ALCATEL-IND1-LAG-MIB

File: ALCATEL-IND1-LAG-MIB.mib (63933 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
IF-MIB Q-BRIDGE-MIB IEEE8023-LAG-MIB
ALCATEL-IND1-BASE

Imported symbols

MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE
Integer32 Counter32 TimeTicks
DisplayString MacAddress TEXTUAL-CONVENTION
RowStatus NOTIFICATION-TYPE NOTIFICATION-GROUP
MODULE-COMPLIANCE OBJECT-GROUP InterfaceIndex
PortList LacpKey LacpState
ChurnState lnkaggTraps softentIND1LnkAgg

Defined Objects

alcatelIND1LAGMIB 1.3.6.1.4.1.6486.800.1.2.1.13.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): The Link Aggregation module for managing ALCATEL FALCON product This MIB is an image of the 802.3ad standard. The aim of this proprietary MIB is to allow the creation of aggregate objects with their size. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
MODULE-IDENTITY    

alcatelIND1LAGMIBObjects 1.3.6.1.4.1.6486.800.1.2.1.13.1.1
OBJECT IDENTIFIER    

alclnkaggAgg 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1
OBJECT IDENTIFIER    

alclnkaggAggTable 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1
A table that contains information about every Aggregator that is associated with this System. To create specify alclnkaggAggIndex,alclnkaggAggSize and alclnkaggAggLacpType.
OBJECT-TYPE    
  SEQUENCE OF  
    AlclnkaggAggEntry

alclnkaggAggEntry 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1
A list of the Aggregator parameters. This is indexed by the ifIndex of the Aggregator.
OBJECT-TYPE    
  AlclnkaggAggEntry  

alclnkaggAggIndex 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.1
The unique identifier allocated to this Aggregator by the local System. This attribute identifies an Aggregator instance among the subordinate managed objects of the containing object. This value is read-only.
OBJECT-TYPE    
  InterfaceIndex  

alclnkaggAggMACAddress 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.2
A 6-octet read-only value carrying the individual MAC address assigned to the Aggregator.
OBJECT-TYPE    
  MacAddress  

alclnkaggAggActorSystemPriority 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.3
A 2-octet read-create value indicating the priority value associated with the Actor's System ID.
OBJECT-TYPE    
  INTEGER 0..65535  

alclnkaggAggActorSystemID 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.4
A 6-octet read-create MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause , only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed. objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see ).
OBJECT-TYPE    
  MacAddress  

alclnkaggAggPartnerAdminKey 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.5
The current Administrative value of the Key accepted for the Aggregator's current protocol Partner. Optional this is a 16-bit read-create value. If the aggregation is manually configured, this Key value will be a value assigned by the local System. The administrative Key value may differ from the operational
OBJECT-TYPE    
  LacpKey  

alclnkaggAggActorAdminKey 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.6
The current administrative value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in . This is a 16-bit, read-create value. The meaning of particular Key values is of local significance.
OBJECT-TYPE    
  LacpKey  

alclnkaggAggActorOperKey 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.7
The current operational value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in . This is a 16-bit read-only value. The meaning of particular Key values is of local significance.
OBJECT-TYPE    
  LacpKey  

alclnkaggAggPartnerSystemID 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.8
A 6-octet read-create MAC address value consisting of the unique identifier for the current protocol Partner of this Aggregator. A value of zero indicates that there is no known Partner. If the aggregation is manually configured, this System ID value will be a value assigned by the local System.
OBJECT-TYPE    
  MacAddress  

alclnkaggAggPartnerSystemPriority 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.9
A 2-octet read-create value that indicates the priority value associated with the Partner's System ID. If the aggregation is manually configured, this System Priority value will be a value assigned by the local System.
OBJECT-TYPE    
  INTEGER 0..65535  

alclnkaggAggPartnerOperKey 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.10
The current operational value of the Key for the Aggregator's current protocol Partner. This is a 16-bit read-create value. If the aggregation is manually configured, this Key value will be a value assigned by the local System.
OBJECT-TYPE    
  LacpKey  

alclnkaggAggSize 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.11
Maximum number of links that could be attached to this aggregator, This nominator is mandatory and is a required field in order to create a row in this table
OBJECT-TYPE    
  INTEGER 1..16  

