConfigEntry | |||
| twoWireSinkChannelId | 1.3.6.1.4.1.1751.2.18.3.9.1.1 | ||
| interface index - SSPPCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| twoWireSinkChannelIfType | 1.3.6.1.4.1.1751.2.18.3.9.1.2 | ||
| Interface types. | |||
| OBJECT-TYPE | |||
| INTEGER | unconfigured(1), circuitEmulation(2) | ||
| twoWireSinkChannelConnectionType | 1.3.6.1.4.1.1751.2.18.3.9.1.3 | ||
| This field selects ATM virtual circuit connection type, PVC or SVC. | |||
| OBJECT-TYPE | |||
| INTEGER | pvc(1), svc(2) | ||
| twoWireSinkChannelCompandingLaw | 1.3.6.1.4.1.1751.2.18.3.9.1.4 | ||
| This field selects channel encoding/decoding quantization interval, muLaw or aLaw. | |||
| OBJECT-TYPE | |||
| INTEGER | muLawPCM(1), aLawPCM(2) | ||
| twoWireSinkChannelVoiceCompression | 1.3.6.1.4.1.1751.2.18.3.9.1.5 | ||
| voice compression scheme | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), adpcm32k(2), adpcm16k(3), adpcm8k(4) | ||
| twoWireSinkChannelEchoCancellation | 1.3.6.1.4.1.1751.2.18.3.9.1.6 | ||
| This field disables/enables twoWireSink card echo cancellation function. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| twoWireSinkChannelSilenceSupression | 1.3.6.1.4.1.1751.2.18.3.9.1.7 | ||
| This field disables/enables twoWireSink card silence suppression. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| twoWireSinkChannelEncapsulationAal | 1.3.6.1.4.1.1751.2.18.3.9.1.8 | ||
| This field selects ATM cell payload format. Aal1 - ATM Adaption Layer Type 1. Yurie - A proprietary specific ATM cell payload format for compressed data. | |||
| OBJECT-TYPE | |||
| INTEGER | aal1(1), lucent(2) | ||
| twoWireSinkChannelSubscriberService | 1.3.6.1.4.1.1751.2.18.3.9.1.9 | ||
| The only available service type for twoWireSink card is Foreign Exchange Office End (fxo). | |||
| OBJECT-TYPE | |||
| INTEGER | fxo(1) | ||
| e3ChannelConfigTable | 1.3.6.1.4.1.1751.2.18.3.10 | ||
| Table of common physical channel attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| E3ChannelConfigEntry | |||
| e3ChannelConfigEntry | 1.3.6.1.4.1.1751.2.18.3.10.1 | ||
| Row definition for common physical channel attributes | |||
| OBJECT-TYPE | |||
| E3ChannelConfigEntry | |||
| e3ChannelId | 1.3.6.1.4.1.1751.2.18.3.10.1.1 | ||
| interface index - SSPPCCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| e3ChannelIfType | 1.3.6.1.4.1.1751.2.18.3.10.1.2 | ||
| Interface type configured on E3 channel | |||
| OBJECT-TYPE | |||
| INTEGER | unconfigured(1), atmUni3-0(2), atmUni3-1(3), iispUser(4), iispNetwork(5), atmPnni1-0(6), atmUni4-0(7), circuitEmulation(8) | ||
| e3ChannelSecuFeature | 1.3.6.1.4.1.1751.2.18.3.10.1.3 | ||
| enhancement feature | |||
| OBJECT-TYPE | |||
| INTEGER | unsecurable(1), secured(2), securable(3) | ||
| e1ChannelConfigTable | 1.3.6.1.4.1.1751.2.18.3.11 | ||
| Table of common physical Port attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| E1ChannelConfigEntry | |||
| e1ChannelConfigEntry | 1.3.6.1.4.1.1751.2.18.3.11.1 | ||
| Row definition for common physical port attributes | |||
| OBJECT-TYPE | |||
| E1ChannelConfigEntry | |||
| e1ChannelId | 1.3.6.1.4.1.1751.2.18.3.11.1.1 | ||
| interface index - SSPPCCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| e1ChannelIfType | 1.3.6.1.4.1.1751.2.18.3.11.1.2 | ||
| UNI or NNI type for ATM ,Frame Relay, or ISDN serviceinterface type for channel | |||
| OBJECT-TYPE | |||
| INTEGER | unconfigured(1), atmUni3-0(2), atmUni3-1(3), iispUser(4), iispNetwork(5), circuitEmulation(6), frameRelayUni(7), hdlcPassThrough(8), frameRelayNni(9), atmIma(10), atmPnni1-0(11), pri-isdn-network(12), pri-isdn-user(13), casTrunkLine(14), atmUni4-0(15) | ||
| e1ChannelDs0Map | 1.3.6.1.4.1.1751.2.18.3.11.1.3 | ||
| bit map of DS0 in channel | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(4) | ||
| e1ChannelCellMapping | 1.3.6.1.4.1.1751.2.18.3.11.1.4 | ||
| cell delineation mode for ATM cell bearing services | |||
| OBJECT-TYPE | |||
| INTEGER | directMapping(1), none(2) | ||
| e1ChannelInputCodingRule | 1.3.6.1.4.1.1751.2.18.3.11.1.5 | ||
| enhancement feature | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), muLawPCM(2), aLawPCM(3), digital(4) | ||
| e1ChannelSecuFeature | 1.3.6.1.4.1.1751.2.18.3.11.1.6 | ||
| enhancement feature | |||
| OBJECT-TYPE | |||
| INTEGER | unsecurable(1), secured(2), securable(3) | ||
| e1ChannelSignaling | 1.3.6.1.4.1.1751.2.18.3.11.1.7 | ||
| Refers to robbed-bit singaling in circuitEmulation interface. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| ethernetChannelConfigTable | 1.3.6.1.4.1.1751.2.18.3.12 | ||
| Table used for enthernet channel configuration. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| EthernetChannelConfigEntry | |||
| ethernetChannelConfigEntry | 1.3.6.1.4.1.1751.2.18.3.12.1 | ||
| Row definition for enthernet channel attributes. | |||
| OBJECT-TYPE | |||
| EthernetChannelConfigEntry | |||
| ethernetChannelId | 1.3.6.1.4.1.1751.2.18.3.12.1.1 | ||
| Interface index | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ethernetChannelIfType | 1.3.6.1.4.1.1751.2.18.3.12.1.2 | ||
| Types of ethernet interface. There are two types of bridging interface(channel):bridge and routing. | |||
| OBJECT-TYPE | |||
| INTEGER | unconfigured(1), bridge(2), routing(3) | ||
| dsp2Channel | 1.3.6.1.4.1.1751.2.18.3.13 | ||
| OBJECT IDENTIFIER | |||
| dsp2ChannelConfigTable | 1.3.6.1.4.1.1751.2.18.3.13.1 | ||
| Table of Channel attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dsp2ChannelConfigEntry | |||
| dsp2ChannelConfigEntry | 1.3.6.1.4.1.1751.2.18.3.13.1.1 | ||
| Row definition for common physical port attributes | |||
| OBJECT-TYPE | |||
| Dsp2ChannelConfigEntry | |||
| dsp2ChannelId | 1.3.6.1.4.1.1751.2.18.3.13.1.1.1 | ||
| interface index - SSPPCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| dsp2ChannelIfType | 1.3.6.1.4.1.1751.2.18.3.13.1.1.2 | ||
| Channel Interface Type | |||
| OBJECT-TYPE | |||
| INTEGER | unconfigured(1), dsp2(2) | ||
| dsp2ChannelAlarmType | 1.3.6.1.4.1.1751.2.18.3.13.1.1.3 | ||
| This field is a read only failure which gives the status of a dsp.When the status is dspFailure the Operational Status at the interface level will go OOS | |||
| OBJECT-TYPE | |||
| INTEGER | noAlarm(1), dspFailure(2) | ||
| dsp2ChannelModeConfig | 1.3.6.1.4.1.1751.2.18.3.13.1.1.4 | ||
| This field is used to configure the mode of the DSP card. Each mode corresponds to a set of algorithms supported by the IO card. The complete list of enumerations of supported algorithms is given in the dsp2AlgorithmTable. The following description outlines the algorithms supported in each corresponding AlgoSet. algoSet1 : g168-echo-cancellation128ms algoSet2 : g726-voice-compression, g165-echo-cancellation, generic-silence-suppression, fax-modem-tone-detection, g168-echo-cancellation64ms. algoSet3 : g729a-voice-compression, g165-echo-cancellation, g729b-silence-suppression, fax-modem-tone-detection, g168-echo-cancellation64ms. algoSet4 : v17-fax-algorithm-upto-14400-bps, v29-fax-algorithm-upto-9600-bps, v27ter-fax-algorithm-upto-2400-bps, v21-fax-algorithm-upto-300-bps. algoSet5 : g168-echo-cancellation64ms. algoSet6 : g726-voice-compression, g729a-voice-compression, g729b-silence-suppression, g168-echo-cancellation64ms, v17-fax-algorithm-upto-14400-bps, v29-fax-algorithm-upto-9600-bps, v27ter-fax-algorithm-upto-2400-bps, v21-fax-algorithm-upto-300-bps. | |||
| OBJECT-TYPE | |||
| INTEGER | algoSet1(1), algoSet2(2), algoSet3(3), algoSet4(4), algoSet5(5), algoSet6(6) | ||
| dsp2AlgorithmTable | 1.3.6.1.4.1.1751.2.18.3.13.2 | ||
| Table of dsp2 algorithms assigned to interface. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dsp2AlgorithmEntry | |||
| dsp2AlgorithmEntry | 1.3.6.1.4.1.1751.2.18.3.13.2.1 | ||
| Row definition for dsp2 algorithms assigned to interfaces. | |||
| OBJECT-TYPE | |||
| Dsp2AlgorithmEntry | |||
| dsp2AlgorithmId | 1.3.6.1.4.1.1751.2.18.3.13.2.1.1 | ||
| interface index - SSPPCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| dsp2AlgorithmType | 1.3.6.1.4.1.1751.2.18.3.13.2.1.2 | ||
| DSP Algorithm type. | |||
| OBJECT-TYPE | |||
| INTEGER | g726-voice-compression(1), g165-echo-cancellation(2), generic-silence-suppression(3), fax-modem-tone-detection(4), g729a-voice-compression(5), g729b-silence-suppression(6), g168-echo-cancellation64ms(7), g168-echo-cancellation128ms(8), v17-fax-algorithm-upto-14400-bps(9), v29-fax-algorithm-upto-9600-bps(10), v27ter-fax-algorithm-upto-2400-bps(11), v21-fax-algorithm-upto-300-bps(12) | ||
| imaGrpChannelConfigTable | 1.3.6.1.4.1.1751.2.18.3.14 | ||
| Table used for the IMA virtual channel (group) configuration on cards that have physical interfaces configured as atmIma. Represents three channels that can be configured as IMA groups on port 7 of DS1 and E1 cards. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ImaGrpChannelConfigEntry | |||
| imaGrpChannelConfigEntry | 1.3.6.1.4.1.1751.2.18.3.14.1 | ||
| Row definition for common physical port attributes | |||
| OBJECT-TYPE | |||
| ImaGrpChannelConfigEntry | |||
| imaGrpChannelId | 1.3.6.1.4.1.1751.2.18.3.14.1.1 | ||
| interface index - SSPPCCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| imaGrpChannelIfType | 1.3.6.1.4.1.1751.2.18.3.14.1.2 | ||
| interface type | |||
| OBJECT-TYPE | |||
| INTEGER | unconfigured(1), atmUni3-0(2), atmUni3-1(3), iispUser(4), iispNetwork(5), atmPnni1-0(6), atmUni4-0(7) | ||
| imaGrpChannelPortMap | 1.3.6.1.4.1.1751.2.18.3.14.1.3 | ||
| A bitmap that identifies the physical IMA interfaces in this group. The least significant bit represents port 1. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| imaGrpChannelNeState | 1.3.6.1.4.1.1751.2.18.3.14.1.4 | ||
| The current operational state of the near-end IMA Group State Machine. | |||
| OBJECT-TYPE | |||
| ImaGrpChannelEndState | |||
| imaGrpChannelFeState | 1.3.6.1.4.1.1751.2.18.3.14.1.5 | ||
| The current operational state of the far-end IMA Group State Machine. | |||
| OBJECT-TYPE | |||
| ImaGrpChannelEndState | |||
| imaGrpChannelFailureStatus | 1.3.6.1.4.1.1751.2.18.3.14.1.6 | ||
| The current failure status of the IMA group (the reason why the GTSM is in the down state). noFailure(1) no failure startUpNe(2) near-end is in the state of start-up startUpFe(3) far-end is in the state of start-up invalidMValueNe(4) near-end has invalid frame length invalidMValueFe(5) far-end has invalid frame length failedAssymetricNe(6) near-end failed due to incompatable symmetry failedAssymetricFe(7) far-end failed due to incompatable symmetry insuffLinksNe(8) Near-end reported less than the min number of Tx links are active or less than the min number of Rx links are active insuffLinksFe(9) Far-end reported less than the min number of Rx links are active or less than thenmin number of Tx links are active blockedNe(10) Near-end is administratively out-of-service blockedFe(11) Far-end is administratively out-of-service otherFailure(12) other failures | |||
| OBJECT-TYPE | |||
| INTEGER | noFailure(1), startUpNe(2), startUpFe(3), invalidMValueNe(4), invalidMValueFe(5), failedAssymetricNe(6), failedAssymetricFe(7), insuffLinksNe(8), insuffLinksFe(9), blockedNe(10), blockedFe(11), otherFailure(12) | ||
| imaGrpChannelSymmetry | 1.3.6.1.4.1.1751.2.18.3.14.1.7 | ||
| Symmetry of the IMA group. Symmetric configuration: all ports of IMA group are configured as full-duplex. With symmetric configuration, operation is symmetric if no links failes; is asymmetric if a link fails so that the active forward and backward links between far-end and near-end are asymmetric. If the configuration is asymmetric, the operation can never be symmetric. | |||
| OBJECT-TYPE | |||
| INTEGER | symOperation(1), asymOperation(2), asymConfiguration(3) | ||
| imaGrpChannelMinNumTxLinks | 1.3.6.1.4.1.1751.2.18.3.14.1.8 | ||
| Minimum number of transmit links required to be Active for the IMA group to be in the Up state. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..32 | ||
| imaGrpChannelMinNumRxLinks | 1.3.6.1.4.1.1751.2.18.3.14.1.9 | ||
| Minimum number of receive links required to be Active for the IMA group to be in the Up state. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..32 | ||
| imaGrpChannelNeTxClkMode | 1.3.6.1.4.1.1751.2.18.3.14.1.10 | ||
| Transmit clocking mode used by the near-end IMA group. There are two possible modes: the Common Transmit Clock (CTC) and the Independent Transmit Clock (ITC). The CTC mode corresponds to the case when the transmit clock of all IMA links are derived from the same source. The ITC configuration corresponds to the case where there is at least one IMA link whose transmit clock is derived from a source different than at least another link transmit clock. The underlying clock configuration must be set up by the user to ensure operation in the selected mode. | |||
| OBJECT-TYPE | |||
| INTEGER | ctc(1), itc(2) | ||
| imaGrpChannelFeTxClkMode | 1.3.6.1.4.1.1751.2.18.3.14.1.11 | ||
| Transmit clocking mode used by the far-end IMA group. There are two possible modes: the Common Transmit Clock (CTC) and the Independent Transmit Clock (ITC). The CTC mode corresponds to the case when the transmit clock of all IMA links are derived from the same source. The ITC configuration corresponds to the case where there is at least one IMA link whose transmit clock is derived from a source different than at least another link transmit clock. | |||
| OBJECT-TYPE | |||
| INTEGER | ctc(1), itc(2) | ||
| imaGrpChannelTxImaId | 1.3.6.1.4.1.1751.2.18.3.14.1.12 | ||
| The IMA ID currently in use by the near-end IMA function. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| imaGrpChannelRxImaId | 1.3.6.1.4.1.1751.2.18.3.14.1.13 | ||
| The IMA ID currently in use by the far-end IMA function. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| imaGrpChannelTxFrameLength | 1.3.6.1.4.1.1751.2.18.3.14.1.14 | ||
| The frame length to be used by the IMA group in the transmit direction. Can only be set when the IMA group is startup. | |||
| OBJECT-TYPE | |||
| INTEGER | m32(32), m64(64), m128(128), m256(256) | ||
| imaGrpChannelRxFrameLength | 1.3.6.1.4.1.1751.2.18.3.14.1.15 | ||
| Value of IMA frame length as received from remote IMA function. | |||
| OBJECT-TYPE | |||
| INTEGER | m32(32), m64(64), m128(128), m256(256) | ||
| imaGrpChannelDiffLinkDelayMax | 1.3.6.1.4.1.1751.2.18.3.14.1.16 | ||
| The maximum number of milliseconds of delay differential among the links that will be tolerated on this interface. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..200 | ||
| imaGrpChannelLeastDelayLink | 1.3.6.1.4.1.1751.2.18.3.14.1.17 | ||
| The Interface Index of the link configured in the IMA group which has the smallest link propagation delay. This value has meaning only if at least 1 link has been configured in the IMA group. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| imaGrpChannelDiffDelayMaxObs | 1.3.6.1.4.1.1751.2.18.3.14.1.18 | ||
| The latest maximum differential delay observed (in milliseconds), i.e. between the links having the least and most link propagation delay, among the receive links that are currently configured in the IMA group. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| imaGrpChannelAlphaValue | 1.3.6.1.4.1.1751.2.18.3.14.1.19 | ||
| This indicates the 'alpha' value used to specify the number of consecutive invalid ICP cells to be detected before moving to the IMA HUNT state. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..2 | ||
| imaGrpChannelBetaValue | 1.3.6.1.4.1.1751.2.18.3.14.1.20 | ||
| This indicates the 'beta' value used to specify the number of consecutive errored ICP cells to be detected before moving to the IMA HUNT state. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..5 | ||
| imaGrpChannelGammaValue | 1.3.6.1.4.1.1751.2.18.3.14.1.21 | ||
| This indicates the 'gamma' value used to specify the number of consecutive valid ICP cells to be detected before moving to the IMA SYNC state from the PRESYNC state. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..5 | ||
| imaGrpChannelStatsNeNumFailures | 1.3.6.1.4.1.1751.2.18.3.14.1.22 | ||
| The number of times a near-end group failure (Config-Abort, Insufficient-Links) has been reported. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| imaGrpChannelStatsFeNumFailures | 1.3.6.1.4.1.1751.2.18.3.14.1.23 | ||
| The number of times a far-end group failure (Config-Abort-FE, Insufficient-Links-FE, Blocked-FE) has been reported. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| imaGrpChannelStatsNumTxActLnks | 1.3.6.1.4.1.1751.2.18.3.14.1.24 | ||
| The number of links which are configured to transmit and are currently Active in this IMA group. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| imaGrpChannelStatsNumRxActLnks | 1.3.6.1.4.1.1751.2.18.3.14.1.25 | ||
| The number of links which are configured to receive and are currently Active in this IMA group. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| imaGrpChannelStatsTimer | 1.3.6.1.4.1.1751.2.18.3.14.1.26 | ||
| Time, in seconds, since last reset. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| imaGrpChannelCompatMode | 1.3.6.1.4.1.1751.2.18.3.14.1.27 | ||
| This is used to indicate interoperability mode to the I/O card in terms of reporting the link status at the correct location in the IMA Control Protocol (ICP) cell | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| tasmChannelConfigTable | 1.3.6.1.4.1.1751.2.18.3.15 | ||
| Table of common physical Channel attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| TasmChannelConfigEntry | |||
| tasmChannelConfigEntry | 1.3.6.1.4.1.1751.2.18.3.15.1 | ||
| Row definition for common physical channel attributes | |||
| OBJECT-TYPE | |||
| TasmChannelConfigEntry | |||
| tasmChannelId | 1.3.6.1.4.1.1751.2.18.3.15.1.1 | ||
| Interface index - SSPPCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| tasmChannelIfType | 1.3.6.1.4.1.1751.2.18.3.15.1.2 | ||
| Channel Interface Type | |||
| OBJECT-TYPE | |||
| INTEGER | unconfigured(1), toneAnnce(2) | ||
| tasmChannelAlarmType | 1.3.6.1.4.1.1751.2.18.3.15.1.3 | ||
| This field is a read only failure which gives the status of a DSP in the TASM card.When the status is tasmFailure the Operational Status at the interface level will go OOS | |||
| OBJECT-TYPE | |||
| INTEGER | noAlarm(1), tasmFailure(2) | ||
| tasmChannelModeConfig | 1.3.6.1.4.1.1751.2.18.3.15.1.4 | ||
| This field is used to configure the mdoe in which a TASM DSP will be used asd a resource. The modes are explained as follows: casMode: DSP resource is used for DTMF/MF tone detection/generation and running the Type 100, 105, and 108 tests. tasMode: DSP resource is used for playing/compressing announcement. | |||
| OBJECT-TYPE | |||
| INTEGER | casMode(1), tasMode(2) | ||
| intfConfig | 1.3.6.1.4.1.1751.2.18.5 | ||
| OBJECT IDENTIFIER | |||
| atmUniConfigTable | 1.3.6.1.4.1.1751.2.18.5.1 | ||
| Table of atm user to network interface (UNI) | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmUniConfigEntry | |||
| atmUniConfigEntry | 1.3.6.1.4.1.1751.2.18.5.1.1 | ||
| Row definition of atm UNI | |||
| OBJECT-TYPE | |||
| AtmUniConfigEntry | |||
| atmUniIfIndex | 1.3.6.1.4.1.1751.2.18.5.1.1.1 | ||
| interface index (slot/port/channel) SSPPCCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmUniAddrType | 1.3.6.1.4.1.1751.2.18.5.1.1.2 | ||
| atm address type | |||
| OBJECT-TYPE | |||
| INTEGER | nsap(1), e164(2), private(3) | ||
| atmUniSvcMinVpi | 1.3.6.1.4.1.1751.2.18.5.1.1.3 | ||
| The lower bound of the VPI for SVC connections. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmUniSvcMaxVpi | 1.3.6.1.4.1.1751.2.18.5.1.1.4 | ||
| The upper bound of the VPI for SVC connections. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmUniSvcMinVci | 1.3.6.1.4.1.1751.2.18.5.1.1.5 | ||
| The lower bound of the VCI for SVC connections. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmUniSvcMaxVci | 1.3.6.1.4.1.1751.2.18.5.1.1.6 | ||
| The upper bound of the VCI for SVC connections. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmUniAdminStatus | 1.3.6.1.4.1.1751.2.18.5.1.1.7 | ||
| The administrative action: 'outOfService' means take the UNI out of service 'inService' means take the UNI in service 'delete' remove/deconfigure the UNI. | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2), delete(3) | ||
| atmUniOperStatus | 1.3.6.1.4.1.1751.2.18.5.1.1.8 | ||
| The operational status of the UNI: 'outOfService' means the UNI is out of service 'inService' means the UNI is in service | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| atmUniNwPrefix1 | 1.3.6.1.4.1.1751.2.18.5.1.1.9 | ||
| ATM Network Prefix 1 | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(13) | ||
| atmUniOverSubscription | 1.3.6.1.4.1.1751.2.18.5.1.1.10 | ||
| Over subscription factor | |||
| OBJECT-TYPE | |||
| INTEGER | 1..100 | ||
| atmUniT303 | 1.3.6.1.4.1.1751.2.18.5.1.1.11 | ||
| Timer T303 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmUniT308 | 1.3.6.1.4.1.1751.2.18.5.1.1.12 | ||
| Timer T308 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmUniT309 | 1.3.6.1.4.1.1751.2.18.5.1.1.13 | ||
| Timer T309 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmUniT310 | 1.3.6.1.4.1.1751.2.18.5.1.1.14 | ||
| Timer T310 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmUniT313 | 1.3.6.1.4.1.1751.2.18.5.1.1.15 | ||
| Timer T313 value - User side only - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmUniT316 | 1.3.6.1.4.1.1751.2.18.5.1.1.16 | ||
| Timer T316 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmUniT317 | 1.3.6.1.4.1.1751.2.18.5.1.1.17 | ||
| Timer T317 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmUniT322 | 1.3.6.1.4.1.1751.2.18.5.1.1.18 | ||
| Timer T322 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmUniT398 | 1.3.6.1.4.1.1751.2.18.5.1.1.19 | ||
| Timer T398 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmUniT399 | 1.3.6.1.4.1.1751.2.18.5.1.1.20 | ||
| Timer T399 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmUniMyNeighborIpAddress | 1.3.6.1.4.1.1751.2.18.5.1.1.21 | ||
| The IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can send SNMP messages, as IP datagrams sent to UDP port 161, in order to access network management information concerning the operation of that system. Note that the value of this object can currently only be obtained by manual configuration. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| atmUniMyNeighborIfName | 1.3.6.1.4.1.1751.2.18.5.1.1.22 | ||
| The textual name of the interface on the neighbor system on the far end of this interface, and to which this interface connects. If the neighbor system is manageable through SNMP and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. If this interface does not have a textual name, the value of this object is a zero length string. Note that the value of this object can currently only be obtained by manual configuration. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(20) | ||
| atmUniVpiSig | 1.3.6.1.4.1.1751.2.18.5.1.1.23 | ||
| VPI value for the signalling channel for the UNI interface. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmUniVciSig | 1.3.6.1.4.1.1751.2.18.5.1.1.24 | ||
| VCI value for the signalling channel for the UNI interface. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..31 | ||
| atmUniVpiIlmi | 1.3.6.1.4.1.1751.2.18.5.1.1.25 | ||
| VPI value for the ilmi channel for the UNI interface. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmUniVciIlmi | 1.3.6.1.4.1.1751.2.18.5.1.1.26 | ||
| VCI value for the ilmi channel for the UNI interface. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..31 | ||
| atmUniAtmSignalingStatus | 1.3.6.1.4.1.1751.2.18.5.1.1.27 | ||
| Indicates if atm signaling is enabled or disabled for this interface. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmUniMyIfName | 1.3.6.1.4.1.1751.2.18.5.1.1.29 | ||
| A textual name of this interface. If this system is manageable manageable through SNMP and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. This interface must be uniquely named on this system to distinguish parallel links with a neighboring system. If this interface does not have a textual name, the value of this object is a zero length string. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(20) | ||
| atmUniIlmiProtocolStatus | 1.3.6.1.4.1.1751.2.18.5.1.1.30 | ||
| The administrative status: 'enabled' - ILMI protocol enabled on UNI 'disabled' - ILMI protocol disabled on UNI. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmUniIlmiOperStatus | 1.3.6.1.4.1.1751.2.18.5.1.1.31 | ||
| The operational status: 'outOfService' - ILMI connectivity is down 'inService' - ILMI connectivity is up. | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| atmUniIlmiConfigProc | 1.3.6.1.4.1.1751.2.18.5.1.1.32 | ||
| ILMI Configuration Procedure status. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmUniIlmiConnectProc | 1.3.6.1.4.1.1751.2.18.5.1.1.33 | ||
| ILMI Connectivity Procedure status. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmUniIlmiAttachPtProc | 1.3.6.1.4.1.1751.2.18.5.1.1.34 | ||
| ILMI Attachment Point Procedure status. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmUniIlmiSecureLinkProc | 1.3.6.1.4.1.1751.2.18.5.1.1.35 | ||
| ILMI Secure Link Procedure status. Can be enabled only if Attachment Point Procedure is enabled. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmUniIlmiAddrRegProc | 1.3.6.1.4.1.1751.2.18.5.1.1.36 | ||
| ILMI Address Registration Procedure status. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmUniIlmiTimerS | 1.3.6.1.4.1.1751.2.18.5.1.1.37 | ||
| Timer S (secs). Used to poll peer when link is down. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmUniIlmiTimerT | 1.3.6.1.4.1.1751.2.18.5.1.1.38 | ||
| Timer T (secs). Used to poll peer when link is up. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmUniIlmiRetryK | 1.3.6.1.4.1.1751.2.18.5.1.1.39 | ||
| Retry K - number of timeouts before link is declared down. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmUniIntfType | 1.3.6.1.4.1.1751.2.18.5.1.1.40 | ||
| atm interface type | |||
| OBJECT-TYPE | |||
| INTEGER | user(1), network(2) | ||
| atmUniUserAddress | 1.3.6.1.4.1.1751.2.18.5.1.1.41 | ||
| ATM User Address | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(7) | ||
| atmUniViSuppFlag | 1.3.6.1.4.1.1751.2.18.5.1.1.42 | ||
| virtual interface supp off/on | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| atmUniUPCSupp | 1.3.6.1.4.1.1751.2.18.5.1.1.43 | ||
| upc supp off/on | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| atmUniUbrLoadBalSupp | 1.3.6.1.4.1.1751.2.18.5.1.1.44 | ||
| load balancing supp for ubr conns off/on | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| atmUniAvailBwIgr | 1.3.6.1.4.1.1751.2.18.5.1.1.45 | ||
| The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmUniAvailBwEgr | 1.3.6.1.4.1.1751.2.18.5.1.1.46 | ||
| The Avail Bandwidth for that interface in cells per sec which can go out of the interface. Bandwidth for UBR conns will not be accounted for | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmUniVUNISuppFlag | 1.3.6.1.4.1.1751.2.18.5.1.1.47 | ||
| virtual UNI interface supp off/on | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| atmUniUserAddrOrgScope | 1.3.6.1.4.1.1751.2.18.5.1.1.48 | ||
| ATM User Address Organizational scope | |||
| OBJECT-TYPE | |||
| INTEGER | localNetwork(1), localNetworkPlusOne(2), localNetworkPlusTwo(3), siteMinusOne(4), intraSite(5), sitePlusOne(6), organizationMinusOne(7), intraOrganization(8), organizationPlusOne(9), communityMinusOne(10), intraCommunity(11), communityPlusOne(12), regional(13), interRegional(14), global(15) | ||
| atmUniSscopRxWndSz | 1.3.6.1.4.1.1751.2.18.5.1.1.49 | ||
| The receive window size for the SSCOP layer | |||
| OBJECT-TYPE | |||
| INTEGER | 8..256 | ||
| atmUniConnTrafficShapingFlag | 1.3.6.1.4.1.1751.2.18.5.1.1.50 | ||
| Traffic Shaping for Conn was enabled primarily because the core would lose cells since we were non-conformant cells. Therefore the hardware added traffic shaping per connection. But condition is VI should not be enabled if this feature is enabled. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| atmIispConfigTable | 1.3.6.1.4.1.1751.2.18.5.2 | ||
| Table of atm iisp interface | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmIispConfigEntry | |||
| atmIispConfigEntry | 1.3.6.1.4.1.1751.2.18.5.2.1 | ||
| Row definition of atm iisp interface | |||
| OBJECT-TYPE | |||
| AtmIispConfigEntry | |||
| atmIispIfIndex | 1.3.6.1.4.1.1751.2.18.5.2.1.1 | ||
| interface index (slot/port/channel) SSPPCCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmIispSvcMinVpi | 1.3.6.1.4.1.1751.2.18.5.2.1.2 | ||
| The lower bound of the VPI for SVC connections. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmIispSvcMaxVpi | 1.3.6.1.4.1.1751.2.18.5.2.1.3 | ||
| The upper bound of the VPI for SVC connections. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmIispSvcMinVci | 1.3.6.1.4.1.1751.2.18.5.2.1.4 | ||
| The lower bound of the VCI for SVC connections. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmIispSvcMaxVci | 1.3.6.1.4.1.1751.2.18.5.2.1.5 | ||
| The upper bound of the VCI for SVC connections. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmIispAdminStatus | 1.3.6.1.4.1.1751.2.18.5.2.1.6 | ||
| The administrative action: 'outOfService' means take the UNI out of service 'inService' means take the UNI in service 'delete' remove/deconfigure the UNI. | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2), delete(3) | ||
| atmIispOperStatus | 1.3.6.1.4.1.1751.2.18.5.2.1.7 | ||
| The operational status of the UNI: 'outOfService' means the UNI is out of service 'inService' means the UNI is in service | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| atmIispOverSubscription | 1.3.6.1.4.1.1751.2.18.5.2.1.8 | ||
| Over subscription factor | |||
| OBJECT-TYPE | |||
| INTEGER | 1..100 | ||
| atmIispT303 | 1.3.6.1.4.1.1751.2.18.5.2.1.9 | ||
| Timer value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmIispT308 | 1.3.6.1.4.1.1751.2.18.5.2.1.10 | ||
| Timer value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmIispT309 | 1.3.6.1.4.1.1751.2.18.5.2.1.11 | ||
| Timer value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmIispT310 | 1.3.6.1.4.1.1751.2.18.5.2.1.12 | ||
| Timer value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmIispT316 | 1.3.6.1.4.1.1751.2.18.5.2.1.13 | ||
| Timer value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmIispT317 | 1.3.6.1.4.1.1751.2.18.5.2.1.14 | ||
| Timer value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmIispT322 | 1.3.6.1.4.1.1751.2.18.5.2.1.15 | ||
| Timer value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmIispT398 | 1.3.6.1.4.1.1751.2.18.5.2.1.16 | ||
| Timer value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmIispT399 | 1.3.6.1.4.1.1751.2.18.5.2.1.17 | ||
| Timer value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmIispAtmSignalingStatus | 1.3.6.1.4.1.1751.2.18.5.2.1.18 | ||
| Indicates if atm signaling is enabled or disabled for this interface. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmIispAvailBwIgr | 1.3.6.1.4.1.1751.2.18.5.2.1.19 | ||
| The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmIispAvailBwEgr | 1.3.6.1.4.1.1751.2.18.5.2.1.20 | ||
| The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmIispUPCSupp | 1.3.6.1.4.1.1751.2.18.5.2.1.21 | ||
| upc supp off/on | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| atmIispUbrLoadBalSupp | 1.3.6.1.4.1.1751.2.18.5.2.1.22 | ||
| load balancing supp for ubr conns off/on | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| atmIispSscopRxWndSz | 1.3.6.1.4.1.1751.2.18.5.2.1.23 | ||
| The receive window size for the SSCOP layer | |||
| OBJECT-TYPE | |||
| INTEGER | 8..256 | ||
| atmIispConnTrafficShapingFlag | 1.3.6.1.4.1.1751.2.18.5.2.1.24 | ||
| Traffic Shaping for Conn was enabled primarily because the core would lose cells since we were non-conformant cells. Therefore the hardware added traffic shaping per connection. But condition is VI should not be enabled if this feature is enabled. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| atmCirEmConfigTable | 1.3.6.1.4.1.1751.2.18.5.3 | ||
| Table for ATM Circuit Emulation Interface | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmCirEmConfigEntry | |||
| atmCirEmConfigEntry | 1.3.6.1.4.1.1751.2.18.5.3.1 | ||
| Row definition for ATM Circuit Emulation interface | |||
| OBJECT-TYPE | |||
| AtmCirEmConfigEntry | |||
| atmCirEmIfIndex | 1.3.6.1.4.1.1751.2.18.5.3.1.1 | ||
| interface index (slot/port/channel) SSPPCCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmCirEmAdminStatus | 1.3.6.1.4.1.1751.2.18.5.3.1.2 | ||
| The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface. | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2), delete(3) | ||
| atmCirEmOperStatus | 1.3.6.1.4.1.1751.2.18.5.3.1.3 | ||
| The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| atmCirEmCASIdleAbcdPattern | 1.3.6.1.4.1.1751.2.18.5.3.1.4 | ||
| abcd bit pattern for cirEm AIS | |||
| OBJECT-TYPE | |||
| INTEGER | 0..15 | ||
| atmCirEmCASBusyAbcdPattern | 1.3.6.1.4.1.1751.2.18.5.3.1.5 | ||
| abcd bit pattern for cirEm RDI | |||
| OBJECT-TYPE | |||
| INTEGER | 0..15 | ||
| atmCirEmAlarmDataPattern | 1.3.6.1.4.1.1751.2.18.5.3.1.6 | ||
| data pattern for cirEm AIS | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmCirEmTCPattern | 1.3.6.1.4.1.1751.2.18.5.3.1.7 | ||
| Should abcd bits be toggled after 2.5 Secs. | |||
| OBJECT-TYPE | |||
| INTEGER | casIdle(1), casBusy(2) | ||
| atmCirEmDownStInterworking | 1.3.6.1.4.1.1751.2.18.5.3.1.8 | ||
| This field will be used to select the type of interworking to be done in the down stream direction. | |||
| OBJECT-TYPE | |||
| INTEGER | unSupp(1), oAM(2), trunkCond(3) | ||
| atmTermEmConfigTable | 1.3.6.1.4.1.1751.2.18.5.4 | ||
| Table for ATM Terminal Emulation Interface | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmTermEmConfigEntry | |||
| atmTermEmConfigEntry | 1.3.6.1.4.1.1751.2.18.5.4.1 | ||
| Row definition for ATM Terminal Emulation interface | |||
| OBJECT-TYPE | |||
| AtmTermEmConfigEntry | |||
| atmTermEmIfIndex | 1.3.6.1.4.1.1751.2.18.5.4.1.1 | ||
| interface index (slot/port/channel) SSPPCCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmTermEmRxTimeOut | 1.3.6.1.4.1.1751.2.18.5.4.1.2 | ||
| receive timeout value in tenths of seconds. | |||
| OBJECT-TYPE | |||
| INTEGER | 7..10 | ||
| atmTermEmAdminStatus | 1.3.6.1.4.1.1751.2.18.5.4.1.3 | ||
| The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface. | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2), delete(3) | ||
| atmTermEmOperStatus | 1.3.6.1.4.1.1751.2.18.5.4.1.4 | ||
| The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| hdlcConfigTable | 1.3.6.1.4.1.1751.2.18.5.5 | ||
| Table for an HDLC Pass Through Interface | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| HdlcConfigEntry | |||
| hdlcConfigEntry | 1.3.6.1.4.1.1751.2.18.5.5.1 | ||
| Row definition for an HDLC Pass Through interface | |||
| OBJECT-TYPE | |||
| HdlcConfigEntry | |||
| hdlcIfIndex | 1.3.6.1.4.1.1751.2.18.5.5.1.1 | ||
| interface index (slot/port/channel) SSPPCCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| hdlcAdminStatus | 1.3.6.1.4.1.1751.2.18.5.5.1.2 | ||
| The administrative action: 'outOfService' means take the interface out of service 'inService' means take the interface in service 'delete' remove/deconfigure the interface. | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2), delete(3) | ||
| hdlcOperStatus | 1.3.6.1.4.1.1751.2.18.5.5.1.3 | ||
| The operational status of the interface: 'outOfService' means the interface is out of service 'inService' means the interface is in service | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| hdlcThroughPut | 1.3.6.1.4.1.1751.2.18.5.5.1.4 | ||
| The throughput bandwidth of the interface: 'k64' means a throughput of 64 kb 'k56' means a throughput of 56 kb | |||
| OBJECT-TYPE | |||
| INTEGER | k64(1), k56(2) | ||
| hdlcDataInversion | 1.3.6.1.4.1.1751.2.18.5.5.1.5 | ||
| Flag indicating whether data inversion is performed by the IO card for this interface. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| frUniConfigTable | 1.3.6.1.4.1.1751.2.18.5.6 | ||
| Table for Frame Realy UNI Interface | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| FrUniConfigEntry | |||
| frUniConfigEntry | 1.3.6.1.4.1.1751.2.18.5.6.1 | ||
| Row definition for Frame Relay interface | |||
| OBJECT-TYPE | |||
| FrUniConfigEntry | |||
| frUniIfIndex | 1.3.6.1.4.1.1751.2.18.5.6.1.1 | ||
| interface index (slot/port/channel) SSPPCCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| frUniAddrDlciLen | 1.3.6.1.4.1.1751.2.18.5.6.1.2 | ||
| Length of Data Link connection identify of frame relay UNI address | |||
| OBJECT-TYPE | |||
| INTEGER | twoOctets10Bits(1) | ||
| frUniDlcmiState | 1.3.6.1.4.1.1751.2.18.5.6.1.3 | ||
| The state of Data Link Connection Management Indentify of frame relay UNI. | |||
| OBJECT-TYPE | |||
| INTEGER | noLmi(1), lmiDte(2), lmiDce(3), lmiNni(4) | ||
| frUniAdminStatus | 1.3.6.1.4.1.1751.2.18.5.6.1.4 | ||
| The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface. | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2), delete(3) | ||
| frUniOperStatus | 1.3.6.1.4.1.1751.2.18.5.6.1.5 | ||
| The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| frUniOverSubscription | 1.3.6.1.4.1.1751.2.18.5.6.1.6 | ||
| Allow for the 'reserved' bandwidth allocated to oversubscribe the line by up to a factor of 10 . Generally, a figure of between 1 and 4 is normally a safe bet, although higher levels are often acceptable. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..10 | ||
| frUniLmiProtocol | 1.3.6.1.4.1.1751.2.18.5.6.1.7 | ||
| Lmi protocol to run | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), ccitt(2), ansi(3), att(4) | ||
| frUniInterworkingType | 1.3.6.1.4.1.1751.2.18.5.6.1.8 | ||
| frf5 - fr/atm network interworking frf8 - fr/atm service interworking | |||
| OBJECT-TYPE | |||
| INTEGER | frf5(1), frf8(2) | ||
| frUniN391 | 1.3.6.1.4.1.1751.2.18.5.6.1.9 | ||
| full status polling counter. DTE:Mandatory, DCE:N/A | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| frUniN392 | 1.3.6.1.4.1.1751.2.18.5.6.1.10 | ||
| error threshold. DTE:Mandatory, DCE:Mandatory | |||
| OBJECT-TYPE | |||
| INTEGER | 1..10 | ||
| frUniN393 | 1.3.6.1.4.1.1751.2.18.5.6.1.11 | ||
| Monitored event count. DTE:Mandatory, DCE:N/A | |||
| OBJECT-TYPE | |||
| INTEGER | 1..10 | ||
| frUniT391 | 1.3.6.1.4.1.1751.2.18.5.6.1.12 | ||
| Link integrity verification timer. DTE:Mandatory, DCE:N/A | |||
| OBJECT-TYPE | |||
| INTEGER | 5..30 | ||
| frUniT392 | 1.3.6.1.4.1.1751.2.18.5.6.1.13 | ||
| Polling verification timer. DTE:N/A, DCE:Mandatory | |||
| OBJECT-TYPE | |||
| INTEGER | 5..30 | ||
| frUniAsyncLmi | 1.3.6.1.4.1.1751.2.18.5.6.1.14 | ||
| Async PVC status messages | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| frLmiOperStatus | 1.3.6.1.4.1.1751.2.18.5.6.1.15 | ||
| The operational status of the lmi protocol: 'outOfService' interface is out of service 'inService' interface is in service | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| frUniNT3 | 1.3.6.1.4.1.1751.2.18.5.6.1.16 | ||
| Message frequency timer relevant for ATT LMI only. | |||
| OBJECT-TYPE | |||
| INTEGER | 5..30 | ||
| frUniThroughPut | 1.3.6.1.4.1.1751.2.18.5.6.1.17 | ||
| The throughput bandwidth of the interface: 'k64' means a throughput of 64 kb 'k56' means a throughput of 56 kb | |||
| OBJECT-TYPE | |||
| INTEGER | k64(1), k56(2) | ||
| dspConfigTable | 1.3.6.1.4.1.1751.2.18.5.7 | ||
| Table for Dsp Interface | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DspConfigEntry | |||
| dspConfigEntry | 1.3.6.1.4.1.1751.2.18.5.7.1 | ||
| Row definition for Dsp interface | |||
| OBJECT-TYPE | |||
| DspConfigEntry | |||
| dspIfIndex | 1.3.6.1.4.1.1751.2.18.5.7.1.1 | ||
| interface index (slot/port/channel) SSPPCCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| dspAdminStatus | 1.3.6.1.4.1.1751.2.18.5.7.1.2 | ||
| The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface. | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2), delete(3) | ||
| dspOperStatus | 1.3.6.1.4.1.1751.2.18.5.7.1.3 | ||
| The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| bridgeConfigTable | 1.3.6.1.4.1.1751.2.18.5.8 | ||
| Table which hold Config Entries for all bridges. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| BridgeConfigEntry | |||
| bridgeConfigEntry | 1.3.6.1.4.1.1751.2.18.5.8.1 | ||
| Row definition for bridge entries | |||
| OBJECT-TYPE | |||
| BridgeConfigEntry | |||
| bridgeIfIndex | 1.3.6.1.4.1.1751.2.18.5.8.1.1 | ||
| interface index (slot/port/channel) SSPPCCC | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAdminStatus | 1.3.6.1.4.1.1751.2.18.5.8.1.2 | ||
| The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface. | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2), delete(3) | ||
| bridgeOperStatus | 1.3.6.1.4.1.1751.2.18.5.8.1.3 | ||
| The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| bridgeNumber | 1.3.6.1.4.1.1751.2.18.5.8.1.4 | ||
| The number of bridges | |||
| OBJECT-TYPE | |||
| INTEGER | 0..999 | ||
| bridgePortPriority | 1.3.6.1.4.1.1751.2.18.5.8.1.5 | ||
| The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPort. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| bridgePathCost | 1.3.6.1.4.1.1751.2.18.5.8.1.6 | ||
| The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802-1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| bridgeConnectionType | 1.3.6.1.4.1.1751.2.18.5.8.1.7 | ||
| Connection types | |||
| OBJECT-TYPE | |||
| INTEGER | vc(1), llc(2) | ||
| bridgeDomainTable | 1.3.6.1.4.1.1751.2.18.5.9 | ||
| A table which holds the bridgeDomainEntry data | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| BridgeDomainEntry | |||
| bridgeDomainEntry | 1.3.6.1.4.1.1751.2.18.5.9.1 | ||
| A table entry for a Bridge Domain on an ethernet card | |||
| OBJECT-TYPE | |||
| BridgeDomainEntry | |||
| bridgeDomainNumber | 1.3.6.1.4.1.1751.2.18.5.9.1.1 | ||
| The bridge number of the bridge which this interface is a part of. If the interface is currently not associated with any bridge this will be set to none. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeDomainAdminStatus | 1.3.6.1.4.1.1751.2.18.5.9.1.2 | ||
| The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| bridgeDomainOperStatus | 1.3.6.1.4.1.1751.2.18.5.9.1.3 | ||
| The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| bridgeDomainPriority | 1.3.6.1.4.1.1751.2.18.5.9.1.4 | ||
| The value of the writeable portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| bridgeDomainTimeSinceTopologyChange | 1.3.6.1.4.1.1751.2.18.5.9.1.5 | ||
| The time (in hundredths of a second) since the last time a topology change was detedted by the bridge entity. | |||
| OBJECT-TYPE | |||
| TimeTicks | |||
| bridgeDomainDesignatedRoot | 1.3.6.1.4.1.1751.2.18.5.9.1.6 | ||
| The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(6) | ||
| bridgeDomainRootCost | 1.3.6.1.4.1.1751.2.18.5.9.1.7 | ||
| The cost of the path to the root as seen from this bridge. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeDomainRootPort | 1.3.6.1.4.1.1751.2.18.5.9.1.8 | ||
| The port number of the port which offers the lowest cost path from this bridge to the root bridge. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeDomainMaxMessageAge | 1.3.6.1.4.1.1751.2.18.5.9.1.9 | ||
| The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeDomainHelloTime | 1.3.6.1.4.1.1751.2.18.5.9.1.10 | ||
| The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeDomainHoldTime | 1.3.6.1.4.1.1751.2.18.5.9.1.11 | ||
| This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeDomainForwardDelay | 1.3.6.1.4.1.1751.2.18.5.9.1.12 | ||
| This time value, measured in units of hundredths of a second, controls how fast a port changes its state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to bridgeDomainBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.] | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeDomainMaxBridgeAge | 1.3.6.1.4.1.1751.2.18.5.9.1.13 | ||
| The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of bridgeDomainBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. | |||
| OBJECT-TYPE | |||
| INTEGER | 6..40 | ||
| bridgeDomainBridgeHelloTime | 1.3.6.1.4.1.1751.2.18.5.9.1.14 | ||
| The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..10 | ||
| bridgeDomainBridgeForwardDelay | 1.3.6.1.4.1.1751.2.18.5.9.1.15 | ||
| The value that all bridges user for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of bridgeDomainMaxBridgeAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. | |||
| OBJECT-TYPE | |||
| INTEGER | 4..30 | ||
| bridgeDomainAgingTime | 1.3.6.1.4.1.1751.2.18.5.9.1.16 | ||
| The timeout period in seconds for aging out dynamically learned forwarding information. 802.1D-1990 recommends a default of 300 seconds. | |||
| OBJECT-TYPE | |||
| INTEGER | 10..1000000 | ||
| bridgeDomainSpanningTree | 1.3.6.1.4.1.1751.2.18.5.9.1.17 | ||
| Allows the bridge to be configured to run without the spanning tree algorithm. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| bridgeDomainTopologyChanges | 1.3.6.1.4.1.1751.2.18.5.9.1.18 | ||
| The total number of topology changes detected by this bridge since the management entity was last reset or initialized. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeDomainLearnedEntryDiscards | 1.3.6.1.4.1.1751.2.18.5.9.1.19 | ||
| The total number of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the Forwarding Database. If this counter is increasing, it indicates that the Forwarding Database is regularly becoming full (a condition which has unpleasant performance effects on the subnetwork). If this counter has a significant value but is not presently increasing, it indicates that the problem has been occurring but is not persistent. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeDomainTimer | 1.3.6.1.4.1.1751.2.18.5.9.1.20 | ||
| Number of seconds elapsed since the last reset of bridge group statistics | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeDomainDefaultGateway | 1.3.6.1.4.1.1751.2.18.5.9.1.21 | ||
| The default gateway for this bridge domain. This is now an obsolete entry | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| bridgeDomainPortStatusBitmap | 1.3.6.1.4.1.1751.2.18.5.9.1.22 | ||
| A bit map describing which ports in a bridge group are up or down | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(30) | ||
| routerConfigTable | 1.3.6.1.4.1.1751.2.18.5.10 | ||
| Table which hold Config Entries for all routers (VPNs) | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| RouterConfigEntry | |||
| routerConfigEntry | 1.3.6.1.4.1.1751.2.18.5.10.1 | ||
| config data for a router (VPN) | |||
| OBJECT-TYPE | |||
| RouterConfigEntry | |||
| routerIfIndex | 1.3.6.1.4.1.1751.2.18.5.10.1.1 | ||
| A scalar number which identifies an IP interface within a given router (VPN) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| routerAdminStatus | 1.3.6.1.4.1.1751.2.18.5.10.1.2 | ||
| The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface. | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2), delete(3) | ||
| routerOperStatus | 1.3.6.1.4.1.1751.2.18.5.10.1.3 | ||
| The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| routerIpAddress | 1.3.6.1.4.1.1751.2.18.5.10.1.4 | ||
| router ATM IP Address. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| routerIpNetworkMask | 1.3.6.1.4.1.1751.2.18.5.10.1.5 | ||
| An IP network mask for an IP interface within a given router (VPN) | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| routerNumber | 1.3.6.1.4.1.1751.2.18.5.10.1.6 | ||
| A scalar number which identifies a given router (VPN) | |||
| OBJECT-TYPE | |||
| INTEGER | 0..999 | ||
| routerEthernetIpAddress | 1.3.6.1.4.1.1751.2.18.5.10.1.7 | ||
| router Ethernet IP Address. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| isdnConfig | 1.3.6.1.4.1.1751.2.18.5.11 | ||
| OBJECT IDENTIFIER | |||
| isdnIntfConfigTable | 1.3.6.1.4.1.1751.2.18.5.11.1 | ||
| Table of ISDN interface configuration attriburtes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| IsdnIntfConfigEntry | |||
| isdnIntfConfigEntry | 1.3.6.1.4.1.1751.2.18.5.11.1.1 | ||
| Row definition for ISDN interface configuration table | |||
| OBJECT-TYPE | |||
| IsdnIntfConfigEntry | |||
| isdnIntfId | 1.3.6.1.4.1.1751.2.18.5.11.1.1.1 | ||
| Interface ID (SSPPCCC) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| isdnIntfDChanId | 1.3.6.1.4.1.1751.2.18.5.11.1.1.2 | ||
| D-Channel Number - if the Dchannel no. is 0 no LAPD will run on this PRI-ISDN interface | |||
| OBJECT-TYPE | |||
| Integer32 | 0..24 | ||
| isdnIntfAdminStatus | 1.3.6.1.4.1.1751.2.18.5.11.1.1.3 | ||
| ISDN interface admin status | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2), delete(3) | ||
| isdnIntfOperStatus | 1.3.6.1.4.1.1751.2.18.5.11.1.1.4 | ||
| ISDN interface operational status | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| isdnIntfSwitchType | 1.3.6.1.4.1.1751.2.18.5.11.1.1.5 | ||
| ISDN interface Switch Type | |||
| OBJECT-TYPE | |||
| INTEGER | pri-ni2(1), pri-net5(2), pri-1tr6(3), pri-4ess(4), pri-5ess(5), pri-dass2(6), pri-dms100(7), pri-kdd(8), pri-ntt(9), pri-net5sw(10), pri-ts014(11), pri-vn(12) | ||
| isdnL2ConfigTable | 1.3.6.1.4.1.1751.2.18.5.11.2 | ||
| Table of Layer 2 (LAPD) attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| IsdnL2ConfigEntry | |||
| isdnL2ConfigEntry | 1.3.6.1.4.1.1751.2.18.5.11.2.1 | ||
| Row definition for ISDN LAPD parameters | |||
| OBJECT-TYPE | |||
| IsdnL2ConfigEntry | |||
| isdnL2IntfId | 1.3.6.1.4.1.1751.2.18.5.11.2.1.1 | ||
| Interface index (SSPPCCC) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| isdnT200 | 1.3.6.1.4.1.1751.2.18.5.11.2.1.2 | ||
| value of L2 T200 timer in 1/10 seconds | |||
| OBJECT-TYPE | |||
| INTEGER | 1..100 | ||
| isdnT203 | 1.3.6.1.4.1.1751.2.18.5.11.2.1.3 | ||
| value of L2 T203 timer in seconds | |||
| OBJECT-TYPE | |||
| INTEGER | 1..60 | ||
| isdnN200 | 1.3.6.1.4.1.1751.2.18.5.11.2.1.4 | ||
| Maximum number of retransmissions before the LAPD Link is declared as down | |||
| OBJECT-TYPE | |||
| INTEGER | 1..5 | ||
| isdnN201 | 1.3.6.1.4.1.1751.2.18.5.11.2.1.5 | ||
| Maximum number of octets in an information field - Maximum value of this parameter will be 300 bytes. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..300 | ||
| isdnK | 1.3.6.1.4.1.1751.2.18.5.11.2.1.6 | ||
| Maximum number of outstanding I frames - L2 - window size. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..127 | ||
| isdnL2OperStatus | 1.3.6.1.4.1.1751.2.18.5.11.2.1.7 | ||
| ISDN Layer 2 operational status - not-initiated means that first SETUP message has not been transmitted and L2 estalishment procedure has not been initiated yet | |||
| OBJECT-TYPE | |||
| INTEGER | not-initiated(1), up(2), down(3) | ||
| isdnL2CurrentState | 1.3.6.1.4.1.1751.2.18.5.11.2.1.8 | ||
| ISDN Layer 2 protocol's current state | |||
| OBJECT-TYPE | |||
| INTEGER | tei-unassigned(1), tei-assigned(4), awaiting-establishment(5), awaiting-release(6), multiple-frame-established(7), timer-recovery(8) | ||
| isdnBChanConfigTable | 1.3.6.1.4.1.1751.2.18.5.11.3 | ||
| Table of ISDN B Channel configuration attriburtes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| IsdnBChanConfigEntry | |||
| isdnBChanConfigEntry | 1.3.6.1.4.1.1751.2.18.5.11.3.1 | ||
| Row definition for ISDN B Channel configuration table | |||
| OBJECT-TYPE | |||
| IsdnBChanConfigEntry | |||
| isdnBChanId | 1.3.6.1.4.1.1751.2.18.5.11.3.1.1 | ||
| B Chan ID (SSPPCCC) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| isdnBChanAdminStatus | 1.3.6.1.4.1.1751.2.18.5.11.3.1.2 | ||
| ISDN B Chan admin status | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| isdnBChanOperStatus | 1.3.6.1.4.1.1751.2.18.5.11.3.1.3 | ||
| ISDN B Chan operational status | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| atmDbCirEmConfigTable | 1.3.6.1.4.1.1751.2.18.5.12 | ||
| Table for ATM DBCES Interface | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmDbCirEmConfigEntry | |||
| atmDbCirEmConfigEntry | 1.3.6.1.4.1.1751.2.18.5.12.1 | ||
| Row definition for ATM Dynamic Bandwidth Circuit Emulation interface. | |||
| OBJECT-TYPE | |||
| AtmDbCirEmConfigEntry | |||
| atmDbCirEmIfIndex | 1.3.6.1.4.1.1751.2.18.5.12.1.1 | ||
| Interface index (slot/port/channel) SSPPCCC. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmDbCirEmAdminStatus | 1.3.6.1.4.1.1751.2.18.5.12.1.2 | ||
| The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface. | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2), delete(3) | ||
| atmDbCirEmOperStatus | 1.3.6.1.4.1.1751.2.18.5.12.1.3 | ||
| The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| atmDbCirEmIdlePattern | 1.3.6.1.4.1.1751.2.18.5.12.1.7 | ||
| Idle pattern for idle data. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmDbCirEmServiceType | 1.3.6.1.4.1.1751.2.18.5.12.1.8 | ||
| Service type to be used. Affects the ABCD Signaling. | |||
| OBJECT-TYPE | |||
| INTEGER | plar(1), fxo-loopstart(2), fxs-loopstart(3), fxo-groundstart(4), fxs-groundstart(5) | ||
| atmDbCirEmDbcesType | 1.3.6.1.4.1.1751.2.18.5.12.1.9 | ||
| The type of dbces used. yurie: Yurie proprietary specific. | |||
| OBJECT-TYPE | |||
| INTEGER | lucent(1) | ||
| atmDbCirEmIntegrationTime | 1.3.6.1.4.1.1751.2.18.5.12.1.10 | ||
| This specifies the time to wait after receiving idle pattern to change state. The unit is in seconds. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| lmiDlciConfigTable | 1.3.6.1.4.1.1751.2.18.5.13 | ||
| Table for Lmi DLCI Interface. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| LmiDlciConfigEntry | |||
| lmiDlciConfigEntry | 1.3.6.1.4.1.1751.2.18.5.13.1 | ||
| Row definition for Lmi DLCI Interface. | |||
| OBJECT-TYPE | |||
| LmiDlciConfigEntry | |||
| lmiDlciIfIndex | 1.3.6.1.4.1.1751.2.18.5.13.1.1 | ||
| Interface index (slot/port/channel) SSPPCCC. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| lmiDlci | 1.3.6.1.4.1.1751.2.18.5.13.1.2 | ||
| dlci. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| lmiDlciOperStatus | 1.3.6.1.4.1.1751.2.18.5.13.1.3 | ||
| The operational status of the lmi protocol: 'outOfService' protocol is out of service 'inService' protocol is in service | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| lmiDlciStatusTime | 1.3.6.1.4.1.1751.2.18.5.13.1.4 | ||
| Time since last status transition occurred. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dsp2ConfigTable | 1.3.6.1.4.1.1751.2.18.5.14 | ||
| Table for Dsp2 Interface | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dsp2ConfigEntry | |||
| dsp2ConfigEntry | 1.3.6.1.4.1.1751.2.18.5.14.1 | ||
| Row definition for Dsp2 interface | |||
| OBJECT-TYPE | |||
| Dsp2ConfigEntry | |||
| dsp2IfIndex | 1.3.6.1.4.1.1751.2.18.5.14.1.1 | ||
| interface index (slot/port/channel) SSPPCCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| dsp2AdminStatus | 1.3.6.1.4.1.1751.2.18.5.14.1.2 | ||
| The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface. | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2), delete(3) | ||
| dsp2OperStatus | 1.3.6.1.4.1.1751.2.18.5.14.1.3 | ||
| The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| dsp2LoadCount | 1.3.6.1.4.1.1751.2.18.5.14.1.4 | ||
| Gives the number of calls going through that dsp. This will be of use in case of deletion of dsp interface. When no calls are going through the dsp this value will be 0 | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dsp2AalMode | 1.3.6.1.4.1.1751.2.18.5.14.1.5 | ||
| aal2-non-multiplexed : Does not support multiplexing of multiple channels with one trunk aal2-standard: Support Standard Aal2 Multiplexing aal1:Support Aal1 mode. | |||
| OBJECT-TYPE | |||
| INTEGER | aal2-non-multiplexed(1), aal2-standard(2), aal1(3) | ||
| atmImaConfigTable | 1.3.6.1.4.1.1751.2.18.5.15 | ||
| Inverse Multiplexing interface table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmImaConfigEntry | |||
| atmImaConfigEntry | 1.3.6.1.4.1.1751.2.18.5.15.1 | ||
| Row definition for Inverse Multiplexing attributes | |||
| OBJECT-TYPE | |||
| AtmImaConfigEntry | |||
| atmImaIntfIndex | 1.3.6.1.4.1.1751.2.18.5.15.1.1 | ||
| interface index (slot/port/channel) SSPPCCC | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmImaNeTxState | 1.3.6.1.4.1.1751.2.18.5.15.1.2 | ||
| The near-end transmit state. notInGroup -- Interface is not assigned to group unusableNoReason -- Doesn't work; Don't know why. unusableFailed -- Check the Defect value usable -- Interface is ready to go. active -- Interface is in use. | |||
| OBJECT-TYPE | |||
| INTEGER | notInGroup(1), unusableNoReason(2), unusableFault(3), unusableMisconnected(4), unusableInhibited(5), unusableFailed(6), usable(7), active(8) | ||
| atmImaNeRxState | 1.3.6.1.4.1.1751.2.18.5.15.1.3 | ||
| The near-end receive state. notInGroup -- Interface is not assigned to group unusableNoReason -- Doesn't work; Don't know why. unusableFailed -- Check the Defect value usable -- Interface is ready to go. active -- Interface is in use. | |||
| OBJECT-TYPE | |||
| INTEGER | notInGroup(1), unusableNoReason(2), unusableFault(3), unusableMisconnected(4), unusableInhibited(5), unusableFailed(6), usable(7), active(8) | ||
| atmImaFeTxState | 1.3.6.1.4.1.1751.2.18.5.15.1.4 | ||
| The far-end transmit state. notInGroup -- Interface is not assigned to group unusableNoReason -- Doesn't work; Don't know why. unusableFailed -- Check the Defect value usable -- Interface is ready to go. active -- Interface is in use. | |||
| OBJECT-TYPE | |||
| INTEGER | notInGroup(1), unusableNoReason(2), unusableFault(3), unusableMisconnected(4), unusableInhibited(5), unusableFailed(6), usable(7), active(8) | ||
| atmImaFeRxState | 1.3.6.1.4.1.1751.2.18.5.15.1.5 | ||
| The far-end receive state. notInGroup -- Interface is not assigned to group unusableNoReason -- Doesn't work; Don't know why. unusableFailed -- Check the Defect value usable -- Interface is ready to go. active -- Interface is in use. | |||
| OBJECT-TYPE | |||
| INTEGER | notInGroup(1), unusableNoReason(2), unusableFault(3), unusableMisconnected(4), unusableInhibited(5), unusableFailed(6), usable(7), active(8) | ||
| atmImaNeRxDefect | 1.3.6.1.4.1.1751.2.18.5.15.1.6 | ||
| The near-end receive defect. noDefect -- No link defect exists linkFailure -- Physical failure/ Loss of signal lifDefect -- Persistence of LIF defect at near-end (Loss of IMA Frame) lodsDefect -- Persistence of LODS defect at near-end (Link Out of Delay Synchronization) | |||
| OBJECT-TYPE | |||
| INTEGER | noDefect(1), linkFailure(2), lif(3), lods(4) | ||
| atmImaFeRxDefect | 1.3.6.1.4.1.1751.2.18.5.15.1.7 | ||
| The far-end receive defect. noDefect -- No link defect exists linkFailure -- Physical failure/ Loss of signal lifDefect -- Persistence of LIF defect at near-end (Loss of IMA Frame) lodsDefect -- Persistence of LODS defect at near-end (Link Out of Delay Synchronization) | |||
| OBJECT-TYPE | |||
| INTEGER | noDefect(1), linkFailure(2), lif(3), lods(4) | ||
| atmImaAdminStatus | 1.3.6.1.4.1.1751.2.18.5.15.1.8 | ||
| The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface. | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2), delete(3) | ||
| atmImaOperStatus | 1.3.6.1.4.1.1751.2.18.5.15.1.9 | ||
| The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| atmPnniConfigTable | 1.3.6.1.4.1.1751.2.18.5.16 | ||
| Table of atm PNNI Configuration | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmPnniConfigEntry | |||
| atmPnniConfigEntry | 1.3.6.1.4.1.1751.2.18.5.16.1 | ||
| Row definition of PNNI Configuration | |||
| OBJECT-TYPE | |||
| AtmPnniConfigEntry | |||
| atmPnniIfIndex | 1.3.6.1.4.1.1751.2.18.5.16.1.1 | ||
| interface index (slot/port/channel) SSPPCCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmPnniSvcMinVpi | 1.3.6.1.4.1.1751.2.18.5.16.1.2 | ||
| The lower bound of the VPI for SVC connections. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmPnniSvcMaxVpi | 1.3.6.1.4.1.1751.2.18.5.16.1.3 | ||
| The upper bound of the VPI for SVC connections. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmPnniSvcMinVci | 1.3.6.1.4.1.1751.2.18.5.16.1.4 | ||
| The lower bound of the VCI for SVC connections. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmPnniSvcMaxVci | 1.3.6.1.4.1.1751.2.18.5.16.1.5 | ||
| The upper bound of the VCI for SVC connections. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmPnniAdminStatus | 1.3.6.1.4.1.1751.2.18.5.16.1.6 | ||
| The administrative action: 'outOfService' means take the PNNI out of service 'inService' means take the PNNI in service 'delete' remove/deconfigure the PNNI. | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2), delete(3) | ||
| atmPnniOperStatus | 1.3.6.1.4.1.1751.2.18.5.16.1.7 | ||
| The operational status of the PNNI: 'outOfService' means the PNNI is out of service 'inService' means the PNNI is in service | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| atmPnniT303 | 1.3.6.1.4.1.1751.2.18.5.16.1.8 | ||
| Timer T303 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniT308 | 1.3.6.1.4.1.1751.2.18.5.16.1.9 | ||
| Timer T308 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniT309 | 1.3.6.1.4.1.1751.2.18.5.16.1.10 | ||
| Timer T309 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniT310 | 1.3.6.1.4.1.1751.2.18.5.16.1.11 | ||
| Timer T310 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniT313 | 1.3.6.1.4.1.1751.2.18.5.16.1.12 | ||
| Timer T313 value - User side only - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniT316 | 1.3.6.1.4.1.1751.2.18.5.16.1.13 | ||
| Timer T316 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniT317 | 1.3.6.1.4.1.1751.2.18.5.16.1.14 | ||
| Timer T317 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniT322 | 1.3.6.1.4.1.1751.2.18.5.16.1.15 | ||
| Timer T322 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniT397 | 1.3.6.1.4.1.1751.2.18.5.16.1.16 | ||
| Timer T397 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniT398 | 1.3.6.1.4.1.1751.2.18.5.16.1.17 | ||
| Timer T398 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniT399 | 1.3.6.1.4.1.1751.2.18.5.16.1.18 | ||
| Timer T399 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniCbrServCatSupp | 1.3.6.1.4.1.1751.2.18.5.16.1.19 | ||
| If CBR category is supported | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmPnniCbrGcacClpEqualZero | 1.3.6.1.4.1.1751.2.18.5.16.1.20 | ||
| If the advertised GCAC parameters apply for CLP=0 or CLP=0+1 traffic | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmPnniCbrMaxCellRate | 1.3.6.1.4.1.1751.2.18.5.16.1.21 | ||
| CBR category Maximum Cell Rate | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniCbrAvailCellRate | 1.3.6.1.4.1.1751.2.18.5.16.1.22 | ||
| CBR category Available Cell Rate | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniCbrCellXerDelay | 1.3.6.1.4.1.1751.2.18.5.16.1.23 | ||
| CBR category Cell Transfer Delay | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniCbrCellLossRatioZero | 1.3.6.1.4.1.1751.2.18.5.16.1.24 | ||
| CBR category Cell Loss Ratio for CLP=0 traffic | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniCbrCellLossRatioZeroPlusOne | 1.3.6.1.4.1.1751.2.18.5.16.1.25 | ||
| CBR category Cell Loss Ratio for CLP=0+1 traffic | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniCbrCellDelayVar | 1.3.6.1.4.1.1751.2.18.5.16.1.26 | ||
| CBR category Cell Delay Variation | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniRtVbrServCatSupp | 1.3.6.1.4.1.1751.2.18.5.16.1.27 | ||
| If RT VBR category is supported | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmPnniRtVbrGcacClpEqualZero | 1.3.6.1.4.1.1751.2.18.5.16.1.28 | ||
| If the advertised GCAC parameters apply for CLP=0 or CLP=0+1 traffic | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmPnniRtVbrMaxCellRate | 1.3.6.1.4.1.1751.2.18.5.16.1.29 | ||
| RT VBR category Maximum Cell Rate | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniRtVbrAvailCellRate | 1.3.6.1.4.1.1751.2.18.5.16.1.30 | ||
| RT VBR category Available Cell Rate | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniRtVbrCellXerDelay | 1.3.6.1.4.1.1751.2.18.5.16.1.31 | ||
| RT VBR category Cell Transfer Delay | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniRtVbrCellLossRatioZero | 1.3.6.1.4.1.1751.2.18.5.16.1.32 | ||
| RT VBR category Cell Loss Ratio for CLP=0 traffic | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniRtVbrCellLossRatioZeroPlusOne | 1.3.6.1.4.1.1751.2.18.5.16.1.33 | ||
| RT VBR category Cell Loss Ratio for CLP=0+1 traffic | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniRtVbrCellDelayVar | 1.3.6.1.4.1.1751.2.18.5.16.1.34 | ||
| RT VBR category Cell Delay Variation | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniRtVbrGcacPresent | 1.3.6.1.4.1.1751.2.18.5.16.1.35 | ||
| If RT VBR category GCAC Parameters present | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmPnniRtVbrCellRateMargin | 1.3.6.1.4.1.1751.2.18.5.16.1.36 | ||
| RT VBR category Cell Rate Margin | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmPnniRtVbrVarianceFactor | 1.3.6.1.4.1.1751.2.18.5.16.1.37 | ||
| RT VBR category Variance Factor | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmPnniNrtVbrServCatSupp | 1.3.6.1.4.1.1751.2.18.5.16.1.38 | ||
| If NRT VBR category is supported | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmPnniNrtVbrGcacClpEqualZero | 1.3.6.1.4.1.1751.2.18.5.16.1.39 | ||
| If the advertised GCAC parameters apply for CLP=0 or CLP=0+1 traffic | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmPnniNrtVbrMaxCellRate | 1.3.6.1.4.1.1751.2.18.5.16.1.40 | ||
| NRT VBR category Maximum Cell Rate | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniNrtVbrAvailCellRate | 1.3.6.1.4.1.1751.2.18.5.16.1.41 | ||
| NRT VBR category Available Cell Rate | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniNrtVbrCellXerDelay | 1.3.6.1.4.1.1751.2.18.5.16.1.42 | ||
| NRT VBR category Cell Transfer Delay | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniNrtVbrCellLossRatioZero | 1.3.6.1.4.1.1751.2.18.5.16.1.43 | ||
| NRT VBR category Cell Loss Ratio for CLP=0 traffic | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniNrtVbrCellLossRatioZeroPlusOne | 1.3.6.1.4.1.1751.2.18.5.16.1.44 | ||
| NRT VBR category Cell Loss Ratio for CLP=0+1 traffic | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniNrtVbrGcacPresent | 1.3.6.1.4.1.1751.2.18.5.16.1.45 | ||
| If NRT VBR category GCAC Parameters present | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmPnniNrtVbrCellRateMargin | 1.3.6.1.4.1.1751.2.18.5.16.1.46 | ||
| NRT VBR category Cell Rate Margin | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmPnniNrtVbrVarianceFactor | 1.3.6.1.4.1.1751.2.18.5.16.1.47 | ||
| NRT VBR category Variance Factor | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmPnniAbrServCatSupp | 1.3.6.1.4.1.1751.2.18.5.16.1.48 | ||
| If ABR category is supported | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmPnniAbrMaxCellRate | 1.3.6.1.4.1.1751.2.18.5.16.1.49 | ||
| ABR category Maximum Cell Rate | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniAbrAvailCellRate | 1.3.6.1.4.1.1751.2.18.5.16.1.50 | ||
| ABR category Available Cell Rate | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniUbrServCatSupp | 1.3.6.1.4.1.1751.2.18.5.16.1.51 | ||
| UBR category Cell Transfer Delay | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmPnniUbrMaxCellRate | 1.3.6.1.4.1.1751.2.18.5.16.1.52 | ||
| NRT VBR category Cell Loss Ratio for CLP=0 traffic | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniOverSubscription | 1.3.6.1.4.1.1751.2.18.5.16.1.53 | ||
| Over subscription factor for PNNI Intf. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..100 | ||
| atmPnniSgnlEnabled | 1.3.6.1.4.1.1751.2.18.5.16.1.54 | ||
| Indicates if atm signaling is enabled or disabled for this PNNI interface. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmPnniVpiSig | 1.3.6.1.4.1.1751.2.18.5.16.1.55 | ||
| VPI value for the signalling channel for the PNNI interface. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmPnniVciSig | 1.3.6.1.4.1.1751.2.18.5.16.1.56 | ||
| VCI value for the signalling channel for the PNNI interface. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..31 | ||
| atmPnniAvailBwIgr | 1.3.6.1.4.1.1751.2.18.5.16.1.57 | ||
| The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniAvailBwEgr | 1.3.6.1.4.1.1751.2.18.5.16.1.58 | ||
| The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniUPCSupp | 1.3.6.1.4.1.1751.2.18.5.16.1.59 | ||
| upc supp off/on | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| atmPnniUbrLoadBalSupp | 1.3.6.1.4.1.1751.2.18.5.16.1.60 | ||
| load balancing supp for ubr conns off/on | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| atmPnniSscopRxWndSz | 1.3.6.1.4.1.1751.2.18.5.16.1.61 | ||
| The receive window size for the SSCOP layer | |||
| OBJECT-TYPE | |||
| INTEGER | 8..256 | ||
| atmPnniRemoteSvcMinVpi | 1.3.6.1.4.1.1751.2.18.5.16.1.62 | ||
| The lower bound of the actual VPI for SVC connections. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmPnniRemoteSvcMaxVpi | 1.3.6.1.4.1.1751.2.18.5.16.1.63 | ||
| The Upper bound of the actual VPI for SVC connections. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmPnniRemoteSvcMinVci | 1.3.6.1.4.1.1751.2.18.5.16.1.64 | ||
| The lower bound of the actual VCI for SVC connections. | |||
| OBJECT-TYPE | |||
| INTEGER | 32..65535 | ||
| atmPnniRemoteSvcMaxVci | 1.3.6.1.4.1.1751.2.18.5.16.1.65 | ||
| The Upper bound of the actual VCI for SVC connections. | |||
| OBJECT-TYPE | |||
| INTEGER | 32..65535 | ||
| atmPnniVpiIlmi | 1.3.6.1.4.1.1751.2.18.5.16.1.66 | ||
| VPI value for the ilmi channel for the PNNI interface. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmPnniVciIlmi | 1.3.6.1.4.1.1751.2.18.5.16.1.67 | ||
| VCI value for the ilmi channel for the PNNI interface. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..31 | ||
| atmPnniIlmiProtocolStatus | 1.3.6.1.4.1.1751.2.18.5.16.1.68 | ||
| The administrative status: 'enabled' - ILMI protocol enabled on PNNI 'disabled' - ILMI protocol disabled on PNNI . | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmPnniIlmiOperStatus | 1.3.6.1.4.1.1751.2.18.5.16.1.69 | ||
| The operational status: 'outOfService' - ILMI connectivity is down 'inService' - ILMI connectivity is up. | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| atmPnniIlmiConfigProc | 1.3.6.1.4.1.1751.2.18.5.16.1.70 | ||
| ILMI Configuration Procedure status. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmPnniIlmiConnectProc | 1.3.6.1.4.1.1751.2.18.5.16.1.71 | ||
| ILMI Connectivity Procedure status. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmPnniIlmiAttachPtProc | 1.3.6.1.4.1.1751.2.18.5.16.1.72 | ||
| ILMI Attachment Point Procedure status. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmPnniIlmiSecureLinkProc | 1.3.6.1.4.1.1751.2.18.5.16.1.73 | ||
| ILMI Secure Link Procedure status. Can be enabled only if Attachment Point Procedure is enabled. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmPnniIlmiAddrRegProc | 1.3.6.1.4.1.1751.2.18.5.16.1.74 | ||
| ILMI Address Registration Procedure status. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| atmPnniIlmiTimerS | 1.3.6.1.4.1.1751.2.18.5.16.1.75 | ||
| Timer S (secs). Used to poll peer when link is down. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniIlmiTimerT | 1.3.6.1.4.1.1751.2.18.5.16.1.76 | ||
| Timer T (secs). Used to poll peer when link is up. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniIlmiRetryK | 1.3.6.1.4.1.1751.2.18.5.16.1.77 | ||
| Retry K - number of timeouts of before link is declared down. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPnniConnTrafficShapingFlag | 1.3.6.1.4.1.1751.2.18.5.16.1.78 | ||
| Traffic Shaping for Conn was enabled primarily because the core would lose cells since we were non-conformant cells. Therefore the hardware added traffic shaping per connection. But condition is VI should not be enabled if this feature is enabled. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| atmVnnConfigTable | 1.3.6.1.4.1.1751.2.18.5.17 | ||
| Table of atm user to network interface (UNI) | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmVnnConfigEntry | |||
| atmVnnConfigEntry | 1.3.6.1.4.1.1751.2.18.5.17.1 | ||
| Row definition of atm UNI | |||
| OBJECT-TYPE | |||
| AtmVnnConfigEntry | |||
| atmVnnIfIndex | 1.3.6.1.4.1.1751.2.18.5.17.1.1 | ||
| interface index (slot/port/channel) SSPPCCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmVnnAddrType | 1.3.6.1.4.1.1751.2.18.5.17.1.2 | ||
| atm address type | |||
| OBJECT-TYPE | |||
| INTEGER | nsap(1), e164(2), private(3) | ||
| atmVnnSvcMinVpi | 1.3.6.1.4.1.1751.2.18.5.17.1.3 | ||
| The lower bound of the VPI for SVC connections. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmVnnSvcMaxVpi | 1.3.6.1.4.1.1751.2.18.5.17.1.4 | ||
| The upper bound of the VPI for SVC connections. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmVnnSvcMinVci | 1.3.6.1.4.1.1751.2.18.5.17.1.5 | ||
| The lower bound of the VCI for SVC connections. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmVnnSvcMaxVci | 1.3.6.1.4.1.1751.2.18.5.17.1.6 | ||
| The upper bound of the VCI for SVC connections. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmVnnAdminStatus | 1.3.6.1.4.1.1751.2.18.5.17.1.7 | ||
| The administrative action: 'outOfService' means take the UNI out of service 'inService' means take the UNI in service 'delete' remove/deconfigure the UNI. | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2), delete(3) | ||
| atmVnnOperStatus | 1.3.6.1.4.1.1751.2.18.5.17.1.8 | ||
| The operational status of the UNI: 'outOfService' means the UNI is out of service 'inService' means the UNI is in service | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| atmVnnOverSubscription | 1.3.6.1.4.1.1751.2.18.5.17.1.9 | ||
| Over subscription factor | |||
| OBJECT-TYPE | |||
| INTEGER | 1..100 | ||
| atmVnnNwPrefix1 | 1.3.6.1.4.1.1751.2.18.5.17.1.10 | ||
| ATM Network Prefix 1 | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(13) | ||
| atmVnnT303 | 1.3.6.1.4.1.1751.2.18.5.17.1.11 | ||
| Timer T303 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmVnnT308 | 1.3.6.1.4.1.1751.2.18.5.17.1.12 | ||
| Timer T308 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmVnnT309 | 1.3.6.1.4.1.1751.2.18.5.17.1.13 | ||
| Timer T309 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmVnnT310 | 1.3.6.1.4.1.1751.2.18.5.17.1.14 | ||
| Timer T310 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmVnnT313 | 1.3.6.1.4.1.1751.2.18.5.17.1.15 | ||
| Timer T313 value - User side only - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmVnnT316 | 1.3.6.1.4.1.1751.2.18.5.17.1.16 | ||
| Timer T316 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmVnnT317 | 1.3.6.1.4.1.1751.2.18.5.17.1.17 | ||
| Timer T317 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmVnnT322 | 1.3.6.1.4.1.1751.2.18.5.17.1.18 | ||
| Timer T322 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmVnnT398 | 1.3.6.1.4.1.1751.2.18.5.17.1.19 | ||
| Timer T398 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmVnnT399 | 1.3.6.1.4.1.1751.2.18.5.17.1.20 | ||
| Timer T399 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmVnnMyNeighborIpAddress | 1.3.6.1.4.1.1751.2.18.5.17.1.21 | ||
| The IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can send SNMP messages, as IP datagrams sent to UDP port 161, in order to access network management information concerning the operation of that system. Note that the value of this object can currently only be obtained by manual configuration. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| atmVnnMyNeighborIfName | 1.3.6.1.4.1.1751.2.18.5.17.1.22 | ||
| The textual name of the interface on the neighbor system on the far end of this interface, and to which this interface connects. If the neighbor system is manageable through SNMP and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. If this interface does not have a textual name, the value of this object is a zero length string. Note that the value of this object can currently only be obtained by manual configuration. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(20) | ||
| atmVnnVpiSig | 1.3.6.1.4.1.1751.2.18.5.17.1.23 | ||
| VPI value for the signalling channel for the UNI interface. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmVnnVciSig | 1.3.6.1.4.1.1751.2.18.5.17.1.24 | ||
| VCI value for the signalling channel for the UNI interface. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..31 | ||
| atmVnnVpiIlmi | 1.3.6.1.4.1.1751.2.18.5.17.1.25 | ||
| VPI value for the ilmi channel for the UNI interface. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmVnnVciIlmi | 1.3.6.1.4.1.1751.2.18.5.17.1.26 | ||
| VCI value for the ilmi channel for the UNI interface. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..31 | ||
| atmVnnAtmSignalingStatus | 1.3.6.1.4.1.1751.2.18.5.17.1.27 | ||
| Indicates if atm signaling is enabled or disabled for this interface. Consistent with other AC interfaces | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1) | ||
| atmVnnMyIfName | 1.3.6.1.4.1.1751.2.18.5.17.1.28 | ||
| A textual name of this interface. If this system is manageable manageable through SNMP and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. This interface must be uniquely named on this system to distinguish parallel links with a neighboring system. If this interface does not have a textual name, the value of this object is a zero length string. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(20) | ||
| atmVnnIlmiProtocolStatus | 1.3.6.1.4.1.1751.2.18.5.17.1.29 | ||
| The administrative status: 'enabled' - ILMI protocol enabled on UNI. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1) | ||
| atmVnnIlmiOperStatus | 1.3.6.1.4.1.1751.2.18.5.17.1.30 | ||
| The operational status: 'outOfService' - ILMI connectivity is down 'inService' - ILMI connectivity is up. | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| atmVnnIlmiConfigProc | 1.3.6.1.4.1.1751.2.18.5.17.1.31 | ||
| ILMI Configuration Procedure status. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(2) | ||
| atmVnnIlmiConnectProc | 1.3.6.1.4.1.1751.2.18.5.17.1.32 | ||
| ILMI Connectivity Procedure status. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1) | ||
| atmVnnIlmiAttachPtProc | 1.3.6.1.4.1.1751.2.18.5.17.1.33 | ||
| ILMI Attachment Point Procedure status. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(2) | ||
| atmVnnIlmiSecureLinkProc | 1.3.6.1.4.1.1751.2.18.5.17.1.34 | ||
| ILMI Secure Link Procedure status. Can be enabled only if Attachment Point Procedure is enabled. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(2) | ||
| atmVnnIlmiAddrRegProc | 1.3.6.1.4.1.1751.2.18.5.17.1.35 | ||
| ILMI Address Registration Procedure status. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1) | ||
| atmVnnIlmiTimerS | 1.3.6.1.4.1.1751.2.18.5.17.1.36 | ||
| Timer S (secs). Used to poll peer when link is down. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmVnnIlmiTimerT | 1.3.6.1.4.1.1751.2.18.5.17.1.37 | ||
| Timer T (secs). Used to poll peer when link is up. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmVnnIlmiRetryK | 1.3.6.1.4.1.1751.2.18.5.17.1.38 | ||
| Retry K - number of timeouts before link is declared down. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmVnnAvailBwIgr | 1.3.6.1.4.1.1751.2.18.5.17.1.39 | ||
| The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmVnnAvailBwEgr | 1.3.6.1.4.1.1751.2.18.5.17.1.40 | ||
| The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmVnnUPCSupp | 1.3.6.1.4.1.1751.2.18.5.17.1.41 | ||
| upc supp off/on | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| atmVnnUbrLoadBalSupp | 1.3.6.1.4.1.1751.2.18.5.17.1.42 | ||
| load balancing supp for ubr conns off/on | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| atmVnnSscopRxWndSz | 1.3.6.1.4.1.1751.2.18.5.17.1.43 | ||
| The receive window size for the SSCOP layer | |||
| OBJECT-TYPE | |||
| INTEGER | 8..256 | ||
| virtualIntfConfigTable | 1.3.6.1.4.1.1751.2.18.5.18 | ||
| Table of Virtual Interfaces Configurations | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| VirtualIntfConfigEntry | |||
| virtualIntfConfigEntry | 1.3.6.1.4.1.1751.2.18.5.18.1 | ||
| Index is the Interface and the Virutal Interface | |||
| OBJECT-TYPE | |||
| VirtualIntfConfigEntry | |||
| virtualIntfConfigIf | 1.3.6.1.4.1.1751.2.18.5.18.1.1 | ||
| Interface index for side A of an ATM-to-ATM PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| virtualIntfConfigVi | 1.3.6.1.4.1.1751.2.18.5.18.1.2 | ||
| VI value. Def Val is 1 because 0 cannot be configured | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| virtualIntfConfigCellRate | 1.3.6.1.4.1.1751.2.18.5.18.1.3 | ||
| Bandwidth assigned for the VI. The unit is cells per sec. Total Bandwidth of all VI's cannot exceed bandwidth of the main interface. CAC will be supported per VI. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| virtualIntfConfigOverSubs | 1.3.6.1.4.1.1751.2.18.5.18.1.4 | ||
| Over Subscription rate for VI | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| virtualIntfConfigRowStatus | 1.3.6.1.4.1.1751.2.18.5.18.1.5 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| virtualIntfConfigUPCSupp | 1.3.6.1.4.1.1751.2.18.5.18.1.6 | ||
| virtual interface upc supp off/on If this is changed then all the connections on this interface will be replayed. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| virtualIntfAvailBwEgr | 1.3.6.1.4.1.1751.2.18.5.18.1.7 | ||
| Avail Bw for that VI in cells per sec in the Egress Direction or the direction away from back plane. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| virtualUNIConfigTable | 1.3.6.1.4.1.1751.2.18.5.19 | ||
| Table of Virtual UNI Interfaces Configurations | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| VirtualUNIConfigEntry | |||
| virtualUNIConfigEntry | 1.3.6.1.4.1.1751.2.18.5.19.1 | ||
| Index is the Interface and the Virutal UNI Interface | |||
| OBJECT-TYPE | |||
| VirtualUNIConfigEntry | |||
| virtualUNIIfIndex | 1.3.6.1.4.1.1751.2.18.5.19.1.1 | ||
| This is the first index to the Virtual UNI Interface table. Interface index will be of the form SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| virtualUNIVUNIId | 1.3.6.1.4.1.1751.2.18.5.19.1.2 | ||
| Virtual UNI number, second index to access the virtual UNI interface. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| virtualUNIVISupport | 1.3.6.1.4.1.1751.2.18.5.19.1.3 | ||
| Virtual Interface (Traffic Shaping) is enabled or disabled on this VUNI. A Virtual Interface should already be configured befaore the traffic shaping can be enabled on this VUNI. If VISupport is disabled then all the connections on the VUNI can only be configured as UBR connections if this VUNI interface is on a VI enabled physical interface | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| virtualUNIMinVpi | 1.3.6.1.4.1.1751.2.18.5.19.1.4 | ||
| Lower value of the VPI range for this VUNI | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| virtualUNIMaxVpi | 1.3.6.1.4.1.1751.2.18.5.19.1.5 | ||
| Upper value of the VPI range for this VUNI | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| virtualUNIConfigRowStatus | 1.3.6.1.4.1.1751.2.18.5.19.1.6 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| virtualUNIAddrType | 1.3.6.1.4.1.1751.2.18.5.19.1.7 | ||
| atm address type | |||
| OBJECT-TYPE | |||
| INTEGER | nsap(1), e164(2), private(3) | ||
| virtualUNISvcMinVpi | 1.3.6.1.4.1.1751.2.18.5.19.1.8 | ||
| The lower bound of the VPI for SVC connections. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| virtualUNISvcMaxVpi | 1.3.6.1.4.1.1751.2.18.5.19.1.9 | ||
| The upper bound of the VPI for SVC connections. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| virtualUNISvcMinVci | 1.3.6.1.4.1.1751.2.18.5.19.1.10 | ||
| The lower bound of the VCI for SVC connections. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| virtualUNISvcMaxVci | 1.3.6.1.4.1.1751.2.18.5.19.1.11 | ||
| The upper bound of the VCI for SVC connections. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| virtualUNIAdminStatus | 1.3.6.1.4.1.1751.2.18.5.19.1.12 | ||
| The administrative action: 'outOfService' means take the VUNI out of service 'inService' means take the VUNI in service | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| virtualUNIOperStatus | 1.3.6.1.4.1.1751.2.18.5.19.1.13 | ||
| The operational status of the VUNI: 'outOfService' means the VUNI is out of service 'inService' means the VUNI is in service | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| virtualUNINwPrefix1 | 1.3.6.1.4.1.1751.2.18.5.19.1.14 | ||
| ATM Network Prefix 1 | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(13) | ||
| virtualUNIT303 | 1.3.6.1.4.1.1751.2.18.5.19.1.15 | ||
| Timer T303 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| virtualUNIT308 | 1.3.6.1.4.1.1751.2.18.5.19.1.16 | ||
| Timer T308 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| virtualUNIT309 | 1.3.6.1.4.1.1751.2.18.5.19.1.17 | ||
| Timer T309 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| virtualUNIT310 | 1.3.6.1.4.1.1751.2.18.5.19.1.18 | ||
| Timer T310 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| virtualUNIT313 | 1.3.6.1.4.1.1751.2.18.5.19.1.19 | ||
| Timer T313 value - User side only - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| virtualUNIT316 | 1.3.6.1.4.1.1751.2.18.5.19.1.20 | ||
| Timer T316 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| virtualUNIT317 | 1.3.6.1.4.1.1751.2.18.5.19.1.21 | ||
| Timer T317 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| virtualUNIT322 | 1.3.6.1.4.1.1751.2.18.5.19.1.22 | ||
| Timer T322 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| virtualUNIT398 | 1.3.6.1.4.1.1751.2.18.5.19.1.23 | ||
| Timer T398 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| virtualUNIT399 | 1.3.6.1.4.1.1751.2.18.5.19.1.24 | ||
| Timer T399 value - seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| virtualUNIMyNeighborIpAddress | 1.3.6.1.4.1.1751.2.18.5.19.1.25 | ||
| The IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can send SNMP messages, as IP datagrams sent to UDP port 161, in order to access network management information concerning the operation of that system. Note that the value of this object can currently only be obtained by manual configuration. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| virtualUNIMyNeighborIfName | 1.3.6.1.4.1.1751.2.18.5.19.1.27 | ||
| The textual name of the interface on the neighbor system on the far end of this interface, and to which this interface connects. If the neighbor system is manageable through SNMP and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. If this interface does not have a textual name, the value of this object is a zero length string. Note that the value of this object can currently only be obtained by manual configuration. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(20) | ||
| virtualUNIVpiSig | 1.3.6.1.4.1.1751.2.18.5.19.1.28 | ||
| VPI value for the signalling channel for the UNI interface. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| virtualUNIVciSig | 1.3.6.1.4.1.1751.2.18.5.19.1.29 | ||
| VCI value for the signalling channel for the UNI interface. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..31 | ||
| virtualUNISignalingAdminStatus | 1.3.6.1.4.1.1751.2.18.5.19.1.30 | ||
| Indicates if atm signaling is enabled or disabled for this VUNI interface. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| virtualUNISignalingOperStatus | 1.3.6.1.4.1.1751.2.18.5.19.1.31 | ||
| The protocol operational status of the UNI: 'outOfService' means the UNI is out of service 'inService' means the UNI is in service | |||
| OBJECT-TYPE | |||
| INTEGER | inService(1), outOfService(2) | ||
| virtualUNIVpiIlmi | 1.3.6.1.4.1.1751.2.18.5.19.1.32 | ||
| VPI value for the ilmi channel for the UNI interface. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| virtualUNIVciIlmi | 1.3.6.1.4.1.1751.2.18.5.19.1.33 | ||
| VCI value for the ilmi channel for the UNI interface. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..31 | ||
| virtualUNIMyIfName | 1.3.6.1.4.1.1751.2.18.5.19.1.34 | ||
| A textual name of this interface. If this system is manageable manageable through SNMP and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. This interface must be uniquely named on this system to distinguish parallel links with a neighboring system. If this interface does not have a textual name, the value of this object is a zero length string. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(20) | ||
| virtualUNIIlmiProtocolStatus | 1.3.6.1.4.1.1751.2.18.5.19.1.35 | ||
| The administrative status: 'enabled' - ILMI protocol enabled on UNI 'disabled' - ILMI protocol disabled on UNI. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| virtualUNIIlmiOperStatus | 1.3.6.1.4.1.1751.2.18.5.19.1.36 | ||
| The operational status: 'outOfService' - ILMI connectivity is down 'inService' - ILMI connectivity is up. | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| virtualUNIIlmiConfigProc | 1.3.6.1.4.1.1751.2.18.5.19.1.37 | ||
| ILMI Configuration Procedure status. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| virtualUNIIlmiConnectProc | 1.3.6.1.4.1.1751.2.18.5.19.1.38 | ||
| ILMI Connectivity Procedure status. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| virtualUNIIlmiAttachPtProc | 1.3.6.1.4.1.1751.2.18.5.19.1.39 | ||
| ILMI Attachment Point Procedure status. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| virtualUNIIlmiSecureLinkProc | 1.3.6.1.4.1.1751.2.18.5.19.1.40 | ||
| ILMI Secure Link Procedure status. Can be enabled only if Attachment Point Procedure is enabled. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| virtualUNIIlmiAddrRegProc | 1.3.6.1.4.1.1751.2.18.5.19.1.41 | ||
| ILMI Address Registration Procedure status. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| virtualUNIIlmiTimerS | 1.3.6.1.4.1.1751.2.18.5.19.1.42 | ||
| Timer S (secs). Used to poll peer when link is down. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| virtualUNIIlmiTimerT | 1.3.6.1.4.1.1751.2.18.5.19.1.43 | ||
| Timer T (secs). Used to poll peer when link is up. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| virtualUNIIlmiRetryK | 1.3.6.1.4.1.1751.2.18.5.19.1.44 | ||
| Retry K - number of timeouts before link is declared down. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| virtualUNIIntfType | 1.3.6.1.4.1.1751.2.18.5.19.1.45 | ||
| atm interface type | |||
| OBJECT-TYPE | |||
| INTEGER | user(1), network(2) | ||
| virtualUNIUserAddress | 1.3.6.1.4.1.1751.2.18.5.19.1.46 | ||
| ATM User Address | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(7) | ||
| virtualUNIUserAddrOrgScope | 1.3.6.1.4.1.1751.2.18.5.19.1.47 | ||
| ATM User Address Organizational scope | |||
| OBJECT-TYPE | |||
| INTEGER | localNetwork(1), localNetworkPlusOne(2), localNetworkPlusTwo(3), siteMinusOne(4), intraSite(5), sitePlusOne(6), organizationMinusOne(7), intraOrganization(8), organizationPlusOne(9), communityMinusOne(10), intraCommunity(11), communityPlusOne(12), regional(13), interRegional(14), global(15) | ||
| virtualUNISscopRxWndSz | 1.3.6.1.4.1.1751.2.18.5.19.1.48 | ||
| The receive window size for the SSCOP layer | |||
| OBJECT-TYPE | |||
| INTEGER | 8..256 | ||
| casConfig | 1.3.6.1.4.1.1751.2.18.5.20 | ||
| OBJECT IDENTIFIER | |||
| casConfigTable | 1.3.6.1.4.1.1751.2.18.5.20.1 | ||
| Table for CAS trunk/line configuration. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| CasConfigEntry | |||
| casConfigEntry | 1.3.6.1.4.1.1751.2.18.5.20.1.1 | ||
| Row definition for CAS trunk/line configuration. | |||
| OBJECT-TYPE | |||
| CasConfigEntry | |||
| casIfIndex | 1.3.6.1.4.1.1751.2.18.5.20.1.1.1 | ||
| The channel ID (slot/port/channel) in SSPPCCC format associated with the CAS trunk/line. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| casAdminStatus | 1.3.6.1.4.1.1751.2.18.5.20.1.1.2 | ||
| The administrative action: outOfService-take the CAS trunk/line out of service, inService-take the CAS trunk/line in service, delete-remove/deconfigure the CAS trunk/line. | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2), delete(3) | ||
| casOperStatus | 1.3.6.1.4.1.1751.2.18.5.20.1.1.3 | ||
| The operational status of the CAS trunk/line: outOfService-the CAS trunk/line is out of service, inService-the CAS trunk/line is in service. | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| casProtocolType | 1.3.6.1.4.1.1751.2.18.5.20.1.1.4 | ||
| The type of CAS protocol to be used. The protocol must match the one used on the other end of the trunk/line. | |||
| OBJECT-TYPE | |||
| INTEGER | wink-start(1), loop-start-network(2), loop-start-user(3), ground-start-network(4), ground-start-user(5), itu-t-r2(6) | ||
| casDirection | 1.3.6.1.4.1.1751.2.18.5.20.1.1.5 | ||
| The direction of traffic flow on this CAS trunk/line. | |||
| OBJECT-TYPE | |||
| INTEGER | both(1), incoming(2), outgoing(3) | ||
| casAddressingType | 1.3.6.1.4.1.1751.2.18.5.20.1.1.6 | ||
| The addressing type used for the CAS trunk/line. dtmf -- dual tone multifrequency r1-mf -- R1 multifrequency, r2-mf -- R2 multifrequency. Type of 're-mf' is valid only when casProtocolType is 'wink start', while 'r2-mf' is valid only when casProtocolType is 'itu-t r2' . | |||
| OBJECT-TYPE | |||
| INTEGER | dtmf(1), r1-mf(2), r2-mf(3) | ||
| casBitPatternType | 1.3.6.1.4.1.1751.2.18.5.20.1.1.7 | ||
| The type of bit pattern used for supervisory signaling. The value is AB when SF framing is used, ABCD when ESF framing is used for DS1. In case of E1, the value is always ABCD. | |||
| OBJECT-TYPE | |||
| INTEGER | ab(1), abcd(2) | ||
| casGroupId | 1.3.6.1.4.1.1751.2.18.5.20.1.1.8 | ||
| The identifier to associate a group of CAS trunks/lines which have same reachability. When SG is disabled, it must be specified with a non-zero value. When SG is enabled, the value should be set to zero which indicate no routing performed based on the value. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| toneAnnceConfigTable | 1.3.6.1.4.1.1751.2.18.5.21 | ||
| Table for the Tone Announcement Interface | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ToneAnnceConfigEntry | |||
| toneAnnceConfigEntry | 1.3.6.1.4.1.1751.2.18.5.21.1 | ||
| Row definition for Tone Announcement interface | |||
| OBJECT-TYPE | |||
| ToneAnnceConfigEntry | |||
| toneAnnceIfIndex | 1.3.6.1.4.1.1751.2.18.5.21.1.1 | ||
| interface index (slot/port/channel) SSPPCCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| toneAnnceAdminStatus | 1.3.6.1.4.1.1751.2.18.5.21.1.2 | ||
| The administrative action: 'outOfService' means take the interface out of service 'inService' means take the interface in service 'delete' remove/deconfigure the interface. | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2), delete(3) | ||
| toneAnnceOperStatus | 1.3.6.1.4.1.1751.2.18.5.21.1.3 | ||
| The operational status of the interface: 'outOfService' means the interface is out of service 'inService' means the interface is in service | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| gr303IntfConfig | 1.3.6.1.4.1.1751.2.18.5.22 | ||
| OBJECT IDENTIFIER | |||
| gr303IntfConfigTable | 1.3.6.1.4.1.1751.2.18.5.22.1 | ||
| Table of GR303 interface configuration attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Gr303IntfConfigEntry | |||
| gr303IntfConfigEntry | 1.3.6.1.4.1.1751.2.18.5.22.1.1 | ||
| Row definition for GR303 interface configuration table | |||
| OBJECT-TYPE | |||
| Gr303IntfConfigEntry | |||
| gr303IntfId | 1.3.6.1.4.1.1751.2.18.5.22.1.1.1 | ||
| Interface ID (SSPPCCC) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| gr303TMCChannelId | 1.3.6.1.4.1.1751.2.18.5.22.1.1.2 | ||
| TMC-Channel Number. If TMC Channel is set to 0 there will be no TMC channel on the corresponding DS1. Generally the TMC channel should be specified on the one of the DS1's in a GR303 interface group and should be on DS0 no. 24 | |||
| OBJECT-TYPE | |||
| Integer32 | 0..24 | ||
| gr303EOCChannelId | 1.3.6.1.4.1.1751.2.18.5.22.1.1.3 | ||
| EOC-Channel Number. If EOC Channel is set to 0 there will be no EOC channel on the corresponding DS1. Generally the TMC channel should be specified on the one of the DS1's in a GR303 interface group and should be on DS0 no. 12 | |||
| OBJECT-TYPE | |||
| Integer32 | 0..24 | ||
| gr303IntfAdminStatus | 1.3.6.1.4.1.1751.2.18.5.22.1.1.4 | ||
| GR303 interface admin status | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2), delete(3) | ||
| gr303IntfOperStatus | 1.3.6.1.4.1.1751.2.18.5.22.1.1.5 | ||
| GR303 interface operational status | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| gr303Ds0ChanConfigTable | 1.3.6.1.4.1.1751.2.18.5.22.2 | ||
| Table of GR303 DS0 Channel configuration attriburtes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Gr303Ds0ChanConfigEntry | |||
| gr303Ds0ChanConfigEntry | 1.3.6.1.4.1.1751.2.18.5.22.2.1 | ||
| Row definition for GR303 DS0 Channel configuration table | |||
