ADIC-INTELLIGENT-STORAGE-MIB

File: ADIC-INTELLIGENT-STORAGE-MIB.mib (55503 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
RFC-1215

Imported symbols

enterprises Counter IpAddress
OBJECT-TYPE DisplayString TRAP-TYPE

Defined Objects

adic 1.3.6.1.4.1.3764
OBJECT IDENTIFIER    

storage 1.3.6.1.4.1.3764.1
OBJECT IDENTIFIER    

intelligent 1.3.6.1.4.1.3764.1.1
OBJECT IDENTIFIER    

productAgentInfo 1.3.6.1.4.1.3764.1.1.10
OBJECT IDENTIFIER    

productMibVersion 1.3.6.1.4.1.3764.1.1.10.1
MIB version identifier.
OBJECT-TYPE    
  AdicMibVersion  

productSnmpAgentVersion 1.3.6.1.4.1.3764.1.1.10.2
SNMP agent version identifier.
OBJECT-TYPE    
  DisplayString  

productName 1.3.6.1.4.1.3764.1.1.10.3
Name of ADIC branded product. Uniquely identifies the product, independent of OEM.
OBJECT-TYPE    
  DisplayString  

productDisplayName 1.3.6.1.4.1.3764.1.1.10.4
Name of this agent for display purposes. May be customized for OEM.
OBJECT-TYPE    
  DisplayString  

productDescription 1.3.6.1.4.1.3764.1.1.10.5
A short description of this SNMP agent.
OBJECT-TYPE    
  DisplayString  

productVendor 1.3.6.1.4.1.3764.1.1.10.6
Name of the product vendor or OEM.
OBJECT-TYPE    
  DisplayString  

productVersion 1.3.6.1.4.1.3764.1.1.10.7
String Format: MNNO.TVBBBPP Examples 1. 091a.TR054 Version 0.91, build 54 of the RCS test code for ADIC 2. 100A.GM052 Version 1.00, build 52 of the MCB GA candidate code for ADIC M Major version number NN Minor version number O OEM (Uppercase when release candidate, otherwise lowercase) A/a - ADIC Others - Reserved) T Target G - GA Candidate Release (labeled build that is a release candidate) T - Test build (labeled build used for formal testing) D - Dev build (labeled build used for unit testing) (lower case) - specifies developer of a local build V Variant S - System R - RCS M - MCB BBB Build number (3 digit sequential number specifying exact build) PP Patch Number (Optional alphanumeric characters denoting patch level of this build if necessary)
OBJECT-TYPE    
  DisplayString  

productDisplayVersion 1.3.6.1.4.1.3764.1.1.10.8
The version identifier according to the vendor or OEM.
OBJECT-TYPE    
  DisplayString  

productLibraryClass 1.3.6.1.4.1.3764.1.1.10.9
Basic library includes minimal connectivity hardware. Intelligent library includes SAN appliances and value-added features.
OBJECT-TYPE    
  INTEGER basic(1), intelligent(2), virtual(10)  

productSerialNumber 1.3.6.1.4.1.3764.1.1.10.10
The serial number of the entire library.
OBJECT-TYPE    
  DisplayString  

globalData 1.3.6.1.4.1.3764.1.1.20
OBJECT IDENTIFIER    

agentGlobalStatus 1.3.6.1.4.1.3764.1.1.20.1
Current overall status of the agent.
OBJECT-TYPE    
  AdicAgentStatus  

agentLastGlobalStatus 1.3.6.1.4.1.3764.1.1.20.2
The status before the current status which induced an initiative to issue a global status change trap.
OBJECT-TYPE    
  AdicAgentStatus  

agentTimeStamp 1.3.6.1.4.1.3764.1.1.20.3
The last time that the agent values have been updated. Universal time in seconds since UTC 1/1/70.
OBJECT-TYPE    
  INTEGER  

