APPIAN-PPORT-DS1-MIB

File: APPIAN-PPORT-DS1-MIB.mib (89638 bytes)

Imported modules

APPIAN-SMI-MIB APPIAN-CHASSIS-MIB SNMPv2-TC
SNMPv2-SMI PerfHist-TC-MIB

Imported symbols

acPport AcOpStatus AcSlotNumber
AcPortNumber AcAdminStatus AcNodeId
acChassisCurrentTime acChassisRingId DisplayString
TimeStamp TruthValue MODULE-IDENTITY
OBJECT-TYPE NOTIFICATION-TYPE PerfIntervalCount

Defined Objects

acDs1 1.3.6.1.4.1.2785.2.3.4
The MIB module to describe the Appian DS1 interfaces objects. The tables for this DS1 are NOT SHARED between OSAPs.
MODULE-IDENTITY    

acDs1Traps 1.3.6.1.4.1.2785.2.3.4.0
OBJECT IDENTIFIER    

acDs1LineStatusChangeTrap 1.3.6.1.4.1.2785.2.3.4.0.1
An acLogcialDs1LineStatusChange trap is sent when the value of an instance acDs1ConfigLineStatus changes. It can be utilized by an NMS to trigger polls.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ConfigNodeId  
  acDs1ConfigSlot  
  acDs1ConfigPort  
  acDs1ConfigLineStatus  
  acDs1ConfigLineStatusLastChange  

acDs1StatsResetTrap 1.3.6.1.4.1.2785.2.3.4.0.2
The Ds1 statistics for this interface have been reset to zero (0) which may effect long term trending functions monitoring this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ConfigNodeId  
  acDs1ConfigSlot  
  acDs1ConfigPort  

acDs1CfgErrorTrap 1.3.6.1.4.1.2785.2.3.4.0.3
A configuration request to the Ds1 configuration table for an interface has been detected as invalid or corrupt.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ConfigNodeId  
  acDs1ConfigSlot  
  acDs1ConfigPort  

acDs1LinkDownTrap 1.3.6.1.4.1.2785.2.3.4.0.4
The link for this physical ds1 interface has obtained sync.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ConfigNodeId  
  acDs1ConfigSlot  
  acDs1ConfigPort  

acDs1LinkUpTrap 1.3.6.1.4.1.2785.2.3.4.0.5
The link for this physical ds1 interface has been lost.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ConfigNodeId  
  acDs1ConfigSlot  
  acDs1ConfigPort  

acDs1ExceededThresholdNEIntervalESsTrap 1.3.6.1.4.1.2785.2.3.4.0.7
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdNEIntervalSESsTrap 1.3.6.1.4.1.2785.2.3.4.0.8
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdNEIntervalSEFSsTrap 1.3.6.1.4.1.2785.2.3.4.0.9
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdNEIntervalUASsTrap 1.3.6.1.4.1.2785.2.3.4.0.10
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdNEIntervalCSSsTrap 1.3.6.1.4.1.2785.2.3.4.0.11
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdNEIntervalPCVsTrap 1.3.6.1.4.1.2785.2.3.4.0.12
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdNEIntervalLESsTrap 1.3.6.1.4.1.2785.2.3.4.0.13
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdNEIntervalBESsTrap 1.3.6.1.4.1.2785.2.3.4.0.14
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdNEIntervalDMsTrap 1.3.6.1.4.1.2785.2.3.4.0.15
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdNEIntervalLCVsTrap 1.3.6.1.4.1.2785.2.3.4.0.16
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdNEDayESsTrap 1.3.6.1.4.1.2785.2.3.4.0.17
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdNEDaySESsTrap 1.3.6.1.4.1.2785.2.3.4.0.18
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdNEDaySEFSTrap 1.3.6.1.4.1.2785.2.3.4.0.19
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdNEDayUASsTrap 1.3.6.1.4.1.2785.2.3.4.0.20
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdNEDayCSSsTrap 1.3.6.1.4.1.2785.2.3.4.0.21
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdNEDayPCVsTrap 1.3.6.1.4.1.2785.2.3.4.0.22
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdNEDayLESsTrap 1.3.6.1.4.1.2785.2.3.4.0.23
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdNEDayBESsTrap 1.3.6.1.4.1.2785.2.3.4.0.24
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdNEDayDMsTrap 1.3.6.1.4.1.2785.2.3.4.0.25
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdNEDayLCVsTrap 1.3.6.1.4.1.2785.2.3.4.0.26
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdFEIntervalESsTrap 1.3.6.1.4.1.2785.2.3.4.0.27
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdFEIntervalSESsTrap 1.3.6.1.4.1.2785.2.3.4.0.28
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdFEIntervalSEFSsTrap 1.3.6.1.4.1.2785.2.3.4.0.29
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdFEIntervalUASsTrap 1.3.6.1.4.1.2785.2.3.4.0.30
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdFEIntervalCSSsTrap 1.3.6.1.4.1.2785.2.3.4.0.31
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdFEIntervalLESsTrap 1.3.6.1.4.1.2785.2.3.4.0.32
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdFEIntervalPCVsTrap 1.3.6.1.4.1.2785.2.3.4.0.33
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdFEIntervalBESsTrap 1.3.6.1.4.1.2785.2.3.4.0.34
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdFEIntervalDMsTrap 1.3.6.1.4.1.2785.2.3.4.0.35
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdFEDayESsTrap 1.3.6.1.4.1.2785.2.3.4.0.36
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdFEDaySESsTrap 1.3.6.1.4.1.2785.2.3.4.0.37
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdFEDaySEFSsTrap 1.3.6.1.4.1.2785.2.3.4.0.38
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdFEDayUASsTrap 1.3.6.1.4.1.2785.2.3.4.0.39
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdFEDayCSSsTrap 1.3.6.1.4.1.2785.2.3.4.0.40
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdFEDayLESsTrap 1.3.6.1.4.1.2785.2.3.4.0.41
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdFEDayPCVsTrap 1.3.6.1.4.1.2785.2.3.4.0.42
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdFEDayBESsTrap 1.3.6.1.4.1.2785.2.3.4.0.43
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ExceededThresholdFEDayDMsTrap 1.3.6.1.4.1.2785.2.3.4.0.44
The threshold value speficed has been exceeded for this interface.
NOTIFICATION-TYPE    
  acChassisCurrentTime  
  acChassisRingId  
  acDs1ThresholdNodeId  
  acDs1ThresholdSlot  
  acDs1ThresholdPort  