| OBJECT-TYPE | |||
| Gr303Ds0ChanConfigEntry | |||
| gr303Ds0ChanId | 1.3.6.1.4.1.1751.2.18.5.22.2.1.1 | ||
| GR303 DS0 Chan ID (SSPPCCC) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| gr303Ds0ChanAdminStatus | 1.3.6.1.4.1.1751.2.18.5.22.2.1.2 | ||
| GR303 Ds0 Chan admin status | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| gr303Ds0ChanOperStatus | 1.3.6.1.4.1.1751.2.18.5.22.2.1.3 | ||
| GR303 Ds0 Chan operational status | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| connectionConfig | 1.3.6.1.4.1.1751.2.18.6 | ||
| OBJECT IDENTIFIER | |||
| atmPvcVccTable | 1.3.6.1.4.1.1751.2.18.6.1 | ||
| Table of PVC atm virtual channel connections | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmPvcVccEntry | |||
| atmPvcVccEntry | 1.3.6.1.4.1.1751.2.18.6.1.1 | ||
| Row definition of atm PVC VCC connections | |||
| OBJECT-TYPE | |||
| AtmPvcVccEntry | |||
| atmPvcVccIfA | 1.3.6.1.4.1.1751.2.18.6.1.1.1 | ||
| Interface index for side A of an ATM-to-ATM PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmPvcVccVpiA | 1.3.6.1.4.1.1751.2.18.6.1.1.2 | ||
| VPI value for side A of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmPvcVccVciA | 1.3.6.1.4.1.1751.2.18.6.1.1.3 | ||
| VCI value for side A of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmPvcVccIfB | 1.3.6.1.4.1.1751.2.18.6.1.1.4 | ||
| Interface index for side B of an ATM-to-ATM PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmPvcVccVpiB | 1.3.6.1.4.1.1751.2.18.6.1.1.5 | ||
| VPI value for side B of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmPvcVccVciB | 1.3.6.1.4.1.1751.2.18.6.1.1.6 | ||
| VCI value for side B of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmPvcVccServiceTypeA2B | 1.3.6.1.4.1.1751.2.18.6.1.1.7 | ||
| service type | |||
| OBJECT-TYPE | |||
| INTEGER | ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), cbr4(7), cbr3(8), cbr2(9), cbr1(10), gfr2(11) | ||
| atmPvcVccSarTypeA2B | 1.3.6.1.4.1.1751.2.18.6.1.1.8 | ||
| SAR type used in atm adaption | |||
| OBJECT-TYPE | |||
| INTEGER | aal5(1), aal3-4(2), aal2(3), aal1(4), null(5) | ||
| atmPvcVccPeakCellRateA2B | 1.3.6.1.4.1.1751.2.18.6.1.1.10 | ||
| peak cell rate - side A, in cell per second | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccSusCellRateA2B | 1.3.6.1.4.1.1751.2.18.6.1.1.11 | ||
| sustained rate - side A, in cell per second | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccMaxBurstSizeA2B | 1.3.6.1.4.1.1751.2.18.6.1.1.12 | ||
| maximum burst size - side A, in cells | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccServiceTypeB2A | 1.3.6.1.4.1.1751.2.18.6.1.1.13 | ||
| service type | |||
| OBJECT-TYPE | |||
| INTEGER | ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), cbr4(7), cbr3(8), cbr2(9), cbr1(10), gfr2(11) | ||
| atmPvcVccSarTypeB2A | 1.3.6.1.4.1.1751.2.18.6.1.1.14 | ||
| sar type used in atm adaption | |||
| OBJECT-TYPE | |||
| INTEGER | aal5(1), aal3-4(2), aal2(3), aal1(4), null(5) | ||
| atmPvcVccPeakCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.1.1.16 | ||
| peak rate - side B, in cell per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccSusCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.1.1.17 | ||
| sustained rate - side B, in cell per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccMaxBurstSizeB2A | 1.3.6.1.4.1.1751.2.18.6.1.1.18 | ||
| maximum burst size - side B, in cells. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccType | 1.3.6.1.4.1.1751.2.18.6.1.1.20 | ||
| type of connection | |||
| OBJECT-TYPE | |||
| INTEGER | nonsecured(1), secured(2) | ||
| atmPvcVccFlow | 1.3.6.1.4.1.1751.2.18.6.1.1.21 | ||
| type of flow | |||
| OBJECT-TYPE | |||
| INTEGER | duplex(1), simplexA2B(2), pointToMultipointA2B(3) | ||
| atmPvcVccRowStatus | 1.3.6.1.4.1.1751.2.18.6.1.1.22 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| atmPvcVccFrwdErrCorrectionA2B | 1.3.6.1.4.1.1751.2.18.6.1.1.23 | ||
| Forward error correction scheme | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), eighthRate(2), quarterRate(3), halfRate(4), autoHiQ(5), auto(6), autoLoQ(7) | ||
| atmPvcVccFrwdErrCorrectionB2A | 1.3.6.1.4.1.1751.2.18.6.1.1.24 | ||
| Forward error correction scheme | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), eighthRate(2), quarterRate(3), halfRate(4), autoHiQ(5), auto(6), autoLoQ(7) | ||
| atmPvcVccConnectionStatus | 1.3.6.1.4.1.1751.2.18.6.1.1.25 | ||
| Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. | |||
| OBJECT-TYPE | |||
| INTEGER | active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) | ||
| atmPvcVccOamStatus | 1.3.6.1.4.1.1751.2.18.6.1.1.26 | ||
| Indicates the OAM monitoring status of side A. The 5 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will respond to AIS/RDI. Seg-Pt: A side is only a segment point, therefore it will only respond to maintenance OAM cells and not fault cells. End-Seg-Pt: A side is both an end point and a segment point. Intermediate-Pt: It will only generate AIS during local failure. For ATM-to-ATM connections the OAM status will be symmetric on both sides of the connection. | |||
| OBJECT-TYPE | |||
| INTEGER | unsupp(1), end-Pt(2), seg-Pt(3), end-Seg-Pt(4), intermediate-Pt(5), intra-Segment-Pt(6) | ||
| atmPvcVccDualHomed | 1.3.6.1.4.1.1751.2.18.6.1.1.27 | ||
| Does this PVC need a backup Dual homing PVC. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| atmPvcVccViA | 1.3.6.1.4.1.1751.2.18.6.1.1.28 | ||
| VI to associate the Egress part of the B2A connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| atmPvcVccViB | 1.3.6.1.4.1.1751.2.18.6.1.1.29 | ||
| VI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| atmPvcVccCnfrmTypeA2B | 1.3.6.1.4.1.1751.2.18.6.1.1.30 | ||
| The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one_bucket_notag_0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two_bucket_notag_0plus1_0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two_bucket_notag_0plus1_0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two_bucket_tag_0plus1_0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best_effort_tag. Tag all cells and then do a best effort. | |||
| OBJECT-TYPE | |||
| INTEGER | best-effort(1), one-bucket-notag-0plus1(2), two-bucket-notag-0plus1-0plus1(3), two-bucket-notag-0plus1-0(4), two-bucket-tag-0plus1-0(5), best-effort-tag(6) | ||
| atmPvcVccCnfrmTypeB2A | 1.3.6.1.4.1.1751.2.18.6.1.1.31 | ||
| The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one_bucket_notag_0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two_bucket_notag_0plus1_0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two_bucket_notag_0plus1_0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two_bucket_tag_0plus1_0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best_effort_tag. Tag all cells and then do a best effort. | |||
| OBJECT-TYPE | |||
| INTEGER | best-effort(1), one-bucket-notag-0plus1(2), two-bucket-notag-0plus1-0plus1(3), two-bucket-notag-0plus1-0(4), two-bucket-tag-0plus1-0(5), best-effort-tag(6) | ||
| atmPvcVccVUNIA | 1.3.6.1.4.1.1751.2.18.6.1.1.32 | ||
| VUNI to associate the Egress part of the B2A connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmPvcVccVUNIB | 1.3.6.1.4.1.1751.2.18.6.1.1.33 | ||
| VUNI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmPvcVccOamStatusB | 1.3.6.1.4.1.1751.2.18.6.1.1.34 | ||
| Indicates the Oam monitoring status of side B of an internal connection. Refer to ITU I.610 and Bellcore GR1248-CORE for definitions. The 6 possible states are: Unsupp: No OAM cell monitoring or generation enabled. All OAM flows are transparently passed through. End-Pt: Connection endPoint, segment flows are discarded. Seg-Pt: Segment endPoint. End-Seg-Pt: Connection endPoint that is also a segment endPoint. Intermediate-Pt: Connecting point, that is outside any segment. Generates only ete flows. Intra-Segment-Pt: Connecting point with a segment. Generates ete as well as segment flows. | |||
| OBJECT-TYPE | |||
| INTEGER | unsupp(1), end-Pt(2), seg-Pt(3), end-Seg-Pt(4), intermediate-Pt(5), intra-Segment-Pt(6) | ||
| atmPvcVccOAMConnEndPtStatusA | 1.3.6.1.4.1.1751.2.18.6.1.1.35 | ||
| Connection endpoint side A status. Valid only at connection endpoint. | |||
| OBJECT-TYPE | |||
| INTEGER | ete-active(1), ete-ais-state(2), ete-rdi-state(3), ete-ais-rdi-state(4) | ||
| atmPvcVccOAMConnEndPtStatusB | 1.3.6.1.4.1.1751.2.18.6.1.1.36 | ||
| Connection endpoint side B status. Valid only at connection endpoint. | |||
| OBJECT-TYPE | |||
| INTEGER | ete-active(1), ete-ais-state(2), ete-rdi-state(3), ete-ais-rdi-state(4) | ||
| atmPvcVccOAMConnSegEndPtStatusA | 1.3.6.1.4.1.1751.2.18.6.1.1.37 | ||
| Segment endpoint side A status. Valid only at segment endpoints. | |||
| OBJECT-TYPE | |||
| INTEGER | seg-active(1), seg-ais-state(2), seg-rdi-state(3), seg-ais-rdi-state(4) | ||
| atmPvcVccOAMConnSegEndPtStatusB | 1.3.6.1.4.1.1751.2.18.6.1.1.38 | ||
| Segment endpoint side B status. Valid only at segment endpoints. | |||
| OBJECT-TYPE | |||
| INTEGER | seg-active(1), seg-ais-state(2), seg-rdi-state(3), seg-ais-rdi-state(4) | ||
| atmPvcVccMfsA2B | 1.3.6.1.4.1.1751.2.18.6.1.1.39 | ||
| Maximum Frame Size for GFR traffic for A2B dir | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| atmPvcVccMfsB2A | 1.3.6.1.4.1.1751.2.18.6.1.1.40 | ||
| Maximum Frame Size for GFR traffic for B2A dir | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| atmPvcVccConnFailureCauseA | 1.3.6.1.4.1.1751.2.18.6.1.1.41 | ||
| connestion status reason code | |||
| OBJECT-TYPE | |||
| AtmConnFailureCause | |||
| atmPvcVccConnFailureCauseB | 1.3.6.1.4.1.1751.2.18.6.1.1.42 | ||
| connection status reason code | |||
| OBJECT-TYPE | |||
| AtmConnFailureCause | |||
| atmPvcVccTrafficShapingA2B | 1.3.6.1.4.1.1751.2.18.6.1.1.43 | ||
| Traffic Shaping Support in the A2B direction. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| atmPvcVccTrafficShapingB2A | 1.3.6.1.4.1.1751.2.18.6.1.1.44 | ||
| Traffic Shaping Support in the B2A direction. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| atmPvcVpcTable | 1.3.6.1.4.1.1751.2.18.6.2 | ||
| Table of PVC atm virtual path connections | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmPvcVpcEntry | |||
| atmPvcVpcEntry | 1.3.6.1.4.1.1751.2.18.6.2.1 | ||
| Row definition of atm connections | |||
| OBJECT-TYPE | |||
| AtmPvcVpcEntry | |||
| atmPvcVpcIfA | 1.3.6.1.4.1.1751.2.18.6.2.1.1 | ||
| Interface index for side A of an ATM-to-ATM PVC VPC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmPvcVpcVpiA | 1.3.6.1.4.1.1751.2.18.6.2.1.2 | ||
| VPI value for side A of an ATM-to-ATM PVC VPC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmPvcVpcIfB | 1.3.6.1.4.1.1751.2.18.6.2.1.3 | ||
| Interface index for side B of an ATM-to-ATM PVC VPC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmPvcVpcVpiB | 1.3.6.1.4.1.1751.2.18.6.2.1.4 | ||
| VPI value for side B of an ATM-to-ATM PVC VPC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmPvcVpcServiceTypeA2B | 1.3.6.1.4.1.1751.2.18.6.2.1.5 | ||
| service type | |||
| OBJECT-TYPE | |||
| INTEGER | ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), cbr4(7), cbr3(8), cbr2(9), cbr1(10) | ||
| atmPvcVpcSarTypeA2B | 1.3.6.1.4.1.1751.2.18.6.2.1.6 | ||
| SAR Type | |||
| OBJECT-TYPE | |||
| INTEGER | aal5(1), aal3-4(2), aal2(3), aal1(4), null(5) | ||
| atmPvcVpcPeakCellRateA2B | 1.3.6.1.4.1.1751.2.18.6.2.1.8 | ||
| peak rate - side A, in cell per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcSusCellRateA2B | 1.3.6.1.4.1.1751.2.18.6.2.1.9 | ||
| sustained rate - side A, in cell per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcMaxBurstSizeA2B | 1.3.6.1.4.1.1751.2.18.6.2.1.10 | ||
| maximum burst size - side A, in cell per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcServiceTypeB2A | 1.3.6.1.4.1.1751.2.18.6.2.1.11 | ||
| service type | |||
| OBJECT-TYPE | |||
| INTEGER | ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), cbr4(7), cbr3(8), cbr2(9), cbr1(10) | ||
| atmPvcVpcSarTypeB2A | 1.3.6.1.4.1.1751.2.18.6.2.1.12 | ||
| SAR Type | |||
| OBJECT-TYPE | |||
| INTEGER | aal5(1), aal3-4(2), aal2(3), aal1(4), null(5) | ||
| atmPvcVpcPeakCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.2.1.14 | ||
| peak rate - side B, in cell per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcSusCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.2.1.15 | ||
| sustained rate - side B, in cell per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcMaxBurstSizeB2A | 1.3.6.1.4.1.1751.2.18.6.2.1.16 | ||
| maximum burst size - side B, in cell per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcType | 1.3.6.1.4.1.1751.2.18.6.2.1.17 | ||
| security feature type | |||
| OBJECT-TYPE | |||
| INTEGER | nonsecured(1), secured(2) | ||
| atmPvcVpcFlow | 1.3.6.1.4.1.1751.2.18.6.2.1.18 | ||
| flow type | |||
| OBJECT-TYPE | |||
| INTEGER | duplex(1), simplexA2B(2), pointToMultipointA2B(3) | ||
| atmPvcVpcRowStatus | 1.3.6.1.4.1.1751.2.18.6.2.1.19 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| atmPvcVpcConnectionStatus | 1.3.6.1.4.1.1751.2.18.6.2.1.20 | ||
| Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. | |||
| OBJECT-TYPE | |||
| INTEGER | active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) | ||
| atmPvcVpcOamStatus | 1.3.6.1.4.1.1751.2.18.6.2.1.21 | ||
| Indicates the OAM monitoring status of side A. The 5 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will respond to AIS/RDI. Seg-Pt: A side is only a segment point, therefore it will only respond to maintenance OAM cells and not fault cells. End-Seg-Pt: A side is both an end point and a segment point. Intermediate-Pt: It will only generate AIS during local failure. For ATM-to-ATM connections the OAM status will be symmetric on both sides of the connection. | |||
| OBJECT-TYPE | |||
| INTEGER | unsupp(1), end-Pt(2), seg-Pt(3), end-Seg-Pt(4), intermediate-Pt(5), intra-Segment-Pt(6) | ||
| atmPvcVpcDualHomed | 1.3.6.1.4.1.1751.2.18.6.2.1.22 | ||
| Does this PVC need a backup Dual homing PVC. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| atmPvcVpcViA | 1.3.6.1.4.1.1751.2.18.6.2.1.23 | ||
| VI to associate the Egress part of the B2A connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| atmPvcVpcViB | 1.3.6.1.4.1.1751.2.18.6.2.1.24 | ||
| VI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| atmPvcVpcCnfrmTypeA2B | 1.3.6.1.4.1.1751.2.18.6.2.1.25 | ||
| The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. | |||
| OBJECT-TYPE | |||
| INTEGER | best-effort(1), one-bucket-notag-0plus1(2), two-bucket-notag-0plus1-0plus1(3), two-bucket-notag-0plus1-0(4), two-bucket-tag-0plus1-0(5), best-effort-tag(6) | ||
| atmPvcVpcCnfrmTypeB2A | 1.3.6.1.4.1.1751.2.18.6.2.1.26 | ||
| The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. | |||
| OBJECT-TYPE | |||
| INTEGER | best-effort(1), one-bucket-notag-0plus1(2), two-bucket-notag-0plus1-0plus1(3), two-bucket-notag-0plus1-0(4), two-bucket-tag-0plus1-0(5), best-effort-tag(6) | ||
| atmPvcVpcVUNIA | 1.3.6.1.4.1.1751.2.18.6.2.1.27 | ||
| VUNI Id to associate the Egress part of the B2A connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmPvcVpcVUNIB | 1.3.6.1.4.1.1751.2.18.6.2.1.28 | ||
| VUNI Id to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmPvcVpcOamStatusB | 1.3.6.1.4.1.1751.2.18.6.2.1.29 | ||
| Indicates the Oam monitoring status of side B of an internal connection. Refer to ITU I.610 and Bellcore GR1248-CORE for definitions. The 6 possible states are: Unsupp: No OAM cell monitoring or generation enabled. All OAM flows are transparently passed through. End-Pt: Connection endPoint, segment flows are discarded. Seg-Pt: Segment endPoint. End-Seg-Pt: Connection endPoint that is also a segment endPoint. Intermediate-Pt: Connecting point, that is outside any segment. Generates only ete flows. Intra-Segment-Pt: Connecting point with a segment. Generates ete as well as segment flows. | |||
| OBJECT-TYPE | |||
| INTEGER | unsupp(1), end-Pt(2), seg-Pt(3), end-Seg-Pt(4), intermediate-Pt(5), intra-Segment-Pt(6) | ||
| atmPvcVpcOAMConnEndPtStatusA | 1.3.6.1.4.1.1751.2.18.6.2.1.30 | ||
| Connection endpoint side A status. Valid only at connection endpoint. | |||
| OBJECT-TYPE | |||
| INTEGER | ete-active(1), ete-ais-state(2), ete-rdi-state(3), ete-ais-rdi-state(4) | ||
| atmPvcVpcOAMConnEndPtStatusB | 1.3.6.1.4.1.1751.2.18.6.2.1.31 | ||
| Connection endpoint side B status. Valid only at connection endpoint. | |||
| OBJECT-TYPE | |||
| INTEGER | ete-active(1), ete-ais-state(2), ete-rdi-state(3), ete-ais-rdi-state(4) | ||
| atmPvcVpcOAMConnSegEndPtStatusA | 1.3.6.1.4.1.1751.2.18.6.2.1.32 | ||
| Segment endpoint side A status. Valid only at segment/connection endpoints. | |||
| OBJECT-TYPE | |||
| INTEGER | seg-active(1), seg-ais-state(2), seg-rdi-state(3), seg-ais-rdi-state(4) | ||
| atmPvcVpcOAMConnSegEndPtStatusB | 1.3.6.1.4.1.1751.2.18.6.2.1.33 | ||
| Segment endpoint side B status. Valid only at segment/connection endpoints. | |||
| OBJECT-TYPE | |||
| INTEGER | seg-active(1), seg-ais-state(2), seg-rdi-state(3), seg-ais-rdi-state(4) | ||
| atmPvcVpcConnFailureCauseA | 1.3.6.1.4.1.1751.2.18.6.2.1.34 | ||
| connestion status reason code | |||
| OBJECT-TYPE | |||
| AtmConnFailureCause | |||
| atmPvcVpcConnFailureCauseB | 1.3.6.1.4.1.1751.2.18.6.2.1.35 | ||
| connection status reason code | |||
| OBJECT-TYPE | |||
| AtmConnFailureCause | |||
| atmPvcVpcTrafficShapingA2B | 1.3.6.1.4.1.1751.2.18.6.2.1.36 | ||
| Traffic Shaping Support in the A2B direction. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| atmPvcVpcTrafficShapingB2A | 1.3.6.1.4.1.1751.2.18.6.2.1.37 | ||
| Traffic Shaping Support in the B2A direction. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| atmSvcVccTable | 1.3.6.1.4.1.1751.2.18.6.3 | ||
| Table of atm connections | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmSvcVccEntry | |||
| atmSvcVccEntry | 1.3.6.1.4.1.1751.2.18.6.3.1 | ||
| Row definition of atm connections | |||
| OBJECT-TYPE | |||
| AtmSvcVccEntry | |||
| atmSvcVccIfA | 1.3.6.1.4.1.1751.2.18.6.3.1.1 | ||
| interface index (slot/port/channel) SSPPCCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmSvcVccVpiA | 1.3.6.1.4.1.1751.2.18.6.3.1.2 | ||
| atm path identifier - side A | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmSvcVccVciA | 1.3.6.1.4.1.1751.2.18.6.3.1.3 | ||
| atm channel identifier - side A | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmSvcVccIfB | 1.3.6.1.4.1.1751.2.18.6.3.1.4 | ||
| interface index (slot/port/channel) SSPPCCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmSvcVccVpiB | 1.3.6.1.4.1.1751.2.18.6.3.1.5 | ||
| atm path identifier - side B | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmSvcVccVciB | 1.3.6.1.4.1.1751.2.18.6.3.1.6 | ||
| atm channel identifier - side B | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmSvcVccServiceTypeA2B | 1.3.6.1.4.1.1751.2.18.6.3.1.7 | ||
| service type | |||
| OBJECT-TYPE | |||
| INTEGER | ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), cbr4(7), cbr3(8), cbr2(9), cbr1(10) | ||
| atmSvcVccSarTypeA2B | 1.3.6.1.4.1.1751.2.18.6.3.1.8 | ||
| sar type - A to B direction | |||
| OBJECT-TYPE | |||
| INTEGER | aal5(1), aal3-4(2), aal2(3), aal1(4), null(5) | ||
| atmSvcVccPeakCellRateA2B | 1.3.6.1.4.1.1751.2.18.6.3.1.10 | ||
| peak rate - side A | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccSusCellRateA2B | 1.3.6.1.4.1.1751.2.18.6.3.1.11 | ||
| sustained rate - side A | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccMaxBurstSizeA2B | 1.3.6.1.4.1.1751.2.18.6.3.1.12 | ||
| maximum burst size - side A | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccServiceTypeB2A | 1.3.6.1.4.1.1751.2.18.6.3.1.13 | ||
| service type | |||
| OBJECT-TYPE | |||
| INTEGER | ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), cbr4(7), cbr3(8), cbr2(9), cbr1(10) | ||
| atmSvcVccSarTypeB2A | 1.3.6.1.4.1.1751.2.18.6.3.1.14 | ||
| sar type - B to A direction | |||
| OBJECT-TYPE | |||
| INTEGER | aal5(1), aal3-4(2), aal2(3), aal1(4), null(5) | ||
| atmSvcVccPeakCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.3.1.16 | ||
| peak rate - side B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccSusCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.3.1.17 | ||
| sustained rate - side B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccMaxBurstSizeB2A | 1.3.6.1.4.1.1751.2.18.6.3.1.18 | ||
| maximum burst size - side B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccFlow | 1.3.6.1.4.1.1751.2.18.6.3.1.19 | ||
| flow type | |||
| OBJECT-TYPE | |||
| INTEGER | duplex(1), pointToMultipoint(2) | ||
| atmSvcVccType | 1.3.6.1.4.1.1751.2.18.6.3.1.20 | ||
| type of connection | |||
| OBJECT-TYPE | |||
| INTEGER | nonsecured(1), secured(2) | ||
| atmSvcVccConnectionStatus | 1.3.6.1.4.1.1751.2.18.6.3.1.21 | ||
| Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. | |||
| OBJECT-TYPE | |||
| INTEGER | active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) | ||
| atmSvcVccViA | 1.3.6.1.4.1.1751.2.18.6.3.1.22 | ||
| VI to associate the Egress part of the B2A connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| atmSvcVccViB | 1.3.6.1.4.1.1751.2.18.6.3.1.23 | ||
| VI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| atmSvcVccCnfrmTypeA2B | 1.3.6.1.4.1.1751.2.18.6.3.1.24 | ||
| The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. | |||
| OBJECT-TYPE | |||
| INTEGER | best-effort(1), one-bucket-notag-0plus1(2), two-bucket-notag-0plus1-0plus1(3), two-bucket-notag-0plus1-0(4), two-bucket-tag-0plus1-0(5), best-effort-tag(6) | ||
| atmSvcVccCnfrmTypeB2A | 1.3.6.1.4.1.1751.2.18.6.3.1.25 | ||
| The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. | |||
| OBJECT-TYPE | |||
| INTEGER | best-effort(1), one-bucket-notag-0plus1(2), two-bucket-notag-0plus1-0plus1(3), two-bucket-notag-0plus1-0(4), two-bucket-tag-0plus1-0(5), best-effort-tag(6) | ||
| atmSvcVccVUNIA | 1.3.6.1.4.1.1751.2.18.6.3.1.26 | ||
| VUNI to associate the Egress part of the B2A connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmSvcVccVUNIB | 1.3.6.1.4.1.1751.2.18.6.3.1.27 | ||
| VUNI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmSvcVccTrafficShapingA2B | 1.3.6.1.4.1.1751.2.18.6.3.1.28 | ||
| Traffic Shaping Support in the A2B direction. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| atmSvcVccTrafficShapingB2A | 1.3.6.1.4.1.1751.2.18.6.3.1.29 | ||
| Traffic Shaping Support in the B2A direction. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| ipAtmAppPvcVccTable | 1.3.6.1.4.1.1751.2.18.6.4 | ||
| Table about in-band management atm connection entries. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| IpAtmAppPvcVccEntry | |||
| ipAtmAppPvcVccEntry | 1.3.6.1.4.1.1751.2.18.6.4.1 | ||
| Row definition of in-band management atm connection attribution. | |||
| OBJECT-TYPE | |||
| IpAtmAppPvcVccEntry | |||
| ipAtmAppPvcVccDestAddrA | 1.3.6.1.4.1.1751.2.18.6.4.1.1 | ||
| Destination IP address of an in-band management- atm connection. Value is and IP address. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| ipAtmAppPvcVccSubnetMaskA | 1.3.6.1.4.1.1751.2.18.6.4.1.2 | ||
| The subnet mask of the destination IP address. Value is an IP address. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| ipAtmAppPvcVccIfB | 1.3.6.1.4.1.1751.2.18.6.4.1.3 | ||
| Interface index for side B, the atm side, of an in-band management-atm connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccVpiB | 1.3.6.1.4.1.1751.2.18.6.4.1.4 | ||
| VPI value for side B, the atm side, of an in-band management-atm connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| ipAtmAppPvcVccVciB | 1.3.6.1.4.1.1751.2.18.6.4.1.5 | ||
| VCI value for side B, the atm side, of an in-band management-atm connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| ipAtmAppPvcVccServiceTypeA2B | 1.3.6.1.4.1.1751.2.18.6.4.1.6 | ||
| Service type from side A to B | |||
| OBJECT-TYPE | |||
| INTEGER | ubr(1), vbr-express(2) | ||
| ipAtmAppPvcVccServiceTypeB2A | 1.3.6.1.4.1.1751.2.18.6.4.1.7 | ||
| Service type from side B to A | |||
| OBJECT-TYPE | |||
| INTEGER | ubr(1), vbr-express(2), gfr2(3) | ||
| ipAtmAppPvcVccPeakCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.4.1.8 | ||
| peak rate - side B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccSusCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.4.1.9 | ||
| sustained rate - side B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccMaxBurstSizeB2A | 1.3.6.1.4.1.1751.2.18.6.4.1.10 | ||
| maximum burst size - side B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccType | 1.3.6.1.4.1.1751.2.18.6.4.1.11 | ||
| Indicated in-band management atm connection type. | |||
| OBJECT-TYPE | |||
| INTEGER | primary(0), backup(1) | ||
| ipAtmAppPvcVccRowStatus | 1.3.6.1.4.1.1751.2.18.6.4.1.12 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| ipAtmAppPvcVccConnectionStatus | 1.3.6.1.4.1.1751.2.18.6.4.1.13 | ||
| Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. | |||
| OBJECT-TYPE | |||
| INTEGER | active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) | ||
| ipAtmAppPvcVccDualHomed | 1.3.6.1.4.1.1751.2.18.6.4.1.14 | ||
| Does this PVC need a backup Dual homing PVC. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| ipAtmAppPvcVccViB | 1.3.6.1.4.1.1751.2.18.6.4.1.15 | ||
| VI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| ipAtmAppPvcVccCnfrmTypeB2A | 1.3.6.1.4.1.1751.2.18.6.4.1.16 | ||
| The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. | |||
| OBJECT-TYPE | |||
| INTEGER | best-effort(1), one-bucket-notag-0plus1(2), two-bucket-notag-0plus1-0plus1(3), two-bucket-notag-0plus1-0(4), two-bucket-tag-0plus1-0(5), best-effort-tag(6) | ||
| ipAtmAppPvcVccVUNIB | 1.3.6.1.4.1.1751.2.18.6.4.1.17 | ||
| VUNI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| ipAtmAppPvcVccMfsB2A | 1.3.6.1.4.1.1751.2.18.6.4.1.18 | ||
| Maximum Frame Size for GFR traffic | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| ipAtmAppPvcVccConnFailureCauseB | 1.3.6.1.4.1.1751.2.18.6.4.1.19 | ||
| connection status reason code | |||
| OBJECT-TYPE | |||
| AtmConnFailureCause | |||
| ipAtmAppPvcVccTrafficShapingA2B | 1.3.6.1.4.1.1751.2.18.6.4.1.20 | ||
| Traffic Shaping Support in the A2B direction. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| ipAtmAppPvcVccOamStatus | 1.3.6.1.4.1.1751.2.18.6.4.1.21 | ||
| Indicates the OAM monitoring status. The 3 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will respond to AIS/RDI. End-Seg-Pt: Connection endPoint that is also a segment endPoint. | |||
| OBJECT-TYPE | |||
| INTEGER | unsupp(1), end-Pt(2), end-Seg-Pt(3) | ||
| ipAtmAppSvcVccTable | 1.3.6.1.4.1.1751.2.18.6.5 | ||
| Table of SVC VCC connection entries | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| IpAtmAppSvcVccEntry | |||
| ipAtmAppSvcVccEntry | 1.3.6.1.4.1.1751.2.18.6.5.1 | ||
| Row definition of SVC VCC connection attribution. | |||
| OBJECT-TYPE | |||
| IpAtmAppSvcVccEntry | |||
| ipAtmAppSvcVccDestAddrA | 1.3.6.1.4.1.1751.2.18.6.5.1.1 | ||
| Destination IP address,value is IP address. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| ipAtmAppSvcVccSubnetMaskA | 1.3.6.1.4.1.1751.2.18.6.5.1.2 | ||
| The subnet mask of the destination IP address. Value is an IP address. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| ipAtmAppSvcVccIfB | 1.3.6.1.4.1.1751.2.18.6.5.1.3 | ||
| interface index (slot/port/channel) SSPPCCC | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppSvcVccVpiB | 1.3.6.1.4.1.1751.2.18.6.5.1.4 | ||
| atm path identifier - side B | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| ipAtmAppSvcVccVciB | 1.3.6.1.4.1.1751.2.18.6.5.1.5 | ||
| atm channel identifier - side B | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| ipAtmAppSvcVccServiceTypeA2B | 1.3.6.1.4.1.1751.2.18.6.5.1.6 | ||
| Service type from side A to B. | |||
| OBJECT-TYPE | |||
| INTEGER | ubr(1), vbr-express(2) | ||
| ipAtmAppSvcVccServiceTypeB2A | 1.3.6.1.4.1.1751.2.18.6.5.1.7 | ||
| Service type from side B to A. | |||
| OBJECT-TYPE | |||
| INTEGER | ubr(1), vbr-express(2) | ||
| ipAtmAppSvcVccPeakCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.5.1.8 | ||
| peak rate - side B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppSvcVccSusCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.5.1.9 | ||
| sustained rate - side B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppSvcVccMaxBurstSizeB2A | 1.3.6.1.4.1.1751.2.18.6.5.1.10 | ||
| maximum burst size - side B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppSvcVccType | 1.3.6.1.4.1.1751.2.18.6.5.1.11 | ||
| Type of using SVC VCC connection. | |||
| OBJECT-TYPE | |||
| INTEGER | primary(0), backup(1) | ||
| ipAtmAppSvcVccConnectionStatus | 1.3.6.1.4.1.1751.2.18.6.5.1.12 | ||
| Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. | |||
| OBJECT-TYPE | |||
| INTEGER | active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) | ||
| ipAtmAppSvcVccViB | 1.3.6.1.4.1.1751.2.18.6.5.1.13 | ||
| VI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| ipAtmAppSvcVccCnfrmTypeB2A | 1.3.6.1.4.1.1751.2.18.6.5.1.14 | ||
| The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. | |||
| OBJECT-TYPE | |||
| INTEGER | best-effort(1), one-bucket-notag-0plus1(2), two-bucket-notag-0plus1-0plus1(3), two-bucket-notag-0plus1-0(4), two-bucket-tag-0plus1-0(5), best-effort-tag(6) | ||
| ipAtmAppSvcVccVUNIB | 1.3.6.1.4.1.1751.2.18.6.5.1.15 | ||
| VUNI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| ipAtmAppSvcVccTrafficShapingA2B | 1.3.6.1.4.1.1751.2.18.6.5.1.16 | ||
| Traffic Shaping Support in the A2B direction. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| cirEmAtmPvcVccTable | 1.3.6.1.4.1.1751.2.18.6.6 | ||
| Table of Circuit Emulation to ATM VCCs | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| CirEmAtmPvcVccEntry | |||
| cirEmAtmPvcVccEntry | 1.3.6.1.4.1.1751.2.18.6.6.1 | ||
| Row definition of circuit emulation to atm connections. | |||
| OBJECT-TYPE | |||
| CirEmAtmPvcVccEntry | |||
| cirEmAtmPvcVccIfA | 1.3.6.1.4.1.1751.2.18.6.6.1.1 | ||
| Interface index for side A, the circuit emulation side, of a circuit emulation-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| cirEmAtmPvcVccIfB | 1.3.6.1.4.1.1751.2.18.6.6.1.2 | ||
| Interface index for side B, the atm side, of a circuit emulation-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| cirEmAtmPvcVccVpiB | 1.3.6.1.4.1.1751.2.18.6.6.1.3 | ||
| VPI value for side B, the atm side, of a circuit emulation-atm PVC VCC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| cirEmAtmPvcVccVciB | 1.3.6.1.4.1.1751.2.18.6.6.1.4 | ||
| VCI value for side B, the atm side, of a circuit emulation-atm PVC VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| cirEmAtmPvcVccServiceType | 1.3.6.1.4.1.1751.2.18.6.6.1.5 | ||
| service type | |||
| OBJECT-TYPE | |||
| INTEGER | cbr-1(1), cbr-2(2), cbr-3(3), cbr-4(4) | ||
| cirEmAtmPvcVccVoiceCompressionA2B | 1.3.6.1.4.1.1751.2.18.6.6.1.6 | ||
| Voice Compression Algorithm | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), g726-16k(2), g726-24k(3), g726-32k(4), g726-40k(5), g729a-8k(6) | ||
| cirEmAtmPvcVccSilenceDetectionA2B | 1.3.6.1.4.1.1751.2.18.6.6.1.7 | ||
| silence detection off/on | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| cirEmAtmPvcVccEchoCancellationA2B | 1.3.6.1.4.1.1751.2.18.6.6.1.8 | ||
| Echo Cancellation Algorithm | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), g165-nearEnd(2), g168(3) | ||
| cirEmAtmPvcVccFlow | 1.3.6.1.4.1.1751.2.18.6.6.1.9 | ||
| Flow Type | |||
| OBJECT-TYPE | |||
| INTEGER | duplex(1), simplexA2B(2), simplexB2A(3), pointToMultipointA2B(4), pointToMultipointB2A(5) | ||
| cirEmAtmPvcVccRowStatus | 1.3.6.1.4.1.1751.2.18.6.6.1.10 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| cirEmAtmPvcVccCngToneDetectionA2B | 1.3.6.1.4.1.1751.2.18.6.6.1.11 | ||
| Calling Tone Detection Algorithm, one of the enum value, g726-32k(3) is obsoleted on 01Mar99 such that user would not be able to configure CE-ATM.Fax Relay is to allow detection of fax Calling Tones. In faxRelay Mode only Fax calling tone is detected . In fxRlyMdmBypass faxRelay is detected and Modem is done in bypass mode | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), bypass(2), g726-32k(3), faxRelay(4), fxRlyMdmBypass(5) | ||
| cirEmAtmPvcVccCodingTranslationA2B | 1.3.6.1.4.1.1751.2.18.6.6.1.12 | ||
| Coding rule translation type. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), muLaw2muLaw(2), aLaw2aLaw(3), muLaw2aLaw(4), aLaw2muLaw(5) | ||
| cirEmAtmPvcVccVoiceCompressionB2A | 1.3.6.1.4.1.1751.2.18.6.6.1.13 | ||
| Voice Compression Algorithm | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), g726-16k(2), g726-24k(3), g726-32k(4), g726-40k(5), g729a-8k(6) | ||
| cirEmAtmPvcVccSilenceDetectionB2A | 1.3.6.1.4.1.1751.2.18.6.6.1.14 | ||
| silence detection off/on | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| cirEmAtmPvcVccEchoCancellationB2A | 1.3.6.1.4.1.1751.2.18.6.6.1.15 | ||
| Echo Cancellation Algorithm | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), g165-nearEnd(2), g168(3) | ||
| cirEmAtmPvcVccCngToneDetectionB2A | 1.3.6.1.4.1.1751.2.18.6.6.1.16 | ||
| Calling Tone Detection Algorithm, one of the enum value, g726-32k(3) is obsoleted on 01Mar99 such that user would not be able to configure CE-ATM.Fax Relay is to allow detection of fax Calling Tones. In faxRelay Mode only Fax calling tone is detected . In fxRlyMdmBypass faxRelay is detected and Modem is done in bypass mode | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), bypass(2), g726-32k(3), faxRelay(4), fxRlyMdmBypass(5) | ||
| cirEmAtmPvcVccCodingTranslationB2A | 1.3.6.1.4.1.1751.2.18.6.6.1.17 | ||
| Coding rule translation type. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), muLaw2muLaw(2), aLaw2aLaw(3), muLaw2aLaw(4), aLaw2muLaw(5) | ||
| cirEmAtmPvcVccSarTypeB | 1.3.6.1.4.1.1751.2.18.6.6.1.18 | ||
| This field will only be used when selecting voice compression, in other cases it will be set to aal1. | |||
| OBJECT-TYPE | |||
| INTEGER | aal2(3), aal1(4), aal2Std(5) | ||
| cirEmAtmPvcVccConnectionStatus | 1.3.6.1.4.1.1751.2.18.6.6.1.19 | ||
| Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. | |||
| OBJECT-TYPE | |||
| INTEGER | active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) | ||
| cirEmAtmPvcVccDualHomed | 1.3.6.1.4.1.1751.2.18.6.6.1.20 | ||
| Does this PVC need a backup Dual homing PVC. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| cirEmAtmPvcVccOamStatus | 1.3.6.1.4.1.1751.2.18.6.6.1.21 | ||
| Indicates the OAM monitoring status of side A. The 2 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will respond to AIS/RDI. | |||
| OBJECT-TYPE | |||
| INTEGER | unsupp(1), end-Pt(2), end-Seg-Pt(3) | ||
| cirEmAtmPvcVccViB | 1.3.6.1.4.1.1751.2.18.6.6.1.22 | ||
| VI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| cirEmAtmPvcVccCnfrmTypeB2A | 1.3.6.1.4.1.1751.2.18.6.6.1.23 | ||
| The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. | |||
| OBJECT-TYPE | |||
| INTEGER | best-effort(1), one-bucket-notag-0plus1(2), two-bucket-notag-0plus1-0plus1(3), two-bucket-notag-0plus1-0(4), two-bucket-tag-0plus1-0(5), best-effort-tag(6) | ||
| cirEmAtmPvcVccVUNIB | 1.3.6.1.4.1.1751.2.18.6.6.1.24 | ||
| VUNI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| cirEmAtmPvcVccAal2Cid | 1.3.6.1.4.1.1751.2.18.6.6.1.25 | ||
| Aal2 Cid Used to pack ce chan in an Atm Trunk. This value will be unique per Atm Trunk. This field will be applicable when Aal type is chosen to be Standard Aal2. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| cirEmAtmPvcVccOAMConnEndPtStatus | 1.3.6.1.4.1.1751.2.18.6.6.1.26 | ||
| Connection endpoint status. Valid only at connection endpoint. | |||
| OBJECT-TYPE | |||
| INTEGER | ete-active(1), ete-ais-state(2), ete-rdi-state(3), ete-ais-rdi-state(4) | ||
| cirEmAtmPvcVccOAMConnSegEndPtStatus | 1.3.6.1.4.1.1751.2.18.6.6.1.27 | ||
| Segment endpoint status. Valid only at segment/connection endpoints. | |||
| OBJECT-TYPE | |||
| INTEGER | seg-active(1), seg-ais-state(2), seg-rdi-state(3), seg-ais-rdi-state(4) | ||
| cirEmAtmPvcVccConnFailureCauseA | 1.3.6.1.4.1.1751.2.18.6.6.1.28 | ||
| connestion status reason code | |||
| OBJECT-TYPE | |||
| ConnFailureCause | |||
| cirEmAtmPvcVccConnFailureCauseB | 1.3.6.1.4.1.1751.2.18.6.6.1.29 | ||
| connection status reason code | |||
| OBJECT-TYPE | |||
| AtmConnFailureCause | |||
| cirEmAtmPvcVccDigitCollectTypeA2B | 1.3.6.1.4.1.1751.2.18.6.6.1.30 | ||
| Identify the digital tone setting. dtmf -- dual tone multifrequency dialed digits, mf -- multifrequency dialed digits, mf-r2-frwd -- R2 multifrequency forward dialed digits. mf-r2-bkwd-- R2 multifrequency backward dialed digits | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), dtmf(2), mf(3), mf-r2-frwd(4), mf-r2-bkwd(5) | ||
| cirEmAtmPvcVccDigitCollectTypeB2A | 1.3.6.1.4.1.1751.2.18.6.6.1.31 | ||
| Identify the digital tone setting. dtmf -- dual tone multifrequency dialed digits, mf -- multifrequency dialed digits, mf-r2-frwd -- R2 multifrequency forward dialed digits. mf-r2-bkwd-- R2 multifrequency backward dialed digits | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), dtmf(2), mf(3), mf-r2-frwd(4), mf-r2-bkwd(5) | ||
| cirEmAtmPvcVccEncodingStdA2B | 1.3.6.1.4.1.1751.2.18.6.6.1.32 | ||
| These are profiles defined according to standards User-Profile - No restrictions or checks, user freedom to choose any combination of Params. Atm Forum - These are profies defined by AF in document AF-VMOA-0145.000. In these cases the Identifiers are used and not the table numbers. Itu-t - These profiles are used from the I-366-2. | |||
| OBJECT-TYPE | |||
| INTEGER | user(1), atmForum(2), itu-t(3) | ||
| cirEmAtmPvcVccEncodingStdB2A | 1.3.6.1.4.1.1751.2.18.6.6.1.33 | ||
| These are profiles defined according to standards User-Profile - No restrictions or checks, user freedom to choose any combination of Params. Atm Forum - These are profies defined by AF in document AF-VMOA-0145.000. In these cases the Identifiers are used and not the table numbers. Itu-t - These profiles are used from the I-366-2. | |||
| OBJECT-TYPE | |||
| INTEGER | user(1), atmForum(2), itu-t(3) | ||
| cirEmAtmPvcVccEncodingProfileIdA2B | 1.3.6.1.4.1.1751.2.18.6.6.1.34 | ||
| These are profiles defined according to standards User-Profile - No restrictions or checks, user freedom to choose any combination of Params. Atm Forum - These are profies defined by AF in document AF-VMOA-0145.000. In these cases the Identifiers are used and not the table numbers. Itu-t - These profiles are used from the I-366-2. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..256 | ||
| cirEmAtmPvcVccEncodingProfileIdB2A | 1.3.6.1.4.1.1751.2.18.6.6.1.35 | ||
| These are profiles defined according to standards User-Profile - No restrictions or checks, user freedom to choose any combination of Params. Atm Forum - These are profies defined by AF in document AF-VMOA-0145.000. In these cases the Identifiers are used and not the table numbers. Itu-t - These profiles are used from the I-366-2. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..256 | ||
| frAtmPvcVccTable | 1.3.6.1.4.1.1751.2.18.6.7 | ||
| Table of frame relay to ATM IWF connections | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| FrAtmPvcVccEntry | |||
| frAtmPvcVccEntry | 1.3.6.1.4.1.1751.2.18.6.7.1 | ||
| Row definition of frame relay to ATM IWF connections | |||
| OBJECT-TYPE | |||
| FrAtmPvcVccEntry | |||
| frAtmPvcVccIfA | 1.3.6.1.4.1.1751.2.18.6.7.1.1 | ||
| Interface index for side A, the frame relay side, of a frame relay-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| frAtmPvcVccDlciA | 1.3.6.1.4.1.1751.2.18.6.7.1.2 | ||
| DLCI value for side A, the frame relay side, of a frame relay-atm PVC VCC connection. Valid range is a number between 0 and 1023. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccIfB | 1.3.6.1.4.1.1751.2.18.6.7.1.3 | ||
| Interface index for side B, the atm side, of a frame relay-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| frAtmPvcVccVpiB | 1.3.6.1.4.1.1751.2.18.6.7.1.4 | ||
| VPI value for side B, the atm side, of a frame relay-atm PVC VCC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| frAtmPvcVccVciB | 1.3.6.1.4.1.1751.2.18.6.7.1.5 | ||
| VCI value for side B, the atm side, of a frame relay-atm PVC VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| frAtmPvcVccMaxFrameSizeIn | 1.3.6.1.4.1.1751.2.18.6.7.1.6 | ||
| The value of this object is the size in octets of the largest frame relay information field for this PVC in the ingress direction (out of the frame relay UNI). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccBcIn | 1.3.6.1.4.1.1751.2.18.6.7.1.7 | ||
| The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC in the ingress direction (into the frame relay UNI). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccBeIn | 1.3.6.1.4.1.1751.2.18.6.7.1.8 | ||
| The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC in the ingress direction (into the frame relay UNI). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccCirIn | 1.3.6.1.4.1.1751.2.18.6.7.1.9 | ||
| The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC in the ingress direction (into the frame relay UNI). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccMaxFrameSizeOut | 1.3.6.1.4.1.1751.2.18.6.7.1.10 | ||
| The value of this object is the size in octets of the largest frame relay information field for this PVC in the egress direction (out of the frame relay UNI). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccBcOut | 1.3.6.1.4.1.1751.2.18.6.7.1.11 | ||
| The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC in the egress direction (into the frame relay UNI). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccBeOut | 1.3.6.1.4.1.1751.2.18.6.7.1.12 | ||
| The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC in the egress direction (into the frame relay UNI) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccCirOut | 1.3.6.1.4.1.1751.2.18.6.7.1.13 | ||
| The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC in the egress direction (into the frame relay UNI). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccServiceType | 1.3.6.1.4.1.1751.2.18.6.7.1.14 | ||
| service type, Frame relay traffic is carried by VBR type of service only. | |||
| OBJECT-TYPE | |||
| INTEGER | ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), gfr2(7) | ||
| frAtmPvcVccFlow | 1.3.6.1.4.1.1751.2.18.6.7.1.15 | ||
| Flow Type | |||
| OBJECT-TYPE | |||
| INTEGER | duplex(1), simplexA2B(2), simplexB2A(3) | ||
| frAtmPvcVccRowStatus | 1.3.6.1.4.1.1751.2.18.6.7.1.16 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| frAtmPvcVccTimeLenIn | 1.3.6.1.4.1.1751.2.18.6.7.1.17 | ||
| The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds. | |||
| OBJECT-TYPE | |||
| INTEGER | 64..4000 | ||
| frAtmPvcVccInterWorkingFuncIn | 1.3.6.1.4.1.1751.2.18.6.7.1.18 | ||
| InterWorking function. | |||
| OBJECT-TYPE | |||
| INTEGER | frf8-Transl(1), frf8-Pass(2), frf5(3) | ||
| frAtmPvcVccTimeLenOut | 1.3.6.1.4.1.1751.2.18.6.7.1.19 | ||
| The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds. | |||
| OBJECT-TYPE | |||
| INTEGER | 64..4000 | ||
| frAtmPvcVccInterWorkingFuncOut | 1.3.6.1.4.1.1751.2.18.6.7.1.20 | ||
| InterWorking function. | |||
| OBJECT-TYPE | |||
| INTEGER | frf8-Transl(1), frf8-Pass(2), frf5(3) | ||
| frAtmPvcVccPeakCellRateA2B | 1.3.6.1.4.1.1751.2.18.6.7.1.21 | ||
| Peak cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccSusCellRateA2B | 1.3.6.1.4.1.1751.2.18.6.7.1.22 | ||
| Sustained cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccMaxBurstSizeA2B | 1.3.6.1.4.1.1751.2.18.6.7.1.23 | ||
| Maximum burst size - side A, in cells, this will reflect the frame relay parameters in atm terms. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccPeakCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.7.1.24 | ||
| Peak cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccSusCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.7.1.25 | ||
| Sustained cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccMaxBurstSizeB2A | 1.3.6.1.4.1.1751.2.18.6.7.1.26 | ||
| Maximum burst size - side B, in cells, this will reflect the frame relay parameters in atm terms. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccConnectionStatus | 1.3.6.1.4.1.1751.2.18.6.7.1.27 | ||
| Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. | |||
| OBJECT-TYPE | |||
| INTEGER | active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) | ||
| frAtmPvcVccDualHomed | 1.3.6.1.4.1.1751.2.18.6.7.1.28 | ||
| Does this PVC need a backup Dual homing PVC. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| frAtmPvcVccOamStatus | 1.3.6.1.4.1.1751.2.18.6.7.1.29 | ||
| Indicates the OAM monitoring status of side A. The 2 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will respond to AIS/RDI. | |||
| OBJECT-TYPE | |||
| INTEGER | unsupp(1), end-Pt(2), end-Seg-Pt(3) | ||
| frAtmPvcVccViB | 1.3.6.1.4.1.1751.2.18.6.7.1.30 | ||
| VI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| frAtmPvcVccCnfrmTypeB2A | 1.3.6.1.4.1.1751.2.18.6.7.1.31 | ||
| The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. | |||
| OBJECT-TYPE | |||
| INTEGER | best-effort(1), one-bucket-notag-0plus1(2), two-bucket-notag-0plus1-0plus1(3), two-bucket-notag-0plus1-0(4), two-bucket-tag-0plus1-0(5), best-effort-tag(6) | ||
| frAtmPvcVccVUNIB | 1.3.6.1.4.1.1751.2.18.6.7.1.32 | ||
| VUNI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| frAtmPvcVccOAMConnEndPtStatus | 1.3.6.1.4.1.1751.2.18.6.7.1.33 | ||
| Connection endpoint status. Valid only at connection endpoint. | |||
| OBJECT-TYPE | |||
| INTEGER | ete-active(1), ete-ais-state(2), ete-rdi-state(3), ete-ais-rdi-state(4) | ||
| frAtmPvcVccOAMSegEndPtStatus | 1.3.6.1.4.1.1751.2.18.6.7.1.34 | ||
| Segment endpoint status. Valid only at segment/connection endpoint. | |||
| OBJECT-TYPE | |||
| INTEGER | seg-active(1), seg-ais-state(2), seg-rdi-state(3), seg-ais-rdi-state(4) | ||
| frAtmPvcVccMfsB2A | 1.3.6.1.4.1.1751.2.18.6.7.1.35 | ||
| Maximum Frame Size for GFR traffic | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| frAtmPvcVccConnFailureCauseA | 1.3.6.1.4.1.1751.2.18.6.7.1.36 | ||
| connestion status reason code | |||
| OBJECT-TYPE | |||
| FrConnFailureCause | |||
| frAtmPvcVccConnFailureCauseB | 1.3.6.1.4.1.1751.2.18.6.7.1.37 | ||
| connection status reason code | |||
| OBJECT-TYPE | |||
| AtmConnFailureCause | |||
| frAtmPvcVccTrafficShapingA2B | 1.3.6.1.4.1.1751.2.18.6.7.1.38 | ||
| Traffic Shaping Support in the A2B direction. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| frFrPvcTable | 1.3.6.1.4.1.1751.2.18.6.8 | ||
| Table of frame relay to frame relay connections | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| FrFrPvcEntry | |||
| frFrPvcEntry | 1.3.6.1.4.1.1751.2.18.6.8.1 | ||
| Row definition of frame relay to frame relay PVC connections | |||
| OBJECT-TYPE | |||
| FrFrPvcEntry | |||
| frFrPvcIfA | 1.3.6.1.4.1.1751.2.18.6.8.1.1 | ||
| Interface index for side A of a frame relay-frame relay PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| frFrPvcDlciA | 1.3.6.1.4.1.1751.2.18.6.8.1.2 | ||
| DLCI value for side A of a frame relay-frame relay PVC connection. Valid range is a number between 0 and 1023. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcIfB | 1.3.6.1.4.1.1751.2.18.6.8.1.3 | ||
| Interface index for side B of a frame relay-frame relay PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| frFrPvcDlciB | 1.3.6.1.4.1.1751.2.18.6.8.1.4 | ||
| DLCI value for side B of a frame relay-frame relay PVC connection. Valid range is a number between 0 and 1023. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcMaxFrameSizeA2B | 1.3.6.1.4.1.1751.2.18.6.8.1.5 | ||
| The value of this object is the size in octets of the largest frame relay information field for this PVC in the A to B direction. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcBcA2B | 1.3.6.1.4.1.1751.2.18.6.8.1.6 | ||
| The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC in the A to B direction. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcBeA2B | 1.3.6.1.4.1.1751.2.18.6.8.1.7 | ||
| The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC in the A to B direction. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcCirA2B | 1.3.6.1.4.1.1751.2.18.6.8.1.8 | ||
| The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC in the A to B direction. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcMaxFrameSizeB2A | 1.3.6.1.4.1.1751.2.18.6.8.1.9 | ||
| The value of this object is the size in octets of the largest frame relay information field for this PVC in the B to A direction. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcBcB2A | 1.3.6.1.4.1.1751.2.18.6.8.1.10 | ||
| The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC in the B to A direction. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcBeB2A | 1.3.6.1.4.1.1751.2.18.6.8.1.11 | ||
| The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC in the B to A direction. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcCirB2A | 1.3.6.1.4.1.1751.2.18.6.8.1.12 | ||
| The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC in the B to A direction. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcServiceType | 1.3.6.1.4.1.1751.2.18.6.8.1.13 | ||
| service type, Frame relay traffic is carried by VBR type of service only. | |||
| OBJECT-TYPE | |||
| INTEGER | ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6) | ||
| frFrPvcFlow | 1.3.6.1.4.1.1751.2.18.6.8.1.14 | ||
| Flow Type | |||
| OBJECT-TYPE | |||
| INTEGER | duplex(1), simplexA2B(2) | ||
| frFrPvcRowStatus | 1.3.6.1.4.1.1751.2.18.6.8.1.15 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| frFrPvcTimeLenA2B | 1.3.6.1.4.1.1751.2.18.6.8.1.16 | ||
| The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds. | |||
| OBJECT-TYPE | |||
| INTEGER | 64..4000 | ||
| frFrPvcInterWorkingFuncA2B | 1.3.6.1.4.1.1751.2.18.6.8.1.17 | ||
| InterWorking function. | |||
| OBJECT-TYPE | |||
| INTEGER | frf8-Transl(1), frf8-Pass(2), frf5(3) | ||
| frFrPvcTimeLenB2A | 1.3.6.1.4.1.1751.2.18.6.8.1.18 | ||
| The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds. | |||
| OBJECT-TYPE | |||
| INTEGER | 64..4000 | ||
| frFrPvcInterWorkingFuncB2A | 1.3.6.1.4.1.1751.2.18.6.8.1.19 | ||
| InterWorking function. | |||
| OBJECT-TYPE | |||
| INTEGER | frf8-Transl(1), frf8-Pass(2), frf5(3) | ||
| frFrPvcPeakCellRateA2B | 1.3.6.1.4.1.1751.2.18.6.8.1.20 | ||
| Peak cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcSusCellRateA2B | 1.3.6.1.4.1.1751.2.18.6.8.1.21 | ||
| Sustained cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcMaxBurstSizeA2B | 1.3.6.1.4.1.1751.2.18.6.8.1.22 | ||
| Maximum burst size - side A, in cells, this will reflect the frame relay parameters in atm terms. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcPeakCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.8.1.23 | ||
| Peak cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcSusCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.8.1.24 | ||
| Sustained cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcMaxBurstSizeB2A | 1.3.6.1.4.1.1751.2.18.6.8.1.25 | ||
| Maximum burst size - side B, in cells, this will reflect the frame relay parameters in atm terms. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcConnectionStatus | 1.3.6.1.4.1.1751.2.18.6.8.1.26 | ||
| Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. | |||
| OBJECT-TYPE | |||
| INTEGER | active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) | ||
| frFrPvcConnFailureCauseA | 1.3.6.1.4.1.1751.2.18.6.8.1.27 | ||
| connestion status reason code | |||
| OBJECT-TYPE | |||
| FrConnFailureCause | |||
| frFrPvcConnFailureCauseB | 1.3.6.1.4.1.1751.2.18.6.8.1.28 | ||
| connection status reason code | |||
| OBJECT-TYPE | |||
| FrConnFailureCause | |||
| vbrAtmPvcVccTable | 1.3.6.1.4.1.1751.2.18.6.9 | ||
| Table of terminal emulation to ATM network IWF connections | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| VbrAtmPvcVccEntry | |||
| vbrAtmPvcVccEntry | 1.3.6.1.4.1.1751.2.18.6.9.1 | ||
| Row definition of terminal emulation to ATM network IWF connections | |||
| OBJECT-TYPE | |||
| VbrAtmPvcVccEntry | |||
| vbrAtmPvcVccIfA | 1.3.6.1.4.1.1751.2.18.6.9.1.1 | ||
| Interface index for side A, the variable bit rate side, of a variable bit rate-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| vbrAtmPvcVccIfB | 1.3.6.1.4.1.1751.2.18.6.9.1.2 | ||
| Interface index for side B, the atm side, of a variable bit rate-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| vbrAtmPvcVccVpiB | 1.3.6.1.4.1.1751.2.18.6.9.1.3 | ||
| VPI value for side B, the atm side, of a variable bit rate-atm PVC VCC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| vbrAtmPvcVccVciB | 1.3.6.1.4.1.1751.2.18.6.9.1.4 | ||
| VCI value for side B, the atm side, of a variable bit rate-atm PVC VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| vbrAtmPvcVccServiceType | 1.3.6.1.4.1.1751.2.18.6.9.1.5 | ||
| service type | |||
| OBJECT-TYPE | |||
| INTEGER | ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), gfr2(7) | ||
| vbrAtmPvcVccPeakCellRateA2B | 1.3.6.1.4.1.1751.2.18.6.9.1.6 | ||
| peak cell rate - side A, in cell per second | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccSusCellRateA2B | 1.3.6.1.4.1.1751.2.18.6.9.1.7 | ||
| sustained rate - side A, in cell per second | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccMaxBurstSizeA2B | 1.3.6.1.4.1.1751.2.18.6.9.1.8 | ||
| maximum burst size - side A, in cells | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccPeakCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.9.1.9 | ||
| peak rate - side B, in cell per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccSusCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.9.1.10 | ||
| sustained rate - side B, in cell per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccMaxBurstSizeB2A | 1.3.6.1.4.1.1751.2.18.6.9.1.11 | ||
| maximum burst size - side B, in cells. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccFlow | 1.3.6.1.4.1.1751.2.18.6.9.1.12 | ||
| Flow type | |||
| OBJECT-TYPE | |||
| INTEGER | duplex(1), simplexA2B(2), simplexB2A(3) | ||
| vbrAtmPvcVccRowStatus | 1.3.6.1.4.1.1751.2.18.6.9.1.13 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| vbrAtmPvcVccConnectionStatus | 1.3.6.1.4.1.1751.2.18.6.9.1.14 | ||
| Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. | |||
| OBJECT-TYPE | |||
| INTEGER | active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) | ||
| vbrAtmPvcVccDualHomed | 1.3.6.1.4.1.1751.2.18.6.9.1.15 | ||
| Does this PVC need a backup Dual homing PVC. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| vbrAtmPvcVccOamStatus | 1.3.6.1.4.1.1751.2.18.6.9.1.16 | ||
| Indicates the OAM monitoring status of side A. The 2 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will respond to AIS/RDI. End-Seg-Pt: Connection endPoint that is also a segment endPoint. | |||
| OBJECT-TYPE | |||
| INTEGER | unsupp(1), end-Pt(2), end-Seg-Pt(3) | ||
| vbrAtmPvcVccViB | 1.3.6.1.4.1.1751.2.18.6.9.1.17 | ||
| VI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| vbrAtmPvcVccCnfrmTypeB2A | 1.3.6.1.4.1.1751.2.18.6.9.1.18 | ||
| The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. | |||
| OBJECT-TYPE | |||
| INTEGER | best-effort(1), one-bucket-notag-0plus1(2), two-bucket-notag-0plus1-0plus1(3), two-bucket-notag-0plus1-0(4), two-bucket-tag-0plus1-0(5), best-effort-tag(6) | ||
| vbrAtmPvcVccVUNIB | 1.3.6.1.4.1.1751.2.18.6.9.1.19 | ||
| VUNI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| vbrAtmPvcVccOAMConnEndPtStatus | 1.3.6.1.4.1.1751.2.18.6.9.1.20 | ||
| Connection endpoint status. Valid only at connection endpoint. | |||
| OBJECT-TYPE | |||
| INTEGER | ete-active(1), ete-ais-state(2), ete-rdi-state(3), ete-ais-rdi-state(4) | ||
| vbrAtmPvcVccOAMSegEndPtStatus | 1.3.6.1.4.1.1751.2.18.6.9.1.21 | ||
| Segment endpoint status. Valid only at segment/connection endpoint. | |||
| OBJECT-TYPE | |||
| INTEGER | seg-active(1), seg-ais-state(2), seg-rdi-state(3), seg-ais-rdi-state(4) | ||
| vbrAtmPvcVccMfsB2A | 1.3.6.1.4.1.1751.2.18.6.9.1.22 | ||
| Maximum Frame Size for GFR traffic | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| vbrAtmPvcVccConnFailureCauseA | 1.3.6.1.4.1.1751.2.18.6.9.1.23 | ||
| connestion status reason code | |||
| OBJECT-TYPE | |||
| ConnFailureCause | |||
| vbrAtmPvcVccConnFailureCauseB | 1.3.6.1.4.1.1751.2.18.6.9.1.24 | ||
| connection status reason code | |||
| OBJECT-TYPE | |||
| AtmConnFailureCause | |||
| vbrAtmPvcVccSarTypeB | 1.3.6.1.4.1.1751.2.18.6.9.1.25 | ||
| This field will be used to connect hdlc to atm directly when sar type is none or aal5 or go through dsp2 first when sar type is aal2Std. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), aal5(2), aal2Std(3) | ||
| vbrAtmPvcVccAal2Cid | 1.3.6.1.4.1.1751.2.18.6.9.1.26 | ||
| Aal2 Cid Used to pack hdlc chan in an Atm Trunk. This value will be unique per Atm Trunk. This field will be applicable when Aal type is chosen to be Standard Aal2. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| vbrAtmPvcVccTrafficShapingA2B | 1.3.6.1.4.1.1751.2.18.6.9.1.27 | ||
| Traffic Shaping Support in the A2B direction. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| cirEmCirEmPvcTable | 1.3.6.1.4.1.1751.2.18.6.10 | ||
| Table of Circuit Emulation to Circuit Emulation | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| CirEmCirEmPvcEntry | |||
| cirEmCirEmPvcEntry | 1.3.6.1.4.1.1751.2.18.6.10.1 | ||
| Row definition of circuit emulation to circuit emulation connections. | |||
| OBJECT-TYPE | |||
| CirEmCirEmPvcEntry | |||
| cirEmCirEmPvcIfA | 1.3.6.1.4.1.1751.2.18.6.10.1.1 | ||
| Interface index for side A of a circuit emulation-circuit emulation PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| cirEmCirEmPvcIfB | 1.3.6.1.4.1.1751.2.18.6.10.1.2 | ||
| Interface index for side B of a circuit emulation-circuit emulation PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| cirEmCirEmPvcEchoCancellationA2B | 1.3.6.1.4.1.1751.2.18.6.10.1.5 | ||
| Echo cancellation off/on | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), g165-nearEnd(2), g168(3) | ||
| cirEmCirEmPvcFlow | 1.3.6.1.4.1.1751.2.18.6.10.1.6 | ||
| Flow Type | |||
| OBJECT-TYPE | |||
| INTEGER | duplex(1), simplexA2B(2) | ||
| cirEmCirEmPvcRowStatus | 1.3.6.1.4.1.1751.2.18.6.10.1.7 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| cirEmCirEmPvcCodingTranslationA2B | 1.3.6.1.4.1.1751.2.18.6.10.1.8 | ||
| Coding rule translation type. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), muLaw2muLaw(2), aLaw2aLaw(3), muLaw2aLaw(4), aLaw2muLaw(5) | ||
| cirEmCirEmPvcEchoCancellationB2A | 1.3.6.1.4.1.1751.2.18.6.10.1.9 | ||
| Echo cancellation off/on | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), g165-nearEnd(2), g168(3) | ||
| cirEmCirEmPvcCodingTranslationB2A | 1.3.6.1.4.1.1751.2.18.6.10.1.10 | ||
| Coding rule translation type. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), muLaw2muLaw(2), aLaw2aLaw(3), muLaw2aLaw(4), aLaw2muLaw(5) | ||
| cirEmCirEmPvcConnectionStatus | 1.3.6.1.4.1.1751.2.18.6.10.1.11 | ||
| Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. | |||
| OBJECT-TYPE | |||
| INTEGER | active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) | ||
| cirEmCirEmPvcInterworking | 1.3.6.1.4.1.1751.2.18.6.10.1.12 | ||
| CE - CE interworking enable/disabled | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| cirEmCirEmPvcServiceType | 1.3.6.1.4.1.1751.2.18.6.10.1.13 | ||
| service type | |||
| OBJECT-TYPE | |||
| INTEGER | cbr-1(1), cbr-2(2), cbr-3(3), cbr-4(4) | ||
| cirEmCirEmPvcConnFailureCauseA | 1.3.6.1.4.1.1751.2.18.6.10.1.14 | ||
| connestion status reason code | |||
| OBJECT-TYPE | |||
| ConnFailureCause | |||
| cirEmCirEmPvcConnFailureCauseB | 1.3.6.1.4.1.1751.2.18.6.10.1.15 | ||
| connection status reason code | |||
| OBJECT-TYPE | |||
| ConnFailureCause | |||
| vbrVbrPvcTable | 1.3.6.1.4.1.1751.2.18.6.11 | ||
| Table of terminal emulation to ATM network IWF connections | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| VbrVbrPvcEntry | |||
| vbrVbrPvcEntry | 1.3.6.1.4.1.1751.2.18.6.11.1 | ||
| Row definition of terminal emulation to ATM network IWF connections | |||
| OBJECT-TYPE | |||
| VbrVbrPvcEntry | |||
| vbrVbrPvcIfA | 1.3.6.1.4.1.1751.2.18.6.11.1.1 | ||
| Interface index for side A of a variable bit rate-variable bit rate PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| vbrVbrPvcIfB | 1.3.6.1.4.1.1751.2.18.6.11.1.2 | ||
| Interface index for side B of a variable bit rate-variable bit rate PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| vbrVbrPvcPeakCellRateA2B | 1.3.6.1.4.1.1751.2.18.6.11.1.3 | ||
| peak cell rate - side A, in cell per second | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrVbrPvcSusCellRateA2B | 1.3.6.1.4.1.1751.2.18.6.11.1.4 | ||
| sustained rate - side A, in cell per second | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrVbrPvcMaxBurstSizeA2B | 1.3.6.1.4.1.1751.2.18.6.11.1.5 | ||
| maximum burst size - side A, in cells | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrVbrPvcPeakCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.11.1.6 | ||
| peak rate - side B, in cell per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrVbrPvcSusCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.11.1.7 | ||
| sustained rate - side B, in cell per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrVbrPvcMaxBurstSizeB2A | 1.3.6.1.4.1.1751.2.18.6.11.1.8 | ||
| maximum burst size - side B, in cells. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrVbrPvcFlow | 1.3.6.1.4.1.1751.2.18.6.11.1.9 | ||
| Flow Type | |||
| OBJECT-TYPE | |||
| INTEGER | duplex(1), simplexA2B(2) | ||
| vbrVbrPvcRowStatus | 1.3.6.1.4.1.1751.2.18.6.11.1.10 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| vbrVbrPvcConnectionStatus | 1.3.6.1.4.1.1751.2.18.6.11.1.11 | ||
| Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. | |||
| OBJECT-TYPE | |||
| INTEGER | active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) | ||
| vbrVbrPvcServiceType | 1.3.6.1.4.1.1751.2.18.6.11.1.12 | ||
| service type | |||
| OBJECT-TYPE | |||
| INTEGER | ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6) | ||
| vbrVbrPvcConnFailureCauseA | 1.3.6.1.4.1.1751.2.18.6.11.1.13 | ||
| connestion status reason code | |||
| OBJECT-TYPE | |||
| ConnFailureCause | |||
| vbrVbrPvcConnFailureCauseB | 1.3.6.1.4.1.1751.2.18.6.11.1.14 | ||
| connection status reason code | |||
| OBJECT-TYPE | |||
| ConnFailureCause | |||
| bridgeBridgePvcTable | 1.3.6.1.4.1.1751.2.18.6.12 | ||
| A table of bridge-bridge PVC connection | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| BridgeBridgePvcEntry | |||
| bridgeBridgePvcEntry | 1.3.6.1.4.1.1751.2.18.6.12.1 | ||
| Row definitions of bridge-bridge PVC connection attributes | |||
| OBJECT-TYPE | |||
| BridgeBridgePvcEntry | |||
| bridgeBridgePvcIfA | 1.3.6.1.4.1.1751.2.18.6.12.1.1 | ||
| Interface index for side A of a bridge-bridge PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeBridgePvcIfB | 1.3.6.1.4.1.1751.2.18.6.12.1.2 | ||
| Interface index for side B of a bridge-bridge PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeBridgePvcRowStatus | 1.3.6.1.4.1.1751.2.18.6.12.1.3 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| bridgeBridgePvcConnectionStatus | 1.3.6.1.4.1.1751.2.18.6.12.1.4 | ||
| Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. | |||
| OBJECT-TYPE | |||
| INTEGER | active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) | ||
| bridgeBridgePvcConnFailureCauseA | 1.3.6.1.4.1.1751.2.18.6.12.1.5 | ||
| connestion status reason code | |||
| OBJECT-TYPE | |||
| ConnFailureCause | |||
| bridgeBridgePvcConnFailureCauseB | 1.3.6.1.4.1.1751.2.18.6.12.1.6 | ||
| connection status reason code | |||
| OBJECT-TYPE | |||
| ConnFailureCause | |||
| bridgeAtmPvcVccTable | 1.3.6.1.4.1.1751.2.18.6.13 | ||
| Table of bridge Atm PVC VCC connection entries | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| BridgeAtmPvcVccEntry | |||
| bridgeAtmPvcVccEntry | 1.3.6.1.4.1.1751.2.18.6.13.1 | ||
| Row definition of bridge atm PVC VCC connection attribution. | |||
| OBJECT-TYPE | |||
| BridgeAtmPvcVccEntry | |||
| bridgeAtmPvcVccIfA | 1.3.6.1.4.1.1751.2.18.6.13.1.1 | ||
| Interface index for side A, the bridge side, of a bridge-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccIfB | 1.3.6.1.4.1.1751.2.18.6.13.1.2 | ||
| Interface index for side B, the atm side, of a bridge-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccVpiB | 1.3.6.1.4.1.1751.2.18.6.13.1.3 | ||
| VPI value for side B, the atm side, of a bridge-atm PVC VCC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| bridgeAtmPvcVccVciB | 1.3.6.1.4.1.1751.2.18.6.13.1.4 | ||
| VCI value for side B, the atm side, of a bridge-atm PVC VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| bridgeAtmPvcVccServiceType | 1.3.6.1.4.1.1751.2.18.6.13.1.5 | ||
| service type | |||
| OBJECT-TYPE | |||
| INTEGER | ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), gfr2(7) | ||
| bridgeAtmPvcVccPeakCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.13.1.6 | ||
| peak rate - side B, in cell per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccSusCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.13.1.7 | ||
| sustained rate - side B, in cell per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccMaxBurstSizeB2A | 1.3.6.1.4.1.1751.2.18.6.13.1.8 | ||
| maximum burst size - side B, in cells. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccRowStatus | 1.3.6.1.4.1.1751.2.18.6.13.1.9 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| bridgeAtmPvcVccConnectionStatus | 1.3.6.1.4.1.1751.2.18.6.13.1.10 | ||
| Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. | |||
| OBJECT-TYPE | |||
| INTEGER | active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) | ||
| bridgeAtmPvcVccDualHomed | 1.3.6.1.4.1.1751.2.18.6.13.1.11 | ||
| Does this PVC need a backup Dual homing PVC. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| bridgeAtmPvcVccViB | 1.3.6.1.4.1.1751.2.18.6.13.1.12 | ||
| VI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| bridgeAtmPvcVccCnfrmTypeB2A | 1.3.6.1.4.1.1751.2.18.6.13.1.14 | ||
| The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. | |||
| OBJECT-TYPE | |||
| INTEGER | best-effort(1), one-bucket-notag-0plus1(2), two-bucket-notag-0plus1-0plus1(3), two-bucket-notag-0plus1-0(4), two-bucket-tag-0plus1-0(5), best-effort-tag(6) | ||
| bridgeAtmPvcVccVUNIB | 1.3.6.1.4.1.1751.2.18.6.13.1.15 | ||
| VUNI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| bridgeAtmPvcVccMfsB2A | 1.3.6.1.4.1.1751.2.18.6.13.1.16 | ||
| Maximum Frame Size for GFR traffic | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| bridgeAtmPvcVccConnFailureCauseA | 1.3.6.1.4.1.1751.2.18.6.13.1.17 | ||
| connestion status reason code | |||
| OBJECT-TYPE | |||
| ConnFailureCause | |||
| bridgeAtmPvcVccConnFailureCauseB | 1.3.6.1.4.1.1751.2.18.6.13.1.18 | ||
| connection status reason code | |||
| OBJECT-TYPE | |||
| AtmConnFailureCause | |||
| bridgeAtmPvcVccOamStatus | 1.3.6.1.4.1.1751.2.18.6.13.1.19 | ||
| Indicates the OAM monitoring status of side A. The 3 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore End-Seg-Pt: A side is both an end point and a segment point. | |||
| OBJECT-TYPE | |||
| INTEGER | unsupp(1), end-Pt(2), end-Seg-Pt(3) | ||
| bridgeAtmPvcVccTrafficShapingA2B | 1.3.6.1.4.1.1751.2.18.6.13.1.20 | ||
| Traffic Shaping Support in the A2B direction. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| cirEmAtmBkPvcVccTable | 1.3.6.1.4.1.1751.2.18.6.14 | ||
| This table is used to manage CES DHPVC backup pvc. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| CirEmAtmBkPvcVccEntry | |||
| cirEmAtmBkPvcVccEntry | 1.3.6.1.4.1.1751.2.18.6.14.1 | ||
| An entry in the CES DHPVC table. There is one entry in the table corresponding to each active row in the cirEmAtmPvcVccTable for which the cirEmAtmPvcVccDualHomed object takes the value 'yes.' | |||
| OBJECT-TYPE | |||
| CirEmAtmBkPvcVccEntry | |||
| cirEmAtmBkPvcVccIfB | 1.3.6.1.4.1.1751.2.18.6.14.1.1 | ||
| Interface index for side B, the atm side, of a backup circuit emulation-atm DHPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| cirEmAtmBkPvcVccVpiB | 1.3.6.1.4.1.1751.2.18.6.14.1.2 | ||
| VPI value for side B, the atm side, of a backup circuit emulation-atm DHPVC VCC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| cirEmAtmBkPvcVccVciB | 1.3.6.1.4.1.1751.2.18.6.14.1.3 | ||
| VCI value for side B, the atm side, of a backup circuit emulation-atm DHPVC VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| cirEmAtmBkPvcVccActivePvc | 1.3.6.1.4.1.1751.2.18.6.14.1.4 | ||
| Current active PVC. | |||
| OBJECT-TYPE | |||
| INTEGER | primary(1), backup(2), none(3) | ||
| cirEmAtmBkPvcVccAutoSwitch | 1.3.6.1.4.1.1751.2.18.6.14.1.5 | ||
| Auto switch back to primary link when primary link is recovered. | |||
| OBJECT-TYPE | |||
| INTEGER | yes(1), no(2) | ||
| cirEmAtmBkPvcVccRowStatus | 1.3.6.1.4.1.1751.2.18.6.14.1.6 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| cirEmAtmBkPvcVccViB | 1.3.6.1.4.1.1751.2.18.6.14.1.7 | ||
| VI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| cirEmAtmBkPvcVccVUNIB | 1.3.6.1.4.1.1751.2.18.6.14.1.8 | ||
| VUNI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| cirEmAtmBkPvcVccConnFailureCauseB | 1.3.6.1.4.1.1751.2.18.6.14.1.9 | ||
| connection status reason code | |||
| OBJECT-TYPE | |||
| AtmConnFailureCause | |||
| vbrAtmBkPvcVccTable | 1.3.6.1.4.1.1751.2.18.6.15 | ||
| This table is used to manage terminal emulation DHPVC backup pvc. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| VbrAtmBkPvcVccEntry | |||
| vbrAtmBkPvcVccEntry | 1.3.6.1.4.1.1751.2.18.6.15.1 | ||
| An entry in the terminal emulation DHPVC table. There is one entry in the table corresponding to each active row in the vbrAtmPvcVccTable for which the vbrAtmPvcVccDualHomed object takes the value 'yes'. | |||
| OBJECT-TYPE | |||
| VbrAtmBkPvcVccEntry | |||
| vbrAtmBkPvcVccIfB | 1.3.6.1.4.1.1751.2.18.6.15.1.1 | ||
| Interface index for side B, the atm side, of a backup terminal emulation-atm DHPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| vbrAtmBkPvcVccVpiB | 1.3.6.1.4.1.1751.2.18.6.15.1.2 | ||
| VPI value for side B, the atm side, of a backup terminal emulation-atm DHPVC VCC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| vbrAtmBkPvcVccVciB | 1.3.6.1.4.1.1751.2.18.6.15.1.3 | ||
| VCI value for side B, the atm side, of a backup terminal emulation-atm DHPVC VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| vbrAtmBkPvcVccActivePvc | 1.3.6.1.4.1.1751.2.18.6.15.1.4 | ||
| Current active PVC. | |||
| OBJECT-TYPE | |||
| INTEGER | primary(1), backup(2), none(3) | ||
| vbrAtmBkPvcVccAutoSwitch | 1.3.6.1.4.1.1751.2.18.6.15.1.5 | ||
| Auto switch back to primary link when primary link is recovered. | |||
| OBJECT-TYPE | |||
| INTEGER | yes(1), no(2) | ||
| vbrAtmBkPvcVccRowStatus | 1.3.6.1.4.1.1751.2.18.6.15.1.6 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| vbrAtmBkPvcVccViB | 1.3.6.1.4.1.1751.2.18.6.15.1.7 | ||
| VI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| vbrAtmBkPvcVccVUNIB | 1.3.6.1.4.1.1751.2.18.6.15.1.8 | ||
| VUNI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| vbrAtmBkPvcVccConnFailureCauseB | 1.3.6.1.4.1.1751.2.18.6.15.1.9 | ||
| connection status reason code | |||
| OBJECT-TYPE | |||
| AtmConnFailureCause | |||
| atmSpvcVccAddrTable | 1.3.6.1.4.1.1751.2.18.6.16 | ||
| Table of SPVC ATM network interface addresses. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmSpvcVccAddrEntry | |||
| atmSpvcVccAddrEntry | 1.3.6.1.4.1.1751.2.18.6.16.1 | ||
| Row definition of ATM SPVC address table. | |||
| OBJECT-TYPE | |||
| AtmSpvcVccAddrEntry | |||
| atmSpvcVccIfA | 1.3.6.1.4.1.1751.2.18.6.16.1.1 | ||
| Interface index for side A of an ATM SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmSpvcVccAtmPortAddr | 1.3.6.1.4.1.1751.2.18.6.16.1.2 | ||
| Local ATM port NSAP address. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1..20) | ||
| atmSpvcVccAddrRowStatus | 1.3.6.1.4.1.1751.2.18.6.16.1.3 | ||
| This is used to configure a NSAP address on the local port. Only when the address is configured can SPVC connections be established. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| atmSpvcVccTable | 1.3.6.1.4.1.1751.2.18.6.17 | ||
| Table of SPVC ATM virtual channel connections. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmSpvcVccEntry | |||
| atmSpvcVccEntry | 1.3.6.1.4.1.1751.2.18.6.17.1 | ||
| Row definition of ATM SPVC VCC connections. | |||
| OBJECT-TYPE | |||
| AtmSpvcVccEntry | |||
| atmSpvcVccVpiA | 1.3.6.1.4.1.1751.2.18.6.17.1.1 | ||
| VPI value for side A of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmSpvcVccVciA | 1.3.6.1.4.1.1751.2.18.6.17.1.2 | ||
| VCI value for side A of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmSpvcVccIfB | 1.3.6.1.4.1.1751.2.18.6.17.1.3 | ||
| Interface index for side B of an ATM SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmSpvcVccVpiB | 1.3.6.1.4.1.1751.2.18.6.17.1.4 | ||
| VPI value for side B of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmSpvcVccVciB | 1.3.6.1.4.1.1751.2.18.6.17.1.5 | ||
| VCI value for side B of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmSpvcVccServiceTypeA2B | 1.3.6.1.4.1.1751.2.18.6.17.1.6 | ||
| Service type, ATM port. | |||
| OBJECT-TYPE | |||
| INTEGER | ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), cbr4(7), cbr3(8), cbr2(9), cbr1(10) | ||
| atmSpvcVccSarTypeA2B | 1.3.6.1.4.1.1751.2.18.6.17.1.7 | ||
| SAR type used in ATM adaption, ATM port. | |||
| OBJECT-TYPE | |||
| INTEGER | aal5(1), aal3-4(2), aal2(3), aal1(4), null(5) | ||
| atmSpvcVccPeakCellRateA2B | 1.3.6.1.4.1.1751.2.18.6.17.1.8 | ||
| Peak cell rate - side A, ATM port, in cells per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccSusCellRateA2B | 1.3.6.1.4.1.1751.2.18.6.17.1.9 | ||
| Sustained cell rate - side A, ATM port, in cells per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccMaxBurstSizeA2B | 1.3.6.1.4.1.1751.2.18.6.17.1.10 | ||
| Maximum burst size - side A, ATM port, in cells per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccFrwdErrCorrectionA2B | 1.3.6.1.4.1.1751.2.18.6.17.1.11 | ||
| Forward error correction scheme, ATM port side. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), eighthRate(2), quarterRate(3), halfRate(4), autoHiQ(5), auto(6), autoLoQ(7) | ||
| atmSpvcVccServiceTypeB2A | 1.3.6.1.4.1.1751.2.18.6.17.1.12 | ||
| Service type, ATM trunk side. | |||
| OBJECT-TYPE | |||
| INTEGER | ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), cbr4(7), cbr3(8), cbr2(9), cbr1(10) | ||
| atmSpvcVccSarTypeB2A | 1.3.6.1.4.1.1751.2.18.6.17.1.13 | ||
| SAR type used in ATM adaption, ATM trunk side. | |||
| OBJECT-TYPE | |||
| INTEGER | aal5(1), aal3-4(2), aal2(3), aal1(4), null(5) | ||
| atmSpvcVccPeakCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.17.1.14 | ||
| Peak cell rate - side B, ATM trunk, in cells per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccSusCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.17.1.15 | ||
| Sustained cell rate - side B, ATM trunk, in cells per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccMaxBurstSizeB2A | 1.3.6.1.4.1.1751.2.18.6.17.1.16 | ||
| Maximum burst size - side A, ATM trunk, in cells per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccFrwdErrCorrectionB2A | 1.3.6.1.4.1.1751.2.18.6.17.1.17 | ||
| Forward error correction scheme, ATM trunk side. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), eighthRate(2), quarterRate(3), halfRate(4), autoHiQ(5), auto(6), autoLoQ(7) | ||
| atmSpvcVccFlow | 1.3.6.1.4.1.1751.2.18.6.17.1.18 | ||
| Type of flow, pointToMultipointA2B is for future support. | |||
| OBJECT-TYPE | |||
| INTEGER | duplex(1), simplexA2B(2), pointToMultipointA2B(3), simplexB2A(4) | ||
| atmSpvcVccType | 1.3.6.1.4.1.1751.2.18.6.17.1.19 | ||
| Type of connection. | |||
| OBJECT-TYPE | |||
| INTEGER | nonsecured(1), secured(2) | ||
| atmSpvcVccConnType | 1.3.6.1.4.1.1751.2.18.6.17.1.20 | ||
| The type of connection: activeSvc - attempt calls, whenever not established. passiveSvc - accept calls. | |||
| OBJECT-TYPE | |||
| INTEGER | activeSvc(1), passiveSvc(2) | ||
| atmSpvcVccLeafReference | 1.3.6.1.4.1.1751.2.18.6.17.1.21 | ||
| An arbitrary integer which serves to distinguish the mulitple leaves attached to a root of a point-to-multipoint SPVC. If point-to-point SPVC, the value should be 1. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| atmSpvcVccOperStatus | 1.3.6.1.4.1.1751.2.18.6.17.1.22 | ||
| The operation status of the connection: other - none of the types specified below. establishmentInProgress - connection is not operational, but call attempts are ongoing. connected - connection is currently operational. retriesExhausted - retry limit has been reached and call attempts have ceased. noAddressSupplied - no remote address has been configured, so no call attempts are initiated. lowerLayerDown - SPVC handler is not operational. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), establishmentInProgress(2), connected(3), retriesExhausted(4), noAddressSupplied(5), lowerLayerDown(6) | ||
| atmSpvcVccRowStatus | 1.3.6.1.4.1.1751.2.18.6.17.1.23 | ||
| Used to create and delete a soft PVC. When this object is set to 'active', an attempt is made to set up the soft PVC. When this object has the value 'active' and is set to another value, any setup or connection in-progress is released. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| atmSpvcVccViA | 1.3.6.1.4.1.1751.2.18.6.17.1.24 | ||
| VI to associate the Egress part of the B2A connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| atmSpvcVccViB | 1.3.6.1.4.1.1751.2.18.6.17.1.25 | ||
| VI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| atmSpvcVccTrafficShapingA2B | 1.3.6.1.4.1.1751.2.18.6.17.1.26 | ||
| Traffic Shaping Support in the A2B direction. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| atmSpvcVccTrafficShapingB2A | 1.3.6.1.4.1.1751.2.18.6.17.1.27 | ||
| Traffic Shaping Support in the B2A direction. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| atmSpvcVccActiveSvcTable | 1.3.6.1.4.1.1751.2.18.6.18 | ||
| The table used to manage active SVCs established across ATM networks between ATM entities. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmSpvcVccActiveSvcEntry | |||
| atmSpvcVccActiveSvcEntry | 1.3.6.1.4.1.1751.2.18.6.18.1 | ||
| An entry in the ATM active SVC table. There is one entry in the table corresponding to each active row in the atm SPVC VCC Table for which the atmSpvcVccConnType takes the value 'activeSvc'. | |||
| OBJECT-TYPE | |||
| AtmSpvcVccActiveSvcEntry | |||
| atmSpvcVccRemoteAtmPortAddr | 1.3.6.1.4.1.1751.2.18.6.18.1.1 | ||
| Remote ATM port NSAP address, not meaningful if passive type of connection. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1..20) | ||
| atmSpvcVccRemoteSelectType | 1.3.6.1.4.1.1751.2.18.6.18.1.2 | ||
| Indicates whether the remote VPI/VCI values are to be used at the destination. If 'any' is used, the destination switch will choose the VPI/VCI values. In such a case, once the SPVC is connected, the value of this object will change to 'required', such that the same VPI/VCI values will continue to be used even if the connection is torn down and re-established. If the value 'required' is specified, the values: atmSpvcVccRemoteVpi and atmSpvcVccRemoteVci, must be supplied and are used at the destination. | |||
| OBJECT-TYPE | |||
| INTEGER | required(1), any(2) | ||
| atmSpvcVccRemoteVpi | 1.3.6.1.4.1.1751.2.18.6.18.1.3 | ||
| VPI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. If atmSpvcVccRemoteSelectType is configured as 'any', then this value is not relevant. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmSpvcVccRemoteVci | 1.3.6.1.4.1.1751.2.18.6.18.1.4 | ||
| VCI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. If atmSpvcVccRemoteSelectType is configured as 'any', then this value is not relevant. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmSpvcVccRetryInterval | 1.3.6.1.4.1.1751.2.18.6.18.1.5 | ||
| The time to wait before attempting to establish the SVC after a previous failed call attempt. A value of 0 indicates retry will be attempted immediately. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..3600 | ||
| atmSpvcVccRetryLimit | 1.3.6.1.4.1.1751.2.18.6.18.1.6 | ||
| A maximum limit on how many retries should be attempted. A value of 0 indicates no limit. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmSpvcVccRestart | 1.3.6.1.4.1.1751.2.18.6.18.1.7 | ||
| The active SVC is released, if necessary, and a new setup procedure is begun if 'restart', otherwise, noop. | |||
| OBJECT-TYPE | |||
| INTEGER | restart(1), noop(2) | ||
| atmSpvcVccRetryFailure | 1.3.6.1.4.1.1751.2.18.6.18.1.8 | ||
| Indicates how many attempts to establish the connection have failed. It it reset whenever a connection is successfully established or the SVC is restarted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccReleaseCause | 1.3.6.1.4.1.1751.2.18.6.18.1.9 | ||
| CAUSE field value of the last RELEASE message received for this SVC. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..127 | ||
| atmSpvcVccReleaseDiag | 1.3.6.1.4.1.1751.2.18.6.18.1.10 | ||
| DIAGNOSTICS field value of the last RELEASE message received for this SVC. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..8) | ||
| cirEmAtmSpvcVccTable | 1.3.6.1.4.1.1751.2.18.6.19 | ||
| Table of Circuit Emulation to ATM Soft PVCs. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| CirEmAtmSpvcVccEntry | |||
| cirEmAtmSpvcVccEntry | 1.3.6.1.4.1.1751.2.18.6.19.1 | ||
| Row definition of circuit emulation to ATM SPVC connections. | |||
| OBJECT-TYPE | |||
| CirEmAtmSpvcVccEntry | |||
| cirEmAtmSpvcVccIfA | 1.3.6.1.4.1.1751.2.18.6.19.1.1 | ||
| Interface index for side A, the circuit emulation side, of a circuit emulation-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| cirEmAtmSpvcVccIfB | 1.3.6.1.4.1.1751.2.18.6.19.1.2 | ||
| Interface index for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| cirEmAtmSpvcVccVpiB | 1.3.6.1.4.1.1751.2.18.6.19.1.3 | ||
| VPI value for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| cirEmAtmSpvcVccVciB | 1.3.6.1.4.1.1751.2.18.6.19.1.4 | ||
| VCI value for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| cirEmAtmSpvcVccVoiceCompressionA2B | 1.3.6.1.4.1.1751.2.18.6.19.1.5 | ||
| Voice Compression Algorithm | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), g726-16k(2), g726-24k(3), g726-32k(4), g726-40k(5) | ||
| cirEmAtmSpvcVccSilenceDetectionA2B | 1.3.6.1.4.1.1751.2.18.6.19.1.6 | ||
| silence detection off/on | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| cirEmAtmSpvcVccEchoCancellationA2B | 1.3.6.1.4.1.1751.2.18.6.19.1.7 | ||
| Echo Cancellation Algorithm | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), g165-nearEnd(2), g168(3) | ||
| cirEmAtmSpvcVccCngToneDetectionA2B | 1.3.6.1.4.1.1751.2.18.6.19.1.8 | ||
| Calling Tone Detection Algorithm, one of the enum value, g726-32k(3) is obsoleted on 01Mar99 such that user would not be able to configure CE-ATM | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), bypass(2), g726-32k(3) | ||
| cirEmAtmSpvcVccCodingTranslationA2B | 1.3.6.1.4.1.1751.2.18.6.19.1.9 | ||
| Coding rule translation type. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), muLaw2muLaw(2), aLaw2aLaw(3), muLaw2aLaw(4), aLaw2muLaw(5) | ||
| cirEmAtmSpvcVccVoiceCompressionB2A | 1.3.6.1.4.1.1751.2.18.6.19.1.10 | ||
| Voice Compression Algorithm | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), g726-16k(2), g726-24k(3), g726-32k(4), g726-40k(5) | ||
| cirEmAtmSpvcVccSilenceDetectionB2A | 1.3.6.1.4.1.1751.2.18.6.19.1.11 | ||
| silence detection off/on | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| cirEmAtmSpvcVccEchoCancellationB2A | 1.3.6.1.4.1.1751.2.18.6.19.1.12 | ||
| Echo Cancellation Algorithm | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), g165-nearEnd(2), g168(3) | ||
| cirEmAtmSpvcVccCngToneDetectionB2A | 1.3.6.1.4.1.1751.2.18.6.19.1.13 | ||
| Calling Tone Detection Algorithm, one of the enum value, g726-32k(3) is obsoleted on 01Mar99 such that user would not be able to configure CE-ATM | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), bypass(2), g726-32k(3) | ||
| cirEmAtmSpvcVccCodingTranslationB2A | 1.3.6.1.4.1.1751.2.18.6.19.1.14 | ||
| Coding rule translation type. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), muLaw2muLaw(2), aLaw2aLaw(3), muLaw2aLaw(4), aLaw2muLaw(5) | ||
| cirEmAtmSpvcVccFlow | 1.3.6.1.4.1.1751.2.18.6.19.1.15 | ||
| Flow Type, pointToMultipointA2B and pointToMultipointB2A are for future support. | |||
| OBJECT-TYPE | |||
| INTEGER | duplex(1), simplexA2B(2), simplexB2A(3), pointToMultipointA2B(4), pointToMultipointB2A(5) | ||
| cirEmAtmSpvcVccServiceType | 1.3.6.1.4.1.1751.2.18.6.19.1.16 | ||
| service type | |||
| OBJECT-TYPE | |||
| INTEGER | cbr-1(1), cbr-2(2), cbr-3(3), cbr-4(4) | ||
| cirEmAtmSpvcVccConnType | 1.3.6.1.4.1.1751.2.18.6.19.1.17 | ||
| The type of connection: activeSvc - attempt calls, whenever not established; passiveSvc - accepts calls | |||
| OBJECT-TYPE | |||
| INTEGER | activeSvc(1), passiveSvc(2) | ||
| cirEmAtmSpvcVccCePortAddr | 1.3.6.1.4.1.1751.2.18.6.19.1.18 | ||
| local CES port nsap address | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1..20) | ||
| cirEmAtmSpvcVccOperStatus | 1.3.6.1.4.1.1751.2.18.6.19.1.19 | ||
| other - none of the types specified below; establishmentInProgress - connection is not operational, but call attempts are ongoing; connected - connection is currently operational; retriesExhausted - retry limit has been reached and call attempts have ceased; noAddressSupplied - no remote address has been configured, so no call attempts are initiated; lowerLayerDown - SPVC handler is not operational. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), establishmentInProgress(2), connected(3), retriesExhausted(4), noAddressSupplied(5), lowerLayerDown(6) | ||
| cirEmAtmSpvcVccRowStatus | 1.3.6.1.4.1.1751.2.18.6.19.1.20 | ||
| Used to create and delete a soft PVCC. When this object is set to 'active' an attempt is made to set up the soft PVCC. When this object has the value 'active' and is set to another value, any set-up or connection in-progess is released. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| cirEmAtmSpvcVccViB | 1.3.6.1.4.1.1751.2.18.6.19.1.21 | ||
| VI to associate the Egress part of the B2A connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| cirEmAtmSpvcVccActiveSvcTable | 1.3.6.1.4.1.1751.2.18.6.20 | ||
| The table used to manage active SVCs established across ATM networks between CES entities. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| CirEmAtmSpvcVccActiveSvcEntry | |||
| cirEmAtmSpvcVccActiveSvcEntry | 1.3.6.1.4.1.1751.2.18.6.20.1 | ||
| An entry in the CES active SVC table. There is one entry in the table corresponding to each active row in the cirEmAtmSpvcVccRowStatus for which the cirEmAtmSpvcVccConnType takes the value 'activeSvc'. | |||
| OBJECT-TYPE | |||
| CirEmAtmSpvcVccActiveSvcEntry | |||
| cirEmAtmSpvcVccRemoteCePortAddr | 1.3.6.1.4.1.1751.2.18.6.20.1.1 | ||
| The ATM address supporting the corresponding far end CES IWF process. If no address is supplied, no attempts to establish the active SVC are initiated. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1..20) | ||
| cirEmAtmSpvcVccRetryInterval | 1.3.6.1.4.1.1751.2.18.6.20.1.2 | ||
| The time to wait before attempting to establish the SVC after previous failed call attempt. 0 indicates retry will be attempted immediately. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..3600 | ||
| cirEmAtmSpvcVccRetryLimit | 1.3.6.1.4.1.1751.2.18.6.20.1.3 | ||
| A maximum limit on how many retries. 0 indicates no limit. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| cirEmAtmSpvcVccRestart | 1.3.6.1.4.1.1751.2.18.6.20.1.4 | ||
| restart, the active SVC is released if necessary and a new setup procedure is begun; or noop | |||
| OBJECT-TYPE | |||
| INTEGER | restart(1), noop(2) | ||
| cirEmAtmSpvcVccRetryFailure | 1.3.6.1.4.1.1751.2.18.6.20.1.5 | ||
| Indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the SVC is restarted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmSpvcVccReleaseCause | 1.3.6.1.4.1.1751.2.18.6.20.1.6 | ||
| CAUSE field value of the last RELEASE message received for this SVC. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..127 | ||
| cirEmAtmSpvcVccReleaseDiag | 1.3.6.1.4.1.1751.2.18.6.20.1.7 | ||
| DIAGNOSTICS field value of the last RELEASE message received for this SVC. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..8) | ||
| vbrAtmSpvcVccTable | 1.3.6.1.4.1.1751.2.18.6.21 | ||
| Table of SPVC atm virtual channel connections | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| VbrAtmSpvcVccEntry | |||
| vbrAtmSpvcVccEntry | 1.3.6.1.4.1.1751.2.18.6.21.1 | ||
| Row definition of atm SPVC VCC connections | |||
| OBJECT-TYPE | |||
| VbrAtmSpvcVccEntry | |||
| vbrAtmSpvcVccIfA | 1.3.6.1.4.1.1751.2.18.6.21.1.1 | ||
| Interface index for side A, the variable bit rate side, of a variable bit rate-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| vbrAtmSpvcVccIfB | 1.3.6.1.4.1.1751.2.18.6.21.1.2 | ||
| Interface index for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| vbrAtmSpvcVccVpiB | 1.3.6.1.4.1.1751.2.18.6.21.1.3 | ||
| VPI value for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| vbrAtmSpvcVccVciB | 1.3.6.1.4.1.1751.2.18.6.21.1.4 | ||
| VCI value for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| vbrAtmSpvcVccServiceType | 1.3.6.1.4.1.1751.2.18.6.21.1.5 | ||
| service type | |||
| OBJECT-TYPE | |||
| INTEGER | ubr(1), vbr-nrt1(2), vbr-nrt2(3), vbr-rt1(4), vbr-rt2(5), vbr-express(6) | ||
| vbrAtmSpvcVccPeakCellRateA2B | 1.3.6.1.4.1.1751.2.18.6.21.1.6 | ||
| peak cell rate - side A, in cell per second | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVccSusCellRateA2B | 1.3.6.1.4.1.1751.2.18.6.21.1.7 | ||
| sustained rate - side A, in cell per second | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVccMaxBurstSizeA2B | 1.3.6.1.4.1.1751.2.18.6.21.1.8 | ||
| maximum burst size - side A, in cells | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVccPeakCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.21.1.9 | ||
| peak rate - side B, ATM trunk, in cell per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVccSusCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.21.1.10 | ||
| sustained rate - side B, ATM trunk, in cell per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVccMaxBurstSizeB2A | 1.3.6.1.4.1.1751.2.18.6.21.1.11 | ||
| maximum burst size - side B, ATM trunk, in cells. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVccFlow | 1.3.6.1.4.1.1751.2.18.6.21.1.12 | ||
| type of flow | |||
| OBJECT-TYPE | |||
| INTEGER | duplex(1), simplexA2B(2), simplexB2A(3) | ||
| vbrAtmSpvcVccConnType | 1.3.6.1.4.1.1751.2.18.6.21.1.13 | ||
| The type of connection: activeSvc - attempt calls, whenever not established; passiveSvc - accepts calls | |||
| OBJECT-TYPE | |||
| INTEGER | activeSvc(1), passiveSvc(2) | ||
| vbrAtmSpvcVccVbrPortAddr | 1.3.6.1.4.1.1751.2.18.6.21.1.14 | ||
| local Vbr port nsap address | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1..20) | ||
| vbrAtmSpvcVccOperStatus | 1.3.6.1.4.1.1751.2.18.6.21.1.15 | ||
| other - none of the types specified below; establishmentInProgress - connection is not operational, but call attempts are ongoing; connected - connection is currently operational; retriesExhausted - retry limit has been reached and call attempts have ceased; noAddressSupplied - no remote address has been configured, so no call attempts are initiated; lowerLayerDown - SPVC handler is not operational. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), establishmentInProgress(2), connected(3), retriesExhausted(4), noAddressSupplied(5), lowerLayerDown(6) | ||
| vbrAtmSpvcVccRowStatus | 1.3.6.1.4.1.1751.2.18.6.21.1.16 | ||
| Used to create and delete a soft PVCC. When this object is set to 'active' an attempt is made to set up the soft PVCC. When this object has the value 'active' and is set to another value, any set-up or connection in-progess is released. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| vbrAtmSpvcVccViB | 1.3.6.1.4.1.1751.2.18.6.21.1.17 | ||
| VI to associate the Egress part of the B2A connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| vbrAtmSpvcVccTrafficShapingA2B | 1.3.6.1.4.1.1751.2.18.6.21.1.18 | ||
| Traffic Shaping Support in the A2B direction. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| vbrAtmSpvcVccActiveSvcTable | 1.3.6.1.4.1.1751.2.18.6.22 | ||
| The table used to manage active SVCs established across ATM networks between ATM entities. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| VbrAtmSpvcVccActiveSvcEntry | |||
| vbrAtmSpvcVccActiveSvcEntry | 1.3.6.1.4.1.1751.2.18.6.22.1 | ||
| An entry in the Terminal Emulation ATM active SVC table. There is one entry in the table corresponding to each active row in the vbrAtmSpvcVccTable for which the vbrAtmSpvcVccConnType takes the value 'activeSvc'. | |||
| OBJECT-TYPE | |||
| VbrAtmSpvcVccActiveSvcEntry | |||
| vbrAtmSpvcVccRemoteVbrPortAddr | 1.3.6.1.4.1.1751.2.18.6.22.1.1 | ||
| remote VBR port nsap address implemening IWF, not meaningful if passive type of connection | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1..20) | ||
| vbrAtmSpvcVccRetryInterval | 1.3.6.1.4.1.1751.2.18.6.22.1.2 | ||
| the time to wait before attempting to establish the SVC after previous failed call attempt. 0 indicates retry will be attempted immediately. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..3600 | ||
| vbrAtmSpvcVccRetryLimit | 1.3.6.1.4.1.1751.2.18.6.22.1.3 | ||
| a maximum limit on how many retries. 0 indicates no limit. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| vbrAtmSpvcVccRestart | 1.3.6.1.4.1.1751.2.18.6.22.1.4 | ||
| restart, the active SVC is released if necessary and a new setup procedure is begun; or noop | |||
| OBJECT-TYPE | |||
| INTEGER | restart(1), noop(2) | ||
| vbrAtmSpvcVccRetryFailure | 1.3.6.1.4.1.1751.2.18.6.22.1.5 | ||
| indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the SVC is restarted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVccReleaseCause | 1.3.6.1.4.1.1751.2.18.6.22.1.6 | ||
| CAUSE field value of the last RELEASE message received for this SVC | |||
| OBJECT-TYPE | |||
| INTEGER | 1..127 | ||
| vbrAtmSpvcVccReleaseDiag | 1.3.6.1.4.1.1751.2.18.6.22.1.7 | ||
| DIAGNOSTICS field value of the last RELEASE message received for this SVC | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..8) | ||
| atmSpvcVccRlsTable | 1.3.6.1.4.1.1751.2.18.6.23 | ||
| This table is an extension of atmSpvcVccTable and is used to release a ATM-ATM SPVC connection without deleting the configured data. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmSpvcVccRlsEntry | |||
| atmSpvcVccRlsEntry | 1.3.6.1.4.1.1751.2.18.6.23.1 | ||
| Row definition of CES SPVC release table. This entry is created whenever an entry is created in atmSpvcVccTable. | |||
| OBJECT-TYPE | |||
| AtmSpvcVccRlsEntry | |||
| atmSpvcVccRelease | 1.3.6.1.4.1.1751.2.18.6.23.1.1 | ||
| Release the connnection established on the endpoint and if the endpoint is Active, do not retry. | |||
| OBJECT-TYPE | |||
| INTEGER | release(1), noop(2) | ||
| cirEmAtmSpvcVccRlsTable | 1.3.6.1.4.1.1751.2.18.6.24 | ||
| This table is an extension of cirEmAtmSpvcVccTable and is used to release a TE-ATM SPVC connection without deleting the configured data. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| CirEmAtmSpvcVccRlsEntry | |||
| cirEmAtmSpvcVccRlsEntry | 1.3.6.1.4.1.1751.2.18.6.24.1 | ||
| Row definition of CES SPVC release table. This entry is created whenever an entry is created in cirEmAtmSpvcVccTable. | |||
| OBJECT-TYPE | |||
| CirEmAtmSpvcVccRlsEntry | |||
| cirEmAtmSpvcVccRelease | 1.3.6.1.4.1.1751.2.18.6.24.1.1 | ||
| Release the connnection established on the endpoint and if the endpoint is Active, do not retry. | |||
| OBJECT-TYPE | |||
| INTEGER | release(1), noop(2) | ||
| vbrAtmSpvcVccRlsTable | 1.3.6.1.4.1.1751.2.18.6.25 | ||
| This table is an extension of vbrAtmSpvcVccTable and is used to release a TE-ATM SPVC connection without deleting the configured data. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| VbrAtmSpvcVccRlsEntry | |||
| vbrAtmSpvcVccRlsEntry | 1.3.6.1.4.1.1751.2.18.6.25.1 | ||
| Row definition of TE SPVC release table. This entry is created whenever an entry is created in vbrAtmSpvcVccTable. | |||
| OBJECT-TYPE | |||
| VbrAtmSpvcVccRlsEntry | |||
| vbrAtmSpvcVccRelease | 1.3.6.1.4.1.1751.2.18.6.25.1.1 | ||
| Release the connnection established on the endpoint and if the endpoint is Active, do not retry. | |||
| OBJECT-TYPE | |||
| INTEGER | release(1), noop(2) | ||
| frAtmBkPvcVccTable | 1.3.6.1.4.1.1751.2.18.6.26 | ||
| This table is used to manage frame relay DHPVC backup pvc. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| FrAtmBkPvcVccEntry | |||
| frAtmBkPvcVccEntry | 1.3.6.1.4.1.1751.2.18.6.26.1 | ||
