ALCATEL-IND1-AAA-MIB

File: ALCATEL-IND1-AAA-MIB.mib (100462 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
SNMP-FRAMEWORK-MIB INET-ADDRESS-MIB ALCATEL-IND1-BASE

Imported symbols

enterprises MODULE-IDENTITY OBJECT-IDENTITY
OBJECT-TYPE IpAddress Unsigned32
NOTIFICATION-TYPE DisplayString MacAddress
RowStatus MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP SnmpAdminString InetAddressType
InetAddress softentIND1AAA alaAaaTraps

Defined Objects

alcatelIND1AAAMIB 1.3.6.1.4.1.6486.800.1.2.1.15.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Authentication, Authorization, and Accounting (AAA) Subsystem. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
MODULE-IDENTITY    

alcatelIND1AAAMIBObjects 1.3.6.1.4.1.6486.800.1.2.1.15.1.1
Branch For Authentication, Authorization, and Accounting (AAA) Subsystem Managed Objects.
OBJECT-IDENTITY    

aaaServerMIB 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1
OBJECT IDENTIFIER    

aaaServerTable 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1
This table shows current configuration for each AAA server.
OBJECT-TYPE    
  SEQUENCE OF  
    AaaServerEntry

aaaServerEntry 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1
An AAA server configuration identified by its protocol and its index. An entry is created/removed when a server is defined or undefined with IOS configuration commands via CLI or by issuing appropriate sets to this table using snmp.
OBJECT-TYPE    
  AaaServerEntry  

aaasName 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1.1
Name of the server. This name is given by the operator to refer the server.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaasProtocol 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1.2
Protocol used with the server: radius(1) - RADIUS ldap(2) - LDAP ace(3) - ACE tacacs(4) - TACACS+
OBJECT-TYPE    
  INTEGER radius(1), ldap(2), ace(3), tacacs(4)  

aaasHostName 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1.3
DNS name of the server host.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

aaasIpAddress 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1.4
IP address of the server host.
OBJECT-TYPE    
  IpAddress  

aaasHostName2 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1.5
DNS name of the backup server host.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

aaasIpAddress2 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1.6
IP address of the backup server host.
OBJECT-TYPE    
  IpAddress  

aaasRetries 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1.7
Number of retries the switch makes to the server to authenticate a user before trying the next backup server. The default value is 3.
OBJECT-TYPE    
  INTEGER 0..32  

aaasTimout 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1.8
Time-out for server replies to authentication requests. The default value is 2.
OBJECT-TYPE    
  INTEGER 0..512  

aaasRadKey 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1.9
The shared secret is a string of characters known to the switch and to the RADIUS server, but it is not sent out over the network. The secret can be any text string and must be configured here as well as on the server. The secret is stored encrypted using a two way algorithm.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

aaasRadAuthPort 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1.10
For RADIUS server only. Port number for authentication request; the host is not used for authentication if set to 0. The default value is 1645.
OBJECT-TYPE    
  INTEGER 0..65535  

aaasRadAcctPort 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1.11
For RADIUS server only. Port number for accounting request; the host is not used for authentication if set to 0. The default value is 1646.
OBJECT-TYPE    
  INTEGER 0..65535  

aaasLdapPort 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1.12
For LDAP server only. Port number for LDAP server host.
OBJECT-TYPE    
  INTEGER 0..65535  

aaasLdapDn 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1.13
For LDAP server only. the super user dn, i.e., the administrative distinguished name recognized by the LDAP-enabled directory servers (e.g., cn=manager)
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

aaasLdapPasswd 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1.14
For LDAP server only. the super user password, i.e., the administrative password recognized by LDAP-enabled directory servers (e.g., secret). The secret is stored encrypted using a two way algorithm.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaasLdapSearchBase 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1.15
For LDAP server only. Search base recognized by LDAP-enabled directory servers (e.g.,o=company, c=US).
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

aaasLdapServType 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1.16
For LDAP server only. Directory server type used in LDAP Authentication: ns(0) - non significant value generic(1) - Generic Schema netscape(2) - Netscape Directory Server novell(3) - Novell NDS sun(4) - Sun Directory Services microsoft(5) - Microsoft Active Directory
OBJECT-TYPE    
  INTEGER ns(0), generic(1), netscape(2), novell(3), sun(4), microsoft(5)  

aaasLdapEnableSsl 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1.17
Only for LDAP server. Specify if the connection between the swtich and the LDAP server use a SSL session.
OBJECT-TYPE    
  INTEGER ns(0), true(1), false(2)  

aaasAceClear 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1.18
Only for ACE server. The ACE/Server generates a secrets that it sends to clients for authentication. While you cannot configure the secret on the switch, you can clear it. To clear the current ACE/Server secret, set this OID. After clearing the secret on the switch, you must also clear the secret from the ACE server.
OBJECT-TYPE    
  INTEGER ns(0), true(1), false(2)  

aaasRowStatus 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1.19
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

aaasTacacsKey 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1.20
The shared secret is a string of characters known to the switch and to the TACACS+ server, but it is not sent out over the network. The secret can be any text string and must be configured here as well as on the server. The secret is stored encrypted using a two way algorithm.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

aaasTacacsPort 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1.21
For TACACS+ server only. Port number for LDAP server host.
OBJECT-TYPE    
  INTEGER 0..65535  

aaasHttpPort 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1.22
For HTTP server only. Port number for LDAP server host.
OBJECT-TYPE    
  INTEGER 0..65535  

aaasHttpDirectory 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1.23
For HTTP server only. A combination of directory tree and filename where the CRL can be found.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

aaasHttpProxyHostName 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1.24
For HTTP server only. DNS name of the proxy server.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

aaasHttpProxyIpAddress 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1.25
For HTTP server only. IP address of the proxy server.
OBJECT-TYPE    
  IpAddress  

aaasHttpProxyPort 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1.26
For HTTP server only. Port number for HTTP proxy server.
OBJECT-TYPE    
  INTEGER 0..65535  