acDs1ConfigTable 1.3.6.1.4.1.2785.2.3.4.1
The DS1 Configuration table. This table is created by the EMS/CLI.
OBJECT-TYPE    
  SEQUENCE OF  
    AcDs1ConfigEntry

acDs1ConfigEntry 1.3.6.1.4.1.2785.2.3.4.1.1
An entry in the DS1 Configuration table.
OBJECT-TYPE    
  AcDs1ConfigEntry  

acDs1ConfigNodeId 1.3.6.1.4.1.2785.2.3.4.1.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acDs1ConfigSlot 1.3.6.1.4.1.2785.2.3.4.1.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acDs1ConfigPort 1.3.6.1.4.1.2785.2.3.4.1.1.3
The physical port number of the port
OBJECT-TYPE    
  AcPortNumber  

acDs1ConfigAdminStatus 1.3.6.1.4.1.2785.2.3.4.1.1.4
Appian Administrative Status attribute used to set the provisioning state as either activate(1), delete(2) or inactivate(3). Refer to the Appian-SMI.mib file for additional information.
OBJECT-TYPE    
  AcAdminStatus  

acDs1ConfigOpStatus 1.3.6.1.4.1.2785.2.3.4.1.1.5
The operational or actual state of this ds1.
OBJECT-TYPE    
  AcOpStatus  

acDs1ConfigTimeElapsedInterval 1.3.6.1.4.1.2785.2.3.4.1.1.6
The number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
OBJECT-TYPE    
  INTEGER 0..899  

acDs1ConfigValidIntervals 1.3.6.1.4.1.2785.2.3.4.1.1.7
The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
OBJECT-TYPE    
  INTEGER 0..96  

acDs1ConfigTimeElapsedDay 1.3.6.1.4.1.2785.2.3.4.1.1.8
The number of seconds that have elapsed since the beginning of the near end current day error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current day interval exceeds the maximum value, the agent will return the maximum value.
OBJECT-TYPE    
  INTEGER 0..86399  

acDs1ConfigValidDays 1.3.6.1.4.1.2785.2.3.4.1.1.9
The number of previous near end days for which data was collected. The value will be 30 unless the interface was brought online within the last 30 days, in which case the value will be the number of complete 24 hr near end days since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
OBJECT-TYPE    
  INTEGER 0..30  

acDs1ConfigTimeElapsedFarEndInterval 1.3.6.1.4.1.2785.2.3.4.1.1.10
The number of seconds that have elapsed since the beginning of the far end current error-measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
OBJECT-TYPE    
  INTEGER 0..899  

acDs1ConfigValidFarEndIntervals 1.3.6.1.4.1.2785.2.3.4.1.1.11
The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
OBJECT-TYPE    
  INTEGER 0..96  

acDs1ConfigTimeElapsedFarEndDay 1.3.6.1.4.1.2785.2.3.4.1.1.12
The number of seconds that have elapsed since the beginning of the far end current day error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current day interval exceeds the maximum value, the agent will return the maximum value.
OBJECT-TYPE    
  INTEGER 0..86399  

acDs1ConfigValidFarEndDays 1.3.6.1.4.1.2785.2.3.4.1.1.13
The number of previous near end days for which data was collected. The value will be 30 unless the far/near end interface was brought online within the last 30 days, in which case the value will be the number of complete 24 hr far end days since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
OBJECT-TYPE    
  INTEGER 0..30  

acDs1ConfigLineType 1.3.6.1.4.1.2785.2.3.4.1.1.14
This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well as the interpretation of the usage and error statistics. The values, in sequence, describe: TITLE: SPECIFICATION: esf Extended SuperFrame DS1 (T1.107) d4 AT&T D4 format DS1 (T1.107)
OBJECT-TYPE    
  INTEGER esf(1), d4(2)  

acDs1ConfigLineCoding 1.3.6.1.4.1.2785.2.3.4.1.1.15
This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. b8zs refers to the use of a specified pattern of normal bits and bipolar violations which are used to replace a sequence of eight zero bits. ami refers to a mode wherein no zero code suppression is present and the line encoding does not solve the problem directly. In this application, the higher layer must provide data which meets or exceeds the pulse density requirements, such as inverting HDLC data.
OBJECT-TYPE    
  INTEGER b8zs(1), ami(2)  

acDs1ConfigCircuitIdentifier 1.3.6.1.4.1.2785.2.3.4.1.1.16
This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

