ALCATEL-IND1-QOS-MIB

File: ALCATEL-IND1-QOS-MIB.mib (433660 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
ALCATEL-IND1-BASE IF-MIB IPV6-TC

Imported symbols

OBJECT-TYPE OBJECT-IDENTITY MODULE-IDENTITY
Counter32 Counter64 Integer32
IpAddress OBJECT-GROUP MODULE-COMPLIANCE
DisplayString MacAddress RowStatus
softentIND1QoS InterfaceIndex Ipv6Address

Defined Objects

alaQoSMIB 1.3.6.1.4.1.6486.800.1.2.1.22.1
QoS and Filtering MIB
MODULE-IDENTITY    

alaQoSMIBObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.1
Branch for QoS Managed Objects.
OBJECT-IDENTITY    

alaQoSRuleTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1
Table of QoS Rule definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSRuleEntry

alaQoSRuleEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1
Definition of QoS Rule
OBJECT-TYPE    
  QoSRuleEntry  

alaQoSRuleName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.1
Name of rule
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSRuleEnabled 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.2
Is this rule enabled or not
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaQoSRuleSource 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.3
What entity created the rule.
OBJECT-TYPE    
  INTEGER ldap(1), cli(2), blt(3), api(4), imp(5)  

alaQoSRulePrecedence 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.4
Precedence value for rule. Rules are evaluated from higher precedence to lower. If rules have equal precedence, they are evaluated in the order they are received.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSRuleCondition 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.5
Name of the condition to use
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSRuleAction 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.6
Name of the action to use
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSRuleReflexive 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.7
Indicator to tell if the rule is reflexive. Reflexive rules allow specific return connections that would normally be denied.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSRuleSave 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.8
Indicator to tell whether to write out the rule during snapshot commands.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSRuleLog 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.9
Indicator to tell whether to log matches to this rule in the QoS log.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSRuleMatches 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.10
Number of times this rule has been matched.
OBJECT-TYPE    
  Counter32  

alaQoSRuleEnforced 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.11
Is this rule currenly being enforced on the switch.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSRuleActive 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.12
Is this rule enforcable by the switch.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSRuleRowStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.13
Used to create/delete rules according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSRuleValidityPeriod 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.14
Name of the validity period to use
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSRuleValidityPeriodStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.15
Status field indicating whether there is a validity period associated with this rule
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSRuleLogInterval 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.16
How often to look for packets matching this rule when logging. When 0 log as many as possible.
OBJECT-TYPE    
  Integer32 0..3600  

alaQoSRuleCountType 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.17
Which rule statistics counters to update if not all are available
OBJECT-TYPE    
  INTEGER packets(1), bytes(2)  

alaQoSRulePacketCount 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.18
Counter for packets patching this rule
OBJECT-TYPE    
  Counter64  

alaQoSRuleByteCount 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.19
Counter for bytes matching this rule
OBJECT-TYPE    
  Counter64  

alaQoSRuleExcessPacketCount 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.20
Counter for packets out of bandwidth parameters
OBJECT-TYPE    
  Counter64  

alaQoSRuleExcessByteCount 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.21
Counter for bytes out of bandwidth parameters
OBJECT-TYPE    
  Counter64  

alaQoSRuleType 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.22
The type of rule this is. Each bit represents the following: 0x1 = bridged 0x2 = routed 0x4 = multicast
OBJECT-TYPE    
  Integer32  

alaQoSRuleTrapEvents 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.23
Send SNMP trap when 'qos user-port shutdown' param or rule having action=port-disable is matched/invoked?
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSRuleDefaultList 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.24
This rule belongs to the default policy list.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSRuleGreenCount 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.25
Counter for the number of packets being green compliant.
OBJECT-TYPE    
  Counter64  

alaQoSRuleYellowCount 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.26
Counter for the number of packets being yellow compliant.
OBJECT-TYPE    
  Counter64  

alaQoSRuleRedCount 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.27
Counter for the number of packets being red compliant.
OBJECT-TYPE    
  Counter64  

alaQoSRuleNonGreenCount 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.28
Counter for the number of packets being non-green compliant.
OBJECT-TYPE    
  Counter64  

alaQoSRuleNonRedCount 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.29
Counter for the number of packets being non-red compliant.
OBJECT-TYPE    
  Counter64  

alaQoSAppliedRuleTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2
Table of QoS AppliedRule definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSAppliedRuleEntry

alaQoSAppliedRuleEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1
Definition of QoS AppliedRule
OBJECT-TYPE    
  QoSAppliedRuleEntry  

alaQoSAppliedRuleName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.1
Name of rule
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedRuleEnabled 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.2
Is this rule enabled or not
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaQoSAppliedRuleSource 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.3
What entity created the rule.
OBJECT-TYPE    
  INTEGER ldap(1), cli(2), blt(3), api(4), imp(5)  

alaQoSAppliedRulePrecedence 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.4
Precedence value for rule. Rules are evaluated from higher precedence to lower. If rules have equal precedence, they are evaluated in the order they are received.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSAppliedRuleCondition 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.5
Name of the condition to use
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedRuleAction 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.6
Name of the action to use
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedRuleReflexive 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.7
Indicator to tell if the rule is reflexive. Reflexive rules allow specific return connections that would normally be denied.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSAppliedRuleSave 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.8
Indicator to tell whether to write out the rule during snapshot commands.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSAppliedRuleLog 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.9
Indicator to tell whether to log matches to this rule in the QoS log.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSAppliedRuleMatches 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.10
Number of times this rule has been matched.
OBJECT-TYPE    
  Counter32  

alaQoSAppliedRuleEnforced 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.11
Is this rule currenly being enforced on the switch.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSAppliedRuleActive 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.12
Is this rule enforcable by the switch.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSAppliedRuleRowStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.13
Used to create/delete rules according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSAppliedRuleValidityPeriod 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.14
Name of the validity period to use
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedRuleValidityPeriodStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.15
Status field indicating whether there is a validity period associated with this rule
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedRuleLogInterval 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.16
How often to look for packets matching this rule when logging. When 0 log as many as possible.
OBJECT-TYPE    
  Integer32 0..3600  

alaQoSAppliedRuleCountType 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.17
Which rule statistics counters to update if not all are available
OBJECT-TYPE    
  INTEGER packets(1), bytes(2)  

alaQoSAppliedRulePacketCount 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.18
Counter for packets patching this rule
OBJECT-TYPE    
  Counter64  

alaQoSAppliedRuleByteCount 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.19
Counter for bytes matching this rule
OBJECT-TYPE    
  Counter64  

alaQoSAppliedRuleExcessPacketCount 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.20
Counter for packets out of bandwidth parameters
OBJECT-TYPE    
  Counter64  

alaQoSAppliedRuleExcessByteCount 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.21
Counter for bytes out of bandwidth parameters
OBJECT-TYPE    
  Counter64  

alaQoSAppliedRuleType 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.22
The type of rule this is. Each bit represents the following: 0x1 = bridged 0x2 = routed 0x4 = multicast
OBJECT-TYPE    
  Integer32  

alaQoSAppliedRuleTrapEvents 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.23
Send SNMP trap when 'qos user-port shutdown' param or rule having action=port-disable is matched/invoked?
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSAppliedRuleDefaultList 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.24
This rule belongs to the default policy list.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSAppliedRuleGreenCount 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.25
Counter for the number of packets being green compliant.
OBJECT-TYPE    
  Counter64  

alaQoSAppliedRuleYellowCount 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.26
Counter for the number of packets being yellow compliant.
OBJECT-TYPE    
  Counter64  

alaQoSAppliedRuleRedCount 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.27
Counter for the number of packets being red compliant.
OBJECT-TYPE    
  Counter64  

alaQoSAppliedRuleNonGreenCount 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.28
Counter for the number of packets being non-green compliant.
OBJECT-TYPE    
  Counter64  

alaQoSAppliedRuleNonRedCount 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.29
Counter for the number of packets being non-red compliant.
OBJECT-TYPE    
  Counter64  

alaQoSConditionTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3
Table of QoS Condition definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSConditionEntry

alaQoSConditionEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1
Definition of QoS Condition
OBJECT-TYPE    
  QoSConditionEntry  

alaQoSConditionName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.1
Name of condition
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSConditionSource 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.2
What entity created the condition.
OBJECT-TYPE    
  INTEGER ldap(1), cli(2), blt(3), api(4), imp(5)  

alaQoSConditionSourceSlot 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.3
Source physical slot used for traffic classification When 0, the port identifies an aggregate
OBJECT-TYPE    
  Integer32 0..16  

alaQoSConditionSourceSlotStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.4
Status field indicating whether the source physical slot and port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionSourcePort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.5
Source physical port range start to use for traffic classification
OBJECT-TYPE    
  Integer32 1..52  

alaQoSConditionSourcePortGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.6
Source physical port group to use for traffic classification
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSConditionSourcePortGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.7
Status field indicating whether the source physical port group needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionDestinationSlot 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.8
Destination physical slot used for traffic classification When 0, the port identifies an aggregate
OBJECT-TYPE    
  Integer32 0..16  

alaQoSConditionDestinationSlotStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.9
Status field indicating whether the destination physical slot and port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionDestinationPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.10
Destination physical port range start to use for traffic classification
OBJECT-TYPE    
  Integer32 1..52  

alaQoSConditionDestinationPortGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.11
Destination physical port group to use for traffic classification
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSConditionDestinationPortGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.12
Status field indicating whether the destination physical port group needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionSourceInterfaceType 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.13
Source physical interface type to use for traffic classification
OBJECT-TYPE    
  INTEGER ethernet(1), wan(2), ethernet10(3), ethernet100(4), ethernet1G(5), ethernet10G(6), aggregate(7)  

alaQoSConditionSourceInterfaceTypeStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.14
Status field indicating whether the source physical interface type needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionDestinationInterfaceType 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.15
Destination physical interface type to use for traffic classification
OBJECT-TYPE    
  INTEGER ethernet(1), wan(2), ethernet10(3), ethernet100(4), ethernet1G(5), ethernet10G(6), aggregate(7)  

alaQoSConditionDestinationInterfaceTypeStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.16
Status field indicating whether the destination physical interface type needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionSourceMacAddr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.17
Source MAC address to use for traffic classification
OBJECT-TYPE    
  MacAddress  

alaQoSConditionSourceMacAddrStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.18
Status field indicating whether the source MAC address & mask needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionSourceMacMask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.19
Source MAC mask to use for traffic classification
OBJECT-TYPE    
  MacAddress  

alaQoSConditionSourceMacGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.20
Source MAC group to use for traffic classification
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSConditionSourceMacGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.21
Status field indicating whether the source MAC group needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionDestinationMacAddr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.22
Destination MAC address to use for traffic classification
OBJECT-TYPE    
  MacAddress  

alaQoSConditionDestinationMacAddrStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.23
Status field indicating whether the destination MAC address & mask needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionDestinationMacMask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.24
Destination MAC mask to use for traffic classification
OBJECT-TYPE    
  MacAddress  

alaQoSConditionDestinationMacGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.25
Destination MAC group to use for traffic classification
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSConditionDestinationMacGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.26
Status field indicating whether the destination MAC group needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionSourceVlan 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.27
Source VLAN to use for traffic classification
OBJECT-TYPE    
  Integer32 0..4095  

alaQoSConditionSourceVlanStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.28
Status field indicating whether the source VLAN needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionDestinationVlan 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.29
Destination VLAN to use for traffic classification
OBJECT-TYPE    
  Integer32 0..4095  

alaQoSConditionDestinationVlanStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.30
Status field indicating whether the destination VLAN needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSCondition8021p 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.31
802.1p value to use for traffic classification
OBJECT-TYPE    
  Integer32 0..7  

alaQoSCondition8021pStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.32
Status field indicating whether the 802.1p value needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionSourceIpAddr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.33
Source IP address to use for traffic classification
OBJECT-TYPE    
  IpAddress  

alaQoSConditionSourceIpAddrStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.34
Status field indicating whether the source IP address & mask needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionSourceIpMask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.35
Source IP mask to use for traffic classification
OBJECT-TYPE    
  IpAddress  

alaQoSConditionSourceNetworkGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.36
Source network group to use for traffic classification
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSConditionSourceNetworkGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.37
Status field indicating whether the source network group needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionDestinationIpAddr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.38
Destination IP address to use for traffic classification
OBJECT-TYPE    
  IpAddress  

alaQoSConditionDestinationIpAddrStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.39
Status field indicating whether the destination IP address & mask needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionDestinationIpMask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.40
Destination IP mask to use for traffic classification
OBJECT-TYPE    
  IpAddress  

alaQoSConditionDestinationNetworkGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.41
Destination network group to use for traffic classification
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSConditionDestinationNetworkGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.42
Status field indicating whether the destination network group needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionMulticastIpAddr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.43
Multicast IP address to use for traffic classification
OBJECT-TYPE    
  IpAddress  

alaQoSConditionMulticastIpAddrStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.44
Status field indicating whether the multicast IP address & mask needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionMulticastIpMask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.45
Multicast IP mask to use for traffic classification
OBJECT-TYPE    
  IpAddress  

alaQoSConditionMulticastNetworkGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.46
Multicast network group to use for traffic classification
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSConditionMulticastNetworkGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.47
Status field indicating whether the multicast network group needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionTos 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.48
TOS value to use for traffic classification
OBJECT-TYPE    
  Integer32 0..7  

alaQoSConditionTosStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.49
Status field indicating whether the TOS value & mask needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionTosMask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.50
TOS mask to use for traffic classification
OBJECT-TYPE    
  Integer32 0..7  

alaQoSConditionDscp 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.51
DSCP value to use for traffic classification
OBJECT-TYPE    
  Integer32 0..63  

alaQoSConditionDscpStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.52
Status field indicating whether the DSCP value & mask needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionDscpMask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.53
DSCP mask to use for traffic classification
OBJECT-TYPE    
  Integer32 0..63  

alaQoSConditionIpProtocol 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.54
IP protocol to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..255  

alaQoSConditionIpProtocolStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.55
Status field indicating whether the IP protocol needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionSourceIpPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.56
Source IP port range start to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSConditionSourceIpPortStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.57
Status field indicating whether the source IP port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionDestinationIpPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.58
Destination IP port range start to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSConditionDestinationIpPortStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.59
Status field indicating whether the destination IP port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionService 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.60
Name of service to use for traffic classification
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSConditionServiceStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.61
Status field indicating whether the service needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionServiceGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.62
Name of service group to use for traffic classification
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSConditionServiceGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.63
Status field indicating whether the service group needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionIcmpType 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.64
ICMP type to use for traffic classification
OBJECT-TYPE    
  Integer32 0..255  

alaQoSConditionIcmpTypeStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.65
Status field indicating whether the ICMP type needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionIcmpCode 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.66
ICMP code to use for traffic classification
OBJECT-TYPE    
  Integer32 0..255  

alaQoSConditionIcmpCodeStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.67
Status field indicating whether the ICMP code needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionDlci 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.68
DLCI to use to traffic classification
OBJECT-TYPE    
  Integer32 0..512  

alaQoSConditionDlciStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.69
Status field indicating whether the DLCI needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionRowStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.70
Used to create/delete conditions according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSConditionSourcePortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.71
Source physical port range end to use for traffic classification. Must be greater than port range start to indicate a range. When '1', use source port as a single port.
OBJECT-TYPE    
  Integer32 1..52  

alaQoSConditionDestinationPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.72
Destination physical port range end to use for traffic classification. Must be greater than port range start to indicate a range. When '1', use destination port as a single port.
OBJECT-TYPE    
  Integer32 1..52  

alaQoSConditionSourceIpPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.73
Source IP port range end to use for traffic classification. Must be greater than source IP port range start to indicate a range. When '0', use source IP port as a single IP port.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSConditionDestinationIpPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.74
Destination IP port range end to use for traffic classification. Must be greater than destination IP port range start to indicate a range. When '0', use destination IP port as a single IP port.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSConditionSourceTcpPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.75
Source TCP port range start to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSConditionSourceTcpPortStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.76
Status field indicating whether the source TCP port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionSourceTcpPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.77
Source TCP port range end to use for traffic classification. Must be greater than source TCP port range start to indicate a range. When '0', use source TCP port as a single TCP port.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSConditionDestinationTcpPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.78
Destination TCP port range start to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSConditionDestinationTcpPortStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.79
Status field indicating whether the destination TCP port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionDestinationTcpPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.80
Destination TCP port range end to use for traffic classification. Must be greater than destination TCP port range start to indicate a range. When '0', use destination TCP port as a single TCP port.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSConditionSourceUdpPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.81
Source UDP port range start to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSConditionSourceUdpPortStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.82
Status field indicating whether the source UDP port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionSourceUdpPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.83
Source UDP port range end to use for traffic classification. Must be greater than source UDP port range start to indicate a range. When '0', use source UDP port as a single UDP port.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSConditionDestinationUdpPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.84
Destination UDP port range start to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSConditionDestinationUdpPortStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.85
Status field indicating whether the destination UDP port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionDestinationUdpPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.86
Destination UDP port range end to use for traffic classification. Must be greater than destination UDP port range start to indicate a range. When '0', use destination UDP port as a single TCP port.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSConditionEthertype 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.87
Ethertype value to use for traffic classification
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSConditionEthertypeStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.88
Status field indicating whether the ethertype value needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionTcpFlags 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.89
Use any/all specifieid TCP flags for traffic classification
OBJECT-TYPE    
  INTEGER all(1), any(2)  

alaQoSConditionTcpFlagsStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.90
Status field indicating whether the TCP flag bits needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionTcpFlagsVal 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.91
TCP flags values used for traffic classification
OBJECT-TYPE    
  Integer32  

alaQoSConditionTcpFlagsValStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.92
Not used
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionTcpFlagsMask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.93
Mask of TCP flags bits used for traffic classification
OBJECT-TYPE    
  Integer32  

alaQoSConditionTcpFlagsMaskStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.94
Not used
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionTcpEstablished 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.95
Look for established TCP sessions in classification
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSConditionSourceIpv6Addr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.96
Source IPv6 address to use for traffic classification
OBJECT-TYPE    
  Ipv6Address  

alaQoSConditionSourceIpv6AddrStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.97
Status field indicating whether the source IPv6 address & mask needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionSourceIpv6Mask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.98
Source IPv6 mask to use for traffic classification
OBJECT-TYPE    
  Ipv6Address  

alaQoSConditionDestinationIpv6Addr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.99
Destination IPv6 address to use for traffic classification
OBJECT-TYPE    
  Ipv6Address  

alaQoSConditionDestinationIpv6AddrStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.100
Status field indicating whether the destination IPv6 address & mask needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionDestinationIpv6Mask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.101
Destination IPv6 mask to use for traffic classification
OBJECT-TYPE    
  Ipv6Address  

alaQoSConditionIpv6Traffic 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.102
classify IPV6 traffic
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSConditionIpv6NH 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.103
NH value to use for traffic classification
OBJECT-TYPE    
  Integer32 0..255  

alaQoSConditionIpv6NHStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.104
Status field indicating whether the NH value needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionIpv6FlowLabel 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.105
FL value to use for traffic classification
OBJECT-TYPE    
  Integer32 0..1048575  

alaQoSConditionIpv6FlowLabelStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.106
Status field indicating whether the flow label value needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionMcastIpv6Addr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.107
Multicast IPv6 address to use for traffic classification
OBJECT-TYPE    
  Ipv6Address  

alaQoSConditionMcastIpv6AddrStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.108
Status field indicating whether the multicast IPv6 address & mask needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionMcastIpv6Mask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.109
Multicast IPv6 mask to use for traffic classification
OBJECT-TYPE    
  Ipv6Address  

alaQoSConditionDscpEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.110
DSCP value to use for traffic classification
OBJECT-TYPE    
  Integer32 0..63  

alaQoSConditionInnerSourceVlan 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.111
Customer VLAN to use for traffic classification
OBJECT-TYPE    
  Integer32 0..4095  

alaQoSConditionInnerSourceVlanStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.112
Status field indicating whether the inner VLAN needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionInner8021p 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.113
Customer 802.1p to use for traffic classification
OBJECT-TYPE    
  Integer32 0..7  

alaQoSConditionInner8021pStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.114
Status field indicating whether the inner 802.1p needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionVrfName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.115
Name of Vrf to match traffic in
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSConditionVrfNameStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.116
Status field indicating whether the traffic from a specific vrf needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSCondition8021pEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.117
802.1p range end value to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..7  

alaQoSConditionInner8021pEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.118
Inner 802.1p range end value to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..7  

alaQoSConditionSourceVlanGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.119
Source vlan group to use for traffic classification
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSConditionSourceVlanGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.120
Status field indicating whether to use for traffic classification (enabled) or not (disabled) for source vlan group.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConditionInnerSourceVlanGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.121
Inner Source vlan group to use for traffic classification
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSConditionInnerSourceVlanGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.122
Status field indicating whether to use for traffic classification (enabled) or not (disabled) for inner source vlan group.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4
Table of QoS AppliedCondition definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSAppliedConditionEntry

alaQoSAppliedConditionEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1
Definition of QoS AppliedCondition
OBJECT-TYPE    
  QoSAppliedConditionEntry  

alaQoSAppliedConditionName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.1
Name of condition
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedConditionSource 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.2
What entity created the condition.
OBJECT-TYPE    
  INTEGER ldap(1), cli(2), blt(3), api(4), imp(5)  

alaQoSAppliedConditionSourceSlot 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.3
Source physical slot used for traffic classification When 0, the port identifies an aggregate
OBJECT-TYPE    
  Integer32 0..16  

alaQoSAppliedConditionSourceSlotStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.4
Status field indicating whether the source physical slot and port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionSourcePort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.5
Source physical port range start to use for traffic classification
OBJECT-TYPE    
  Integer32 1..52  

alaQoSAppliedConditionSourcePortGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.6
Source physical port group to use for traffic classification
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedConditionSourcePortGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.7
Status field indicating whether the source physical port group needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionDestinationSlot 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.8
Destination physical slot used for traffic classification When 0, the port identifies an aggregate
OBJECT-TYPE    
  Integer32 0..16  

alaQoSAppliedConditionDestinationSlotStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.9
Status field indicating whether the destination physical slot and port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionDestinationPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.10
Destination physical port range start to use for traffic classification
OBJECT-TYPE    
  Integer32 1..52  

alaQoSAppliedConditionDestinationPortGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.11
Destination physical port group to use for traffic classification
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedConditionDestinationPortGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.12
Status field indicating whether the destination physical port group needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionSourceInterfaceType 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.13
Source physical interface type to use for traffic classification
OBJECT-TYPE    
  INTEGER ethernet(1), wan(2), ethernet10(3), ethernet100(4), ethernet1G(5), ethernet10G(6), aggregate(7)  

alaQoSAppliedConditionSourceInterfaceTypeStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.14
Status field indicating whether the source physical interface type needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionDestinationInterfaceType 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.15
Destination physical interface type to use for traffic classification
OBJECT-TYPE    
  INTEGER ethernet(1), wan(2), ethernet10(3), ethernet100(4), ethernet1G(5), ethernet10G(6), aggregate(7)  

alaQoSAppliedConditionDestinationInterfaceTypeStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.16
Status field indicating whether the destination physical interface type needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionSourceMacAddr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.17
Source MAC address to use for traffic classification
OBJECT-TYPE    
  MacAddress  

alaQoSAppliedConditionSourceMacAddrStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.18
Status field indicating whether the source MAC address & mask needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionSourceMacMask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.19
Source MAC mask to use for traffic classification
OBJECT-TYPE    
  MacAddress  

alaQoSAppliedConditionSourceMacGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.20
Source MAC group to use for traffic classification
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedConditionSourceMacGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.21
Status field indicating whether the source MAC group needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionDestinationMacAddr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.22
Destination MAC address to use for traffic classification
OBJECT-TYPE    
  MacAddress  

alaQoSAppliedConditionDestinationMacAddrStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.23
Status field indicating whether the destination MAC address & mask needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionDestinationMacMask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.24
Destination MAC mask to use for traffic classification
OBJECT-TYPE    
  MacAddress  

alaQoSAppliedConditionDestinationMacGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.25
Destination MAC group to use for traffic classification
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedConditionDestinationMacGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.26
Status field indicating whether the destination MAC group needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionSourceVlan 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.27
Source VLAN to use for traffic classification
OBJECT-TYPE    
  Integer32 0..4095  

alaQoSAppliedConditionSourceVlanStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.28
Status field indicating whether the source VLAN needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionDestinationVlan 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.29
Destination VLAN to use for traffic classification
OBJECT-TYPE    
  Integer32 0..4095  

alaQoSAppliedConditionDestinationVlanStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.30
Status field indicating whether the destination VLAN needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedCondition8021p 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.31
802.1p value to use for traffic classification
OBJECT-TYPE    
  Integer32 0..7  

alaQoSAppliedCondition8021pStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.32
Status field indicating whether the 802.1p value needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionSourceIpAddr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.33
Source IP address to use for traffic classification
OBJECT-TYPE    
  IpAddress  

alaQoSAppliedConditionSourceIpAddrStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.34
Status field indicating whether the source IP address & mask needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionSourceIpMask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.35
Source IP mask to use for traffic classification
OBJECT-TYPE    
  IpAddress  

alaQoSAppliedConditionSourceNetworkGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.36
Source network group to use for traffic classification
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedConditionSourceNetworkGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.37
Status field indicating whether the source network group needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionDestinationIpAddr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.38
Destination IP address to use for traffic classification
OBJECT-TYPE    
  IpAddress  

