APPIAN-LPORT-DS1-MIB

File: APPIAN-LPORT-DS1-MIB.mib (89040 bytes)

Imported modules

APPIAN-SMI-MIB APPIAN-CHASSIS-MIB SNMPv2-SMI
SNMPv2-TC PerfHist-TC-MIB

Imported symbols

acLport AcAdminStatus AcNodeId
acChassisCurrentTime acChassisRingId MODULE-IDENTITY
OBJECT-TYPE NOTIFICATION-TYPE DisplayString
TimeStamp TruthValue PerfIntervalCount

Defined Objects

acLogicalDs1 1.3.6.1.4.1.2785.2.4.2
The MIB module to describe the Appian Logical DS1 interfaces objects.
MODULE-IDENTITY    

acLogicalDs1Traps 1.3.6.1.4.1.2785.2.4.2.0
OBJECT IDENTIFIER    

acLogicalDs1LineStatusChangeTrap 1.3.6.1.4.1.2785.2.4.2.0.1
An acLogcialDs1LineStatusChange trap is sent when the value of an instance acLogicalDs1ConfigLineStatus changes. It can be utilized by an NMS to trigger polls.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ConfigNodeId  
  acLogicalDs1ConfigIndex  
  acLogicalDs1ConfigLineStatus  
  acLogicalDs1ConfigLineStatusLastChange  

acLogicalDs1StatsResetTrap 1.3.6.1.4.1.2785.2.4.2.0.2
The Logical Ds1 statistics for this interface have been reset to zero (0) which may effect long term trending functions monitoring this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ConfigNodeId  
  acLogicalDs1ConfigIndex  

acLogicalDs1CfgErrorTrap 1.3.6.1.4.1.2785.2.4.2.0.3
A configuration request to the Logical Ds1 configuration table for an interface has been detected as invalid or corrupt.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ConfigNodeId  
  acLogicalDs1ConfigIndex  

acLogicalDs1LinkDownTrap 1.3.6.1.4.1.2785.2.4.2.0.4
The link for this ds1 interface has obtained sync.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ConfigNodeId  
  acLogicalDs1ConfigIndex  

acLogicalDs1LinkUpTrap 1.3.6.1.4.1.2785.2.4.2.0.5
The link for this ds1 interface has lost sync.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ConfigNodeId  
  acLogicalDs1ConfigIndex  

acLogicalDs1ExceededThresholdNEIntervalESsTrap 1.3.6.1.4.1.2785.2.4.2.0.7
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdNEIntervalSESsTrap 1.3.6.1.4.1.2785.2.4.2.0.8
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdNEIntervalSEFSsTrap 1.3.6.1.4.1.2785.2.4.2.0.9
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdNEIntervalUASsTrap 1.3.6.1.4.1.2785.2.4.2.0.10
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdNEIntervalCSSsTrap 1.3.6.1.4.1.2785.2.4.2.0.11
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdNEIntervalPCVsTrap 1.3.6.1.4.1.2785.2.4.2.0.12
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdNEIntervalLESsTrap 1.3.6.1.4.1.2785.2.4.2.0.13
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdNEIntervalBESsTrap 1.3.6.1.4.1.2785.2.4.2.0.14
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdNEIntervalDMsTrap 1.3.6.1.4.1.2785.2.4.2.0.15
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdNEIntervalLCVsTrap 1.3.6.1.4.1.2785.2.4.2.0.16
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdNEDayESsTrap 1.3.6.1.4.1.2785.2.4.2.0.17
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdNEDaySESsTrap 1.3.6.1.4.1.2785.2.4.2.0.18
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdNEDaySEFSsTrap 1.3.6.1.4.1.2785.2.4.2.0.19
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdNEDayUASsTrap 1.3.6.1.4.1.2785.2.4.2.0.20
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdNEDayCSSsTrap 1.3.6.1.4.1.2785.2.4.2.0.21
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdNEDayPCVsTrap 1.3.6.1.4.1.2785.2.4.2.0.22
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdNEDayLESsTrap 1.3.6.1.4.1.2785.2.4.2.0.23
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdNEDayBESsTrap 1.3.6.1.4.1.2785.2.4.2.0.24
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdNEDayDMsTrap 1.3.6.1.4.1.2785.2.4.2.0.25
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdNEDayLCVsTrap 1.3.6.1.4.1.2785.2.4.2.0.26
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdFEIntervalESsTrap 1.3.6.1.4.1.2785.2.4.2.0.27
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdFEIntervalSESsTrap 1.3.6.1.4.1.2785.2.4.2.0.28
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdFEIntervalSEFSsTrap 1.3.6.1.4.1.2785.2.4.2.0.29
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdFEIntervalUASsTrap 1.3.6.1.4.1.2785.2.4.2.0.30
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdFEIntervalCSSsTrap 1.3.6.1.4.1.2785.2.4.2.0.31
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdFEIntervalLESsTrap 1.3.6.1.4.1.2785.2.4.2.0.32
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdFEIntervalPCVsTrap 1.3.6.1.4.1.2785.2.4.2.0.33
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdFEIntervalBESsTrap 1.3.6.1.4.1.2785.2.4.2.0.34
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdFEIntervalDMsTrap 1.3.6.1.4.1.2785.2.4.2.0.35
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdFEDayESsTrap 1.3.6.1.4.1.2785.2.4.2.0.36
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdFEDaySESsTrap 1.3.6.1.4.1.2785.2.4.2.0.37
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdFEDaySEFSsTrap 1.3.6.1.4.1.2785.2.4.2.0.38
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdFEDayUASsTrap 1.3.6.1.4.1.2785.2.4.2.0.39
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdFEDayCSSsTrap 1.3.6.1.4.1.2785.2.4.2.0.40
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdFEDayLESsTrap 1.3.6.1.4.1.2785.2.4.2.0.41
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdFEDayPCVsTrap 1.3.6.1.4.1.2785.2.4.2.0.42
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdFEDayBESsTrap 1.3.6.1.4.1.2785.2.4.2.0.43
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ExceededThresholdFEDayDMsTrap 1.3.6.1.4.1.2785.2.4.2.0.44
The specified threshold for this interface has been exceeded.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acLogicalDs1ThresholdNodeId  
  acLogicalDs1ThresholdIndex  

