APPIAN-PPORT-SONET-MIB

File: APPIAN-PPORT-SONET-MIB.mib (191397 bytes)

Imported modules

APPIAN-SMI-MIB SNMPv2-SMI SNMPv2-TC
PerfHist-TC-MIB

Imported symbols

acPport AcAdminStatus AcOpStatus
AcSlotNumber AcPortNumber AcNodeId
MODULE-IDENTITY OBJECT-TYPE Integer32
TEXTUAL-CONVENTION DisplayString TruthValue
PerfIntervalCount

Defined Objects

acSonet 1.3.6.1.4.1.2785.2.3.6
The MIB module to describe SONET/SDH objects.
MODULE-IDENTITY    

acSonetObjects 1.3.6.1.4.1.2785.2.3.6.1
OBJECT IDENTIFIER    

acSonetPort 1.3.6.1.4.1.2785.2.3.6.1.1
OBJECT IDENTIFIER    

acSonetPortTable 1.3.6.1.4.1.2785.2.3.6.1.1.1
The SONET/SDH Port table which must be created by the management client.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetPortEntry

acSonetPortEntry 1.3.6.1.4.1.2785.2.3.6.1.1.1.1
An entry in the SONET/SDH Port table.
OBJECT-TYPE    
  AcSonetPortEntry  

acSonetPortNodeId 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetPortSlot 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetPortPort 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetPortAdminStatus 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.4
Appian Administrative Status attribute used to set the provisioning state as either activate(1), inactivate(2) or delete(3). Refer to the Appian-SMI.mib file for additional information.
OBJECT-TYPE    
  AcAdminStatus  

acSonetPortOpStatus 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.5
The current operational status for the SONET module controlling this port.
OBJECT-TYPE    
  AcOpStatus  

acSonetPortOpCode 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.6
Provides a detailed status code which can be used to isolate a problem or state condition reported in acSonetPortOpStatus.
OBJECT-TYPE    
  INTEGER  

acSonetPortMediumType 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.7
This variable identifies whether a SONET or a SDH signal is used across this interface.
OBJECT-TYPE    
  INTEGER sonet(1), sdh(2)  

acSonetPortTimeElapsed 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.8
The number of seconds, including partial seconds, that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
OBJECT-TYPE    
  Integer32 1..900  

acSonetPortValidIntervals 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.9
The number of previous 15-minute intervals for which data was collected. A SONET/SDH interface must be capable of supporting at least n intervals. The minimum value of n is 4. The default of n is 32. The maximum value of n is 96. The value will be unless the measurement was (re-)started within the last (*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
OBJECT-TYPE    
  Integer32 0..96  

acSonetPortMediumLineCoding 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.10
This variable describes the line coding for this interface. The B3ZS and CMI are used for electrical SONET/SDH signals (STS-1 and STS-3). The Non-Return to Zero (NRZ) and the Return to Zero are used for optical SONET/SDH signals.
OBJECT-TYPE    
  INTEGER other(1), b3zs(2), cmi(3), nrz(4), rz(5)  

acSonetPortMediumLineType 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.11
This variable describes the line type for this interface. The line types are Short and Long Range Single Mode fiber or Multi-Mode fiber interfaces, and coax and UTP for electrical interfaces. The value acSonetOther should be used when the Line Type is not one of the listed values.
OBJECT-TYPE    
  INTEGER other(1), short-single(2), long-single(3), multi(4), coax(5), utp(6), intermediate(7)  

acSonetPortTransmitterEnable 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.12
Turns the laser on and off.
OBJECT-TYPE    
  TruthValue  

acSonetPortCircuitIdentifier 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.13
This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. Note that the circuit identifier, if available, is also represented by ifPhysAddress.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

acSonetPortInvalidIntervals 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.14
The number of intervals in the range from 0 to acSonetPortValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
OBJECT-TYPE    
  Integer32 0..96  

acSonetPortLoopbackConfig 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.15
The current loopback state of the SONET/SDH interface. The values mean: none(0) Not in the loopback state. A device that is not capable of performing a loopback on this interface shall always return this value. facility(1) The received signal at this interface is looped back out through the corresponding transmitter in the return direction. terminal(2) The signal that is about to be transmitted is connected to the associated incoming receiver. other(3) Loopbacks that are not defined here.
OBJECT-TYPE    
  INTEGER none(0), facility(1), terminal(2), other(3)  

acSonetPortResetCurrentPMregs 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.16
Reset Performance Monitoring Registers for current 15 minute and day to zero for entity-related statisics. Reset on receiving a 1, will automatically go to 0 at next 15 minute or day interval.
OBJECT-TYPE    
  TruthValue  

acSonetPortResetAllPMregs 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.17
Reset Performance Monitoring Registers to zero for all entity-related statisics. Reset on receiving a 1, will automatically go to 0 at next 15 minute or day interval.
OBJECT-TYPE    
  TruthValue  

acSonetPortConnectionType 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.18
Whether the port is used on the ring side or the interconnect side. An interconnect interface is the one that connects to the ADM.
OBJECT-TYPE    
  INTEGER ring(1), interconnect(2)  