acDs1ConfigLoopbackConfig 1.3.6.1.4.1.2785.2.3.4.1.1.17
This variable represents the desired loopback configuration of the DS1 interface. Agents supporting read/write access should return inconsistentValue in response to a requested loopback state that the interface does not support. The values mean: none Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value. payload The received signal at this interface is looped through the device. Typically the received signal is looped back for retransmission after it has passed through the device's framing function. facility The received signal at this interface does not go through the device (minimum penetration) but is looped back out. other Loopbacks that are not defined here. terminal The transmitted signal at this interface is looped back and received by the same interface. What is transmitted onto the line is product dependent. dual Both acDs1LineLoop and acDs1InwardLoop will be active simultaneously. **NOADMINDOWN**
OBJECT-TYPE    
  INTEGER none(1), payload(2), facility(3), other(4), terminal(5), dual(6)  

acDs1ConfigLineStatus 1.3.6.1.4.1.2785.2.3.4.1.1.18
This variable indicates the Line Status of the interface. It contains loopback, failure, received 'alarm' and transmitted 'alarms information. The acDs1ConfigLineStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) and a LoopbackState simultaneously. acDs1NoAlarm must be set if and only if no other flag is set. If the acDs1loopbackState bit is set, the loopback in effect can be determined from the acDs1loopbackConfig object. The various bit positions are: 1 acDs1NoAlarm No alarm present 2 acDs1RcvFarEndLOF Far end LOF (a.k.a., Yellow Alarm) 4 acDs1XmtFarEndLOF Near end sending LOF Indication 8 acDs1RcvAIS Far end sending AIS 16 acDs1XmtAIS Near end sending AIS 32 acDs1LossOfFrame Near end LOF (a.k.a., Red Alarm) 64 acDs1LossOfSignal Near end Loss Of Signal 128 acDs1LoopbackState Near end is looped 512 acDs1RcvFarEndLOMF Far End Sending TS16 LOMF 1024 acDs1XmtFarEndLOMF Near End Sending TS16 LOMF 2048 acDs1RcvTestCode Near End detects a test code 4096 acDs1RcvFarEndRAI any line status not defined here 8192 acDs1RcvFarEndUnEqp Far End sending VT 1.5 labelled UNEQUIPPED 16384 acDs1NetEquipOOS Carrier Equipment Out of Service
OBJECT-TYPE    
  INTEGER 1..131071  

acDs1ConfigSignalMode 1.3.6.1.4.1.2785.2.3.4.1.1.19
'none' indicates that no bits are reserved for signaling on this channel. 'message' indicates that Common Chan- nel Signaling is in use on channel 24 of a DS1.
OBJECT-TYPE    
  INTEGER none(1), message(2), other(3)  

acDs1ConfigTransmitClockSource 1.3.6.1.4.1.2785.2.3.4.1.1.20
The source of Transmit Clock. 'bits' indicates that recovered receive clock through a bits device is used as the transmit clock. 'localTiming' indicates that a local clock source is used or when an external clock is attached to the box containing the interface. 'throughTiming' indicates that recovered re- ceive clock from another interface is used as the transmit clock.
OBJECT-TYPE    
  INTEGER bits(1), local(2), through(3)  

acDs1ConfigFdl 1.3.6.1.4.1.2785.2.3.4.1.1.21
This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties. Set any bits that are appropriate: other(1), ansi(2), att(4), none(8) 'other' indicates that a protocol other than one following is used. 'ansi' refers to the FDL exchange recommended by ANSI. 'att' refers to ESF FDL exchanges. 'none' indicates that the device does not use the FDL.
OBJECT-TYPE    
  INTEGER 1..15  

acDs1ConfigInvalidIntervals 1.3.6.1.4.1.2785.2.3.4.1.1.22
The number of intervals in the range from 0 to acDs1ValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
OBJECT-TYPE    
  INTEGER 0..96  

acDs1ConfigInvalidDays 1.3.6.1.4.1.2785.2.3.4.1.1.23
The number of days in the range from 0 to acDs1ConfigValidDays for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
OBJECT-TYPE    
  INTEGER 0..30  

acDs1ConfigInvalidFarEndIntervals 1.3.6.1.4.1.2785.2.3.4.1.1.24
The number of intervals in the range from 0 to acDs1ConfigValidFarEndIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
OBJECT-TYPE    
  INTEGER 0..96  

acDs1ConfigInvalidFarEndDays 1.3.6.1.4.1.2785.2.3.4.1.1.25
The number of days in the range from 0 to acDs1ConfigValidFarEndDays for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
OBJECT-TYPE    
  INTEGER 0..30  

acDs1ConfigLineStatusLastChange 1.3.6.1.4.1.2785.2.3.4.1.1.26
The value of MIB II's sysUpTime object at the time this DS1 entered its current line status state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a zero value.
OBJECT-TYPE    
  TimeStamp  

acDs1ConfigLineStatusChangeTrapEnable 1.3.6.1.4.1.2785.2.3.4.1.1.27
Indicates whether acDs1ConfigLineStatusChange traps should be generated for this interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

acDs1ConfigLoopbackStatus 1.3.6.1.4.1.2785.2.3.4.1.1.28
This variable represents the current state of the loopback on the DS1 interface. It contains information about loopbacks established by a manager and remotely from the far end. The acDs1ConfigLoopbackStatus is a bit map represented as a sum, therefore is can represent multiple loopbacks simultaneously. The various bit positions are: 1 acDs1NoLoopback 2 acDs1NearEndPayloadLoopback 4 acDs1NearEndLineLoopback 8 acDs1NearEndOtherLoopback 16 acDs1NearEndInwardLoopback 32 acDs1FarEndPayloadLoopback 64 acDs1FarEndLineLoopback
OBJECT-TYPE    
  INTEGER 1..127  

acDs1ConfigInterfaceName 1.3.6.1.4.1.2785.2.3.4.1.1.29
A user configurable interface name which can be up to 64 bytes in length which uniquely identifies this DS1 interface.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