acLogicalDs1ConfigTable 1.3.6.1.4.1.2785.2.4.2.1
The Appian Logical DS1 Configuration table. This table is created by the EMS/CLI.
OBJECT-TYPE    
  SEQUENCE OF  
    AcLogicalDs1ConfigEntry

acLogicalDs1ConfigEntry 1.3.6.1.4.1.2785.2.4.2.1.1
An entry in the Appian Logical DS1 Configuration table.
OBJECT-TYPE    
  AcLogicalDs1ConfigEntry  

acLogicalDs1ConfigNodeId 1.3.6.1.4.1.2785.2.4.2.1.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acLogicalDs1ConfigIndex 1.3.6.1.4.1.2785.2.4.2.1.1.2
This value for this object is equal to the value of index from the Time Slot Table that this DS1 corresponds. The value can be a number between 1 and 65535 (64k - 1).
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ConfigAdminStatus 1.3.6.1.4.1.2785.2.4.2.1.1.3
Appian Administrative Status attribute used to set the provisioning state as either activate(1), inactivate(2) or delete(3). Refer to the Appian-SMI.mib file for additional information.
OBJECT-TYPE    
  AcAdminStatus  

acLogicalDs1ConfigTimeElapsedInterval 1.3.6.1.4.1.2785.2.4.2.1.1.4
The number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
OBJECT-TYPE    
  INTEGER 0..899  

acLogicalDs1ConfigValidIntervals 1.3.6.1.4.1.2785.2.4.2.1.1.5
The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
OBJECT-TYPE    
  INTEGER 0..96  

acLogicalDs1ConfigTimeElapsedDay 1.3.6.1.4.1.2785.2.4.2.1.1.6
The number of seconds that have elapsed since the beginning of the near end current day error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current day interval exceeds the maximum value, the agent will return the maximum value.
OBJECT-TYPE    
  INTEGER 0..86399  

acLogicalDs1ConfigValidDays 1.3.6.1.4.1.2785.2.4.2.1.1.7
The number of previous near end days for which data was collected. The value will be 30 unless the interface was brought online within the last 30 days, in which case the value will be the number of complete 24 hr near end days since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
OBJECT-TYPE    
  INTEGER 0..30  

acLogicalDs1ConfigTimeElapsedFarEndInterval 1.3.6.1.4.1.2785.2.4.2.1.1.8
The number of seconds that have elapsed since the beginning of the far end current error-measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
OBJECT-TYPE    
  INTEGER 0..899  

acLogicalDs1ConfigValidFarEndIntervals 1.3.6.1.4.1.2785.2.4.2.1.1.9
The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
OBJECT-TYPE    
  INTEGER 0..96  

acLogicalDs1ConfigTimeElapsedFarEndDay 1.3.6.1.4.1.2785.2.4.2.1.1.10
The number of seconds that have elapsed since the beginning of the far end current day error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current day interval exceeds the maximum value, the agent will return the maximum value.
OBJECT-TYPE    
  INTEGER 0..86399  

acLogicalDs1ConfigValidFarEndDays 1.3.6.1.4.1.2785.2.4.2.1.1.11
The number of previous near end days for which data was collected. The value will be 30 unless the far/near end interface was brought online within the last 30 days, in which case the value will be the number of complete 24 hr far end days since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
OBJECT-TYPE    
  INTEGER 0..30  

acLogicalDs1ConfigSendCode 1.3.6.1.4.1.2785.2.4.2.1.1.12
This variable indicates what type of code is being sent across the DS1 interface by the device. Setting this variable causes the interface to send the code requested. The values mean: ds1SendNoCode sending looped or normal data ds1SendLineCode sending a request for a line loopback ds1SendPayloadCode sending a request for a payload loopback ds1SendResetCode sending a loopback termination request ds1SendQRS sending a Quasi-Random Signal (QRS) test pattern ds1Send511Pattern sending a 511 bit fixed test pattern ds1Send3in24Pattern sending a fixed test pattern of 3 bits set in 24 ds1SendOtherTestPattern sending a test pattern other than those described by this object
OBJECT-TYPE    
  INTEGER ds1SendNoCode(1), ds1SendLineCode(2), ds1SendPayloadCode(3), ds1SendResetCode(4), ds1SendQRS(5), ds1Send511Pattern(6), ds1Send3in24Pattern(7), ds1SendOtherTestPattern(8)  

acLogicalDs1ConfigCircuitIdentifier 1.3.6.1.4.1.2785.2.4.2.1.1.13
This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

acLogicalDs1ConfigLoopbackConfig 1.3.6.1.4.1.2785.2.4.2.1.1.14
This variable represents the desired loopback configuration of the DS1 interface. Agents supporting read/write access should return inconsistentValue in response to a requested loopback state that the interface does not support. The values mean: ds1NoLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value. ds1PayloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for retransmission after it has passed through the device's framing function. ds1LineLoop The received signal at this interface does not go through the device (minimum penetration) but is looped back out. ds1OtherLoop Loopbacks that are not defined here. ds1InwardLoop The transmitted signal at this interface is looped back and received by the same interface. What is transmitted onto the line is product dependent. ds1DualLoop Both ds1LineLoop and ds1InwardLoop will be active simultaneously.
OBJECT-TYPE    
  INTEGER ds1NoLoop(1), ds1PayloadLoop(2), ds1LineLoop(3), ds1OtherLoop(4), ds1InwardLoop(5), ds1DualLoop(6)  

