
| SNMPv2-SMI | SNMPv2-CONF | ALCATEL-IND1-BASE |
| SNMPv2-TC | IF-MIB |
| MODULE-IDENTITY | OBJECT-IDENTITY | OBJECT-TYPE |
| Integer32 | Counter64 | OBJECT-GROUP |
| MODULE-COMPLIANCE | softentIND1eService | RowStatus |
| TEXTUAL-CONVENTION | DisplayString | MacAddress |
| InterfaceIndex |
| alcatelIND1EServiceMIB | 1.3.6.1.4.1.6486.800.1.2.1.50.1 | ||
| The parameters for configuration of the E-Service feature. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2006 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE | |||
| MODULE-IDENTITY | |||
| alcatelIND1eServiceMIBObjects | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1 | ||
| Branch For E-Service Managed Objects. | |||
| OBJECT-IDENTITY | |||
| alaEService | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1 | ||
| OBJECT IDENTIFIER | |||
| alaEServiceInfo | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.1 | ||
| OBJECT IDENTIFIER | |||
| alaEServiceMode | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.1.1 | ||
| The current mode configured for Vlan Stacking and Layer 2 tunnel configuration. legacyMode (1) indicates that the commands from AlcatelIND1VLANStacking.mib are to be used. eServiceMode (2) indicates the commands from this MIB are to be used. | |||
| OBJECT-TYPE | |||
| INTEGER | legacyMode(1), eServiceMode(2) | ||
| alaEServiceStatReset | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.1.2 | ||
| Defines the global clear statistics control for ethernet-service counters. default(0) - default value for this object, reset(1) - indicates that all ethernet-service counters should be cleared. | |||
| OBJECT-TYPE | |||
| INTEGER | default(0), reset(1) | ||
| alaEServiceSapProfileTable | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2 | ||
| A table that contains service profiles containing performance and control attributes. An entry in this table is created when a new service profile is defined. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AlaEServiceSapProfileEntry | |||
| alaEServiceSapProfileEntry | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1 | ||
| A E-Service Service Profile entry. | |||
| OBJECT-TYPE | |||
| AlaEServiceSapProfileEntry | |||
| alaEServiceSapProfileID | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.1 | ||
| A label given to uniquely identify this profile. Must be at least one character long. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..31) | ||
| alaEServiceSapProfileCVLANTreatment | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.2 | ||
| The type of VLAN stacking operation to be performed on a customer frame entering this service. Stack Svlan (1) indicates that the SVLAN is to be pre-pended on the frame before any existing 802.1Q tag. Translate (2) means to replace the existing 802.1Q tag with the SVLAN. Change CVLAN (3) indicates that the customer tag is to remain on the frame but its value is to be changed to the supplied value. | |||
| OBJECT-TYPE | |||
| INTEGER | stackSVLAN(1), translate(2), changeCVLAN(3) | ||
| alaEServiceSapProfileReplacementCVLAN | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.3 | ||
| The CVLAN ID to use when using the Change CVLAN treatment mode. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..4094 | ||
| alaEServiceSapProfilePriorityMapMode | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.4 | ||
| This object describes the source of the value for the priority field of the SVLAN 802.1Q tag when pre-pended to the customer data frame. If set to notAssigned(0), SAP priority limit parameter will not be effective, QoS priority settings needs to be configured. mapInnerPtoOuterP (1) uses the priority field of the incoming frame when tagged to fill in the priority field of the SVLAN tag. mapInnerDscpToOuterP (2) uses the frames priority bits in its IP DSCP field to fill in the priority field of the SVLAN tag. FixedP (3) uses the supplied FixedPriorityValue to fill in the SVLAN tag priority bits. | |||
| OBJECT-TYPE | |||
| INTEGER | notAssigned(0), mapInnerPtoOuterP(1), mapInnerDscpToOuterP(2), fixedP(3) | ||
| alaEServiceSapProfileFixedPriority | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.5 | ||
| This object describes the value of the priority field of the 802.1Q SVLAN tag pre-pended to customer data frames when the fixed priority mapping mode is selected. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..7 | ||