agentGetTimeOut 1.3.6.1.4.1.3764.1.1.20.4
Suggested time out in milliseconds for how long an SNMP management application should wait while attempting to poll the SNMP agent.
OBJECT-TYPE    
  INTEGER  

agentModifiers 1.3.6.1.4.1.3764.1.1.20.5
Agent functional modifiers, when set the modifier is active. ----------------------------------------------------- Bit 3 => Agent in debug mode. ----------------------------------------------------- All other bits are product specific.
OBJECT-TYPE    
  INTEGER  

agentRefreshRate 1.3.6.1.4.1.3764.1.1.20.6
Rate in seconds at which the agent cached data is being updated.
OBJECT-TYPE    
  INTEGER  

components 1.3.6.1.4.1.3764.1.1.30
OBJECT IDENTIFIER    

componentTable 1.3.6.1.4.1.3764.1.1.30.10
General information about the system's components, including the unique identifiers. The structure this table is based on the Fibre Alliance MIB connUnitEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    ComponentEntry

componentEntry 1.3.6.1.4.1.3764.1.1.30.10.1
A component entry containing objects for a particular component.
OBJECT-TYPE    
  ComponentEntry  

componentId 1.3.6.1.4.1.3764.1.1.30.10.1.1
The unique identification for this component among those within this proxy domain.
OBJECT-TYPE    
  AdicGlobalId  

componentType 1.3.6.1.4.1.3764.1.1.30.10.1.2
The type of this component.
OBJECT-TYPE    
  AdicComponentType  

componentDisplayName 1.3.6.1.4.1.3764.1.1.30.10.1.3
Name of this component for display purposes. Different OEMs may have different display names for the same ADIC product.
OBJECT-TYPE    
  DisplayString SIZE(0..79)  

componentInfo 1.3.6.1.4.1.3764.1.1.30.10.1.4
A display string containing information about this component.
OBJECT-TYPE    
  DisplayString  

componentLocation 1.3.6.1.4.1.3764.1.1.30.10.1.5
Location information for this component.
OBJECT-TYPE    
  DisplayString SIZE(0..79)  

componentVendor 1.3.6.1.4.1.3764.1.1.30.10.1.6
Name vendor of this component.
OBJECT-TYPE    
  DisplayString SIZE(0..79)  

componentSn 1.3.6.1.4.1.3764.1.1.30.10.1.7
The serial number for this component.
OBJECT-TYPE    
  DisplayString SIZE(0..79)  

componentStatus 1.3.6.1.4.1.3764.1.1.30.10.1.8
Overall status of the component.
OBJECT-TYPE    
  INTEGER unknown(1), unused(2), ok(3), warning(4), failed(5)  

componentControl 1.3.6.1.4.1.3764.1.1.30.10.1.9
This object is used to control the addressed connUnit. NOTE: 'Cold Start' and 'Warm Start' are as defined in MIB II and are not meant to be a factory reset. resetColdStart: the addressed unit performs a 'Cold Start' reset. resetWarmStart: the addressed unit performs a 'Warm Start' reset. offline: the addressed unit puts itself into an implementation dependant 'offline' state. online: the addressed unit puts itself into an implementation dependant 'online' state.
OBJECT-TYPE    
  INTEGER resetColdStart(1), resetWarmStart(2), offline(3), online(4)  

componentREDId 1.3.6.1.4.1.3764.1.1.30.10.1.10
Runtime Error Detection identifier for this power supply.
OBJECT-TYPE    
  AdicREDIdentifier  

componentFirmwareVersion 1.3.6.1.4.1.3764.1.1.30.10.1.11
Firmware version (or level) for this component.
OBJECT-TYPE    
  DisplayString  

componentGeoAddrAisle 1.3.6.1.4.1.3764.1.1.30.10.1.12
The aisle number where this component is located. A negative value indicates that an aisle number is not applicable to this component.
OBJECT-TYPE    
  INTEGER  