acSonetPortRingIdentifier 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.19
This is a number assigned by carrier. It is contained here as a convenience for carrier and the EMS. It is not used by the device. When used, this should be set in east facing port row in this table. It can also be optionally set in the west facing port row in this table but it must be the same as the set in the east facing port row.
OBJECT-TYPE    
  INTEGER  

acSonetPortRingName 1.3.6.1.4.1.2785.2.3.6.1.1.1.1.20
An ASCII text name up to 32 characters in length which is assigned to this optical ring. Like the RingIdentifier, this is contained here as a convenience for the carrier and the EMS. It is not used by the device. When used, this should be set in east facing port row in this table. It can also be optionally set in the west facing port row in this table but it must be the same as the set in the east facing port row.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

acSonetThresholdTable 1.3.6.1.4.1.2785.2.3.6.1.1.2
The SONET/SDH Threshold Table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetThresholdEntry

acSonetThresholdEntry 1.3.6.1.4.1.2785.2.3.6.1.1.2.1
An entry in the SONET/SDH Port Table.
OBJECT-TYPE    
  AcSonetThresholdEntry  

acSonetThresholdNodeId 1.3.6.1.4.1.2785.2.3.6.1.1.2.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetThresholdSlot 1.3.6.1.4.1.2785.2.3.6.1.1.2.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetThresholdPort 1.3.6.1.4.1.2785.2.3.6.1.1.2.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetThresholdSESSet 1.3.6.1.4.1.2785.2.3.6.1.1.2.1.4
An enumerated integer indicating which recognized set of thresholds that the agent uses for determining severely errored seconds and unavailable time. other(1) None of the following. Bellcore1991(2) Bellcore TR-NWT-000253, 1991 [32], or ANSI T1M1.3/93-005R2, 1993 [22]. See also Appendix B. ansi1993(3) ANSI T1.231, 1993 [31], or Bellcore GR-253-CORE, Issue 2, 1995 [34] itu1995(4) ITU Recommendation G.826, 1995 [33] ansi1997(5) ANSI T1.231, 1997 [35] If a manager changes the value of this object then the SES statistics collected prior to this change must be invalidated.
OBJECT-TYPE    
  INTEGER other(1), bellcore(2), ansi93(3), itu(4), ansi97(5)  

acSonetDCCTable 1.3.6.1.4.1.2785.2.3.6.1.1.3
The SONET/SDH DCC Table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetDCCEntry

acSonetDCCEntry 1.3.6.1.4.1.2785.2.3.6.1.1.3.1
An entry in the SONET/SDH Port Table.
OBJECT-TYPE    
  AcSonetDCCEntry  

acSonetDCCNodeId 1.3.6.1.4.1.2785.2.3.6.1.1.3.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetDCCSlot 1.3.6.1.4.1.2785.2.3.6.1.1.3.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetDCCPort 1.3.6.1.4.1.2785.2.3.6.1.1.3.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetDCCSectionEnable 1.3.6.1.4.1.2785.2.3.6.1.1.3.1.4
This variable indicates that the DCC for the section is enabled.
OBJECT-TYPE    
  TruthValue  

acSonetDCCLineEnable 1.3.6.1.4.1.2785.2.3.6.1.1.3.1.5
This variable indicates that the DCC for the line is enabled.
OBJECT-TYPE    
  TruthValue  

acSonetDCCAppianEnable 1.3.6.1.4.1.2785.2.3.6.1.1.3.1.6
This variable indicates that the Appian DCC is enabled.
OBJECT-TYPE    
  TruthValue  

acSonetDCCSectionFail 1.3.6.1.4.1.2785.2.3.6.1.1.3.1.7
This variable indicates that the DCC for the section has failed.
OBJECT-TYPE    
  TruthValue  

acSonetDCCLineFail 1.3.6.1.4.1.2785.2.3.6.1.1.3.1.8
This variable indicates that the DCC for the line has failed.
OBJECT-TYPE    
  TruthValue  

acSonetDCCAppianFail 1.3.6.1.4.1.2785.2.3.6.1.1.3.1.9
This variable indicates that the Appian DCC has failed.
OBJECT-TYPE    
  TruthValue  

acSonetPortProtectionTable 1.3.6.1.4.1.2785.2.3.6.1.1.4
The SONET/SDH Port Protection table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetPortProtectionEntry

acSonetPortProtectionEntry 1.3.6.1.4.1.2785.2.3.6.1.1.4.1
An entry in the SONET/SDH Port Protection table.
OBJECT-TYPE    
  AcSonetPortProtectionEntry  

acSonetPortProtectionNodeId 1.3.6.1.4.1.2785.2.3.6.1.1.4.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetPortProtectionSlot 1.3.6.1.4.1.2785.2.3.6.1.1.4.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetPortProtectionPort 1.3.6.1.4.1.2785.2.3.6.1.1.4.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetPortProtectionType 1.3.6.1.4.1.2785.2.3.6.1.1.4.1.4
This variable statically defines the purpose of the physical port connection as the working or protection port. It does not convey whether the system has undergone a protection switch.
OBJECT-TYPE    
  INTEGER working(1), protection(2), west(3), east(4), match(5), ring(6)  