alclnkaggAggNumber 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.12
Aggreagtor number reference the aggregate dedicated from the ifindex at the creation
OBJECT-TYPE    
  INTEGER 0..127  

alclnkaggAggDescr 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.13
Description is a human readable string which describes of the type of aggregator object OMNICHANNEL / LACP etc …
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

alclnkaggAggName 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.14
Name of the aggregator is human readable string manually given by the operator
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

alclnkaggAggLacpType 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.15
Aggreagtor set with LACP protocol or not (case of Omnichannel) mandatory at the creation of the aggregator, cannot be modified later
OBJECT-TYPE    
  LacpType  

alclnkaggAggAdminState 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.16
status assigned by the admnistrator. The activation of the aggregator is managed by this nominator
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alclnkaggAggOperState 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.17
Operational status of the aggregator with proprietary values operational state from iftable corresponds to UP state
OBJECT-TYPE    
  INTEGER up(1), down(2), logicPortCreatFailed(3), qReservationFailed(4)  

alclnkaggAggNbrSelectedPorts 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.18
The number of ports selected at the momemt .
OBJECT-TYPE    
  INTEGER 0..16  

alclnkaggAggNbrAttachedPorts 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.19
The number of ports attached at the momemt .
OBJECT-TYPE    
  INTEGER 0..16  

alclnkaggAggPrimaryPortIndex 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.20
the ifindex of the primary port in the aggregator used to send BPDUs and flooding frames Zeo indicates no primary port is available .
OBJECT-TYPE    
  InterfaceIndex  

alclnkaggAggPrimaryPortPosition 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.21
the port index number in the aggregator used to send BPDUs and flooding frames .
OBJECT-TYPE    
  INTEGER -1..15  

alclnkaggAggRowStatus 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.22
This object is the RowStatus (locking flag) for creating or deleting aggregator objects. alclnkaggAggSize, alclnkaggAggLacpType and must be supplied in the request to create a row, it is a required field.
OBJECT-TYPE    
  RowStatus  

alclnkaggAggPreemptState 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.23
This sets the pre-emption state for an aggregate. The default value is disable.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alclnkaggAggPreemptValue 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.24
This sets the pre-empt timer value in seconds for an aggregate. The default value is 30 seconds.
OBJECT-TYPE    
  Integer32 30..300  

alclnkaggAggPortListTable 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.2
A table that contains a list of all the ports associated with each Aggregator.
OBJECT-TYPE    
  SEQUENCE OF  
    AlclnkaggAggPortListEntry

alclnkaggAggPortListEntry 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.2.1
A list of the ports associated with a given Aggregator. This is indexed by the ifIndex of the Aggregator.
OBJECT-TYPE    
  AlclnkaggAggPortListEntry  

alclnkaggAggPortListPorts 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.2.1.1
The complete set of ports currently associated with this Aggregator. Each bit set in this list represents an Actor Port member of this Link Aggregation.
OBJECT-TYPE    
  PortList  

alclnkaggAggEniActivate 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.3
This variable activates or deactivates link aggregation for ENI
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alclnkaggSlotTable 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.4
Each row in this table represents the link aggregation status for the associated slot.
OBJECT-TYPE    
  SEQUENCE OF  
    AlclnkaggSlotEntry

alclnkaggSlotEntry 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.4.1
Configuration parameters for link aggregation.
OBJECT-TYPE    
  AlclnkaggSlotEntry  

alclnkaggSlotNum 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.4.1.1
The slot number.
OBJECT-TYPE    
  INTEGER 1..16  

alclnkaggSlotStatus 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.4.1.2
Link aggregation enable/disable
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alclnkaggMultipleAggPerSlot 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.4.1.3
Enable/disable multiple Link aggregation per slot
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alclnkaggAggIdIfIndexTable 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.5
Each row in this table represents the link aggregation aggregate id's corresponding ifIndex.
OBJECT-TYPE    
  SEQUENCE OF  
    AlclnkaggAggIdIfIndexEntry

alclnkaggAggIdIfIndexEntry 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.5.1
Parameters for link aggregation aggregate id relationship to ifIndex.
OBJECT-TYPE    
  AlclnkaggAggIdIfIndexEntry  

alclnkaggIfIndex 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.5.1.1
IfIndex for the given Aggregate ID
OBJECT-TYPE    
  INTEGER 1..2147483647  