componentGeoAddrFrame 1.3.6.1.4.1.3764.1.1.30.10.1.13
The frame number where this component is located. A negative value indicates that a frame number is not applicable to this component.
OBJECT-TYPE    
  INTEGER  

componentGeoAddrRack 1.3.6.1.4.1.3764.1.1.30.10.1.14
The rack number where this component is located. A negative value indicates that a rack number is not applicable to this component.
OBJECT-TYPE    
  INTEGER  

componentGeoAddrChassis 1.3.6.1.4.1.3764.1.1.30.10.1.15
The chassis number where this component is located. A negative value indicates that a chassis number is not applicable to this component.
OBJECT-TYPE    
  INTEGER  

componentGeoAddrBlade 1.3.6.1.4.1.3764.1.1.30.10.1.16
The blade number within the network chasis where this component is located. A negative value indicates that a blade number is not applicable to this component.
OBJECT-TYPE    
  INTEGER  

componentIpAddress 1.3.6.1.4.1.3764.1.1.30.10.1.17
IP address of this component. If the component has no IP address, this object returns 0.0.0.0. The address may refer to an internal network not accessible to an external management application.
OBJECT-TYPE    
  IpAddress  

software 1.3.6.1.4.1.3764.1.1.100
OBJECT IDENTIFIER    

hardware 1.3.6.1.4.1.3764.1.1.200
OBJECT IDENTIFIER    

powerAndCooling 1.3.6.1.4.1.3764.1.1.200.200
OBJECT IDENTIFIER    

powerSupplyTable 1.3.6.1.4.1.3764.1.1.200.200.10
** This table is optional ** Table of the power supplies.
OBJECT-TYPE    
  SEQUENCE OF  
    PowerSupplyEntry

powerSupplyEntry 1.3.6.1.4.1.3764.1.1.200.200.10.1
** This entry object is optional ** Each entry contains the information for a specific power supply.
OBJECT-TYPE    
  PowerSupplyEntry  

powerSupplyIndex 1.3.6.1.4.1.3764.1.1.200.200.10.1.1
** This object is optional ** Index of this power supply within the component specified by componentId.
OBJECT-TYPE    
  INTEGER  

powerSupplyName 1.3.6.1.4.1.3764.1.1.200.200.10.1.2
** This object is optional ** Display name of this power supply.
OBJECT-TYPE    
  DisplayString  

powerSupplyWattage 1.3.6.1.4.1.3764.1.1.200.200.10.1.3
** This object is optional ** What is maximum power output of this power supply. Units are Watts.
OBJECT-TYPE    
  INTEGER  

powerSupplyType 1.3.6.1.4.1.3764.1.1.200.200.10.1.4
** This object is optional ** DC or AC power supply?
OBJECT-TYPE    
  AdicVoltageType  

powerSupplyREDId 1.3.6.1.4.1.3764.1.1.200.200.10.1.5
** This object is optional ** Runtime Error Detection identifier for this power supply.
OBJECT-TYPE    
  AdicREDIdentifier  

powerSupplyRatedVoltage 1.3.6.1.4.1.3764.1.1.200.200.10.1.6
** This object is optional ** Rated output voltage in millivolts of this power supply.
OBJECT-TYPE    
  INTEGER  

powerSupplyLocation 1.3.6.1.4.1.3764.1.1.200.200.10.1.7
** This object is optional ** Physical location of this power supply.
OBJECT-TYPE    
  DisplayString  

voltageSensorTable 1.3.6.1.4.1.3764.1.1.200.200.20
** This table is optional ** Table of the voltage sensors.
OBJECT-TYPE    
  SEQUENCE OF  
    VoltageSensorEntry

voltageSensorEntry 1.3.6.1.4.1.3764.1.1.200.200.20.1
** This entry object is optional ** Each entry contains the information for a specific voltage sensor.
OBJECT-TYPE    
  VoltageSensorEntry  

