
| SNMPv2-SMI | ENTITY-MIB | ALCATEL-IND1-BASE |
| SNMP-FRAMEWORK-MIB | SNMPv2-TC | SNMPv2-CONF |
| alcatelIND1ChassisPhysMIBObjects | 1.3.6.1.4.1.6486.800.1.1.1.1.1 | ||
| Branch For Chassis Supervision Chassis Physical MIB Subsystem Managed Objects. | |||
| OBJECT-IDENTITY | |||
| chasEntPhysicalTable | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1 | ||
| This table contains one row per physical entity. It is an extension for the entity physical table (rfc 2737) that is instantiated for every physical entity object. The fields are not always significant for every object. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ChasEntPhysicalEntry | |||
| chasEntPhysicalEntry | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1 | ||
| Information about a particular physical entity. | |||
| OBJECT-TYPE | |||
| ChasEntPhysicalEntry | |||
| chasEntPhysAdminStatus | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.1 | ||
| All modules (even empty slots) are in unknown state when the chassis first powers up. Chassis status possible value: powerOn <=> powered up Control Module possible value: powerOn <=> CM up and running reset <=> CM reset takeover <=> Secondary CM takes over resetAll <=> resets the whole switch NI status possible value: powerOn <=> NI is either powered (up or down) or waiting to be powered whenever more power is available. This admin status has not full meaning without chasEntPhysOperStatus powerOff <=> NI down and unpowered and NI will not be powered until user requests it, a failover happens or a reboot happens reset <=> NI reset FABRIC status possible value: powerOn <=> FABRIC is powered powerOff <=> FABRIC is unpowered standby <=> FABRIC is powered and requested to be redundant (inactive) Daughter board status possible value: powerOn <=> DB up and running reset <=> DB reset (TO BE CONFIRMED) Power supply status possible value: powerOn <=> PS up | |||
| OBJECT-TYPE | |||
| INTEGER | unknown(1), powerOff(2), powerOn(3), reset(4), takeover(5), resetAll(6), standby(7), resetWithFabric(8), takeoverWithFabrc(9) | ||
| chasEntPhysOperStatus | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.2 | ||
| All modules (even empty slots) are in unknown state when the chassis first powers up. Chassis status possible value : up <=> powered up Control Module possible value : notPresent <=> CM not present up <=> CM up and running down <=> CM down and powered secondary <=> CM in secondary mode and running NI status possible value : notPresent <=> NI not present up <=> NI up and running down <=> NI down and powered unpowered <=> NI unpowered because there is not enough power in the system (chasEntPhysAdminStatus = powerOn) or because the NI has to be OFF (chasEntPhysAdminStatus = powerOff). This operational status has not full meaning without chasEntPhysAdminStatus Fabric status possible value : master <=> up and acting as master up <=> up and acting as slave secondary <=> secondary mode for redundancy Daughter board status possible value : notPresent <=> DB not present up <=> DB up and running down <=> DB down and powered Power supply status possible value : notPresent <=> PS not present up <=> PS up | |||
| OBJECT-TYPE | |||
| INTEGER | up(1), down(2), testing(3), unknown(4), secondary(5), notPresent(6), unpowered(7), master(8) | ||
| chasEntPhysLedStatus | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.3 | ||
| This object has been deprecated because the other enumerated objects can provide the same information. A get to this object will return 0. The status of each of the LEDs of this module. Fuji CFM: [31:30] BPSU amber 00=off 01=on 10=reserved 11=blinking [29:28] PSU green 00=off 01=on 10=reserved 11=blinking [27:26] PSU amber 00=off 01=on 10=reserved 11=blinking [25:24] PSU green 00=off 01=on 10=reserved 11=blinking [23:22] Fan amber 00=off 01=on 10=reserved 11=blinking [21:20] Fan green 00=off 01=on 10=reserved 11=blinking [19:18] Temp amber 00=off 01=on 10=reserved 11=blinking [17:16] Temp green 00=off 01=on 10=reserved 11=blinking [15:14] Fabric amber 00=off 01=on 10=reserved 11=blinking [13:12] Fabric green 00=off 01=on 10=reserved 11=blinking [11:10] Control amber 00=off 01=on 10=reserved 11=blinking [9:8] Control green 00=off 01=on 10=reserved 11=blinking [7:6] OK2 amber 00=off 01=on 10=reserved 11=blinking [5:4] OK2 green 00=off 01=on 10=reserved 11=blinking [3:2] OK1 amber 00=off 01=on 10=reserved 11=blinking [1:0] OK1 green 00=off 01=on 10=reserved 11=blinking Falcon CMM: [11] Fan 1=Green (ok) 0=amber (fail) [10] Temperature 1=Green (ok) 0=amber (fail) [9] Secondary CMM 1=amber 0=OFF [8] Primary CMM 1=amber 0=OFF [7:6] OK2 amber 00=off 01=on 10=blink 11=reserved [5:4] OK2 green 00=off 01=on 10=blink 11=reserved [3:2] OK1 amber 00=off 01=on 10=blink 11=reserved [1:0] OK1 green 00=off 01=on 10=blink 11=reserved Eagle CMM: [17:16] Fan 3 (rear) 00=amber 01=green 10=blink 11=reserved [15:14] Fan 2 (top right) 00=amber 01=green 10=blink 11=reserved [13:12] Fan 1 (top left) 00=amber 01=green 10=blink 11=reserved [11] Status 1=Green (ok) 0=amber (fail) [10] Temperature 1=Green (ok) 0=amber (fail) [9] Secondary CMM 1=amber 0=OFF [8] Primary CMM 1=amber 0=OFF [7:6] OK2 amber 00=off 01=on 10=blink 11=reserved [5:4] OK2 green 00=off 01=on 10=blink 11=reserved [3:2] OK1 amber 00=off 01=on 10=blink 11=reserved [1:0] OK1 green 00=off 01=on 10=blink 11=reserved Hawk Stack: [19] fanGroup 1=Green (ok) 0=amber (fail) [18] internalPS 1=Green (ok) 0=amber (fail) [11] backupPS 1=Green (ok) 0=amber (fail) [10] Temperature 1=Green (ok) 0=amber (fail) [9] Secondary CMM 1=amber 0=OFF [8] Primary CMM 1=amber 0=OFF [7:6] OK2 amber 00=off 01=on 10=blink 11=reserved [5:4] OK2 green 00=off 01=on 10=blink 11=reserved [3:2] OK1 amber 00=off 01=on 10=blink 11=reserved [1:0] OK1 green 00=off 01=on 10=blink 11=reserved NI: [7:6] OK2 amber 00=off 01=on 10=blink 11=reserved [5:4] OK2 green 00=off 01=on 10=blink 11=reserved [3:2] OK1 amber 00=off 01=on 10=blink 11=reserved [1:0] OK1 green 00=off 01=on 10=blink 11=reserved FABRIC (Eagle Only): [7:6] OK2 Yellow LED 01=on 00=off 10=blink 11=reserved [5:4] OK2 Green LED 01=on 00=off 10=blink 11=reserved [3:2] OK1 Yellow LED 01=on 00=off 10=blink 11=reserved [1:0] OK1 Green LED 01=on 00=off 10=blink 11=reserved NOTE: Due to European regulation, the LEDs will NEVER be illuminated RED! They in fact will be either green OR amber. | |||
| OBJECT-TYPE | |||