alclnkaggAggId 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.5.1.2
The aggregate id number.
OBJECT-TYPE    
  INTEGER 0..127  

alclnkaggAggPort 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2
OBJECT IDENTIFIER    

alclnkaggAggPortTable 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1
A table that contains Link Aggregation Control configuration information about every Aggregation Port associated with this device. A row appears in this table for each physical port.
OBJECT-TYPE    
  SEQUENCE OF  
    AlclnkaggAggPortEntry

alclnkaggAggPortEntry 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1
A list of Link Aggregation Control configuration parameters for each Aggregation Port on this device.
OBJECT-TYPE    
  AlclnkaggAggPortEntry  

alclnkaggAggPortIndex 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.1
The ifIndex of the port
OBJECT-TYPE    
  InterfaceIndex  

alclnkaggAggPortActorSystemPriority 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.2
A 2-octet read-create value used to define the priority value associated with the Actor's System ID.
OBJECT-TYPE    
  INTEGER 0..255  

alclnkaggAggPortActorSystemID 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.3
A 6-octet read-create MAC address value that defines the value of the System ID for the System that contains this Aggregation Port.
OBJECT-TYPE    
  MacAddress  

alclnkaggAggPortActorAdminKey 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.4
The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-create value. The meaning of particular Key values is of local significance.
OBJECT-TYPE    
  LacpKey  

alclnkaggAggPortActorOperKey 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.5
The current operational value of the Key for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local significance.
OBJECT-TYPE    
  LacpKey  

alclnkaggAggPortPartnerAdminSystemPriority 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.6
A 2-octet read-create value used to define the administrative value of priority associated with the Partner's System ID. The assigned value is used, along with the value of aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
OBJECT-TYPE    
  INTEGER 0..255  

alclnkaggAggPortPartnerOperSystemPriority 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.7
A 2-octet read-only value indicating the operational value of priority associated with the Partner's System ID. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminSystemPriority if there is no protocol Partner.
OBJECT-TYPE    
  INTEGER 0..255  

alclnkaggAggPortPartnerAdminSystemID 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.8
A 6-octet read-create MACAddress value representing the administrative value of the Aggregation Port's protocol Partner's System ID. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
OBJECT-TYPE    
  MacAddress  

alclnkaggAggPortPartnerOperSystemID 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.9
A 6-octet read-only MACAddress value representing the current value of the Aggregation Port's protocol Partner's System ID. A value of zero indicates that there is no known protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminSystemID if there is no protocol Partner.
OBJECT-TYPE    
  MacAddress  

alclnkaggAggPortPartnerAdminKey 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.10
The current administrative value of the Key for the protocol Partner. This is a 16-bit read-create value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
OBJECT-TYPE    
  LacpKey  

alclnkaggAggPortPartnerOperKey 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.11
The current operational value of the Key for the protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminKey if there is no protocol Partner. This is a 16-bit read-only value.
OBJECT-TYPE    
  LacpKey  

alclnkaggAggPortSelectedAggID 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.12
The identifier value of the Aggregator that this Aggregation Port has currently selected. Zero indicates that the Aggregation Port has not selected an Aggregator, either because it is in the process of detaching from an Aggregator or because there is no suitable Aggregator available for it to select. This value is read-only.
OBJECT-TYPE    
  InterfaceIndex  

alclnkaggAggPortAttachedAggID 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.13
The identifier value of the Aggregator that this Aggregation Port is currently attached to. Zero indicates that the Aggregation Port is not currently attached to an Aggregator. This value is read-only.
OBJECT-TYPE    
  InterfaceIndex  

alclnkaggAggPortActorPort 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.14
The port number locally assigned to the Aggregation Port. The port number is communicated in LACPDUs as the Actor_Port. This value is read-only.
OBJECT-TYPE    
  INTEGER 0..65535  

alclnkaggAggPortActorPortPriority 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.15
The priority value assigned to this Aggregation Port. This 16-bit value is read-create.
OBJECT-TYPE    
  INTEGER 0..255  

alclnkaggAggPortPartnerAdminPort 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.16
The current administrative value of the port number for the protocol Partner. This is a 16-bit read-create value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
OBJECT-TYPE    
  INTEGER 0..65535  