| An entry in the frame relay DHPVC table. There is one entry in the table corresponding to each active row in the frAtmPvcVccTable for which the frAtmPvcVccDualHomed object takes the value 'yes.' | |||
| OBJECT-TYPE | |||
| FrAtmBkPvcVccEntry | |||
| frAtmBkPvcVccIfB | 1.3.6.1.4.1.1751.2.18.6.26.1.1 | ||
| Interface index for side B, the atm side, of a backup frame relay-atm DHPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| frAtmBkPvcVccVpiB | 1.3.6.1.4.1.1751.2.18.6.26.1.2 | ||
| VPI value for side B, the atm side, of a backup frame relay-atm DHPVC VCC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| frAtmBkPvcVccVciB | 1.3.6.1.4.1.1751.2.18.6.26.1.3 | ||
| VCI value for side B, the atm side, of a backup frame relay-atm DHPVC VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| frAtmBkPvcVccActivePvc | 1.3.6.1.4.1.1751.2.18.6.26.1.4 | ||
| Current active PVC. | |||
| OBJECT-TYPE | |||
| INTEGER | primary(1), backup(2), none(3) | ||
| frAtmBkPvcVccAutoSwitch | 1.3.6.1.4.1.1751.2.18.6.26.1.5 | ||
| Auto switch back to primary link when primary link is recovered. | |||
| OBJECT-TYPE | |||
| INTEGER | yes(1), no(2) | ||
| frAtmBkPvcVccRowStatus | 1.3.6.1.4.1.1751.2.18.6.26.1.6 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| frAtmBkPvcVccViB | 1.3.6.1.4.1.1751.2.18.6.26.1.7 | ||
| VI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| frAtmBkPvcVccVUNIB | 1.3.6.1.4.1.1751.2.18.6.26.1.8 | ||
| VUNI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| frAtmBkPvcVccConnFailureCauseB | 1.3.6.1.4.1.1751.2.18.6.26.1.9 | ||
| connection status reason code | |||
| OBJECT-TYPE | |||
| AtmConnFailureCause | |||
| atmBkPvcVccTable | 1.3.6.1.4.1.1751.2.18.6.27 | ||
| This table is used to manage ATM to ATM DHPVC backup pvc. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmBkPvcVccEntry | |||
| atmBkPvcVccEntry | 1.3.6.1.4.1.1751.2.18.6.27.1 | ||
| An entry in the ATM to ATM DHPVC table. There is one entry in the table corresponding to each active row in the atmPvcVccTable for which the atmPvcVccDualHomed object takes the value 'yes'. | |||
| OBJECT-TYPE | |||
| AtmBkPvcVccEntry | |||
| atmBkPvcVccIfB | 1.3.6.1.4.1.1751.2.18.6.27.1.1 | ||
| Interface index for side B, the atm side, of a backup ATM-to-ATM DHPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmBkPvcVccVpiB | 1.3.6.1.4.1.1751.2.18.6.27.1.2 | ||
| VPI value for side B, the atm side, of a backup ATM-to-ATM DHPVC VCC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmBkPvcVccVciB | 1.3.6.1.4.1.1751.2.18.6.27.1.3 | ||
| VCI value for side B, the atm side, of a backup ATM-to-ATM DHPVC VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmBkPvcVccActivePvc | 1.3.6.1.4.1.1751.2.18.6.27.1.4 | ||
| Current active PVC. | |||
| OBJECT-TYPE | |||
| INTEGER | primary(1), backup(2), none(3) | ||
| atmBkPvcVccAutoSwitch | 1.3.6.1.4.1.1751.2.18.6.27.1.5 | ||
| Auto switch back to primary link when primary link is recovered. | |||
| OBJECT-TYPE | |||
| INTEGER | yes(1), no(2) | ||
| atmBkPvcVccRowStatus | 1.3.6.1.4.1.1751.2.18.6.27.1.6 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| atmBkPvcVccViB | 1.3.6.1.4.1.1751.2.18.6.27.1.7 | ||
| VI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| atmBkPvcVccVUNIB | 1.3.6.1.4.1.1751.2.18.6.27.1.8 | ||
| VUNI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmBkPvcVccConnFailureCauseB | 1.3.6.1.4.1.1751.2.18.6.27.1.9 | ||
| connection status reason code | |||
| OBJECT-TYPE | |||
| AtmConnFailureCause | |||
| atmBkPvcVpcTable | 1.3.6.1.4.1.1751.2.18.6.28 | ||
| This table is used to manage ATM to ATM DHPVC backup pvc. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmBkPvcVpcEntry | |||
| atmBkPvcVpcEntry | 1.3.6.1.4.1.1751.2.18.6.28.1 | ||
| An entry in the ATM to ATM DHPVC table. There is one entry in the table corresponding to each active row in the atmPvcVpcTable for which the atmPvcVpcDualHomed object takes the value 'yes'. | |||
| OBJECT-TYPE | |||
| AtmBkPvcVpcEntry | |||
| atmBkPvcVpcIfB | 1.3.6.1.4.1.1751.2.18.6.28.1.1 | ||
| Interface index for side B of an ATM-to-ATM PVC VPC backup DHPVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmBkPvcVpcVpiB | 1.3.6.1.4.1.1751.2.18.6.28.1.2 | ||
| VPI value for side B of an ATM-to-ATM PVC VPC backup DHPVC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmBkPvcVpcActivePvc | 1.3.6.1.4.1.1751.2.18.6.28.1.3 | ||
| Current active PVC. | |||
| OBJECT-TYPE | |||
| INTEGER | primary(1), backup(2), none(3) | ||
| atmBkPvcVpcAutoSwitch | 1.3.6.1.4.1.1751.2.18.6.28.1.4 | ||
| Auto switch back to primary link when primary link is recovered. | |||
| OBJECT-TYPE | |||
| INTEGER | yes(1), no(2) | ||
| atmBkPvcVpcRowStatus | 1.3.6.1.4.1.1751.2.18.6.28.1.5 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| atmBkPvcVpcViB | 1.3.6.1.4.1.1751.2.18.6.28.1.6 | ||
| VI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| atmBkPvcVpcVUNIB | 1.3.6.1.4.1.1751.2.18.6.28.1.7 | ||
| VUNI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmBkPvcVpcConnFailureCauseB | 1.3.6.1.4.1.1751.2.18.6.28.1.8 | ||
| connection status reason code | |||
| OBJECT-TYPE | |||
| AtmConnFailureCause | |||
| bridgeAtmBkPvcVccTable | 1.3.6.1.4.1.1751.2.18.6.29 | ||
| This table is used to manage bridge to atm DHPVC backup pvc. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| BridgeAtmBkPvcVccEntry | |||
| bridgeAtmBkPvcVccEntry | 1.3.6.1.4.1.1751.2.18.6.29.1 | ||
| An entry in the bridge to atm DHPVC table. There is one entry in the table corresponding to each active row in the bridgeAtmPvcVccTable for which the bridgeAtmPvcVccDualHomed object takes the value 'yes'. | |||
| OBJECT-TYPE | |||
| BridgeAtmBkPvcVccEntry | |||
| bridgeAtmBkPvcVccIfB | 1.3.6.1.4.1.1751.2.18.6.29.1.1 | ||
| Interface index for side B, the atm side, of a backup bridge-atm DHPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| bridgeAtmBkPvcVccVpiB | 1.3.6.1.4.1.1751.2.18.6.29.1.2 | ||
| VPI value for side B, the atm side, of a backup bridge-atm DHPVC VCC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| bridgeAtmBkPvcVccVciB | 1.3.6.1.4.1.1751.2.18.6.29.1.3 | ||
| VCI value for side B, the atm side, of a backup bridge-atm DHPVC VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| bridgeAtmBkPvcVccActivePvc | 1.3.6.1.4.1.1751.2.18.6.29.1.4 | ||
| Current active PVC. | |||
| OBJECT-TYPE | |||
| INTEGER | primary(1), backup(2), none(3) | ||
| bridgeAtmBkPvcVccAutoSwitch | 1.3.6.1.4.1.1751.2.18.6.29.1.5 | ||
| Auto switch back to primary link when primary link is recovered. | |||
| OBJECT-TYPE | |||
| INTEGER | yes(1), no(2) | ||
| bridgeAtmBkPvcVccRowStatus | 1.3.6.1.4.1.1751.2.18.6.29.1.6 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| bridgeAtmBkPvcVccViB | 1.3.6.1.4.1.1751.2.18.6.29.1.7 | ||
| VI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| bridgeAtmBkPvcVccVUNIB | 1.3.6.1.4.1.1751.2.18.6.29.1.8 | ||
| VUNI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| bridgeAtmBkPvcVccConnFailureCauseB | 1.3.6.1.4.1.1751.2.18.6.29.1.9 | ||
| connection status reason code | |||
| OBJECT-TYPE | |||
| AtmConnFailureCause | |||
| ipAtmBkAppPvcVccTable | 1.3.6.1.4.1.1751.2.18.6.30 | ||
| This table is used to manage in-band management to atm DHPVC backup pvc. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| IpAtmBkAppPvcVccEntry | |||
| ipAtmBkAppPvcVccEntry | 1.3.6.1.4.1.1751.2.18.6.30.1 | ||
| An entry in the in-band management to atm DHPVC table. There is one entry in the table corresponding to each active row in the ipAtmAppPvcVccTable for which the ipAtmAppPvcVccDualHomed object takes the value 'yes'. | |||
| OBJECT-TYPE | |||
| IpAtmBkAppPvcVccEntry | |||
| ipAtmBkAppPvcVccIfB | 1.3.6.1.4.1.1751.2.18.6.30.1.1 | ||
| Interface index for side B, the atm side, of a backup in-band management-atm DHPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| ipAtmBkAppPvcVccVpiB | 1.3.6.1.4.1.1751.2.18.6.30.1.2 | ||
| VPI value for side B, the atm side, of a backup in-band management-atm DHPVC VCC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| ipAtmBkAppPvcVccVciB | 1.3.6.1.4.1.1751.2.18.6.30.1.3 | ||
| VCI value for side B, the atm side, of a backup in-band management-atm DHPVC VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| ipAtmBkAppPvcVccActivePvc | 1.3.6.1.4.1.1751.2.18.6.30.1.4 | ||
| Current active PVC. | |||
| OBJECT-TYPE | |||
| INTEGER | primary(1), backup(2), none(3) | ||
| ipAtmBkAppPvcVccAutoSwitch | 1.3.6.1.4.1.1751.2.18.6.30.1.5 | ||
| Auto switch back to primary link when primary link is recovered. | |||
| OBJECT-TYPE | |||
| INTEGER | yes(1), no(2) | ||
| ipAtmBkAppPvcVccRowStatus | 1.3.6.1.4.1.1751.2.18.6.30.1.6 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| ipAtmBkAppPvcVccViB | 1.3.6.1.4.1.1751.2.18.6.30.1.7 | ||
| VI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| ipAtmBkAppPvcVccVUNIB | 1.3.6.1.4.1.1751.2.18.6.30.1.8 | ||
| VUNI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| ipAtmBkAppPvcVccConnFailureCauseB | 1.3.6.1.4.1.1751.2.18.6.30.1.9 | ||
| connection status reason code | |||
| OBJECT-TYPE | |||
| AtmConnFailureCause | |||
| spvcAddrTable | 1.3.6.1.4.1.1751.2.18.6.31 | ||
| Table of SPVC network interface addresses. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SpvcAddrEntry | |||
| spvcAddrEntry | 1.3.6.1.4.1.1751.2.18.6.31.1 | ||
| Row definition of SPVC address table. | |||
| OBJECT-TYPE | |||
| SpvcAddrEntry | |||
| spvcAddrIfA | 1.3.6.1.4.1.1751.2.18.6.31.1.1 | ||
| Interface index for side A of an SPVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| spvcAddrLocalPortAddr | 1.3.6.1.4.1.1751.2.18.6.31.1.2 | ||
| Local port NSAP address. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1..20) | ||
| spvcAddrRowStatus | 1.3.6.1.4.1.1751.2.18.6.31.1.3 | ||
| This is used to configure a NSAP address on the local port. Only when the address is configured can SPVC connections be established. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| frAtmSpvcVccTable | 1.3.6.1.4.1.1751.2.18.6.32 | ||
| Table of frame relay to ATM IWF connections | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| FrAtmSpvcVccEntry | |||
| frAtmSpvcVccEntry | 1.3.6.1.4.1.1751.2.18.6.32.1 | ||
| Row definition of frame relay to ATM IWF connections | |||
| OBJECT-TYPE | |||
| FrAtmSpvcVccEntry | |||
| frAtmSpvcVccDlciA | 1.3.6.1.4.1.1751.2.18.6.32.1.1 | ||
| DLCI value for side A, the frame relay side, of a frame relay-atm SPVC VCC connection. Valid range is a number between 0 and 1023. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1023 | ||
| frAtmSpvcVccIfB | 1.3.6.1.4.1.1751.2.18.6.32.1.2 | ||
| Interface index for side B, the atm side, of a frame relay-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| frAtmSpvcVccVpiB | 1.3.6.1.4.1.1751.2.18.6.32.1.3 | ||
| VPI value for side B, the atm side, of a frame relay-atm SPVC VCC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| frAtmSpvcVccVciB | 1.3.6.1.4.1.1751.2.18.6.32.1.4 | ||
| VCI value for side B, the atm side, of a frame relay-atm SPVC VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| frAtmSpvcVccMaxFrameSizeIn | 1.3.6.1.4.1.1751.2.18.6.32.1.5 | ||
| The value of this object is the size in octets of the largest frame relay information field for this SPVC in the ingress direction (out of the frame relay UNI). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccBcIn | 1.3.6.1.4.1.1751.2.18.6.32.1.6 | ||
| The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this SPVC in the ingress direction (into the frame relay UNI). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccBeIn | 1.3.6.1.4.1.1751.2.18.6.32.1.7 | ||
| The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this SPVC in the ingress direction (into the frame relay UNI). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccCirIn | 1.3.6.1.4.1.1751.2.18.6.32.1.8 | ||
| The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this SPVC in the ingress direction (into the frame relay UNI). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccMaxFrameSizeOut | 1.3.6.1.4.1.1751.2.18.6.32.1.9 | ||
| The value of this object is the size in octets of the largest frame relay information field for this SPVC in the egress direction (out of the frame relay UNI). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccBcOut | 1.3.6.1.4.1.1751.2.18.6.32.1.10 | ||
| The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this SPVC in the egress direction (into the frame relay UNI). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccBeOut | 1.3.6.1.4.1.1751.2.18.6.32.1.11 | ||
| The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this SPVC in the egress direction (into the frame relay UNI) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccCirOut | 1.3.6.1.4.1.1751.2.18.6.32.1.12 | ||
| The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this SPVC in the egress direction (into the frame relay UNI). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccServiceType | 1.3.6.1.4.1.1751.2.18.6.32.1.13 | ||
| service type, Frame relay traffic is carried by VBR type of service only. | |||
| OBJECT-TYPE | |||
| INTEGER | ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6) | ||
| frAtmSpvcVccFlow | 1.3.6.1.4.1.1751.2.18.6.32.1.14 | ||
| Flow Type | |||
| OBJECT-TYPE | |||
| INTEGER | duplex(1), simplexA2B(2), simplexB2A(3) | ||
| frAtmSpvcVccTimeLenIn | 1.3.6.1.4.1.1751.2.18.6.32.1.15 | ||
| The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds. | |||
| OBJECT-TYPE | |||
| INTEGER | 64..4000 | ||
| frAtmSpvcVccTimeLenOut | 1.3.6.1.4.1.1751.2.18.6.32.1.16 | ||
| The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds. | |||
| OBJECT-TYPE | |||
| INTEGER | 64..4000 | ||
| frAtmSpvcVccPeakCellRateA2B | 1.3.6.1.4.1.1751.2.18.6.32.1.17 | ||
| Peak cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccSusCellRateA2B | 1.3.6.1.4.1.1751.2.18.6.32.1.18 | ||
| Sustained cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccMaxBurstSizeA2B | 1.3.6.1.4.1.1751.2.18.6.32.1.19 | ||
| Maximum burst size - side A, in cells, this will reflect the frame relay parameters in atm terms. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccPeakCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.32.1.20 | ||
| Peak cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccSusCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.32.1.21 | ||
| Sustained cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccMaxBurstSizeB2A | 1.3.6.1.4.1.1751.2.18.6.32.1.22 | ||
| Maximum burst size - side B, in cells, this will reflect the frame relay parameters in atm terms. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccInterWorkingFunc | 1.3.6.1.4.1.1751.2.18.6.32.1.23 | ||
| InterWorking function. | |||
| OBJECT-TYPE | |||
| INTEGER | frf8-Transl(1), frf8-Pass(2), frf5(3) | ||
| frAtmSpvcVccConnType | 1.3.6.1.4.1.1751.2.18.6.32.1.24 | ||
| The type of connection: activeSvc - attempt calls, whenever not established; passiveSvc - accepts calls | |||
| OBJECT-TYPE | |||
| INTEGER | activeSvc(1), passiveSvc(2) | ||
| frAtmSpvcVccOperStatus | 1.3.6.1.4.1.1751.2.18.6.32.1.25 | ||
| other - none of the types specified below; establishmentInProgress - connection is not operational, but call attempts are ongoing; connected - connection is currently operational; retriesExhausted - retry limit has been reached and call attempts have ceased; noAddressSupplied - no remote address has been configured, so no call attempts are initiated; lowerLayerDown - SPVC handler is not operational. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), establishmentInProgress(2), connected(3), retriesExhausted(4), noAddressSupplied(5), lowerLayerDown(6), waitingForCall(7), waitingForRetryTimer(8) | ||
| frAtmSpvcVccRowStatus | 1.3.6.1.4.1.1751.2.18.6.32.1.26 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| frAtmSpvcVccRemoteFrPortAddr | 1.3.6.1.4.1.1751.2.18.6.32.1.27 | ||
| The ATM address supporting the corresponding far end FR IWF process. If no address is supplied, no attempts to establish the active SVC are initiated. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1..20) | ||
| frAtmSpvcVccRemoteSelectType | 1.3.6.1.4.1.1751.2.18.6.32.1.28 | ||
| Indicates whether the remote DLCI/VPI/VCI values are to be used at the destination. If 'any' is used, the destination switch will choose the DLCI/VPI/VCI values. In such a case, once the SPVC is connected, the value of this object will change to 'required', such that the same DLCI/VPI/VCI values will continue to be used even if the connection is torn down and re-established. If the value 'required' is specified, the values: frAtmSpvcVccRemoteDlci or frAtmSpvcVccRemoteVpi and frAtmSpvcVccRemoteVci, must be supplied and are used at the destination. | |||
| OBJECT-TYPE | |||
| INTEGER | required(1), any(2) | ||
| frAtmSpvcVccRemoteDlci | 1.3.6.1.4.1.1751.2.18.6.32.1.29 | ||
| DLCI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. If frAtmSpvcVccRemoteSelectType is configured as 'any', then this value is not relevant. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| frAtmSpvcVccRemoteVpi | 1.3.6.1.4.1.1751.2.18.6.32.1.30 | ||
| VPI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. If frAtmSpvcVccRemoteSelectType is configured as 'any', then this value is not relevant. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| frAtmSpvcVccRemoteVci | 1.3.6.1.4.1.1751.2.18.6.32.1.31 | ||
| VCI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. If frAtmSpvcVccRemoteSelectType is configured as 'any', then this value is not relevant. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| frAtmSpvcVccRetryInterval | 1.3.6.1.4.1.1751.2.18.6.32.1.32 | ||
| The time to wait before attempting to establish the SVC after previous failed call attempt. 0 indicates retry will be attempted immediately. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..3600 | ||
| frAtmSpvcVccRetryLimit | 1.3.6.1.4.1.1751.2.18.6.32.1.33 | ||
| A maximum limit on how many retries. 0 indicates no limit. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| frAtmSpvcVccRestart | 1.3.6.1.4.1.1751.2.18.6.32.1.34 | ||
| restart, the active SVC is released if necessary and a new setup procedure is begun; or noop | |||
| OBJECT-TYPE | |||
| INTEGER | restart(1), noop(2) | ||
| frAtmSpvcVccRetryFailure | 1.3.6.1.4.1.1751.2.18.6.32.1.35 | ||
| Indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the SVC is restarted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccReleaseCause | 1.3.6.1.4.1.1751.2.18.6.32.1.36 | ||
| CAUSE field value of the last RELEASE message received for this SVC. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..127 | ||
| frAtmSpvcVccReleaseDiag | 1.3.6.1.4.1.1751.2.18.6.32.1.37 | ||
| DIAGNOSTICS field value of the last RELEASE message received for this SVC. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..8) | ||
| frAtmSpvcVccRelease | 1.3.6.1.4.1.1751.2.18.6.32.1.38 | ||
| Release the connnection established on the endpoint and if the endpoint is Active, do not retry. | |||
| OBJECT-TYPE | |||
| INTEGER | release(1), noop(2) | ||
| frAtmSpvcVccStatsCellsEncodedHiA | 1.3.6.1.4.1.1751.2.18.6.32.1.39 | ||
| Cells encoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccStatsCellsEncodedLoA | 1.3.6.1.4.1.1751.2.18.6.32.1.40 | ||
| Cells encoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccStatsCellsDecodedHiA | 1.3.6.1.4.1.1751.2.18.6.32.1.41 | ||
| Cells decoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccStatsCellsDecodedLoA | 1.3.6.1.4.1.1751.2.18.6.32.1.42 | ||
| Cells decoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccStatsInCellCountHiB | 1.3.6.1.4.1.1751.2.18.6.32.1.43 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccStatsInCellCountLoB | 1.3.6.1.4.1.1751.2.18.6.32.1.44 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccStatsOutCellCountHiB | 1.3.6.1.4.1.1751.2.18.6.32.1.45 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccStatsOutCellCountLoB | 1.3.6.1.4.1.1751.2.18.6.32.1.46 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccStatsTimer | 1.3.6.1.4.1.1751.2.18.6.32.1.47 | ||
| Number of seconds stats have been collecting | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccStatsFramesDroppedA | 1.3.6.1.4.1.1751.2.18.6.32.1.48 | ||
| Number of frames dropped for a given DLCI for A2B direction, only applicable to the input side. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccStatsOdometerCellsEncodedHiA | 1.3.6.1.4.1.1751.2.18.6.32.1.49 | ||
| Cells encoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccStatsOdometerCellsEncodedLoA | 1.3.6.1.4.1.1751.2.18.6.32.1.50 | ||
| Cells encoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccStatsOdometerCellsDecodedHiA | 1.3.6.1.4.1.1751.2.18.6.32.1.51 | ||
| Cells decoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccStatsOdometerCellsDecodedLoA | 1.3.6.1.4.1.1751.2.18.6.32.1.52 | ||
| Cells decoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccStatsInOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.6.32.1.53 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccStatsInOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.6.32.1.54 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccStatsOutOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.6.32.1.55 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccStatsOutOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.6.32.1.56 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccStatsOdometerTimer | 1.3.6.1.4.1.1751.2.18.6.32.1.57 | ||
| Number of seconds since odometer was reset. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccStatsOdometerReset | 1.3.6.1.4.1.1751.2.18.6.32.1.58 | ||
| Odometer reset button. | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| frAtmSpvcVccStatsAal5ErrFramesA | 1.3.6.1.4.1.1751.2.18.6.32.1.59 | ||
| Number of Aal5 Errored Frames, which are not dropped due to UPC in A2B dir, only applicable to Input Side | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccStatsFramesTaggedA | 1.3.6.1.4.1.1751.2.18.6.32.1.60 | ||
| Number of Frames tagged due to UPC in A2B dir, only applicable to Input Side | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccStatsCellsDroppedB | 1.3.6.1.4.1.1751.2.18.6.32.1.61 | ||
| Cells Dropped on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccStatsCellsTaggedB | 1.3.6.1.4.1.1751.2.18.6.32.1.62 | ||
| Cells Tagged on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmSpvcVccVUNIB | 1.3.6.1.4.1.1751.2.18.6.32.1.63 | ||
| VUNI to associate the Egress part of the B2A connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| frAtmSpvcVccTrafficShapingA2B | 1.3.6.1.4.1.1751.2.18.6.32.1.64 | ||
| Traffic Shaping Support in the A2B direction. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| frAtmSpvcVccPriority | 1.3.6.1.4.1.1751.2.18.6.32.1.65 | ||
| Priority of SPVC - priority-1 being highest priority . | |||
| OBJECT-TYPE | |||
| INTEGER | priority-1(1), priority-2(2), priority-3(3), priority-4(4) | ||
| atmAtmSpvcVccTable | 1.3.6.1.4.1.1751.2.18.6.33 | ||
| Table of SPVC ATM virtual channel connections. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmAtmSpvcVccEntry | |||
| atmAtmSpvcVccEntry | 1.3.6.1.4.1.1751.2.18.6.33.1 | ||
| Row definition of ATM SPVC VCC connections. | |||
| OBJECT-TYPE | |||
| AtmAtmSpvcVccEntry | |||
| atmAtmSpvcVccVpiA | 1.3.6.1.4.1.1751.2.18.6.33.1.1 | ||
| VPI value for side A of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmAtmSpvcVccVciA | 1.3.6.1.4.1.1751.2.18.6.33.1.2 | ||
| VCI value for side A of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmAtmSpvcVccRemoteAtmPortAddr | 1.3.6.1.4.1.1751.2.18.6.33.1.3 | ||
| Remote ATM port NSAP address, not meaningful if passive type of connection. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1..20) | ||
| atmAtmSpvcVccIfB | 1.3.6.1.4.1.1751.2.18.6.33.1.4 | ||
| Interface index for side B of an ATM SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmAtmSpvcVccVpiB | 1.3.6.1.4.1.1751.2.18.6.33.1.5 | ||
| VPI value for side B of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmAtmSpvcVccVciB | 1.3.6.1.4.1.1751.2.18.6.33.1.6 | ||
| VCI value for side B of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmAtmSpvcVccServiceTypeA2B | 1.3.6.1.4.1.1751.2.18.6.33.1.7 | ||
| Service type, ATM port. | |||
| OBJECT-TYPE | |||
| INTEGER | ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), cbr4(7), cbr3(8), cbr2(9) | ||
| atmAtmSpvcVccSarTypeA2B | 1.3.6.1.4.1.1751.2.18.6.33.1.8 | ||
| SAR type used in ATM adaption, ATM port. | |||
| OBJECT-TYPE | |||
| INTEGER | aal5(1), aal3-4(2), aal2(3), aal1(4), null(5) | ||
| atmAtmSpvcVccPeakCellRateA2B | 1.3.6.1.4.1.1751.2.18.6.33.1.9 | ||
| Peak cell rate - side A, ATM port, in cells per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccSusCellRateA2B | 1.3.6.1.4.1.1751.2.18.6.33.1.10 | ||
| Sustained cell rate - side A, ATM port, in cells per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccMaxBurstSizeA2B | 1.3.6.1.4.1.1751.2.18.6.33.1.11 | ||
| Maximum burst size - side A, ATM port, in cells per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccFrwdErrCorrectionA2B | 1.3.6.1.4.1.1751.2.18.6.33.1.12 | ||
| Forward error correction scheme, ATM port side. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), eighthRate(2), quarterRate(3), halfRate(4), autoHiQ(5), auto(6), autoLoQ(7) | ||
| atmAtmSpvcVccServiceTypeB2A | 1.3.6.1.4.1.1751.2.18.6.33.1.13 | ||
| Service type, ATM trunk side. | |||
| OBJECT-TYPE | |||
| INTEGER | ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), cbr4(7), cbr3(8), cbr2(9) | ||
| atmAtmSpvcVccSarTypeB2A | 1.3.6.1.4.1.1751.2.18.6.33.1.14 | ||
| SAR type used in ATM adaption, ATM trunk side. | |||
| OBJECT-TYPE | |||
| INTEGER | aal5(1), aal3-4(2), aal2(3), aal1(4), null(5) | ||
| atmAtmSpvcVccPeakCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.33.1.15 | ||
| Peak cell rate - side B, ATM trunk, in cells per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccSusCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.33.1.16 | ||
| Sustained cell rate - side B, ATM trunk, in cells per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccMaxBurstSizeB2A | 1.3.6.1.4.1.1751.2.18.6.33.1.17 | ||
| Maximum burst size - side A, ATM trunk, in cells per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccFrwdErrCorrectionB2A | 1.3.6.1.4.1.1751.2.18.6.33.1.18 | ||
| Forward error correction scheme, ATM trunk side. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), eighthRate(2), quarterRate(3), halfRate(4), autoHiQ(5), auto(6), autoLoQ(7) | ||
| atmAtmSpvcVccFlow | 1.3.6.1.4.1.1751.2.18.6.33.1.19 | ||
| Type of flow, pointToMultipointA2B is for future support. | |||
| OBJECT-TYPE | |||
| INTEGER | duplex(1), simplexA2B(2), pointToMultipointA2B(3), simplexB2A(4), pointToMultipointB2A(5) | ||
| atmAtmSpvcVccType | 1.3.6.1.4.1.1751.2.18.6.33.1.20 | ||
| Type of connection. | |||
| OBJECT-TYPE | |||
| INTEGER | nonsecured(1), secured(2) | ||
| atmAtmSpvcVccConnType | 1.3.6.1.4.1.1751.2.18.6.33.1.21 | ||
| The type of connection: activeSvc - attempt calls, whenever not established. passiveSvc - accept calls. | |||
| OBJECT-TYPE | |||
| INTEGER | activeSvc(1), passiveSvc(2) | ||
| atmAtmSpvcVccLeafReference | 1.3.6.1.4.1.1751.2.18.6.33.1.22 | ||
| An arbitrary integer which serves to distinguish the mulitple leaves attached to a root of a point-to-multipoint SPVC. If point-to-point SPVC, the value should be 1. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| atmAtmSpvcVccOperStatus | 1.3.6.1.4.1.1751.2.18.6.33.1.23 | ||
| The operation status of the connection: other - none of the types specified below. establishmentInProgress - connection is not operational, but call attempts are ongoing. connected - connection is currently operational. retriesExhausted - retry limit has been reached and call attempts have ceased. noAddressSupplied - no remote address has been configured, so no call attempts are initiated. lowerLayerDown - SPVC handler is not operational. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), establishmentInProgress(2), connected(3), retriesExhausted(4), noAddressSupplied(5), lowerLayerDown(6), waitingForCall(7), waitingForRetryTimer(8) | ||
| atmAtmSpvcVccRowStatus | 1.3.6.1.4.1.1751.2.18.6.33.1.24 | ||
| Used to create and delete a soft PVC. When this object is set to 'active', an attempt is made to set up the soft PVC. When this object has the value 'active' and is set to another value, any setup or connection in-progress is released. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| atmAtmSpvcVccRemoteSelectType | 1.3.6.1.4.1.1751.2.18.6.33.1.25 | ||
| Indicates whether the remote VPI/VCI values are to be used at the destination. If 'any' is used, the destination switch will choose the VPI/VCI values. In such a case, once the SPVC is connected, the value of this object will change to 'required', such that the same VPI/VCI values will continue to be used even if the connection is torn down and re-established. If the value 'required' is specified, the values: atmAtmSpvcVccRemoteVpi and atmAtmSpvcVccRemoteVci, must be supplied and are used at the destination. | |||
| OBJECT-TYPE | |||
| INTEGER | required(1), any(2) | ||
| atmAtmSpvcVccRemoteVpi | 1.3.6.1.4.1.1751.2.18.6.33.1.26 | ||
| VPI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. If atmAtmSpvcVccRemoteSelectType is configured as 'any', then this value is not relevant. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmAtmSpvcVccRemoteVci | 1.3.6.1.4.1.1751.2.18.6.33.1.27 | ||
| VCI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. If atmAtmSpvcVccRemoteSelectType is configured as 'any', then this value is not relevant. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmAtmSpvcVccRetryInterval | 1.3.6.1.4.1.1751.2.18.6.33.1.28 | ||
| The time to wait before attempting to establish the SVC after a previous failed call attempt. A value of 0 indicates retries will be attempted immediately. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..3600 | ||
| atmAtmSpvcVccRetryLimit | 1.3.6.1.4.1.1751.2.18.6.33.1.29 | ||
| A maximum limit on how many retries should be attempted. A value of 0 indicates no limit. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmAtmSpvcVccRestart | 1.3.6.1.4.1.1751.2.18.6.33.1.30 | ||
| The active SVC is released, if necessary, and a new setup procedure is begun if 'restart', otherwise, noop. | |||
| OBJECT-TYPE | |||
| INTEGER | restart(1), noop(2) | ||
| atmAtmSpvcVccRetryFailure | 1.3.6.1.4.1.1751.2.18.6.33.1.31 | ||
| Indicates how many attempts to establish the connection have failed. It it reset whenever a connection is successfully established or the SVC is restarted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccReleaseCause | 1.3.6.1.4.1.1751.2.18.6.33.1.32 | ||
| CAUSE field value of the last RELEASE message received for this SVC. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..127 | ||
| atmAtmSpvcVccReleaseDiag | 1.3.6.1.4.1.1751.2.18.6.33.1.33 | ||
| DIAGNOSTICS field value of the last RELEASE message received for this SVC. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..8) | ||
| atmAtmSpvcVccRelease | 1.3.6.1.4.1.1751.2.18.6.33.1.34 | ||
| Release the connnection established on the endpoint and if the endpoint is Active, do not retry. | |||
| OBJECT-TYPE | |||
| INTEGER | release(1), noop(2) | ||
| atmAtmSpvcVccStatsInCellCountHiA | 1.3.6.1.4.1.1751.2.18.6.33.1.35 | ||
| Valid Cells received on A - (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccStatsInCellCountLoA | 1.3.6.1.4.1.1751.2.18.6.33.1.36 | ||
| Valid Cells received on A - (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccStatsOutCellCountHiA | 1.3.6.1.4.1.1751.2.18.6.33.1.37 | ||
| Valid cells transmitted on A -(High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccStatsOutCellCountLoA | 1.3.6.1.4.1.1751.2.18.6.33.1.38 | ||
| Valid cells transmitted on A -(Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccStatsInCellCountHiB | 1.3.6.1.4.1.1751.2.18.6.33.1.39 | ||
| Valid Cells received on B - (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccStatsInCellCountLoB | 1.3.6.1.4.1.1751.2.18.6.33.1.40 | ||
| Valid Cells received on B - (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccStatsOutCellCountHiB | 1.3.6.1.4.1.1751.2.18.6.33.1.41 | ||
| Valid cells transmitted on B -(High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccStatsOutCellCountLoB | 1.3.6.1.4.1.1751.2.18.6.33.1.42 | ||
| Valid cells transmitted on B -(Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccStatsTimer | 1.3.6.1.4.1.1751.2.18.6.33.1.43 | ||
| Number of seconds stats have been collecting | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccStatsFrwdErrCrrctnRateA2B | 1.3.6.1.4.1.1751.2.18.6.33.1.44 | ||
| Displays the Forward error correction rate being used by the FEC module in the A2B direction. This field is dynamic when Auto rates are selected. In other cases, it will display the rate set by the user. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), eighthRate(2), quarterRate(3), halfRate(4) | ||
| atmAtmSpvcVccStatsFrwdErrCrrctnRateB2A | 1.3.6.1.4.1.1751.2.18.6.33.1.45 | ||
| Displays the Forward error correction rate being used by the FEC module in the B2A direction. This field is dynamic when Auto rates are selected. In other cases, it will display the rate set by the user. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), eighthRate(2), quarterRate(3), halfRate(4) | ||
| atmAtmSpvcVccStatsInOdometerCellCountHiA | 1.3.6.1.4.1.1751.2.18.6.33.1.46 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccStatsInOdometerCellCountLoA | 1.3.6.1.4.1.1751.2.18.6.33.1.47 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccStatsOutOdometerCellCountHiA | 1.3.6.1.4.1.1751.2.18.6.33.1.48 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccStatsOutOdometerCellCountLoA | 1.3.6.1.4.1.1751.2.18.6.33.1.49 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccStatsInOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.6.33.1.50 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccStatsInOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.6.33.1.51 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccStatsOutOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.6.33.1.52 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccStatsOutOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.6.33.1.53 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccStatsOdometerTimer | 1.3.6.1.4.1.1751.2.18.6.33.1.54 | ||
| Number of seconds since odometer was reset. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccStatsOdometerReset | 1.3.6.1.4.1.1751.2.18.6.33.1.55 | ||
| Odometer reset button. | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| atmAtmSpvcVccViA | 1.3.6.1.4.1.1751.2.18.6.33.1.56 | ||
| VI to associate the Egress part of the B2A connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| atmAtmSpvcVccViB | 1.3.6.1.4.1.1751.2.18.6.33.1.57 | ||
| VI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| atmAtmSpvcVccStatsCellsDroppedA | 1.3.6.1.4.1.1751.2.18.6.33.1.58 | ||
| Cells Dropped on the Incoming side of A | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccStatsCellsTaggedA | 1.3.6.1.4.1.1751.2.18.6.33.1.59 | ||
| Cells Tagged on the Incoming side of A | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccStatsCellsDroppedB | 1.3.6.1.4.1.1751.2.18.6.33.1.60 | ||
| Cells Dropped on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccStatsCellsTaggedB | 1.3.6.1.4.1.1751.2.18.6.33.1.61 | ||
| Cells Tagged on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVccVUNIA | 1.3.6.1.4.1.1751.2.18.6.33.1.62 | ||
| VUNI to associate the Egress part of the B2A connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmAtmSpvcVccVUNIB | 1.3.6.1.4.1.1751.2.18.6.33.1.63 | ||
| VUNI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmAtmSpvcVccTrafficShapingA2B | 1.3.6.1.4.1.1751.2.18.6.33.1.64 | ||
| Traffic Shaping Support in the A2B direction. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| atmAtmSpvcVccTrafficShapingB2A | 1.3.6.1.4.1.1751.2.18.6.33.1.65 | ||
| Traffic Shaping Support in the B2A direction. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| atmAtmSpvcVccPriority | 1.3.6.1.4.1.1751.2.18.6.33.1.66 | ||
| Priority of SPVC - priority-1 being highest priority . | |||
| OBJECT-TYPE | |||
| INTEGER | priority-1(1), priority-2(2), priority-3(3), priority-4(4) | ||
| cirAtmSpvcVccTable | 1.3.6.1.4.1.1751.2.18.6.34 | ||
| Table of Circuit Emulation to ATM Soft PVCs. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| CirAtmSpvcVccEntry | |||
| cirAtmSpvcVccEntry | 1.3.6.1.4.1.1751.2.18.6.34.1 | ||
| Row definition of circuit emulation to ATM SPVC connections. | |||
| OBJECT-TYPE | |||
| CirAtmSpvcVccEntry | |||
| cirAtmSpvcVccRemoteCePortAddr | 1.3.6.1.4.1.1751.2.18.6.34.1.1 | ||
| The ATM address supporting the corresponding far end CES IWF process. If no address is supplied, no attempts to establish the active SVC are initiated. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1..20) | ||
| cirAtmSpvcVccIfB | 1.3.6.1.4.1.1751.2.18.6.34.1.2 | ||
| Interface index for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| cirAtmSpvcVccVpiB | 1.3.6.1.4.1.1751.2.18.6.34.1.3 | ||
| VPI value for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| cirAtmSpvcVccVciB | 1.3.6.1.4.1.1751.2.18.6.34.1.4 | ||
| VCI value for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| cirAtmSpvcVccVoiceCompressionA2B | 1.3.6.1.4.1.1751.2.18.6.34.1.5 | ||
| Voice Compression Algorithm | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), g726-16k(2), g726-24k(3), g726-32k(4), g726-40k(5), g729a-8k(6) | ||
| cirAtmSpvcVccSilenceDetectionA2B | 1.3.6.1.4.1.1751.2.18.6.34.1.6 | ||
| silence detection off/on | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| cirAtmSpvcVccEchoCancellationA2B | 1.3.6.1.4.1.1751.2.18.6.34.1.7 | ||
| Echo Cancellation Algorithm | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), g165-nearEnd(2), g168(3) | ||
| cirAtmSpvcVccCngToneDetectionA2B | 1.3.6.1.4.1.1751.2.18.6.34.1.8 | ||
| Calling Tone Detection Algorithm, one of the enum value, g726-32k(3) is obsoleted on 01Mar99 such that user would not be able to configure CE-ATM | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), bypass(2), g726-32k(3) | ||
| cirAtmSpvcVccCodingTranslationA2B | 1.3.6.1.4.1.1751.2.18.6.34.1.9 | ||
| Coding rule translation type. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), muLaw2muLaw(2), aLaw2aLaw(3), muLaw2aLaw(4), aLaw2muLaw(5) | ||
| cirAtmSpvcVccVoiceCompressionB2A | 1.3.6.1.4.1.1751.2.18.6.34.1.10 | ||
| Voice Compression Algorithm | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), g726-16k(2), g726-24k(3), g726-32k(4), g726-40k(5), g729a-8k(6) | ||
| cirAtmSpvcVccSilenceDetectionB2A | 1.3.6.1.4.1.1751.2.18.6.34.1.11 | ||
| silence detection off/on | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| cirAtmSpvcVccEchoCancellationB2A | 1.3.6.1.4.1.1751.2.18.6.34.1.12 | ||
| Echo Cancellation Algorithm | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), g165-nearEnd(2), g168(3) | ||
| cirAtmSpvcVccCngToneDetectionB2A | 1.3.6.1.4.1.1751.2.18.6.34.1.13 | ||
| Calling Tone Detection Algorithm, one of the enum value, g726-32k(3) is obsoleted on 01Mar99 such that user would not be able to configure CE-ATM | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), bypass(2), g726-32k(3) | ||
| cirAtmSpvcVccCodingTranslationB2A | 1.3.6.1.4.1.1751.2.18.6.34.1.14 | ||
| Coding rule translation type. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), muLaw2muLaw(2), aLaw2aLaw(3), muLaw2aLaw(4), aLaw2muLaw(5) | ||
| cirAtmSpvcVccFlow | 1.3.6.1.4.1.1751.2.18.6.34.1.15 | ||
| Flow Type, pointToMultipointA2B and pointToMultipointB2A are for future support. | |||
| OBJECT-TYPE | |||
| INTEGER | duplex(1), simplexA2B(2), simplexB2A(3), pointToMultipointA2B(4), pointToMultipointB2A(5) | ||
| cirAtmSpvcVccServiceType | 1.3.6.1.4.1.1751.2.18.6.34.1.16 | ||
| service type | |||
| OBJECT-TYPE | |||
| INTEGER | cbr-2(2), cbr-3(3), cbr-4(4) | ||
| cirAtmSpvcVccConnType | 1.3.6.1.4.1.1751.2.18.6.34.1.17 | ||
| The type of connection: activeSvc - attempt calls, whenever not established; passiveSvc - accepts calls | |||
| OBJECT-TYPE | |||
| INTEGER | activeSvc(1), passiveSvc(2) | ||
| cirAtmSpvcVccOperStatus | 1.3.6.1.4.1.1751.2.18.6.34.1.18 | ||
| other - none of the types specified below; establishmentInProgress - connection is not operational, but call attempts are ongoing; connected - connection is currently operational; retriesExhausted - retry limit has been reached and call attempts have ceased; noAddressSupplied - no remote address has been configured, so no call attempts are initiated; lowerLayerDown - SPVC handler is not operational. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), establishmentInProgress(2), connected(3), retriesExhausted(4), noAddressSupplied(5), lowerLayerDown(6), waitingForCall(7), waitingForRetryTimer(8) | ||
| cirAtmSpvcVccRowStatus | 1.3.6.1.4.1.1751.2.18.6.34.1.19 | ||
| Used to create and delete a soft PVCC. When this object is set to 'active' an attempt is made to set up the soft PVCC. When this object has the value 'active' and is set to another value, any set-up or connection in-progess is released. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| cirAtmSpvcVccViB | 1.3.6.1.4.1.1751.2.18.6.34.1.20 | ||
| VI to associate the Egress part of the B2A connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| cirAtmSpvcVccRetryInterval | 1.3.6.1.4.1.1751.2.18.6.34.1.21 | ||
| The time to wait before attempting to establish the SVC after previous failed call attempt. 0 indicates retries will be attempted immediately. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..3600 | ||
| cirAtmSpvcVccRetryLimit | 1.3.6.1.4.1.1751.2.18.6.34.1.22 | ||
| A maximum limit on how many retries. 0 indicates no limit. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| cirAtmSpvcVccRestart | 1.3.6.1.4.1.1751.2.18.6.34.1.23 | ||
| restart, the active SVC is released if necessary and a new setup procedure is begun; or noop | |||
| OBJECT-TYPE | |||
| INTEGER | restart(1), noop(2) | ||
| cirAtmSpvcVccRetryFailure | 1.3.6.1.4.1.1751.2.18.6.34.1.24 | ||
| Indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the SVC is restarted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirAtmSpvcVccReleaseCause | 1.3.6.1.4.1.1751.2.18.6.34.1.25 | ||
| CAUSE field value of the last RELEASE message received for this SVC. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..127 | ||
| cirAtmSpvcVccReleaseDiag | 1.3.6.1.4.1.1751.2.18.6.34.1.26 | ||
| DIAGNOSTICS field value of the last RELEASE message received for this SVC. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..8) | ||
| cirAtmSpvcVccRelease | 1.3.6.1.4.1.1751.2.18.6.34.1.27 | ||
| Release the connnection established on the endpoint and if the endpoint is Active, do not retry. | |||
| OBJECT-TYPE | |||
| INTEGER | release(1), noop(2) | ||
| cirAtmSpvcVccStatsCellsEncodedHiA | 1.3.6.1.4.1.1751.2.18.6.34.1.28 | ||
| Cells encoded on side A- (High order portion ) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirAtmSpvcVccStatsCellsEncodedLoA | 1.3.6.1.4.1.1751.2.18.6.34.1.29 | ||
| Cells encoded on side A - ( Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirAtmSpvcVccStatsCellsDecodedHiA | 1.3.6.1.4.1.1751.2.18.6.34.1.30 | ||
| Cells decoded on side A - ( High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirAtmSpvcVccStatsCellsDecodedLoA | 1.3.6.1.4.1.1751.2.18.6.34.1.31 | ||
| Cells decoded on side A - (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirAtmSpvcVccStatsInCellCountHiB | 1.3.6.1.4.1.1751.2.18.6.34.1.32 | ||
| Valid Cells received on B - (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirAtmSpvcVccStatsInCellCountLoB | 1.3.6.1.4.1.1751.2.18.6.34.1.33 | ||
| Valid Cells received on B - (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirAtmSpvcVccStatsOutCellCountHiB | 1.3.6.1.4.1.1751.2.18.6.34.1.34 | ||
| Valid cells transmitted on B- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirAtmSpvcVccStatsOutCellCountLoB | 1.3.6.1.4.1.1751.2.18.6.34.1.35 | ||
| Valid cells transmitted on B -(Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirAtmSpvcVccStatsTimer | 1.3.6.1.4.1.1751.2.18.6.34.1.36 | ||
| Number of seconds since stats have been collecting | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirAtmSpvcVccStatsOdometerCellsEncodedHiA | 1.3.6.1.4.1.1751.2.18.6.34.1.37 | ||
| Cells encoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirAtmSpvcVccStatsOdometerCellsEncodedLoA | 1.3.6.1.4.1.1751.2.18.6.34.1.38 | ||
| Cells encoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirAtmSpvcVccStatsOdometerCellsDecodedHiA | 1.3.6.1.4.1.1751.2.18.6.34.1.39 | ||
| Cells decoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirAtmSpvcVccStatsOdometerCellsDecodedLoA | 1.3.6.1.4.1.1751.2.18.6.34.1.40 | ||
| Cells decoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirAtmSpvcVccStatsInOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.6.34.1.41 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirAtmSpvcVccStatsInOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.6.34.1.42 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirAtmSpvcVccStatsOutOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.6.34.1.43 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirAtmSpvcVccStatsOutOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.6.34.1.44 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirAtmSpvcVccStatsOdometerTimer | 1.3.6.1.4.1.1751.2.18.6.34.1.45 | ||
| Number of seconds since odometer was reset. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirAtmSpvcVccStatsOdometerReset | 1.3.6.1.4.1.1751.2.18.6.34.1.46 | ||
| Odometer reset button. | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| cirAtmSpvcVccStatsCellsDroppedB | 1.3.6.1.4.1.1751.2.18.6.34.1.47 | ||
| Cells Dropped on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirAtmSpvcVccStatsCellsTaggedB | 1.3.6.1.4.1.1751.2.18.6.34.1.48 | ||
| Cells Tagged on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirAtmSpvcVccVUNIB | 1.3.6.1.4.1.1751.2.18.6.34.1.49 | ||
| VUNI to associate the Egress part of the B2A connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| cirAtmSpvcVccSarTypeB | 1.3.6.1.4.1.1751.2.18.6.34.1.50 | ||
| This field will only be used when selecting voice compression, in other cases it will be set to aal1. | |||
| OBJECT-TYPE | |||
| INTEGER | aal1(1), aal2(2) | ||
| cirAtmSpvcVccPriority | 1.3.6.1.4.1.1751.2.18.6.34.1.51 | ||
| Priority of SPVC - priority-1 being highest priority . | |||
| OBJECT-TYPE | |||
| INTEGER | priority-1(1), priority-2(2), priority-3(3), priority-4(4) | ||
| vbrAtmSpvcTable | 1.3.6.1.4.1.1751.2.18.6.35 | ||
| Table of SPVC atm virtual channel connections | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| VbrAtmSpvcEntry | |||
| vbrAtmSpvcEntry | 1.3.6.1.4.1.1751.2.18.6.35.1 | ||
| Row definition of atm SPVC VCC connections | |||
| OBJECT-TYPE | |||
| VbrAtmSpvcEntry | |||
| vbrAtmSpvcRemoteVbrPortAddr | 1.3.6.1.4.1.1751.2.18.6.35.1.1 | ||
| remote VBR port nsap address implemening IWF, not meaningful if passive type of connection | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1..20) | ||
| vbrAtmSpvcIfB | 1.3.6.1.4.1.1751.2.18.6.35.1.2 | ||
| Interface index for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| vbrAtmSpvcVpiB | 1.3.6.1.4.1.1751.2.18.6.35.1.3 | ||
| VPI value for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| vbrAtmSpvcVciB | 1.3.6.1.4.1.1751.2.18.6.35.1.4 | ||
| VCI value for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| vbrAtmSpvcServiceType | 1.3.6.1.4.1.1751.2.18.6.35.1.5 | ||
| service type | |||
| OBJECT-TYPE | |||
| INTEGER | ubr(1), vbr-nrt1(2), vbr-nrt2(3), vbr-rt1(4), vbr-rt2(5), vbr-express(6) | ||
| vbrAtmSpvcPeakCellRateA2B | 1.3.6.1.4.1.1751.2.18.6.35.1.6 | ||
| peak cell rate - side A, in cell per second | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcSusCellRateA2B | 1.3.6.1.4.1.1751.2.18.6.35.1.7 | ||
| sustained rate - side A, in cell per second | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcMaxBurstSizeA2B | 1.3.6.1.4.1.1751.2.18.6.35.1.8 | ||
| maximum burst size - side A, in cells | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcPeakCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.35.1.9 | ||
| peak rate - side B, ATM trunk, in cell per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcSusCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.35.1.10 | ||
| sustained rate - side B, ATM trunk, in cell per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcMaxBurstSizeB2A | 1.3.6.1.4.1.1751.2.18.6.35.1.11 | ||
| maximum burst size - side B, ATM trunk, in cells. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcFlow | 1.3.6.1.4.1.1751.2.18.6.35.1.12 | ||
| type of flow | |||
| OBJECT-TYPE | |||
| INTEGER | duplex(1), simplexA2B(2), simplexB2A(3) | ||
| vbrAtmSpvcConnType | 1.3.6.1.4.1.1751.2.18.6.35.1.13 | ||
| The type of connection: activeSvc - attempt calls, whenever not established; passiveSvc - accepts calls | |||
| OBJECT-TYPE | |||
| INTEGER | activeSvc(1), passiveSvc(2) | ||
| vbrAtmSpvcOperStatus | 1.3.6.1.4.1.1751.2.18.6.35.1.14 | ||
| other - none of the types specified below; establishmentInProgress - connection is not operational, but call attempts are ongoing; connected - connection is currently operational; retriesExhausted - retry limit has been reached and call attempts have ceased; noAddressSupplied - no remote address has been configured, so no call attempts are initiated; lowerLayerDown - SPVC handler is not operational. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), establishmentInProgress(2), connected(3), retriesExhausted(4), noAddressSupplied(5), lowerLayerDown(6), waitingForCall(7), waitingForRetryTimer(8) | ||
| vbrAtmSpvcRowStatus | 1.3.6.1.4.1.1751.2.18.6.35.1.15 | ||
| Used to create and delete a soft PVCC. When this object is set to 'active' an attempt is made to set up the soft PVCC. When this object has the value 'active' and is set to another value, any set-up or connection in-progess is released. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| vbrAtmSpvcViB | 1.3.6.1.4.1.1751.2.18.6.35.1.16 | ||
| VI to associate the Egress part of the B2A connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| vbrAtmSpvcRetryInterval | 1.3.6.1.4.1.1751.2.18.6.35.1.17 | ||
| the time to wait before attempting to establish the SVC after previous failed call attempt. 0 indicates retries will be attempted immediately. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..3600 | ||
| vbrAtmSpvcRetryLimit | 1.3.6.1.4.1.1751.2.18.6.35.1.18 | ||
| a maximum limit on how many retries. 0 indicates no limit. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| vbrAtmSpvcRestart | 1.3.6.1.4.1.1751.2.18.6.35.1.19 | ||
| restart, the active SVC is released if necessary and a new setup procedure is begun; or noop | |||
| OBJECT-TYPE | |||
| INTEGER | restart(1), noop(2) | ||
| vbrAtmSpvcRetryFailure | 1.3.6.1.4.1.1751.2.18.6.35.1.20 | ||
| indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the SVC is restarted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcReleaseCause | 1.3.6.1.4.1.1751.2.18.6.35.1.21 | ||
| CAUSE field value of the last RELEASE message received for this SVC | |||
| OBJECT-TYPE | |||
| INTEGER | 1..127 | ||
| vbrAtmSpvcReleaseDiag | 1.3.6.1.4.1.1751.2.18.6.35.1.22 | ||
| DIAGNOSTICS field value of the last RELEASE message received for this SVC | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..8) | ||
| vbrAtmSpvcRelease | 1.3.6.1.4.1.1751.2.18.6.35.1.23 | ||
| Release the connnection established on the endpoint and if the endpoint is Active, do not retry. | |||
| OBJECT-TYPE | |||
| INTEGER | release(1), noop(2) | ||
| vbrAtmSpvcStatsCellsEncodedHiA | 1.3.6.1.4.1.1751.2.18.6.35.1.24 | ||
| Cells encoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcStatsCellsEncodedLoA | 1.3.6.1.4.1.1751.2.18.6.35.1.25 | ||
| ells encoded on side A - (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcStatsCellsDecodedHiA | 1.3.6.1.4.1.1751.2.18.6.35.1.26 | ||
| Cells decoded on side A - (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcStatsCellsDecodedLoA | 1.3.6.1.4.1.1751.2.18.6.35.1.27 | ||
| Cells decoded on side A - (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcStatsInCellCountHiB | 1.3.6.1.4.1.1751.2.18.6.35.1.28 | ||
| Valid Cells received on B - (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcStatsInCellCountLoB | 1.3.6.1.4.1.1751.2.18.6.35.1.29 | ||
| Valid Cells received on B - (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcStatsOutCellCountHiB | 1.3.6.1.4.1.1751.2.18.6.35.1.30 | ||
| Valid cells transmitted on B -(High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcStatsOutCellCountLoB | 1.3.6.1.4.1.1751.2.18.6.35.1.31 | ||
| Valid cells transmitted on B - (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcStatsTimer | 1.3.6.1.4.1.1751.2.18.6.35.1.32 | ||
| Number of seconds stats have been collecting | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcStatsOdometerCellsEncodedHiA | 1.3.6.1.4.1.1751.2.18.6.35.1.33 | ||
| Cells encoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcStatsOdometerCellsEncodedLoA | 1.3.6.1.4.1.1751.2.18.6.35.1.34 | ||
| Cells encoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcStatsOdometerCellsDecodedHiA | 1.3.6.1.4.1.1751.2.18.6.35.1.35 | ||
| Cells decoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcStatsOdometerCellsDecodedLoA | 1.3.6.1.4.1.1751.2.18.6.35.1.36 | ||
| Cells decoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcStatsInOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.6.35.1.37 | ||
| Valid Cells received on B - (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcStatsInOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.6.35.1.38 | ||
| Valid Cells received on B - (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcStatsOutOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.6.35.1.39 | ||
| Valid Cells transmitted on B -(High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcStatsOutOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.6.35.1.40 | ||
| Valid Cells transmitted on B -(Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcStatsOdometerTimer | 1.3.6.1.4.1.1751.2.18.6.35.1.41 | ||
| Number of seconds since odometer was reset. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcStatsOdometerReset | 1.3.6.1.4.1.1751.2.18.6.35.1.42 | ||
| Odometer reset button. | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| vbrAtmSpvcStatsCellsDroppedB | 1.3.6.1.4.1.1751.2.18.6.35.1.43 | ||
| Cells Dropped on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcStatsCellsTaggedB | 1.3.6.1.4.1.1751.2.18.6.35.1.44 | ||
| Cells Tagged on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVUNIB | 1.3.6.1.4.1.1751.2.18.6.35.1.45 | ||
| VUNI to associate the Egress part of the B2A connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| vbrAtmSpvcTrafficShapingA2B | 1.3.6.1.4.1.1751.2.18.6.35.1.46 | ||
| Traffic Shaping Support in the A2B direction. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| vbrAtmSpvcPriority | 1.3.6.1.4.1.1751.2.18.6.35.1.47 | ||
| Priority of SPVC - priority-1 being highest priority . | |||
| OBJECT-TYPE | |||
| INTEGER | priority-1(1), priority-2(2), priority-3(3), priority-4(4) | ||
| aal2TrunkConfigTable | 1.3.6.1.4.1.1751.2.18.6.36 | ||
| Table of terminal emulation to ATM network IWF connections | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Aal2TrunkConfigEntry | |||
| aal2TrunkConfigEntry | 1.3.6.1.4.1.1751.2.18.6.36.1 | ||
| Row definition of terminal emulation to ATM network IWF connections | |||
| OBJECT-TYPE | |||
| Aal2TrunkConfigEntry | |||
| aal2TrunkConfigIf | 1.3.6.1.4.1.1751.2.18.6.36.1.1 | ||
| Interface Id of the Atm Side of the Aal2 Trunk. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| aal2TrunkConfigVpi | 1.3.6.1.4.1.1751.2.18.6.36.1.2 | ||
| VPI value for Atm side , the atm side, of a atm trunk connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| aal2TrunkConfigVci | 1.3.6.1.4.1.1751.2.18.6.36.1.3 | ||
| VCI value for the atm side, of a variable bit rate-atm PVC VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| aal2TrunkConfigServiceType | 1.3.6.1.4.1.1751.2.18.6.36.1.4 | ||
| Service/Queue types supported for Aal2 Trunk connections.When using Vbr/Ubr type service type oversubscription will have to be taken into account for which nature of traffic going over the Trunk should be known before hand | |||
| OBJECT-TYPE | |||
| INTEGER | cbr-1(1), cbr-2(2), cbr-3(3), cbr-4(4), ubr(5), vbr-nrt2(6), vbr-nrt1(7), vbr-rt2(8), vbr-rt1(9), vbr-express(10) | ||
| aal2TrunkConfigPeakCellRateIgr | 1.3.6.1.4.1.1751.2.18.6.36.1.5 | ||
| peak cell rate - atm side inp, in cell per second | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| aal2TrunkConfigSusCellRateIgr | 1.3.6.1.4.1.1751.2.18.6.36.1.6 | ||
| sustained rate - atm side inp, in cell per second | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| aal2TrunkConfigMaxBurstSizeIgr | 1.3.6.1.4.1.1751.2.18.6.36.1.7 | ||
| maximum burst size - atm side inp, in cells | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| aal2TrunkConfigPeakCellRateEgr | 1.3.6.1.4.1.1751.2.18.6.36.1.8 | ||
| peak rate - atm side output, in cell per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| aal2TrunkConfigSusCellRateEgr | 1.3.6.1.4.1.1751.2.18.6.36.1.9 | ||
| sustained rate - atm side output,in cell per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| aal2TrunkConfigMaxBurstSizeEgr | 1.3.6.1.4.1.1751.2.18.6.36.1.10 | ||
| maximum burst size - atm side output, in cells. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| aal2TrunkConfigFlow | 1.3.6.1.4.1.1751.2.18.6.36.1.11 | ||
| Flow type | |||
| OBJECT-TYPE | |||
| INTEGER | duplex(1) | ||
| aal2TrunkConfigRowStatus | 1.3.6.1.4.1.1751.2.18.6.36.1.12 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| aal2TrunkConfigConnectionStatus | 1.3.6.1.4.1.1751.2.18.6.36.1.13 | ||
| Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated . InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. | |||
| OBJECT-TYPE | |||
| INTEGER | active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) | ||
| aal2TrunkConfigViB | 1.3.6.1.4.1.1751.2.18.6.36.1.14 | ||
| VI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| aal2TrunkConfigCnfrmTypeB2A | 1.3.6.1.4.1.1751.2.18.6.36.1.15 | ||
| The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. | |||
| OBJECT-TYPE | |||
| INTEGER | best-effort(1), one-bucket-notag-0plus1(2), two-bucket-notag-0plus1-0plus1(3), two-bucket-notag-0plus1-0(4), two-bucket-tag-0plus1-0(5), best-effort-tag(6) | ||
| aal2TrunkConfigVUNIB | 1.3.6.1.4.1.1751.2.18.6.36.1.16 | ||
| VUNI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| aal2TrunkAvailBwIgr | 1.3.6.1.4.1.1751.2.18.6.36.1.17 | ||
| The Avail Bandwidth for that interface in cells per sec. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| aal2TrunkAvailBwEgr | 1.3.6.1.4.1.1751.2.18.6.36.1.18 | ||
| The Avail Bandwidth for that interface in cells per sec. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| aal2TrunkGR303 | 1.3.6.1.4.1.1751.2.18.6.36.1.19 | ||
| This flag is used to check if a GR303 Feature is enabled for the trunk. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| aal2TrunkConfigOamStatus | 1.3.6.1.4.1.1751.2.18.6.36.1.20 | ||
| Indicates the OAM monitoring status of side A. The 2 possible states are: Unsupp: No monitoring enabled. End-Pt: Atm side is only an end point, therefore it will respond to AIS/RDI. End-Seg-Pt: A side is both an end point and a segment point. | |||
| OBJECT-TYPE | |||
| INTEGER | unsupp(1), end-Pt(2), end-Seg-Pt(3) | ||
| aal2TrunkConnFailureCauseB | 1.3.6.1.4.1.1751.2.18.6.36.1.21 | ||
| connection status reason code | |||
| OBJECT-TYPE | |||
| AtmConnFailureCause | |||
| aal2TrunkCuTimer | 1.3.6.1.4.1.1751.2.18.6.36.1.22 | ||
| CuTimer represents 'combined use timer', is set to zero such that every ATM cell transmitted contains one, and only one, AAL2 packet, and the first octet of the AAL2 packet header follows immediately after the Start Field in the ATM cell payload. If the AAL2 packet payload is less than 44 octets, the remainder of the ATM cell payload following the end of the AAL2 packet shall be filled with zeros as padding. Each increment of CuTimer means 5ms more to wait. And cuTimer default value 4 means to wait 20ms before the ATM cell is sent out. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..8 | ||
| gr303Aal2PvcVccTable | 1.3.6.1.4.1.1751.2.18.6.37 | ||
| Table of Gr303 to AAL2 Cid monitor VCCs | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Gr303Aal2PvcVccEntry | |||
| gr303Aal2PvcVccEntry | 1.3.6.1.4.1.1751.2.18.6.37.1 | ||
| Row definition of circuit emulation to atm connections. | |||
| OBJECT-TYPE | |||
| Gr303Aal2PvcVccEntry | |||
| gr303Aal2PvcVccGr303IgId | 1.3.6.1.4.1.1751.2.18.6.37.1.1 | ||
| GR303 interface group id on the GR303 side of the connection | |||
| OBJECT-TYPE | |||
| INTEGER | 0..84 | ||
| gr303Aal2PvcVccGr303CallRef | 1.3.6.1.4.1.1751.2.18.6.37.1.2 | ||
| The call reference value to be used in the signaling packets on the GR303 interface for the connection on the AAL2CID corresponding to this connection | |||
| OBJECT-TYPE | |||
| INTEGER | 1..2048 | ||
| gr303Aal2PvcVccIfB | 1.3.6.1.4.1.1751.2.18.6.37.1.3 | ||
| Interface index for side B, the atm side, of a circuit emulation-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| gr303Aal2PvcVccVpiB | 1.3.6.1.4.1.1751.2.18.6.37.1.4 | ||
| VPI value for side B, the atm side, of a circuit emulation-atm PVC VCC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| gr303Aal2PvcVccVciB | 1.3.6.1.4.1.1751.2.18.6.37.1.5 | ||
| VCI value for side B, the atm side, of a circuit emulation-atm PVC VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| gr303Aal2PvcVccAal2Cid | 1.3.6.1.4.1.1751.2.18.6.37.1.6 | ||
| Aal2 Cid Used to pack ce chan in an Atm Trunk. This value will be unique per Atm Trunk. This field will be applicable when Aal type is chosen to be Standard Aal2. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| gr303Aal2PvcVccRowStatus | 1.3.6.1.4.1.1751.2.18.6.37.1.7 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| gr303Aal2PvcVccVoiceEncodingProfile | 1.3.6.1.4.1.1751.2.18.6.37.1.8 | ||
| Profile for use by voice/voiceband data. Profile-3 and Profile-7 are ITU-T predefined profiles which specify the voice compression and silence removal algorithms. If custom profile is chosen all DSP specific parameters have to be specified by the user. If default profile is chosen all parameters on the AAL2 trunk, containing this CID, will be used. | |||
| OBJECT-TYPE | |||
| INTEGER | itut-profile-1(1), itut-profile-3(3), af-profile-6(6), itut-profile-7(7), af-profile-7(8), af-profile-8(9), af-profile-9(10), af-profile-10(11), af-profile-12(12), custom(256), default(257) | ||
| gr303Aal2PvcVccVoiceCompression | 1.3.6.1.4.1.1751.2.18.6.37.1.9 | ||
| Voice Compression Algorithm | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), g726-16k(2), g726-24k(3), g726-32k(4), g726-40k(5), g729a-8k(6) | ||
| gr303Aal2PvcVccSilenceDetection | 1.3.6.1.4.1.1751.2.18.6.37.1.10 | ||
| silence detection off/on | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| gr303Aal2PvcVccEchoCancellation | 1.3.6.1.4.1.1751.2.18.6.37.1.11 | ||
| Echo Cancellation Algorithm | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), g165-nearEnd(2), g168(3) | ||
| gr303Aal2PvcVccCngToneDetection | 1.3.6.1.4.1.1751.2.18.6.37.1.12 | ||
| Calling Tone Detection Algorithm | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), bypass(2) | ||
| gr303Aal2PvcVccCodingTranslation | 1.3.6.1.4.1.1751.2.18.6.37.1.13 | ||
| Coding rule translation type. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), muLaw2muLaw(2), aLaw2aLaw(3), muLaw2aLaw(4), aLaw2muLaw(5) | ||
| gr303Aal2PvcVccConnectionStatus | 1.3.6.1.4.1.1751.2.18.6.37.1.14 | ||
| Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. | |||
| OBJECT-TYPE | |||
| INTEGER | active(1), inactive(2) | ||
| gr303Aal2PvcVccAltLineType | 1.3.6.1.4.1.1751.2.18.6.37.1.15 | ||
| Analog Line Termination Line Type on the subscriber side. The ABCD bit codes for diffterent signal types depend on the analog line type. The analog type can be overwritten by an EOC message from the IDT | |||
| OBJECT-TYPE | |||
| INTEGER | alt-LoopReverseBattery(1), alt-groundStart(9), alt-loopStart(13), alt-winkStart(29) | ||
| atmAtmSpvcVpcTable | 1.3.6.1.4.1.1751.2.18.6.38 | ||
| Table of SPVC ATM virtual path connections. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmAtmSpvcVpcEntry | |||
| atmAtmSpvcVpcEntry | 1.3.6.1.4.1.1751.2.18.6.38.1 | ||
| Row definition of ATM SPVC VPC connections. | |||
| OBJECT-TYPE | |||
| AtmAtmSpvcVpcEntry | |||
| atmAtmSpvcVpcVpiA | 1.3.6.1.4.1.1751.2.18.6.38.1.1 | ||
| VPI value for side A of an ATM SPVC VPC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmAtmSpvcVpcRemoteAtmPortAddr | 1.3.6.1.4.1.1751.2.18.6.38.1.2 | ||
| Remote ATM port NSAP address, not meaningful if passive type of connection. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1..20) | ||
| atmAtmSpvcVpcIfB | 1.3.6.1.4.1.1751.2.18.6.38.1.3 | ||
| Interface index for side B of an ATM SPVC VPC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the path number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmAtmSpvcVpcVpiB | 1.3.6.1.4.1.1751.2.18.6.38.1.4 | ||
| VPI value for side B of an ATM SPVC VPC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmAtmSpvcVpcServiceTypeA2B | 1.3.6.1.4.1.1751.2.18.6.38.1.5 | ||
| Service type, ATM port. | |||
| OBJECT-TYPE | |||
| INTEGER | ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), cbr4(7), cbr3(8), cbr2(9) | ||
| atmAtmSpvcVpcSarTypeA2B | 1.3.6.1.4.1.1751.2.18.6.38.1.6 | ||
| SAR type used in ATM adaption, ATM port. | |||
| OBJECT-TYPE | |||
| INTEGER | aal5(1), aal3-4(2), aal2(3), aal1(4), null(5) | ||
| atmAtmSpvcVpcPeakCellRateA2B | 1.3.6.1.4.1.1751.2.18.6.38.1.7 | ||
| Peak cell rate - side A, ATM port, in cells per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcSusCellRateA2B | 1.3.6.1.4.1.1751.2.18.6.38.1.8 | ||
| Sustained cell rate - side A, ATM port, in cells per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcMaxBurstSizeA2B | 1.3.6.1.4.1.1751.2.18.6.38.1.9 | ||
| Maximum burst size - side A, ATM port, in cells per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcFrwdErrCorrectionA2B | 1.3.6.1.4.1.1751.2.18.6.38.1.10 | ||
| Forward error correction scheme, ATM port side. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), eighthRate(2), quarterRate(3), halfRate(4), autoHiQ(5), auto(6), autoLoQ(7) | ||
| atmAtmSpvcVpcServiceTypeB2A | 1.3.6.1.4.1.1751.2.18.6.38.1.11 | ||
| Service type, ATM trunk side. | |||
| OBJECT-TYPE | |||
| INTEGER | ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), cbr4(7), cbr3(8), cbr2(9) | ||
| atmAtmSpvcVpcSarTypeB2A | 1.3.6.1.4.1.1751.2.18.6.38.1.12 | ||
| SAR type used in ATM adaption, ATM trunk side. | |||
| OBJECT-TYPE | |||
| INTEGER | aal5(1), aal3-4(2), aal2(3), aal1(4), null(5) | ||
| atmAtmSpvcVpcPeakCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.38.1.13 | ||
| Peak cell rate - side B, ATM trunk, in cells per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcSusCellRateB2A | 1.3.6.1.4.1.1751.2.18.6.38.1.14 | ||
| Sustained cell rate - side B, ATM trunk, in cells per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcMaxBurstSizeB2A | 1.3.6.1.4.1.1751.2.18.6.38.1.15 | ||
| Maximum burst size - side A, ATM trunk, in cells per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcFrwdErrCorrectionB2A | 1.3.6.1.4.1.1751.2.18.6.38.1.16 | ||
| Forward error correction scheme, ATM trunk side. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), eighthRate(2), quarterRate(3), halfRate(4), autoHiQ(5), auto(6), autoLoQ(7) | ||
| atmAtmSpvcVpcFlow | 1.3.6.1.4.1.1751.2.18.6.38.1.17 | ||
| Type of flow, pointToMultipointA2B is for future support. | |||
| OBJECT-TYPE | |||
| INTEGER | duplex(1), simplexA2B(2), pointToMultipointA2B(3), simplexB2A(4), pointToMultipointB2A(5) | ||
| atmAtmSpvcVpcType | 1.3.6.1.4.1.1751.2.18.6.38.1.18 | ||
| Type of connection. | |||
| OBJECT-TYPE | |||
| INTEGER | nonsecured(1), secured(2) | ||
| atmAtmSpvcVpcConnType | 1.3.6.1.4.1.1751.2.18.6.38.1.19 | ||
| The type of connection: activeSvc - attempt calls, whenever not established. passiveSvc - accept calls. | |||
| OBJECT-TYPE | |||
| INTEGER | activeSvc(1), passiveSvc(2) | ||
| atmAtmSpvcVpcLeafReference | 1.3.6.1.4.1.1751.2.18.6.38.1.20 | ||
| An arbitrary integer which serves to distinguish the mulitple leaves attached to a root of a point-to-multipoint SPVC. If point-to-point SPVC, the value should be 1. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| atmAtmSpvcVpcOperStatus | 1.3.6.1.4.1.1751.2.18.6.38.1.21 | ||
| The operation status of the connection: other - none of the types specified below. establishmentInProgress - connection is not operational, but call attempts are ongoing. connected - connection is currently operational. retriesExhausted - retry limit has been reached and call attempts have ceased. noAddressSupplied - no remote address has been configured, so no call attempts are initiated. lowerLayerDown - SPVC handler is not operational. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), establishmentInProgress(2), connected(3), retriesExhausted(4), noAddressSupplied(5), lowerLayerDown(6), waitingForCall(7), waitingForRetryTimer(8) | ||
| atmAtmSpvcVpcRowStatus | 1.3.6.1.4.1.1751.2.18.6.38.1.22 | ||
| Used to create and delete a soft PVC. When this object is set to 'active', an attempt is made to set up the soft PVC. When this object has the value 'active' and is set to another value, any setup or connection in-progress is released. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| atmAtmSpvcVpcRemoteSelectType | 1.3.6.1.4.1.1751.2.18.6.38.1.23 | ||
| Indicates whether the remote VPI values are to be used at the destination. If 'any' is used, the destination switch will choose the VPI values. In such a case, once the SPVC is connected, the value of this object will change to 'required', such that the same VPI values will continue to be used even if the connection is torn down and re-established. If the value 'required' is specified, the values: atmAtmSpvcVpcRemoteVpi and must be supplied and are used at the destination. | |||
| OBJECT-TYPE | |||
| INTEGER | required(1), any(2) | ||
| atmAtmSpvcVpcRemoteVpi | 1.3.6.1.4.1.1751.2.18.6.38.1.24 | ||
| VPI value to be used at the destination of an ATM SPVC VPC connection. Valid range is a number between 0 and 4095. If atmAtmSpvcVpcRemoteSelectType is configured as 'any', then this value is not relevant. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmAtmSpvcVpcRetryInterval | 1.3.6.1.4.1.1751.2.18.6.38.1.25 | ||
| The time to wait before attempting to establish the SVC after a previous failed call attempt. A value of 0 indicates retries will be attempted immediately. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..3600 | ||
| atmAtmSpvcVpcRetryLimit | 1.3.6.1.4.1.1751.2.18.6.38.1.26 | ||
| A maximum limit on how many retries should be attempted. A value of 0 indicates no limit. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmAtmSpvcVpcRestart | 1.3.6.1.4.1.1751.2.18.6.38.1.27 | ||
| The active SVC is released, if necessary, and a new setup procedure is begun if 'restart', otherwise, noop. | |||
| OBJECT-TYPE | |||
| INTEGER | restart(1), noop(2) | ||
| atmAtmSpvcVpcRetryFailure | 1.3.6.1.4.1.1751.2.18.6.38.1.28 | ||
| Indicates how many attempts to establish the connection have failed. It it reset whenever a connection is successfully established or the SVC is restarted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcReleaseCause | 1.3.6.1.4.1.1751.2.18.6.38.1.29 | ||
| CAUSE field value of the last RELEASE message received for this SVC. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..127 | ||
| atmAtmSpvcVpcReleaseDiag | 1.3.6.1.4.1.1751.2.18.6.38.1.30 | ||
| DIAGNOSTICS field value of the last RELEASE message received for this SVC. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..8) | ||
| atmAtmSpvcVpcRelease | 1.3.6.1.4.1.1751.2.18.6.38.1.31 | ||
| Release the connnection established on the endpoint and if the endpoint is Active, do not retry. | |||
| OBJECT-TYPE | |||
| INTEGER | release(1), noop(2) | ||
| atmAtmSpvcVpcStatsInCellCountHiA | 1.3.6.1.4.1.1751.2.18.6.38.1.32 | ||
| Valid Cells received on A - (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcStatsInCellCountLoA | 1.3.6.1.4.1.1751.2.18.6.38.1.33 | ||
| Valid Cells received on A - (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcStatsOutCellCountHiA | 1.3.6.1.4.1.1751.2.18.6.38.1.34 | ||
| Valid cells transmitted on A -(High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcStatsOutCellCountLoA | 1.3.6.1.4.1.1751.2.18.6.38.1.35 | ||
| Valid cells transmitted on A -(Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcStatsInCellCountHiB | 1.3.6.1.4.1.1751.2.18.6.38.1.36 | ||
| Valid Cells received on B - (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcStatsInCellCountLoB | 1.3.6.1.4.1.1751.2.18.6.38.1.37 | ||
| Valid Cells received on B - (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcStatsOutCellCountHiB | 1.3.6.1.4.1.1751.2.18.6.38.1.38 | ||
| Valid cells transmitted on B -(High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcStatsOutCellCountLoB | 1.3.6.1.4.1.1751.2.18.6.38.1.39 | ||
| Valid cells transmitted on B -(Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcStatsTimer | 1.3.6.1.4.1.1751.2.18.6.38.1.40 | ||
| Number of seconds stats have been collecting | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcStatsFrwdErrCrrctnRateA2B | 1.3.6.1.4.1.1751.2.18.6.38.1.41 | ||
| Displays the Forward error correction rate being used by the FEC module in the A2B direction. This field is dynamic when Auto rates are selected. In other cases, it will display the rate set by the user. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), eighthRate(2), quarterRate(3), halfRate(4) | ||
| atmAtmSpvcVpcStatsFrwdErrCrrctnRateB2A | 1.3.6.1.4.1.1751.2.18.6.38.1.42 | ||
| Displays the Forward error correction rate being used by the FEC module in the B2A direction. This field is dynamic when Auto rates are selected. In other cases, it will display the rate set by the user. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), eighthRate(2), quarterRate(3), halfRate(4) | ||
| atmAtmSpvcVpcStatsInOdometerCellCountHiA | 1.3.6.1.4.1.1751.2.18.6.38.1.43 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcStatsInOdometerCellCountLoA | 1.3.6.1.4.1.1751.2.18.6.38.1.44 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcStatsOutOdometerCellCountHiA | 1.3.6.1.4.1.1751.2.18.6.38.1.45 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcStatsOutOdometerCellCountLoA | 1.3.6.1.4.1.1751.2.18.6.38.1.46 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcStatsInOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.6.38.1.47 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcStatsInOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.6.38.1.48 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcStatsOutOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.6.38.1.49 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcStatsOutOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.6.38.1.50 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcStatsOdometerTimer | 1.3.6.1.4.1.1751.2.18.6.38.1.51 | ||
| Number of seconds since odometer was reset. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcStatsOdometerReset | 1.3.6.1.4.1.1751.2.18.6.38.1.52 | ||
| Odometer reset button. | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| atmAtmSpvcVpcViA | 1.3.6.1.4.1.1751.2.18.6.38.1.53 | ||
| VI to associate the Egress part of the B2A connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| atmAtmSpvcVpcViB | 1.3.6.1.4.1.1751.2.18.6.38.1.54 | ||
| VI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| atmAtmSpvcVpcStatsCellsDroppedA | 1.3.6.1.4.1.1751.2.18.6.38.1.55 | ||
| Cells Dropped on the Incoming side of A | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcStatsCellsTaggedA | 1.3.6.1.4.1.1751.2.18.6.38.1.56 | ||
| Cells Tagged on the Incoming side of A | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcStatsCellsDroppedB | 1.3.6.1.4.1.1751.2.18.6.38.1.57 | ||
| Cells Dropped on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcStatsCellsTaggedB | 1.3.6.1.4.1.1751.2.18.6.38.1.58 | ||
| Cells Tagged on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmAtmSpvcVpcVUNIA | 1.3.6.1.4.1.1751.2.18.6.38.1.59 | ||
| VUNI to associate the Egress part of the B2A connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmAtmSpvcVpcVUNIB | 1.3.6.1.4.1.1751.2.18.6.38.1.60 | ||
| VUNI to associate the Egress part of the A2B connection . | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmAtmSpvcVpcTrafficShapingA2B | 1.3.6.1.4.1.1751.2.18.6.38.1.61 | ||
| Traffic Shaping Support in the A2B direction. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| atmAtmSpvcVpcTrafficShapingB2A | 1.3.6.1.4.1.1751.2.18.6.38.1.62 | ||
| Traffic Shaping Support in the B2A direction. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| atmAtmSpvcVpcPriority | 1.3.6.1.4.1.1751.2.18.6.38.1.63 | ||
| Priority of SPVC - priority-1 being highest priority . | |||
| OBJECT-TYPE | |||
| INTEGER | priority-1(1), priority-2(2), priority-3(3), priority-4(4) | ||
| intfAtmPvcConnDisplayTable | 1.3.6.1.4.1.1751.2.18.6.39 | ||
| List of Pvc Connections on an Interface. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| IntfAtmConnDisplayEntry | |||
| intfAtmPvcConnDisplayEntry | 1.3.6.1.4.1.1751.2.18.6.39.1 | ||
| Gives list of pvc going towards the backplane on a particluar interface | |||
| OBJECT-TYPE | |||
| IntfAtmConnDisplayEntry | |||
| intfAtmPvcConnDisplaySlot | 1.3.6.1.4.1.1751.2.18.6.39.1.1 | ||
| Slot of the particular interface | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| intfAtmPvcConnDisplayPort | 1.3.6.1.4.1.1751.2.18.6.39.1.2 | ||
| Port of the particular interface | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| intfAtmPvcConnDisplayChannel | 1.3.6.1.4.1.1751.2.18.6.39.1.3 | ||
| Channel of the particular interface | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| intfAtmPvcConnDisplayVpi | 1.3.6.1.4.1.1751.2.18.6.39.1.4 | ||
| VPI value for connection on Intf Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| intfAtmPvcConnDisplayVci | 1.3.6.1.4.1.1751.2.18.6.39.1.5 | ||
| VCI value for connection on Intf Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| intfAtmPvcConnDisplayFlowType | 1.3.6.1.4.1.1751.2.18.6.39.1.6 | ||
| Flow type:Indicates Flow Towards the Back Plane cnctnValid: Traffic flow towards BP is enabled. cnctnNull: Traffic flow towards BP is disabled. cnctnPtmpValid: Traffic flow towards BP is enabled and it is point to multipoint connection. cnctnPtmpNull: Traffic flow towards BP is disabled and it is point to multipoint connection. | |||
| OBJECT-TYPE | |||
| INTEGER | cnctnValid(1), cnctnNull(2), cnctnPtmpValid(3), cnctnPtmpNull(4) | ||
| userServiceConfig | 1.3.6.1.4.1.1751.2.18.7 | ||
| OBJECT IDENTIFIER | |||
| sysTraps | 1.3.6.1.4.1.1751.2.18.8 | ||
| OBJECT IDENTIFIER | |||
| systemEvents | 1.3.6.1.4.1.1751.2.18.8.1 | ||
| OBJECT IDENTIFIER | |||
| systemColdStartNotify | 1.3.6.1.4.1.1751.2.18.8.1.1 | ||
| Info : System has successfully completed initialization from a complete power down stage and is ready for operation. | |||
| NOTIFICATION-TYPE | |||
| systemWarmStartNotify | 1.3.6.1.4.1.1751.2.18.8.1.2 | ||
| Info : System has successfully completed initialization from a user or other system level interrupt or restart and is ready for operation. | |||
| NOTIFICATION-TYPE | |||
| ecdBootFailureNotify | 1.3.6.1.4.1.1751.2.18.8.1.3 | ||
| Critical : System failed in the Boot (startup) procedures. Please call Support immediately to resolve the problem. | |||
| NOTIFICATION-TYPE | |||
| referenceClockFailNotify | 1.3.6.1.4.1.1751.2.18.8.1.4 | ||
| Critical : The reference clock used for the operation of the bus-based backplane has failed. Please call Support immediately to resolve the problem. | |||
| NOTIFICATION-TYPE | |||
| referenceClockClearedNotify | 1.3.6.1.4.1.1751.2.18.8.1.5 | ||
| Info : The error in the backplane reference clock has been corrected. | |||
| NOTIFICATION-TYPE | |||
| compositeClockFailNotify | 1.3.6.1.4.1.1751.2.18.8.1.6 | ||
| Critical : The composite clock has failed. Please call Support immediately to resolve the problem. | |||
| NOTIFICATION-TYPE | |||
| compositeClockClearedNotify | 1.3.6.1.4.1.1751.2.18.8.1.7 | ||
| Info : The error in the composite clock has been corrected. | |||
| NOTIFICATION-TYPE | |||
| stratumModeChangeNotify | 1.3.6.1.4.1.1751.2.18.8.1.8 | ||
| Info : The current operational status of the Stratum card has changed. | |||
| NOTIFICATION-TYPE | |||
| stratumMode | |||
| powerSupplyStatusNotify | 1.3.6.1.4.1.1751.2.18.8.1.9 | ||
| Minor : Indicates the status of the power supply. | |||
| NOTIFICATION-TYPE | |||
| powerSupplyReasonCode | |||
| softwareDownloadStatusNotify | 1.3.6.1.4.1.1751.2.18.8.1.10 | ||
| Info : Indicates the completion status of the ftp download of a software upgrade. | |||
| NOTIFICATION-TYPE | |||
| upgradeSwCopyStatus | |||
| upgradeSwErrorStatus | |||
| muxReadyConfirmReceivedNotify | 1.3.6.1.4.1.1751.2.18.8.1.11 | ||
| Info : Indicates that the MUX (AC 120) has received a MUX_READY_CONF message in response to the MUX_READY_IND message when the AC 120 is configured as the TCP client for the AC 120 to Signalling Gateway connection. | |||
| NOTIFICATION-TYPE | |||
| muxReadyConfirmNotReceivedNotify | 1.3.6.1.4.1.1751.2.18.8.1.12 | ||
| Major : If AC 120 is configured as TCP client, this trap is sent if the MUX_READY_CONF message is not received after sending the MUX_READY_IND message three times. This indicates unexpected behavior on the AC 120 to Signalling Gateway link. | |||
| NOTIFICATION-TYPE | |||
| oneWayMessageWhileInTwoWayStateNotify | 1.3.6.1.4.1.1751.2.18.8.1.13 | ||
| Major : This trap indicates that a one way message is received from the Signalling Gateway (SG) when the AC 120 is in the two way state of the keep-alive protocol on the TCP link between the AC 120 and the SG. | |||
| NOTIFICATION-TYPE | |||
| inactivityTimerExpiredNotify | 1.3.6.1.4.1.1751.2.18.8.1.14 | ||
| Major : Sent by the AC 120 when the inactivity timer of the keep-alive protocoal expires, i.e. when the AC 120 does not see a message from the Signalling Gateway on the TCP link during the time period specified by the inactivity timer value setting. | |||
| NOTIFICATION-TYPE | |||
| keepAliveTimerExpiredInLlDownStateNotify | 1.3.6.1.4.1.1751.2.18.8.1.15 | ||
| Major : Sent by the AC 120 when the keep-alive timer expires in the LLDOWN state of the keep-alive protocol, i.e. when the AC 120 does not see a keep-alive message from the Signalling Gateway on the TCP link during the time period specified by the keep-alive timer setting. | |||
| NOTIFICATION-TYPE | |||
| keepAliveTimerExpiredInOneWayStateNotify | 1.3.6.1.4.1.1751.2.18.8.1.16 | ||
| Major : Sent by the AC 120 when the keep-alive timer expires in the ONE-WAY state of the keep-alive protocol, i.e. when the AC 120 does not see a keep-alive message from the Signalling Gateway on the TCP link during the time period specified by the keep-alive timer setting. | |||
| NOTIFICATION-TYPE | |||
| completeClockFailedNotify | 1.3.6.1.4.1.1751.2.18.8.1.17 | ||
| Critical : The stratum cards have either been removed or have failed leading to no clock being provided. | |||
| NOTIFICATION-TYPE | |||
| completeClockRecoveredNotify | 1.3.6.1.4.1.1751.2.18.8.1.18 | ||
| Info : A stratum card is now available to provide a clock source. | |||
| NOTIFICATION-TYPE | |||
| backplaneCircuitryFailedNotify | 1.3.6.1.4.1.1751.2.18.8.1.19 | ||
| Critical : There is no activity on the cell bus. Please call Support immediately to resolve the problem. | |||
| NOTIFICATION-TYPE | |||
| backplaneCircuitryRecoveredNotify | 1.3.6.1.4.1.1751.2.18.8.1.20 | ||
| Info : The cpu card is able to detect activity on the cell bus. | |||
| NOTIFICATION-TYPE | |||
| remoteRebootNotify | 1.3.6.1.4.1.1751.2.18.8.1.21 | ||
| Info : Indicates the result of the requested reboot action. | |||
| NOTIFICATION-TYPE | |||
| remoteRebootReasonCode | |||
| saveConfigurationNotify | 1.3.6.1.4.1.1751.2.18.8.1.22 | ||
| Info : Indicates the result of the requested save configuration. | |||
| NOTIFICATION-TYPE | |||
| saveConfigurationReasonCode | |||
| versionConfigurationNotify | 1.3.6.1.4.1.1751.2.18.8.1.23 | ||
| Info : Indicates the completion status of the upgrade or downgrade. | |||
| NOTIFICATION-TYPE | |||
| versionConfigurationReasonCode | |||
| fileTransferStatusNotify | 1.3.6.1.4.1.1751.2.18.8.1.24 | ||
| Info : Indicates the percent complete of the current upgrade, downgrade, or ftp download in progress. | |||
| NOTIFICATION-TYPE | |||
| percentComplete | |||
| ipOrMaskInvalidNotify | 1.3.6.1.4.1.1751.2.18.8.1.25 | ||
| Response : The indicated ip address is invalid. | |||
| NOTIFICATION-TYPE | |||
| ipTypeReasonCode | |||
| alarmCardInputChangeNotify | 1.3.6.1.4.1.1751.2.18.8.1.26 | ||
| Info : Indicates that the deviceId with alarmCardReasonCode has changed its status. | |||
| NOTIFICATION-TYPE | |||
| alarmCardReasonCode | |||
| deviceId | |||
| removeConfigFilesNotify | 1.3.6.1.4.1.1751.2.18.8.1.27 | ||
| Info : Indicates the status of the removal of the configuration files. | |||
| NOTIFICATION-TYPE | |||
| removeConfigFiles | |||
| alarmCardOutputChangeNotify | 1.3.6.1.4.1.1751.2.18.8.1.28 | ||
| Info : Indicates that the deviceId with alarmCardReasonCode has changed its status. | |||
| NOTIFICATION-TYPE | |||
| alarmCardReasonCode | |||
| deviceId | |||
| alarmCardAcoChangeNotify | 1.3.6.1.4.1.1751.2.18.8.1.29 | ||
| Info : Indicates the action taken by the indicated type of the audible alarm. | |||
| NOTIFICATION-TYPE | |||
| alarmCardReasonCode | |||
| snmpCommunityStringsChangedToPublicNotify | 1.3.6.1.4.1.1751.2.18.8.1.30 | ||
| Critical : An error has been detected in the agt.pty file and the community strings have been changed to be public. | |||
| NOTIFICATION-TYPE | |||
| pnniNodeCfgNotify | 1.3.6.1.4.1.1751.2.18.8.1.31 | ||
| Info : Indicates that a PNNI Node has been created. | |||
| NOTIFICATION-TYPE | |||
| swtchNodeIndx | |||
| pnniCode | |||
| pnniNodeCfgFailNotify | 1.3.6.1.4.1.1751.2.18.8.1.32 | ||
| Info : Indicates that a PNNI Node Creation has failed. | |||
| NOTIFICATION-TYPE | |||
| swtchNodeIndx | |||
| pnniCode | |||
| pnniNodeModFailNotify | 1.3.6.1.4.1.1751.2.18.8.1.33 | ||
| Info : Indicates that a PNNI Node Modification has failed. | |||
| NOTIFICATION-TYPE | |||
| swtchNodeIndx | |||
| pnniCode | |||
| pnniNodeDelFailNotify | 1.3.6.1.4.1.1751.2.18.8.1.34 | ||
| Info : Indicates that a PNNI Node Deletion has failed. | |||
| NOTIFICATION-TYPE | |||
| swtchNodeIndx | |||
| pnniCode | |||
| pnniNodeOOSFailNotify | 1.3.6.1.4.1.1751.2.18.8.1.35 | ||
| Info : Indicates that the action of taking a PNNI Node Out of Service has failed. | |||
| NOTIFICATION-TYPE | |||
| swtchNodeIndx | |||
| pnniCode | |||
| pnniNodeISFailNotify | 1.3.6.1.4.1.1751.2.18.8.1.36 | ||
| Info : Indicates that the action of bringing a PNNI Node into service has failed. | |||
| NOTIFICATION-TYPE | |||
| swtchNodeIndx | |||
| pnniCode | |||
| pnniRtAddrCfgNotify | 1.3.6.1.4.1.1751.2.18.8.1.37 | ||
| Info : Indicates that a new PNNI Route Address has been Created. | |||
| NOTIFICATION-TYPE | |||
| swtchNodeIndx | |||
| interfaceIndex | |||
| pnniCode | |||
| pnniRtAddrCfgFailNotify | 1.3.6.1.4.1.1751.2.18.8.1.38 | ||
| Info : Indicates that a PNNI Route Address Configuration has failed. | |||
| NOTIFICATION-TYPE | |||
| swtchNodeIndx | |||
| interfaceIndex | |||
| pnniCode | |||
| pnniRtAddrModFailNotify | 1.3.6.1.4.1.1751.2.18.8.1.39 | ||
| Info : Indicates that a PNNI Route Address Modification has failed. | |||
| NOTIFICATION-TYPE | |||
| swtchNodeIndx | |||
| interfaceIndex | |||
| pnniCode | |||
| pnniRtAddrDelFailNotify | 1.3.6.1.4.1.1751.2.18.8.1.40 | ||
| Info : Indicates that a PNNI Route Address Deletion has failed. | |||
| NOTIFICATION-TYPE | |||
| swtchNodeIndx | |||
| interfaceIndex | |||
| pnniCode | |||
| pnniRtAddrAddByIlmiNotify | 1.3.6.1.4.1.1751.2.18.8.1.41 | ||
| Info : Indicates that an end system Address has been dynamically added to PNNI by ILMI. | |||
| NOTIFICATION-TYPE | |||
| swtchNodeIndx | |||
| interfaceIndex | |||
| pnniCode | |||
| pnniRtAddrDelByIlmiNotify | 1.3.6.1.4.1.1751.2.18.8.1.42 | ||
| Info : Indicates that an end system Address has been dynamically deleted from PNNI by ILMI. | |||
| NOTIFICATION-TYPE | |||
| swtchNodeIndx | |||
| interfaceIndex | |||
| pnniCode | |||
| callContrlResAllocFailNotify | 1.3.6.1.4.1.1751.2.18.8.1.43 | ||
| Info: Indicates that the configuration of call control resource allocation fails. | |||
| NOTIFICATION-TYPE | |||
| differentSystemSoftwareNotify | 1.3.6.1.4.1.1751.2.18.8.1.44 | ||
| Critical: Indicates that the primary and backup cpu's are running different versions of software. This could cause system problems since the database files will not be transferred between cpu's so a change of cpu will result. | |||
| NOTIFICATION-TYPE | |||
| primarySoftwareVersion | |||
| backupSoftwareVersion | |||
| inputPortClockFailNotify | 1.3.6.1.4.1.1751.2.18.8.1.45 | ||
| Critical : The input port clock has failed. Please call Support immediately to resolve the problem. | |||
| NOTIFICATION-TYPE | |||
| inputPortClockClearedNotify | 1.3.6.1.4.1.1751.2.18.8.1.46 | ||
| Info : The error in the input port clock has been corrected. | |||
| NOTIFICATION-TYPE | |||
| oldStratumCardNotify | 1.3.6.1.4.1.1751.2.18.8.1.47 | ||
| Critical : This trap indicates that the primary stratum card does not support this mode of operation being applied in the stratum configuration. Card must be upgraded. A default configuration is being applied to stratum | |||
| NOTIFICATION-TYPE | |||
| stratumCardMismatchNotify | 1.3.6.1.4.1.1751.2.18.8.1.48 | ||
| Critical : Indicates that the secondary stratum card does not support this mode of operation being applied to the primary stratum. Card must be upgraded. | |||
| NOTIFICATION-TYPE | |||
| tasCmprsAnnceNotify | 1.3.6.1.4.1.1751.2.18.8.1.49 | ||
| Info : Indicates the result of the requested compress announcement operation. | |||
| NOTIFICATION-TYPE | |||
| tasCmprsAnnceReasonCode | |||
| tasTrapAnnceId | |||
| tasTstLineNotify | 1.3.6.1.4.1.1751.2.18.8.1.50 | ||
| Info : Indicates the result of the requested line test initiation operation. | |||
| NOTIFICATION-TYPE | |||
| tasTstLineReasonCode | |||
| tasTrapTstId | |||
| tasMemNotify | 1.3.6.1.4.1.1751.2.18.8.1.51 | ||
| Info : Indicates the result of the requested TASM memory initiation operation. | |||
| NOTIFICATION-TYPE | |||
| tasMemReasonCode | |||
| ambientTemperatureChangeNotify | 1.3.6.1.4.1.1751.2.18.8.1.52 | ||
| Info : Indicates the ambient temperature has changed by 5 degrees centigrade since the last trap message. | |||
| NOTIFICATION-TYPE | |||
| ambientTemperature | |||
| systemInsuffMemNotify | 1.3.6.1.4.1.1751.2.18.8.1.53 | ||
| Info : no enough memory for one or more features to be turned on. | |||
| NOTIFICATION-TYPE | |||
| toneAnnceFtpStatusNotify | 1.3.6.1.4.1.1751.2.18.8.1.54 | ||
| Info : Indicates the completion status of the ftp download of a tone annoucement file. | |||
| NOTIFICATION-TYPE | |||
| toneAnnceFtpStatus | |||
| toneAnnceFtpErrorStatus | |||
| tasmControlBlockResAllocFailNotify | 1.3.6.1.4.1.1751.2.18.8.1.55 | ||
| Info: Indicates that the configuration of tasm control block resource allocation fails. Data send with the trap: tasmControlBlockAllocFailReasonCode Possible values are: res-alloc-success(1), res-alloc-Fail-announce-control-blocks-mem-unavail(2), res-alloc-Fail-digit-control-blocks-mem-unavail(3), res-alloc-Fail-line-test-control-blocks-mem-unavail(4) | |||
| NOTIFICATION-TYPE | |||
| tasmControlBlockAllocFailReasonCode | |||
| tasmCacheMemAllocFailNotify | 1.3.6.1.4.1.1751.2.18.8.1.56 | ||
| Info: Indicates that the configuration of tasm memory cache for announcement caching allocation fails. Data send with the trap:tasmCacheMemAllocFailReasonCode Possible values are: res-alloc-success(1), res-alloc-Fail-announce-cache-mem-unavail(2) | |||
| NOTIFICATION-TYPE | |||
| tasmCacheMemAllocFailReasonCode | |||
| remoteDbOperationStatusNotify | 1.3.6.1.4.1.1751.2.18.8.1.57 | ||
| Info : Indicates the completion status of remote database operation. | |||
| NOTIFICATION-TYPE | |||
| remoteDbOperationStatus | |||
| remoteDbOperationErrorStatus | |||
| sapphireInterfaceAddressAssignFailNotify | 1.3.6.1.4.1.1751.2.18.8.1.58 | ||
| Info: Indicates that the assignment of the Sapphire interface address on which TCP connect requests are sent to SoftSwitch when PSAX is configured as Client has failed. Data send with the trap: sapphireIntfAddressFailReasonCode Possible values are: address-ok(1), Address assignment succeeded fail-Ilegal-IP-address(2), Illegal IP address assigned address not matching fail-not-match-InBandManagement-Switch-CPU-IP-Address(3) In-Band Management IP or Switch IP or CPU IP address fail-Switch-or-CPU-IP-Address-unconfigured(4) Switch IP or CPU IP address unconfigured fail-InBandManagement-IP-Address-unconfigured(5) InBandManagement IP address unconfigured. | |||
| NOTIFICATION-TYPE | |||
| sapphireIntfAddressFailReasonCode | |||
| switchAlarmStatusChangeNotify | 1.3.6.1.4.1.1751.2.18.8.1.59 | ||
| Critical : Trap to notify a change in the status of the alarm on the switch. | |||
| NOTIFICATION-TYPE | |||
| switchAlarmStatus | |||
| chassisOverTempAlarmNotify | 1.3.6.1.4.1.1751.2.18.8.1.60 | ||
| Critical : Trap sent when the temperature of the chassis goes above or below a preset temperature threshold. | |||
| NOTIFICATION-TYPE | |||
| chassisOverTempAlarmReasonCode | |||
| moduleEvents | 1.3.6.1.4.1.1751.2.18.8.2 | ||
| OBJECT IDENTIFIER | |||
| cardInsertionNotify | 1.3.6.1.4.1.1751.2.18.8.2.1 | ||
| Info : The indicated slot has had a card inserted into it. | |||
| NOTIFICATION-TYPE | |||
| cardSlot | |||
| cardType | |||
| cardProtectionStatus | |||
| cardOperStatus | |||
| cardRemovedOrFailedNotify | 1.3.6.1.4.1.1751.2.18.8.2.2 | ||
| Major : The indicated slot has changed state. | |||
| NOTIFICATION-TYPE | |||
| cardSlot | |||
| lineStatusChangedNotify | 1.3.6.1.4.1.1751.2.18.8.2.3 | ||
| Major : The indicated port has had a change in the line status. | |||
| NOTIFICATION-TYPE | |||
| portId | |||
| lineStatus | |||
| firmwareDownloadSucceededNotify | 1.3.6.1.4.1.1751.2.18.8.2.4 | ||
| Info : The indicated slot has successfully completed a firmware download. | |||
| NOTIFICATION-TYPE | |||
| fwReleaseSlot | |||
| firmwareDownloadFailedNotify | 1.3.6.1.4.1.1751.2.18.8.2.5 | ||
| Minor : The indicated slot had the indicated failure during a firmware download. | |||
| NOTIFICATION-TYPE | |||
| fwReleaseSlot | |||
| firmwareDownloadReasonCode | |||
| moduleRebootNotify | 1.3.6.1.4.1.1751.2.18.8.2.6 | ||
| Major : This trap indicates that a cardType in cardSlot becomes busy and the CPU reboots it. This is different from when an I/O card is actually removed. | |||
| NOTIFICATION-TYPE | |||
| cardSlot | |||
| cardType | |||
| oc3APSStateChangeNotify | 1.3.6.1.4.1.1751.2.18.8.2.7 | ||
| Notification of a change in the APS state machine. | |||
| NOTIFICATION-TYPE | |||
| oc3APSPairPortIndex | |||
| oc3APSReasonCode | |||
| oc3APSK1K2Rx | |||
| oc3APSK1K2Tx | |||
| oc3APSSelectorState | |||
| oc3APSWorkingLineSignalStatus | |||
| oc3APSProtectionLineSignalStatus | |||
| oc3APSSwitchoverNotify | 1.3.6.1.4.1.1751.2.18.8.2.8 | ||
| Notification of a switchover in an APS pair. | |||
| NOTIFICATION-TYPE | |||
| oc3APSPairPortIndex | |||
| oc3APSReasonCode | |||
| oc3APSK1K2Rx | |||
| oc3APSK1K2Tx | |||
| oc3APSSelectorState | |||
| oc3APSWorkingLineSignalStatus | |||
| oc3APSProtectionLineSignalStatus | |||
| portModifyFailNotify | 1.3.6.1.4.1.1751.2.18.8.2.9 | ||
| Info : Notification that an attempt to modify an port parameters has failed. | |||
| NOTIFICATION-TYPE | |||
| portId | |||
| portFailureReasonCode | |||
| stratumActivitySwitchOverNotify | 1.3.6.1.4.1.1751.2.18.8.2.10 | ||
| Info : The secondary stratum card has become the primary primary card. | |||
| NOTIFICATION-TYPE | |||
| activeStratum | |||
| imaGroupStatusChangeNotify | 1.3.6.1.4.1.1751.2.18.8.2.11 | ||
| The indicated SSPPCCC has a change in the states of the IMA Group Channel | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| imaGrpChannelNeState | |||
| imaGrpChannelFeState | |||
| imaGrpChannelFailureStatus | |||
| imaGrpChannelSymmetry | |||
| interfaceEvents | 1.3.6.1.4.1.1751.2.18.8.3 | ||
| OBJECT IDENTIFIER | |||
| interfaceCreatedNotify | 1.3.6.1.4.1.1751.2.18.8.3.1 | ||
| Info : Notification that an interface has been created. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| interfaceType | |||
| interfaceDeletedNotify | 1.3.6.1.4.1.1751.2.18.8.3.2 | ||