acDs1ConfigTimeSlotIndex 1.3.6.1.4.1.2785.2.3.4.1.1.30
This index corresponds to the desired timeslot row in the Shared Timeslot Table with a payload type of ds1tdm.
OBJECT-TYPE    
  INTEGER  

acDs1IntervalTable 1.3.6.1.4.1.2785.2.3.4.2
The Appian DS1 Interval Table contains various statistics collected by each DS1 Interface over the previous 24 hours of operation as well as over the current period. The past 24 hours are broken into 96 completed 15 minute intervals. The first row in this table (identified by acDs1IntervalNumber=1) represents the current interval statistics. The next 96 rows in this table (represented by acDs1IntervalNumber=2..97) represents one of the past 15 minute intervals. The final row (identified by acDs1IntervalNumber=98) is the total of all the past intervals (2..97). This table is created automatically.
OBJECT-TYPE    
  SEQUENCE OF  
    AcDs1IntervalEntry

acDs1IntervalEntry 1.3.6.1.4.1.2785.2.3.4.2.1
An entry in the Appian DS1 Interval table.
OBJECT-TYPE    
  AcDs1IntervalEntry  

acDs1IntervalNodeId 1.3.6.1.4.1.2785.2.3.4.2.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acDs1IntervalSlot 1.3.6.1.4.1.2785.2.3.4.2.1.2
The physical slot number for this port.
OBJECT-TYPE    
  AcSlotNumber  

acDs1IntervalPort 1.3.6.1.4.1.2785.2.3.4.2.1.3
The physical port number for this port.
OBJECT-TYPE    
  AcPortNumber  

acDs1IntervalNumber 1.3.6.1.4.1.2785.2.3.4.2.1.4
A number between 1 and 98, where 1 is the current 15 minute interval in progress, 2 is the most recently completed 15 minute interval and 97 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 2, and 98 is the total (sum) of all of the previous completed intervals (2..97).
OBJECT-TYPE    
  INTEGER 1..98  

acDs1IntervalValidStats 1.3.6.1.4.1.2785.2.3.4.2.1.5
This variable indicates if the data for this interval is valid. For acDs1IntervalNumber=98, this value will only be true if all data is valid for intervals 2..97.
OBJECT-TYPE    
  TruthValue  

acDs1IntervalResetStats 1.3.6.1.4.1.2785.2.3.4.2.1.6
This variable allows the data for the current interval (acDs1IntervalNumber = 1) to be reset. The acDs1IntervalValidFlag will be set to False after the reset for the current interval. This field has no effect on acDs1IntervalNumber 2..98. This field will always show a value of False when read.
OBJECT-TYPE    
  TruthValue  

acDs1IntervalESs 1.3.6.1.4.1.2785.2.3.4.2.1.7
The number of Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1IntervalSESs 1.3.6.1.4.1.2785.2.3.4.2.1.8
The number of Severely Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1IntervalSEFSs 1.3.6.1.4.1.2785.2.3.4.2.1.9
The number of Severely Errored Framing Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1IntervalUASs 1.3.6.1.4.1.2785.2.3.4.2.1.10
The number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1IntervalCSSs 1.3.6.1.4.1.2785.2.3.4.2.1.11
The number of Controlled Slip Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1IntervalPCVs 1.3.6.1.4.1.2785.2.3.4.2.1.12
The number of Path Coding Violations.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1IntervalLESs 1.3.6.1.4.1.2785.2.3.4.2.1.13
The number of Line Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1IntervalBESs 1.3.6.1.4.1.2785.2.3.4.2.1.14
The number of Bursty Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1IntervalDMs 1.3.6.1.4.1.2785.2.3.4.2.1.15
The number of Degraded Minutes.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1IntervalLCVs 1.3.6.1.4.1.2785.2.3.4.2.1.16
The number of Line Code Violations.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1DayTable 1.3.6.1.4.1.2785.2.3.4.3
The Appian DS1 Day Table contains various statistics collected by each DS1 Interface over the previous 30 days of operation as well as over the current day period. The first row in this table (identified by acDs1DayNumber=1) represents the current day statistics. The next 30 rows in this table (represented by acDs1DayNumber=2..31) represents one of the past 24 hr periods (day). This table is created automatically.
OBJECT-TYPE    
  SEQUENCE OF  
    AcDs1DayEntry

acDs1DayEntry 1.3.6.1.4.1.2785.2.3.4.3.1
An entry in the Appian DS1 Day table.
OBJECT-TYPE    
  AcDs1DayEntry  

acDs1DayNodeId 1.3.6.1.4.1.2785.2.3.4.3.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acDs1DaySlot 1.3.6.1.4.1.2785.2.3.4.3.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acDs1DayPort 1.3.6.1.4.1.2785.2.3.4.3.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acDs1DayNumber 1.3.6.1.4.1.2785.2.3.4.3.1.4
A number between 1 and 31, where 1 is the current 24 hour interval in progress (day), 2 is the most recently completed 24 hour interval and 31 is the 24 hour interval completed 29 days prior to interval 1.
OBJECT-TYPE    
  INTEGER 1..31  

acDs1DayValidStats 1.3.6.1.4.1.2785.2.3.4.3.1.5
This variable indicates if the data for this interval is valid.
OBJECT-TYPE    
  TruthValue  

acDs1DayResetStats 1.3.6.1.4.1.2785.2.3.4.3.1.6
This variable allows the data for the current day (acDs1DayIndex = 1) to be reset. The acDs1DayValidFlag will be set to False after the reset for the current day. This field has no effect on acDs1DayIndex 2..31. This field will always show a value of False when read.
OBJECT-TYPE    
  TruthValue  