acSonetSection 1.3.6.1.4.1.2785.2.3.6.1.2
OBJECT IDENTIFIER    

acSonetSection15MinuteIntervalTable 1.3.6.1.4.1.2785.2.3.6.1.2.1
The SONET/SDH Section 15Minute Interval table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetSection15MinuteIntervalEntry

acSonetSection15MinuteIntervalEntry 1.3.6.1.4.1.2785.2.3.6.1.2.1.1
An entry in the SONET/SDH Section 15Minute Interval table.
OBJECT-TYPE    
  AcSonetSection15MinuteIntervalEntry  

acSonetSection15MinuteIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.1.2.1.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetSection15MinuteIntervalSlot 1.3.6.1.4.1.2785.2.3.6.1.2.1.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetSection15MinuteIntervalPort 1.3.6.1.4.1.2785.2.3.6.1.2.1.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetSection15MinuteIntervalNumber 1.3.6.1.4.1.2785.2.3.6.1.2.1.1.4
A number between 1 and 98, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current 15 minute interval. The interval identified by 2 is the most recently completed 15 minute interval. The interval identified by 97 is the oldest 15 minute interval. The interval identified by 98 is a total of the previous 96 stored 15 minute intervals.
OBJECT-TYPE    
  INTEGER 1..98  

acSonetSection15MinuteIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.1.2.1.1.5
This flag indicates if the data for this interval is valid.
OBJECT-TYPE    
  TruthValue  

acSonetSection15MinuteIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.1.2.1.1.6
This flag is used to reset the data for a 15 minute interval.
OBJECT-TYPE    
  TruthValue  

acSonetSection15MinuteIntervalStatus 1.3.6.1.4.1.2785.2.3.6.1.2.1.1.7
This variable indicates the status of the interface. The acSonetSectionCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The acSonetSectionNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 acSonetSectionNoDefect 2 acSonetSectionLOS 4 acSonetSectionLOF
OBJECT-TYPE    
  Integer32 1..6  

acSonetSection15MinuteIntervalESs 1.3.6.1.4.1.2785.2.3.6.1.2.1.1.8
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetSection15MinuteIntervalSESs 1.3.6.1.4.1.2785.2.3.6.1.2.1.1.9
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetSection15MinuteIntervalSEFSs 1.3.6.1.4.1.2785.2.3.6.1.2.1.1.10
The counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetSection15MinuteIntervalCVs 1.3.6.1.4.1.2785.2.3.6.1.2.1.1.11
The counter associated with the number of Coding Violations encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetSectionDayIntervalTable 1.3.6.1.4.1.2785.2.3.6.1.2.2
The SONET/SDH Section Day Interval table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetSectionDayIntervalEntry

acSonetSectionDayIntervalEntry 1.3.6.1.4.1.2785.2.3.6.1.2.2.1
An entry in the SONET/SDH Section Day Interval table.
OBJECT-TYPE    
  AcSonetSectionDayIntervalEntry  

acSonetSectionDayIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.1.2.2.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetSectionDayIntervalSlot 1.3.6.1.4.1.2785.2.3.6.1.2.2.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetSectionDayIntervalPort 1.3.6.1.4.1.2785.2.3.6.1.2.2.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetSectionDayIntervalNumber 1.3.6.1.4.1.2785.2.3.6.1.2.2.1.4
A number between 1 and 31, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current day performance monitoring interval. The interval identified by 2 is the most recently completed day interval. The interval identified by 31 is the oldest day interval.
OBJECT-TYPE    
  INTEGER 1..31  

acSonetSectionDayIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.1.2.2.1.5
This flag indicates if the data for this interval is valid.
OBJECT-TYPE    
  TruthValue  

acSonetSectionDayIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.1.2.2.1.6
Flag used to reset the current day interval stats.
OBJECT-TYPE    
  TruthValue  

acSonetSectionDayIntervalStatus 1.3.6.1.4.1.2785.2.3.6.1.2.2.1.7
This variable indicates the status of the interface. The acSonetSectionCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The acSonetSectionNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 acSonetSectionNoDefect 2 acSonetSectionLOS 4 acSonetSectionLOF
OBJECT-TYPE    
  Integer32 1..6  

acSonetSectionDayIntervalESs 1.3.6.1.4.1.2785.2.3.6.1.2.2.1.8
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in a particular day interval in the past 30 days.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetSectionDayIntervalSESs 1.3.6.1.4.1.2785.2.3.6.1.2.2.1.9
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in a particular day interval in the past 30 days.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetSectionDayIntervalSEFSs 1.3.6.1.4.1.2785.2.3.6.1.2.2.1.10
The counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section in a particular day interval in the past 30 days.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetSectionDayIntervalCVs 1.3.6.1.4.1.2785.2.3.6.1.2.2.1.11
The counter associated with the number of Coding Violations encountered by a SONET/SDH Section in a particular day interval in the past 30 days.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetSectionThresholdTable 1.3.6.1.4.1.2785.2.3.6.1.2.3
The SONET/SDH Section Threshold Table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetSectionThresholdEntry

acSonetSectionThresholdEntry 1.3.6.1.4.1.2785.2.3.6.1.2.3.1
An entry in the SONET/SDH Section Threshold Table.
OBJECT-TYPE    
  AcSonetSectionThresholdEntry  

acSonetSectionThresholdNodeId 1.3.6.1.4.1.2785.2.3.6.1.2.3.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetSectionThresholdSlot 1.3.6.1.4.1.2785.2.3.6.1.2.3.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetSectionThresholdPort 1.3.6.1.4.1.2785.2.3.6.1.2.3.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetSectionThresholdSelectionNum 1.3.6.1.4.1.2785.2.3.6.1.2.3.1.4
A number that selects either the 15 thresholds or the day thresholds.
OBJECT-TYPE    
  INTEGER minute(1), day(2)  

acSonetSectionThresholdAdminStatus 1.3.6.1.4.1.2785.2.3.6.1.2.3.1.5
This field is used by the administrator to ensure only one client is performing management operations on this sonet port at a time. When the field is read as available(0), the client can write the value locked(1) into this field to prevent a second client from performing managment ops on this instance.
OBJECT-TYPE    
  AcAdminStatus  

acSonetSectionThresholdESs 1.3.6.1.4.1.2785.2.3.6.1.2.3.1.6
The threshold associated with Errored Seconds.
OBJECT-TYPE    
  INTEGER  

acSonetSectionThresholdSESs 1.3.6.1.4.1.2785.2.3.6.1.2.3.1.7
The threshold associated with Severely Errored Seconds.
OBJECT-TYPE    
  INTEGER  

acSonetSectionThresholdSEFSs 1.3.6.1.4.1.2785.2.3.6.1.2.3.1.8
The threshold associated with Severely Errored Framing Seconds.
OBJECT-TYPE    
  INTEGER  

acSonetSectionThresholdCVs 1.3.6.1.4.1.2785.2.3.6.1.2.3.1.9
The threshold associated with Coding Violations.
OBJECT-TYPE    
  INTEGER  

acSonetSectionTIMTable 1.3.6.1.4.1.2785.2.3.6.1.2.4
The SONET/SDH Section Trace Identifier Mismatch Table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetSectionTIMEntry

acSonetSectionTIMEntry 1.3.6.1.4.1.2785.2.3.6.1.2.4.1
An entry in the SONET/SDH Section Trace Identifier Mismatch Table.
OBJECT-TYPE    
  AcSonetSectionTIMEntry  

acSonetSectionTIMNodeId 1.3.6.1.4.1.2785.2.3.6.1.2.4.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetSectionTIMSlot 1.3.6.1.4.1.2785.2.3.6.1.2.4.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetSectionTIMPort 1.3.6.1.4.1.2785.2.3.6.1.2.4.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetSectionTIMGenerateEnable 1.3.6.1.4.1.2785.2.3.6.1.2.4.1.4
Enables the generation of the Section Trace Identifier.
OBJECT-TYPE    
  TruthValue  

acSonetSectionTIMDetectEnable 1.3.6.1.4.1.2785.2.3.6.1.2.4.1.5
Enables the detection of the Section Trace Identifier.
OBJECT-TYPE    
  TruthValue  

acSonetSectionTIMTransmitedString 1.3.6.1.4.1.2785.2.3.6.1.2.4.1.6
The string that gets sent to the destination.
OBJECT-TYPE    
  AcTraceString  

acSonetSectionTIMExpectedString 1.3.6.1.4.1.2785.2.3.6.1.2.4.1.7
The expected string that is to be received.
OBJECT-TYPE    
  AcTraceString  

acSonetSectionTIMReceivedString 1.3.6.1.4.1.2785.2.3.6.1.2.4.1.8
The contents of the string that is received.
OBJECT-TYPE    
  AcTraceString  

acSonetSectionTIMFailure 1.3.6.1.4.1.2785.2.3.6.1.2.4.1.9
Failure declared of the Section Trace Identifier.
OBJECT-TYPE    
  TruthValue  

acSonetSectionTIMFormat 1.3.6.1.4.1.2785.2.3.6.1.2.4.1.10
Format of Path Trace buffer.
OBJECT-TYPE    
  INTEGER void(0), t64(1), t64-crlf(2), t16(3), t16-msb1(4), t16-crc7(5)  

acSonetSectionTIMMismatchZeros 1.3.6.1.4.1.2785.2.3.6.1.2.4.1.11
Controls whether a received trace message containing all zeros can cause a mismatch defect.
OBJECT-TYPE    
  TruthValue  

acSonetSectionSSMTable 1.3.6.1.4.1.2785.2.3.6.1.2.5
The SONET/SDH Section Synchronization Status Message Table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetSectionSSMEntry

acSonetSectionSSMEntry 1.3.6.1.4.1.2785.2.3.6.1.2.5.1
An entry in the SONET/SDH Section Synchronization Status Message Table.
OBJECT-TYPE    
  AcSonetSectionSSMEntry  