alaQoSAppliedConditionDestinationIpAddrStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.39
Status field indicating whether the destination IP address & mask needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionDestinationIpMask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.40
Destination IP mask to use for traffic classification
OBJECT-TYPE    
  IpAddress  

alaQoSAppliedConditionDestinationNetworkGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.41
Destination network group to use for traffic classification
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedConditionDestinationNetworkGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.42
Status field indicating whether the destination network group needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionMulticastIpAddr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.43
Multicast IP address to use for traffic classification
OBJECT-TYPE    
  IpAddress  

alaQoSAppliedConditionMulticastIpAddrStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.44
Status field indicating whether the multicast IP address & mask needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionMulticastIpMask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.45
Multicast IP mask to use for traffic classification
OBJECT-TYPE    
  IpAddress  

alaQoSAppliedConditionMulticastNetworkGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.46
Multicast network group to use for traffic classification
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedConditionMulticastNetworkGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.47
Status field indicating whether the multicast network group needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionTos 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.48
TOS value to use for traffic classification
OBJECT-TYPE    
  Integer32 0..7  

alaQoSAppliedConditionTosStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.49
Status field indicating whether the TOS value & mask needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionTosMask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.50
TOS mask to use for traffic classification
OBJECT-TYPE    
  Integer32 0..7  

alaQoSAppliedConditionDscp 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.51
DSCP value to use for traffic classification
OBJECT-TYPE    
  Integer32 0..63  

alaQoSAppliedConditionDscpStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.52
Status field indicating whether the DSCP value & mask needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionDscpMask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.53
DSCP mask to use for traffic classification
OBJECT-TYPE    
  Integer32 0..63  

alaQoSAppliedConditionIpProtocol 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.54
IP protocol to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..255  

alaQoSAppliedConditionIpProtocolStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.55
Status field indicating whether the IP protocol needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionSourceIpPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.56
Source IP port range start to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSAppliedConditionSourceIpPortStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.57
Status field indicating whether the source IP port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionDestinationIpPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.58
Destination IP port range start to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSAppliedConditionDestinationIpPortStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.59
Status field indicating whether the destination IP port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionService 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.60
Name of service to use for traffic classification
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedConditionServiceStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.61
Status field indicating whether the service needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionServiceGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.62
Name of service group to use for traffic classification
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedConditionServiceGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.63
Status field indicating whether the service group needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionIcmpType 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.64
ICMP type to use for traffic classification
OBJECT-TYPE    
  Integer32 0..255  

alaQoSAppliedConditionIcmpTypeStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.65
Status field indicating whether the ICMP type needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionIcmpCode 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.66
ICMP code to use for traffic classification
OBJECT-TYPE    
  Integer32 0..255  

alaQoSAppliedConditionIcmpCodeStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.67
Status field indicating whether the ICMP code needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionDlci 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.68
DLCI to use to traffic classification
OBJECT-TYPE    
  Integer32 0..512  

alaQoSAppliedConditionDlciStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.69
Status field indicating whether the DLCI needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionRowStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.70
Used to create/delete conditions according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSAppliedConditionSourcePortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.71
Source physical port range end to use for traffic classification. Must be greater than port range start to indicate a range. When '1', use source port as a single port.
OBJECT-TYPE    
  Integer32 1..52  

alaQoSAppliedConditionDestinationPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.72
Destination physical port range end to use for traffic classification. Must be greater than port range start to indicate a range. When '1', use destination port as a single port.
OBJECT-TYPE    
  Integer32 1..52  

alaQoSAppliedConditionSourceIpPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.73
Source IP port range end to use for traffic classification. Must be greater than source IP port range start to indicate a range. When '0', use source IP port as a single IP port.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSAppliedConditionDestinationIpPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.74
Destination IP port range end to use for traffic classification. Must be greater than destination IP port range start to indicate a range. When '0', use destination IP port as a single IP port.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSAppliedConditionSourceTcpPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.75
Source TCP port range start to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSAppliedConditionSourceTcpPortStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.76
Status field indicating whether the source TCP port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionSourceTcpPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.77
Source TCP port range end to use for traffic classification. Must be greater than source TCP port range start to indicate a range. When '0', use source TCP port as a single TCP port.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSAppliedConditionDestinationTcpPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.78
Destination TCP port range start to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSAppliedConditionDestinationTcpPortStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.79
Status field indicating whether the destination TCP port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionDestinationTcpPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.80
Destination TCP port range end to use for traffic classification. Must be greater than destination TCP port range start to indicate a range. When '0', use destination TCP port as a single TCP port.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSAppliedConditionSourceUdpPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.81
Source UDP port range start to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSAppliedConditionSourceUdpPortStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.82
Status field indicating whether the source UDP port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionSourceUdpPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.83
Source UDP port range end to use for traffic classification. Must be greater than source UDP port range start to indicate a range. When '0', use source UDP port as a single UDP port.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSAppliedConditionDestinationUdpPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.84
Destination UDP port range start to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSAppliedConditionDestinationUdpPortStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.85
Status field indicating whether the destination UDP port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionDestinationUdpPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.86
Destination UDP port range end to use for traffic classification. Must be greater than destination UDP port range start to indicate a range. When '0', use destination UDP port as a single TCP port.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSAppliedConditionEthertype 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.87
Ethertype value to use for traffic classification
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSAppliedConditionEthertypeStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.88
Status field indicating whether the ethertype value needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionTcpFlags 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.89
Use any/all specifieid TCP flags for traffic classification
OBJECT-TYPE    
  INTEGER all(1), any(2)  

alaQoSAppliedConditionTcpFlagsStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.90
Status field indicating whether the TCP flag bits needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionTcpFlagsVal 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.91
TCP flags values used for traffic classification
OBJECT-TYPE    
  Integer32  

alaQoSAppliedConditionTcpFlagsValStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.92
Not used
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionTcpFlagsMask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.93
Mask of TCP flags bits used for traffic classification
OBJECT-TYPE    
  Integer32  

alaQoSAppliedConditionTcpFlagsMaskStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.94
Not used
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionTcpEstablished 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.95
Look for established TCP sessions in classification
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSAppliedConditionSourceIpv6Addr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.96
Source IPv6 address to use for traffic classification
OBJECT-TYPE    
  Ipv6Address  

alaQoSAppliedConditionSourceIpv6AddrStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.97
Status field indicating whether the source IPv6 address & mask needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionSourceIpv6Mask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.98
Source IPv6 mask to use for traffic classification
OBJECT-TYPE    
  Ipv6Address  

alaQoSAppliedConditionDestinationIpv6Addr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.99
Destination IPv6 address to use for traffic classification
OBJECT-TYPE    
  Ipv6Address  

alaQoSAppliedConditionDestinationIpv6AddrStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.100
Status field indicating whether the destination IPv6 address & mask needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionDestinationIpv6Mask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.101
Destination IPv6 mask to use for traffic classification
OBJECT-TYPE    
  Ipv6Address  

alaQoSAppliedConditionIpv6Traffic 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.102
classify IPV6 traffic
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSAppliedConditionIpv6NH 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.103
NH value to use for traffic classification
OBJECT-TYPE    
  Integer32 0..255  

alaQoSAppliedConditionIpv6NHStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.104
Status field indicating whether the NH value needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionIpv6FlowLabel 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.105
FL value to use for traffic classification
OBJECT-TYPE    
  Integer32 0..1048575  

alaQoSAppliedConditionIpv6FlowLabelStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.106
Status field indicating whether the flow label value needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionMcastIpv6Addr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.107
Multicast IPv6 address to use for traffic classification
OBJECT-TYPE    
  Ipv6Address  

alaQoSAppliedConditionMcastIpv6AddrStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.108
Status field indicating whether the multicast IPv6 address & mask needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionMcastIpv6Mask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.109
Multicast IPv6 mask to use for traffic classification
OBJECT-TYPE    
  Ipv6Address  

alaQoSAppliedConditionDscpEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.110
DSCP value to use for traffic classification
OBJECT-TYPE    
  Integer32 0..63  

alaQoSAppliedConditionInnerSourceVlan 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.111
Customer VLAN to use for traffic classification
OBJECT-TYPE    
  Integer32 0..4095  

alaQoSAppliedConditionInnerSourceVlanStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.112
Status field indicating whether the inner VLAN needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionInner8021p 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.113
Customer 802.1p to use for traffic classification
OBJECT-TYPE    
  Integer32 0..7  

alaQoSAppliedConditionInner8021pStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.114
Status field indicating whether the inner 802.1p needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionVrfName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.115
Name of Vrf to match traffic in
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedConditionVrfNameStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.116
Status field indicating whether the traffic from a specific vrf needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedCondition8021pEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.117
802.1p range end value to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..7  

alaQoSAppliedConditionInner8021pEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.118
Inner 802.1p range end value to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..7  

alaQoSAppliedConditionSourceVlanGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.119
Source vlan group to use for traffic classification
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedConditionSourceVlanGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.120
Status field indicating whether to use for traffic classification (enabled) or not (disabled) for source vlan group.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedConditionInnerSourceVlanGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.121
Inner Source vlan group to use for traffic classification
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedConditionInnerSourceVlanGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.122
Status field indicating whether to use for traffic classification (enabled) or not (disabled) for inner source vlan group.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSServiceTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5
Table of QoS Service definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSServiceEntry

alaQoSServiceEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1
Definition of QoS Service
OBJECT-TYPE    
  QoSServiceEntry  

alaQoSServiceName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.1
Name of the service
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSServiceSource 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.2
What entity created the service.
OBJECT-TYPE    
  INTEGER ldap(1), cli(2), blt(3), api(4), imp(5)  

alaQoSServiceProtocol 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.3
protocol field for Service
OBJECT-TYPE    
  Integer32 0..255  

alaQoSServiceSourceIpPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.4
Source IP port range start to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSServiceSourceIpPortStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.5
Status field indicating whether the source IP port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSServiceDestinationIpPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.6
Destination IP port range start to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSServiceDestinationIpPortStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.7
Status field indicating whether the destination IP port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSServiceRowStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.8
Used to create/delete services according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSServiceSourceIpPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.9
Source IP port range end to use for traffic classification. Must be greater than source IP port range start to indicate a range. When '0', use source IP port as a single IP port.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSServiceDestinationIpPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.10
Destination IP port range end to use for traffic classification. Must be greater than destination IP port range start to indicate a range. When '0', use destination IP port as a single IP port.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSServiceSourceTcpPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.11
Source TCP port range start to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSServiceSourceTcpPortStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.12
Status field indicating whether the source TCP port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSServiceSourceTcpPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.13
Source TCP port range end to use for traffic classification. Must be greater than source TCP port range start to indicate a range. When '0', use source TCP port as a single TCP port.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSServiceDestinationTcpPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.14
Destination TCP port range start to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSServiceDestinationTcpPortStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.15
Status field indicating whether the destination TCP port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSServiceDestinationTcpPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.16
Destination TCP port range end to use for traffic classification. Must be greater than destination TCP port range start to indicate a range. When '0', use destination TCP port as a single TCP port.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSServiceSourceUdpPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.17
Source UDP port range start to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSServiceSourceUdpPortStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.18
Status field indicating whether the source UDP port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSServiceSourceUdpPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.19
Source UDP port range end to use for traffic classification. Must be greater than source UDP port range start to indicate a range. When '0', use source UDP port as a single UDP port.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSServiceDestinationUdpPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.20
Destination UDP port range start to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSServiceDestinationUdpPortStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.21
Status field indicating whether the destination UDP port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSServiceDestinationUdpPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.22
Destination UDP port range end to use for traffic classification. Must be greater than destination UDP port range start to indicate a range. When '0', use destination UDP port as a single UDP port.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSAppliedServiceTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6
Table of QoS AppliedService definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSAppliedServiceEntry

alaQoSAppliedServiceEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1
Definition of QoS AppliedService
OBJECT-TYPE    
  QoSAppliedServiceEntry  

alaQoSAppliedServiceName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.1
Name of the service
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedServiceSource 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.2
What entity created the service.
OBJECT-TYPE    
  INTEGER ldap(1), cli(2), blt(3), api(4), imp(5)  

alaQoSAppliedServiceProtocol 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.3
protocol field for AppliedService
OBJECT-TYPE    
  Integer32 0..255  

alaQoSAppliedServiceSourceIpPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.4
Source IP port range start to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSAppliedServiceSourceIpPortStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.5
Status field indicating whether the source IP port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedServiceDestinationIpPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.6
Destination IP port range start to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSAppliedServiceDestinationIpPortStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.7
Status field indicating whether the destination IP port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedServiceRowStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.8
Used to create/delete services according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSAppliedServiceSourceIpPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.9
Source IP port range end to use for traffic classification. Must be greater than source IP port range start to indicate a range. When '0', use source IP port as a single IP port.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSAppliedServiceDestinationIpPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.10
Destination IP port range end to use for traffic classification. Must be greater than destination IP port range start to indicate a range. When '0', use destination IP port as a single IP port.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSAppliedServiceSourceTcpPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.11
Source TCP port range start to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSAppliedServiceSourceTcpPortStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.12
Status field indicating whether the source TCP port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedServiceSourceTcpPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.13
Source TCP port range end to use for traffic classification. Must be greater than source TCP port range start to indicate a range. When '0', use source TCP port as a single TCP port.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSAppliedServiceDestinationTcpPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.14
Destination TCP port range start to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSAppliedServiceDestinationTcpPortStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.15
Status field indicating whether the destination TCP port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedServiceDestinationTcpPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.16
Destination TCP port range end to use for traffic classification. Must be greater than destination TCP port range start to indicate a range. When '0', use destination TCP port as a single TCP port.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSAppliedServiceSourceUdpPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.17
Source UDP port range start to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSAppliedServiceSourceUdpPortStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.18
Status field indicating whether the source UDP port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedServiceSourceUdpPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.19
Source UDP port range end to use for traffic classification. Must be greater than source UDP port range start to indicate a range. When '0', use source UDP port as a single UDP port.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSAppliedServiceDestinationUdpPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.20
Destination UDP port range start to use for traffic classification.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSAppliedServiceDestinationUdpPortStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.21
Status field indicating whether the destination UDP port range needs to be matched(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedServiceDestinationUdpPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.22
Destination UDP port range end to use for traffic classification. Must be greater than destination UDP port range start to indicate a range. When '0', use destination UDP port as a single UDP port.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSServiceGroupsTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.7
Table of QoS ServiceGroups definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSServiceGroupsEntry

alaQoSServiceGroupsEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.7.1
Definition of QoS ServiceGroups
OBJECT-TYPE    
  QoSServiceGroupsEntry  

alaQoSServiceGroupsName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.7.1.1
Name of service group
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSServiceGroupsSource 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.7.1.2
What entity created the service group.
OBJECT-TYPE    
  INTEGER ldap(1), cli(2), blt(3), api(4), imp(5)  

alaQoSServiceGroupsStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.7.1.3
Used to create/delete service groups according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSAppliedServiceGroupsTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.8
Table of QoS AppliedServiceGroups definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSAppliedServiceGroupsEntry

alaQoSAppliedServiceGroupsEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.8.1
Definition of QoS AppliedServiceGroups
OBJECT-TYPE    
  QoSAppliedServiceGroupsEntry  

alaQoSAppliedServiceGroupsName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.8.1.1
Name of service group
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedServiceGroupsSource 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.8.1.2
What entity created the service group.
OBJECT-TYPE    
  INTEGER ldap(1), cli(2), blt(3), api(4), imp(5)  

alaQoSAppliedServiceGroupsStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.8.1.3
Used to create/delete service groups according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSServiceGroupTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.9
Table of QoS ServiceGroup definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSServiceGroupEntry

alaQoSServiceGroupEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.9.1
Definition of QoS ServiceGroup
OBJECT-TYPE    
  QoSServiceGroupEntry  

alaQoSServiceGroupServiceName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.9.1.1
Name of service in service group entry
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSServiceGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.9.1.2
Used to create/delete service group entries according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSAppliedServiceGroupTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.10
Table of QoS AppliedServiceGroup definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSAppliedServiceGroupEntry

alaQoSAppliedServiceGroupEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.10.1
Definition of QoS AppliedServiceGroup
OBJECT-TYPE    
  QoSAppliedServiceGroupEntry  

alaQoSAppliedServiceGroupServiceName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.10.1.1
Name of service in service group entry
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedServiceGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.10.1.2
Used to create/delete service group entries according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSNetworkGroupsTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.11
Table of QoS NetworkGroups definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSNetworkGroupsEntry

alaQoSNetworkGroupsEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.11.1
Definition of QoS NetworkGroups
OBJECT-TYPE    
  QoSNetworkGroupsEntry  

alaQoSNetworkGroupsName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.11.1.1
Name of network group
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSNetworkGroupsSource 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.11.1.2
What entity created the network group.
OBJECT-TYPE    
  INTEGER ldap(1), cli(2), blt(3), api(4), imp(5)  

alaQoSNetworkGroupsStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.11.1.3
Used to create/delete network groups according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSAppliedNetworkGroupsTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.12
Table of QoS AppliedNetworkGroups definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSAppliedNetworkGroupsEntry

alaQoSAppliedNetworkGroupsEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.12.1
Definition of QoS AppliedNetworkGroups
OBJECT-TYPE    
  QoSAppliedNetworkGroupsEntry  

alaQoSAppliedNetworkGroupsName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.12.1.1
Name of network group
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedNetworkGroupsSource 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.12.1.2
What entity created the network group.
OBJECT-TYPE    
  INTEGER ldap(1), cli(2), blt(3), api(4), imp(5)  

alaQoSAppliedNetworkGroupsStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.12.1.3
Used to create/delete network groups according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSNetworkGroupTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.13
Table of QoS NetworkGroup definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSNetworkGroupEntry

alaQoSNetworkGroupEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.13.1
Definition of QoS NetworkGroup
OBJECT-TYPE    
  QoSNetworkGroupEntry  

alaQoSNetworkGroupIpAddr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.13.1.1
IP address for network group entry.
OBJECT-TYPE    
  IpAddress  

alaQoSNetworkGroupIpMask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.13.1.2
IP mask for network group entry.
OBJECT-TYPE    
  IpAddress  

alaQoSNetworkGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.13.1.3
Used to create/delete network group entries according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSAppliedNetworkGroupTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.14
Table of QoS AppliedNetworkGroup definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSAppliedNetworkGroupEntry

alaQoSAppliedNetworkGroupEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.14.1
Definition of QoS AppliedNetworkGroup
OBJECT-TYPE    
  QoSAppliedNetworkGroupEntry  

alaQoSAppliedNetworkGroupIpAddr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.14.1.1
IP address for network group entry.
OBJECT-TYPE    
  IpAddress  

alaQoSAppliedNetworkGroupIpMask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.14.1.2
IP mask for network group entry.
OBJECT-TYPE    
  IpAddress  

alaQoSAppliedNetworkGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.14.1.3
Used to create/delete network group entries according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSMACGroupsTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.15
Table of QoS MACGroups definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSMACGroupsEntry

alaQoSMACGroupsEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.15.1
Definition of QoS MACGroups
OBJECT-TYPE    
  QoSMACGroupsEntry  

alaQoSMACGroupsName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.15.1.1
Name of MAC group
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSMACGroupsSource 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.15.1.2
What entity created the MAC group.
OBJECT-TYPE    
  INTEGER ldap(1), cli(2), blt(3), api(4), imp(5)  

alaQoSMACGroupsStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.15.1.3
Used to create/delete MAC groups according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSAppliedMACGroupsTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.16
Table of QoS AppliedMACGroups definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSAppliedMACGroupsEntry

alaQoSAppliedMACGroupsEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.16.1
Definition of QoS AppliedMACGroups
OBJECT-TYPE    
  QoSAppliedMACGroupsEntry  

alaQoSAppliedMACGroupsName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.16.1.1
Name of MAC group
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedMACGroupsSource 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.16.1.2
What entity created the MAC group.
OBJECT-TYPE    
  INTEGER ldap(1), cli(2), blt(3), api(4), imp(5)  

alaQoSAppliedMACGroupsStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.16.1.3
Used to create/delete MAC groups according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSMACGroupTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.17
Table of QoS MACGroup definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSMACGroupEntry

alaQoSMACGroupEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.17.1
Definition of QoS MACGroup
OBJECT-TYPE    
  QoSMACGroupEntry  

alaQoSMACGroupMacAddr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.17.1.1
MAC address for MAC group entry
OBJECT-TYPE    
  MacAddress  

alaQoSMACGroupMacMask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.17.1.2
MAC mask for MAC group entry
OBJECT-TYPE    
  MacAddress  

alaQoSMACGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.17.1.3
Used to create/delete MAC group entries according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSAppliedMACGroupTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.18
Table of QoS AppliedMACGroup definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSAppliedMACGroupEntry

alaQoSAppliedMACGroupEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.18.1
Definition of QoS AppliedMACGroup
OBJECT-TYPE    
  QoSAppliedMACGroupEntry  

alaQoSAppliedMACGroupMacAddr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.18.1.1
MAC address for MAC group entry
OBJECT-TYPE    
  MacAddress  

alaQoSAppliedMACGroupMacMask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.18.1.2
MAC mask for MAC group entry
OBJECT-TYPE    
  MacAddress  

alaQoSAppliedMACGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.18.1.3
Used to create/delete MAC group entries according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSPortGroupsTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19
Table of QoS PortGroups definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSPortGroupsEntry

alaQoSPortGroupsEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19.1
Definition of QoS PortGroups
OBJECT-TYPE    
  QoSPortGroupsEntry  

alaQoSPortGroupsName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19.1.1
Name of port group
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSPortGroupsSource 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19.1.2
What entity created the port group.
OBJECT-TYPE    
  INTEGER ldap(1), cli(2), blt(3), api(4), imp(5)  

alaQoSPortGroupsStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19.1.3
Used to create/delete port groups according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSAppliedPortGroupsTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20
Table of QoS AppliedPortGroups definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSAppliedPortGroupsEntry

alaQoSAppliedPortGroupsEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20.1
Definition of QoS AppliedPortGroups
OBJECT-TYPE    
  QoSAppliedPortGroupsEntry  

alaQoSAppliedPortGroupsName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20.1.1
Name of port group
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedPortGroupsSource 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20.1.2
What entity created the port group.
OBJECT-TYPE    
  INTEGER ldap(1), cli(2), blt(3), api(4), imp(5)  

alaQoSAppliedPortGroupsStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20.1.3
Used to create/delete port groups according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSPortGroupTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21
Table of QoS PortGroup definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSPortGroupEntry

alaQoSPortGroupEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21.1
Definition of QoS PortGroup
OBJECT-TYPE    
  QoSPortGroupEntry  

alaQoSPortGroupSlot 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21.1.1
Physical slot for port group entry
OBJECT-TYPE    
  Integer32 1..16  

alaQoSPortGroupPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21.1.2
Physical port range start for port group entry
OBJECT-TYPE    
  Integer32 1..52  

alaQoSPortGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21.1.3
Used to create/delete port group entries according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSPortGroupPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21.1.4
Physical port range end for port group entry Must be greater than port range start to indicate a range. When '1', use port as a single port.
OBJECT-TYPE    
  Integer32 0..52  

alaQoSAppliedPortGroupTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22
Table of QoS AppliedPortGroup definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSAppliedPortGroupEntry

alaQoSAppliedPortGroupEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22.1
Definition of QoS AppliedPortGroup
OBJECT-TYPE    
  QoSAppliedPortGroupEntry  

alaQoSAppliedPortGroupSlot 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22.1.1
Physical slot for port group entry
OBJECT-TYPE    
  Integer32 1..16  

alaQoSAppliedPortGroupPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22.1.2
Physical port range start for port group entry
OBJECT-TYPE    
  Integer32 1..52  

alaQoSAppliedPortGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22.1.3
Used to create/delete port group entries according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSAppliedPortGroupPortEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22.1.4
Physical port range end for port group entry Must be greater than port range start to indicate a range. When '1', use port as a single port.
OBJECT-TYPE    
  Integer32 0..52  

alaQoSMapGroupsTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.23
Table of QoS MapGroups definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSMapGroupsEntry

alaQoSMapGroupsEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.23.1
Definition of QoS MapGroups
OBJECT-TYPE    
  QoSMapGroupsEntry  

alaQoSMapGroupsName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.23.1.1
Name of map group
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSMapGroupsSource 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.23.1.2
What entity created the map group.
OBJECT-TYPE    
  INTEGER ldap(1), cli(2), blt(3), api(4), imp(5)  

alaQoSMapGroupsStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.23.1.3
Used to create/delete map groups according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSAppliedMapGroupsTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.24
Table of QoS AppliedMapGroups definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSAppliedMapGroupsEntry

alaQoSAppliedMapGroupsEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.24.1
Definition of QoS AppliedMapGroups
OBJECT-TYPE    
  QoSAppliedMapGroupsEntry  

alaQoSAppliedMapGroupsName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.24.1.1
Name of map group
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedMapGroupsSource 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.24.1.2
What entity created the map group.
OBJECT-TYPE    
  INTEGER ldap(1), cli(2), blt(3), api(4), imp(5)  

alaQoSAppliedMapGroupsStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.24.1.3
Used to create/delete map groups according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSMapGroupTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25
Table of QoS MapGroup definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSMapGroupEntry

alaQoSMapGroupEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25.1
Definition of QoS MapGroup
OBJECT-TYPE    
  QoSMapGroupEntry  