acLogicalDs1ConfigLineStatus 1.3.6.1.4.1.2785.2.4.2.1.1.15
This variable indicates the Line Status of the interface. It contains loopback, failure, received 'alarm' and transmitted 'alarms information. The ds1LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) and a LoopbackState simultaneously. ds1NoAlarm must be set if and only if no other flag is set. If the ds1loopbackState bit is set, the loopback in effect can be determined from the ds1loopbackConfig object. The various bit positions are: 1 ds1NoAlarm No alarm present 2 ds1RcvFarEndLOF Far end LOF (a.k.a., Yellow Alarm) 4 ds1XmtFarEndLOF Near end sending LOF Indication 8 ds1RcvAIS Far end sending AIS 16 ds1XmtAIS Near end sending AIS 32 ds1LossOfFrame Near end LOF (a.k.a., Red Alarm) 64 dsLossOfSignal Near end Loss Of Signal 128 ds1LoopbackState Near end is looped 256 ds1RcvFarEndLOMF Far End Sending TS16 LOMF 512 ds1XmtFarEndLOMF Near End Sending TS16 LOMF 1024 ds1RcvTestCode Near End detects a test code 2048 ds1OtherFailure any line status not defined here 4096 ds1UnavailSigState Near End in Unavailable Signal State 16384 ds1NetEquipOOS Carrier Equipment Out of Service
OBJECT-TYPE    
  INTEGER 1..131071  

acLogicalDs1ConfigTransmitClockSource 1.3.6.1.4.1.2785.2.4.2.1.1.16
The source of Transmit Clock. For the logicalDs1, the timing will be throughTiming. This is not currently a configurable parameter. The options are: 'loopTiming' indicates that the recovered receive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used or when an external clock is attached to the box containing the interface. 'throughTiming' indicates that recovered receive clock from another interface is used as the transmit clock.
OBJECT-TYPE    
  INTEGER loopTiming(1), localTiming(2), throughTiming(3)  

acLogicalDs1ConfigInvalidIntervals 1.3.6.1.4.1.2785.2.4.2.1.1.17
The number of intervals in the range from 0 to ds1ValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
OBJECT-TYPE    
  INTEGER 0..96  

acLogicalDs1ConfigInvalidDays 1.3.6.1.4.1.2785.2.4.2.1.1.18
The number of days in the range from 0 to ds1ValidDays for which no data is available. This object will typically be zero except in cases where the data for some days are not available (e.g., in proxy situations).
OBJECT-TYPE    
  INTEGER 0..30  

acLogicalDs1ConfigInvalidFarEndIntervals 1.3.6.1.4.1.2785.2.4.2.1.1.19
The number of intervals in the range from 0 to acLogicalDs1ConfigValidFarEndIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
OBJECT-TYPE    
  INTEGER 0..96  

acLogicalDs1ConfigInvalidFarEndDays 1.3.6.1.4.1.2785.2.4.2.1.1.20
The number of days in the range from 0 to acLogicalDs1ConfigValidFarEndDays for which no data is available. This object will typically be zero except in cases where the data for some days are not available (e.g., in proxy situations).
OBJECT-TYPE    
  INTEGER 0..30  

acLogicalDs1ConfigLineStatusLastChange 1.3.6.1.4.1.2785.2.4.2.1.1.21
The value of MIB II's sysUpTime object at the time this DS1 entered its current line status state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a zero value.
OBJECT-TYPE    
  TimeStamp  

acLogicalDs1ConfigLineStatusChangeTrapEnable 1.3.6.1.4.1.2785.2.4.2.1.1.22
Indicates whether acLogicalDs1ConfigLineStatusChange traps should be generated for this interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

acLogicalDs1ConfigLoopbackStatus 1.3.6.1.4.1.2785.2.4.2.1.1.23
This variable represents the current state of the loopback on the DS1 interface. It contains information about loopbacks established by a manager and remotely from the far end. The ds1LoopbackStatus is a bit map represented as a sum, therefore is can represent multiple loopbacks simultaneously. The various bit positions are: 1 ds1NoLoopback 2 ds1NearEndPayloadLoopback 4 ds1NearEndLineLoopback 8 ds1NearEndOtherLoopback 16 ds1NearEndInwardLoopback 32 ds1FarEndPayloadLoopback 64 ds1FarEndLineLoopback
OBJECT-TYPE    
  INTEGER 1..127  

acLogicalDs1ConfigVTNumber 1.3.6.1.4.1.2785.2.4.2.1.1.24
This variable represents the virtual tributary number in the STS-1 frame that this DS1 corresponds to.
OBJECT-TYPE    
  INTEGER 1..28  

acLogicalDs1IntervalTable 1.3.6.1.4.1.2785.2.4.2.2
The Appian DS1 Interval Table contains various statistics collected by each DS1 Interface over the previous 24 hours of operation as well as over the current period. The past 24 hours are broken into 96 completed 15 minute intervals. The first row in this table (identified by acLogicalDs1IntervalNumber=1) represents the current interval statistics. The next 96 rows in this table (represented by acLogicalDs1IntervalNumber=2..97) represents one of the past 15 minute intervals. The final row (identified by acLogicalDs1IntervalNumber=98) is the total of all the past intervals (2..97). This table is created automatically.
OBJECT-TYPE    
  SEQUENCE OF  
    AcLogicalDs1IntervalEntry