acSonetSectionSSMNodeId 1.3.6.1.4.1.2785.2.3.6.1.2.5.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetSectionSSMSlot 1.3.6.1.4.1.2785.2.3.6.1.2.5.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetSectionSSMPort 1.3.6.1.4.1.2785.2.3.6.1.2.5.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetSectionSSMDetectEnable 1.3.6.1.4.1.2785.2.3.6.1.2.5.1.4
Enables the detection of the Synchronization Status Message.
OBJECT-TYPE    
  TruthValue  

acSonetSectionSSMTransmitedValue 1.3.6.1.4.1.2785.2.3.6.1.2.5.1.5
The S1 byte value that gets sent to the destination.
OBJECT-TYPE    
  INTEGER 0..255  

acSonetSectionSSMReceivedValue 1.3.6.1.4.1.2785.2.3.6.1.2.5.1.6
The S1 byte value that is received.
OBJECT-TYPE    
  INTEGER 0..255  

acSonetLine 1.3.6.1.4.1.2785.2.3.6.1.3
OBJECT IDENTIFIER    

acSonetLine15MinuteIntervalTable 1.3.6.1.4.1.2785.2.3.6.1.3.1
The SONET/SDH Line 15Minute Interval Table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetLine15MinuteIntervalEntry

acSonetLine15MinuteIntervalEntry 1.3.6.1.4.1.2785.2.3.6.1.3.1.1
An entry in the SONET/SDH Line 15Minute Interval table.
OBJECT-TYPE    
  AcSonetLine15MinuteIntervalEntry  

acSonetLine15MinuteIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.1.3.1.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetLine15MinuteIntervalSlot 1.3.6.1.4.1.2785.2.3.6.1.3.1.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetLine15MinuteIntervalPort 1.3.6.1.4.1.2785.2.3.6.1.3.1.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetLine15MinuteIntervalNumber 1.3.6.1.4.1.2785.2.3.6.1.3.1.1.4
A number between 1 and 98, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current 15 minute interval. The interval identified by 2 is the most recently completed 15 minute interval. The interval identified by 97 is the oldest 15 minute interval. The interval identified by 98 is a total of the previous 96 stored 15 minute intervals.
OBJECT-TYPE    
  INTEGER 1..98  

acSonetLine15MinuteIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.1.3.1.1.5
This variable indicates if the data for this interval is valid.
OBJECT-TYPE    
  TruthValue  

acSonetLine15MinuteIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.1.3.1.1.6
Flag to reset the 15 minute SONET Line interval statistics.
OBJECT-TYPE    
  TruthValue  

acSonetLine15MinuteIntervalStatus 1.3.6.1.4.1.2785.2.3.6.1.3.1.1.7
This variable indicates the status of the interface. The acSonetLineCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The acSonetLineNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 acSonetLineNoDefect 2 acSonetLineAIS 4 acSonetLineRDI
OBJECT-TYPE    
  Integer32 1..6  

acSonetLine15MinuteIntervalESs 1.3.6.1.4.1.2785.2.3.6.1.3.1.1.8
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetLine15MinuteIntervalSESs 1.3.6.1.4.1.2785.2.3.6.1.3.1.1.9
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetLine15MinuteIntervalCVs 1.3.6.1.4.1.2785.2.3.6.1.3.1.1.10
The counter associated with the number of Coding Violations encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetLine15MinuteIntervalUASs 1.3.6.1.4.1.2785.2.3.6.1.3.1.1.11
The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetLine15MinuteIntervalBER 1.3.6.1.4.1.2785.2.3.6.1.3.1.1.12
The counter associated with the max BER encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetLineDayIntervalTable 1.3.6.1.4.1.2785.2.3.6.1.3.2
The SONET/SDH Line Day Interval Table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetLineDayIntervalEntry

acSonetLineDayIntervalEntry 1.3.6.1.4.1.2785.2.3.6.1.3.2.1
An entry in the SONET/SDH Line Day Interval table.
OBJECT-TYPE    
  AcSonetLineDayIntervalEntry  

acSonetLineDayIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.1.3.2.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetLineDayIntervalSlot 1.3.6.1.4.1.2785.2.3.6.1.3.2.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetLineDayIntervalPort 1.3.6.1.4.1.2785.2.3.6.1.3.2.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetLineDayIntervalNumber 1.3.6.1.4.1.2785.2.3.6.1.3.2.1.4
A number between 1 and 31, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current day performance monitoring interval. The interval identified by 2 is the most recently completed day interval. The interval identified by 31 is the oldest day interval.
OBJECT-TYPE    
  INTEGER 1..31  

acSonetLineDayIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.1.3.2.1.5
This variable indicates if the data for this interval is valid.
OBJECT-TYPE    
  TruthValue  

acSonetLineDayIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.1.3.2.1.6
Flag to reset the SONET Line Day interval statistics.
OBJECT-TYPE    
  TruthValue  