aaasVrfName 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.1.1.1.27
Name of the VRF that the server is on. This VRF name is valid only when the server type is RADIUS. (aaasProtocol = 1 (Radius).
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaaAuthAcctMIB 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2
OBJECT IDENTIFIER    

aaaAuthVlanTable 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.1
This table allow to display and modify the configuration of the authentication servers for the authenticated vlans.
OBJECT-TYPE    
  SEQUENCE OF  
    AaaAuthVlanEntry

aaaAuthVlanEntry 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.1.1
There can be one or several entries in this table. In case of single authority, all vlan are authenticated by the same set of servers, the aaatvVlan index is then equal to 0. In case of multiple authorities, each authenticated vlan has its own list of servers.
OBJECT-TYPE    
  AaaAuthVlanEntry  

aaatvVlan 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.1.1.1
It indicate the vlan number authenticated by the servers. The value (0) means that all vlan are authenticated by the same servers (single mode configuration).
OBJECT-TYPE    
  INTEGER 0..65535  

aaatvName1 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.1.1.2
Name of the server. It corresponds to an index value of the aaaServerTable An Ace server can not be used in front hand.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaatvName2 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.1.1.3
Name of the server. It corresponds to an index value of the aaaServerTable An Ace server can not be used in front hand.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaatvName3 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.1.1.4
Name of the server. It corresponds to an index value of the aaaServerTable An Ace server can not be used in front hand.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaatvName4 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.1.1.5
Name of the server. It corresponds to an index value of the aaaServerTable An Ace server can not be used in front hand.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaatvRowStatus 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.1.1.6
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

aaatvCertificate 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.1.1.7
use of x509 user certificate during the HTTPs session establisment. noCertificate(0)- no user certificate is required, certificateOnly(1) - the DN from the certifiicate is used to access to the authorization data of the user certificateWithPassword(2) - the user must execute a log-in procedure with user name and password after his certificate validation
OBJECT-TYPE    
  INTEGER noCertificate(0), certificateOnly(1), certificateWithPassword(2)  

aaaAuthSATable 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.2
This table allow to display and modify the configuration of the authentication servers for the switch accesses.
OBJECT-TYPE    
  SEQUENCE OF  
    AaaAuthSAEntry

aaaAuthSAEntry 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.2.1
A switch access authentication entry is specified by the type of access.
OBJECT-TYPE    
  AaaAuthSAEntry  

aaatsInterface 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.2.1.1
Type of connection that must be authenticated default(1) -define the default authentication method for console, telnet, ftp, snmp , http and ssh. If the operator interface is not especially configured the default value is applied to this interface.
OBJECT-TYPE    
  INTEGER default(1), console(2), telnet(3), ftp(4), http(5), snmp(6), ssh(7)  

aaatsName1 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.2.1.2
Name of the server. Special value 'local' correspond to the local database. Other name correspond to an index value of the aaaServerTable snmp entry can only use ldap server and local database.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaatsName2 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.2.1.3
Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local database. Other name correspond to an index value of the aaaServerTable snmp entry can only use ldap server and local database.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaatsName3 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.2.1.4
Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local database. Other name correspond to an index value of the aaaServerTable snmp entry can only use ldap server and local database.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaatsName4 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.2.1.5
Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local database. Other name correspond to an index value of the aaaServerTable snmp entry can only use ldap server and local database.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaatsRowStatus 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.2.1.7
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

aaatsCertificate 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.2.1.8
use of x509 user certificate during the HTTPs session establisment. noCertificate(0)- no user certificate is required, certificateOnly(1) - the DN from the certifiicate is used to access to the authorization data of the user certificateWithPassword(2) - the user must execute a log-in procedure with user name and password after his certificate validation
OBJECT-TYPE    
  INTEGER noCertificate(0), certificateOnly(1), certificateWithPassword(2)  

aaaAcctVlanTable 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.3
This table allows to display and configure the accounting servers for authenticated Vlans.
OBJECT-TYPE    
  SEQUENCE OF  
    AaaAcctVlanEntry

aaaAcctVlanEntry 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.3.1
There can be one or several entries in this table. In case of single authority, accounting information for all vlans are sent to the same set of servers, the aaatVlan index is then equal to 0. In case of multiple authorities, each authenticated vlan has its own list of servers.
OBJECT-TYPE    
  AaaAcctVlanEntry  

aaacvVlan 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.3.1.1
Current vlan number. The value (0) for avlan interface means that all authenticated vlans use the same servers for authentication.
OBJECT-TYPE    
  INTEGER 0..65535  

aaacvName1 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.3.1.2
Name of the server. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaaServerTable An Ace server can not be used for accounting.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaacvName2 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.3.1.3
Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaaServerTable An Ace server can not be used for accounting.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaacvName3 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.3.1.4
Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaaServerTable An Ace server can not be used for accounting.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaacvName4 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.3.1.5
Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaaServerTable An Ace server can not be used for accounting.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaacvRowStatus 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.3.1.6
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

aaaAcctSATable 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.4
This table shows current configuration for Switch access accounting.
OBJECT-TYPE    
  SEQUENCE OF  
    AaaAcctSAEntry

aaaAcctSAEntry 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.4.1
Accounting configuration for switch access.
OBJECT-TYPE    
  AaaAcctSAEntry  

aaacsInterface 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.4.1.1
For now, accounting for console, telnet, ftp, http, snmp, ssh are stored in the same set of servers, the index is always (1).
OBJECT-TYPE    
  INTEGER 1..1  

aaacsName1 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.4.1.2
Name of the server. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaaServerTable An Ace server can not be used for accounting.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaacsName2 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.4.1.3
Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaaServerTable An Ace server can not be used for accounting.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaacsName3 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.4.1.4
Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaaServerTable An Ace server can not be used for accounting.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaacsName4 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.4.1.5
Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaaServerTable An Ace server can not be used for accounting.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaacsRowStatus 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.4.1.6
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