| alaEServiceSapProfileIngressBW | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.6 | ||
| This object describes this limit of ingress bandwidth for the traffic to which this profile is applied. If 0, no bandwidth limit is applied. This number represents traffic in units of 1,000,000 bits per second. Note that all CVLAN that belong to this SAP will share this aggregated limit. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| alaEServiceSapProfileBandwidthShare | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.7 | ||
| This object describes the use of the bandwidth limit in how it is applied across multiple ports of the SAP. If set to notApplicable(0), the SAP is not used. If set to Shared (1), all the ports that are part of the SAP will use aggregated bandwidth, sharing some part of the bandwidth limit. If set to notShared (2), each port will use its own bandwidth meter for this SAP. This value is not used if ingressBandwidth is 0. If set to notAssigned(3), SAP bandwidth limit parameter will not be effective, QoS bandwith settings needs to be configured. | |||
| OBJECT-TYPE | |||
| INTEGER | notApplicable(0), shared(1), notShared(2), notAssigned(3) | ||
| alaEServiceSapProfileRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.8 | ||
| The status of this table entry. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| alaEServiceSapProfileEgressBW | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.9 | ||
| This object describes this limit of egress bandwidth for each UNI of the SAP to which this profile is applied. If 0, no bandwidth limit is applied. This number represents traffic in units of Megabits per second. Note that all CVLAN that belong to this SAP will share this aggregated limit. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| alaEServiceSapProfileCIR | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.10 | ||
| Committed Information Rate - bandwidth values in bits per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| alaEServiceSapProfileCBS | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.11 | ||
| Committed Burst Size - bucket size in byte. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| alaEServiceSapProfilePIR | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.12 | ||
| Peak Information Rate - bandwidth values in bits per second. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| alaEServiceSapProfilePBS | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.13 | ||
| Peak Burst Size - bucket size in byte. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| alaEServiceUNIProfileTable | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3 | ||
| A table that contains service profiles containing performance and control attributes. An entry in this table is created when a new service profile is defined. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AlaEServiceUNIProfileEntry | |||
| alaEServiceUNIProfileEntry | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1 | ||
| A E-Service Service Profile entry. | |||
| OBJECT-TYPE | |||
| AlaEServiceUNIProfileEntry | |||
| alaEServiceUNIProfileID | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.1 | ||
| A label given to uniquely identify this profile. Must be at least one character long. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..31) | ||
| alaEServiceUNIProfileStpBpduTreatment | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.2 | ||
| This object describes the behavior of the bridge in regards to the spanning tree protocol BPDU received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. | |||
| OBJECT-TYPE | |||
| AlaEServiceUNIProfileProtocolTreatment | |||
| alaEServiceUNIProfile8021xTreatment | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.3 | ||
| This object describes the behavior of the bridge in regards to the IEEE 802.1x PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. | |||
| OBJECT-TYPE | |||
| AlaEServiceUNIProfileProtocolTreatment | |||
| alaEServiceUNIProfile8021ABTreatment | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.4 | ||
| This object describes the behavior of the bridge in regards to the IEEE 802.1AB PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. | |||