alaQoSMapGroupKey 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25.1.1
Key range start of map group entry.
OBJECT-TYPE    
  Integer32 0..63  

alaQoSMapGroupKeyEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25.1.2
Key range end for map group entries. Key range end must be greater than key range start to indicate a range. When '0', use key range start as a single key.
OBJECT-TYPE    
  Integer32 0..63  

alaQoSMapGroupValue 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25.1.3
Value for map group entries. Value to stamp on traffic when keys in the proper range are seen.
OBJECT-TYPE    
  Integer32 0..63  

alaQoSMapGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25.1.4
Used to create/delete map group entries according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSAppliedMapGroupTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26
Table of QoS AppliedMapGroup definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSAppliedMapGroupEntry

alaQoSAppliedMapGroupEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26.1
Definition of QoS AppliedMapGroup
OBJECT-TYPE    
  QoSAppliedMapGroupEntry  

alaQoSAppliedMapGroupKey 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26.1.1
Key range start of map group entry.
OBJECT-TYPE    
  Integer32 0..63  

alaQoSAppliedMapGroupKeyEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26.1.2
Key range end for map group entries. Key range end must be greater than key range start to indicate a range. When '0', use key range start as a single key.
OBJECT-TYPE    
  Integer32 0..63  

alaQoSAppliedMapGroupValue 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26.1.3
Value for map group entries. Value to stamp on traffic when keys in the proper range are seen.
OBJECT-TYPE    
  Integer32 0..63  

alaQoSAppliedMapGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26.1.4
Used to create/delete map group entries according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSActionTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27
Table of QoS Action definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSActionEntry

alaQoSActionEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1
Definition of QoS Action
OBJECT-TYPE    
  QoSActionEntry  

alaQoSActionName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.1
Name of action
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSActionSource 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.2
What entity created the action.
OBJECT-TYPE    
  INTEGER ldap(1), cli(2), blt(3), api(4), imp(5)  

alaQoSActionDisposition 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.3
Disposition of traffic using the action. Use to filter out unwanted traffic.
OBJECT-TYPE    
  INTEGER accept(1), drop(2), deny(3)  

alaQoSActionDropAlgorithm 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.4
Which drop algorithm should be used to discard traffic when oversubscribed.
OBJECT-TYPE    
  INTEGER tail(1), wred(2)  

alaQoSActionWredMaximumThreshold 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.5
Bandwidth at which WRED should discard most traffic.
OBJECT-TYPE    
  Integer32  

alaQoSActionWredMaximumThresholdStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.6
Status field indicating whether WRED maximum threshold is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionWredMinimumThreshold 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.7
Bandwidth at which WRED should start to discard traffic.
OBJECT-TYPE    
  Integer32  

alaQoSActionWredMinimumThresholdStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.8
Status field indicating whether WRED minimum threshold is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionWredMaximumProbability 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.9
Probabilty that traffic will be dropped at WRED maximum threshold.
OBJECT-TYPE    
  Integer32  

alaQoSActionWredMaximumProbabilityStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.10
Status field indicating whether WRED maximum probability is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionMinimumBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.11
Minimum bandwidth (Kbits/sec) to guarantee for traffic
OBJECT-TYPE    
  Integer32  

alaQoSActionMinimumBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.12
Status field indicating whether minimum bandwidth is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionMaximumBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.13
Maximum bandwidth (Kbits/sec) allowed for traffic
OBJECT-TYPE    
  Integer32  

alaQoSActionMaximumBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.14
Status field indicating whether maximum bandwidth is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionPeakBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.15
Peak bandwidth (Kbits/sec) allowed for traffic
OBJECT-TYPE    
  Integer32  

alaQoSActionPeakBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.16
Status field indicating whether peak bandwidth is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionPriority 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.17
Internal and queueing priority to use for traffic.
OBJECT-TYPE    
  Integer32 0..7  

alaQoSActionPriorityStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.18
Status field indicating whether priority is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionShared 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.19
When enabled, try and share any resources (queues/limiters/descriptors) when more than one policy uses the same action.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSActionJitter 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.20
Maximum jitter to allow for traffic.
OBJECT-TYPE    
  Integer32  

alaQoSActionJitterStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.21
Status field indicating whether jitter is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionLatency 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.22
Maximum latency to allow for traffic.
OBJECT-TYPE    
  Integer32  

alaQoSActionLatencyStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.23
Status field indicating whether latency is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionMaximumDepth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.24
Maximum depth (Kbytes) of queues for traffic. Used for EBS in tri-color marker applications.
OBJECT-TYPE    
  Integer32  

alaQoSActionMaximumDepthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.25
Status field indicating whether maximum depth is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionMaximumBuffers 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.26
Maxmimum buffers for queues for traffic.
OBJECT-TYPE    
  Integer32 0..2047  

alaQoSActionMaximumBuffersStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.27
Status field indicating whether maximum buffers is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAction8021p 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.28
802.1p value to stamp on traffic.
OBJECT-TYPE    
  Integer32 0..7  

alaQoSAction8021pStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.29
Status field indicating whether 802.1p is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionTos 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.30
TOS value to stamp on traffic. (High 3 bits of TOS byte)
OBJECT-TYPE    
  Integer32 0..7  

alaQoSActionTosStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.31
Status field indicating whether TOS is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionDscp 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.32
TOS value to stamp on traffic. (High 6 bits of TOS byte)
OBJECT-TYPE    
  Integer32 0..63  

alaQoSActionDscpStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.33
Status field indicating whether DSCP is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionMapFrom 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.34
What field to use as key for mapping 802.1p/TOS/DSCP priorities
OBJECT-TYPE    
  INTEGER b8021p(1), tos(2), dscp(3)  

alaQoSActionMapTo 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.35
What field to rewrite due to remapping 802.1p/TOS/DSCP priorities
OBJECT-TYPE    
  INTEGER b8021p(1), tos(2), dscp(3)  

alaQoSActionMapGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.36
Name of the map group to use when remapping 802.1p/TOS/DSCP priorities.
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSActionMapGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.37
Status field indicating whether a map group is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionSourceRewriteIpAddr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.38
Source IP address to rewrite on traffic.
OBJECT-TYPE    
  IpAddress  

alaQoSActionSourceRewriteIpAddrStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.39
Status field indicating whether source rewrite IP address & mask is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionSourceRewriteIpMask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.40
Source rewrite IP mask to determine how much of source IP to rewrite.
OBJECT-TYPE    
  IpAddress  

alaQoSActionSourceRewriteNetworkGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.41
Name of network group containing source address/masks to rewrite on traffic. Must be a one to on correspondence with source network group entries in the condition.
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSActionSourceRewriteNetworkGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.42
Status field indicating whether source rewrite network group is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionDestinationRewriteIpAddr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.43
Destination IP address to rewrite on traffic.
OBJECT-TYPE    
  IpAddress  

alaQoSActionDestinationRewriteIpAddrStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.44
Status field indicating whether destination rewrite IP address & mask is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionDestinationRewriteIpMask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.45
Destination rewrite IP mask to determine how much of destination IP to rewrite.
OBJECT-TYPE    
  IpAddress  

alaQoSActionDestinationRewriteNetworkGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.46
Name of network group containing destination address/masks to rewrite on traffic. Must be a one to on correspondence with destination network group entries in the condition.
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSActionDestinationRewriteNetworkGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.47
Status field indicating whether destination rewrite network group is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionLoadBalanceGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.48
Name of load balance group to use for traffic
OBJECT-TYPE    
  DisplayString SIZE(0..23)  

alaQoSActionLoadBalanceGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.49
Status field indicating whether load balanace group is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionPermanentGatewayIpAddr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.50
Next hop gateway to use for traffic
OBJECT-TYPE    
  IpAddress  

alaQoSActionPermanentGatewayIpAddrStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.51
Status field indicating whether permanent gateway IP address is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionAlternateGatewayIpAddr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.52
Next hop gateway to use for traffic that doesn't have an explicit route. Use this gateway instead of default routes.
OBJECT-TYPE    
  IpAddress  

alaQoSActionAlternateGatewayIpAddrStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.53
Status field indicating whether alternate gateway IP address is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionRowStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.54
Used to create/delete actions according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSActionMinimumDepth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.55
Minimum depth (Kbytes) of queues for traffic. Used for CBS in tri-color marker applications.
OBJECT-TYPE    
  Integer32  

alaQoSActionMinimumDepthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.56
Status field indicating whether minimum depth is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionVPNAccess 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.57
How to encrypt traffic
OBJECT-TYPE    
  INTEGER protect(1), bypass(2), drop(3)  

alaQoSActionNocache 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.58
When enabled, don't make hardware entries for matching flows.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSActionPortdisable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.59
When enabled, disable the physical source port of the traffic.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSActionRedirectSlot 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.60
Destination physical slot for redirected traffic
OBJECT-TYPE    
  Integer32 0..16  

alaQoSActionRedirectSlotStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.61
Status for alaQoSActionRedirectSlotStatus field
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionRedirectPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.62
Destination physical port for redirected traffic
OBJECT-TYPE    
  Integer32 1..52  

alaQoSActionRedirectAgg 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.63
Destination linkagg for redirected traffic
OBJECT-TYPE    
  Integer32 0..32  

alaQoSActionRedirectAggStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.64
Status for alaQoSActionRedirectAggStatus field
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionMirrorSlot 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.65
Destination physical slot for mirrored traffic
OBJECT-TYPE    
  Integer32 0..16  

alaQoSActionMirrorPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.66
Destination physical port for mirrored traffic
OBJECT-TYPE    
  Integer32 1..52  

alaQoSActionMirrorMode 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.67
Mirroring mode
OBJECT-TYPE    
  INTEGER ingress(1), egress(2), both(3)  

alaQoSActionMirrorModeStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.68
Status for alaQoSActionMirrorMode field
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionCIR 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.69
Committed Information Rate - bandwidth values in kilobits per second.
OBJECT-TYPE    
  Integer32  

alaQoSActionCIRStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.70
Status field indicating whether CIR value is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionCBS 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.71
Committed Burst Size - bucket size in byte.
OBJECT-TYPE    
  Integer32 0..2147450880  

alaQoSActionCBSStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.72
Status field indicating whether CBS value is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionPIR 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.73
Peak Information Rate - bandwidth values in kilobits per second.
OBJECT-TYPE    
  Integer32  

alaQoSActionPIRStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.74
Status field indicating whether PIR value is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionPBS 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.75
Peak Burst Size - bucket size in byte.
OBJECT-TYPE    
  Integer32 0..2147450880  

alaQoSActionPBSStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.76
Status field indicating whether PBS value is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSActionCounterColor 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.77
Specifies the color mode for the counters which will be used for sr/trTCM.
OBJECT-TYPE    
  INTEGER rednonred(1), greennongreen(2), greenred(3), greenyellow(4), redyellow(5)  

alaQoSAppliedActionTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28
Table of QoS AppliedAction definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSAppliedActionEntry

alaQoSAppliedActionEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1
Definition of QoS AppliedAction
OBJECT-TYPE    
  QoSAppliedActionEntry  

alaQoSAppliedActionName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.1
Name of action
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedActionSource 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.2
What entity created the action.
OBJECT-TYPE    
  INTEGER ldap(1), cli(2), blt(3), api(4), imp(5)  

alaQoSAppliedActionDisposition 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.3
Disposition of traffic using the action. Use to filter out unwanted traffic.
OBJECT-TYPE    
  INTEGER accept(1), drop(2), deny(3)  

alaQoSAppliedActionDropAlgorithm 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.4
Which drop algorithm should be used to discard traffic when oversubscribed.
OBJECT-TYPE    
  INTEGER tail(1), wred(2)  

alaQoSAppliedActionWredMaximumThreshold 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.5
Bandwidth at which WRED should discard most traffic.
OBJECT-TYPE    
  Integer32  

alaQoSAppliedActionWredMaximumThresholdStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.6
Status field indicating whether WRED maximum threshold is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionWredMinimumThreshold 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.7
Bandwidth at which WRED should start to discard traffic.
OBJECT-TYPE    
  Integer32  

alaQoSAppliedActionWredMinimumThresholdStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.8
Status field indicating whether WRED minimum threshold is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionWredMaximumProbability 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.9
Probabilty that traffic will be dropped at WRED maximum threshold.
OBJECT-TYPE    
  Integer32  

alaQoSAppliedActionWredMaximumProbabilityStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.10
Status field indicating whether WRED maximum probability is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionMinimumBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.11
Minimum bandwidth (Kbits/sec) to guarantee for traffic
OBJECT-TYPE    
  Integer32  

alaQoSAppliedActionMinimumBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.12
Status field indicating whether minimum bandwidth is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionMaximumBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.13
Maximum bandwidth (Kbits/sec) allowed for traffic
OBJECT-TYPE    
  Integer32  

alaQoSAppliedActionMaximumBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.14
Status field indicating whether maximum bandwidth is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionPeakBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.15
Peak bandwidth (Kbits/sec) allowed for traffic
OBJECT-TYPE    
  Integer32  

alaQoSAppliedActionPeakBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.16
Status field indicating whether peak bandwidth is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionPriority 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.17
Internal and queueing priority to use for traffic.
OBJECT-TYPE    
  Integer32 0..7  

alaQoSAppliedActionPriorityStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.18
Status field indicating whether priority is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionShared 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.19
When enabled, try and share any resources (queues/limiters/descriptors) when more than one policy uses the same action.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSAppliedActionJitter 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.20
Maximum jitter to allow for traffic.
OBJECT-TYPE    
  Integer32  

alaQoSAppliedActionJitterStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.21
Status field indicating whether jitter is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionLatency 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.22
Maximum latency to allow for traffic.
OBJECT-TYPE    
  Integer32  

alaQoSAppliedActionLatencyStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.23
Status field indicating whether latency is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionMaximumDepth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.24
Maximum depth (Kbytes) of queues for traffic. Used for EBS in tri-color marker applications.
OBJECT-TYPE    
  Integer32  

alaQoSAppliedActionMaximumDepthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.25
Status field indicating whether maximum depth is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionMaximumBuffers 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.26
Maxmimum buffers for queues for traffic.
OBJECT-TYPE    
  Integer32 0..2047  

alaQoSAppliedActionMaximumBuffersStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.27
Status field indicating whether maximum buffers is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedAction8021p 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.28
802.1p value to stamp on traffic.
OBJECT-TYPE    
  Integer32 0..7  

alaQoSAppliedAction8021pStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.29
Status field indicating whether 802.1p is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionTos 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.30
TOS value to stamp on traffic. (High 3 bits of TOS byte)
OBJECT-TYPE    
  Integer32 0..7  

alaQoSAppliedActionTosStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.31
Status field indicating whether TOS is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionDscp 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.32
TOS value to stamp on traffic. (High 6 bits of TOS byte)
OBJECT-TYPE    
  Integer32 0..63  

alaQoSAppliedActionDscpStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.33
Status field indicating whether DSCP is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionMapFrom 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.34
What field to use as key for mapping 802.1p/TOS/DSCP priorities
OBJECT-TYPE    
  INTEGER b8021p(1), tos(2), dscp(3)  

alaQoSAppliedActionMapTo 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.35
What field to rewrite due to remapping 802.1p/TOS/DSCP priorities
OBJECT-TYPE    
  INTEGER b8021p(1), tos(2), dscp(3)  

alaQoSAppliedActionMapGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.36
Name of the map group to use when remapping 802.1p/TOS/DSCP priorities.
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedActionMapGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.37
Status field indicating whether a map group is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionSourceRewriteIpAddr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.38
Source IP address to rewrite on traffic.
OBJECT-TYPE    
  IpAddress  

alaQoSAppliedActionSourceRewriteIpAddrStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.39
Status field indicating whether source rewrite IP address & mask is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionSourceRewriteIpMask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.40
Source rewrite IP mask to determine how much of source IP to rewrite.
OBJECT-TYPE    
  IpAddress  

alaQoSAppliedActionSourceRewriteNetworkGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.41
Name of network group containing source address/masks to rewrite on traffic. Must be a one to on correspondence with source network group entries in the condition.
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedActionSourceRewriteNetworkGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.42
Status field indicating whether source rewrite network group is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionDestinationRewriteIpAddr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.43
Destination IP address to rewrite on traffic.
OBJECT-TYPE    
  IpAddress  

alaQoSAppliedActionDestinationRewriteIpAddrStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.44
Status field indicating whether destination rewrite IP address & mask is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionDestinationRewriteIpMask 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.45
Destination rewrite IP mask to determine how much of destination IP to rewrite.
OBJECT-TYPE    
  IpAddress  

alaQoSAppliedActionDestinationRewriteNetworkGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.46
Name of network group containing destination address/masks to rewrite on traffic. Must be a one to on correspondence with destination network group entries in the condition.
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedActionDestinationRewriteNetworkGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.47
Status field indicating whether destination rewrite network group is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionLoadBalanceGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.48
Name of load balance group to use for traffic
OBJECT-TYPE    
  DisplayString SIZE(0..23)  

alaQoSAppliedActionLoadBalanceGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.49
Status field indicating whether load balanace group is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionPermanentGatewayIpAddr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.50
Next hop gateway to use for traffic
OBJECT-TYPE    
  IpAddress  

alaQoSAppliedActionPermanentGatewayIpAddrStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.51
Status field indicating whether permanent gateway IP address is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionAlternateGatewayIpAddr 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.52
Next hop gateway to use for traffic that doesn't have an explicit route. Use this gateway instead of default routes.
OBJECT-TYPE    
  IpAddress  

alaQoSAppliedActionAlternateGatewayIpAddrStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.53
Status field indicating whether alternate gateway IP address is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionRowStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.54
Used to create/delete actions according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSAppliedActionMinimumDepth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.55
Minimum depth (Kbytes) of queues for traffic. Used for CBS in tri-color marker applications.
OBJECT-TYPE    
  Integer32  

alaQoSAppliedActionMinimumDepthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.56
Status field indicating whether minimum depth is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionVPNAccess 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.57
How to encrypt traffic
OBJECT-TYPE    
  INTEGER protect(1), bypass(2), drop(3)  

alaQoSAppliedActionNocache 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.58
When enabled, don't make hardware entries for matching flows.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSAppliedActionPortdisable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.59
When enabled, disable the physical source port of the traffic.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSAppliedActionRedirectSlot 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.60
Destination physical slot for redirected traffic
OBJECT-TYPE    
  Integer32 0..16  

alaQoSAppliedActionRedirectSlotStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.61
Status for alaQoSAppliedActionRedirectSlotStatus field
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionRedirectPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.62
Destination physical port for redirected traffic
OBJECT-TYPE    
  Integer32 1..52  

alaQoSAppliedActionRedirectAgg 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.63
Destination linkagg for redirected traffic
OBJECT-TYPE    
  Integer32 0..32  

alaQoSAppliedActionRedirectAggStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.64
Status for alaQoSAppliedActionRedirectAggStatus field
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionMirrorSlot 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.65
Destination physical slot for mirrored traffic
OBJECT-TYPE    
  Integer32 0..16  

alaQoSAppliedActionMirrorPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.66
Destination physical port for mirrored traffic
OBJECT-TYPE    
  Integer32 1..52  

alaQoSAppliedActionMirrorMode 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.67
Mirroring mode
OBJECT-TYPE    
  INTEGER ingress(1), egress(2), both(3)  

alaQoSAppliedActionMirrorModeStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.68
Status for alaQoSAppliedActionMirrorMode field
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionCIR 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.69
Committed Information Rate - bandwidth values in kilobits per second.
OBJECT-TYPE    
  Integer32  

alaQoSAppliedActionCIRStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.70
Status field indicating whether CIR value is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionCBS 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.71
Committed Burst Size - bucket size in byte.
OBJECT-TYPE    
  Integer32 0..2147450880  

alaQoSAppliedActionCBSStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.72
Status field indicating whether CBS value is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionPIR 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.73
Peak Information Rate - bandwidth values in kilobits per second.
OBJECT-TYPE    
  Integer32  

alaQoSAppliedActionPIRStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.74
Status field indicating whether PIR value is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionPBS 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.75
Peak Burst Size - bucket size in byte.
OBJECT-TYPE    
  Integer32 0..2147450880  

alaQoSAppliedActionPBSStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.76
Status field indicating whether PBS value is specified(enabled) or not(disabled).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedActionCounterColor 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.77
Specifies the color mode for the counters which will be used for sr/trTCM.
OBJECT-TYPE    
  INTEGER rednonred(1), greennongreen(2), greenred(3), greenyellow(4), redyellow(5)  

alaQoSPortTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29
Table of QoS Port definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSPortEntry

alaQoSPortEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1
Definition of QoS Port
OBJECT-TYPE    
  QoSPortEntry  

alaQoSPortSlot 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.1
Physical slot port resides on
OBJECT-TYPE    
  Integer32 0..16  

alaQoSPortPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.2
Physical port number
OBJECT-TYPE    
  Integer32 0..52  

alaQoSPortEnabled 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.3
Pending QoS enable status for the physical port Does not take effect until an 'Apply' command is issued
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaQoSPortAppliedEnabled 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.4
Current QoS enable status for the physical port
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaQoSPortInterfaceType 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.5
The type of interface QoS matches for this physical port
OBJECT-TYPE    
  INTEGER ethernet(1), wan(2), ethernet10(3), ethernet100(4), ethernet1G(5), ethernet10G(6), aggregate(7)  

alaQoSPortTrusted 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.6
Status of trusting 802.1p/TOS/DSCP values. When trusted, 802.1p/DSCP values in the packet are passed through the switch. When untrusted, 802.1p/DSCP values are set to the port defaults.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSPortDefault8021p 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.7
802.1p priority value to use for untagged frames arriving on the port and tagged frames when the port is untrusted.
OBJECT-TYPE    
  Integer32 0..7  

alaQoSPortDefaultDSCP 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.8
DSCP value to stamp in frames arriving on the port when the port is untrusted
OBJECT-TYPE    
  Integer32 0..63  

alaQoSPortMaximumReservedBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.9
Pending maximum reservable bandwidth on the port. Policies can reserve up to this much bandwidth. Does not take effect until an 'Apply' is issued
OBJECT-TYPE    
  Integer32  

alaQoSPortMaximumReservedBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.10
Pending status field indicating whether to enforce maximum reservable bandwidth on next 'Apply'
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortAppliedMaximumReservedBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.11
Current maximum reservable bandwidth on the port. Policies can reserve up to this much bandwidth.
OBJECT-TYPE    
  Integer32  

alaQoSPortAppliedMaximumReservedBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.12
Current status field indicating whether to enforce maximum reservable bandwidth.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortMaximumSignalledBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.13
Pending maximum signalled bandwidth on the port. Signalling protocols can reserve up to this much bandwidth. Does not take effect until an 'Apply' is issued
OBJECT-TYPE    
  Integer32  

alaQoSPortMaximumSignalledBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.14
Pending status field indicating whether to enforce maximum signalled bandwidth on next 'Apply'
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortAppliedMaximumSignalledBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.15
Current maximum signalled bandwidth on the port. Signalling protocols can reserve up to this much bandwidth.
OBJECT-TYPE    
  Integer32  

alaQoSPortAppliedMaximumSignalledBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.16
Current status field indicating whether to enforce maximum signalled bandwidth.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortDefaultQueues 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.17
Pending number of default queues for the port Overrides any switch-wide default queue setting
OBJECT-TYPE    
  Integer32 8..8  

alaQoSPortAppliedDefaultQueues 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.18
Current number of default queues for the port Overrides any switch-wide default queue setting
OBJECT-TYPE    
  Integer32 8..8  

alaQoSPortMaximumDefaultBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.19
Pending maximum default bandwidth (Kbits/sec). Maximum rate for default queues on this port Does not take effect until an 'Apply' command is issued
OBJECT-TYPE    
  Integer32  

alaQoSPortMaximumDefaultBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.20
Pending status field indicating whether to enforce maximum default bandwidth on next 'Apply'
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortAppliedMaximumDefaultBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.21
Current maximum default bandwidth (Kbits/sec). Maximum rate for default queues this port
OBJECT-TYPE    
  Integer32  

alaQoSPortAppliedMaximumDefaultBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.22
Current status field indicating whether to enforce maximum default bandwidth.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortMaximumDefaultDepth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.23
Pending maximum depth of egress queues (Kbytes). Maximum depth of queues on this port Does not take effect until an 'Apply' command is issued
OBJECT-TYPE    
  Integer32  

alaQoSPortMaximumDefaultDepthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.24
Pending status field indicating whether to enforce maximum depth on next 'Apply'
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortAppliedMaximumDefaultDepth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.25
Current maximum depth of egress queues (Kbytes). Maximum depth of queues on this port
OBJECT-TYPE    
  Integer32  

alaQoSPortAppliedMaximumDefaultDepthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.26
Current status field indicating whether to enforce maximum depth.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortMaximumDefaultBuffers 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.27
Pending maximum buffers for egress queues. Maximum number of buffers for queues on this port Does not take effect until an 'Apply' command is issued
OBJECT-TYPE    
  Integer32  

alaQoSPortMaximumDefaultBuffersStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.28
Pending status field indicating whether to enforce maximum buffers on next 'Apply'
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortAppliedMaximumDefaultBuffers 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.29
Current maximum buffers for egress queues. Maximum number of buffers for queues on this port
OBJECT-TYPE    
  Integer32  

alaQoSPortAppliedMaximumDefaultBuffersStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.30
Current status field indicating whether to enforce maximum buffers.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortReset 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.31
Reset all QoS parameters to default values
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSPortPhysicalBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.32
Physical bandwidth of port (Kbit/sec)
OBJECT-TYPE    
  Integer32  

alaQoSPortReservedBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.33
Bandwidth reserved by policies on port (Kbit/sec)
OBJECT-TYPE    
  Integer32  

alaQoSPortSignalledBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.34
Bandwidth reserved by signalling on port (Kbit/sec)
OBJECT-TYPE    
  Integer32  

alaQoSPortCurrentBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.35
Current measured bandwidth of port (Kbits/sec)
OBJECT-TYPE    
  Integer32  

alaQoSPortDefaultQidLow 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.36
Default low queue ID
OBJECT-TYPE    
  Integer32  

alaQoSPortDefaultQidMedium 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.37
Default medium queue ID
OBJECT-TYPE    
  Integer32  

alaQoSPortDefaultQidHigh 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.38
Default high queue ID
OBJECT-TYPE    
  Integer32  

alaQoSPortDefaultQidUrgent 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.39
Default urgent queue ID
OBJECT-TYPE    
  Integer32  

alaQoSPortFloodQid 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.40
ID of the flood queue
OBJECT-TYPE    
  Integer32  

alaQoSPortQueues 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.41
Number of queues currently on the port
OBJECT-TYPE    
  Integer32  

alaQoSPortQueuesCreated 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.42
Number of queue requests on the port
OBJECT-TYPE    
  Integer32  

alaQoSPortQueuesFailed 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.43
Number of queue requests that failed on the port
OBJECT-TYPE    
  Integer32  

alaQoSPortQueuesPreempted 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.44
Number of queues preempted on the port
OBJECT-TYPE    
  Integer32  

alaQoSPortRowStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.45
Used to create/delete ports according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSPortFirPrio0EnqBytes 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.46
Firenze priority 0 enqueue byte count
OBJECT-TYPE    
  Counter64  

alaQoSPortFirPrio0DeqBytes 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.47
Firenze priority 0 dequeue byte count
OBJECT-TYPE    
  Counter64  

alaQoSPortFirPrio0EnqPkts 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.48
Firenze priority 0 enqueue packet count
OBJECT-TYPE    
  Counter64  

alaQoSPortFirPrio0DeqPkts 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.49
Firenze priority 0 dequeue packet count
OBJECT-TYPE    
  Counter64  

alaQoSPortFirPrio0QidDiscardPkts 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.50
Firenze priority 0 QID discard packet count
OBJECT-TYPE    
  Counter64  

alaQoSPortFirPrio0WredDiscardPkts 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.51
Firenze priority 0 WRED discard packet count
OBJECT-TYPE    
  Counter64  

alaQoSPortFirPrio0OverflowDiscardPkts 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.52
Firenze priority 0 overflow discard packet count
OBJECT-TYPE    
  Counter64  

alaQoSPortFirPrio1EnqBytes 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.53
Firenze priority 1 enqueue byte count
OBJECT-TYPE    
  Counter64  

alaQoSPortFirPrio1DeqBytes 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.54
Firenze priority 1 dequeue byte count
OBJECT-TYPE    
  Counter64  

alaQoSPortFirPrio1EnqPkts 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.55
Firenze priority 1 enqueue packet count
OBJECT-TYPE    
  Counter64  

alaQoSPortFirPrio1DeqPkts 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.56
Firenze priority 1 dequeue packet count
OBJECT-TYPE    
  Counter64  

alaQoSPortFirPrio1QidDiscardPkts 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.57
Firenze priority 1 QID discard packet count
OBJECT-TYPE    
  Counter64  

alaQoSPortFirPrio1WredDiscardPkts 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.58
Firenze priority 1 WRED discard packet count
OBJECT-TYPE    
  Counter64  

alaQoSPortFirPrio1OverflowDiscardPkts 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.59
Firenze priority 1 overflow discard packet count
OBJECT-TYPE    
  Counter64  

alaQoSPortFirPrio2EnqBytes 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.60
Firenze priority 2 enqueue byte count
OBJECT-TYPE    
  Counter64  

alaQoSPortFirPrio2DeqBytes 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.61
Firenze priority 2 dequeue byte count
OBJECT-TYPE    
  Counter64  

alaQoSPortFirPrio2EnqPkts 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.62
Firenze priority 2 enqueue packet count
OBJECT-TYPE    
  Counter64  

alaQoSPortFirPrio2DeqPkts 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.63
Firenze priority 2 dequeue packet count
OBJECT-TYPE    
  Counter64  

alaQoSPortFirPrio2QidDiscardPkts 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.64
Firenze priority 2 QID discard packet count
OBJECT-TYPE    
  Counter64  

alaQoSPortFirPrio2WredDiscardPkts 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.65
Firenze priority 2 WRED discard packet count
OBJECT-TYPE    
  Counter64  

alaQoSPortFirPrio2OverflowDiscardPkts 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.66
Firenze priority 2 overflow discard packet count
OBJECT-TYPE    
  Counter64  

alaQoSPortFirPrio3EnqBytes 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.67
Firenze priority 3 enqueue byte count
OBJECT-TYPE    
  Counter64  

alaQoSPortFirPrio3DeqBytes 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.68
Firenze priority 3 dequeue byte count
OBJECT-TYPE    
  Counter64  

alaQoSPortFirPrio3EnqPkts 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.69
Firenze priority 3 enqueue packet count
OBJECT-TYPE    
  Counter64  

alaQoSPortFirPrio3DeqPkts 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.70
Firenze priority 3 dequeue packet count
OBJECT-TYPE    
  Counter64  

alaQoSPortFirPrio3QidDiscardPkts 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.71
Firenze priority 3 QID discard packet count
OBJECT-TYPE    
  Counter64  

alaQoSPortFirPrio3WredDiscardPkts 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.72
Firenze priority 3 WRED discard packet count
OBJECT-TYPE    
  Counter64  

alaQoSPortFirPrio3OverflowDiscardPkts 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.73
Firenze priority 3 overflow discard packet count
OBJECT-TYPE    
  Counter64  

alaQoSPortDefaultClassification 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.74
Ingress traffic classification parameter for Firenze port What field to interpret as priority for WRED
OBJECT-TYPE    
  INTEGER b8021p(1), tos(2), dscp(3)  

alaQoSPortLowPriorityWeight 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.75
Weight to use for low priority egress queue on fixed queue blades.
OBJECT-TYPE    
  Integer32 0..15  

alaQoSPortMediumPriorityWeight 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.76
Weight to use for medium priority egress queue on fixed queue blades.
OBJECT-TYPE    
  Integer32 0..15  

alaQoSPortHighPriorityWeight 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.77
Weight to use for high priority egress queue on fixed queue blades.
OBJECT-TYPE    
  Integer32 0..15  

alaQoSPortUrgentPriorityWeight 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.78
Weight to use for urgent priority egress queue on fixed queue blades.
OBJECT-TYPE    
  Integer32 0..15  

alaQoSPortMaximumBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.79
Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this port
OBJECT-TYPE    
  Integer32  

alaQoSPortMaximumBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.80
Status field indicating whether to enforce maximum bandwidth on port.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortEnqueuingThresholdP0Lower 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.81
Priority 0 FIFO lower threshold for high density module
OBJECT-TYPE    
  Integer32 0..4095  

alaQoSPortEnqueuingThresholdP0Upper 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.82
Priority 0 FIFO upper threshold for high density module
OBJECT-TYPE    
  Integer32 0..4095  

alaQoSPortEnqueuingThresholdP1Lower 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.83
Priority 1 FIFO lower threshold for high density module
OBJECT-TYPE    
  Integer32 0..4095  

alaQoSPortEnqueuingThresholdP1Upper 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.84
Priority 1 FIFO upper threshold for high density module
OBJECT-TYPE    
  Integer32 0..4095  

alaQoSPortEnqueuingThresholdP2Lower 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.85
Priority 2 FIFO lower threshold for high density module
OBJECT-TYPE    
  Integer32 0..4095  

alaQoSPortEnqueuingThresholdP2Upper 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.86
Priority 2 FIFO upper threshold for high density module
OBJECT-TYPE    
  Integer32 0..4095  

alaQoSPortEnqueuingThresholdP3Lower 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.87
Priority 3 FIFO lower threshold for high density module
OBJECT-TYPE    
  Integer32 0..4095  

alaQoSPortEnqueuingThresholdP3Upper 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.88
Priority 3 FIFO upper threshold for high density module
OBJECT-TYPE    
  Integer32 0..4095  

alaQoSPortEnqueuingThresholdStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.89
Status field indicating whether enqueuing thresholds need to be enforced on high density module.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortHighDensity 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.90
Indicates whether this is a high-density port or not.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSPortServicingMode 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.91
Servicing mode for the port
OBJECT-TYPE    
  INTEGER default(0), strictpriority(1), prioritywrr(2), wrr(3), drr(4)  

alaQoSPortFreeFFPRules 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.92
Number of Free FPP rule entries
OBJECT-TYPE    
  Integer32  

alaQoSPortUsedFFPRules 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.93
Number of Used FPP rule entries
OBJECT-TYPE    
  Integer32  

alaQoSPortFreeFFPMasks 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.94
Number of Free FPP mask entries
OBJECT-TYPE    
  Integer32  

alaQoSPortUsedFFPMasks 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.95
Number of Free FPP mask enries
OBJECT-TYPE    
  Integer32  

alaQoSPortSpoofedCount 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.96
Spoofed packet count
OBJECT-TYPE    
  Integer32  

alaQoSPortNonSpoofedCount 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.97
Non-spoofed packet count
OBJECT-TYPE    
  Integer32  

alaQoSPortQ4PriorityWeight 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.98
Weight to use for cos queue 4.
OBJECT-TYPE    
  Integer32 0..15  

alaQoSPortQ5PriorityWeight 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.99
Weight to use for cos queue 5.
OBJECT-TYPE    
  Integer32 0..15  

alaQoSPortQ6PriorityWeight 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.100
Weight to use for cos queue 6.
OBJECT-TYPE    
  Integer32 0..15  

alaQoSPortQ7PriorityWeight 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.101
Weight to use for cos queue 7.
OBJECT-TYPE    
  Integer32 0..15  

alaQoSPortCOS0MaximumBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.102
Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue
OBJECT-TYPE    
  Integer32  

alaQoSPortCOS0MaximumBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.103
Status field indicating whether to enforce maximum bandwidth on queue.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortCOS1MaximumBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.104
Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue
OBJECT-TYPE    
  Integer32  

alaQoSPortCOS1MaximumBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.105
Status field indicating whether to enforce maximum bandwidth on queue.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortCOS2MaximumBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.106
Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue
OBJECT-TYPE    
  Integer32  

alaQoSPortCOS2MaximumBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.107
Status field indicating whether to enforce maximum bandwidth on queue.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortCOS3MaximumBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.108
Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue
OBJECT-TYPE    
  Integer32  

alaQoSPortCOS3MaximumBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.109
Status field indicating whether to enforce maximum bandwidth on queue.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortCOS4MaximumBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.110
Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue
OBJECT-TYPE    
  Integer32  

alaQoSPortCOS4MaximumBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.111
Status field indicating whether to enforce maximum bandwidth on queue.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortCOS5MaximumBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.112
Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue
OBJECT-TYPE    
  Integer32  

alaQoSPortCOS5MaximumBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.113
Status field indicating whether to enforce maximum bandwidth on queue.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortCOS6MaximumBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.114
Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue
OBJECT-TYPE    
  Integer32  

alaQoSPortCOS6MaximumBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.115
Status field indicating whether to enforce maximum bandwidth on queue.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortCOS7MaximumBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.116
Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue
OBJECT-TYPE    
  Integer32  

alaQoSPortCOS7MaximumBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.117
Status field indicating whether to enforce maximum bandwidth on queue.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortCOS0MinimumBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.118
Minimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue
OBJECT-TYPE    
  Integer32  

alaQoSPortCOS0MinimumBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.119
Status field indicating whether to enforce minimum bandwidth on queue.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortCOS1MinimumBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.120
Minimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue
OBJECT-TYPE    
  Integer32  

alaQoSPortCOS1MinimumBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.121
Status field indicating whether to enforce minimum bandwidth on queue.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortCOS2MinimumBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.122
Minimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue
OBJECT-TYPE    
  Integer32  

alaQoSPortCOS2MinimumBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.123
Status field indicating whether to enforce minimum bandwidth on queue.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortCOS3MinimumBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.124
Minimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue
OBJECT-TYPE    
  Integer32  

alaQoSPortCOS3MinimumBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.125
Status field indicating whether to enforce minimum bandwidth on queue.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortCOS4MinimumBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.126
Minimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue
OBJECT-TYPE    
  Integer32  

alaQoSPortCOS4MinimumBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.127
Status field indicating whether to enforce minimum bandwidth on queue.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortCOS5MinimumBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.128
Minimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue
OBJECT-TYPE    
  Integer32  

alaQoSPortCOS5MinimumBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.129
Status field indicating whether to enforce minimum bandwidth on queue.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortCOS6MinimumBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.130
Minimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue
OBJECT-TYPE    
  Integer32  

alaQoSPortCOS6MinimumBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.131
Status field indicating whether to enforce minimum bandwidth on queue.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortCOS7MinimumBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.132
Minimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue
OBJECT-TYPE    
  Integer32  

alaQoSPortCOS7MinimumBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.133
Status field indicating whether to enforce minimum bandwidth on queue.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortMaximumIngBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.134
Maximum igress bandwidth (Kbits/sec). Maximum rate to recieve traffic in on this port
OBJECT-TYPE    
  Integer32  

alaQoSPortMaximumIngBandwidthStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.135
Status field indicating whether to enforce maximum bandwidth on port.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortDEIMarking 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.136
This object specifies if, in egress traffic, the DEI/CFI bit will be set or not for the traffic which is not conformant to SLA (Yellow color packets). enabled(1) -- the DEI/CFI bit will be set in egress traffic. disabled(2) -- the DEI/CFI bit will not be set in egress traffic.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortMonitor 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.137
This object is used to monitor a slot/port on which user is interested to get the cos egress statistics. enabled(1) -- monitor the slot/port to gather per port cos egress statistics. disabled(2) -- reset the previously monitored slot/port.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSPortDEIMapping 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.138
This object specifies if, in ingress traffic, the DEI/CFI bit will be set or not for the traffic which is not conformant to SLA (Yellow color packets). enabled(1) -- the DEI/CFI bit will be set in ingress traffic. disabled(2) -- the DEI/CFI bit will not be set in ingress traffic.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConfig 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30
OBJECT IDENTIFIER    

alaQoSConfigEnabled 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.1
Is QoS enabled on the switch
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaQoSConfigDefaultQueues 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.2
Pending number of default queues to create for each port. Can be overridden on a port by port basis. Does not take affect until an 'Apply' command is issued.
OBJECT-TYPE    
  Integer32 2..8  

alaQoSConfigAppliedDefaultQueues 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.3
Number of default queues configured at last 'Apply' command.
OBJECT-TYPE    
  Integer32 2..8  

alaQoSConfigTrustPorts 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.4
Flag to indicate whether to trust the 802.1p/TOS values on incoming traffic by default. Can be overridden on a port by port basis.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSConfigFlowTimeout 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.5
Pending flow timeout (seconds). Flows are removed from hardware/software if no traffic is seen for this many seconds. Does not take effect until an 'Apply' command is issued
OBJECT-TYPE    
  Integer32 2..3600  

alaQoSConfigAppliedFlowTimeout 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.6
Current flow timeout (seconds). Flows are removed from hardware/software if no traffic is seen for this many seconds.
OBJECT-TYPE    
  Integer32 2..3600  

alaQoSConfigFragmentTimeout 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.7
Pending fragment timeout (seconds). Packet fragments are remembered for this many seconds. Does not take effect until an 'Apply' command is issued
OBJECT-TYPE    
  Integer32 2..60  

alaQoSConfigAppliedFragmentTimeout 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.8
Current fragment timeout (seconds). Packet fragments are remembered for this many seconds.
OBJECT-TYPE    
  Integer32 2..60  

alaQoSConfigReflexiveTimeout 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.9
Pending reflexive timeout (seconds). Anticipate reverse flows for reflexive and NAT connections for this long until we see a response. Does not take effect until an 'Apply' command is issued
OBJECT-TYPE    
  Integer32 10..3000  

alaQoSConfigAppliedReflfexiveTimeout 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.10
Current reflexive timeout (seconds). Anticipate reverse flows for reflexive and NAT connections for this long until we see a response.
OBJECT-TYPE    
  Integer32 10..3000  

alaQoSConfigNatTimeout 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.11
Pending nat timeout (seconds). Once traffic is seen in both directions for anticipated flows, length of time to remember the flow without seeing traffic in either direction. Does not take effect until an 'Apply' command is issued
OBJECT-TYPE    
  Integer32 10..200000  

alaQoSConfigAppliedNatTimeout 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.12
Current nat timeout (seconds). Once traffic is seen in both directions for anticipated flows, length of time to remember the flow without seeing traffic in either direction.
OBJECT-TYPE    
  Integer32 10..200000  

alaQoSConfigClassifyl3Bridged 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.13
Pending indicator for looking at L3/L4 parameters of bridged traffic. Does not take effect until an 'Apply' command is issued.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSConfigAppliedClassifyl3Bridged 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.14
Current indicator for looking at L3/L4 parameters of bridged traffic.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSConfigClassifyFragments 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.15
Pending indicator for classifying fragmented traffic at L4 Does not take effect until an 'Apply' command is issued
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSConfigAppliedClassifyFragments 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.16
Current indicator for classifying fragmented traffic at L4 Does not take effect until an 'Apply' command is issued
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSConfigDefaultBridgedDisposition 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.17
Pending disposition of bridged traffic that doesn't match a policy. Does not take effect until an 'Apply' command is issued.
OBJECT-TYPE    
  INTEGER accept(1), drop(2), deny(3)  

alaQoSConfigAppliedDefaultBridgedDisposition 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.18
Current disposition of bridged traffic that doesn't match a policy.
OBJECT-TYPE    
  INTEGER accept(1), drop(2), deny(3)  

alaQoSConfigDefaultRoutedDisposition 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.19
Pending disposition of routed traffic that doesn't match a policy. Does not take effect until an 'Apply' command is issued.
OBJECT-TYPE    
  INTEGER accept(1), drop(2), deny(3)  

alaQoSConfigAppliedDefaultRoutedDisposition 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.20
Current disposition of routed traffic that doesn't match a policy
OBJECT-TYPE    
  INTEGER accept(1), drop(2), deny(3)  

alaQoSConfigDefaultMulticastDisposition 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.21
Pending disposition of IGMP requests that don't match a policy Does not take effect until an 'Apply' command is issued
OBJECT-TYPE    
  INTEGER accept(1), drop(2), deny(3)  

alaQoSConfigAppliedDefaultMulticastDisposition 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.22
Current disposition of IGMP requests that don't match a policy
OBJECT-TYPE    
  INTEGER accept(1), drop(2), deny(3)  

alaQoSConfigStatsInterval 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.23
Interval in seconds for how often statistics are updated
OBJECT-TYPE    
  Integer32 10..3600  

alaQoSConfigLogLines 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.24
Number of log lines to maintain in the QoS log
OBJECT-TYPE    
  Integer32 0..1024  

alaQoSConfigLogLevel 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.25
The level of logging desired. The higher the level, the more verbose the logging
OBJECT-TYPE    
  Integer32 2..9  

alaQoSConfigLogConsole 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.26
Whether QoS log events are logged to the console
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSConfigForwardLog 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.27
Whether QoS forwards logging events to PolicyManager
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSConfigClearLog 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.28
Clear the QoS log
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSConfigApply 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.29
Set to apply all pending QoS configuration/policy changes
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSConfigRevert 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.30
Set to revert all pending QoS configuration/policy changes
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSConfigReset 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.31
Set to reset global QoS configuration parameters to their default values
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSConfigStatsReset 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.32
Set to reset global QoS statistics counters
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSConfigFlush 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.33
Flush all pending policy objects
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSConfigDebug 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.34
Possible debug flags for QoS
OBJECT-TYPE    
  Integer32  

alaQoSConfigServicingMode 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.35
Servicing mode for the system
OBJECT-TYPE    
  INTEGER strictpriority(1), prioritywrr(2), wrr(3), drr(4)  

alaQoSConfigLowPriorityWeight 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.36
Weight to use for low priority queue(0) on fixed queue blades
OBJECT-TYPE    
  Integer32 0..15  

alaQoSConfigMediumPriorityWeight 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.37
Weight to use for medium priority queue(1) on fixed queue blades
OBJECT-TYPE    
  Integer32 0..15  

alaQoSConfigHighPriorityWeight 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.38
Weight to use for high priority queue(2) on fixed queue blades
OBJECT-TYPE    
  Integer32 0..15  

alaQoSConfigUrgentPriorityWeight 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.39
Weight to use for urgent priority queue(3) on fixed queue blades
OBJECT-TYPE    
  Integer32 0..15  

alaQoSConfigQ4PriorityWeight 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.40
Weight to use for COS 4 priority queue(4) on fixed queue blades
OBJECT-TYPE    
  Integer32 0..15  

alaQoSConfigQ5PriorityWeight 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.41
Weight to use for COS 5 priority queue(5) on fixed queue blades
OBJECT-TYPE    
  Integer32 0..15  

alaQoSConfigQ6PriorityWeight 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.42
Weight to use for COS 6 priority queue(6) on fixed queue blades
OBJECT-TYPE    
  Integer32 0..15  

alaQoSConfigQ7PriorityWeight 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.43
Weight to use for COS 7 priority queue(7) on fixed queue blades
OBJECT-TYPE    
  Integer32 0..15  

alaQoSConfigUserportFilter 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.44
Events/protocols to filter on a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim = 128 dvmrp = 256 is-is = 512 dnsreply = 1024
OBJECT-TYPE    
  Integer32  

alaQoSConfigAppliedUserportFilter 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.45
Events/protocols to filter on a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim = 128 dvmrp = 256 is-is = 512 dnsreply = 1024
OBJECT-TYPE    
  Integer32  

alaQoSConfigUserportShutdown 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.46
Events/protocols that trigger admin down of a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim = 128 dvmrp = 256 is-is = 512 dnsreply = 1024
OBJECT-TYPE    
  Integer32  

alaQoSConfigAppliedUserportShutdown 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.47
Events/protocols that trigger admin down of a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim = 128 dvmrp = 256 is-is = 512 dnsreply = 1024
OBJECT-TYPE    
  Integer32  

alaQoSConfigAutoNMS 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.48
Flag to indicate whether to Prioritize NMS traffic by default.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSConfigAutoPhones 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.49
Auto configure CSBU Phones pri0-7 - will replace the priority. trusted - will allow priority from the orginator to be used. disable - will unconfigure to feature.
OBJECT-TYPE    
  INTEGER pri0(0), pri1(1), pri2(2), pri3(3), pri4(4), pri5(5), pri6(6), pri7(7), trusted(8), disable(9)  

alaQoSConfigQMPage 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.50
Flag to indicate whether to send back a quarantined page when a client is quarantined but a remediation URL is not specified.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSConfigQMMACGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.51
Group name for quarantine manager quarantined MACs.
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSConfigQMPath 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.52
Default path for remediation server redirect.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

alaQoSConfigDEIMapping 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.53
This object specifies, in ingress traffic, the DEI/CFI bit is mapped or not to internal drop precedence or yellow color. enabled(1) -- the DEI/CFI bit is mapped to internal drop precedence or yellow color if that bit is set. disabled(2) -- the DEI/CFI bit is not mapped to drop precedence or yellow color.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConfigDEIMarking 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.54
This object specifies, in egress traffic, the DEI/CFI bit is mapped or not to internal drop precedence or yellow color. enabled(1) -- the DEI/CFI bit is mapped to internal drop precedence or yellow color if that bit is set. disabled(2) -- the DEI/CFI bit is not mapped to drop precedence or yellow color.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSConfigStatsResetEgress 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.55
Set to reset global Egress QoS statistics counters
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSStats 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31
OBJECT IDENTIFIER    

alaQoSStatsL2Events 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.1
Number of L2 classification events
OBJECT-TYPE    
  Counter32  

alaQoSStatsL2Matches 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.2
Number of L2 classifications matching a policy
OBJECT-TYPE    
  Counter32  

alaQoSStatsL2Drops 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.3
Number of L2 classifications matching a drop policy
OBJECT-TYPE    
  Counter32  

alaQoSStatsL3IngressEvents 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.4
Number of L3/L4 ingress classification events
OBJECT-TYPE    
  Counter32  

alaQoSStatsL3IngressMatches 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.5
Number of L3 ingress classifications matching a policy
OBJECT-TYPE    
  Counter32  

alaQoSStatsL3IngressDrops 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.6
Number of L3 ingress classifications matching a drop policy
OBJECT-TYPE    
  Counter32  

alaQoSStatsL3EgressEvents 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.7
Number of L3/L4 egress classification events
OBJECT-TYPE    
  Counter32  

alaQoSStatsL3EgressMatches 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.8
Number of L3 egress classifications matching a policy
OBJECT-TYPE    
  Counter32  

alaQoSStatsL3EgressDrops 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.9
Number of L3 egress classifications matching a drop policy
OBJECT-TYPE    
  Counter32  

alaQoSStatsMulticastEvents 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.10
Number of IGMP classification events
OBJECT-TYPE    
  Counter32  

alaQoSStatsMulticastMatches 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.11
Number of IGMP classifications matching a policy
OBJECT-TYPE    
  Counter32  

alaQoSStatsMulticastDrops 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.12
Number of IGMP classifications matching a drop policy
OBJECT-TYPE    
  Counter32  