aaaAuth8021xTable 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.5
This table shows current configuration for 802.1X authentication.
OBJECT-TYPE    
  SEQUENCE OF  
    AaaAuth8021xEntry

aaaAuth8021xEntry 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.5.1
configuration for 802.1X authentication.
OBJECT-TYPE    
  AaaAuth8021xEntry  

aaatxInterface 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.5.1.1
For now, the index is always (1).
OBJECT-TYPE    
  INTEGER 1..1  

aaatxName1 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.5.1.2
Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaatxName2 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.5.1.3
Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaatxName3 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.5.1.4
Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaatxName4 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.5.1.5
Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaatxOpen 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.5.1.6
Type of port openning after authentication. If open-global(1) the port treats packet with unknown MAC addresses like an un-authenticated port. If open-unique(2), the port drops incomming packet with unknown MAC addresses.
OBJECT-TYPE    
  INTEGER global(1), unique(2)  

aaatxRowStatus 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.5.1.7
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

aaaAcct8021xTable 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.6
This table shows current configuration for 802.1X accounting.
OBJECT-TYPE    
  SEQUENCE OF  
    AaaAcct8021xEntry

aaaAcct8021xEntry 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.6.1
Configuration for 802.1X accounting.
OBJECT-TYPE    
  AaaAcct8021xEntry  

aaacxInterface 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.6.1.1
For now, the index is always (1).
OBJECT-TYPE    
  INTEGER 1..1  

aaacxName1 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.6.1.2
Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaacxName2 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.6.1.3
Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaacxName3 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.6.1.4
Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaacxName4 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.6.1.5
Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaacxRowStatus 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.6.1.6
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

aaaPkiTable 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.7
This table shows current configuration for PKI.
OBJECT-TYPE    
  SEQUENCE OF  
    AaaPkiEntry

aaaPkiEntry 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.7.1
Configuration for PKI.
OBJECT-TYPE    
  AaaPkiEntry  

aaatpInterface 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.7.1.1
For now, the index is always (1).
OBJECT-TYPE    
  INTEGER 1..1  

aaatpName1 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.7.1.2
Name of the server contening the CRL. It corresponds to an index value of the aaaServerTable
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaatpName2 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.7.1.3
Name of the server contening the CRL. It corresponds to an index value of the aaaServerTable
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaatpName3 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.7.1.4
Name of the server contening the CRL. It corresponds to an index value of the aaaServerTable
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaatpName4 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.7.1.5
Name of the server contening the CRL. It corresponds to an index value of the aaaServerTable
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaatpLevel 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.7.1.6
level of control to do on the user certificate. certificate means that there is a valid chain of certificate between the user certificate and a root certificate known by the switch. The root certificates are managed using specific pki commands. All certificates are valid and well signed. not-revoked means that using CRL or other ways configuring using pki commands the non-revocation of the certificate is checked. repository means that after the precedent control, there is a binary comparison of the certificate on the server and the one received during the authorization (instantaneous revocation possible) This verification is only possible when the access handler is configured with certificateOnly
OBJECT-TYPE    
  INTEGER certificate(1), notRevoked(2), repository(3)  

aaatpRowStatus 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.7.1.7
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

aaaAuthMACTable 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.8
This table shows current configuration for non-suplicant ( MAC based ) authentication.
OBJECT-TYPE    
  SEQUENCE OF  
    AaaAuthMACEntry

aaaAuthMACEntry 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.8.1
configuration for MAC based authentication.
OBJECT-TYPE    
  AaaAuthMACEntry  

aaaMacInterface 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.8.1.1
For now, the index is always (1).
OBJECT-TYPE    
  INTEGER 1..1  

aaaMacSrvrName1 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.8.1.2
Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaaMacSrvrName2 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.8.1.3
Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaaMacSrvrName3 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.8.1.4
Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaaMacSrvrName4 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.8.1.5
Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaaMacSrvrRowStatus 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.8.1.6
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

aaaAcctCmdTable 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.9
This table stores the commands that will be logged during an accounting session. This feature is valid only for Tacacs+ accounting
OBJECT-TYPE    
  SEQUENCE OF  
    AaaAcctCmdEntry

aaaAcctCmdEntry 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.9.1
Tacacs+ Accounting configuration for executed commands.
OBJECT-TYPE    
  AaaAcctCmdEntry  

aaacmdInterface 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.9.1.1
For now, accounting for console, telnet, ftp, http, snmp, ssh are stored in the same set of servers, the index is always (1).
OBJECT-TYPE    
  INTEGER 1..1  

aaacmdSrvName1 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.9.1.2
Name of the Tacacs+ server. Other name correspond to an index value of the aaaServerTable
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaacmdSrvName2 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.9.1.3
Name of the Tacacs+ server used if the precedent is not accessible. Other name correspond to an index value of the aaaServerTable
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaacmdSrvName3 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.9.1.4
Name of the Tacacs+ server used if the precedent is not accessible. Other name correspond to an index value of the aaaServerTable
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaacmdSrvName4 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.9.1.5
Name of the Tacacs+ server used if the precedent is not accessible. Other name correspond to an index value of the aaaServerTable
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaacmdRowStatus 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.2.9.1.6
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

aaaUserMIB 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.3
OBJECT IDENTIFIER    

aaaUserTable 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.3.1
This table shows current configuration for the local user database.
OBJECT-TYPE    
  SEQUENCE OF  
    AaaUserEntry

aaaUserEntry 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.3.1.1
An user configuration identified by its user name.
OBJECT-TYPE    
  AaaUserEntry  

aaauUserName 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.3.1.1.1
Name of the user.
OBJECT-TYPE    
  DisplayString SIZE(0..63)  

aaauPassword 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.3.1.1.2
Password of the user. For get response the password in encoded in a one way method. This makes the password readable by noone.
OBJECT-TYPE    
  DisplayString SIZE(0..47)  

aaauReadRight1 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.3.1.1.3
Specifies the families that the user can execute with read right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit is set, the user is allowed to run commands of this family.First part of the bitmask.If the value is not specified, the value configured for the 'default' user is taken
OBJECT-TYPE    
  Unsigned32 0..4294967295  