acDs1DayESs 1.3.6.1.4.1.2785.2.3.4.3.1.7
The number of Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1DaySESs 1.3.6.1.4.1.2785.2.3.4.3.1.8
The number of Severely Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1DaySEFSs 1.3.6.1.4.1.2785.2.3.4.3.1.9
The number of Severely Errored Framing Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1DayUASs 1.3.6.1.4.1.2785.2.3.4.3.1.10
The number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1DayCSSs 1.3.6.1.4.1.2785.2.3.4.3.1.11
The number of Controlled Slip Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1DayPCVs 1.3.6.1.4.1.2785.2.3.4.3.1.12
The number of Path Coding Violations.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1DayLESs 1.3.6.1.4.1.2785.2.3.4.3.1.13
The number of Line Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1DayBESs 1.3.6.1.4.1.2785.2.3.4.3.1.14
The number of Bursty Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1DayDMs 1.3.6.1.4.1.2785.2.3.4.3.1.15
The number of Degraded Minutes.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1DayLCVs 1.3.6.1.4.1.2785.2.3.4.3.1.16
The number of Line Code Violations.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1FarEndIntervalTable 1.3.6.1.4.1.2785.2.3.4.4
The DS1 Far End Interval Table contains various statistics collected by each DS1 interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals. Each row in this table represents one such interval (identified by acDs1FarEndIntervalNumber) for one specific instance (identified by acDs1FarEndIntervalSlot, acDs1FarEndIntervalPort). This table is created automatically.
OBJECT-TYPE    
  SEQUENCE OF  
    AcDs1FarEndIntervalEntry

acDs1FarEndIntervalEntry 1.3.6.1.4.1.2785.2.3.4.4.1
An entry in the DS1 Far End Interval table.
OBJECT-TYPE    
  AcDs1FarEndIntervalEntry  

acDs1FarEndIntervalNodeId 1.3.6.1.4.1.2785.2.3.4.4.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acDs1FarEndIntervalSlot 1.3.6.1.4.1.2785.2.3.4.4.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acDs1FarEndIntervalPort 1.3.6.1.4.1.2785.2.3.4.4.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acDs1FarEndIntervalNumber 1.3.6.1.4.1.2785.2.3.4.4.1.4
A number between 1 and 98, where 1 is current 15 minute interval in progress, 2 is the most recently completed 15 minute interval and 97 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 2, and 98 is the total of intervals 2..97 (sum).
OBJECT-TYPE    
  INTEGER 1..98  

acDs1FarEndIntervalValidStats 1.3.6.1.4.1.2785.2.3.4.4.1.5
This variable indicates if the data for this interval is valid. For acDs1FarEndIntervalNumber=98, this value will only be true if all data is valid for intervals 2..97.
OBJECT-TYPE    
  TruthValue  

acDs1FarEndIntervalResetStats 1.3.6.1.4.1.2785.2.3.4.4.1.6
This variable allows the data for the current interval (acDs1FarEndIntervalNumber = 1) to be reset. The acDs1FarEndIntervalValidFlag will be set to False after the reset for the current interval. This field has no effect on acDs1FarEndIntervalNumber 2..98. This field will always show a value of false when read.
OBJECT-TYPE    
  TruthValue  

acDs1FarEndIntervalESs 1.3.6.1.4.1.2785.2.3.4.4.1.7
The number of Far End Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1FarEndIntervalSESs 1.3.6.1.4.1.2785.2.3.4.4.1.8
The number of Far End Severely Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1FarEndIntervalSEFSs 1.3.6.1.4.1.2785.2.3.4.4.1.9
The number of Far End Severely Errored Framing Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1FarEndIntervalUASs 1.3.6.1.4.1.2785.2.3.4.4.1.10
The number of Unavailable Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1FarEndIntervalCSSs 1.3.6.1.4.1.2785.2.3.4.4.1.11
The number of Far End Controlled Slip Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1FarEndIntervalLESs 1.3.6.1.4.1.2785.2.3.4.4.1.12
The number of Far End Line Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1FarEndIntervalPCVs 1.3.6.1.4.1.2785.2.3.4.4.1.13
The number of Far End Path Coding Violations.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1FarEndIntervalBESs 1.3.6.1.4.1.2785.2.3.4.4.1.14
The number of Far End Bursty Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1FarEndIntervalDMs 1.3.6.1.4.1.2785.2.3.4.4.1.15
The number of Far End Degraded Minutes.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1FarEndDayTable 1.3.6.1.4.1.2785.2.3.4.5
The DS1 Far End Day Table contains various statistics collected by each DS1 interface over the previous 30 days of operation. Each row in this table represents a one day interval (identified by acDs1FarEndDayNumber). This table is created automatically.
OBJECT-TYPE    
  SEQUENCE OF  
    AcDs1FarEndDayEntry

acDs1FarEndDayEntry 1.3.6.1.4.1.2785.2.3.4.5.1
An entry in the DS1 Far End Day table.
OBJECT-TYPE    
  AcDs1FarEndDayEntry  

acDs1FarEndDayNodeId 1.3.6.1.4.1.2785.2.3.4.5.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acDs1FarEndDaySlot 1.3.6.1.4.1.2785.2.3.4.5.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acDs1FarEndDayPort 1.3.6.1.4.1.2785.2.3.4.5.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acDs1FarEndDayNumber 1.3.6.1.4.1.2785.2.3.4.5.1.4
A number between 1 and 31, where 1 is current 24 hour day interval in progress, 2 is the most recently completed 24 hour day interval and 31 is the 24 hour day interval completed 29 days prior to interval 2.
OBJECT-TYPE    
  INTEGER 1..31  