| BITS | ok1GreenLSBit(0), ok1GreenMSBit(1), ok1AmberLSBit(2), ok1AmberMSBit(3), ok2GreenLSBit(4), ok2GreenMSBit(5), ok2AmberLSBit(6), ok2AmberMSBit(7), controlGreenLSBit(8), controlGreenMSBit(9), controlAmberLSBIt(10), controlAmberMSBIt(11), fabricGreenLSBit(12), fabricGreenMSBit(13), fabricAmberLSBit(14), fabricAmberMSBit(15), tempGreenLSBit(16), tempGreenMSBit(17), tempAmberLSBit(18), tempAmberMSBit(19), fanGreenLSBit(20), fanGreenMSBit(21), fanAmberLSBit(22), fanAmberMSBit(23), powerSupGreenLSBit(24), powerSupGreenMSBit(25), powerSupAmberLSBit(26), powerSupAmberMSBit(27), backupPowerSupGreenLSBit(28), backupPowerSupGreenMSBit(29), backupPowerSupAmberLSBit(30), backupPowerSupAmberMSBit(31) | ||
| chasEntPhysPower | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.4 | ||
| This value is only applicable to the NI, PS and Control Modules. It corresponds to a a static value for the power consumption of an NI module or Control Module. This value is in Watts. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| chasEntPhysModuleType | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.5 | ||
| This object is the unique Module Type or ID from the entities eeprom. This value is guarrantteed to be unique to each type of Module. This value is only intended for Alcatel internal use. | |||
| OBJECT-TYPE | |||
| SnmpAdminString | |||
| chasEntPhysMfgDate | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.6 | ||
| This object contains the manufacturing date of the entity. Its format is mmm dd yyyy : NOV 27 2001. | |||
| OBJECT-TYPE | |||
| SnmpAdminString | SIZE(0..11) | ||
| chasEntPhysPartNumber | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.7 | ||
| This object contains the Alcatel Part Number for the entity. This value is used to identify what is needed when placing orders with Alcatel. | |||
| OBJECT-TYPE | |||
| SnmpAdminString | SIZE(0..16) | ||
| chasEntPhysLedStatusOk1 | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.8 | ||
| Chassis Management Module (CMM) front panel LED OK1 status indication | |||
| OBJECT-TYPE | |||
| ChasEntPhysLed | |||
| chasEntPhysLedStatusOk2 | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.9 | ||
| Chassis Management Module (CMM) front panel LED OK2 status indication | |||
| OBJECT-TYPE | |||
| ChasEntPhysLed | |||
| chasEntPhysLedStatusPrimaryCMM | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.10 | ||
| Chassis Management Module (CMM) front panel LED Primary chassis indication | |||
| OBJECT-TYPE | |||
| ChasEntPhysLed | |||
| chasEntPhysLedStatusSecondaryCMM | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.11 | ||
| Chassis Management Module (CMM) front panel LED Secondary chassis indication | |||
| OBJECT-TYPE | |||
| ChasEntPhysLed | |||
| chasEntPhysLedStatusTemperature | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.12 | ||
| Chassis Management Module (CMM) front panel LED temperature status indication | |||
| OBJECT-TYPE | |||
| ChasEntPhysLed | |||
| chasEntPhysLedStatusFan | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.13 | ||
| For Hawk stacks used as a fan group status LED. For eagle CMM's user instead: Fan 1 (top left), Fan 2 (top right), Fan 3 (rear) | |||
| OBJECT-TYPE | |||
| ChasEntPhysLed | |||
| chasEntPhysLedStatusFan1 | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.14 | ||
| Chassis fan status, Eagle (top left), Fuji (top right) | |||
| OBJECT-TYPE | |||
| ChasEntPhysLed | |||
| chasEntPhysLedStatusFan2 | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.15 | ||
| Chassis fan status, Eagle (top right), Fuji (middle right) | |||
| OBJECT-TYPE | |||
| ChasEntPhysLed | |||
| chasEntPhysLedStatusFan3 | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.16 | ||
| Chassis fan status, Eagle (rear), Fuji (bottom right) | |||
| OBJECT-TYPE | |||
| ChasEntPhysLed | |||
| chasEntPhysLedStatusBackupPS | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.17 | ||
| Chassis backup power supply status indication | |||
| OBJECT-TYPE | |||
| ChasEntPhysLed | |||
| chasEntPhysLedStatusInternalPS | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.18 | ||
| Chassis internal power supply status indication | |||
| OBJECT-TYPE | |||
| ChasEntPhysLed | |||
| chasEntPhysLedStatusControl | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.19 | ||
| Chassis control status | |||
| OBJECT-TYPE | |||
| ChasEntPhysLed | |||
| chasEntPhysLedStatusFabric | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.20 | ||
| Chassis Management Module (CMM) Fabric status indication | |||
| OBJECT-TYPE | |||
| ChasEntPhysLed | |||
| chasEntPhysLedStatusPSU | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.21 | ||
| Chassis Power Supply Unit status indication | |||
| OBJECT-TYPE | |||
| ChasEntPhysLed | |||
| chasEntPhysAsicRev | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.22 | ||
| This object contains the ASIC revision Number of the ni entity | |||
| OBJECT-TYPE | |||
| SnmpAdminString | SIZE(0..14) | ||
| chasEntPhysCpldRev | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.23 | ||
| This object contains the CPLD revision Number of the ni entity | |||
| OBJECT-TYPE | |||
| SnmpAdminString | SIZE(0..14) | ||
| chasEntPhysDefaultMinibootRev | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.24 | ||
| This object contains the default miniboot version Number of the ni entity | |||
| OBJECT-TYPE | |||
| SnmpAdminString | SIZE(0..14) | ||
| chasEntPhysBackUpMinibootRev | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.25 | ||
| This object contains the backup miniboot version Number of the ni entity | |||
| OBJECT-TYPE | |||
| SnmpAdminString | SIZE(0..14) | ||
| chasEntPhysBootromRev | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.26 | ||
| This object contains the bootrom version Number of the ni entity | |||
| OBJECT-TYPE | |||
| SnmpAdminString | SIZE(0..14) | ||
| chasEntPhysNiNum | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.27 | ||
| This value is only applicable to the NI. It indicates an NI associated with this physicalEntry | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| chasEntPhysGbicNum | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.28 | ||
| This value is only applicable to the NI. It indicates a gbic associated with this ni | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| chasEntPhysWaveLen | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.29 | ||
| This object contains the wave length of a SFP device | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| chasEntPhysUbootRev | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.30 | ||
| This object contains the uboot version Number of the ni entity | |||
| OBJECT-TYPE | |||
| SnmpAdminString | SIZE(0..14) | ||
| chasEntPhysUbootMinibootRev | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.31 | ||
