
| SNMPv2-SMI | USR-DEFINITIONS-MIB |
| OBJECT-TYPE | MODULE-IDENTITY | Counter32 |
| Integer32 | common | UsrDisplayString |
| UsrConfigStatus |
| usrAdsl | 1.3.6.1.4.1.429.4.26 | ||
| The commWorks enterprise defined MIB objects for ADSL | |||
| MODULE-IDENTITY | |||
| usrAdslXmitPower | 1.3.6.1.4.1.429.4.26.1 | ||
| Transmit power of ADSL transceiver represented in dB. | |||
| OBJECT-TYPE | |||
| Integer32 | -15..-3 | ||
| usrAdslRmtReqDwnConstStatus | 1.3.6.1.4.1.429.4.26.2 | ||
| Value corresponds to the downstream constellation requested. | |||
| OBJECT-TYPE | |||
| Integer32 | 0..128 | ||
| usrAdslActualDwnConstStatus | 1.3.6.1.4.1.429.4.26.3 | ||
| Value corresponds to the actual downstream constellation that was used, which may differ from the value requested. | |||
| OBJECT-TYPE | |||
| Integer32 | 0..128 | ||
| usrAdslRmtReqUpConstStatus | 1.3.6.1.4.1.429.4.26.4 | ||
| Value corresponds to the upstream constellation requested. | |||
| OBJECT-TYPE | |||
| Integer32 | 0..128 | ||
| usrAdslActualUpConstStatus | 1.3.6.1.4.1.429.4.26.5 | ||
| Value corresponds to the actual upstream constellation that was used, which may differ from the value requested. | |||
| OBJECT-TYPE | |||
| Integer32 | 0..128 | ||
| usrAdslFwRel | 1.3.6.1.4.1.429.4.26.6 | ||
| Firmware release number of the GTI supplied transceiver software module. | |||
| OBJECT-TYPE | |||
| Integer32 | 0..16777215 | ||
| usrAdslStartletVerson | 1.3.6.1.4.1.429.4.26.7 | ||
| Value is a number that corresponds to the version number of the STARLET VLSI in the transceiver. | |||
| OBJECT-TYPE | |||
| Integer32 | 0..4 | ||
| usrAdslMeanSqError | 1.3.6.1.4.1.429.4.26.8 | ||
| Received signal to noise ratio. | |||
| OBJECT-TYPE | |||
| INTEGER | minus50db(1), plus50db(2) | ||
| usrAdslEqualization | 1.3.6.1.4.1.429.4.26.9 | ||
| TBD | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| usrAdslReceiverGain | 1.3.6.1.4.1.429.4.26.10 | ||
| Total receiver gain measured in dB. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| usrAdslBytesErrCorrected | 1.3.6.1.4.1.429.4.26.11 | ||
| Number of bytes corrected by Reed-Solomon error correction algorithm in the STARLET. | |||
| OBJECT-TYPE | |||
| Integer32 | 0..255 | ||
| usrAdslBytesNotErrCorrected | 1.3.6.1.4.1.429.4.26.12 | ||
| Number of bytes not corrected by Reed-Solomon error correction algorithm in the STARLET. | |||
| OBJECT-TYPE | |||
| Integer32 | 0..255 | ||
| usrAdslOverflowCounter | 1.3.6.1.4.1.429.4.26.13 | ||
| Running counter for when usrAdslBytesErrorCorrected or usrAdslBytesNotErrorCorrected overflows | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| usrAdslOpState | 1.3.6.1.4.1.429.4.26.14 | ||
| Defines the high level operating state of the transceiver. Used by the customer to determine whether the transceiver is in idle mode, data mode, test mode, or startup. | |||
| OBJECT-TYPE | |||
| Integer32 | 0..134 | ||
| usrAdslStartupProgress | 1.3.6.1.4.1.429.4.26.15 | ||
| Defines the current detailed startup state of the transceiver. The LSB determines the major mode corresponding to startup in var usrAdslOpState. | |||
| OBJECT-TYPE | |||
| Integer32 | 0..191 | ||
| usrAdslLastFailedStatus | 1.3.6.1.4.1.429.4.26.16 | ||
| Defines the last detailed state reached in usrAdslStartupProgress before startup failed. | |||
| OBJECT-TYPE | |||
| Integer32 | 0..191 | ||
| usrAdslActualBaudDataRateDwn | 1.3.6.1.4.1.429.4.26.17 | ||
| Actual downstream rate of kilobytes per second. | |||
| OBJECT-TYPE | |||
| Integer32 | 340..952 | ||
| usrAdslActualBaudDataRateDwnMar | 1.3.6.1.4.1.429.4.26.18 | ||
| TBD | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| usrAdslActualBaudDataRateUp | 1.3.6.1.4.1.429.4.26.19 | ||
| Actual upstream rate of kilobytes per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| usrAdslActualBaudDataRateUpMarg | 1.3.6.1.4.1.429.4.26.20 | ||
| TBD | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| usrAdslCFMStatusFlag | 1.3.6.1.4.1.429.4.26.21 | ||
| This variable controls saving and loading of configuration information for the D56k WAN Driver. The value can be set to either save or load by a management station. The other values indicate if any configuration operation and what type is in progress. | |||
| OBJECT-TYPE | |||
| UsrConfigStatus | |||
| usrAdslCfgFileName | 1.3.6.1.4.1.429.4.26.22 | ||
| The name of a ConfigFile to read/write the D56k parameters. If the value of this object is an empty string, then the D56k Driver uses the default name `@file://D56k.cfg'. | |||
| OBJECT-TYPE | |||
| UsrDisplayString | |||
| usrAdslResetStatus | 1.3.6.1.4.1.429.4.26.23 | ||
| The Reset Status of the ADSL Starlet chipset | |||
| OBJECT-TYPE | |||
| Integer32 | |||