| OBJECT-TYPE | |||
| AlaEServiceUNIProfileProtocolTreatment | |||
| alaEServiceUNIProfile8023adTreatment | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.5 | ||
| This object describes the behavior of the bridge in regards to the IEEE 802.1ad PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. | |||
| OBJECT-TYPE | |||
| AlaEServiceUNIProfileProtocolTreatment | |||
| alaEServiceUNIProfileGvrpTreatment | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.6 | ||
| This object describes the behavior of the bridge in regards to the GVRP PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. | |||
| OBJECT-TYPE | |||
| AlaEServiceUNIProfileProtocolTreatment | |||
| alaEServiceUNIProfileAmapTreatment | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.7 | ||
| This object describes the behavior of the bridge in regards to the Alcatel propietary AMAP PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. Currenly mac-tunnel is not supported | |||
| OBJECT-TYPE | |||
| AlaEServiceUNIProfileProtocolTreatment | |||
| alaEServiceUNIProfileRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.8 | ||
| The status of this table entry. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| alaEServiceUNIProfileMvrpTreatment | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.9 | ||
| This object describes the behavior of the bridge in regards to the MVRP PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol. Currently peer is not supported for MVRP | |||
| OBJECT-TYPE | |||
| AlaEServiceUNIProfileProtocolTreatment | |||
| alaEServiceUNIProfileTunnelMac | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.10 | ||
| This object specifies the tunnel mac used to tunnel L2 protocol to NNI ports | |||
| OBJECT-TYPE | |||
| MacAddress | |||
| alaEServiceUNIProfileLacpMarkerTreatment | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.11 | ||
| This object describes the behavior of the bridge in regards to the LACP MARKER PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. | |||
| OBJECT-TYPE | |||
| AlaEServiceUNIProfileProtocolTreatment | |||
| alaEServiceUNIProfileOamTreatment | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.12 | ||
| This object describes the behavior of the bridge in regards to the OAM PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. | |||
| OBJECT-TYPE | |||
| AlaEServiceUNIProfileProtocolTreatment | |||
| alaEServiceUNIProfileCiscoPagpTreatment | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.13 | ||
| This object describes the behavior of the bridge in regards to the PAGP PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. Currently peer is not supported | |||
| OBJECT-TYPE | |||
| AlaEServiceUNIProfileProtocolTreatment | |||
| alaEServiceUNIProfileCiscoUdldTreatment | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.14 | ||
| This object describes the behavior of the bridge in regards to the UDLD PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. | |||
| OBJECT-TYPE | |||
| AlaEServiceUNIProfileProtocolTreatment | |||
| alaEServiceUNIProfileCiscoCdpTreatment | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.15 | ||
| This object describes the behavior of the bridge in regards to the CDC PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. Currently peer is not supported | |||
| OBJECT-TYPE | |||
| AlaEServiceUNIProfileProtocolTreatment | |||
| alaEServiceUNIProfileCiscoVtpTreatment | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.16 | ||
| This object describes the behavior of the bridge in regards to the VTP PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. Currently peer is not supported | |||
| OBJECT-TYPE | |||
| AlaEServiceUNIProfileProtocolTreatment | |||
| alaEServiceUNIProfileCiscoDtpTreatment | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.17 | ||
| This object describes the behavior of the bridge in regards to the DTP PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. Currently peer not supported | |||
| OBJECT-TYPE | |||
| AlaEServiceUNIProfileProtocolTreatment | |||
| alaEServiceUNIProfileCiscoPvstTreatment | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.18 | ||
| This object describes the behavior of the bridge in regards to the PVST PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. Currently peer not supported | |||