| This object contains the uboot miniboot version Number of the ni entity | |||
| OBJECT-TYPE | |||
| SnmpAdminString | SIZE(0..14) | ||
| chasEntPhysMacAddress | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.32 | ||
| This object contains the MAC address of the ni entity | |||
| OBJECT-TYPE | |||
| MacAddress | |||
| chasEntPhysPoeSwVersion | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.33 | ||
| This object contains the POE SW Revision of the ni entity | |||
| OBJECT-TYPE | |||
| SnmpAdminString | SIZE(0..16) | ||
| chasEntPhysC20LFailCont | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.34 | ||
| This object contains the C20L upgrade failure count of the ni entity | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| chasEntPhysCpuModel | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.35 | ||
| This object contains the model description of the cmm/ni cpu | |||
| OBJECT-TYPE | |||
| SnmpAdminString | SIZE(0..32) | ||
| chasEntPhysPowerType | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.36 | ||
| This object specifies the type(AC/DC) of power supply. | |||
| OBJECT-TYPE | |||
| ChasEntPhysPowerType | |||
| chasEntPhysPowerControlChecksum | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.37 | ||
| This object specifies the power control checksum. | |||
| OBJECT-TYPE | |||
| SnmpAdminString | |||
| alcatelIND1ChassisPhysMIBConformance | 1.3.6.1.4.1.6486.800.1.1.1.1.2 | ||
| Branch For Chassis Supervision Chassis Physical MIB Subsystem Conformance Information. | |||
| OBJECT-IDENTITY | |||
| alcatelIND1ChassisPhysMIBGroups | 1.3.6.1.4.1.6486.800.1.1.1.1.2.1 | ||
| Branch For Chassis Supervision Chassis Physical MIB Subsystem Units Of Conformance. | |||
| OBJECT-IDENTITY | |||
| chasEntPhysicalGroup | 1.3.6.1.4.1.6486.800.1.1.1.1.2.1.1 | ||
| Chassis (inclosure) Entity Physical Group. | |||
| OBJECT-GROUP | |||
| chassisPhysNotificationGroup | 1.3.6.1.4.1.6486.800.1.1.1.1.2.1.2 | ||
| Chassis Supervision Physical Notification Group. | |||
| NOTIFICATION-GROUP | |||
| alcatelIND1ChassisPhysMIBCompliances | 1.3.6.1.4.1.6486.800.1.1.1.1.2.2 | ||
| Branch For Chassis Supervision Chassis Physical MIB Subsystem Compliance Statements. | |||
| OBJECT-IDENTITY | |||
| alcatelIND1ChassisPhysMIBCompliance | 1.3.6.1.4.1.6486.800.1.1.1.1.2.2.1 | ||
| Compliance statement for Chassis Supervision Physical. | |||
| MODULE-COMPLIANCE | |||
| alcatelIND1ChassisMIB | 1.3.6.1.4.1.6486.800.1.1.1.3.1 | ||
| This module describes an authoritative enterprise-specific Simple etwork Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line, this is the Chassis Supervision Chassis MIB for managing physical chassis objects not covered in the IETF Entity MIB (rfc 2737). The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE | |||
| MODULE-IDENTITY | |||
| alcatelIND1ChassisMIBObjects | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1 | ||
| Branch For Chassis Supervision Chassis MIB Subsystem Managed Objects. | |||
| OBJECT-IDENTITY | |||
| chasControlModuleTable | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1 | ||
| This table contains one row for the primary control module. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ChasControlModuleEntry | |||
| chasControlModuleEntry | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1 | ||
| Information about the primary control module. This table is an extension of the entity physical table but this class is instanciated only for a the primary control module that has a particular Index. | |||
| OBJECT-TYPE | |||
| ChasControlModuleEntry | |||
| chasControlRunningVersion | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.1 | ||
| Identification of the Running Version (or Running Configuration) for the control module. Note that the Running Version value of (1) unknown, (2) working, or (3) certified is returned. | |||
| OBJECT-TYPE | |||
| INTEGER | unknown(1), working(2), certified(3) | ||
| chasControlActivateTimeout | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.2 | ||
| This value is in seconds. It represents how much time before the switch automatically falls back to the certified version. This value is set via the Activate(reload working) cli command. An Activate reboot must be initiated via the primary CMM and that the timeout value can be accessed via user interface to the primary CMM only. After the Activate reboot has been initiated, a timeout will occur (i.e., an Activate Timeout) at the timeout value specified by the user. If a reboot cancel has not been received prior to the timeout expiration, the primary CMM will automatically reboot (i.e., re-reboot) using the certified configuration. This ensures that an automatic backup reboot is available using the certified configuration in the event that the user is unable to interface with primary CMM as a result of the attempted Activate reboot. If the Activate reboot is successful, the user cancels the backup reboot via the normal reboot cancellation process (i.e., a zero value is written for the object chasControlDelayedRebootTimer). | |||
| OBJECT-TYPE | |||
| INTEGER | 0..900 | ||
| chasControlVersionMngt | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.3 | ||
| For the primary this means: notSignificant - No command applied. certifySynchro - Copy the file from the working to the certified directory and from the primary to the secondary (reboot of the secondary). certifyNoSynchro - Copy the file from the working to the certified directory. flashSynchro - Copy the file from the primary to the secondary (reboot of the secondary). restore - Copy the file from the certified directory to the working directory. activate - Reload from the working directory. Activate can be scheduled. issu - In Service Software Upgrade (ISSU). Process can scheduled. | |||
| OBJECT-TYPE | |||
| INTEGER | notSignificant(1), certifySynchro(2), certifyNoSynchro(3), flashSynchro(4), restore(5), activate(6), issu(7) | ||
| chasControlDelayedActivateTimer | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.4 | ||
| Timer value in seconds used to initiate a delayed activate of the primary CMM. Writing this object to a non-zero value results in CMM reboot of the working directory following expiration of the specified activate timer delay. Writing this object to zero results in an immediately activate process. It is now adjusted to wait a maximum of 366 days. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..31622400 | ||
| chasControlCertifyStatus | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.5 | ||
| Returned value indicates if the control module has been certified (that is the working directory matches the certified directory) | |||