| Info : Notification that an interface has been deleted. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| interfaceModifiedNotify | 1.3.6.1.4.1.1751.2.18.8.3.3 | ||
| Info : Notification that an interface has been modified. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| interfaceType | |||
| interfaceModifyFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.4 | ||
| Info : Notification that an attempt to modify an interface has failed. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| interfaceType | |||
| interfaceFailureReasonCode | |||
| interfaceOutOfServiceNotify | 1.3.6.1.4.1.1751.2.18.8.3.5 | ||
| Major : Notification that an interface is now out of service. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| interfaceType | |||
| interfaceInServiceNotify | 1.3.6.1.4.1.1751.2.18.8.3.6 | ||
| Info : Notification that an interface is now in service. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| interfaceType | |||
| bridgeDomainFullNotify | 1.3.6.1.4.1.1751.2.18.8.3.7 | ||
| Info : The 15 ports available for the bridge domain are being used, leaving no space for an additional port. | |||
| NOTIFICATION-TYPE | |||
| bridgeDomainNumber | |||
| bridgeDomainExceededForSlotNotify | 1.3.6.1.4.1.1751.2.18.8.3.8 | ||
| Info : The bridge domain number has been exceeded for the slot. | |||
| NOTIFICATION-TYPE | |||
| cardSlot | |||
| bridgeDomainNumberInUseNotify | 1.3.6.1.4.1.1751.2.18.8.3.9 | ||
| Info : Notification that a bridge domain number is currently in use. | |||
| NOTIFICATION-TYPE | |||
| bridgeDomainNumber | |||
| bridgeDomainInServiceNotify | 1.3.6.1.4.1.1751.2.18.8.3.10 | ||
| Info : Notification that a bridge domain is now in service. | |||
| NOTIFICATION-TYPE | |||
| bridgeDomainNumber | |||
| bridgeDomainNumberInvalidNotify | 1.3.6.1.4.1.1751.2.18.8.3.11 | ||
| Info : Indicates that this interface contains an invalid bridge domain number. In order to create a domain, associate a port with a domain, or bring an interface in service, a valid domain number must be provided. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| signalingModifyFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.12 | ||
| Info : This trap indicates that signaling has already been configured for this port and to change, you must bring all interfaces out of service -- including the channel specified in interfaceIndex. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| interfaceType | |||
| interfaceFailureReasonCode | |||
| lmiIntfStatusNotify | 1.3.6.1.4.1.1751.2.18.8.3.13 | ||
| Info : This trap indicates the status of an interface from the LMI perspective. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| frLmiOperStatus | |||
| isdnLapdDownNotify | 1.3.6.1.4.1.1751.2.18.8.3.14 | ||
| Info : This trap indicates that LAPD on the ISDN interface has gone down. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| isdnIntfDChanId | |||
| isdnLapdUpNotify | 1.3.6.1.4.1.1751.2.18.8.3.15 | ||
| Info : This trap indicates that LAPD is functional on the specified ISDN interface. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| isdnIntfDChanId | |||
| bridgeDomainTimingRelationshipNotify | 1.3.6.1.4.1.1751.2.18.8.3.16 | ||
| Info : Trap sent when one of the following relationships is violated: (1) 2 * (BridgeForwardDelay - 1.0 sec) >= BridgeMaxAge (2) BridgeMaxAge >= 2 * (BridgeHelloTime + 1.0 sec). | |||
| NOTIFICATION-TYPE | |||
| bridgeDomainNumber | |||
| timingReasonCode | |||
| ts16UsageModifyFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.17 | ||
| Info : Indicates that either TS16 has been in use for data while trying to change e1 TS16 from CCS to CAS, or signaling is on for at least one of the channels while trying to change e1 TS16 from CAS to CCS. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| interfaceFailureReasonCode | |||
| ceServiceTypeModifyFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.18 | ||
| Info : Indicates that configuring unstructured CE failed. Possible reasons are: (1) the port has been channelized; (2) the port has CAS turned on. | |||
| NOTIFICATION-TYPE | |||
| portId | |||
| interfaceFailureReasonCode | |||
| channelizationModifyFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.19 | ||
| Info : Indicates that channelizing/unchannelizing failed. Possible reasons are: (1) the port has been configured for unstructured CE; (2) the port has CAS turned on. | |||
| NOTIFICATION-TYPE | |||
| portId | |||
| interfaceFailureReasonCode | |||
| cirEmSpvcConfiguredNotify | 1.3.6.1.4.1.1751.2.18.8.3.20 | ||
| Info : Notification that an endpoint has been configured as CES SPVC endpoint. Return value - interfaceIndex | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| cirEmSpvcConfigFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.21 | ||
| Info : Notification that an attempt to configure an endpoint as CE SPVC endpoint has failed. Return values - interfaceIndex - spvcConfigFailureCode: An identified reason for failure while configuring/modifying SPVC parameters. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| spvcConfigFailureCode | |||
| cirEmSpvcDeletedNotify | 1.3.6.1.4.1.1751.2.18.8.3.22 | ||
| Info : Notification that CE SPVC configuration has been deleted. Return value - interfaceIndex | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| cirEmSpvcModifiedNotify | 1.3.6.1.4.1.1751.2.18.8.3.23 | ||
| Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| cirEmSpvcModifyFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.24 | ||
| Info : Notification that an attempt to modify a CE SPVC endpoint has failed - this trap has been obsoleted 07/01/2001. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| spvcConfigFailureCode | |||
| vbrSpvcConfiguredNotify | 1.3.6.1.4.1.1751.2.18.8.3.25 | ||
| Info : Notification that an endpoint has been configured as TE SPVC endpoint. Return value - interfaceIndex | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| vbrSpvcConfigFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.26 | ||
| Info : Notification that an attempt to configure an endpoint as TE SPVC endpoint has failed. Return values - interfaceIndex - spvcConfigFailureCode: An identified reason for failure while configuring/modifying SPVC parameters. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| spvcConfigFailureCode | |||
| vbrSpvcDeletedNotify | 1.3.6.1.4.1.1751.2.18.8.3.27 | ||
| Info : Notification that TE SPVC configuration has been deleted. Return value - interfaceIndex | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| vbrSpvcModifiedNotify | 1.3.6.1.4.1.1751.2.18.8.3.28 | ||
| Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| vbrSpvcModifyFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.29 | ||
| Info : Notification that an attempt to modify a TE SPVC endpoint has failed - this trap has been obsoleted 07/01/2001. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| spvcConfigFailureCode | |||
| atmSpvcConfiguredNotify | 1.3.6.1.4.1.1751.2.18.8.3.30 | ||
| Info : Notification that an endpoint has been configured as ATM SPVC endpoint. Return value - interfaceIndex - A-side vpi/vci value | |||
| NOTIFICATION-TYPE | |||
| atmSpvcVccIfA | |||
| atmSpvcVccVpiA | |||
| atmSpvcVccVciA | |||
| atmSpvcConfigFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.31 | ||
| Info : Notification that an attempt to configure an endpoint as ATM SPVC endpoint has failed. Return value - interfaceIndex - A-side vpi/vci value - spvcConfigFailureCode: An identified reason for failure while configuring/modifying SPVC parameters. | |||
| NOTIFICATION-TYPE | |||
| atmSpvcVccIfA | |||
| atmSpvcVccVpiA | |||
| atmSpvcVccVciA | |||
| spvcConfigFailureCode | |||
| atmSpvcDeletedNotify | 1.3.6.1.4.1.1751.2.18.8.3.32 | ||
| Info : Notification that ATM SPVC configuration has been deleted. Return value - interfaceIndex - A-side vpi/vci value | |||
| NOTIFICATION-TYPE | |||
| atmSpvcVccIfA | |||
| atmSpvcVccVpiA | |||
| atmSpvcVccVciA | |||
| atmSpvcModifiedNotify | 1.3.6.1.4.1.1751.2.18.8.3.33 | ||
| Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001. | |||
| NOTIFICATION-TYPE | |||
| atmSpvcVccIfA | |||
| atmSpvcVccVpiA | |||
| atmSpvcVccVciA | |||
| atmSpvcModifyFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.34 | ||
| Info : Notification that an attempt to modify a TE SPVC endpoint has failed - this trap has been obsoleted 07/01/2001. | |||
| NOTIFICATION-TYPE | |||
| atmSpvcVccIfA | |||
| atmSpvcVccVpiA | |||
| atmSpvcVccVciA | |||
| spvcConfigFailureCode | |||
| cRC4ModifyFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.35 | ||
| Info: Notification that modification of the CRC4 field of an E1 port failed. | |||
| NOTIFICATION-TYPE | |||
| portId | |||
| interfaceFailureReasonCode | |||
| imaGrpChannelFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.36 | ||
| Info : The imaGrpChannelFailNotify trap indicates a failure in the IMA group. The imaGrpChannelStatus field indicates the reason for the failure. | |||
| NOTIFICATION-TYPE | |||
| imaGrpChannelId | |||
| imaGrpChannelStatus | |||
| atmImaIntfFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.37 | ||
| Info : The atmImaIntfFailNotify trap indicates a failure in the physical IMA interface. The atmImaIntfStatus field indicates the reason for the failure. | |||
| NOTIFICATION-TYPE | |||
| atmImaIntfIndex | |||
| atmImaIntfStatus | |||
| imaGrpChannelClearedNotify | 1.3.6.1.4.1.1751.2.18.8.3.38 | ||
| Info : The imaGrpChannelClearedNotify trap indicates a failure has been cleared in an IMA group. The imaGrpChannelStatus field indicates the failure that has been cleared. | |||
| NOTIFICATION-TYPE | |||
| imaGrpChannelId | |||
| imaGrpChannelStatus | |||
| atmImaIntfClearedNotify | 1.3.6.1.4.1.1751.2.18.8.3.39 | ||
| Info : The atmImaIntfClearedNotify trap indicates a failure has been cleared in an IMA interface. The atmImaIntfStatus field indicates the failure that has been cleared. | |||
| NOTIFICATION-TYPE | |||
| atmImaIntfIndex | |||
| atmImaIntfStatus | |||
| pnniProtLnkUpAndAdv | 1.3.6.1.4.1.1751.2.18.8.3.40 | ||
| Info : Indicates that the Protocol Status of the PNNI Link is Up and Advertising. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| pnniCode | |||
| pnniProtLinkUpAndNotAdv | 1.3.6.1.4.1.1751.2.18.8.3.41 | ||
| Info : Indicates that the Protocol Status of the PNNI Link is Up but not Advertising. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| pnniCode | |||
| pnniProtLnkStatDown | 1.3.6.1.4.1.1751.2.18.8.3.42 | ||
| Info : Indicates that the Protocol Status of the PNNI Link is Down. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| pnniCode | |||
| pnniIntfCfgFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.43 | ||
| Info : Indicates that a PNNI Interface has failed to be Created. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| pnniCode | |||
| viprPingTrap | 1.3.6.1.4.1.1751.2.18.8.3.44 | ||
| Info : The Vipr Task is notifying Network Management of the disposition of a previous Ping Request. | |||
| NOTIFICATION-TYPE | |||
| viprSlot | |||
| viprRouterId | |||
| ipAddrNumber | |||
| pingStatusReasonCode | |||
| viprArpTrap | 1.3.6.1.4.1.1751.2.18.8.3.45 | ||
| Info : The Vipr Task is notifying Network Management of the disposition of a previous Arp Table Request. | |||
| NOTIFICATION-TYPE | |||
| viprSlot | |||
| viprRouterId | |||
| arpStatus | |||
| viprRoutingTrap | 1.3.6.1.4.1.1751.2.18.8.3.46 | ||
| Info : The Vipr Task is notifying Network Management of the disposition of a previous Routing Table Request. | |||
| NOTIFICATION-TYPE | |||
| viprSlot | |||
| viprRouterId | |||
| routingStatus | |||
| viprVpnTrap | 1.3.6.1.4.1.1751.2.18.8.3.47 | ||
| Info : Indicates success/fail of VPN level operations. | |||
| NOTIFICATION-TYPE | |||
| viprSlot | |||
| viprRouterId | |||
| vpnTrapStatus | |||
| viprIpIntfTrap | 1.3.6.1.4.1.1751.2.18.8.3.48 | ||
| Info : Indicates success/fail of IP Network Interface level operations. | |||
| NOTIFICATION-TYPE | |||
| viprSlot | |||
| viprRouterId | |||
| viprIntfId | |||
| ipIntfStatus | |||
| viprSubChanTrap | 1.3.6.1.4.1.1751.2.18.8.3.49 | ||
| Info : Indicates success/fail of Sub Channel level operations. | |||
| NOTIFICATION-TYPE | |||
| viprSlot | |||
| viprRouterId | |||
| viprIntfId | |||
| viprSubChnlId | |||
| subChanStatus | |||
| viprRtSrvTrap | 1.3.6.1.4.1.1751.2.18.8.3.50 | ||
| Info : Indicates success/fail of Vipr (Route Server) operations. | |||
| NOTIFICATION-TYPE | |||
| cardSlot | |||
| routeSrvStatus | |||
| atmSvcIntfLayer2Up | 1.3.6.1.4.1.1751.2.18.8.3.51 | ||
| Info : Indicates that an ATM Svc Interface Assured Data Link is Up. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| interfaceType | |||
| atmSvcIntfLayer2Down | 1.3.6.1.4.1.1751.2.18.8.3.52 | ||
| Info : Indicates that an ATM Svc Interface Assured Data Link is Down. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| interfaceType | |||
| apsConfigurationModifyFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.53 | ||
| Info: Notification that an attempt to modify an APS configuration has failed | |||
| NOTIFICATION-TYPE | |||
| oc3PortId | |||
| apsFailureReasonCode | |||
| viprStatRtTrap | 1.3.6.1.4.1.1751.2.18.8.3.54 | ||
| Info : Indicates success/fail of Static Route operations. | |||
| NOTIFICATION-TYPE | |||
| viprSlot | |||
| viprRouterId | |||
| viprRouteId | |||
| statRtStatus | |||
| interfaceCreateFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.55 | ||
| Info : Notification that an attempt to create an interface has failed. interfaceFailureReasonCode gives details. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| interfaceType | |||
| interfaceFailureReasonCode | |||
| virtualIntfCreatedNotify | 1.3.6.1.4.1.1751.2.18.8.3.56 | ||
| Response to creation of VI | |||
| NOTIFICATION-TYPE | |||
| virtualIntfConfigIf | |||
| virtualIntfConfigVi | |||
| virtualIntfModifiedNotify | 1.3.6.1.4.1.1751.2.18.8.3.57 | ||
| Response to modification of VI | |||
| NOTIFICATION-TYPE | |||
| virtualIntfConfigIf | |||
| virtualIntfConfigVi | |||
| virtualIntfDeleteNotify | 1.3.6.1.4.1.1751.2.18.8.3.58 | ||
| Response to deletion of VI | |||
| NOTIFICATION-TYPE | |||
| virtualIntfConfigIf | |||
| virtualIntfConfigVi | |||
| virtualIntfModifyFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.59 | ||
| Response to Modify Fail of VI, Overload pvcFailureReasonCode | |||
| NOTIFICATION-TYPE | |||
| virtualIntfConfigIf | |||
| virtualIntfConfigVi | |||
| pvcFailureReasonCode | |||
| frAtmSpvcConfiguredNotify | 1.3.6.1.4.1.1751.2.18.8.3.60 | ||
| Info : Notification that an endpoint has been configured as FR SPVC endpoint. Return values - interfaceIndex - dlci value | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| frAtmSpvcVccDlciA | |||
| frAtmSpvcConfigFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.61 | ||
| Info : Notification that an attempt to configure an endpoint as FR SPVC endpoint has failed. Return values - interfaceIndex - dlci value - spvcConfigFailureCode: An identified reason for failure while configuring/modifying SPVC parameters. | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| frAtmSpvcVccDlciA | |||
| spvcConfigFailureCode | |||
| frAtmSpvcDeletedNotify | 1.3.6.1.4.1.1751.2.18.8.3.62 | ||
| Info : Notification that FR SPVC configuration has been deleted. Return values - interfaceIndex - dlci value | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| frAtmSpvcVccDlciA | |||
| frAtmSpvcModifiedNotify | 1.3.6.1.4.1.1751.2.18.8.3.63 | ||
| Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001. Return values - interfaceIndex - dlci value | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| frAtmSpvcVccDlciA | |||
| frAtmSpvcModifyFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.64 | ||
| Info : Notification that an attempt to modify a FR SPVC endpoint has failed - this trap has been obsoleted 07/01/2001. | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| frAtmSpvcVccDlciA | |||
| spvcConfigFailureCode | |||
| atmAtmSpvcConfiguredNotify | 1.3.6.1.4.1.1751.2.18.8.3.65 | ||
| Info : Notification that an endpoint has been configured as ATM SPVC endpoint. Return values - interfaceIndex - A-side vpi/vci values - remote NSAP address | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| atmAtmSpvcVccVpiA | |||
| atmAtmSpvcVccVciA | |||
| atmAtmSpvcVccRemoteAtmPortAddr | |||
| atmAtmSpvcConfigFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.66 | ||
| Info : Notification that an attempt to configure an endpoint as ATM SPVC endpoint has failed. Return values - interfaceIndex - A-side vpi/vci values - remote NSAP address - spvcConfigFailureCode: An identified reason for failure while configuring/modifying SPVC parameters | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| atmAtmSpvcVccVpiA | |||
| atmAtmSpvcVccVciA | |||
| atmAtmSpvcVccRemoteAtmPortAddr | |||
| spvcConfigFailureCode | |||
| atmAtmSpvcDeletedNotify | 1.3.6.1.4.1.1751.2.18.8.3.67 | ||
| Info : Notification that ATM SPVC configuration has been deleted. Return values - interfaceIndex - A-side vpi/vci values - remote NSAP address | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| atmAtmSpvcVccVpiA | |||
| atmAtmSpvcVccVciA | |||
| atmAtmSpvcVccRemoteAtmPortAddr | |||
| atmAtmSpvcModifiedNotify | 1.3.6.1.4.1.1751.2.18.8.3.68 | ||
| Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001. | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| atmAtmSpvcVccVpiA | |||
| atmAtmSpvcVccVciA | |||
| atmAtmSpvcVccRemoteAtmPortAddr | |||
| atmAtmSpvcModifyFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.69 | ||
| Info : Notification that an attempt to modify a TE SPVC endpoint has failed - this trap has been obsoleted 07/01/2001. | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| atmAtmSpvcVccVpiA | |||
| atmAtmSpvcVccVciA | |||
| atmAtmSpvcVccRemoteAtmPortAddr | |||
| spvcConfigFailureCode | |||
| cirAtmSpvcConfiguredNotify | 1.3.6.1.4.1.1751.2.18.8.3.70 | ||
| Info : Notification that an endpoint has been configured as CE SPVC endpoint. Return values - interfaceIndex - remote NSAP address | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| cirAtmSpvcVccRemoteCePortAddr | |||
| cirAtmSpvcConfigFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.71 | ||
| Info : Notification that an attempt to configure an endpoint as CE SPVC endpoint has failed. Return values - interfaceIndex - remote NSAP address - spvcConfigFailureCode: An identified reason for failure while configuring/modifying SPVC parameters | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| cirAtmSpvcVccRemoteCePortAddr | |||
| spvcConfigFailureCode | |||
| cirAtmSpvcDeletedNotify | 1.3.6.1.4.1.1751.2.18.8.3.72 | ||
| Info : Notification that CE SPVC configuration has been deleted. Return values - interfaceIndex - remote NSAP address | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| cirAtmSpvcVccRemoteCePortAddr | |||
| cirAtmSpvcModifiedNotify | 1.3.6.1.4.1.1751.2.18.8.3.73 | ||
| Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001. | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| cirAtmSpvcVccRemoteCePortAddr | |||
| cirAtmSpvcModifyFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.74 | ||
| Info : Notification that an attempt to modify a CE SPVC endpoint has failed - this trap has been obsoleted 07/01/2001. | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| cirAtmSpvcVccRemoteCePortAddr | |||
| spvcConfigFailureCode | |||
| vbrAtmSpvcConfiguredNotify | 1.3.6.1.4.1.1751.2.18.8.3.75 | ||
| Info : Notification that an endpoint has been configured as TE SPVC endpoint. Return values - interfaceIndex - remote NSAP address | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| vbrAtmSpvcRemoteVbrPortAddr | |||
| vbrAtmSpvcConfigFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.76 | ||
| Info : Notification that an attempt to configure an endpoint as TE SPVC endpoint has failed. Return values - interfaceIndex - remote NSAP address - spvcConfigFailureCode: An identified reason for failure while configuring/modifying SPVC parameters | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| vbrAtmSpvcRemoteVbrPortAddr | |||
| spvcConfigFailureCode | |||
| vbrAtmSpvcDeletedNotify | 1.3.6.1.4.1.1751.2.18.8.3.77 | ||
| Info : Notification that TE SPVC configuration has been deleted. Return values - interfaceIndex - remote NSAP address | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| vbrAtmSpvcRemoteVbrPortAddr | |||
| vbrAtmSpvcModifiedNotify | 1.3.6.1.4.1.1751.2.18.8.3.78 | ||
| Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001. | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| vbrAtmSpvcRemoteVbrPortAddr | |||
| vbrAtmSpvcModifyFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.79 | ||
| Info : Notification that an attempt to modify a TE SPVC endpoint has failed - this trap has been obsoleted 07/01/2001. | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| vbrAtmSpvcRemoteVbrPortAddr | |||
| spvcConfigFailureCode | |||
| virtualUNIIntfCreatedNotify | 1.3.6.1.4.1.1751.2.18.8.3.80 | ||
| Response to creation of Virtual UNI | |||
| NOTIFICATION-TYPE | |||
| virtualUNIIfIndex | |||
| virtualUNIVUNIId | |||
| virtualUNIIntfCreateFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.81 | ||
| Info : Notification that an attempt to create an interface has failed. interfaceFailureReasonCode gives details. | |||
| NOTIFICATION-TYPE | |||
| virtualUNIIfIndex | |||
| virtualUNIVUNIId | |||
| interfaceFailureReasonCode | |||
| virtualUNIIntfModifiedNotify | 1.3.6.1.4.1.1751.2.18.8.3.82 | ||
| Notification of a failure to modify a Virtual UNI interface. | |||
| NOTIFICATION-TYPE | |||
| virtualUNIIfIndex | |||
| virtualUNIVUNIId | |||
| virtualUNIIntfDeleteNotify | 1.3.6.1.4.1.1751.2.18.8.3.83 | ||
| Response to deletion of Virtual UNI | |||
| NOTIFICATION-TYPE | |||
| virtualUNIIfIndex | |||
| virtualUNIVUNIId | |||
| virtualUNIIntfModifyFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.84 | ||
| Response to Modify Fail of Virtual UNI, Overload interfaceFailureReasonCode | |||
| NOTIFICATION-TYPE | |||
| virtualUNIIfIndex | |||
| virtualUNIVUNIId | |||
| interfaceFailureReasonCode | |||
| virtualUNIIntfOutOfServiceNotify | 1.3.6.1.4.1.1751.2.18.8.3.85 | ||
| Notification of virtualUNI Out Of Service | |||
| NOTIFICATION-TYPE | |||
| virtualUNIIfIndex | |||
| virtualUNIVUNIId | |||
| virtualUNIIntfInServiceNotify | 1.3.6.1.4.1.1751.2.18.8.3.86 | ||
| Notification of virtualUNI in Service | |||
| NOTIFICATION-TYPE | |||
| virtualUNIIfIndex | |||
| virtualUNIVUNIId | |||
| gr303IgCreatedNotify | 1.3.6.1.4.1.1751.2.18.8.3.87 | ||
| Response to creation of GR303IG | |||
| NOTIFICATION-TYPE | |||
| gr303IgId | |||
| gr303IgCreateFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.88 | ||
| Info : Notification that an attempt to create a gr303 interface group has failed. interfaceFailureReasonCode gives details. | |||
| NOTIFICATION-TYPE | |||
| gr303IgId | |||
| interfaceFailureReasonCode | |||
| gr303IgModifiedNotify | 1.3.6.1.4.1.1751.2.18.8.3.89 | ||
| Response to modification of GR303IG | |||
| NOTIFICATION-TYPE | |||
| gr303IgId | |||
| gr303IgDeleteNotify | 1.3.6.1.4.1.1751.2.18.8.3.90 | ||
| Response to deletion of GR303IG | |||
| NOTIFICATION-TYPE | |||
| gr303IgId | |||
| gr303IgModifyFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.91 | ||
| Response to Modify Fail of GR303IG, Overload interfaceFailureReasonCode | |||
| NOTIFICATION-TYPE | |||
| gr303IgId | |||
| interfaceFailureReasonCode | |||
| gr303IgOutOfServiceNotify | 1.3.6.1.4.1.1751.2.18.8.3.92 | ||
| Notification of GR303IG Out Of Service | |||
| NOTIFICATION-TYPE | |||
| gr303IgId | |||
| gr303IgInServiceNotify | 1.3.6.1.4.1.1751.2.18.8.3.93 | ||
| Notification of GR303IG in Service | |||
| NOTIFICATION-TYPE | |||
| gr303IgId | |||
| gr303IgIntfAddedNotify | 1.3.6.1.4.1.1751.2.18.8.3.94 | ||
| Response to addition of DS1 interface into GR303IG | |||
| NOTIFICATION-TYPE | |||
| gr303IntfIgId | |||
| gr303IgIntfId | |||
| gr303IgIntfAddFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.95 | ||
| Info : Notification that an attempt to add an interface has failed. interfaceFailureReasonCode gives details. | |||
| NOTIFICATION-TYPE | |||
| gr303IntfIgId | |||
| gr303IgIntfId | |||
| interfaceFailureReasonCode | |||
| gr303IgIntfDeleteNotify | 1.3.6.1.4.1.1751.2.18.8.3.96 | ||
| Response to deletion of DS1 interface from GR303IG | |||
| NOTIFICATION-TYPE | |||
| gr303IntfIgId | |||
| gr303IgIntfId | |||
| gr303TMCChanDownNotify | 1.3.6.1.4.1.1751.2.18.8.3.97 | ||
| Info : This trap indicates that TMC (LAPD) on the GR303 interface has gone down. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| gr303TMCChannelId | |||
| gr303EOCChanDownNotify | 1.3.6.1.4.1.1751.2.18.8.3.98 | ||
| Info : This trap indicates that EOC (LAPD) on the GR303 interface has gone down. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| gr303EOCChannelId | |||
| gr303TMCChanUpNotify | 1.3.6.1.4.1.1751.2.18.8.3.99 | ||
| Info : This trap indicates that TMC(LAPD) is functional on the specified GR303 interface. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| gr303TMCChannelId | |||
| gr303EOCChanUpNotify | 1.3.6.1.4.1.1751.2.18.8.3.100 | ||
| Info : This trap indicates that EOC(LAPD) is functional on the specified GR303 interface. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| gr303EOCChannelId | |||
| gr303PPSStateChangeNotify | 1.3.6.1.4.1.1751.2.18.8.3.101 | ||
| This indicates a change in the states of primary and secondary TMC/EOC (lapd) | |||
| NOTIFICATION-TYPE | |||
| gr303IgId | |||
| gr303PPSReasonCode | |||
| gr303PPSSource | |||
| gr303IgPrimaryTMCStatus | |||
| gr303IgPrimaryEOCStatus | |||
| gr303IgBackupTMCStatus | |||
| gr303IgBackupEOCStatus | |||
| gr303PPSSwitchoverNotify | 1.3.6.1.4.1.1751.2.18.8.3.102 | ||
| This notification is the result of PPS switching command which will indicate the reason code, initiator and states | |||
| NOTIFICATION-TYPE | |||
| gr303IgId | |||
| gr303PPSReasonCode | |||
| gr303PPSSource | |||
| gr303IgPrimaryTMCStatus | |||
| gr303IgPrimaryEOCStatus | |||
| gr303IgBackupTMCStatus | |||
| gr303IgBackupEOCStatus | |||
| gr303PPSCommandFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.103 | ||
| This is the notification of failure of PPS switching command | |||
| NOTIFICATION-TYPE | |||
| gr303IgId | |||
| gr303PPSReasonCode | |||
| gr303PPSSource | |||
| gr303IgPrimaryTMCStatus | |||
| gr303IgPrimaryEOCStatus | |||
| gr303IgBackupTMCStatus | |||
| gr303IgBackupEOCStatus | |||
| interfaceBandwidthChangeNotify | 1.3.6.1.4.1.1751.2.18.8.3.104 | ||
| Info : Notification that a interface has undergone reduction in bandwidth. Critical depending on Failure Reason Code. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| interfaceFailureReasonCode | |||
| atmAtmSpvpConfiguredNotify | 1.3.6.1.4.1.1751.2.18.8.3.105 | ||
| Info : Notification that an ATM SPVP has been configured at the ATM SPVC endpoint. Return values - interfaceIndex - A-side vpi value - remote NSAP Address | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| atmAtmSpvcVpcVpiA | |||
| atmAtmSpvcVpcRemoteAtmPortAddr | |||
| atmAtmSpvpConfigFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.106 | ||
| Info : Notification that an attempt to configure an ATM SPVP at the ATM SPVC endpoint has failed. Return values - interfaceIndex - A-side vpi value - remote NSAP Address - spvcConfigFailureCode: An identified reason for failure while configuring/modifying SPVC parameters. | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| atmAtmSpvcVpcVpiA | |||
| atmAtmSpvcVpcRemoteAtmPortAddr | |||
| spvcConfigFailureCode | |||
| atmAtmSpvpDeletedNotify | 1.3.6.1.4.1.1751.2.18.8.3.107 | ||
| Info : Notification that an ATM SPVP configuration has been deleted. Return values - interfaceIndex - A-side vpi value - remote NSAP Address | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| atmAtmSpvcVpcVpiA | |||
| atmAtmSpvcVpcRemoteAtmPortAddr | |||
| atmAtmSpvpModifiedNotify | 1.3.6.1.4.1.1751.2.18.8.3.108 | ||
| Info : Notification that an ATM SPVP configuration has been modified - this trap has been obsoleted 07/01/2001. | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| atmAtmSpvcVpcVpiA | |||
| atmAtmSpvcVpcRemoteAtmPortAddr | |||
| atmAtmSpvpModifyFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.109 | ||
| Info : Notification that an attempt to modify a ATM SPVP configuration has failed - this trap has been obsoleted 07/01/2001. | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| atmAtmSpvcVpcVpiA | |||
| atmAtmSpvcVpcRemoteAtmPortAddr | |||
| spvcConfigFailureCode | |||
| atmTrunkingLocalIWFConfiguredNotify | 1.3.6.1.4.1.1751.2.18.8.3.110 | ||
| Info: Local IWF Configured return value: atmTrunkingIWFIdentifier | |||
| NOTIFICATION-TYPE | |||
| atmTrunkingIWFIdentifier | |||
| atmTrunkingLocalIWFConfigFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.111 | ||
| Info: Local IWF Configured return value: atmTrunkingIWFIdentifier atmTrunkingConfigFailureCode | |||
| NOTIFICATION-TYPE | |||
| atmTrunkingIWFIdentifier | |||
| atmTrunkingConfigFailureCode | |||
| atmTrunkingLocalIWFModifiedNotify | 1.3.6.1.4.1.1751.2.18.8.3.112 | ||
| Info: configuration of Local IWF modified return value: atmTrunkingIWFIdentifier | |||
| NOTIFICATION-TYPE | |||
| atmTrunkingIWFIdentifier | |||
| atmTrunkingLocalIWFModifyFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.113 | ||
| Info: Modification of Local IWF has failed return value: atmTrunkingIWFIdentifier atmTrunkingConfigFailureCode | |||
| NOTIFICATION-TYPE | |||
| atmTrunkingIWFIdentifier | |||
| atmTrunkingConfigFailureCode | |||
| atmTrunkingLocalIWFDeletedNotify | 1.3.6.1.4.1.1751.2.18.8.3.114 | ||
| Info: configuration of Local IWF deleted return value: atmTrunkingIWFIdentifier | |||
| NOTIFICATION-TYPE | |||
| atmTrunkingIWFIdentifier | |||
| atmTrunkingLocalIWFDeleteFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.115 | ||
| Info: configuration of Local IWF can not be deleted return value: atmTrunkingIWFIdentifier atmTrunkingConfigFailureCode | |||
| NOTIFICATION-TYPE | |||
| atmTrunkingIWFIdentifier | |||
| atmTrunkingConfigFailureCode | |||
| atmTrunkingRemoteIWFConfiguredNotify | 1.3.6.1.4.1.1751.2.18.8.3.116 | ||
| Info : Notification that an ATM TRUNKING Remote IWF has been configured with return values - atmTrunkingRmtIWFIdentifier | |||
| NOTIFICATION-TYPE | |||
| atmTrunkingRemoteIWFIdentifier | |||
| atmTrunkingRemoteIWFConfigFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.117 | ||
| Info : Notification that an ATM TRUNKING Remote IWF configuration has failed with return value : - atmTrunkingRmtIWFIdentifier - atmTrunkingConfigFailureCode | |||
| NOTIFICATION-TYPE | |||
| atmTrunkingRemoteIWFIdentifier | |||
| atmTrunkingConfigFailureCode | |||
| atmTrunkingRemoteIWFDeletedNotify | 1.3.6.1.4.1.1751.2.18.8.3.118 | ||
| Info : Notification that an ATM TRUNKING Remote IWF has been deleted with return values - atmTrunkingRmtIWFIdentifier | |||
| NOTIFICATION-TYPE | |||
| atmTrunkingRemoteIWFIdentifier | |||
| atmTrunkingRemoteIWFModifiedNotify | 1.3.6.1.4.1.1751.2.18.8.3.119 | ||
| Info : Notification that an ATM TRUNKING Remote IWF has been modified with return values - atmTrunkingRmtIWFIdentifier | |||
| NOTIFICATION-TYPE | |||
| atmTrunkingRemoteIWFIdentifier | |||
| atmTrunkingRemoteIWFModifyFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.120 | ||
| Info : Notification that an ATM TRUNKING Remote IWF has been configured with return values - atmTrunkingRmtIWFIdentifier | |||
| NOTIFICATION-TYPE | |||
| atmTrunkingRemoteIWFIdentifier | |||
| atmTrunkingConfigFailureCode | |||
| atmTrunkingSigVccConfiguredNotify | 1.3.6.1.4.1.1751.2.18.8.3.121 | ||
| Info : Notification that an ATM TRUNKING Signalling VCC has been configured between Local IWF and with return values - atmTrunkingSigVccRmtIWFIdentifier - atmTrunkingSigVccIdentifier | |||
| NOTIFICATION-TYPE | |||
| atmTrunkingSigVccRmtIWFIdentifier | |||
| atmTrunkingSigVccIdentifier | |||
| atmTrunkingSigVccConfigFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.122 | ||
| Info : Notification that an ATM TRUNKING Signalling VCC configuration has failed with return value: - atmTrunkingSigVccRmtIWFIdentifier - atmTrunkingSigVccIdentifier - atmTrunkingConfigFailureCode | |||
| NOTIFICATION-TYPE | |||
| atmTrunkingSigVccRmtIWFIdentifier | |||
| atmTrunkingSigVccIdentifier | |||
| atmTrunkingConfigFailureCode | |||
| atmTrunkingSigVccDeletedNotify | 1.3.6.1.4.1.1751.2.18.8.3.123 | ||
| Info : Notification that an ATM TRUNKING Signalling VCC has been deleted with return values - atmTrunkingSigVccRmtIWFIdentifier - atmTrunkingSigVccIdentifier | |||
| NOTIFICATION-TYPE | |||
| atmTrunkingSigVccRmtIWFIdentifier | |||
| atmTrunkingSigVccIdentifier | |||
| atmTrunkingBrVccConfiguredNotify | 1.3.6.1.4.1.1751.2.18.8.3.124 | ||
| Info : Notification that an ATM TRUNKING Bearer VCC has been configured between Local IWF and with return values - atmTrunkingBrVccRmtIWFIdentifier - atmTrunkingBrVccIdentifier | |||
| NOTIFICATION-TYPE | |||
| atmTrunkingBrVccRmtIWFId | |||
| atmTrunkingBrVccId | |||
| atmTrunkingBrVccConfigFailNotify | 1.3.6.1.4.1.1751.2.18.8.3.125 | ||
| Info : Notification that an ATM TRUNKING Bearer VCC configuration has failed with return value: - atmTrunkingBrVccRmtIWFIdentifier - atmTrunkingBrVccIdentifier - atmTrunkingConfigFailureCode | |||
| NOTIFICATION-TYPE | |||
| atmTrunkingBrVccRmtIWFId | |||
| atmTrunkingBrVccId | |||
| atmTrunkingConfigFailureCode | |||
| atmTrunkingBrVccDeletedNotify | 1.3.6.1.4.1.1751.2.18.8.3.126 | ||
| Info : Notification that an ATM TRUNKING Bearer VCC has been deleted with return values - atmTrunkingBrVccRmtIWFIdentifier - atmTrunkingBrVccIdentifier | |||
| NOTIFICATION-TYPE | |||
| atmTrunkingBrVccRmtIWFId | |||
| atmTrunkingBrVccId | |||
| connectionEvents | 1.3.6.1.4.1.1751.2.18.8.4 | ||
| OBJECT IDENTIFIER | |||
| atmPvcVccReqFailNotify | 1.3.6.1.4.1.1751.2.18.8.4.1 | ||
| Response : The PVC VCC connection request between two atm interfaces failed. | |||
| NOTIFICATION-TYPE | |||
| atmPvcVccIfA | |||
| atmPvcVccVpiA | |||
| atmPvcVccVciA | |||
| atmPvcVccIfB | |||
| atmPvcVccVpiB | |||
| atmPvcVccVciB | |||
| pvcFailureReasonCode | |||
| atmPvcVpcReqFailNotify | 1.3.6.1.4.1.1751.2.18.8.4.2 | ||
| Response : The PVC VPC connection request between two atm interfaces failed. | |||
| NOTIFICATION-TYPE | |||
| atmPvcVpcIfA | |||
| atmPvcVpcVpiA | |||
| atmPvcVpcIfB | |||
| atmPvcVpcVpiB | |||
| pvcFailureReasonCode | |||
| ipAtmAppPvcVccReqFailNotify | 1.3.6.1.4.1.1751.2.18.8.4.3 | ||
| Response : The PVC VCC connection request between in-band management and an atm interface has failed. | |||
| NOTIFICATION-TYPE | |||
| ipAtmAppPvcVccDestAddrA | |||
| ipAtmAppPvcVccSubnetMaskA | |||
| ipAtmAppPvcVccIfB | |||
| ipAtmAppPvcVccVpiB | |||
| ipAtmAppPvcVccVciB | |||
| pvcFailureReasonCode | |||
| cirEmAtmPvcVccReqFailNotify | 1.3.6.1.4.1.1751.2.18.8.4.4 | ||
| Response : The PVC VCC connection request between a circuit emulation interface and an atm interface has failed. | |||
| NOTIFICATION-TYPE | |||
| cirEmAtmPvcVccIfA | |||
| cirEmAtmPvcVccIfB | |||
| cirEmAtmPvcVccVpiB | |||
| cirEmAtmPvcVccVciB | |||
| pvcFailureReasonCode | |||
| vbrAtmPvcVccReqFailNotify | 1.3.6.1.4.1.1751.2.18.8.4.5 | ||
| Response : The PVC VCC connection request between a variable-bit rate interface and an atm interface has failed. | |||
| NOTIFICATION-TYPE | |||
| vbrAtmPvcVccIfA | |||
| vbrAtmPvcVccIfB | |||
| vbrAtmPvcVccVpiB | |||
| vbrAtmPvcVccVciB | |||
| pvcFailureReasonCode | |||
| frAtmPvcVccReqFailNotify | 1.3.6.1.4.1.1751.2.18.8.4.6 | ||
| Response : The PVC VCC connection request between a frame-relay interface and an atm interface has failed. | |||
| NOTIFICATION-TYPE | |||
| frAtmPvcVccIfA | |||
| frAtmPvcVccDlciA | |||
| frAtmPvcVccIfB | |||
| frAtmPvcVccVpiB | |||
| frAtmPvcVccVciB | |||
| pvcFailureReasonCode | |||
| frFrPvcReqFailNotify | 1.3.6.1.4.1.1751.2.18.8.4.7 | ||
| Response : The PVC connection request between two frame-relay interfaces has failed. | |||
| NOTIFICATION-TYPE | |||
| frFrPvcIfA | |||
| frFrPvcDlciA | |||
| frFrPvcIfB | |||
| frFrPvcDlciB | |||
| pvcFailureReasonCode | |||
| cirEmCirEmPvcReqFailNotify | 1.3.6.1.4.1.1751.2.18.8.4.8 | ||
| Response : The PVC connection request between two circuit emulation interfaces has failed. | |||
| NOTIFICATION-TYPE | |||
| cirEmCirEmPvcIfA | |||
| cirEmCirEmPvcIfB | |||
| pvcFailureReasonCode | |||
| vbrVbrPvcReqFailNotify | 1.3.6.1.4.1.1751.2.18.8.4.9 | ||
| Response : The PVC connection request between two variable-bit rate interfaces has failed. | |||
| NOTIFICATION-TYPE | |||
| vbrVbrPvcIfA | |||
| vbrVbrPvcIfB | |||
| pvcFailureReasonCode | |||
| atmPvcVccSetupNotify | 1.3.6.1.4.1.1751.2.18.8.4.10 | ||
| Response : The PVC VCC connection between two atm interfaces has been created. | |||
| NOTIFICATION-TYPE | |||
| atmPvcVccIfA | |||
| atmPvcVccVpiA | |||
| atmPvcVccVciA | |||
| atmPvcVccIfB | |||
| atmPvcVccVpiB | |||
| atmPvcVccVciB | |||
| atmPvcVpcSetupNotify | 1.3.6.1.4.1.1751.2.18.8.4.11 | ||
| Response : The PVC VPC connection between two atm interfaces has been created. | |||
| NOTIFICATION-TYPE | |||
| atmPvcVpcIfA | |||
| atmPvcVpcVpiA | |||
| atmPvcVpcIfB | |||
| atmPvcVpcVpiB | |||
| ipAtmAppPvcVccSetupNotify | 1.3.6.1.4.1.1751.2.18.8.4.12 | ||
| Response : The PVC VCC connection between in-band management and an atm interface has been created. | |||
| NOTIFICATION-TYPE | |||
| ipAtmAppPvcVccDestAddrA | |||
| ipAtmAppPvcVccSubnetMaskA | |||
| ipAtmAppPvcVccIfB | |||
| ipAtmAppPvcVccVpiB | |||
| ipAtmAppPvcVccVciB | |||
| cirEmAtmPvcVccSetupNotify | 1.3.6.1.4.1.1751.2.18.8.4.13 | ||
| Response : The PVC VCC connection between a circuit emulation interface and an atm interface has been created. | |||
| NOTIFICATION-TYPE | |||
| cirEmAtmPvcVccIfA | |||
| cirEmAtmPvcVccIfB | |||
| cirEmAtmPvcVccVpiB | |||
| cirEmAtmPvcVccVciB | |||
| vbrAtmPvcVccSetupNotify | 1.3.6.1.4.1.1751.2.18.8.4.14 | ||
| Response : The PVC VCC connection between a variable-bit rate interface and an atm interface has been created. | |||
| NOTIFICATION-TYPE | |||
| vbrAtmPvcVccIfA | |||
| vbrAtmPvcVccIfB | |||
| vbrAtmPvcVccVpiB | |||
| vbrAtmPvcVccVciB | |||
| frAtmPvcVccSetupNotify | 1.3.6.1.4.1.1751.2.18.8.4.15 | ||
| Response : The PVC VCC connection between a frame-relay interface and an atm interface has been created. | |||
| NOTIFICATION-TYPE | |||
| frAtmPvcVccIfA | |||
| frAtmPvcVccDlciA | |||
| frAtmPvcVccIfB | |||
| frAtmPvcVccVpiB | |||
| frAtmPvcVccVciB | |||
| frFrPvcSetupNotify | 1.3.6.1.4.1.1751.2.18.8.4.16 | ||
| Response : The PVC connection between two frame-relay interfaces has been created. | |||
| NOTIFICATION-TYPE | |||
| frFrPvcIfA | |||
| frFrPvcDlciA | |||
| frFrPvcIfB | |||
| frFrPvcDlciB | |||
| cirEmCirEmPvcSetupNotify | 1.3.6.1.4.1.1751.2.18.8.4.17 | ||
| Response : The PVC connection between two circuit-emulation interfaces has been created. | |||
| NOTIFICATION-TYPE | |||
| cirEmCirEmPvcIfA | |||
| cirEmCirEmPvcIfB | |||
| vbrVbrPvcSetupNotify | 1.3.6.1.4.1.1751.2.18.8.4.18 | ||
| Response : The PVC connection between two variable-bit rate interfaces has been created. | |||
| NOTIFICATION-TYPE | |||
| vbrVbrPvcIfA | |||
| vbrVbrPvcIfB | |||
| atmPvcVccTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.19 | ||
| Response : The PVC VCC connection between two atm interfaces has been deleted. | |||
| NOTIFICATION-TYPE | |||
| atmPvcVccIfA | |||
| atmPvcVccVpiA | |||
| atmPvcVccVciA | |||
| atmPvcVccIfB | |||
| atmPvcVccVpiB | |||
| atmPvcVccVciB | |||
| atmPvcVpcTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.20 | ||
| Response : The PVC VPC connection between two atm interfaces has been deleted. | |||
| NOTIFICATION-TYPE | |||
| atmPvcVpcIfA | |||
| atmPvcVpcVpiA | |||
| atmPvcVpcIfB | |||
| atmPvcVpcVpiB | |||
| ipAtmAppPvcVccTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.21 | ||
| Response : The PVC VCC connection between in-band management and an atm interface has been deleted. | |||
| NOTIFICATION-TYPE | |||
| ipAtmAppPvcVccDestAddrA | |||
| ipAtmAppPvcVccSubnetMaskA | |||
| ipAtmAppPvcVccIfB | |||
| ipAtmAppPvcVccVpiB | |||
| ipAtmAppPvcVccVciB | |||
| cirEmAtmPvcVccTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.22 | ||
| Response : The PVC VCC connection between a circuit-emulation interface and an atm interface has been deleted. | |||
| NOTIFICATION-TYPE | |||
| cirEmAtmPvcVccIfA | |||
| cirEmAtmPvcVccIfB | |||
| cirEmAtmPvcVccVpiB | |||
| cirEmAtmPvcVccVciB | |||
| vbrAtmPvcVccTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.23 | ||
| Response : The PVC VCC connection between a variable-bit rate interface and an atm interface has been deleted. | |||
| NOTIFICATION-TYPE | |||
| vbrAtmPvcVccIfA | |||
| vbrAtmPvcVccIfB | |||
| vbrAtmPvcVccVpiB | |||
| vbrAtmPvcVccVciB | |||
| frAtmPvcVccTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.24 | ||
| Response : The PVC VCC connection between a frame-relay interface and an atm interface has been deleted. | |||
| NOTIFICATION-TYPE | |||
| frAtmPvcVccIfA | |||
| frAtmPvcVccDlciA | |||
| frAtmPvcVccIfB | |||
| frAtmPvcVccVpiB | |||
| frAtmPvcVccVciB | |||
| frFrPvcTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.25 | ||
| Response : The PVC connection between two frame-relay interfaces has been deleted. | |||
| NOTIFICATION-TYPE | |||
| frFrPvcIfA | |||
| frFrPvcDlciA | |||
| frFrPvcIfB | |||
| frFrPvcDlciB | |||
| cirEmCirEmPvcTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.26 | ||
| Response : The PVC connection between two circuit-emulation interfaces has been deleted. | |||
| NOTIFICATION-TYPE | |||
| cirEmCirEmPvcIfA | |||
| cirEmCirEmPvcIfB | |||
| vbrVbrPvcTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.27 | ||
| Response : The PVC connection between two variable-bit rate interfaces has been deleted. | |||
| NOTIFICATION-TYPE | |||
| vbrVbrPvcIfA | |||
| vbrVbrPvcIfB | |||
| bridgeBridgePvcReqFailNotify | 1.3.6.1.4.1.1751.2.18.8.4.28 | ||
| Response : The PVC connection request between two bridge interfaces has failed. | |||
| NOTIFICATION-TYPE | |||
| bridgeBridgePvcIfA | |||
| bridgeBridgePvcIfB | |||
| pvcFailureReasonCode | |||
| bridgeBridgePvcSetupNotify | 1.3.6.1.4.1.1751.2.18.8.4.29 | ||
| Response : The PVC connection between two bridge interfaces has been created. | |||
| NOTIFICATION-TYPE | |||
| bridgeBridgePvcIfA | |||
| bridgeBridgePvcIfB | |||
| bridgeBridgePvcTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.30 | ||
| Response : The PVC connection between two bridge interfaces has been deleted. | |||
| NOTIFICATION-TYPE | |||
| bridgeBridgePvcIfA | |||
| bridgeBridgePvcIfB | |||
| bridgeAtmPvcVccReqFailNotify | 1.3.6.1.4.1.1751.2.18.8.4.31 | ||
| Response : The PVC VCC connection request between a bridge interface and an atm interface has failed. | |||
| NOTIFICATION-TYPE | |||
| bridgeAtmPvcVccIfA | |||
| bridgeAtmPvcVccIfB | |||
| bridgeAtmPvcVccVpiB | |||
| bridgeAtmPvcVccVciB | |||
| pvcFailureReasonCode | |||
| bridgeAtmPvcVccSetupNotify | 1.3.6.1.4.1.1751.2.18.8.4.32 | ||
| Response : The PVC VCC connection between a bridge interface and an atm interface has been created. | |||
| NOTIFICATION-TYPE | |||
| bridgeAtmPvcVccIfA | |||
| bridgeAtmPvcVccIfB | |||
| bridgeAtmPvcVccVpiB | |||
| bridgeAtmPvcVccVciB | |||
| bridgeAtmPvcVccTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.33 | ||
| Response : The PVC VCC connection between a bridge interface and an atm interface has been deleted. | |||
| NOTIFICATION-TYPE | |||
| bridgeAtmPvcVccIfA | |||
| bridgeAtmPvcVccIfB | |||
| bridgeAtmPvcVccVpiB | |||
| bridgeAtmPvcVccVciB | |||
| cellTestReqFailNotify | 1.3.6.1.4.1.1751.2.18.8.4.34 | ||
| Response : The PVC connection request has failed. | |||
| NOTIFICATION-TYPE | |||
| cellTestIfB | |||
| cellTestVpiB | |||
| cellTestVcidB | |||
| pvcFailureReasonCode | |||
| lmiDlciStatusNotify | 1.3.6.1.4.1.1751.2.18.8.4.35 | ||
| Response : Indicates the end-to-end status of the PVC of which this DLCI is a segment of. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| dlciNumber | |||
| lmiDlciOperStatus | |||
| cirEmAtmBkPvcVccReqFailNotify | 1.3.6.1.4.1.1751.2.18.8.4.36 | ||
| Response : The DHPVC VCC backup connection request between a circuit emulation interface and an atm interface has failed. | |||
| NOTIFICATION-TYPE | |||
| cirEmAtmPvcVccIfA | |||
| cirEmAtmPvcVccIfB | |||
| cirEmAtmPvcVccVpiB | |||
| cirEmAtmPvcVccVciB | |||
| pvcFailureReasonCode | |||
| cirEmAtmBkPvcVccSetupNotify | 1.3.6.1.4.1.1751.2.18.8.4.37 | ||
| Response : The DHPVC VCC backup connection between a circuit emulation interface and an atm interface has been created. | |||
| NOTIFICATION-TYPE | |||
| cirEmAtmPvcVccIfA | |||
| cirEmAtmPvcVccIfB | |||
| cirEmAtmPvcVccVpiB | |||
| cirEmAtmPvcVccVciB | |||
| cirEmAtmBkPvcVccTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.38 | ||
| Response : The DHPVC VCC backup connection between a circuit-emulation interface and an atm interface has been deleted. | |||
| NOTIFICATION-TYPE | |||
| cirEmAtmPvcVccIfA | |||
| cirEmAtmPvcVccIfB | |||
| cirEmAtmPvcVccVpiB | |||
| cirEmAtmPvcVccVciB | |||
| vbrAtmBkPvcVccReqFailNotify | 1.3.6.1.4.1.1751.2.18.8.4.39 | ||
| Response : The DHPVC VCC backup connection request between a variable-bit rate interface and an atm interface has failed. | |||
| NOTIFICATION-TYPE | |||
| vbrAtmPvcVccIfA | |||
| vbrAtmPvcVccIfB | |||
| vbrAtmPvcVccVpiB | |||
| vbrAtmPvcVccVciB | |||
| pvcFailureReasonCode | |||
| vbrAtmBkPvcVccSetupNotify | 1.3.6.1.4.1.1751.2.18.8.4.40 | ||
| Response : The DHPVC VCC backup connection between a variable-bit rate interface and an atm interface has been created. | |||
| NOTIFICATION-TYPE | |||
| vbrAtmPvcVccIfA | |||
| vbrAtmPvcVccIfB | |||
| vbrAtmPvcVccVpiB | |||
| vbrAtmPvcVccVciB | |||
| vbrAtmBkPvcVccTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.41 | ||
| Response : The DHPVC VCC backup connection between a variable-bit rate interface and an atm interface has been deleted. | |||
| NOTIFICATION-TYPE | |||
| vbrAtmPvcVccIfA | |||
| vbrAtmPvcVccIfB | |||
| vbrAtmPvcVccVpiB | |||
| vbrAtmPvcVccVciB | |||
| atmBkPvcVccReqFailNotify | 1.3.6.1.4.1.1751.2.18.8.4.42 | ||
| Response : The DHPVC VCC backup connection request between an atm interface and an atm interface has failed. | |||
| NOTIFICATION-TYPE | |||
| atmPvcVccIfA | |||
| atmPvcVccVpiA | |||
| atmPvcVccVciA | |||
| atmPvcVccIfB | |||
| atmPvcVccVpiB | |||
| atmPvcVccVciB | |||
| pvcFailureReasonCode | |||
| atmBkPvcVccSetupNotify | 1.3.6.1.4.1.1751.2.18.8.4.43 | ||
| Response : The DHPVC VCC backup connection between an atm interface and an atm interface has been created. | |||
| NOTIFICATION-TYPE | |||
| atmPvcVccIfA | |||
| atmPvcVccVpiA | |||
| atmPvcVccVciA | |||
| atmPvcVccIfB | |||
| atmPvcVccVpiB | |||
| atmPvcVccVciB | |||
| atmBkPvcVccTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.44 | ||
| Response : The DHPVC VCC backup connection between an atm interface and an atm interface has been deleted. | |||
| NOTIFICATION-TYPE | |||
| atmPvcVccIfA | |||
| atmPvcVccVpiA | |||
| atmPvcVccVciA | |||
| atmPvcVccIfB | |||
| atmPvcVccVpiB | |||
| atmPvcVccVciB | |||
| frAtmBkPvcVccReqFailNotify | 1.3.6.1.4.1.1751.2.18.8.4.45 | ||
| Response : The DHPVC VCC backup connection request between a frame relay interface and an atm interface has failed. | |||
| NOTIFICATION-TYPE | |||
| frAtmPvcVccIfA | |||
| frAtmPvcVccDlciA | |||
| frAtmPvcVccIfB | |||
| frAtmPvcVccVpiB | |||
| frAtmPvcVccVciB | |||
| pvcFailureReasonCode | |||
| frAtmBkPvcVccSetupNotify | 1.3.6.1.4.1.1751.2.18.8.4.46 | ||
| Response : The DHPVC VCC backup connection between a frame relay interface and an atm interface has been created. | |||
| NOTIFICATION-TYPE | |||
| frAtmPvcVccIfA | |||
| frAtmPvcVccDlciA | |||
| frAtmPvcVccIfB | |||
| frAtmPvcVccVpiB | |||
| frAtmPvcVccVciB | |||
| frAtmBkPvcVccTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.47 | ||
| Response : The DHPVC VCC backup connection between a frame relay interface and an atm interface has been deleted. | |||
| NOTIFICATION-TYPE | |||
| frAtmPvcVccIfA | |||
| frAtmPvcVccDlciA | |||
| frAtmPvcVccIfB | |||
| frAtmPvcVccVpiB | |||
| frAtmPvcVccVciB | |||
| atmBkPvcVpcReqFailNotify | 1.3.6.1.4.1.1751.2.18.8.4.48 | ||
| Response : The DHPVC VPC backup connection request between an atm interface and an atm interface has failed. | |||
| NOTIFICATION-TYPE | |||
| atmPvcVpcIfA | |||
| atmPvcVpcVpiA | |||
| atmPvcVpcIfB | |||
| atmPvcVpcVpiB | |||
| pvcFailureReasonCode | |||
| atmBkPvcVpcSetupNotify | 1.3.6.1.4.1.1751.2.18.8.4.49 | ||
| Response : The DHPVC VPC backup connection between an atm interface and an atm interface has been created. | |||
| NOTIFICATION-TYPE | |||
| atmPvcVpcIfA | |||
| atmPvcVpcVpiA | |||
| atmPvcVpcIfB | |||
| atmPvcVpcVpiB | |||
| atmBkPvcVpcTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.50 | ||
| Response : The DHPVC VPC backup connection between an atm interface and an atm interface has been deleted. | |||
| NOTIFICATION-TYPE | |||
| atmPvcVpcIfA | |||
| atmPvcVpcVpiA | |||
| atmPvcVpcIfB | |||
| atmPvcVpcVpiB | |||
| bridgeAtmBkPvcVccReqFailNotify | 1.3.6.1.4.1.1751.2.18.8.4.51 | ||
| Response : The DHPVC VCC backup connection request between a bridge interface and an atm interface has failed. | |||
| NOTIFICATION-TYPE | |||
| bridgeAtmPvcVccIfA | |||
| bridgeAtmPvcVccIfB | |||
| bridgeAtmPvcVccVpiB | |||
| bridgeAtmPvcVccVciB | |||
| pvcFailureReasonCode | |||
| bridgeAtmBkPvcVccSetupNotify | 1.3.6.1.4.1.1751.2.18.8.4.52 | ||
| Response : The DHPVC VCC backup connection between a bridge interface and an atm interface has been created. | |||
| NOTIFICATION-TYPE | |||
| bridgeAtmPvcVccIfA | |||
| bridgeAtmPvcVccIfB | |||
| bridgeAtmPvcVccVpiB | |||
| bridgeAtmPvcVccVciB | |||
| bridgeAtmBkPvcVccTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.53 | ||
| Response : The DHPVC VCC backup connection between a bridge interface and an atm interface has been deleted. | |||
| NOTIFICATION-TYPE | |||
| bridgeAtmPvcVccIfA | |||
| bridgeAtmPvcVccIfB | |||
| bridgeAtmPvcVccVpiB | |||
| bridgeAtmPvcVccVciB | |||
| ipAtmBkAppPvcVccReqFailNotify | 1.3.6.1.4.1.1751.2.18.8.4.54 | ||
| Response : The DHPVC VCC backup connection request between an in-band management interface and an atm interface has failed. | |||
| NOTIFICATION-TYPE | |||
| ipAtmAppPvcVccDestAddrA | |||
| ipAtmAppPvcVccSubnetMaskA | |||
| ipAtmAppPvcVccIfB | |||
| ipAtmAppPvcVccVpiB | |||
| ipAtmAppPvcVccVciB | |||
| pvcFailureReasonCode | |||
| ipAtmBkAppPvcVccSetupNotify | 1.3.6.1.4.1.1751.2.18.8.4.55 | ||
| Response : The DHPVC VCC backup connection between an in-band management interface and an atm interface has been created. | |||
| NOTIFICATION-TYPE | |||
| ipAtmAppPvcVccDestAddrA | |||
| ipAtmAppPvcVccSubnetMaskA | |||
| ipAtmAppPvcVccIfB | |||
| ipAtmAppPvcVccVpiB | |||
| ipAtmAppPvcVccVciB | |||
| ipAtmBkAppPvcVccTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.56 | ||
| Response : The DHPVC VCC backup connection between an in-band management interface and an atm interface has been deleted. | |||
| NOTIFICATION-TYPE | |||
| ipAtmAppPvcVccDestAddrA | |||
| ipAtmAppPvcVccSubnetMaskA | |||
| ipAtmAppPvcVccIfB | |||
| ipAtmAppPvcVccVpiB | |||
| ipAtmAppPvcVccVciB | |||
| cirEmAtmSpvcVccSetUpNotify | 1.3.6.1.4.1.1751.2.18.8.4.57 | ||
| Response : Notification that a SPVC connection between CE and ATM endpoints has been made successfully. Return values - A-side interfaceIndex B-side interfaceIndex B-side vpi/vci | |||
| NOTIFICATION-TYPE | |||
| cirEmAtmSpvcVccIfA | |||
| cirEmAtmSpvcVccIfB | |||
| cirEmAtmSpvcVccVpiB | |||
| cirEmAtmSpvcVccVciB | |||
| vbrAtmSpvcVccSetUpNotify | 1.3.6.1.4.1.1751.2.18.8.4.58 | ||
| Response : Notification that a SPVC connection between TE and ATM endpoints has been made successfully. Return values - A-side interfaceIndex B-side interfaceIndex B-side vpi/vci | |||
| NOTIFICATION-TYPE | |||
| vbrAtmSpvcVccIfA | |||
| vbrAtmSpvcVccIfB | |||
| vbrAtmSpvcVccVpiB | |||
| vbrAtmSpvcVccVciB | |||
| atmSpvcVccSetUpNotify | 1.3.6.1.4.1.1751.2.18.8.4.59 | ||
| Response : Notification that a SPVC connection between ATM and ATM endpoints has been made successfully. Return values - A-side interfaceIndex A-side vpi/vci B-side interfaceIndex B-side vpi/vci | |||
| NOTIFICATION-TYPE | |||
| atmSpvcVccIfA | |||
| atmSpvcVccVpiA | |||
| atmSpvcVccVciA | |||
| atmSpvcVccIfB | |||
| atmSpvcVccVpiB | |||
| atmSpvcVccVciB | |||
| cirEmAtmSpvcVccTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.60 | ||
| Response : Notification that a SPVC connection between CE and ATM endpoints has been deleted. Return values - A-side interfaceIndex B-side interfaceIndex B-side vpi/vci | |||
| NOTIFICATION-TYPE | |||
| cirEmAtmSpvcVccIfA | |||
| cirEmAtmSpvcVccIfB | |||
| cirEmAtmSpvcVccVpiB | |||
| cirEmAtmSpvcVccVciB | |||
| vbrAtmSpvcVccTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.61 | ||
| Response : Notification that a SPVC connection between TE and ATM endpoints has been deleted. Return values - A-side interfaceIndex B-side interfaceIndex B-side vpi/vci | |||
| NOTIFICATION-TYPE | |||
| vbrAtmSpvcVccIfA | |||
| vbrAtmSpvcVccIfB | |||
| vbrAtmSpvcVccVpiB | |||
| vbrAtmSpvcVccVciB | |||
| atmSpvcVccTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.62 | ||
| Response : Notification that a SPVC connection between ATM and ATM endpoints has been deleted. Return values - A-side interfaceIndex A-side vpi/vci B-side interfaceIndex B-side vpi/vci | |||
| NOTIFICATION-TYPE | |||
| atmSpvcVccIfA | |||
| atmSpvcVccVpiA | |||
| atmSpvcVccVciA | |||
| atmSpvcVccIfB | |||
| atmSpvcVccVpiB | |||
| atmSpvcVccVciB | |||
| oamTestReqFailNotify | 1.3.6.1.4.1.1751.2.18.8.4.63 | ||
| Response : OAM loopback test request has failed. | |||
| NOTIFICATION-TYPE | |||
| oamTestIfB | |||
| oamTestVpiB | |||
| oamTestVciB | |||
| oamTestFailureReasonCode | |||
| oamActDeactResultNotify | 1.3.6.1.4.1.1751.2.18.8.4.64 | ||
| Response : the final status of oam Activation-Deactivation request. | |||
| NOTIFICATION-TYPE | |||
| oamActDeactIfB | |||
| oamActDeactVpiB | |||
| oamActDeactVciB | |||
| oamActDeactResultCode | |||
| frAtmSpvcVccSetUpNotify | 1.3.6.1.4.1.1751.2.18.8.4.65 | ||
| Response : Notification that a SPVC connection between FR and ATM endpoints has been made successfully. Return values - A-side interfaceIndex A-side dlci B-side interfaceIndex B-side vpi/vci | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| frAtmSpvcVccDlciA | |||
| frAtmSpvcVccIfB | |||
| frAtmSpvcVccVpiB | |||
| frAtmSpvcVccVciB | |||
| frAtmSpvcVccTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.66 | ||
| Response : Notification that a SPVC connection between FR and ATM endpoints has been deleted. Return values - A-side interfaceIndex A-side dlci B-side interfaceIndex B-side vpi/vci | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| frAtmSpvcVccDlciA | |||
| frAtmSpvcVccIfB | |||
| frAtmSpvcVccVpiB | |||
| frAtmSpvcVccVciB | |||
| atmAtmSpvcVccSetUpNotify | 1.3.6.1.4.1.1751.2.18.8.4.67 | ||
| Response : Notification that a SPVC connection between ATM and ATM endpoints has been made successfully. Return values - A-side interfaceIndex A-side vpi/vci Remote NSAP address B-side interfaceIndex B-side vpi/vci | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| atmAtmSpvcVccVpiA | |||
| atmAtmSpvcVccVciA | |||
| atmAtmSpvcVccRemoteAtmPortAddr | |||
| atmAtmSpvcVccIfB | |||
| atmAtmSpvcVccVpiB | |||
| atmAtmSpvcVccVciB | |||
| atmAtmSpvcVccTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.68 | ||
| Response : Notification that a SPVC connection between ATM and ATM endpoints has been deleted. Return values - A-side interfaceIndex A-side vpi/vci Remote NSAP address B-side interfaceIndex B-side vpi/vci | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| atmAtmSpvcVccVpiA | |||
| atmAtmSpvcVccVciA | |||
| atmAtmSpvcVccRemoteAtmPortAddr | |||
| atmAtmSpvcVccIfB | |||
| atmAtmSpvcVccVpiB | |||
| atmAtmSpvcVccVciB | |||
| cirAtmSpvcVccSetUpNotify | 1.3.6.1.4.1.1751.2.18.8.4.69 | ||
| Response : Notification that a SPVC connection between CE and ATM endpoints has been made successfully. Return values - A-side interfaceIndex Remote NSAP address B-side interfaceIndex B-side vpi/vci | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| cirAtmSpvcVccRemoteCePortAddr | |||
| cirAtmSpvcVccIfB | |||
| cirAtmSpvcVccVpiB | |||
| cirAtmSpvcVccVciB | |||
| cirAtmSpvcVccTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.70 | ||
| Response : Notification that a SPVC connection between CE and ATM endpoints has been deleted. Return values - A-side interfaceIndex Remote NSAP address B-side interfaceIndex B-side vpi/vci | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| cirAtmSpvcVccRemoteCePortAddr | |||
| cirAtmSpvcVccIfB | |||
| cirAtmSpvcVccVpiB | |||
| cirAtmSpvcVccVciB | |||
| vbrAtmSpvcSetUpNotify | 1.3.6.1.4.1.1751.2.18.8.4.71 | ||
| Response : Notification that a SPVC connection between TE and ATM endpoints has been made successfully. Return values - A-side interfaceIndex Remote NSAP address B-side interfaceIndex B-side vpi/vci | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| vbrAtmSpvcRemoteVbrPortAddr | |||
| vbrAtmSpvcIfB | |||
| vbrAtmSpvcVpiB | |||
| vbrAtmSpvcVciB | |||
| vbrAtmSpvcTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.72 | ||
| Response : Notification that a SPVC connection between TE and ATM endpoints has been deleted. Return values - A-side interfaceIndex Remote NSAP address B-side interfaceIndex B-side vpi/vci | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| vbrAtmSpvcRemoteVbrPortAddr | |||
| vbrAtmSpvcIfB | |||
| vbrAtmSpvcVpiB | |||
| vbrAtmSpvcVciB | |||
| aal2TrunkConfigSetupNotify | 1.3.6.1.4.1.1751.2.18.8.4.73 | ||
| Response : The PVC VCC connection for aal2 trunk | |||
| NOTIFICATION-TYPE | |||
| aal2TrunkConfigIf | |||
| aal2TrunkConfigVpi | |||
| aal2TrunkConfigVci | |||
| aal2TrunkConfigTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.74 | ||
| Response : The PVC VCC AAL2 Trunk has been deleted | |||
| NOTIFICATION-TYPE | |||
| aal2TrunkConfigIf | |||
| aal2TrunkConfigVpi | |||
| aal2TrunkConfigVci | |||
| aal2TrunkConfigReqFailNotify | 1.3.6.1.4.1.1751.2.18.8.4.75 | ||
| Response : The PVC VCC aal2 trunk could not be setup | |||
| NOTIFICATION-TYPE | |||
| aal2TrunkConfigIf | |||
| aal2TrunkConfigVpi | |||
| aal2TrunkConfigVci | |||
| pvcFailureReasonCode | |||
| gr303Aal2PvcConfigReqFailNotify | 1.3.6.1.4.1.1751.2.18.8.4.76 | ||
| Response : The GR303 PVC VCC on aal2 trunk could not be setup | |||
| NOTIFICATION-TYPE | |||
| gr303Aal2PvcVccGr303IgId | |||
| gr303Aal2PvcVccGr303CallRef | |||
| gr303Aal2PvcVccIfB | |||
| gr303Aal2PvcVccVpiB | |||
| gr303Aal2PvcVccVciB | |||
| gr303Aal2PvcVccAal2Cid | |||
| gr303Aal2PvcSetUpNotify | 1.3.6.1.4.1.1751.2.18.8.4.77 | ||
| Response : Notification that a monitor connection between Gr303 call ref and ATM AAL2 CID has been made successfully. | |||
| NOTIFICATION-TYPE | |||
| gr303Aal2PvcVccGr303IgId | |||
| gr303Aal2PvcVccGr303CallRef | |||
| gr303Aal2PvcVccIfB | |||
| gr303Aal2PvcVccVpiB | |||
| gr303Aal2PvcVccVciB | |||
| gr303Aal2PvcVccAal2Cid | |||
| gr303Aal2PvcTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.78 | ||
| Response : Notification that a monitor connection between Gr303 call ref and ATM AAL2 CID has been deleted | |||
| NOTIFICATION-TYPE | |||
| gr303Aal2PvcVccGr303IgId | |||
| gr303Aal2PvcVccGr303CallRef | |||
| gr303Aal2PvcVccIfB | |||
| gr303Aal2PvcVccVpiB | |||
| gr303Aal2PvcVccVciB | |||
| gr303Aal2PvcVccAal2Cid | |||
| dhpvcChangeNotify | 1.3.6.1.4.1.1751.2.18.8.4.79 | ||
| This will indicate the changes in a dual home pvc. This will have 2 indications. One is when there is a switchover which indicate the last state and the new one (eg Prim To Bkup) Secondly there will also be an indication when there is a state change which will indicate the new state only (eg Primary is Active and in No Fail Condition and Backup is Passive and in Fail Condition). In case of state change the traffic path is not changed but it indicates the state of the passive path. | |||
| NOTIFICATION-TYPE | |||
| interfaceIndex | |||
| atmVpi | |||
| atmVci | |||
| pvcFailureReasonCode | |||
| atmAtmSpvcVpcSetUpNotify | 1.3.6.1.4.1.1751.2.18.8.4.80 | ||
| Response : Notification that a SPVP connection between ATM and ATM endpoints has been made successfully. | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| atmAtmSpvcVpcVpiA | |||
| atmAtmSpvcVpcRemoteAtmPortAddr | |||
| atmAtmSpvcVpcIfB | |||
| atmAtmSpvcVccVpiB | |||
| atmAtmSpvcVpcTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.81 | ||
| Response : Notification that a SPVP connection between ATM and ATM endpoints has been deleted. | |||
| NOTIFICATION-TYPE | |||
| spvcAddrIfA | |||
| atmAtmSpvcVccVpiA | |||
| atmAtmSpvcVpcRemoteAtmPortAddr | |||
| atmAtmSpvcVpcIfB | |||
| atmAtmSpvcVpcVpiB | |||
| iptResultNotify | 1.3.6.1.4.1.1751.2.18.8.4.82 | ||
| Response : the final status of interface protection request. | |||
| NOTIFICATION-TYPE | |||
| iptGroupId | |||
| iptLogicalIntfId | |||
| iptResultCode | |||
| pgtResultNotify | 1.3.6.1.4.1.1751.2.18.8.4.83 | ||
| Response : the final status of interface protection group request. | |||
| NOTIFICATION-TYPE | |||
| pgtGroupId | |||
| pgtResultCode | |||
| atmTrunkingSigVccSetUpNotify | 1.3.6.1.4.1.1751.2.18.8.4.84 | ||
| Response : Notification that a ATM Trunking Signalling VCC has been setup successfully. Return values - atmTrunkingSigVccRmtIWFIdentifier atmTrunkingSigVccIdentifier | |||
| NOTIFICATION-TYPE | |||
| atmTrunkingSigVccRmtIWFIdentifier | |||
| atmTrunkingSigVccIdentifier | |||
| atmTrunkingSigVccTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.85 | ||
| Response : Notification that a ATM Trunking Signalling VCC has been torn down successfully. Return values - atmTrunkingSigVccRmtIWFIdentifier atmTrunkingSigVccIdentifier | |||
| NOTIFICATION-TYPE | |||
| atmTrunkingSigVccRmtIWFIdentifier | |||
| atmTrunkingSigVccIdentifier | |||
| atmTrunkingBrVccSetUpNotify | 1.3.6.1.4.1.1751.2.18.8.4.86 | ||
| Response : Notification that a ATM Trunking Bearer VCC has been setup successfully. Return values - atmTrunkingBrVccRmtIWFIdentifier atmTrunkingBrVccIdentifier | |||
| NOTIFICATION-TYPE | |||
| atmTrunkingBrVccRmtIWFId | |||
| atmTrunkingBrVccId | |||
| atmTrunkingBrVccTearDownNotify | 1.3.6.1.4.1.1751.2.18.8.4.87 | ||
| Response : Notification that a ATM Trunking Bearer VCC has been torn down successfully. Return values - atmTrunkingBrVccRmtIWFIdentifier atmTrunkingBrVccIdentifier | |||
| NOTIFICATION-TYPE | |||
| atmTrunkingBrVccRmtIWFId | |||
| atmTrunkingBrVccId | |||
| sysStatistics | 1.3.6.1.4.1.1751.2.18.9 | ||
| OBJECT IDENTIFIER | |||
| equipStatistics | 1.3.6.1.4.1.1751.2.18.10 | ||
| OBJECT IDENTIFIER | |||
| ds3PortStatsTable | 1.3.6.1.4.1.1751.2.18.10.1 | ||
| Table of statisics for a DS3 port | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Ds3PortStatsEntry | |||
| ds3PortStatsEntry | 1.3.6.1.4.1.1751.2.18.10.1.1 | ||
| Row definition for the DS3 port statistics table | |||
| OBJECT-TYPE | |||
| Ds3PortStatsEntry | |||
| ds3PortStatsId | 1.3.6.1.4.1.1751.2.18.10.1.1.1 | ||
| Port ID - Slot/Port (SSPP) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ds3PortStatsTimer | 1.3.6.1.4.1.1751.2.18.10.1.1.2 | ||
| The number of seconds that have elapsed since the beginning of the current error-measurement period. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ds3PortStatsCurrentSEFSs | 1.3.6.1.4.1.1751.2.18.10.1.1.3 | ||
| severely errored framing seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ds3PortStatsCurrentLCVs | 1.3.6.1.4.1.1751.2.18.10.1.1.4 | ||
| Line coding violations encountered | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ds3PortStatsCurrentLESs | 1.3.6.1.4.1.1751.2.18.10.1.1.5 | ||
| Line errored seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ds1PortStatsTable | 1.3.6.1.4.1.1751.2.18.10.2 | ||
| Table of statisics for a DS1 port | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Ds1PortStatsEntry | |||
| ds1PortStatsEntry | 1.3.6.1.4.1.1751.2.18.10.2.1 | ||
| Row definition for the DS1 port statistics table | |||
| OBJECT-TYPE | |||
| Ds1PortStatsEntry | |||
| ds1PortStatsId | 1.3.6.1.4.1.1751.2.18.10.2.1.1 | ||
| Port ID - Slot/Port (SSPP) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ds1PortStatsTimer | 1.3.6.1.4.1.1751.2.18.10.2.1.2 | ||
| The number of seconds that have elapsed since the beginning of the current error-measurement period. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ds1PortStatsCurrentESs | 1.3.6.1.4.1.1751.2.18.10.2.1.3 | ||
| The number of Errored Seconds, encountered by a DS1 interface. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ds1PortStatsCurrentSESs | 1.3.6.1.4.1.1751.2.18.10.2.1.4 | ||
| The number of Severely Errored Seconds encoun- tered by a DS1 interface. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ds1PortStatsCurrentLCVs | 1.3.6.1.4.1.1751.2.18.10.2.1.5 | ||
| The number of Line Code Violations (LCVs) en- countered by a DS1 interface. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oc3PortStatsTable | 1.3.6.1.4.1.1751.2.18.10.3 | ||
| Table of statisics for a OC3 port | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Oc3PortStatsEntry | |||
| oc3PortStatsEntry | 1.3.6.1.4.1.1751.2.18.10.3.1 | ||
| Row definition for the OC3 port statistics table | |||
| OBJECT-TYPE | |||
| Oc3PortStatsEntry | |||
| oc3PortStatsId | 1.3.6.1.4.1.1751.2.18.10.3.1.1 | ||
| Port ID - Slot/Port (SSPP) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oc3PortStatsSectionBip8Errs | 1.3.6.1.4.1.1751.2.18.10.3.1.2 | ||
| section sublayer BIP8 errors. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oc3PortStatsLineBip8Errs | 1.3.6.1.4.1.1751.2.18.10.3.1.3 | ||
| line sublayer BIP8 errors. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oc3PortStatsPathBip8Errs | 1.3.6.1.4.1.1751.2.18.10.3.1.4 | ||
| path sublayer BIP8 errors. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oc3PortStatsLineFebeCount | 1.3.6.1.4.1.1751.2.18.10.3.1.5 | ||
| line sublayer FEBE count. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oc3PortStatsPathFebeCount | 1.3.6.1.4.1.1751.2.18.10.3.1.6 | ||
| path sublayer FEBE count. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oc3PortStatsTimer | 1.3.6.1.4.1.1751.2.18.10.3.1.7 | ||
| The number of seconds that have elapsed since the beginning of the current error-measurement period. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| msPortStatsTable | 1.3.6.1.4.1.1751.2.18.10.4 | ||
| Table of statisics for a MS port | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MsPortStatsEntry | |||
| msPortStatsEntry | 1.3.6.1.4.1.1751.2.18.10.4.1 | ||
| Row definition for the MS port statistics table | |||
| OBJECT-TYPE | |||
| MsPortStatsEntry | |||
| msPortStatsId | 1.3.6.1.4.1.1751.2.18.10.4.1.1 | ||
| Port ID - Slot/Port (SSPP) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| msPortStatsFrameErrors | 1.3.6.1.4.1.1751.2.18.10.4.1.4 | ||
| P-bit severely errored seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| msPortStatsOutOfFrameSeconds | 1.3.6.1.4.1.1751.2.18.10.4.1.5 | ||
| severely errored framing seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| msPortStatsTimer | 1.3.6.1.4.1.1751.2.18.10.4.1.6 | ||
| The number of seconds that have elapsed since the beginning of the current error-measurement period. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| e3PortStatsTable | 1.3.6.1.4.1.1751.2.18.10.5 | ||
| Table of statisics for a E3 port | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| E3PortStatsEntry | |||
| e3PortStatsEntry | 1.3.6.1.4.1.1751.2.18.10.5.1 | ||
| Row definition for the E3 port statistics table | |||
| OBJECT-TYPE | |||
| E3PortStatsEntry | |||
| e3PortStatsId | 1.3.6.1.4.1.1751.2.18.10.5.1.1 | ||
| Port ID - Slot/Port (SSPP) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| e3PortStatsTimer | 1.3.6.1.4.1.1751.2.18.10.5.1.2 | ||
| The number of seconds that have elapsed since the beginning of the current error-measurement period. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| e3PortStatsCurrentSEFSs | 1.3.6.1.4.1.1751.2.18.10.5.1.3 | ||
| severely errored framing seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| e3PortStatsCurrentLCVs | 1.3.6.1.4.1.1751.2.18.10.5.1.4 | ||
| Line coding violations encountered | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| e3PortStatsCurrentLESs | 1.3.6.1.4.1.1751.2.18.10.5.1.5 | ||
| Line errored seconds | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| e1PortStatsTable | 1.3.6.1.4.1.1751.2.18.10.6 | ||
| Table of statisics for a E1 port | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| E1PortStatsEntry | |||
| e1PortStatsEntry | 1.3.6.1.4.1.1751.2.18.10.6.1 | ||
| Row definition for the E1 port statistics table | |||
| OBJECT-TYPE | |||
| E1PortStatsEntry | |||
| e1PortStatsId | 1.3.6.1.4.1.1751.2.18.10.6.1.1 | ||
| Port ID - Slot/Port (SSPP) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| e1PortStatsTimer | 1.3.6.1.4.1.1751.2.18.10.6.1.2 | ||
| The number of seconds that have elapsed since the beginning of the current error-measurement period. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| e1PortStatsCurrentESs | 1.3.6.1.4.1.1751.2.18.10.6.1.3 | ||
| The number of Errored Seconds, encountered by a E1 interface. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| e1PortStatsCurrentSESs | 1.3.6.1.4.1.1751.2.18.10.6.1.4 | ||
| The number of Severely Errored Seconds encoun- tered by a E1 interface. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| e1PortStatsCurrentLCVs | 1.3.6.1.4.1.1751.2.18.10.6.1.5 | ||
| The number of Line Code Violations (LCVs) en- countered by a E1 interface. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ethernetPortStatsTable | 1.3.6.1.4.1.1751.2.18.10.7 | ||
| Statisics for a collection of ethernet-like interfaces attached to a particular system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| EthernetPortStatsEntry | |||
| ethernetPortStatsEntry | 1.3.6.1.4.1.1751.2.18.10.7.1 | ||
| Statistics for a particular interface to an ethernet-like medium. | |||
| OBJECT-TYPE | |||
| EthernetPortStatsEntry | |||
| ethernetPortStatsId | 1.3.6.1.4.1.1751.2.18.10.7.1.1 | ||
| An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same interface as identified by the same value of ethernetPortId. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ethernetPortStatsTimer | 1.3.6.1.4.1.1751.2.18.10.7.1.2 | ||
| Time, in seconds, since last reset. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ethernetPortStatsAlignmentErrors | 1.3.6.1.4.1.1751.2.18.10.7.1.3 | ||
| A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ethernetPortStatsFCSErrors | 1.3.6.1.4.1.1751.2.18.10.7.1.4 | ||
| A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ethernetPortStatsSingleCollisionFrames | 1.3.6.1.4.1.1751.2.18.10.7.1.5 | ||
| A count of successfully transmitted frames on a particular interface for which trnasmission is inhibited by exactly one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, IfOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the ethernetPortStatsMulitipleCollisionFrames object. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ethernetPortStatsMultipleCollisionFrames | 1.3.6.1.4.1.1751.2.18.10.7.1.6 | ||
| A count of successfully transmitted frames on a particular interface for which trnasmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, IfOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the ethernetPortStatsSingleCollisionFrames object. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ethernetPortStatsSQETestErrors | 1.3.6.1.4.1.1751.2.18.10.7.1.7 | ||
| A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section 7.2.2.2.4 of ANSI/IEEE 802.3-1985 and its generation is described in section 7.2.4.6 of the same document. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ethernetPortStatsDeferredTransmissions | 1.3.6.1.4.1.1751.2.18.10.7.1.8 | ||
| A count of frames for which the first transmission attempt on a particluar interface is delayed because the medium is busy. the count represented by an instance of this object does not include frames involved in collisions. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ethernetPortStatsLateCollisions | 1.3.6.1.4.1.1751.2.18.10.7.1.9 | ||
| The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. Five hundred and twelve bit-times corresponds to 51.2 microseconds on a 10 Mbit/s system. A (late) collision included in a count represented by an instance of this object is also considered as a (generic) collision for purposes of other collision-related statistics. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ethernetPortStatsExcessiveCollisions | 1.3.6.1.4.1.1751.2.18.10.7.1.10 | ||
| A count of frames for which transmission on a particular interface fails due to excessive collisions. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ethernetPortStatsInternalMacTransmitErrors | 1.3.6.1.4.1.1751.2.18.10.7.1.11 | ||
| A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the ethernetPortStatsLateCollisions object, the ethernetPortStatsExcessiveCollisions object, or the ethernetPortStatsCarrierSenseErrors object. The precise meaning of the count represented by an instance of this object is implementation- specific. In particular, an instance of this object may represent a count of transmission errors on a particular interface that are not otherwise counted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ethernetPortStatsCarrierSenseErrors | 1.3.6.1.4.1.1751.2.18.10.7.1.12 | ||
| The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. The count represented by an instance of this object is incremented at most once per transmission attempt, even if the carrier sense condition fluctuates during a transmission attempt. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ethernetPortStatsFrameTooLongs | 1.3.6.1.4.1.1751.2.18.10.7.1.13 | ||
| A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incremented when the frameTooLong status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ethernetPortStatsInternalMacReceiveErrors | 1.3.6.1.4.1.1751.2.18.10.7.1.14 | ||
| A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the ethernetPortStatsFrameTooLongs object, the ethernetPortStatsAlignmentErrors object, or the ethernetPortStatsFCSErrors object. The precise meaning of the count represented by an instance of this object is implementation- specific. In particular, an instance of this object may represent a count of receive errors on a particular interface that are not otherwise counted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oc3APSPairStatsTable | 1.3.6.1.4.1.1751.2.18.10.8 | ||
| Table of statisics for a OC3 port | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Oc3APSPairStatsEntry | |||
| oc3APSPairStatsEntry | 1.3.6.1.4.1.1751.2.18.10.8.1 | ||
| Row definition for the OC3 port statistics table | |||
| OBJECT-TYPE | |||
| Oc3APSPairStatsEntry | |||
| oc3APSPairStatsId | 1.3.6.1.4.1.1751.2.18.10.8.1.1 | ||
| Working Port ID - Slot/Port (SSPP) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oc3APSPairWorkingSFDuration | 1.3.6.1.4.1.1751.2.18.10.8.1.2 | ||
| Duration in seconds for which the Work port has been in Signal Failure state | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oc3APSPairWorkingSDDuration | 1.3.6.1.4.1.1751.2.18.10.8.1.3 | ||
| Duration in seconds for which the Work port has been in Signal Degradation state | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oc3APSPairProtectionSFDuration | 1.3.6.1.4.1.1751.2.18.10.8.1.4 | ||
| Duration in seconds for which the Prot port has been in Signal Failure state | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oc3APSPairProtectionSDDuration | 1.3.6.1.4.1.1751.2.18.10.8.1.5 | ||
| Duration in seconds for which the Prot port has been in Signal Degradation state | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oc3APSPairTransmitK1K2Bytes | 1.3.6.1.4.1.1751.2.18.10.8.1.6 | ||
| The k1 / k2 bytes being transmitted by the prot port to the remote port. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(2) | ||
| oc3APSPairReceiveK1K2Bytes | 1.3.6.1.4.1.1751.2.18.10.8.1.7 | ||
| k1 / k2 bytes from the received SONET header on the protection port. k1 / k2 are used for the APS communication protocol. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(2) | ||
| oc3APSPairSwitchOverCount | 1.3.6.1.4.1.1751.2.18.10.8.1.8 | ||
| Number of times the APS pair has switched over since last configuration. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprVpnStatsTable | 1.3.6.1.4.1.1751.2.18.10.9 | ||
| Statistics collected per vpn based | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ViprVpnStatsEntry | |||
| viprVpnStatsEntry | 1.3.6.1.4.1.1751.2.18.10.9.1 | ||
| Statistics collected per vpn based | |||
| OBJECT-TYPE | |||
| ViprVpnStatsEntry | |||
| viprVpnStatsTimer | 1.3.6.1.4.1.1751.2.18.10.9.1.1 | ||
| A timeout value in which the RS Module must reply to statistics requests. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprVpnStatsIcmpOutEchoRPs | 1.3.6.1.4.1.1751.2.18.10.9.1.2 | ||
| Echo Reply | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprVpnStatsIcmpOutDestURs | 1.3.6.1.4.1.1751.2.18.10.9.1.3 | ||
| Destination unreachable | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprVpnStatsIcmpOutSrcQ | 1.3.6.1.4.1.1751.2.18.10.9.1.4 | ||
| Source Quenches | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprVpnStatsIcmpOutRedirects | 1.3.6.1.4.1.1751.2.18.10.9.1.5 | ||
| Redirect message type | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprVpnStatsIcmpOutEchoRQs | 1.3.6.1.4.1.1751.2.18.10.9.1.6 | ||
| Echo Requests | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprVpnStatsIcmpOutTimeXs | 1.3.6.1.4.1.1751.2.18.10.9.1.7 | ||
| Time exceeded | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprVpnStatsIcmpOutParamps | 1.3.6.1.4.1.1751.2.18.10.9.1.8 | ||
| Parameter problem | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprVpnStatsIcmpOutTimeRQs | 1.3.6.1.4.1.1751.2.18.10.9.1.9 | ||
| Timestamp requests | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprVpnStatsIcmpOutTimeRPs | 1.3.6.1.4.1.1751.2.18.10.9.1.10 | ||
| Timestamp replies | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprVpnStatsIcmpOutInfoRQs | 1.3.6.1.4.1.1751.2.18.10.9.1.11 | ||
| Information Request | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprVpnStatsIcmpOutInfoRPs | 1.3.6.1.4.1.1751.2.18.10.9.1.12 | ||
| Echo Reply | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprVpnStatsIcmpOutMaskRQs | 1.3.6.1.4.1.1751.2.18.10.9.1.13 | ||
| Mask Request | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprVpnStatsIcmpOutMaskRPs | 1.3.6.1.4.1.1751.2.18.10.9.1.14 | ||
| Mask Reply | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprVpnStatsIcmpOutErrors | 1.3.6.1.4.1.1751.2.18.10.9.1.15 | ||
| unrecognized ICMP type | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprVpnStatsIcmpInErrors | 1.3.6.1.4.1.1751.2.18.10.9.1.16 | ||
| error in received icmp message | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprVpnStatsIcmpInEchoRQs | 1.3.6.1.4.1.1751.2.18.10.9.1.17 | ||
| received echo request | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprVpnStatsIcmpInAddrMasks | 1.3.6.1.4.1.1751.2.18.10.9.1.18 | ||
| received mask request | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprVpnStatsIcmpInAddrMaskReps | 1.3.6.1.4.1.1751.2.18.10.9.1.19 | ||
| received mask reply | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprVpnStatsIcmpInEchoReps | 1.3.6.1.4.1.1751.2.18.10.9.1.20 | ||
| received echo replies | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprVpnStatsIcmpInDestUnreachs | 1.3.6.1.4.1.1751.2.18.10.9.1.21 | ||
| received destination unreacheable message | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprVpnStatsIcmpInSrcQuenchs | 1.3.6.1.4.1.1751.2.18.10.9.1.22 | ||
| received source quench | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprVpnStatsIcmpInTimeExcds | 1.3.6.1.4.1.1751.2.18.10.9.1.23 | ||
| received time exceeded message | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprVpnStatsIcmpInParamProbs | 1.3.6.1.4.1.1751.2.18.10.9.1.24 | ||
| received parameter problem message | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprVpnStatsIcmpInTimeStamps | 1.3.6.1.4.1.1751.2.18.10.9.1.25 | ||
| received time stamp request | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprVpnStatsIcmpInTimeStampsReps | 1.3.6.1.4.1.1751.2.18.10.9.1.26 | ||
| received time stamp replies | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| intfStatistics | 1.3.6.1.4.1.1751.2.18.11 | ||
| OBJECT IDENTIFIER | |||
| atmIfStatsTable | 1.3.6.1.4.1.1751.2.18.11.1 | ||
| Table of statistics for an atmUni interface | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmIfStatsEntry | |||
| atmIfStatsEntry | 1.3.6.1.4.1.1751.2.18.11.1.1 | ||
| Row definition for the atmUni statistics table | |||
| OBJECT-TYPE | |||
| AtmIfStatsEntry | |||
| atmIfStatsId | 1.3.6.1.4.1.1751.2.18.11.1.1.1 | ||
| Interface index (SSPPCCC) to the atmUni statistics table | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmIfStatsValidCellsInHi | 1.3.6.1.4.1.1751.2.18.11.1.1.2 | ||
| Number of valid cells received on the channel - High Word | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmIfStatsValidCellsInLo | 1.3.6.1.4.1.1751.2.18.11.1.1.3 | ||
| Number of valid cells received on the channel - low Word | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmIfStatsErroredCellsIn | 1.3.6.1.4.1.1751.2.18.11.1.1.4 | ||
| Number of errored cells received on the channel | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmIfStatsMismatchedCellsIn | 1.3.6.1.4.1.1751.2.18.11.1.1.5 | ||
| Number of Vpi/Vci translation errors on input cells. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmIfStatsNullCellsOutHi | 1.3.6.1.4.1.1751.2.18.11.1.1.6 | ||
| Number of null cells sent out on the channel - High Word | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmIfStatsNullCellsOutLo | 1.3.6.1.4.1.1751.2.18.11.1.1.7 | ||
| Number of null cells sent out on the channel - Low Word | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmIfStatsValidCellsOutHi | 1.3.6.1.4.1.1751.2.18.11.1.1.8 | ||
| Number of valid cells sent out on the channel - High Word | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmIfStatsValidCellsOutLo | 1.3.6.1.4.1.1751.2.18.11.1.1.9 | ||
| Number of valid cells sent out on the channel - Low Word | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmIfStatsTimer | 1.3.6.1.4.1.1751.2.18.11.1.1.10 | ||
| Time, in seconds, since last reset. | |||
| OBJECT-TYPE | |||
| Integer32 | 1..899 | ||
| frUniStatsTable | 1.3.6.1.4.1.1751.2.18.11.2 | ||
| Table of statistics for a Frame Relay UNI Interface | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| FrUniStatsEntry | |||
| frUniStatsEntry | 1.3.6.1.4.1.1751.2.18.11.2.1 | ||
| Row definition for the Frame Realy UNI statistics table | |||
| OBJECT-TYPE | |||
| FrUniStatsEntry | |||
| frUniStatsId | 1.3.6.1.4.1.1751.2.18.11.2.1.1 | ||
| Interface index (SSPPCCC) to the frame relay UNI statistics table | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| frUniStatsTimer | 1.3.6.1.4.1.1751.2.18.11.2.1.9 | ||
| Time, in seconds, since last reset. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..899 | ||
| frUniStatsCellsMismatched | 1.3.6.1.4.1.1751.2.18.11.2.1.10 | ||
| number of cells not matched to provisioned DLCIs. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frUniStatsErroredFrames | 1.3.6.1.4.1.1751.2.18.11.2.1.11 | ||
| number of errored frames. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frUniStatsCellsEncodedHi | 1.3.6.1.4.1.1751.2.18.11.2.1.12 | ||
| number of cells encoded - (High order portion). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frUniStatsCellsEncodedLo | 1.3.6.1.4.1.1751.2.18.11.2.1.13 | ||
| number of cells encoded - (Low order portion). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frUniStatsFramesEncodedHi | 1.3.6.1.4.1.1751.2.18.11.2.1.14 | ||
| number of frames encoded - (High order portion). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frUniStatsFramesEncodedLo | 1.3.6.1.4.1.1751.2.18.11.2.1.15 | ||
| number of frames encoded - (Low order portion). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frUniStatsCellsDecodedHi | 1.3.6.1.4.1.1751.2.18.11.2.1.16 | ||
| number of cells decoded - (High order portion). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frUniStatsCellsDecodedLo | 1.3.6.1.4.1.1751.2.18.11.2.1.17 | ||
| number of cells decoded - (Low order portion). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frUniStatsFramesDecodedHi | 1.3.6.1.4.1.1751.2.18.11.2.1.18 | ||
| number of frames decoded - (High order portion). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frUniStatsFramesDecodedLo | 1.3.6.1.4.1.1751.2.18.11.2.1.19 | ||
| number of frames decoded - (Low order portion). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frUniStatsAAL5Errors | 1.3.6.1.4.1.1751.2.18.11.2.1.20 | ||
| number of aal5 PDUs with invalid byte count or CRC-32. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmIfStatsTable | 1.3.6.1.4.1.1751.2.18.11.3 | ||
| Table of statistics for an cirEm interface | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| CirEmIfStatsEntry | |||
| cirEmIfStatsEntry | 1.3.6.1.4.1.1751.2.18.11.3.1 | ||
| Row definition for the cirEm statistics table | |||
| OBJECT-TYPE | |||
| CirEmIfStatsEntry | |||
| cirEmIfStatsId | 1.3.6.1.4.1.1751.2.18.11.3.1.1 | ||
| Interface index (SSPPCCC) to the cirEm statistics table | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| cirEmIfStatsCellsEncodedHi | 1.3.6.1.4.1.1751.2.18.11.3.1.2 | ||
| Incoming cells from the outside media to the i/o port | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmIfStatsCellsEncodedLo | 1.3.6.1.4.1.1751.2.18.11.3.1.3 | ||
| Incoming cells from the outside media to the i/o port | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmIfStatsCellsDecodedHi | 1.3.6.1.4.1.1751.2.18.11.3.1.4 | ||
| Outgoing cells from the i/o port to the outside media | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmIfStatsCellsDecodedLo | 1.3.6.1.4.1.1751.2.18.11.3.1.5 | ||
| Outgoing cells from the i/o port to the outside media | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmIfStatsTimer | 1.3.6.1.4.1.1751.2.18.11.3.1.6 | ||
| Time, in seconds, since last reset. | |||
| OBJECT-TYPE | |||
| Integer32 | 1..899 | ||
| vbrIfStatsTable | 1.3.6.1.4.1.1751.2.18.11.4 | ||
| Table of statistics for an vbr interface | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| VbrIfStatsEntry | |||
| vbrIfStatsEntry | 1.3.6.1.4.1.1751.2.18.11.4.1 | ||
| Row definition for the vbr statistics table | |||
| OBJECT-TYPE | |||
| VbrIfStatsEntry | |||
| vbrIfStatsId | 1.3.6.1.4.1.1751.2.18.11.4.1.1 | ||
| Interface index (SSPPCCC) to the vbr statistics table | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| vbrIfStatsCellsEncodedHi | 1.3.6.1.4.1.1751.2.18.11.4.1.2 | ||
| Incoming cells from the outside media to the i/o port | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrIfStatsCellsEncodedLo | 1.3.6.1.4.1.1751.2.18.11.4.1.3 | ||
| Incoming cells from the outside media to the i/o port | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrIfStatsCellsDecodedHi | 1.3.6.1.4.1.1751.2.18.11.4.1.4 | ||
| Outgoing cells from the i/o port to the outside media | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrIfStatsCellsDecodedLo | 1.3.6.1.4.1.1751.2.18.11.4.1.5 | ||
| Outgoing cells from the i/o port to the outside media | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrIfStatsTimer | 1.3.6.1.4.1.1751.2.18.11.4.1.6 | ||
| Time, in seconds, since last reset. | |||
| OBJECT-TYPE | |||
| Integer32 | 1..899 | ||
| frLmiStatsTable | 1.3.6.1.4.1.1751.2.18.11.5 | ||
| Table of statistics for a Frame Relay LMI Interface | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| FrLmiStatsEntry | |||
| frLmiStatsEntry | 1.3.6.1.4.1.1751.2.18.11.5.1 | ||
| Row definition for the Frame Realy LMI statistics table | |||
| OBJECT-TYPE | |||
| FrLmiStatsEntry | |||
| frLmiStatsId | 1.3.6.1.4.1.1751.2.18.11.5.1.1 | ||
| Interface index (SSPPCCC) to the frame relay LMI statistics table | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| frLmiStatsEnqRx | 1.3.6.1.4.1.1751.2.18.11.5.1.2 | ||
| number of STATUS ENQ messages received | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frLmiStatsEnqTx | 1.3.6.1.4.1.1751.2.18.11.5.1.3 | ||
| number of STATUS ENQ messages transmitted | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frLmiStatsStatusRx | 1.3.6.1.4.1.1751.2.18.11.5.1.4 | ||
| number of STATUS messages received | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frLmiStatsStatusTx | 1.3.6.1.4.1.1751.2.18.11.5.1.5 | ||
| number of STATUS messages transmitted | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frLmiStatsAsyncRx | 1.3.6.1.4.1.1751.2.18.11.5.1.6 | ||
| number of ASYNC STATUS messages received | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frLmiStatsAsyncTx | 1.3.6.1.4.1.1751.2.18.11.5.1.7 | ||
| number of ASYNC STATUS messages transmitted | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frLmiStatsPktDisc | 1.3.6.1.4.1.1751.2.18.11.5.1.8 | ||
| The number of lmi messages discarded due to invalid length, receive sequence numbers, or other error. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frLmiStatsT391Exp | 1.3.6.1.4.1.1751.2.18.11.5.1.9 | ||
| Link integrity verification polling timer expiry | |||
| OBJECT-TYPE | |||
| INTEGER | 1..899 | ||
| frLmiStatsT392Exp | 1.3.6.1.4.1.1751.2.18.11.5.1.10 | ||
| Polling verification timer expiry | |||
| OBJECT-TYPE | |||
| INTEGER | 1..899 | ||
| frLmiStatsLinkReset | 1.3.6.1.4.1.1751.2.18.11.5.1.11 | ||
| Number of times interface operational status was in service after system startup. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..899 | ||
| frLmiStatsTimer | 1.3.6.1.4.1.1751.2.18.11.5.1.12 | ||
| Time since last reset for statistics - in seconds | |||
| OBJECT-TYPE | |||
| INTEGER | 1..899 | ||
| bridgeStatsTable | 1.3.6.1.4.1.1751.2.18.11.6 | ||
| Table of statistics for a bridge interface. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| BridgeStatsEntry | |||
| bridgeStatsEntry | 1.3.6.1.4.1.1751.2.18.11.6.1 | ||
| Row definition for the bridge interface statistics table | |||
| OBJECT-TYPE | |||
| BridgeStatsEntry | |||
| bridgeStatsId | 1.3.6.1.4.1.1751.2.18.11.6.1.1 | ||
| Interface index (SSPPCCC) to the bridge | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeStatsTimer | 1.3.6.1.4.1.1751.2.18.11.6.1.2 | ||
| Time, in seconds, since last reset. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeStatsBasePortDelayExceededDiscardsHi | 1.3.6.1.4.1.1751.2.18.11.6.1.8 | ||
| The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges. High-order 32 bits. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeStatsBasePortDelayExceededDiscardsLo | 1.3.6.1.4.1.1751.2.18.11.6.1.9 | ||
| The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges. Low-order 32 bits. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeStatsBasePortMtuExceededDiscardsHi | 1.3.6.1.4.1.1751.2.18.11.6.1.10 | ||
| The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges. High-order 32 bits. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeStatsBasePortMtuExceededDiscardsLo | 1.3.6.1.4.1.1751.2.18.11.6.1.11 | ||
| The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges. Low-order 32 bits. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeStatsTpPortInFramesHi | 1.3.6.1.4.1.1751.2.18.11.6.1.12 | ||
| The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames. High-order 32 bits. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeStatsTpPortInFramesLo | 1.3.6.1.4.1.1751.2.18.11.6.1.13 | ||
| The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames. Low-order 32 bits. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeStatsTpPortOutFramesHi | 1.3.6.1.4.1.1751.2.18.11.6.1.14 | ||
| The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames. High-order 32 bits. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeStatsTpPortOutFramesLo | 1.3.6.1.4.1.1751.2.18.11.6.1.15 | ||
| The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames. Low-order 32 bits. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeStatsTpPortInDiscardsHi | 1.3.6.1.4.1.1751.2.18.11.6.1.16 | ||
| Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process. High-order 32 bits. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeStatsTpPortInDiscardsLo | 1.3.6.1.4.1.1751.2.18.11.6.1.17 | ||
| Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process. Low-order 32 bits. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dbCirEmIfStatsTable | 1.3.6.1.4.1.1751.2.18.11.7 | ||
| Table of statistics for a dbCirEm interface. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DbCirEmIfStatsEntry | |||
| dbCirEmIfStatsEntry | 1.3.6.1.4.1.1751.2.18.11.7.1 | ||
| Row definition for the dbCirEm statistics table. | |||
| OBJECT-TYPE | |||
| DbCirEmIfStatsEntry | |||
| dbCirEmIfStatsId | 1.3.6.1.4.1.1751.2.18.11.7.1.1 | ||
| Interface index (SSPPCCC) to the dbCirEm statistics table. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| dbCirEmIfStatsCellsEncodedHi | 1.3.6.1.4.1.1751.2.18.11.7.1.2 | ||
| Incoming cells from the outside media to the i/o port. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dbCirEmIfStatsCellsEncodedLo | 1.3.6.1.4.1.1751.2.18.11.7.1.3 | ||
| Incoming cells from the outside media to the i/o port. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dbCirEmIfStatsCellsDecodedHi | 1.3.6.1.4.1.1751.2.18.11.7.1.4 | ||
| Outgoing cells from the i/o port to the outside media. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dbCirEmIfStatsCellsDecodedLo | 1.3.6.1.4.1.1751.2.18.11.7.1.5 | ||
| Outgoing cells from the i/o port to the outside media. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dbCirEmIfStatsTimer | 1.3.6.1.4.1.1751.2.18.11.7.1.6 | ||
| Time, in seconds, since last reset. | |||
| OBJECT-TYPE | |||
| Integer32 | 1..899 | ||
| atmImaStatsTable | 1.3.6.1.4.1.1751.2.18.11.8 | ||
| Table of statistics for an atmIma interface. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmImaStatsEntry | |||
| atmImaStatsEntry | 1.3.6.1.4.1.1751.2.18.11.8.1 | ||
| Row definition for the atmIma statistics table. | |||
| OBJECT-TYPE | |||
| AtmImaStatsEntry | |||
| atmImaStatsId | 1.3.6.1.4.1.1751.2.18.11.8.1.1 | ||
| Interface index (SSPPCCC) to the atmIma statistics table. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmImaStatsTimer | 1.3.6.1.4.1.1751.2.18.11.8.1.2 | ||
| Time, in seconds, since last reset. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmImaStatsImaViolations | 1.3.6.1.4.1.1751.2.18.11.8.1.3 | ||
| ICP violations: count of errored, invalid or missing ICP cells during non-SES-IMA condition. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmImaStatsOifAnomalies | 1.3.6.1.4.1.1751.2.18.11.8.1.4 | ||
| The number of OIF anomalies during non-SES-IMA condition at the near-end. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmImaStatsNeTxNumFailures | 1.3.6.1.4.1.1751.2.18.11.8.1.5 | ||
| The number of times a near-end transmit failure alarm condition has been entered on this link. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmImaStatsNeRxNumFailures | 1.3.6.1.4.1.1751.2.18.11.8.1.6 | ||
| The number of times a near-end receive failure alarm condition has been entered on this link (i.e., LIF, LODS, Mis-Connected, RDI-IMA). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmImaStatsFeTxNumFailures | 1.3.6.1.4.1.1751.2.18.11.8.1.7 | ||
| The number of times a far-end transmit failure alarm condition has been entered on this link. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmImaStatsFeRxNumFailures | 1.3.6.1.4.1.1751.2.18.11.8.1.8 | ||
| The number of times a far-end receive failure alarm condition has been entered on this link (i.e. LIF, LODS, Mis-Connected, RDI-IMA). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmImaStatsTxStuffs | 1.3.6.1.4.1.1751.2.18.11.8.1.9 | ||
| Counts of stuff events inserted in the transmit direction. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmImaStatsRxStuffs | 1.3.6.1.4.1.1751.2.18.11.8.1.10 | ||
| Counts of stuff events detected in the receive direction. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ilmiStatsTable | 1.3.6.1.4.1.1751.2.18.11.9 | ||
| Table of statistics for an ILMI enabled interface. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| IlmiStatsEntry | |||
| ilmiStatsEntry | 1.3.6.1.4.1.1751.2.18.11.9.1 | ||
| Row definition for the ILMI statistics table. | |||
| OBJECT-TYPE | |||
| IlmiStatsEntry | |||
| ilmiStatsId | 1.3.6.1.4.1.1751.2.18.11.9.1.1 | ||
| Interface index (SSPPCCC) for the ILMI interface. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| ilmiStatsTimer | 1.3.6.1.4.1.1751.2.18.11.9.1.2 | ||