alclnkaggAggPortPartnerOperPort 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.17
The operational port number assigned to this Aggregation Port by the Aggregation Port's protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPort if there is no protocol Partner. This 16-bit value is read-only.
OBJECT-TYPE    
  INTEGER 0..65535  

alclnkaggAggPortPartnerAdminPortPriority 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.18
The current administrative value of the port priority for the protocol Partner. This is a 16-bit read-create value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, and aAggPortPartnerAdminPort, in order to achieve manually configured aggregation.
OBJECT-TYPE    
  INTEGER 0..255  

alclnkaggAggPortPartnerOperPortPriority 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.19
The priority value assigned to this Aggregation Port by the Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPortPriority if there is no protocol Partner. This 16-bit value is read-only.
OBJECT-TYPE    
  INTEGER 0..255  

alclnkaggAggPortActorAdminState 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.20
A string of 8 bits, corresponding to the administrative values of Actor_State () as transmitted by the Actor in LACPDUs. The first bit corresponds to bit 0 of Actor_State (LACP_Activity), the second bit corresponds to bit 1 (LACP_Timeout), the third bit corresponds to bit 2 (Aggregation), the fourth bit corresponds to bit 3 (Synchronization), the fifth bit corresponds to bit 4 (Collecting), the sixth bit corresponds to bit 5 (Distributing), the seventh bit corresponds to bit 6 (Defaulted), and the eighth bit corresponds to bit 7 (Expired). These values allow administrative control over the values of LACP_Activity, LACP_Timeout and Aggregation. This attribute value is read-create.
OBJECT-TYPE    
  LacpState  

alclnkaggAggPortActorOperState 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.21
A string of 8 bits, corresponding to the current operational values of Actor_State as transmitted by the Actor in LACPDUs. The bit allocations are as defined in . This attribute value is read-only.
OBJECT-TYPE    
  LacpState  

alclnkaggAggPortPartnerAdminState 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.22
A string of 8 bits, corresponding to the current administrative value of Actor_State for the protocol Partner. The bit allocations are as defined in . This attribute value is read-create. The assigned value is used in order to achieve manually configured aggregation.
OBJECT-TYPE    
  LacpState  

alclnkaggAggPortPartnerOperState 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.23
A string of 8 bits, corresponding to the current values of Actor_State in the most recently received LACPDU transmitted by the protocol Partner. The bit allocations are as defined in . In the absence of an active protocol Partner, this value may reflect the manually configured value aAggPortPartnerAdminState. This attribute value is read-only.
OBJECT-TYPE    
  LacpState  

alclnkaggAggPortSelectedAggNumber 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.24
Aggreagtor number to attach a port at its creation mandatory and only used for the Omnichhannel not allowed for LACP (-1) value displayed when it is not significant
OBJECT-TYPE    
  INTEGER -1..127  

alclnkaggAggPortGlobalPortNumber 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.25
Physical reference of the port
OBJECT-TYPE    
  INTEGER 0..65535  

alclnkaggAggPortAdminState 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.26
status assigned by the admnistrator. port activation done by iftable this nominator is equivalent to ifAdminStatus in ifTable
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alclnkaggAggPortOperState 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.27
Operational status of the port regarding the traffic
OBJECT-TYPE    
  INTEGER up(1), down(2), notAttached(3), notAggregable(4)  

alclnkaggAggPortState 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.28
aggregation status of the port
OBJECT-TYPE    
  INTEGER created(1), configurable(2), configured(3), selected(4), reserved(5), attached(6)  

alclnkaggAggPortLinkState 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.29
Operational status of the link
OBJECT-TYPE    
  INTEGER up(1), down(2)  

alclnkaggAggPortPrimary 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.30
port primary or not
OBJECT-TYPE    
  INTEGER yes(1), no(2), notSignificant(3)  

alclnkaggAggPortLacpType 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.31
Port set with LACP protocol or not (case of Omnichannel) mandatory at the creation of the port
OBJECT-TYPE    
  LacpType  

alclnkaggAggPortRowStatus 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.32
This object is the RowStatus (locking flag) for creating or deleting aggregatable port objects. alclnkaggAggPortActorAdminKey and alclnkaggAggPortSlotSlice must be supplied in the request to create a row, it is a required field.
OBJECT-TYPE    
  RowStatus  