acLogicalDs1IntervalEntry 1.3.6.1.4.1.2785.2.4.2.2.1
An entry in the Appian DS1 Interval table.
OBJECT-TYPE    
  AcLogicalDs1IntervalEntry  

acLogicalDs1IntervalNodeId 1.3.6.1.4.1.2785.2.4.2.2.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acLogicalDs1IntervalIndex 1.3.6.1.4.1.2785.2.4.2.2.1.2
The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a acLogicalDs1Index object instance.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1IntervalNumber 1.3.6.1.4.1.2785.2.4.2.2.1.3
A number between 1 and 98, where 1 is the current 15 minute interval in progress, 2 is the most recently completed 15 minute interval and 97 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 2, and 98 is the total (sum) of all of the previous completed intervals (2..97).
OBJECT-TYPE    
  INTEGER 1..98  

acLogicalDs1IntervalValidStats 1.3.6.1.4.1.2785.2.4.2.2.1.4
This variable indicates if the data for this interval is valid. For acLogicalDs1IntervalNumber=98, this value will only be true if all data is valid for intervals 2..97.
OBJECT-TYPE    
  TruthValue  

acLogicalDs1IntervalResetStats 1.3.6.1.4.1.2785.2.4.2.2.1.5
This variable allows the data for the current interval (acLogicalDs1IntervalNumber = 1) to be reset. The acLogicalDs1IntervalValidStats will be set to False after the reset for the current interval. This field has no effect on acLogicalDs1IntervalNumber 2..98. This field will always show a value of False when read.
OBJECT-TYPE    
  TruthValue  

acLogicalDs1IntervalESs 1.3.6.1.4.1.2785.2.4.2.2.1.6
The number of Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1IntervalSESs 1.3.6.1.4.1.2785.2.4.2.2.1.7
The number of Severely Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1IntervalSEFSs 1.3.6.1.4.1.2785.2.4.2.2.1.8
The number of Severely Errored Framing Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1IntervalUASs 1.3.6.1.4.1.2785.2.4.2.2.1.9
The number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1IntervalCSSs 1.3.6.1.4.1.2785.2.4.2.2.1.10
The number of Controlled Slip Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1IntervalPCVs 1.3.6.1.4.1.2785.2.4.2.2.1.11
The number of Path Coding Violations.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1IntervalLESs 1.3.6.1.4.1.2785.2.4.2.2.1.12
The number of Line Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1IntervalBESs 1.3.6.1.4.1.2785.2.4.2.2.1.13
The number of Bursty Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1IntervalDMs 1.3.6.1.4.1.2785.2.4.2.2.1.14
The number of Degraded Minutes.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1IntervalLCVs 1.3.6.1.4.1.2785.2.4.2.2.1.15
The number of Line Code Violations.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1DayTable 1.3.6.1.4.1.2785.2.4.2.3
The Appian Logical DS1 Day Table contains various statistics collected by each DS1 Interface over the previous 30 days of operation as well as over the current day period. The first row in this table (identified by acLogicalDs1DayNumber=1) represents the current day statistics. The next 30 rows in this table (represented by acLogicalDs1DayNumber=2..31) represents one of the past 24 hr periods (day). This table is created automatically.
OBJECT-TYPE    
  SEQUENCE OF  
    AcLogicalDs1DayEntry

acLogicalDs1DayEntry 1.3.6.1.4.1.2785.2.4.2.3.1
An entry in the Appian DS1 Day table.
OBJECT-TYPE    
  AcLogicalDs1DayEntry  

acLogicalDs1DayNodeId 1.3.6.1.4.1.2785.2.4.2.3.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acLogicalDs1DayIndex 1.3.6.1.4.1.2785.2.4.2.3.1.2
The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a acLogicalDs1Index object instance.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1DayNumber 1.3.6.1.4.1.2785.2.4.2.3.1.3
A number between 1 and 31, where 1 is the current 24 hour interval in progress (day), 2 is the most recently completed 24 hour interval and 31 is the 24 hour interval completed 29 days prior to interval 1.
OBJECT-TYPE    
  INTEGER 1..31  

acLogicalDs1DayValidStats 1.3.6.1.4.1.2785.2.4.2.3.1.4
This variable indicates if the data for this interval is valid.
OBJECT-TYPE    
  TruthValue  

acLogicalDs1DayResetStats 1.3.6.1.4.1.2785.2.4.2.3.1.5
This variable allows the data for the current day (acLogicalDs1DayIndex = 1) to be reset. The acLogicalDs1DayValidStats will be set to False after the reset for the current day. This field has no effect on acLogicalDs1DayIndex 2..31. This field will always show a value of False when read.
OBJECT-TYPE    
  TruthValue  

acLogicalDs1DayESs 1.3.6.1.4.1.2785.2.4.2.3.1.6
The number of Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1DaySESs 1.3.6.1.4.1.2785.2.4.2.3.1.7
The number of Severely Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1DaySEFSs 1.3.6.1.4.1.2785.2.4.2.3.1.8
The number of Severely Errored Framing Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1DayUASs 1.3.6.1.4.1.2785.2.4.2.3.1.9
The number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1DayCSSs 1.3.6.1.4.1.2785.2.4.2.3.1.10
The number of Controlled Slip Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1DayPCVs 1.3.6.1.4.1.2785.2.4.2.3.1.11
The number of Path Coding Violations.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1DayLESs 1.3.6.1.4.1.2785.2.4.2.3.1.12
The number of Line Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1DayBESs 1.3.6.1.4.1.2785.2.4.2.3.1.13
The number of Bursty Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1DayDMs 1.3.6.1.4.1.2785.2.4.2.3.1.14
The number of Degraded Minutes.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1DayLCVs 1.3.6.1.4.1.2785.2.4.2.3.1.15
The number of Line Code Violations.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1FarEndIntervalTable 1.3.6.1.4.1.2785.2.4.2.4
The DS1 Logical Far End Interval Table contains various statistics collected by each DS1 interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals. Each row in this table represents one such interval (identified by acLogicalDs1FarEndIntervalNumber) for one specific instance (identified by acLogicalDs1FarEndIntervalIndex). This table is created automatically.
OBJECT-TYPE    
  SEQUENCE OF  
    AcLogicalDs1FarEndIntervalEntry