alaQoSStatsFragments 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.13
Number of fragments processed by QoS
OBJECT-TYPE    
  Counter32  

alaQoSStatsBadFragments 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.14
Number of illegal (offset = 1) fragments
OBJECT-TYPE    
  Counter32  

alaQoSStatsUnknownFragments 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.15
Number of out of order fragment pieces
OBJECT-TYPE    
  Counter32  

alaQoSStatsReflexiveFlows 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.16
Number of reflexive flow entries
OBJECT-TYPE    
  Counter32  

alaQoSStatsReflexiveCorrections 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.17
Number of reflexive flow corrections
OBJECT-TYPE    
  Counter32  

alaQoSStatsLoadBalanceFlows 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.18
Number of server load balanced flow entries
OBJECT-TYPE    
  Counter32  

alaQoSStatsClassifierMaxNodes 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.19
Highest number of nodes in classifier tree
OBJECT-TYPE    
  Counter32  

alaQoSStatsClassifierMaxDepth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.20
Length of longest path in classifier tree
OBJECT-TYPE    
  Counter32  

alaQoSStatsFlowLookups 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.21
Number of flow table lookups
OBJECT-TYPE    
  Counter32  

alaQoSStatsFlowHits 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.22
Number of flow table lookup hits
OBJECT-TYPE    
  Counter32  

alaQoSStatsSentNIMessages 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.23
Number of messages sent to NIs
OBJECT-TYPE    
  Counter32  

alaQoSStatsReceivedNIMessages 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.24
Number of messages received from NIs
OBJECT-TYPE    
  Counter32  

alaQoSStatsFailedNIMessages 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.25
Number of failed message attemptes to NIs
OBJECT-TYPE    
  Counter32  

alaQoSStatsSpoofedEvents 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.26
Total Number of spoofed events
OBJECT-TYPE    
  Counter32  

alaQoSStatsNonSpoofedEvents 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.27
Total number of non-spoofed events
OBJECT-TYPE    
  Counter32  

alaQoSStatsDropServicesEvents 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.28
Total number of packets matching the DropServices group
OBJECT-TYPE    
  Counter32  

alaQoSQueueTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32
Table of QoS Queue definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSQueueEntry

alaQoSQueueEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1
Definition of QoS Queue
OBJECT-TYPE    
  QoSQueueEntry  

alaQoSQueueId 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.1
Internal queue identifier
OBJECT-TYPE    
  Integer32  

alaQoSQueueSlot 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.2
Physical slot queue is destined to
OBJECT-TYPE    
  Integer32 0..255  

alaQoSQueuePort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.3
Physical port queue is destined to
OBJECT-TYPE    
  Integer32 0..255  

alaQoSQueuePortId 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.4
Internal global port id of destination port
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSQueueType 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.5
Type of queueing done on this queue
OBJECT-TYPE    
  INTEGER mammoth(1), priority(2), spwrr(3), wrr(4), drr(5)  

alaQoSQueuePriority 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.6
Queueing priority for the queue
OBJECT-TYPE    
  Integer32 0..255  

alaQoSQueueMinimumBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.7
Minimum bandwidth (Kbits/sec) given to the queue
OBJECT-TYPE    
  Integer32  

alaQoSQueueMaximumBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.8
Maximum bandwidth (Kbits/sec) given to the queue
OBJECT-TYPE    
  Integer32  

alaQoSQueueAverageBandwidth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.9
Average measured bandwidth (Kbits/sec) for the queue
OBJECT-TYPE    
  Integer32  

alaQoSQueueMinimumDepth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.10
Minimum depth (Kbytes) of the queue
OBJECT-TYPE    
  Integer32  

alaQoSQueueMaximumDepth 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.11
Maximum depth (Kbytes) of the queue
OBJECT-TYPE    
  Integer32  

alaQoSQueueMaximumBuffers 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.12
Maximum number of buffers for the queue
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSQueue8021p 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.13
802.1p value queue places on traffic
OBJECT-TYPE    
  Integer32 0..255  

alaQoSQueuePacketsSent 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.14
Number of packets sent through the queue
OBJECT-TYPE    
  Integer32  

alaQoSQueuePacketsDropped 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.15
Number of packets dropped trying to queue into this queue
OBJECT-TYPE    
  Integer32  

alaQoSQueueMaxLength 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.16
Maximum measured length the queue has reached in buffers
OBJECT-TYPE    
  Integer32  

alaQoSQueueAverageLength 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.17
Average measured length of the queue in buffers
OBJECT-TYPE    
  Integer32  

alaQoSQueueCurrentLength 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.18
Current measured length of the queue in buffers
OBJECT-TYPE    
  Integer32  

alaQoSQueueAction 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.19
Name of the action this queue was created from
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSSlotTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33
Table of QoS Slot definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSSlotEntry

alaQoSSlotEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1
Definition of QoS Slot
OBJECT-TYPE    
  QoSSlotEntry  

alaQoSSlotSlot 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.1
Physical slot number
OBJECT-TYPE    
  Integer32 1..16  

alaQoSSlotSlice 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.2
Physical device number on slot
OBJECT-TYPE    
  Integer32 0..4  

alaQoSSlotType 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.3
Type of hardware in this slot/slice
OBJECT-TYPE    
  INTEGER mammoth(1), kodiak(2), mailbox(3), coronado(4), ixe2424(5), kite(6), fuji(7)  

alaQoSSlotMaxBuffers 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.4
Maximum total buffers on this slot/slice
OBJECT-TYPE    
  Integer32  

alaQoSSlotFreeBuffers1 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.5
Current free buffers in list 1
OBJECT-TYPE    
  Integer32  

alaQoSSlotFreeBuffers2 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.6
Current free buffers in list 2
OBJECT-TYPE    
  Integer32  

alaQoSSlotThreshold1Low 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.7
Buffer are not given to low priority traffic from list 1 when free buffers in list 1 is less than this threshold.
OBJECT-TYPE    
  Integer32  

alaQoSSlotThreshold1Medium 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.8
Buffer are not given to medium priority traffic from list 1 when free buffers in list 1 is less than this threshold.
OBJECT-TYPE    
  Integer32  

alaQoSSlotThreshold1High 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.9
Buffer are not given to high priority traffic from list 1 when free buffers in list 1 is less than this threshold.
OBJECT-TYPE    
  Integer32  

alaQoSSlotThreshold1Urgent 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.10
Buffer are not given to urgent priority traffic from list 1 when free buffers in list 1 is less than this threshold.
OBJECT-TYPE    
  Integer32  

alaQoSSlotThreshold2Low 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.11
Buffer are not given to low priority traffic from list 2 when free buffers in list 2 is less than this threshold.
OBJECT-TYPE    
  Integer32  

alaQoSSlotThreshold2Medium 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.12
Buffer are not given to medium priority traffic from list 2 when free buffers in list 2 is less than this threshold.
OBJECT-TYPE    
  Integer32  

alaQoSSlotThreshold2High 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.13
Buffer are not given to high priority traffic from list 2 when free buffers in list 2 is less than this threshold.
OBJECT-TYPE    
  Integer32  

alaQoSSlotThreshold2Urgent 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.14
Buffer are not given to urgent priority traffic from list 2 when free buffers in list 2 is less than this threshold.
OBJECT-TYPE    
  Integer32  

alaQoSSlotBuffersDenied 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.15
Buffers denied on this slot
OBJECT-TYPE    
  Integer32  

alaQoSSlotBuffersDeniedAverage 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.16
Average number of denied buffers over time
OBJECT-TYPE    
  Integer32  

alaQoSSlotBuffersDropped 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.17
Buffers dropped on this slot
OBJECT-TYPE    
  Integer32  

alaQoSSlotBuffersDroppedAverage 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.18
Average number of dropped buffers over time
OBJECT-TYPE    
  Integer32  

alaQoSSlotWredThresholdP0Lower 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.19
Priority 0 WRED lower threshold for high density module
OBJECT-TYPE    
  Integer32 0..4095  

alaQoSSlotWredThresholdP0Upper 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.20
Priority 0 WRED upper threshold for high density module
OBJECT-TYPE    
  Integer32 0..4095  

alaQoSSlotWredThresholdP1Lower 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.21
Priority 1 WRED lower threshold for high density module
OBJECT-TYPE    
  Integer32 0..4095  

alaQoSSlotWredThresholdP1Upper 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.22
Priority 1 WRED upper threshold for high density module
OBJECT-TYPE    
  Integer32 0..4095  

alaQoSSlotWredThresholdP2Lower 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.23
Priority 2 WRED lower threshold for high density module
OBJECT-TYPE    
  Integer32 0..4095  

alaQoSSlotWredThresholdP2Upper 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.24
Priority 2 WRED upper threshold for high density module
OBJECT-TYPE    
  Integer32 0..4095  

alaQoSSlotWredThresholdP3Lower 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.25
Priority 3 WRED lower threshold for high density module
OBJECT-TYPE    
  Integer32 0..4095  

alaQoSSlotWredThresholdP3Upper 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.26
Priority 3 WRED upper threshold for high density module
OBJECT-TYPE    
  Integer32 0..4095  

alaQoSSlotWredAverageCounterWeight 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.27
The weight used in the WRED algorithm. It is used as a negative power of 2
OBJECT-TYPE    
  Integer32 0..7  

alaQoSSlotWredThresholdStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.28
Status field indicating whether WRED maximum thresholds are specified(enable) or not(disable).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSSlotCbqThresholdMode 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.29
Servicing mode for the CBQ thresholds for high density modules
OBJECT-TYPE    
  INTEGER prioritywrr(1), wrr(2), strictpriority(3)  

alaQoSSlotCbqThresholdP1 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.30
Priority 1 CBQ threshold for high density module
OBJECT-TYPE    
  Integer32 0..4095  

alaQoSSlotCbqThresholdP2 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.31
Priority 2 CBQ threshold for high density module
OBJECT-TYPE    
  Integer32 0..4095  

alaQoSSlotCbqThresholdP3 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.32
Priority 3 CBQ threshold for high density module
OBJECT-TYPE    
  Integer32 0..4095  

alaQoSSlotHighDensity 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.33
Indicates whether this is a high-density slice or not.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSClassify 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34
OBJECT IDENTIFIER    

alaQoSClassifyClassify 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.1
Which classification routine to run on the sample packet
OBJECT-TYPE    
  INTEGER l2(1), l3(2), multicast(3)  

alaQoSClassifyApplied 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.2
What set of policies QoS uses when testing the classifier. When yes(1) the applied policies are used. When no(2) the pending policies are used.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSClassifySourceSlot 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.3
Source physical slot to submit when testing classifier.
OBJECT-TYPE    
  Integer32 0..16  

alaQoSClassifySourcePort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.4
Source physical port to submit when testing classifier.
OBJECT-TYPE    
  Integer32 0..52  

alaQoSClassifySourceInterfaceType 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.5
Source interface type to submit when testing classifier.
OBJECT-TYPE    
  INTEGER any(0), ethernet(1), wan(2), ethernet10(3), ethernet100(4), ethernet1G(5), ethernet10G(6), aggregate(7)  

alaQoSClassifyDestinationSlot 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.6
Destination physical slot to submit when testing classifier.
OBJECT-TYPE    
  Integer32 0..16  

alaQoSClassifyDestinationPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.7
Destination physical port to submit when testing classifier.
OBJECT-TYPE    
  Integer32 0..52  

alaQoSClassifyDestinationInterfaceType 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.8
Destination interface type to submit when testing classifier.
OBJECT-TYPE    
  INTEGER any(0), ethernet(1), wan(2), ethernet10(3), ethernet100(4), ethernet1G(5), ethernet10G(6), aggregate(7)  

alaQoSClassifySourceMac 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.9
Source MAC address to submit when testing classifier.
OBJECT-TYPE    
  MacAddress  

alaQoSClassifyDestinationMac 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.10
Destination MAC address to submit when testing classifier.
OBJECT-TYPE    
  MacAddress  

alaQoSClassifySourceVlan 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.11
Source VLAN to submit when testing classifier.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSClassifyDestinationVlan 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.12
Destination VLAN to submit when testing classifier.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSClassify8021p 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.13
802.1p value to submit when testing classifier.
OBJECT-TYPE    
  Integer32 0..7  

alaQoSClassifySourceIp 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.14
Source IP address to submit when testing classifier.
OBJECT-TYPE    
  IpAddress  

alaQoSClassifyDestinationIp 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.15
Destination IP address to submit when testing classifier.
OBJECT-TYPE    
  IpAddress  

alaQoSClassifyMulticastIp 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.16
Multicast IP address to submit when testing classifier.
OBJECT-TYPE    
  IpAddress  

alaQoSClassifyTos 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.17
TOS value to submit when testing classifier.
OBJECT-TYPE    
  Integer32 0..7  

alaQoSClassifyDscp 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.18
DSCP value to submit when testing classifier.
OBJECT-TYPE    
  Integer32 0..63  

alaQoSClassifyIpProtocol 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.19
IP protocol value to submit when testing classifier.
OBJECT-TYPE    
  Integer32 0..255  

alaQoSClassifySourceIpPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.20
Source IP port to submit when testing classifier.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSClassifyDestinationIpPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.21
Destination IP port to submit when testing classifier.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSClassifyExecute 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.22
Writing to this field tells QoS to run the classifier on the current packet headers. The classifier stores the results in result fields. The next 'set' to the table will clear all fields before actually performing the set.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSClassifyL2SourceResultRule 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.23
Matching rule for L2 (source)
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSClassifyL2SourceResultDisposition 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.24
Result disposition for L2 (source)
OBJECT-TYPE    
  INTEGER accept(1), drop(2), deny(3)  

alaQoSClassifyL2DestinationResultRule 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.25
Matching rule for L2 (destination)
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSClassifyL2DestinationResultDisposition 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.26
Result disposition for L2 (destination)
OBJECT-TYPE    
  INTEGER accept(1), drop(2), deny(3)  

alaQoSClassifyL3ResultRule 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.27
Matching rule for L3
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSClassifyL3ResultDisposition 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.28
Result disposition for L3
OBJECT-TYPE    
  INTEGER accept(1), drop(2), deny(3)  

alaQoSClassifyIGMPResultRule 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.29
Matching rule for IGMP request
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSClassifyIGMPResultDisposition 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.30
Result disposition for IGMP
OBJECT-TYPE    
  INTEGER accept(1), drop(2), deny(3)  

alaQoSClassifyMulticastResultRule 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.31
Matching rule for multicast
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSClassifyMulticastResultDisposition 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.32
Result disposition for multicast
OBJECT-TYPE    
  INTEGER accept(1), drop(2), deny(3)  

alaQoSSlotProtocolTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35
Table of QoS SlotProtocol definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSSlotProtocolEntry

alaQoSSlotProtocolEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1
Definition of QoS SlotProtocol
OBJECT-TYPE    
  QoSSlotProtocolEntry  

alaQoSSlotProtocolId 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.1
Used on high density module classification in the MAC. This is the protocol ID used between the CAM and priority descriptors.
OBJECT-TYPE    
  INTEGER user1(1), user2(2), user3(3), user4(4), unknown(5)  

alaQoSSlotProtocolEthertype 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.2
Used on high density module classification in the MAC. This is the Ethernet type used between the CAM for classification.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSSlotProtocolDsap 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.3
Used on high density module classification in the MAC. This is the destination SAP in an 802.3 packet.
OBJECT-TYPE    
  Integer32 0..255  

alaQoSSlotProtocolSsap 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.4
Used on high density module classification in the MAC. This is the source SAP in an 802.3 packet.
OBJECT-TYPE    
  Integer32 0..255  

alaQoSSlotProtocol8023Enabled 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.5
Used on high density module classification in the MAC. This will enable 802.3 checking on the CAM entry.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaQoSSlotProtocolType 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.6
Used on high density module classification in the MAC. This positions the CAM entry in the list. Priority will put the entries in the front of the CAM, giving it priority. fallback will put the entry at the end.
OBJECT-TYPE    
  INTEGER priority(1), fallback(2)  

alaQoSSlotProtocolRowStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.7
Used to create/delete slot protoocols according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSPortProtocolTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36
Table of QoS PortProtocol definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSPortProtocolEntry

alaQoSPortProtocolEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1
Definition of QoS PortProtocol
OBJECT-TYPE    
  QoSPortProtocolEntry  

alaQoSPortProtocolId 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.1
Used on high density module classification in the MAC. This is the protocol id that needs to be changed.
OBJECT-TYPE    
  INTEGER bpdu(1), lcpsnap(2), lcpeth(3), ipv4(4), arp(5), rarp(6), ipv6(7), ipx(8), apple(9), sna(10), decnet(11), user1(12), user2(13), user3(14), user4(15)  

alaQoSPortProtocolClassification 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.2
Used on high density module classification in the MAC. This determines what type of classification is used to find priority.
OBJECT-TYPE    
  INTEGER b8021p(1), tos(2), dscp(3)  

alaQoSPortProtocolPriorityP0 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.3
Used on high density module classification in the MAC. This is the new priority for P0 to be mapped to.
OBJECT-TYPE    
  Integer32 0..3  

alaQoSPortProtocolPriorityP1 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.4
Used on high density module classification in the MAC. This is the new priority for P1 to be mapped to.
OBJECT-TYPE    
  Integer32 0..3  

alaQoSPortProtocolPriorityP2 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.5
Used on high density module classification in the MAC. This is the new priority for P2 to be mapped to.
OBJECT-TYPE    
  Integer32 0..3  

alaQoSPortProtocolPriorityP3 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.6
Used on high density module classification in the MAC. This is the new priority for P3 to be mapped to.
OBJECT-TYPE    
  Integer32 0..3  

alaQoSPortProtocolPriorityP4 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.7
Used on high density module classification in the MAC. This is the new priority for P4 to be mapped to.
OBJECT-TYPE    
  Integer32 0..3  

alaQoSPortProtocolPriorityP5 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.8
Used on high density module classification in the MAC. This is the new priority for P5 to be mapped to.
OBJECT-TYPE    
  Integer32 0..3  

alaQoSPortProtocolPriorityP6 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.9
Used on high density module classification in the MAC. This is the new priority for P6 to be mapped to.
OBJECT-TYPE    
  Integer32 0..3  

alaQoSPortProtocolPriorityP7 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.10
Used on high density module classification in the MAC. This is the new priority for P7 to be mapped to.
OBJECT-TYPE    
  Integer32 0..3  

alaQoSPortProtocolRowStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.11
Used to create/delete rows according to RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSSlotDscpTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.37
Table of QoS SlotDscp definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSSlotDscpEntry

alaQoSSlotDscpEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.37.1
Definition of QoS SlotDscp
OBJECT-TYPE    
  QoSSlotDscpEntry  

alaQoSSlotDscpIndex 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.37.1.1
Used on high density module classification in the MAC This is the index into the DSCP table to access.
OBJECT-TYPE    
  Integer32 0..63  

alaQoSSlotDscpPriority 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.37.1.2
Used on high density module classification in the MAC. This is the priority of the index of the DSCP table.
OBJECT-TYPE    
  Integer32 0..3  

alaQoSSlotPcamTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38
Table of QoS SlotPcam definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSSlotPcamEntry

alaQoSSlotPcamEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1
Definition of QoS SlotPcam
OBJECT-TYPE    
  QoSSlotPcamEntry  

alaQoSSlotPcamId 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.1
Used on high density module classification in the MAC. This is the index used in the PCAM.
OBJECT-TYPE    
  Integer32 0..24  

alaQoSSlotPcamEthertype 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.2
Used on high density module classification in the MAC. This is the Ethernet type in the CAM.
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSSlotPcamDsap 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.3
Used on high density module classification in the MAC. This is the destination SAP in an 802.3 packet.
OBJECT-TYPE    
  Integer32 0..255  

alaQoSSlotPcamSsap 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.4
Used on high density module classification in the MAC. This is the source SAP in an 802.3 packet.
OBJECT-TYPE    
  Integer32 0..255  

alaQoSSlotPcam8023Enabled 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.5
Used on high density module classification in the MAC. This will enable 802.3 checking on the CAM entry.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSSlotPcamProtocolNumber 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.6
Used on high density module classification in the MAC. This identifies the protocol number of the CAM entry.
OBJECT-TYPE    
  Integer32 0..255  

alaQoSSlotPcamEnableEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.7
Used on high density module to enable the pcam entry.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSSlotPcamEnable8023 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.8
Used on high density module to indiciate if 802.3 is enabled in the pcam entry.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSSlotPcamEnableDsap 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.9
Used on high density module to indiciate if DSAP is enabled in the pcam entry.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSSlotPcamEnableSsap 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.10
Used on high density module to indiciate if SSAP is enabled in the pcam entry.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSSlotPcamEnableEthertype 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.11
Used on high density module to indiciate if Ethertype is enabled in the pcam entry.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alaQoSPortPdiTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39
Table of QoS PortPdi definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSPortPdiEntry

alaQoSPortPdiEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1
Definition of QoS PortPdi
OBJECT-TYPE    
  QoSPortPdiEntry  

alaQoSPortPdiId 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.1
Used on high density module classification in the MAC. This is the index used in the PDI.
OBJECT-TYPE    
  Integer32 0..16  

alaQoSPortPdiPriorityType 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.2
Used on high density module classification in the MAC. This is the classification type on the port.
OBJECT-TYPE    
  Integer32 0..255  

alaQoSPortPdiPriorityP0 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.3
Used on high density module classification in the MAC. This is the internal priority mapping for a P0 packet.
OBJECT-TYPE    
  Integer32 0..255  

alaQoSPortPdiPriorityP1 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.4
Used on high density module classification in the MAC. This is the internal priority mapping for a P1 packet.
OBJECT-TYPE    
  Integer32 0..255  

alaQoSPortPdiPriorityP2 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.5
Used on high density module classification in the MAC. This is the internal priority mapping for a P2 packet.
OBJECT-TYPE    
  Integer32 0..255  

alaQoSPortPdiPriorityP3 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.6
Used on high density module classification in the MAC. This is the internal priority mapping for a P3 packet.
OBJECT-TYPE    
  Integer32 0..255  

alaQoSPortPdiPriorityP4 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.7
Used on high density module classification in the MAC. This is the internal priority mapping for a P4 packet.
OBJECT-TYPE    
  Integer32 0..255  

alaQoSPortPdiPriorityP5 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.8
Used on high density module classification in the MAC. This is the internal priority mapping for a P5 packet.
OBJECT-TYPE    
  Integer32 0..255  

alaQoSPortPdiPriorityP6 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.9
Used on high density module classification in the MAC. This is the internal priority mapping for a P6 packet.
OBJECT-TYPE    
  Integer32 0..255  

alaQoSPortPdiPriorityP7 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.10
Used on high density module classification in the MAC. This is the internal priority mapping for a P7 packet.
OBJECT-TYPE    
  Integer32 0..255  

alaQoSValidityPeriodTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40
Table of QoS ValidityPeriod definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSValidityPeriodEntry

alaQoSValidityPeriodEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1
Definition of QoS ValidityPeriod
OBJECT-TYPE    
  QoSValidityPeriodEntry  

alaQoSValidityPeriodName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.1
Name of validity period
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSValidityPeriodSource 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.2
What entity created the validity period.
OBJECT-TYPE    
  INTEGER ldap(1), cli(2), blt(3), api(4), imp(5)  

alaQoSValidityPeriodDays 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.3
Bitfield for each day of the week this validity period is active. Monday is least significant, Sunday is most significant.
OBJECT-TYPE    
  Integer32  

alaQoSValidityPeriodDaysStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.4
Status field indicating whether the validity period has specific active days of the month.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSValidityPeriodMonths 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.5
Bitfield for each month this validity period is active. January is least significant. Decemeber is most significant.
OBJECT-TYPE    
  Integer32  

alaQoSValidityPeriodMonthsStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.6
Status field indicating whether the validity period has specific active days of the week.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSValidityPeriodHour 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.7
Time of day this period becomes active. Format is 'hh:mm'
OBJECT-TYPE    
  DisplayString SIZE(0..7)  

alaQoSValidityPeriodHourStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.8
Status field indicating whether the validity period has specific active hours of the day.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSValidityPeriodEndHour 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.9
Time of day this period becomes inactive. Format is 'hh:mm'
OBJECT-TYPE    
  DisplayString SIZE(0..7)  

alaQoSValidityPeriodInterval 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.10
Date/time when the validity period begins. Format is 'mm/dd/yyyy hh:mm'
OBJECT-TYPE    
  DisplayString SIZE(0..19)  

alaQoSValidityPeriodIntervalStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.11
Status field indicating whether the validity period has a specific active date-time interval.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSValidityPeriodEndInterval 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.12
Date/time when the validity period ends. Format is 'mm/dd/yyyy hh:mm'
OBJECT-TYPE    
  DisplayString SIZE(0..19)  

alaQoSValidityPeriodRowStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.13
Used to create/delete validity periods according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSAppliedValidityPeriodTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41
Table of QoS AppliedValidityPeriod definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSAppliedValidityPeriodEntry

alaQoSAppliedValidityPeriodEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1
Definition of QoS AppliedValidityPeriod
OBJECT-TYPE    
  QoSAppliedValidityPeriodEntry  

alaQoSAppliedValidityPeriodName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.1
Name of validity period
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedValidityPeriodSource 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.2
What entity created the validity period.
OBJECT-TYPE    
  INTEGER ldap(1), cli(2), blt(3), api(4), imp(5)  

alaQoSAppliedValidityPeriodDays 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.3
Bitfield for each day of the week this validity period is active. Monday is least significant, Sunday is most significant.
OBJECT-TYPE    
  Integer32  

alaQoSAppliedValidityPeriodDaysStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.4
Status field indicating whether the validity period has specific active days of the month.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedValidityPeriodMonths 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.5
Bitfield for each month this validity period is active. January is least significant. Decemeber is most significant.
OBJECT-TYPE    
  Integer32  

alaQoSAppliedValidityPeriodMonthsStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.6
Status field indicating whether the validity period has specific active days of the week.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedValidityPeriodHour 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.7
Time of day this period becomes active. Format is 'hh:mm'
OBJECT-TYPE    
  DisplayString SIZE(0..7)  

alaQoSAppliedValidityPeriodHourStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.8
Status field indicating whether the validity period has specific active hours of the day.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedValidityPeriodEndHour 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.9
Time of day this period becomes inactive. Format is 'hh:mm'
OBJECT-TYPE    
  DisplayString SIZE(0..7)  

alaQoSAppliedValidityPeriodInterval 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.10
Date/time when the validity period begins. Format is 'mm/dd/yyyy hh:mm'
OBJECT-TYPE    
  DisplayString SIZE(0..19)  

alaQoSAppliedValidityPeriodIntervalStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.11
Status field indicating whether the validity period has a specific active date-time interval.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaQoSAppliedValidityPeriodEndInterval 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.12
Date/time when the validity period ends. Format is 'mm/dd/yyyy hh:mm'
OBJECT-TYPE    
  DisplayString SIZE(0..19)  

alaQoSAppliedValidityPeriodRowStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.13
Used to create/delete validity periods according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSImportTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42
Table of QoS Import definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSImportEntry

alaQoSImportEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1
Definition of QoS Import
OBJECT-TYPE    
  QoSImportEntry  

alaQoSImportIndex 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.1
Index of entry in import list
OBJECT-TYPE    
  Integer32  

alaQoSImportText 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.2
Text or filename to import
OBJECT-TYPE    
  DisplayString SIZE(0..63)  

alaQoSImportPrecedence 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.3
Precedence to use for policies imported from file
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSImportPrefix 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.4
Prefix for policy names that are imported
OBJECT-TYPE    
  DisplayString SIZE(0..11)  

alaQoSImportSlot 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.5
Slot on which to apply imported policy(s)
OBJECT-TYPE    
  Integer32 0..52  

alaQoSImportPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.6
Starting port on which to apply imported policy(s)
OBJECT-TYPE    
  Integer32 0..16  

alaQoSImportPortend 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.7
Ending port on which to apply imported policy(s)
OBJECT-TYPE    
  Integer32 0..16  

alaQoSImportPortgroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.8
Portgroup on which to apply imported policy(s)
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSImportRowStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.9
Used to create/delete imports according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSAppliedImportTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43
Table of QoS AppliedImport definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSAppliedImportEntry

alaQoSAppliedImportEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1
Definition of QoS AppliedImport
OBJECT-TYPE    
  QoSAppliedImportEntry  

alaQoSAppliedImportIndex 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.1
Index of entry in import list
OBJECT-TYPE    
  Integer32  

alaQoSAppliedImportText 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.2
Text or filename to import
OBJECT-TYPE    
  DisplayString SIZE(0..63)  

alaQoSAppliedImportPrecedence 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.3
Precedence to use for policies imported from file
OBJECT-TYPE    
  Integer32 0..65535  

alaQoSAppliedImportPrefix 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.4
Prefix for policy names that are imported
OBJECT-TYPE    
  DisplayString SIZE(0..11)  

alaQoSAppliedImportSlot 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.5
Slot on which to apply imported policy(s)
OBJECT-TYPE    
  Integer32 0..52  

alaQoSAppliedImportPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.6
Starting port on which to apply imported policy(s)
OBJECT-TYPE    
  Integer32 0..16  

alaQoSAppliedImportPortend 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.7
Ending port on which to apply imported policy(s)
OBJECT-TYPE    
  Integer32 0..16  

alaQoSAppliedImportPortgroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.8
Portgroup on which to apply imported policy(s)
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedImportRowStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.9
Used to create/delete imports according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSRuleGroupsTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44
Table of QoS RuleGroups definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSRuleGroupsEntry

alaQoSRuleGroupsEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1
Definition of QoS RuleGroups
OBJECT-TYPE    
  QoSRuleGroupsEntry  

alaQoSRuleGroupsName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1.1
Name of rule group
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSRuleGroupsSource 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1.2
What entity created the rule group.
OBJECT-TYPE    
  INTEGER ldap(1), cli(2), blt(3), api(4), imp(5)  

alaQoSRuleGroupsType 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1.3
Type of rule group.
OBJECT-TYPE    
  INTEGER default(1), unp(2), vrf(3), ingress(4), egress(5), slb(6)  

alaQoSRuleGroupsEnabled 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1.4
Is this rule grop enabled or not
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaQoSRuleGroupsStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1.5
Used to create/delete rule groups according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSAppliedRuleGroupsTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45
Table of QoS AppliedRuleGroups definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSAppliedRuleGroupsEntry

alaQoSAppliedRuleGroupsEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1
Definition of QoS AppliedRuleGroups
OBJECT-TYPE    
  QoSAppliedRuleGroupsEntry  

alaQoSAppliedRuleGroupsName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1.1
Name of rule group
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedRuleGroupsSource 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1.2
What entity created the service group.
OBJECT-TYPE    
  INTEGER ldap(1), cli(2), blt(3), api(4), imp(5)  

alaQoSAppliedRuleGroupsType 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1.3
What entity created the rule group.
OBJECT-TYPE    
  INTEGER defualt(1), unp(2), vrf(3), ingress(4), egress(5), slb(6)  

alaQoSAppliedRuleGroupsEnabled 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1.4
Is this rule grop enabled or not
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaQoSAppliedRuleGroupsStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1.5
Used to create/delete rule groups according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSRuleGroupTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46
Table of QoS RuleGroup definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSRuleGroupEntry

alaQoSRuleGroupEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1
Definition of QoS RuleGroup
OBJECT-TYPE    
  QoSRuleGroupEntry  

alaQoSRuleGroupRuleName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.1
Name of rule in rule group entry
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSRuleGroupMatches 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.2
Number of times this rule has been matched.
OBJECT-TYPE    
  Counter32  

alaQoSRuleGroupCountType 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.3
Which rule statistics counters to update if not all are available
OBJECT-TYPE    
  INTEGER packets(1), bytes(2)  

alaQoSRuleGroupPacketCount 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.4
Counter for packets patching this rule
OBJECT-TYPE    
  Counter64  

alaQoSRuleGroupByteCount 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.5
Counter for bytes matching this rule
OBJECT-TYPE    
  Counter64  

alaQoSRuleGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.6
Used to create/delete rule group entries according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSAppliedRuleGroupTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47
Table of QoS AppliedRuleGroup definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSAppliedRuleGroupEntry

alaQoSAppliedRuleGroupEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1
Definition of QoS AppliedRuleGroup
OBJECT-TYPE    
  QoSAppliedRuleGroupEntry  

alaQoSAppliedRuleGroupRuleName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.1
Name of rule in rule group entry
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedRuleGroupMatches 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.2
Number of times this rule has been matched.
OBJECT-TYPE    
  Counter32  

alaQoSAppliedRuleGroupCountType 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.3
Which rule statistics counters to update if not all are available
OBJECT-TYPE    
  INTEGER packets(1), bytes(2)  

alaQoSAppliedRuleGroupPacketCount 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.4
Counter for packets patching this rule
OBJECT-TYPE    
  Counter64  

alaQoSAppliedRuleGroupByteCount 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.5
Counter for bytes matching this rule
OBJECT-TYPE    
  Counter64  

alaQoSAppliedRuleGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.6
Used to create/delete rule group entries according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSVlanGroupsTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.48
Table of QoS Vlan Groups definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSVlanGroupsEntry

alaQoSVlanGroupsEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.48.1
Definition of QoS Vlan Groups
OBJECT-TYPE    
  QoSVlanGroupsEntry  

alaQoSVlanGroupsName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.48.1.1
Name of Vlan group
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSVlanGroupsSource 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.48.1.2
What entity created the Vlan group.
OBJECT-TYPE    
  INTEGER ldap(1), cli(2), blt(3), api(4), imp(5)  

alaQoSVlanGroupsStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.48.1.3
Used to create/delete Vlan groups according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSAppliedVlanGroupsTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.49
Table of QoS Applied Vlan Groups definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSAppliedVlanGroupsEntry

alaQoSAppliedVlanGroupsEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.49.1
Definition of QoS Applied Vlan Groups
OBJECT-TYPE    
  QoSAppliedVlanGroupsEntry  

alaQoSAppliedVlanGroupsName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.49.1.1
Name of Applied Vlan group
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

alaQoSAppliedVlanGroupsSource 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.49.1.2
What entity created the Vlan group.
OBJECT-TYPE    
  INTEGER ldap(1), cli(2), blt(3), api(4), imp(5)  

alaQoSAppliedVlanGroupsStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.49.1.3
Used to create/delete Vlan groups according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSVlanGroupTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.50
Table of QoS Vlan Group definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSVlanGroupEntry

alaQoSVlanGroupEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.50.1
Definition of QoS Vlan Group
OBJECT-TYPE    
  QoSVlanGroupEntry  

alaQoSVlanGroupVlan 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.50.1.1
Vlan range start for vlan group entry
OBJECT-TYPE    
  Integer32 1..16  

alaQoSVlanGroupVlanEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.50.1.2
Vlan range end for vlan group entry
OBJECT-TYPE    
  Integer32 1..16  

alaQoSVlanGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.50.1.3
Used to create/delete vlan group entries according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSAppliedVlanGroupTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.51
Table of QoS Applied Vlan Group definitions
OBJECT-TYPE    
  SEQUENCE OF  
    QoSAppliedVlanGroupEntry

alaQoSAppliedVlanGroupEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.51.1
Definition of QoS Applied Vlan Group
OBJECT-TYPE    
  QoSAppliedVlanGroupEntry  

alaQoSAppliedVlanGroupVlan 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.51.1.1
Vlan range start for vlan group entry
OBJECT-TYPE    
  Integer32 1..4095  

alaQoSAppliedVlanGroupVlanEnd 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.51.1.2
Vlan range end for vlan group entry
OBJECT-TYPE    
  Integer32 1..4095  

alaQoSAppliedVlanGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.51.1.3
Used to create/delete vlan group entries according to the RowStatus convention
OBJECT-TYPE    
  RowStatus  

alaQoSHwLoopbackProfileTable 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52
Table of QoS Hw Loopback Profiles
OBJECT-TYPE    
  SEQUENCE OF  
    QoSHwLoopbackProfileEntry

alaQoSHwLoopbackProfileEntry 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1
Definition of QoS Hw Loopback Profiles
OBJECT-TYPE    
  QoSHwLoopbackProfileEntry  

alaQoSHwLoopbackProfileName 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.1
Name of Profile Name
OBJECT-TYPE    
  DisplayString SIZE(1..31)  

alaQoSHwLoopbackSourceMac 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.2
Source MAC address to use for Hardware Loopback profile configuration
OBJECT-TYPE    
  MacAddress  

alaQoSHwLoopbackDestinationMac 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.3
Destination MAC address to use for Hardware Loopback profile configuration
OBJECT-TYPE    
  MacAddress  

alaQoSHwLoopbackVlan 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.4
Vlan used in Hardware Loopback Profile Config
OBJECT-TYPE    
  Integer32 1..4094  

alaQoSHwLoopbackPort 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.5
Loopback Port ifindex used in Hardware Loopback Profile Config
OBJECT-TYPE    
  InterfaceIndex  

alaQoSHwLoopbackType 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.6
The type of Hardware Profile Config, inward and outward
OBJECT-TYPE    
  INTEGER inward(1), outward(2)  

alaQoSHwLoopbackProfileStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.7
The status of the Hardware Profile Config
OBJECT-TYPE    
  INTEGER config(0), start(1), stop(2)  

alaQoSHwLoopbackProfileRowStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.8
Used to create/delete the Profile Config
OBJECT-TYPE    
  RowStatus  

alaQoSMIBConformance 1.3.6.1.4.1.6486.800.1.2.1.22.1.2
Branch for QoS Managed Conformance Information.
OBJECT-IDENTITY    

alaQoSMIBGroups 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1
Branch for QoS Units of Conformance.
OBJECT-IDENTITY    

alaQoSMIBRuleObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.1
Collections of objects providing information for Rules
OBJECT-GROUP    

alaQoSMIBAppliedRuleObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.2
Collections of objects providing information for applied Rules
OBJECT-GROUP    

alaQoSMIBConditionObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.3
Collections of objects providing information for Conditions
OBJECT-GROUP    

alaQoSMIBAppliedConditionObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.4
Collections of objects providing information for applied Conditions
OBJECT-GROUP    

alaQoSMIBServiceObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.5
Collections of objects providing information for Services
OBJECT-GROUP    

alaQoSMIBAppliedServiceObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.6
Collections of objects providing information for applied Services
OBJECT-GROUP    

alaQoSMIBServiceGroupsObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.7
Collections of objects providing information for ServiceGroupss
OBJECT-GROUP    

alaQoSMIBAppliedServiceGroupsObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.8
Collections of objects providing information for applied ServiceGroupss
OBJECT-GROUP    

alaQoSMIBServiceGroupObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.9
Collections of objects providing information for ServiceGroups
OBJECT-GROUP    

alaQoSMIBAppliedServiceGroupObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.10
Collections of objects providing information for applied ServiceGroups
OBJECT-GROUP    

alaQoSMIBNetworkGroupsObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.11
Collections of objects providing information for NetworkGroupss
OBJECT-GROUP    

alaQoSMIBAppliedNetworkGroupsObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.12
Collections of objects providing information for applied NetworkGroupss
OBJECT-GROUP    

alaQoSMIBNetworkGroupObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.13
Collections of objects providing information for NetworkGroups
OBJECT-GROUP    

alaQoSMIBAppliedNetworkGroupObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.14
Collections of objects providing information for applied NetworkGroups
OBJECT-GROUP    

alaQoSMIBMACGroupsObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.15
Collections of objects providing information for MACGroupss
OBJECT-GROUP    

alaQoSMIBAppliedMACGroupsObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.16
Collections of objects providing information for applied MACGroupss
OBJECT-GROUP    

alaQoSMIBMACGroupObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.17
Collections of objects providing information for MACGroups
OBJECT-GROUP    

alaQoSMIBAppliedMACGroupObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.18
Collections of objects providing information for applied MACGroups
OBJECT-GROUP    

alaQoSMIBPortGroupsObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.19
Collections of objects providing information for PortGroupss
OBJECT-GROUP    

alaQoSMIBAppliedPortGroupsObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.20
Collections of objects providing information for applied PortGroupss
OBJECT-GROUP    

alaQoSMIBPortGroupObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.21
Collections of objects providing information for PortGroups
OBJECT-GROUP    

alaQoSMIBAppliedPortGroupObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.22
Collections of objects providing information for applied PortGroups
OBJECT-GROUP    

alaQoSMIBMapGroupsObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.23
Collections of objects providing information for MapGroupss
OBJECT-GROUP    

alaQoSMIBAppliedMapGroupsObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.24
Collections of objects providing information for applied MapGroupss
OBJECT-GROUP    

alaQoSMIBMapGroupObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.25
Collections of objects providing information for MapGroups
OBJECT-GROUP    

alaQoSMIBAppliedMapGroupObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.26
Collections of objects providing information for applied MapGroups
OBJECT-GROUP    

alaQoSMIBActionObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.27
Collections of objects providing information for Actions
OBJECT-GROUP    

alaQoSMIBAppliedActionObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.28
Collections of objects providing information for applied Actions
OBJECT-GROUP    

alaQoSMIBPortObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.29
Collections of objects providing information for Ports
OBJECT-GROUP    

alaQoSMIBConfigObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.30
Collections of objects providing information for Configs
OBJECT-GROUP    

alaQoSMIBStatsObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.31
Collections of objects providing information for Statss
OBJECT-GROUP    

alaQoSMIBQueueObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.32
Collections of objects providing information for Queues
OBJECT-GROUP    

alaQoSMIBSlotObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.33
Collections of objects providing information for Slots
OBJECT-GROUP    

alaQoSMIBClassifyObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.34
Collections of objects providing information for Classifys
OBJECT-GROUP    

alaQoSMIBRuleGroupsObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.35
Collections of objects providing information for RuleGroupss
OBJECT-GROUP    

alaQoSMIBAppliedRuleGroupsObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.36
Collections of objects providing information for applied RuleGroupss
OBJECT-GROUP    

alaQoSMIBRuleGroupObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.37
Collections of objects providing information for RuleGroups
OBJECT-GROUP    

alaQoSMIBAppliedRuleGroupObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.38
Collections of objects providing information for applied RuleGroups
OBJECT-GROUP    

alaQoSVlanGroupsObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.39
Collections of objects providing QoS Vlan Groups definitions.
OBJECT-GROUP    

alaQoSAppliedVlanGroupsObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.40
Collections of objects providing applied QoS Vlan Groups definitions.
OBJECT-GROUP    

alaQoSVlanGroupObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.41
Collections of objects providing QoS Vlan Groups definitions.
OBJECT-GROUP    

alaQoSAppliedVlanGroupObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.42
Collections of objects providing applied QoS Vlan Groups definitions.
OBJECT-GROUP    

alaQoSMIBHwLoopBackProfileObjects 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.43
Collections of objects providing information for Hardware Loopback
OBJECT-GROUP    

alaQoSMIBCompliances 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.2
Branch for QoS Compliance Statements.
OBJECT-IDENTITY    

alaQoSMIBCompliance 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.2.1
Compliance statement for QoS.
MODULE-COMPLIANCE    

Defined Objects

QoSRuleEntry  
SEQUENCE    
  DisplayString as alaQoSRuleName  
  INTEGER as alaQoSRuleEnabled  
  INTEGER as alaQoSRuleSource  
  Integer32 as alaQoSRulePrecedence  
  DisplayString as alaQoSRuleCondition  
  DisplayString as alaQoSRuleAction  
  INTEGER as alaQoSRuleReflexive  
  INTEGER as alaQoSRuleSave  
  INTEGER as alaQoSRuleLog  
  Counter32 as alaQoSRuleMatches  
  INTEGER as alaQoSRuleEnforced  
  INTEGER as alaQoSRuleActive  
  RowStatus as alaQoSRuleRowStatus  
  DisplayString as alaQoSRuleValidityPeriod  
  INTEGER as alaQoSRuleValidityPeriodStatus  
  Integer32 as alaQoSRuleLogInterval  
  INTEGER as alaQoSRuleCountType  
  Counter64 as alaQoSRulePacketCount  
  Counter64 as alaQoSRuleByteCount  
  Counter64 as alaQoSRuleExcessPacketCount  
  Counter64 as alaQoSRuleExcessByteCount  
  Integer32 as alaQoSRuleType  
  INTEGER as alaQoSRuleTrapEvents  
  INTEGER as alaQoSRuleDefaultList  
  Counter64 as alaQoSRuleGreenCount  
  Counter64 as alaQoSRuleYellowCount  
  Counter64 as alaQoSRuleRedCount  
  Counter64 as alaQoSRuleNonGreenCount  
  Counter64 as alaQoSRuleNonRedCount  

QoSAppliedRuleEntry  
SEQUENCE    
  DisplayString as alaQoSAppliedRuleName  
  INTEGER as alaQoSAppliedRuleEnabled  
  INTEGER as alaQoSAppliedRuleSource  
  Integer32 as alaQoSAppliedRulePrecedence  
  DisplayString as alaQoSAppliedRuleCondition  
  DisplayString as alaQoSAppliedRuleAction  
  INTEGER as alaQoSAppliedRuleReflexive  
  INTEGER as alaQoSAppliedRuleSave  
  INTEGER as alaQoSAppliedRuleLog  
  Counter32 as alaQoSAppliedRuleMatches  
  INTEGER as alaQoSAppliedRuleEnforced  
  INTEGER as alaQoSAppliedRuleActive  
  RowStatus as alaQoSAppliedRuleRowStatus  
  DisplayString as alaQoSAppliedRuleValidityPeriod  
  INTEGER as alaQoSAppliedRuleValidityPeriodStatus  
  Integer32 as alaQoSAppliedRuleLogInterval  
  INTEGER as alaQoSAppliedRuleCountType  
  Counter64 as alaQoSAppliedRulePacketCount  
  Counter64 as alaQoSAppliedRuleByteCount  
  Counter64 as alaQoSAppliedRuleExcessPacketCount  
  Counter64 as alaQoSAppliedRuleExcessByteCount  
  Integer32 as alaQoSAppliedRuleType  
  INTEGER as alaQoSAppliedRuleTrapEvents  
  INTEGER as alaQoSAppliedRuleDefaultList  
  Counter64 as alaQoSAppliedRuleGreenCount  
  Counter64 as alaQoSAppliedRuleYellowCount  
  Counter64 as alaQoSAppliedRuleRedCount  
  Counter64 as alaQoSAppliedRuleNonGreenCount  
  Counter64 as alaQoSAppliedRuleNonRedCount  

QoSConditionEntry  
SEQUENCE    
  DisplayString as alaQoSConditionName  
  INTEGER as alaQoSConditionSource  
  Integer32 as alaQoSConditionSourceSlot  
  INTEGER as alaQoSConditionSourceSlotStatus  
  Integer32 as alaQoSConditionSourcePort  
  DisplayString as alaQoSConditionSourcePortGroup  
  INTEGER as alaQoSConditionSourcePortGroupStatus  
  Integer32 as alaQoSConditionDestinationSlot  
  INTEGER as alaQoSConditionDestinationSlotStatus  
  Integer32 as alaQoSConditionDestinationPort  
  DisplayString as alaQoSConditionDestinationPortGroup  
  INTEGER as alaQoSConditionDestinationPortGroupStatus  
  INTEGER as alaQoSConditionSourceInterfaceType  
  INTEGER as alaQoSConditionSourceInterfaceTypeStatus  
  INTEGER as alaQoSConditionDestinationInterfaceType  
  INTEGER as alaQoSConditionDestinationInterfaceTypeStatus  
  MacAddress as alaQoSConditionSourceMacAddr  
  INTEGER as alaQoSConditionSourceMacAddrStatus  
  MacAddress as alaQoSConditionSourceMacMask  
  DisplayString as alaQoSConditionSourceMacGroup  
  INTEGER as alaQoSConditionSourceMacGroupStatus  
  MacAddress as alaQoSConditionDestinationMacAddr  
  INTEGER as alaQoSConditionDestinationMacAddrStatus  
  MacAddress as alaQoSConditionDestinationMacMask  
  DisplayString as alaQoSConditionDestinationMacGroup  
  INTEGER as alaQoSConditionDestinationMacGroupStatus  
  Integer32 as alaQoSConditionSourceVlan  
  INTEGER as alaQoSConditionSourceVlanStatus  
  Integer32 as alaQoSConditionDestinationVlan  
  INTEGER as alaQoSConditionDestinationVlanStatus  
  Integer32 as alaQoSCondition8021p  
  INTEGER as alaQoSCondition8021pStatus  
  IpAddress as alaQoSConditionSourceIpAddr  
  INTEGER as alaQoSConditionSourceIpAddrStatus  
  IpAddress as alaQoSConditionSourceIpMask  
  DisplayString as alaQoSConditionSourceNetworkGroup  
  INTEGER as alaQoSConditionSourceNetworkGroupStatus  
  IpAddress as alaQoSConditionDestinationIpAddr  
  INTEGER as alaQoSConditionDestinationIpAddrStatus  
  IpAddress as alaQoSConditionDestinationIpMask  
  DisplayString as alaQoSConditionDestinationNetworkGroup  
  INTEGER as alaQoSConditionDestinationNetworkGroupStatus  
  IpAddress as alaQoSConditionMulticastIpAddr  
  INTEGER as alaQoSConditionMulticastIpAddrStatus  
  IpAddress as alaQoSConditionMulticastIpMask  
  DisplayString as alaQoSConditionMulticastNetworkGroup  
  INTEGER as alaQoSConditionMulticastNetworkGroupStatus  
  Integer32 as alaQoSConditionTos  
  INTEGER as alaQoSConditionTosStatus  
  Integer32 as alaQoSConditionTosMask  
  Integer32 as alaQoSConditionDscp  
  INTEGER as alaQoSConditionDscpStatus  
  Integer32 as alaQoSConditionDscpMask  
  Integer32 as alaQoSConditionIpProtocol  
  INTEGER as alaQoSConditionIpProtocolStatus  
  Integer32 as alaQoSConditionSourceIpPort  
  INTEGER as alaQoSConditionSourceIpPortStatus  
  Integer32 as alaQoSConditionDestinationIpPort  
  INTEGER as alaQoSConditionDestinationIpPortStatus  
  DisplayString as alaQoSConditionService  
  INTEGER as alaQoSConditionServiceStatus  
  DisplayString as alaQoSConditionServiceGroup  
  INTEGER as alaQoSConditionServiceGroupStatus  
  Integer32 as alaQoSConditionIcmpType  
  INTEGER as alaQoSConditionIcmpTypeStatus  
  Integer32 as alaQoSConditionIcmpCode  
  INTEGER as alaQoSConditionIcmpCodeStatus  
  Integer32 as alaQoSConditionDlci  
  INTEGER as alaQoSConditionDlciStatus  
  RowStatus as alaQoSConditionRowStatus  
  Integer32 as alaQoSConditionSourcePortEnd  
  Integer32 as alaQoSConditionDestinationPortEnd  
  Integer32 as alaQoSConditionSourceIpPortEnd  
  Integer32 as alaQoSConditionDestinationIpPortEnd  
  Integer32 as alaQoSConditionSourceTcpPort  
  INTEGER as alaQoSConditionSourceTcpPortStatus  
  Integer32 as alaQoSConditionSourceTcpPortEnd  
  Integer32 as alaQoSConditionDestinationTcpPort  
  INTEGER as alaQoSConditionDestinationTcpPortStatus  
  Integer32 as alaQoSConditionDestinationTcpPortEnd  
  Integer32 as alaQoSConditionSourceUdpPort  
  INTEGER as alaQoSConditionSourceUdpPortStatus  
  Integer32 as alaQoSConditionSourceUdpPortEnd  
  Integer32 as alaQoSConditionDestinationUdpPort  
  INTEGER as alaQoSConditionDestinationUdpPortStatus  
  Integer32 as alaQoSConditionDestinationUdpPortEnd  
  Integer32 as alaQoSConditionEthertype  
  INTEGER as alaQoSConditionEthertypeStatus  
  INTEGER as alaQoSConditionTcpFlags  
  INTEGER as alaQoSConditionTcpFlagsStatus  
  Integer32 as alaQoSConditionTcpFlagsVal  
  INTEGER as alaQoSConditionTcpFlagsValStatus  
  Integer32 as alaQoSConditionTcpFlagsMask  
  INTEGER as alaQoSConditionTcpFlagsMaskStatus  
  INTEGER as alaQoSConditionTcpEstablished  
  Ipv6Address as alaQoSConditionSourceIpv6Addr  
  INTEGER as alaQoSConditionSourceIpv6AddrStatus  
  Ipv6Address as alaQoSConditionSourceIpv6Mask  
  Ipv6Address as alaQoSConditionDestinationIpv6Addr  
  INTEGER as alaQoSConditionDestinationIpv6AddrStatus  
  Ipv6Address as alaQoSConditionDestinationIpv6Mask  
  INTEGER as alaQoSConditionIpv6Traffic  
  Integer32 as alaQoSConditionIpv6NH  
  INTEGER as alaQoSConditionIpv6NHStatus  
  Integer32 as alaQoSConditionIpv6FlowLabel  
  INTEGER as alaQoSConditionIpv6FlowLabelStatus  
  Ipv6Address as alaQoSConditionMcastIpv6Addr  
  INTEGER as alaQoSConditionMcastIpv6AddrStatus  
  Ipv6Address as alaQoSConditionMcastIpv6Mask  
  Integer32 as alaQoSConditionDscpEnd  
  Integer32 as alaQoSConditionInnerSourceVlan  
  INTEGER as alaQoSConditionInnerSourceVlanStatus  
  Integer32 as alaQoSConditionInner8021p  
  INTEGER as alaQoSConditionInner8021pStatus  
  DisplayString as alaQoSConditionVrfName  
  INTEGER as alaQoSConditionVrfNameStatus  
  Integer32 as alaQoSCondition8021pEnd  
  Integer32 as alaQoSConditionInner8021pEnd  
  DisplayString as alaQoSConditionSourceVlanGroup  
  INTEGER as alaQoSConditionSourceVlanGroupStatus  
  DisplayString as alaQoSConditionInnerSourceVlanGroup  
  INTEGER as alaQoSConditionInnerSourceVlanGroupStatus  