| OBJECT-TYPE | |||
| INTEGER | unknown(1), needCertify(2), certified(3) | ||
| chasControlSynchronizationStatus | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.6 | ||
| Returned value indicates if the control module has been synchronized (that is the working directory matches the working directory on the other control module(s) if present). Returned value is monoControlModule when no other control module is present. | |||
| OBJECT-TYPE | |||
| INTEGER | unknown(1), monoControlModule(2), notSynchronized(3), synchronized(4) | ||
| chasControlAcrossCmmWorkingSynchroStatus | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.7 | ||
| Returned value indicates if the /working has been synchronized across the CMMs (that is the working directory matches the working directory on all CMMs if present) | |||
| OBJECT-TYPE | |||
| INTEGER | unknown(1), monoCMM(2), no(3), yes(4) | ||
| chasControlAcrossCmmCertifiedSynchroStatus | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.8 | ||
| Returned value indicates if the /certified has been synchronized across the CMMs if present) | |||
| OBJECT-TYPE | |||
| INTEGER | unknown(1), monoCMM(2), no(3), yes(4) | ||
| chasControlRedundantTable | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.2 | ||
| This table contains one row per control module. There is always at least one control module in the system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ChasControlRedundantEntry | |||
| chasControlRedundantEntry | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.2.1 | ||
| Information about a particular control module this table is an extension of the entity physical table but this class is instanciated only for a particular type of physical entity: the control module that has a particular Index. | |||
| OBJECT-TYPE | |||
| ChasControlRedundantEntry | |||
| chasControlNumberOfTakeover | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.2.1.1 | ||
| This object is a count of the number of times the control module has changed from primary to secondary mode as a result of a Takeover. Note that this object can be accessed via user interface to either the primary or secondary CMM. The value returned is the number of times that the interfacing control module (either primary or secondary CMM) has changed from primary to secondary mode. This value does not reflect the total number of CMM Takeovers for the switch. To get the total number of Takeovers for the switch, it is necessary to read this value via user interface to each control module independently. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| chasControlDelayedRebootTimer | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.2.1.2 | ||
| Timer value (in seconds) used to initiate a delayed reboot of the primary or secondary CMM using the certified configuration. Writing this object to a non-zero value results in a CMM reboot following expiration of the specified reset timer delay. Writing this object to zero results in cancellation of a pending CMM delayed reboot. It is now adjusted to wait a maximum of 366 days. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..31622400 | ||
| chasChassisTable | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3 | ||
| This table contains one row per chassis. There is always at least one chassis or many like for stackable product. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ChasChassisEntry | |||
| chasChassisEntry | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1 | ||
| Information about a particular control module this table is an extension of the entity physical table but this class is instanciated only for a particular type of physical entity: the control module that has a particular Index. | |||
| OBJECT-TYPE | |||
| ChasChassisEntry | |||
| chasFreeSlots | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.1 | ||
| The number of free NI front panel slots. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..18 | ||
| chasPowerLeft | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.2 | ||
| The power still available on the chassis in Watts. | |||
| OBJECT-TYPE | |||
| INTEGER | -100000..100000 | ||
| chasNumberOfResets | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.3 | ||
| This object is a count of the number of times this station has been reset since a cold-start. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| chasHardwareBoardTemp | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.4 | ||
| This object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for this chassis. This temperature is what is used for comparing to the threshold and determining whether the value is in range. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..200 | ||
| chasHardwareCpuTemp | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.5 | ||
| This object indicates the current output of the SPARC Temperature Sensor (degrees Centigrade) for this chassis. This object is not applicable for Hawk and 0 is returned | |||
| OBJECT-TYPE | |||
| INTEGER | 0..200 | ||
| chasTempRange | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.6 | ||
| Temp Range is the value of the temperature sensor for the chassis. The Temp Range value reflects the temperature of the chassis relative to the Temp Threshold value (i.e., over vs. under the threshold). | |||
| OBJECT-TYPE | |||
| INTEGER | unknown(1), notPresent(2), underThreshold(3), overFirstThreshold(4), overDangerThreshold(5) | ||
| chasTempThreshold | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.7 | ||
| This object is the threshold temperature in degrees Celsius for the chassis. Temp Threshold is the chassis temperature point at which, when reached due to an ascending or descending temperature transition, a temperature notification is provided to the user. When this threshold is exceeded, we start sending traps and other operator notification. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..150 | ||
| chasDangerTempThreshold | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.8 | ||
| This Threshold is a second one which is hardcoded. When the Chassis Exceeds this value it starts shutting down NIs. This value will be set by the factory and not changeable. | |||
| OBJECT-TYPE | |||
| INTEGER | 30..150 | ||
| chasPrimaryPhysicalIndex | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.9 | ||
| This value holds the Entity Table Physical Index for the Control Module that is currently primary. This is to allow snmp managers to determine which Control Module is currently primary so it knows what entry in the chasControlModuleTable to access for setting the chasControlVersionMngt values for controling the switch. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| chasSupervisionRfsLsTable | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4 | ||