aaauReadRight2 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.3.1.1.4
Specifies the families that the user can execute with read right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit is set, the user is allowed to run commands of this family.Second part of the bitmask.If the value is not specified, the value configured for the 'default' user is taken
OBJECT-TYPE    
  Unsigned32 0..4294967295  

aaauWriteRight1 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.3.1.1.5
Specifies the families that the user can execute with write right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit is set, the user is allowed to run commands of this family. First part of the bitmask.If the value is not specified, the value configured for the 'default' user is taken
OBJECT-TYPE    
  Unsigned32 0..4294967295  

aaauWriteRight2 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.3.1.1.6
Specifies the families that the user can execute with write right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit is set, the user is allowed to run commands of this family. Second part of the bitmask.If the value is not specified, the value configured for the 'default' user is taken
OBJECT-TYPE    
  Unsigned32 0..4294967295  

aaauProfile 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.3.1.1.7
Specifies the profile number. A profile number in the user account database represents the geographic privilege. This number points to an entry in the table of the user profiles.
OBJECT-TYPE    
  INTEGER 0..2147483647  

aaauSnmpLevel 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.3.1.1.8
Specifies if the user is authorized to use SNMP and if yes its security level. no(1) - Not authorized to use SNMP. noauth(2) - SNMPv1,SNMPv2c or SNMPv3 without authentication. sha(3) - SNMPv3 with SHA authentication and no encryption. md5(4) - SNMPv3 with MD5 authentication and no encryption. sha-des(5) - SNMPv3 with SHA authentication and encryption. md5-des(6) - SNMPv3 with MD5 authentication and encryption. If the value is not specified, the value configured for the 'default' user is taken
OBJECT-TYPE    
  INTEGER no(1), noauth(2), sha(3), md5(4), shaDes(5), md5Des(6)  

aaauSnmpAuthKey 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.3.1.1.9
Authentication key of the user. The key is encoded in a two way method. The encryption key is deducted from this key.
OBJECT-TYPE    
  OCTET STRING SIZE(0..255)  

aaauRowStatus 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.3.1.1.10
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

aaauOldPassword 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.3.1.1.11
Internal use
OBJECT-TYPE    
  DisplayString SIZE(0..47)  

aaauEndUserProfile 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.3.1.1.12
Specifies the END user profile name.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaauPasswordExpirationDate 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.3.1.1.13
The local time of when the password would be expired. This date will be reset once the value of aaaAsaDefaultPasswordExpirationInDays is updated. Only the following format is valid: mm/dd/yyyy hh:mm where mm - month (1-12) dd - day (1-31) yyyy - year (2000-2050) hh - hour (1-24) mm - minute (1-59) Password will not be expired if set to empty string
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

aaauPasswordExpirationInMinute 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.3.1.1.14
Number of minutes from now till the password expiration time. Setting this object will update aaauPasswordExpirationDate. If -1, password will not be expired. If 0, password has been expired.
OBJECT-TYPE    
  INTEGER -1..216000  

aaauPasswordAllowModifyDate 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.3.1.1.15
The local time of when the password can be start to be modified. This date will be reset once the value of aaauPasswordAllowModifyDate is updated. Only the following format is valid: mm/dd/yyyy hh:mm where mm - month (1-12) dd - day (1-31) yyyy - year (2000-2050) hh - hour (1-24) mm - minute (1-59) Password will not be expired if set to empty string
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

aaauPasswordLockoutEnable 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.3.1.1.16
Indicate whether this account is locked out.
OBJECT-TYPE    
  INTEGER lockout(1), unlock(2), expired(3)  

aaauBadAtempts 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.3.1.1.17
Number bad password attempts in the observation window.
OBJECT-TYPE    
  INTEGER 0..999  

aaaAuthenticatedUserTable 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.4
Provide the list of users currently authenticated into the switch for bridging purpose.
OBJECT-TYPE    
  SEQUENCE OF  
    AaaAuthenticatedUserEntry

aaaAuthenticatedUserEntry 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.4.1
An entry in the AaaAuthenticatedUserTable.
OBJECT-TYPE    
  AaaAuthenticatedUserEntry  

aaaaMacAddress 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.4.1.1
Mac address of the user's device.
OBJECT-TYPE    
  MacAddress  

aaaaUserName 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.4.1.2
Login name of the user.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

aaaaSlot 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.4.1.3
Slot number on which user is connected.
OBJECT-TYPE    
  INTEGER 0..2147483647  

aaaaPort 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.4.1.4
Port number on which the user is connected.
OBJECT-TYPE    
  INTEGER 0..2147483647  

aaaaVlan 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.4.1.5
Vlan number on which the user is authenticated.
OBJECT-TYPE    
  INTEGER 0..65535  

aaaaDrop 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.4.1.6
Allow to remove a Mac address from a Vlan. The corresponding user is logged out of the network.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

aaaAvlanConfig 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.5
OBJECT IDENTIFIER    

aaaAvlanDnsName 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.5.1
Dns name used to get the authentication Web page when authenticating using http.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

aaaAvlanDhcpDefGateway 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.5.2
IP address that is used as the DHCP gateway address before the user get authenticated.It specifies the subnet into which a client receives its IP address prior to authentication
OBJECT-TYPE    
  IpAddress  

aaaAvlanDefaultTraffic 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.5.3
Enable the traffic in the default vlan prior to authentication if the value is true
OBJECT-TYPE    
  INTEGER ns(0), true(1), false(2)  

aaaAvlanPortBound 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.5.4
Associate a MAC address to a specific Vlan on an authenticated port (printers, ...)
OBJECT-TYPE    
  INTEGER ns(0), true(1), false(2)  

aaaAvlanLanguage 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.5.5
Force to read the language specific file for HTTP AVLAN (label.txt)
OBJECT-TYPE    
  INTEGER ns(0), true(1), false(2)  