QoSAppliedConditionEntry  
SEQUENCE    
  DisplayString as alaQoSAppliedConditionName  
  INTEGER as alaQoSAppliedConditionSource  
  Integer32 as alaQoSAppliedConditionSourceSlot  
  INTEGER as alaQoSAppliedConditionSourceSlotStatus  
  Integer32 as alaQoSAppliedConditionSourcePort  
  DisplayString as alaQoSAppliedConditionSourcePortGroup  
  INTEGER as alaQoSAppliedConditionSourcePortGroupStatus  
  Integer32 as alaQoSAppliedConditionDestinationSlot  
  INTEGER as alaQoSAppliedConditionDestinationSlotStatus  
  Integer32 as alaQoSAppliedConditionDestinationPort  
  DisplayString as alaQoSAppliedConditionDestinationPortGroup  
  INTEGER as alaQoSAppliedConditionDestinationPortGroupStatus  
  INTEGER as alaQoSAppliedConditionSourceInterfaceType  
  INTEGER as alaQoSAppliedConditionSourceInterfaceTypeStatus  
  INTEGER as alaQoSAppliedConditionDestinationInterfaceType  
  INTEGER as alaQoSAppliedConditionDestinationInterfaceTypeStatus  
  MacAddress as alaQoSAppliedConditionSourceMacAddr  
  INTEGER as alaQoSAppliedConditionSourceMacAddrStatus  
  MacAddress as alaQoSAppliedConditionSourceMacMask  
  DisplayString as alaQoSAppliedConditionSourceMacGroup  
  INTEGER as alaQoSAppliedConditionSourceMacGroupStatus  
  MacAddress as alaQoSAppliedConditionDestinationMacAddr  
  INTEGER as alaQoSAppliedConditionDestinationMacAddrStatus  
  MacAddress as alaQoSAppliedConditionDestinationMacMask  
  DisplayString as alaQoSAppliedConditionDestinationMacGroup  
  INTEGER as alaQoSAppliedConditionDestinationMacGroupStatus  
  Integer32 as alaQoSAppliedConditionSourceVlan  
  INTEGER as alaQoSAppliedConditionSourceVlanStatus  
  Integer32 as alaQoSAppliedConditionDestinationVlan  
  INTEGER as alaQoSAppliedConditionDestinationVlanStatus  
  Integer32 as alaQoSAppliedCondition8021p  
  INTEGER as alaQoSAppliedCondition8021pStatus  
  IpAddress as alaQoSAppliedConditionSourceIpAddr  
  INTEGER as alaQoSAppliedConditionSourceIpAddrStatus  
  IpAddress as alaQoSAppliedConditionSourceIpMask  
  DisplayString as alaQoSAppliedConditionSourceNetworkGroup  
  INTEGER as alaQoSAppliedConditionSourceNetworkGroupStatus  
  IpAddress as alaQoSAppliedConditionDestinationIpAddr  
  INTEGER as alaQoSAppliedConditionDestinationIpAddrStatus  
  IpAddress as alaQoSAppliedConditionDestinationIpMask  
  DisplayString as alaQoSAppliedConditionDestinationNetworkGroup  
  INTEGER as alaQoSAppliedConditionDestinationNetworkGroupStatus  
  IpAddress as alaQoSAppliedConditionMulticastIpAddr  
  INTEGER as alaQoSAppliedConditionMulticastIpAddrStatus  
  IpAddress as alaQoSAppliedConditionMulticastIpMask  
  DisplayString as alaQoSAppliedConditionMulticastNetworkGroup  
  INTEGER as alaQoSAppliedConditionMulticastNetworkGroupStatus  
  Integer32 as alaQoSAppliedConditionTos  
  INTEGER as alaQoSAppliedConditionTosStatus  
  Integer32 as alaQoSAppliedConditionTosMask  
  Integer32 as alaQoSAppliedConditionDscp  
  INTEGER as alaQoSAppliedConditionDscpStatus  
  Integer32 as alaQoSAppliedConditionDscpMask  
  Integer32 as alaQoSAppliedConditionIpProtocol  
  INTEGER as alaQoSAppliedConditionIpProtocolStatus  
  Integer32 as alaQoSAppliedConditionSourceIpPort  
  INTEGER as alaQoSAppliedConditionSourceIpPortStatus  
  Integer32 as alaQoSAppliedConditionDestinationIpPort  
  INTEGER as alaQoSAppliedConditionDestinationIpPortStatus  
  DisplayString as alaQoSAppliedConditionService  
  INTEGER as alaQoSAppliedConditionServiceStatus  
  DisplayString as alaQoSAppliedConditionServiceGroup  
  INTEGER as alaQoSAppliedConditionServiceGroupStatus  
  Integer32 as alaQoSAppliedConditionIcmpType  
  INTEGER as alaQoSAppliedConditionIcmpTypeStatus  
  Integer32 as alaQoSAppliedConditionIcmpCode  
  INTEGER as alaQoSAppliedConditionIcmpCodeStatus  
  Integer32 as alaQoSAppliedConditionDlci  
  INTEGER as alaQoSAppliedConditionDlciStatus  
  RowStatus as alaQoSAppliedConditionRowStatus  
  Integer32 as alaQoSAppliedConditionSourcePortEnd  
  Integer32 as alaQoSAppliedConditionDestinationPortEnd  
  Integer32 as alaQoSAppliedConditionSourceIpPortEnd  
  Integer32 as alaQoSAppliedConditionDestinationIpPortEnd  
  Integer32 as alaQoSAppliedConditionSourceTcpPort  
  INTEGER as alaQoSAppliedConditionSourceTcpPortStatus  
  Integer32 as alaQoSAppliedConditionSourceTcpPortEnd  
  Integer32 as alaQoSAppliedConditionDestinationTcpPort  
  INTEGER as alaQoSAppliedConditionDestinationTcpPortStatus  
  Integer32 as alaQoSAppliedConditionDestinationTcpPortEnd  
  Integer32 as alaQoSAppliedConditionSourceUdpPort  
  INTEGER as alaQoSAppliedConditionSourceUdpPortStatus  
  Integer32 as alaQoSAppliedConditionSourceUdpPortEnd  
  Integer32 as alaQoSAppliedConditionDestinationUdpPort  
  INTEGER as alaQoSAppliedConditionDestinationUdpPortStatus  
  Integer32 as alaQoSAppliedConditionDestinationUdpPortEnd  
  Integer32 as alaQoSAppliedConditionEthertype  
  INTEGER as alaQoSAppliedConditionEthertypeStatus  
  INTEGER as alaQoSAppliedConditionTcpFlags  
  INTEGER as alaQoSAppliedConditionTcpFlagsStatus  
  Integer32 as alaQoSAppliedConditionTcpFlagsVal  
  INTEGER as alaQoSAppliedConditionTcpFlagsValStatus  
  Integer32 as alaQoSAppliedConditionTcpFlagsMask  
  INTEGER as alaQoSAppliedConditionTcpFlagsMaskStatus  
  INTEGER as alaQoSAppliedConditionTcpEstablished  
  Ipv6Address as alaQoSAppliedConditionSourceIpv6Addr  
  INTEGER as alaQoSAppliedConditionSourceIpv6AddrStatus  
  Ipv6Address as alaQoSAppliedConditionSourceIpv6Mask  
  Ipv6Address as alaQoSAppliedConditionDestinationIpv6Addr  
  INTEGER as alaQoSAppliedConditionDestinationIpv6AddrStatus  
  Ipv6Address as alaQoSAppliedConditionDestinationIpv6Mask  
  INTEGER as alaQoSAppliedConditionIpv6Traffic  
  Integer32 as alaQoSAppliedConditionIpv6NH  
  INTEGER as alaQoSAppliedConditionIpv6NHStatus  
  Integer32 as alaQoSAppliedConditionIpv6FlowLabel  
  INTEGER as alaQoSAppliedConditionIpv6FlowLabelStatus  
  Ipv6Address as alaQoSAppliedConditionMcastIpv6Addr  
  INTEGER as alaQoSAppliedConditionMcastIpv6AddrStatus  
  Ipv6Address as alaQoSAppliedConditionMcastIpv6Mask  
  Integer32 as alaQoSAppliedConditionDscpEnd  
  Integer32 as alaQoSAppliedConditionInnerSourceVlan  
  INTEGER as alaQoSAppliedConditionInnerSourceVlanStatus  
  Integer32 as alaQoSAppliedConditionInner8021p  
  INTEGER as alaQoSAppliedConditionInner8021pStatus  
  DisplayString as alaQoSAppliedConditionVrfName  
  INTEGER as alaQoSAppliedConditionVrfNameStatus  
  Integer32 as alaQoSAppliedCondition8021pEnd  
  Integer32 as alaQoSAppliedConditionInner8021pEnd  
  DisplayString as alaQoSAppliedConditionSourceVlanGroup  
  INTEGER as alaQoSAppliedConditionSourceVlanGroupStatus  
  DisplayString as alaQoSAppliedConditionInnerSourceVlanGroup  
  INTEGER as alaQoSAppliedConditionInnerSourceVlanGroupStatus  

QoSServiceEntry  
SEQUENCE    
  DisplayString as alaQoSServiceName  
  INTEGER as alaQoSServiceSource  
  Integer32 as alaQoSServiceProtocol  
  Integer32 as alaQoSServiceSourceIpPort  
  INTEGER as alaQoSServiceSourceIpPortStatus  
  Integer32 as alaQoSServiceDestinationIpPort  
  INTEGER as alaQoSServiceDestinationIpPortStatus  
  RowStatus as alaQoSServiceRowStatus  
  Integer32 as alaQoSServiceSourceIpPortEnd  
  Integer32 as alaQoSServiceDestinationIpPortEnd  
  Integer32 as alaQoSServiceSourceTcpPort  
  INTEGER as alaQoSServiceSourceTcpPortStatus  
  Integer32 as alaQoSServiceSourceTcpPortEnd  
  Integer32 as alaQoSServiceDestinationTcpPort  
  INTEGER as alaQoSServiceDestinationTcpPortStatus  
  Integer32 as alaQoSServiceDestinationTcpPortEnd  
  Integer32 as alaQoSServiceSourceUdpPort  
  INTEGER as alaQoSServiceSourceUdpPortStatus  
  Integer32 as alaQoSServiceSourceUdpPortEnd  
  Integer32 as alaQoSServiceDestinationUdpPort  
  INTEGER as alaQoSServiceDestinationUdpPortStatus  
  Integer32 as alaQoSServiceDestinationUdpPortEnd  

QoSAppliedServiceEntry  
SEQUENCE    
  DisplayString as alaQoSAppliedServiceName  
  INTEGER as alaQoSAppliedServiceSource  
  Integer32 as alaQoSAppliedServiceProtocol  
  Integer32 as alaQoSAppliedServiceSourceIpPort  
  INTEGER as alaQoSAppliedServiceSourceIpPortStatus  
  Integer32 as alaQoSAppliedServiceDestinationIpPort  
  INTEGER as alaQoSAppliedServiceDestinationIpPortStatus  
  RowStatus as alaQoSAppliedServiceRowStatus  
  Integer32 as alaQoSAppliedServiceSourceIpPortEnd  
  Integer32 as alaQoSAppliedServiceDestinationIpPortEnd  
  Integer32 as alaQoSAppliedServiceSourceTcpPort  
  INTEGER as alaQoSAppliedServiceSourceTcpPortStatus  
  Integer32 as alaQoSAppliedServiceSourceTcpPortEnd  
  Integer32 as alaQoSAppliedServiceDestinationTcpPort  
  INTEGER as alaQoSAppliedServiceDestinationTcpPortStatus  
  Integer32 as alaQoSAppliedServiceDestinationTcpPortEnd  
  Integer32 as alaQoSAppliedServiceSourceUdpPort  
  INTEGER as alaQoSAppliedServiceSourceUdpPortStatus  
  Integer32 as alaQoSAppliedServiceSourceUdpPortEnd  
  Integer32 as alaQoSAppliedServiceDestinationUdpPort  
  INTEGER as alaQoSAppliedServiceDestinationUdpPortStatus  
  Integer32 as alaQoSAppliedServiceDestinationUdpPortEnd  

QoSServiceGroupsEntry  
SEQUENCE    
  DisplayString as alaQoSServiceGroupsName  
  INTEGER as alaQoSServiceGroupsSource  
  RowStatus as alaQoSServiceGroupsStatus  

QoSAppliedServiceGroupsEntry  
SEQUENCE    
  DisplayString as alaQoSAppliedServiceGroupsName  
  INTEGER as alaQoSAppliedServiceGroupsSource  
  RowStatus as alaQoSAppliedServiceGroupsStatus  

QoSServiceGroupEntry  
SEQUENCE    
  DisplayString as alaQoSServiceGroupServiceName  
  RowStatus as alaQoSServiceGroupStatus  

QoSAppliedServiceGroupEntry  
SEQUENCE    
  DisplayString as alaQoSAppliedServiceGroupServiceName  
  RowStatus as alaQoSAppliedServiceGroupStatus  

QoSNetworkGroupsEntry  
SEQUENCE    
  DisplayString as alaQoSNetworkGroupsName  
  INTEGER as alaQoSNetworkGroupsSource  
  RowStatus as alaQoSNetworkGroupsStatus  

QoSAppliedNetworkGroupsEntry  
SEQUENCE    
  DisplayString as alaQoSAppliedNetworkGroupsName  
  INTEGER as alaQoSAppliedNetworkGroupsSource  
  RowStatus as alaQoSAppliedNetworkGroupsStatus  

QoSNetworkGroupEntry  
SEQUENCE    
  IpAddress as alaQoSNetworkGroupIpAddr  
  IpAddress as alaQoSNetworkGroupIpMask  
  RowStatus as alaQoSNetworkGroupStatus  

QoSAppliedNetworkGroupEntry  
SEQUENCE    
  IpAddress as alaQoSAppliedNetworkGroupIpAddr  
  IpAddress as alaQoSAppliedNetworkGroupIpMask  
  RowStatus as alaQoSAppliedNetworkGroupStatus  

QoSMACGroupsEntry  
SEQUENCE    
  DisplayString as alaQoSMACGroupsName  
  INTEGER as alaQoSMACGroupsSource  
  RowStatus as alaQoSMACGroupsStatus  

QoSAppliedMACGroupsEntry  
SEQUENCE    
  DisplayString as alaQoSAppliedMACGroupsName  
  INTEGER as alaQoSAppliedMACGroupsSource  
  RowStatus as alaQoSAppliedMACGroupsStatus  

QoSMACGroupEntry  
SEQUENCE    
  MacAddress as alaQoSMACGroupMacAddr  
  MacAddress as alaQoSMACGroupMacMask  
  RowStatus as alaQoSMACGroupStatus  

QoSAppliedMACGroupEntry  
SEQUENCE    
  MacAddress as alaQoSAppliedMACGroupMacAddr  
  MacAddress as alaQoSAppliedMACGroupMacMask  
  RowStatus as alaQoSAppliedMACGroupStatus  

QoSPortGroupsEntry  
SEQUENCE    
  DisplayString as alaQoSPortGroupsName  
  INTEGER as alaQoSPortGroupsSource  
  RowStatus as alaQoSPortGroupsStatus  

QoSAppliedPortGroupsEntry  
SEQUENCE    
  DisplayString as alaQoSAppliedPortGroupsName  
  INTEGER as alaQoSAppliedPortGroupsSource  
  RowStatus as alaQoSAppliedPortGroupsStatus  

QoSPortGroupEntry  
SEQUENCE    
  Integer32 as alaQoSPortGroupSlot  
  Integer32 as alaQoSPortGroupPort  
  RowStatus as alaQoSPortGroupStatus  
  Integer32 as alaQoSPortGroupPortEnd  

QoSAppliedPortGroupEntry  
SEQUENCE    
  Integer32 as alaQoSAppliedPortGroupSlot  
  Integer32 as alaQoSAppliedPortGroupPort  
  RowStatus as alaQoSAppliedPortGroupStatus  
  Integer32 as alaQoSAppliedPortGroupPortEnd  

QoSMapGroupsEntry  
SEQUENCE    
  DisplayString as alaQoSMapGroupsName  
  INTEGER as alaQoSMapGroupsSource  
  RowStatus as alaQoSMapGroupsStatus  

QoSAppliedMapGroupsEntry  
SEQUENCE    
  DisplayString as alaQoSAppliedMapGroupsName  
  INTEGER as alaQoSAppliedMapGroupsSource  
  RowStatus as alaQoSAppliedMapGroupsStatus  

QoSMapGroupEntry  
SEQUENCE    
  Integer32 as alaQoSMapGroupKey  
  Integer32 as alaQoSMapGroupKeyEnd  
  Integer32 as alaQoSMapGroupValue  
  RowStatus as alaQoSMapGroupStatus  

QoSAppliedMapGroupEntry  
SEQUENCE    
  Integer32 as alaQoSAppliedMapGroupKey  
  Integer32 as alaQoSAppliedMapGroupKeyEnd  
  Integer32 as alaQoSAppliedMapGroupValue  
  RowStatus as alaQoSAppliedMapGroupStatus  

QoSActionEntry  
SEQUENCE    
  DisplayString as alaQoSActionName  
  INTEGER as alaQoSActionSource  
  INTEGER as alaQoSActionDisposition  
  INTEGER as alaQoSActionDropAlgorithm  
  Integer32 as alaQoSActionWredMaximumThreshold  
  INTEGER as alaQoSActionWredMaximumThresholdStatus  
  Integer32 as alaQoSActionWredMinimumThreshold  
  INTEGER as alaQoSActionWredMinimumThresholdStatus  
  Integer32 as alaQoSActionWredMaximumProbability  
  INTEGER as alaQoSActionWredMaximumProbabilityStatus  
  Integer32 as alaQoSActionMinimumBandwidth  
  INTEGER as alaQoSActionMinimumBandwidthStatus  
  Integer32 as alaQoSActionMaximumBandwidth  
  INTEGER as alaQoSActionMaximumBandwidthStatus  
  Integer32 as alaQoSActionPeakBandwidth  
  INTEGER as alaQoSActionPeakBandwidthStatus  
  Integer32 as alaQoSActionPriority  
  INTEGER as alaQoSActionPriorityStatus  
  INTEGER as alaQoSActionShared  
  Integer32 as alaQoSActionJitter  
  INTEGER as alaQoSActionJitterStatus  
  Integer32 as alaQoSActionLatency  
  INTEGER as alaQoSActionLatencyStatus  
  Integer32 as alaQoSActionMaximumDepth  
  INTEGER as alaQoSActionMaximumDepthStatus  
  Integer32 as alaQoSActionMaximumBuffers  
  INTEGER as alaQoSActionMaximumBuffersStatus  
  Integer32 as alaQoSAction8021p  
  INTEGER as alaQoSAction8021pStatus  
  Integer32 as alaQoSActionTos  
  INTEGER as alaQoSActionTosStatus  
  Integer32 as alaQoSActionDscp  
  INTEGER as alaQoSActionDscpStatus  
  INTEGER as alaQoSActionMapFrom  
  INTEGER as alaQoSActionMapTo  
  DisplayString as alaQoSActionMapGroup  
  INTEGER as alaQoSActionMapGroupStatus  
  IpAddress as alaQoSActionSourceRewriteIpAddr  
  INTEGER as alaQoSActionSourceRewriteIpAddrStatus  
  IpAddress as alaQoSActionSourceRewriteIpMask  
  DisplayString as alaQoSActionSourceRewriteNetworkGroup  
  INTEGER as alaQoSActionSourceRewriteNetworkGroupStatus  
  IpAddress as alaQoSActionDestinationRewriteIpAddr  
  INTEGER as alaQoSActionDestinationRewriteIpAddrStatus  
  IpAddress as alaQoSActionDestinationRewriteIpMask  
  DisplayString as alaQoSActionDestinationRewriteNetworkGroup  
  INTEGER as alaQoSActionDestinationRewriteNetworkGroupStatus  
  DisplayString as alaQoSActionLoadBalanceGroup  
  INTEGER as alaQoSActionLoadBalanceGroupStatus  
  IpAddress as alaQoSActionPermanentGatewayIpAddr  
  INTEGER as alaQoSActionPermanentGatewayIpAddrStatus  
  IpAddress as alaQoSActionAlternateGatewayIpAddr  
  INTEGER as alaQoSActionAlternateGatewayIpAddrStatus  
  RowStatus as alaQoSActionRowStatus  
  Integer32 as alaQoSActionMinimumDepth  
  INTEGER as alaQoSActionMinimumDepthStatus  
  INTEGER as alaQoSActionVPNAccess  
  INTEGER as alaQoSActionNocache  
  INTEGER as alaQoSActionPortdisable  
  Integer32 as alaQoSActionRedirectSlot  
  INTEGER as alaQoSActionRedirectSlotStatus  
  Integer32 as alaQoSActionRedirectPort  
  Integer32 as alaQoSActionRedirectAgg  
  INTEGER as alaQoSActionRedirectAggStatus  
  Integer32 as alaQoSActionMirrorSlot  
  Integer32 as alaQoSActionMirrorPort  
  INTEGER as alaQoSActionMirrorMode  
  INTEGER as alaQoSActionMirrorModeStatus  
  Integer32 as alaQoSActionCIR  
  INTEGER as alaQoSActionCIRStatus  
  Integer32 as alaQoSActionCBS  
  INTEGER as alaQoSActionCBSStatus  
  Integer32 as alaQoSActionPIR  
  INTEGER as alaQoSActionPIRStatus  
  Integer32 as alaQoSActionPBS  
  INTEGER as alaQoSActionPBSStatus  
  INTEGER as alaQoSActionCounterColor  