acSonetLineDayIntervalStatus 1.3.6.1.4.1.2785.2.3.6.1.3.2.1.7
This variable indicates the status of the interface. The acSonetLineCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The acSonetLineNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 acSonetLineNoDefect 2 acSonetLineAIS 4 acSonetLineRDI
OBJECT-TYPE    
  Integer32 1..6  

acSonetLineDayIntervalESs 1.3.6.1.4.1.2785.2.3.6.1.3.2.1.8
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Line in a particular day interval in the past 30 days.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetLineDayIntervalSESs 1.3.6.1.4.1.2785.2.3.6.1.3.2.1.9
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line in a particular day interval in the past 30 days.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetLineDayIntervalCVs 1.3.6.1.4.1.2785.2.3.6.1.3.2.1.10
The counter associated with the number of Coding Violations encountered by a SONET/SDH Line in a particular day interval in the past 30 days.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetLineDayIntervalUASs 1.3.6.1.4.1.2785.2.3.6.1.3.2.1.11
The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line in a particular day interval in the past 30 days.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetLineDayIntervalBER 1.3.6.1.4.1.2785.2.3.6.1.3.2.1.12
The counter associated with the max BER encountered by a SONET/SDH Line in a particular day interval in the past 30 days.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetLineThresholdTable 1.3.6.1.4.1.2785.2.3.6.1.3.3
The SONET/SDH Line Threshold Table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetLineThresholdEntry

acSonetLineThresholdEntry 1.3.6.1.4.1.2785.2.3.6.1.3.3.1
An entry in the SONET/SDH Line Threshold Table.
OBJECT-TYPE    
  AcSonetLineThresholdEntry  

acSonetLineThresholdNodeId 1.3.6.1.4.1.2785.2.3.6.1.3.3.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetLineThresholdSlot 1.3.6.1.4.1.2785.2.3.6.1.3.3.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetLineThresholdPort 1.3.6.1.4.1.2785.2.3.6.1.3.3.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetLineThresholdSelectionNum 1.3.6.1.4.1.2785.2.3.6.1.3.3.1.4
A number that selects either the 15 thresholds or the day thresholds.
OBJECT-TYPE    
  INTEGER minute(1), day(2)  

acSonetLineThresholdAdminStatus 1.3.6.1.4.1.2785.2.3.6.1.3.3.1.5
This field is used by the administrator to ensure only one client is performing management operations on this serial port at a time. When the field is read as available(0), the client can write the value locked(1) into this field to prevent a second client from performing managment ops on this instance.
OBJECT-TYPE    
  AcAdminStatus  

acSonetLineThresholdESs 1.3.6.1.4.1.2785.2.3.6.1.3.3.1.6
The threshold associated with Errored Seconds.
OBJECT-TYPE    
  INTEGER  

acSonetLineThresholdSESs 1.3.6.1.4.1.2785.2.3.6.1.3.3.1.7
The threshold associated with Severely Errored Seconds.
OBJECT-TYPE    
  INTEGER  

acSonetLineThresholdCVs 1.3.6.1.4.1.2785.2.3.6.1.3.3.1.8
The threshold associated with Coding Violations.
OBJECT-TYPE    
  INTEGER  

acSonetLineThresholdUASs 1.3.6.1.4.1.2785.2.3.6.1.3.3.1.9
The threshold associated with Unavailable Secondss.
OBJECT-TYPE    
  INTEGER  

acSonetLineProtectionTable 1.3.6.1.4.1.2785.2.3.6.1.3.4
The SONET/SDH Line Protection table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetLineProtectionEntry

acSonetLineProtectionEntry 1.3.6.1.4.1.2785.2.3.6.1.3.4.1
An entry in the SONET/SDH Line Protection table.
OBJECT-TYPE    
  AcSonetLineProtectionEntry  

acSonetLineProtectionNodeId 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetLineProtectionSlot 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetLineProtectionPort 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetLineProtectionArchitecture 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.4
This variable defines the APS architecture as either 1+1 or 1:1.
OBJECT-TYPE    
  INTEGER none(1), one-plus-one(2), one-to-one(3)  

acSonetLineProtectionOpMode 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.5
This variable defines the APS mode as either unidirectional or bidirectional.
OBJECT-TYPE    
  INTEGER unidirectional(1), bidirectional(2)  

acSonetLineProtectionSwitchType 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.6
This variable defines the APS switch type as either revertive or nonrevertive.
OBJECT-TYPE    
  INTEGER revertive(1), nonrevertive(2)  

acSonetLineProtectionSFThreshold 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.7
The threshold associated with Signal Fail (SF). This value determines the BER level for protection switching.
OBJECT-TYPE    
  Integer32 3..5  

acSonetLineProtectionSDThreshold 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.8
The threshold associated with Signal Degrade (SD). This value determines the BER level for protection switching.
OBJECT-TYPE    
  Integer32 5..9  

acSonetLineProtectionActiveTraffic 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.9
This variable indicates when active traffic is on this line.
OBJECT-TYPE    
  TruthValue  

acSonetLineProtectionProtectionSwitch 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.10
This variable indicates when a protection switch is currently affecting this line.
OBJECT-TYPE    
  TruthValue  