aaaAsaConfig 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.6
OBJECT IDENTIFIER    

aaaAsaPasswordSizeMin 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.6.1
Minimum number of digits of the passwords ( nominator aaauPassword).
OBJECT-TYPE    
  INTEGER 0..14  

aaaAsaDefaultPasswordExpirationInDays 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.6.2
Default password expiration time in days to be applied to all users. Updating this object will reset aaauPasswordExpirationDate. Password expiration will not be enforced if set to 0.
OBJECT-TYPE    
  INTEGER 0..150  

aaaAsaPasswordContainUserName 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.6.3
Indicate whether check password contains username or not.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

aaaAsaPasswordMinUpperCase 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.6.4
Minimum number of English uppercase characters required for password. 0 is disable
OBJECT-TYPE    
  INTEGER 0..7  

aaaAsaPasswordMinLowerCase 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.6.5
Minimum number of English lowercase characters required for password 0 is disable.
OBJECT-TYPE    
  INTEGER 0..7  

aaaAsaPasswordMinDigit 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.6.6
Minimum number of base-10 digits required for password. 0 is disable
OBJECT-TYPE    
  INTEGER 0..7  

aaaAsaPasswordMinNonAlphan 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.6.7
Minimum number of non-alphanumeric required for password. 0 is disable
OBJECT-TYPE    
  INTEGER 0..7  

aaaAsaPasswordHistory 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.6.8
Password history feature will prevent users from repeatedly using the same password. 0 is disable
OBJECT-TYPE    
  INTEGER 0..24  

aaaAsaPasswordMinAge 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.6.9
The password can't be modified in these days. 0 is disable
OBJECT-TYPE    
  INTEGER 0..150  

aaaAsaLockoutWindow 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.6.10
The window of time in which the system increments the bad logon count.(minutes) 0 is disable
OBJECT-TYPE    
  INTEGER 0..99999  

aaaAsaLockoutDuration 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.6.11
The amount of time that an account is locked due to the aaauLockoutThreshold being exceeded.(minutes) 0 is disable
OBJECT-TYPE    
  INTEGER 0..99999  

aaaAsaLockoutThreshold 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.6.12
The number of invalid logon attempts that are permitted before the account is locked out. 0 is disable
OBJECT-TYPE    
  INTEGER 0..999  

aaaAsaROUserPingTrtEnable 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.6.13
Global user config to allow/deny ping and traceroute cmds for read-only user. 0 - disable 1 - enable
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

aaaAsaAccessPolicyAdminConsoleOnly 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.6.14
Enable or disable AdminUser console only restriction
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

aaaAvlanAddressTable 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.7
Vlan authenticated IP address Table
OBJECT-TYPE    
  SEQUENCE OF  
    AaaAvlanAddressEntry

aaaAvlanAddressEntry 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.7.1
Vlan authenticated IP address entry
OBJECT-TYPE    
  AaaAvlanAddressEntry  

aaaAvlanId 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.7.1.1
Vlan Id corresponding to the authenticated IP address
OBJECT-TYPE    
  INTEGER 1..4094  

aaaAvlanIpAddress 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.7.1.2
Authenticated IP address for this vlan id
OBJECT-TYPE    
  IpAddress  

aaaUserNetProfileTable 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.8
User Network Profile Table
OBJECT-TYPE    
  SEQUENCE OF  
    AaaUserNetProfileEntry

aaaUserNetProfileEntry 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.8.1
User Network Profile entry
OBJECT-TYPE    
  AaaUserNetProfileEntry  

aaaUserNetProfileName 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.8.1.1
The name of this profile.
OBJECT-TYPE    
  DisplayString SIZE(1..32)  

aaaUserNetProfileVlanID 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.8.1.2
The VLAN id for this profile.
OBJECT-TYPE    
  INTEGER 1..4094  

aaaUserNetProfileRowStatus 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.8.1.3
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

aaaUserNetProfileHICflag 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.8.1.4
The flag to indicate if HIC is enabled (1) or disabled (2).
OBJECT-TYPE    
  INTEGER 1..2  

aaaUserNetProfileQosPolicyListName 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.8.1.5
The name of the QoS Policy List name that will be used if this User Network Profile is applied for a given device along with aaaUserNetProfileVlanID.
OBJECT-TYPE    
  DisplayString SIZE(1..32)  

aaaRadAgentConfig 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.9
The Agent Config Information 1 -- Default(Loopback0 or closest IP) 2 -- Non Loopback0 3 -- Interface IP Specified by User This object has been obsoleted. Use the alaIpManagedIntfEntry objects in AlcatelIND1Ip.mib
OBJECT-TYPE    
  INTEGER 1..3  

aaaRadAgentIP 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.10
The Agent IP Address in Radius Packets. This object has been obsoleted. Use the alaIpManagedIntfEntry objects in AlcatelIND1Ip.mib
OBJECT-TYPE    
  IpAddress  

aaaHicConfig 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11
OBJECT IDENTIFIER    

aaaHicSvrTable 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.1
This table shows current configuration for each HIC server.
OBJECT-TYPE    
  SEQUENCE OF  
    AaaHicSvrEntry

aaaHicSvrEntry 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.1.1
A HIC server configuration.
OBJECT-TYPE    
  AaaHicSvrEntry  

aaaHicSvrName 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.1.1.1
Name of the server. This name is given by the operator to refer the server.
OBJECT-TYPE    
  SnmpAdminString SIZE(1..31)  

aaaHicSvrIpAddr 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.1.1.2
IP address of the server host.
OBJECT-TYPE    
  IpAddress  

aaaHicSvrPort 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.1.1.3
For HIC server only. Port number for HIC request
OBJECT-TYPE    
  INTEGER 1025..65535  

aaaHicSvrKey 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.1.1.4
The shared secret is a string of characters known to the switch and to the HIC server. It is used to compute the digest to preserve the integrity between the HIC server and the AoS Switch. The secret is stored encrypted using a two way algorithm.
OBJECT-TYPE    
  SnmpAdminString SIZE(1..31)  