| OBJECT-TYPE | |||
| AlaEServiceUNIProfileProtocolTreatment | |||
| alaEServiceUNIProfileCiscoVlanTreatment | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.19 | ||
| This object describes the behavior of the bridge in regards to the VLAN PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. Currently peer not supported | |||
| OBJECT-TYPE | |||
| AlaEServiceUNIProfileProtocolTreatment | |||
| alaEServiceUNIProfileCiscoUplinkTreatment | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.20 | ||
| This object describes the behavior of the bridge in regards to the UPLINK PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol. Mac-Tunnel(4) enables mac-tunnelling. Currently peer not supported. | |||
| OBJECT-TYPE | |||
| AlaEServiceUNIProfileProtocolTreatment | |||
| alaEServiceTable | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4 | ||
| A table that contains the services and their assigned SVLAN for the E-Service feature. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AlaEServiceEntry | |||
| alaEServiceEntry | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4.1 | ||
| The svlan/ipmvlan-port association. | |||
| OBJECT-TYPE | |||
| AlaEServiceEntry | |||
| alaEServiceID | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4.1.1 | ||
| A label given to uniquely identify this Service. Must be at least one character long. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..32) | ||
| alaEServiceSVLAN | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4.1.2 | ||
| The SVLAN number of the SVLAN chosen to the be transport for this service. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..4094 | ||
| alaEServiceVlanType | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4.1.3 | ||
| The type of the vlan this service is going to attach to. When creating the service, the type should match the vlanId specified in the request. | |||
| OBJECT-TYPE | |||
| INTEGER | unknown(0), svlan(1), ipmvlan(2) | ||
| alaEServiceRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4.1.4 | ||
| The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove a service. When creating or deleting the service, the user needs to provide both the svlan and the vlantype objects. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| alaEServiceStatGreenCount | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4.1.5 | ||
| Counter for the number of packets/bytes being Green compliant (i.e. in case of srTCM and trTCM, packet is CIR/CBS compliant). | |||
| OBJECT-TYPE | |||
| Counter64 | |||
| alaEServiceStatYellowCount | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4.1.6 | ||
| Counter for the number of packets/bytes being Yellow compliant (i.e. in case of srTCM and trTCM, packet is PIR/PBS compliant). | |||
| OBJECT-TYPE | |||
| Counter64 | |||
| alaEServiceStatRedCount | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4.1.7 | ||
| Counter for the number of packets/bytes being Red compliant (i.e. in case of srTCM and trTCM, packet is neither CIR/CBS nor PIR/PBS compliant). | |||
| OBJECT-TYPE | |||
| Counter64 | |||
| alaEServiceSapTable | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.5 | ||
| A table that contains the Service Access Points (Sap) listed by ID. This table is used to create, delete, and modify the SAP's profile | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AlaEServiceSapEntry | |||
| alaEServiceSapEntry | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.5.1 | ||
| The list of SAP. | |||
| OBJECT-TYPE | |||
| AlaEServiceSapEntry | |||
| alaEServiceSapID | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.5.1.1 | ||
| A Number given to uniquely identify the SAP. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| alaEServiceSapServiceID | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.5.1.2 | ||
| A label given to uniquely identify the Service this SAP is for. Must be at least one character long. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..32) | ||
| alaEServiceSapProfile | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.5.1.3 | ||
| The string identifying the SAP Profile this sap is to use. If specified, must match an existing SAP Profile. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..32) | ||
| alaEServiceSapRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.5.1.4 | ||