voltageSensorIndex 1.3.6.1.4.1.3764.1.1.200.200.20.1.1
** This object is optional ** Index of this voltage sensor within the component specified by componentId.
OBJECT-TYPE    
  INTEGER  

voltageSensorName 1.3.6.1.4.1.3764.1.1.200.200.20.1.2
** This object is optional ** Display name of this voltage sensor.
OBJECT-TYPE    
  DisplayString  

voltageSensorStatus 1.3.6.1.4.1.3764.1.1.200.200.20.1.3
** This object is optional ** What is the state of this voltage sensor? Is the voltage in the nominal, warning or alarm region?
OBJECT-TYPE    
  AdicSensorStatus  

voltageSensorMillivolts 1.3.6.1.4.1.3764.1.1.200.200.20.1.4
** This object is optional ** What is the voltage in millivolts of this voltage sensor?
OBJECT-TYPE    
  INTEGER  

voltageSensorType 1.3.6.1.4.1.3764.1.1.200.200.20.1.5
** This object is optional ** DC or AC voltage sensor?
OBJECT-TYPE    
  AdicVoltageType  

voltageSensorNominalLo 1.3.6.1.4.1.3764.1.1.200.200.20.1.6
** This object is optional ** Lower voltage limit of the nominal state for this voltage sensor. Unit are millivolts.
OBJECT-TYPE    
  INTEGER  

voltageSensorNominalHi 1.3.6.1.4.1.3764.1.1.200.200.20.1.7
** This object is optional ** Upper voltage limit of the nominal state for this voltage sensor. Unit are millivolts.
OBJECT-TYPE    
  INTEGER  

voltageSensorWarningLo 1.3.6.1.4.1.3764.1.1.200.200.20.1.8
** This object is optional ** Lower voltage limit of the warning state for this voltage sensor. Unit are millivolts. If the voltage falls below this limit, the sensor enters the alarm state.
OBJECT-TYPE    
  INTEGER  

voltageSensorWarningHi 1.3.6.1.4.1.3764.1.1.200.200.20.1.9
** This object is optional ** Upper voltage limit of the warning state for this voltage sensor. Unit are millivolts. If the voltage rises above this limit, the sensor enters the alarm state.
OBJECT-TYPE    
  INTEGER  

voltageSensorLocation 1.3.6.1.4.1.3764.1.1.200.200.20.1.10
** This object is optional ** Physical location of the voltage sensor.
OBJECT-TYPE    
  DisplayString  

voltageSensorREDId 1.3.6.1.4.1.3764.1.1.200.200.20.1.11
** This object is optional ** Runtime Error Detection identifier for this voltage sensor.
OBJECT-TYPE    
  AdicREDIdentifier  

temperatureSensorTable 1.3.6.1.4.1.3764.1.1.200.200.30
** This table is optional ** Table of the temperature sensors in each component.
OBJECT-TYPE    
  SEQUENCE OF  
    TemperatureSensorEntry

temperatureSensorEntry 1.3.6.1.4.1.3764.1.1.200.200.30.1
** This entry object is optional ** Each entry contains the information for a specific sensor.
OBJECT-TYPE    
  TemperatureSensorEntry  

temperatureSensorIndex 1.3.6.1.4.1.3764.1.1.200.200.30.1.1
** This object is optional ** Index of this temperatureSensor within the component specified by componentId.
OBJECT-TYPE    
  INTEGER  

temperatureSensorName 1.3.6.1.4.1.3764.1.1.200.200.30.1.2
** This object is optional ** Display name of this temperatureSensor.
OBJECT-TYPE    
  DisplayString  

temperatureSensorStatus 1.3.6.1.4.1.3764.1.1.200.200.30.1.3
** This object is optional ** What is the state of this temperatureSensor? Is the temperature in the nominal, warning or alarm region?
OBJECT-TYPE    
  AdicSensorStatus  

temperatureSensorDegreesCelsius 1.3.6.1.4.1.3764.1.1.200.200.30.1.4
** This object is optional ** The temperature in degrees Celsuis for this temperature sensor.
OBJECT-TYPE    
  INTEGER  