aaaHicSvrRowStatus 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.1.1.5
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

aaaHicSvrStatus 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.1.1.6
HIC server status.
OBJECT-TYPE    
  INTEGER down(1), up(2)  

aaaHicAllowedTable 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.2
This table contains the list of allowed/exception IP Addresses the the HIC hosts allowed to access during HIC. Those are the IP addresses of the Remediation/Patch servers, and the Web Agent Download server.
OBJECT-TYPE    
  SEQUENCE OF  
    AaaHicAllowedEntry

aaaHicAllowedEntry 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.2.1
A Remediation server configuration.
OBJECT-TYPE    
  AaaHicAllowedEntry  

aaaHicAllowedName 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.2.1.1
Name of the server. This name is given by the operator to refer the server.
OBJECT-TYPE    
  SnmpAdminString SIZE(1..31)  

aaaHicAllowedIpAddr 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.2.1.2
IP address of the allowed entry.
OBJECT-TYPE    
  IpAddress  

aaaHicAllowedIpMask 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.2.1.3
IP Mask of the allowed entry.
OBJECT-TYPE    
  IpAddress  

aaaHicAllowedRowStatus 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.2.1.4
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

aaaHicOverrideTable 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.3
This table shows list of MAC addresses that overrides the existing HIC status.
OBJECT-TYPE    
  SEQUENCE OF  
    AaaHicOverrideEntry

aaaHicOverrideEntry 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.3.1
HIC MAC override list configuration.
OBJECT-TYPE    
  AaaHicOverrideEntry  

aaaHicOverrideMac 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.3.1.1
Static MAC address index to each override entry.
OBJECT-TYPE    
  MacAddress  

aaaHicOverrideStatus 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.3.1.2
Overriding status of each static MAC address.
OBJECT-TYPE    
  INTEGER enforce(1), bypass(2)  

aaaHicOverrideRowStatus 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.3.1.3
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

aaaHicHostTable 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.4
This table shows list of HIC Hosts and their active HIC status.
OBJECT-TYPE    
  SEQUENCE OF  
    AaaHicHostEntry

aaaHicHostEntry 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.4.1
HIC Host status information.
OBJECT-TYPE    
  AaaHicHostEntry  

aaaHicHostMac 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.4.1.1
Static MAC address index to each override entry.
OBJECT-TYPE    
  MacAddress  

aaaHicHostStatus 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.4.1.2
HIC status of each HIC Host.
OBJECT-TYPE    
  INTEGER inprogress(1), success(2), fail(3), timeout(4)  

aaaHicConfigInfo 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.5
OBJECT IDENTIFIER    

aaaHicStatus 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.5.1
HIC Status. The HIC server has to be configured before HIC can be enabled.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

aaaHicAllowed1Name 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.5.2
Name of the rem server. This name is given by the operator to refer the remediation server.
OBJECT-TYPE    
  SnmpAdminString SIZE(0..31)  

aaaHicAllowed2Name 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.5.3
Name of the rem server. This name is given by the operator to refer the alternate remediation server.
OBJECT-TYPE    
  SnmpAdminString SIZE(0..31)  

aaaHicAllowed3Name 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.5.4
Name of the rem server. This name is given by the operator to refer the alternate remediation server.
OBJECT-TYPE    
  SnmpAdminString SIZE(0..31)  

aaaHicAllowed4Name 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.5.5
Name of the rem server. This name is given by the operator to refer the alternate remediation server.
OBJECT-TYPE    
  SnmpAdminString SIZE(0..31)  

aaaHicWebAgentDownloadUrl 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.5.6
The URL for web agent download.
OBJECT-TYPE    
  SnmpAdminString SIZE(0..127)  

aaaHicCustomHttpProxyPort 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.11.5.7
The custom HTTP port for QoS to intercept the host's initial HTTP request.
OBJECT-TYPE    
  INTEGER 1025..65535  

aaaUNPIpNetRuleTable 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.12
A list of IP network address rules. This is used to match the InetAddress of a packet to a User Network Profile entry.
OBJECT-TYPE    
  SEQUENCE OF  
    AaaUNPIpNetRuleEntry

aaaUNPIpNetRuleEntry 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.12.1
An IP network address rule entry.
OBJECT-TYPE    
  AaaUNPIpNetRuleEntry  

aaaUNPIpNetRuleAddrType 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.12.1.1
The IP network address type used for VLAN classification. For now Only IPv4 is supported.
OBJECT-TYPE    
  InetAddressType  

aaaUNPIpNetRuleAddr 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.12.1.2
The IP network address used for VLAN classification. Only IPv4 is supported.
OBJECT-TYPE    
  InetAddress  

aaaUNPIpNetRuleMask 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.12.1.3
The IP network mask applying to the IP network address.
OBJECT-TYPE    
  InetAddress  

aaaUNPIpNetRuleProfileName 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.12.1.4
The profile name in the User Network Profile Table to be applied.
OBJECT-TYPE    
  SnmpAdminString SIZE(1..32)  

aaaUNPIpNetRuleRowStatus 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.12.1.5
Row Status for creating/deleting rules.
OBJECT-TYPE    
  RowStatus  

aaaUNPMacRuleTable 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.13
A list of MAC address rules. This is used to match the MAC Address of a packet to a User Network Profile entry
OBJECT-TYPE    
  SEQUENCE OF  
    AaaUNPMacRuleEntry

aaaUNPMacRuleEntry 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.13.1
A MAC rule entry.
OBJECT-TYPE    
  AaaUNPMacRuleEntry  

aaaUNPMacRuleAddr 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.13.1.1
The MAC address used for VLAN classification.
OBJECT-TYPE    
  MacAddress  

aaaUNPMacRuleProfileName 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.13.1.2
The profile name in the User Network Profile Table to be applied.
OBJECT-TYPE    
  SnmpAdminString SIZE(1..32)  

aaaUNPMacRuleRowStatus 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.13.1.3
Row Status for creating/deleting rules.
OBJECT-TYPE    
  RowStatus  

