ALCATEL-IND1-PORT-MAPPING

File: ALCATEL-IND1-PORT-MAPPING.mib (8970 bytes)

Imported modules

SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
IF-MIB ALCATEL-IND1-BASE

Imported symbols

MODULE-COMPLIANCE OBJECT-GROUP OBJECT-TYPE
MODULE-IDENTITY OBJECT-IDENTITY RowStatus
InterfaceIndexOrZero softentIND1PortMapping

Defined Objects

alcatelIND1PortMappingMIB 1.3.6.1.4.1.6486.800.1.2.1.33.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Port Mapping session control The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
MODULE-IDENTITY    

alcatelIND1PortMappingMIBObjects 1.3.6.1.4.1.6486.800.1.2.1.33.1.1
Branch For Port Mapping Subsystem Managed Objects.
OBJECT-IDENTITY    

portMapping 1.3.6.1.4.1.6486.800.1.2.1.33.1.1.1
OBJECT IDENTIFIER    

portMappingSessionTable 1.3.6.1.4.1.6486.800.1.2.1.33.1.1.1.1
A list of port mapping session instances.
OBJECT-TYPE    
  SEQUENCE OF  
    PMapSessionEntry

pmapSessionEntry 1.3.6.1.4.1.6486.800.1.2.1.33.1.1.1.1.1
A port mapping entry.
OBJECT-TYPE    
  PMapSessionEntry  

pmapSessionNumber 1.3.6.1.4.1.6486.800.1.2.1.33.1.1.1.1.1.1
Identifies a specific port mapping instance.
OBJECT-TYPE    
  INTEGER 1..2147483647  

pmapSessionStatus 1.3.6.1.4.1.6486.800.1.2.1.33.1.1.1.1.1.2
Whether port mapping is configured with or without user/network ports. the session is disabled by default. The switch administrator has to explicity enable a session once configured. Also a session can only be enabled if there are 2 or more user/network ports in that session.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

pmapSessionDirection 1.3.6.1.4.1.6486.800.1.2.1.33.1.1.1.1.1.3
The session direction (uni/ bi) for this sessions network ports.
OBJECT-TYPE    
  INTEGER uni(1), bi(2)  

pmapSessionRowStatus 1.3.6.1.4.1.6486.800.1.2.1.33.1.1.1.1.1.4
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

pmapSessionUnknownUnicastFloodStatus 1.3.6.1.4.1.6486.800.1.2.1.33.1.1.1.1.1.5
To enable or disable unknown unicast flooding from network port to user ports for this session.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

pmapSessionDynProxyARP 1.3.6.1.4.1.6486.800.1.2.1.33.1.1.1.1.1.6
Enables/disables Dynamic proxy ARP on the port mapping session.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

portMappingTable 1.3.6.1.4.1.6486.800.1.2.1.33.1.1.1.2
A list of port mapping table instances.
OBJECT-TYPE    
  SEQUENCE OF  
    PMapEntry

pmapEntry 1.3.6.1.4.1.6486.800.1.2.1.33.1.1.1.2.1
A port mapping entry.
OBJECT-TYPE    
  PMapEntry  

pmapPortIfIndex 1.3.6.1.4.1.6486.800.1.2.1.33.1.1.1.2.1.1
The physical identification number for this port (user/network port).
OBJECT-TYPE    
  InterfaceIndexOrZero  

pmapPortType 1.3.6.1.4.1.6486.800.1.2.1.33.1.1.1.2.1.2
The logical group (user/network) number for this port instance.
OBJECT-TYPE    
  INTEGER user(1), network(2)  

pmapRowStatus 1.3.6.1.4.1.6486.800.1.2.1.33.1.1.1.2.1.3
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

pmapConformance 1.3.6.1.4.1.6486.800.1.2.1.33.1.2
OBJECT IDENTIFIER    

pmapGroups 1.3.6.1.4.1.6486.800.1.2.1.33.1.2.1
OBJECT IDENTIFIER    

pmapSessionTableGroup 1.3.6.1.4.1.6486.800.1.2.1.33.1.2.1.1
Mandatory objects for the Port Mapping Session Table group
OBJECT-GROUP    

pmapTableGroup 1.3.6.1.4.1.6486.800.1.2.1.33.1.2.1.2
Mandatory objects for the Port Mapping Table group
OBJECT-GROUP    

pmapCompliances 1.3.6.1.4.1.6486.800.1.2.1.33.1.2.2
OBJECT IDENTIFIER    

pmapCompliance 1.3.6.1.4.1.6486.800.1.2.1.33.1.2.2.1
The compliance statement for support of Port Mapping.
MODULE-COMPLIANCE    

Defined Objects

PMapSessionEntry  
SEQUENCE    
  INTEGER as pmapSessionNumber  
  INTEGER as pmapSessionStatus  
  INTEGER as pmapSessionDirection  
  RowStatus as pmapSessionRowStatus  
  INTEGER as pmapSessionUnknownUnicastFloodStatus  
  INTEGER as pmapSessionDynProxyARP  

PMapEntry  
SEQUENCE    
  InterfaceIndexOrZero as pmapPortIfIndex  
  INTEGER as pmapPortType  
  RowStatus as pmapRowStatus