temperatureSensorNominalLo 1.3.6.1.4.1.3764.1.1.200.200.30.1.5
** This object is optional ** Lower temperature limit of the nominal state for this temperature sensor. Unit are degrees Celsius.
OBJECT-TYPE    
  INTEGER  

temperatureSensorNominalHi 1.3.6.1.4.1.3764.1.1.200.200.30.1.6
** This object is optional ** Upper temperature limit of the nominal state for this temperature sensor. Unit are degrees Celsius.
OBJECT-TYPE    
  INTEGER  

temperatureSensorWarningLo 1.3.6.1.4.1.3764.1.1.200.200.30.1.7
** This object is optional ** Lower temperature limit of the warning state for this temperature sensor. Unit are degrees Celsius. If the temperature falls below this limit, the sensor enters the alarm state.
OBJECT-TYPE    
  INTEGER  

temperatureSensorWarningHi 1.3.6.1.4.1.3764.1.1.200.200.30.1.8
** This object is optional ** Upper temperature limit of the warning state for this temperature sensor. Unit are degrees Celsius. If the temperature rises above this limit, the sensor enters the alarm state.
OBJECT-TYPE    
  INTEGER  

temperatureSensorLocation 1.3.6.1.4.1.3764.1.1.200.200.30.1.9
** This object is optional ** Physical location of this temperature sensor.
OBJECT-TYPE    
  DisplayString  

temperatureSensorREDId 1.3.6.1.4.1.3764.1.1.200.200.30.1.10
** This object is optional ** Runtime Error Detection identifier for this temperature sensor.
OBJECT-TYPE    
  AdicREDIdentifier  

coolingFanTable 1.3.6.1.4.1.3764.1.1.200.200.40
** This table is optional ** Table of cooling fans in the library.
OBJECT-TYPE    
  SEQUENCE OF  
    CoolingFanEntry

coolingFanEntry 1.3.6.1.4.1.3764.1.1.200.200.40.1
** This entry object is optional ** Each entry contains the information for a specific cooling fan.
OBJECT-TYPE    
  CoolingFanEntry  

coolingFanIndex 1.3.6.1.4.1.3764.1.1.200.200.40.1.1
** This object is optional ** Index of this cooling fan within the component specified by componentId.
OBJECT-TYPE    
  INTEGER  

coolingFanName 1.3.6.1.4.1.3764.1.1.200.200.40.1.2
** This object is optional ** Display name of this coolingFan.
OBJECT-TYPE    
  DisplayString  

coolingFanStatus 1.3.6.1.4.1.3764.1.1.200.200.40.1.3
** This object is optional ** Is the fan speed in the nominal, warning or alarm region?
OBJECT-TYPE    
  AdicSensorStatus  

coolingFanRPM 1.3.6.1.4.1.3764.1.1.200.200.40.1.4
** This object is optional ** The fan speed in revolutions per minute.
OBJECT-TYPE    
  INTEGER  

coolingFanNominalLo 1.3.6.1.4.1.3764.1.1.200.200.40.1.5
** This object is optional ** Lower fan speed limit of the nominal state for this fan. Units are RPM.
OBJECT-TYPE    
  INTEGER  

coolingFanNominalHi 1.3.6.1.4.1.3764.1.1.200.200.40.1.6
** This object is optional ** Upper fan speed limit of the nominal state for this fan. Units are RPM.
OBJECT-TYPE    
  INTEGER  

coolingFanWarningLo 1.3.6.1.4.1.3764.1.1.200.200.40.1.7
** This object is optional ** Lower fan speed limit of the warning state for this fan. Units are RPM. If the speed falls below this limit, the fan enters the alarmLow state.
OBJECT-TYPE    
  INTEGER  