alclnkaggAggPortStandbyState 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.33
This sets the standby state for a port. The default value is disable.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alclnkaggAggPortStatsTable 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.2
A table that contains Link Aggregation information about every port that is associated with this device. A row appears in this table for each physical port.
OBJECT-TYPE    
  SEQUENCE OF  
    AlclnkaggAggPortStatsEntry

alclnkaggAggPortStatsEntry 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.2.1
A list of Link Aggregation Control Protocol statistics for each port on this device.
OBJECT-TYPE    
  AlclnkaggAggPortStatsEntry  

alclnkaggAggPortStatsLACPDUsRx 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.2.1.1
The number of valid LACPDUs received on this Aggregation Port. This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggAggPortStatsMarkerPDUsRx 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.2.1.2
The number of valid Marker PDUs received on this Aggregation Port. This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggAggPortStatsMarkerResponsePDUsRx 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.2.1.3
The number of valid Marker Response PDUs received on this Aggregation Port. This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggAggPortStatsUnknownRx 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.2.1.4
The number of frames received that either: - carry the Slow Protocols Ethernet Type value (), but contain an unknown PDU, or: - are addressed to the Slow Protocols group MAC Address (), but do not carry the Slow Protocols Ethernet Type. This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggAggPortStatsIllegalRx 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.2.1.5
The number of frames received that carry the Slow Protocols Ethernet Type value (), but contain a badly formed PDU or an illegal value of Protocol Subtype (). This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggAggPortStatsLACPDUsTx 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.2.1.6
The number of LACPDUs transmitted on this Aggregation Port. This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggAggPortStatsMarkerPDUsTx 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.2.1.7
The number of Marker PDUs transmitted on this Aggregation Port. This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggAggPortStatsMarkerResponsePDUsTx 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.2.1.8
The number of Marker Response PDUs transmitted on this Aggregation Port. This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggAggPortDebugTable 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3
A table that contains Link Aggregation debug information about every port that is associated with this device. A row appears in this table for each physical port.
OBJECT-TYPE    
  SEQUENCE OF  
    AlclnkaggAggPortDebugEntry

alclnkaggAggPortDebugEntry 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3.1
A list of the debug parameters for a port.
OBJECT-TYPE    
  AlclnkaggAggPortDebugEntry  

alclnkaggAggPortDebugRxState 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3.1.1
This attribute holds the value 'current' if the Receive state machine for the Aggregation Port is in the CURRENT state, 'expired' if the Receive state machine. is in the EXPIRED state, 'defaulted' if the Receive state machine is in the DEFAULTED state, 'initialize' if the Receive state machine is in the INITIALIZE state, 'lacpDisabled' if the Receive state machine is in the LACP_DISABLED state, or 'portDisabled' if the Receive state machine is in the PORT_DISABLED state. This value is read-only.
OBJECT-TYPE    
  INTEGER current(1), expired(2), defaulted(3), initialize(4), lacpDisabled(5), portDisabled(6)  

alclnkaggAggPortDebugLastRxTime 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3.1.2
The value of aTimeSinceSystemReset (F.2.1) when the last LACPDU was received by this Aggregation Port. This value is read-only.
OBJECT-TYPE    
  TimeTicks  

alclnkaggAggPortDebugMuxState 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3.1.3
This attribute holds the value `detached' if the Mux state machine (43.4.14) for the Aggregation Port is in the DETACHED state, `waiting' if the Mux state machine is in the WAITING state, `attached' if the Mux state machine for the Aggregation Port is in the ATTACHED state, `collecting' if the Mux state machine for the Aggregation Port is in the COLLECTING state, `distributing' if the Mux state machine for the Aggregation Port is in the DISTRIBUTING state, and `collectingDistributing' if the Mux state machine for the Aggregation Port is in the COLLECTING_DISTRIBUTING state. This value is read-only.
OBJECT-TYPE    
  INTEGER detached(1), waiting(2), attached(3), collecting(4), distributing(5), collectingDistributing(6)  

alclnkaggAggPortDebugMuxReason 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3.1.4
A human-readable text string indicating the reason for the most recent change of Mux machine state. This value is read-only.
OBJECT-TYPE    
  DisplayString  