| Time, in seconds, since last statistics reset. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ilmiStatsLinkResets | 1.3.6.1.4.1.1751.2.18.11.9.1.3 | ||
| Times connectivity has toggled between down and up. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ilmiStatsAttachPtChanged | 1.3.6.1.4.1.1751.2.18.11.9.1.4 | ||
| Times Attachment Point change was detected. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ilmiStatsAttachPtVerified | 1.3.6.1.4.1.1751.2.18.11.9.1.5 | ||
| Times Attachment Point was verified successfully. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ilmiStatsSecureLnkProcInit | 1.3.6.1.4.1.1751.2.18.11.9.1.6 | ||
| Times Secure Link Procedure was initiated. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ilmiStatsColdStartRx | 1.3.6.1.4.1.1751.2.18.11.9.1.7 | ||
| Times Cold Start trap was received. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ilmiStatsColdStartTx | 1.3.6.1.4.1.1751.2.18.11.9.1.8 | ||
| Times Cold Start trap was transmitted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ilmiStatsPduRx | 1.3.6.1.4.1.1751.2.18.11.9.1.9 | ||
| ilmi pdu received | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ilmiStatsPduTx | 1.3.6.1.4.1.1751.2.18.11.9.1.10 | ||
| ilmi pdu transmitted | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ilmiStatsReqTimeouts | 1.3.6.1.4.1.1751.2.18.11.9.1.11 | ||
| Times getRequest of any type timed out. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ilmiStatsPacketDisc | 1.3.6.1.4.1.1751.2.18.11.9.1.12 | ||
| Times a received packet was discarded. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprStatsTable | 1.3.6.1.4.1.1751.2.18.11.10 | ||
| The table which holds viprStatsEntry data. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ViprStatsEntry | |||
| viprStatsEntry | 1.3.6.1.4.1.1751.2.18.11.10.1 | ||
| A table entry for VPN related statistics information. | |||
| OBJECT-TYPE | |||
| ViprStatsEntry | |||
| viprStatsReset | 1.3.6.1.4.1.1751.2.18.11.10.1.1 | ||
| A SNMP set action to reset VPN related statistics info. | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| viprStatsPacketsRxHi | 1.3.6.1.4.1.1751.2.18.11.10.1.2 | ||
| Good packets received from the backplane | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprStatsPacketsRxLo | 1.3.6.1.4.1.1751.2.18.11.10.1.3 | ||
| Good packets received from the backplane | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprStatsPacketsTxHi | 1.3.6.1.4.1.1751.2.18.11.10.1.4 | ||
| packets transmitted to the backplane | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprStatsPacketsTxLo | 1.3.6.1.4.1.1751.2.18.11.10.1.5 | ||
| packets transmitted to the backplane | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprStatsMismatchCrcHi | 1.3.6.1.4.1.1751.2.18.11.10.1.6 | ||
| packets received has been dropped due to a mismached CRC | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprStatsMismatchCrcLo | 1.3.6.1.4.1.1751.2.18.11.10.1.7 | ||
| packets received has been dropped due to a mismached CRC | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprStatsInsufficientPcktsHi | 1.3.6.1.4.1.1751.2.18.11.10.1.8 | ||
| packet received length is greater than the number of cells received | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprStatsInsufficientPcktsLo | 1.3.6.1.4.1.1751.2.18.11.10.1.9 | ||
| packet received length is greater than the number of cells received | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprStatsExceedAal5CellsHi | 1.3.6.1.4.1.1751.2.18.11.10.1.10 | ||
| number of cells received is greater than the actual length of the aal5 | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprStatsExceedAal5CellsLo | 1.3.6.1.4.1.1751.2.18.11.10.1.11 | ||
| number of cells received is greater than the actual length of the aal5 | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprStatsPrototypeErrorsHi | 1.3.6.1.4.1.1751.2.18.11.10.1.12 | ||
| unrecognized encapsulation type | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprStatsPrototypeErrorsLo | 1.3.6.1.4.1.1751.2.18.11.10.1.13 | ||
| unrecognized encapsulation type | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprStatsArpProtoRxHi | 1.3.6.1.4.1.1751.2.18.11.10.1.14 | ||
| ARP received | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprStatsArpProtoRxLo | 1.3.6.1.4.1.1751.2.18.11.10.1.15 | ||
| ARP received | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprStatsIPInHdrErrorsHi | 1.3.6.1.4.1.1751.2.18.11.10.1.16 | ||
| IP packeted received has a bad header | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprStatsIPInHdrErrorsLo | 1.3.6.1.4.1.1751.2.18.11.10.1.17 | ||
| IP packeted received has a bad header | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprStatsIPInAddrErrorsHi | 1.3.6.1.4.1.1751.2.18.11.10.1.18 | ||
| IP packeted received has a bad IP Address | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprStatsIPInAddrErrorsLo | 1.3.6.1.4.1.1751.2.18.11.10.1.19 | ||
| IP packeted received has a bad IP Address | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| virtualIntfStatsTable | 1.3.6.1.4.1.1751.2.18.11.11 | ||
| Table of Virtual Interfaces Configurations | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| VirtualIntfStatsEntry | |||
| virtualIntfStatsEntry | 1.3.6.1.4.1.1751.2.18.11.11.1 | ||
| Index is the Interface and the Virutal Interface | |||
| OBJECT-TYPE | |||
| VirtualIntfStatsEntry | |||
| virtualIntfStatsIf | 1.3.6.1.4.1.1751.2.18.11.11.1.1 | ||
| Interface index for side A of an ATM-to-ATM PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| virtualIntfStatsVi | 1.3.6.1.4.1.1751.2.18.11.11.1.2 | ||
| VI value. Def Val is 1 because 0 cannot be configured | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| virtualIntfStatsEgrCellCount | 1.3.6.1.4.1.1751.2.18.11.11.1.3 | ||
| Egress Cell Count on VI | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| virtualIntfStatsTimer | 1.3.6.1.4.1.1751.2.18.11.11.1.4 | ||
| Time, in seconds, since last reset. | |||
| OBJECT-TYPE | |||
| Integer32 | 1..899 | ||
| virtualIntfStatsReset | 1.3.6.1.4.1.1751.2.18.11.11.1.5 | ||
| stats reset field. | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| vuniIlmiStatsTable | 1.3.6.1.4.1.1751.2.18.11.12 | ||
| Table of statistics for an ILMI enabled interface. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| VuniIlmiStatsEntry | |||
| vuniIlmiStatsEntry | 1.3.6.1.4.1.1751.2.18.11.12.1 | ||
| Row definition for the ILMI statistics table. | |||
| OBJECT-TYPE | |||
| VuniIlmiStatsEntry | |||
| vuniIlmiStatsId | 1.3.6.1.4.1.1751.2.18.11.12.1.1 | ||
| Interface index (SSPPCCC) for the ILMI interface. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| vuniIlmiVUNIId | 1.3.6.1.4.1.1751.2.18.11.12.1.2 | ||
| Virtual UNI number, second index to access the ILMI on virtual UNI interface. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| vuniIlmiStatsTimer | 1.3.6.1.4.1.1751.2.18.11.12.1.3 | ||
| Time, in seconds, since last statistics reset. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vuniIlmiStatsLinkResets | 1.3.6.1.4.1.1751.2.18.11.12.1.4 | ||
| Times connectivity has toggled between down and up. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vuniIlmiStatsAttachPtChanged | 1.3.6.1.4.1.1751.2.18.11.12.1.5 | ||
| Times Attachment Point change was detected. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vuniIlmiStatsAttachPtVerified | 1.3.6.1.4.1.1751.2.18.11.12.1.6 | ||
| Times Attachment Point was verified successfully. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vuniIlmiStatsSecureLnkProcInit | 1.3.6.1.4.1.1751.2.18.11.12.1.7 | ||
| Times Secure Link Procedure was initiated. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vuniIlmiStatsColdStartRx | 1.3.6.1.4.1.1751.2.18.11.12.1.8 | ||
| Times Cold Start trap was received. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vuniIlmiStatsColdStartTx | 1.3.6.1.4.1.1751.2.18.11.12.1.9 | ||
| Times Cold Start trap was transmitted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vuniIlmiStatsPduRx | 1.3.6.1.4.1.1751.2.18.11.12.1.10 | ||
| vuniIlmi pdu received | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vuniIlmiStatsPduTx | 1.3.6.1.4.1.1751.2.18.11.12.1.11 | ||
| vuniIlmi pdu transmitted | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vuniIlmiStatsReqTimeouts | 1.3.6.1.4.1.1751.2.18.11.12.1.12 | ||
| Times getRequest of any type timed out. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vuniIlmiStatsPacketDisc | 1.3.6.1.4.1.1751.2.18.11.12.1.13 | ||
| Times a received packet was discarded. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vuniResetIlmiStatistics | 1.3.6.1.4.1.1751.2.18.11.12.1.14 | ||
| Reset the ATM ILMI statistics counters for the given channel Id (SSPPCCC) and vuni Id | |||
| OBJECT-TYPE | |||
| INTEGER | noAction(1), reset(2) | ||
| connectionStatistics | 1.3.6.1.4.1.1751.2.18.12 | ||
| OBJECT IDENTIFIER | |||
| atmPvcVccStatsTable | 1.3.6.1.4.1.1751.2.18.12.1 | ||
| Table of statistics for a channel connection | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmPvcVccStatsEntry | |||
| atmPvcVccStatsEntry | 1.3.6.1.4.1.1751.2.18.12.1.1 | ||
| Row definition for the connection statistics table | |||
| OBJECT-TYPE | |||
| AtmPvcVccStatsEntry | |||
| atmPvcVccStatsIfA | 1.3.6.1.4.1.1751.2.18.12.1.1.1 | ||
| Interface index (SSPPCCC) on side A | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmPvcVccStatsVpiA | 1.3.6.1.4.1.1751.2.18.12.1.1.2 | ||
| VPI on side A | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmPvcVccStatsVciA | 1.3.6.1.4.1.1751.2.18.12.1.1.3 | ||
| VCI on side A | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmPvcVccStatsIfB | 1.3.6.1.4.1.1751.2.18.12.1.1.4 | ||
| Interface index (SSPPCCC) on side B | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmPvcVccStatsVpiB | 1.3.6.1.4.1.1751.2.18.12.1.1.5 | ||
| VPI on side B | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmPvcVccStatsVciB | 1.3.6.1.4.1.1751.2.18.12.1.1.6 | ||
| VCI on side B | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmPvcVccStatsInCellCountHiA | 1.3.6.1.4.1.1751.2.18.12.1.1.7 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsInCellCountLoA | 1.3.6.1.4.1.1751.2.18.12.1.1.8 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsOutCellCountHiA | 1.3.6.1.4.1.1751.2.18.12.1.1.9 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsOutCellCountLoA | 1.3.6.1.4.1.1751.2.18.12.1.1.10 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsInCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.1.1.11 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsInCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.1.1.12 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsOutCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.1.1.13 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsOutCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.1.1.14 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsTimer | 1.3.6.1.4.1.1751.2.18.12.1.1.15 | ||
| Number of seconds stats have been collecting | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsFrwdErrCrrctnRateA2B | 1.3.6.1.4.1.1751.2.18.12.1.1.16 | ||
| Displays the Forward error correction rate being used by the FEC module in the A2B direction. This field is dynamic when Auto rates are selected. In other cases, it will display the rate set by the user. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), eighthRate(2), quarterRate(3), halfRate(4) | ||
| atmPvcVccStatsFrwdErrCrrctnRateB2A | 1.3.6.1.4.1.1751.2.18.12.1.1.17 | ||
| Displays the Forward error correction rate being used by the FEC module in the B2A direction. This field is dynamic when Auto rates are selected. In other cases, it will display the rate set by the user. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), eighthRate(2), quarterRate(3), halfRate(4) | ||
| atmPvcVccStatsInOdometerCellCountHiA | 1.3.6.1.4.1.1751.2.18.12.1.1.18 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsInOdometerCellCountLoA | 1.3.6.1.4.1.1751.2.18.12.1.1.19 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsOutOdometerCellCountHiA | 1.3.6.1.4.1.1751.2.18.12.1.1.20 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsOutOdometerCellCountLoA | 1.3.6.1.4.1.1751.2.18.12.1.1.21 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsInOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.1.1.22 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsInOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.1.1.23 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsOutOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.1.1.24 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsOutOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.1.1.25 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsOdometerTimer | 1.3.6.1.4.1.1751.2.18.12.1.1.26 | ||
| Number of seconds since odometer was reset. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsOdometerReset | 1.3.6.1.4.1.1751.2.18.12.1.1.27 | ||
| Odometer reset button. | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| atmPvcVccStatsOamAisTxA | 1.3.6.1.4.1.1751.2.18.12.1.1.28 | ||
| Number of AIS cells transmitted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsOamAisRxA | 1.3.6.1.4.1.1751.2.18.12.1.1.29 | ||
| Number of AIS cells received. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsOamRdiTxA | 1.3.6.1.4.1.1751.2.18.12.1.1.30 | ||
| Number of RDI cells transmitted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsOamRdiRxA | 1.3.6.1.4.1.1751.2.18.12.1.1.31 | ||
| Number of RDI cells received. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsOamAisTxB | 1.3.6.1.4.1.1751.2.18.12.1.1.32 | ||
| Number of AIS cells transmitted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsOamAisRxB | 1.3.6.1.4.1.1751.2.18.12.1.1.33 | ||
| Number of AIS cells received. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsOamRdiTxB | 1.3.6.1.4.1.1751.2.18.12.1.1.34 | ||
| Number of RDI cells transmitted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsOamRdiRxB | 1.3.6.1.4.1.1751.2.18.12.1.1.35 | ||
| Number of RDI cells received. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsCellsDroppedA | 1.3.6.1.4.1.1751.2.18.12.1.1.36 | ||
| Cells Dropped on the Incoming side of A | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsCellsTaggedA | 1.3.6.1.4.1.1751.2.18.12.1.1.37 | ||
| Cells Tagged on the Incoming side of A | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsCellsDroppedB | 1.3.6.1.4.1.1751.2.18.12.1.1.38 | ||
| Cells Dropped on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVccStatsCellsTaggedB | 1.3.6.1.4.1.1751.2.18.12.1.1.39 | ||
| Cells Tagged on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsTable | 1.3.6.1.4.1.1751.2.18.12.2 | ||
| Table of statistics for a channel connection | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmPvcVpcStatsEntry | |||
| atmPvcVpcStatsEntry | 1.3.6.1.4.1.1751.2.18.12.2.1 | ||
| Row definition for the connection statistics table | |||
| OBJECT-TYPE | |||
| AtmPvcVpcStatsEntry | |||
| atmPvcVpcStatsIfA | 1.3.6.1.4.1.1751.2.18.12.2.1.1 | ||
| Interface index (SSPPCCC) on side A | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmPvcVpcStatsVpiA | 1.3.6.1.4.1.1751.2.18.12.2.1.2 | ||
| VPI on side A | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmPvcVpcStatsIfB | 1.3.6.1.4.1.1751.2.18.12.2.1.3 | ||
| Interface index (SSPPCCC) on side A | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmPvcVpcStatsVpiB | 1.3.6.1.4.1.1751.2.18.12.2.1.4 | ||
| VPI on side B | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmPvcVpcStatsInCellCountHiA | 1.3.6.1.4.1.1751.2.18.12.2.1.5 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsInCellCountLoA | 1.3.6.1.4.1.1751.2.18.12.2.1.6 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsOutCellCountHiA | 1.3.6.1.4.1.1751.2.18.12.2.1.7 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsOutCellCountLoA | 1.3.6.1.4.1.1751.2.18.12.2.1.8 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsInCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.2.1.9 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsInCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.2.1.10 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsOutCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.2.1.11 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsOutCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.2.1.12 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsTimer | 1.3.6.1.4.1.1751.2.18.12.2.1.13 | ||
| Number of seconds stats have been collecting | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsInOdometerCellCountHiA | 1.3.6.1.4.1.1751.2.18.12.2.1.14 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsInOdometerCellCountLoA | 1.3.6.1.4.1.1751.2.18.12.2.1.15 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsOutOdometerCellCountHiA | 1.3.6.1.4.1.1751.2.18.12.2.1.16 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsOutOdometerCellCountLoA | 1.3.6.1.4.1.1751.2.18.12.2.1.17 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsInOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.2.1.18 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsInOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.2.1.19 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsOutOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.2.1.20 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsOutOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.2.1.21 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsOdometerTimer | 1.3.6.1.4.1.1751.2.18.12.2.1.22 | ||
| Number of seconds since odometer was reset. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsOdometerReset | 1.3.6.1.4.1.1751.2.18.12.2.1.23 | ||
| Odometer reset button. | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| atmPvcVpcStatsOamAisTxA | 1.3.6.1.4.1.1751.2.18.12.2.1.24 | ||
| Number of AIS cells transmitted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsOamAisRxA | 1.3.6.1.4.1.1751.2.18.12.2.1.25 | ||
| Number of AIS cells received. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsOamRdiTxA | 1.3.6.1.4.1.1751.2.18.12.2.1.26 | ||
| Number of RDI cells transmitted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsOamRdiRxA | 1.3.6.1.4.1.1751.2.18.12.2.1.27 | ||
| Number of RDI cells received. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsOamAisTxB | 1.3.6.1.4.1.1751.2.18.12.2.1.28 | ||
| Number of AIS cells transmitted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsOamAisRxB | 1.3.6.1.4.1.1751.2.18.12.2.1.29 | ||
| Number of AIS cells received. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsOamRdiTxB | 1.3.6.1.4.1.1751.2.18.12.2.1.30 | ||
| Number of RDI cells transmitted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsOamRdiRxB | 1.3.6.1.4.1.1751.2.18.12.2.1.31 | ||
| Number of RDI cells received. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsCellsDroppedA | 1.3.6.1.4.1.1751.2.18.12.2.1.32 | ||
| Cells Dropped on the Incoming side of A | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsCellsTaggedA | 1.3.6.1.4.1.1751.2.18.12.2.1.33 | ||
| Cells Tagged on the Incoming side of A | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsCellsDroppedB | 1.3.6.1.4.1.1751.2.18.12.2.1.34 | ||
| Cells Dropped on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmPvcVpcStatsCellsTaggedB | 1.3.6.1.4.1.1751.2.18.12.2.1.35 | ||
| Cells Tagged on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccStatsTable | 1.3.6.1.4.1.1751.2.18.12.3 | ||
| Table of statistics for a channel connection | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmSvcVccStatsEntry | |||
| atmSvcVccStatsEntry | 1.3.6.1.4.1.1751.2.18.12.3.1 | ||
| Row definition for the connection statistics table | |||
| OBJECT-TYPE | |||
| AtmSvcVccStatsEntry | |||
| atmSvcVccStatsIfA | 1.3.6.1.4.1.1751.2.18.12.3.1.1 | ||
| Interface index (SSPPCCC) on side A | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmSvcVccStatsVpiA | 1.3.6.1.4.1.1751.2.18.12.3.1.2 | ||
| VPI on side A | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmSvcVccStatsVciA | 1.3.6.1.4.1.1751.2.18.12.3.1.3 | ||
| VCI on side A | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmSvcVccStatsIfB | 1.3.6.1.4.1.1751.2.18.12.3.1.4 | ||
| Interface index (SSPPCCC) on side A | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmSvcVccStatsVpiB | 1.3.6.1.4.1.1751.2.18.12.3.1.5 | ||
| VPI on side B | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmSvcVccStatsVciB | 1.3.6.1.4.1.1751.2.18.12.3.1.6 | ||
| VCI on side B | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmSvcVccStatsInCellCountHiA | 1.3.6.1.4.1.1751.2.18.12.3.1.7 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccStatsInCellCountLoA | 1.3.6.1.4.1.1751.2.18.12.3.1.8 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccStatsOutCellCountHiA | 1.3.6.1.4.1.1751.2.18.12.3.1.9 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccStatsOutCellCountLoA | 1.3.6.1.4.1.1751.2.18.12.3.1.10 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccStatsInCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.3.1.11 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccStatsInCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.3.1.12 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccStatsOutCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.3.1.13 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccStatsOutCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.3.1.14 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccStatsTimer | 1.3.6.1.4.1.1751.2.18.12.3.1.15 | ||
| Number of seconds stats have been collecting | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccStatsInOdometerCellCountHiA | 1.3.6.1.4.1.1751.2.18.12.3.1.16 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccStatsInOdometerCellCountLoA | 1.3.6.1.4.1.1751.2.18.12.3.1.17 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccStatsOutOdometerCellCountHiA | 1.3.6.1.4.1.1751.2.18.12.3.1.18 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccStatsOutOdometerCellCountLoA | 1.3.6.1.4.1.1751.2.18.12.3.1.19 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccStatsInOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.3.1.20 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccStatsInOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.3.1.21 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccStatsOutOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.3.1.22 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccStatsOutOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.3.1.23 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccStatsOdometerTimer | 1.3.6.1.4.1.1751.2.18.12.3.1.24 | ||
| Number of seconds since odometer was reset. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccStatsOdometerReset | 1.3.6.1.4.1.1751.2.18.12.3.1.25 | ||
| Odometer reset button. | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| atmSvcVccStatsCellsDroppedA | 1.3.6.1.4.1.1751.2.18.12.3.1.26 | ||
| Cells Dropped on the Incoming side of A | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccStatsCellsTaggedA | 1.3.6.1.4.1.1751.2.18.12.3.1.27 | ||
| Cells Tagged on the Incoming side of A | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccStatsCellsDroppedB | 1.3.6.1.4.1.1751.2.18.12.3.1.28 | ||
| Cells Dropped on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSvcVccStatsCellsTaggedB | 1.3.6.1.4.1.1751.2.18.12.3.1.29 | ||
| Cells Tagged on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccStatsTable | 1.3.6.1.4.1.1751.2.18.12.4 | ||
| Table of Statistics entries | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| IpAtmAppPvcVccStatsEntry | |||
| ipAtmAppPvcVccStatsEntry | 1.3.6.1.4.1.1751.2.18.12.4.1 | ||
| Row definition for statistics attribution. | |||
| OBJECT-TYPE | |||
| IpAtmAppPvcVccStatsEntry | |||
| ipAtmAppPvcVccStatsDestAddrA | 1.3.6.1.4.1.1751.2.18.12.4.1.1 | ||
| Statistics destination IP address | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| ipAtmAppPvcVccStatsSubnetMaskA | 1.3.6.1.4.1.1751.2.18.12.4.1.2 | ||
| The subnet mask of the destination IP address. Value is an IP address. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| ipAtmAppPvcVccStatsIfB | 1.3.6.1.4.1.1751.2.18.12.4.1.3 | ||
| Interface index (SSPPCCC) on side B | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| ipAtmAppPvcVccStatsVpiB | 1.3.6.1.4.1.1751.2.18.12.4.1.4 | ||
| VPI on side B | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| ipAtmAppPvcVccStatsVciB | 1.3.6.1.4.1.1751.2.18.12.4.1.5 | ||
| VCI on side B | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| ipAtmAppPvcVccStatsInCellCountHiA | 1.3.6.1.4.1.1751.2.18.12.4.1.6 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccStatsInCellCountLoA | 1.3.6.1.4.1.1751.2.18.12.4.1.7 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccStatsOutCellCountHiA | 1.3.6.1.4.1.1751.2.18.12.4.1.8 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccStatsOutCellCountLoA | 1.3.6.1.4.1.1751.2.18.12.4.1.9 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccStatsFramesInB | 1.3.6.1.4.1.1751.2.18.12.4.1.10 | ||
| number of frames received on side B. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccStatsFramesOutB | 1.3.6.1.4.1.1751.2.18.12.4.1.11 | ||
| number of frames sent from side B. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccStatsInCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.4.1.12 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccStatsInCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.4.1.13 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccStatsOutCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.4.1.14 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccStatsOutCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.4.1.15 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccStatsTimer | 1.3.6.1.4.1.1751.2.18.12.4.1.16 | ||
| Number of seconds stats have been collecting | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccStatsInOdometerCellCountHiA | 1.3.6.1.4.1.1751.2.18.12.4.1.17 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccStatsInOdometerCellCountLoA | 1.3.6.1.4.1.1751.2.18.12.4.1.18 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccStatsOutOdometerCellCountHiA | 1.3.6.1.4.1.1751.2.18.12.4.1.19 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccStatsOutOdometerCellCountLoA | 1.3.6.1.4.1.1751.2.18.12.4.1.20 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccStatsOdometerFramesInB | 1.3.6.1.4.1.1751.2.18.12.4.1.21 | ||
| Valid frames received at side B. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccStatsOdometerFramesOutB | 1.3.6.1.4.1.1751.2.18.12.4.1.22 | ||
| Valid frames transmitted from side B. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccStatsInOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.4.1.23 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccStatsInOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.4.1.24 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccStatsOutOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.4.1.25 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccStatsOutOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.4.1.26 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccStatsOdometerTimer | 1.3.6.1.4.1.1751.2.18.12.4.1.27 | ||
| Number of seconds since odometer was reset. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccStatsOdometerReset | 1.3.6.1.4.1.1751.2.18.12.4.1.28 | ||
| Odometer reset button. | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| ipAtmAppPvcVccStatsCellsDroppedB | 1.3.6.1.4.1.1751.2.18.12.4.1.29 | ||
| Cells Dropped on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppPvcVccStatsCellsTaggedB | 1.3.6.1.4.1.1751.2.18.12.4.1.30 | ||
| Cells Tagged on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppSvcVccStatsTable | 1.3.6.1.4.1.1751.2.18.12.5 | ||
| Table of statistics entries | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| IpAtmAppSvcVccStatsEntry | |||
| ipAtmAppSvcVccStatsEntry | 1.3.6.1.4.1.1751.2.18.12.5.1 | ||
| Row definition of statistics attributes. | |||
| OBJECT-TYPE | |||
| IpAtmAppSvcVccStatsEntry | |||
| ipAtmAppSvcVccStatsDestAddrA | 1.3.6.1.4.1.1751.2.18.12.5.1.1 | ||
| Statistics destination IP address | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| ipAtmAppSvcVccStatsSubnetMaskA | 1.3.6.1.4.1.1751.2.18.12.5.1.2 | ||
| The subnet mask of the destination IP address. Value is an IP address. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| ipAtmAppSvcVccStatsIfB | 1.3.6.1.4.1.1751.2.18.12.5.1.3 | ||
| Interface index (SSPPCCC) on side B | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| ipAtmAppSvcVccStatsVpiB | 1.3.6.1.4.1.1751.2.18.12.5.1.4 | ||
| VPI on side B | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| ipAtmAppSvcVccStatsVciB | 1.3.6.1.4.1.1751.2.18.12.5.1.5 | ||
| VCI on side B | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| ipAtmAppSvcVccStatsInCellCountHiA | 1.3.6.1.4.1.1751.2.18.12.5.1.6 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppSvcVccStatsInCellCountLoA | 1.3.6.1.4.1.1751.2.18.12.5.1.7 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppSvcVccStatsOutCellCountHiA | 1.3.6.1.4.1.1751.2.18.12.5.1.8 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppSvcVccStatsOutCellCountLoA | 1.3.6.1.4.1.1751.2.18.12.5.1.9 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppSvcVccStatsFramesInB | 1.3.6.1.4.1.1751.2.18.12.5.1.10 | ||
| Frames received at side B. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppSvcVccStatsFramesOutB | 1.3.6.1.4.1.1751.2.18.12.5.1.11 | ||
| Frames transmitted from side B. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppSvcVccStatsInCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.5.1.12 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppSvcVccStatsInCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.5.1.13 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppSvcVccStatsOutCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.5.1.14 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppSvcVccStatsOutCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.5.1.15 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppSvcVccStatsTimer | 1.3.6.1.4.1.1751.2.18.12.5.1.16 | ||
| Number of seconds stats have been collecting | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppSvcVccStatsCellsDroppedB | 1.3.6.1.4.1.1751.2.18.12.5.1.17 | ||
| Cells Dropped on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmAppSvcVccStatsCellsTaggedB | 1.3.6.1.4.1.1751.2.18.12.5.1.18 | ||
| Cells Tagged on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmPvcVccStatsTable | 1.3.6.1.4.1.1751.2.18.12.6 | ||
| Table of statistics for a channel connection | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| CirEmAtmPvcVccStatsEntry | |||
| cirEmAtmPvcVccStatsEntry | 1.3.6.1.4.1.1751.2.18.12.6.1 | ||
| Row definition for the connection statistics table | |||
| OBJECT-TYPE | |||
| CirEmAtmPvcVccStatsEntry | |||
| cirEmAtmPvcVccStatsIfA | 1.3.6.1.4.1.1751.2.18.12.6.1.1 | ||
| Interface index (SSPPCCC) on side A | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| cirEmAtmPvcVccStatsIfB | 1.3.6.1.4.1.1751.2.18.12.6.1.2 | ||
| Interface index (SSPPCCC) on side A | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| cirEmAtmPvcVccStatsVpiB | 1.3.6.1.4.1.1751.2.18.12.6.1.3 | ||
| VPI on side B | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| cirEmAtmPvcVccStatsVciB | 1.3.6.1.4.1.1751.2.18.12.6.1.4 | ||
| VCI on side B | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| cirEmAtmPvcVccStatsCellsEncodedHiA | 1.3.6.1.4.1.1751.2.18.12.6.1.5 | ||
| Cells encoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmPvcVccStatsCellsEncodedLoA | 1.3.6.1.4.1.1751.2.18.12.6.1.6 | ||
| Cells encoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmPvcVccStatsCellsDecodedHiA | 1.3.6.1.4.1.1751.2.18.12.6.1.7 | ||
| Cells decoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmPvcVccStatsCellsDecodedLoA | 1.3.6.1.4.1.1751.2.18.12.6.1.8 | ||
| Cells decoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmPvcVccStatsInCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.6.1.9 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmPvcVccStatsInCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.6.1.10 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmPvcVccStatsOutCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.6.1.11 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmPvcVccStatsOutCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.6.1.12 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmPvcVccStatsTimer | 1.3.6.1.4.1.1751.2.18.12.6.1.13 | ||
| Number of seconds stats have been collecting | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmPvcVccStatsOdometerCellsEncodedHiA | 1.3.6.1.4.1.1751.2.18.12.6.1.14 | ||
| Cells encoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmPvcVccStatsOdometerCellsEncodedLoA | 1.3.6.1.4.1.1751.2.18.12.6.1.15 | ||
| Cells encoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmPvcVccStatsOdometerCellsDecodedHiA | 1.3.6.1.4.1.1751.2.18.12.6.1.16 | ||
| Cells decoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmPvcVccStatsOdometerCellsDecodedLoA | 1.3.6.1.4.1.1751.2.18.12.6.1.17 | ||
| Cells decoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmPvcVccStatsInOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.6.1.18 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmPvcVccStatsInOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.6.1.19 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmPvcVccStatsOutOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.6.1.20 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmPvcVccStatsOutOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.6.1.21 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmPvcVccStatsOdometerTimer | 1.3.6.1.4.1.1751.2.18.12.6.1.22 | ||
| Number of seconds since odometer was reset. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmPvcVccStatsOdometerReset | 1.3.6.1.4.1.1751.2.18.12.6.1.23 | ||
| Odometer reset button. | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| cirEmAtmPvcVccStatsOamAisTx | 1.3.6.1.4.1.1751.2.18.12.6.1.24 | ||
| Number of AIS cells transmitted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmPvcVccStatsOamAisRx | 1.3.6.1.4.1.1751.2.18.12.6.1.25 | ||
| Number of AIS cells received. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmPvcVccStatsOamRdiTx | 1.3.6.1.4.1.1751.2.18.12.6.1.26 | ||
| Number of RDI cells transmitted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmPvcVccStatsOamRdiRx | 1.3.6.1.4.1.1751.2.18.12.6.1.27 | ||
| Number of RDI cells received. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmPvcVccStatsCellsDroppedB | 1.3.6.1.4.1.1751.2.18.12.6.1.28 | ||
| Cells Dropped on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmPvcVccStatsCellsTaggedB | 1.3.6.1.4.1.1751.2.18.12.6.1.29 | ||
| Cells Tagged on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsTable | 1.3.6.1.4.1.1751.2.18.12.7 | ||
| Table of statistics for a channel connection | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| FrAtmPvcVccStatsEntry | |||
| frAtmPvcVccStatsEntry | 1.3.6.1.4.1.1751.2.18.12.7.1 | ||
| Row definition for the connection statistics table | |||
| OBJECT-TYPE | |||
| FrAtmPvcVccStatsEntry | |||
| frAtmPvcVccStatsIfA | 1.3.6.1.4.1.1751.2.18.12.7.1.1 | ||
| Interface index (SSPPCCC) on side A | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| frAtmPvcVccStatsDlciA | 1.3.6.1.4.1.1751.2.18.12.7.1.2 | ||
| dlci - side A | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1023 | ||
| frAtmPvcVccStatsIfB | 1.3.6.1.4.1.1751.2.18.12.7.1.3 | ||
| Interface index (SSPPCCC) on side B | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| frAtmPvcVccStatsVpiB | 1.3.6.1.4.1.1751.2.18.12.7.1.4 | ||
| VPI on side B | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| frAtmPvcVccStatsVciB | 1.3.6.1.4.1.1751.2.18.12.7.1.5 | ||
| VCI on side B | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| frAtmPvcVccStatsCellsEncodedHiA | 1.3.6.1.4.1.1751.2.18.12.7.1.6 | ||
| Cells encoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsCellsEncodedLoA | 1.3.6.1.4.1.1751.2.18.12.7.1.7 | ||
| Cells encoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsCellsDecodedHiA | 1.3.6.1.4.1.1751.2.18.12.7.1.8 | ||
| Cells decoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsCellsDecodedLoA | 1.3.6.1.4.1.1751.2.18.12.7.1.9 | ||
| Cells decoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsInCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.7.1.10 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsInCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.7.1.11 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsOutCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.7.1.12 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsOutCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.7.1.13 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsTimer | 1.3.6.1.4.1.1751.2.18.12.7.1.14 | ||
| Number of seconds stats have been collecting | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsFramesDroppedA | 1.3.6.1.4.1.1751.2.18.12.7.1.15 | ||
| Number of frames dropped for a given DLCI for A2B direction, only applicable to the input side. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsOdometerCellsEncodedHiA | 1.3.6.1.4.1.1751.2.18.12.7.1.16 | ||
| Cells encoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsOdometerCellsEncodedLoA | 1.3.6.1.4.1.1751.2.18.12.7.1.17 | ||
| Cells encoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsOdometerCellsDecodedHiA | 1.3.6.1.4.1.1751.2.18.12.7.1.18 | ||
| Cells decoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsOdometerCellsDecodedLoA | 1.3.6.1.4.1.1751.2.18.12.7.1.19 | ||
| Cells decoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsInOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.7.1.20 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsInOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.7.1.21 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsOutOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.7.1.22 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsOutOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.7.1.23 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsOdometerTimer | 1.3.6.1.4.1.1751.2.18.12.7.1.24 | ||
| Number of seconds since odometer was reset. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsOdometerFramesDroppedA | 1.3.6.1.4.1.1751.2.18.12.7.1.25 | ||
| Number of frames dropped for a given DLCI for A2B direction, only applicable to the input side. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsOdometerReset | 1.3.6.1.4.1.1751.2.18.12.7.1.26 | ||
| Odometer reset button. | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| frAtmPvcVccStatsOamAisTx | 1.3.6.1.4.1.1751.2.18.12.7.1.27 | ||
| Number of AIS cells transmitted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsOamAisRx | 1.3.6.1.4.1.1751.2.18.12.7.1.28 | ||
| Number of AIS cells received. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsOamRdiTx | 1.3.6.1.4.1.1751.2.18.12.7.1.29 | ||
| Number of RDI cells transmitted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsOamRdiRx | 1.3.6.1.4.1.1751.2.18.12.7.1.30 | ||
| Number of RDI cells received. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsAal5ErrFramesA | 1.3.6.1.4.1.1751.2.18.12.7.1.31 | ||
| Number of Aal5 Errored Frames, which are not dropped due to UPC in A2B dir, only applicable to Input Side | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsFramesTaggedA | 1.3.6.1.4.1.1751.2.18.12.7.1.32 | ||
| Number of Frames tagged due to UPC in A2B dir, only applicable to Input Side | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsCellsDroppedB | 1.3.6.1.4.1.1751.2.18.12.7.1.33 | ||
| Cells Dropped on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frAtmPvcVccStatsCellsTaggedB | 1.3.6.1.4.1.1751.2.18.12.7.1.34 | ||
| Cells Tagged on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcStatsTable | 1.3.6.1.4.1.1751.2.18.12.8 | ||
| Table of statistics for a channel connection | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| FrFrPvcStatsEntry | |||
| frFrPvcStatsEntry | 1.3.6.1.4.1.1751.2.18.12.8.1 | ||
| Row definition for the connection statistics table | |||
| OBJECT-TYPE | |||
| FrFrPvcStatsEntry | |||
| frFrPvcStatsIfA | 1.3.6.1.4.1.1751.2.18.12.8.1.1 | ||
| Interface index (SSPPCCC) on side A | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| frFrPvcStatsDlciA | 1.3.6.1.4.1.1751.2.18.12.8.1.2 | ||
| dlci - side A | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1023 | ||
| frFrPvcStatsIfB | 1.3.6.1.4.1.1751.2.18.12.8.1.3 | ||
| Interface index (SSPPCCC) on side B | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| frFrPvcStatsDlciB | 1.3.6.1.4.1.1751.2.18.12.8.1.4 | ||
| dlci - side B | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1023 | ||
| frFrPvcStatsCellsEncodedHiA | 1.3.6.1.4.1.1751.2.18.12.8.1.5 | ||
| Cells encoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcStatsCellsEncodedLoA | 1.3.6.1.4.1.1751.2.18.12.8.1.6 | ||
| Cells encoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcStatsCellsDecodedHiA | 1.3.6.1.4.1.1751.2.18.12.8.1.7 | ||
| Cells decoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcStatsCellsDecodedLoA | 1.3.6.1.4.1.1751.2.18.12.8.1.8 | ||
| Cells decoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcStatsCellsEncodedHiB | 1.3.6.1.4.1.1751.2.18.12.8.1.9 | ||
| Cells encoded on side B- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcStatsCellsEncodedLoB | 1.3.6.1.4.1.1751.2.18.12.8.1.10 | ||
| Cells encoded on side B- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcStatsCellsDecodedHiB | 1.3.6.1.4.1.1751.2.18.12.8.1.11 | ||
| Cells decoded on side B- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcStatsCellsDecodedLoB | 1.3.6.1.4.1.1751.2.18.12.8.1.12 | ||
| Cells decoded on side B- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcStatsTimer | 1.3.6.1.4.1.1751.2.18.12.8.1.13 | ||
| Number of seconds stats have been collecting | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcStatsFramesDroppedA | 1.3.6.1.4.1.1751.2.18.12.8.1.14 | ||
| Number of frames dropped for a given DLCI for A2B direction, only applicable to the input side. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcStatsFramesDroppedB | 1.3.6.1.4.1.1751.2.18.12.8.1.15 | ||
| Number of frames dropped for a given DLCI for B2A direction, only applicable to the input side. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcStatsOdometerCellsEncodedHiA | 1.3.6.1.4.1.1751.2.18.12.8.1.16 | ||
| Cells encoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcStatsOdometerCellsEncodedLoA | 1.3.6.1.4.1.1751.2.18.12.8.1.17 | ||
| Cells encoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcStatsOdometerCellsDecodedHiA | 1.3.6.1.4.1.1751.2.18.12.8.1.18 | ||
| Cells decoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcStatsOdometerCellsDecodedLoA | 1.3.6.1.4.1.1751.2.18.12.8.1.19 | ||
| Cells decoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcStatsOdometerCellsEncodedHiB | 1.3.6.1.4.1.1751.2.18.12.8.1.20 | ||
| Cells encoded on side B- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcStatsOdometerCellsEncodedLoB | 1.3.6.1.4.1.1751.2.18.12.8.1.21 | ||
| Cells encoded on side B- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcStatsOdometerCellsDecodedHiB | 1.3.6.1.4.1.1751.2.18.12.8.1.22 | ||
| Cells decoded on side B- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcStatsOdometerCellsDecodedLoB | 1.3.6.1.4.1.1751.2.18.12.8.1.23 | ||
| Cells decoded on side B- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcStatsOdometerTimer | 1.3.6.1.4.1.1751.2.18.12.8.1.24 | ||
| Number of seconds since odometer was reset. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcStatsOdometerFramesDroppedA | 1.3.6.1.4.1.1751.2.18.12.8.1.25 | ||
| Number of frames dropped for a given DLCI for A2B direction, only applicable to the input side. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcStatsOdometerFramesDroppedB | 1.3.6.1.4.1.1751.2.18.12.8.1.26 | ||
| Number of frames dropped for a given DLCI for B2A direction, only applicable to the input side. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcStatsOdometerReset | 1.3.6.1.4.1.1751.2.18.12.8.1.27 | ||
| Odometer reset button. | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| frFrPvcStatsAal5ErrFramesA | 1.3.6.1.4.1.1751.2.18.12.8.1.28 | ||
| Number of Aal5 Errored Frames, which are not dropped due to UPC in A2B dir, only applicable to Input Side | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcStatsAal5ErrFramesB | 1.3.6.1.4.1.1751.2.18.12.8.1.29 | ||
| Number of Aal5 Errored Frames, which are not dropped due to UPC in B2A dir, only applicable to Input Side | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcStatsFramesTaggedA | 1.3.6.1.4.1.1751.2.18.12.8.1.30 | ||
| Number of Frames tagged due to UPC in A2B dir, only applicable to Input Side | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| frFrPvcStatsFramesTaggedB | 1.3.6.1.4.1.1751.2.18.12.8.1.31 | ||
| Number of Frames tagged due to UPC in B2A dir, only applicable to Input Side | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccStatsTable | 1.3.6.1.4.1.1751.2.18.12.9 | ||
| Table of statistics for a channel connection | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| VbrAtmPvcVccStatsEntry | |||
| vbrAtmPvcVccStatsEntry | 1.3.6.1.4.1.1751.2.18.12.9.1 | ||
| Row definition for the connection statistics table | |||
| OBJECT-TYPE | |||
| VbrAtmPvcVccStatsEntry | |||
| vbrAtmPvcVccStatsIfA | 1.3.6.1.4.1.1751.2.18.12.9.1.1 | ||
| Interface index (SSPPCCC) on side A | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| vbrAtmPvcVccStatsIfB | 1.3.6.1.4.1.1751.2.18.12.9.1.2 | ||
| Interface index (SSPPCCC) on side A | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| vbrAtmPvcVccStatsVpiB | 1.3.6.1.4.1.1751.2.18.12.9.1.3 | ||
| vpi - side B | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| vbrAtmPvcVccStatsVciB | 1.3.6.1.4.1.1751.2.18.12.9.1.4 | ||
| vci - side B | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| vbrAtmPvcVccStatsCellsEncodedHiA | 1.3.6.1.4.1.1751.2.18.12.9.1.5 | ||
| Cells encoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccStatsCellsEncodedLoA | 1.3.6.1.4.1.1751.2.18.12.9.1.6 | ||
| Cells encoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccStatsCellsDecodedHiA | 1.3.6.1.4.1.1751.2.18.12.9.1.7 | ||
| Cells decoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccStatsCellsDecodedLoA | 1.3.6.1.4.1.1751.2.18.12.9.1.8 | ||
| Cells decoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccStatsInCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.9.1.10 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccStatsInCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.9.1.11 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccStatsOutCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.9.1.12 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccStatsOutCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.9.1.13 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccStatsTimer | 1.3.6.1.4.1.1751.2.18.12.9.1.14 | ||
| Number of seconds stats have been collecting | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccStatsOdometerCellsEncodedHiA | 1.3.6.1.4.1.1751.2.18.12.9.1.15 | ||
| Cells encoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccStatsOdometerCellsEncodedLoA | 1.3.6.1.4.1.1751.2.18.12.9.1.16 | ||
| Cells encoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccStatsOdometerCellsDecodedHiA | 1.3.6.1.4.1.1751.2.18.12.9.1.17 | ||
| Cells decoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccStatsOdometerCellsDecodedLoA | 1.3.6.1.4.1.1751.2.18.12.9.1.18 | ||
| Cells decoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccStatsInOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.9.1.19 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccStatsInOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.9.1.20 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccStatsOutOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.9.1.21 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccStatsOutOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.9.1.22 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccStatsOdometerTimer | 1.3.6.1.4.1.1751.2.18.12.9.1.23 | ||
| Number of seconds since odometer was reset. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccStatsOdometerReset | 1.3.6.1.4.1.1751.2.18.12.9.1.24 | ||
| Odometer reset button. | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| vbrAtmPvcVccStatsOamAisTx | 1.3.6.1.4.1.1751.2.18.12.9.1.25 | ||
| Number of AIS cells transmitted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccStatsOamAisRx | 1.3.6.1.4.1.1751.2.18.12.9.1.26 | ||
| Number of AIS cells received. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccStatsOamRdiTx | 1.3.6.1.4.1.1751.2.18.12.9.1.27 | ||
| Number of RDI cells transmitted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccStatsOamRdiRx | 1.3.6.1.4.1.1751.2.18.12.9.1.28 | ||
| Number of RDI cells received. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccStatsCellsDroppedB | 1.3.6.1.4.1.1751.2.18.12.9.1.29 | ||
| Cells Dropped on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmPvcVccStatsCellsTaggedB | 1.3.6.1.4.1.1751.2.18.12.9.1.30 | ||
| Cells Tagged on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmCirEmPvcStatsTable | 1.3.6.1.4.1.1751.2.18.12.10 | ||
| Table of statistics for a channel connection | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| CirEmCirEmPvcStatsEntry | |||
| cirEmCirEmPvcStatsEntry | 1.3.6.1.4.1.1751.2.18.12.10.1 | ||
| Row definition for the connection statistics table | |||
| OBJECT-TYPE | |||
| CirEmCirEmPvcStatsEntry | |||
| cirEmCirEmPvcStatsIfA | 1.3.6.1.4.1.1751.2.18.12.10.1.1 | ||
| Interface index (SSPPCCC) on side A | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| cirEmCirEmPvcStatsIfB | 1.3.6.1.4.1.1751.2.18.12.10.1.2 | ||
| Interface index (SSPPCCC) on side A | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| cirEmCirEmPvcStatsCellsEncodedHiA | 1.3.6.1.4.1.1751.2.18.12.10.1.3 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmCirEmPvcStatsCellsEncodedLoA | 1.3.6.1.4.1.1751.2.18.12.10.1.4 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmCirEmPvcStatsCellsDecodedHiA | 1.3.6.1.4.1.1751.2.18.12.10.1.5 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmCirEmPvcStatsCellsDecodedLoA | 1.3.6.1.4.1.1751.2.18.12.10.1.6 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmCirEmPvcStatsCellsEncodedHiB | 1.3.6.1.4.1.1751.2.18.12.10.1.7 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmCirEmPvcStatsCellsEncodedLoB | 1.3.6.1.4.1.1751.2.18.12.10.1.8 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmCirEmPvcStatsCellsDecodedHiB | 1.3.6.1.4.1.1751.2.18.12.10.1.9 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmCirEmPvcStatsCellsDecodedLoB | 1.3.6.1.4.1.1751.2.18.12.10.1.10 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmCirEmPvcStatsTimer | 1.3.6.1.4.1.1751.2.18.12.10.1.11 | ||
| Number of seconds stats have been collecting | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmCirEmPvcStatsOdometerCellsEncodedHiA | 1.3.6.1.4.1.1751.2.18.12.10.1.12 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmCirEmPvcStatsOdometerCellsEncodedLoA | 1.3.6.1.4.1.1751.2.18.12.10.1.13 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmCirEmPvcStatsOdometerCellsDecodedHiA | 1.3.6.1.4.1.1751.2.18.12.10.1.14 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmCirEmPvcStatsOdometerCellsDecodedLoA | 1.3.6.1.4.1.1751.2.18.12.10.1.15 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmCirEmPvcStatsOdometerCellsEncodedHiB | 1.3.6.1.4.1.1751.2.18.12.10.1.16 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmCirEmPvcStatsOdometerCellsEncodedLoB | 1.3.6.1.4.1.1751.2.18.12.10.1.17 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmCirEmPvcStatsOdometerCellsDecodedHiB | 1.3.6.1.4.1.1751.2.18.12.10.1.18 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmCirEmPvcStatsOdometerCellsDecodedLoB | 1.3.6.1.4.1.1751.2.18.12.10.1.19 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmCirEmPvcStatsOdometerTimer | 1.3.6.1.4.1.1751.2.18.12.10.1.20 | ||
| Number of seconds since odometer was reset. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmCirEmPvcStatsOdometerReset | 1.3.6.1.4.1.1751.2.18.12.10.1.21 | ||
| Odometer reset button. | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| vbrVbrPvcStatsTable | 1.3.6.1.4.1.1751.2.18.12.11 | ||
| Table of statistics for a channel connection | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| VbrVbrPvcStatsEntry | |||
| vbrVbrPvcStatsEntry | 1.3.6.1.4.1.1751.2.18.12.11.1 | ||
| Row definition for the connection statistics table | |||
| OBJECT-TYPE | |||
| VbrVbrPvcStatsEntry | |||
| vbrVbrPvcStatsIfA | 1.3.6.1.4.1.1751.2.18.12.11.1.1 | ||
| Interface index (SSPPCCC) on side A | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| vbrVbrPvcStatsIfB | 1.3.6.1.4.1.1751.2.18.12.11.1.2 | ||
| Interface index (SSPPCCC) on side A | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| vbrVbrPvcStatsCellsEncodedHiA | 1.3.6.1.4.1.1751.2.18.12.11.1.4 | ||
| Cells encoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrVbrPvcStatsCellsEncodedLoA | 1.3.6.1.4.1.1751.2.18.12.11.1.5 | ||
| Cells encoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrVbrPvcStatsCellsDecodedHiA | 1.3.6.1.4.1.1751.2.18.12.11.1.6 | ||
| Cells decoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrVbrPvcStatsCellsDecodedLoA | 1.3.6.1.4.1.1751.2.18.12.11.1.7 | ||
| Cells decoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrVbrPvcStatsCellsEncodedHiB | 1.3.6.1.4.1.1751.2.18.12.11.1.9 | ||
| Cells encoded on side B- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrVbrPvcStatsCellsEncodedLoB | 1.3.6.1.4.1.1751.2.18.12.11.1.10 | ||
| Cells encoded on side B- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrVbrPvcStatsCellsDecodedHiB | 1.3.6.1.4.1.1751.2.18.12.11.1.11 | ||
| Cells decoded on side B- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrVbrPvcStatsCellsDecodedLoB | 1.3.6.1.4.1.1751.2.18.12.11.1.12 | ||
| Cells decoded on side B- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrVbrPvcStatsTimer | 1.3.6.1.4.1.1751.2.18.12.11.1.13 | ||
| Number of seconds stats have been collecting | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrVbrPvcStatsOdometerCellsEncodedHiA | 1.3.6.1.4.1.1751.2.18.12.11.1.14 | ||
| Cells encoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrVbrPvcStatsOdometerCellsEncodedLoA | 1.3.6.1.4.1.1751.2.18.12.11.1.15 | ||
| Cells encoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrVbrPvcStatsOdometerCellsDecodedHiA | 1.3.6.1.4.1.1751.2.18.12.11.1.16 | ||
| Cells decoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrVbrPvcStatsOdometerCellsDecodedLoA | 1.3.6.1.4.1.1751.2.18.12.11.1.17 | ||
| Cells decoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrVbrPvcStatsOdometerCellsEncodedHiB | 1.3.6.1.4.1.1751.2.18.12.11.1.18 | ||
| Cells encoded on side B- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrVbrPvcStatsOdometerCellsEncodedLoB | 1.3.6.1.4.1.1751.2.18.12.11.1.19 | ||
| Cells encoded on side B- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrVbrPvcStatsOdometerCellsDecodedHiB | 1.3.6.1.4.1.1751.2.18.12.11.1.20 | ||
| Cells decoded on side B- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrVbrPvcStatsOdometerCellsDecodedLoB | 1.3.6.1.4.1.1751.2.18.12.11.1.21 | ||
| Cells decoded on side B- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrVbrPvcStatsOdometerTimer | 1.3.6.1.4.1.1751.2.18.12.11.1.22 | ||
| Number of seconds since odometer was reset. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrVbrPvcStatsOdometerReset | 1.3.6.1.4.1.1751.2.18.12.11.1.23 | ||
| Odometer reset button. | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| bridgeBridgePvcStatsTable | 1.3.6.1.4.1.1751.2.18.12.12 | ||
| Table of bridge-bridge PVC connection statistics | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| BridgeBridgePvcStatsEntry | |||
| bridgeBridgePvcStatsEntry | 1.3.6.1.4.1.1751.2.18.12.12.1 | ||
| Row definition of statistics attributes | |||
| OBJECT-TYPE | |||
| BridgeBridgePvcStatsEntry | |||
| bridgeBridgePvcStatsIfA | 1.3.6.1.4.1.1751.2.18.12.12.1.1 | ||
| Interface index (SSPPCCC) on side A | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| bridgeBridgePvcStatsIfB | 1.3.6.1.4.1.1751.2.18.12.12.1.2 | ||
| Interface index (SSPPCCC) on side B | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| bridgeBridgePvcStatsCellsEncodedHiA | 1.3.6.1.4.1.1751.2.18.12.12.1.3 | ||
| Cells encoded on side A - (High order portion ) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeBridgePvcStatsCellsEncodedLoA | 1.3.6.1.4.1.1751.2.18.12.12.1.4 | ||
| Cells encoded on side A - ( Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeBridgePvcStatsCellsDecodedHiA | 1.3.6.1.4.1.1751.2.18.12.12.1.5 | ||
| Cells decoded on side A - ( High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeBridgePvcStatsCellsDecodedLoA | 1.3.6.1.4.1.1751.2.18.12.12.1.6 | ||
| Cells decoded on side A - (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeBridgePvcStatsCellsEncodedHiB | 1.3.6.1.4.1.1751.2.18.12.12.1.7 | ||
| Cells encoded on side B - (High order portion ) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeBridgePvcStatsCellsEncodedLoB | 1.3.6.1.4.1.1751.2.18.12.12.1.8 | ||
| Cells encoded on side B - (Low order portion ) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeBridgePvcStatsCellsDecodedHiB | 1.3.6.1.4.1.1751.2.18.12.12.1.9 | ||
| Cells decoded on side B - (High order portion ) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeBridgePvcStatsCellsDecodedLoB | 1.3.6.1.4.1.1751.2.18.12.12.1.10 | ||
| Cells decoded on side B -(Low order portion ) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeBridgePvcStatsTimer | 1.3.6.1.4.1.1751.2.18.12.12.1.11 | ||
| Number of seconds stats have been collecting | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeBridgePvcStatsOdometerCellsEncodedHiA | 1.3.6.1.4.1.1751.2.18.12.12.1.12 | ||
| Cells encoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeBridgePvcStatsOdometerCellsEncodedLoA | 1.3.6.1.4.1.1751.2.18.12.12.1.13 | ||
| Cells encoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeBridgePvcStatsOdometerCellsDecodedHiA | 1.3.6.1.4.1.1751.2.18.12.12.1.14 | ||
| Cells decoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeBridgePvcStatsOdometerCellsDecodedLoA | 1.3.6.1.4.1.1751.2.18.12.12.1.15 | ||
| Cells decoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeBridgePvcStatsOdometerCellsEncodedHiB | 1.3.6.1.4.1.1751.2.18.12.12.1.16 | ||
| Cells encoded on side B - (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeBridgePvcStatsOdometerCellsEncodedLoB | 1.3.6.1.4.1.1751.2.18.12.12.1.17 | ||
| Cells encoded on side B - (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeBridgePvcStatsOdometerCellsDecodedHiB | 1.3.6.1.4.1.1751.2.18.12.12.1.18 | ||
| Cells decoded on side B - (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeBridgePvcStatsOdometerCellsDecodedLoB | 1.3.6.1.4.1.1751.2.18.12.12.1.19 | ||
| Cells decoded on side B - (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeBridgePvcStatsOdometerTimer | 1.3.6.1.4.1.1751.2.18.12.12.1.20 | ||
| Number of seconds since odometer was reset. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeBridgePvcStatsOdometerReset | 1.3.6.1.4.1.1751.2.18.12.12.1.21 | ||
| Odometer reset button. | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| bridgeAtmPvcVccStatsTable | 1.3.6.1.4.1.1751.2.18.12.13 | ||
| Table of statisics | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| BridgeAtmPvcVccStatsEntry | |||
| bridgeAtmPvcVccStatsEntry | 1.3.6.1.4.1.1751.2.18.12.13.1 | ||
| Row definition for the connection statistics table | |||
| OBJECT-TYPE | |||
| BridgeAtmPvcVccStatsEntry | |||
| bridgeAtmPvcVccStatsIfA | 1.3.6.1.4.1.1751.2.18.12.13.1.1 | ||
| Interface index (SSPPCCC) on side A | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| bridgeAtmPvcVccStatsIfB | 1.3.6.1.4.1.1751.2.18.12.13.1.2 | ||
| Interface index (SSPPCCC) on side B | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| bridgeAtmPvcVccStatsVpiB | 1.3.6.1.4.1.1751.2.18.12.13.1.3 | ||
| vpi - side B | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| bridgeAtmPvcVccStatsVciB | 1.3.6.1.4.1.1751.2.18.12.13.1.4 | ||
| vci - side B | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| bridgeAtmPvcVccStatsCellsEncodedHiA | 1.3.6.1.4.1.1751.2.18.12.13.1.5 | ||
| number of cells encoded on side A - (High order portion). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccStatsCellsEncodedLoA | 1.3.6.1.4.1.1751.2.18.12.13.1.6 | ||
| number of cells encoded on side A - (Low order portion). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccStatsCellsDecodedHiA | 1.3.6.1.4.1.1751.2.18.12.13.1.7 | ||
| number of cells decoded on side A - (High order portion). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccStatsCellsDecodedLoA | 1.3.6.1.4.1.1751.2.18.12.13.1.8 | ||
| number of cells decoded on side A - (Low order portion). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccStatsInCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.13.1.9 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccStatsInCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.13.1.10 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccStatsOutCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.13.1.11 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccStatsOutCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.13.1.12 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccStatsTimer | 1.3.6.1.4.1.1751.2.18.12.13.1.13 | ||
| Number of seconds stats have been collecting | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccStatsOdometerCellsEncodedHiA | 1.3.6.1.4.1.1751.2.18.12.13.1.14 | ||
| Cells encoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccStatsOdometerCellsEncodedLoA | 1.3.6.1.4.1.1751.2.18.12.13.1.15 | ||
| Cells encoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccStatsOdometerCellsDecodedHiA | 1.3.6.1.4.1.1751.2.18.12.13.1.16 | ||
| Cells decoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccStatsOdometerCellsDecodedLoA | 1.3.6.1.4.1.1751.2.18.12.13.1.17 | ||
| Cells decoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccStatsInOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.13.1.18 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccStatsInOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.13.1.19 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccStatsOutOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.13.1.20 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccStatsOutOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.13.1.21 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccStatsOdometerTimer | 1.3.6.1.4.1.1751.2.18.12.13.1.22 | ||
| Number of seconds since odometer was reset. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccStatsOdometerReset | 1.3.6.1.4.1.1751.2.18.12.13.1.23 | ||
| Odometer reset button. | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| bridgeAtmPvcVccStatsOamAisTx | 1.3.6.1.4.1.1751.2.18.12.13.1.24 | ||
| Number of AIS cells transmitted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccStatsOamAisRx | 1.3.6.1.4.1.1751.2.18.12.13.1.25 | ||
| Number of AIS cells received. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccStatsOamRdiTx | 1.3.6.1.4.1.1751.2.18.12.13.1.26 | ||
| Number of RDI cells transmitted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccStatsOamRdiRx | 1.3.6.1.4.1.1751.2.18.12.13.1.27 | ||
| Number of RDI cells received. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccStatsCellsDroppedB | 1.3.6.1.4.1.1751.2.18.12.13.1.28 | ||
| Cells Dropped on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeAtmPvcVccStatsCellsTaggedB | 1.3.6.1.4.1.1751.2.18.12.13.1.29 | ||
| Cells Tagged on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmSpvcVccStatsTable | 1.3.6.1.4.1.1751.2.18.12.14 | ||
| Table of statistics for a CES SPVC channel connection | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| CirEmAtmSpvcVccStatsEntry | |||
| cirEmAtmSpvcVccStatsEntry | 1.3.6.1.4.1.1751.2.18.12.14.1 | ||
| Row definition for the CES SPVC connection statistics table | |||
| OBJECT-TYPE | |||
| CirEmAtmSpvcVccStatsEntry | |||
| cirEmAtmSpvcVccStatsIfA | 1.3.6.1.4.1.1751.2.18.12.14.1.1 | ||
| Interface index for side A, the circuit emulation side, of a circuit emulation-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| cirEmAtmSpvcVccStatsIfB | 1.3.6.1.4.1.1751.2.18.12.14.1.2 | ||
| Interface index for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| cirEmAtmSpvcVccStatsVpiB | 1.3.6.1.4.1.1751.2.18.12.14.1.3 | ||
| VPI value for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| cirEmAtmSpvcVccStatsVciB | 1.3.6.1.4.1.1751.2.18.12.14.1.4 | ||
| VCI value for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| cirEmAtmSpvcVccStatsCellsEncodedHiA | 1.3.6.1.4.1.1751.2.18.12.14.1.5 | ||
| Cells encoded on side A - (High order portion ) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmSpvcVccStatsCellsEncodedLoA | 1.3.6.1.4.1.1751.2.18.12.14.1.6 | ||
| Cells encoded on side A - ( Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmSpvcVccStatsCellsDecodedHiA | 1.3.6.1.4.1.1751.2.18.12.14.1.7 | ||
| Cells decoded on side A - ( High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmSpvcVccStatsCellsDecodedLoA | 1.3.6.1.4.1.1751.2.18.12.14.1.8 | ||
| Cells decoded on side A - (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmSpvcVccStatsInCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.14.1.9 | ||
| Valid Cells received on B - (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmSpvcVccStatsInCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.14.1.10 | ||
| Valid Cells received on B - (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmSpvcVccStatsOutCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.14.1.11 | ||
| Valid cells transmitted on B - (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmSpvcVccStatsOutCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.14.1.12 | ||
| Valid cells transmitted on B - (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmSpvcVccStatsTimer | 1.3.6.1.4.1.1751.2.18.12.14.1.13 | ||
| Number of seconds since stats have been collecting | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmSpvcVccStatsOdometerCellsEncodedHiA | 1.3.6.1.4.1.1751.2.18.12.14.1.14 | ||
| Cells encoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmSpvcVccStatsOdometerCellsEncodedLoA | 1.3.6.1.4.1.1751.2.18.12.14.1.15 | ||
| Cells encoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmSpvcVccStatsOdometerCellsDecodedHiA | 1.3.6.1.4.1.1751.2.18.12.14.1.16 | ||
| Cells decoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmSpvcVccStatsOdometerCellsDecodedLoA | 1.3.6.1.4.1.1751.2.18.12.14.1.17 | ||
| Cells decoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmSpvcVccStatsInOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.14.1.18 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmSpvcVccStatsInOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.14.1.19 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmSpvcVccStatsOutOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.14.1.20 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmSpvcVccStatsOutOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.14.1.21 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmSpvcVccStatsOdometerTimer | 1.3.6.1.4.1.1751.2.18.12.14.1.22 | ||
| Number of seconds since odometer was reset. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmSpvcVccStatsOdometerReset | 1.3.6.1.4.1.1751.2.18.12.14.1.23 | ||
| Odometer reset button. | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| cirEmAtmSpvcVccStatsCellsDroppedB | 1.3.6.1.4.1.1751.2.18.12.14.1.24 | ||
| Cells Dropped on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cirEmAtmSpvcVccStatsCellsTaggedB | 1.3.6.1.4.1.1751.2.18.12.14.1.25 | ||
| Cells Tagged on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVccStatsTable | 1.3.6.1.4.1.1751.2.18.12.15 | ||
| Table of statistics for a TE SPVC channel connection. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| VbrAtmSpvcVccStatsEntry | |||
| vbrAtmSpvcVccStatsEntry | 1.3.6.1.4.1.1751.2.18.12.15.1 | ||
| Row definition for the TE SPVC connection statistics table. | |||
| OBJECT-TYPE | |||
| VbrAtmSpvcVccStatsEntry | |||
| vbrAtmSpvcVccStatsIfA | 1.3.6.1.4.1.1751.2.18.12.15.1.1 | ||
| Interface index for side A, the variable bit rate side, of a variable bit rate-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| vbrAtmSpvcVccStatsIfB | 1.3.6.1.4.1.1751.2.18.12.15.1.2 | ||
| Interface index for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| vbrAtmSpvcVccStatsVpiB | 1.3.6.1.4.1.1751.2.18.12.15.1.3 | ||
| VPI value for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| vbrAtmSpvcVccStatsVciB | 1.3.6.1.4.1.1751.2.18.12.15.1.4 | ||
| VCI value for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| vbrAtmSpvcVccStatsCellsEncodedHiA | 1.3.6.1.4.1.1751.2.18.12.15.1.5 | ||
| Cells encoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVccStatsCellsEncodedLoA | 1.3.6.1.4.1.1751.2.18.12.15.1.6 | ||
| ells encoded on side A - (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVccStatsCellsDecodedHiA | 1.3.6.1.4.1.1751.2.18.12.15.1.7 | ||
| Cells decoded on side A - (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVccStatsCellsDecodedLoA | 1.3.6.1.4.1.1751.2.18.12.15.1.8 | ||
| Cells decoded on side A - (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVccStatsInCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.15.1.9 | ||
| Valid Cells received on B - (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVccStatsInCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.15.1.10 | ||
| Valid Cells received on B - (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVccStatsOutCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.15.1.11 | ||
| Valid cells transmitted on B -(High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVccStatsOutCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.15.1.12 | ||
| Valid cells transmitted on B - (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVccStatsTimer | 1.3.6.1.4.1.1751.2.18.12.15.1.13 | ||
| Number of seconds stats have been collecting | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVccStatsOdometerCellsEncodedHiA | 1.3.6.1.4.1.1751.2.18.12.15.1.14 | ||
| Cells encoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVccStatsOdometerCellsEncodedLoA | 1.3.6.1.4.1.1751.2.18.12.15.1.15 | ||
| Cells encoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVccStatsOdometerCellsDecodedHiA | 1.3.6.1.4.1.1751.2.18.12.15.1.16 | ||
| Cells decoded on side A- (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVccStatsOdometerCellsDecodedLoA | 1.3.6.1.4.1.1751.2.18.12.15.1.17 | ||
| Cells decoded on side A- (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVccStatsInOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.15.1.18 | ||
| Valid Cells received on B - (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVccStatsInOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.15.1.19 | ||
| Valid Cells received on B - (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVccStatsOutOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.15.1.20 | ||
| Valid Cells transmitted on B -(High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVccStatsOutOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.15.1.21 | ||
| Valid Cells transmitted on B -(Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVccStatsOdometerTimer | 1.3.6.1.4.1.1751.2.18.12.15.1.22 | ||
| Number of seconds since odometer was reset. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVccStatsOdometerReset | 1.3.6.1.4.1.1751.2.18.12.15.1.23 | ||
| Odometer reset button. | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| vbrAtmSpvcVccStatsCellsDroppedB | 1.3.6.1.4.1.1751.2.18.12.15.1.24 | ||
| Cells Dropped on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| vbrAtmSpvcVccStatsCellsTaggedB | 1.3.6.1.4.1.1751.2.18.12.15.1.25 | ||
| Cells Tagged on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccStatsTable | 1.3.6.1.4.1.1751.2.18.12.16 | ||
| Table of statistics for a ATM SPVC channel connection | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmSpvcVccStatsEntry | |||
| atmSpvcVccStatsEntry | 1.3.6.1.4.1.1751.2.18.12.16.1 | ||
| Row definition for the ATM SPVC connection statistics table | |||
| OBJECT-TYPE | |||
| AtmSpvcVccStatsEntry | |||
| atmSpvcVccStatsIfA | 1.3.6.1.4.1.1751.2.18.12.16.1.1 | ||
| Interface index for side A of an ATM-to-ATM PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmSpvcVccStatsVpiA | 1.3.6.1.4.1.1751.2.18.12.16.1.2 | ||
| VPI value for side A of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmSpvcVccStatsVciA | 1.3.6.1.4.1.1751.2.18.12.16.1.3 | ||
| VCI value for side A of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmSpvcVccStatsIfB | 1.3.6.1.4.1.1751.2.18.12.16.1.4 | ||
| Interface index for side B of an ATM-to-ATM PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmSpvcVccStatsVpiB | 1.3.6.1.4.1.1751.2.18.12.16.1.5 | ||
| VPI value for side B of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmSpvcVccStatsVciB | 1.3.6.1.4.1.1751.2.18.12.16.1.6 | ||
| VCI value for side B of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmSpvcVccStatsInCellCountHiA | 1.3.6.1.4.1.1751.2.18.12.16.1.7 | ||
| Valid Cells received on A - (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccStatsInCellCountLoA | 1.3.6.1.4.1.1751.2.18.12.16.1.8 | ||
| Valid Cells received on A - (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccStatsOutCellCountHiA | 1.3.6.1.4.1.1751.2.18.12.16.1.9 | ||
| Valid cells transmitted on A -(High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccStatsOutCellCountLoA | 1.3.6.1.4.1.1751.2.18.12.16.1.10 | ||
| Valid cells transmitted on A -(Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccStatsInCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.16.1.11 | ||
| Valid Cells received on B - (High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccStatsInCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.16.1.12 | ||
| Valid Cells received on B - (Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccStatsOutCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.16.1.13 | ||
| Valid cells transmitted on B -(High order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccStatsOutCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.16.1.14 | ||
| Valid cells transmitted on B -(Low order portion) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccStatsTimer | 1.3.6.1.4.1.1751.2.18.12.16.1.15 | ||
| Number of seconds stats have been collecting | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccStatsFrwdErrCrrctnRateA2B | 1.3.6.1.4.1.1751.2.18.12.16.1.16 | ||
| Displays the Forward error correction rate being used by the FEC module in the A2B direction. This field is dynamic when Auto rates are selected. In other cases, it will display the rate set by the user. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), eighthRate(2), quarterRate(3), halfRate(4) | ||
| atmSpvcVccStatsFrwdErrCrrctnRateB2A | 1.3.6.1.4.1.1751.2.18.12.16.1.17 | ||
| Displays the Forward error correction rate being used by the FEC module in the B2A direction. This field is dynamic when Auto rates are selected. In other cases, it will display the rate set by the user. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), eighthRate(2), quarterRate(3), halfRate(4) | ||
| atmSpvcVccStatsInOdometerCellCountHiA | 1.3.6.1.4.1.1751.2.18.12.16.1.18 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccStatsInOdometerCellCountLoA | 1.3.6.1.4.1.1751.2.18.12.16.1.19 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccStatsOutOdometerCellCountHiA | 1.3.6.1.4.1.1751.2.18.12.16.1.20 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccStatsOutOdometerCellCountLoA | 1.3.6.1.4.1.1751.2.18.12.16.1.21 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccStatsInOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.16.1.22 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccStatsInOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.16.1.23 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccStatsOutOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.16.1.24 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccStatsOutOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.16.1.25 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccStatsOdometerTimer | 1.3.6.1.4.1.1751.2.18.12.16.1.26 | ||
| Number of seconds since odometer was reset. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccStatsOdometerReset | 1.3.6.1.4.1.1751.2.18.12.16.1.27 | ||
| Odometer reset button. | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| atmSpvcVccStatsCellsDroppedA | 1.3.6.1.4.1.1751.2.18.12.16.1.28 | ||
| Cells Dropped on the Incoming side of A | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccStatsCellsTaggedA | 1.3.6.1.4.1.1751.2.18.12.16.1.29 | ||
| Cells Tagged on the Incoming side of A | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccStatsCellsDroppedB | 1.3.6.1.4.1.1751.2.18.12.16.1.30 | ||
| Cells Dropped on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmSpvcVccStatsCellsTaggedB | 1.3.6.1.4.1.1751.2.18.12.16.1.31 | ||
| Cells Tagged on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlStatsTable | 1.3.6.1.4.1.1751.2.18.12.17 | ||
| The table which holds viprSubChnlStatsEntry data. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ViprSubChnlStatsEntry | |||
| viprSubChnlStatsEntry | 1.3.6.1.4.1.1751.2.18.12.17.1 | ||
| A table entry that contains IP interface sub channel statistics. | |||
| OBJECT-TYPE | |||
| ViprSubChnlStatsEntry | |||
| viprSubChnlStatsInCellCountHiA | 1.3.6.1.4.1.1751.2.18.12.17.1.1 | ||
| cells received on rt interface from another conn | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlStatsInCellCountLoA | 1.3.6.1.4.1.1751.2.18.12.17.1.2 | ||
| cells received on rt interface from another conn | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlStatsOutCellCountHiA | 1.3.6.1.4.1.1751.2.18.12.17.1.3 | ||
| cells sent out of a rt interface to another dest | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlStatsOutCellCountLoA | 1.3.6.1.4.1.1751.2.18.12.17.1.4 | ||
| cells sent out of a rt interface to another dest | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlStatsInCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.17.1.5 | ||
| cells received on atm/fr/bridge physical interface | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlStatsInCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.17.1.6 | ||
| cells received on atm/fr/bridge physical interface | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlStatsOutCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.17.1.7 | ||
| cell transmitted out of a physical atm/fr/bridge interface | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlStatsOutCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.17.1.8 | ||
| cell transmitted out of a physical atm/fr/bridge interface | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlStatsTimer | 1.3.6.1.4.1.1751.2.18.12.17.1.9 | ||
| Number of seconds stats have been collecting | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlStatsInOdometerCellCountHiA | 1.3.6.1.4.1.1751.2.18.12.17.1.10 | ||
| odometer cells received on rt interface from another conn | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlStatsInOdometerCellCountLoA | 1.3.6.1.4.1.1751.2.18.12.17.1.11 | ||
| odometer cells received on rt interface from another conn | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlStatsOutOdometerCellCountHiA | 1.3.6.1.4.1.1751.2.18.12.17.1.12 | ||
| odometer cells sent out of a rt interface to another dest | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlStatsOutOdometerCellCountLoA | 1.3.6.1.4.1.1751.2.18.12.17.1.13 | ||
| odometer cells sent out of a rt interface to another dest | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlStatsInOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.17.1.14 | ||
| odometer cells received on atm/fr/bridge physical interface | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlStatsInOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.17.1.15 | ||
| odometer cells received on atm/fr/bridge physical interface | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlStatsOutOdometerCellCountHiB | 1.3.6.1.4.1.1751.2.18.12.17.1.16 | ||
| odometer cells transmitted out of a physical atm/fr/bridge interface | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlStatsOutOdometerCellCountLoB | 1.3.6.1.4.1.1751.2.18.12.17.1.17 | ||
| odometer cells transmitted out of a physical atm/fr/bridge interface | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlStatsOdometerTimer | 1.3.6.1.4.1.1751.2.18.12.17.1.18 | ||
| Odometer Number of seconds stats have been collecting | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlStatsOdometerReset | 1.3.6.1.4.1.1751.2.18.12.17.1.19 | ||
| to reset the subchannel statistics | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| viprSubChnlStatsCellsDroppedB | 1.3.6.1.4.1.1751.2.18.12.17.1.20 | ||
| Cells Dropped on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlStatsCellsTaggedB | 1.3.6.1.4.1.1751.2.18.12.17.1.21 | ||
| Cells Tagged on the Incoming side of B | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAtmGroup | 1.3.6.1.4.1.1751.2.18.13 | ||
| OBJECT IDENTIFIER | |||
| ipAtmArpSrvConnType | 1.3.6.1.4.1.1751.2.18.13.1 | ||
| type of Arp Server connection | |||
| OBJECT-TYPE | |||
| INTEGER | pvc(1), svc(2), none(3) | ||
| ipAtmIpAddr | 1.3.6.1.4.1.1751.2.18.13.2 | ||
| Local IP Address | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| ipAtmIpMask | 1.3.6.1.4.1.1751.2.18.13.3 | ||
| Local IP Mask | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| atmArpTable | 1.3.6.1.4.1.1751.2.18.13.4 | ||
| ARP Table | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmArpEntry | |||
| atmArpEntry | 1.3.6.1.4.1.1751.2.18.13.4.1 | ||
| ARP Table entry | |||
| OBJECT-TYPE | |||
| AtmArpEntry | |||
| atmArpIpAddress | 1.3.6.1.4.1.1751.2.18.13.4.1.1 | ||
| IP address of the IP host described in APR table entry. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| atmArpAtmAddress | 1.3.6.1.4.1.1751.2.18.13.4.1.2 | ||
| ATM address of the IP host. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(20) | ||
| atmArpAddrType | 1.3.6.1.4.1.1751.2.18.13.4.1.3 | ||
| Type of ATM address value of atmArp address. | |||
| OBJECT-TYPE | |||
| INTEGER | nsap(1), e164(2), e164nsap(3) | ||
| atmArpEntryState | 1.3.6.1.4.1.1751.2.18.13.4.1.4 | ||
| State of this entry. | |||
| OBJECT-TYPE | |||
| INTEGER | valid(1), invalid(2), unconnected(3), permanent(4), pendingAtmAddr(5), pendingIpAddr(6), pendingConnect(7) | ||
| atmArpEntryRowStatus | 1.3.6.1.4.1.1751.2.18.13.4.1.5 | ||
| RowStatus of this entry. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| appIpRouteTable | 1.3.6.1.4.1.1751.2.18.13.5 | ||
| Application IP Routing table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AppIpRouteEntry | |||
| appIpRouteEntry | 1.3.6.1.4.1.1751.2.18.13.5.1 | ||
| A route to a particular destination. | |||
| OBJECT-TYPE | |||
| AppIpRouteEntry | |||
| appIpRouteDest | 1.3.6.1.4.1.1751.2.18.13.5.1.1 | ||
| The destination IP address of this route. An entry with a value of 0.0.0.0 is not valid route. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| appIpRouteMask | 1.3.6.1.4.1.1751.2.18.13.5.1.2 | ||
| Mask for Ip route, usefull only for SENS stack VxWorks | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| appIpRouteMetric1 | 1.3.6.1.4.1.1751.2.18.13.5.1.3 | ||
| The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the routes appIpRouteProto value. If this metric is not used, its value should be set to 1. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| appIpRouteNextHop | 1.3.6.1.4.1.1751.2.18.13.5.1.4 | ||
| The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.) | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| appIpRouteState | 1.3.6.1.4.1.1751.2.18.13.5.1.5 | ||
| Current state of route | |||
| OBJECT-TYPE | |||
| INTEGER | invalid(0), inuse(1), notinuse(2), error(3) | ||
| iispRouting | 1.3.6.1.4.1.1751.2.18.14 | ||
| OBJECT IDENTIFIER | |||
| iispCbrRoutTable | 1.3.6.1.4.1.1751.2.18.14.1 | ||
| IISP CBR Routing Table | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| IispCbrRoutEntry | |||
| iispCbrRoutEntry | 1.3.6.1.4.1.1751.2.18.14.1.1 | ||
| IISP CBR Table Entry | |||
| OBJECT-TYPE | |||
| IispCbrRoutEntry | |||
| iispCbrRoutLength | 1.3.6.1.4.1.1751.2.18.14.1.1.1 | ||
| length in bits | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| iispCbrRoutNsapAddr | 1.3.6.1.4.1.1751.2.18.14.1.1.2 | ||
| nsap address | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1..20) | ||
| iispCbrRoutIfIndex | 1.3.6.1.4.1.1751.2.18.14.1.1.3 | ||
| Interface index - SSPPCCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| iispCbrRoutRowStatus | 1.3.6.1.4.1.1751.2.18.14.1.1.4 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| iispVbrRoutTable | 1.3.6.1.4.1.1751.2.18.14.2 | ||
| IISP CBR Routing Table | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| IispVbrRoutEntry | |||
| iispVbrRoutEntry | 1.3.6.1.4.1.1751.2.18.14.2.1 | ||
| IISP CBR Table Entry | |||
| OBJECT-TYPE | |||
| IispVbrRoutEntry | |||
| iispVbrRoutLength | 1.3.6.1.4.1.1751.2.18.14.2.1.1 | ||
| length in bits | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| iispVbrRoutNsapAddr | 1.3.6.1.4.1.1751.2.18.14.2.1.2 | ||
| nsap address | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1..20) | ||
| iispVbrRoutIfIndex | 1.3.6.1.4.1.1751.2.18.14.2.1.3 | ||
| Interface index - SSPPCCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| iispVbrRoutRowStatus | 1.3.6.1.4.1.1751.2.18.14.2.1.4 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| iispCbrRouteTable | 1.3.6.1.4.1.1751.2.18.14.3 | ||
| IISP CBR Routing Table | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| IispCbrRouteEntry | |||
| iispCbrRouteEntry | 1.3.6.1.4.1.1751.2.18.14.3.1 | ||
| IISP CBR Route Entry | |||
| OBJECT-TYPE | |||
| IispCbrRouteEntry | |||
| iispCbrRouteLength | 1.3.6.1.4.1.1751.2.18.14.3.1.1 | ||
| length in bits | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| iispCbrRouteNsapAddr | 1.3.6.1.4.1.1751.2.18.14.3.1.2 | ||
| nsap address | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1..20) | ||
| iispCbrRouteIfIndex | 1.3.6.1.4.1.1751.2.18.14.3.1.3 | ||
| Interface index - SSPPCCC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| iispCbrRouteRowStatus | 1.3.6.1.4.1.1751.2.18.14.3.1.4 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| iispCbrRouteIfVuniId | 1.3.6.1.4.1.1751.2.18.14.3.1.5 | ||
| Virtual UNI interface VUNI Id | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| iispCbrRouteType | 1.3.6.1.4.1.1751.2.18.14.3.1.6 | ||
| Type of Route, Categorisation of an Endpoint Route or an intermediate Route | |||
| OBJECT-TYPE | |||
| INTEGER | drmRouteTypeAny(0), drmRouteTypeAtm(1), drmRouteTypeIisp(2), drmRouteTypeIlmiUser(3), drmRouteTypeIsdn(11), drmRouteTypeCe(21), drmRouteTypeSs7(31), drmRouteTypeFr(41), drmRouteTypeCasTrunk(51), drmRouteTypeEndPtAtm(132), drmRouteTypeEndPtCe(133), drmRouteTypeEndPtTe(134), drmRouteTypeEndPtIsdn(135), drmRouteTypeEndPtIp(136), drmRouteTypeEndPtFr(137) | ||
| iispCbrRouteDest | 1.3.6.1.4.1.1751.2.18.14.3.1.7 | ||
| Type of Destination, Categorisation of an Endpoint destination or an intermediate destination | |||
| OBJECT-TYPE | |||
| INTEGER | drmRouteDestAny(0), drmRouteDestAtm(1), drmRouteDestIsdn(2), drmRouteDestCe(3), drmRouteDestSs7(4), drmRouteDestFr(5), drmRouteDestAalIwf(6), drmRouteDestEndPtAtm(15), drmRouteDestEndPtCe(16), drmRouteDestEndPtTe(17), drmRouteDestEndPtIsdn(18), drmRouteTypeEndPtIp(19), drmRouteTypeEndPtFr(20), drmRouteTypeEndPtCas(21) | ||
| iispVbrRouteTable | 1.3.6.1.4.1.1751.2.18.14.4 | ||
| IISP CBR Routing Table | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| IispVbrRouteEntry | |||
| iispVbrRouteEntry | 1.3.6.1.4.1.1751.2.18.14.4.1 | ||
| IISP CBR Table Entry | |||
| OBJECT-TYPE | |||
| IispVbrRouteEntry | |||
| iispVbrRouteLength | 1.3.6.1.4.1.1751.2.18.14.4.1.1 | ||
| length in bits | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| iispVbrRouteNsapAddr | 1.3.6.1.4.1.1751.2.18.14.4.1.2 | ||
| nsap address | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1..20) | ||
| iispVbrRouteIfIndex | 1.3.6.1.4.1.1751.2.18.14.4.1.3 | ||
| In most cases, it is the I/O Interface index - SSPPCCC. However, in case of ATM Trunking's Narrowband routing and Broadband routing, this is either the CAS trunk group ID, or the remote IWF ID, which are 1 to 3 digits decimal numbers | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| iispVbrRouteRowStatus | 1.3.6.1.4.1.1751.2.18.14.4.1.4 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| iispVbrRouteIfVuniId | 1.3.6.1.4.1.1751.2.18.14.4.1.5 | ||
| Virtual UNI interface VUNI Id | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| iispVbrRouteType | 1.3.6.1.4.1.1751.2.18.14.4.1.6 | ||
| Type of Route, Categorisation of an Endpoint Route or an intermediate Route | |||
| OBJECT-TYPE | |||
| INTEGER | drmRouteTypeAny(0), drmRouteTypeAtm(1), drmRouteTypeIisp(2), drmRouteTypeIlmiUser(3), drmRouteTypeIsdn(11), drmRouteTypeCe(21), drmRouteTypeSs7(31), drmRouteTypeFr(41), drmRouteTypeCasTrunk(51), drmRouteTypeIwfTrunk(61), drmRouteTypeEndPtAtm(132), drmRouteTypeEndPtCe(133), drmRouteTypeEndPtTe(134), drmRouteTypeEndPtIsdn(135), drmRouteTypeEndPtIp(136), drmRouteTypeEndPtFr(137) | ||
| iispVbrRouteDest | 1.3.6.1.4.1.1751.2.18.14.4.1.7 | ||
| Type of Destination, Categorisation of an Endpoint destination or an intermediate destination | |||
| OBJECT-TYPE | |||
| INTEGER | drmRouteDestAny(0), drmRouteDestAtm(1), drmRouteDestIsdn(2), drmRouteDestCe(3), drmRouteDestSs7(4), drmRouteDestFr(5), drmRouteDestAalIwf(6), drmRouteDestEndPtAny(14), drmRouteDestEndPtAtm(15), drmRouteDestEndPtCe(16), drmRouteDestEndPtTe(17), drmRouteDestEndPtIsdn(18), drmRouteTypeEndPtIp(19), drmRouteTypeEndPtFr(20), drmRouteTypeEndPtCas(21), drmRouteTypeEndPtTrkIwf(22) | ||
| returnCode | 1.3.6.1.4.1.1751.2.18.15 | ||
| OBJECT IDENTIFIER | |||
| pvcFailureReasonCode | 1.3.6.1.4.1.1751.2.18.15.1 | ||
| An identified reason why an ATM PVC connection request failed. aal2CuTimerOutOfRange(298): this error code is generated when the aal2CuTimer value is out of range and the valid reanges is 0 to 8 (0 - 40 msec of delay). unrecognizableDigitCollectTypeA2B(299): unrecognizable digital tone set in connection A2B direction. unrecognizableDigitCollectTypeB2A(300): unrecognizable digital tone set in connection B2A direction. | |||
| OBJECT-TYPE | |||
| INTEGER | vpiVciUnavailableA2B(1), vpiVciUnavailableB2A(2), bandwidthUnavailableA2B(3), bandwidthUnavailableB2A(4), qosUnavailableA2B(5), qosUnavailableB2A(6), internalResourceUnavailable(7), cantUseSignalingChnlIgrsA2B(8), cantUseSignalingChnlEgrsA2B(9), cantUseSignalingChnlIgrsB2A(10), cantUseSignalingChnlEgrsB2A(11), cantUseManagementChnlIgrsA2B(12), cantUseManagementChnlEgrsA2B(13), cantUseManagementChnlIgrsB2A(14), cantUseManagementChnlEgrsB2A(15), vcLessThanVcMinIgrsA2B(16), vcLessThanVcMinEgrsA2B(17), vcLessThanVcMinIgrsB2A(18), vcLessThanVcMinEgrsB2A(19), vcGreaterThanVcMaxIgrsA2B(20), vcGreaterThanVcMaxEgrsA2B(21), vcGreaterThanVcMaxIgrsB2A(22), vcGreaterThanVcMaxEgrsB2A(23), vpLessThanVpMinIgrsA2B(24), vpLessThanVpMinEgrsA2B(25), vpLessThanVpMinIgrsB2A(26), vpLessThanVpMinEgrsB2A(27), vpGreaterThanVpMaxIgrsA2B(28), vpGreaterThanVpMaxEgrsA2B(29), vpGreaterThanVpMaxIgrsB2A(30), vpGreaterThanVpMaxEgrsB2A(31), vpGreaterThanVpMaxIispIgrsA2B(32), vpGreaterThanVpMaxIispEgrsA2B(33), vpGreaterThanVpMaxIispIgrsB2A(34), vpGreaterThanVpMaxIispEgrsB2A(35), rsvdChnlRangeIgrsA2B(36), rsvdChnlRangeEgrsA2B(37), rsvdChnlRangeIgrsB2A(38), rsvdChnlRangeEgrsB2A(39), internalSrvcTypeUnavailableA2B(40), internalSrvcTypeUnavailableB2A(41), unrecognizableBindTypeEgrsA2B(42), unrecognizableBindTypeEgrsB2A(43), callWithoutConnections(44), callDataStructuresUnavailable(45), cnctnDataStructuresUnavailable(46), nullTrafficParametersRejectedA2B(47), nullTrafficParametersRejectedB2A(48), vpiWithinSvcRangeIgrsA2B(49), vpiWithinSvcRangeEgrsA2B(50), vpiWithinSvcRangeIgrsB2A(51), vpiWithinSvcRangeEgrsB2A(52), vpiInReservedListA2B(53), vpiInReservedListB2A(54), vpiInPvcListA2B(55), vpiInPvcListB2A(56), vpiInReleasedListA2B(57), vpiInReleasedListB2A(58), vciIsNotNullInVpcIgrsA2B(59), vciIsNotNullInVpcEgrsA2B(60), vciIsNotNullInVpcIgrsB2A(61), vciIsNotNullInVpcEgrsB2A(62), vpiInVpcReservedListA2B(63), vpiInVpcReservedListB2A(64), vpiVciInReservedListA2B(65), vpiVciInReservedListB2A(66), vpiInVpcPvcListA2B(67), vpiInVpcPvcListB2A(68), vpiVciInPvcListA2B(69), vpiVciInPvcListB2A(70), vpiInVpcReleasedListA2B(71), vpiInVpcReleasedListB2A(72), vpiVciInReleasedListA2B(73), vpiVciInReleasedListB2A(74), illegalMulticaseIdA2B(75), illegalMulticaseIdB2A(76), unsupportedConnectionA2B(77), unsupportedConnectionB2A(78), connectionsUnavailableInModuleA2B(79), connectionsUnavailableInModuleB2A(80), cbrBandwidthUnavailableIgrsA2B(81), cbrBandwidthUnavailableEgrsA2B(82), cbrBandwidthUnavailableIgrsB2A(83), cbrBandwidthUnavailableEgrsB2A(84), vbrBandwidthUnavailableIgrsA2B(85), vbrBandwidthUnavailableEgrsA2B(86), vbrBandwidthUnavailableIgrsB2A(87), vbrBandwidthUnavailableEgrsB2A(88), vpiVciWithinSvcRangeIgrsA2B(89), vpiVciWithinSvcRangeEgrsA2B(90), vpiVciWithinSvcRangeIgrsB2A(91), vpiVciWithinSvcRangeEgrsB2A(92), multicastDataStructuresUnavailable(93), semaphoreTimeout(94), dlciFoundInReservedList(95), dlciFoundInPvcList(96), dlciFoundInReleasedList(97), invalidDlci(98), slotA-OutOfRange(99), portA-OutOfRange(100), channelA-OutOfRange(101), moduleA-Uninitialized(102), physicalPortA-Uninitialized(103), channelA-NotBound(104), moduleA-UnrecognizablePortType(105), slotB-OutOfRange(106), portB-OutOfRange(107), channelB-OutOfRange(108), moduleB-Uninitialized(109), physicalPortB-Uninitialized(110), channelB-NotBound(111), moduleB-UnrecognizablePortType(112), interfaceA-NotAtm(113), interfaceB-NotAtm(114), unrecognizableServiceTypeA2B(115), unrecognizableServiceTypeB2A(116), unrecognizableSarTypeA2B(117), unrecognizableSarTypeB2A(118), interfaceA-NotCircuitEmulation(119), interfaceB-NotCircuitEmulation(120), unrecognizableSilenceDetectionMode(121), unrecognizableEchoCancellationMode(122), unrecognizableVoiceCompressionMode(123), interfaceA-NotVbr(124), interfaceB-NotVbr(125), interfaceA-NotFrameRelay(126), interfaceB-NotFrameRelay(127), interfaceA-InHdlcPvcList(128), interfaceA-InHdlcReleasedList(129), interfaceA-InHdlcReservedList(130), interfaceA-InTerminalEmulationPvcList(131), interfaceA-InTerminalEmulationReleasedList(132), interfaceA-InTerminalEmulationReservedList(133), interfaceA-InCircuitEmulationPvcList(134), interfaceA-InCircuitEmulationReleasedList(135), interfaceA-InCircuitEmulationReservedList(136), notNullVpcInNoisyLinkA2BIgrs(137), notNullVpcInNoisyLinkA2BEgrs(138), invalidVccInNoisyLinkA2BIgrs(139), invalidVccInNoisyLinkA2BEgrs(140), unsupportedFrwdErrCorrectValueA2B(141), interfaceB-InHdlcPvcList(142), interfaceB-InHdlcReleasedList(143), interfaceB-InHdlcReservedList(144), interfaceB-InTerminalEmulationPvcList(145), interfaceB-InTerminalEmulationReleasedList(146), interfaceB-InTerminalEmulationReservedList(147), interfaceB-InCircuitEmulationPvcList(148), interfaceB-InCircuitEmulationReleasedList(149), interfaceB-InCircuitEmulationReservedList(150), notNullVpcInNoisyLinkB2AIgrs(151), notNullVpcInNoisyLinkB2AEgrs(152), invalidVccInNoisyLinkB2AIgrs(153), invalidVccInNoisyLinkB2AEgrs(154), unsupportedFrwdErrCorrectValueB2A(155), interfaceInUse(156), unsupportedFrwdErrCorrectSettings(157), unsupportedFlowSettings(158), frwdErrCorrectResourceInternalError(159), unsupportedConnection(160), ipDestAddrSubnetAInReservedList(161), ipDestAddrSubnetAInPvcList(162), ipDestAddrSubnetAInReleasedList(163), ipDestAddrSubnetBInReservedList(164), ipDestAddrSubnetBInPvcList(165), ipDestAddrSubnetBInReleasedList(166), notCpuIpInterfaceA(167), ipResourceUnavailable(168), fecAutoInSimplexNotValid(169), fecResourceUnavailable(170), notBridgeInterfaceA(171), notBridgeInterfaceB(172), invalidBridgePortA2B(173), invalidBridgePortB2A(174), interfaceAInBridgePvcList(175), interfaceBInBridgePvcList(176), interfaceAInBridgeReleasedList(177), interfaceBInBridgeReleasedList(178), interfaceAInBridgeReservedList(179), interfaceBInBridgeReservedList(180), invalidDlciA(181), invalidDlciB(182), unrecognizableServiceType(183), moduleAMcstNotSupported(184), moduleBMcstNotSupported(185), moduleAMultiPortMcstNotSupported(186), moduleBMultiPortMcstNotSupported(187), bcBeCirCannotBeNullA2B(188), bcBeCirCannotBeNullB2A(189), bcBeOrCirValTooHiA2B(190), bcBeOrCirValTooHiB2A(191), bcNotValidA2B(192), bcNotValidB2A(193), beNotValidA2B(194), beNotValidB2A(195), bcOrCirNotValidA2B(196), bcOrCirNotValidB2A(197), iWF-NotSupportedModuleA(198), iWF-NotSupportedModuleB(199), invalidMaxFrSizeA2B(200), invalidMaxFrSizeB2A(201), invalidSARType(202), unrecognizableSilenceDetectionModeA2B(203), unrecognizableEchoCancellationModeA2B(204), unrecognizableVoiceCompressionModeA2B(205), unrecognizableCallingToneDetectionA2B(206), unrecognizableCodingTranslationA2B(207), unrecognizableSilenceDetectionModeB2A(208), unrecognizableEchoCancellationModeB2A(209), unrecognizableVoiceCompressionModeB2A(210), unrecognizableCallingToneDetectionB2A(211), unrecognizableCodingTranslationB2A(212), dspUnsupportedForMultiCastConns(213), dspResourceUnavailable(214), destOrSrcCannotBeDSPCard(215), internalDSPResourceError(216), echoCancellationOnlySupportedForDuplex(217), cirEmCirEm-ThruPutMismatch(218), vi-Cannot-Be-0(219), vi-OOR(220), vi-Mod-Limit-Exceeded(221), vi-Resource-Unavail(222), vi-Already-Exists(223), vi-Does-Not-Exist(224), vi-0-Non-Ubr-Conn-Not-Supp(225), vi-OS-Cannot-Be-0(226), vi-OS-OOR(227), vi-CellRate-Too-Lo(228), vi-CellRate-Too-Hi(229), intf-CBR-CellRate-Exceeded(230), intf-VBR-CellRate-Exceeded(231), vi-Conn-CellRate-Exceeded(232), vi-Not-Enabled(233), vi-Should-Be-0(234), vi-OOR-A(235), vi-OOR-B(236), vi-0-Non-Ubr-Conn-Not-SuppA2B(237), vi-0-Non-Ubr-Conn-Not-SuppB2A(238), vi-Should-Be-0-A(239), vi-Should-Be-0-B(240), vi-Cbr-Bw-Unavailable-Egrs(241), vi-Cbr-Bw-Unavailable-Egrs-A(242), vi-Cbr-Bw-Unavailable-Egrs-B(243), vi-Vbr-Bw-Unavailable-Egrs(244), vi-Vbr-Bw-Unavailable-Egrs-A(245), vi-Vbr-Bw-Unavailable-Egrs-B(246), vi-Not-Enabled-A(247), vi-Not-Enabled-B(248), pcrLessThanScr(249), cnfrmTypeNotValidA2B(250), cnfrmTypeNotValidB2A(251), cnfrmType-ServiceType-Mismatch-A2B(252), cnfrmType-ServiceType-Mismatch-B2A(253), vuni-Should-Be-0(254), vuni-Not-Enabled(255), vuni-OOR(256), vuni-Already-Exists(257), vuni-Does-Not-Exist(258), vuni-Does-Not-Match-vi(259), vuni-Should-Be-0-A(260), vuni-Not-Enabled-A(261), vuni-OOR-A(262), vuni-Already-Exists-A(263), vuni-Does-Not-Exist-A(264), vuni-Does-Not-Match-vi-A(265), vuni-Should-Be-0-B(266), vuni-Not-Enabled-B(267), vuni-OOR-B(268), vuni-Already-Exists-B(269), vuni-Does-Not-Exist-B(270), vuni-Does-Not-Match-vi-B(271), vuni-Vpi-OOR(272), vuni-Vpi-OOR-A(273), vuni-Vpi-OOR-B(274), stdAal2TrunkResourceUnavailable(275), stdAal2Dsp2ResourceUnavailable(276), slotStdAal2ResourceUavailable(277), stdAal2CIDAlreadyInUse(278), stdAal2TrunkBWUavailableEgrs(279), stdAal2TrunkBWUavailableIgrs(280), stdAal2CIDInRsvRange(281), stdAal2TrunkNotSetup(282), aal2CIDOutOfRange(283), dhpvcSwitchOver-PrimToBkup(284), dhpvcSwitchOver-PrimToNone(285), dhpvcSwitchOver-NoneToPrim(286), dhpvcSwitchOver-NoneToBkup(287), dhpvcSwitchOver-BkupToNone(288), dhpvcSwitchOver-BkupToPrim(289), dhpvcState-Prim-Pass-Fail-Bkup-Act-NoFail(290), dhpvcState-Prim-Pass-NoFail-Bkup-Act-NoFail(291), dhpvcState-Prim-Act-NoFail-Bkup-Pass-Fail(292), dhpvcState-Prim-Act-NoFail-Bkup-Pass-NoFail(293), pcrGreaterThanLinkSpeedIngrA2B(294), pcrGreaterThanLinkSpeedIngrB2A(295), pcrGreaterThanLinkSpeedEgrA2B(296), pcrGreaterThanLinkSpeedEgrB2A(297), aal2CuTimerOutOfRange(298), unrecognizableDigitCollectTypeA2B(299), unrecognizableDigitCollectTypeB2A(300), queueTypeSarTypeMismatchA2B(301), queueTypeSarTypeMismatchB2A(302), pcrLessThanOrEqualToMcrA2B(303), pcrLessThanOrEqualToMcrB2A(304) | ||
