ALCATEL-IND1-PORT-MIRRORING-MONITORING-MIB

File: ALCATEL-IND1-PORT-MIRRORING-MONITORING-MIB.mib (29831 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
IF-MIB ALCATEL-IND1-BASE SFLOW-MIB
INET-ADDRESS-MIB

Imported symbols

OBJECT-TYPE MODULE-IDENTITY OBJECT-IDENTITY
NOTIFICATION-TYPE MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP DisplayString TEXTUAL-CONVENTION
RowStatus InterfaceIndex portMirroringMonitoringTraps
softentIND1PortMirroringMonitoring sFlowFsEntry sFlowCpEntry
InetAddress InetAddressType

Defined Objects

alcatelIND1PortMirrorMonitoringMIB 1.3.6.1.4.1.6486.800.1.2.1.19.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Port Mirroring and Monitoring for mirroring/monitoring session control The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
MODULE-IDENTITY    

alcatelIND1PortMirMonMIBObjects 1.3.6.1.4.1.6486.800.1.2.1.19.1.1
Branch For Port Mirroring and Monitoring Subsystem Managed Objects.
OBJECT-IDENTITY    

mirmonMirroring 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.1
OBJECT IDENTIFIER    

mirrorTable 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.1.1
A list of port mirroring instances.
OBJECT-TYPE    
  SEQUENCE OF  
    MirrorEntry

mirrorEntry 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.1.1.1
A port mirroring entry.
OBJECT-TYPE    
  MirrorEntry  

mirrorSessionNumber 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.1.1.1.1
Identifies a specific port mirroring instance.
OBJECT-TYPE    
  INTEGER 1..2147483647  

mirrorMirroredIfindex 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.1.1.1.2
This variable is deprecated and value will be ignored. Please use mirrorSrcTable to configure mirrored ports. The physical identification number for this mirroring port instance (mirrorred port).
OBJECT-TYPE    
  InterfaceIndex  

mirrorMirroringIfindex 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.1.1.1.3
The physical identification number for this mirroring port instance (mirroring port).
OBJECT-TYPE    
  InterfaceIndex  

mirrorStatus 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.1.1.1.4
Whether mirroring is enabled or disabled for this port. Prior to enabling mirroring, or at the same time all other read write values in this table for the same row must be set to appropriate values, or defaults will be assumed.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

mirrorUnblockedVLAN 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.1.1.1.5
A VLAN identifier which specifies the VLAN identifier that must remain unblocked no matter what is the output of the spanning tree algorithm.Value 0 indicates this parameter is not set
OBJECT-TYPE    
  INTEGER 0..2147483647  

mirrorRowStatus 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.1.1.1.6
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

mirrorDirection 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.1.1.1.7
This variable is deprecated and the value will be ignored. Please use mirrorSrcTable to set the direction of mirroring. Direction of mirroring.
OBJECT-TYPE    
  INTEGER inport(1), outport(2), bidirectional(3)  

mirrorSessOperStatus 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.1.1.1.8
Whether mirroring session is active.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

mirrorTaggedVLAN 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.1.1.1.9
A VLAN identifier which specifies the VLAN identifier that must used to tag the mirrored packets going out of the MTP for remote port mirroring .Value 0 indicates this parameter is not set
OBJECT-TYPE    
  INTEGER 0..2147483647  

mirrorSrcTable 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.1.2
A list of port mirroring instances.
OBJECT-TYPE    
  SEQUENCE OF  
    MirrorSrcEntry

mirrorSrcEntry 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.1.2.1
A port mirroring entry.
OBJECT-TYPE    
  MirrorSrcEntry  

mirrorSrcMirroredIf 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.1.2.1.1
The physical identification number for this mirroring port instance (mirrorred port).
OBJECT-TYPE    
  InterfaceIndex  

mirrorSrcStatus 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.1.2.1.2
Whether mirroring is enabled or disabled for this port. Prior to enabling mirroring, or at the same time all other read write values in this table for the same row must be set to appropriate values, or defaults will be assumed.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mirrorSrcDirection 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.1.2.1.3
Direction of mirroring on the source port of this entry.
OBJECT-TYPE    
  INTEGER inport(1), outport(2), bidirectional(3)  

mirrorSrcRowStatus 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.1.2.1.4
The status of this table entry.Row Status to control creation, modification and deletion of this entry.
OBJECT-TYPE    
  RowStatus  

mirrorSrcOperStatus 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.1.2.1.5
The mirroring operational status of this mirrored source.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

mirmonMonitoring 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.2
OBJECT IDENTIFIER    

monitorTable 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.2.1
A list of port monitoring instances.
OBJECT-TYPE    
  SEQUENCE OF  
    MonitorEntry

monitorEntry 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.2.1.1
A port monitoring entry.
OBJECT-TYPE    
  MonitorEntry  

monitorSessionNumber 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.2.1.1.1
Identifies a specific port monitoring instance.
OBJECT-TYPE    
  INTEGER 1..2147483647  

monitorIfindex 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.2.1.1.2
The physical identification number for this monitoring port instance.
OBJECT-TYPE    
  InterfaceIndex  