alclnkaggAggPortDebugActorChurnState 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3.1.5
The state of the Actor Churn Detection machine () for the Aggregation Port. A value of 'noChurn' indicates that the state machine is in either the NO_ACTOR_CHURN or the ACTOR_CHURN_MONITOR state, and 'churn' indicates that the state machine is in the ACTOR_CHURN state. This value is read-only.
OBJECT-TYPE    
  ChurnState  

alclnkaggAggPortDebugPartnerChurnState 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3.1.6
The state of the Partner Churn Detection machine () for the Aggregation Port. A value of 'noChurn' indicates that the state machine is in either the NO_PARTNER_CHURN or the PARTNER_CHURN_MONITOR state, and 'churn' indicates that the state machine is in the PARTNER_CHURN state. This value is read-only.
OBJECT-TYPE    
  ChurnState  

alclnkaggAggPortDebugActorChurnCount 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3.1.7
Count of the number of times the Actor Churn state machine has entered the ACTOR_CHURN state. This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggAggPortDebugPartnerChurnCount 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3.1.8
Count of the number of times the Partner Churn state machine has entered the PARTNER_CHURN state. This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggAggPortDebugActorSyncTransitionCount 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3.1.9
Count of the number of times the Actor's Mux state machine () has entered the IN_SYNC state. This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggAggPortDebugPartnerSyncTransitionCount 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3.1.10
Count of the number of times the Partner's Mux state machine () has entered the IN_SYNC state. This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggAggPortDebugActorChangeCount 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3.1.11
Count of the number of times the Actor's perception of the LAG ID for this Aggregation Port has changed. This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggAggPortDebugPartnerChangeCount 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3.1.12
Count of the number of times the Partner's perception of the LAG ID (see ) for this Aggregation Port has changed. This value is read-only.
OBJECT-TYPE    
  Counter32  

alclnkaggTablesLastChanged 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.3
This object indicates the time of the most recent change to the alclnkaggAggTable, alclnkaggAggPortListTable, or alclnkaggAggPortTable.
OBJECT-TYPE    
  TimeTicks  

lnkaggNotificationVars 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.4
OBJECT IDENTIFIER    

traplnkaggAggId 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.4.1
Index Value of Link Aggregation group .
OBJECT-TYPE    
  INTEGER 0..32  

traplnkaggPortIfIndex 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.4.2
Port of Link Aggregate group .
OBJECT-TYPE    
  INTEGER 1..2147483647  

alcatelIND1LAGMIBConformance 1.3.6.1.4.1.6486.800.1.2.1.13.1.2
Branch For Link Aggregation Subsystem Conformance Information.
OBJECT-IDENTITY    

alcatelIND1LAGMIBGroups 1.3.6.1.4.1.6486.800.1.2.1.13.1.2.1
Branch For Link Aggregation Subsystem Units Of Conformance.
OBJECT-IDENTITY    

alclnkaggAggGroup 1.3.6.1.4.1.6486.800.1.2.1.13.1.2.1.1
A collection of objects providing information about an aggregation.
OBJECT-GROUP    

alclnkaggTablesLastChangedGroup 1.3.6.1.4.1.6486.800.1.2.1.13.1.2.1.1.6
A collection of objects providing information about the time of changes to the configuration of aggregations and their ports.
OBJECT-GROUP    

alclnkaggAggPortListGroup 1.3.6.1.4.1.6486.800.1.2.1.13.1.2.1.2
A collection of objects providing information about every port in an aggregation.
OBJECT-GROUP    

alclnkaggAggPortGroup 1.3.6.1.4.1.6486.800.1.2.1.13.1.2.1.3
A collection of objects providing information about every port in an aggregation.
OBJECT-GROUP    

alclnkaggAggPortStatsGroup 1.3.6.1.4.1.6486.800.1.2.1.13.1.2.1.4
A collection of objects providing information about every port in an aggregation.
OBJECT-GROUP    

alclnkaggAggPortDebugGroup 1.3.6.1.4.1.6486.800.1.2.1.13.1.2.1.5
A collection of objects providing debug information about. every aggregated port.
OBJECT-GROUP    

lnkaggNotificationVarsGroup 1.3.6.1.4.1.6486.800.1.2.1.13.1.2.1.7
Collection of objects which appear only in notifications.
OBJECT-GROUP    