| interfaceIndex | 1.3.6.1.4.1.1751.2.18.15.2 | ||
| Interface index used for identifcation in traps. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| interfaceType | 1.3.6.1.4.1.1751.2.18.15.3 | ||
| Interface type used for identification in traps. A specific interface is associated with each number. atmUni3-0(1) ATM User Network Interface version 3.0 atmUni3-1(2) ATM User Network Interface version 3.1 iispUser(3) Interim Inter Switch Protocol User Side iispNetwork(4) Interim Inter Switch Protocol Network Side circuitEmulation(5) ATM Circuit Emulation frameRelayUni(6) Frame Relay User Network Interface pri-isdn-user(7) Integrated Services Digital Network Primary Rate Interface User Interface pri-isdn-network(8) Integrated Services Digital Network Primary Rate Interface Network Interface terminalEmulation(9) Terminal Emulation dsp(10) DSP hdlcPassThrough(11) High Level Data Link Control Pass Through Interface bridge(12) Ethernet Bridge routing(13) Ethernet Routing dbCirEm(14) Dynamic Bandwidth Circuit Emulation frameRelayNni(15) Frame Relay Network Network Interface dsp2(16) DSP2 atmIma(17) ATM Inverse Multiplexing over ATM (IMA) atmPnni1-0(18) ATM Private Network Network Interface Version 1.0 atmUni4-0(19) ATM User Network Interface Version 4.0 atmVnnUni3-1(20) ATM Virtual Network Navigator User Network Interface Version 3.1 casTrunkLine(21) Channel Associated Signaling Trunk Line Interface toneAnnce(22) Tone Announcement Interface gr303(23) GR303 | |||
| OBJECT-TYPE | |||
| INTEGER | atmUni3-0(1), atmUni3-1(2), iispUser(3), iispNetwork(4), circuitEmulation(5), frameRelayUni(6), pri-isdn-user(7), pri-isdn-network(8), terminalEmulation(9), dsp(10), hdlcPassThrough(11), bridge(12), routing(13), dbCirEm(14), frameRelayNni(15), dsp2(16), atmIma(17), atmPnni1-0(18), atmUni4-0(19), atmVnnUni3-1(20), casTrunkLine(21), toneAnnce(22), gr303(23) | ||
| interfaceFailureReasonCode | 1.3.6.1.4.1.1751.2.18.15.4 | ||
| Identification of cause for failure in changing the status of an interface. interfaceInService(1) Most, if not all, modifications require that the interface be out of service. interfaceNotNew(2) Some modifications require that the interface must never have been in service. interfaceExists(3) Some modifications, such as setting the interface type, require that no interface exists. (type must be unconfigured). bridgeGroupActive(4) For setting the bridgeDomainNumber in bridge or router interfaces. to add an interface to a bridgeGroup, the bridgeGroup must be in service. signalingNotEnabled(5) For this interface to be created, signaling must be enabled. firmwareOutOfDate(6) The firmware for the i/o card does not work with this interface. t1SigEnableInterfaceNotSupported(7) The interface is not supported if T1 signaling is enabled ts16ForData(8) ts16 has been set for passing data and the user attempts to turn on signaling. dbcesConfigured(9) Signaling cannot be disabled because this interface is configured as dbces. signalingEnabled(10) Signaling is on for at least one of the channels while trying to change e1 TS16 from CAS to CCS. cmCardTypeNotSupported(11) CM_NET interface is only supported by DS3 DS1 OC3 and SUPER_DS1 cards cmMultipleIntfNotSupported(12) only one interface can be configured as CM_NET cmIntfInService(13) CM_NET interface is in-service cmInterfaceConfigured(14) CM_NET interface is configured channelizationEnabled(15) A port can not be channelized in order to support unstructured CE. unstructuredCEConfigured(16) A port which has been channelized can not be configured to support unstructured CE. firmwareOutOfDate-ts16CAS-unsupported(17) ts16CAS is not supported by the firmware firmwareOutOfDate-interfaceType-unsupported(18) interface type is not supported by the firmware firmwareOutOfDate-ts16-unsupported(19) ts16 is not supported by the firmware invalidPortMap(20) invalid port map otherInterfacesExistOnThisPort(21) ISDN interface needs all 24 channels on the port. If any of the channels on that interface are already configured, the ISDN interface can not be defined on that port. intfInIMAgroup(22) chanId bit in portMap is 1 errorCTC-portTxClkSrc-notLocal(23) if imaGrpChannelNeTxClkMode is set to ctc then all ports should have the transmitClockSource as localTiming different-LoopbackConfig-on-Ports(24) all physical ports included in the portMap must have the same loopback configuration imaGChanNeTxClkMode-unsupported(25) ima group channel near-end Tx clock mode is not supported intfChange-Disallowed-on-APS-ProtectionPort(26) an interface cannot be manipulated via protection port in an APS setup intferfaceCurrentlyNotSupported(27) the interface type is not support currently failure-at-call-handler(28) interface creation failure due to call handler unstructuredCE-payloadloop(29) Unstructured CE should not have payload loopback as a loop back option channelConfigModeNotConforming(30) There was a limitation on the channel mode of DSP_2D card: if there is a channel is already inService, all the channel mode of configured channels must be the same as that of the channel inService; all the channel mode of unconfigured channels can only be configured the same as that of the channel inService. usageOfReservedTimeSlot(31) for HD_E1, do not allow any configuration to be SET on channel number 1 or 17 (base 1) or chan 0 or 16 (base 0). virtualIntf-and-AtmSignaling-bothCannotBeEnabled(32) vitual interface and signalling cannot both be enabled at the same time virtualUni-and-AtmSignaling-bothCannotBeEnabled(33) vitual UNI and signalling cannot both be enabled at the same time virtualUni-notSupported(34) virtual UNI is not supported atmUni-UbrLoadBalSupp-cannotBeEnabled-whenSignalingDisabled(35) ubr load balancing cannot be enabled when signaling is disabled virtualInterface-notSupported(36) virtual interface support only allowed on APS type of cards card-doesNotSupport-UPC(37) only some cardTypes support UPC atmUni-SvcVpiVci-RangeCheck-Failure(38) Do range check provided atmSignaling is enabled vciMinSvc <= vciMaxSvc and vpiMinSvc <= vpiMaxSvc atmUni-SigVpiVci-Within-Svc-Range(39) atmUni{Vpi,Vci}Sig should not be within svc range atmUni-Ilmi-Svc-Sig-VpiVci-Clash(40) if IlmiProtocol status and atmUniSignaling are both enabled then the Ilmi Vpi/Vci should not fall in the Svc range and should not be equal to signaling vpi/vci virtualUNI-VpiNotAvailable(41) vpi is not available for the virtual UNI virtualUNI-InvalidVUNIId(42) vitural UNI Index is invalid intfNotSupported-with-ds1LineType-d4(43) if dsx1LineType is DSX1_D4 channel, interface type can't be atmIma intfNotSupported-with-ds1LineCoding-ami(44) if dsx1LineCoding is DSX1_AMI channel interface type can't be atmIma onlyCEsupported-with-msBitStuffing-enabled(45) if msBitStuffing is enabled only interface type circuit emulation is supported vISuppConnTrafficShapingMutuallyExclusive(46) The VI support flag and Traffic Shaping flag are mutually exclusive tS16onPortNotCAS(47) must have cas on port for channel to have cas trunk line interface channelizationDisabled(48) should have channelization enabled to have cas trunk line primaryDS1InterfaceNotConfigured(49) primary DS1 interface is not configured primaryTMCChanNotConfigured(50) primary timeslot management channel is not configured primaryTMCIntfAlreadyConfiguredInAnotherIg(51) primary timeslot management channel interface is already configured in another interface group primaryTMCIntfCantBeChanged(52) primary timeslot management channel interfance can't be changed primaryEOCChanNotConfigured(53) primary embeded operation channel is not configured primaryEOCIntfAlreadyConfiguredInAnotherIg(54) primary embeded operation channel interface is already configured in another interface group primaryTMC-EOCIntfShouldBeSame(55) primary timeslot management channel and embeded operation channel interfaces should be the same primaryEOCIntfCantBeChanged(56) primary embeded operation channel inteface can't be changed primaryTMC-BackupTMCIntfCantBeSame(57) primary and backup timeslot management channel interfaces can't be the same backupDS1InterfaceNotConfigured(58) backup DS1 interface is not configured backupTMCChanNotConfigured(59) backup timeslot management channel is not configured backupTMCIntfAlreadyConfiguredInAnotherIg(60) backup timeslot management channel interface is already configured in another interface group backupTMCIntfCantBeChanged(61) backup timeslot management channel interfance can't be changed primaryEOC-BackupEOCIntfCantBeSame(62) primary and backup embeded operation channel interfaces can't be the same backupEOCChanNotConfigured(63) backup embeded operation channel is not configured backupEOCIntfAlreadyConfiguredInAnotherIg(64) backup embeded operation channel interface is already configured in another interface group backupTMC-EOCIntfShouldBeSame(65) backup timeslot management channel and embeded operation channel interfaces should be the same backupEOCIntfCantBeChanged(66) backup embeded operation channel inteface can't be changed newBWBelowCurrentAllocated(67) new bandwidth is below the current allocated bandwidth newBWBelowCurrentAllocated-SvcsBeingDeleted(68) new bandwidth is below the current allocated bandwidth svc is being deleted newBWBelowCurrentAllocated-DeletePvcs(69) new bandwidth is below the current allocated bandwidth delete pvc newBWAboveCurrentAllocated(70) new bandwidth is above the current allocated bandwidth primaryInactive-or-SecondaryActive-In-IntfProtTable(71) an interface can't be deleted if it is in interface protection group which is primary/inactive or secondry/active onlyCEsupported-with-msLOSDetection-enabled(72) if msLOSDetection is enabled, only interface type circuit emulation is supported nonMuxNotAllowed-with-FaxRelay(73) DSP2 cards: if channelMode is CFG_DSP2_FAX_RELAY, aalMode can't be D_dsp2AalMode_aal2_non_multiplexed, invalid-DSPmode-and-AALmode-combination(74) DSP2 cards: such DSP mode and AAL mode combination is not allowed noBandwidth-For-SignalingConns(75) no bandwidth for signal connections | |||
| OBJECT-TYPE | |||
| INTEGER | interfaceInService(1), interfaceNotNew(2), interfaceExists(3), bridgeGroupActive(4), signalingNotEnabled(5), firmwareOutOfDate(6), t1SigEnableInterfaceNotSupported(7), ts16ForData(8), dbcesConfigured(9), signalingEnabled(10), channelizationEnabled(15), unstructuredCEConfigured(16), firmwareOutOfDate-ts16CAS-unsupported(17), firmwareOutOfDate-interfaceType-unsupported(18), firmwareOutOfDate-ts16-unsupported(19), invalidPortMap(20), otherInterfacesExistOnThisPort(21), intfInIMAgroup(22), errorCTC-portTxClkSrc-notLocal(23), different-LoopbackConfig-on-Ports(24), imaGChanNeTxClkMode-unsupported(25), intfChange-Disallowed-on-APS-ProtectionPort(26), intferfaceCurrentlyNotSupported(27), failure-at-call-handler(28), unstructuredCE-payloadloop(29), channelConfigModeNotConforming(30), usageOfReservedTimeSlot(31), virtualIntf-and-AtmSignaling-bothCannotBeEnabled(32), virtualUni-and-AtmSignaling-bothCannotBeEnabled(33), virtualUni-notSupported(34), atmUni-UbrLoadBalSupp-cannotBeEnabled-whenSignalingDisabled(35), virtualInterface-notSupported(36), card-doesNotSupport-UPC(37), atmUni-SvcVpiVci-RangeCheck-Failure(38), atmUni-SigVpiVci-Within-Svc-Range(39), atmUni-Ilmi-Svc-Sig-VpiVci-Clash(40), virtualUNI-VpiNotAvailable(41), virtualUNI-InvalidVUNIId(42), intfNotSupported-with-ds1LineType-d4(43), intfNotSupported-with-ds1LineCoding-ami(44), onlyCEsupported-with-msBitStuffing-enabled(45), vISuppConnTrafficShapingMutuallyExclusive(46), tS16onPortNotCAS(47), channelizationDisabled(48), primaryDS1InterfaceNotConfigured(49), primaryTMCChanNotConfigured(50), primaryTMCIntfAlreadyConfiguredInAnotherIg(51), primaryTMCIntfCantBeChanged(52), primaryEOCChanNotConfigured(53), primaryEOCIntfAlreadyConfiguredInAnotherIg(54), primaryTMC-EOCIntfShouldBeSame(55), primaryEOCIntfCantBeChanged(56), primaryTMC-BackupTMCIntfCantBeSame(57), backupDS1InterfaceNotConfigured(58), backupTMCChanNotConfigured(59), backupTMCIntfAlreadyConfiguredInAnotherIg(60), backupTMCIntfCantBeChanged(61), primaryEOC-BackupEOCIntfCantBeSame(62), backupEOCChanNotConfigured(63), backupEOCIntfAlreadyConfiguredInAnotherIg(64), backupTMC-EOCIntfShouldBeSame(65), backupEOCIntfCantBeChanged(66), newBWBelowCurrentAllocated(67), newBWBelowCurrentAllocated-SvcsBeingDeleted(68), newBWBelowCurrentAllocated-DeletePvcs(69), newBWAboveCurrentAllocated(70), primaryInactive-or-SecondaryActive-In-IntfProtTable(71), onlyCEsupported-with-msLOSDetection-enabled(72), nonMuxNotAllowed-with-FaxRelay(73), invalid-DSPmode-and-AALmode-combination(74), noBandwidth-For-SignalingConns(75) | ||
| powerSupplyReasonCode | 1.3.6.1.4.1.1751.2.18.15.5 | ||
| Identification for change in status of a power supply. overload(1) overload overloadCleared(2) overload cleared plus5vFailed(3) +5V power supply failed plus5vCleared(4) +5V power supply cleared plus120vFailed(5) +120V power supply failed plus120vCleared(6) +120V power supply cleared minus48vFailed(7) -48V power supply failed minus48vCleared(8) -48V power supply failed | |||
| OBJECT-TYPE | |||
| INTEGER | overload(1), overloadCleared(2), plus5vFailed(3), plus5vCleared(4), plus120vFailed(5), plus120vCleared(6), minus48vFailed(7), minus48vCleared(8) | ||
| portId | 1.3.6.1.4.1.1751.2.18.15.6 | ||
| Port ID used for identification in traps. Number value is interpreted as a port of the form, SSPP, where SS is the card slot and PP is the port number. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| lineStatus | 1.3.6.1.4.1.1751.2.18.15.7 | ||
| Bit map of the status of a line connected to a port. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| firmwareDownloadReasonCode | 1.3.6.1.4.1.1751.2.18.15.8 | ||
| The suspected reasons of why a firmware download would fail. | |||
| OBJECT-TYPE | |||
| INTEGER | cardInService(1), errorInFile(2), otherFailure(3), wrongCardSubType(4), driverUnavailable(5), driverInvalidHeaderChecksum(6), driverInvalidRecordChecksum(7), requestReplyTimeout(8), completeReplyTimeout(9), mapFileCorrupted(10), mapFileUnavailable(11), mapFileInvalidChecksum(12), mapFileNameImproper(13), cfgFileCorrupted(14), cfgFileUnavailable(15), cfgFileInvalidChecksum(16), wrongCardType(17), removeCardBeforeFinish(18), ioUnsupported(19) | ||
| remoteRebootReasonCode | 1.3.6.1.4.1.1751.2.18.15.9 | ||
| The result of a remote reboot request. | |||
| OBJECT-TYPE | |||
| INTEGER | ioCard1Reboot-OK(1), ioCard2Reboot-OK(2), ioCard3Reboot-OK(3), ioCard4Reboot-OK(4), ioCard5Reboot-OK(5), ioCard6Reboot-OK(6), ioCard7Reboot-OK(7), ioCard8Reboot-OK(8), ioCard9Reboot-OK(9), ioCard10Reboot-OK(10), ioCard11Reboot-OK(11), ioCard12Reboot-OK(12), ioCard13Reboot-OK(13), ioCard14Reboot-OK(14), ioCard15Reboot-OK(15), ioCard16Reboot-OK(16), ioCard1Reboot-NoCardInSlot(17), ioCard2Reboot-NoCardInSlot(18), ioCard3Reboot-NoCardInSlot(19), ioCard4Reboot-NoCardInSlot(20), ioCard5Reboot-NoCardInSlot(21), ioCard6Reboot-NoCardInSlot(22), ioCard7Reboot-NoCardInSlot(23), ioCard8Reboot-NoCardInSlot(24), ioCard9Reboot-NoCardInSlot(25), ioCard10Reboot-NoCardInSlot(26), ioCard11Reboot-NoCardInSlot(27), ioCard12Reboot-NoCardInSlot(28), ioCard13Reboot-NoCardInSlot(29), ioCard14Reboot-NoCardInSlot(30), ioCard15Reboot-NoCardInSlot(31), ioCard16Reboot-NoCardInSlot(32), allIOCardReboot-OK(33), allIOCardReboot-NoIOCards(34), chassisReboot-Proceeding(35), backupCpuReboot-Proceeding(36), backupCpuReboot-NoBackup(37), primaryCpuReboot-Proceeding(38), primaryCpuSwitchover-Proceeding(39), primaryCpuSwitchover-NoBackup(40), chassisReboot-Fail-VersionControlInProgress(41), backupCpuReboot-Fail-VersionControlInProgress(42), primaryCpuReboot-Fail-VersionControlInProgress(43), primaryCpuSwitchover-Fail-VersionControlInProgress(44), primaryCpuSwitchover-Fail-BkCPUDataBaseNotNew(45), primaryCpuSwitchover-Fail-BkCPUBuildNotGood(46), primaryCpuSwitchover-Fail-BkCPU-NotReady(47) | ||
| saveConfigurationReasonCode | 1.3.6.1.4.1.1751.2.18.15.10 | ||
| The result of a save configuration request. equipment-OK(1) - Save of equipment configuration completed. equipment-Fail-VersionControlInProgress(2) - Save of equipment configuration failed due to ongoing version control operation. equipment-Fail(3) - Save of equipment configuration failed. connections-OK(4) - Save of connection configuration completed. connections-Fail-VersionControlInProgress(5) - - Save of connection configuration failed due to ongoing version control operation. connections-Fail(6) - Save of connection configuration failed. routing-OK(7) - Save of routing configuration completed. routing-Fail-VersionControlInProgress(8) - - Save of routing configuration failed due to ongoing version control operation. routing-Fail(9) - Save of routing configuration failed. all-OK(10) - Saving of all configurations completed. all-Fail-VersionControlInProgress(11) - - Saving of all configurations failed due to ongoing version control operation. all-Fail(12) - Saving of all configurations failed. fileTransferFailed(13) - Saving of configurations to secondary CPU failed. fileTransferCompleted(14) - Saving of configurations to secondary CPU completed. unSupportedOption(15) - Unsupported save option received. fail-backupCpuInitializationInProgress(16) - - Save operation failed due to ongoing secondary cpu initialization. expect2ndCPURebootAfterSave(17) - - Notification to expect reboot of secondary CPU after a save operation. expect2ndCPUCardFailedOrRemoved(18) - Notification to expect trap indicating removal/failure of secondary CPU after a save operation. | |||
| OBJECT-TYPE | |||
| INTEGER | equipment-OK(1), equipment-Fail-VersionControlInProgress(2), equipment-Fail(3), connections-OK(4), connections-Fail-VersionControlInProgress(5), connections-Fail(6), routing-OK(7), routing-Fail-VersionControlInProgress(8), routing-Fail(9), all-OK(10), all-Fail-VersionControlInProgress(11), all-Fail(12), fileTransferFailed(13), fileTransferCompleted(14), unSupportedOption(15), fail-backupCpuInitializationInProgress(16), expect2ndCPURebootAfterSave(17), expect2ndCPUCardFailedOrRemoved(18) | ||
| versionConfigurationReasonCode | 1.3.6.1.4.1.1751.2.18.15.11 | ||
| Indicated status and results of version changing. upgrade-Start(1) upgrade starts upgrade-Completed(2) upgrade completed upgrade-Fail(3) upgrade failed downgrade-Start(4) downgrade starts downgrade-Completed(5) downgrade completed downgrade-Fail(6) downgrade failed upgrade-Fail-NoVersion(7) upgrade failed, no version upgrade-Fail-VersionControlInProgress(8) upgrade failed, version control is in progress downgrade-Fail-NoVersion(9) downgrade failed, no version downgrade-Fail-VersionControlInProgress(10) downgrade failed, version control is in progress upgrade-InProgress(11) upgrade is in progress downgrade-InProgress(12)downgrade is in progress upgrade-sanityCheck-InProgress(13) upgrade sanity check is in progress downgrade-sanityCheck-InProgress(14) downgrade sanity check is in progress upgrade-sanityCheck-Completed(15), upgrade sanity check is completed downgrade-sanityCheck-Completed(16), downgrade sanity check is completed upgrade-Fail-SanityCheckFail(17) upgrade failed due to sanity check failure downgrade-Fail-SanityCheckFail(18) downgrade failed due to sanity check failure upgrade-Fail-BkCPUFailedToRespond(19) upgrade failed since backup CPU failed to respond downgrade-Fail-BkCPUFailedToRespond(20) downgrade failed since backup CPU failed to respond upgrade-Fail-UserAbort(21) upgrade failed since user aborted downgrade-Fail-UserAbort(22) downgrade failed since user aborted synch-Start(23) synchronization starts synch-InProgress(24) synchronization is in progress synch-Completed(25) synchronization is completed synch-Fail(26) synchronization failed synch-Fail-NoBkCPU(27) synchronization failed since no backup CPU synch-Fail-SameVersion(28) synchronization failed due to the same version synch-Fail-FileCRCFailed(29) synchronization failed due to file CRC failure synch-Fail-VersionControlInProgress(30) synchronization failed since version control is in progress synch-Fail-UserAbort(31) synchronization failed since user aborted synch-Fail-SanityCheckFail(32) synchronization failed due to sanity check failure synch-Fail-BkCPUFailedToRespond(33) synchronization failed since backup CPU failed to respond synch-sanityCheck-InProgress(34) synchronization sanity check is in progress synch-sanityCheck-Completed(35) synchronization sanity check is completed failedToAbort(36) failed to abort | |||
| OBJECT-TYPE | |||
| INTEGER | upgrade-Start(1), upgrade-Completed(2), upgrade-Fail(3), downgrade-Start(4), downgrade-Completed(5), downgrade-Fail(6), upgrade-Fail-NoVersion(7), upgrade-Fail-VersionControlInProgress(8), downgrade-Fail-NoVersion(9), downgrade-Fail-VersionControlInProgress(10), upgrade-InProgress(11), downgrade-InProgress(12), upgrade-sanityCheck-InProgress(13), downgrade-sanityCheck-InProgress(14), upgrade-sanityCheck-Completed(15), downgrade-sanityCheck-Completed(16), upgrade-Fail-SanityCheckFail(17), downgrade-Fail-SanityCheckFail(18), upgrade-Fail-BkCPUFailedToRespond(19), downgrade-Fail-BkCPUFailedToRespond(20), upgrade-Fail-UserAbort(21), downgrade-Fail-UserAbort(22), synch-Start(23), synch-InProgress(24), synch-Completed(25), synch-Fail(26), synch-Fail-NoBkCPU(27), synch-Fail-SameVersion(28), synch-Fail-FileCRCFailed(29), synch-Fail-VersionControlInProgress(30), synch-Fail-UserAbort(31), synch-Fail-SanityCheckFail(32), synch-Fail-BkCPUFailedToRespond(33), synch-sanityCheck-InProgress(34), synch-sanityCheck-Completed(35), failedToAbort(36) | ||
| percentComplete | 1.3.6.1.4.1.1751.2.18.15.12 | ||
| Used for trap fileTransferStatusNotify and value equals the percent of the upgrade, downgrade, or ftp download completed. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipTypeReasonCode | 1.3.6.1.4.1.1751.2.18.15.13 | ||
| Indicator of which ip address had the problem. | |||
| OBJECT-TYPE | |||
| INTEGER | siteEtherIpAddr(1), siteEtherIpMask(2), siteGatewayAddr(3), siteRemoteMgrAddr1(4), siteRemoteMgrAddr2(5), siteRemoteMgrAddr3(6), siteRemoteMgrAddr4(7), siteRemoteMgrAddr5(8), inBandPrimaryIpAddress(9), inBandPrimaryIpMask(10), inBandBackupIpAddress(11), inBandBackupIpMask(12), siteIncorrectGatewaySubnet(13), siteGatewayInbandAddrMatch(14), siteIncorrectInbandSubnet(15), siteIncorrectEthernetSubnet(16), cpuIpSameAsSwitchIpAddr(17), cpuIpAddrInvalid(18), cpuAndIpMaskInvalid(19), switchAndCpuIpSubnetMismatch(20), switchIpAddrInvalid(21), switchAndIpMaskInvalid(22), cpuIpMaskClashWithInbandSubnet(23), switchIpMaskClashWithInbandSubnet(24), siteGatewayAddrInvalid(25), siteGatewayInbandAddrClash(26), unableToApplyGatewayIpAddr(27), unableToSetCpuIpInEPROM(28), unableToApplyCpuIpAddr(29), unableToApplySwitchIpAddr(30), unableToRevertBackToCpuIpAddr(31), gatewayAndCpuIpSubnetMismatch(32) | ||
| timingReasonCode | 1.3.6.1.4.1.1751.2.18.15.14 | ||
| Indicator of type of relationship violated. | |||
| OBJECT-TYPE | |||
| INTEGER | invalidForwardDelay-MaxAge(1), invalidHelloTime-MaxAge(2) | ||
| alarmCardReasonCode | 1.3.6.1.4.1.1751.2.18.15.15 | ||
| Configuration status of the alarm inputs and outputs. cutoff - alarm turned off. There are two ways to turn off the audible alarm, locally via the pushbutton switch on the alarm module, and remotely, via the remote alarm cutoff, one of the alarm card inputs. | |||
| OBJECT-TYPE | |||
| INTEGER | inputContactClosed(1), inputContactOpen(2), outputActivated(3), outputDactivated(4), audibleLocalAlarmEnable(5), audibleLocalAlarmCutoff(6), audibleRemoteAlarmEnable(7), audibleRemoteAlarmCutoff(8) | ||
| removeConfigFiles | 1.3.6.1.4.1.1751.2.18.15.16 | ||
| Used to indicate the status of a remove configuration files request. from-PrimaryCPU(1) configuration files are removed from primary CPU from-BackupCPU(2) configuration files are removed from backup CPU chassisReboot(3) chassis reboot being done after removing configuration files failed-VersionControlInProgress(4) configuration file removal failed due to ongoing version conflict | |||
| OBJECT-TYPE | |||
| INTEGER | from-PrimaryCPU(1), from-BackupCPU(2), chassisReboot(3), failed-VersionControlInProgress(4) | ||
| spvcConfigFailureCode | 1.3.6.1.4.1.1751.2.18.15.17 | ||
| An identified reason for failure while configuring/modifying SPVC parameters. noSpvcConfigured(1) : There endpoint has not been configured as SPVC, so SPVC parameters cannot be modified. spvcAlreadyConfigured(2) : SPVC is already configured so it cannot be configured again as SPVC endpoint. noInterfaceConfigured(3) : There is no interface configured on the particular SSPPCCC. interfaceNotConfiguredAsRequired(4) : While configuring an SPVC endpoint, the interface is not as desired (e.g.it is not CE, while trying to configure CES SPVC). notActiveSpvc(6) : If the endpoint is configured with flowType ptToMptA2B the connType has to be activeSvc. slotA-OutofRange(7) : A-side of SPVC connection has slot number out of range. portA-OutofRange(8): A-side of SPVC connection has port number out of range. channelA-OutofRange(9): A-side of SPVC connection has channel number out of range. vpiVciWithInSvcRange(10) : A-side side of SPVC connection has vpi/vci configured in the SVC range of the A-side ATM interface. retryIntervalExceedsTheLimit(11) : retryInterval exceeds 3600s. interfaceNotConfiguredAsCE(12) : SPVC endpoint is configured as something other than CE. interfaceNotConfiguredAsVbr(13) : SPVC endpoint is configured as something other than TE. interfaceNotConfiguredAsAtm(14) : SPVC endpoint is configured as something other than ATM. noAddressConfiguredOnTheInterface(15) : Local address not configured for the particular SPVC being configured. localAddressNotValid(16) : invalid NSAP address format vpiVciUnavailable(17) : SPVC already setup on particular vpi/vci. pvcAlreadySetupOnVpiVci(18) : vpi/vci being used by another pvc. pvcAlreadySetupOnInterface(19) : redundant, same as above. interfaceNotConfiguredAsFr(21) : SPVC endpoint is configured as something other than Fr dlciUnavailable(22) : dlci not available at Passive endpoint. pvcAlreadySetupOnDlci(23) : dlci being used by another pvc. frTrafficParamsUnsupp(24) : fr-atm traffic mapping failure. dsp2ParamsUnsupp(25) : dsp2 params not supported for the call. sarNotConfigReq(26) : sarType not configured as required. | |||
| OBJECT-TYPE | |||
| INTEGER | noSpvcConfigured(1), spvcAlreadyConfigured(2), noInterfaceConfigured(3), interfaceNotConfiguredAsRequired(4), notActiveSpvc(6), slotA-OutofRange(7), portA-OutofRange(8), channelA-OutofRange(9), vpiVciWithInSvcRange(10), retryIntervalExceedsTheLimit(11), interfaceNotConfiguredAsCE(12), interfaceNotConfiguredAsVbr(13), interfaceNotConfiguredAsAtm(14), noAddressConfiguredOnTheInterface(15), localAddressNotValid(16), vpiVciUnavailable(17), pvcAlreadySetupOnVpiVci(18), pvcAlreadySetupOnInterface(19), retryIntervalTooSmall(20), interfaceNotConfiguredAsFr(21), dlciUnavailable(22), pvcAlreadySetupOnDlci(23), frTrafficParamsUnsupp(24), dsp2ParamsUnsupp(25), sarNotConfigReq(26), vuniNotMatch(27) | ||
| imaGrpChannelStatus | 1.3.6.1.4.1.1751.2.18.15.18 | ||
| The return value for the imaGrpChannelFailNotify trap. startupFe(1) Far-end is in the state of start-up cfgAbort(2) this state is entered when the far-end tries to use unacceptable configuration parameters including invalid frame length and incompatable symmetry cfgAbortFe(3) Far-end reported unacceptable configuration parameters including invalid frame length and incompatable symmetry insuffLinks(4) Near-end reported less than the min number of Tx links are active or less than the min number of Rx links are active insuffLinksFe(5) Far-end reported less than the min number of Rx links are active or less than thenmin number of Tx links are active blockedNe(6) Near-end is administratively out-of-service blockedFe(7) Far-end is administratively out-of-service timingSynch(8) A possible configuration mismatch has occurred (CTC and CTC modes are not the same at both ends of the IMA virtual links. | |||
| OBJECT-TYPE | |||
| INTEGER | startupFe(1), cfgAbort(2), cfgAbortFe(3), insuffLinks(4), insuffLinksFe(5), blockedNe(6), blockedFe(7), timingSynch(8) | ||
| atmImaIntfStatus | 1.3.6.1.4.1.1751.2.18.15.19 | ||
| The return value for the atmImaIntfFailNotify trap. lif -- Persistence of LIF defect at near-end (Loss of IMA Frame) lods -- Persistence of LODS defect at near-end (Link Out of Delay Synchronization) txMisConnect -- The link is mis-connected (not connected to the same far-end as the other links in the group.) rfi -- Persistence of RDI-IMA defect at near-end (Remote Failure Indicator) fault -- Implementation specific fault at near-end txUnusableFe -- Tx link forced to unusable due to far-end behavior rxUnusableFe -- Rx link forced to unusable due to far-end behavior | |||
| OBJECT-TYPE | |||
| INTEGER | lif(1), lods(2), txMisConnect(3), rfi(4), fault(5), txUnusableFe(6), rxUnusableFe(7) | ||
| deviceId | 1.3.6.1.4.1.1751.2.18.15.20 | ||
| device ID is used as the number of external devices. Each device can be an external input device or control output device. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oamTestFailureReasonCode | 1.3.6.1.4.1.1751.2.18.15.21 | ||
| An identified reason why an OAM Loopback Test request has failed. invalidSPCforOAM: There is no such slot/port/channel in this box. invalidIntfForOAM: There is no such interface that OAM enabled. invalidLocationLength: The length of the Loopback Lo cation ID id not valid. oamNotSupportedForThisConnection: This connection is not OAM enabled.so OAM loopback is invalid test. loopbackTestAlreadyRunning: OAM loopback is waiting for response,not expect for another test. loopbackTestNotRunning: Invalid Test Actio. oamLocalResourcesUnavailable: Memery Alloc Fail. | |||
| OBJECT-TYPE | |||
| INTEGER | invalidSPCforOAM(1), invalidIntfForOAM(2), invalidLocationLength(3), oamNotSupportedForThisConnection(4), loopbackTestAlreadyRunning(5), loopbackTestNotRunning(6), oamLocalResourcesUnavailable(7) | ||
| pnniCode | 1.3.6.1.4.1.1751.2.18.15.22 | ||
| An identified reason for Miscellaneous Reasons in PNNI Configuration pnniInvEndSysPortId(1) : Invalid EndSystem PortId. pnniNodeAdmStatNotUp(2) : Admin Status of Node is not up. pnniProtLnkStatDown(3) : Pnni Lnk status is down. pnniProtLnkStatUpNotAdv(4) : Pnni Lnk status up but not advertised. pnniProtLinkStatUpAdv(5) : Pnni Lnk status up and advertised. pnniIntfAdmStatUp(6) : Pnni Intf Admin Status up. pnniNodeNotCfg(7) : Pnni Node not configured in the switch. pnniRtAddrAddedByIlmi(8) : Pnni Route added succesfully from ILMI. pnniRtAddrDelByIlmi(9) : Pnni Route deleted succesfully from ILMI. pnniLvlMismatchInNodeId(10) : Level mismatch in Node Id. pnniLvlMismatchInPGId(11) : Level mismatch in Peer Group Id. pnniATMAddrInvInNodeId(12) : ATM Address entered in Node Id invalid. pnniATMAddrInvInPGId(13) : ATM Address entered in Peer Group Id invalid. pnniIntfAdmStatNotDel(14) : Pnni Intf Admin Status Not deleted. pnniNodeAdmStatUp(15) : Pnni Node Admin Status up. pnniNodeRowStatNotActive(16) : Pnni Node Row Status not active - cannot modify pnniNewRtAddrAdded(17) : New route added into pnni route address table. pnniRtAddrMod(18) : Route modified in pnni Address table. pnniAdvtNodeIdNotMine(19) : Advertised NodeId does not belong to this psax. pnniFeatureNotSupported(20) : pnni feature unsupported. | |||
| OBJECT-TYPE | |||
| INTEGER | pnniInvEndSysPortId(1), pnniNodeAdmStatNotUp(2), pnniProtLnkStatDown(3), pnniProtLnkStatUpNotAdv(4), pnniProtLinkStatUpAdv(5), pnniIntfAdmStatUp(6), pnniNodeNotCfg(7), pnniRtAddrAddedByIlmi(8), pnniRtAddrDelByIlmi(9), pnniLvlMismatchInNodeId(10), pnniLvlMismatchInPGId(11), pnniATMAddrInvInNodeId(12), pnniATMAddrInvInPGId(13), pnniIntfAdmStatNotDel(14), pnniNodeAdmStatUp(15), pnniNodeRowStatNotActive(16), pnniNewRtAddrAdded(17), pnniRtAddrMod(18), pnniAdvtNodeIdNotMine(19), pnniFeatureNotSupported(20) | ||
| swtchNodeIndx | 1.3.6.1.4.1.1751.2.18.15.23 | ||
| Switch Node Index for PNNI. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oc3APSPairPortIndex | 1.3.6.1.4.1.1751.2.18.15.24 | ||
| APS Pair Port index - SSPP | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oc3APSReasonCode | 1.3.6.1.4.1.1751.2.18.15.25 | ||
| Enumerated values of the outcome of previous apsPair UserCommand or alarms on the line local - near-end remote - far-end working - working port protect - protecting port DoNotRevert - after switching from working line to protection line, don't revert to working line even it returns to work ManualSw - switch over by user command SD - signal degradation SF - signal failure Forced - force switch over LockOut - don't allow switch over to a line | |||
| OBJECT-TYPE | |||
| INTEGER | localprotectDoNotRevert(1), localprotectManualSw(8), localprotectSD(10), localprotectSF(12), localprotectForced(14), localprotectLockOut(15), localworkingDoNotRevert(17), localworkingManualSw(24), localworkingSD(26), localworkingSF(28), localworkingForced(30), remoteprotectDoNotRevert(33), remoteprotectManualSw(40), remoteprotectSD(42), remoteprotectSF(44), remoteprotectForced(46), remoteprotectLockOut(47), noRequest(48), remoteworkingDoNotRevert(49), remoteworkingManualSw(56), remoteworkingSD(58), remoteworkingSF(60), remoteworkingForced(62) | ||
| oc3APSK1K2Rx | 1.3.6.1.4.1.1751.2.18.15.26 | ||
| Rx K1/K2 followed by hex value of K1, K2 | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(2) | ||
| oc3APSK1K2Tx | 1.3.6.1.4.1.1751.2.18.15.27 | ||
| Tx K1/K2 followed by hex value of K1, K2 | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(2) | ||
| oc3APSSelectorState | 1.3.6.1.4.1.1751.2.18.15.28 | ||
| Working port: active/standby Protection port: standby/active | |||
| OBJECT-TYPE | |||
| INTEGER | w-active-p-standby(1), w-standby-p-active(2) | ||
| oc3APSWorkingLineSignalStatus | 1.3.6.1.4.1.1751.2.18.15.29 | ||
| Line Status of the working port sent in a trap enumeration explanations are the same as those of oc3APSProtectionLineSignalStatus | |||
| OBJECT-TYPE | |||
| INTEGER | noAlarm(1), signalDegradation(2), signalFailure(4), lostCellDelineation(8), switchByteFailure(16), ais-l(32), ais-p(64), lop(128), lof(256), los(512), moduleFailure(1024) | ||
| oc3APSProtectionLineSignalStatus | 1.3.6.1.4.1.1751.2.18.15.30 | ||
| Line Status of the protection port sent in a trap. noAlarm(1) no alarm signalDegradation(2) signal bit error rate is higher than the specified threshold signalFailure(4) signal bit error rate is much higher than the specified threshold lostCellDelineation(8) unable to identify cell boundary switchByteFailure(16) switch bytes(k1,k2) of SONET header have invalid code ais-l(32) line header of SONET frame gives alarm indication signal ais-p(64) path header of SONET frame gives alarm indication signal lop(128) 1)a valid STS or VT pointer can't be obtained by using the pointer interpretation rules and the pointer word doesn't contain all-ones; 2)a number of consecutive with the NDF set to 1001 but not indicating concatenation is received lof(256) loss of frame los(512) loss of signal moduleFailure(1024) module failure | |||
| OBJECT-TYPE | |||
| INTEGER | noAlarm(1), signalDegradation(2), signalFailure(4), lostCellDelineation(8), switchByteFailure(16), ais-l(32), ais-p(64), lop(128), lof(256), los(512), moduleFailure(1024) | ||
| arpStatus | 1.3.6.1.4.1.1751.2.18.15.31 | ||
| Success: Arp Data is Available. Failure: Reply from RS Card timed-out. TryAgain: The request was not honoured as it came too soon (within a sec). Try again after 1 sec and we will return either Success or Noroutes. | |||
| OBJECT-TYPE | |||
| INTEGER | success(1), noArpEntries(2), tryAgain(3) | ||
| routingStatus | 1.3.6.1.4.1.1751.2.18.15.32 | ||
| Success: Routing Data is Available. Failure: Reply from RS Card timed-out. TryAgain: The request was not honoured as it came too soon (within a sec). Try again after 1 sec and we will return either Success or Noroutes. | |||
| OBJECT-TYPE | |||
| INTEGER | success(1), noRoutes(2), tryAgain(3) | ||
| vpnTrapStatus | 1.3.6.1.4.1.1751.2.18.15.33 | ||
| Return codes for route server VPN level operations. vpnAddOk(1) VPN Creation OK vpnInternalFailure(2) Memory Corruption Failure vpnTooMany(3) Exceeded Max # of VPNs vpnBadSlot(4) Impossible Slot Number vpnBadId(5) VPN ID Must Be Between 1-6 vpnBadState(6) VPN State Machine Confused vpnBadTimerVal(7) Bad Timer Value: State Machine vpnAlreadyExists(8) VPN Already Exists vpnCantLocate(9), Cannot Find Referenced VPN vpnDelInProgress(10) Deletion In Progress -Must Wait vpnLockedIdle(11) VPN Taken Out Of Service vpnGeneralFailure(12) Reference Prev.Trap For Reason vpnNotAllowed(13) Operation Not Allowed vpnShutting(14) Shutting Down VPN -Must Wait vpnDisabled(15) Some VPN SubSystem Not Working vpnModifyOk(16) Modify Operation OK | |||
| OBJECT-TYPE | |||
| INTEGER | vpnAddOk(1), vpnInternalFailure(2), vpnTooMany(3), vpnBadSlot(4), vpnBadId(5), vpnBadState(6), vpnBadTimerVal(7), vpnAlreadyExists(8), vpnCantLocate(9), vpnDelInProgress(10), vpnLockedIdle(11), vpnGeneralFailure(12), vpnNotAllowed(13), vpnShutting(14), vpnDisabled(15), vpnModifyOk(16) | ||
| ipIntfStatus | 1.3.6.1.4.1.1751.2.18.15.34 | ||
| Return codes for route server IP interface operations. intOK(1) Interface OK. intIntFailure(2) Memory Corruption intTooMany(3) Exceeded Max # Of Interfaces intBadSlot(4) Impossible Slot Number intBadId(5), Impossible Interface ID intBadState(6) State Machine Confused intBadTimer(7) Bad Timer Value: State Machine intExists(8) Interface Already Exists intCantFind(9) Unused intDelInProgress(10) Deleting: -Must Wait intLockedIdle(11) Interface Taken Out Of Service intBadNetMask(12) Illegal Network Mask intShutting(13) Shutting Down -Must Wait intDisabled(14) Some Subsystem Not Working intNotHostAddr(15) Host Address Is Missing intBadIpAddr(16) Illegal IP Address intBadRouterId(17) Illegal VPN/Router ID intBadIntfId(18) Illegal Interface ID intCantFindRouter(19) No Corresponding VPN intCantFindIntf(20) Interface Does Not Exist intCantOnSameSubnet(21) Interface Already On This Subnet intCantModIntfAddr(22) Cannot Change Interface Addr intCantModIntfMask(23) Cannot Change Interface Mask intCantModIntfRipVer(24) Cannot Change Rip Ver # | |||
| OBJECT-TYPE | |||
| INTEGER | intOK(1), intIntFailure(2), intTooMany(3), intBadSlot(4), intBadId(5), intBadState(6), intBadTimer(7), intExists(8), intCantFind(9), intDelInProgress(10), intLockedIdle(11), intBadNetMask(12), intShutting(13), intDisabled(14), intNotHostAddr(15), intBadIpAddr(16), intBadRouterId(17), intBadIntfId(18), intCantFindRouter(19), intCantFindIntf(20), intCantOnSameSubnet(21), intCantModIntfAddr(22), intCantModIntfMask(23), intCantModIntfRipVer(24) | ||
| subChanStatus | 1.3.6.1.4.1.1751.2.18.15.35 | ||
| Return codes for route server sub channel connections operations. scOK(1) SubChannel OK scIntFailure(2) Memory Corruption scTooMany(3) Too Many SubChannels scBadSlot(4) Impossible Slot Number scBadId(5) Bad VPN ID scBadState(6), State Machine Confusion scBadTimerVal(7) Bad Timer Value: State Machine scExists(8) SubChannel Already Exists scCantFind(9) Unused scDelInProgress(10) Deleting: -Must Wait scLockedIdle(12) SubChannel Taken Out Of Serv. scSameVc(13) Connection In Use Already scFailedSetup(14) Referene Previous Trap scShutting(15) Shutting Down: -Must Wait scDisabled(16) SubSystem Disabled. scSetupErr(17) scRemvErr(18) Error Removing SubChannel scBadPortNo(19) Bad Port Specified scBadImIpAddr(20) Bad InBand IP Address scBadRouterId(21) Bad VPN/Router ID scBadIntfId(22) Impossible Interface ID scBadChanId(23) Impossible Channel ID scCantFindRouter(24) Cannot Find VPN scCantFindIntf(25) Cannot Find Interface scCantFindChan(26) Cannot Find SubChannel | |||
| OBJECT-TYPE | |||
| INTEGER | scOK(1), scIntFailure(2), scTooMany(3), scBadSlot(4), scBadId(5), scBadState(6), scBadTimerVal(7), scExists(8), scCantFind(9), scDelInProgress(10), scLockedIdle(12), scSameVc(13), scFailedSetup(14), scShutting(15), scDisabled(16), scSetupErr(17), scRemvErr(18), scBadPortNo(19), scBadImIpAddr(20), scBadRouterId(21), scBadIntfId(22), scBadChanId(23), scCantFindRouter(24), scCantFindIntf(25), scCantFindChan(26) | ||
| routeSrvStatus | 1.3.6.1.4.1.1751.2.18.15.36 | ||
| Return codes for basic route server task operations not related to any specific VPN or IP/Connection operation. rsCardOK(1) Route Server OK rsModInitFail(2) Route Server Failed Module Init. rsIntfInitFail(3) Route Server Failed Intf. Init. rsPortInitFail(4) Route Server Failed Port Init rsRipUpdateIntOK(5) Rip Update Interval was updated ok for the route server card. rsRipUpdateIntFail(6) Rip Update Interval was not updated mostly because of some VPN's still in service. | |||
| OBJECT-TYPE | |||
| INTEGER | rsCardOK(1), rsModInitFail(2), rsIntfInitFail(3), rsPortInitFail(4), rsRipUpdateIntOK(5), rsRipUpdateIntFail(6) | ||
| apsFailureReasonCode | 1.3.6.1.4.1.1751.2.18.15.37 | ||
| Identification of cause for automatic protection switching failure. protectionCard-notPresent(1) protection card doesn't exist protectionCardType-notAPS(2) card type of protection card is not APS protectionCardType-incompatible(3) card types of protection card and working card are incompatible protectionCard-notInUnconfiguredState(4) protection card is already configured protectionCard-notUnprotected(5) protection card is not unprotected resource-access-failure(6) internal failure application incorrect-APSconfiguration(7) correct aps configuration: 1)oc3APSConfiguration of working port is working and oc3APSConfiguration of protection port is protection 2) oc3APSConfiguration of working and protection ports are unprotected protectionPort-Active(8) protection port must be inactive when breaking aps pair workingPort-localLoop-notAllowed(9) working port can't be configured as localLoop protectionPort-localLoop-notAllowed(10) protection port can't be configured as localLoop either | |||
| OBJECT-TYPE | |||
| INTEGER | protectionCard-notPresent(1), protectionCardType-notAPS(2), protectionCardType-incompatible(3), protectionCard-notInUnconfiguredState(4), protectionCard-notUnprotected(5), resource-access-failure(6), incorrect-APSconfiguration(7), protectionPort-Active(8), workingPort-localLoop-notAllowed(9), protectionPort-localLoop-notAllowed(10) | ||
| statRtStatus | 1.3.6.1.4.1.1751.2.18.15.38 | ||
| Return codes for route server static route condititions. statRtOk(1) Static Rt OK statRtIntFailure(2) Memory Corruption statRtMany(3) Too Many Static Routes statRtSlot(4) Impossible Slot ID statRtBadId(5) Bad VPN ID statRtBadState(6) State Machine Confusion statRtBadTimer(7) Bad Timer Value: State Machine statRtExists(8) Static Rt Already Exists statRtCantFind(9) Unused statRtDelInProgress(10) Deleting: -Must Wait statRtLockedIdle(11) Static Rt Taken Out Of Service statRtBadNetMask(12) Bad Network Mask statRtCorrelation(13) Internal Correlation Error statRtShutting(14) Shutting Down: -Must Wait statRtDisabled(15) SubSystem Failure statRtBadMetric(16) Illegal Metric Value statRtBadIPAddr(17) Bad Static Route IP Address intfRtExists(18) Static Route On Different Intf. statRtBadSlot(19) Impossible Slot ID statRtBadRouterId(20) Bad VPN/Router ID statRtBadRouteId(21) Illegal Static Route ID statRtBadRouteNetMask(22) Bad Stat Route Network Mask statRtBadRouteIpAddr(23) Bad Interface IP Address statRtBadGtwyIpAddr(24) Bad Gateway IP Address statRtBadDestIpAddr(25) Bad Destination IP Address statRtBadDestNetMask(26) Bad Destination IP Mask statRtCantFindRouter(27) Cannot Find VPN statRtCantFindRoute(28) Cannot Find Static Route | |||
| OBJECT-TYPE | |||
| INTEGER | statRtOk(1), statRtIntFailure(2), statRtMany(3), statRtSlot(4), statRtBadId(5), statRtBadState(6), statRtBadTimer(7), statRtExists(8), statRtCantFind(9), statRtDelInProgress(10), statRtLockedIdle(11), statRtBadNetMask(12), statRtCorrelation(13), statRtShutting(14), statRtDisabled(15), statRtBadMetric(16), statRtBadIPAddr(17), intfRtExists(18), statRtBadSlot(19), statRtBadRouterId(20), statRtBadRouteId(21), statRtBadRouteNetMask(22), statRtBadRouteIpAddr(23), statRtBadGtwyIpAddr(24), statRtBadDestIpAddr(25), statRtBadDestNetMask(26), statRtCantFindRouter(27), statRtCantFindRoute(28) | ||
| portFailureReasonCode | 1.3.6.1.4.1.1751.2.18.15.39 | ||
| Identification of cause for failure in changing the parameters of a port insufficientModuleBandwidth(1) insufficient module bandwidth localLoopNotAllowedWhenInAPS(2) local loop is not allowed when a port is in an automatic switching pair. msBitStuffingEnabledOnlyForCE(3) if msBitStuffing is enabled, only interface type circuit emulation is allowed invalidOption(4) invalid option hasInterfaceInService(5) interface is in-service unsupportedBaudRate(6) the baud rate is not supported msLOSDetectionNotEnabled(7) msLOSDetection is not enabled | |||
| OBJECT-TYPE | |||
| INTEGER | insufficientModuleBandwidth(1), localLoopNotAllowedWhenInAPS(2), msBitStuffingEnabledOnlyForCE(3), invalidOption(4), hasInterfaceInService(5), unsupportedBaudRate(6), msLOSDetectionNotEnabled(7) | ||
| dlciNumber | 1.3.6.1.4.1.1751.2.18.15.40 | ||
| The number of the dlci being used. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ipAddrNumber | 1.3.6.1.4.1.1751.2.18.15.41 | ||
| The IP address of the host/network to be echoed | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| pingStatusReasonCode | 1.3.6.1.4.1.1751.2.18.15.42 | ||
| The response value - Alive destination can be reached Not Alive destination can't be reached | |||
| OBJECT-TYPE | |||
| INTEGER | alive(1), not-Alive(2) | ||
| primarySoftwareVersion | 1.3.6.1.4.1.1751.2.18.15.43 | ||
| Software version running on primary cpu. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(20) | ||
| backupSoftwareVersion | 1.3.6.1.4.1.1751.2.18.15.44 | ||
| Software version running on backup cpu. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(20) | ||
| oamActDeactResultCode | 1.3.6.1.4.1.1751.2.18.15.45 | ||
| Various result codes for the operator's command for OAM Activation-Deactivation. eteCCActSuccTowardsFarEnd: eteCCActSuccTowardsNearEnd: eteCCActSuccTowardsBothEnd: eteCCDeactSuccTowardsFarEnd: eteCCDeactSuccTowardsNearEnd: eteCCDeactSuccTowardsBothEnd: ete CC Act/Deact-request send out to far/near/both end eteCCActDeniedTowardsFarEnd: eteCCActDeniedTowardsNearEnd: eteCCActDeniedTowardsBothEnd: eteCCDeactDeniedTowardsFarEnd: eteCCDeactDeniedTowardsNearEnd: eteCCDeactDeniedTowardsBothEnd: ete CC Act/Deact-request is denied. eteCCActFailedTowardsFarEnd: eteCCActFailedTowardsNearEnd: eteCCActFailedTowardsBothEnd: eteCCDeactFailedTowardsFarEnd: eteCCDeactFailedTowardsNearEnd: eteCCDeactFailedTowardsBothEnd: ete CC Act/Deact-request is failed sent out segCCActSuccTowardsFarEnd: segCCActSuccTowardsNearEnd: segCCActSuccTowardsBothEnd: segCCDeactSuccTowardsFarEnd: segCCDeactSuccTowardsNearEnd: segCCDeactSuccTowardsBothEnd: segment CC Act/Deact-request send out to far/near/both end. segCCActDeniedTowardsFarEnd: segCCActDeniedTowardsNearEnd: segCCActDeniedTowardsBothEnd: segment CC Act-request is denied. segCCActFailedTowardsFarEnd: segCCActFailedTowardsNearEnd: segCCActFailedTowardsBothEnd: ete CC Act-request is failed sent out. oamReqFunctionNotImplemented: The function user issued is not impemeted. oamActDeactPrevReqInProgress: this interface is in wait for response state. SendPMCell: a management cell has been sent out to IO card indicating PM cell need to be sent. eteReceiveBRErrMessage: a BR message has been forwarded to CPU indicating BR error. receiveFPMErrMessage: a FPM message has been forwarded to CPU indicating FPM error. | |||
| OBJECT-TYPE | |||
| INTEGER | eteCCActSuccTowardsFarEnd(1), eteCCActSuccTowardsNearEnd(2), eteCCActSuccTowardsBothEnd(3), eteCCActDeniedTowardsFarEnd(4), eteCCActDeniedTowardsNearEnd(5), eteCCActDeniedTowardsBothEnd(6), eteCCActFailedTowardsFarEnd(7), eteCCActFailedTowardsNearEnd(8), eteCCActFailedTowardsBothEnd(9), eteCCDeactSuccTowardsFarEnd(10), eteCCDeactSuccTowardsNearEnd(11), eteCCDeactSuccTowardsBothEnd(12), eteCCDeactDeniedTowardsFarEnd(13), eteCCDeactDeniedTowardsNearEnd(14), eteCCDeactDeniedTowardsBothEnd(15), eteCCDeactFailedTowardsFarEnd(16), eteCCDeactFailedTowardsNearEnd(17), eteCCDeactFailedTowardsBothEnd(18), segCCActSuccTowardsFarEnd(19), segCCActSuccTowardsNearEnd(20), segCCActSuccTowardsBothEnd(21), segCCActDeniedTowardsFarEnd(22), segCCActDeniedTowardsNearEnd(23), segCCActDeniedTowardsBothEnd(24), segCCActFailedTowardsFarEnd(25), segCCActFailedTowardsNearEnd(26), segCCActFailedTowardsBothEnd(27), segCCDeactSuccTowardsFarEnd(28), segCCDeactSuccTowardsNearEnd(29), segCCDeactSuccTowardsBothEnd(30), oamReqFunctionNotImplemented(31), oamReqFailLocRsrcUnavl(32), oamActDeactPrevReqInProgress(33), oamActDeactInvalidParams(34), oamActDeactInvalidIntf(35), oamNotSupportedForThisConnection(36), oamCCnotSupportedForThisConnection(37), oamPrevActDeactReqFailed(38), oamEteLossOfContinuitySet(39), oamEteLossOfContinuityCleared(40), oamSegLossOfContinuitySet(41), oamSegLossOfContinuityCleared(42), oamActDeactPMOnlySupportOC3(43), oamPMnotSupportedForThisConnection(44), oamPMBRnotSupportedForThisConnection(45), etePMActSuccTowardsFarEnd(46), etePMActSuccTowardsNearEnd(47), etePMActSuccTowardsBothEnd(48), etePMActDeniedTowardsFarEnd(49), etePMActDeniedTowardsNearEnd(50), etePMActDeniedTowardsBothEnd(51), etePMActFailedTowardsFarEnd(52), etePMActFailedTowardsNearEnd(53), etePMActFailedTowardsBothEnd(54), etePMDeactSuccTowardsFarEnd(55), etePMDeactSuccTowardsNearEnd(56), etePMDeactSuccTowardsBothEnd(57), etePMBRActSuccTowardsFarEnd(58), etePMBRActSuccTowardsNearEnd(59), etePMBRActSuccTowardsBothEnd(60), etePMBRActDeniedTowardsFarEnd(61), etePMBRActDeniedTowardsNearEnd(62), etePMBRActDeniedTowardsBothEnd(63), etePMBRActFailedTowardsFarEnd(64), etePMBRActFailedTowardsNearEnd(65), etePMBRActFailedTowardsBothEnd(66), etePMBRDeactSuccTowardsFarEnd(67), etePMBRDeactSuccTowardsNearEnd(68), etePMBRDeactSuccTowardsBothEnd(69), segPMActSuccTowardsFarEnd(70), segPMActSuccTowardsNearEnd(71), segPMActSuccTowardsBothEnd(72), segPMActDeniedTowardsFarEnd(73), segPMActDeniedTowardsNearEnd(74), segPMActDeniedTowardsBothEnd(75), segPMActFailedTowardsFarEnd(76), segPMActFailedTowardsNearEnd(77), segPMActFailedTowardsBothEnd(78), segPMDeactSuccTowardsFarEnd(79), segPMDeactSuccTowardsNearEnd(80), segPMDeactSuccTowardsBothEnd(81), segPMBRActSuccTowardsFarEnd(82), segPMBRActSuccTowardsNearEnd(83), segPMBRActSuccTowardsBothEnd(84), segPMBRActDeniedTowardsFarEnd(85), segPMBRActDeniedTowardsNearEnd(86), segPMBRActDeniedTowardsBothEnd(87), segPMBRActFailedTowardsFarEnd(88), segPMBRActFailedTowardsNearEnd(89), segPMBRActFailedTowardsBothEnd(90), segPMBRDeactSuccTowardsFarEnd(91), segPMBRDeactSuccTowardsNearEnd(92), segPMBRDeactSuccTowardsBothEnd(93), eteSendPMCell(94), eteReceiveBRErrMessage(95), receiveBRErrMessage(96), receiveFPMErrMessage(97), sendPMCell(98) | ||
| tasCmprsAnnceReasonCode | 1.3.6.1.4.1.1751.2.18.15.46 | ||
| The result of a compress announcement request. | |||
| OBJECT-TYPE | |||
| INTEGER | cmprs-success(1), cmprs-Fail-equipment-Fail(2), cmprs-Fail-connections-Fail(3), cmprs-Fail-resource-busy(4), cmprs-Fail-resource-unavail(5) | ||
| tasTstLineReasonCode | 1.3.6.1.4.1.1751.2.18.15.47 | ||
| The result of a test line request. | |||
| OBJECT-TYPE | |||
| INTEGER | tst-success(1), tst-Fail-equipment-Fail(2), tst-Fail-invalid-params(3), tst-Fail-resource-unavail(4), tst-Fail-resource-busy(5) | ||
| gr303PPSReasonCode | 1.3.6.1.4.1.1751.2.18.15.48 | ||
| These reason codes are the result of GR303 Path Protection Switching (PPS) command issued by user | |||
| OBJECT-TYPE | |||
| INTEGER | forced(1), normal(2), userCommandFailed-inhibited(3), userCommandFailed-PathOos(4), userCommandFailed-badPathId(5), userCommandFailed-maxRetry(6), userCommandFailed-inprogress(7), userCommandFailed-unknown(8) | ||
| gr303PPSSource | 1.3.6.1.4.1.1751.2.18.15.49 | ||
| Indicates the initiator of the PPS switching | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), byIdt(2), byUser(3), byLocalAgent(4), suspendedByIdt(5), suspendedByLocalAgent(6) | ||
| tasMemReasonCode | 1.3.6.1.4.1.1751.2.18.15.50 | ||
| The result of a memory init request. | |||
| OBJECT-TYPE | |||
| INTEGER | mem-init-success(1), mem-init-Fail(2) | ||
| tasTrapTstId | 1.3.6.1.4.1.1751.2.18.15.51 | ||
| Announcement ID for trap. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..100 | ||
| tasTrapAnnceId | 1.3.6.1.4.1.1751.2.18.15.52 | ||
| test id for trap. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..100 | ||
| atmVpi | 1.3.6.1.4.1.1751.2.18.15.53 | ||
| Vpi is used in identification of Traps | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmVci | 1.3.6.1.4.1.1751.2.18.15.54 | ||
| Vci is used in identification of Traps | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| iptResultCode | 1.3.6.1.4.1.1751.2.18.15.55 | ||
| Various result codes for the operator's command forsetting/deleting interface protection group. interfaceProtectioniptAlreadyExistInterface: Expect another interface to be protected. interfaceProtectioniptInvalidInterface:interface invalid interfaceProtectioniptInvalidParams: invalid Parameters interfaceProtectioniptTryToDeleteEmptyTable:Table is already empty,can not be deleted . interfaceProtectioniptInvalidConfiguation: interfaceProtectioniptSuccessfulSwichOver: interface is switched over to the secondry interface. interfaceProtectioniptSuccessfulSwichBack: interface is switched back from secondry interface. interfaceProtectioniptFailedSwichOver: interface is failed switched over to the secondry interface. interfaceProtectioniptFailedSwichBack: interface is failed switched back from secondry interface. | |||
| OBJECT-TYPE | |||
| INTEGER | interfaceProtectioniptAlreadyExistInterface(1), interfaceProtectioniptInvalidInterface(2), interfaceProtectioniptInvalidParams(3), interfaceProtectioniptTryToDeleteEmptyTable(4), interfaceProtectioniptInvalidConfiguation(5), interfaceProtectioniptSuccessfulSwichOver(6), interfaceProtectioniptSuccessfulSwichBack(7), interfaceProtectioniptFailedSwichOver(8), interfaceProtectioniptFailedSwichBack(9) | ||
| pgtResultCode | 1.3.6.1.4.1.1751.2.18.15.56 | ||
| Various result codes for the operator's command for interface protection . | |||
| OBJECT-TYPE | |||
| INTEGER | interfaceProtectionpgtAlreadyExistInterface(1), interfaceProtectionpgtInvalidInterface(2), interfaceProtectionpgtInvalidParams(3), interfaceProtectionpgtryToDeleteEmptyTable(4), interfaceProtectionpgtSuccessfulSwichOver(5), interfaceProtectionpgtSuccessfulSwichBack(6), interfaceProtectionpgtFailedSwichOver(7), interfaceProtectionpgtFailedSwichBack(8), interfaceProtectionpgtInvalidConfiguation(9) | ||
| tasmControlBlockAllocFailReasonCode | 1.3.6.1.4.1.1751.2.18.15.57 | ||
| The result of a tasm control block memory allocation request. | |||
| OBJECT-TYPE | |||
| INTEGER | res-alloc-success(1), res-alloc-Fail-announce-control-blocks-mem-unavail(2), res-alloc-Fail-digit-control-blocks-mem-unavail(3), res-alloc-Fail-line-test-control-blocks-mem-unavail(4) | ||
| tasmCacheMemAllocFailReasonCode | 1.3.6.1.4.1.1751.2.18.15.58 | ||
| The result of a tasm control block memory allocation request. | |||
| OBJECT-TYPE | |||
| INTEGER | res-alloc-success(1), res-alloc-Fail-announce-cache-mem-unavail(2) | ||
| atmTrunkingConfigFailureCode | 1.3.6.1.4.1.1751.2.18.15.59 | ||
| An identified reason for failure while configuring/modifying ATM Trunking parameters: localIWFAlreadyConfigured(1) : Local IWF has already been configured, the parameters can not be changed or apply again. localIWFAtmAddressError(2): the ATM Address for Local IWF is not valid or this address has been used by someone else. localIWFIdOutOfRange(3): the Identification of Local IWF is out of range. maxNumberRmtIWFOutOfRange(4): the maximum number of Remote IWF is out of range. rmtIWFAlreadyConfigured(5): this remote IWF has already been configured( with index atmTrunkingRmtIWFIdentifier). rmtIWFIdOutOfRange: the identifier for the remote IWF is out of range. rmtIWFAtmAddressError: the ATM Address for remote IWF is not valid or this address has been used by someone else. vccIdError: the VCC ID for the SigVcc or BrVcc is 0, or this VCC ID is out of range or it has been used by someone else. vccPvcParameterNotAcceptable: the parameters of PVC side, including slot, port, channel, vpi, vci, are not acceptable. vccTrafficParameterNotValid: the VCC traffic parameters are not acceptable, including FwPcr01, BwPcr01, FwScr01, BwScr01, FWMbs01, BwMbs01, BrVccServiceType, BrVccSarType. vccViVuniNotValid: the configuration of Egress Vi/VUNI is not acceptable. vccTrunkParameterNotValid: the parameters for the Trunk is not supported, including BrVccMaxAal2ChanId, BrVccCircuitModeDataSupp, BrVccFrameModeSupp, BrVccFaxModeSupp, CASPktXportSupp, BrVccDTMFPktXportSupp, BrVccMFR1PktXportSupp, BrVccMFR2PktXportSupp, BrVccPCMEncoding, BrVccMaxFrameLength, BrVccIdleChannSuprSupp, BrVccSilenceDetSupp, BrVccCompressionSpec,AudioProfileId, SigVccSignaling. vccTrunkFeatureParameterNotValid: PSAX proprietary feature parameters not supported including SigVccInactiveTimer, SigVccRetryTimer, SigVccRetryLimit, BrVccInactiveTimer, BrVccRetryTimer, BrVccRetryLimit, BrVccGr303Supp, BrVccOamStatus. localIwfNotConfigured(14) : Local IWF not Configured localIwfIdNotMatch(15): specified Local IWF not match localIwfStatus(16): this operation is not supported because of the status of Local IWF rmtIwfNotConfigured(17): Remote IWF Not Configured rmtIwfModeNotCompatible(18): the Mode of Remote IWF is not compatiable rmtIwfStatus(19): this operation is not support because of the Status of Remote IWF vccAlreadyConfigured(20): This VCC has been configured vccPvcCacReject(21): PVC Configuration rejected by Cac Reservation Function requiredFieldMissing(22): mandatory fields missing outOfResource(23): Atm Trunking Task or System out of resource for this configuration rowStatusError(24):Row Status Error with the SNMP command generalErrorUnspecified(25): all other unspecified failure cause. | |||
| OBJECT-TYPE | |||
| INTEGER | localIWFAlreadyConfigured(1), localIWFAtmAddressError(2), localIWFIdOutOfRange(3), maxNumberRmtIWFOutOfRange(4), rmtIWFAlreadyConfigured(5), rmtIWFIdOutOfRange(6), rmtIWFAtmAddressError(7), vccIdError(8), vccPvcParameterNotAcceptable(9), vccTrafficParameterNotValid(10), vccViVuniNotValid(11), vccTrunkParameterNotValid(12), vccTrunkFeatureParameterNotValid(13), localIwfNotConfigured(14), localIwfIdNotMatch(15), localIwfStatus(16), rmtIwfNotConfigured(17), rmtIwfModeNotCompatible(18), rmtIwfStatus(19), vccAlreadyConfigured(20), vccPvcCacReject(21), requiredFieldMissing(22), outOfResource(23), rowStatusError(24), generalErrorUnspecified(25) | ||
| sapphireIntfAddressFailReasonCode | 1.3.6.1.4.1.1751.2.18.15.60 | ||
| The result of assigning the Sapphire Interface address when PSAX is Sapphire client. address-ok(1), Address assignment succeeded fail-Ilegal-IP-address(2), Illegal IP address assigned address not matching fail-not-match-InBandManagement-Switch-CPU-IP-Address(3) In-Band Management IP or Switch IP or CPU IP address fail-Switch-or-CPU-IP-Address-unconfigured(4) Switch IP or CPU IP address unconfigured fail-InBandManagement-IP-Address-unconfigured(5) InBandManagement IP address unconfigured. | |||
| OBJECT-TYPE | |||
| INTEGER | address-assign-ok(1), fail-Ilegal-IP-address(2), fail-not-match-InBandManagement-Switch-Cpu-IP-Address(3), fail-Switch-or-Cpu-IP-Address-unconfigured(4), fail-InBandManagement-IP-Address-unconfigured(5) | ||
| chassisOverTempAlarmReasonCode | 1.3.6.1.4.1.1751.2.18.15.61 | ||
| Indicator of presence of chassis over temperature alarm. | |||
| OBJECT-TYPE | |||
| INTEGER | set(1), clear(2) | ||
| sysControl | 1.3.6.1.4.1.1751.2.18.16 | ||
| OBJECT IDENTIFIER | |||
| saveConfiguration | 1.3.6.1.4.1.1751.2.18.16.1 | ||
| save configuration | |||
| OBJECT-TYPE | |||
| INTEGER | equipment(1), connections(2), routing(3), all(4) | ||
| upgradeSoftware | 1.3.6.1.4.1.1751.2.18.16.2 | ||
| software load management | |||
| OBJECT-TYPE | |||
| INTEGER | upgrade(1), fallBack(2), forceUpgrade(3), forceFallBack(4), synchronize(5), abort(6), forceSynchronize(7), forceAbort(8) | ||
| purgePvcConnections | 1.3.6.1.4.1.1751.2.18.16.3 | ||
| purge PVC connections on indicated interface | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| purgeRoutingTable | 1.3.6.1.4.1.1751.2.18.16.4 | ||
| purge indicated routing table | |||
| OBJECT-TYPE | |||
| INTEGER | iispCbr(1), iispVbr(2) | ||
| resetPortStatistics | 1.3.6.1.4.1.1751.2.18.16.5 | ||
| Reset the statistics counters for the given port Id (SSPP) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| resetInterfaceStatistics | 1.3.6.1.4.1.1751.2.18.16.6 | ||
| Reset the interface counters for the given port Id (SSPPCCC) | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| resetAllStatistics | 1.3.6.1.4.1.1751.2.18.16.7 | ||
| Reset all port and interface statistics counters, accpets any integer value | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| upgradeIpAddress | 1.3.6.1.4.1.1751.2.18.16.8 | ||
| IP Address for upgrade ftp server. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| upgradeAccountName | 1.3.6.1.4.1.1751.2.18.16.9 | ||
| ftp account name for access to upgrade ftp server. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(20) | ||
| upgradeAccountPassword | 1.3.6.1.4.1.1751.2.18.16.10 | ||
| ftp account password for access to upgrade ftp server. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(20) | ||
| upgradeCdromFile | 1.3.6.1.4.1.1751.2.18.16.11 | ||
| cdrom file path on upgrade ftp server to upgrade image library. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(79) | ||
| upgradeLicenseKey | 1.3.6.1.4.1.1751.2.18.16.12 | ||
| software license key. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(30) | ||
| upgradeSwCopyStatus | 1.3.6.1.4.1.1751.2.18.16.13 | ||
| Current status of the ftp software upgrade download. Status of the software upgrade. noActivity is the initial start state from boot-up. working is set while ftp'ing the upgrade. The final state is one of doneSuccessfully, doneWithError, or aborted, all self-explanatory. It will stay in this state until re-boot or starting an upgrade. If the state is doneWithError then upgradeSwErrorStatus will be set to reflect the type of error. | |||
| OBJECT-TYPE | |||
| INTEGER | noActivity(1), working(2), doneSuccessfully(3), doneWithError(4), aborted(5) | ||
| upgradeSwErrorStatus | 1.3.6.1.4.1.1751.2.18.16.14 | ||
| The result of the finish of the ftp software upgrade download. Set to a value 3-22 if upgradeSwCopyStatus is doneWithError. Set to none if upgradeSwCopyStatus is doneSuccessfully. Set to userAbort if upgradeSwCopyStatus is aborted. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), userAbort(2), invalidIpAddress(3), invalidAccountName(4), invalidAccountPassword(5), invalidCdromFile(6), libraryCRCFail(7), unableToOpenLibraryFile(8), unableToLoadLibraryModule(9), unableToFindTaskSymbolName(10), failureInSpawningTask(11), failureInCreatingMsgQ(12), failureInCopyingDataFiles(13), failureToRemoveNextTree(14), unableToMakeNextTree(15), unableToOpenFile(16), unableToMakeFtpConnection(17), unableToWriteFile(18), unableToCompleteFtp(19), fileCRCFail(20), unableToWritePackageList(21), taskSuspendOrDead(22), unableToUpdateBackup(23), cpuAbort(24), failureToTakeSemaphore(25), failureToRemoveFallBackTree(26), unableToMakeFallBackTree(27) | ||
| systemSwCopy | 1.3.6.1.4.1.1751.2.18.16.15 | ||
| start copy system files according to the profile. When upgradeSwCopyStatus is working, the start request will be ignored. Abort will have effect only when upgradeSwCopystatus is working. | |||
| OBJECT-TYPE | |||
| INTEGER | start(1), abort(2) | ||
| fwReleaseTable | 1.3.6.1.4.1.1751.2.18.16.16 | ||
| Table of firmware inventory data | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| FwReleaseEntry | |||
| fwReleaseEntry | 1.3.6.1.4.1.1751.2.18.16.16.1 | ||
| Row definition for firmware inventory | |||
| OBJECT-TYPE | |||
| FwReleaseEntry | |||
| fwReleaseSlot | 1.3.6.1.4.1.1751.2.18.16.16.1.1 | ||
| Physical slot location. Valid range is a number between 1 and 16. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..16 | ||
| fwReleaseRunning | 1.3.6.1.4.1.1751.2.18.16.16.1.2 | ||
| the firmware release currently running in a physical slot (e.g., 01.03.C01). | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(15) | ||
| fwReleaseEpromVersion | 1.3.6.1.4.1.1751.2.18.16.16.1.3 | ||
| the version of the firmware located on the I/O card (e.g., 01.03.C01). | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(9) | ||
| fwReleaseCurrentVersion | 1.3.6.1.4.1.1751.2.18.16.16.1.4 | ||
| the version of the firmware located in /scsi/current/io on the CPU disk drive (e.g., 01.03.C01). | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(9) | ||
| fwReleaseNextVersion | 1.3.6.1.4.1.1751.2.18.16.16.1.5 | ||
| the version of the firmware located in /scsi/next/io on the CPU disk drive (e.g., 01.03.C01). | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(9) | ||
| fwReleaseUpdate | 1.3.6.1.4.1.1751.2.18.16.16.1.6 | ||
| Update the fwReleaseCurrentVersion and the fwReleaseNextVersion variables by remapping the firmware files from the CPU disk drive. | |||
| OBJECT-TYPE | |||
| INTEGER | activate(1) | ||
| fwReleaseUpgrade | 1.3.6.1.4.1.1751.2.18.16.16.1.7 | ||
| Update the fwReleaseCurrentVersion and the fwReleaseNextVersion variables by remapping the firmware files from the CPU disk drive. | |||
| OBJECT-TYPE | |||
| INTEGER | eprom(1), current(2), next(3) | ||
| resetBridgeDomainStatistics | 1.3.6.1.4.1.1751.2.18.16.17 | ||
| Resets bridge domain statistics. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| remoteRebootCommand | 1.3.6.1.4.1.1751.2.18.16.18 | ||
| type of reboot. | |||
| OBJECT-TYPE | |||
| INTEGER | ioCard1Reboot(1), ioCard2Reboot(2), ioCard3Reboot(3), ioCard4Reboot(4), ioCard5Reboot(5), ioCard6Reboot(6), ioCard7Reboot(7), ioCard8Reboot(8), ioCard9Reboot(9), ioCard10Reboot(10), ioCard11Reboot(11), ioCard12Reboot(12), ioCard13Reboot(13), ioCard14Reboot(14), ioCard15Reboot(15), ioCard16Reboot(16), allIOCardReboot(100), chassisReboot(101), backupCpuReboot(102), primaryCpuReboot(103), primaryCpuSwitchover(200) | ||
| resetFrLmiStatistics | 1.3.6.1.4.1.1751.2.18.16.19 | ||
| Reset the frame relay LMI statistics counters for the given port Id (SSPPCCC) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| removeConfigurationFiles | 1.3.6.1.4.1.1751.2.18.16.20 | ||
| Removes the user configuration/connection files from the hard disk on the cpu. | |||
| OBJECT-TYPE | |||
| INTEGER | all(1) | ||
| systemFilesDirtyBitStatus | 1.3.6.1.4.1.1751.2.18.16.21 | ||
| Bit mask for system files: 0: all are clean 1: console.def 2: ecd.def 4: ssid.def 8: cnctn.db 16: iisp.cbr 32: iisp.vbr 64: spvc.db 128: vipr.cfg 256: fwc.def 512: vi.db 1024: iproute.db 2048: atmvuni.db | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4096 | ||
| resetAtmIlmiStatistics | 1.3.6.1.4.1.1751.2.18.16.22 | ||
| Reset the ATM ILMI statistics counters for the given channel Id (SSPPCCC) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| resetImaGrpChannelStatistics | 1.3.6.1.4.1.1751.2.18.16.23 | ||
| Reset the IMA Group Statistics counters for the given port Id (SSPPCCC) | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| oc3APSResetStats | 1.3.6.1.4.1.1751.2.18.16.24 | ||
| Reset the oc3aps Group Statistics counters for the given port Id (SSPP) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| resetsonetSectionStatistics | 1.3.6.1.4.1.1751.2.18.16.25 | ||
| Reset the sonetSectionCurrent Statistics counters for the given port Id (SSPP) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| resetsonetLineStatistics | 1.3.6.1.4.1.1751.2.18.16.26 | ||
| Reset the sonetLineCurrent Statistics counters for the given port Id (SSPP) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| resetsonetVTPathStatistics | 1.3.6.1.4.1.1751.2.18.16.27 | ||
| Reset the sonetVTPathCurrent Statistics counters for the given port Id (SSPP) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprVpnReset | 1.3.6.1.4.1.1751.2.18.16.28 | ||
| Reset the VPN statistics for VPN specified by (SSVV) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| svcRetBackupStatus | 1.3.6.1.4.1.1751.2.18.16.29 | ||
| Indicates backup status wrt SVC retention | |||
| OBJECT-TYPE | |||
| INTEGER | no-sync(1), sync-in-progress(2), fully-sync(3) | ||
| resetsonetPathStatistics | 1.3.6.1.4.1.1751.2.18.16.30 | ||
| Reset the sonetPathCurrent Statistics counters for the given port Id (SSPP) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| ambientTemperature | 1.3.6.1.4.1.1751.2.18.16.31 | ||
| Ambient temperature in degree Celcius where the system is kept | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| remoteDbServerGroup | 1.3.6.1.4.1.1751.2.18.16.32 | ||
| OBJECT IDENTIFIER | |||
| remoteDbServerIpAddress | 1.3.6.1.4.1.1751.2.18.16.32.1 | ||
| IP Address for remote database server. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| remoteDbServerLogin | 1.3.6.1.4.1.1751.2.18.16.32.2 | ||
| ftp account name for remote database server. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(20) | ||
| remoteDbServerPassword | 1.3.6.1.4.1.1751.2.18.16.32.3 | ||
| ftp account password for remote database server. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(20) | ||
| remoteDbServerDirectory | 1.3.6.1.4.1.1751.2.18.16.32.4 | ||
| directory on remote database server where to save/restore database files from. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(79) | ||
| remoteDbCommand | 1.3.6.1.4.1.1751.2.18.16.32.5 | ||
| remote database operation. | |||
| OBJECT-TYPE | |||
| INTEGER | noOperation(1), remoteSave(2), remoteLoad(3) | ||
| remoteDbOperationStatus | 1.3.6.1.4.1.1751.2.18.16.32.6 | ||
| Current status of remote database command. | |||
| OBJECT-TYPE | |||
| INTEGER | noActivity(1), working(2), doneSuccessfully(3), doneWithError(4), aborted(5) | ||
| remoteDbOperationErrorStatus | 1.3.6.1.4.1.1751.2.18.16.32.7 | ||
| The result at the finish of remote database operation. | |||
| OBJECT-TYPE | |||
| INTEGER | none(0), unableToMakeFtpConnection(1), invalidDirectory(2), unableToOpenDatabaseFile(3), unableToCompleteFtp(4), databaseSanityFail(5), unableToUpdateBackup(6) | ||
| stratumConfig | 1.3.6.1.4.1.1751.2.18.17 | ||
| OBJECT IDENTIFIER | |||
| stratumSyncSource | 1.3.6.1.4.1.1751.2.18.17.1 | ||
| Clock source for the stratum card - lineTiming: must have slot and port specified in stratumPrimaryLineId. compositeClock: local clock must be available. | |||
| OBJECT-TYPE | |||
| INTEGER | lineTiming(1), compositeClock(2), freerun(3), t1BITS(4), e1ETSI(5) | ||
| stratumPrimaryLineId | 1.3.6.1.4.1.1751.2.18.17.2 | ||
| Format SSPP (slot and port #'s) to be used when lineTiming is specified in stratumSyncSource. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| stratumSecondaryLineId | 1.3.6.1.4.1.1751.2.18.17.3 | ||
| Format SSPP (slot and port #'s) to be used if the primary line has failed. Zeros imply that the stratum should switch to holdover mode instead. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| stratumLevel | 1.3.6.1.4.1.1751.2.18.17.4 | ||
| Enable or disable the switching over to stratum 4 when stratum 3 is not possible. | |||
| OBJECT-TYPE | |||
| INTEGER | stratum3(1), stratum4(2) | ||
| stratumLineCommand | 1.3.6.1.4.1.1751.2.18.17.5 | ||
| Forces the stratum card to use one of the two specified lines as its clock source when the stratumSyncSource is lineTiming. | |||
| OBJECT-TYPE | |||
| INTEGER | gotoPrimaryLine(1), gotoSecondaryLine(2) | ||
| stratumLineTimingStatus | 1.3.6.1.4.1.1751.2.18.17.6 | ||
| Represents the source of the current clock. | |||
| OBJECT-TYPE | |||
| INTEGER | primaryLine(1), secondaryLine(2), none(3) | ||
| stratumMode | 1.3.6.1.4.1.1751.2.18.17.7 | ||
| Current status of the primary stratum card. synchronized3(1) stratum is synchronized with accuracy 4.6 x 10e-6 synchronized4(2) stratum is synchronized with accuracy 3.2 x 10e-5 holdover(3) an operating condition of a clock that has lost its controlling input and is using stored data acquired while in normal operation, to control its output freerun(4) an operating condition of the clock whose output signals are internally controlled cardRemoved(5) stratum removed | |||
| OBJECT-TYPE | |||
| INTEGER | synchronized3(1), synchronized4(2), holdover(3), freerun(4), cardRemoved(5) | ||
| stratumBackupMode | 1.3.6.1.4.1.1751.2.18.17.8 | ||
| Current status of the backup stratum card. | |||
| OBJECT-TYPE | |||
| INTEGER | synchronized3(1), synchronized4(2), holdover(3), freerun(4), cardRemoved(5) | ||
| stratumRefFailAction | 1.3.6.1.4.1.1751.2.18.17.9 | ||
| Defines whether the stratum should switch to freerun or holdover on reference clock failure. | |||
| OBJECT-TYPE | |||
| INTEGER | holdover(1), freerun(2) | ||
| stratumPortStatus | 1.3.6.1.4.1.1751.2.18.17.10 | ||
| Current status of the primary stratum card. portFOS indicates port frequency offset. | |||
| OBJECT-TYPE | |||
| INTEGER | unconfigured(1), noalarm(2), portAIS(3), portLOF(4), portLOS(5), portFOS(6) | ||
| stratumBkupPortStatus | 1.3.6.1.4.1.1751.2.18.17.11 | ||
| Current status of the backup stratum card. portFOS indicates port frequency offset. | |||
| OBJECT-TYPE | |||
| INTEGER | unconfigured(1), noalarm(2), portAIS(3), portLOF(4), portLOS(5), portFOS(6) | ||
| activeStratum | 1.3.6.1.4.1.1751.2.18.17.12 | ||
| Current status of the backup stratum card. | |||
| OBJECT-TYPE | |||
| INTEGER | stratumA(1), stratumB(2) | ||
| cellTest | 1.3.6.1.4.1.1751.2.18.18 | ||
| OBJECT IDENTIFIER | |||
| cellTestIfB | 1.3.6.1.4.1.1751.2.18.18.1 | ||
| Interface index used for testing cell transfer. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| cellTestVpiB | 1.3.6.1.4.1.1751.2.18.18.2 | ||
| VPI value for testing cell transfer to an I/O card. Valid range is a number between 0 and 4095. If the I/O card interface is not ATM, then this will always be zero. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| cellTestVcidB | 1.3.6.1.4.1.1751.2.18.18.3 | ||
| Virtual Check Id for testing cell transfer to an I/O card. Valid range is a number between 0 and 65535. If the I/O card interface is frame relay, this field acts as DLCI and the valid range is a number between 0 and 1023. If the I/O card interface is circuit emulation, then this will always be 0. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| cellTestServiceType | 1.3.6.1.4.1.1751.2.18.18.4 | ||
| Service types for testing cell transfer | |||
| OBJECT-TYPE | |||
| INTEGER | ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), cbr4(7), cbr3(8), cbr2(9), cbr1(10) | ||
| cellTestConnType | 1.3.6.1.4.1.1751.2.18.18.5 | ||
| Connection types for testing cell transfer | |||
| OBJECT-TYPE | |||
| INTEGER | simplexTx(1), simplexRx(2), duplex(3) | ||
| cellTestProtocol | 1.3.6.1.4.1.1751.2.18.18.6 | ||
| Protocol (interface type) on the I/O | |||
| OBJECT-TYPE | |||
| INTEGER | atm(1), frame-relay(2), hdlc(4) | ||
| cellTestPayLoadTx | 1.3.6.1.4.1.1751.2.18.18.7 | ||
| PayLoad to be transmitted on I/O interface | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(88) | ||
| cellTestPayLoadRx | 1.3.6.1.4.1.1751.2.18.18.8 | ||
| Last PayLoad received on I/O interface | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(88) | ||
| cellTestAction | 1.3.6.1.4.1.1751.2.18.18.9 | ||
| PayLoad received on I/O interface | |||
| OBJECT-TYPE | |||
| INTEGER | send(1), send-10(2), setupconn(3), stop(4), clearTxStats(5), clearRxStats(6) | ||
| cellTestRxPduCount | 1.3.6.1.4.1.1751.2.18.18.10 | ||
| Valid cells received (Input Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cellTestTxPduCount | 1.3.6.1.4.1.1751.2.18.18.11 | ||
| Valid cells transmitted (Output Billing Count) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cellTestMismatchPduCount | 1.3.6.1.4.1.1751.2.18.18.12 | ||
| Number of times Rx payload mismatched with Tx payload. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cellTestStatus | 1.3.6.1.4.1.1751.2.18.18.13 | ||
| Indicates whether a cellTest test is in progress or not. | |||
| OBJECT-TYPE | |||
| INTEGER | running(1), not-running(2) | ||
| cellTestVUNIB | 1.3.6.1.4.1.1751.2.18.18.14 | ||
| VUNI id for testing cell transfer to an I/O card. This field is valid only for ATM interface. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| sysInfo | 1.3.6.1.4.1.1751.2.18.19 | ||
| OBJECT IDENTIFIER | |||
| sysInfoTxOneCellTotal | 1.3.6.1.4.1.1751.2.18.19.1 | ||
| Total amount of cells within the transmit one cell pool. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| sysInfoTxOneCellUsed | 1.3.6.1.4.1.1751.2.18.19.2 | ||
| Amount of cells currently being used within the transmit one cell pool. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| sysInfoTxOneCellHigh | 1.3.6.1.4.1.1751.2.18.19.3 | ||
| High-water mark of cells used within the transmit one cell pool. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| sysInfoRxOneCellTotal | 1.3.6.1.4.1.1751.2.18.19.4 | ||
| Total amount of cells within the receive one cell pool. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| sysInfoRxOneCellUsed | 1.3.6.1.4.1.1751.2.18.19.5 | ||
| Amount of cells currently being used within the receive one cell pool. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| sysInfoRxOneCellHigh | 1.3.6.1.4.1.1751.2.18.19.6 | ||
| High-water mark of cells used within the receive one cell pool. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| sysInfoRxMultiCellTotal | 1.3.6.1.4.1.1751.2.18.19.7 | ||
| Total amount of multi-cells within the receive multi-cell pool. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| sysInfoRxMultiCellUsed | 1.3.6.1.4.1.1751.2.18.19.8 | ||
| Amount of multi-cells currently being used within the receive multi-cell pool. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| sysInfoRxMultiCellHigh | 1.3.6.1.4.1.1751.2.18.19.9 | ||
| High-water mark of multi-cells used within the receive multi-cell pool. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| sysInfoMsgPoolTotal | 1.3.6.1.4.1.1751.2.18.19.10 | ||
| Total amount of messages within the message pool. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| sysInfoMsgPoolUsed | 1.3.6.1.4.1.1751.2.18.19.11 | ||
| Amount of messages currently being used within the message pool. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| sysInfoMsgPoolHigh | 1.3.6.1.4.1.1751.2.18.19.12 | ||
| High-water mark of messages used within the message pool. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| sysInfoDiscFreeKBytes | 1.3.6.1.4.1.1751.2.18.19.13 | ||
| Amount of disc free space available in KB's. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| sysInfoCpuUtilization1 | 1.3.6.1.4.1.1751.2.18.19.14 | ||
| xx.yy% - cpuUtilization1 is the xx part of it. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..99 | ||
| sysInfoCpuUtilization2 | 1.3.6.1.4.1.1751.2.18.19.15 | ||
| xx.yy% - cpuUtilization2 is the yy part of it. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..99 | ||
| sysInfoSysUptime | 1.3.6.1.4.1.1751.2.18.19.16 | ||
| Amount of time cpu has been up in seconds. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| sysInfoBadCellRx | 1.3.6.1.4.1.1751.2.18.19.17 | ||
| The number of bad cells (BIP16) received so far. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| sysInfoMisaligned | 1.3.6.1.4.1.1751.2.18.19.18 | ||
| The number of misaligned cells received so far. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| sysInfoClockAErr | 1.3.6.1.4.1.1751.2.18.19.19 | ||
| Value is 1, TRUE, if the clock on backplane A is errored, otherwise, the value is 0, FALSE. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1 | ||
| sysInfoClockBErr | 1.3.6.1.4.1.1751.2.18.19.20 | ||
| Value is 1, TRUE, if the clock on backplane B is errored, otherwise, the value is 0, FALSE. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1 | ||
| sysInfoBIPAErr | 1.3.6.1.4.1.1751.2.18.19.21 | ||
| Value is 1, TRUE, if the cell circuit on backplane A is errored, otherwise, the value is 0, FALSE. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1 | ||
| sysInfoBIPBErr | 1.3.6.1.4.1.1751.2.18.19.22 | ||
| Value is 1, TRUE, if the cell circuit on backplane B is errored, otherwise, the value is 0, FALSE. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1 | ||
| sysInfoDiscTotalKBytes | 1.3.6.1.4.1.1751.2.18.19.23 | ||
| Amount of disc space available in KB's. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| sysInfoRAMFreeKBytes | 1.3.6.1.4.1.1751.2.18.19.24 | ||
| Amount of RAM memory available for use in KB's. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| sysInfoRAMTotalKBytes | 1.3.6.1.4.1.1751.2.18.19.25 | ||
| Amount of RAM memory available on cpu card in KB's. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| msgPoolViewTable | 1.3.6.1.4.1.1751.2.18.19.26 | ||
| Table of Msg Pools In the System, Used only for diagnostic purposes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MsgPoolViewEntry | |||
| msgPoolViewEntry | 1.3.6.1.4.1.1751.2.18.19.26.1 | ||
| Row definition of Msg Pool Table | |||
| OBJECT-TYPE | |||
| MsgPoolViewEntry | |||
| msgPoolViewIndex | 1.3.6.1.4.1.1751.2.18.19.26.1.1 | ||
| It is the index of the MsgPool array for which the information is requested. Information about Msgs Which are not there in the free pool is returned.A msg is said to be out of the free pool by comparing the signature. The limit being the max number of msgs allowed on the system | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| msgPoolViewTskId | 1.3.6.1.4.1.1751.2.18.19.26.1.2 | ||
| Task Id of the Sender of the Particular Msg, This will give the integer value, has to be converted to hex for comparison | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| msgPoolViewTskName | 1.3.6.1.4.1.1751.2.18.19.26.1.3 | ||
| Task Name of the Sender of the Particular Msg | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(20) | ||
| msgPoolViewMsgCmd | 1.3.6.1.4.1.1751.2.18.19.26.1.4 | ||
| msgCmd being sent by the sending Task | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| primaryCpuHwType | 1.3.6.1.4.1.1751.2.18.19.27 | ||
| Indicates the hardware version type of the primary CPU. version1: 150MHz Saturn13 board supporting 8MB-64MB Memory. version2: 200MHz Saturn15 board supporting 64MB-256MB Memory. | |||
| OBJECT-TYPE | |||
| INTEGER | notKnown(1), version1(2), version2(3) | ||
| secondaryCpuHwType | 1.3.6.1.4.1.1751.2.18.19.28 | ||
| Indicates the hardware version type of the secondary CPU. version1: 150MHz Saturn13 board supporting 8MB-64MB Memory. version2: 200MHz Saturn15 board supporting 64MB-256MB Memory. | |||
| OBJECT-TYPE | |||
| INTEGER | notKnown(1), version1(2), version2(3) | ||
| sysInfoDiskCheck | 1.3.6.1.4.1.1751.2.18.19.29 | ||
| Indicates the checking status of the disk in CPU card. | |||
| OBJECT-TYPE | |||
| INTEGER | ok(1), error(2) | ||
| switchAlarmStatus | 1.3.6.1.4.1.1751.2.18.19.30 | ||
| Current status of the alarm on the switch. notAvailable - The alarm status could not be retreived. none - No alarm is present. minor, major, critical - An alarm of the enumerated type is present | |||
| OBJECT-TYPE | |||
| INTEGER | notAvailable(1), none(2), minor(3), major(4), critical(5) | ||
| ethernetConfig | 1.3.6.1.4.1.1751.2.18.20 | ||
| OBJECT IDENTIFIER | |||
| arp1Table | 1.3.6.1.4.1.1751.2.18.20.1 | ||
| Table of ARP cache data. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Arp1Entry | |||
| arp1Entry | 1.3.6.1.4.1.1751.2.18.20.1.1 | ||
| Row definition for ARP cache. | |||
| OBJECT-TYPE | |||
| Arp1Entry | |||
| arp1CardSlot | 1.3.6.1.4.1.1751.2.18.20.1.1.1 | ||
| Slot ethernet card is in. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..16 | ||
| arp1BridgeGroupNum | 1.3.6.1.4.1.1751.2.18.20.1.1.2 | ||
| Bridge Group the entry belongs to. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..999 | ||
| arp1IpAddress | 1.3.6.1.4.1.1751.2.18.20.1.1.3 | ||
| Entry IP address. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| arp1PhysicalAddr | 1.3.6.1.4.1.1751.2.18.20.1.1.4 | ||
| Entry physical address. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(6) | ||
| arp1EntryAge | 1.3.6.1.4.1.1751.2.18.20.1.1.5 | ||
| Age of cache entry. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| arp2Table | 1.3.6.1.4.1.1751.2.18.20.2 | ||
| Table of ARP cache data. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Arp2Entry | |||
| arp2Entry | 1.3.6.1.4.1.1751.2.18.20.2.1 | ||
| Row definition for ARP cache. | |||
| OBJECT-TYPE | |||
| Arp2Entry | |||
| arp2CardSlot | 1.3.6.1.4.1.1751.2.18.20.2.1.1 | ||
| Slot ethernet card is in. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..16 | ||
| arp2BridgeGroupNum | 1.3.6.1.4.1.1751.2.18.20.2.1.2 | ||
| Bridge Group the entry belongs to. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..999 | ||
| arp2PhysicalAddr | 1.3.6.1.4.1.1751.2.18.20.2.1.3 | ||
| Entry physical address. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(6) | ||
| arp2IpAddress | 1.3.6.1.4.1.1751.2.18.20.2.1.4 | ||
| Entry IP address. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| arp2EntryAge | 1.3.6.1.4.1.1751.2.18.20.2.1.5 | ||
| Age of cache entry. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| bridgeCacheTable | 1.3.6.1.4.1.1751.2.18.20.3 | ||
| Table of bridge cache data. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| BridgeCacheEntry | |||
| bridgeCacheEntry | 1.3.6.1.4.1.1751.2.18.20.3.1 | ||
| Row definition for bridge cache. | |||
| OBJECT-TYPE | |||
| BridgeCacheEntry | |||
| bridgeCacheCardSlot | 1.3.6.1.4.1.1751.2.18.20.3.1.1 | ||
| Slot ethernet card is in. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..16 | ||
| bridgeCacheBridgeGroupNum | 1.3.6.1.4.1.1751.2.18.20.3.1.2 | ||
| Bridge Group the entry belongs to. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..999 | ||
| bridgeCachePhysicalAddr | 1.3.6.1.4.1.1751.2.18.20.3.1.3 | ||
| Entry physical address. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(6) | ||
| bridgeCacheType | 1.3.6.1.4.1.1751.2.18.20.3.1.4 | ||
| Type of Entry. | |||
| OBJECT-TYPE | |||
| INTEGER | learned(1), permanent(2), policy(3) | ||
| bridgeCacheSourcePort | 1.3.6.1.4.1.1751.2.18.20.3.1.5 | ||
| Port entry was obtained from. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..75 | ||
| bridgeCacheEntryAge | 1.3.6.1.4.1.1751.2.18.20.3.1.6 | ||
| Age of cache entry. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| alarmConfig | 1.3.6.1.4.1.1751.2.18.21 | ||
| OBJECT IDENTIFIER | |||
| alarmStatusInputBitmap | 1.3.6.1.4.1.1751.2.18.21.1 | ||
| Remote status from external device. bit = 0 closed, bit = 1 open, LSB 15 bits represent 15 external inputs. MSB bit 15 is always 0. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(2) | ||
| alarmStatusOutputBitmap | 1.3.6.1.4.1.1751.2.18.21.2 | ||
| Control output for alarm card. bit = 0 deactivated, bit = 1 activated, LSB 4 bits represent 4 external outputs. Bit 0 through bit 3 is output 1 through 4 Control output 4 will be activated upon power failure. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1) | ||
| alarmSeverityLevelBitmap | 1.3.6.1.4.1.1751.2.18.21.3 | ||
| Alarm severity level. bit = 0 noAlarm, bit = 1 Alarm present, LSB 3 bits represent severity levels. bit 0 = Minor Alarm, bit 1 = Major Alarm, bit 2 = Critical Alarm. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1) | ||
| alarmAcoStatusBitmap | 1.3.6.1.4.1.1751.2.18.21.4 | ||
| Audio alarm status. bit = 0 No alarm cutoff, bit = 1 Alarm cutoff, LSB 3 bits represent audio alarms. bit 0 = Local alarm cutoff, bit 1 = remote alarm cutoff, bit 2 = composite alarm cutoff status. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1) | ||
| sysTest | 1.3.6.1.4.1.1751.2.18.22 | ||
| OBJECT IDENTIFIER | |||
| oamTest | 1.3.6.1.4.1.1751.2.18.22.1 | ||
| OBJECT IDENTIFIER | |||
| oamTestIfB | 1.3.6.1.4.1.1751.2.18.22.1.1 | ||
| Interface index used for starting loopback test. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| oamTestVpiB | 1.3.6.1.4.1.1751.2.18.22.1.2 | ||
| VPI value under testing for oam loopback test. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| oamTestVciB | 1.3.6.1.4.1.1751.2.18.22.1.3 | ||
| VCI value under testing for oam loopback test. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| oamTestStatus | 1.3.6.1.4.1.1751.2.18.22.1.4 | ||
| Inidcates the current status of oam test. | |||
| OBJECT-TYPE | |||
| INTEGER | not-running(1), running(2), successful(3), failure(4), timedout(5), waiting-for-response(6) | ||
| oamTestAction | 1.3.6.1.4.1.1751.2.18.22.1.5 | ||
| Test action to be performed. | |||
| OBJECT-TYPE | |||
| INTEGER | sendLoopback(1), sendContinuously(2), stopTest(3), resetTxCount(4), resetRxCount(5), resetMismatchCount(6) | ||
| oamTestTxCount | 1.3.6.1.4.1.1751.2.18.22.1.6 | ||
| Valid cells transmitted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oamTestRxCount | 1.3.6.1.4.1.1751.2.18.22.1.7 | ||
| Valid cells received. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oamTestMismatchCount | 1.3.6.1.4.1.1751.2.18.22.1.8 | ||
| Number of times Rx correlation tag is mismatched with the Tx correlation tag. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oamTestLocationID | 1.3.6.1.4.1.1751.2.18.22.1.9 | ||
| Location ID of the ATM Node where the loopback is to occur. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(16) | ||
| oamTestLoopbackType | 1.3.6.1.4.1.1751.2.18.22.1.10 | ||
| OAM Loopback type. Determines whether to send ete or segment loopback cell, and the value of location Id field in the cell. Only for specific-location value, user specified locationId field value taken into account. | |||
| OBJECT-TYPE | |||
| INTEGER | end-to-end(1), segment-endpoint(2), next-connection-point(3), specific-location(4) | ||
| oamActDeactTable | 1.3.6.1.4.1.1751.2.18.22.2 | ||
| Table of oam activate and deactivate functions | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| OamActDeactEntry | |||
| oamActDeactEntry | 1.3.6.1.4.1.1751.2.18.22.2.1 | ||
| Row definition of oam activate and deactivate | |||
| OBJECT-TYPE | |||
| OamActDeactEntry | |||
| oamActDeactIfB | 1.3.6.1.4.1.1751.2.18.22.2.1.1 | ||
| Interface index for an OAM CC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| oamActDeactVpiB | 1.3.6.1.4.1.1751.2.18.22.2.1.2 | ||
| VPI value for an oam CC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| oamActDeactVciB | 1.3.6.1.4.1.1751.2.18.22.2.1.3 | ||
| VCI value for oam CC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| oamActDeactFuncType | 1.3.6.1.4.1.1751.2.18.22.2.1.4 | ||
| OAM Function type represents the OAM flow for activation or deactivattion for this connection. the possible function types activated in one connection are : fpm-and-br : forward performance monitoring/backward reporting fpm-only : forward performance monitoring continuity-check : continuity check pmbr-and-cc : forward performance monitoring/backward reporting and continuity check pm-and-cc : forward performance monitoring and continuity check | |||
| OBJECT-TYPE | |||
| INTEGER | fpm-and-br(1), fpm-only(2), continuity-check(3), pmbr-and-cc(4), pm-and-cc(5) | ||
| oamActDeactDirFlow | 1.3.6.1.4.1.1751.2.18.22.2.1.5 | ||
| The direction in which cells will be transmitted. | |||
| OBJECT-TYPE | |||
| INTEGER | towards-far-end(1), towards-near-end(2), both-way(3) | ||
| oamActDeactFlowType | 1.3.6.1.4.1.1751.2.18.22.2.1.6 | ||
| Flow Type. | |||
| OBJECT-TYPE | |||
| INTEGER | end-to-end(1), segment(2) | ||
| oamActDeactBlkSizeAB | 1.3.6.1.4.1.1751.2.18.22.2.1.7 | ||
| Block Size A-B represents the size of the block of user cells taken into consideration for performance monitoring in A-B direction. | |||
| OBJECT-TYPE | |||
| INTEGER | size128(1), size256(2), size512(3), size1024(4), size4096(5), size8192(6), size16384(7), size32768(8), size2048(9) | ||
| oamActDeactBlkSizeBA | 1.3.6.1.4.1.1751.2.18.22.2.1.8 | ||
| Block Size A-B is the size of the block of user cells taken into consideration for performance monitoring in B-A direction. | |||
| OBJECT-TYPE | |||
| INTEGER | size128(1), size256(2), size512(3), size1024(4), size4096(5), size8192(6), size16384(7), size32768(8), size2048(9) | ||
| oamActDeactStsSrcPointEteCC | 1.3.6.1.4.1.1751.2.18.22.2.1.9 | ||
| Source point showed in the status portion displays the current status of Activation or Deactivation request for the source point | |||
| OBJECT-TYPE | |||
| INTEGER | activated(1), deactivated(2), waitActConfirm(3), waitDeactConfirm(4) | ||
| oamActDeactStsSnkPointEteCC | 1.3.6.1.4.1.1751.2.18.22.2.1.10 | ||
| Sink point showed in the status portion displays the current status of Activation or Deactivation request for the sink point | |||
| OBJECT-TYPE | |||
| INTEGER | activated(1), deactivated(2), waitActConfirm(3), waitDeactConfirm(4) | ||
| oamActDeactRsltPrevReq | 1.3.6.1.4.1.1751.2.18.22.2.1.11 | ||
| Cause of Failure shows the reasons of failure of the last activation request on this connection form the local user. | |||
| OBJECT-TYPE | |||
| INTEGER | denied(1), timedout(2), locResrcUnavl(3), oamUnsupported(4), reqCancelled(5), funcNotImplemented(6), none(7), successful(8) | ||
| oamActDeactRowStatus | 1.3.6.1.4.1.1751.2.18.22.2.1.12 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| oamActDeactStsSrcPointEtePM | 1.3.6.1.4.1.1751.2.18.22.2.1.13 | ||
| Source point showed in the status portion displays the current status of Activation or Deactivation request for the source point | |||
| OBJECT-TYPE | |||
| INTEGER | activated(1), deactivated(2), waitActConfirm(3), waitDeactConfirm(4) | ||