| This table contains a list of file on the remote chassis per directory. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ChasSupervisionRfsLsEntry | |||
| chasSupervisionRfsLsEntry | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1 | ||
| Information about a remote file. A row in this table contains a file per directory per chassis | |||
| OBJECT-TYPE | |||
| ChasSupervisionRfsLsEntry | |||
| chasSupervisionRfsLsFileIndex | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.1 | ||
| This value holds file Index for the RFS LS table. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..100 | ||
| chasSupervisionRfsLsSlot | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.2 | ||
| Slot where remote file is located. | |||
| OBJECT-TYPE | |||
| Unsigned32 | |||
| chasSupervisionRfsLsDirName | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.3 | ||
| The remote directory name where remote file is located in | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..255) | ||
| chasSupervisionRfsLsFileName | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.4 | ||
| The file name of remote file | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..33) | ||
| chasSupervisionRfsLsFileType | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.5 | ||
| The Type of a remote file | |||
| OBJECT-TYPE | |||
| INTEGER | file(1), directory(2), undefined(3), tarArchive(4) | ||
| chasSupervisionRfsLsFileSize | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.6 | ||
| size of this remote file | |||
| OBJECT-TYPE | |||
| Unsigned32 | |||
| chasSupervisionRfsLsFileAttr | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.7 | ||
| attributes of this remote file | |||
| OBJECT-TYPE | |||
| INTEGER | undefined(1), readOnly(2), readWrite(3), writeOnly(4) | ||
| chasSupervisionRfsLsFileDateTime | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.8 | ||
| the modification date and time of a remote file | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..16) | ||
| alcatelIND1ChassisSupervisionRfsCommands | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5 | ||
| Branch For Chassis Supervision RFS commands. For rrm command the Slot, Command and SrcFileName are mandatory. For rcp command the Slot, Command, SrcFileName and DestFileName are mandatory. For rdf command the Slot and Command are mandatory | |||
| OBJECT-IDENTITY | |||
| chasSupervisionRfsCommandsSlot | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5.1 | ||
| Slot where RFS command should be executed. | |||
| OBJECT-TYPE | |||
| Unsigned32 | |||
| chasSupervisionRfsCommandsCommand | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5.2 | ||
| This object identifies which of the above Actions is to be performed. The commands are as follows: - rrm Remote file remove - rcp Remote file copy - rls Remote directory listing - rdf Remote flash disk space free | |||
| OBJECT-TYPE | |||
| INTEGER | notSignificant(0), rrm(1), rcp(2), rls(3), rdf(4), reserved(5) | ||
| chasSupervisionRfsCommandsSrcFileName | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5.3 | ||
| The remote file for where the RFS action is executed. This includes also the path so directory name and file name. This object is used when command set to rrm or rcp. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..255) | ||
| chasSupervisionRfsCommandsDestFileName | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5.4 | ||
| The destination file for where the RFS action is executed. This includes also the path so directory name and file name. This object is used when command set to rcp. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..255) | ||
| chasSupervisionRfsCommandsRlsDirName | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5.5 | ||
| The remote directory name where remote file is located in. This is used when command set to rls. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..255) | ||
| chasSupervisionRfsCommandsRlsFileName | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5.6 | ||
| The remote file name where remote file is located in. This is used when command set to rls. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..33) | ||
| chasSupervisionRfsCommandsProcessingState | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5.7 | ||
| command executing state for the previous set operation. | |||
| OBJECT-TYPE | |||
| INTEGER | inProgress(1), ready(2) | ||
| chasSupervisionRfsCommandsStatusCode | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5.8 | ||
| command completetion status error code. | |||
| OBJECT-TYPE | |||
| INTEGER | success(1), slotIsPrimary(2), slotNotExist(3), directoryNotExist(4), fileNotExist(5), maximumFilesExceed(6), noDiskSpace(7), systemBusy(8), systemError(9), directoryNotAllowToRemove(10) | ||
| chasControlReloadStatusTable | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.6 | ||
| Table containing reload status of each network interface slot or stack module | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ChasControlReloadEntry | |||
| chasControlReloadEntry | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.6.1 | ||
| Entry of a network interface reload status | |||
| OBJECT-TYPE | |||
| ChasControlReloadEntry | |||
| chasControlReloadIndex | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.6.1.1 | ||
| Entry of a network interface reload status | |||
| OBJECT-TYPE | |||
| INTEGER | 1..16 | ||
| chasControlReloadStatus | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.6.1.2 | ||
| Returned value indicates if the network interface module is enabled or disabled for reload. | |||
| OBJECT-TYPE | |||
| INTEGER | reloadEnabled(1), reloadDisabled(2), noInterface(3), unknown(4) | ||
| chasGlobalControl | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.7 | ||
| OBJECT IDENTIFIER | |||
| chasGlobalControlDelayedResetAll | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.7.1 | ||
| This object is used to schedule a delayed reset all action. If set to -1 - cancel the timer, 0 - reset all immediately, any other value will start counting down the time until reset. | |||
| OBJECT-TYPE | |||
| INTEGER | -1..65535 | ||
| chasGlobalControlLongCommand | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.7.2 | ||
| This object is used to indicate whether a long-term action is in progress, and if so, what the action is. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), certifySynchro(2), certifyNoSynchro(3), flashSynchro(4), restore(5) | ||