| The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove a sap. When creating the sap, the user needs to provide the service name in the same set request. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| alaEServiceSapCvlanTable | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.6 | ||
| A table that contains the Service Access Points (Sap) where the CVLANs are bound to their service. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AlaEServiceSapCvlanEntry | |||
| alaEServiceSapCvlanEntry | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.6.1 | ||
| The CVLAN to Sap binding. | |||
| OBJECT-TYPE | |||
| AlaEServiceSapCvlanEntry | |||
| alaEServiceSapCvlanSapID | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.6.1.1 | ||
| A Number given to uniquely identify this SAP. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| alaEServiceSapCvlanCvlan | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.6.1.2 | ||
| This object is the CVLAN ID that this binding is targeted at. The CVLAN ID may be 0, which indicates an all or untagged only mapping type. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4094 | ||
| alaEServiceSapCvlanMapType | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.6.1.3 | ||
| This object is the mapping type that defines what CVLANs are mapped into this service. Multiple mappings can be defined for CVLAN to service, however only one all (2) or untaggedOnly (3) mapping entry can be created per UNI. A mapping type of Single (1) denotes a specific CVLAN value to bind to the service. A mapping type of All (2) denotes that all customer frames that do not map to any other SAP, will be mapped into this service. A mapping type of Untagged (3) denotes that only the untagged frames will be mapped into this service. | |||
| OBJECT-TYPE | |||
| INTEGER | single(1), all(2), untaggedOnly(3) | ||
| alaEServiceSapCvlanRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.6.1.4 | ||
| The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove a SAP. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| alaEServicePortTable | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7 | ||
| A table that contains the ports used by the EService feature. Both UNI and NNI are listed here. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AlaEServicePortEntry | |||
| alaEServicePortEntry | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7.1 | ||
| The list of ports being used by EService. | |||
| OBJECT-TYPE | |||
| AlaEServicePortEntry | |||
| alaEServicePortID | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7.1.1 | ||
| The IfIndex of this UNI or NNI Port. | |||
| OBJECT-TYPE | |||
| InterfaceIndex | |||
| alaEServicePortType | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7.1.2 | ||
| The type of port for Vlan Stacking operation. uni (1) represents a customer facing port on which traffic may enter the E-Service. nni (2) respresents a provider network port over which the E-Service may be connected. | |||
| OBJECT-TYPE | |||
| INTEGER | uni(1), nni(3) | ||
| alaEServicePortVendorTpid | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7.1.3 | ||
| he TPID for this port if type is NNI. It is used for the incoming data traffic parsing and it is substituted to the 802.1Q standard Tpid for the outgoing data traffic. This is used for compatibility with other vendor equipment. The default value is the standard value 0x8100. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| alaEServicePortLegacyStpBpdu | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7.1.4 | ||
| The legacy STP BPDU treatment for this port if NNI. It defines the type of processing applied to STP legacy BPDUs on network ports. Legacy BPDU refer to conventional/customer BPDUs with MAC address 01:80:c2:00:00:00 and its processing on network ports can be enabled/disabled by this object.By default the value is disabled i.e provider MAC BPDU with MAC address 01:80:c2:00:00:08 would be processed at network ports. | |||
| OBJECT-TYPE | |||
| INTEGER | notApplicable(0), enable(1), disable(2) | ||
| alaEServicePortLegacyGvrpPdu | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7.1.5 | ||
| The legacy GVRP PDU treatment for this port if NNI. It defines the type of processing applied to GVRP PDUs on network ports. | |||