| oamActDeactStsSnkPointEtePM | 1.3.6.1.4.1.1751.2.18.22.2.1.14 | ||
| Sink point showed in the status portion displays the current status of Activation or Deactivation request for the sink point | |||
| OBJECT-TYPE | |||
| INTEGER | activated(1), deactivated(2), waitActConfirm(3), waitDeactConfirm(4) | ||
| oamActDeactStsSrcPointEtePMBR | 1.3.6.1.4.1.1751.2.18.22.2.1.15 | ||
| Source point showed in the status portion displays the current status of Activation or Deactivation request for the source point | |||
| OBJECT-TYPE | |||
| INTEGER | activated(1), deactivated(2), waitActConfirm(3), waitDeactConfirm(4) | ||
| oamActDeactStsSnkPointEtePMBR | 1.3.6.1.4.1.1751.2.18.22.2.1.16 | ||
| Sink point showed in the status portion displays the current status of Activation or Deactivation request for the sink point | |||
| OBJECT-TYPE | |||
| INTEGER | activated(1), deactivated(2), waitActConfirm(3), waitDeactConfirm(4) | ||
| oamActDeactBRBlockError | 1.3.6.1.4.1.1751.2.18.22.2.1.17 | ||
| Backware reporting Block error for PM connection. Valid range is a number between 0 and 32768. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..32768 | ||
| oamActDeactBRLostInsertedCell | 1.3.6.1.4.1.1751.2.18.22.2.1.18 | ||
| Backware reporting lost inserted cell for PM connection. Valid range is a number between 0 and 32768. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..32768 | ||
| oamActDeactBRMisInsertedCell | 1.3.6.1.4.1.1751.2.18.22.2.1.19 | ||
| Backware reporting misinserted cell for PM connection. Valid range is a number between 0 and 32768. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..32768 | ||
| oamActDeactStsSrcPointSegPM | 1.3.6.1.4.1.1751.2.18.22.2.1.20 | ||
| Source point showed in the status portion displays the current status of Activation or Deactivation request for the source point | |||
| OBJECT-TYPE | |||
| INTEGER | activated(1), deactivated(2), waitActConfirm(3), waitDeactConfirm(4) | ||
| oamActDeactStsSnkPointSegPM | 1.3.6.1.4.1.1751.2.18.22.2.1.21 | ||
| Sink point showed in the status portion displays the current status of Activation or Deactivation request for the sink point | |||
| OBJECT-TYPE | |||
| INTEGER | activated(1), deactivated(2), waitActConfirm(3), waitDeactConfirm(4) | ||
| oamActDeactStsSrcPointSegPMBR | 1.3.6.1.4.1.1751.2.18.22.2.1.22 | ||
| Source point showed in the status portion displays the current status of Activation or Deactivation request for the source point | |||
| OBJECT-TYPE | |||
| INTEGER | activated(1), deactivated(2), waitActConfirm(3), waitDeactConfirm(4) | ||
| oamActDeactStsSnkPointSegPMBR | 1.3.6.1.4.1.1751.2.18.22.2.1.23 | ||
| Sink point showed in the status portion displays the current status of Activation or Deactivation request for the sink point | |||
| OBJECT-TYPE | |||
| INTEGER | activated(1), deactivated(2), waitActConfirm(3), waitDeactConfirm(4) | ||
| oamActDeactStsSrcPointSegCC | 1.3.6.1.4.1.1751.2.18.22.2.1.24 | ||
| Source point showed in the status portion displays the current status of Activation or Deactivation request for the source point | |||
| OBJECT-TYPE | |||
| INTEGER | activated(1), deactivated(2), waitActConfirm(3), waitDeactConfirm(4) | ||
| oamActDeactStsSnkPointSegCC | 1.3.6.1.4.1.1751.2.18.22.2.1.25 | ||
| Sink point showed in the status portion displays the current status of Activation or Deactivation request for the sink point | |||
| OBJECT-TYPE | |||
| INTEGER | activated(1), deactivated(2), waitActConfirm(3), waitDeactConfirm(4) | ||
| oamLoopbackTable | 1.3.6.1.4.1.1751.2.18.22.3 | ||
| Table of oam loopback functions | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| OamLoopbackEntry | |||
| oamLoopbackEntry | 1.3.6.1.4.1.1751.2.18.22.3.1 | ||
| Row definition of oam loop back | |||
| OBJECT-TYPE | |||
| OamLoopbackEntry | |||
| oamLpbkIfB | 1.3.6.1.4.1.1751.2.18.22.3.1.1 | ||
| Interface index used for starting loopback test. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| oamLpbkVpiB | 1.3.6.1.4.1.1751.2.18.22.3.1.2 | ||
| VPI value under testing for oam loopback test. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| oamLpbkVciB | 1.3.6.1.4.1.1751.2.18.22.3.1.3 | ||
| VCI value under testing for oam loopback test. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| oamLoopbackType | 1.3.6.1.4.1.1751.2.18.22.3.1.4 | ||
| OAM Loopback type. Determines whether to send ete or segment loopback cell, and the value of location Id field in the cell. Only for specific-location value, user specified locationId field value taken into account. | |||
| OBJECT-TYPE | |||
| INTEGER | end-to-end(1), segment-endpoint(2), next-connection-point(3), specific-location(4) | ||
| oamLpbkLocationID | 1.3.6.1.4.1.1751.2.18.22.3.1.5 | ||
| Location ID of the ATM Node where the loopback is to occur. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(16) | ||
| oamLpbkAction | 1.3.6.1.4.1.1751.2.18.22.3.1.6 | ||
| Test action to be performed. endLoopbackContinuously is not used. | |||
| OBJECT-TYPE | |||
| INTEGER | sendLoopbackOnce(1), sendLoopbackContinuously(2), stopTest(3), resetStats(4) | ||
| oamLpbkStatus | 1.3.6.1.4.1.1751.2.18.22.3.1.7 | ||
| Inidcates the current status of oam test. | |||
| OBJECT-TYPE | |||
| INTEGER | inactive(1), waiting-for-response(2), successful(3), timedout(4) | ||
| oamLpbkTxCount | 1.3.6.1.4.1.1751.2.18.22.3.1.8 | ||
| Valid cells transmitted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oamLpbkRxCount | 1.3.6.1.4.1.1751.2.18.22.3.1.9 | ||
| Valid cells received. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oamLpbkMismatchCount | 1.3.6.1.4.1.1751.2.18.22.3.1.10 | ||
| Number of times Rx correlation tag is mismatched with the Tx correlation tag. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| oamLpbkTimeout | 1.3.6.1.4.1.1751.2.18.22.3.1.11 | ||
| number of time out | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| fwDriverSup | 1.3.6.1.4.1.1751.2.18.23 | ||
| OBJECT IDENTIFIER | |||
| cardFwVerTable | 1.3.6.1.4.1.1751.2.18.23.1 | ||
| Table of card firware version status | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| CardFwVerEntry | |||
| cardFwVerEntry | 1.3.6.1.4.1.1751.2.18.23.1.1 | ||
| Row definition for card firmware version status | |||
| OBJECT-TYPE | |||
| CardFwVerEntry | |||
| cardFwVerSlot | 1.3.6.1.4.1.1751.2.18.23.1.1.1 | ||
| card slot number | |||
| OBJECT-TYPE | |||
| INTEGER | 1..24 | ||
| cardFwVerType | 1.3.6.1.4.1.1751.2.18.23.1.1.2 | ||
| Card type | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cardFwVerCurrent | 1.3.6.1.4.1.1751.2.18.23.1.1.3 | ||
| Card firmware version currently loaded on firmware | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(13) | ||
| cardFwVerCurrentIsDefault | 1.3.6.1.4.1.1751.2.18.23.1.1.4 | ||
| curent driver is default | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| cardFwVerNext | 1.3.6.1.4.1.1751.2.18.23.1.1.5 | ||
| Card firmware version that user wants to upgrade to. The values are limited those supported by the release. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(13) | ||
| cardFwVerNextIsDefault | 1.3.6.1.4.1.1751.2.18.23.1.1.6 | ||
| next driver is default | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1 | ||
| cardFwDnldStatus | 1.3.6.1.4.1.1751.2.18.23.1.1.7 | ||
| firmware download procedure status | |||
| OBJECT-TYPE | |||
| INTEGER | failed(1), retry(2), progress(3), done(4), wrongCardType(5), wrongCardSType(6), drvUnavailable(7), drvInvHdrChksum(8), drvInvRecChksum(9), reqRepTimeout(10), cmplRepTimeout(11), mapCorrupted(12), mapUnavailable(13), mapInvChksum(14), mapNameImprop(15), cfgCorrupted(16), cfgUnavailable(17), cfgInvChksum(18), removeCardBeforeFinish(19), ioUnsupported(20) | ||
| cardFwRetries | 1.3.6.1.4.1.1751.2.18.23.1.1.8 | ||
| Number of times firmware download procedure failed consequently. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| fwDriverTable | 1.3.6.1.4.1.1751.2.18.23.2 | ||
| Table of available firmware drivers | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| FwDriverEntry | |||
| fwDriverEntry | 1.3.6.1.4.1.1751.2.18.23.2.1 | ||
| Row definition for available firmware drivers | |||
| OBJECT-TYPE | |||
| FwDriverEntry | |||
| fwSlotId | 1.3.6.1.4.1.1751.2.18.23.2.1.1 | ||
| driver slot id | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| fwDriverType | 1.3.6.1.4.1.1751.2.18.23.2.1.2 | ||
| firmware driver type - definition consistent with cardType. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| fwIsDefault | 1.3.6.1.4.1.1751.2.18.23.2.1.3 | ||
| firmware driver wether default or not | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| fwDriverName | 1.3.6.1.4.1.1751.2.18.23.2.1.4 | ||
| firmware driver file name | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(13) | ||
| fwDriverFrn | 1.3.6.1.4.1.1751.2.18.23.2.1.5 | ||
| Firmware Release Number of firmware driver | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| fwDriverSize | 1.3.6.1.4.1.1751.2.18.23.2.1.6 | ||
| file size of firmware driver | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| fwDriverChecksum | 1.3.6.1.4.1.1751.2.18.23.2.1.7 | ||
| checksum of firmware driver file | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprConfig | 1.3.6.1.4.1.1751.2.18.24 | ||
| OBJECT IDENTIFIER | |||
| viprRouterConfigTable | 1.3.6.1.4.1.1751.2.18.24.1 | ||
| Table of Vipr Router Instance Information | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ViprRouterConfigEntry | |||
| viprRouterConfigEntry | 1.3.6.1.4.1.1751.2.18.24.1.1 | ||
| definition for VIPR Route instance attributes | |||
| OBJECT-TYPE | |||
| ViprRouterConfigEntry | |||
| viprSlot | 1.3.6.1.4.1.1751.2.18.24.1.1.1 | ||
| The slot number of the Virtual Router card (SS) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprRouterId | 1.3.6.1.4.1.1751.2.18.24.1.1.2 | ||
| A unique Id for the Router Instance in a router card | |||
| OBJECT-TYPE | |||
| INTEGER | 1..6 | ||
| viprRouterName | 1.3.6.1.4.1.1751.2.18.24.1.1.3 | ||
| The ASCII name of the Router Instance | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(32) | ||
| viprRouterNoOfInterfaces | 1.3.6.1.4.1.1751.2.18.24.1.1.4 | ||
| This variable describes the no of interfaces defined in the Router Instance | |||
| OBJECT-TYPE | |||
| INTEGER | 1..99 | ||
| viprRouterNoOfRoutes | 1.3.6.1.4.1.1751.2.18.24.1.1.5 | ||
| This variable describes the no of static routes defined in the Router Instance | |||
| OBJECT-TYPE | |||
| INTEGER | 1..1024 | ||
| viprRouterAdminStatus | 1.3.6.1.4.1.1751.2.18.24.1.1.6 | ||
| This variable represents the various X.731 states the Router state machine can take Administartively | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| viprRouterOperStatus | 1.3.6.1.4.1.1751.2.18.24.1.1.7 | ||
| This variable represents the various X.731 states the Router state machine can take operationally | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2), unlocked-Init(3), unlocked-Disable(4), locked-Shutting(5) | ||
| viprRouterInitTmr | 1.3.6.1.4.1.1751.2.18.24.1.1.8 | ||
| This variable describes the waiting period in the locked-Init state before moving onto locked-Diable state. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprRouterDisabWarnTmr | 1.3.6.1.4.1.1751.2.18.24.1.1.9 | ||
| This variable describes the periodicity in which the error messages are to be flashed when the system is in unlocked-Disable state. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprRouterShutDwnWarnTmr | 1.3.6.1.4.1.1751.2.18.24.1.1.10 | ||
| This variable describes the periodicity in which the error messages are to be flashed when the system is in locked-Shutting state. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprRouterDisableWarning | 1.3.6.1.4.1.1751.2.18.24.1.1.11 | ||
| This variable when disabled will mask all the warning messages. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| viprRouterDisableReason | 1.3.6.1.4.1.1751.2.18.24.1.1.12 | ||
| This variable describes the reason why the Router in the unlocked-Disabled state. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), manual(2), automatic(3) | ||
| viprRouterRowStatus | 1.3.6.1.4.1.1751.2.18.24.1.1.13 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| viprIntfConfigTable | 1.3.6.1.4.1.1751.2.18.24.2 | ||
| Table of Vipr Interface Config Information | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ViprIntfConfigEntry | |||
| viprIntfConfigEntry | 1.3.6.1.4.1.1751.2.18.24.2.1 | ||
| definition for VIPR interface attributes | |||
| OBJECT-TYPE | |||
| ViprIntfConfigEntry | |||
| viprIntfId | 1.3.6.1.4.1.1751.2.18.24.2.1.1 | ||
| A unique Id for the Interface in a router instance | |||
| OBJECT-TYPE | |||
| Integer32 | 1..16 | ||
| viprIntfIPAddress | 1.3.6.1.4.1.1751.2.18.24.2.1.2 | ||
| The IP address of the entrprise network to which the interface is attached to | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| viprIntfIPNetMask | 1.3.6.1.4.1.1751.2.18.24.2.1.3 | ||
| The IP Subnet Mask of the entrprise network to which the interface is attached to | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| viprIntfAdminStatus | 1.3.6.1.4.1.1751.2.18.24.2.1.4 | ||
| This variable represents the various X.731 states the Interfce statemachine can take Administratively | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| viprIntfOperStatus | 1.3.6.1.4.1.1751.2.18.24.2.1.5 | ||
| This variable represents the various X.731 states the Interfce statemachine can take operationally | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2), unlocked-Init(3), unlocked-Disable(4), locked-Shutting(5) | ||
| viprIntfInitTmr | 1.3.6.1.4.1.1751.2.18.24.2.1.6 | ||
| This variable describes the waiting period in the locked-Init state before moving onto locked-Diable state. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprIntfDisabWarnTmr | 1.3.6.1.4.1.1751.2.18.24.2.1.7 | ||
| This variable describes the periodicity in which the error messages are to be flashed when the system is in unlocked-Disable state. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprIntfShutDwnWarnTmr | 1.3.6.1.4.1.1751.2.18.24.2.1.8 | ||
| This variable describes the periodicity in which the error messages are to be flashed when the system is in locked-Shutting state. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprIntfDisableWarning | 1.3.6.1.4.1.1751.2.18.24.2.1.9 | ||
| This variable when disabled will mask all the Disable warning messages. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| viprIntfDisableReason | 1.3.6.1.4.1.1751.2.18.24.2.1.10 | ||
| This variable describes the reason why the Interface in the unlocked-Disabled state. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), intfDisabled(2), routDisabled(3) | ||
| viprIntfRipVersion | 1.3.6.1.4.1.1751.2.18.24.2.1.11 | ||
| This specifies the version of RIP that interface supports. | |||
| OBJECT-TYPE | |||
| INTEGER | version-1(1), version-2(2) | ||
| viprIntfRipMode | 1.3.6.1.4.1.1751.2.18.24.2.1.12 | ||
| This specifies the mode in which RIP protocol runs. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), active(2), passive(3) | ||
| viprIntfRowStatus | 1.3.6.1.4.1.1751.2.18.24.2.1.13 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| viprIntfRipLineType | 1.3.6.1.4.1.1751.2.18.24.2.1.14 | ||
| This specifies the line type when the RIP version is 2. When the RIP version is 1, the RIP line type will be set to broadcast(1). | |||
| OBJECT-TYPE | |||
| INTEGER | broadcast(1), multicast(2) | ||
| viprIntfAuthPasswd | 1.3.6.1.4.1.1751.2.18.24.2.1.15 | ||
| The authentication password for RIP version 2 | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(16) | ||
| viprSubChnlConfigTable | 1.3.6.1.4.1.1751.2.18.24.3 | ||
| Table of Vipr Sub Channel Config Information | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ViprSubChnlConfigEntry | |||
| viprSubChnlConfigEntry | 1.3.6.1.4.1.1751.2.18.24.3.1 | ||
| definition for VIPR sub channel attributes | |||
| OBJECT-TYPE | |||
| ViprSubChnlConfigEntry | |||
| viprSubChnlId | 1.3.6.1.4.1.1751.2.18.24.3.1.1 | ||
| A unique Id for the sub channel in the interface | |||
| OBJECT-TYPE | |||
| Integer32 | 1..3 | ||
| viprSubChnlIntfIndex | 1.3.6.1.4.1.1751.2.18.24.3.1.2 | ||
| The Slot Port Channel to which the IP Packet to be forwarded when the TOS specified in the incoming IP packet is matched to the TosValue, TosMask pair | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| viprSubChnlTrafficType | 1.3.6.1.4.1.1751.2.18.24.3.1.3 | ||
| The type of interface configured on the SSPPCCC, viprSubChnlIntfIndex | |||
| OBJECT-TYPE | |||
| INTEGER | atm(1), fR(2), bridge(3), routing(4), inband(5) | ||
| viprSubChnlLlcEncapType | 1.3.6.1.4.1.1751.2.18.24.3.1.4 | ||
| The encapsulation technique used in making IP packet to ATM cell | |||
| OBJECT-TYPE | |||
| INTEGER | vc(1), llcSnap(2) | ||
| viprSubChnlMacEncapType | 1.3.6.1.4.1.1751.2.18.24.3.1.5 | ||
| The encapsulation technique used in making IP packet to ATM cell | |||
| OBJECT-TYPE | |||
| INTEGER | macHdr(1), noMacHdr(2) | ||
| viprSubChnlTosFeature | 1.3.6.1.4.1.1751.2.18.24.3.1.6 | ||
| Allow the user to set the TOS values or not | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| viprSubChnlTosValue | 1.3.6.1.4.1.1751.2.18.24.3.1.7 | ||
| The type of service specified in IP packet masked with viprSubChnlTosMask has to be equal to this value in order to have the IP packets getting forwarded in this sub channel | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| viprSubChnlTosMask | 1.3.6.1.4.1.1751.2.18.24.3.1.8 | ||
| The Type of Service mask | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| viprSubChnlVpiDlci | 1.3.6.1.4.1.1751.2.18.24.3.1.9 | ||
| The VPI/DLCI value of the connection | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| viprSubChnlVci | 1.3.6.1.4.1.1751.2.18.24.3.1.10 | ||
| The VCI value of the connection | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4096 | ||
| viprSubChnlSarType | 1.3.6.1.4.1.1751.2.18.24.3.1.11 | ||
| The SAR Type supported for the connection | |||
| OBJECT-TYPE | |||
| INTEGER | aal5(1) | ||
| viprSubChnlServiceType | 1.3.6.1.4.1.1751.2.18.24.3.1.12 | ||
| The Service types that are supported | |||
| OBJECT-TYPE | |||
| INTEGER | gold(1), silver(2), bronze(3) | ||
| viprSubChnlFwdErrCorrection | 1.3.6.1.4.1.1751.2.18.24.3.1.13 | ||
| The Forward error correction to be used | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), eighthRate(2), quarterRate(3), halfRate(4), autoHiQ(5), auto(6), autoLoQ(7) | ||
| viprSubChnlInterworkingType | 1.3.6.1.4.1.1751.2.18.24.3.1.14 | ||
| The Encapsulation type used for Frame relay subchannels | |||
| OBJECT-TYPE | |||
| INTEGER | frf8(1) | ||
| viprSubChnlFrameSize | 1.3.6.1.4.1.1751.2.18.24.3.1.15 | ||
| The value of this object is the size in octets of the largest frame relay information field for this PVC in the ingress direction (out of the frame relay UNI). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlComBurstSize | 1.3.6.1.4.1.1751.2.18.24.3.1.16 | ||
| The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC in the ingress direction (into the frame relay UNI). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlExcessBurstSize | 1.3.6.1.4.1.1751.2.18.24.3.1.17 | ||
| The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC in the ingress direction (into the frame relay UNI). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlCommitedInfoRate | 1.3.6.1.4.1.1751.2.18.24.3.1.18 | ||
| The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC in the ingress direction (into the frame relay UNI). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlTimeInterval | 1.3.6.1.4.1.1751.2.18.24.3.1.19 | ||
| The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds. | |||
| OBJECT-TYPE | |||
| INTEGER | 64..4000 | ||
| viprSubChnlAtmPeakCellRate | 1.3.6.1.4.1.1751.2.18.24.3.1.20 | ||
| Peak cell rate, in cells per second, this will reflect the frame relay parameters in atm terms. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlAtmSustainedCellRate | 1.3.6.1.4.1.1751.2.18.24.3.1.21 | ||
| Sustained cell rate, in cells per second, this will reflect the frame relay parameters in atm terms. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlAtmMaxBurstSize | 1.3.6.1.4.1.1751.2.18.24.3.1.22 | ||
| Maximum burst size, in cells, this will reflect the frame relay parameters in atm terms. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlFrPeakCellRate | 1.3.6.1.4.1.1751.2.18.24.3.1.23 | ||
| Peak cell rate, in cells per second, this will reflect the frame relay parameters in atm terms. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlFrSustainedCellRate | 1.3.6.1.4.1.1751.2.18.24.3.1.24 | ||
| Sustained cell rate, in cells per second, this will reflect the frame relay parameters in atm terms. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlFrMaxBurstSize | 1.3.6.1.4.1.1751.2.18.24.3.1.25 | ||
| Maximum burst size, in cells, this will reflect the frame relay parameters in atm terms. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlFlowType | 1.3.6.1.4.1.1751.2.18.24.3.1.26 | ||
| The type of flow | |||
| OBJECT-TYPE | |||
| INTEGER | duplex(1) | ||
| viprSubChnlAdminStatus | 1.3.6.1.4.1.1751.2.18.24.3.1.27 | ||
| This variable represents the various X.731 states the Sub Channel state machine can take Administartively | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| viprSubChnlOperStatus | 1.3.6.1.4.1.1751.2.18.24.3.1.28 | ||
| This variable represents the various X.731 states the Sub Channel state machine can take Operationally | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2), unlocked-Init(3), unlocked-Disable(4), locked-Shutting(5) | ||
| viprSubChnlInitTmr | 1.3.6.1.4.1.1751.2.18.24.3.1.29 | ||
| This variable describes the waiting period in the locked-Init state before moving onto locked-Diable state. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlDisabWarnTmr | 1.3.6.1.4.1.1751.2.18.24.3.1.30 | ||
| This variable describes the periodicity in which the error messages are to be flashed when the system is in unlocked-Disable state. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlShutDwnWarnTmr | 1.3.6.1.4.1.1751.2.18.24.3.1.31 | ||
| This variable describes the periodicity in which the error messages are to be flashed when the system is in locked-Shutting state. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprSubChnlDisableWarning | 1.3.6.1.4.1.1751.2.18.24.3.1.32 | ||
| This variable when disabled will mask all the Disable warning messages. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| viprSubChnlDisableReason | 1.3.6.1.4.1.1751.2.18.24.3.1.33 | ||
| This variable describes the reason why the SubChnl in the unlocked-Disabled state. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), intfDisabled(2), routDisabled(3) | ||
| viprSubChnlRowStatus | 1.3.6.1.4.1.1751.2.18.24.3.1.34 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| viprSubChnlImIpAddr | 1.3.6.1.4.1.1751.2.18.24.3.1.35 | ||
| inband management IpAddr | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| viprSubChnlImMask | 1.3.6.1.4.1.1751.2.18.24.3.1.36 | ||
| inband management Mask | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| viprSubChnlViB | 1.3.6.1.4.1.1751.2.18.24.3.1.37 | ||
| The viB value of the connection | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4096 | ||
| viprSubChnlVUNIB | 1.3.6.1.4.1.1751.2.18.24.3.1.38 | ||
| The VUNIB value of the connection | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| viprSubChnlTrafficShaping | 1.3.6.1.4.1.1751.2.18.24.3.1.39 | ||
| Traffic Shaping Support in the A2B direction for outgoing ATM connections. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(1), enabled(2) | ||
| viprSubChnlAtmOamStatus | 1.3.6.1.4.1.1751.2.18.24.3.1.40 | ||
| Indicates the OAM monitoring status. The 3 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will respond to AIS/RDI. End-Seg-Pt: Connection endPoint that is also a segment endPoint. | |||
| OBJECT-TYPE | |||
| INTEGER | unsupp(1), end-Pt(2), end-Seg-Pt(3) | ||
| viprRouteConfigTable | 1.3.6.1.4.1.1751.2.18.24.4 | ||
| Table of Vipr static route Config Information | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ViprRouteConfigEntry | |||
| viprRouteConfigEntry | 1.3.6.1.4.1.1751.2.18.24.4.1 | ||
| Definition for Vipr static route attributes | |||
| OBJECT-TYPE | |||
| ViprRouteConfigEntry | |||
| viprRouteId | 1.3.6.1.4.1.1751.2.18.24.4.1.1 | ||
| The unique Id to the routing table entry | |||
| OBJECT-TYPE | |||
| Integer32 | 1..1024 | ||
| viprRouteIPAddress | 1.3.6.1.4.1.1751.2.18.24.4.1.2 | ||
| The IP address of the host/network in the route entry | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| viprRouteIPNetMask | 1.3.6.1.4.1.1751.2.18.24.4.1.3 | ||
| The IP Subnet Mask for the route entry to identify whether the route entry is a host or network | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| viprRouteDestAddress | 1.3.6.1.4.1.1751.2.18.24.4.1.4 | ||
| The IP address of the host/network in the route entry | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| viprRouteGatewayAddress | 1.3.6.1.4.1.1751.2.18.24.4.1.5 | ||
| The IP address of the Gateway | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| viprRouteServiceType | 1.3.6.1.4.1.1751.2.18.24.4.1.6 | ||
| The Service types that are supported | |||
| OBJECT-TYPE | |||
| INTEGER | gold(1), silver(2), bronze(3) | ||
| viprRouteMetric | 1.3.6.1.4.1.1751.2.18.24.4.1.7 | ||
| A scalar value for user-supplied static route metric values. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprRouteAdminStatus | 1.3.6.1.4.1.1751.2.18.24.4.1.8 | ||
| This variable represents the various X.731 states the Route state machine can take Administratively | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2) | ||
| viprRouteOperStatus | 1.3.6.1.4.1.1751.2.18.24.4.1.9 | ||
| This variable represents the various X.731 states the Route state machine can take Operationally | |||
| OBJECT-TYPE | |||
| INTEGER | outOfService(1), inService(2), unlocked-Init(3), unlocked-Disable(4), locked-Shutting(5) | ||
| viprRouteInitTmr | 1.3.6.1.4.1.1751.2.18.24.4.1.10 | ||
| This variable describes the waiting period in the locked-Init state before moving onto locked-Diable state. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprRouteDisabWarnTmr | 1.3.6.1.4.1.1751.2.18.24.4.1.11 | ||
| This variable describes the periodicity in which the error messages are to be flashed when the system is in unlocked-Disable state. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprRouteShutDwnWarnTmr | 1.3.6.1.4.1.1751.2.18.24.4.1.12 | ||
| This variable describes the periodicity in which the error messages are to be flashed when the system is in locked-Shutting state. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprRouteDisableWarning | 1.3.6.1.4.1.1751.2.18.24.4.1.13 | ||
| This variable when disabled will mask all the Disable warning messages. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| viprRouteDisableReason | 1.3.6.1.4.1.1751.2.18.24.4.1.14 | ||
| This variable describes the reason why the Route in the unlocked-Disabled state. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), intfDisabled(2), routDisabled(3) | ||
| viprRouteRowStatus | 1.3.6.1.4.1.1751.2.18.24.4.1.15 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| viprRouteDestMask | 1.3.6.1.4.1.1751.2.18.24.4.1.16 | ||
| The IP Mask of the host/network in the route entry | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| viprRoutingConfigTable | 1.3.6.1.4.1.1751.2.18.24.5 | ||
| Table of Vipr routes Config Information | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ViprRoutingConfigEntry | |||
| viprRoutingConfigEntry | 1.3.6.1.4.1.1751.2.18.24.5.1 | ||
| Definition for Vipr route attributes | |||
| OBJECT-TYPE | |||
| ViprRoutingConfigEntry | |||
| viprRoutingCommand | 1.3.6.1.4.1.1751.2.18.24.5.1.1 | ||
| The Routing table request command Set to start to initiate the caching of first 15 entries Set to more to initiate the caching of next 15 entries Set to abort to reset the counter in I/O card Set to retrieve in order to get the entries | |||
| OBJECT-TYPE | |||
| INTEGER | start(1), more(2), abort(3), retrieve(4) | ||
| viprRoutingIPAddress | 1.3.6.1.4.1.1751.2.18.24.5.1.2 | ||
| The IP address of the host/network in the route entry | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| viprRoutingIPNetMask | 1.3.6.1.4.1.1751.2.18.24.5.1.3 | ||
| The IP Subnet Mask for the route entry to identify whether the route entry is a host or network | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| viprRoutingDestAddress | 1.3.6.1.4.1.1751.2.18.24.5.1.4 | ||
| The IP address of the host/network in the route entry | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| viprRoutingGatewayAddress | 1.3.6.1.4.1.1751.2.18.24.5.1.5 | ||
| The IP address of the Gateway | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| viprRoutingServiceType | 1.3.6.1.4.1.1751.2.18.24.5.1.6 | ||
| The Service types that are supported | |||
| OBJECT-TYPE | |||
| INTEGER | gold(1), silver(2), bronze(3) | ||
| viprRoutingType | 1.3.6.1.4.1.1751.2.18.24.5.1.7 | ||
| Route types supported by the RS Card. | |||
| OBJECT-TYPE | |||
| INTEGER | stat(1), rip(2), ospf(3), intf(4) | ||
| viprRoutingMetric | 1.3.6.1.4.1.1751.2.18.24.5.1.8 | ||
| The Path cost | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprRoutingDestMask | 1.3.6.1.4.1.1751.2.18.24.5.1.9 | ||
| The IP address Mask of the host/network in the route entry | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| viprRoutingAge | 1.3.6.1.4.1.1751.2.18.24.5.1.10 | ||
| Age of the routing entry | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprRoutingIndex | 1.3.6.1.4.1.1751.2.18.24.5.1.11 | ||
| Index to the routing entry | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprArpConfigTable | 1.3.6.1.4.1.1751.2.18.24.6 | ||
| Table of Vipr Arp Table Information | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ViprArpConfigEntry | |||
| viprArpConfigEntry | 1.3.6.1.4.1.1751.2.18.24.6.1 | ||
| Definition for Vipr Arp Table attributes | |||
| OBJECT-TYPE | |||
| ViprArpConfigEntry | |||
| viprArpCommand | 1.3.6.1.4.1.1751.2.18.24.6.1.1 | ||
| The ARP table request command Set to start to initiate the caching of first 15 entries Set to more to initiate the caching of next 15 entries Set to abort to reset the counter in I/O card Set to retrieve in order to get the entries | |||
| OBJECT-TYPE | |||
| INTEGER | start(1), more(2), abort(3), retrieve(4) | ||
| viprArpIPAddress | 1.3.6.1.4.1.1751.2.18.24.6.1.2 | ||
| The IP address of the host/network | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| viprArpHwAddress | 1.3.6.1.4.1.1751.2.18.24.6.1.3 | ||
| The hardware address of the host/network | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(6) | ||
| viprArpEntryAge | 1.3.6.1.4.1.1751.2.18.24.6.1.4 | ||
| Age of cache entry. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprArpInterfaceIPAddress | 1.3.6.1.4.1.1751.2.18.24.6.1.5 | ||
| The Interface IP address through which it is learned | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| viprArpInterfaceIPMask | 1.3.6.1.4.1.1751.2.18.24.6.1.6 | ||
| The Interface IP address Mask | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| viprArpInterfaceServiceType | 1.3.6.1.4.1.1751.2.18.24.6.1.7 | ||
| The Service type of the interface through which the ARP table is learned | |||
| OBJECT-TYPE | |||
| INTEGER | gold(1), silver(2), bronze(3) | ||
| viprArpIndex | 1.3.6.1.4.1.1751.2.18.24.6.1.8 | ||
| The Index to the Arp table | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| viprPingConfigTable | 1.3.6.1.4.1.1751.2.18.24.7 | ||
| Table of Vipr Ping Table Information | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ViprPingConfigEntry | |||
| viprPingConfigEntry | 1.3.6.1.4.1.1751.2.18.24.7.1 | ||
| Definition for Vipr Ping Table attributes | |||
| OBJECT-TYPE | |||
| ViprPingConfigEntry | |||
| ipAddr | 1.3.6.1.4.1.1751.2.18.24.7.1.1 | ||
| The IP address of the host/network to be echoed | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| pingStatus | 1.3.6.1.4.1.1751.2.18.24.7.1.2 | ||
| The response value - Alive/Not Alive | |||
| OBJECT-TYPE | |||
| INTEGER | alive(1), not-Alive(2) | ||
| viprRipConfigTable | 1.3.6.1.4.1.1751.2.18.24.8 | ||
| Table of Vipr Rip Update Interval for each card | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ViprRipConfigEntry | |||
| viprRipConfigEntry | 1.3.6.1.4.1.1751.2.18.24.8.1 | ||
| Definition of Rip Update attributes | |||
| OBJECT-TYPE | |||
| ViprRipConfigEntry | |||
| viprRipUpdateInt | 1.3.6.1.4.1.1751.2.18.24.8.1.1 | ||
| This variable represents the Rip Update Interval used by the RIP protocol to transmit packets. The unit is in seconds. The default is 30 seconds and user can change it to 8 or 16 seconds for a route server card. The value will apply to all VPN's in a route server card. But different route server cards in different slots can have separate values for Rip Update Interval | |||
| OBJECT-TYPE | |||
| INTEGER | lowUpdateInt(8), mediumUpdateInt(16), normalUpdateInt(30) | ||
| toneAnnceControl | 1.3.6.1.4.1.1751.2.18.25 | ||
| OBJECT IDENTIFIER | |||
| tasCmprsAnnceId | 1.3.6.1.4.1.1751.2.18.25.31 | ||
| Announcement ID for this announcement file to be compressed. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..100 | ||
| tasCmprsAnnceReplaceId | 1.3.6.1.4.1.1751.2.18.25.32 | ||
| Announcement ID of the announcement file to be replaced from the announcement table by this file. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..100 | ||
| tasCmprsAnnceFilename | 1.3.6.1.4.1.1751.2.18.25.33 | ||
| File name for this announcement which is to be compressed. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(79) | ||
| tasCmprsAnnceDescription | 1.3.6.1.4.1.1751.2.18.25.34 | ||
| Description for this announcement which is to to be compressed. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(255) | ||
| tasCmprsAnnceCmprsType | 1.3.6.1.4.1.1751.2.18.25.35 | ||
| The type of compression used for storing this announcement. | |||
| OBJECT-TYPE | |||
| INTEGER | uncompressed(1), compress8k(2), compress16k(3), compress32k(4) | ||
| tasCmprsAnnceType | 1.3.6.1.4.1.1751.2.18.25.36 | ||
| The type of this announcement. | |||
| OBJECT-TYPE | |||
| INTEGER | voice(1), toneVoice(2), userTones(3), music(4), musicVoice(5), toneMusic(6) | ||
| tasCmprsAnnceIntfIndex | 1.3.6.1.4.1.1751.2.18.25.37 | ||
| Interface index in SSPPCCC format of TASM card on which this announcement is to be compressed. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| tasCmprsAction | 1.3.6.1.4.1.1751.2.18.25.38 | ||
| Action to be performed on this announcement. | |||
| OBJECT-TYPE | |||
| INTEGER | compress(1), delete(2), store(3) | ||
| tasTstAnnceId | 1.3.6.1.4.1.1751.2.18.25.39 | ||
| Announcement ID to be played for testing. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..100 | ||
| tasTstAnnceIntfIndex | 1.3.6.1.4.1.1751.2.18.25.40 | ||
| Interface index in SSPPCCC format of CE card on which this announcement is to be played for testing. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| tasTstAnnceLawType | 1.3.6.1.4.1.1751.2.18.25.41 | ||
| The type of CE card towards which this announcement is to be played. A-Law is for E1 and U-Law is for DS1 | |||
| OBJECT-TYPE | |||
| INTEGER | a-Law(1), u-Law(2) | ||
| tasTstAnnceAction | 1.3.6.1.4.1.1751.2.18.25.42 | ||
| Action to be performed on this announcement for testing. | |||
| OBJECT-TYPE | |||
| INTEGER | playStart(1), playStop(2), playAbort(3) | ||
| tasTstLineId | 1.3.6.1.4.1.1751.2.18.25.43 | ||
| Test ID to be started for line testing. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| tasTstLineIntfIndex | 1.3.6.1.4.1.1751.2.18.25.44 | ||
| Interface index in SSPPCCC format of CE card on which this test is to be initiated. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| tasTstLineAction | 1.3.6.1.4.1.1751.2.18.25.45 | ||
| Test action to be performed. | |||
| OBJECT-TYPE | |||
| INTEGER | tstStart(1), tstStop(2), tstAbort(3) | ||
| tasMemIntfIndex | 1.3.6.1.4.1.1751.2.18.25.46 | ||
| Interface index in SSPPCCC format of TASM card on which the memory is to be initialised. | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| tasMemAction | 1.3.6.1.4.1.1751.2.18.25.47 | ||
| Test action to be performed. | |||
| OBJECT-TYPE | |||
| INTEGER | re-initialize(1) | ||
| toneAnnceIpAddress | 1.3.6.1.4.1.1751.2.18.25.48 | ||
| IP Address for announcement ftp server. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| toneAnnceAccountName | 1.3.6.1.4.1.1751.2.18.25.49 | ||
| ftp account name for access to announcement ftp server. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(20) | ||
| toneAnnceAccountPassword | 1.3.6.1.4.1.1751.2.18.25.50 | ||
| ftp account password for access to announcement ftp server. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(20) | ||
| toneAnnceSourceFile | 1.3.6.1.4.1.1751.2.18.25.51 | ||
| announcement file with complete path on the ftp server | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(79) | ||
| toneAnnceDestinationFile | 1.3.6.1.4.1.1751.2.18.25.52 | ||
| The announcementSourceFile will be renamed with MS DOS file format and placed in the /scsi/announce directory on the disk. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(12) | ||
| toneAnnceFtpStatus | 1.3.6.1.4.1.1751.2.18.25.53 | ||
| Current status of the ftp announcement download. Status of the software announcement. noActivity is the initial start state from boot-up. working is set while ftp'ing the announcement. The final state is one of doneSuccessfully, doneWithError, or aborted, all self-explanatory. It will stay in this state until re-boot or starting an announcement. If the state is doneWithError then announcementSwErrorStatus will be set to reflect the type of error. | |||
| OBJECT-TYPE | |||
| INTEGER | noActivity(1), working(2), doneSuccessfully(3), doneWithError(4), aborted(5) | ||
| toneAnnceFtpErrorStatus | 1.3.6.1.4.1.1751.2.18.25.54 | ||
| The result of the finish of the ftp software announcement download. Set to a value 3-21 if announcementSwCopyStatus is doneWithError. Set to none if announcementFtpCopyStatus is doneSuccessfully. Set to userAbort if announcementSwCopyStatus is aborted. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), userAbort(2), invalidIpAddress(3), invalidAccountName(4), invalidAccountPassword(5), invalidSourceFile(6), invalidDstFileNameFormat(7), dstFileNameAlreadyExist(8), tooManyAnnouncementNow(9), diskSpaceUsageExceed(10), unableToOpenFile(11), unableToMakeFtpConnection(12), unableToWriteFile(13), unableToCompleteFtp(14), unableToSpawnTask(15), unableToOpenScsiAnncDir(16), statFails(17) | ||
| toneAnnceFtpAction | 1.3.6.1.4.1.1751.2.18.25.55 | ||
| start ftp announcement files. When announcementFtpCopyStatus is working, the start request will be ignored. Abort will have effect only when announcementFtpCopystatus is working. | |||
| OBJECT-TYPE | |||
| INTEGER | start(1), abort(2) | ||
| gr303Config | 1.3.6.1.4.1.1751.2.18.26 | ||
| OBJECT IDENTIFIER | |||
| gr303IgConfig | 1.3.6.1.4.1.1751.2.18.26.1 | ||
| OBJECT IDENTIFIER | |||
| gr303IgConfigTable | 1.3.6.1.4.1.1751.2.18.26.1.1 | ||
| Table of GR303 group configuration | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Gr303IgConfigEntry | |||
| gr303IgConfigEntry | 1.3.6.1.4.1.1751.2.18.26.1.1.1 | ||
| Row definition for GR303 group configuration | |||
| OBJECT-TYPE | |||
| Gr303IgConfigEntry | |||
| gr303IgId | 1.3.6.1.4.1.1751.2.18.26.1.1.1.1 | ||
| This is used as an index into GR303IG table which recognizes GR303 Interface Group | |||
| OBJECT-TYPE | |||
| INTEGER | 1..84 | ||
| gr303IgRowStatus | 1.3.6.1.4.1.1751.2.18.26.1.1.1.2 | ||
| GR303IG config entry row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| gr303IgAdminStatus | 1.3.6.1.4.1.1751.2.18.26.1.1.1.3 | ||
| Administrative status of the GR303IG | |||
| OBJECT-TYPE | |||
| INTEGER | inService(1), outOfService(2) | ||
| gr303IgPrimaryTMCChanIntfId | 1.3.6.1.4.1.1751.2.18.26.1.1.1.4 | ||
| Primary TMC channel Interface Id in SSPPCCC format | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| gr303IgPrimaryEOCChanIntfId | 1.3.6.1.4.1.1751.2.18.26.1.1.1.5 | ||
| Primary EOC channel Interface Id in SSPPCCC format | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| gr303IgBackupTMCChanIntfId | 1.3.6.1.4.1.1751.2.18.26.1.1.1.6 | ||
| Backup TMC channel Interface Id in SSPPCCC format | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| gr303IgBackupEOCChanIntfId | 1.3.6.1.4.1.1751.2.18.26.1.1.1.7 | ||
| Backup EOC channel Interface Id in SSPPCCC format | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| gr303IgPrimaryTMCStatus | 1.3.6.1.4.1.1751.2.18.26.1.1.1.8 | ||
| Primary TMC channel Status | |||
| OBJECT-TYPE | |||
| INTEGER | standby-OutOfService(1), standby-InService(2), active-OutOfService(3), active-InService(4) | ||
| gr303IgPrimaryEOCStatus | 1.3.6.1.4.1.1751.2.18.26.1.1.1.9 | ||
| Primary EOC channel Status | |||
| OBJECT-TYPE | |||
| INTEGER | standby-OutOfService(1), standby-InService(2), active-OutOfService(3), active-InService(4) | ||
| gr303IgBackupTMCStatus | 1.3.6.1.4.1.1751.2.18.26.1.1.1.10 | ||
| Backup TMC channel Status.Value null(5) Indicates that the Backup TMC has not been configured. | |||
| OBJECT-TYPE | |||
| INTEGER | standby-OutOfService(1), standby-InService(2), active-OutOfService(3), active-InService(4), null(5) | ||
| gr303IgBackupEOCStatus | 1.3.6.1.4.1.1751.2.18.26.1.1.1.11 | ||
| Backup EOC channel Status.Value null(5) Indicates that the Backup EOC has not been configured. | |||
| OBJECT-TYPE | |||
| INTEGER | standby-OutOfService(1), standby-InService(2), active-OutOfService(3), active-InService(4), null(5) | ||
| gr303IgTMCProtSwitchProvState | 1.3.6.1.4.1.1751.2.18.26.1.1.1.12 | ||
| Lock/Unlock the protection switch | |||
| OBJECT-TYPE | |||
| INTEGER | pps-inhibit(1), pps-enable(2) | ||
| gr303IgEOCProtSwitchProvState | 1.3.6.1.4.1.1751.2.18.26.1.1.1.13 | ||
| Lock/Unlock the protection switch | |||
| OBJECT-TYPE | |||
| INTEGER | pps-inhibit(1), pps-enable(2) | ||
| gr303IgTMCProtSwitchCommand | 1.3.6.1.4.1.1751.2.18.26.1.1.1.14 | ||
| User command to do path protection switch | |||
| OBJECT-TYPE | |||
| INTEGER | noAction(1), normalSwitchToBackup(2), normalSwitchToPrimary(3), forcedSwitchToBackup(4), forcedSwitchToPrimary(5) | ||
| gr303IgEOCProtSwitchCommand | 1.3.6.1.4.1.1751.2.18.26.1.1.1.15 | ||
| User command to do path protection switch | |||
| OBJECT-TYPE | |||
| INTEGER | noAction(1), normalSwitchToBackup(2), normalSwitchToPrimary(3), forcedSwitchToBackup(4), forcedSwitchToPrimary(5) | ||
| gr303IgLocalDigitalSwitchType | 1.3.6.1.4.1.1751.2.18.26.1.1.1.16 | ||
| LDS (IDT) type | |||
| OBJECT-TYPE | |||
| INTEGER | lucent-5ess(1), nortel-dms(2) | ||
| gr303IgLocalDigitalSwitchVersion | 1.3.6.1.4.1.1751.2.18.26.1.1.1.17 | ||
| LDS (IDT)Version | |||
| OBJECT-TYPE | |||
| INTEGER | lucent-5ess-version-1(1), nortel-dms-version-1(2) | ||
| gr303IgIntfConfigTable | 1.3.6.1.4.1.1751.2.18.26.1.2 | ||
| Table of interface attributes in an GR303IG | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Gr303IgIntfConfigEntry | |||
| gr303IgIntfConfigEntry | 1.3.6.1.4.1.1751.2.18.26.1.2.1 | ||
| Row definition for GR303 Access Arrangement Interface configuration | |||
| OBJECT-TYPE | |||
| Gr303IgIntfConfigEntry | |||
| gr303IntfIgId | 1.3.6.1.4.1.1751.2.18.26.1.2.1.1 | ||
| This is used as an index into GR303Ig table which recognizes GR303 Interface Group. This is used as a first index into this interface table. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..84 | ||
| gr303IgIntfId | 1.3.6.1.4.1.1751.2.18.26.1.2.1.2 | ||
| This is used as an index into IG interface table which recognizes GR303 Ig interfaces. This is used as a second index into this table | |||
| OBJECT-TYPE | |||
| INTEGER | 1..28 | ||
| gr303IgIntfPhysId | 1.3.6.1.4.1.1751.2.18.26.1.2.1.3 | ||
| Interface's Physical ID (SSPPCCC) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| gr303IgIntfNetId | 1.3.6.1.4.1.1751.2.18.26.1.2.1.4 | ||
| gr303Ig Interface (DS1) Net Id assigned by the network | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| gr303IgIntfRowStatus | 1.3.6.1.4.1.1751.2.18.26.1.2.1.5 | ||
| GR303IG interface entry row status - row status can not be made active until all the values are set | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| gr303LapdConfigTable | 1.3.6.1.4.1.1751.2.18.26.1.4 | ||
| Table of LAPD attributes in an GR303IG | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Gr303LapdConfigEntry | |||
| gr303LapdConfigEntry | 1.3.6.1.4.1.1751.2.18.26.1.4.1 | ||
| Row definition for LAPD attributes in a GR303IG | |||
| OBJECT-TYPE | |||
| Gr303LapdConfigEntry | |||
| gr303LapdIgId | 1.3.6.1.4.1.1751.2.18.26.1.4.1.1 | ||
| GR303IG Number index which recognizes GR303 Interface group | |||
| OBJECT-TYPE | |||
| INTEGER | 1..84 | ||
| gr303T200 | 1.3.6.1.4.1.1751.2.18.26.1.4.1.2 | ||
| value of Lapd T200 timer in miliseconds in step size of 50 ms | |||
| OBJECT-TYPE | |||
| INTEGER | 100..350 | ||
| gr303T203 | 1.3.6.1.4.1.1751.2.18.26.1.4.1.3 | ||
| value of Lapd T203 timer in seconds | |||
| OBJECT-TYPE | |||
| INTEGER | 10..300 | ||
| gr303N200 | 1.3.6.1.4.1.1751.2.18.26.1.4.1.4 | ||
| Maximum number of retransmissions | |||
| OBJECT-TYPE | |||
| INTEGER | 1..10 | ||
| gr303K | 1.3.6.1.4.1.1751.2.18.26.1.4.1.5 | ||
| Maximum number of outstanding I frames - Lapd - window size. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..7 | ||
| gr303TMCConfigTable | 1.3.6.1.4.1.1751.2.18.26.1.5 | ||
| Table of Layer 3 attributes in an GR303IG | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Gr303TMCConfigEntry | |||
| gr303TMCConfigEntry | 1.3.6.1.4.1.1751.2.18.26.1.5.1 | ||
| Row definition for GR303 Access Arrangement Layer3 parameters configuration | |||
| OBJECT-TYPE | |||
| Gr303TMCConfigEntry | |||
| gr303TMCIgId | 1.3.6.1.4.1.1751.2.18.26.1.5.1.1 | ||
| GR303IG Number index which recognizes GR303 Interface group | |||
| OBJECT-TYPE | |||
| INTEGER | 1..84 | ||
| gr303TMCT303 | 1.3.6.1.4.1.1751.2.18.26.1.5.1.2 | ||
| value of TMC T303 timer in miliseconds with a step size of 500 ms | |||
| OBJECT-TYPE | |||
| INTEGER | 700..4700 | ||
| gr303TMCT396 | 1.3.6.1.4.1.1751.2.18.26.1.5.1.3 | ||
| value of TMC T396 timer in miliseconds with a step size of 1000 ms | |||
| OBJECT-TYPE | |||
| INTEGER | 700..14700 | ||
| gr303Stats | 1.3.6.1.4.1.1751.2.18.27 | ||
| OBJECT IDENTIFIER | |||
| gr303IgStats | 1.3.6.1.4.1.1751.2.18.27.1 | ||
| OBJECT IDENTIFIER | |||
| gr303IgStatsTable | 1.3.6.1.4.1.1751.2.18.27.1.1 | ||
| Table of GR303 GR303IG based stats attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Gr303IgStatsEntry | |||
| gr303IgStatsEntry | 1.3.6.1.4.1.1751.2.18.27.1.1.1 | ||
| Row definition for GR303 GR303IG based stats | |||
| OBJECT-TYPE | |||
| Gr303IgStatsEntry | |||
| gr303IgStatsIgId | 1.3.6.1.4.1.1751.2.18.27.1.1.1.1 | ||
| This is used as an index into GR303 Ig table which recognizes GR303 Interface Group Interface group | |||
| OBJECT-TYPE | |||
| INTEGER | 1..84 | ||
| gr303IgStatsCurrentInCalls | 1.3.6.1.4.1.1751.2.18.27.1.1.1.2 | ||
| Total number of Currently established incoming calls | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| gr303IgStatsCurrentOutCalls | 1.3.6.1.4.1.1751.2.18.27.1.1.1.3 | ||
| Total number of Currently established outgoing calls | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| gr303IgStatsOutCallSuccessful | 1.3.6.1.4.1.1751.2.18.27.1.1.1.4 | ||
| Total number successful outgoing calls | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| gr303IgStatsOutCallFailed | 1.3.6.1.4.1.1751.2.18.27.1.1.1.5 | ||
| Total number of Failed outgoing calls | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| gr303IgStatsInCallSuccessful | 1.3.6.1.4.1.1751.2.18.27.1.1.1.6 | ||
| Total number successful incoming calls | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| gr303IgStatsInCallFailed | 1.3.6.1.4.1.1751.2.18.27.1.1.1.7 | ||
| Total number of Failed incoming calls | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| gr303IgStatsReset | 1.3.6.1.4.1.1751.2.18.27.1.1.1.8 | ||
| gr303Ig reset statistics button | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1) | ||
| atmTrunkingMIBObjects | 1.3.6.1.4.1.1751.2.18.28 | ||
| OBJECT IDENTIFIER | |||
| atmTrunkingIWFBaseGroup | 1.3.6.1.4.1.1751.2.18.28.1 | ||
| OBJECT IDENTIFIER | |||
| atmTrunkingIWFIdentifier | 1.3.6.1.4.1.1751.2.18.28.1.1 | ||
| IWF ID for the local endpoint | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingIWFLocalAddress | 1.3.6.1.4.1.1751.2.18.28.1.2 | ||
| IWF ATM address for the local endpoint | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(20) | ||
| atmTrunkingIWFMaxRemoteIWF | 1.3.6.1.4.1.1751.2.18.28.1.3 | ||
| Maximum remote IWF that can connect to this endpoint | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingIWFAdminStatus | 1.3.6.1.4.1.1751.2.18.28.1.4 | ||
| Indicates whether the Local IWF is active or not | |||
| OBJECT-TYPE | |||
| INTEGER | up(1), down(2), delete(3) | ||
| atmTrunkingRemoteIWFTable | 1.3.6.1.4.1.1751.2.18.28.2 | ||
| Remote IWF table | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmTrunkingRemoteIWFEntry | |||
| atmTrunkingRemoteIWFEntry | 1.3.6.1.4.1.1751.2.18.28.2.1 | ||
| Entry in atmTrunkingRemoteIWFTable | |||
| OBJECT-TYPE | |||
| AtmTrunkingRemoteIWFEntry | |||
| atmTrunkingRemoteIWFIdentifier | 1.3.6.1.4.1.1751.2.18.28.2.1.1 | ||
| IWF ID for the remote IWF | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingRemoteIWFAddress | 1.3.6.1.4.1.1751.2.18.28.2.1.2 | ||
| IWF ATM address for the remote IWF | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(20) | ||
| atmTrunkingRemoteIWFTrnkMode | 1.3.6.1.4.1.1751.2.18.28.2.1.3 | ||
| Maximum remote IWF that can connect to this endpoint | |||
| OBJECT-TYPE | |||
| INTEGER | switched(1), non-switched(2) | ||
| atmTrunkingRemoteIWFAdminStatus | 1.3.6.1.4.1.1751.2.18.28.2.1.4 | ||
| Indicates whether the Local IWF is active or not | |||
| OBJECT-TYPE | |||
| INTEGER | up(1), down(2) | ||
| atmTrunkingRemoteIWFRowStatus | 1.3.6.1.4.1.1751.2.18.28.2.1.5 | ||
| Maximum remote IWF that can connect to this endpoint | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| atmTrunkingSigVccTable | 1.3.6.1.4.1.1751.2.18.28.3 | ||
| Table of iwf signaling vcc configuration entities | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmTrunkingSigVccEntry | |||
| atmTrunkingSigVccEntry | 1.3.6.1.4.1.1751.2.18.28.3.1 | ||
| Entry in atmTrunkingSigVccTable | |||
| OBJECT-TYPE | |||
| AtmTrunkingSigVccEntry | |||
| atmTrunkingSigVccRmtIWFIdentifier | 1.3.6.1.4.1.1751.2.18.28.3.1.1 | ||
| IWF ID for the remote IWF | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingSigVccIdentifier | 1.3.6.1.4.1.1751.2.18.28.3.1.2 | ||
| Vcc ID assigned by the owner of this signaling Vcc | |||
| OBJECT-TYPE | |||
| INTEGER | 0..16383 | ||
| atmTrunkingSigVccOutgoingIfIndex | 1.3.6.1.4.1.1751.2.18.28.3.1.3 | ||
| Intf index of the outgoing interface,readonly for SVC/SPVC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmTrunkingSigVccOutgoingVpi | 1.3.6.1.4.1.1751.2.18.28.3.1.4 | ||
| VPI used at the outgoing interface, readonly for SVC/SPVC | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmTrunkingSigVccOutgoingVci | 1.3.6.1.4.1.1751.2.18.28.3.1.5 | ||
| VCI used at the outgoing interface, readonly for SVC/SPVC | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmTrunkingSigVccOwner | 1.3.6.1.4.1.1751.2.18.28.3.1.6 | ||
| Indicates who is the owner of the Sig VCC | |||
| OBJECT-TYPE | |||
| INTEGER | local(1), remote(2) | ||
| atmTrunkingSigVccInactiveTimer | 1.3.6.1.4.1.1751.2.18.28.3.1.7 | ||
| Inactive time period on which to clear the call | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingSigVccType | 1.3.6.1.4.1.1751.2.18.28.3.1.8 | ||
| Indicates if the SigVcc should be setup as PVC/SPVC/SVC | |||
| OBJECT-TYPE | |||
| INTEGER | pvc(1), spvc(2), svc(3) | ||
| atmTrunkingSigVccSignaling | 1.3.6.1.4.1.1751.2.18.28.3.1.9 | ||
| Indicates the signalling protocol used between the IWFs | |||
| OBJECT-TYPE | |||
| INTEGER | pss1(1), dss1(2), dpnss(3), other(4) | ||
| atmTrunkingSigVccFwPcr01 | 1.3.6.1.4.1.1751.2.18.28.3.1.10 | ||
| Forward PCR for the call | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingSigVccBwPcr01 | 1.3.6.1.4.1.1751.2.18.28.3.1.11 | ||
| Backward PCR for the call | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingSigVccFwScr01 | 1.3.6.1.4.1.1751.2.18.28.3.1.12 | ||
| Forward SCR for the call | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingSigVccBwScr01 | 1.3.6.1.4.1.1751.2.18.28.3.1.13 | ||
| Backward SCR for the call | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingSigVccFwMbs01 | 1.3.6.1.4.1.1751.2.18.28.3.1.14 | ||
| Forward MBS for the call | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingSigVccBwMbs01 | 1.3.6.1.4.1.1751.2.18.28.3.1.15 | ||
| Backward MBS for the call | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingSigVccMaxAal2Vcc | 1.3.6.1.4.1.1751.2.18.28.3.1.16 | ||
| Maximum number of bearer VCCs controlled by this SigVcc | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingSigVccActiveAal2Vcc | 1.3.6.1.4.1.1751.2.18.28.3.1.17 | ||
| Number of active bearer VCCs controlled by this SigVcc | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingSigVccOperStatus | 1.3.6.1.4.1.1751.2.18.28.3.1.18 | ||
| Indicates whether the Local IWF is active or not | |||
| OBJECT-TYPE | |||
| INTEGER | idle(1), outOfService(2), init(3), connecting(4), active(5), release(6) | ||
| atmTrunkingSigVccRowStatus | 1.3.6.1.4.1.1751.2.18.28.3.1.19 | ||
| Row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| atmTrunkingSigVccViB | 1.3.6.1.4.1.1751.2.18.28.3.1.20 | ||
| VI to associate the Egress part of A2B connection | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| atmTrunkingSigVccVUNIB | 1.3.6.1.4.1.1751.2.18.28.3.1.21 | ||
| VUNI associated the Egress part of A2B connection | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmTrunkingSigVccRetryTimer | 1.3.6.1.4.1.1751.2.18.28.3.1.22 | ||
| the time(seconds) to wait before attempting to establish the ATM Trunking Signalling VCC SPVC after previous failed call attempt. 0 indicates retries will be attempted immedi ately | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingSigVccRetryLimit | 1.3.6.1.4.1.1751.2.18.28.3.1.23 | ||
| ATM Trunking Signalling VCC SPVC Retry Limit. 0 indicates unlimited | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingSigVccRestart | 1.3.6.1.4.1.1751.2.18.28.3.1.24 | ||
| The active ATM Trunking SPVC is released, if necessary, and a new setup procedure is begun if restart, otherwise, noop. | |||
| OBJECT-TYPE | |||
| INTEGER | restart(1), noop(2) | ||
| atmTrunkingSigVccPriority | 1.3.6.1.4.1.1751.2.18.28.3.1.25 | ||
| Priority of TrunkingSigVcc - priority-1 being highest priority . | |||
| OBJECT-TYPE | |||
| INTEGER | priority-1(1), priority-2(2), priority-3(3), priority-4(4) | ||
| atmTrunkingSigVccRetryCounter | 1.3.6.1.4.1.1751.2.18.28.3.1.26 | ||
| Indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the SigVcc SPVC is restarted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingBrVccConfigTable | 1.3.6.1.4.1.1751.2.18.28.4 | ||
| Table of iwf aal2 bearer vcci configuration entities | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmTrunkingBrVccConfigEntry | |||
| atmTrunkingBrVccConfigEntry | 1.3.6.1.4.1.1751.2.18.28.4.1 | ||
| Row definition for iwf aal2 vcci configuration | |||
| OBJECT-TYPE | |||
| AtmTrunkingBrVccConfigEntry | |||
| atmTrunkingBrVccRmtIWFId | 1.3.6.1.4.1.1751.2.18.28.4.1.1 | ||
| IWF ID for the remote IWF | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingBrVccSigVccId | 1.3.6.1.4.1.1751.2.18.28.4.1.2 | ||
| Signalling Vcc associated with this Br Vcc | |||
| OBJECT-TYPE | |||
| INTEGER | 0..16383 | ||
| atmTrunkingBrVccId | 1.3.6.1.4.1.1751.2.18.28.4.1.3 | ||
| Id of the AAL2 Bear Vcc | |||
| OBJECT-TYPE | |||
| INTEGER | 1..4096 | ||
| atmTrunkingBrVccIf | 1.3.6.1.4.1.1751.2.18.28.4.1.4 | ||
| Intf index of the outgoing interface, readonly for SVC/SPVC | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| atmTrunkingBrVccVpi | 1.3.6.1.4.1.1751.2.18.28.4.1.5 | ||
| VPI value of this VCC connection. Valid range is a number between 0 and 4095. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4095 | ||
| atmTrunkingBrVccVci | 1.3.6.1.4.1.1751.2.18.28.4.1.6 | ||
| VCI value of this VCC connection. Valid range is a number between 0 and 65535. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| atmTrunkingBrVccViB | 1.3.6.1.4.1.1751.2.18.28.4.1.7 | ||
| VI to associate the Egress part of A2B connection | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1024 | ||
| atmTrunkingBrVccVUNIB | 1.3.6.1.4.1.1751.2.18.28.4.1.8 | ||
| VUNI associated the Egress part of A2B connection | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| atmTrunkingBrVccServiceType | 1.3.6.1.4.1.1751.2.18.28.4.1.9 | ||
| service type | |||
| OBJECT-TYPE | |||
| INTEGER | cbr-1(1), cbr-2(2), cbr-3(3), cbr-4(4), ubr(5), vbr-nrt2(6), vbr-nrt1(7), vbr-rt2(8), vbr-rt1(9), vbr-express(10) | ||
| atmTrunkingBrVccSarType | 1.3.6.1.4.1.1751.2.18.28.4.1.10 | ||
| sar type | |||
| OBJECT-TYPE | |||
| INTEGER | aal1(1), aal2(2) | ||
| atmTrunkingBrVccOwner | 1.3.6.1.4.1.1751.2.18.28.4.1.11 | ||
| The owner of this Vcc | |||
| OBJECT-TYPE | |||
| INTEGER | local(1), remote(2) | ||
| atmTrunkingBrVccOperStatus | 1.3.6.1.4.1.1751.2.18.28.4.1.12 | ||
| The Operational Status of this Bearer Vcc | |||
| OBJECT-TYPE | |||
| INTEGER | idle(1), outOfService(2), init(3), active(4), release(5) | ||
| atmTrunkingBrVccFwAtmPcr01 | 1.3.6.1.4.1.1751.2.18.28.4.1.13 | ||
| Forward pcr (0+1) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingBrVccBwAtmPcr01 | 1.3.6.1.4.1.1751.2.18.28.4.1.14 | ||
| Backward pcr (0+1) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingBrVccFwAtmScr01 | 1.3.6.1.4.1.1751.2.18.28.4.1.15 | ||
| Forward scr (0+1) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingBrVccBwAtmScr01 | 1.3.6.1.4.1.1751.2.18.28.4.1.16 | ||
| Backward scr (0+1) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingBrVccFwAtmMbs01 | 1.3.6.1.4.1.1751.2.18.28.4.1.17 | ||
| Forward Mbs (0+1) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingBrVccBwAtmMbs01 | 1.3.6.1.4.1.1751.2.18.28.4.1.18 | ||
| Backward Mbs (0+1) | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingBrVccConnType | 1.3.6.1.4.1.1751.2.18.28.4.1.19 | ||
| connection type | |||
| OBJECT-TYPE | |||
| INTEGER | svc(1), spvc(2), pvc(3) | ||
| atmTrunkingBrVccActiveChanCnt | 1.3.6.1.4.1.1751.2.18.28.4.1.20 | ||
| Number of currently active channels in this Vcc | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingBrVccMaxAal2ChanId | 1.3.6.1.4.1.1751.2.18.28.4.1.21 | ||
| Max Id of channels supported within this br vcc | |||
| OBJECT-TYPE | |||
| INTEGER | 9..255 | ||
| atmTrunkingBrVccCircuitModeDataSupp | 1.3.6.1.4.1.1751.2.18.28.4.1.22 | ||
| Circuit mode data | |||
| OBJECT-TYPE | |||
| INTEGER | disable(1), enable(2) | ||
| atmTrunkingBrVccFrameModeSupp | 1.3.6.1.4.1.1751.2.18.28.4.1.23 | ||
| Frame mode data | |||
| OBJECT-TYPE | |||
| INTEGER | disable(1), enable(2) | ||
| atmTrunkingBrVccFaxModSupp | 1.3.6.1.4.1.1751.2.18.28.4.1.24 | ||
| FAX Demodulation | |||
| OBJECT-TYPE | |||
| INTEGER | disable(1), enable(2) | ||
| atmTrunkingBrVccCASPktXportSupp | 1.3.6.1.4.1.1751.2.18.28.4.1.25 | ||
| Channel Associated Signaling | |||
| OBJECT-TYPE | |||
| INTEGER | disable(1), enable(2) | ||
| atmTrunkingBrVccDTMFPktXportSupp | 1.3.6.1.4.1.1751.2.18.28.4.1.26 | ||
| DTMF Dialed Digits | |||
| OBJECT-TYPE | |||
| INTEGER | disable(1), enable(2) | ||
| atmTrunkingBrVccMFR1PktXportSupp | 1.3.6.1.4.1.1751.2.18.28.4.1.27 | ||
| MF-R1 Dialed Digits | |||
| OBJECT-TYPE | |||
| INTEGER | disable(1), enable(2) | ||
| atmTrunkingBrVccMFR2PktXportSupp | 1.3.6.1.4.1.1751.2.18.28.4.1.28 | ||
| MF-R2 Dialed Digits | |||
| OBJECT-TYPE | |||
| INTEGER | disable(1), enable(2) | ||
| atmTrunkingBrVccPCMEncoding | 1.3.6.1.4.1.1751.2.18.28.4.1.29 | ||
| DTMF Dialed Digits | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), a-law(2), u-law(3) | ||
| atmTrunkingBrVccMaxFrameLength | 1.3.6.1.4.1.1751.2.18.28.4.1.30 | ||
| Maximum length of frame mode data | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| atmTrunkingBrVccIdleChannSuprSupp | 1.3.6.1.4.1.1751.2.18.28.4.1.31 | ||
| Idle Channel Supression | |||
| OBJECT-TYPE | |||
| INTEGER | disable(1), enable(2) | ||
| atmTrunkingBrVccSilenceDetSupp | 1.3.6.1.4.1.1751.2.18.28.4.1.32 | ||
| Silence Detection | |||
| OBJECT-TYPE | |||
| INTEGER | disable(1), enable(2) | ||
| atmTrunkingBrVccCompressionSpec | 1.3.6.1.4.1.1751.2.18.28.4.1.33 | ||
| Compression Type | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), g726-16K(2), g726-24K(3), g726-32K(4), g726-40K(5), g729a-8K(6) | ||
| atmTrunkingBrVccAudioProfileSource | 1.3.6.1.4.1.1751.2.18.28.4.1.34 | ||
| Profile Source | |||
| OBJECT-TYPE | |||
| INTEGER | itu-t(1), other(2) | ||
| atmTrunkingBrVccAudioProfileId | 1.3.6.1.4.1.1751.2.18.28.4.1.35 | ||
| Profile ID | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| atmTrunkingBrVccAvailBw | 1.3.6.1.4.1.1751.2.18.28.4.1.36 | ||
| Available Bandwidth left in this Vcc | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingBrVccRowStatus | 1.3.6.1.4.1.1751.2.18.28.4.1.37 | ||
| Row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| atmTrunkingBrVccGr303Supp | 1.3.6.1.4.1.1751.2.18.28.4.1.38 | ||
| GR303 Support | |||
| OBJECT-TYPE | |||
| INTEGER | disable(1), enable(2) | ||
| atmTrunkingBrVccOamStatus | 1.3.6.1.4.1.1751.2.18.28.4.1.39 | ||
| Indicates the OAM monitoring status of side A. The 2 possible states are: Unsupp: No monitoring enabled. End-Pt: Atm side is only an end point, therefore it will respond to AIS/RDI. | |||
| OBJECT-TYPE | |||
| INTEGER | unsupp(1), end-Pt(2) | ||
| atmTrunkingBrVccInactiveTimer | 1.3.6.1.4.1.1751.2.18.28.4.1.40 | ||
| The time(in seconds) to wait before releasing the ATM Trunking Bearer VCC SVC after all narrow band calls are dropped | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingBrVccRetryTimer | 1.3.6.1.4.1.1751.2.18.28.4.1.41 | ||
| the time(seconds) to wait before attempting to establish the ATM Trunking Bearer VCC SPVC after previous failed call attempt. 0 indicates retries will be attempted immediately | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingBrVccRetryLimit | 1.3.6.1.4.1.1751.2.18.28.4.1.42 | ||
| ATM Trunking Bearer VCC SPVC Retry Limit. 0 indicates unlimited | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingBrVccRestart | 1.3.6.1.4.1.1751.2.18.28.4.1.43 | ||
| The active ATM Trunking BrVcc SPVC is released, if necessary, and a new setup procedure is begun if 'restart', otherwise, noop. | |||
| OBJECT-TYPE | |||
| INTEGER | restart(1), noop(2) | ||
| atmTrunkingBrVccCuTimer | 1.3.6.1.4.1.1751.2.18.28.4.1.44 | ||
| CuTimer represents combined use timer, is set to zero such that every ATM cell transmitted contains one, and only one, AAL2 packet, and the first octet of the AAL2 packet header follows immediately after the Start Field in the ATM cell payload. If the AAL2 packet payload is less than 44 octets, the remainder of the ATM cell payload following the end of the AAL2 packet shall be filled with zeros as padding. Each increment of CuTimer means 5ms more to wait. And cuTimer default value 4 means to wait 20ms before the ATM cell is sent out. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..8 | ||
| atmTrunkingBrVccPriority | 1.3.6.1.4.1.1751.2.18.28.4.1.45 | ||
| Priority of TrunkingBrVcc - priority-1 being highest priority . | |||
| OBJECT-TYPE | |||
| INTEGER | priority-1(1), priority-2(2), priority-3(3), priority-4(4) | ||
| atmTrunkingBrVccRetryCounter | 1.3.6.1.4.1.1751.2.18.28.4.1.46 | ||
| Indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the BrVcc SPVC is restarted. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingDataChannelConfigTable | 1.3.6.1.4.1.1751.2.18.28.5 | ||
| Table of iwf aal2 data channel configuration entities | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AtmTrunkingDataChannelConfigEntry | |||
| atmTrunkingDataChannelConfigEntry | 1.3.6.1.4.1.1751.2.18.28.5.1 | ||
| Row definition for iwf aal2 data channel configuration | |||
| OBJECT-TYPE | |||
| AtmTrunkingDataChannelConfigEntry | |||
| atmTrunkingDataChannelRmtIWFId | 1.3.6.1.4.1.1751.2.18.28.5.1.1 | ||
| IWF ID for the remote IWF | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| atmTrunkingDataChannelSigVccId | 1.3.6.1.4.1.1751.2.18.28.5.1.2 | ||
| Vcc ID assigned by the owner of this signaling Vcc | |||
| OBJECT-TYPE | |||
| INTEGER | 0..16383 | ||
| atmTrunkingDataChannelBrVccId | 1.3.6.1.4.1.1751.2.18.28.5.1.3 | ||
| Id of the AAL2 Bear Vcc | |||
| OBJECT-TYPE | |||
| INTEGER | 1..4096 | ||
| atmTrunkingDataChannelId | 1.3.6.1.4.1.1751.2.18.28.5.1.4 | ||
| The AAL2 Channel Id of this channel | |||
| OBJECT-TYPE | |||
| INTEGER | 8..255 | ||
| atmTrunkingDataChanOperStatus | 1.3.6.1.4.1.1751.2.18.28.5.1.5 | ||
| Operational Status of this channel | |||
| OBJECT-TYPE | |||
| INTEGER | idle(1), active(2) | ||
| atmTrunkingDataChanOwner | 1.3.6.1.4.1.1751.2.18.28.5.1.6 | ||
| The owner of this channel | |||
| OBJECT-TYPE | |||
| INTEGER | local(1), remote(2) | ||
| atmTrunkingDataChanNBIntf | 1.3.6.1.4.1.1751.2.18.28.5.1.7 | ||
| The index of narrowband interface this channel is mapped to | |||
| OBJECT-TYPE | |||
| IntfIndex | |||
| protectionGroup | 1.3.6.1.4.1.1751.2.18.29 | ||
| OBJECT IDENTIFIER | |||
| protectionGroupTable | 1.3.6.1.4.1.1751.2.18.29.1 | ||
| Table of interface protection group attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ProtectionGroupEntry | |||
| protectionGroupEntry | 1.3.6.1.4.1.1751.2.18.29.1.1 | ||
| Defines one interface protection group | |||
| OBJECT-TYPE | |||
| ProtectionGroupEntry | |||
| pgtGroupId | 1.3.6.1.4.1.1751.2.18.29.1.1.1 | ||
| a user selected logical number representing a protection group uniquely within a PSAX | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| pgtSwitchoverMethod | 1.3.6.1.4.1.1751.2.18.29.1.1.2 | ||
| switchover method to switch traffic from failed primary interface to available standby interface. In auto method, PSAX automatically switches the traffic without user intervention. In manual method, a failed primary does not switch traffic and gives control to user to do so. | |||
| OBJECT-TYPE | |||
| INTEGER | auto(1), manual(2) | ||
| pgtSwitchbackMethod | 1.3.6.1.4.1.1751.2.18.29.1.1.3 | ||
| switchback method to switch traffic from a standby to its corresponding recovered primary interface. In auto method, PSAX automatically switches the traffic without user intervention. In manual method, standby does not switch traffic and gives control to user to do so. | |||
| OBJECT-TYPE | |||
| INTEGER | auto(1), manual(2) | ||
| pgtStandbySelection | 1.3.6.1.4.1.1751.2.18.29.1.1.4 | ||
| Standby selection method determines the order of selection of standby when primary interface fails. The options are: sequential -- internally select next higher available standby to the last one, latest_used -- used last one freed, oldest_used -- used to longest idle one, random randomly select one, explicit -- selected by user. | |||
| OBJECT-TYPE | |||
| INTEGER | sequential(1), latest-used(2), oldest-used(3), random(4), explicit(5) | ||
| pgtRowStatus | 1.3.6.1.4.1.1751.2.18.29.1.1.5 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| interfaceProtectionTable | 1.3.6.1.4.1.1751.2.18.29.2 | ||
| Table of interface protection attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| InterfaceProtectionEntry | |||
| interfaceProtectionEntry | 1.3.6.1.4.1.1751.2.18.29.2.1 | ||
| Defines attributes for interface protection | |||
| OBJECT-TYPE | |||
| InterfaceProtectionEntry | |||
| iptGroupId | 1.3.6.1.4.1.1751.2.18.29.2.1.1 | ||
| a user selected logical number representing a protection group uniquely within a PSAX. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| iptLogicalIntfId | 1.3.6.1.4.1.1751.2.18.29.2.1.2 | ||
| Logical interface number assigned by user | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| iptPhysicalIntfId | 1.3.6.1.4.1.1751.2.18.29.2.1.3 | ||
| physical interface in SSPPCCC format | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| iptIntfType | 1.3.6.1.4.1.1751.2.18.29.2.1.4 | ||
| interface primary or secondary. | |||
| OBJECT-TYPE | |||
| INTEGER | primary(1), secondary(2) | ||
| iptOperState | 1.3.6.1.4.1.1751.2.18.29.2.1.5 | ||
| indicates operational state of the interface. | |||
| OBJECT-TYPE | |||
| INTEGER | inactive(1), active(2) | ||
| iptOperatingIntf | 1.3.6.1.4.1.1751.2.18.29.2.1.6 | ||
| protection operational state of the interface. Indicates which logical interface is carrying traffic originally configured for this interface. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| iptProtCommand | 1.3.6.1.4.1.1751.2.18.29.2.1.7 | ||
| protection operational state of the interface. Indicates which logical interface is carrying traffic originally configured for this interface. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), switchover(2), switchback(3) | ||
| iptSelectedStandby | 1.3.6.1.4.1.1751.2.18.29.2.1.8 | ||
| Standby interface logical number on which to switch traffic. Used only in case of manual switchover with explicit standby selection. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| iptRowStatus | 1.3.6.1.4.1.1751.2.18.29.2.1.9 | ||
| row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| h248Config | 1.3.6.1.4.1.1751.2.18.30 | ||
| OBJECT IDENTIFIER | |||
| h248TermIdTable | 1.3.6.1.4.1.1751.2.18.30.1 | ||
| Table of H.248 Terminations | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| H248TermIdEntry | |||
| h248TermIdEntry | 1.3.6.1.4.1.1751.2.18.30.1.1 | ||
| Row definition for H.248 Termination ID table | |||
| OBJECT-TYPE | |||
| H248TermIdEntry | |||
| h248TermSlotId | 1.3.6.1.4.1.1751.2.18.30.1.1.1 | ||
| Slot # for termination | |||
| OBJECT-TYPE | |||
| INTEGER | 1..99 | ||
| h248TermPhyPortId | 1.3.6.1.4.1.1751.2.18.30.1.1.2 | ||
| Physical Port # for termination | |||
| OBJECT-TYPE | |||
| INTEGER | 0..999 | ||
| h248TermLogPortId | 1.3.6.1.4.1.1751.2.18.30.1.1.3 | ||
| Logical Port # for termination | |||
| OBJECT-TYPE | |||
| INTEGER | 0..999 | ||
| h248TermChanId | 1.3.6.1.4.1.1751.2.18.30.1.1.4 | ||
| Chan # for termination | |||
| OBJECT-TYPE | |||
| INTEGER | 0..999 | ||
| h248TermVpi | 1.3.6.1.4.1.1751.2.18.30.1.1.5 | ||
| VPI # for termination. Value 0 is reserved to indicate N/A, e.g., TDM termination. Thus, VPI = h248TermVpi - 1, for h248TermVpi > 0. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4096 | ||
| h248TermVci | 1.3.6.1.4.1.1751.2.18.30.1.1.6 | ||
| VCI # for termination. Value 0 is reserved to indicate N/A, e.g., TDM termination. Thus, VCI = h248TermVci - 1, for h248TermVci > 0. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65536 | ||
| h248TermId | 1.3.6.1.4.1.1751.2.18.30.1.1.7 | ||
| Termination ID is provisioned by user and used for identifying termination between MGC and MG | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(32) | ||
| h248TermAal2Cid | 1.3.6.1.4.1.1751.2.18.30.1.1.8 | ||
| AAL2 CID | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| h248TermActivation | 1.3.6.1.4.1.1751.2.18.30.1.1.9 | ||
| Activation for termination ID | |||
| OBJECT-TYPE | |||
| INTEGER | disable(1), enable(2) | ||
| h248TermRowStatus | 1.3.6.1.4.1.1751.2.18.30.1.1.10 | ||
| h248TermIdEntry row status | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| h248SysControl | 1.3.6.1.4.1.1751.2.18.31 | ||
| OBJECT IDENTIFIER | |||
| h248MaxNumberOfContexts | 1.3.6.1.4.1.1751.2.18.31.1 | ||
| The value of the property gives the maximum number of contexts that can exist at anytime. The NULL context is not included in this number. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| h248MaxTerminationsPerContext | 1.3.6.1.4.1.1751.2.18.31.2 | ||
| The max number of terminations allowed in a context. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| h248NormalMGExecutionTime | 1.3.6.1.4.1.1751.2.18.31.3 | ||
| Settable by the MGC to indicate the interval within which the MGC expects a response to any transaction from the MG (exclusive of the network delay). Value represents milliseconds. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| h248NormalMGCExecutionTime | 1.3.6.1.4.1.1751.2.18.31.4 | ||
| Settable by the MGC to indicate the interval within which the MG expects a response to any transaction from the MG (exclusive of the network delay). Value represents milliseconds. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| h248MGProvisionalResponseTimerValue | 1.3.6.1.4.1.1751.2.18.31.5 | ||
| Indicates the time within which the MGC should expect a Pending Response from the MG if a Transaction can not be completed. Initially set to h248NormalMGExecutionTime, plus network delay, but maybe lowered. Value represents milliseconds. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| h248MGCProvisionalResponseTimerValue | 1.3.6.1.4.1.1751.2.18.31.6 | ||
| Indicates the time within which the MG should expect a Pending Response from the MGC if a Transaction can not be completed. Initially set to h248NormalMGCExecutionTime, plus network delay, but maybe lowered. Value represents milliseconds. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| h248MGCIpAddress1 | 1.3.6.1.4.1.1751.2.18.31.7 | ||
| The IP address of the 1st MGC. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| h248MGCIpAddress2 | 1.3.6.1.4.1.1751.2.18.31.8 | ||
| The IP address of the 2nd MGC. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| IntfIndex | |||
| A INTEGER | |||
| TEXTUAL-CONVENTION | |||
| Integer32 | |||
| ConnFailureCause | |||
| General connection failure cause | |||
| TEXTUAL-CONVENTION | |||
| INTEGER | none(1), physical(2) | ||
| FrConnFailureCause | |||
| Frame Relay connection failure cause | |||
| TEXTUAL-CONVENTION | |||
| INTEGER | none(1), physical(2), lmi(3), dlci(4) | ||
| AtmConnFailureCause | |||
| ATM connection failure cause | |||
| TEXTUAL-CONVENTION | |||
| INTEGER | none(1), physical(2), oamAis(3), oamRdi(4) | ||
| ImaGrpChannelEndState | |||
| The current operational state of the Near-end or far-end IM A Group State Machine. | |||
| TEXTUAL-CONVENTION | |||
| INTEGER | notConfigured(1), startUp(2), startUpAck(3), cfgAbtUnsupportedM(4), cfgAbtIncSymmetry(5), cfgAbtOther(6), insufficientLinks(7), blocked(8), operational(9) | ||
| TasAnnceEntry | |||
| SEQUENCE | |||
| INTEGER as tasAnnceId | |||
| INTEGER as tasAnnceType | |||
| INTEGER as tasAnnceCmprsType | |||
| INTEGER as tasAnnceValid | |||
| DisplayString as tasAnnceDescription | |||
| TasToneConfigEntry | |||
| SEQUENCE | |||
| INTEGER as tasToneId | |||
| INTEGER as tasToneType | |||
| INTEGER as tasToneFirstFreq | |||
| INTEGER as tasToneSecondFreq | |||
| INTEGER as tasToneThirdFreq | |||
| INTEGER as tasToneOnTime | |||
| INTEGER as tasToneOffTime | |||
| INTEGER as tasToneLevel | |||
| FeatureEntry | |||
| SEQUENCE | |||
| INTEGER as featureId | |||
| Integer32 as featureStaticMem | |||
| INTEGER as featureDesiredStatus | |||
| INTEGER as featureCurrentStatus | |||
| DspResourceEntry | |||
| SEQUENCE | |||
| INTEGER as dspResourceId | |||
| Integer32 as dspResourceAvail | |||
| Integer32 as dspResourceUsed | |||
| Integer32 as dspResourceUsedFailed | |||
| Integer32 as dspResourceAvailFailed | |||
| TrapActivationEntry | |||
| SEQUENCE | |||
| INTEGER as trapGroupId | |||
| Integer32 as trapIndex | |||
| INTEGER as trapActivationStatus | |||
| DisplayString as trapNames | |||
| INTEGER as resetAction | |||
| CardEntry | |||
| SEQUENCE | |||
| INTEGER as cardSlot | |||
| INTEGER as cardType | |||
| INTEGER as cardProtectionStatus | |||
| INTEGER as cardOperStatus | |||
| INTEGER as cardAdminStatus | |||
| INTEGER as cardAlarmStatus | |||
| DisplayString as cardCleiCode | |||
| Integer32 as cardRevision | |||
| DisplayString as cardSerialNumber | |||
| INTEGER as cardOperatingMode | |||
| INTEGER as protectionConfigMode | |||
| INTEGER as protectionStatus | |||
| INTEGER as protectionSlot | |||
| TaxiPortConfigEntry | |||
| SEQUENCE | |||
| Integer32 as taxiPortId | |||
| INTEGER as taxiPortType | |||
| INTEGER as taxiLineStatus | |||
| INTEGER as taxiOutputTransferRate | |||
| Ds3PortConfigEntry | |||
| SEQUENCE | |||
| Integer32 as ds3PortId | |||
| INTEGER as ds3LineType | |||
| INTEGER as ds3LineCoding | |||
| INTEGER as ds3LoopbackConfig | |||
| INTEGER as ds3TransmitClockSource | |||
| INTEGER as ds3LineStatus | |||
| INTEGER as ds3LineBuildOut | |||
| INTEGER as ds3LineScramble | |||
| INTEGER as ds3CellMapping | |||
| INTEGER as ds3SendCode | |||
| INTEGER as ds3OutputTxRate | |||
| MsPortConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as msPortId | |||
| INTEGER as msLineCoding | |||
| INTEGER as msBaudRate | |||
| INTEGER as msProtocol | |||
| INTEGER as msEquipmentType | |||
| INTEGER as msRs232XmitMode | |||
| INTEGER as msRs232Parity | |||
| INTEGER as msRs232DataBits | |||
| INTEGER as msRs232StopBits | |||
| INTEGER as msTxDataClkSrcForDte | |||
| INTEGER as msTxDataClkSrcForDce | |||
| INTEGER as msRxDataClkSrcForDce | |||
| INTEGER as msRxClkPolarity | |||
| INTEGER as msTxClkPolarity | |||
| INTEGER as msKgResync | |||
| INTEGER as msHandshake | |||
| INTEGER as msSpeedAdaption | |||
| INTEGER as msBitStuffing | |||
| INTEGER as msLineStatus | |||
| INTEGER as msRxDataPolarity | |||
| INTEGER as msTxDataPolarity | |||
| INTEGER as msLoopbackConfig | |||
| INTEGER as msLOSDetection | |||
| Ds1PortConfigEntry | |||
| SEQUENCE | |||
| Integer32 as ds1PortId | |||
| INTEGER as ds1Channelization | |||
| INTEGER as ds1LineType | |||
| INTEGER as ds1LineCoding | |||
| INTEGER as ds1LoopbackConfig | |||
| INTEGER as ds1TransmitClockSource | |||
| INTEGER as ds1LineBuildOut | |||
| INTEGER as ds1LineStatus | |||
| INTEGER as ds1EnhanceFeatureSet1 | |||
| INTEGER as ds1DataTransferType | |||
| INTEGER as ds1OamInterworkingType | |||
| INTEGER as ds1ConnGatewayFeature | |||
| INTEGER as ds1InLineCode | |||
| Oc3PortConfigEntry | |||
| SEQUENCE | |||
| Integer32 as oc3PortId | |||
| INTEGER as oc3LoopbackConfig | |||
| INTEGER as oc3TransmitClockSource | |||
| INTEGER as oc3LineStatus | |||
| INTEGER as oc3OutputTransferRate | |||
| INTEGER as oc3APSConfiguration | |||
| Oc3APSPairConfigEntry | |||
| SEQUENCE | |||
| Integer32 as oc3APSPairId | |||
| INTEGER as oc3APSPairMode | |||
| INTEGER as oc3APSPairOption | |||
| INTEGER as oc3APSPairWorkingSFBERThreshold | |||
| INTEGER as oc3APSPairProtectionSFBERThreshold | |||
| INTEGER as oc3APSPairWorkingSDBERThreshold | |||
| INTEGER as oc3APSPairProtectionSDBERThreshold | |||
| INTEGER as oc3APSPairWTRPeriod | |||
| Integer32 as oc3APSWorkingSlot | |||
| Integer32 as oc3APSProtectionSlot | |||
| Integer32 as oc3APSActiveSlot | |||
| INTEGER as oc3APSPairStatus | |||
| INTEGER as oc3APSPairUserCommand | |||
| INTEGER as oc3APSPairCurrentState | |||
| INTEGER as oc3APSPairWorkingLineSignalStatus | |||
| INTEGER as oc3APSPairProtectionLineSignalStatus | |||
| Oc3APSPairStatsEntry | |||
| SEQUENCE | |||
| Integer32 as oc3APSPairStatsId | |||
| Integer32 as oc3APSPairWorkingSFDuration | |||
| Integer32 as oc3APSPairWorkingSDDuration | |||
| Integer32 as oc3APSPairProtectionSFDuration | |||
| Integer32 as oc3APSPairProtectionSDDuration | |||
| OCTET STRING as oc3APSPairTransmitK1K2Bytes | |||
| OCTET STRING as oc3APSPairReceiveK1K2Bytes | |||
| Integer32 as oc3APSPairSwitchOverCount | |||
| TwoWireSourcePortConfigEntry | |||
| SEQUENCE | |||
| Integer32 as twoWireSourcePortId | |||
| INTEGER as twoWireSourceLoopDetection | |||
| INTEGER as twoWireSourceDialMode | |||
| INTEGER as twoWireSourceLoopBackConfig | |||
| INTEGER as twoWireSourceLineStatus | |||
| INTEGER as twoWireSourceSignalingBits | |||
| INTEGER as twoWireSourceRingCadence | |||
| INTEGER as twoWireSourceSignalingState | |||
| INTEGER as twoWireSourceTestMode | |||
| HighSpeedPortConfigEntry | |||
| SEQUENCE | |||
| Integer32 as highSpeedPortId | |||
| Integer32 as highSpeedPortInputRate | |||
| Integer32 as highSpeedPortOutputRate | |||
| DspPortConfigEntry | |||
| SEQUENCE | |||
| Integer32 as dspPortId | |||
| TwoWireSinkPortConfigEntry | |||
| SEQUENCE | |||
| Integer32 as twoWireSinkPortId | |||
| INTEGER as twoWireSinkLoopDetection | |||
| INTEGER as twoWireSinkDialMode | |||
| INTEGER as twoWireSinkLineStatus | |||
| INTEGER as twoWireSinkSignalingBits | |||
| INTEGER as twoWireSinkSignalingState | |||
| INTEGER as twoWireSinkTestMode | |||
| E3PortConfigEntry | |||
| SEQUENCE | |||
| Integer32 as e3PortId | |||
| INTEGER as e3LineType | |||
| INTEGER as e3LineCoding | |||
| INTEGER as e3LoopbackConfig | |||
| INTEGER as e3TransmitClockSource | |||
| INTEGER as e3LineStatus | |||
| INTEGER as e3LineBuildOut | |||
| INTEGER as e3LineScramble | |||
| INTEGER as e3CellMapping | |||
| E1PortConfigEntry | |||
| SEQUENCE | |||
| Integer32 as e1PortId | |||
| INTEGER as e1Channelization | |||
| INTEGER as e1LineType | |||
| INTEGER as e1LineCoding | |||
| INTEGER as e1LoopbackConfig | |||
| INTEGER as e1TransmitClockSource | |||
| INTEGER as e1LineNationalBits | |||
| INTEGER as e1LineStatus | |||
| INTEGER as e1TS16 | |||
| INTEGER as e1DataTransferType | |||
| INTEGER as e1CRC4 | |||
| INTEGER as e1OamInterworkingType | |||
| INTEGER as e1EnhanceFeatureSet1 | |||
| INTEGER as e1ConnGatewayFeature | |||
| EthernetPortConfigEntry | |||
| SEQUENCE | |||
| Integer32 as ethernetPortId | |||
| INTEGER as ethernetLinkType | |||
| OCTET STRING as ethernetPhysicalAddr | |||
| INTEGER as ethernetLineStatus | |||
| INTEGER as ethernetDuplexMode | |||
| Dsp2PortConfigEntry | |||
| SEQUENCE | |||
| Integer32 as dsp2PortId | |||
| ImaPortConfigEntry | |||
| SEQUENCE | |||
| Integer32 as imaPortId | |||
| Sts1PortConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as sts1PortId | |||
| INTEGER as sts1LineCoding | |||
| INTEGER as sts1LoopbackConfig | |||
| INTEGER as sts1TransmitClockSource | |||
| INTEGER as sts1LineBuildOut | |||
| INTEGER as sts1LineStatus | |||
| INTEGER as sts1StsPointers | |||
| INTEGER as sts1VtPointers | |||
| TasmPortConfigEntry | |||
| SEQUENCE | |||
| Integer32 as tasmPortId | |||
| ProtectionGroupConfigEntry | |||
| SEQUENCE | |||
| INTEGER as protectionSlotId | |||
| INTEGER as workingSlotBitmap | |||
| INTEGER as protectionCommand | |||
| INTEGER as protectionCommandSlotId | |||
| INTEGER as protectionGroupStatus | |||
| INTEGER as workingSlotId | |||
| INTEGER as workingFailedBitmap | |||
| Integer32 as protectionActiveCounter | |||
| Integer32 as protectionOOSCounter | |||
| TaxiChannelConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as taxiChannelId | |||
| INTEGER as taxiChannelIfType | |||
| INTEGER as taxiChannelSecuFeature | |||
| Ds3ChannelConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as ds3ChannelId | |||
| INTEGER as ds3ChannelIfType | |||
| INTEGER as ds3ChannelSecuFeature | |||
| Ds1ChannelConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as ds1ChannelId | |||
| INTEGER as ds1ChannelIfType | |||
| OCTET STRING as ds1ChannelDs0Map | |||
| INTEGER as ds1ChannelCellMapping | |||
| INTEGER as ds1ChannelInputCodingRule | |||
| INTEGER as ds1ChannelSecuFeature | |||
| INTEGER as ds1ChannelSignaling | |||
| INTEGER as ds1ChannelCellScramble | |||
| MsChannelConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as msChannelId | |||
| INTEGER as msChannelIfType | |||
| INTEGER as msChannelCellBearingMode | |||
| INTEGER as msChannelCellBearingAddrMode | |||
| INTEGER as msChannelCellBearingPayloadFec | |||
| INTEGER as msChannelSecuFeature | |||
| Oc3ChannelConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as oc3ChannelId | |||
| INTEGER as oc3ChannelIfType | |||
| INTEGER as oc3ChannelSecuFeature | |||
| TwoWireSourceChannelConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as twoWireSourceChannelId | |||
| INTEGER as twoWireSourceChannelIfType | |||
| INTEGER as twoWireSourceChannelConnectionType | |||
| INTEGER as twoWireSourceChannelCompandingLaw | |||
| INTEGER as twoWireSourceChannelSecuFeature | |||
| INTEGER as twoWireSourceChannelVoiceCompression | |||
| INTEGER as twoWireSourceChannelEchoCancellation | |||
| INTEGER as twoWireSourceChannelSilenceSupression | |||
| INTEGER as twoWireSourceChannelEncapsulationAal | |||
| INTEGER as twoWireSourceChannelSubscriberService | |||
| HighSpeedChannelConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as highSpeedChannelId | |||
| INTEGER as highSpeedChannelIfType | |||
| DspChannelConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as dspChannelId | |||
| INTEGER as dspChannelIfType | |||
| INTEGER as dspChannelInputCodingRule | |||
| INTEGER as dspChannelVoiceCompression | |||
| INTEGER as dspChannelEchoCancellation | |||
| INTEGER as dspChannelSilenceSupression | |||
| TwoWireSinkChannelConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as twoWireSinkChannelId | |||
| INTEGER as twoWireSinkChannelIfType | |||
| INTEGER as twoWireSinkChannelConnectionType | |||
| INTEGER as twoWireSinkChannelCompandingLaw | |||
| INTEGER as twoWireSinkChannelVoiceCompression | |||
| INTEGER as twoWireSinkChannelEchoCancellation | |||
| INTEGER as twoWireSinkChannelSilenceSupression | |||
| INTEGER as twoWireSinkChannelEncapsulationAal | |||
| INTEGER as twoWireSinkChannelSubscriberService | |||
| E3ChannelConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as e3ChannelId | |||
| INTEGER as e3ChannelIfType | |||
| INTEGER as e3ChannelSecuFeature | |||
| E1ChannelConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as e1ChannelId | |||
| INTEGER as e1ChannelIfType | |||
| OCTET STRING as e1ChannelDs0Map | |||
| INTEGER as e1ChannelCellMapping | |||
| INTEGER as e1ChannelInputCodingRule | |||
| INTEGER as e1ChannelSecuFeature | |||
| INTEGER as e1ChannelSignaling | |||
| EthernetChannelConfigEntry | |||
| SEQUENCE | |||
| Integer32 as ethernetChannelId | |||
| INTEGER as ethernetChannelIfType | |||
| Dsp2ChannelConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as dsp2ChannelId | |||
| INTEGER as dsp2ChannelIfType | |||
| INTEGER as dsp2ChannelAlarmType | |||
| INTEGER as dsp2ChannelModeConfig | |||
| Dsp2AlgorithmEntry | |||
| SEQUENCE | |||
| IntfIndex as dsp2AlgorithmId | |||
| INTEGER as dsp2AlgorithmType | |||
| ImaGrpChannelConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as imaGrpChannelId | |||
| INTEGER as imaGrpChannelIfType | |||
| Integer32 as imaGrpChannelPortMap | |||
| ImaGrpChannelEndState as imaGrpChannelNeState | |||
| ImaGrpChannelEndState as imaGrpChannelFeState | |||
| INTEGER as imaGrpChannelFailureStatus | |||
| INTEGER as imaGrpChannelSymmetry | |||
| INTEGER as imaGrpChannelMinNumTxLinks | |||
| INTEGER as imaGrpChannelMinNumRxLinks | |||
| INTEGER as imaGrpChannelNeTxClkMode | |||
| INTEGER as imaGrpChannelFeTxClkMode | |||
| INTEGER as imaGrpChannelTxImaId | |||
| INTEGER as imaGrpChannelRxImaId | |||
| INTEGER as imaGrpChannelTxFrameLength | |||
| INTEGER as imaGrpChannelRxFrameLength | |||
| Integer32 as imaGrpChannelDiffLinkDelayMax | |||
| IntfIndex as imaGrpChannelLeastDelayLink | |||
| Integer32 as imaGrpChannelDiffDelayMaxObs | |||
| INTEGER as imaGrpChannelAlphaValue | |||
| INTEGER as imaGrpChannelBetaValue | |||
| INTEGER as imaGrpChannelGammaValue | |||
| Integer32 as imaGrpChannelStatsNeNumFailures | |||
| Integer32 as imaGrpChannelStatsFeNumFailures | |||
| Integer32 as imaGrpChannelStatsNumTxActLnks | |||
| Integer32 as imaGrpChannelStatsNumRxActLnks | |||
| Integer32 as imaGrpChannelStatsTimer | |||
| INTEGER as imaGrpChannelCompatMode | |||
| TasmChannelConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as tasmChannelId | |||
| INTEGER as tasmChannelIfType | |||
| INTEGER as tasmChannelAlarmType | |||
| INTEGER as tasmChannelModeConfig | |||
| AtmUniConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as atmUniIfIndex | |||
| INTEGER as atmUniAddrType | |||
| INTEGER as atmUniSvcMinVpi | |||
| INTEGER as atmUniSvcMaxVpi | |||
| INTEGER as atmUniSvcMinVci | |||
| INTEGER as atmUniSvcMaxVci | |||
| INTEGER as atmUniAdminStatus | |||
| INTEGER as atmUniOperStatus | |||
| INTEGER as atmUniOverSubscription | |||
| OCTET STRING as atmUniNwPrefix1 | |||
| Integer32 as atmUniT303 | |||
| Integer32 as atmUniT308 | |||
| Integer32 as atmUniT309 | |||
| Integer32 as atmUniT310 | |||
| Integer32 as atmUniT313 | |||
| Integer32 as atmUniT316 | |||
| Integer32 as atmUniT317 | |||
| Integer32 as atmUniT322 | |||
| Integer32 as atmUniT398 | |||
| Integer32 as atmUniT399 | |||
| IpAddress as atmUniMyNeighborIpAddress | |||
| DisplayString as atmUniMyNeighborIfName | |||
| INTEGER as atmUniVpiSig | |||
| INTEGER as atmUniVciSig | |||
| INTEGER as atmUniVpiIlmi | |||
| INTEGER as atmUniVciIlmi | |||
| INTEGER as atmUniAtmSignalingStatus | |||
| DisplayString as atmUniMyIfName | |||
| INTEGER as atmUniIlmiProtocolStatus | |||
| INTEGER as atmUniIlmiOperStatus | |||
| INTEGER as atmUniIlmiConfigProc | |||
| INTEGER as atmUniIlmiConnectProc | |||
| INTEGER as atmUniIlmiAttachPtProc | |||
| INTEGER as atmUniIlmiSecureLinkProc | |||
| INTEGER as atmUniIlmiAddrRegProc | |||
| Integer32 as atmUniIlmiTimerS | |||
| Integer32 as atmUniIlmiTimerT | |||
| Integer32 as atmUniIlmiRetryK | |||
| INTEGER as atmUniIntfType | |||
| OCTET STRING as atmUniUserAddress | |||
| INTEGER as atmUniViSuppFlag | |||
| INTEGER as atmUniUPCSupp | |||
| INTEGER as atmUniUbrLoadBalSupp | |||
| Integer32 as atmUniAvailBwIgr | |||
| Integer32 as atmUniAvailBwEgr | |||
| INTEGER as atmUniVUNISuppFlag | |||
| INTEGER as atmUniUserAddrOrgScope | |||
| INTEGER as atmUniSscopRxWndSz | |||
| INTEGER as atmUniConnTrafficShapingFlag | |||
| AtmIispConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as atmIispIfIndex | |||
| INTEGER as atmIispSvcMinVpi | |||
| INTEGER as atmIispSvcMaxVpi | |||
| INTEGER as atmIispSvcMinVci | |||
| INTEGER as atmIispSvcMaxVci | |||
| INTEGER as atmIispAdminStatus | |||
| INTEGER as atmIispOperStatus | |||
| INTEGER as atmIispOverSubscription | |||
| Integer32 as atmIispT303 | |||
| Integer32 as atmIispT308 | |||
| Integer32 as atmIispT309 | |||
| Integer32 as atmIispT310 | |||
| Integer32 as atmIispT316 | |||
| Integer32 as atmIispT317 | |||
| Integer32 as atmIispT322 | |||
| Integer32 as atmIispT398 | |||
| Integer32 as atmIispT399 | |||
| INTEGER as atmIispAtmSignalingStatus | |||
| Integer32 as atmIispAvailBwIgr | |||
| Integer32 as atmIispAvailBwEgr | |||
| INTEGER as atmIispUPCSupp | |||
| INTEGER as atmIispUbrLoadBalSupp | |||
| INTEGER as atmIispSscopRxWndSz | |||
| INTEGER as atmIispConnTrafficShapingFlag | |||
| AtmCirEmConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as atmCirEmIfIndex | |||
| INTEGER as atmCirEmAdminStatus | |||
| INTEGER as atmCirEmOperStatus | |||
| INTEGER as atmCirEmCASIdleAbcdPattern | |||
| INTEGER as atmCirEmCASBusyAbcdPattern | |||
| INTEGER as atmCirEmAlarmDataPattern | |||
| INTEGER as atmCirEmTCPattern | |||
| INTEGER as atmCirEmDownStInterworking | |||
| AtmTermEmConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as atmTermEmIfIndex | |||
| INTEGER as atmTermEmRxTimeOut | |||
| INTEGER as atmTermEmAdminStatus | |||
| INTEGER as atmTermEmOperStatus | |||
| HdlcConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as hdlcIfIndex | |||
| INTEGER as hdlcAdminStatus | |||
| INTEGER as hdlcOperStatus | |||
| INTEGER as hdlcThroughPut | |||
| INTEGER as hdlcDataInversion | |||
| FrUniConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as frUniIfIndex | |||
| INTEGER as frUniAddrDlciLen | |||
| INTEGER as frUniDlcmiState | |||
| INTEGER as frUniAdminStatus | |||
| INTEGER as frUniOperStatus | |||
| INTEGER as frUniOverSubscription | |||
| INTEGER as frUniLmiProtocol | |||
| INTEGER as frUniInterworkingType | |||
| INTEGER as frUniN391 | |||
| INTEGER as frUniN392 | |||
| INTEGER as frUniN393 | |||
| INTEGER as frUniT391 | |||
| INTEGER as frUniT392 | |||
| INTEGER as frUniAsyncLmi | |||
| INTEGER as frLmiOperStatus | |||
| INTEGER as frUniNT3 | |||
| INTEGER as frUniThroughPut | |||
| DspConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as dspIfIndex | |||
| INTEGER as dspAdminStatus | |||
| INTEGER as dspOperStatus | |||
| BridgeConfigEntry | |||
| SEQUENCE | |||
| Integer32 as bridgeIfIndex | |||
| INTEGER as bridgeAdminStatus | |||
| INTEGER as bridgeOperStatus | |||
| INTEGER as bridgeNumber | |||
| INTEGER as bridgePortPriority | |||
| INTEGER as bridgePathCost | |||
| INTEGER as bridgeConnectionType | |||
| BridgeDomainEntry | |||
| SEQUENCE | |||
| Integer32 as bridgeDomainNumber | |||
| INTEGER as bridgeDomainAdminStatus | |||
| INTEGER as bridgeDomainOperStatus | |||
| INTEGER as bridgeDomainPriority | |||
| TimeTicks as bridgeDomainTimeSinceTopologyChange | |||
| OCTET STRING as bridgeDomainDesignatedRoot | |||
| Integer32 as bridgeDomainRootCost | |||
| Integer32 as bridgeDomainRootPort | |||
| Integer32 as bridgeDomainMaxMessageAge | |||
| Integer32 as bridgeDomainHelloTime | |||
| Integer32 as bridgeDomainHoldTime | |||
| Integer32 as bridgeDomainForwardDelay | |||
| INTEGER as bridgeDomainMaxBridgeAge | |||
| INTEGER as bridgeDomainBridgeHelloTime | |||
| INTEGER as bridgeDomainBridgeForwardDelay | |||
| INTEGER as bridgeDomainAgingTime | |||
| INTEGER as bridgeDomainSpanningTree | |||
| Integer32 as bridgeDomainTopologyChanges | |||
| Integer32 as bridgeDomainLearnedEntryDiscards | |||
| Integer32 as bridgeDomainTimer | |||
| IpAddress as bridgeDomainDefaultGateway | |||
| OCTET STRING as bridgeDomainPortStatusBitmap | |||
| RouterConfigEntry | |||
| SEQUENCE | |||
| Integer32 as routerIfIndex | |||
| INTEGER as routerAdminStatus | |||
| INTEGER as routerOperStatus | |||
| IpAddress as routerIpAddress | |||
| IpAddress as routerIpNetworkMask | |||
| INTEGER as routerNumber | |||
| IpAddress as routerEthernetIpAddress | |||
| IsdnIntfConfigEntry | |||
| SEQUENCE | |||
| Integer32 as isdnIntfId | |||
| Integer32 as isdnIntfDChanId | |||
| INTEGER as isdnIntfAdminStatus | |||
| INTEGER as isdnIntfOperStatus | |||
| INTEGER as isdnIntfSwitchType | |||
| IsdnL2ConfigEntry | |||
| SEQUENCE | |||
| INTEGER as isdnL2IntfId | |||
| INTEGER as isdnT200 | |||
| INTEGER as isdnT203 | |||
| INTEGER as isdnN200 | |||
| INTEGER as isdnN201 | |||
| INTEGER as isdnK | |||
| INTEGER as isdnL2OperStatus | |||
| INTEGER as isdnL2CurrentState | |||
| IsdnBChanConfigEntry | |||
| SEQUENCE | |||
| INTEGER as isdnBChanId | |||
| INTEGER as isdnBChanAdminStatus | |||
| INTEGER as isdnBChanOperStatus | |||
| AtmDbCirEmConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as atmDbCirEmIfIndex | |||
| INTEGER as atmDbCirEmAdminStatus | |||
| INTEGER as atmDbCirEmOperStatus | |||
| Integer32 as atmDbCirEmIdlePattern | |||
| INTEGER as atmDbCirEmServiceType | |||
| INTEGER as atmDbCirEmDbcesType | |||
| INTEGER as atmDbCirEmIntegrationTime | |||
| LmiDlciConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as lmiDlciIfIndex | |||
| Integer32 as lmiDlci | |||
| INTEGER as lmiDlciOperStatus | |||
| Integer32 as lmiDlciStatusTime | |||
| Dsp2ConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as dsp2IfIndex | |||
| INTEGER as dsp2AdminStatus | |||
| INTEGER as dsp2OperStatus | |||
| Integer32 as dsp2LoadCount | |||
| INTEGER as dsp2AalMode | |||
| AtmImaConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as atmImaIntfIndex | |||
| INTEGER as atmImaNeTxState | |||
| INTEGER as atmImaNeRxState | |||
| INTEGER as atmImaFeTxState | |||
| INTEGER as atmImaFeRxState | |||
| INTEGER as atmImaNeRxDefect | |||
| INTEGER as atmImaFeRxDefect | |||
| INTEGER as atmImaAdminStatus | |||
| INTEGER as atmImaOperStatus | |||
| AtmPnniConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as atmPnniIfIndex | |||
| INTEGER as atmPnniSvcMinVpi | |||
| INTEGER as atmPnniSvcMaxVpi | |||
| INTEGER as atmPnniSvcMinVci | |||
| INTEGER as atmPnniSvcMaxVci | |||
| INTEGER as atmPnniAdminStatus | |||
| INTEGER as atmPnniOperStatus | |||
| Integer32 as atmPnniT303 | |||
| Integer32 as atmPnniT308 | |||
| Integer32 as atmPnniT309 | |||
| Integer32 as atmPnniT310 | |||
| Integer32 as atmPnniT313 | |||
| Integer32 as atmPnniT316 | |||
| Integer32 as atmPnniT317 | |||
| Integer32 as atmPnniT322 | |||
| Integer32 as atmPnniT397 | |||
| Integer32 as atmPnniT398 | |||
| Integer32 as atmPnniT399 | |||
| INTEGER as atmPnniCbrServCatSupp | |||
| INTEGER as atmPnniCbrGcacClpEqualZero | |||
| Integer32 as atmPnniCbrMaxCellRate | |||
| Integer32 as atmPnniCbrAvailCellRate | |||
| Integer32 as atmPnniCbrCellXerDelay | |||
| Integer32 as atmPnniCbrCellLossRatioZero | |||
| Integer32 as atmPnniCbrCellLossRatioZeroPlusOne | |||
| Integer32 as atmPnniCbrCellDelayVar | |||
| INTEGER as atmPnniRtVbrServCatSupp | |||
| INTEGER as atmPnniRtVbrGcacClpEqualZero | |||
| Integer32 as atmPnniRtVbrMaxCellRate | |||
| Integer32 as atmPnniRtVbrAvailCellRate | |||
| Integer32 as atmPnniRtVbrCellXerDelay | |||
| Integer32 as atmPnniRtVbrCellLossRatioZero | |||