lnkaggTrapsGroup 1.3.6.1.4.1.6486.800.1.2.1.13.1.2.1.8
Collection of Traps for Link Aggregation .
NOTIFICATION-GROUP    

alcatelIND1LAGMIBCompliances 1.3.6.1.4.1.6486.800.1.2.1.13.1.2.2
Branch For Link Aggregation Subsystem Compliance Statements.
OBJECT-IDENTITY    

alclnkaggAggCompliance 1.3.6.1.4.1.6486.800.1.2.1.13.1.2.2.1
The compliance statement for device support of Link Aggregation.
MODULE-COMPLIANCE    

lnkaggAggUp 1.3.6.1.4.1.6486.800.1.3.2.14.0.1
The Link Aggregation is active . This trap is sent when any one port of the link aggregation goes to attached state.
NOTIFICATION-TYPE    
  traplnkaggAggId  
  traplnkaggPortIfIndex  

lnkaggAggDown 1.3.6.1.4.1.6486.800.1.3.2.14.0.2
The Link Aggregation is not active . This trap is sent when all ports of the link aggregation goes out of attached state.
NOTIFICATION-TYPE    
  traplnkaggAggId  
  traplnkaggPortIfIndex  

lnkaggPortJoin 1.3.6.1.4.1.6486.800.1.3.2.14.0.3
The Link Aggregation port joins the aggregate . This trap is sent when given port of the link aggregation goes to attached state.
NOTIFICATION-TYPE    
  traplnkaggAggId  
  traplnkaggPortIfIndex  

lnkaggPortLeave 1.3.6.1.4.1.6486.800.1.3.2.14.0.4
The Link Aggregation port leaves the aggregate . This trap is sent when given port of the link aggregation goes out of attached state.
NOTIFICATION-TYPE    
  traplnkaggAggId  
  traplnkaggPortIfIndex  

lnkaggPortRemove 1.3.6.1.4.1.6486.800.1.3.2.14.0.5
The Link Aggregation port removed from the aggregate . This trap is sent when given port of the link aggregation removed due to invalid configuration .
NOTIFICATION-TYPE    
  traplnkaggAggId  
  traplnkaggPortIfIndex  

lnkaggPortReserve 1.3.6.1.4.1.6486.800.1.3.2.14.0.6
The Link Aggregation port is reserved for this aggregate . This trap is sent when given port of the link aggregation goes to reserved state.
NOTIFICATION-TYPE    
  traplnkaggAggId  
  traplnkaggPortIfIndex  

Defined Objects

LacpType  
The object supports or not (Omnichannel) the LACP protocol .
TEXTUAL-CONVENTION    
  INTEGER lacpOff(0), lacpOn(1)  

AlclnkaggAggEntry  
SEQUENCE    
  InterfaceIndex as alclnkaggAggIndex  
  MacAddress as alclnkaggAggMACAddress  
  INTEGER as alclnkaggAggActorSystemPriority  
  MacAddress as alclnkaggAggActorSystemID  
  LacpKey as alclnkaggAggPartnerAdminKey  
  LacpKey as alclnkaggAggActorAdminKey  
  LacpKey as alclnkaggAggActorOperKey  
  MacAddress as alclnkaggAggPartnerSystemID  
  INTEGER as alclnkaggAggPartnerSystemPriority  
  LacpKey as alclnkaggAggPartnerOperKey  
  INTEGER as alclnkaggAggSize  
  INTEGER as alclnkaggAggNumber  
  DisplayString as alclnkaggAggDescr  
  DisplayString as alclnkaggAggName  
  LacpType as alclnkaggAggLacpType  
  INTEGER as alclnkaggAggAdminState  
  INTEGER as alclnkaggAggOperState  
  INTEGER as alclnkaggAggNbrSelectedPorts  
  INTEGER as alclnkaggAggNbrAttachedPorts  
  InterfaceIndex as alclnkaggAggPrimaryPortIndex  
  INTEGER as alclnkaggAggPrimaryPortPosition  
  RowStatus as alclnkaggAggRowStatus  
  INTEGER as alclnkaggAggPreemptState  
  Integer32 as alclnkaggAggPreemptValue  