QoSAppliedActionEntry  
SEQUENCE    
  DisplayString as alaQoSAppliedActionName  
  INTEGER as alaQoSAppliedActionSource  
  INTEGER as alaQoSAppliedActionDisposition  
  INTEGER as alaQoSAppliedActionDropAlgorithm  
  Integer32 as alaQoSAppliedActionWredMaximumThreshold  
  INTEGER as alaQoSAppliedActionWredMaximumThresholdStatus  
  Integer32 as alaQoSAppliedActionWredMinimumThreshold  
  INTEGER as alaQoSAppliedActionWredMinimumThresholdStatus  
  Integer32 as alaQoSAppliedActionWredMaximumProbability  
  INTEGER as alaQoSAppliedActionWredMaximumProbabilityStatus  
  Integer32 as alaQoSAppliedActionMinimumBandwidth  
  INTEGER as alaQoSAppliedActionMinimumBandwidthStatus  
  Integer32 as alaQoSAppliedActionMaximumBandwidth  
  INTEGER as alaQoSAppliedActionMaximumBandwidthStatus  
  Integer32 as alaQoSAppliedActionPeakBandwidth  
  INTEGER as alaQoSAppliedActionPeakBandwidthStatus  
  Integer32 as alaQoSAppliedActionPriority  
  INTEGER as alaQoSAppliedActionPriorityStatus  
  INTEGER as alaQoSAppliedActionShared  
  Integer32 as alaQoSAppliedActionJitter  
  INTEGER as alaQoSAppliedActionJitterStatus  
  Integer32 as alaQoSAppliedActionLatency  
  INTEGER as alaQoSAppliedActionLatencyStatus  
  Integer32 as alaQoSAppliedActionMaximumDepth  
  INTEGER as alaQoSAppliedActionMaximumDepthStatus  
  Integer32 as alaQoSAppliedActionMaximumBuffers  
  INTEGER as alaQoSAppliedActionMaximumBuffersStatus  
  Integer32 as alaQoSAppliedAction8021p  
  INTEGER as alaQoSAppliedAction8021pStatus  
  Integer32 as alaQoSAppliedActionTos  
  INTEGER as alaQoSAppliedActionTosStatus  
  Integer32 as alaQoSAppliedActionDscp  
  INTEGER as alaQoSAppliedActionDscpStatus  
  INTEGER as alaQoSAppliedActionMapFrom  
  INTEGER as alaQoSAppliedActionMapTo  
  DisplayString as alaQoSAppliedActionMapGroup  
  INTEGER as alaQoSAppliedActionMapGroupStatus  
  IpAddress as alaQoSAppliedActionSourceRewriteIpAddr  
  INTEGER as alaQoSAppliedActionSourceRewriteIpAddrStatus  
  IpAddress as alaQoSAppliedActionSourceRewriteIpMask  
  DisplayString as alaQoSAppliedActionSourceRewriteNetworkGroup  
  INTEGER as alaQoSAppliedActionSourceRewriteNetworkGroupStatus  
  IpAddress as alaQoSAppliedActionDestinationRewriteIpAddr  
  INTEGER as alaQoSAppliedActionDestinationRewriteIpAddrStatus  
  IpAddress as alaQoSAppliedActionDestinationRewriteIpMask  
  DisplayString as alaQoSAppliedActionDestinationRewriteNetworkGroup  
  INTEGER as alaQoSAppliedActionDestinationRewriteNetworkGroupStatus  
  DisplayString as alaQoSAppliedActionLoadBalanceGroup  
  INTEGER as alaQoSAppliedActionLoadBalanceGroupStatus  
  IpAddress as alaQoSAppliedActionPermanentGatewayIpAddr  
  INTEGER as alaQoSAppliedActionPermanentGatewayIpAddrStatus  
  IpAddress as alaQoSAppliedActionAlternateGatewayIpAddr  
  INTEGER as alaQoSAppliedActionAlternateGatewayIpAddrStatus  
  RowStatus as alaQoSAppliedActionRowStatus  
  Integer32 as alaQoSAppliedActionMinimumDepth  
  INTEGER as alaQoSAppliedActionMinimumDepthStatus  
  INTEGER as alaQoSAppliedActionVPNAccess  
  INTEGER as alaQoSAppliedActionNocache  
  INTEGER as alaQoSAppliedActionPortdisable  
  Integer32 as alaQoSAppliedActionRedirectSlot  
  INTEGER as alaQoSAppliedActionRedirectSlotStatus  
  Integer32 as alaQoSAppliedActionRedirectPort  
  Integer32 as alaQoSAppliedActionRedirectAgg  
  INTEGER as alaQoSAppliedActionRedirectAggStatus  
  Integer32 as alaQoSAppliedActionMirrorSlot  
  Integer32 as alaQoSAppliedActionMirrorPort  
  INTEGER as alaQoSAppliedActionMirrorMode  
  INTEGER as alaQoSAppliedActionMirrorModeStatus  
  Integer32 as alaQoSAppliedActionCIR  
  INTEGER as alaQoSAppliedActionCIRStatus  
  Integer32 as alaQoSAppliedActionCBS  
  INTEGER as alaQoSAppliedActionCBSStatus  
  Integer32 as alaQoSAppliedActionPIR  
  INTEGER as alaQoSAppliedActionPIRStatus  
  Integer32 as alaQoSAppliedActionPBS  
  INTEGER as alaQoSAppliedActionPBSStatus  
  INTEGER as alaQoSAppliedActionCounterColor  

QoSPortEntry  
SEQUENCE    
  Integer32 as alaQoSPortSlot  
  Integer32 as alaQoSPortPort  
  INTEGER as alaQoSPortEnabled  
  INTEGER as alaQoSPortAppliedEnabled  
  INTEGER as alaQoSPortInterfaceType  
  INTEGER as alaQoSPortTrusted  
  Integer32 as alaQoSPortDefault8021p  
  Integer32 as alaQoSPortDefaultDSCP  
  Integer32 as alaQoSPortMaximumReservedBandwidth  
  INTEGER as alaQoSPortMaximumReservedBandwidthStatus  
  Integer32 as alaQoSPortAppliedMaximumReservedBandwidth  
  INTEGER as alaQoSPortAppliedMaximumReservedBandwidthStatus  
  Integer32 as alaQoSPortMaximumSignalledBandwidth  
  INTEGER as alaQoSPortMaximumSignalledBandwidthStatus  
  Integer32 as alaQoSPortAppliedMaximumSignalledBandwidth  
  INTEGER as alaQoSPortAppliedMaximumSignalledBandwidthStatus  
  Integer32 as alaQoSPortDefaultQueues  
  Integer32 as alaQoSPortAppliedDefaultQueues  
  Integer32 as alaQoSPortMaximumDefaultBandwidth  
  INTEGER as alaQoSPortMaximumDefaultBandwidthStatus  
  Integer32 as alaQoSPortAppliedMaximumDefaultBandwidth  
  INTEGER as alaQoSPortAppliedMaximumDefaultBandwidthStatus  
  Integer32 as alaQoSPortMaximumDefaultDepth  
  INTEGER as alaQoSPortMaximumDefaultDepthStatus  
  Integer32 as alaQoSPortAppliedMaximumDefaultDepth  
  INTEGER as alaQoSPortAppliedMaximumDefaultDepthStatus  
  Integer32 as alaQoSPortMaximumDefaultBuffers  
  INTEGER as alaQoSPortMaximumDefaultBuffersStatus  
  Integer32 as alaQoSPortAppliedMaximumDefaultBuffers  
  INTEGER as alaQoSPortAppliedMaximumDefaultBuffersStatus  
  INTEGER as alaQoSPortReset  
  Integer32 as alaQoSPortPhysicalBandwidth  
  Integer32 as alaQoSPortReservedBandwidth  
  Integer32 as alaQoSPortSignalledBandwidth  
  Integer32 as alaQoSPortCurrentBandwidth  
  Integer32 as alaQoSPortDefaultQidLow  
  Integer32 as alaQoSPortDefaultQidMedium  
  Integer32 as alaQoSPortDefaultQidHigh  
  Integer32 as alaQoSPortDefaultQidUrgent  
  Integer32 as alaQoSPortFloodQid  
  Integer32 as alaQoSPortQueues  
  Integer32 as alaQoSPortQueuesCreated  
  Integer32 as alaQoSPortQueuesFailed  
  Integer32 as alaQoSPortQueuesPreempted  
  RowStatus as alaQoSPortRowStatus  
  Counter64 as alaQoSPortFirPrio0EnqBytes  
  Counter64 as alaQoSPortFirPrio0DeqBytes  
  Counter64 as alaQoSPortFirPrio0EnqPkts  
  Counter64 as alaQoSPortFirPrio0DeqPkts  
  Counter64 as alaQoSPortFirPrio0QidDiscardPkts  
  Counter64 as alaQoSPortFirPrio0WredDiscardPkts  
  Counter64 as alaQoSPortFirPrio0OverflowDiscardPkts  
  Counter64 as alaQoSPortFirPrio1EnqBytes  
  Counter64 as alaQoSPortFirPrio1DeqBytes  
  Counter64 as alaQoSPortFirPrio1EnqPkts  
  Counter64 as alaQoSPortFirPrio1DeqPkts  
  Counter64 as alaQoSPortFirPrio1QidDiscardPkts  
  Counter64 as alaQoSPortFirPrio1WredDiscardPkts  
  Counter64 as alaQoSPortFirPrio1OverflowDiscardPkts  
  Counter64 as alaQoSPortFirPrio2EnqBytes  
  Counter64 as alaQoSPortFirPrio2DeqBytes  
  Counter64 as alaQoSPortFirPrio2EnqPkts  
  Counter64 as alaQoSPortFirPrio2DeqPkts  
  Counter64 as alaQoSPortFirPrio2QidDiscardPkts  
  Counter64 as alaQoSPortFirPrio2WredDiscardPkts  
  Counter64 as alaQoSPortFirPrio2OverflowDiscardPkts  
  Counter64 as alaQoSPortFirPrio3EnqBytes  
  Counter64 as alaQoSPortFirPrio3DeqBytes  
  Counter64 as alaQoSPortFirPrio3EnqPkts  
  Counter64 as alaQoSPortFirPrio3DeqPkts  
  Counter64 as alaQoSPortFirPrio3QidDiscardPkts  
  Counter64 as alaQoSPortFirPrio3WredDiscardPkts  
  Counter64 as alaQoSPortFirPrio3OverflowDiscardPkts  
  INTEGER as alaQoSPortDefaultClassification  
  Integer32 as alaQoSPortLowPriorityWeight  
  Integer32 as alaQoSPortMediumPriorityWeight  
  Integer32 as alaQoSPortHighPriorityWeight  
  Integer32 as alaQoSPortUrgentPriorityWeight  
  Integer32 as alaQoSPortMaximumBandwidth  
  INTEGER as alaQoSPortMaximumBandwidthStatus  
  Integer32 as alaQoSPortEnqueuingThresholdP0Lower  
  Integer32 as alaQoSPortEnqueuingThresholdP0Upper  
  Integer32 as alaQoSPortEnqueuingThresholdP1Lower  
  Integer32 as alaQoSPortEnqueuingThresholdP1Upper  
  Integer32 as alaQoSPortEnqueuingThresholdP2Lower  
  Integer32 as alaQoSPortEnqueuingThresholdP2Upper  
  Integer32 as alaQoSPortEnqueuingThresholdP3Lower  
  Integer32 as alaQoSPortEnqueuingThresholdP3Upper  
  INTEGER as alaQoSPortEnqueuingThresholdStatus  
  INTEGER as alaQoSPortServicingMode  
  INTEGER as alaQoSPortHighDensity  
  Integer32 as alaQoSPortFreeFFPRules  
  Integer32 as alaQoSPortUsedFFPRules  
  Integer32 as alaQoSPortFreeFFPMasks  
  Integer32 as alaQoSPortUsedFFPMasks  
  Integer32 as alaQoSPortSpoofedCount  
  Integer32 as alaQoSPortNonSpoofedCount  
  Integer32 as alaQoSPortQ4PriorityWeight  
  Integer32 as alaQoSPortQ5PriorityWeight  
  Integer32 as alaQoSPortQ6PriorityWeight  
  Integer32 as alaQoSPortQ7PriorityWeight  
  Integer32 as alaQoSPortCOS0MaximumBandwidth  
  INTEGER as alaQoSPortCOS0MaximumBandwidthStatus  
  Integer32 as alaQoSPortCOS1MaximumBandwidth  
  INTEGER as alaQoSPortCOS1MaximumBandwidthStatus  
  Integer32 as alaQoSPortCOS2MaximumBandwidth  
  INTEGER as alaQoSPortCOS2MaximumBandwidthStatus  
  Integer32 as alaQoSPortCOS3MaximumBandwidth  
  INTEGER as alaQoSPortCOS3MaximumBandwidthStatus  
  Integer32 as alaQoSPortCOS4MaximumBandwidth  
  INTEGER as alaQoSPortCOS4MaximumBandwidthStatus  
  Integer32 as alaQoSPortCOS5MaximumBandwidth  
  INTEGER as alaQoSPortCOS5MaximumBandwidthStatus  
  Integer32 as alaQoSPortCOS6MaximumBandwidth  
  INTEGER as alaQoSPortCOS6MaximumBandwidthStatus  
  Integer32 as alaQoSPortCOS7MaximumBandwidth  
  INTEGER as alaQoSPortCOS7MaximumBandwidthStatus  
  Integer32 as alaQoSPortCOS0MinimumBandwidth  
  INTEGER as alaQoSPortCOS0MinimumBandwidthStatus  
  Integer32 as alaQoSPortCOS1MinimumBandwidth  
  INTEGER as alaQoSPortCOS1MinimumBandwidthStatus  
  Integer32 as alaQoSPortCOS2MinimumBandwidth  
  INTEGER as alaQoSPortCOS2MinimumBandwidthStatus  
  Integer32 as alaQoSPortCOS3MinimumBandwidth  
  INTEGER as alaQoSPortCOS3MinimumBandwidthStatus  
  Integer32 as alaQoSPortCOS4MinimumBandwidth  
  INTEGER as alaQoSPortCOS4MinimumBandwidthStatus  
  Integer32 as alaQoSPortCOS5MinimumBandwidth  
  INTEGER as alaQoSPortCOS5MinimumBandwidthStatus  
  Integer32 as alaQoSPortCOS6MinimumBandwidth  
  INTEGER as alaQoSPortCOS6MinimumBandwidthStatus  
  Integer32 as alaQoSPortCOS7MinimumBandwidth  
  INTEGER as alaQoSPortCOS7MinimumBandwidthStatus  
  Integer32 as alaQoSPortMaximumIngBandwidth  
  INTEGER as alaQoSPortMaximumIngBandwidthStatus  
  INTEGER as alaQoSPortDEIMarking  
  INTEGER as alaQoSPortMonitor  
  INTEGER as alaQoSPortDEIMapping  

QoSQueueEntry  
SEQUENCE    
  Integer32 as alaQoSQueueId  
  Integer32 as alaQoSQueueSlot  
  Integer32 as alaQoSQueuePort  
  Integer32 as alaQoSQueuePortId  
  INTEGER as alaQoSQueueType  
  Integer32 as alaQoSQueuePriority  
  Integer32 as alaQoSQueueMinimumBandwidth  
  Integer32 as alaQoSQueueMaximumBandwidth  
  Integer32 as alaQoSQueueAverageBandwidth  
  Integer32 as alaQoSQueueMinimumDepth  
  Integer32 as alaQoSQueueMaximumDepth  
  Integer32 as alaQoSQueueMaximumBuffers  
  Integer32 as alaQoSQueue8021p  
  Integer32 as alaQoSQueuePacketsSent  
  Integer32 as alaQoSQueuePacketsDropped  
  Integer32 as alaQoSQueueMaxLength  
  Integer32 as alaQoSQueueAverageLength  
  Integer32 as alaQoSQueueCurrentLength  
  DisplayString as alaQoSQueueAction  

QoSSlotEntry  
SEQUENCE    
  Integer32 as alaQoSSlotSlot  
  Integer32 as alaQoSSlotSlice  
  INTEGER as alaQoSSlotType  
  Integer32 as alaQoSSlotMaxBuffers  
  Integer32 as alaQoSSlotFreeBuffers1  
  Integer32 as alaQoSSlotFreeBuffers2  
  Integer32 as alaQoSSlotThreshold1Low  
  Integer32 as alaQoSSlotThreshold1Medium  
  Integer32 as alaQoSSlotThreshold1High  
  Integer32 as alaQoSSlotThreshold1Urgent  
  Integer32 as alaQoSSlotThreshold2Low  
  Integer32 as alaQoSSlotThreshold2Medium  
  Integer32 as alaQoSSlotThreshold2High  
  Integer32 as alaQoSSlotThreshold2Urgent  
  Integer32 as alaQoSSlotBuffersDenied  
  Integer32 as alaQoSSlotBuffersDeniedAverage  
  Integer32 as alaQoSSlotBuffersDropped  
  Integer32 as alaQoSSlotBuffersDroppedAverage  
  Integer32 as alaQoSSlotWredThresholdP0Lower  
  Integer32 as alaQoSSlotWredThresholdP0Upper  
  Integer32 as alaQoSSlotWredThresholdP1Lower  
  Integer32 as alaQoSSlotWredThresholdP1Upper  
  Integer32 as alaQoSSlotWredThresholdP2Lower  
  Integer32 as alaQoSSlotWredThresholdP2Upper  
  Integer32 as alaQoSSlotWredThresholdP3Lower  
  Integer32 as alaQoSSlotWredThresholdP3Upper  
  Integer32 as alaQoSSlotWredAverageCounterWeight  
  INTEGER as alaQoSSlotWredThresholdStatus  
  INTEGER as alaQoSSlotCbqThresholdMode  
  Integer32 as alaQoSSlotCbqThresholdP1  
  Integer32 as alaQoSSlotCbqThresholdP2  
  Integer32 as alaQoSSlotCbqThresholdP3  
  INTEGER as alaQoSSlotHighDensity  

QoSSlotProtocolEntry  
SEQUENCE    
  INTEGER as alaQoSSlotProtocolId  
  Integer32 as alaQoSSlotProtocolEthertype  
  Integer32 as alaQoSSlotProtocolDsap  
  Integer32 as alaQoSSlotProtocolSsap  
  INTEGER as alaQoSSlotProtocol8023Enabled  
  INTEGER as alaQoSSlotProtocolType  
  RowStatus as alaQoSSlotProtocolRowStatus  

QoSPortProtocolEntry  
SEQUENCE    
  INTEGER as alaQoSPortProtocolId  
  INTEGER as alaQoSPortProtocolClassification  
  Integer32 as alaQoSPortProtocolPriorityP0  
  Integer32 as alaQoSPortProtocolPriorityP1  
  Integer32 as alaQoSPortProtocolPriorityP2  
  Integer32 as alaQoSPortProtocolPriorityP3  
  Integer32 as alaQoSPortProtocolPriorityP4  
  Integer32 as alaQoSPortProtocolPriorityP5  
  Integer32 as alaQoSPortProtocolPriorityP6  
  Integer32 as alaQoSPortProtocolPriorityP7  
  RowStatus as alaQoSPortProtocolRowStatus  

QoSSlotDscpEntry  
SEQUENCE    
  Integer32 as alaQoSSlotDscpIndex  
  Integer32 as alaQoSSlotDscpPriority  

QoSSlotPcamEntry  
SEQUENCE    
  Integer32 as alaQoSSlotPcamId  
  Integer32 as alaQoSSlotPcamEthertype  
  Integer32 as alaQoSSlotPcamDsap  
  Integer32 as alaQoSSlotPcamSsap  
  INTEGER as alaQoSSlotPcam8023Enabled  
  Integer32 as alaQoSSlotPcamProtocolNumber  
  INTEGER as alaQoSSlotPcamEnableEntry  
  INTEGER as alaQoSSlotPcamEnable8023  
  INTEGER as alaQoSSlotPcamEnableDsap  
  INTEGER as alaQoSSlotPcamEnableSsap  
  INTEGER as alaQoSSlotPcamEnableEthertype  

QoSPortPdiEntry  
SEQUENCE    
  Integer32 as alaQoSPortPdiId  
  Integer32 as alaQoSPortPdiPriorityType  
  Integer32 as alaQoSPortPdiPriorityP0  
  Integer32 as alaQoSPortPdiPriorityP1  
  Integer32 as alaQoSPortPdiPriorityP2  
  Integer32 as alaQoSPortPdiPriorityP3  
  Integer32 as alaQoSPortPdiPriorityP4  
  Integer32 as alaQoSPortPdiPriorityP5  
  Integer32 as alaQoSPortPdiPriorityP6  
  Integer32 as alaQoSPortPdiPriorityP7  

QoSValidityPeriodEntry  
SEQUENCE    
  DisplayString as alaQoSValidityPeriodName  
  INTEGER as alaQoSValidityPeriodSource  
  Integer32 as alaQoSValidityPeriodDays  
  INTEGER as alaQoSValidityPeriodDaysStatus  
  Integer32 as alaQoSValidityPeriodMonths  
  INTEGER as alaQoSValidityPeriodMonthsStatus  
  DisplayString as alaQoSValidityPeriodHour  
  INTEGER as alaQoSValidityPeriodHourStatus  
  DisplayString as alaQoSValidityPeriodEndHour  
  DisplayString as alaQoSValidityPeriodInterval  
  INTEGER as alaQoSValidityPeriodIntervalStatus  
  DisplayString as alaQoSValidityPeriodEndInterval  
  RowStatus as alaQoSValidityPeriodRowStatus  

QoSAppliedValidityPeriodEntry  
SEQUENCE    
  DisplayString as alaQoSAppliedValidityPeriodName  
  INTEGER as alaQoSAppliedValidityPeriodSource  
  Integer32 as alaQoSAppliedValidityPeriodDays  
  INTEGER as alaQoSAppliedValidityPeriodDaysStatus  
  Integer32 as alaQoSAppliedValidityPeriodMonths  
  INTEGER as alaQoSAppliedValidityPeriodMonthsStatus  
  DisplayString as alaQoSAppliedValidityPeriodHour  
  INTEGER as alaQoSAppliedValidityPeriodHourStatus  
  DisplayString as alaQoSAppliedValidityPeriodEndHour  
  DisplayString as alaQoSAppliedValidityPeriodInterval  
  INTEGER as alaQoSAppliedValidityPeriodIntervalStatus  
  DisplayString as alaQoSAppliedValidityPeriodEndInterval  
  RowStatus as alaQoSAppliedValidityPeriodRowStatus  

QoSImportEntry  
SEQUENCE    
  Integer32 as alaQoSImportIndex  
  DisplayString as alaQoSImportText  
  Integer32 as alaQoSImportPrecedence  
  DisplayString as alaQoSImportPrefix  
  Integer32 as alaQoSImportSlot  
  Integer32 as alaQoSImportPort  
  Integer32 as alaQoSImportPortend  
  DisplayString as alaQoSImportPortgroup  
  RowStatus as alaQoSImportRowStatus  

QoSAppliedImportEntry  
SEQUENCE    
  Integer32 as alaQoSAppliedImportIndex  
  DisplayString as alaQoSAppliedImportText  
  Integer32 as alaQoSAppliedImportPrecedence  
  DisplayString as alaQoSAppliedImportPrefix  
  Integer32 as alaQoSAppliedImportSlot  
  Integer32 as alaQoSAppliedImportPort  
  Integer32 as alaQoSAppliedImportPortend  
  DisplayString as alaQoSAppliedImportPortgroup  
  RowStatus as alaQoSAppliedImportRowStatus  

QoSRuleGroupsEntry  
SEQUENCE    
  DisplayString as alaQoSRuleGroupsName  
  INTEGER as alaQoSRuleGroupsSource  
  INTEGER as alaQoSRuleGroupsType  
  INTEGER as alaQoSRuleGroupsEnabled  
  RowStatus as alaQoSRuleGroupsStatus  

QoSAppliedRuleGroupsEntry  
SEQUENCE    
  DisplayString as alaQoSAppliedRuleGroupsName  
  INTEGER as alaQoSAppliedRuleGroupsSource  
  INTEGER as alaQoSAppliedRuleGroupsType  
  INTEGER as alaQoSAppliedRuleGroupsEnabled  
  RowStatus as alaQoSAppliedRuleGroupsStatus  

QoSRuleGroupEntry  
SEQUENCE    
  DisplayString as alaQoSRuleGroupRuleName  
  Counter32 as alaQoSRuleGroupMatches  
  INTEGER as alaQoSRuleGroupCountType  
  Counter64 as alaQoSRuleGroupPacketCount  
  Counter64 as alaQoSRuleGroupByteCount  
  RowStatus as alaQoSRuleGroupStatus  

QoSAppliedRuleGroupEntry  
SEQUENCE    
  DisplayString as alaQoSAppliedRuleGroupRuleName  
  Counter32 as alaQoSAppliedRuleGroupMatches  
  INTEGER as alaQoSAppliedRuleGroupCountType  
  Counter64 as alaQoSAppliedRuleGroupPacketCount  
  Counter64 as alaQoSAppliedRuleGroupByteCount  
  RowStatus as alaQoSAppliedRuleGroupStatus  

QoSVlanGroupsEntry  
SEQUENCE    
  DisplayString as alaQoSVlanGroupsName  
  INTEGER as alaQoSVlanGroupsSource  
  RowStatus as alaQoSVlanGroupsStatus  

QoSAppliedVlanGroupsEntry  
SEQUENCE    
  DisplayString as alaQoSAppliedVlanGroupsName  
  INTEGER as alaQoSAppliedVlanGroupsSource  
  RowStatus as alaQoSAppliedVlanGroupsStatus  

QoSVlanGroupEntry  
SEQUENCE    
  Integer32 as alaQoSVlanGroupVlan  
  Integer32 as alaQoSVlanGroupVlanEnd  
  RowStatus as alaQoSVlanGroupStatus  

QoSAppliedVlanGroupEntry  
SEQUENCE    
  Integer32 as alaQoSAppliedVlanGroupVlan  
  Integer32 as alaQoSAppliedVlanGroupVlanEnd  
  RowStatus as alaQoSAppliedVlanGroupStatus  

QoSHwLoopbackProfileEntry  
SEQUENCE    
  DisplayString as alaQoSHwLoopbackProfileName  
  MacAddress as alaQoSHwLoopbackSourceMac  
  MacAddress as alaQoSHwLoopbackDestinationMac  
  Integer32 as alaQoSHwLoopbackVlan  
  InterfaceIndex as alaQoSHwLoopbackPort  
  INTEGER as alaQoSHwLoopbackType  
  INTEGER as alaQoSHwLoopbackProfileStatus  
  RowStatus as alaQoSHwLoopbackProfileRowStatus