acDs1FarEndDayValidStats 1.3.6.1.4.1.2785.2.3.4.5.1.5
This variable indicates if the data for this interval is valid.
OBJECT-TYPE    
  TruthValue  

acDs1FarEndDayResetStats 1.3.6.1.4.1.2785.2.3.4.5.1.6
This variable allows the data for the current day (acDs1FarEndDayIndex = 1) to be reset. The acDs1FarEndDayValidFlag will be set to False after the reset for the current interval. This field has no effect on acDs1FarEndDayIndex 2..31. This field will always show a value of false when read.
OBJECT-TYPE    
  TruthValue  

acDs1FarEndDayESs 1.3.6.1.4.1.2785.2.3.4.5.1.7
The number of Far End Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1FarEndDaySESs 1.3.6.1.4.1.2785.2.3.4.5.1.8
The number of Far End Severely Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1FarEndDaySEFSs 1.3.6.1.4.1.2785.2.3.4.5.1.9
The number of Far End Severely Errored Framing Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1FarEndDayUASs 1.3.6.1.4.1.2785.2.3.4.5.1.10
The number of Unavailable Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1FarEndDayCSSs 1.3.6.1.4.1.2785.2.3.4.5.1.11
The number of Far End Controlled Slip Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1FarEndDayLESs 1.3.6.1.4.1.2785.2.3.4.5.1.12
The number of Far End Line Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1FarEndDayPCVs 1.3.6.1.4.1.2785.2.3.4.5.1.13
The number of Far End Path Coding Violations.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1FarEndDayBESs 1.3.6.1.4.1.2785.2.3.4.5.1.14
The number of Far End Bursty Errored Seconds.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1FarEndDayDMs 1.3.6.1.4.1.2785.2.3.4.5.1.15
The number of Far End Degraded Minutes.
OBJECT-TYPE    
  PerfIntervalCount  

acDs1ThresholdTable 1.3.6.1.4.1.2785.2.3.4.6
The Appian DS1 Threshold Table allows the user to configure the threshold values for each of the statistics found in the interval table base on the 15 minute interval on the day. This table is created automatically.
OBJECT-TYPE    
  SEQUENCE OF  
    AcDs1ThresholdEntry

acDs1ThresholdEntry 1.3.6.1.4.1.2785.2.3.4.6.1
An entry in the Appian DS1 Threshold table.
OBJECT-TYPE    
  AcDs1ThresholdEntry  

acDs1ThresholdNodeId 1.3.6.1.4.1.2785.2.3.4.6.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acDs1ThresholdSlot 1.3.6.1.4.1.2785.2.3.4.6.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acDs1ThresholdPort 1.3.6.1.4.1.2785.2.3.4.6.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acDs1ThresholdNEIntervalESs 1.3.6.1.4.1.2785.2.3.4.6.1.4
The threshold value for interval number of Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdNEIntervalSESs 1.3.6.1.4.1.2785.2.3.4.6.1.5
The threshold value for the interval number of Severely Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdNEIntervalSEFSs 1.3.6.1.4.1.2785.2.3.4.6.1.6
The threshold for the interval number of Severely Errored Framing Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdNEIntervalUASs 1.3.6.1.4.1.2785.2.3.4.6.1.7
The threshold for the interval number of Unavailable Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdNEIntervalCSSs 1.3.6.1.4.1.2785.2.3.4.6.1.8
The threshold for the interval number of Controlled Slip Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdNEIntervalPCVs 1.3.6.1.4.1.2785.2.3.4.6.1.9
The threshold for the interval number of Path Coding Violations. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdNEIntervalLESs 1.3.6.1.4.1.2785.2.3.4.6.1.10
The threshold value for the interval number of Line Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdNEIntervalBESs 1.3.6.1.4.1.2785.2.3.4.6.1.11
The threshold for the interval number of Bursty Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdNEIntervalDMs 1.3.6.1.4.1.2785.2.3.4.6.1.12
The threshold for the interval number of Degraded Minutes. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdNEIntervalLCVs 1.3.6.1.4.1.2785.2.3.4.6.1.13
The threshold for the interval number of Line Code Violations. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdNEDayESs 1.3.6.1.4.1.2785.2.3.4.6.1.14
The threshold value for day number of Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdNEDaySESs 1.3.6.1.4.1.2785.2.3.4.6.1.15
The threshold for the day number of Severely Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdNEDaySEFSs 1.3.6.1.4.1.2785.2.3.4.6.1.16
The threshold value for the day number of Severely Errored Framing Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdNEDayUASs 1.3.6.1.4.1.2785.2.3.4.6.1.17
The threshold value for the day number of Unavailable Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdNEDayCSSs 1.3.6.1.4.1.2785.2.3.4.6.1.18
The threshold for the day number of Controlled Slip Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdNEDayPCVs 1.3.6.1.4.1.2785.2.3.4.6.1.19
The threshold value for the day number of Path Coding Violations. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdNEDayLESs 1.3.6.1.4.1.2785.2.3.4.6.1.20
The threshold for the day number of Line Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdNEDayBESs 1.3.6.1.4.1.2785.2.3.4.6.1.21
The threshold for the day number of Bursty Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdNEDayDMs 1.3.6.1.4.1.2785.2.3.4.6.1.22
The threshold for the day number of Degraded Minutes. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdNEDayLCVs 1.3.6.1.4.1.2785.2.3.4.6.1.23
The threshold for the day number of Line Code Violations. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdFEIntervalESs 1.3.6.1.4.1.2785.2.3.4.6.1.24
The threshold for the far end interval number of Far End Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdFEIntervalSESs 1.3.6.1.4.1.2785.2.3.4.6.1.25
The threshold for the far end interval number of Far End Severely Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdFEIntervalSEFSs 1.3.6.1.4.1.2785.2.3.4.6.1.26
The threshold for the far end interval number of Far End Severely Errored Framing Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdFEIntervalUASs 1.3.6.1.4.1.2785.2.3.4.6.1.27
The threshold value for the far end interval number of Unavailable Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdFEIntervalCSSs 1.3.6.1.4.1.2785.2.3.4.6.1.28
The threshold value for the far end interval number of Far End Controlled Slip Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdFEIntervalLESs 1.3.6.1.4.1.2785.2.3.4.6.1.29
The threshold value for the far end interal number of Far End Line Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdFEIntervalPCVs 1.3.6.1.4.1.2785.2.3.4.6.1.30
The threshold for the far end internal number of Far End Path Coding Violations. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdFEIntervalBESs 1.3.6.1.4.1.2785.2.3.4.6.1.31
The threshold for the far end interval number of Far End Bursty Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdFEIntervalDMs 1.3.6.1.4.1.2785.2.3.4.6.1.32
The threshold for the far end interval number of Far End Degraded Minutes. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdFEDayESs 1.3.6.1.4.1.2785.2.3.4.6.1.33
The threshold for the far end day number of Far End Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdFEDaySESs 1.3.6.1.4.1.2785.2.3.4.6.1.34
The threshold for the far end day number of Far End Severely Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdFEDaySEFSs 1.3.6.1.4.1.2785.2.3.4.6.1.35
The threshold for the far end day number of Far End Severely Errored Framing Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdFEDayUASs 1.3.6.1.4.1.2785.2.3.4.6.1.36
The threshold value for the far end day number of Unavailable Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdFEDayCSSs 1.3.6.1.4.1.2785.2.3.4.6.1.37
The threshold value for the far end day number of Far End Controlled Slip Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdFEDayLESs 1.3.6.1.4.1.2785.2.3.4.6.1.38
The threshold value for the far end interal number of Far End Line Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdFEDayPCVs 1.3.6.1.4.1.2785.2.3.4.6.1.39
The threshold for the far end internal number of Far End Path Coding Violations. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdFEDayBESs 1.3.6.1.4.1.2785.2.3.4.6.1.40
The threshold for the far end day number of Far End Bursty Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