| chasGlobalControlLongCommandStatus | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.7.3 | ||
| This object it indicates the final disposition of the most recent long-term action. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), inProgress(2), completeSuccess(3), completeFailure(4) | ||
| chasSupervisionRfsDfTable | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.8 | ||
| This table contains information about file system size and use. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ChasSupervisionRfsDfEntry | |||
| chasSupervisionRfsDfEntry | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.8.1 | ||
| This entry contains information about file system size and use. | |||
| OBJECT-TYPE | |||
| ChasSupervisionRfsDfEntry | |||
| chasSupervisionRfsDfSlot | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.8.1.1 | ||
| CMM Slot where flash space is evaluated. Slot index 1-16 will return slot 1-16 flash drive information. Slot index 17-32 will return slot 1-16 uflash drive information. | |||
| OBJECT-TYPE | |||
| INTEGER | slot1Flash(1), slot2Flash(2), slot3Flash(3), slot4Flash(4), slot5Flash(5), slot6Flash(6), slot7Flash(7), slot8Flash(8), slot9Flash(9), slot10Flash(10), slot11Flash(11), slot12Flash(12), slot13Flash(13), slot14Flash(14), slot15Flash(15), slot16Flash(16), slot1Uflash(17), slot2Uflash(18), slot3Uflash(19), slot4Uflash(20), slot5Uflash(21), slot6Uflash(22), slot7Uflash(23), slot8Uflash(24), slot9Uflash(25), slot10Uflash(26), slot11Uflash(27), slot12Uflash(28), slot13Uflash(29), slot14Uflash(30), slot15Uflash(31), slot16Uflash(32) | ||
| chasSupervisionRfsDfFlashFree | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.8.1.2 | ||
| Number bytes free on the file system. | |||
| OBJECT-TYPE | |||
| Unsigned32 | |||
| chasSupervisionRfsDfFlashSize | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.8.1.3 | ||
| Number of total bytes on the file system. | |||
| OBJECT-TYPE | |||
| Unsigned32 | |||
| chasSupervisionFlashMemTable | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9 | ||
| This table contains the systems flash memory information. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ChasSupervisionFlashMemEntry | |||
| chasSupervisionFlashMemEntry | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9.1 | ||
| This contains one entry for the flash memory table. | |||
| OBJECT-TYPE | |||
| ChasSupervisionFlashMemEntry | |||
| chasSupervisionSlot | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9.1.1 | ||
| CMM Slot where flash space is evaluated. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..8 | ||
| chasSupervisionFlashSize | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9.1.2 | ||
| Flash memory size. | |||
| OBJECT-TYPE | |||
| Unsigned32 | |||
| chasSupervisionFlashFree | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9.1.3 | ||
| Number bytes free on file system. | |||
| OBJECT-TYPE | |||
| Unsigned32 | |||
| chasSupervisionFlashUsed | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9.1.4 | ||
| A rounded up percentage of Flash Memory used. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..100 | ||
| chasSupervisionCmmCertifiedTable | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.10 | ||
| This table contains... | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| ChasSupervisionCmmCertifiedEntry | |||
| chasSupervisionCmmCertifiedEntry | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.10.1 | ||
| Information about... | |||
| OBJECT-TYPE | |||
| ChasSupervisionCmmCertifiedEntry | |||
| chasSupervisionCmmNum | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.10.1.1 | ||
| CMM Slot where /certified directory is evaluated. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..8 | ||
| chasSupervisionCmmCertifiedStatus | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.10.1.2 | ||
| The status of the CMM certified directory - certified or not. | |||
| OBJECT-TYPE | |||
| INTEGER | notPresent(0), yes(1), no(2) | ||
| alaChasEntPhysFanTable | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.11 | ||
| This table contains one row per physical fan entity. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AlaChasEntPhysFanEntry | |||
| alaChasEntPhysFanEntry | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.11.1 | ||
| Information about a particular fan in a chassis physical entity. | |||
| OBJECT-TYPE | |||
| AlaChasEntPhysFanEntry | |||
| alaChasEntPhysFanLocalIndex | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.11.1.1 | ||
| Index to a chassis fan entity | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| alaChasEntPhysFanStatus | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.11.1.2 | ||
| Chassis fan operational status | |||
| OBJECT-TYPE | |||
| INTEGER | noStatus(0), notRunning(1), running(2) | ||
| alaChasHashMode | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.12 | ||
| When set to brief, Hash mode is enabled. When set to Extended, Hash mode is disabled. | |||
| OBJECT-TYPE | |||
| INTEGER | brief(1), extended(2) | ||
| alaChasUdpTcpPortMode | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.13 | ||
| The control is used to enable or disable UDP TCP port hashing. This option is applicable only when Hash mode is set to disabled (i.e. extended) | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| alaChasNonUCHashControl | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.14 | ||
| This control is used to enable/disable Load balance for non unicast traffic. | |||
| OBJECT-TYPE | |||
| INTEGER | disable(0), enable(1) | ||
| alcatelIND1ChassisMIBConformance | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2 | ||
| Branch For Chassis Supervision Chassis MIB Subsystem Conformance Information. | |||
| OBJECT-IDENTITY | |||
| alcatelIND1ChassisMIBGroups | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1 | ||
| Branch For Chassis Supervision Chassis MIB Subsystem Units Of Conformance. | |||
| OBJECT-IDENTITY | |||
| chasControlModuleGroup | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.1 | ||
| Chassis Supervision Control Modules Group. | |||
| OBJECT-GROUP | |||
| chasControlRedundantGroup | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.2 | ||
| Chassis Supervision Redundant Control Modules Group. | |||
| OBJECT-GROUP | |||
| chasChassisGroup | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.3 | ||
| Chassis Supervision Chassis Group. | |||
| OBJECT-GROUP | |||
| chasControlReloadStatusGroup | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.4 | ||