aaaUNPMacRangeRuleTable 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.14
A list of MAC range rules. This is used to match the MAC Address Range of a packet to a User Network Profile entry.
OBJECT-TYPE    
  SEQUENCE OF  
    AaaUNPMacRangeRuleEntry

aaaUNPMacRangeRuleEntry 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.14.1
A MAC range rule entry.
OBJECT-TYPE    
  AaaUNPMacRangeRuleEntry  

aaaUNPMacRangeRuleLoAddr 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.14.1.1
The lower bound of MAC address range used for VLAN classification.
OBJECT-TYPE    
  MacAddress  

aaaUNPMacRangeRuleHiAddr 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.14.1.2
The upper bound of MAC address range used for VLAN classification.
OBJECT-TYPE    
  MacAddress  

aaaUNPMacRangeRuleProfileName 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.14.1.3
The profile name in the User Network Profile Table to be applied.
OBJECT-TYPE    
  SnmpAdminString SIZE(1..32)  

aaaUNPMacRangeRuleRowStatus 1.3.6.1.4.1.6486.800.1.2.1.15.1.1.14.1.4
Row Status for creating/deleting rules.
OBJECT-TYPE    
  RowStatus  

alcatelIND1AAAMIBConformance 1.3.6.1.4.1.6486.800.1.2.1.15.1.2
Branch For Authentication, Authorization, and Accounting (AAA) Subsystem Conformance Information.
OBJECT-IDENTITY    

alcatelIND1AAAMIBGroups 1.3.6.1.4.1.6486.800.1.2.1.15.1.2.1
Branch For Authentication, Authorization, and Accounting (AAA) Subsystem Units Of Conformance.
OBJECT-IDENTITY    

aaaServerMIBGroup 1.3.6.1.4.1.6486.800.1.2.1.15.1.2.1.1
Collection of objects for management of AAA Server.
OBJECT-GROUP    

aaaAuthAcctGroup 1.3.6.1.4.1.6486.800.1.2.1.15.1.2.1.2
Collection of objects for management of AAA Authentication Accounting.
OBJECT-GROUP    

aaaUserMIBGroup 1.3.6.1.4.1.6486.800.1.2.1.15.1.2.1.3
Collection of objects for management of AAA User Local Database.
OBJECT-GROUP    

aaaHicGroup 1.3.6.1.4.1.6486.800.1.2.1.15.1.2.1.4
Collection of objects for management of AAA HIC.
OBJECT-GROUP    

aaaTrapsGroup 1.3.6.1.4.1.6486.800.1.2.1.15.1.2.1.5
Collection of Traps for AAA HIC servers.
NOTIFICATION-GROUP    

alcatelIND1AAAMIBCompliances 1.3.6.1.4.1.6486.800.1.2.1.15.1.2.2
Branch For Authentication, Authorization, and Accounting (AAA) Subsystem Compliance Statements.
OBJECT-IDENTITY    

alcatelIND1AAAMIBCompliance 1.3.6.1.4.1.6486.800.1.2.1.15.1.2.2.1
Compliance statement for Authentication, Authorization, and Accounting (AAA) Subsystem.
MODULE-COMPLIANCE    

alaAaaTrapsDesc 1.3.6.1.4.1.6486.800.1.3.2.21.1
OBJECT IDENTIFIER    

alaAaaTrapsDescRoot 1.3.6.1.4.1.6486.800.1.3.2.21.1.0
OBJECT IDENTIFIER    

aaaHicServerTrap 1.3.6.1.4.1.6486.800.1.3.2.21.1.0.1
AAA HIC server down Trap is sent when the HIC server is down.
NOTIFICATION-TYPE    
  aaaHSvrIpAddress  

alaAaaTrapsObj 1.3.6.1.4.1.6486.800.1.3.2.21.2
OBJECT IDENTIFIER    

aaaHSvrIpAddress 1.3.6.1.4.1.6486.800.1.3.2.21.2.1
HIC/Rem/WebDL server's IP address.
OBJECT-TYPE    
  IpAddress  

Defined Objects

AaaServerEntry  
SEQUENCE    
  DisplayString as aaasName  
  INTEGER as aaasProtocol  
  DisplayString as aaasHostName  
  IpAddress as aaasIpAddress  
  DisplayString as aaasHostName2  
  IpAddress as aaasIpAddress2  
  INTEGER as aaasRetries  
  INTEGER as aaasTimout  
  DisplayString as aaasRadKey  
  INTEGER as aaasRadAuthPort  
  INTEGER as aaasRadAcctPort  
  INTEGER as aaasLdapPort  
  DisplayString as aaasLdapDn  
  DisplayString as aaasLdapPasswd  
  DisplayString as aaasLdapSearchBase  
  INTEGER as aaasLdapServType  
  INTEGER as aaasLdapEnableSsl  
  INTEGER as aaasAceClear  
  RowStatus as aaasRowStatus  
  DisplayString as aaasTacacsKey  
  INTEGER as aaasTacacsPort  
  INTEGER as aaasHttpPort  
  DisplayString as aaasHttpDirectory  
  DisplayString as aaasHttpProxyHostName  
  IpAddress as aaasHttpProxyIpAddress  
  INTEGER as aaasHttpProxyPort  
  DisplayString as aaasVrfName  

AaaAuthVlanEntry  
SEQUENCE    
  INTEGER as aaatvVlan  
  DisplayString as aaatvName1  
  DisplayString as aaatvName2  
  DisplayString as aaatvName3  
  DisplayString as aaatvName4  
  RowStatus as aaatvRowStatus  
  INTEGER as aaatvCertificate  

AaaAuthSAEntry  
SEQUENCE    
  INTEGER as aaatsInterface  
  DisplayString as aaatsName1  
  DisplayString as aaatsName2  
  DisplayString as aaatsName3  
  DisplayString as aaatsName4  
  RowStatus as aaatsRowStatus  
  INTEGER as aaatsCertificate  