| OBJECT-TYPE | |||
| INTEGER | notApplicable(0), enable(1), disable(2) | ||
| alaEServicePortUniProfile | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7.1.6 | ||
| The label of an existing UNI profile that which contains various properties to be applied to this port if UNI. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..31) | ||
| alaEServicePortTransBridging | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7.1.7 | ||
| The Transparent Bridging status for the nni Port. | |||
| OBJECT-TYPE | |||
| INTEGER | enable(1), disable(2) | ||
| alaEServicePortLegacyMvrpPdu | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7.1.8 | ||
| The legacy MVRP PDU treatment for this port if NNI. It defines the type of processing applied to MVRP PDUs on network ports. | |||
| OBJECT-TYPE | |||
| INTEGER | notApplicable(0), enable(1), disable(2) | ||
| alaEServiceSapUniTable | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.8 | ||
| A table that contains the UNI that are bound to each SAP for classifying traffic into each EService. Not that writing to this table may create a new UNI. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AlaEServiceSapUniEntry | |||
| alaEServiceSapUniEntry | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.8.1 | ||
| The list of SAP-UNI bindings being used by EService. | |||
| OBJECT-TYPE | |||
| AlaEServiceSapUniEntry | |||
| alaEServiceSapUniSap | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.8.1.1 | ||
| The SAP ID that is configured onto this port. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| alaEServiceSapUniUni | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.8.1.2 | ||
| The IfIndex of this UNI Port. | |||
| OBJECT-TYPE | |||
| InterfaceIndex | |||
| alaEServiceSapUniRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.8.1.3 | ||
| The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove a binding | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| alaEServiceNniSvlanTable | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.9 | ||
| A table that contains the SVLANs bound to each NNI for use by the EService feature. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AlaEServiceNniSvlanEntry | |||
| alaEServiceNniSvlanEntry | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.9.1 | ||
| The list of NNI-SVLAN bindings being used by EService. | |||
| OBJECT-TYPE | |||
| AlaEServiceNniSvlanEntry | |||
| alaEServiceNniSvlanNni | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.9.1.1 | ||
| The IfIndex of this NNI Port. | |||
| OBJECT-TYPE | |||
| InterfaceIndex | |||
| alaEServiceNniSvlanSvlan | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.9.1.2 | ||
| The SVLAN bound to this port. SVLAN cannot be 1. | |||
| OBJECT-TYPE | |||
| INTEGER | 2..4094 | ||
| alaEServiceNniSvlanRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.9.1.3 | ||
| The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove a binding | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| alaEServiceNniSvlanVpaType | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.9.1.4 | ||
| The object is used to specify whether the VPA state is to be controlled by an ERP or a STP. By default VPA state is controlled by STP. | |||
| OBJECT-TYPE | |||
| INTEGER | stp(1), erp(2) | ||
| alaEServiceSapCvlanPortStatTable | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.10 | ||
| A statistics table that contains the counters per SAP. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AlaEServiceSapCvlanPortStatEntry | |||
| alaEServiceSapCvlanPortStatEntry | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.10.1 | ||
| A E-Service Statistics Entry. | |||
| OBJECT-TYPE | |||
| AlaEServiceSapCvlanPortStatEntry | |||
| alaEServiceSapCvlanPortStatSapID | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.10.1.1 | ||
| A Number given to uniquely identify the SAP. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| alaEServiceSapCvlanPortStatCvlanID | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.10.1.2 | ||
| This object is the CVLAN ID that this binding is targeted at. The CVLAN ID may be 0, which indicates an all or untagged only mapping type. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4094 | ||
| alaEServiceSapCvlanPortStatPortID | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.10.1.3 | ||