acLogicalDs1FarEndIntervalEntry 1.3.6.1.4.1.2785.2.4.2.4.1
An entry in the DS1 Far End Interval table.
OBJECT-TYPE    
  AcLogicalDs1FarEndIntervalEntry  

acLogicalDs1FarEndIntervalNodeId 1.3.6.1.4.1.2785.2.4.2.4.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acLogicalDs1FarEndIntervalIndex 1.3.6.1.4.1.2785.2.4.2.4.1.2
The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is identical to the interface identified by the same value of acLogicalDs1Index.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1FarEndIntervalNumber 1.3.6.1.4.1.2785.2.4.2.4.1.3
A number between 1 and 98, where 1 is current 15 minute interval in progress, 2 is the most recently completed 15 minute interval and 97 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 2, and 98 is the total of intervals 2..97 (sum).
OBJECT-TYPE    
  INTEGER 1..98  

acLogicalDs1FarEndIntervalValidStats 1.3.6.1.4.1.2785.2.4.2.4.1.4
This variable indicates if the data for this interval is valid. For acLogicalDs1FarEndIntervalNumber=98, this value will only be true if all data is valid for intervals 2..97.
OBJECT-TYPE    
  TruthValue  

acLogicalDs1FarEndIntervalResetStats 1.3.6.1.4.1.2785.2.4.2.4.1.5
This variable allows the data for the current interval (acLogicalDs1FarEndIntervalNumber = 1) to be reset. The acLogicalDs1FarEndIntervalValidStats will be set to False after the reset for the current interval. This field has no effect on acLogicalDs1FarEndIntervalNumber 2..98. This field will always show a value of false when read.
OBJECT-TYPE    
  TruthValue  

acLogicalDs1FarEndIntervalESs 1.3.6.1.4.1.2785.2.4.2.4.1.6
The number of Far End Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1FarEndIntervalSESs 1.3.6.1.4.1.2785.2.4.2.4.1.7
The number of Far End Severely Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1FarEndIntervalSEFSs 1.3.6.1.4.1.2785.2.4.2.4.1.8
The number of Far End Severely Errored Framing Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1FarEndIntervalUASs 1.3.6.1.4.1.2785.2.4.2.4.1.9
The number of Unavailable Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1FarEndIntervalCSSs 1.3.6.1.4.1.2785.2.4.2.4.1.10
The number of Far End Controlled Slip Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1FarEndIntervalLESs 1.3.6.1.4.1.2785.2.4.2.4.1.11
The number of Far End Line Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1FarEndIntervalPCVs 1.3.6.1.4.1.2785.2.4.2.4.1.12
The number of Far End Path Coding Violations.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1FarEndIntervalBESs 1.3.6.1.4.1.2785.2.4.2.4.1.13
The number of Far End Bursty Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1FarEndIntervalDMs 1.3.6.1.4.1.2785.2.4.2.4.1.14
The number of Far End Degraded Minutes.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1FarEndDayTable 1.3.6.1.4.1.2785.2.4.2.5
The DS1 Logical Far End Day Table contains various statistics collected by each DS1 interface over the previous 30 days of operation. Each row in this table represents a one day interval (identified by acLogicalDs1FarEndDayNumber). This table is created automatically.
OBJECT-TYPE    
  SEQUENCE OF  
    AcLogicalDs1FarEndDayEntry

acLogicalDs1FarEndDayEntry 1.3.6.1.4.1.2785.2.4.2.5.1
An entry in the DS1 Far End Day table.
OBJECT-TYPE    
  AcLogicalDs1FarEndDayEntry  

acLogicalDs1FarEndDayNodeId 1.3.6.1.4.1.2785.2.4.2.5.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acLogicalDs1FarEndDayIndex 1.3.6.1.4.1.2785.2.4.2.5.1.2
The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is identical to the interface identified by the same value of acLogicalDs1Index.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1FarEndDayNumber 1.3.6.1.4.1.2785.2.4.2.5.1.3
A number between 1 and 31, where 1 is current 24 hour day interval in progress, 2 is the most recently completed 24 hour day interval and 31 is the 24 hour day interval completed 29 days prior to interval 2.
OBJECT-TYPE    
  INTEGER 1..31  

acLogicalDs1FarEndDayValidStats 1.3.6.1.4.1.2785.2.4.2.5.1.4
This variable indicates if the data for this interval is valid.
OBJECT-TYPE    
  TruthValue  

acLogicalDs1FarEndDayResetStats 1.3.6.1.4.1.2785.2.4.2.5.1.5
This variable allows the data for the current day (acLogicalDs1FarEndDayIndex = 1) to be reset. The acLogicalDs1FarEndDayValidStats will be set to False after the reset for the current interval. This field has no effect on acLogicalDs1FarEndDayIndex 2..31. This field will always show a value of false when read.
OBJECT-TYPE    
  TruthValue  