coolingFanWarningHi 1.3.6.1.4.1.3764.1.1.200.200.40.1.8
** This object is optional ** Upper fan speed limit of the warning state for this fan. Units are RPM. If the speed rises above this limit, the fan enters the alarmHigh state.
OBJECT-TYPE    
  INTEGER  

coolingFanLocation 1.3.6.1.4.1.3764.1.1.200.200.40.1.9
** This object is optional ** Physical location of this fan.
OBJECT-TYPE    
  DisplayString  

coolingFanREDId 1.3.6.1.4.1.3764.1.1.200.200.40.1.10
** This object is optional ** Runtime Error Detection identifier for this fan.
OBJECT-TYPE    
  AdicREDIdentifier  

sml 1.3.6.1.4.1.3764.1.1.300
OBJECT IDENTIFIER    

network 1.3.6.1.4.1.3764.1.1.400
OBJECT IDENTIFIER    

notification 1.3.6.1.4.1.3764.1.1.500
OBJECT IDENTIFIER    

startupSequenceComplete 1.3.6.1.4.1.3764.1.1.500
The component indicated by the value of componentId has successfully completed its startup sequence.
TRAP-TYPE    
  componentId  
  trapSummaryText  

trapPayloadTable 1.3.6.1.4.1.3764.1.1.500.10
Defines objects common to all trap payloads.
OBJECT-TYPE    
  SEQUENCE OF  
    TrapPayloadEntry

trapPayloadEntry 1.3.6.1.4.1.3764.1.1.500.10.1
Each entry contains the information for a specific cooling fan.
OBJECT-TYPE    
  TrapPayloadEntry  

trapSequenceNumber 1.3.6.1.4.1.3764.1.1.500.10.1.1
OBJECT-TYPE    
  INTEGER  

trapSeverity 1.3.6.1.4.1.3764.1.1.500.10.1.2
OBJECT-TYPE    
  INTEGER  

trapSummaryText 1.3.6.1.4.1.3764.1.1.500.10.1.3
OBJECT-TYPE    
  DisplayString  

trapIntendedUsage 1.3.6.1.4.1.3764.1.1.500.10.1.4
The value of this qualifier aids the management application in determining how to respond to the trap. If the value is public(1), the information is intended to be propagated to external observers, such as sending email. If the value is triggerRefresh(2), the information is intended to update the management application's data model, but not necessarily propagated to external observers.
OBJECT-TYPE    
  INTEGER public(1), triggerRefresh(2)  

shutdownSequenceInitiated 1.3.6.1.4.1.3764.1.1.501
The component indicated by the value of componentId has initiated its shutdown sequence.
TRAP-TYPE    
  componentId  
  trapSummaryText  

componentAdded 1.3.6.1.4.1.3764.1.1.502
The component indicated by the value of componentId has been added to the library.
TRAP-TYPE    
  componentId  
  componentType  

componentRemoved 1.3.6.1.4.1.3764.1.1.503
The component indicated by the value of componentId has been removed from the library.
TRAP-TYPE    
  componentId  
  componentType  

productLibraryClassChange 1.3.6.1.4.1.3764.1.1.504
The product library class has changed. This occurs when connectivity hardware is added or removed. The payload contains the productLibraryClass before and after the change.
TRAP-TYPE    
  productLibraryClass  
  productLibraryClass  

Defined Objects

Boolean  
INTEGER true(1), false(2)    

AdicMibVersion  
DisplayString    

AdicREDIdentifier  
Counter    

AdicEnable  
INTEGER enabled(1), disabled(2)    

AdicAgentStatus  
INTEGER other(1), unknown(2), ok(3), non-critical(4), critical(5), non-recoverable(6)    

AdicOnlineStatus  
INTEGER online(1), offline(2), shutdown(3)    

AdicGlobalId  
OCTET STRING SIZE(8)    

AdicComponentType  
INTEGER mcb(1), cmb(2), ioBlade(3), rcu(4), networkChasis(5), controlModule(6), expansionModule(7), powerSupply(8)    