| The IfIndex of this UNI Port. | |||
| OBJECT-TYPE | |||
| InterfaceIndex | |||
| alaEServiceSapCvlanPortStatGreenCount | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.10.1.4 | ||
| Counter for the number of packets/bytes being Green compliant (i.e. in case of srTCM and trTCM, packet is CIR/CBS compliant) per UNI port, per CVLAN. This object is applicable only when ingress bandwidth is not shared across SAP ports and CVLANs. | |||
| OBJECT-TYPE | |||
| Counter64 | |||
| alaEServiceSapCvlanPortStatYellowCount | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.10.1.5 | ||
| Counter for the number of packets/bytes being Yellow compliant (i.e. in case of srTCM and trTCM, packet is PIR/PBS compliant) per UNI port, per CVLAN. This object is applicable only when ingress bandwidth is not shared across SAP ports and CVLANs. | |||
| OBJECT-TYPE | |||
| Counter64 | |||
| alaEServiceSapCvlanPortStatRedCount | 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.10.1.6 | ||
| Counter for the number of packets/bytes being Red compliant (i.e. in case of srTCM and trTCM, packet is neither CIR/CBS nor PIR/PBS compliant) per UNI port, per CVLAN. This object is applicable only when ingress bandwidth is not shared across SAP ports and CVLANs. | |||
| OBJECT-TYPE | |||
| Counter64 | |||
| alcatelIND1EServiceMIBConformance | 1.3.6.1.4.1.6486.800.1.2.1.50.1.2 | ||
| Branch For E-Service Conformance Information. | |||
| OBJECT-IDENTITY | |||
| alcatelIND1EServiceMIBGroups | 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1 | ||
| Branch For E-Service Units Of Conformance. | |||
| OBJECT-IDENTITY | |||
| alaEServiceSapProfileGroup | 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.1 | ||
| Collection of objects for management of E-Service Sap Profiles. | |||
| OBJECT-GROUP | |||
| alaEServiceUNIProfileGroup | 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.2 | ||
| Collection of objects for management of EService UNI Profiles. | |||
| OBJECT-GROUP | |||
| alaEServiceGroup | 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.3 | ||
| Collection of objects for management of E-Services. | |||
| OBJECT-GROUP | |||
| alaEServiceSapGroup | 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.4 | ||
| Collection of objects for management of E-Service SAPs. | |||
| OBJECT-GROUP | |||
| alaEServiceSapCvlanGroup | 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.5 | ||
| Collection of objects for management of E-Service SAP CVLAN bindings. | |||
| OBJECT-GROUP | |||
| alaEServicePortGroup | 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.6 | ||
| Collection of objects for management of E-Service Ports. | |||
| OBJECT-GROUP | |||
| alaEServiceSapUniGroup | 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.7 | ||
| Collection of objects for management of E-Service SAP to UNI Binding. | |||
| OBJECT-GROUP | |||
| alaEServiceNniSvlanGroup | 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.8 | ||
| Collection of objects for management of E-Service SVLAN to NNI Binding. | |||
| OBJECT-GROUP | |||
| alaEServiceSapCvlanPortStatGroup | 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.9 | ||
| Collection of objects for srTCM and trTCM Counters. | |||
| OBJECT-GROUP | |||
| alaEServiceInfoGroup | 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.10 | ||
| Collection of E-Service Global Objects. | |||
| OBJECT-GROUP | |||
| alcatelIND1EServiceMIBCompliances | 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.2 | ||
| Branch For E-Service Compliance Statements. | |||
| OBJECT-IDENTITY | |||
| alcatelIND1EServiceMIBCompliance | 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.2.1 | ||
| Compliance statement for E-Service. | |||
| MODULE-COMPLIANCE | |||
| AlaEServiceUNIProfileProtocolTreatment | |||
| The behavior of the bridge in regards to the given protocols packets received on the UNI. Tunnel (1) enables the packets to be tunneled across the provider network. Discard (2) causes the packets to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. | |||
| TEXTUAL-CONVENTION | |||
| INTEGER | tunnel(1), drop(2), peer(3), macTunnel(4) | ||
| AlaEServiceSapProfileEntry | |||
| SEQUENCE | |||
| DisplayString as alaEServiceSapProfileID | |||
| INTEGER as alaEServiceSapProfileCVLANTreatment | |||