monitorFileStatus 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.2.1.1.3
The status of the file option of a monitoring port instance (default off)
OBJECT-TYPE    
  INTEGER off(1), on(2)  

monitorFileName 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.2.1.1.4
The name of the file in which the traffic will be stored (default PMONITOR.ENC).
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

monitorFileSize 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.2.1.1.5
The number of 16384 ( 16K ) bytes allowed for the file. The file contains only the last monitorFileSize bytes of the current port monitoring instance (default 16384 bytes).
OBJECT-TYPE    
  INTEGER 1..2147483647  

monitorScreenStatus 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.2.1.1.6
The status of the screen option of a monitoring port instance (default off)
OBJECT-TYPE    
  INTEGER off(1), on(2)  

monitorScreenLine 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.2.1.1.7
The number of lines used when the screen option is activated (default 24)
OBJECT-TYPE    
  INTEGER 1..2147483647  

monitorTrafficType 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.2.1.1.8
The type of traffic being monitored (default all)
OBJECT-TYPE    
  INTEGER all(1), unicast(2), multicast(3), broadcast(4), unimulti(5), unibroad(6), multibroad(7)  

monitorStatus 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.2.1.1.9
The status of the port monitoring instance
OBJECT-TYPE    
  INTEGER off(1), on(2), suspended(3)  

monitorFileOverWrite 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.2.1.1.10
The status of the File Over Write option of a monitoring port instance (default on)
OBJECT-TYPE    
  INTEGER off(1), on(2)  

monitorDirection 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.2.1.1.11
Direction of monitoring.
OBJECT-TYPE    
  INTEGER inport(1), outport(2), bidirectional(3)  

monitorTimeout 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.2.1.1.12
The number of seconds allowed for this session before the session gets deleted. (default:forever 0 second).
OBJECT-TYPE    
  INTEGER 0..2147483647  

monitorRowStatus 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.2.1.1.13
The status of this table entry. Create,Delete and Modify.
OBJECT-TYPE    
  RowStatus  

mirmonNotificationVars 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.3
OBJECT IDENTIFIER    

mirmonPrimarySlot 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.3.1
Slot of mirrored or monitored interface.
OBJECT-TYPE    
  INTEGER 1..2147483647  

mirmonPrimaryPort 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.3.2
Port of mirrored or monitored interface.
OBJECT-TYPE    
  INTEGER 1..2147483647  

mirroringSlot 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.3.3
Slot of mirroring interface.
OBJECT-TYPE    
  INTEGER 1..2147483647  

mirroringPort 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.3.4
Port of mirroring interface.
OBJECT-TYPE    
  INTEGER 1..2147483647  

mirMonSession 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.3.5
The Mirroring session number.
OBJECT-TYPE    
  INTEGER 1..2147483647  

mirMonError 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.3.6
The Error returned by the NI which failed to configure Mirroring/Monitoring
OBJECT-TYPE    
  MirMonErrorIds  

mirMonErrorNi 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.3.7
The NI slot number.
OBJECT-TYPE    
  INTEGER 1..2147483647  

mirmonSFlowObjects 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.4
OBJECT IDENTIFIER    

alasFlowFsTable 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.4.1
A table of the flow samplers within a device.
OBJECT-TYPE    
  SEQUENCE OF  
    AlaSFlowFsEntry

alasFlowFsEntry 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.4.1.1
Attributes of a flow sampler.
OBJECT-TYPE    
  AlaSFlowFsEntry  

alasFlowFsDeleteEntry 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.4.1.1.1
The object is used to delete entries in the sFlowFsTable. Only value 6 is supported.
OBJECT-TYPE    
  INTEGER active(1), notInService(2), delete(6)  

alasFlowCpTable 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.4.2
A table of the flow samplers within a device.
OBJECT-TYPE    
  SEQUENCE OF  
    AlaSFlowCpEntry

alasFlowCpEntry 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.4.2.1
Attributes of a flow sampler.
OBJECT-TYPE    
  AlaSFlowCpEntry  

alasFlowCpDeleteEntry 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.4.2.1.1
The object is used to delete entries in the sFlowCpTable. Only value 6 is supported.
OBJECT-TYPE    
  INTEGER active(1), notInService(2), delete(6)  

alasFlowAgentConfigType 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.4.3
The Agent Config Information 1 -- Default 2 -- sFlow Interface IP Specified by User This object has been obsoleted. Use the alaIpManagedIntfEntry objects in AlcatelIND1Ip.mib
OBJECT-TYPE    
  INTEGER default(1), user(2)  

alasFlowAgentAddressType 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.4.4
The address type of the address associated with this agent. Only ipv4 and ipv6 types are supported. This object has been obsoleted. Use the alaIpManagedIntfEntry objects in AlcatelIND1Ip.mib
OBJECT-TYPE    
  InetAddressType  

alasFlowAgentAddress 1.3.6.1.4.1.6486.800.1.2.1.19.1.1.4.5
The IP address associated with this agent. In the case of a multi-homed agent, this should be the loopback address of the agent. The sFlowAgent address must provide SNMP connectivity to the agent. The address should be an invariant that does not change as interfaces are reconfigured, enabled, disabled, added or removed. A manager should be able to use the sFlowAgentAddress as a unique key that will identify this agent over extended periods of time so that a history can be maintained. This object has been obsoleted. Use the alaIpManagedIntfEntry objects in AlcatelIND1Ip.mib
OBJECT-TYPE    
  InetAddress  