AdicInterfaceType  
INTEGER scsi(1), fibreChannel(2)    

AdicSensorStatus  
INTEGER nominal(1), warningLow(2), warningHigh(3), alarmLow(4), alarmHigh(5), notInstalled(6), noData(7)    

AdicVoltageType  
INTEGER dc(1), ac(2)    

AdicDateAndTime  
OCTET STRING SIZE(8 | 11)    

AdicTrapSeverity  
INTEGER emergency(1), alarm(2), warning(3), notice(4), informational(5)    

AdicDoorStatus  
INTEGER open(1), closed(2), closedAndLocked(3), closedAndUnlocked(4), contollerFailed(5), notInstalled(6), noData(7)    

AdicDriveStatus  
INTEGER idle(1), loading(2), ejecting(3), inserted(4), removed(5), notInstalled(6), noData(7)    

RowStatus  
INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)    

ComponentEntry  
SEQUENCE    
  AdicGlobalId as componentId  
  AdicComponentType as componentType  
  DisplayString as componentDisplayName  
  DisplayString as componentInfo  
  DisplayString as componentLocation  
  DisplayString as componentVendor  
  DisplayString as componentSn  
  INTEGER as componentStatus  
  INTEGER as componentControl  
  AdicREDIdentifier as componentREDId  
  DisplayString as componentFirmwareVersion  
  INTEGER as componentGeoAddrAisle  
  INTEGER as componentGeoAddrFrame  
  INTEGER as componentGeoAddrRack  
  INTEGER as componentGeoAddrChassis  
  INTEGER as componentGeoAddrBlade  
  IpAddress as componentIpAddress  

PowerSupplyEntry  
SEQUENCE    
  INTEGER as powerSupplyIndex  
  DisplayString as powerSupplyName  
  INTEGER as powerSupplyWattage  
  AdicVoltageType as powerSupplyType  
  AdicREDIdentifier as powerSupplyREDId  
  INTEGER as powerSupplyRatedVoltage  
  DisplayString as powerSupplyLocation  

VoltageSensorEntry  
SEQUENCE    
  INTEGER as voltageSensorIndex  
  DisplayString as voltageSensorName  
  AdicSensorStatus as voltageSensorStatus  
  INTEGER as voltageSensorMillivolts  
  AdicVoltageType as voltageSensorType  
  INTEGER as voltageSensorNominalLo  
  INTEGER as voltageSensorNominalHi  
  INTEGER as voltageSensorWarningLo  
  INTEGER as voltageSensorWarningHi  
  DisplayString as voltageSensorLocation  
  AdicREDIdentifier as voltageSensorREDId  

TemperatureSensorEntry  
SEQUENCE    
  INTEGER as temperatureSensorIndex  
  DisplayString as temperatureSensorName  
  AdicSensorStatus as temperatureSensorStatus  
  INTEGER as temperatureSensorDegreesCelsius  
  INTEGER as temperatureSensorNominalLo  
  INTEGER as temperatureSensorNominalHi  
  INTEGER as temperatureSensorWarningLo  
  INTEGER as temperatureSensorWarningHi  
  DisplayString as temperatureSensorLocation  
  AdicREDIdentifier as temperatureSensorREDId  

CoolingFanEntry  
SEQUENCE    
  INTEGER as coolingFanIndex  
  DisplayString as coolingFanName  
  AdicSensorStatus as coolingFanStatus  
  INTEGER as coolingFanRPM  
  INTEGER as coolingFanNominalLo  
  INTEGER as coolingFanNominalHi  
  INTEGER as coolingFanWarningLo  
  INTEGER as coolingFanWarningHi  
  DisplayString as coolingFanLocation  
  AdicREDIdentifier as coolingFanREDId  

TrapPayloadEntry  
SEQUENCE    
  INTEGER as trapSequenceNumber  
  INTEGER as trapSeverity  
  DisplayString as trapSummaryText  
  INTEGER as trapIntendedUsage