| INTEGER as alaEServiceSapProfileReplacementCVLAN | |||
| INTEGER as alaEServiceSapProfilePriorityMapMode | |||
| INTEGER as alaEServiceSapProfileFixedPriority | |||
| Integer32 as alaEServiceSapProfileIngressBW | |||
| INTEGER as alaEServiceSapProfileBandwidthShare | |||
| RowStatus as alaEServiceSapProfileRowStatus | |||
| Integer32 as alaEServiceSapProfileEgressBW | |||
| Integer32 as alaEServiceSapProfileCIR | |||
| Integer32 as alaEServiceSapProfileCBS | |||
| Integer32 as alaEServiceSapProfilePIR | |||
| Integer32 as alaEServiceSapProfilePBS | |||
| AlaEServiceUNIProfileEntry | |||
| SEQUENCE | |||
| DisplayString as alaEServiceUNIProfileID | |||
| AlaEServiceUNIProfileProtocolTreatment as alaEServiceUNIProfileStpBpduTreatment | |||
| AlaEServiceUNIProfileProtocolTreatment as alaEServiceUNIProfile8021xTreatment | |||
| AlaEServiceUNIProfileProtocolTreatment as alaEServiceUNIProfile8021ABTreatment | |||
| AlaEServiceUNIProfileProtocolTreatment as alaEServiceUNIProfile8023adTreatment | |||
| AlaEServiceUNIProfileProtocolTreatment as alaEServiceUNIProfileGvrpTreatment | |||
| AlaEServiceUNIProfileProtocolTreatment as alaEServiceUNIProfileAmapTreatment | |||
| RowStatus as alaEServiceUNIProfileRowStatus | |||
| AlaEServiceUNIProfileProtocolTreatment as alaEServiceUNIProfileMvrpTreatment | |||
| MacAddress as alaEServiceUNIProfileTunnelMac | |||
| AlaEServiceUNIProfileProtocolTreatment as alaEServiceUNIProfileLacpMarkerTreatment | |||
| AlaEServiceUNIProfileProtocolTreatment as alaEServiceUNIProfileOamTreatment | |||
| AlaEServiceUNIProfileProtocolTreatment as alaEServiceUNIProfileCiscoPagpTreatment | |||
| AlaEServiceUNIProfileProtocolTreatment as alaEServiceUNIProfileCiscoUdldTreatment | |||
| AlaEServiceUNIProfileProtocolTreatment as alaEServiceUNIProfileCiscoCdpTreatment | |||
| AlaEServiceUNIProfileProtocolTreatment as alaEServiceUNIProfileCiscoVtpTreatment | |||
| AlaEServiceUNIProfileProtocolTreatment as alaEServiceUNIProfileCiscoDtpTreatment | |||
| AlaEServiceUNIProfileProtocolTreatment as alaEServiceUNIProfileCiscoPvstTreatment | |||
| AlaEServiceUNIProfileProtocolTreatment as alaEServiceUNIProfileCiscoVlanTreatment | |||
| AlaEServiceUNIProfileProtocolTreatment as alaEServiceUNIProfileCiscoUplinkTreatment | |||
| AlaEServiceEntry | |||
| SEQUENCE | |||
| DisplayString as alaEServiceID | |||
| INTEGER as alaEServiceSVLAN | |||
| INTEGER as alaEServiceVlanType | |||
| RowStatus as alaEServiceRowStatus | |||
| Counter64 as alaEServiceStatGreenCount | |||
| Counter64 as alaEServiceStatYellowCount | |||
| Counter64 as alaEServiceStatRedCount | |||
| AlaEServiceSapEntry | |||
| SEQUENCE | |||
| Integer32 as alaEServiceSapID | |||
| DisplayString as alaEServiceSapServiceID | |||
| DisplayString as alaEServiceSapProfile | |||
| RowStatus as alaEServiceSapRowStatus | |||
| AlaEServiceSapCvlanEntry | |||
| SEQUENCE | |||
| Integer32 as alaEServiceSapCvlanSapID | |||
| INTEGER as alaEServiceSapCvlanCvlan | |||
| INTEGER as alaEServiceSapCvlanMapType | |||
| RowStatus as alaEServiceSapCvlanRowStatus | |||
| AlaEServicePortEntry | |||
| SEQUENCE | |||
| InterfaceIndex as alaEServicePortID | |||
| INTEGER as alaEServicePortType | |||
| Integer32 as alaEServicePortVendorTpid | |||
| INTEGER as alaEServicePortLegacyStpBpdu | |||
| INTEGER as alaEServicePortLegacyGvrpPdu | |||
| DisplayString as alaEServicePortUniProfile | |||
| INTEGER as alaEServicePortTransBridging | |||
| INTEGER as alaEServicePortLegacyMvrpPdu | |||
| AlaEServiceSapUniEntry | |||
| SEQUENCE | |||
| Integer32 as alaEServiceSapUniSap | |||
| InterfaceIndex as alaEServiceSapUniUni | |||
| RowStatus as alaEServiceSapUniRowStatus | |||
| AlaEServiceNniSvlanEntry | |||
| SEQUENCE | |||
| InterfaceIndex as alaEServiceNniSvlanNni | |||
| INTEGER as alaEServiceNniSvlanSvlan | |||
| RowStatus as alaEServiceNniSvlanRowStatus | |||
| INTEGER as alaEServiceNniSvlanVpaType | |||
| AlaEServiceSapCvlanPortStatEntry | |||
| SEQUENCE | |||
| Integer32 as alaEServiceSapCvlanPortStatSapID | |||
| INTEGER as alaEServiceSapCvlanPortStatCvlanID | |||
| InterfaceIndex as alaEServiceSapCvlanPortStatPortID | |||
| Counter64 as alaEServiceSapCvlanPortStatGreenCount | |||
| Counter64 as alaEServiceSapCvlanPortStatYellowCount | |||
| Counter64 as alaEServiceSapCvlanPortStatRedCount | |||