AaaAcctVlanEntry  
SEQUENCE    
  INTEGER as aaacvVlan  
  DisplayString as aaacvName1  
  DisplayString as aaacvName2  
  DisplayString as aaacvName3  
  DisplayString as aaacvName4  
  RowStatus as aaacvRowStatus  

AaaAcctSAEntry  
SEQUENCE    
  INTEGER as aaacsInterface  
  DisplayString as aaacsName1  
  DisplayString as aaacsName2  
  DisplayString as aaacsName3  
  DisplayString as aaacsName4  
  RowStatus as aaacsRowStatus  

AaaAuth8021xEntry  
SEQUENCE    
  INTEGER as aaatxInterface  
  DisplayString as aaatxName1  
  DisplayString as aaatxName2  
  DisplayString as aaatxName3  
  DisplayString as aaatxName4  
  INTEGER as aaatxOpen  
  RowStatus as aaatxRowStatus  

AaaAcct8021xEntry  
SEQUENCE    
  INTEGER as aaacxInterface  
  DisplayString as aaacxName1  
  DisplayString as aaacxName2  
  DisplayString as aaacxName3  
  DisplayString as aaacxName4  
  RowStatus as aaacxRowStatus  

AaaPkiEntry  
SEQUENCE    
  INTEGER as aaatpInterface  
  DisplayString as aaatpName1  
  DisplayString as aaatpName2  
  DisplayString as aaatpName3  
  DisplayString as aaatpName4  
  INTEGER as aaatpLevel  
  RowStatus as aaatpRowStatus  

AaaAuthMACEntry  
SEQUENCE    
  INTEGER as aaaMacInterface  
  DisplayString as aaaMacSrvrName1  
  DisplayString as aaaMacSrvrName2  
  DisplayString as aaaMacSrvrName3  
  DisplayString as aaaMacSrvrName4  
  RowStatus as aaaMacSrvrRowStatus  

AaaAcctCmdEntry  
SEQUENCE    
  INTEGER as aaacmdInterface  
  DisplayString as aaacmdSrvName1  
  DisplayString as aaacmdSrvName2  
  DisplayString as aaacmdSrvName3  
  DisplayString as aaacmdSrvName4  
  RowStatus as aaacmdRowStatus  

AaaUserEntry  
SEQUENCE    
  DisplayString as aaauUserName  
  DisplayString as aaauPassword  
  Unsigned32 as aaauReadRight1  
  Unsigned32 as aaauReadRight2  
  Unsigned32 as aaauWriteRight1  
  Unsigned32 as aaauWriteRight2  
  INTEGER as aaauProfile  
  INTEGER as aaauSnmpLevel  
  OCTET STRING as aaauSnmpAuthKey  
  RowStatus as aaauRowStatus  
  DisplayString as aaauOldPassword  
  DisplayString as aaauEndUserProfile  
  DisplayString as aaauPasswordExpirationDate  
  INTEGER as aaauPasswordExpirationInMinute  
  DisplayString as aaauPasswordAllowModifyDate  
  INTEGER as aaauPasswordLockoutEnable  
  INTEGER as aaauBadAtempts  

AaaAuthenticatedUserEntry  
SEQUENCE    
  MacAddress as aaaaMacAddress  
  DisplayString as aaaaUserName  
  INTEGER as aaaaSlot  
  INTEGER as aaaaPort  
  INTEGER as aaaaVlan  
  INTEGER as aaaaDrop  

AaaAvlanAddressEntry  
SEQUENCE    
  INTEGER as aaaAvlanId  
  IpAddress as aaaAvlanIpAddress  

AaaUserNetProfileEntry  
SEQUENCE    
  DisplayString as aaaUserNetProfileName  
  INTEGER as aaaUserNetProfileVlanID  
  RowStatus as aaaUserNetProfileRowStatus  
  INTEGER as aaaUserNetProfileHICflag  
  DisplayString as aaaUserNetProfileQosPolicyListName  

AaaHicSvrEntry  
SEQUENCE    
  SnmpAdminString as aaaHicSvrName  
  IpAddress as aaaHicSvrIpAddr  
  INTEGER as aaaHicSvrPort  
  SnmpAdminString as aaaHicSvrKey  
  RowStatus as aaaHicSvrRowStatus  
  INTEGER as aaaHicSvrStatus  

AaaHicAllowedEntry  
SEQUENCE    
  SnmpAdminString as aaaHicAllowedName  
  IpAddress as aaaHicAllowedIpAddr  
  IpAddress as aaaHicAllowedIpMask  
  RowStatus as aaaHicAllowedRowStatus  

AaaHicOverrideEntry  
SEQUENCE    
  MacAddress as aaaHicOverrideMac  
  INTEGER as aaaHicOverrideStatus  
  RowStatus as aaaHicOverrideRowStatus  

AaaHicHostEntry  
SEQUENCE    
  MacAddress as aaaHicHostMac  
  INTEGER as aaaHicHostStatus  

AaaUNPIpNetRuleEntry  
SEQUENCE    
  InetAddressType as aaaUNPIpNetRuleAddrType  
  InetAddress as aaaUNPIpNetRuleAddr  
  InetAddress as aaaUNPIpNetRuleMask  
  SnmpAdminString as aaaUNPIpNetRuleProfileName  
  RowStatus as aaaUNPIpNetRuleRowStatus  

AaaUNPMacRuleEntry  
SEQUENCE    
  MacAddress as aaaUNPMacRuleAddr  
  SnmpAdminString as aaaUNPMacRuleProfileName  
  RowStatus as aaaUNPMacRuleRowStatus  

AaaUNPMacRangeRuleEntry  
SEQUENCE    
  MacAddress as aaaUNPMacRangeRuleLoAddr  
  MacAddress as aaaUNPMacRangeRuleHiAddr  
  SnmpAdminString as aaaUNPMacRangeRuleProfileName  
  RowStatus as aaaUNPMacRangeRuleRowStatus