| Chassis Supervision NI Reload Status Control Modules Group. | |||
| OBJECT-GROUP | |||
| chasGlobalControlGroup | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.5 | ||
| Chassis Supervision Global Control Modules Group. | |||
| OBJECT-GROUP | |||
| chassisNotificationGroup | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.6 | ||
| Chassis Supervision Notification Group. | |||
| NOTIFICATION-GROUP | |||
| alaChasEntPhysFanGroup | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.7 | ||
| Chassis Supervision Physical Fan Group. | |||
| OBJECT-GROUP | |||
| alaChasHashControlGroup | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.8 | ||
| Chassis Supervision Hash Control Group. | |||
| OBJECT-GROUP | |||
| alcatelIND1ChassisMIBCompliances | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.2 | ||
| Branch For Chassis Supervision Chassis MIB Subsystem Compliance Statements. | |||
| OBJECT-IDENTITY | |||
| alcatelIND1ChassisMIBCompliance | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.2.1 | ||
| Compliance statement for Chassis Supervision. | |||
| MODULE-COMPLIANCE | |||
| chassisTrapsDesc | 1.3.6.1.4.1.6486.800.1.3.2.4.1 | ||
| OBJECT IDENTIFIER | |||
| chassisTrapsStr | 1.3.6.1.4.1.6486.800.1.3.2.4.1.0.1 | ||
| A Software Trouble report is sent by whatever application encountering a problem during its execution and would want to aware the user of for maintenance purpose. | |||
| NOTIFICATION-TYPE | |||
| chassisTrapsStrLevel | |||
| chassisTrapsStrAppID | |||
| chassisTrapsStrSnapID | |||
| chassisTrapsStrfileName | |||
| chassisTrapsStrfileLineNb | |||
| chassisTrapsStrErrorNb | |||
| chassisTrapsStrcomments | |||
| chassisTrapsStrdataInfo | |||
| chassisTrapsAlert | 1.3.6.1.4.1.6486.800.1.3.2.4.1.0.2 | ||
| generic trap notifying something changed in the chassis whatever it's a failure or not | |||
| NOTIFICATION-TYPE | |||
| physicalIndex | |||
| chassisTrapsObjectType | |||
| chassisTrapsObjectNumber | |||
| chassisTrapsAlertNumber | |||
| chassisTrapsAlertDescr | |||
| chassisTrapsStateChange | 1.3.6.1.4.1.6486.800.1.3.2.4.1.0.3 | ||
| A status change was detected | |||
| NOTIFICATION-TYPE | |||
| physicalIndex | |||
| chassisTrapsObjectType | |||
| chassisTrapsObjectNumber | |||
| chasEntPhysOperStatus | |||
| chassisTrapsObj | 1.3.6.1.4.1.6486.800.1.3.2.4.2 | ||
| OBJECT IDENTIFIER | |||
| chassisTrapsStrLevel | 1.3.6.1.4.1.6486.800.1.3.2.4.2.1 | ||
| An enumerated value which provides the urgency level of the STR. | |||
| OBJECT-TYPE | |||
| ChassisTrapsStrLevel | |||
| chassisTrapsStrAppID | 1.3.6.1.4.1.6486.800.1.3.2.4.2.2 | ||
| Application Identification number | |||
| OBJECT-TYPE | |||
| ChassisTrapsStrAppID | |||
| chassisTrapsStrSnapID | 1.3.6.1.4.1.6486.800.1.3.2.4.2.3 | ||
| Subapplication Identification number. we can have multiple snapIDs per Subapplication (task) but only one is to be used to send STRs. | |||
| OBJECT-TYPE | |||
| ChassisTrapsStrSnapID | |||
| chassisTrapsStrfileName | 1.3.6.1.4.1.6486.800.1.3.2.4.2.4 | ||
| Name of the source file where the fault was detected. This is given by the C ANSI macro __FILE__. The path shouldn't appear. | |||
| OBJECT-TYPE | |||
| SnmpAdminString | SIZE(0..19) | ||
| chassisTrapsStrfileLineNb | 1.3.6.1.4.1.6486.800.1.3.2.4.2.5 | ||
| Line number in the source file where the fault was detected. This is given by the C ANSI macro __LINE__. | |||
| OBJECT-TYPE | |||
| ChassisTrapsStrfileLineNb | |||
| chassisTrapsStrErrorNb | 1.3.6.1.4.1.6486.800.1.3.2.4.2.6 | ||
| Fault identificator. The error number identify the kind the detected fault and allow a mapping of the data contained in chassisTrapsdataInfo. | |||
| OBJECT-TYPE | |||
| ChassisTrapsStrErrorNb | |||
| chassisTrapsStrcomments | 1.3.6.1.4.1.6486.800.1.3.2.4.2.7 | ||
| comment text explaning the fault. | |||
| OBJECT-TYPE | |||
| SnmpAdminString | SIZE(0..63) | ||
| chassisTrapsStrdataInfo | 1.3.6.1.4.1.6486.800.1.3.2.4.2.8 | ||
| Additional data provided to help to find out the origine of the fault. The contain and the significant portion are varying in accordance with chassisTrapsStrErrorNb. The lenght of this field is expressed in bytes. | |||
| OBJECT-TYPE | |||
| ChassisTrapsStrdataInfo | |||
| chassisTrapsObjectType | 1.3.6.1.4.1.6486.800.1.3.2.4.2.9 | ||
| enumerated value which provide the object type involved in the alert trap. | |||
| OBJECT-TYPE | |||
| ChassisTrapsObjectType | |||
| chassisTrapsObjectNumber | 1.3.6.1.4.1.6486.800.1.3.2.4.2.10 | ||
| number defining the order of the object in the set. EX: number of the considered fan or power supply. This intend to clarify as much as possible the location of the failure or alert. A instance of the appearance of the trap could be: failure on a module. Power supply 3. | |||
| OBJECT-TYPE | |||
| ChassisTrapsObjectNumber | |||
| chassisTrapsAlertNumber | 1.3.6.1.4.1.6486.800.1.3.2.4.2.11 | ||
| this number identify the alert among all the possible chassis alert causes. | |||
| OBJECT-TYPE | |||
| ChassisTrapsAlertNumber | |||
| chassisTrapsAlertDescr | 1.3.6.1.4.1.6486.800.1.3.2.4.2.12 | ||
| description of the alert matching chassisTrapsAlertNumber | |||
| OBJECT-TYPE | |||
| SnmpAdminString | SIZE(0..127) | ||
| physicalIndex | 1.3.6.1.4.1.6486.800.1.3.2.4.2.13 | ||
| The Physical index of the involved object. | |||
| OBJECT-TYPE | |||
| PhysicalIndex | |||
| ChasControlModuleEntry | |||
| SEQUENCE | |||
| INTEGER as chasControlRunningVersion | |||
| INTEGER as chasControlActivateTimeout | |||
| INTEGER as chasControlVersionMngt | |||
| Unsigned32 as chasControlDelayedActivateTimer | |||
| INTEGER as chasControlCertifyStatus | |||
| INTEGER as chasControlSynchronizationStatus | |||
| INTEGER as chasControlAcrossCmmWorkingSynchroStatus | |||
| INTEGER as chasControlAcrossCmmCertifiedSynchroStatus | |||
| ChasControlRedundantEntry | |||
| SEQUENCE | |||
| Counter32 as chasControlNumberOfTakeover | |||
| Unsigned32 as chasControlDelayedRebootTimer | |||
| ChasChassisEntry | |||
| SEQUENCE | |||
| Unsigned32 as chasFreeSlots | |||
| INTEGER as chasPowerLeft | |||
| Counter32 as chasNumberOfResets | |||
| INTEGER as chasHardwareBoardTemp | |||
| INTEGER as chasHardwareCpuTemp | |||
| INTEGER as chasTempRange | |||
| INTEGER as chasTempThreshold | |||
| INTEGER as chasDangerTempThreshold | |||
| INTEGER as chasPrimaryPhysicalIndex | |||
| ChasEntPhysLed | |||
| Textual convention for physical LEDs. Note: Due to European regulation, the LEDs will never be illuminated in red, but will be either green or amber. | |||
| TEXTUAL-CONVENTION | |||
| INTEGER | notApplicable(0), off(1), greenOn(2), greenBlink(3), amberOn(4), amberBlink(5) | ||