acLogicalDs1FarEndDayESs 1.3.6.1.4.1.2785.2.4.2.5.1.6
The number of Far End Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1FarEndDaySESs 1.3.6.1.4.1.2785.2.4.2.5.1.7
The number of Far End Severely Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1FarEndDaySEFSs 1.3.6.1.4.1.2785.2.4.2.5.1.8
The number of Far End Severely Errored Framing Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1FarEndDayUASs 1.3.6.1.4.1.2785.2.4.2.5.1.9
The number of Unavailable Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1FarEndDayCSSs 1.3.6.1.4.1.2785.2.4.2.5.1.10
The number of Far End Controlled Slip Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1FarEndDayLESs 1.3.6.1.4.1.2785.2.4.2.5.1.11
The number of Far End Line Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1FarEndDayPCVs 1.3.6.1.4.1.2785.2.4.2.5.1.12
The number of Far End Path Coding Violations.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1FarEndDayBESs 1.3.6.1.4.1.2785.2.4.2.5.1.13
The number of Far End Bursty Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1FarEndDayDMs 1.3.6.1.4.1.2785.2.4.2.5.1.14
The number of Far End Degraded Minutes.
OBJECT-TYPE    
  PerfIntervalCount  

acLogicalDs1ThresholdTable 1.3.6.1.4.1.2785.2.4.2.6
The Appian DS1 Logical Threshold Table allows the user to configure the threshold values for each of the statistics found in the interval table base on the 15 minute interval on the day. This table is created automatically.
OBJECT-TYPE    
  SEQUENCE OF  
    AcLogicalDs1ThresholdEntry

acLogicalDs1ThresholdEntry 1.3.6.1.4.1.2785.2.4.2.6.1
An entry in the Appian DS1 Threshold table.
OBJECT-TYPE    
  AcLogicalDs1ThresholdEntry  

acLogicalDs1ThresholdNodeId 1.3.6.1.4.1.2785.2.4.2.6.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acLogicalDs1ThresholdIndex 1.3.6.1.4.1.2785.2.4.2.6.1.2
The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a acLogicalDs1Index object instance. This table is created automatically.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdNEIntervalESs 1.3.6.1.4.1.2785.2.4.2.6.1.3
The threshold value for interval number of Errored Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdNEIntervalSESs 1.3.6.1.4.1.2785.2.4.2.6.1.4
The threshold value for the interval number of Severely Errored Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdNEIntervalSEFSs 1.3.6.1.4.1.2785.2.4.2.6.1.5
The threshold for the interval number of Severely Errored Framing Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdNEIntervalUASs 1.3.6.1.4.1.2785.2.4.2.6.1.6
The threshold for the interval number of Unavailable Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdNEIntervalCSSs 1.3.6.1.4.1.2785.2.4.2.6.1.7
The threshold for the interval number of Controlled Slip Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdNEIntervalPCVs 1.3.6.1.4.1.2785.2.4.2.6.1.8
The threshold for the interval number of Path Coding Violations. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdNEIntervalLESs 1.3.6.1.4.1.2785.2.4.2.6.1.9
The threshold value for the interval number of Line Errored Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdNEIntervalBESs 1.3.6.1.4.1.2785.2.4.2.6.1.10
The threshold for the interval number of Bursty Errored Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdNEIntervalDMs 1.3.6.1.4.1.2785.2.4.2.6.1.11
The threshold for the interval number of Degraded Minutes. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdNEIntervalLCVs 1.3.6.1.4.1.2785.2.4.2.6.1.12
The threshold for the interval number of Line Code Violations. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdNEDayESs 1.3.6.1.4.1.2785.2.4.2.6.1.13
The threshold value for day number of Errored Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdNEDaySESs 1.3.6.1.4.1.2785.2.4.2.6.1.14
The threshold for the day number of Severely Errored Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdNEDaySEFSs 1.3.6.1.4.1.2785.2.4.2.6.1.15
The threshold value for the day number of Severely Errored Framing Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdNEDayUASs 1.3.6.1.4.1.2785.2.4.2.6.1.16
The threshold value for the day number of Unavailable Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdNEDayCSSs 1.3.6.1.4.1.2785.2.4.2.6.1.17
The threshold for the day number of Controlled Slip Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdNEDayPCVs 1.3.6.1.4.1.2785.2.4.2.6.1.18
The threshold value for the day number of Path Coding Violations. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdNEDayLESs 1.3.6.1.4.1.2785.2.4.2.6.1.19
The threshold for the day number of Line Errored Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdNEDayBESs 1.3.6.1.4.1.2785.2.4.2.6.1.20
The threshold for the day number of Bursty Errored Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdNEDayDMs 1.3.6.1.4.1.2785.2.4.2.6.1.21
The threshold for the day number of Degraded Minutes. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdNEDayLCVs 1.3.6.1.4.1.2785.2.4.2.6.1.22
The threshold for the day number of Line Code Violations. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdFEIntervalESs 1.3.6.1.4.1.2785.2.4.2.6.1.23
The threshold for the far end interval number of Far End Errored Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdFEIntervalSESs 1.3.6.1.4.1.2785.2.4.2.6.1.24
The threshold for the far end interval number of Far End Severely Errored Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdFEIntervalSEFSs 1.3.6.1.4.1.2785.2.4.2.6.1.25
The threshold for the far end interval number of Far End Severely Errored Framing Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdFEIntervalUASs 1.3.6.1.4.1.2785.2.4.2.6.1.26
The threshold value for the far end interval number of Unavailable Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdFEIntervalCSSs 1.3.6.1.4.1.2785.2.4.2.6.1.27
The threshold value for the far end interval number of Far End Controlled Slip Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdFEIntervalLESs 1.3.6.1.4.1.2785.2.4.2.6.1.28
The threshold value for the far end interal number of Far End Line Errored Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdFEIntervalPCVs 1.3.6.1.4.1.2785.2.4.2.6.1.29
The threshold for the far end internal number of Far End Path Coding Violations. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdFEIntervalBESs 1.3.6.1.4.1.2785.2.4.2.6.1.30
The threshold for the far end interval number of Far End Bursty Errored Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdFEIntervalDMs 1.3.6.1.4.1.2785.2.4.2.6.1.31
The threshold for the far end interval number of Far End Degraded Minutes. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdFEDayESs 1.3.6.1.4.1.2785.2.4.2.6.1.32
The threshold for the far end day number of Far End Errored Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdFEDaySESs 1.3.6.1.4.1.2785.2.4.2.6.1.33
The threshold for the far end day number of Far End Severely Errored Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdFEDaySEFSs 1.3.6.1.4.1.2785.2.4.2.6.1.34
The threshold for the far end day number of Far End Severely Errored Framing Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdFEDayUASs 1.3.6.1.4.1.2785.2.4.2.6.1.35
The threshold value for the far end day number of Unavailable Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdFEDayCSSs 1.3.6.1.4.1.2785.2.4.2.6.1.36
The threshold value for the far end day number of Far End Controlled Slip Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdFEDayLESs 1.3.6.1.4.1.2785.2.4.2.6.1.37
The threshold value for the far end interal number of Far End Line Errored Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdFEDayPCVs 1.3.6.1.4.1.2785.2.4.2.6.1.38
The threshold for the far end internal number of Far End Path Coding Violations. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdFEDayBESs 1.3.6.1.4.1.2785.2.4.2.6.1.39
The threshold for the far end day number of Far End Bursty Errored Seconds. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