acDs1ThresholdFEDayDMs 1.3.6.1.4.1.2785.2.3.4.6.1.41
The threshold for the far end day number of Far End Degraded Minutes. A value of 0 disables the threshold mechanism for this attribute.
OBJECT-TYPE    
  INTEGER  

Defined Objects

AcDs1ConfigEntry  
SEQUENCE    
  AcNodeId as acDs1ConfigNodeId  
  AcSlotNumber as acDs1ConfigSlot  
  AcPortNumber as acDs1ConfigPort  
  AcAdminStatus as acDs1ConfigAdminStatus  
  AcOpStatus as acDs1ConfigOpStatus  
  INTEGER as acDs1ConfigTimeElapsedInterval  
  INTEGER as acDs1ConfigValidIntervals  
  INTEGER as acDs1ConfigTimeElapsedDay  
  INTEGER as acDs1ConfigValidDays  
  INTEGER as acDs1ConfigTimeElapsedFarEndInterval  
  INTEGER as acDs1ConfigValidFarEndIntervals  
  INTEGER as acDs1ConfigTimeElapsedFarEndDay  
  INTEGER as acDs1ConfigValidFarEndDays  
  INTEGER as acDs1ConfigLineType  
  INTEGER as acDs1ConfigLineCoding  
  DisplayString as acDs1ConfigCircuitIdentifier  
  INTEGER as acDs1ConfigLoopbackConfig  
  INTEGER as acDs1ConfigLineStatus  
  INTEGER as acDs1ConfigSignalMode  
  INTEGER as acDs1ConfigTransmitClockSource  
  INTEGER as acDs1ConfigFdl  
  INTEGER as acDs1ConfigInvalidIntervals  
  INTEGER as acDs1ConfigInvalidDays  
  INTEGER as acDs1ConfigInvalidFarEndIntervals  
  INTEGER as acDs1ConfigInvalidFarEndDays  
  TimeStamp as acDs1ConfigLineStatusLastChange  
  INTEGER as acDs1ConfigLineStatusChangeTrapEnable  
  INTEGER as acDs1ConfigLoopbackStatus  
  DisplayString as acDs1ConfigInterfaceName  
  INTEGER as acDs1ConfigTimeSlotIndex  

AcDs1IntervalEntry  
SEQUENCE    
  AcNodeId as acDs1IntervalNodeId  
  AcSlotNumber as acDs1IntervalSlot  
  AcPortNumber as acDs1IntervalPort  
  INTEGER as acDs1IntervalNumber  
  TruthValue as acDs1IntervalValidStats  
  TruthValue as acDs1IntervalResetStats  
  PerfIntervalCount as acDs1IntervalESs  
  PerfIntervalCount as acDs1IntervalSESs  
  PerfIntervalCount as acDs1IntervalSEFSs  
  PerfIntervalCount as acDs1IntervalUASs  
  PerfIntervalCount as acDs1IntervalCSSs  
  PerfIntervalCount as acDs1IntervalPCVs  
  PerfIntervalCount as acDs1IntervalLESs  
  PerfIntervalCount as acDs1IntervalBESs  
  PerfIntervalCount as acDs1IntervalDMs  
  PerfIntervalCount as acDs1IntervalLCVs  