| ChasEntPhysPowerType | |||
| Textual convention for type of power supply. | |||
| TEXTUAL-CONVENTION | |||
| INTEGER | notApplicable(0), ac(1), dc(2) | ||
| ChasEntPhysicalEntry | |||
| SEQUENCE | |||
| INTEGER as chasEntPhysAdminStatus | |||
| INTEGER as chasEntPhysOperStatus | |||
| BITS as chasEntPhysLedStatus | |||
| INTEGER as chasEntPhysPower | |||
| SnmpAdminString as chasEntPhysModuleType | |||
| SnmpAdminString as chasEntPhysMfgDate | |||
| SnmpAdminString as chasEntPhysPartNumber | |||
| ChasEntPhysLed as chasEntPhysLedStatusOk1 | |||
| ChasEntPhysLed as chasEntPhysLedStatusOk2 | |||
| ChasEntPhysLed as chasEntPhysLedStatusPrimaryCMM | |||
| ChasEntPhysLed as chasEntPhysLedStatusSecondaryCMM | |||
| ChasEntPhysLed as chasEntPhysLedStatusTemperature | |||
| ChasEntPhysLed as chasEntPhysLedStatusFan | |||
| ChasEntPhysLed as chasEntPhysLedStatusFan1 | |||
| ChasEntPhysLed as chasEntPhysLedStatusFan2 | |||
| ChasEntPhysLed as chasEntPhysLedStatusFan3 | |||
| ChasEntPhysLed as chasEntPhysLedStatusBackupPS | |||
| ChasEntPhysLed as chasEntPhysLedStatusInternalPS | |||
| ChasEntPhysLed as chasEntPhysLedStatusControl | |||
| ChasEntPhysLed as chasEntPhysLedStatusFabric | |||
| ChasEntPhysLed as chasEntPhysLedStatusPSU | |||
| SnmpAdminString as chasEntPhysAsicRev | |||
| SnmpAdminString as chasEntPhysCpldRev | |||
| SnmpAdminString as chasEntPhysDefaultMinibootRev | |||
| SnmpAdminString as chasEntPhysBackUpMinibootRev | |||
| SnmpAdminString as chasEntPhysBootromRev | |||
| INTEGER as chasEntPhysNiNum | |||
| INTEGER as chasEntPhysGbicNum | |||
| INTEGER as chasEntPhysWaveLen | |||
| SnmpAdminString as chasEntPhysUbootRev | |||
| SnmpAdminString as chasEntPhysUbootMinibootRev | |||
| MacAddress as chasEntPhysMacAddress | |||
| SnmpAdminString as chasEntPhysPoeSwVersion | |||
| INTEGER as chasEntPhysC20LFailCont | |||
| SnmpAdminString as chasEntPhysCpuModel | |||
| ChasEntPhysPowerType as chasEntPhysPowerType | |||
| SnmpAdminString as chasEntPhysPowerControlChecksum | |||
| ChasSupervisionRfsLsEntry | |||
| SEQUENCE | |||
| INTEGER as chasSupervisionRfsLsFileIndex | |||
| Unsigned32 as chasSupervisionRfsLsSlot | |||
| DisplayString as chasSupervisionRfsLsDirName | SIZE(0..255) | ||
| DisplayString as chasSupervisionRfsLsFileName | SIZE(0..33) | ||
| INTEGER as chasSupervisionRfsLsFileType | |||
| Unsigned32 as chasSupervisionRfsLsFileSize | |||
| INTEGER as chasSupervisionRfsLsFileAttr | |||
| DisplayString as chasSupervisionRfsLsFileDateTime | SIZE(0..16) | ||
| ChasSupervisionRfsDfEntry | |||
| SEQUENCE | |||
| INTEGER as chasSupervisionRfsDfSlot | |||
| Unsigned32 as chasSupervisionRfsDfFlashFree | |||
| Unsigned32 as chasSupervisionRfsDfFlashSize | |||
| ChasSupervisionFlashMemEntry | |||
| SEQUENCE | |||
| INTEGER as chasSupervisionSlot | |||
| Unsigned32 as chasSupervisionFlashSize | |||
| Unsigned32 as chasSupervisionFlashFree | |||
| INTEGER as chasSupervisionFlashUsed | |||
| ChasSupervisionCmmCertifiedEntry | |||
| SEQUENCE | |||
| INTEGER as chasSupervisionCmmNum | |||
| INTEGER as chasSupervisionCmmCertifiedStatus | |||
| AlaChasEntPhysFanEntry | |||
| SEQUENCE | |||
| INTEGER as alaChasEntPhysFanLocalIndex | |||
| INTEGER as alaChasEntPhysFanStatus | |||
| ChasControlReloadEntry | |||
| SEQUENCE | |||
| INTEGER as chasControlReloadIndex | |||
| INTEGER as chasControlReloadStatus | |||
| ChassisTrapsStrLevel | |||
| enumerated value which provide the urgency level of the STR. | |||
| TEXTUAL-CONVENTION | |||
| INTEGER | strNotFatal(1), strApplicationFatal(2), strFatal(3) | ||
| ChassisTrapsStrAppID | |||
| Application Identification number | |||
| TEXTUAL-CONVENTION | |||
| INTEGER | 0..255 | ||
| ChassisTrapsStrSnapID | |||
| Subapplication Identification number. we can have multiple snapIDs per Subapplication (task) but only one is to be used to send STRs. | |||
| TEXTUAL-CONVENTION | |||
| INTEGER | 0..255 | ||
| ChassisTrapsStrfileLineNb | |||
| Line number in the source file where the fault was detected. This is given by the C ANSI macro __LINE__. | |||
| TEXTUAL-CONVENTION | |||
| INTEGER | 1..65535 | ||
| ChassisTrapsStrErrorNb | |||
| Fault identifier. The error number identifies the kind the detected fault and allows a mapping of the data contained in chassisTrapsdataInfo. | |||
| TEXTUAL-CONVENTION | |||
| INTEGER | 0..65535 | ||
| ChassisTrapsStrdataInfo | |||
| Additional data provided to help to find out the origine of the fault. The contain and the significant portion are varying in accordance with chassisTrapsStrErrorNb. The lenght of this field is expressed in bytes. | |||
| TEXTUAL-CONVENTION | |||
| OCTET STRING | SIZE(0..63) | ||
| ChassisTrapsObjectType | |||
| An enumerated value which provides the object type involved in the alert trap. | |||
| TEXTUAL-CONVENTION | |||
| INTEGER | chassis(1), ni(2), powerSuply(3), fan(4), cmm(5), fabric(6), gbic(7) | ||
| ChassisTrapsObjectNumber | |||
| A number defining the order of the object in the set. EX: The number of the considered fan or power supply. This intend to clarify as much as possible the location of the failure or alert. An instance of the appearance of the trap could be: failure on a module. Power supply 3. | |||
| TEXTUAL-CONVENTION | |||
| INTEGER | 0..255 | ||
| ChassisTrapsAlertNumber | |||
| this number identify the alert among all the possible chassis alert causes. | |||
| TEXTUAL-CONVENTION | |||
| INTEGER | runningWorking(1), runningCertified(2), certifyStarted(3), certifyFlashSyncStarted(4), certifyCompleted(5), certifyFailed(6), synchroStarted(7), synchroCompleted(8), synchroFailed(9), restoreStarted(10), restoreCompleted(11), restoreFailed(12), takeoverStarted(13), takeoverDeferred(14), takeoverCompleted(15), macAllocFailed(16), macRangeFailed(17), fanFailed(18), fanOk(19), fansOk(20), tempOverThreshold(21), tempUnderThreshold(22), tempOverDangerThreshold(23), powerMissing(24), psNotOperational(25), psOperational(26), psAllOperational(27), redundancyNotSupported(28), redundancyDisabledCertifyNeeded(29), cmmStartingAsPrimary(30), cmmStartingAsSecondary(31), cmmStartupCompleted(32), cmmAPlugged(33), cmmBPlugged(34), cmmAUnPlugged(35), cmmBUnPlugged(36), lowNvramBattery(37), notEnoughFabricsOperational(38), simplexNoSynchro(39), secAutoActivate(40), secAutoCertifyStarted(41), secAutoCertifyCompleted(42), secInactiveReset(43), activateScheduled(44), activateStarted(45), getAfileCompleted(46), getAfileFailed(47), sysUpdateStart(48), sysUpdateInProgress(49), sysUpdateError(50), sysUpdateEnd(51), reloadInProgress(52), c20UpgradeOk(53), c20UpgradeFailed(54), c20RestoreOk(55), c20RestoreFailed(56), c20NiFailed(57) | ||