acLogicalDs1ThresholdFEDayDMs 1.3.6.1.4.1.2785.2.4.2.6.1.40
The threshold for the far end day number of Far End Degraded Minutes. A value of 0 disables the threshold for this error.
OBJECT-TYPE    
  INTEGER  

Defined Objects

AcLogicalDs1ConfigEntry  
SEQUENCE    
  AcNodeId as acLogicalDs1ConfigNodeId  
  INTEGER as acLogicalDs1ConfigIndex  
  AcAdminStatus as acLogicalDs1ConfigAdminStatus  
  INTEGER as acLogicalDs1ConfigTimeElapsedInterval  
  INTEGER as acLogicalDs1ConfigValidIntervals  
  INTEGER as acLogicalDs1ConfigTimeElapsedDay  
  INTEGER as acLogicalDs1ConfigValidDays  
  INTEGER as acLogicalDs1ConfigTimeElapsedFarEndInterval  
  INTEGER as acLogicalDs1ConfigValidFarEndIntervals  
  INTEGER as acLogicalDs1ConfigTimeElapsedFarEndDay  
  INTEGER as acLogicalDs1ConfigValidFarEndDays  
  INTEGER as acLogicalDs1ConfigSendCode  
  DisplayString as acLogicalDs1ConfigCircuitIdentifier  
  INTEGER as acLogicalDs1ConfigLoopbackConfig  
  INTEGER as acLogicalDs1ConfigLineStatus  
  INTEGER as acLogicalDs1ConfigTransmitClockSource  
  INTEGER as acLogicalDs1ConfigInvalidIntervals  
  INTEGER as acLogicalDs1ConfigInvalidDays  
  INTEGER as acLogicalDs1ConfigInvalidFarEndIntervals  
  INTEGER as acLogicalDs1ConfigInvalidFarEndDays  
  TimeStamp as acLogicalDs1ConfigLineStatusLastChange  
  INTEGER as acLogicalDs1ConfigLineStatusChangeTrapEnable  
  INTEGER as acLogicalDs1ConfigLoopbackStatus  
  INTEGER as acLogicalDs1ConfigVTNumber  

AcLogicalDs1IntervalEntry  
SEQUENCE    
  AcNodeId as acLogicalDs1IntervalNodeId  
  INTEGER as acLogicalDs1IntervalIndex  
  INTEGER as acLogicalDs1IntervalNumber  
  TruthValue as acLogicalDs1IntervalValidStats  
  TruthValue as acLogicalDs1IntervalResetStats  
  PerfIntervalCount as acLogicalDs1IntervalESs  
  PerfIntervalCount as acLogicalDs1IntervalSESs  
  PerfIntervalCount as acLogicalDs1IntervalSEFSs  
  PerfIntervalCount as acLogicalDs1IntervalUASs  
  PerfIntervalCount as acLogicalDs1IntervalCSSs  
  PerfIntervalCount as acLogicalDs1IntervalPCVs  
  PerfIntervalCount as acLogicalDs1IntervalLESs  
  PerfIntervalCount as acLogicalDs1IntervalBESs  
  PerfIntervalCount as acLogicalDs1IntervalDMs  
  PerfIntervalCount as acLogicalDs1IntervalLCVs  

AcLogicalDs1DayEntry  
SEQUENCE    
  AcNodeId as acLogicalDs1DayNodeId  
  INTEGER as acLogicalDs1DayIndex  
  INTEGER as acLogicalDs1DayNumber  
  TruthValue as acLogicalDs1DayValidStats  
  TruthValue as acLogicalDs1DayResetStats  
  PerfIntervalCount as acLogicalDs1DayESs  
  PerfIntervalCount as acLogicalDs1DaySESs  
  PerfIntervalCount as acLogicalDs1DaySEFSs  
  PerfIntervalCount as acLogicalDs1DayUASs  
  PerfIntervalCount as acLogicalDs1DayCSSs  
  PerfIntervalCount as acLogicalDs1DayPCVs  
  PerfIntervalCount as acLogicalDs1DayLESs  
  PerfIntervalCount as acLogicalDs1DayBESs  
  PerfIntervalCount as acLogicalDs1DayDMs  
  PerfIntervalCount as acLogicalDs1DayLCVs  