AcDs1DayEntry  
SEQUENCE    
  AcNodeId as acDs1DayNodeId  
  AcSlotNumber as acDs1DaySlot  
  AcPortNumber as acDs1DayPort  
  INTEGER as acDs1DayNumber  
  TruthValue as acDs1DayValidStats  
  TruthValue as acDs1DayResetStats  
  PerfIntervalCount as acDs1DayESs  
  PerfIntervalCount as acDs1DaySESs  
  PerfIntervalCount as acDs1DaySEFSs  
  PerfIntervalCount as acDs1DayUASs  
  PerfIntervalCount as acDs1DayCSSs  
  PerfIntervalCount as acDs1DayPCVs  
  PerfIntervalCount as acDs1DayLESs  
  PerfIntervalCount as acDs1DayBESs  
  PerfIntervalCount as acDs1DayDMs  
  PerfIntervalCount as acDs1DayLCVs  

AcDs1FarEndIntervalEntry  
SEQUENCE    
  AcNodeId as acDs1FarEndIntervalNodeId  
  AcSlotNumber as acDs1FarEndIntervalSlot  
  AcPortNumber as acDs1FarEndIntervalPort  
  INTEGER as acDs1FarEndIntervalNumber  
  TruthValue as acDs1FarEndIntervalValidStats  
  TruthValue as acDs1FarEndIntervalResetStats  
  PerfIntervalCount as acDs1FarEndIntervalESs  
  PerfIntervalCount as acDs1FarEndIntervalSESs  
  PerfIntervalCount as acDs1FarEndIntervalSEFSs  
  PerfIntervalCount as acDs1FarEndIntervalUASs  
  PerfIntervalCount as acDs1FarEndIntervalCSSs  
  PerfIntervalCount as acDs1FarEndIntervalLESs  
  PerfIntervalCount as acDs1FarEndIntervalPCVs  
  PerfIntervalCount as acDs1FarEndIntervalBESs  
  PerfIntervalCount as acDs1FarEndIntervalDMs  

AcDs1FarEndDayEntry  
SEQUENCE    
  AcNodeId as acDs1FarEndDayNodeId  
  AcSlotNumber as acDs1FarEndDaySlot  
  AcPortNumber as acDs1FarEndDayPort  
  INTEGER as acDs1FarEndDayNumber  
  TruthValue as acDs1FarEndDayValidStats  
  TruthValue as acDs1FarEndDayResetStats  
  PerfIntervalCount as acDs1FarEndDayESs  
  PerfIntervalCount as acDs1FarEndDaySESs  
  PerfIntervalCount as acDs1FarEndDaySEFSs  
  PerfIntervalCount as acDs1FarEndDayUASs  
  PerfIntervalCount as acDs1FarEndDayCSSs  
  PerfIntervalCount as acDs1FarEndDayLESs  
  PerfIntervalCount as acDs1FarEndDayPCVs  
  PerfIntervalCount as acDs1FarEndDayBESs  
  PerfIntervalCount as acDs1FarEndDayDMs  

AcDs1ThresholdEntry  
SEQUENCE    
  AcNodeId as acDs1ThresholdNodeId  
  AcSlotNumber as acDs1ThresholdSlot  
  AcPortNumber as acDs1ThresholdPort  
  INTEGER as acDs1ThresholdNEIntervalESs  
  INTEGER as acDs1ThresholdNEIntervalSESs  
  INTEGER as acDs1ThresholdNEIntervalSEFSs  
  INTEGER as acDs1ThresholdNEIntervalUASs  
  INTEGER as acDs1ThresholdNEIntervalCSSs  
  INTEGER as acDs1ThresholdNEIntervalPCVs  
  INTEGER as acDs1ThresholdNEIntervalLESs  
  INTEGER as acDs1ThresholdNEIntervalBESs  
  INTEGER as acDs1ThresholdNEIntervalDMs  
  INTEGER as acDs1ThresholdNEIntervalLCVs  
  INTEGER as acDs1ThresholdNEDayESs  
  INTEGER as acDs1ThresholdNEDaySESs  
  INTEGER as acDs1ThresholdNEDaySEFSs  
  INTEGER as acDs1ThresholdNEDayUASs  
  INTEGER as acDs1ThresholdNEDayCSSs  
  INTEGER as acDs1ThresholdNEDayPCVs  
  INTEGER as acDs1ThresholdNEDayLESs  
  INTEGER as acDs1ThresholdNEDayBESs  
  INTEGER as acDs1ThresholdNEDayDMs  
  INTEGER as acDs1ThresholdNEDayLCVs  
  INTEGER as acDs1ThresholdFEIntervalESs  
  INTEGER as acDs1ThresholdFEIntervalSESs  
  INTEGER as acDs1ThresholdFEIntervalSEFSs  
  INTEGER as acDs1ThresholdFEIntervalUASs  
  INTEGER as acDs1ThresholdFEIntervalCSSs  
  INTEGER as acDs1ThresholdFEIntervalLESs  
  INTEGER as acDs1ThresholdFEIntervalPCVs  
  INTEGER as acDs1ThresholdFEIntervalBESs  
  INTEGER as acDs1ThresholdFEIntervalDMs  
  INTEGER as acDs1ThresholdFEDayESs  
  INTEGER as acDs1ThresholdFEDaySESs  
  INTEGER as acDs1ThresholdFEDaySEFSs  
  INTEGER as acDs1ThresholdFEDayUASs  
  INTEGER as acDs1ThresholdFEDayCSSs  
  INTEGER as acDs1ThresholdFEDayLESs  
  INTEGER as acDs1ThresholdFEDayPCVs  
  INTEGER as acDs1ThresholdFEDayBESs  
  INTEGER as acDs1ThresholdFEDayDMs