| Integer32 as atmPnniRtVbrCellLossRatioZeroPlusOne | |||
| Integer32 as atmPnniRtVbrCellDelayVar | |||
| INTEGER as atmPnniRtVbrGcacPresent | |||
| Integer32 as atmPnniRtVbrCellRateMargin | |||
| Integer32 as atmPnniRtVbrVarianceFactor | |||
| Integer32 as atmPnniNrtVbrServCatSupp | |||
| Integer32 as atmPnniNrtVbrGcacClpEqualZero | |||
| Integer32 as atmPnniNrtVbrMaxCellRate | |||
| Integer32 as atmPnniNrtVbrAvailCellRate | |||
| Integer32 as atmPnniNrtVbrCellXerDelay | |||
| Integer32 as atmPnniNrtVbrCellLossRatioZero | |||
| Integer32 as atmPnniNrtVbrCellLossRatioZeroPlusOne | |||
| INTEGER as atmPnniNrtVbrGcacPresent | |||
| Integer32 as atmPnniNrtVbrCellRateMargin | |||
| Integer32 as atmPnniNrtVbrVarianceFactor | |||
| Integer32 as atmPnniAbrServCatSupp | |||
| Integer32 as atmPnniAbrMaxCellRate | |||
| Integer32 as atmPnniAbrAvailCellRate | |||
| Integer32 as atmPnniUbrServCatSupp | |||
| Integer32 as atmPnniUbrMaxCellRate | |||
| INTEGER as atmPnniOverSubscription | |||
| INTEGER as atmPnniSgnlEnabled | |||
| INTEGER as atmPnniVpiSig | |||
| INTEGER as atmPnniVciSig | |||
| Integer32 as atmPnniAvailBwIgr | |||
| Integer32 as atmPnniAvailBwEgr | |||
| INTEGER as atmPnniUPCSupp | |||
| INTEGER as atmPnniUbrLoadBalSupp | |||
| INTEGER as atmPnniSscopRxWndSz | |||
| INTEGER as atmPnniRemoteSvcMinVpi | |||
| INTEGER as atmPnniRemoteSvcMaxVpi | |||
| INTEGER as atmPnniRemoteSvcMinVci | |||
| INTEGER as atmPnniRemoteSvcMaxVci | |||
| INTEGER as atmPnniVpiIlmi | |||
| INTEGER as atmPnniVciIlmi | |||
| INTEGER as atmPnniIlmiProtocolStatus | |||
| INTEGER as atmPnniIlmiOperStatus | |||
| INTEGER as atmPnniIlmiConfigProc | |||
| INTEGER as atmPnniIlmiConnectProc | |||
| INTEGER as atmPnniIlmiAttachPtProc | |||
| INTEGER as atmPnniIlmiSecureLinkProc | |||
| INTEGER as atmPnniIlmiAddrRegProc | |||
| Integer32 as atmPnniIlmiTimerS | |||
| Integer32 as atmPnniIlmiTimerT | |||
| Integer32 as atmPnniIlmiRetryK | |||
| INTEGER as atmPnniConnTrafficShapingFlag | |||
| AtmVnnConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as atmVnnIfIndex | |||
| INTEGER as atmVnnAddrType | |||
| INTEGER as atmVnnSvcMinVpi | |||
| INTEGER as atmVnnSvcMaxVpi | |||
| INTEGER as atmVnnSvcMinVci | |||
| INTEGER as atmVnnSvcMaxVci | |||
| INTEGER as atmVnnAdminStatus | |||
| INTEGER as atmVnnOperStatus | |||
| INTEGER as atmVnnOverSubscription | |||
| OCTET STRING as atmVnnNwPrefix1 | |||
| Integer32 as atmVnnT303 | |||
| Integer32 as atmVnnT308 | |||
| Integer32 as atmVnnT309 | |||
| Integer32 as atmVnnT310 | |||
| Integer32 as atmVnnT313 | |||
| Integer32 as atmVnnT316 | |||
| Integer32 as atmVnnT317 | |||
| Integer32 as atmVnnT322 | |||
| Integer32 as atmVnnT398 | |||
| Integer32 as atmVnnT399 | |||
| IpAddress as atmVnnMyNeighborIpAddress | |||
| DisplayString as atmVnnMyNeighborIfName | |||
| INTEGER as atmVnnVpiSig | |||
| INTEGER as atmVnnVciSig | |||
| INTEGER as atmVnnVpiIlmi | |||
| INTEGER as atmVnnVciIlmi | |||
| INTEGER as atmVnnAtmSignalingStatus | |||
| DisplayString as atmVnnMyIfName | |||
| INTEGER as atmVnnIlmiProtocolStatus | |||
| INTEGER as atmVnnIlmiOperStatus | |||
| INTEGER as atmVnnIlmiConfigProc | |||
| INTEGER as atmVnnIlmiConnectProc | |||
| INTEGER as atmVnnIlmiAttachPtProc | |||
| INTEGER as atmVnnIlmiSecureLinkProc | |||
| INTEGER as atmVnnIlmiAddrRegProc | |||
| Integer32 as atmVnnIlmiTimerS | |||
| Integer32 as atmVnnIlmiTimerT | |||
| Integer32 as atmVnnIlmiRetryK | |||
| Integer32 as atmVnnAvailBwIgr | |||
| Integer32 as atmVnnAvailBwEgr | |||
| INTEGER as atmVnnUPCSupp | |||
| INTEGER as atmVnnUbrLoadBalSupp | |||
| INTEGER as atmVnnSscopRxWndSz | |||
| VirtualIntfConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as virtualIntfConfigIf | |||
| INTEGER as virtualIntfConfigVi | |||
| Integer32 as virtualIntfConfigCellRate | |||
| Integer32 as virtualIntfConfigOverSubs | |||
| RowStatus as virtualIntfConfigRowStatus | |||
| INTEGER as virtualIntfConfigUPCSupp | |||
| Integer32 as virtualIntfAvailBwEgr | |||
| VirtualUNIConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as virtualUNIIfIndex | |||
| INTEGER as virtualUNIVUNIId | |||
| INTEGER as virtualUNIVISupport | |||
| INTEGER as virtualUNIMinVpi | |||
| INTEGER as virtualUNIMaxVpi | |||
| RowStatus as virtualUNIConfigRowStatus | |||
| INTEGER as virtualUNIAddrType | |||
| INTEGER as virtualUNISvcMinVpi | |||
| INTEGER as virtualUNISvcMaxVpi | |||
| INTEGER as virtualUNISvcMinVci | |||
| INTEGER as virtualUNISvcMaxVci | |||
| INTEGER as virtualUNIAdminStatus | |||
| INTEGER as virtualUNIOperStatus | |||
| OCTET STRING as virtualUNINwPrefix1 | |||
| Integer32 as virtualUNIT303 | |||
| Integer32 as virtualUNIT308 | |||
| Integer32 as virtualUNIT309 | |||
| Integer32 as virtualUNIT310 | |||
| Integer32 as virtualUNIT313 | |||
| Integer32 as virtualUNIT316 | |||
| Integer32 as virtualUNIT317 | |||
| Integer32 as virtualUNIT322 | |||
| Integer32 as virtualUNIT398 | |||
| Integer32 as virtualUNIT399 | |||
| IpAddress as virtualUNIMyNeighborIpAddress | |||
| DisplayString as virtualUNIMyNeighborIfName | |||
| INTEGER as virtualUNIVpiSig | |||
| INTEGER as virtualUNIVciSig | |||
| INTEGER as virtualUNISignalingAdminStatus | |||
| INTEGER as virtualUNISignalingOperStatus | |||
| INTEGER as virtualUNIVpiIlmi | |||
| INTEGER as virtualUNIVciIlmi | |||
| DisplayString as virtualUNIMyIfName | |||
| INTEGER as virtualUNIIlmiProtocolStatus | |||
| INTEGER as virtualUNIIlmiOperStatus | |||
| INTEGER as virtualUNIIlmiConfigProc | |||
| INTEGER as virtualUNIIlmiConnectProc | |||
| INTEGER as virtualUNIIlmiAttachPtProc | |||
| INTEGER as virtualUNIIlmiSecureLinkProc | |||
| INTEGER as virtualUNIIlmiAddrRegProc | |||
| Integer32 as virtualUNIIlmiTimerS | |||
| Integer32 as virtualUNIIlmiTimerT | |||
| Integer32 as virtualUNIIlmiRetryK | |||
| INTEGER as virtualUNIIntfType | |||
| OCTET STRING as virtualUNIUserAddress | |||
| INTEGER as virtualUNIUserAddrOrgScope | |||
| INTEGER as virtualUNISscopRxWndSz | |||
| CasConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as casIfIndex | |||
| INTEGER as casAdminStatus | |||
| INTEGER as casOperStatus | |||
| INTEGER as casProtocolType | |||
| INTEGER as casDirection | |||
| INTEGER as casAddressingType | |||
| INTEGER as casBitPatternType | |||
| INTEGER as casGroupId | |||
| ToneAnnceConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as toneAnnceIfIndex | |||
| INTEGER as toneAnnceAdminStatus | |||
| INTEGER as toneAnnceOperStatus | |||
| Gr303IntfConfigEntry | |||
| SEQUENCE | |||
| Integer32 as gr303IntfId | |||
| Integer32 as gr303TMCChannelId | |||
| Integer32 as gr303EOCChannelId | |||
| INTEGER as gr303IntfAdminStatus | |||
| INTEGER as gr303IntfOperStatus | |||
| Gr303Ds0ChanConfigEntry | |||
| SEQUENCE | |||
| INTEGER as gr303Ds0ChanId | |||
| INTEGER as gr303Ds0ChanAdminStatus | |||
| INTEGER as gr303Ds0ChanOperStatus | |||
| Gr303IgConfigEntry | |||
| SEQUENCE | |||
| INTEGER as gr303IgId | |||
| RowStatus as gr303IgRowStatus | |||
| INTEGER as gr303IgAdminStatus | |||
| IntfIndex as gr303IgPrimaryTMCChanIntfId | |||
| IntfIndex as gr303IgPrimaryEOCChanIntfId | |||
| IntfIndex as gr303IgBackupTMCChanIntfId | |||
| IntfIndex as gr303IgBackupEOCChanIntfId | |||
| INTEGER as gr303IgPrimaryTMCStatus | |||
| INTEGER as gr303IgPrimaryEOCStatus | |||
| INTEGER as gr303IgBackupTMCStatus | |||
| INTEGER as gr303IgBackupEOCStatus | |||
| INTEGER as gr303IgTMCProtSwitchProvState | |||
| INTEGER as gr303IgEOCProtSwitchProvState | |||
| INTEGER as gr303IgTMCProtSwitchCommand | |||
| INTEGER as gr303IgEOCProtSwitchCommand | |||
| INTEGER as gr303IgLocalDigitalSwitchType | |||
| INTEGER as gr303IgLocalDigitalSwitchVersion | |||
| Gr303IgIntfConfigEntry | |||
| SEQUENCE | |||
| INTEGER as gr303IntfIgId | |||
| INTEGER as gr303IgIntfId | |||
| INTEGER as gr303IgIntfPhysId | |||
| INTEGER as gr303IgIntfNetId | |||
| RowStatus as gr303IgIntfRowStatus | |||
| Gr303LapdConfigEntry | |||
| SEQUENCE | |||
| INTEGER as gr303LapdIgId | |||
| Integer32 as gr303T200 | |||
| Integer32 as gr303T203 | |||
| Integer32 as gr303N200 | |||
| Integer32 as gr303K | |||
| Gr303TMCConfigEntry | |||
| SEQUENCE | |||
| INTEGER as gr303TMCIgId | |||
| INTEGER as gr303TMCT303 | |||
| INTEGER as gr303TMCT396 | |||
| Gr303IgStatsEntry | |||
| SEQUENCE | |||
| INTEGER as gr303IgStatsIgId | |||
| Integer32 as gr303IgStatsCurrentInCalls | |||
| Integer32 as gr303IgStatsCurrentOutCalls | |||
| Integer32 as gr303IgStatsOutCallSuccessful | |||
| Integer32 as gr303IgStatsOutCallFailed | |||
| Integer32 as gr303IgStatsInCallSuccessful | |||
| Integer32 as gr303IgStatsInCallFailed | |||
| INTEGER as gr303IgStatsReset | |||
| AtmPvcVccEntry | |||
| SEQUENCE | |||
| IntfIndex as atmPvcVccIfA | |||
| INTEGER as atmPvcVccVpiA | |||
| INTEGER as atmPvcVccVciA | |||
| IntfIndex as atmPvcVccIfB | |||
| INTEGER as atmPvcVccVpiB | |||
| INTEGER as atmPvcVccVciB | |||
| INTEGER as atmPvcVccServiceTypeA2B | |||
| INTEGER as atmPvcVccSarTypeA2B | |||
| Integer32 as atmPvcVccPeakCellRateA2B | |||
| Integer32 as atmPvcVccSusCellRateA2B | |||
| Integer32 as atmPvcVccMaxBurstSizeA2B | |||
| INTEGER as atmPvcVccServiceTypeB2A | |||
| INTEGER as atmPvcVccSarTypeB2A | |||
| Integer32 as atmPvcVccPeakCellRateB2A | |||
| Integer32 as atmPvcVccSusCellRateB2A | |||
| Integer32 as atmPvcVccMaxBurstSizeB2A | |||
| INTEGER as atmPvcVccType | |||
| INTEGER as atmPvcVccFlow | |||
| RowStatus as atmPvcVccRowStatus | |||
| INTEGER as atmPvcVccFrwdErrCorrectionA2B | |||
| INTEGER as atmPvcVccFrwdErrCorrectionB2A | |||
| INTEGER as atmPvcVccConnectionStatus | |||
| INTEGER as atmPvcVccOamStatus | |||
| INTEGER as atmPvcVccDualHomed | |||
| INTEGER as atmPvcVccViA | |||
| INTEGER as atmPvcVccViB | |||
| INTEGER as atmPvcVccCnfrmTypeA2B | |||
| INTEGER as atmPvcVccCnfrmTypeB2A | |||
| INTEGER as atmPvcVccVUNIA | |||
| INTEGER as atmPvcVccVUNIB | |||
| INTEGER as atmPvcVccOamStatusB | |||
| INTEGER as atmPvcVccOAMConnEndPtStatusA | |||
| INTEGER as atmPvcVccOAMConnEndPtStatusB | |||
| INTEGER as atmPvcVccOAMConnSegEndPtStatusA | |||
| INTEGER as atmPvcVccOAMConnSegEndPtStatusB | |||
| INTEGER as atmPvcVccMfsA2B | |||
| INTEGER as atmPvcVccMfsB2A | |||
| AtmConnFailureCause as atmPvcVccConnFailureCauseA | |||
| AtmConnFailureCause as atmPvcVccConnFailureCauseB | |||
| INTEGER as atmPvcVccTrafficShapingA2B | |||
| INTEGER as atmPvcVccTrafficShapingB2A | |||
| AtmPvcVpcEntry | |||
| SEQUENCE | |||
| IntfIndex as atmPvcVpcIfA | |||
| INTEGER as atmPvcVpcVpiA | |||
| IntfIndex as atmPvcVpcIfB | |||
| INTEGER as atmPvcVpcVpiB | |||
| INTEGER as atmPvcVpcServiceTypeA2B | |||
| INTEGER as atmPvcVpcSarTypeA2B | |||
| Integer32 as atmPvcVpcPeakCellRateA2B | |||
| Integer32 as atmPvcVpcSusCellRateA2B | |||
| Integer32 as atmPvcVpcMaxBurstSizeA2B | |||
| INTEGER as atmPvcVpcServiceTypeB2A | |||
| INTEGER as atmPvcVpcSarTypeB2A | |||
| Integer32 as atmPvcVpcPeakCellRateB2A | |||
| Integer32 as atmPvcVpcSusCellRateB2A | |||
| Integer32 as atmPvcVpcMaxBurstSizeB2A | |||
| INTEGER as atmPvcVpcType | |||
| INTEGER as atmPvcVpcFlow | |||
| RowStatus as atmPvcVpcRowStatus | |||
| INTEGER as atmPvcVpcConnectionStatus | |||
| INTEGER as atmPvcVpcOamStatus | |||
| INTEGER as atmPvcVpcDualHomed | |||
| INTEGER as atmPvcVpcViA | |||
| INTEGER as atmPvcVpcViB | |||
| INTEGER as atmPvcVpcCnfrmTypeA2B | |||
| INTEGER as atmPvcVpcCnfrmTypeB2A | |||
| INTEGER as atmPvcVpcVUNIA | |||
| INTEGER as atmPvcVpcVUNIB | |||
| INTEGER as atmPvcVpcOamStatusB | |||
| INTEGER as atmPvcVpcOAMConnEndPtStatusA | |||
| INTEGER as atmPvcVpcOAMConnEndPtStatusB | |||
| INTEGER as atmPvcVpcOAMConnSegEndPtStatusA | |||
| INTEGER as atmPvcVpcOAMConnSegEndPtStatusB | |||
| AtmConnFailureCause as atmPvcVpcConnFailureCauseA | |||
| AtmConnFailureCause as atmPvcVpcConnFailureCauseB | |||
| INTEGER as atmPvcVpcTrafficShapingA2B | |||
| INTEGER as atmPvcVpcTrafficShapingB2A | |||
| AtmSvcVccEntry | |||
| SEQUENCE | |||
| IntfIndex as atmSvcVccIfA | |||
| INTEGER as atmSvcVccVpiA | |||
| INTEGER as atmSvcVccVciA | |||
| IntfIndex as atmSvcVccIfB | |||
| INTEGER as atmSvcVccVpiB | |||
| INTEGER as atmSvcVccVciB | |||
| INTEGER as atmSvcVccServiceTypeA2B | |||
| INTEGER as atmSvcVccSarTypeA2B | |||
| Integer32 as atmSvcVccPeakCellRateA2B | |||
| Integer32 as atmSvcVccSusCellRateA2B | |||
| Integer32 as atmSvcVccMaxBurstSizeA2B | |||
| INTEGER as atmSvcVccServiceTypeB2A | |||
| INTEGER as atmSvcVccSarTypeB2A | |||
| Integer32 as atmSvcVccPeakCellRateB2A | |||
| Integer32 as atmSvcVccSusCellRateB2A | |||
| Integer32 as atmSvcVccMaxBurstSizeB2A | |||
| INTEGER as atmSvcVccFlow | |||
| INTEGER as atmSvcVccType | |||
| INTEGER as atmSvcVccConnectionStatus | |||
| INTEGER as atmSvcVccViA | |||
| INTEGER as atmSvcVccViB | |||
| INTEGER as atmSvcVccCnfrmTypeA2B | |||
| INTEGER as atmSvcVccCnfrmTypeB2A | |||
| INTEGER as atmSvcVccVUNIA | |||
| INTEGER as atmSvcVccVUNIB | |||
| INTEGER as atmSvcVccTrafficShapingA2B | |||
| INTEGER as atmSvcVccTrafficShapingB2A | |||
| IpAtmAppPvcVccEntry | |||
| SEQUENCE | |||
| IpAddress as ipAtmAppPvcVccDestAddrA | |||
| IpAddress as ipAtmAppPvcVccSubnetMaskA | |||
| Integer32 as ipAtmAppPvcVccIfB | |||
| INTEGER as ipAtmAppPvcVccVpiB | |||
| INTEGER as ipAtmAppPvcVccVciB | |||
| INTEGER as ipAtmAppPvcVccServiceTypeA2B | |||
| INTEGER as ipAtmAppPvcVccServiceTypeB2A | |||
| Integer32 as ipAtmAppPvcVccPeakCellRateB2A | |||
| Integer32 as ipAtmAppPvcVccSusCellRateB2A | |||
| Integer32 as ipAtmAppPvcVccMaxBurstSizeB2A | |||
| INTEGER as ipAtmAppPvcVccType | |||
| RowStatus as ipAtmAppPvcVccRowStatus | |||
| INTEGER as ipAtmAppPvcVccConnectionStatus | |||
| INTEGER as ipAtmAppPvcVccDualHomed | |||
| INTEGER as ipAtmAppPvcVccViB | |||
| INTEGER as ipAtmAppPvcVccCnfrmTypeB2A | |||
| INTEGER as ipAtmAppPvcVccVUNIB | |||
| INTEGER as ipAtmAppPvcVccMfsB2A | |||
| AtmConnFailureCause as ipAtmAppPvcVccConnFailureCauseB | |||
| INTEGER as ipAtmAppPvcVccTrafficShapingA2B | |||
| INTEGER as ipAtmAppPvcVccOamStatus | |||
| IpAtmAppSvcVccEntry | |||
| SEQUENCE | |||
| IpAddress as ipAtmAppSvcVccDestAddrA | |||
| IpAddress as ipAtmAppSvcVccSubnetMaskA | |||
| Integer32 as ipAtmAppSvcVccIfB | |||
| INTEGER as ipAtmAppSvcVccVpiB | |||
| INTEGER as ipAtmAppSvcVccVciB | |||
| INTEGER as ipAtmAppSvcVccServiceTypeA2B | |||
| INTEGER as ipAtmAppSvcVccServiceTypeB2A | |||
| Integer32 as ipAtmAppSvcVccPeakCellRateB2A | |||
| Integer32 as ipAtmAppSvcVccSusCellRateB2A | |||
| Integer32 as ipAtmAppSvcVccMaxBurstSizeB2A | |||
| INTEGER as ipAtmAppSvcVccType | |||
| INTEGER as ipAtmAppSvcVccConnectionStatus | |||
| INTEGER as ipAtmAppSvcVccViB | |||
| INTEGER as ipAtmAppSvcVccCnfrmTypeB2A | |||
| INTEGER as ipAtmAppSvcVccVUNIB | |||
| INTEGER as ipAtmAppSvcVccTrafficShapingA2B | |||
| CirEmAtmPvcVccEntry | |||
| SEQUENCE | |||
| IntfIndex as cirEmAtmPvcVccIfA | |||
| IntfIndex as cirEmAtmPvcVccIfB | |||
| INTEGER as cirEmAtmPvcVccVpiB | |||
| INTEGER as cirEmAtmPvcVccVciB | |||
| INTEGER as cirEmAtmPvcVccServiceType | |||
| INTEGER as cirEmAtmPvcVccVoiceCompressionA2B | |||
| INTEGER as cirEmAtmPvcVccSilenceDetectionA2B | |||
| INTEGER as cirEmAtmPvcVccEchoCancellationA2B | |||
| INTEGER as cirEmAtmPvcVccFlow | |||
| RowStatus as cirEmAtmPvcVccRowStatus | |||
| INTEGER as cirEmAtmPvcVccCngToneDetectionA2B | |||
| INTEGER as cirEmAtmPvcVccCodingTranslationA2B | |||
| INTEGER as cirEmAtmPvcVccVoiceCompressionB2A | |||
| INTEGER as cirEmAtmPvcVccSilenceDetectionB2A | |||
| INTEGER as cirEmAtmPvcVccEchoCancellationB2A | |||
| INTEGER as cirEmAtmPvcVccCngToneDetectionB2A | |||
| INTEGER as cirEmAtmPvcVccCodingTranslationB2A | |||
| INTEGER as cirEmAtmPvcVccSarTypeB | |||
| INTEGER as cirEmAtmPvcVccConnectionStatus | |||
| INTEGER as cirEmAtmPvcVccDualHomed | |||
| INTEGER as cirEmAtmPvcVccOamStatus | |||
| INTEGER as cirEmAtmPvcVccViB | |||
| INTEGER as cirEmAtmPvcVccCnfrmTypeB2A | |||
| INTEGER as cirEmAtmPvcVccVUNIB | |||
| INTEGER as cirEmAtmPvcVccAal2Cid | |||
| INTEGER as cirEmAtmPvcVccOAMConnEndPtStatus | |||
| INTEGER as cirEmAtmPvcVccOAMConnSegEndPtStatus | |||
| ConnFailureCause as cirEmAtmPvcVccConnFailureCauseA | |||
| AtmConnFailureCause as cirEmAtmPvcVccConnFailureCauseB | |||
| INTEGER as cirEmAtmPvcVccDigitCollectTypeA2B | |||
| INTEGER as cirEmAtmPvcVccDigitCollectTypeB2A | |||
| INTEGER as cirEmAtmPvcVccEncodingStdA2B | |||
| INTEGER as cirEmAtmPvcVccEncodingStdB2A | |||
| INTEGER as cirEmAtmPvcVccEncodingProfileIdA2B | |||
| INTEGER as cirEmAtmPvcVccEncodingProfileIdB2A | |||
| FrAtmPvcVccEntry | |||
| SEQUENCE | |||
| IntfIndex as frAtmPvcVccIfA | |||
| Integer32 as frAtmPvcVccDlciA | |||
| IntfIndex as frAtmPvcVccIfB | |||
| INTEGER as frAtmPvcVccVpiB | |||
| INTEGER as frAtmPvcVccVciB | |||
| Integer32 as frAtmPvcVccMaxFrameSizeIn | |||
| Integer32 as frAtmPvcVccBcIn | |||
| Integer32 as frAtmPvcVccBeIn | |||
| Integer32 as frAtmPvcVccCirIn | |||
| Integer32 as frAtmPvcVccMaxFrameSizeOut | |||
| Integer32 as frAtmPvcVccBcOut | |||
| Integer32 as frAtmPvcVccBeOut | |||
| Integer32 as frAtmPvcVccCirOut | |||
| INTEGER as frAtmPvcVccServiceType | |||
| INTEGER as frAtmPvcVccFlow | |||
| RowStatus as frAtmPvcVccRowStatus | |||
| INTEGER as frAtmPvcVccTimeLenIn | |||
| INTEGER as frAtmPvcVccInterWorkingFuncIn | |||
| INTEGER as frAtmPvcVccTimeLenOut | |||
| INTEGER as frAtmPvcVccInterWorkingFuncOut | |||
| Integer32 as frAtmPvcVccPeakCellRateA2B | |||
| Integer32 as frAtmPvcVccSusCellRateA2B | |||
| Integer32 as frAtmPvcVccMaxBurstSizeA2B | |||
| Integer32 as frAtmPvcVccPeakCellRateB2A | |||
| Integer32 as frAtmPvcVccSusCellRateB2A | |||
| Integer32 as frAtmPvcVccMaxBurstSizeB2A | |||
| INTEGER as frAtmPvcVccConnectionStatus | |||
| INTEGER as frAtmPvcVccDualHomed | |||
| INTEGER as frAtmPvcVccOamStatus | |||
| INTEGER as frAtmPvcVccViB | |||
| INTEGER as frAtmPvcVccCnfrmTypeB2A | |||
| INTEGER as frAtmPvcVccVUNIB | |||
| INTEGER as frAtmPvcVccOAMConnEndPtStatus | |||
| INTEGER as frAtmPvcVccOAMSegEndPtStatus | |||
| INTEGER as frAtmPvcVccMfsB2A | |||
| FrConnFailureCause as frAtmPvcVccConnFailureCauseA | |||
| AtmConnFailureCause as frAtmPvcVccConnFailureCauseB | |||
| INTEGER as frAtmPvcVccTrafficShapingA2B | |||
| FrFrPvcEntry | |||
| SEQUENCE | |||
| IntfIndex as frFrPvcIfA | |||
| Integer32 as frFrPvcDlciA | |||
| IntfIndex as frFrPvcIfB | |||
| Integer32 as frFrPvcDlciB | |||
| Integer32 as frFrPvcMaxFrameSizeA2B | |||
| Integer32 as frFrPvcBcA2B | |||
| Integer32 as frFrPvcBeA2B | |||
| Integer32 as frFrPvcCirA2B | |||
| Integer32 as frFrPvcMaxFrameSizeB2A | |||
| Integer32 as frFrPvcBcB2A | |||
| Integer32 as frFrPvcBeB2A | |||
| Integer32 as frFrPvcCirB2A | |||
| INTEGER as frFrPvcServiceType | |||
| INTEGER as frFrPvcFlow | |||
| RowStatus as frFrPvcRowStatus | |||
| INTEGER as frFrPvcTimeLenA2B | |||
| INTEGER as frFrPvcInterWorkingFuncA2B | |||
| INTEGER as frFrPvcTimeLenB2A | |||
| INTEGER as frFrPvcInterWorkingFuncB2A | |||
| Integer32 as frFrPvcPeakCellRateA2B | |||
| Integer32 as frFrPvcSusCellRateA2B | |||
| Integer32 as frFrPvcMaxBurstSizeA2B | |||
| Integer32 as frFrPvcPeakCellRateB2A | |||
| Integer32 as frFrPvcSusCellRateB2A | |||
| Integer32 as frFrPvcMaxBurstSizeB2A | |||
| INTEGER as frFrPvcConnectionStatus | |||
| FrConnFailureCause as frFrPvcConnFailureCauseA | |||
| FrConnFailureCause as frFrPvcConnFailureCauseB | |||
| VbrAtmPvcVccEntry | |||
| SEQUENCE | |||
| IntfIndex as vbrAtmPvcVccIfA | |||
| IntfIndex as vbrAtmPvcVccIfB | |||
| INTEGER as vbrAtmPvcVccVpiB | |||
| INTEGER as vbrAtmPvcVccVciB | |||
| INTEGER as vbrAtmPvcVccServiceType | |||
| Integer32 as vbrAtmPvcVccPeakCellRateA2B | |||
| Integer32 as vbrAtmPvcVccSusCellRateA2B | |||
| Integer32 as vbrAtmPvcVccMaxBurstSizeA2B | |||
| Integer32 as vbrAtmPvcVccPeakCellRateB2A | |||
| Integer32 as vbrAtmPvcVccSusCellRateB2A | |||
| Integer32 as vbrAtmPvcVccMaxBurstSizeB2A | |||
| INTEGER as vbrAtmPvcVccFlow | |||
| RowStatus as vbrAtmPvcVccRowStatus | |||
| INTEGER as vbrAtmPvcVccConnectionStatus | |||
| INTEGER as vbrAtmPvcVccDualHomed | |||
| INTEGER as vbrAtmPvcVccOamStatus | |||
| INTEGER as vbrAtmPvcVccViB | |||
| INTEGER as vbrAtmPvcVccCnfrmTypeB2A | |||
| INTEGER as vbrAtmPvcVccVUNIB | |||
| INTEGER as vbrAtmPvcVccOAMConnEndPtStatus | |||
| INTEGER as vbrAtmPvcVccOAMSegEndPtStatus | |||
| INTEGER as vbrAtmPvcVccMfsB2A | |||
| ConnFailureCause as vbrAtmPvcVccConnFailureCauseA | |||
| AtmConnFailureCause as vbrAtmPvcVccConnFailureCauseB | |||
| INTEGER as vbrAtmPvcVccSarTypeB | |||
| INTEGER as vbrAtmPvcVccAal2Cid | |||
| INTEGER as vbrAtmPvcVccTrafficShapingA2B | |||
| CirEmCirEmPvcEntry | |||
| SEQUENCE | |||
| IntfIndex as cirEmCirEmPvcIfA | |||
| IntfIndex as cirEmCirEmPvcIfB | |||
| INTEGER as cirEmCirEmPvcEchoCancellationA2B | |||
| INTEGER as cirEmCirEmPvcFlow | |||
| RowStatus as cirEmCirEmPvcRowStatus | |||
| INTEGER as cirEmCirEmPvcCodingTranslationA2B | |||
| INTEGER as cirEmCirEmPvcEchoCancellationB2A | |||
| INTEGER as cirEmCirEmPvcCodingTranslationB2A | |||
| INTEGER as cirEmCirEmPvcConnectionStatus | |||
| INTEGER as cirEmCirEmPvcInterworking | |||
| INTEGER as cirEmCirEmPvcServiceType | |||
| ConnFailureCause as cirEmCirEmPvcConnFailureCauseA | |||
| ConnFailureCause as cirEmCirEmPvcConnFailureCauseB | |||
| VbrVbrPvcEntry | |||
| SEQUENCE | |||
| IntfIndex as vbrVbrPvcIfA | |||
| IntfIndex as vbrVbrPvcIfB | |||
| Integer32 as vbrVbrPvcPeakCellRateA2B | |||
| Integer32 as vbrVbrPvcSusCellRateA2B | |||
| Integer32 as vbrVbrPvcMaxBurstSizeA2B | |||
| Integer32 as vbrVbrPvcPeakCellRateB2A | |||
| Integer32 as vbrVbrPvcSusCellRateB2A | |||
| Integer32 as vbrVbrPvcMaxBurstSizeB2A | |||
| INTEGER as vbrVbrPvcFlow | |||
| RowStatus as vbrVbrPvcRowStatus | |||
| INTEGER as vbrVbrPvcConnectionStatus | |||
| INTEGER as vbrVbrPvcServiceType | |||
| ConnFailureCause as vbrVbrPvcConnFailureCauseA | |||
| ConnFailureCause as vbrVbrPvcConnFailureCauseB | |||
| BridgeBridgePvcEntry | |||
| SEQUENCE | |||
| Integer32 as bridgeBridgePvcIfA | |||
| Integer32 as bridgeBridgePvcIfB | |||
| RowStatus as bridgeBridgePvcRowStatus | |||
| INTEGER as bridgeBridgePvcConnectionStatus | |||
| ConnFailureCause as bridgeBridgePvcConnFailureCauseA | |||
| ConnFailureCause as bridgeBridgePvcConnFailureCauseB | |||
| BridgeAtmPvcVccEntry | |||
| SEQUENCE | |||
| Integer32 as bridgeAtmPvcVccIfA | |||
| Integer32 as bridgeAtmPvcVccIfB | |||
| INTEGER as bridgeAtmPvcVccVpiB | |||
| INTEGER as bridgeAtmPvcVccVciB | |||
| INTEGER as bridgeAtmPvcVccServiceType | |||
| Integer32 as bridgeAtmPvcVccPeakCellRateB2A | |||
| Integer32 as bridgeAtmPvcVccSusCellRateB2A | |||
| Integer32 as bridgeAtmPvcVccMaxBurstSizeB2A | |||
| RowStatus as bridgeAtmPvcVccRowStatus | |||
| INTEGER as bridgeAtmPvcVccConnectionStatus | |||
| INTEGER as bridgeAtmPvcVccDualHomed | |||
| INTEGER as bridgeAtmPvcVccViB | |||
| INTEGER as bridgeAtmPvcVccCnfrmTypeB2A | |||
| INTEGER as bridgeAtmPvcVccVUNIB | |||
| INTEGER as bridgeAtmPvcVccMfsB2A | |||
| ConnFailureCause as bridgeAtmPvcVccConnFailureCauseA | |||
| AtmConnFailureCause as bridgeAtmPvcVccConnFailureCauseB | |||
| INTEGER as bridgeAtmPvcVccOamStatus | |||
| INTEGER as bridgeAtmPvcVccTrafficShapingA2B | |||
| CirEmAtmBkPvcVccEntry | |||
| SEQUENCE | |||
| IntfIndex as cirEmAtmBkPvcVccIfB | |||
| INTEGER as cirEmAtmBkPvcVccVpiB | |||
| INTEGER as cirEmAtmBkPvcVccVciB | |||
| INTEGER as cirEmAtmBkPvcVccActivePvc | |||
| INTEGER as cirEmAtmBkPvcVccAutoSwitch | |||
| RowStatus as cirEmAtmBkPvcVccRowStatus | |||
| INTEGER as cirEmAtmBkPvcVccViB | |||
| INTEGER as cirEmAtmBkPvcVccVUNIB | |||
| AtmConnFailureCause as cirEmAtmBkPvcVccConnFailureCauseB | |||
| VbrAtmBkPvcVccEntry | |||
| SEQUENCE | |||
| IntfIndex as vbrAtmBkPvcVccIfB | |||
| INTEGER as vbrAtmBkPvcVccVpiB | |||
| INTEGER as vbrAtmBkPvcVccVciB | |||
| INTEGER as vbrAtmBkPvcVccActivePvc | |||
| INTEGER as vbrAtmBkPvcVccAutoSwitch | |||
| RowStatus as vbrAtmBkPvcVccRowStatus | |||
| INTEGER as vbrAtmBkPvcVccViB | |||
| INTEGER as vbrAtmBkPvcVccVUNIB | |||
| AtmConnFailureCause as vbrAtmBkPvcVccConnFailureCauseB | |||
| AtmSpvcVccAddrEntry | |||
| SEQUENCE | |||
| IntfIndex as atmSpvcVccIfA | |||
| OCTET STRING as atmSpvcVccAtmPortAddr | |||
| RowStatus as atmSpvcVccAddrRowStatus | |||
| AtmSpvcVccEntry | |||
| SEQUENCE | |||
| INTEGER as atmSpvcVccVpiA | |||
| INTEGER as atmSpvcVccVciA | |||
| IntfIndex as atmSpvcVccIfB | |||
| INTEGER as atmSpvcVccVpiB | |||
| INTEGER as atmSpvcVccVciB | |||
| INTEGER as atmSpvcVccServiceTypeA2B | |||
| INTEGER as atmSpvcVccSarTypeA2B | |||
| Integer32 as atmSpvcVccPeakCellRateA2B | |||
| Integer32 as atmSpvcVccSusCellRateA2B | |||
| Integer32 as atmSpvcVccMaxBurstSizeA2B | |||
| INTEGER as atmSpvcVccFrwdErrCorrectionA2B | |||
| INTEGER as atmSpvcVccServiceTypeB2A | |||
| INTEGER as atmSpvcVccSarTypeB2A | |||
| Integer32 as atmSpvcVccPeakCellRateB2A | |||
| Integer32 as atmSpvcVccSusCellRateB2A | |||
| Integer32 as atmSpvcVccMaxBurstSizeB2A | |||
| INTEGER as atmSpvcVccFrwdErrCorrectionB2A | |||
| INTEGER as atmSpvcVccFlow | |||
| INTEGER as atmSpvcVccType | |||
| INTEGER as atmSpvcVccConnType | |||
| INTEGER as atmSpvcVccLeafReference | |||
| INTEGER as atmSpvcVccOperStatus | |||
| RowStatus as atmSpvcVccRowStatus | |||
| INTEGER as atmSpvcVccViA | |||
| INTEGER as atmSpvcVccViB | |||
| INTEGER as atmSpvcVccTrafficShapingA2B | |||
| INTEGER as atmSpvcVccTrafficShapingB2A | |||
| AtmSpvcVccActiveSvcEntry | |||
| SEQUENCE | |||
| OCTET STRING as atmSpvcVccRemoteAtmPortAddr | |||
| INTEGER as atmSpvcVccRemoteSelectType | |||
| INTEGER as atmSpvcVccRemoteVpi | |||
| INTEGER as atmSpvcVccRemoteVci | |||
| INTEGER as atmSpvcVccRetryInterval | |||
| INTEGER as atmSpvcVccRetryLimit | |||
| INTEGER as atmSpvcVccRestart | |||
| Integer32 as atmSpvcVccRetryFailure | |||
| INTEGER as atmSpvcVccReleaseCause | |||
| OCTET STRING as atmSpvcVccReleaseDiag | |||
| CirEmAtmSpvcVccEntry | |||
| SEQUENCE | |||
| IntfIndex as cirEmAtmSpvcVccIfA | |||
| IntfIndex as cirEmAtmSpvcVccIfB | |||
| INTEGER as cirEmAtmSpvcVccVpiB | |||
| INTEGER as cirEmAtmSpvcVccVciB | |||
| INTEGER as cirEmAtmSpvcVccVoiceCompressionA2B | |||
| INTEGER as cirEmAtmSpvcVccSilenceDetectionA2B | |||
| INTEGER as cirEmAtmSpvcVccEchoCancellationA2B | |||
| INTEGER as cirEmAtmSpvcVccCngToneDetectionA2B | |||
| INTEGER as cirEmAtmSpvcVccCodingTranslationA2B | |||
| INTEGER as cirEmAtmSpvcVccVoiceCompressionB2A | |||
| INTEGER as cirEmAtmSpvcVccSilenceDetectionB2A | |||
| INTEGER as cirEmAtmSpvcVccEchoCancellationB2A | |||
| INTEGER as cirEmAtmSpvcVccCngToneDetectionB2A | |||
| INTEGER as cirEmAtmSpvcVccCodingTranslationB2A | |||
| INTEGER as cirEmAtmSpvcVccFlow | |||
| INTEGER as cirEmAtmSpvcVccServiceType | |||
| INTEGER as cirEmAtmSpvcVccConnType | |||
| OCTET STRING as cirEmAtmSpvcVccCePortAddr | |||
| INTEGER as cirEmAtmSpvcVccOperStatus | |||
| RowStatus as cirEmAtmSpvcVccRowStatus | |||
| INTEGER as cirEmAtmSpvcVccViB | |||
| CirEmAtmSpvcVccActiveSvcEntry | |||
| SEQUENCE | |||
| OCTET STRING as cirEmAtmSpvcVccRemoteCePortAddr | |||
| INTEGER as cirEmAtmSpvcVccRetryInterval | |||
| INTEGER as cirEmAtmSpvcVccRetryLimit | |||
| INTEGER as cirEmAtmSpvcVccRestart | |||
| Integer32 as cirEmAtmSpvcVccRetryFailure | |||
| INTEGER as cirEmAtmSpvcVccReleaseCause | |||
| OCTET STRING as cirEmAtmSpvcVccReleaseDiag | |||
| VbrAtmSpvcVccEntry | |||
| SEQUENCE | |||
| IntfIndex as vbrAtmSpvcVccIfA | |||
| IntfIndex as vbrAtmSpvcVccIfB | |||
| INTEGER as vbrAtmSpvcVccVpiB | |||
| INTEGER as vbrAtmSpvcVccVciB | |||
| INTEGER as vbrAtmSpvcVccServiceType | |||
| Integer32 as vbrAtmSpvcVccPeakCellRateA2B | |||
| Integer32 as vbrAtmSpvcVccSusCellRateA2B | |||
| Integer32 as vbrAtmSpvcVccMaxBurstSizeA2B | |||
| Integer32 as vbrAtmSpvcVccPeakCellRateB2A | |||
| Integer32 as vbrAtmSpvcVccSusCellRateB2A | |||
| Integer32 as vbrAtmSpvcVccMaxBurstSizeB2A | |||
| INTEGER as vbrAtmSpvcVccFlow | |||
| INTEGER as vbrAtmSpvcVccConnType | |||
| OCTET STRING as vbrAtmSpvcVccVbrPortAddr | |||
| INTEGER as vbrAtmSpvcVccOperStatus | |||
| RowStatus as vbrAtmSpvcVccRowStatus | |||
| INTEGER as vbrAtmSpvcVccViB | |||
| INTEGER as vbrAtmSpvcVccTrafficShapingA2B | |||
| VbrAtmSpvcVccActiveSvcEntry | |||
| SEQUENCE | |||
| OCTET STRING as vbrAtmSpvcVccRemoteVbrPortAddr | |||
| INTEGER as vbrAtmSpvcVccRetryInterval | |||
| INTEGER as vbrAtmSpvcVccRetryLimit | |||
| INTEGER as vbrAtmSpvcVccRestart | |||
| Integer32 as vbrAtmSpvcVccRetryFailure | |||
| INTEGER as vbrAtmSpvcVccReleaseCause | |||
| OCTET STRING as vbrAtmSpvcVccReleaseDiag | |||
| AtmSpvcVccRlsEntry | |||
| SEQUENCE | |||
| INTEGER as atmSpvcVccRelease | |||
| CirEmAtmSpvcVccRlsEntry | |||
| SEQUENCE | |||
| INTEGER as cirEmAtmSpvcVccRelease | |||
| VbrAtmSpvcVccRlsEntry | |||
| SEQUENCE | |||
| INTEGER as vbrAtmSpvcVccRelease | |||
| FrAtmBkPvcVccEntry | |||
| SEQUENCE | |||
| IntfIndex as frAtmBkPvcVccIfB | |||
| INTEGER as frAtmBkPvcVccVpiB | |||
| INTEGER as frAtmBkPvcVccVciB | |||
| INTEGER as frAtmBkPvcVccActivePvc | |||
| INTEGER as frAtmBkPvcVccAutoSwitch | |||
| RowStatus as frAtmBkPvcVccRowStatus | |||
| INTEGER as frAtmBkPvcVccViB | |||
| INTEGER as frAtmBkPvcVccVUNIB | |||
| AtmConnFailureCause as frAtmBkPvcVccConnFailureCauseB | |||
| AtmBkPvcVccEntry | |||
| SEQUENCE | |||
| IntfIndex as atmBkPvcVccIfB | |||
| INTEGER as atmBkPvcVccVpiB | |||
| INTEGER as atmBkPvcVccVciB | |||
| INTEGER as atmBkPvcVccActivePvc | |||
| INTEGER as atmBkPvcVccAutoSwitch | |||
| RowStatus as atmBkPvcVccRowStatus | |||
| INTEGER as atmBkPvcVccViB | |||
| INTEGER as atmBkPvcVccVUNIB | |||
| AtmConnFailureCause as atmBkPvcVccConnFailureCauseB | |||
| AtmBkPvcVpcEntry | |||
| SEQUENCE | |||
| IntfIndex as atmBkPvcVpcIfB | |||
| INTEGER as atmBkPvcVpcVpiB | |||
| INTEGER as atmBkPvcVpcActivePvc | |||
| INTEGER as atmBkPvcVpcAutoSwitch | |||
| RowStatus as atmBkPvcVpcRowStatus | |||
| INTEGER as atmBkPvcVpcViB | |||
| INTEGER as atmBkPvcVpcVUNIB | |||
| AtmConnFailureCause as atmBkPvcVpcConnFailureCauseB | |||
| BridgeAtmBkPvcVccEntry | |||
| SEQUENCE | |||
| IntfIndex as bridgeAtmBkPvcVccIfB | |||
| INTEGER as bridgeAtmBkPvcVccVpiB | |||
| INTEGER as bridgeAtmBkPvcVccVciB | |||
| INTEGER as bridgeAtmBkPvcVccActivePvc | |||
| INTEGER as bridgeAtmBkPvcVccAutoSwitch | |||
| RowStatus as bridgeAtmBkPvcVccRowStatus | |||
| INTEGER as bridgeAtmBkPvcVccViB | |||
| INTEGER as bridgeAtmBkPvcVccVUNIB | |||
| AtmConnFailureCause as bridgeAtmBkPvcVccConnFailureCauseB | |||
| IpAtmBkAppPvcVccEntry | |||
| SEQUENCE | |||
| IntfIndex as ipAtmBkAppPvcVccIfB | |||
| INTEGER as ipAtmBkAppPvcVccVpiB | |||
| INTEGER as ipAtmBkAppPvcVccVciB | |||
| INTEGER as ipAtmBkAppPvcVccActivePvc | |||
| INTEGER as ipAtmBkAppPvcVccAutoSwitch | |||
| RowStatus as ipAtmBkAppPvcVccRowStatus | |||
| INTEGER as ipAtmBkAppPvcVccViB | |||
| INTEGER as ipAtmBkAppPvcVccVUNIB | |||
| AtmConnFailureCause as ipAtmBkAppPvcVccConnFailureCauseB | |||
| SpvcAddrEntry | |||
| SEQUENCE | |||
| IntfIndex as spvcAddrIfA | |||
| OCTET STRING as spvcAddrLocalPortAddr | |||
| RowStatus as spvcAddrRowStatus | |||
| FrAtmSpvcVccEntry | |||
| SEQUENCE | |||
| Integer32 as frAtmSpvcVccDlciA | |||
| IntfIndex as frAtmSpvcVccIfB | |||
| INTEGER as frAtmSpvcVccVpiB | |||
| INTEGER as frAtmSpvcVccVciB | |||
| Integer32 as frAtmSpvcVccMaxFrameSizeIn | |||
| Integer32 as frAtmSpvcVccBcIn | |||
| Integer32 as frAtmSpvcVccBeIn | |||
| Integer32 as frAtmSpvcVccCirIn | |||
| Integer32 as frAtmSpvcVccMaxFrameSizeOut | |||
| Integer32 as frAtmSpvcVccBcOut | |||
| Integer32 as frAtmSpvcVccBeOut | |||
| Integer32 as frAtmSpvcVccCirOut | |||
| INTEGER as frAtmSpvcVccServiceType | |||
| INTEGER as frAtmSpvcVccFlow | |||
| INTEGER as frAtmSpvcVccTimeLenIn | |||
| INTEGER as frAtmSpvcVccTimeLenOut | |||
| Integer32 as frAtmSpvcVccPeakCellRateA2B | |||
| Integer32 as frAtmSpvcVccSusCellRateA2B | |||
| Integer32 as frAtmSpvcVccMaxBurstSizeA2B | |||
| Integer32 as frAtmSpvcVccPeakCellRateB2A | |||
| Integer32 as frAtmSpvcVccSusCellRateB2A | |||
| Integer32 as frAtmSpvcVccMaxBurstSizeB2A | |||
| INTEGER as frAtmSpvcVccInterWorkingFunc | |||
| INTEGER as frAtmSpvcVccConnType | |||
| INTEGER as frAtmSpvcVccOperStatus | |||
| RowStatus as frAtmSpvcVccRowStatus | |||
| OCTET STRING as frAtmSpvcVccRemoteFrPortAddr | |||
| INTEGER as frAtmSpvcVccRemoteSelectType | |||
| INTEGER as frAtmSpvcVccRemoteDlci | |||
| INTEGER as frAtmSpvcVccRemoteVpi | |||
| INTEGER as frAtmSpvcVccRemoteVci | |||
| INTEGER as frAtmSpvcVccRetryInterval | |||
| INTEGER as frAtmSpvcVccRetryLimit | |||
| INTEGER as frAtmSpvcVccRestart | |||
| Integer32 as frAtmSpvcVccRetryFailure | |||
| INTEGER as frAtmSpvcVccReleaseCause | |||
| OCTET STRING as frAtmSpvcVccReleaseDiag | |||
| INTEGER as frAtmSpvcVccRelease | |||
| Integer32 as frAtmSpvcVccStatsCellsEncodedHiA | |||
| Integer32 as frAtmSpvcVccStatsCellsEncodedLoA | |||
| Integer32 as frAtmSpvcVccStatsCellsDecodedHiA | |||
| Integer32 as frAtmSpvcVccStatsCellsDecodedLoA | |||
| Integer32 as frAtmSpvcVccStatsInCellCountHiB | |||
| Integer32 as frAtmSpvcVccStatsInCellCountLoB | |||
| Integer32 as frAtmSpvcVccStatsOutCellCountHiB | |||
| Integer32 as frAtmSpvcVccStatsOutCellCountLoB | |||
| Integer32 as frAtmSpvcVccStatsTimer | |||
| Integer32 as frAtmSpvcVccStatsFramesDroppedA | |||
| Integer32 as frAtmSpvcVccStatsOdometerCellsEncodedHiA | |||
| Integer32 as frAtmSpvcVccStatsOdometerCellsEncodedLoA | |||
| Integer32 as frAtmSpvcVccStatsOdometerCellsDecodedHiA | |||
| Integer32 as frAtmSpvcVccStatsOdometerCellsDecodedLoA | |||
| Integer32 as frAtmSpvcVccStatsInOdometerCellCountHiB | |||
| Integer32 as frAtmSpvcVccStatsInOdometerCellCountLoB | |||
| Integer32 as frAtmSpvcVccStatsOutOdometerCellCountHiB | |||
| Integer32 as frAtmSpvcVccStatsOutOdometerCellCountLoB | |||
| Integer32 as frAtmSpvcVccStatsOdometerTimer | |||
| INTEGER as frAtmSpvcVccStatsOdometerReset | |||
| Integer32 as frAtmSpvcVccStatsAal5ErrFramesA | |||
| Integer32 as frAtmSpvcVccStatsFramesTaggedA | |||
| Integer32 as frAtmSpvcVccStatsCellsDroppedB | |||
| Integer32 as frAtmSpvcVccStatsCellsTaggedB | |||
| INTEGER as frAtmSpvcVccVUNIB | |||
| INTEGER as frAtmSpvcVccTrafficShapingA2B | |||
| INTEGER as frAtmSpvcVccPriority | |||
| AtmAtmSpvcVccEntry | |||
| SEQUENCE | |||
| INTEGER as atmAtmSpvcVccVpiA | |||
| INTEGER as atmAtmSpvcVccVciA | |||
| OCTET STRING as atmAtmSpvcVccRemoteAtmPortAddr | |||
| IntfIndex as atmAtmSpvcVccIfB | |||
| INTEGER as atmAtmSpvcVccVpiB | |||
| INTEGER as atmAtmSpvcVccVciB | |||
| INTEGER as atmAtmSpvcVccServiceTypeA2B | |||
| INTEGER as atmAtmSpvcVccSarTypeA2B | |||
| Integer32 as atmAtmSpvcVccPeakCellRateA2B | |||
| Integer32 as atmAtmSpvcVccSusCellRateA2B | |||
| Integer32 as atmAtmSpvcVccMaxBurstSizeA2B | |||
| INTEGER as atmAtmSpvcVccFrwdErrCorrectionA2B | |||
| INTEGER as atmAtmSpvcVccServiceTypeB2A | |||
| INTEGER as atmAtmSpvcVccSarTypeB2A | |||
| Integer32 as atmAtmSpvcVccPeakCellRateB2A | |||
| Integer32 as atmAtmSpvcVccSusCellRateB2A | |||
| Integer32 as atmAtmSpvcVccMaxBurstSizeB2A | |||
| INTEGER as atmAtmSpvcVccFrwdErrCorrectionB2A | |||
| INTEGER as atmAtmSpvcVccFlow | |||
| INTEGER as atmAtmSpvcVccType | |||
| INTEGER as atmAtmSpvcVccConnType | |||
| INTEGER as atmAtmSpvcVccLeafReference | |||
| INTEGER as atmAtmSpvcVccOperStatus | |||
| RowStatus as atmAtmSpvcVccRowStatus | |||
| INTEGER as atmAtmSpvcVccRemoteSelectType | |||
| INTEGER as atmAtmSpvcVccRemoteVpi | |||
| INTEGER as atmAtmSpvcVccRemoteVci | |||
| INTEGER as atmAtmSpvcVccRetryInterval | |||
| INTEGER as atmAtmSpvcVccRetryLimit | |||
| INTEGER as atmAtmSpvcVccRestart | |||
| Integer32 as atmAtmSpvcVccRetryFailure | |||
| INTEGER as atmAtmSpvcVccReleaseCause | |||
| OCTET STRING as atmAtmSpvcVccReleaseDiag | |||
| INTEGER as atmAtmSpvcVccRelease | |||
| Integer32 as atmAtmSpvcVccStatsInCellCountHiA | |||
| Integer32 as atmAtmSpvcVccStatsInCellCountLoA | |||
| Integer32 as atmAtmSpvcVccStatsOutCellCountHiA | |||
| Integer32 as atmAtmSpvcVccStatsOutCellCountLoA | |||
| Integer32 as atmAtmSpvcVccStatsInCellCountHiB | |||
| Integer32 as atmAtmSpvcVccStatsInCellCountLoB | |||
| Integer32 as atmAtmSpvcVccStatsOutCellCountHiB | |||
| Integer32 as atmAtmSpvcVccStatsOutCellCountLoB | |||
| Integer32 as atmAtmSpvcVccStatsTimer | |||
| INTEGER as atmAtmSpvcVccStatsFrwdErrCrrctnRateA2B | |||
| INTEGER as atmAtmSpvcVccStatsFrwdErrCrrctnRateB2A | |||
| Integer32 as atmAtmSpvcVccStatsInOdometerCellCountHiA | |||
| Integer32 as atmAtmSpvcVccStatsInOdometerCellCountLoA | |||
| Integer32 as atmAtmSpvcVccStatsOutOdometerCellCountHiA | |||
| Integer32 as atmAtmSpvcVccStatsOutOdometerCellCountLoA | |||
| Integer32 as atmAtmSpvcVccStatsInOdometerCellCountHiB | |||
| Integer32 as atmAtmSpvcVccStatsInOdometerCellCountLoB | |||
| Integer32 as atmAtmSpvcVccStatsOutOdometerCellCountHiB | |||
| Integer32 as atmAtmSpvcVccStatsOutOdometerCellCountLoB | |||
| Integer32 as atmAtmSpvcVccStatsOdometerTimer | |||
| INTEGER as atmAtmSpvcVccStatsOdometerReset | |||
| INTEGER as atmAtmSpvcVccViA | |||
| INTEGER as atmAtmSpvcVccViB | |||
| Integer32 as atmAtmSpvcVccStatsCellsDroppedA | |||
| Integer32 as atmAtmSpvcVccStatsCellsTaggedA | |||
| Integer32 as atmAtmSpvcVccStatsCellsDroppedB | |||
| Integer32 as atmAtmSpvcVccStatsCellsTaggedB | |||
| INTEGER as atmAtmSpvcVccVUNIA | |||
| INTEGER as atmAtmSpvcVccVUNIB | |||
| INTEGER as atmAtmSpvcVccTrafficShapingA2B | |||
| INTEGER as atmAtmSpvcVccTrafficShapingB2A | |||
| INTEGER as atmAtmSpvcVccPriority | |||
| CirAtmSpvcVccEntry | |||
| SEQUENCE | |||
| OCTET STRING as cirAtmSpvcVccRemoteCePortAddr | |||
| IntfIndex as cirAtmSpvcVccIfB | |||
| INTEGER as cirAtmSpvcVccVpiB | |||
| INTEGER as cirAtmSpvcVccVciB | |||
| INTEGER as cirAtmSpvcVccVoiceCompressionA2B | |||
| INTEGER as cirAtmSpvcVccSilenceDetectionA2B | |||
| INTEGER as cirAtmSpvcVccEchoCancellationA2B | |||
| INTEGER as cirAtmSpvcVccCngToneDetectionA2B | |||
| INTEGER as cirAtmSpvcVccCodingTranslationA2B | |||
| INTEGER as cirAtmSpvcVccVoiceCompressionB2A | |||
| INTEGER as cirAtmSpvcVccSilenceDetectionB2A | |||
| INTEGER as cirAtmSpvcVccEchoCancellationB2A | |||
| INTEGER as cirAtmSpvcVccCngToneDetectionB2A | |||
| INTEGER as cirAtmSpvcVccCodingTranslationB2A | |||
| INTEGER as cirAtmSpvcVccFlow | |||
| INTEGER as cirAtmSpvcVccServiceType | |||
| INTEGER as cirAtmSpvcVccConnType | |||
| INTEGER as cirAtmSpvcVccOperStatus | |||
| RowStatus as cirAtmSpvcVccRowStatus | |||
| INTEGER as cirAtmSpvcVccViB | |||
| INTEGER as cirAtmSpvcVccRetryInterval | |||
| INTEGER as cirAtmSpvcVccRetryLimit | |||
| INTEGER as cirAtmSpvcVccRestart | |||
| Integer32 as cirAtmSpvcVccRetryFailure | |||
| INTEGER as cirAtmSpvcVccReleaseCause | |||
| OCTET STRING as cirAtmSpvcVccReleaseDiag | |||
| INTEGER as cirAtmSpvcVccRelease | |||
| Integer32 as cirAtmSpvcVccStatsCellsEncodedHiA | |||
| Integer32 as cirAtmSpvcVccStatsCellsEncodedLoA | |||
| Integer32 as cirAtmSpvcVccStatsCellsDecodedHiA | |||
| Integer32 as cirAtmSpvcVccStatsCellsDecodedLoA | |||
| Integer32 as cirAtmSpvcVccStatsInCellCountHiB | |||
| Integer32 as cirAtmSpvcVccStatsInCellCountLoB | |||
| Integer32 as cirAtmSpvcVccStatsOutCellCountHiB | |||
| Integer32 as cirAtmSpvcVccStatsOutCellCountLoB | |||
| Integer32 as cirAtmSpvcVccStatsTimer | |||
| Integer32 as cirAtmSpvcVccStatsOdometerCellsEncodedHiA | |||
| Integer32 as cirAtmSpvcVccStatsOdometerCellsEncodedLoA | |||
| Integer32 as cirAtmSpvcVccStatsOdometerCellsDecodedHiA | |||
| Integer32 as cirAtmSpvcVccStatsOdometerCellsDecodedLoA | |||
| Integer32 as cirAtmSpvcVccStatsInOdometerCellCountHiB | |||
| Integer32 as cirAtmSpvcVccStatsInOdometerCellCountLoB | |||
| Integer32 as cirAtmSpvcVccStatsOutOdometerCellCountHiB | |||
| Integer32 as cirAtmSpvcVccStatsOutOdometerCellCountLoB | |||
| Integer32 as cirAtmSpvcVccStatsOdometerTimer | |||
| INTEGER as cirAtmSpvcVccStatsOdometerReset | |||
| Integer32 as cirAtmSpvcVccStatsCellsDroppedB | |||
| Integer32 as cirAtmSpvcVccStatsCellsTaggedB | |||
| INTEGER as cirAtmSpvcVccVUNIB | |||
| Integer32 as cirAtmSpvcVccSarTypeB | |||
| INTEGER as cirAtmSpvcVccPriority | |||
| VbrAtmSpvcEntry | |||
| SEQUENCE | |||
| OCTET STRING as vbrAtmSpvcRemoteVbrPortAddr | |||
| IntfIndex as vbrAtmSpvcIfB | |||
| INTEGER as vbrAtmSpvcVpiB | |||
| INTEGER as vbrAtmSpvcVciB | |||
| INTEGER as vbrAtmSpvcServiceType | |||
| Integer32 as vbrAtmSpvcPeakCellRateA2B | |||
| Integer32 as vbrAtmSpvcSusCellRateA2B | |||
| Integer32 as vbrAtmSpvcMaxBurstSizeA2B | |||
| Integer32 as vbrAtmSpvcPeakCellRateB2A | |||
| Integer32 as vbrAtmSpvcSusCellRateB2A | |||
| Integer32 as vbrAtmSpvcMaxBurstSizeB2A | |||
| INTEGER as vbrAtmSpvcFlow | |||
| INTEGER as vbrAtmSpvcConnType | |||
| INTEGER as vbrAtmSpvcOperStatus | |||
| RowStatus as vbrAtmSpvcRowStatus | |||
| INTEGER as vbrAtmSpvcViB | |||
| INTEGER as vbrAtmSpvcRetryInterval | |||
| INTEGER as vbrAtmSpvcRetryLimit | |||
| INTEGER as vbrAtmSpvcRestart | |||
| Integer32 as vbrAtmSpvcRetryFailure | |||
| INTEGER as vbrAtmSpvcReleaseCause | |||
| OCTET STRING as vbrAtmSpvcReleaseDiag | |||
| INTEGER as vbrAtmSpvcRelease | |||
| Integer32 as vbrAtmSpvcStatsCellsEncodedHiA | |||
| Integer32 as vbrAtmSpvcStatsCellsEncodedLoA | |||
| Integer32 as vbrAtmSpvcStatsCellsDecodedHiA | |||
| Integer32 as vbrAtmSpvcStatsCellsDecodedLoA | |||
| Integer32 as vbrAtmSpvcStatsInCellCountHiB | |||
| Integer32 as vbrAtmSpvcStatsInCellCountLoB | |||
| Integer32 as vbrAtmSpvcStatsOutCellCountHiB | |||
| Integer32 as vbrAtmSpvcStatsOutCellCountLoB | |||
| Integer32 as vbrAtmSpvcStatsTimer | |||
| Integer32 as vbrAtmSpvcStatsOdometerCellsEncodedHiA | |||
| Integer32 as vbrAtmSpvcStatsOdometerCellsEncodedLoA | |||
| Integer32 as vbrAtmSpvcStatsOdometerCellsDecodedHiA | |||
| Integer32 as vbrAtmSpvcStatsOdometerCellsDecodedLoA | |||
| Integer32 as vbrAtmSpvcStatsInOdometerCellCountHiB | |||
| Integer32 as vbrAtmSpvcStatsInOdometerCellCountLoB | |||
| Integer32 as vbrAtmSpvcStatsOutOdometerCellCountHiB | |||
| Integer32 as vbrAtmSpvcStatsOutOdometerCellCountLoB | |||
| Integer32 as vbrAtmSpvcStatsOdometerTimer | |||
| INTEGER as vbrAtmSpvcStatsOdometerReset | |||
| Integer32 as vbrAtmSpvcStatsCellsDroppedB | |||
| Integer32 as vbrAtmSpvcStatsCellsTaggedB | |||
| INTEGER as vbrAtmSpvcVUNIB | |||
| INTEGER as vbrAtmSpvcTrafficShapingA2B | |||
| INTEGER as vbrAtmSpvcPriority | |||
| Aal2TrunkConfigEntry | |||
| SEQUENCE | |||
| IntfIndex as aal2TrunkConfigIf | |||
| INTEGER as aal2TrunkConfigVpi | |||
| INTEGER as aal2TrunkConfigVci | |||
| INTEGER as aal2TrunkConfigServiceType | |||
| Integer32 as aal2TrunkConfigPeakCellRateIgr | |||
| Integer32 as aal2TrunkConfigSusCellRateIgr | |||
| Integer32 as aal2TrunkConfigMaxBurstSizeIgr | |||
| Integer32 as aal2TrunkConfigPeakCellRateEgr | |||
| Integer32 as aal2TrunkConfigSusCellRateEgr | |||
| Integer32 as aal2TrunkConfigMaxBurstSizeEgr | |||
| INTEGER as aal2TrunkConfigFlow | |||
| RowStatus as aal2TrunkConfigRowStatus | |||
| INTEGER as aal2TrunkConfigConnectionStatus | |||
| INTEGER as aal2TrunkConfigViB | |||
| INTEGER as aal2TrunkConfigCnfrmTypeB2A | |||
| INTEGER as aal2TrunkConfigVUNIB | |||
| INTEGER as aal2TrunkAvailBwIgr | |||
| INTEGER as aal2TrunkAvailBwEgr | |||
| INTEGER as aal2TrunkGR303 | |||
| INTEGER as aal2TrunkConfigOamStatus | |||
| AtmConnFailureCause as aal2TrunkConnFailureCauseB | |||
| INTEGER as aal2TrunkCuTimer | |||
| Gr303Aal2PvcVccEntry | |||
| SEQUENCE | |||
| INTEGER as gr303Aal2PvcVccGr303IgId | |||
| INTEGER as gr303Aal2PvcVccGr303CallRef | |||
| IntfIndex as gr303Aal2PvcVccIfB | |||
| INTEGER as gr303Aal2PvcVccVpiB | |||
| INTEGER as gr303Aal2PvcVccVciB | |||
| INTEGER as gr303Aal2PvcVccAal2Cid | |||
| RowStatus as gr303Aal2PvcVccRowStatus | |||
| INTEGER as gr303Aal2PvcVccVoiceEncodingProfile | |||
| INTEGER as gr303Aal2PvcVccVoiceCompression | |||
| INTEGER as gr303Aal2PvcVccSilenceDetection | |||
| INTEGER as gr303Aal2PvcVccEchoCancellation | |||
| INTEGER as gr303Aal2PvcVccCngToneDetection | |||
| INTEGER as gr303Aal2PvcVccCodingTranslation | |||
| INTEGER as gr303Aal2PvcVccConnectionStatus | |||
| INTEGER as gr303Aal2PvcVccAltLineType | |||
| AtmAtmSpvcVpcEntry | |||
| SEQUENCE | |||
| INTEGER as atmAtmSpvcVpcVpiA | |||
| OCTET STRING as atmAtmSpvcVpcRemoteAtmPortAddr | |||
| IntfIndex as atmAtmSpvcVpcIfB | |||
| INTEGER as atmAtmSpvcVpcVpiB | |||
| INTEGER as atmAtmSpvcVpcServiceTypeA2B | |||
| INTEGER as atmAtmSpvcVpcSarTypeA2B | |||
| Integer32 as atmAtmSpvcVpcPeakCellRateA2B | |||
| Integer32 as atmAtmSpvcVpcSusCellRateA2B | |||
| Integer32 as atmAtmSpvcVpcMaxBurstSizeA2B | |||
| INTEGER as atmAtmSpvcVpcFrwdErrCorrectionA2B | |||
| INTEGER as atmAtmSpvcVpcServiceTypeB2A | |||
| INTEGER as atmAtmSpvcVpcSarTypeB2A | |||
| Integer32 as atmAtmSpvcVpcPeakCellRateB2A | |||
| Integer32 as atmAtmSpvcVpcSusCellRateB2A | |||
| Integer32 as atmAtmSpvcVpcMaxBurstSizeB2A | |||
| INTEGER as atmAtmSpvcVpcFrwdErrCorrectionB2A | |||
| INTEGER as atmAtmSpvcVpcFlow | |||
| INTEGER as atmAtmSpvcVpcType | |||
| INTEGER as atmAtmSpvcVpcConnType | |||
| INTEGER as atmAtmSpvcVpcLeafReference | |||
| INTEGER as atmAtmSpvcVpcOperStatus | |||
| RowStatus as atmAtmSpvcVpcRowStatus | |||
| INTEGER as atmAtmSpvcVpcRemoteSelectType | |||
| INTEGER as atmAtmSpvcVpcRemoteVpi | |||
| INTEGER as atmAtmSpvcVpcRetryInterval | |||
| INTEGER as atmAtmSpvcVpcRetryLimit | |||
| INTEGER as atmAtmSpvcVpcRestart | |||
| Integer32 as atmAtmSpvcVpcRetryFailure | |||
| INTEGER as atmAtmSpvcVpcReleaseCause | |||
| OCTET STRING as atmAtmSpvcVpcReleaseDiag | |||
| INTEGER as atmAtmSpvcVpcRelease | |||
| Integer32 as atmAtmSpvcVpcStatsInCellCountHiA | |||
| Integer32 as atmAtmSpvcVpcStatsInCellCountLoA | |||
| Integer32 as atmAtmSpvcVpcStatsOutCellCountHiA | |||
| Integer32 as atmAtmSpvcVpcStatsOutCellCountLoA | |||
| Integer32 as atmAtmSpvcVpcStatsInCellCountHiB | |||
| Integer32 as atmAtmSpvcVpcStatsInCellCountLoB | |||
| Integer32 as atmAtmSpvcVpcStatsOutCellCountHiB | |||
| Integer32 as atmAtmSpvcVpcStatsOutCellCountLoB | |||
| Integer32 as atmAtmSpvcVpcStatsTimer | |||
| INTEGER as atmAtmSpvcVpcStatsFrwdErrCrrctnRateA2B | |||
| INTEGER as atmAtmSpvcVpcStatsFrwdErrCrrctnRateB2A | |||
| Integer32 as atmAtmSpvcVpcStatsInOdometerCellCountHiA | |||
| Integer32 as atmAtmSpvcVpcStatsInOdometerCellCountLoA | |||
| Integer32 as atmAtmSpvcVpcStatsOutOdometerCellCountHiA | |||
| Integer32 as atmAtmSpvcVpcStatsOutOdometerCellCountLoA | |||
| Integer32 as atmAtmSpvcVpcStatsInOdometerCellCountHiB | |||
| Integer32 as atmAtmSpvcVpcStatsInOdometerCellCountLoB | |||
| Integer32 as atmAtmSpvcVpcStatsOutOdometerCellCountHiB | |||
| Integer32 as atmAtmSpvcVpcStatsOutOdometerCellCountLoB | |||
| Integer32 as atmAtmSpvcVpcStatsOdometerTimer | |||
| INTEGER as atmAtmSpvcVpcStatsOdometerReset | |||
| INTEGER as atmAtmSpvcVpcViA | |||
| INTEGER as atmAtmSpvcVpcViB | |||
| Integer32 as atmAtmSpvcVpcStatsCellsDroppedA | |||
| Integer32 as atmAtmSpvcVpcStatsCellsTaggedA | |||
| Integer32 as atmAtmSpvcVpcStatsCellsDroppedB | |||
| Integer32 as atmAtmSpvcVpcStatsCellsTaggedB | |||
| INTEGER as atmAtmSpvcVpcVUNIA | |||
| INTEGER as atmAtmSpvcVpcVUNIB | |||
| INTEGER as atmAtmSpvcVpcTrafficShapingA2B | |||
| INTEGER as atmAtmSpvcVpcTrafficShapingB2A | |||
| INTEGER as atmAtmSpvcVpcPriority | |||
| IntfAtmConnDisplayEntry | |||
| SEQUENCE | |||
| Integer32 as intfAtmPvcConnDisplaySlot | |||
| Integer32 as intfAtmPvcConnDisplayPort | |||
| Integer32 as intfAtmPvcConnDisplayChannel | |||
| INTEGER as intfAtmPvcConnDisplayVpi | |||
| INTEGER as intfAtmPvcConnDisplayVci | |||
| INTEGER as intfAtmPvcConnDisplayFlowType | |||
| Ds3PortStatsEntry | |||
| SEQUENCE | |||
| Integer32 as ds3PortStatsId | |||
| Integer32 as ds3PortStatsTimer | |||
| Integer32 as ds3PortStatsCurrentSEFSs | |||
| Integer32 as ds3PortStatsCurrentLCVs | |||
| Integer32 as ds3PortStatsCurrentLESs | |||
| Ds1PortStatsEntry | |||
| SEQUENCE | |||
| Integer32 as ds1PortStatsId | |||
| Integer32 as ds1PortStatsTimer | |||
| Integer32 as ds1PortStatsCurrentESs | |||
| Integer32 as ds1PortStatsCurrentSESs | |||
| Integer32 as ds1PortStatsCurrentLCVs | |||
| Oc3PortStatsEntry | |||
| SEQUENCE | |||
| Integer32 as oc3PortStatsId | |||
| Integer32 as oc3PortStatsSectionBip8Errs | |||
| Integer32 as oc3PortStatsLineBip8Errs | |||
| Integer32 as oc3PortStatsPathBip8Errs | |||
| Integer32 as oc3PortStatsLineFebeCount | |||
| Integer32 as oc3PortStatsPathFebeCount | |||
| Integer32 as oc3PortStatsTimer | |||
| MsPortStatsEntry | |||
| SEQUENCE | |||
| Integer32 as msPortStatsId | |||
| Integer32 as msPortStatsFrameErrors | |||
| Integer32 as msPortStatsOutOfFrameSeconds | |||
| Integer32 as msPortStatsTimer | |||
| E3PortStatsEntry | |||
| SEQUENCE | |||
| Integer32 as e3PortStatsId | |||
| Integer32 as e3PortStatsTimer | |||
| Integer32 as e3PortStatsCurrentSEFSs | |||
| Integer32 as e3PortStatsCurrentLCVs | |||
| Integer32 as e3PortStatsCurrentLESs | |||
| E1PortStatsEntry | |||
| SEQUENCE | |||
| Integer32 as e1PortStatsId | |||
| Integer32 as e1PortStatsTimer | |||
| Integer32 as e1PortStatsCurrentESs | |||
| Integer32 as e1PortStatsCurrentSESs | |||
| Integer32 as e1PortStatsCurrentLCVs | |||
| EthernetPortStatsEntry | |||
| SEQUENCE | |||
| Integer32 as ethernetPortStatsId | |||
| Integer32 as ethernetPortStatsTimer | |||
| Integer32 as ethernetPortStatsAlignmentErrors | |||
| Integer32 as ethernetPortStatsFCSErrors | |||
| Integer32 as ethernetPortStatsSingleCollisionFrames | |||
| Integer32 as ethernetPortStatsMultipleCollisionFrames | |||
| Integer32 as ethernetPortStatsSQETestErrors | |||
| Integer32 as ethernetPortStatsDeferredTransmissions | |||
| Integer32 as ethernetPortStatsLateCollisions | |||
| Integer32 as ethernetPortStatsExcessiveCollisions | |||
| Integer32 as ethernetPortStatsInternalMacTransmitErrors | |||
| Integer32 as ethernetPortStatsCarrierSenseErrors | |||
| Integer32 as ethernetPortStatsFrameTooLongs | |||
| Integer32 as ethernetPortStatsInternalMacReceiveErrors | |||
| AtmIfStatsEntry | |||
| SEQUENCE | |||
| IntfIndex as atmIfStatsId | |||
| Integer32 as atmIfStatsValidCellsInHi | |||
| Integer32 as atmIfStatsValidCellsInLo | |||
| Integer32 as atmIfStatsErroredCellsIn | |||
| Integer32 as atmIfStatsMismatchedCellsIn | |||
| Integer32 as atmIfStatsNullCellsOutHi | |||
| Integer32 as atmIfStatsNullCellsOutLo | |||
| Integer32 as atmIfStatsValidCellsOutHi | |||
| Integer32 as atmIfStatsValidCellsOutLo | |||
| Integer32 as atmIfStatsTimer | |||
| FrUniStatsEntry | |||
| SEQUENCE | |||
| IntfIndex as frUniStatsId | |||
| INTEGER as frUniStatsTimer | |||
| Integer32 as frUniStatsCellsMismatched | |||
| Integer32 as frUniStatsErroredFrames | |||
| Integer32 as frUniStatsCellsEncodedHi | |||
| Integer32 as frUniStatsCellsEncodedLo | |||
| Integer32 as frUniStatsFramesEncodedHi | |||
| Integer32 as frUniStatsFramesEncodedLo | |||
| Integer32 as frUniStatsCellsDecodedHi | |||
| Integer32 as frUniStatsCellsDecodedLo | |||
| Integer32 as frUniStatsFramesDecodedHi | |||
| Integer32 as frUniStatsFramesDecodedLo | |||
| Integer32 as frUniStatsAAL5Errors | |||
| CirEmIfStatsEntry | |||
| SEQUENCE | |||
| IntfIndex as cirEmIfStatsId | |||
| Integer32 as cirEmIfStatsCellsEncodedHi | |||
| Integer32 as cirEmIfStatsCellsEncodedLo | |||
| Integer32 as cirEmIfStatsCellsDecodedHi | |||
| Integer32 as cirEmIfStatsCellsDecodedLo | |||
| Integer32 as cirEmIfStatsTimer | |||
| VbrIfStatsEntry | |||
| SEQUENCE | |||
| IntfIndex as vbrIfStatsId | |||
| Integer32 as vbrIfStatsCellsEncodedHi | |||
| Integer32 as vbrIfStatsCellsEncodedLo | |||
| Integer32 as vbrIfStatsCellsDecodedHi | |||
| Integer32 as vbrIfStatsCellsDecodedLo | |||
| Integer32 as vbrIfStatsTimer | |||
| FrLmiStatsEntry | |||
| SEQUENCE | |||
| IntfIndex as frLmiStatsId | |||
| Integer32 as frLmiStatsEnqRx | |||
| Integer32 as frLmiStatsEnqTx | |||
| Integer32 as frLmiStatsStatusRx | |||
| Integer32 as frLmiStatsStatusTx | |||
| Integer32 as frLmiStatsAsyncRx | |||
| Integer32 as frLmiStatsAsyncTx | |||
| Integer32 as frLmiStatsPktDisc | |||
| INTEGER as frLmiStatsT391Exp | |||
| INTEGER as frLmiStatsT392Exp | |||
| INTEGER as frLmiStatsLinkReset | |||
| INTEGER as frLmiStatsTimer | |||
| BridgeStatsEntry | |||
| SEQUENCE | |||
| Integer32 as bridgeStatsId | |||
| Integer32 as bridgeStatsTimer | |||
| Integer32 as bridgeStatsBasePortDelayExceededDiscardsHi | |||
| Integer32 as bridgeStatsBasePortDelayExceededDiscardsLo | |||
| Integer32 as bridgeStatsBasePortMtuExceededDiscardsHi | |||
| Integer32 as bridgeStatsBasePortMtuExceededDiscardsLo | |||
| Integer32 as bridgeStatsTpPortInFramesHi | |||
| Integer32 as bridgeStatsTpPortInFramesLo | |||
| Integer32 as bridgeStatsTpPortOutFramesHi | |||
| Integer32 as bridgeStatsTpPortOutFramesLo | |||
| Integer32 as bridgeStatsTpPortInDiscardsHi | |||
| Integer32 as bridgeStatsTpPortInDiscardsLo | |||
| DbCirEmIfStatsEntry | |||
| SEQUENCE | |||
| IntfIndex as dbCirEmIfStatsId | |||
| Integer32 as dbCirEmIfStatsCellsEncodedHi | |||
| Integer32 as dbCirEmIfStatsCellsEncodedLo | |||
| Integer32 as dbCirEmIfStatsCellsDecodedHi | |||
| Integer32 as dbCirEmIfStatsCellsDecodedLo | |||
| Integer32 as dbCirEmIfStatsTimer | |||
| AtmImaStatsEntry | |||
| SEQUENCE | |||
| IntfIndex as atmImaStatsId | |||
| Integer32 as atmImaStatsTimer | |||
| Integer32 as atmImaStatsImaViolations | |||
| Integer32 as atmImaStatsOifAnomalies | |||
| Integer32 as atmImaStatsNeTxNumFailures | |||
| Integer32 as atmImaStatsNeRxNumFailures | |||
| Integer32 as atmImaStatsFeTxNumFailures | |||
| Integer32 as atmImaStatsFeRxNumFailures | |||
| Integer32 as atmImaStatsTxStuffs | |||
| Integer32 as atmImaStatsRxStuffs | |||
| IlmiStatsEntry | |||
| SEQUENCE | |||
| IntfIndex as ilmiStatsId | |||
| Integer32 as ilmiStatsTimer | |||
| Integer32 as ilmiStatsLinkResets | |||
| Integer32 as ilmiStatsAttachPtChanged | |||
| Integer32 as ilmiStatsAttachPtVerified | |||
| Integer32 as ilmiStatsSecureLnkProcInit | |||
| Integer32 as ilmiStatsColdStartRx | |||
| Integer32 as ilmiStatsColdStartTx | |||
| Integer32 as ilmiStatsPduRx | |||
| Integer32 as ilmiStatsPduTx | |||
| Integer32 as ilmiStatsReqTimeouts | |||
| Integer32 as ilmiStatsPacketDisc | |||
| VuniIlmiStatsEntry | |||
| SEQUENCE | |||
| IntfIndex as vuniIlmiStatsId | |||
| INTEGER as vuniIlmiVUNIId | |||
| Integer32 as vuniIlmiStatsTimer | |||
| Integer32 as vuniIlmiStatsLinkResets | |||
| Integer32 as vuniIlmiStatsAttachPtChanged | |||
| Integer32 as vuniIlmiStatsAttachPtVerified | |||
| Integer32 as vuniIlmiStatsSecureLnkProcInit | |||
| Integer32 as vuniIlmiStatsColdStartRx | |||
| Integer32 as vuniIlmiStatsColdStartTx | |||
| Integer32 as vuniIlmiStatsPduRx | |||
| Integer32 as vuniIlmiStatsPduTx | |||
| Integer32 as vuniIlmiStatsReqTimeouts | |||
| Integer32 as vuniIlmiStatsPacketDisc | |||
| INTEGER as vuniResetIlmiStatistics | |||
| AtmPvcVccStatsEntry | |||
| SEQUENCE | |||
| IntfIndex as atmPvcVccStatsIfA | |||
| INTEGER as atmPvcVccStatsVpiA | |||
| INTEGER as atmPvcVccStatsVciA | |||
| IntfIndex as atmPvcVccStatsIfB | |||
| INTEGER as atmPvcVccStatsVpiB | |||
| INTEGER as atmPvcVccStatsVciB | |||
| Integer32 as atmPvcVccStatsInCellCountHiA | |||
| Integer32 as atmPvcVccStatsInCellCountLoA | |||
| Integer32 as atmPvcVccStatsOutCellCountHiA | |||
| Integer32 as atmPvcVccStatsOutCellCountLoA | |||
| Integer32 as atmPvcVccStatsInCellCountHiB | |||
| Integer32 as atmPvcVccStatsInCellCountLoB | |||
| Integer32 as atmPvcVccStatsOutCellCountHiB | |||
| Integer32 as atmPvcVccStatsOutCellCountLoB | |||
| Integer32 as atmPvcVccStatsTimer | |||
| INTEGER as atmPvcVccStatsFrwdErrCrrctnRateA2B | |||
| INTEGER as atmPvcVccStatsFrwdErrCrrctnRateB2A | |||
| Integer32 as atmPvcVccStatsInOdometerCellCountHiA | |||
| Integer32 as atmPvcVccStatsInOdometerCellCountLoA | |||
| Integer32 as atmPvcVccStatsOutOdometerCellCountHiA | |||
| Integer32 as atmPvcVccStatsOutOdometerCellCountLoA | |||
| Integer32 as atmPvcVccStatsInOdometerCellCountHiB | |||
| Integer32 as atmPvcVccStatsInOdometerCellCountLoB | |||
| Integer32 as atmPvcVccStatsOutOdometerCellCountHiB | |||
| Integer32 as atmPvcVccStatsOutOdometerCellCountLoB | |||
| Integer32 as atmPvcVccStatsOdometerTimer | |||
| INTEGER as atmPvcVccStatsOdometerReset | |||
| Integer32 as atmPvcVccStatsOamAisTxA | |||
| Integer32 as atmPvcVccStatsOamAisRxA | |||
| Integer32 as atmPvcVccStatsOamRdiTxA | |||
| Integer32 as atmPvcVccStatsOamRdiRxA | |||
| Integer32 as atmPvcVccStatsOamAisTxB | |||
| Integer32 as atmPvcVccStatsOamAisRxB | |||
| Integer32 as atmPvcVccStatsOamRdiTxB | |||
| Integer32 as atmPvcVccStatsOamRdiRxB | |||
| Integer32 as atmPvcVccStatsCellsDroppedA | |||
| Integer32 as atmPvcVccStatsCellsTaggedA | |||
| Integer32 as atmPvcVccStatsCellsDroppedB | |||
| Integer32 as atmPvcVccStatsCellsTaggedB | |||
| AtmPvcVpcStatsEntry | |||
| SEQUENCE | |||
| IntfIndex as atmPvcVpcStatsIfA | |||
| INTEGER as atmPvcVpcStatsVpiA | |||
| IntfIndex as atmPvcVpcStatsIfB | |||
| INTEGER as atmPvcVpcStatsVpiB | |||
| Integer32 as atmPvcVpcStatsInCellCountHiA | |||
| Integer32 as atmPvcVpcStatsInCellCountLoA | |||
| Integer32 as atmPvcVpcStatsOutCellCountHiA | |||
| Integer32 as atmPvcVpcStatsOutCellCountLoA | |||
| Integer32 as atmPvcVpcStatsInCellCountHiB | |||
| Integer32 as atmPvcVpcStatsInCellCountLoB | |||
| Integer32 as atmPvcVpcStatsOutCellCountHiB | |||
| Integer32 as atmPvcVpcStatsOutCellCountLoB | |||
| Integer32 as atmPvcVpcStatsTimer | |||
| Integer32 as atmPvcVpcStatsInOdometerCellCountHiA | |||
| Integer32 as atmPvcVpcStatsInOdometerCellCountLoA | |||
| Integer32 as atmPvcVpcStatsOutOdometerCellCountHiA | |||
| Integer32 as atmPvcVpcStatsOutOdometerCellCountLoA | |||
| Integer32 as atmPvcVpcStatsInOdometerCellCountHiB | |||
| Integer32 as atmPvcVpcStatsInOdometerCellCountLoB | |||
| Integer32 as atmPvcVpcStatsOutOdometerCellCountHiB | |||
| Integer32 as atmPvcVpcStatsOutOdometerCellCountLoB | |||
| Integer32 as atmPvcVpcStatsOdometerTimer | |||
| INTEGER as atmPvcVpcStatsOdometerReset | |||
| Integer32 as atmPvcVpcStatsOamAisTxA | |||
| Integer32 as atmPvcVpcStatsOamAisRxA | |||
| Integer32 as atmPvcVpcStatsOamRdiTxA | |||
| Integer32 as atmPvcVpcStatsOamRdiRxA | |||
| Integer32 as atmPvcVpcStatsOamAisTxB | |||
| Integer32 as atmPvcVpcStatsOamAisRxB | |||
| Integer32 as atmPvcVpcStatsOamRdiTxB | |||
| Integer32 as atmPvcVpcStatsOamRdiRxB | |||
| Integer32 as atmPvcVpcStatsCellsDroppedA | |||
| Integer32 as atmPvcVpcStatsCellsTaggedA | |||
| Integer32 as atmPvcVpcStatsCellsDroppedB | |||
| Integer32 as atmPvcVpcStatsCellsTaggedB | |||
| AtmSvcVccStatsEntry | |||
| SEQUENCE | |||
| IntfIndex as atmSvcVccStatsIfA | |||
| INTEGER as atmSvcVccStatsVpiA | |||
| INTEGER as atmSvcVccStatsVciA | |||
| IntfIndex as atmSvcVccStatsIfB | |||
| INTEGER as atmSvcVccStatsVpiB | |||
| INTEGER as atmSvcVccStatsVciB | |||
| Integer32 as atmSvcVccStatsInCellCountHiA | |||
| Integer32 as atmSvcVccStatsInCellCountLoA | |||
| Integer32 as atmSvcVccStatsOutCellCountHiA | |||
| Integer32 as atmSvcVccStatsOutCellCountLoA | |||
| Integer32 as atmSvcVccStatsInCellCountHiB | |||
| Integer32 as atmSvcVccStatsInCellCountLoB | |||
| Integer32 as atmSvcVccStatsOutCellCountHiB | |||
| Integer32 as atmSvcVccStatsOutCellCountLoB | |||
| Integer32 as atmSvcVccStatsTimer | |||
| Integer32 as atmSvcVccStatsInOdometerCellCountHiA | |||
| Integer32 as atmSvcVccStatsInOdometerCellCountLoA | |||
| Integer32 as atmSvcVccStatsOutOdometerCellCountHiA | |||
| Integer32 as atmSvcVccStatsOutOdometerCellCountLoA | |||
| Integer32 as atmSvcVccStatsInOdometerCellCountHiB | |||
| Integer32 as atmSvcVccStatsInOdometerCellCountLoB | |||
| Integer32 as atmSvcVccStatsOutOdometerCellCountHiB | |||
| Integer32 as atmSvcVccStatsOutOdometerCellCountLoB | |||
| Integer32 as atmSvcVccStatsOdometerTimer | |||
| INTEGER as atmSvcVccStatsOdometerReset | |||
| Integer32 as atmSvcVccStatsCellsDroppedA | |||
| Integer32 as atmSvcVccStatsCellsTaggedA | |||
| Integer32 as atmSvcVccStatsCellsDroppedB | |||
| Integer32 as atmSvcVccStatsCellsTaggedB | |||
| IpAtmAppPvcVccStatsEntry | |||
| SEQUENCE | |||
| IpAddress as ipAtmAppPvcVccStatsDestAddrA | |||
| IpAddress as ipAtmAppPvcVccStatsSubnetMaskA | |||
| IntfIndex as ipAtmAppPvcVccStatsIfB | |||
| INTEGER as ipAtmAppPvcVccStatsVpiB | |||
| INTEGER as ipAtmAppPvcVccStatsVciB | |||
| Integer32 as ipAtmAppPvcVccStatsInCellCountHiA | |||
| Integer32 as ipAtmAppPvcVccStatsInCellCountLoA | |||
| Integer32 as ipAtmAppPvcVccStatsOutCellCountHiA | |||
| Integer32 as ipAtmAppPvcVccStatsOutCellCountLoA | |||
| Integer32 as ipAtmAppPvcVccStatsFramesInB | |||
| Integer32 as ipAtmAppPvcVccStatsFramesOutB | |||
| Integer32 as ipAtmAppPvcVccStatsInCellCountHiB | |||
| Integer32 as ipAtmAppPvcVccStatsInCellCountLoB | |||
| Integer32 as ipAtmAppPvcVccStatsOutCellCountHiB | |||
| Integer32 as ipAtmAppPvcVccStatsOutCellCountLoB | |||
| Integer32 as ipAtmAppPvcVccStatsTimer | |||
| Integer32 as ipAtmAppPvcVccStatsInOdometerCellCountHiA | |||
| Integer32 as ipAtmAppPvcVccStatsInOdometerCellCountLoA | |||
| Integer32 as ipAtmAppPvcVccStatsOutOdometerCellCountHiA | |||
| Integer32 as ipAtmAppPvcVccStatsOutOdometerCellCountLoA | |||
| Integer32 as ipAtmAppPvcVccStatsOdometerFramesInB | |||
| Integer32 as ipAtmAppPvcVccStatsOdometerFramesOutB | |||
| Integer32 as ipAtmAppPvcVccStatsInOdometerCellCountHiB | |||
| Integer32 as ipAtmAppPvcVccStatsInOdometerCellCountLoB | |||
| Integer32 as ipAtmAppPvcVccStatsOutOdometerCellCountHiB | |||
| Integer32 as ipAtmAppPvcVccStatsOutOdometerCellCountLoB | |||
| Integer32 as ipAtmAppPvcVccStatsOdometerTimer | |||
| INTEGER as ipAtmAppPvcVccStatsOdometerReset | |||
| Integer32 as ipAtmAppPvcVccStatsCellsDroppedB | |||
| Integer32 as ipAtmAppPvcVccStatsCellsTaggedB | |||
| IpAtmAppSvcVccStatsEntry | |||
| SEQUENCE | |||
| IpAddress as ipAtmAppSvcVccStatsDestAddrA | |||
| IpAddress as ipAtmAppSvcVccStatsSubnetMaskA | |||
| IntfIndex as ipAtmAppSvcVccStatsIfB | |||
| INTEGER as ipAtmAppSvcVccStatsVpiB | |||
| INTEGER as ipAtmAppSvcVccStatsVciB | |||
| Integer32 as ipAtmAppSvcVccStatsInCellCountHiA | |||
| Integer32 as ipAtmAppSvcVccStatsInCellCountLoA | |||
| Integer32 as ipAtmAppSvcVccStatsOutCellCountHiA | |||
| Integer32 as ipAtmAppSvcVccStatsOutCellCountLoA | |||
| Integer32 as ipAtmAppSvcVccStatsFramesInB | |||
| Integer32 as ipAtmAppSvcVccStatsFramesOutB | |||
| Integer32 as ipAtmAppSvcVccStatsInCellCountHiB | |||
| Integer32 as ipAtmAppSvcVccStatsInCellCountLoB | |||
| Integer32 as ipAtmAppSvcVccStatsOutCellCountHiB | |||
| Integer32 as ipAtmAppSvcVccStatsOutCellCountLoB | |||
| Integer32 as ipAtmAppSvcVccStatsTimer | |||
| Integer32 as ipAtmAppSvcVccStatsCellsDroppedB | |||
| Integer32 as ipAtmAppSvcVccStatsCellsTaggedB | |||
| CirEmAtmPvcVccStatsEntry | |||
| SEQUENCE | |||
| IntfIndex as cirEmAtmPvcVccStatsIfA | |||
| IntfIndex as cirEmAtmPvcVccStatsIfB | |||
| INTEGER as cirEmAtmPvcVccStatsVpiB | |||
| INTEGER as cirEmAtmPvcVccStatsVciB | |||
| Integer32 as cirEmAtmPvcVccStatsCellsEncodedHiA | |||
| Integer32 as cirEmAtmPvcVccStatsCellsEncodedLoA | |||
| Integer32 as cirEmAtmPvcVccStatsCellsDecodedHiA | |||
| Integer32 as cirEmAtmPvcVccStatsCellsDecodedLoA | |||
| Integer32 as cirEmAtmPvcVccStatsInCellCountHiB | |||
| Integer32 as cirEmAtmPvcVccStatsInCellCountLoB | |||
| Integer32 as cirEmAtmPvcVccStatsOutCellCountHiB | |||
| Integer32 as cirEmAtmPvcVccStatsOutCellCountLoB | |||
| Integer32 as cirEmAtmPvcVccStatsTimer | |||
| Integer32 as cirEmAtmPvcVccStatsOdometerCellsEncodedHiA | |||
| Integer32 as cirEmAtmPvcVccStatsOdometerCellsEncodedLoA | |||
| Integer32 as cirEmAtmPvcVccStatsOdometerCellsDecodedHiA | |||
| Integer32 as cirEmAtmPvcVccStatsOdometerCellsDecodedLoA | |||
| Integer32 as cirEmAtmPvcVccStatsInOdometerCellCountHiB | |||
| Integer32 as cirEmAtmPvcVccStatsInOdometerCellCountLoB | |||
| Integer32 as cirEmAtmPvcVccStatsOutOdometerCellCountHiB | |||
| Integer32 as cirEmAtmPvcVccStatsOutOdometerCellCountLoB | |||
| Integer32 as cirEmAtmPvcVccStatsOdometerTimer | |||
| INTEGER as cirEmAtmPvcVccStatsOdometerReset | |||
| Integer32 as cirEmAtmPvcVccStatsOamAisTx | |||
| Integer32 as cirEmAtmPvcVccStatsOamAisRx | |||
| Integer32 as cirEmAtmPvcVccStatsOamRdiTx | |||
| Integer32 as cirEmAtmPvcVccStatsOamRdiRx | |||
| Integer32 as cirEmAtmPvcVccStatsCellsDroppedB | |||
| Integer32 as cirEmAtmPvcVccStatsCellsTaggedB | |||
| FrAtmPvcVccStatsEntry | |||
| SEQUENCE | |||
| IntfIndex as frAtmPvcVccStatsIfA | |||
| INTEGER as frAtmPvcVccStatsDlciA | |||
| IntfIndex as frAtmPvcVccStatsIfB | |||
| INTEGER as frAtmPvcVccStatsVpiB | |||
| INTEGER as frAtmPvcVccStatsVciB | |||
| Integer32 as frAtmPvcVccStatsCellsEncodedHiA | |||
| Integer32 as frAtmPvcVccStatsCellsEncodedLoA | |||
| Integer32 as frAtmPvcVccStatsCellsDecodedHiA | |||
| Integer32 as frAtmPvcVccStatsCellsDecodedLoA | |||
| Integer32 as frAtmPvcVccStatsInCellCountHiB | |||
| Integer32 as frAtmPvcVccStatsInCellCountLoB | |||
| Integer32 as frAtmPvcVccStatsOutCellCountHiB | |||
| Integer32 as frAtmPvcVccStatsOutCellCountLoB | |||
| Integer32 as frAtmPvcVccStatsTimer | |||
| Integer32 as frAtmPvcVccStatsFramesDroppedA | |||
| Integer32 as frAtmPvcVccStatsOdometerCellsEncodedHiA | |||
| Integer32 as frAtmPvcVccStatsOdometerCellsEncodedLoA | |||
| Integer32 as frAtmPvcVccStatsOdometerCellsDecodedHiA | |||
| Integer32 as frAtmPvcVccStatsOdometerCellsDecodedLoA | |||
| Integer32 as frAtmPvcVccStatsInOdometerCellCountHiB | |||
| Integer32 as frAtmPvcVccStatsInOdometerCellCountLoB | |||
| Integer32 as frAtmPvcVccStatsOutOdometerCellCountHiB | |||
| Integer32 as frAtmPvcVccStatsOutOdometerCellCountLoB | |||
| Integer32 as frAtmPvcVccStatsOdometerTimer | |||
| Integer32 as frAtmPvcVccStatsOdometerFramesDroppedA | |||
| INTEGER as frAtmPvcVccStatsOdometerReset | |||
| Integer32 as frAtmPvcVccStatsOamAisTx | |||
| Integer32 as frAtmPvcVccStatsOamAisRx | |||
| Integer32 as frAtmPvcVccStatsOamRdiTx | |||
| Integer32 as frAtmPvcVccStatsOamRdiRx | |||
| Integer32 as frAtmPvcVccStatsAal5ErrFramesA | |||
| Integer32 as frAtmPvcVccStatsFramesTaggedA | |||
| Integer32 as frAtmPvcVccStatsCellsDroppedB | |||
| Integer32 as frAtmPvcVccStatsCellsTaggedB | |||
| FrFrPvcStatsEntry | |||
| SEQUENCE | |||
| IntfIndex as frFrPvcStatsIfA | |||
| INTEGER as frFrPvcStatsDlciA | |||
| IntfIndex as frFrPvcStatsIfB | |||
| INTEGER as frFrPvcStatsDlciB | |||
| Integer32 as frFrPvcStatsCellsEncodedHiA | |||
| Integer32 as frFrPvcStatsCellsEncodedLoA | |||
| Integer32 as frFrPvcStatsCellsDecodedHiA | |||
| Integer32 as frFrPvcStatsCellsDecodedLoA | |||
| Integer32 as frFrPvcStatsCellsEncodedHiB | |||
| Integer32 as frFrPvcStatsCellsEncodedLoB | |||
| Integer32 as frFrPvcStatsCellsDecodedHiB | |||
| Integer32 as frFrPvcStatsCellsDecodedLoB | |||
| Integer32 as frFrPvcStatsTimer | |||
| Integer32 as frFrPvcStatsFramesDroppedA | |||
| Integer32 as frFrPvcStatsFramesDroppedB | |||
| Integer32 as frFrPvcStatsOdometerCellsEncodedHiA | |||
| Integer32 as frFrPvcStatsOdometerCellsEncodedLoA | |||
| Integer32 as frFrPvcStatsOdometerCellsDecodedHiA | |||
| Integer32 as frFrPvcStatsOdometerCellsDecodedLoA | |||
| Integer32 as frFrPvcStatsOdometerCellsEncodedHiB | |||
| Integer32 as frFrPvcStatsOdometerCellsEncodedLoB | |||
| Integer32 as frFrPvcStatsOdometerCellsDecodedHiB | |||
| Integer32 as frFrPvcStatsOdometerCellsDecodedLoB | |||
| Integer32 as frFrPvcStatsOdometerTimer | |||
| Integer32 as frFrPvcStatsOdometerFramesDroppedA | |||
| Integer32 as frFrPvcStatsOdometerFramesDroppedB | |||
| INTEGER as frFrPvcStatsOdometerReset | |||
| Integer32 as frFrPvcStatsAal5ErrFramesA | |||
| Integer32 as frFrPvcStatsAal5ErrFramesB | |||
| Integer32 as frFrPvcStatsFramesTaggedA | |||
| Integer32 as frFrPvcStatsFramesTaggedB | |||
| VbrAtmPvcVccStatsEntry | |||
| SEQUENCE | |||
| IntfIndex as vbrAtmPvcVccStatsIfA | |||
| IntfIndex as vbrAtmPvcVccStatsIfB | |||
| INTEGER as vbrAtmPvcVccStatsVpiB | |||
| INTEGER as vbrAtmPvcVccStatsVciB | |||
| Integer32 as vbrAtmPvcVccStatsCellsEncodedHiA | |||
| Integer32 as vbrAtmPvcVccStatsCellsEncodedLoA | |||
| Integer32 as vbrAtmPvcVccStatsCellsDecodedHiA | |||
| Integer32 as vbrAtmPvcVccStatsCellsDecodedLoA | |||
| Integer32 as vbrAtmPvcVccStatsInCellCountHiB | |||
| Integer32 as vbrAtmPvcVccStatsInCellCountLoB | |||
| Integer32 as vbrAtmPvcVccStatsOutCellCountHiB | |||
| Integer32 as vbrAtmPvcVccStatsOutCellCountLoB | |||
| Integer32 as vbrAtmPvcVccStatsTimer | |||
| Integer32 as vbrAtmPvcVccStatsOdometerCellsEncodedHiA | |||
| Integer32 as vbrAtmPvcVccStatsOdometerCellsEncodedLoA | |||
| Integer32 as vbrAtmPvcVccStatsOdometerCellsDecodedHiA | |||
| Integer32 as vbrAtmPvcVccStatsOdometerCellsDecodedLoA | |||
| Integer32 as vbrAtmPvcVccStatsInOdometerCellCountHiB | |||
| Integer32 as vbrAtmPvcVccStatsInOdometerCellCountLoB | |||
| Integer32 as vbrAtmPvcVccStatsOutOdometerCellCountHiB | |||
| Integer32 as vbrAtmPvcVccStatsOutOdometerCellCountLoB | |||
| Integer32 as vbrAtmPvcVccStatsOdometerTimer | |||
| INTEGER as vbrAtmPvcVccStatsOdometerReset | |||
| Integer32 as vbrAtmPvcVccStatsOamAisTx | |||
| Integer32 as vbrAtmPvcVccStatsOamAisRx | |||
| Integer32 as vbrAtmPvcVccStatsOamRdiTx | |||
| Integer32 as vbrAtmPvcVccStatsOamRdiRx | |||
| Integer32 as vbrAtmPvcVccStatsCellsDroppedB | |||
| Integer32 as vbrAtmPvcVccStatsCellsTaggedB | |||
| CirEmCirEmPvcStatsEntry | |||
| SEQUENCE | |||
| IntfIndex as cirEmCirEmPvcStatsIfA | |||
| IntfIndex as cirEmCirEmPvcStatsIfB | |||
| Integer32 as cirEmCirEmPvcStatsCellsEncodedHiA | |||
| Integer32 as cirEmCirEmPvcStatsCellsEncodedLoA | |||
| Integer32 as cirEmCirEmPvcStatsCellsDecodedHiA | |||
| Integer32 as cirEmCirEmPvcStatsCellsDecodedLoA | |||
| Integer32 as cirEmCirEmPvcStatsCellsEncodedHiB | |||
| Integer32 as cirEmCirEmPvcStatsCellsEncodedLoB | |||
| Integer32 as cirEmCirEmPvcStatsCellsDecodedHiB | |||
| Integer32 as cirEmCirEmPvcStatsCellsDecodedLoB | |||
| Integer32 as cirEmCirEmPvcStatsTimer | |||
| Integer32 as cirEmCirEmPvcStatsOdometerCellsEncodedHiA | |||
| Integer32 as cirEmCirEmPvcStatsOdometerCellsEncodedLoA | |||
| Integer32 as cirEmCirEmPvcStatsOdometerCellsDecodedHiA | |||
| Integer32 as cirEmCirEmPvcStatsOdometerCellsDecodedLoA | |||
| Integer32 as cirEmCirEmPvcStatsOdometerCellsEncodedHiB | |||
| Integer32 as cirEmCirEmPvcStatsOdometerCellsEncodedLoB | |||
| Integer32 as cirEmCirEmPvcStatsOdometerCellsDecodedHiB | |||
| Integer32 as cirEmCirEmPvcStatsOdometerCellsDecodedLoB | |||
| Integer32 as cirEmCirEmPvcStatsOdometerTimer | |||
| INTEGER as cirEmCirEmPvcStatsOdometerReset | |||
| VbrVbrPvcStatsEntry | |||
| SEQUENCE | |||
| IntfIndex as vbrVbrPvcStatsIfA | |||
| IntfIndex as vbrVbrPvcStatsIfB | |||
| Integer32 as vbrVbrPvcStatsCellsEncodedHiA | |||
| Integer32 as vbrVbrPvcStatsCellsEncodedLoA | |||
| Integer32 as vbrVbrPvcStatsCellsDecodedHiA | |||
| Integer32 as vbrVbrPvcStatsCellsDecodedLoA | |||
| Integer32 as vbrVbrPvcStatsCellsEncodedHiB | |||
| Integer32 as vbrVbrPvcStatsCellsEncodedLoB | |||
| Integer32 as vbrVbrPvcStatsCellsDecodedHiB | |||
| Integer32 as vbrVbrPvcStatsCellsDecodedLoB | |||
| Integer32 as vbrVbrPvcStatsTimer | |||
| Integer32 as vbrVbrPvcStatsOdometerCellsEncodedHiA | |||
| Integer32 as vbrVbrPvcStatsOdometerCellsEncodedLoA | |||
| Integer32 as vbrVbrPvcStatsOdometerCellsDecodedHiA | |||
| Integer32 as vbrVbrPvcStatsOdometerCellsDecodedLoA | |||
| Integer32 as vbrVbrPvcStatsOdometerCellsEncodedHiB | |||
| Integer32 as vbrVbrPvcStatsOdometerCellsEncodedLoB | |||
| Integer32 as vbrVbrPvcStatsOdometerCellsDecodedHiB | |||
| Integer32 as vbrVbrPvcStatsOdometerCellsDecodedLoB | |||
| Integer32 as vbrVbrPvcStatsOdometerTimer | |||
| INTEGER as vbrVbrPvcStatsOdometerReset | |||
| BridgeBridgePvcStatsEntry | |||
| SEQUENCE | |||
| IntfIndex as bridgeBridgePvcStatsIfA | |||
| IntfIndex as bridgeBridgePvcStatsIfB | |||
| Integer32 as bridgeBridgePvcStatsCellsEncodedHiA | |||
| Integer32 as bridgeBridgePvcStatsCellsEncodedLoA | |||
| Integer32 as bridgeBridgePvcStatsCellsDecodedHiA | |||
| Integer32 as bridgeBridgePvcStatsCellsDecodedLoA | |||
| Integer32 as bridgeBridgePvcStatsCellsEncodedHiB | |||
| Integer32 as bridgeBridgePvcStatsCellsEncodedLoB | |||
| Integer32 as bridgeBridgePvcStatsCellsDecodedHiB | |||
| Integer32 as bridgeBridgePvcStatsCellsDecodedLoB | |||
| Integer32 as bridgeBridgePvcStatsTimer | |||
| Integer32 as bridgeBridgePvcStatsOdometerCellsEncodedHiA | |||
| Integer32 as bridgeBridgePvcStatsOdometerCellsEncodedLoA | |||
| Integer32 as bridgeBridgePvcStatsOdometerCellsDecodedHiA | |||
| Integer32 as bridgeBridgePvcStatsOdometerCellsDecodedLoA | |||
| Integer32 as bridgeBridgePvcStatsOdometerCellsEncodedHiB | |||
| Integer32 as bridgeBridgePvcStatsOdometerCellsEncodedLoB | |||
| Integer32 as bridgeBridgePvcStatsOdometerCellsDecodedHiB | |||
| Integer32 as bridgeBridgePvcStatsOdometerCellsDecodedLoB | |||
| Integer32 as bridgeBridgePvcStatsOdometerTimer | |||
| INTEGER as bridgeBridgePvcStatsOdometerReset | |||
| BridgeAtmPvcVccStatsEntry | |||
| SEQUENCE | |||
| IntfIndex as bridgeAtmPvcVccStatsIfA | |||
| IntfIndex as bridgeAtmPvcVccStatsIfB | |||
| INTEGER as bridgeAtmPvcVccStatsVpiB | |||
| INTEGER as bridgeAtmPvcVccStatsVciB | |||
| Integer32 as bridgeAtmPvcVccStatsCellsEncodedHiA | |||
| Integer32 as bridgeAtmPvcVccStatsCellsEncodedLoA | |||
| Integer32 as bridgeAtmPvcVccStatsCellsDecodedHiA | |||
| Integer32 as bridgeAtmPvcVccStatsCellsDecodedLoA | |||
| Integer32 as bridgeAtmPvcVccStatsInCellCountHiB | |||
| Integer32 as bridgeAtmPvcVccStatsInCellCountLoB | |||
| Integer32 as bridgeAtmPvcVccStatsOutCellCountHiB | |||
| Integer32 as bridgeAtmPvcVccStatsOutCellCountLoB | |||
| Integer32 as bridgeAtmPvcVccStatsTimer | |||
| Integer32 as bridgeAtmPvcVccStatsOdometerCellsEncodedHiA | |||
| Integer32 as bridgeAtmPvcVccStatsOdometerCellsEncodedLoA | |||
| Integer32 as bridgeAtmPvcVccStatsOdometerCellsDecodedHiA | |||
| Integer32 as bridgeAtmPvcVccStatsOdometerCellsDecodedLoA | |||
| Integer32 as bridgeAtmPvcVccStatsInOdometerCellCountHiB | |||
| Integer32 as bridgeAtmPvcVccStatsInOdometerCellCountLoB | |||
| Integer32 as bridgeAtmPvcVccStatsOutOdometerCellCountHiB | |||
| Integer32 as bridgeAtmPvcVccStatsOutOdometerCellCountLoB | |||
| Integer32 as bridgeAtmPvcVccStatsOdometerTimer | |||
| INTEGER as bridgeAtmPvcVccStatsOdometerReset | |||
| Integer32 as bridgeAtmPvcVccStatsOamAisTx | |||
| Integer32 as bridgeAtmPvcVccStatsOamAisRx | |||
| Integer32 as bridgeAtmPvcVccStatsOamRdiTx | |||
| Integer32 as bridgeAtmPvcVccStatsOamRdiRx | |||
| Integer32 as bridgeAtmPvcVccStatsCellsDroppedB | |||
| Integer32 as bridgeAtmPvcVccStatsCellsTaggedB | |||
| CirEmAtmSpvcVccStatsEntry | |||
| SEQUENCE | |||
| IntfIndex as cirEmAtmSpvcVccStatsIfA | |||
| IntfIndex as cirEmAtmSpvcVccStatsIfB | |||
| INTEGER as cirEmAtmSpvcVccStatsVpiB | |||
| INTEGER as cirEmAtmSpvcVccStatsVciB | |||
| Integer32 as cirEmAtmSpvcVccStatsCellsEncodedHiA | |||
| Integer32 as cirEmAtmSpvcVccStatsCellsEncodedLoA | |||
| Integer32 as cirEmAtmSpvcVccStatsCellsDecodedHiA | |||
| Integer32 as cirEmAtmSpvcVccStatsCellsDecodedLoA | |||
| Integer32 as cirEmAtmSpvcVccStatsInCellCountHiB | |||
| Integer32 as cirEmAtmSpvcVccStatsInCellCountLoB | |||
| Integer32 as cirEmAtmSpvcVccStatsOutCellCountHiB | |||
| Integer32 as cirEmAtmSpvcVccStatsOutCellCountLoB | |||
| Integer32 as cirEmAtmSpvcVccStatsTimer | |||
| Integer32 as cirEmAtmSpvcVccStatsOdometerCellsEncodedHiA | |||
| Integer32 as cirEmAtmSpvcVccStatsOdometerCellsEncodedLoA | |||
| Integer32 as cirEmAtmSpvcVccStatsOdometerCellsDecodedHiA | |||
| Integer32 as cirEmAtmSpvcVccStatsOdometerCellsDecodedLoA | |||
| Integer32 as cirEmAtmSpvcVccStatsInOdometerCellCountHiB | |||
| Integer32 as cirEmAtmSpvcVccStatsInOdometerCellCountLoB | |||
| Integer32 as cirEmAtmSpvcVccStatsOutOdometerCellCountHiB | |||
| Integer32 as cirEmAtmSpvcVccStatsOutOdometerCellCountLoB | |||
| Integer32 as cirEmAtmSpvcVccStatsOdometerTimer | |||
| INTEGER as cirEmAtmSpvcVccStatsOdometerReset | |||
| Integer32 as cirEmAtmSpvcVccStatsCellsDroppedB | |||
| Integer32 as cirEmAtmSpvcVccStatsCellsTaggedB | |||
| VbrAtmSpvcVccStatsEntry | |||
| SEQUENCE | |||
| IntfIndex as vbrAtmSpvcVccStatsIfA | |||
| IntfIndex as vbrAtmSpvcVccStatsIfB | |||
| INTEGER as vbrAtmSpvcVccStatsVpiB | |||
| INTEGER as vbrAtmSpvcVccStatsVciB | |||
| Integer32 as vbrAtmSpvcVccStatsCellsEncodedHiA | |||
| Integer32 as vbrAtmSpvcVccStatsCellsEncodedLoA | |||
| Integer32 as vbrAtmSpvcVccStatsCellsDecodedHiA | |||
| Integer32 as vbrAtmSpvcVccStatsCellsDecodedLoA | |||
| Integer32 as vbrAtmSpvcVccStatsInCellCountHiB | |||
| Integer32 as vbrAtmSpvcVccStatsInCellCountLoB | |||
| Integer32 as vbrAtmSpvcVccStatsOutCellCountHiB | |||
| Integer32 as vbrAtmSpvcVccStatsOutCellCountLoB | |||
| Integer32 as vbrAtmSpvcVccStatsTimer | |||
| Integer32 as vbrAtmSpvcVccStatsOdometerCellsEncodedHiA | |||
| Integer32 as vbrAtmSpvcVccStatsOdometerCellsEncodedLoA | |||
| Integer32 as vbrAtmSpvcVccStatsOdometerCellsDecodedHiA | |||
| Integer32 as vbrAtmSpvcVccStatsOdometerCellsDecodedLoA | |||
| Integer32 as vbrAtmSpvcVccStatsInOdometerCellCountHiB | |||
| Integer32 as vbrAtmSpvcVccStatsInOdometerCellCountLoB | |||
| Integer32 as vbrAtmSpvcVccStatsOutOdometerCellCountHiB | |||
| Integer32 as vbrAtmSpvcVccStatsOutOdometerCellCountLoB | |||
| Integer32 as vbrAtmSpvcVccStatsOdometerTimer | |||
| INTEGER as vbrAtmSpvcVccStatsOdometerReset | |||
| Integer32 as vbrAtmSpvcVccStatsCellsDroppedB | |||
| Integer32 as vbrAtmSpvcVccStatsCellsTaggedB | |||
| AtmSpvcVccStatsEntry | |||
| SEQUENCE | |||
| IntfIndex as atmSpvcVccStatsIfA | |||
| INTEGER as atmSpvcVccStatsVpiA | |||
| INTEGER as atmSpvcVccStatsVciA | |||
| IntfIndex as atmSpvcVccStatsIfB | |||
| INTEGER as atmSpvcVccStatsVpiB | |||
| INTEGER as atmSpvcVccStatsVciB | |||
| Integer32 as atmSpvcVccStatsInCellCountHiA | |||
| Integer32 as atmSpvcVccStatsInCellCountLoA | |||
| Integer32 as atmSpvcVccStatsOutCellCountHiA | |||
| Integer32 as atmSpvcVccStatsOutCellCountLoA | |||
| Integer32 as atmSpvcVccStatsInCellCountHiB | |||
| Integer32 as atmSpvcVccStatsInCellCountLoB | |||
| Integer32 as atmSpvcVccStatsOutCellCountHiB | |||
| Integer32 as atmSpvcVccStatsOutCellCountLoB | |||
| Integer32 as atmSpvcVccStatsTimer | |||
| INTEGER as atmSpvcVccStatsFrwdErrCrrctnRateA2B | |||
| INTEGER as atmSpvcVccStatsFrwdErrCrrctnRateB2A | |||
| Integer32 as atmSpvcVccStatsInOdometerCellCountHiA | |||
| Integer32 as atmSpvcVccStatsInOdometerCellCountLoA | |||
| Integer32 as atmSpvcVccStatsOutOdometerCellCountHiA | |||
| Integer32 as atmSpvcVccStatsOutOdometerCellCountLoA | |||
| Integer32 as atmSpvcVccStatsInOdometerCellCountHiB | |||
| Integer32 as atmSpvcVccStatsInOdometerCellCountLoB | |||
| Integer32 as atmSpvcVccStatsOutOdometerCellCountHiB | |||
| Integer32 as atmSpvcVccStatsOutOdometerCellCountLoB | |||
| Integer32 as atmSpvcVccStatsOdometerTimer | |||
| INTEGER as atmSpvcVccStatsOdometerReset | |||
| Integer32 as atmSpvcVccStatsCellsDroppedA | |||
| Integer32 as atmSpvcVccStatsCellsTaggedA | |||
| Integer32 as atmSpvcVccStatsCellsDroppedB | |||
| Integer32 as atmSpvcVccStatsCellsTaggedB | |||
| AtmArpEntry | |||
| SEQUENCE | |||
| IpAddress as atmArpIpAddress | |||
| OCTET STRING as atmArpAtmAddress | |||
| INTEGER as atmArpAddrType | |||
| INTEGER as atmArpEntryState | |||
| RowStatus as atmArpEntryRowStatus | |||
| AppIpRouteEntry | |||
| SEQUENCE | |||
| IpAddress as appIpRouteDest | |||
| IpAddress as appIpRouteMask | |||
| INTEGER as appIpRouteMetric1 | |||
| IpAddress as appIpRouteNextHop | |||
| INTEGER as appIpRouteState | |||
| IispCbrRoutEntry | |||
| SEQUENCE | |||
| Integer32 as iispCbrRoutLength | |||
| OCTET STRING as iispCbrRoutNsapAddr | |||
| IntfIndex as iispCbrRoutIfIndex | |||
| RowStatus as iispCbrRoutRowStatus | |||
| IispVbrRoutEntry | |||
| SEQUENCE | |||
| Integer32 as iispVbrRoutLength | |||
| OCTET STRING as iispVbrRoutNsapAddr | |||
| IntfIndex as iispVbrRoutIfIndex | |||
| RowStatus as iispVbrRoutRowStatus | |||
| IispCbrRouteEntry | |||
| SEQUENCE | |||
| Integer32 as iispCbrRouteLength | |||
| OCTET STRING as iispCbrRouteNsapAddr | |||
| IntfIndex as iispCbrRouteIfIndex | |||
| RowStatus as iispCbrRouteRowStatus | |||
| INTEGER as iispCbrRouteIfVuniId | |||
| Integer32 as iispCbrRouteDest | |||
| Integer32 as iispCbrRouteType | |||
| IispVbrRouteEntry | |||
| SEQUENCE | |||
| Integer32 as iispVbrRouteLength | |||
| OCTET STRING as iispVbrRouteNsapAddr | |||
| IntfIndex as iispVbrRouteIfIndex | |||
| RowStatus as iispVbrRouteRowStatus | |||
| INTEGER as iispVbrRouteIfVuniId | |||
| Integer32 as iispVbrRouteDest | |||
| Integer32 as iispVbrRouteType | |||
| FwReleaseEntry | |||
| SEQUENCE | |||
| INTEGER as fwReleaseSlot | |||
| OCTET STRING as fwReleaseRunning | |||
| OCTET STRING as fwReleaseEpromVersion | |||
| OCTET STRING as fwReleaseCurrentVersion | |||
| OCTET STRING as fwReleaseNextVersion | |||
| INTEGER as fwReleaseUpdate | |||
| INTEGER as fwReleaseUpgrade | |||
| MsgPoolViewEntry | |||
| SEQUENCE | |||
| Integer32 as msgPoolViewIndex | |||
| Integer32 as msgPoolViewTskId | |||
| DisplayString as msgPoolViewTskName | |||
| Integer32 as msgPoolViewMsgCmd | |||
| Arp1Entry | |||
| SEQUENCE | |||
| INTEGER as arp1CardSlot | |||
| INTEGER as arp1BridgeGroupNum | |||
| IpAddress as arp1IpAddress | |||
| OCTET STRING as arp1PhysicalAddr | |||
| Integer32 as arp1EntryAge | |||
| Arp2Entry | |||
| SEQUENCE | |||
| INTEGER as arp2CardSlot | |||
| INTEGER as arp2BridgeGroupNum | |||
| OCTET STRING as arp2PhysicalAddr | |||
| IpAddress as arp2IpAddress | |||
| Integer32 as arp2EntryAge | |||
| BridgeCacheEntry | |||
| SEQUENCE | |||
| INTEGER as bridgeCacheCardSlot | |||
| INTEGER as bridgeCacheBridgeGroupNum | |||
| OCTET STRING as bridgeCachePhysicalAddr | |||
| INTEGER as bridgeCacheType | |||
| INTEGER as bridgeCacheSourcePort | |||
| Integer32 as bridgeCacheEntryAge | |||
| OamActDeactEntry | |||
| SEQUENCE | |||
| IntfIndex as oamActDeactIfB | |||
| INTEGER as oamActDeactVpiB | |||
| INTEGER as oamActDeactVciB | |||
| INTEGER as oamActDeactFuncType | |||
| INTEGER as oamActDeactDirFlow | |||
| INTEGER as oamActDeactFlowType | |||
| INTEGER as oamActDeactBlkSizeAB | |||
| INTEGER as oamActDeactBlkSizeBA | |||
| INTEGER as oamActDeactStsSrcPointEteCC | |||
| INTEGER as oamActDeactStsSnkPointEteCC | |||
| INTEGER as oamActDeactRsltPrevReq | |||
| RowStatus as oamActDeactRowStatus | |||
| INTEGER as oamActDeactStsSrcPointEtePM | |||
| INTEGER as oamActDeactStsSnkPointEtePM | |||
| INTEGER as oamActDeactStsSrcPointEtePMBR | |||
| INTEGER as oamActDeactStsSnkPointEtePMBR | |||
| INTEGER as oamActDeactBRBlockError | |||
| INTEGER as oamActDeactBRLostInsertedCell | |||
| INTEGER as oamActDeactBRMisInsertedCell | |||
| INTEGER as oamActDeactStsSrcPointSegPM | |||
| INTEGER as oamActDeactStsSnkPointSegPM | |||
| INTEGER as oamActDeactStsSrcPointSegPMBR | |||
| INTEGER as oamActDeactStsSnkPointSegPMBR | |||
| INTEGER as oamActDeactStsSrcPointSegCC | |||
| INTEGER as oamActDeactStsSnkPointSegCC | |||
| OamLoopbackEntry | |||
| SEQUENCE | |||
| IntfIndex as oamLpbkIfB | |||
| INTEGER as oamLpbkVpiB | |||
| INTEGER as oamLpbkVciB | |||
| INTEGER as oamLoopbackType | |||
| OCTET STRING as oamLpbkLocationID | |||
| INTEGER as oamLpbkAction | |||
| INTEGER as oamLpbkStatus | |||
| Integer32 as oamLpbkTxCount | |||
| Integer32 as oamLpbkRxCount | |||
| Integer32 as oamLpbkMismatchCount | |||
| INTEGER as oamLpbkTimeout | |||
| ViprRouterConfigEntry | |||
| SEQUENCE | |||
| Integer32 as viprSlot | |||
| INTEGER as viprRouterId | |||
| DisplayString as viprRouterName | |||
| INTEGER as viprRouterNoOfInterfaces | |||
| INTEGER as viprRouterNoOfRoutes | |||
| INTEGER as viprRouterAdminStatus | |||
| INTEGER as viprRouterOperStatus | |||
| Integer32 as viprRouterInitTmr | |||
| Integer32 as viprRouterDisabWarnTmr | |||
| Integer32 as viprRouterShutDwnWarnTmr | |||
| INTEGER as viprRouterDisableWarning | |||
| INTEGER as viprRouterDisableReason | |||
| RowStatus as viprRouterRowStatus | |||
| ViprIntfConfigEntry | |||
| SEQUENCE | |||
| Integer32 as viprIntfId | |||
| IpAddress as viprIntfIPAddress | |||
| IpAddress as viprIntfIPNetMask | |||
| INTEGER as viprIntfAdminStatus | |||
| INTEGER as viprIntfOperStatus | |||
| Integer32 as viprIntfInitTmr | |||
| Integer32 as viprIntfDisabWarnTmr | |||
| Integer32 as viprIntfShutDwnWarnTmr | |||
| INTEGER as viprIntfDisableWarning | |||
| INTEGER as viprIntfDisableReason | |||
| INTEGER as viprIntfRipVersion | |||
| INTEGER as viprIntfRipMode | |||
| RowStatus as viprIntfRowStatus | |||
| INTEGER as viprIntfRipLineType | |||
| DisplayString as viprIntfAuthPasswd | |||
| ViprSubChnlConfigEntry | |||
| SEQUENCE | |||
| Integer32 as viprSubChnlId | |||
| IntfIndex as viprSubChnlIntfIndex | |||
| INTEGER as viprSubChnlTrafficType | |||
| INTEGER as viprSubChnlLlcEncapType | |||
| INTEGER as viprSubChnlMacEncapType | |||
| INTEGER as viprSubChnlTosFeature | |||
| INTEGER as viprSubChnlTosValue | |||
| INTEGER as viprSubChnlTosMask | |||
| INTEGER as viprSubChnlVpiDlci | |||
| INTEGER as viprSubChnlVci | |||
| INTEGER as viprSubChnlSarType | |||
| INTEGER as viprSubChnlServiceType | |||
| INTEGER as viprSubChnlFwdErrCorrection | |||
| INTEGER as viprSubChnlInterworkingType | |||
| Integer32 as viprSubChnlFrameSize | |||
| Integer32 as viprSubChnlComBurstSize | |||
| Integer32 as viprSubChnlExcessBurstSize | |||
| Integer32 as viprSubChnlCommitedInfoRate | |||
| INTEGER as viprSubChnlTimeInterval | |||
| Integer32 as viprSubChnlAtmPeakCellRate | |||
| Integer32 as viprSubChnlAtmSustainedCellRate | |||
| Integer32 as viprSubChnlAtmMaxBurstSize | |||
| Integer32 as viprSubChnlFrPeakCellRate | |||
| Integer32 as viprSubChnlFrSustainedCellRate | |||
| Integer32 as viprSubChnlFrMaxBurstSize | |||
| INTEGER as viprSubChnlFlowType | |||
| INTEGER as viprSubChnlAdminStatus | |||
| INTEGER as viprSubChnlOperStatus | |||
| Integer32 as viprSubChnlInitTmr | |||
| Integer32 as viprSubChnlDisabWarnTmr | |||
| Integer32 as viprSubChnlShutDwnWarnTmr | |||
| INTEGER as viprSubChnlDisableWarning | |||
| INTEGER as viprSubChnlDisableReason | |||
| RowStatus as viprSubChnlRowStatus | |||
| IpAddress as viprSubChnlImIpAddr | |||
| IpAddress as viprSubChnlImMask | |||
| INTEGER as viprSubChnlViB | |||
| INTEGER as viprSubChnlVUNIB | |||
| INTEGER as viprSubChnlTrafficShaping | |||
| INTEGER as viprSubChnlAtmOamStatus | |||
| ViprRouteConfigEntry | |||
| SEQUENCE | |||
| Integer32 as viprRouteId | |||
| IpAddress as viprRouteIPAddress | |||
| IpAddress as viprRouteIPNetMask | |||
| IpAddress as viprRouteDestAddress | |||
| IpAddress as viprRouteGatewayAddress | |||
| INTEGER as viprRouteServiceType | |||
| Integer32 as viprRouteMetric | |||
| INTEGER as viprRouteAdminStatus | |||
| INTEGER as viprRouteOperStatus | |||
| Integer32 as viprRouteInitTmr | |||
| Integer32 as viprRouteDisabWarnTmr | |||
| Integer32 as viprRouteShutDwnWarnTmr | |||
| INTEGER as viprRouteDisableWarning | |||
| INTEGER as viprRouteDisableReason | |||
| RowStatus as viprRouteRowStatus | |||
| IpAddress as viprRouteDestMask | |||
| ViprRoutingConfigEntry | |||
| SEQUENCE | |||
| INTEGER as viprRoutingCommand | |||
| IpAddress as viprRoutingIPAddress | |||
| IpAddress as viprRoutingIPNetMask | |||
| IpAddress as viprRoutingDestAddress | |||
| IpAddress as viprRoutingGatewayAddress | |||
| INTEGER as viprRoutingServiceType | |||
| INTEGER as viprRoutingType | |||
| Integer32 as viprRoutingMetric | |||
| IpAddress as viprRoutingDestMask | |||
| Integer32 as viprRoutingAge | |||
| Integer32 as viprRoutingIndex | |||
| ViprArpConfigEntry | |||
| SEQUENCE | |||
| INTEGER as viprArpCommand | |||
| IpAddress as viprArpIPAddress | |||
| OCTET STRING as viprArpHwAddress | |||
| Integer32 as viprArpEntryAge | |||
| IpAddress as viprArpInterfaceIPAddress | |||
| IpAddress as viprArpInterfaceIPMask | |||
| INTEGER as viprArpInterfaceServiceType | |||
| Integer32 as viprArpIndex | |||
| ViprPingConfigEntry | |||
| SEQUENCE | |||
| IpAddress as ipAddr | |||
| INTEGER as pingStatus | |||
| ViprRipConfigEntry | |||
| SEQUENCE | |||
| INTEGER as viprRipUpdateInt | |||
| ViprVpnStatsEntry | |||
| SEQUENCE | |||
| Integer32 as viprVpnStatsTimer | |||
| Integer32 as viprVpnStatsIcmpOutEchoRPs | |||
| Integer32 as viprVpnStatsIcmpOutDestURs | |||
| Integer32 as viprVpnStatsIcmpOutSrcQ | |||
| Integer32 as viprVpnStatsIcmpOutRedirects | |||
| Integer32 as viprVpnStatsIcmpOutEchoRQs | |||
| Integer32 as viprVpnStatsIcmpOutTimeXs | |||
| Integer32 as viprVpnStatsIcmpOutParamps | |||
| Integer32 as viprVpnStatsIcmpOutTimeRQs | |||
| Integer32 as viprVpnStatsIcmpOutTimeRPs | |||
| Integer32 as viprVpnStatsIcmpOutInfoRQs | |||
| Integer32 as viprVpnStatsIcmpOutInfoRPs | |||
| Integer32 as viprVpnStatsIcmpOutMaskRQs | |||
| Integer32 as viprVpnStatsIcmpOutMaskRPs | |||
| Integer32 as viprVpnStatsIcmpOutErrors | |||
| Integer32 as viprVpnStatsIcmpInErrors | |||
| Integer32 as viprVpnStatsIcmpInEchoRQs | |||
| Integer32 as viprVpnStatsIcmpInAddrMasks | |||
| Integer32 as viprVpnStatsIcmpInAddrMaskReps | |||
| Integer32 as viprVpnStatsIcmpInEchoReps | |||
| Integer32 as viprVpnStatsIcmpInDestUnreachs | |||
| Integer32 as viprVpnStatsIcmpInSrcQuenchs | |||
| Integer32 as viprVpnStatsIcmpInTimeExcds | |||
| Integer32 as viprVpnStatsIcmpInParamProbs | |||
| Integer32 as viprVpnStatsIcmpInTimeStamps | |||
| Integer32 as viprVpnStatsIcmpInTimeStampsReps | |||
| ViprStatsEntry | |||
| SEQUENCE | |||
| INTEGER as viprStatsReset | |||
| Integer32 as viprStatsPacketsRxHi | |||
| Integer32 as viprStatsPacketsRxLo | |||
| Integer32 as viprStatsPacketsTxHi | |||
| Integer32 as viprStatsPacketsTxLo | |||
| Integer32 as viprStatsMismatchCrcHi | |||
| Integer32 as viprStatsMismatchCrcLo | |||
| Integer32 as viprStatsInsufficientPcktsHi | |||
| Integer32 as viprStatsInsufficientPcktsLo | |||
| Integer32 as viprStatsExceedAal5CellsHi | |||
| Integer32 as viprStatsExceedAal5CellsLo | |||
| Integer32 as viprStatsPrototypeErrorsHi | |||
| Integer32 as viprStatsPrototypeErrorsLo | |||
| Integer32 as viprStatsArpProtoRxHi | |||
| Integer32 as viprStatsArpProtoRxLo | |||
| Integer32 as viprStatsIPInHdrErrorsHi | |||
| Integer32 as viprStatsIPInHdrErrorsLo | |||
| Integer32 as viprStatsIPInAddrErrorsHi | |||
| Integer32 as viprStatsIPInAddrErrorsLo | |||
| ViprSubChnlStatsEntry | |||
| SEQUENCE | |||
| Integer32 as viprSubChnlStatsInCellCountHiA | |||
| Integer32 as viprSubChnlStatsInCellCountLoA | |||
| Integer32 as viprSubChnlStatsOutCellCountHiA | |||
| Integer32 as viprSubChnlStatsOutCellCountLoA | |||
| Integer32 as viprSubChnlStatsInCellCountHiB | |||
| Integer32 as viprSubChnlStatsInCellCountLoB | |||
| Integer32 as viprSubChnlStatsOutCellCountHiB | |||
| Integer32 as viprSubChnlStatsOutCellCountLoB | |||
| Integer32 as viprSubChnlStatsTimer | |||
| Integer32 as viprSubChnlStatsInOdometerCellCountHiA | |||
| Integer32 as viprSubChnlStatsInOdometerCellCountLoA | |||
| Integer32 as viprSubChnlStatsOutOdometerCellCountHiA | |||
| Integer32 as viprSubChnlStatsOutOdometerCellCountLoA | |||
| Integer32 as viprSubChnlStatsInOdometerCellCountHiB | |||
| Integer32 as viprSubChnlStatsInOdometerCellCountLoB | |||
| Integer32 as viprSubChnlStatsOutOdometerCellCountHiB | |||
| Integer32 as viprSubChnlStatsOutOdometerCellCountLoB | |||
| Integer32 as viprSubChnlStatsOdometerTimer | |||
| INTEGER as viprSubChnlStatsOdometerReset | |||
| Integer32 as viprSubChnlStatsCellsDroppedB | |||
| Integer32 as viprSubChnlStatsCellsTaggedB | |||
| VirtualIntfStatsEntry | |||
| SEQUENCE | |||
| IntfIndex as virtualIntfStatsIf | |||
| INTEGER as virtualIntfStatsVi | |||
| Integer32 as virtualIntfStatsEgrCellCount | |||
| Integer32 as virtualIntfStatsTimer | |||
| INTEGER as virtualIntfStatsReset | |||
| CardFwVerEntry | |||
| SEQUENCE | |||
| INTEGER as cardFwVerSlot | |||
| Integer32 as cardFwVerType | |||
| OCTET STRING as cardFwVerCurrent | |||
| Integer32 as cardFwVerCurrentIsDefault | |||
| OCTET STRING as cardFwVerNext | |||
| INTEGER as cardFwVerNextIsDefault | |||
| INTEGER as cardFwDnldStatus | |||
| Integer32 as cardFwRetries | |||
| FwDriverEntry | |||
| SEQUENCE | |||
| Integer32 as fwSlotId | |||
| Integer32 as fwDriverType | |||
| Integer32 as fwIsDefault | |||
| OCTET STRING as fwDriverName | |||
| Integer32 as fwDriverFrn | |||
| Integer32 as fwDriverSize | |||
| Integer32 as fwDriverChecksum | |||
| AtmTrunkingRemoteIWFEntry | |||
| SEQUENCE | |||
| Integer32 as atmTrunkingRemoteIWFIdentifier | |||
| OCTET STRING as atmTrunkingRemoteIWFAddress | |||
| INTEGER as atmTrunkingRemoteIWFTrnkMode | |||
| INTEGER as atmTrunkingRemoteIWFAdminStatus | |||
| RowStatus as atmTrunkingRemoteIWFRowStatus | |||
| AtmTrunkingSigVccEntry | |||
| SEQUENCE | |||
| Integer32 as atmTrunkingSigVccRmtIWFIdentifier | |||
| INTEGER as atmTrunkingSigVccIdentifier | |||
| IntfIndex as atmTrunkingSigVccOutgoingIfIndex | |||
| INTEGER as atmTrunkingSigVccOutgoingVpi | |||
| INTEGER as atmTrunkingSigVccOutgoingVci | |||
| INTEGER as atmTrunkingSigVccOwner | |||
| Integer32 as atmTrunkingSigVccInactiveTimer | |||
| INTEGER as atmTrunkingSigVccType | |||
| INTEGER as atmTrunkingSigVccSignaling | |||
| Integer32 as atmTrunkingSigVccFwPcr01 | |||
| Integer32 as atmTrunkingSigVccBwPcr01 | |||
| Integer32 as atmTrunkingSigVccFwScr01 | |||
| Integer32 as atmTrunkingSigVccBwScr01 | |||
| Integer32 as atmTrunkingSigVccFwMbs01 | |||
| Integer32 as atmTrunkingSigVccBwMbs01 | |||
| Integer32 as atmTrunkingSigVccMaxAal2Vcc | |||
| Integer32 as atmTrunkingSigVccActiveAal2Vcc | |||
| Integer32 as atmTrunkingSigVccOperStatus | |||
| RowStatus as atmTrunkingSigVccRowStatus | |||
| INTEGER as atmTrunkingSigVccViB | |||
| INTEGER as atmTrunkingSigVccVUNIB | |||
| Integer32 as atmTrunkingSigVccRetryTimer | |||
| Integer32 as atmTrunkingSigVccRetryLimit | |||
| INTEGER as atmTrunkingSigVccRestart | |||
| INTEGER as atmTrunkingSigVccPriority | |||
| Integer32 as atmTrunkingSigVccRetryCounter | |||
| AtmTrunkingBrVccConfigEntry | |||
| SEQUENCE | |||
| Integer32 as atmTrunkingBrVccRmtIWFId | |||
| INTEGER as atmTrunkingBrVccSigVccId | |||
| INTEGER as atmTrunkingBrVccId | |||
| IntfIndex as atmTrunkingBrVccIf | |||
| INTEGER as atmTrunkingBrVccVpi | |||
| INTEGER as atmTrunkingBrVccVci | |||
| INTEGER as atmTrunkingBrVccViB | |||
| INTEGER as atmTrunkingBrVccVUNIB | |||
| INTEGER as atmTrunkingBrVccServiceType | |||
| INTEGER as atmTrunkingBrVccSarType | |||
| INTEGER as atmTrunkingBrVccOwner | |||
| INTEGER as atmTrunkingBrVccOperStatus | |||
| Integer32 as atmTrunkingBrVccFwAtmPcr01 | |||
| Integer32 as atmTrunkingBrVccBwAtmPcr01 | |||
| Integer32 as atmTrunkingBrVccFwAtmScr01 | |||
| Integer32 as atmTrunkingBrVccBwAtmScr01 | |||
| Integer32 as atmTrunkingBrVccFwAtmMbs01 | |||
| Integer32 as atmTrunkingBrVccBwAtmMbs01 | |||
| INTEGER as atmTrunkingBrVccConnType | |||
| Integer32 as atmTrunkingBrVccActiveChanCnt | |||
| Integer32 as atmTrunkingBrVccMaxAal2ChanId | |||
| INTEGER as atmTrunkingBrVccCircuitModeDataSupp | |||
| INTEGER as atmTrunkingBrVccFrameModeSupp | |||
| INTEGER as atmTrunkingBrVccFaxModSupp | |||
| INTEGER as atmTrunkingBrVccCASPktXportSupp | |||
| INTEGER as atmTrunkingBrVccDTMFPktXportSupp | |||
| INTEGER as atmTrunkingBrVccMFR1PktXportSupp | |||
| INTEGER as atmTrunkingBrVccMFR2PktXportSupp | |||
| INTEGER as atmTrunkingBrVccPCMEncoding | |||
| INTEGER as atmTrunkingBrVccMaxFrameLength | |||
| INTEGER as atmTrunkingBrVccIdleChannSuprSupp | |||
| INTEGER as atmTrunkingBrVccSilenceDetSupp | |||
| INTEGER as atmTrunkingBrVccCompressionSpec | |||
| INTEGER as atmTrunkingBrVccAudioProfileSource | |||
| INTEGER as atmTrunkingBrVccAudioProfileId | |||
| INTEGER as atmTrunkingBrVccAvailBw | |||
| RowStatus as atmTrunkingBrVccRowStatus | |||
| INTEGER as atmTrunkingBrVccGr303Supp | |||
| INTEGER as atmTrunkingBrVccOamStatus | |||
| Integer32 as atmTrunkingBrVccInactiveTimer | |||
| Integer32 as atmTrunkingBrVccRetryTimer | |||
| Integer32 as atmTrunkingBrVccRetryLimit | |||
| INTEGER as atmTrunkingBrVccRestart | |||
| INTEGER as atmTrunkingBrVccCuTimer | |||
| INTEGER as atmTrunkingBrVccPriority | |||
| Integer32 as atmTrunkingBrVccRetryCounter | |||
| AtmTrunkingDataChannelConfigEntry | |||
| SEQUENCE | |||
| Integer32 as atmTrunkingDataChannelRmtIWFId | |||
| INTEGER as atmTrunkingDataChannelSigVccId | |||
| INTEGER as atmTrunkingDataChannelBrVccId | |||
| INTEGER as atmTrunkingDataChannelId | |||
| INTEGER as atmTrunkingDataChanOperStatus | |||
| INTEGER as atmTrunkingDataChanOwner | |||
| IntfIndex as atmTrunkingDataChanNBIntf | |||
| H248TermIdEntry | |||
| SEQUENCE | |||
| INTEGER as h248TermSlotId | |||
| INTEGER as h248TermPhyPortId | |||
| INTEGER as h248TermLogPortId | |||
| INTEGER as h248TermChanId | |||
| INTEGER as h248TermVpi | |||
| INTEGER as h248TermVci | |||
| OCTET STRING as h248TermId | |||
| INTEGER as h248TermAal2Cid | |||
| INTEGER as h248TermActivation | |||
| RowStatus as h248TermRowStatus | |||
| ProtectionGroupEntry | |||
| SEQUENCE | |||
| Integer32 as pgtGroupId | |||
| INTEGER as pgtSwitchoverMethod | |||
| INTEGER as pgtSwitchbackMethod | |||
| INTEGER as pgtStandbySelection | |||
| RowStatus as pgtRowStatus | |||
| InterfaceProtectionEntry | |||
| SEQUENCE | |||
| Integer32 as iptGroupId | |||
| Integer32 as iptLogicalIntfId | |||
| Integer32 as iptPhysicalIntfId | |||
| INTEGER as iptOperState | |||
| INTEGER as iptIntfType | |||
| Integer32 as iptOperatingIntf | |||
| INTEGER as iptProtCommand | |||
| Integer32 as iptSelectedStandby | |||
| RowStatus as iptRowStatus | |||