
AISLCSYSCFG-MIB
File:
AISLCSYSCFG-MIB.mib (16022 bytes)
Imported modules
Imported symbols
Defined Objects
| aii |
1.3.6.1.4.1.539 |
| OBJECT IDENTIFIER |
|
|
|
| aiSLCSysCfgManagerEntry |
1.3.6.1.4.1.539.21.5.1 |
| Entry of aiSLCSysCfgManagerTable. |
| OBJECT-TYPE |
|
|
|
| |
AISLCSysCfgManagerEntry |
|
|
| aislcscExtProbeStatus |
1.3.6.1.4.1.539.21.11 |
| This is the state of the external temperature probe. It is either available or unavailable. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
available(1), unavailable(2) |
|
| aislcscExtLowThreshCelsius |
1.3.6.1.4.1.539.21.12 |
| The lower threshold for the external temperature probe, in degrees Celsius. When the temperature drops below this value, an SNMP trap is sent. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
-54..124 |
|
| aislcscExtHighThreshCelsius |
1.3.6.1.4.1.539.21.13 |
| The upper threshold for the external temperature probe, in degrees Celsius. When the temperature rises above this value, an SNMP trap is sent. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
-54..124 |
|
| aislcscIntProbeStatus |
1.3.6.1.4.1.539.21.15 |
| This is the state of the internal temperature probe. It is either available or unavailable. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
available(1), unavailable(2) |
|
| aislcscIntLowThreshCelsius |
1.3.6.1.4.1.539.21.16 |
| The lower threshold for the internal temperature probe, in degrees Celsius. When the temperature drops below this value, an SNMP trap is sent. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
-54..124 |
|
| aislcscIntHighThreshCelsius |
1.3.6.1.4.1.539.21.17 |
| The upper threshold for the internal temperature probe, in degrees Celsius. When the temperature rises above this value, an SNMP trap is sent. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
-54..124 |
|
| aiSLCSysCfgKeepAliveEntry |
1.3.6.1.4.1.539.21.20.1 |
| Entry of aiSLCSysCfgKeepAliveTable. |
| OBJECT-TYPE |
|
|
|
| |
AISLCSysCfgKeepAliveEntry |
|
|
| aislcscKeepAliveWarningText |
1.3.6.1.4.1.539.21.20.1.4 |
| Message sent in SNMP trap when the network element stops responding to pings. Maximum length is 64 characters. |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
SIZE(0..64) |
|
| aislcscKeepAliveOKText |
1.3.6.1.4.1.539.21.20.1.5 |
| Message sent in SNMP trap when the network element begins responding to pings after a period of unresponsiveness. Maximum length is 64 characters. |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
SIZE(0..64) |
|
| aislcscKeepAliveCommStat |
1.3.6.1.4.1.539.21.20.1.6 |
| Determines the current communication status between the system and the target equipment. If the target equipment does not respond to pings, this object will be set to lost(3). This object will be set to disabled(1) if no IP address is configured. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(1), ok(2), lost(3) |
|
| aislcscSoftwareUpdateName |
1.3.6.1.4.1.539.21.23 |
| To update the system software, set this object to the name of the new image file, and monitor aislcscSoftwareUpdateStatus until it changes to ok(1) or error(3). If the update succeeds, the new software will be used after the system is rebooted. Maximum length is 255 characters; additional restrictions are system-dependent. |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
SIZE(0..255) |
|
| aislcscSoftwareUpdateStatus |
1.3.6.1.4.1.539.21.24 |
| See aislcscSoftwareUpdateName for a description of how to use this object. ready(1) -- ready to update software (read-write) inProgress(2) -- update is in progress (read-only) ok(3) -- update completed successfully (read-only) error(4) -- update failed (read-only) |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
ready(1), inProgress(2), ok(3), error(4) |
|
| aislcscResetSystem |
1.3.6.1.4.1.539.21.25 |
| When read, this object is always none(1). Setting none(1) has no effect. Setting coldStart(2) reboots the system. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(1), coldStart(2) |
|
| aislcscDiscPowerSupplyStatus |
1.3.6.1.4.1.539.21.26 |
| Status of the power supply. okay(1) or trouble(2). When the SLC is booted, this indicates okay(1) until the software determines the correct status. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
okay(1), trouble(2) |
|
| aislcscOverallAlarmSeverity |
1.3.6.1.4.1.539.21.31 |
| Current overall alarm severity (0-7). This value can be set at the user's discretion, but will be overwritten when the next alarm is generated. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..7 |
|
| aislcscTimeZone |
1.3.6.1.4.1.539.21.32.1 |
| The current Time Zone of the system in the following format: <+|->HH:MM, where HH is the number of hours and MM is the number of minutes. <+/-> specifies the East/West direction. For example, EDT would be displayed as: -05:00 |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
SIZE(4..6) |
|
| aislcscSntpPoll |
1.3.6.1.4.1.539.21.32.3 |
| Indicates whether the SNTP client is enabled on this system. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(1), enabled(2) |
|
| aislcscStandaloneStatus |
1.3.6.1.4.1.539.21.33 |
| standalone(1): The card is operating standalone (no external CLC). nonStandalone(2): The card is operating as a line card with a CLC. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
standalone(1), nonStandalone(2) |
|
Defined Objects
| AISLCSysCfgManagerEntry |
|
| SEQUENCE |
|
|
|
| |
PositiveInteger as aislcscManagerIndex |
|
|
| |
IpAddress as aislcscManagerAddress |
|
|
| |
INTEGER as aislcscManagerTrapPort |
|
|
| AISLCSysCfgKeepAliveEntry |
|
| SEQUENCE |
|
|
|
| |
PositiveInteger as aislcscKeepAliveIndex |
|
|
| |
IpAddress as aislcscKeepAliveAddress |
|
|
| |
INTEGER as aislcscKeepAliveInterval |
|
|
| |
DisplayString as aislcscKeepAliveWarningText |
|
|
| |
DisplayString as aislcscKeepAliveOKText |
|
|
| |
INTEGER as aislcscKeepAliveCommStat |
|
|