alcatelIND1PortMirMonMIBConformance 1.3.6.1.4.1.6486.800.1.2.1.19.1.2
Branch For Port Mirroring and Monitoring Subsystem Conformance Information.
OBJECT-IDENTITY    

alcatelIND1PortMirMonMIBGroups 1.3.6.1.4.1.6486.800.1.2.1.19.1.2.1
Branch For Port Mirroring and Monitoring Subsystem Units Of Conformance.
OBJECT-IDENTITY    

portMirroringGroup 1.3.6.1.4.1.6486.800.1.2.1.19.1.2.1.1
Collection of objects for management of Port Mirroring.
OBJECT-GROUP    

portMonitoringGroup 1.3.6.1.4.1.6486.800.1.2.1.19.1.2.1.2
Collection of objects for management of Port Monitoring.
OBJECT-GROUP    

portNotificationVarsGroup 1.3.6.1.4.1.6486.800.1.2.1.19.1.2.1.3
Collection of objects which appear only in notifications.
OBJECT-GROUP    

mirmonTrapsGroup 1.3.6.1.4.1.6486.800.1.2.1.19.1.2.1.4
Collection of Traps for port mirroring and monitoring.
NOTIFICATION-GROUP    

alcatelIND1PortMirMonMIBCompliances 1.3.6.1.4.1.6486.800.1.2.1.19.1.2.2
Branch For Port Mirroring and Monitoring Subsystem Compliance Statements.
OBJECT-IDENTITY    

alcatelIND1PortMirMonMIBCompliance 1.3.6.1.4.1.6486.800.1.2.1.19.1.2.2.1
Compliance statement for Port Mirroring and Monitoring.
MODULE-COMPLIANCE    

mirrorConfigError 1.3.6.1.4.1.6486.800.1.3.2.8.0.1
The Mirroring Configuration failed on NI. This trap is sent when any NI fails to configure mirroring. Due to this error, port mirroring session will be terminated.
NOTIFICATION-TYPE    
  mirmonPrimarySlot  
  mirmonPrimaryPort  
  mirroringSlot  
  mirroringPort  
  mirMonErrorNi  
  mirMonError  

monitorFileWritten 1.3.6.1.4.1.6486.800.1.3.2.8.0.2
A File Written Trap is sent when the amount of data requested by the user has been written by the port monitoring instance.
NOTIFICATION-TYPE    
  mirmonPrimarySlot  
  mirmonPrimaryPort  
  monitorFileName  
  monitorFileSize  

mirrorUnlikeNi 1.3.6.1.4.1.6486.800.1.3.2.8.0.3
The Mirroring Configuration is deleted due to the swapping of different NI board type. Port Mirroring session which was active on a slot,cannot continue with the insertion of different NI type in the same slot.
NOTIFICATION-TYPE    
  mirmonPrimarySlot  
  mirmonPrimaryPort  
  mirroringSlot  
  mirroringPort  
  mirMonErrorNi  

Defined Objects

MirrorEntry  
SEQUENCE    
  INTEGER as mirrorSessionNumber  
  InterfaceIndex as mirrorMirroredIfindex  
  InterfaceIndex as mirrorMirroringIfindex  
  INTEGER as mirrorStatus  
  INTEGER as mirrorUnblockedVLAN  
  RowStatus as mirrorRowStatus  
  INTEGER as mirrorDirection  
  INTEGER as mirrorSessOperStatus  
  INTEGER as mirrorTaggedVLAN  

MirrorSrcEntry  
SEQUENCE    
  InterfaceIndex as mirrorSrcMirroredIf  
  INTEGER as mirrorSrcStatus  
  INTEGER as mirrorSrcDirection  
  RowStatus as mirrorSrcRowStatus  
  INTEGER as mirrorSrcOperStatus  

MonitorEntry  
SEQUENCE    
  INTEGER as monitorSessionNumber  
  InterfaceIndex as monitorIfindex  
  INTEGER as monitorFileStatus  
  DisplayString as monitorFileName  
  INTEGER as monitorFileSize  
  INTEGER as monitorScreenStatus  
  INTEGER as monitorScreenLine  
  INTEGER as monitorTrafficType  
  INTEGER as monitorStatus  
  INTEGER as monitorFileOverWrite  
  INTEGER as monitorDirection  
  INTEGER as monitorTimeout  
  RowStatus as monitorRowStatus  

MirMonErrorIds  
This data type is used to define the different type of error occured while configuring Mirroring/Monitoring.
TEXTUAL-CONVENTION    
  INTEGER other(1), wrongSession(2), hwQError(3), swQError(4)  

AlaSFlowFsEntry  
SEQUENCE    
  INTEGER as alasFlowFsDeleteEntry  

AlaSFlowCpEntry  
SEQUENCE    
  INTEGER as alasFlowCpDeleteEntry