AlclnkaggAggPortListEntry  
SEQUENCE    
  PortList as alclnkaggAggPortListPorts  

AlclnkaggAggPortEntry  
SEQUENCE    
  InterfaceIndex as alclnkaggAggPortIndex  
  INTEGER as alclnkaggAggPortActorSystemPriority  
  MacAddress as alclnkaggAggPortActorSystemID  
  LacpKey as alclnkaggAggPortActorAdminKey  
  LacpKey as alclnkaggAggPortActorOperKey  
  INTEGER as alclnkaggAggPortPartnerAdminSystemPriority  
  INTEGER as alclnkaggAggPortPartnerOperSystemPriority  
  MacAddress as alclnkaggAggPortPartnerAdminSystemID  
  MacAddress as alclnkaggAggPortPartnerOperSystemID  
  LacpKey as alclnkaggAggPortPartnerAdminKey  
  LacpKey as alclnkaggAggPortPartnerOperKey  
  InterfaceIndex as alclnkaggAggPortSelectedAggID  
  InterfaceIndex as alclnkaggAggPortAttachedAggID  
  INTEGER as alclnkaggAggPortActorPort  
  INTEGER as alclnkaggAggPortActorPortPriority  
  INTEGER as alclnkaggAggPortPartnerAdminPort  
  INTEGER as alclnkaggAggPortPartnerOperPort  
  INTEGER as alclnkaggAggPortPartnerAdminPortPriority  
  INTEGER as alclnkaggAggPortPartnerOperPortPriority  
  LacpState as alclnkaggAggPortActorAdminState  
  LacpState as alclnkaggAggPortActorOperState  
  LacpState as alclnkaggAggPortPartnerAdminState  
  LacpState as alclnkaggAggPortPartnerOperState  
  INTEGER as alclnkaggAggPortSelectedAggNumber  
  INTEGER as alclnkaggAggPortGlobalPortNumber  
  INTEGER as alclnkaggAggPortAdminState  
  INTEGER as alclnkaggAggPortOperState  
  INTEGER as alclnkaggAggPortState  
  INTEGER as alclnkaggAggPortLinkState  
  INTEGER as alclnkaggAggPortPrimary  
  LacpType as alclnkaggAggPortLacpType  
  RowStatus as alclnkaggAggPortRowStatus  
  INTEGER as alclnkaggAggPortStandbyState  

AlclnkaggAggPortStatsEntry  
SEQUENCE    
  Counter32 as alclnkaggAggPortStatsLACPDUsRx  
  Counter32 as alclnkaggAggPortStatsMarkerPDUsRx  
  Counter32 as alclnkaggAggPortStatsMarkerResponsePDUsRx  
  Counter32 as alclnkaggAggPortStatsUnknownRx  
  Counter32 as alclnkaggAggPortStatsIllegalRx  
  Counter32 as alclnkaggAggPortStatsLACPDUsTx  
  Counter32 as alclnkaggAggPortStatsMarkerPDUsTx  
  Counter32 as alclnkaggAggPortStatsMarkerResponsePDUsTx  

AlclnkaggAggPortDebugEntry  
SEQUENCE    
  INTEGER as alclnkaggAggPortDebugRxState  
  TimeTicks as alclnkaggAggPortDebugLastRxTime  
  INTEGER as alclnkaggAggPortDebugMuxState  
  DisplayString as alclnkaggAggPortDebugMuxReason  
  ChurnState as alclnkaggAggPortDebugActorChurnState  
  ChurnState as alclnkaggAggPortDebugPartnerChurnState  
  Counter32 as alclnkaggAggPortDebugActorChurnCount  
  Counter32 as alclnkaggAggPortDebugPartnerChurnCount  
  Counter32 as alclnkaggAggPortDebugActorSyncTransitionCount  
  Counter32 as alclnkaggAggPortDebugPartnerSyncTransitionCount  
  Counter32 as alclnkaggAggPortDebugActorChangeCount  
  Counter32 as alclnkaggAggPortDebugPartnerChangeCount  

AlclnkaggSlotEntry  
SEQUENCE    
  INTEGER as alclnkaggSlotNum  
  INTEGER as alclnkaggSlotStatus  
  INTEGER as alclnkaggMultipleAggPerSlot  

AlclnkaggAggIdIfIndexEntry  
SEQUENCE    
  INTEGER as alclnkaggIfIndex  
  INTEGER as alclnkaggAggId