AcLogicalDs1FarEndIntervalEntry  
SEQUENCE    
  AcNodeId as acLogicalDs1FarEndIntervalNodeId  
  INTEGER as acLogicalDs1FarEndIntervalIndex  
  INTEGER as acLogicalDs1FarEndIntervalNumber  
  TruthValue as acLogicalDs1FarEndIntervalValidStats  
  TruthValue as acLogicalDs1FarEndIntervalResetStats  
  PerfIntervalCount as acLogicalDs1FarEndIntervalESs  
  PerfIntervalCount as acLogicalDs1FarEndIntervalSESs  
  PerfIntervalCount as acLogicalDs1FarEndIntervalSEFSs  
  PerfIntervalCount as acLogicalDs1FarEndIntervalUASs  
  PerfIntervalCount as acLogicalDs1FarEndIntervalCSSs  
  PerfIntervalCount as acLogicalDs1FarEndIntervalLESs  
  PerfIntervalCount as acLogicalDs1FarEndIntervalPCVs  
  PerfIntervalCount as acLogicalDs1FarEndIntervalBESs  
  PerfIntervalCount as acLogicalDs1FarEndIntervalDMs  

AcLogicalDs1FarEndDayEntry  
SEQUENCE    
  AcNodeId as acLogicalDs1FarEndDayNodeId  
  INTEGER as acLogicalDs1FarEndDayIndex  
  INTEGER as acLogicalDs1FarEndDayNumber  
  TruthValue as acLogicalDs1FarEndDayValidStats  
  TruthValue as acLogicalDs1FarEndDayResetStats  
  PerfIntervalCount as acLogicalDs1FarEndDayESs  
  PerfIntervalCount as acLogicalDs1FarEndDaySESs  
  PerfIntervalCount as acLogicalDs1FarEndDaySEFSs  
  PerfIntervalCount as acLogicalDs1FarEndDayUASs  
  PerfIntervalCount as acLogicalDs1FarEndDayCSSs  
  PerfIntervalCount as acLogicalDs1FarEndDayLESs  
  PerfIntervalCount as acLogicalDs1FarEndDayPCVs  
  PerfIntervalCount as acLogicalDs1FarEndDayBESs  
  PerfIntervalCount as acLogicalDs1FarEndDayDMs  

AcLogicalDs1ThresholdEntry  
SEQUENCE    
  AcNodeId as acLogicalDs1ThresholdNodeId  
  INTEGER as acLogicalDs1ThresholdIndex  
  INTEGER as acLogicalDs1ThresholdNEIntervalESs  
  INTEGER as acLogicalDs1ThresholdNEIntervalSESs  
  INTEGER as acLogicalDs1ThresholdNEIntervalSEFSs  
  INTEGER as acLogicalDs1ThresholdNEIntervalUASs  
  INTEGER as acLogicalDs1ThresholdNEIntervalCSSs  
  INTEGER as acLogicalDs1ThresholdNEIntervalPCVs  
  INTEGER as acLogicalDs1ThresholdNEIntervalLESs  
  INTEGER as acLogicalDs1ThresholdNEIntervalBESs  
  INTEGER as acLogicalDs1ThresholdNEIntervalDMs  
  INTEGER as acLogicalDs1ThresholdNEIntervalLCVs  
  INTEGER as acLogicalDs1ThresholdNEDayESs  
  INTEGER as acLogicalDs1ThresholdNEDaySESs  
  INTEGER as acLogicalDs1ThresholdNEDaySEFSs  
  INTEGER as acLogicalDs1ThresholdNEDayUASs  
  INTEGER as acLogicalDs1ThresholdNEDayCSSs  
  INTEGER as acLogicalDs1ThresholdNEDayPCVs  
  INTEGER as acLogicalDs1ThresholdNEDayLESs  
  INTEGER as acLogicalDs1ThresholdNEDayBESs  
  INTEGER as acLogicalDs1ThresholdNEDayDMs  
  INTEGER as acLogicalDs1ThresholdNEDayLCVs  
  INTEGER as acLogicalDs1ThresholdFEIntervalESs  
  INTEGER as acLogicalDs1ThresholdFEIntervalSESs  
  INTEGER as acLogicalDs1ThresholdFEIntervalSEFSs  
  INTEGER as acLogicalDs1ThresholdFEIntervalUASs  
  INTEGER as acLogicalDs1ThresholdFEIntervalCSSs  
  INTEGER as acLogicalDs1ThresholdFEIntervalLESs  
  INTEGER as acLogicalDs1ThresholdFEIntervalPCVs  
  INTEGER as acLogicalDs1ThresholdFEIntervalBESs  
  INTEGER as acLogicalDs1ThresholdFEIntervalDMs  
  INTEGER as acLogicalDs1ThresholdFEDayESs  
  INTEGER as acLogicalDs1ThresholdFEDaySESs  
  INTEGER as acLogicalDs1ThresholdFEDaySEFSs  
  INTEGER as acLogicalDs1ThresholdFEDayUASs  
  INTEGER as acLogicalDs1ThresholdFEDayCSSs  
  INTEGER as acLogicalDs1ThresholdFEDayLESs  
  INTEGER as acLogicalDs1ThresholdFEDayPCVs  
  INTEGER as acLogicalDs1ThresholdFEDayBESs  
  INTEGER as acLogicalDs1ThresholdFEDayDMs