acSonetLineProtectionFail 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.11
This variable indicates when a protection switching failure has taken place. See GR-253, 6.2.1.1.6.
OBJECT-TYPE    
  TruthValue  

acSonetLineProtectionChannelMismatchFail 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.12
This variable indicates when a protection switching channel mismatch failure has taken place. See GR-253, 6.2.1.1.6.
OBJECT-TYPE    
  TruthValue  

acSonetLineProtectionModeMismatchFail 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.13
This variable indicates when a protection switching mode mismatch failure has taken place. See GR-253, 6.2.1.1.6.
OBJECT-TYPE    
  TruthValue  

acSonetLineProtectionFarEndLineFail 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.14
This variable indicates when a protection switching far-end protection-line failure has taken place. See GR-253, 6.2.1.1.6.
OBJECT-TYPE    
  TruthValue  

acSonetLineProtectionWTRTime 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.15
This variable defines the APS Wait To Restore time. The time has one second granularity and may have a value in the range from 300 seconds (5 minutes) to 720 seconds (12 minutes).
OBJECT-TYPE    
  Integer32 300..720  

acSonetLineProtectionManCommand 1.3.6.1.4.1.2785.2.3.6.1.3.4.1.16
This variable defines the APS manually initiated commands.
OBJECT-TYPE    
  INTEGER clear(1), lockout-protection(2), force-working(3), force-protection(4), manual-working(5), manual-protection(6), exercise(7), lockout-working(8), clear-lockout-working(9)  

acSonetFarEndLine 1.3.6.1.4.1.2785.2.3.6.1.4
OBJECT IDENTIFIER    

acSonetFarEndLine15MinuteIntervalTable 1.3.6.1.4.1.2785.2.3.6.1.4.1
The SONET/SDH FarEndLine 15Minute Interval Table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetFarEndLine15MinuteIntervalEntry

acSonetFarEndLine15MinuteIntervalEntry 1.3.6.1.4.1.2785.2.3.6.1.4.1.1
An entry in the SONET/SDH FarEndLine 15Minute Interval table.
OBJECT-TYPE    
  AcSonetFarEndLine15MinuteIntervalEntry  

acSonetFarEndLine15MinuteIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.1.4.1.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetFarEndLine15MinuteIntervalSlot 1.3.6.1.4.1.2785.2.3.6.1.4.1.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetFarEndLine15MinuteIntervalPort 1.3.6.1.4.1.2785.2.3.6.1.4.1.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetFarEndLine15MinuteIntervalNumber 1.3.6.1.4.1.2785.2.3.6.1.4.1.1.4
A number between 1 and 98, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current 15 minute interval. The interval identified by 2 is the most recently completed 15 minute interval. The interval identified by 97 is the oldest 15 minute interval. The interval identified by 98 is a total of the previous 96 stored 15 minute intervals.
OBJECT-TYPE    
  INTEGER 1..98  

acSonetFarEndLine15MinuteIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.1.4.1.1.5
This variable indicates if the data for this interval is valid.
OBJECT-TYPE    
  TruthValue  

acSonetFarEndLine15MinuteIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.1.4.1.1.6
Flag to reset the SONET Far End Line 15 minute interval statistics.
OBJECT-TYPE    
  TruthValue  

acSonetFarEndLine15MinuteIntervalESs 1.3.6.1.4.1.2785.2.3.6.1.4.1.1.7
The counter associated with the number of Errored Seconds encountered by a SONET/SDH FarEndLine in a particular 15-minute interval in the past 24 hours.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndLine15MinuteIntervalSESs 1.3.6.1.4.1.2785.2.3.6.1.4.1.1.8
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH FarEndLine in a particular 15-minute interval in the past 24 hours.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndLine15MinuteIntervalCVs 1.3.6.1.4.1.2785.2.3.6.1.4.1.1.9
The counter associated with the number of Coding Violations encountered by a SONET/SDH FarEndLine in a particular 15-minute interval in the past 24 hours.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndLine15MinuteIntervalUASs 1.3.6.1.4.1.2785.2.3.6.1.4.1.1.10
The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH FarEndLine in a particular 15-minute interval in the past 24 hours.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndLineDayIntervalTable 1.3.6.1.4.1.2785.2.3.6.1.4.2
The SONET/SDH FarEndLine Day Interval Table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetFarEndLineDayIntervalEntry

acSonetFarEndLineDayIntervalEntry 1.3.6.1.4.1.2785.2.3.6.1.4.2.1
An entry in the SONET/SDH FarEndLine Day Interval table.
OBJECT-TYPE    
  AcSonetFarEndLineDayIntervalEntry  

acSonetFarEndLineDayIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.1.4.2.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetFarEndLineDayIntervalSlot 1.3.6.1.4.1.2785.2.3.6.1.4.2.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetFarEndLineDayIntervalPort 1.3.6.1.4.1.2785.2.3.6.1.4.2.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetFarEndLineDayIntervalNumber 1.3.6.1.4.1.2785.2.3.6.1.4.2.1.4
A number between 1 and 31, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current day performance monitoring interval. The interval identified by 2 is the most recently completed day interval. The interval identified by 31 is the oldest day interval.
OBJECT-TYPE    
  INTEGER 1..31  

acSonetFarEndLineDayIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.1.4.2.1.5
This variable indicates if the data for this interval is valid.
OBJECT-TYPE    
  TruthValue  

acSonetFarEndLineDayIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.1.4.2.1.6
Flag to reset the SONET far end line day interval statistics.
OBJECT-TYPE    
  TruthValue  

acSonetFarEndLineDayIntervalESs 1.3.6.1.4.1.2785.2.3.6.1.4.2.1.7
The counter associated with the number of Errored Seconds encountered by a SONET/SDH FarEndLine in a particular day interval in the past 30 days.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndLineDayIntervalSESs 1.3.6.1.4.1.2785.2.3.6.1.4.2.1.8
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH FarEndLine in a particular day interval in the past 30 days.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndLineDayIntervalCVs 1.3.6.1.4.1.2785.2.3.6.1.4.2.1.9
The counter associated with the number of Coding Violations encountered by a SONET/SDH FarEndLine in a particular day interval in the past 30 days.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndLineDayIntervalUASs 1.3.6.1.4.1.2785.2.3.6.1.4.2.1.10
The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH FarEndLine in a particular day interval in the past 30 days.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndLineThresholdTable 1.3.6.1.4.1.2785.2.3.6.1.4.3
The SONET/SDH FarEndLine Threshold Table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetFarEndLineThresholdEntry

acSonetFarEndLineThresholdEntry 1.3.6.1.4.1.2785.2.3.6.1.4.3.1
An entry in the SONET/SDH FarEndLine Threshold Table.
OBJECT-TYPE    
  AcSonetFarEndLineThresholdEntry  

acSonetFarEndLineThresholdNodeId 1.3.6.1.4.1.2785.2.3.6.1.4.3.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetFarEndLineThresholdSlot 1.3.6.1.4.1.2785.2.3.6.1.4.3.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetFarEndLineThresholdPort 1.3.6.1.4.1.2785.2.3.6.1.4.3.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetFarEndLineThresholdSelectionNum 1.3.6.1.4.1.2785.2.3.6.1.4.3.1.4
A number that selects either the 15 thresholds or the day thresholds.
OBJECT-TYPE    
  INTEGER minute(1), day(2)  

acSonetFarEndLineThresholdAdminStatus 1.3.6.1.4.1.2785.2.3.6.1.4.3.1.5
This field is used by the administrator to ensure only one client is performing management operations on this serial port at a time. When the field is read as available(0), the client can write the value locked(1) into this field to prevent a second client from performing managment ops on this instance.
OBJECT-TYPE    
  AcAdminStatus  

acSonetFarEndLineThresholdESs 1.3.6.1.4.1.2785.2.3.6.1.4.3.1.6
The threshold associated with Errored Seconds.
OBJECT-TYPE    
  INTEGER  

acSonetFarEndLineThresholdSESs 1.3.6.1.4.1.2785.2.3.6.1.4.3.1.7
The threshold associated with Severely Errored Seconds.
OBJECT-TYPE    
  INTEGER  

acSonetFarEndLineThresholdCVs 1.3.6.1.4.1.2785.2.3.6.1.4.3.1.8
The threshold associated with Coding Violations.
OBJECT-TYPE    
  INTEGER  

acSonetFarEndLineThresholdUASs 1.3.6.1.4.1.2785.2.3.6.1.4.3.1.9
The threshold associated with Unavailable Secondss.
OBJECT-TYPE    
  INTEGER  

acSonetObjectsPath 1.3.6.1.4.1.2785.2.3.6.2
OBJECT IDENTIFIER    

acSonetPath 1.3.6.1.4.1.2785.2.3.6.2.1
OBJECT IDENTIFIER    

acSonetPath15MinuteIntervalTable 1.3.6.1.4.1.2785.2.3.6.2.1.1
The SONET/SDH Path 15Minute Interval table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetPath15MinuteIntervalEntry

acSonetPath15MinuteIntervalEntry 1.3.6.1.4.1.2785.2.3.6.2.1.1.1
An entry in the SONET/SDH Path 15Minute Interval table.
OBJECT-TYPE    
  AcSonetPath15MinuteIntervalEntry  

acSonetPath15MinuteIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.2.1.1.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetPath15MinuteIntervalSlot 1.3.6.1.4.1.2785.2.3.6.2.1.1.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetPath15MinuteIntervalPort 1.3.6.1.4.1.2785.2.3.6.2.1.1.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetPath15MinuteIntervalPath 1.3.6.1.4.1.2785.2.3.6.2.1.1.1.4
The STS Path for which the set of statistics is available.
OBJECT-TYPE    
  INTEGER  

acSonetPath15MinuteIntervalNumber 1.3.6.1.4.1.2785.2.3.6.2.1.1.1.5
A number between 1 and 98, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current 15 minute interval. The interval identified by 2 is the most recently completed 15 minute interval. The interval identified by 97 is the oldest 15 minute interval. The interval identified by 98 is a total of the previous 96 stored 15 minute intervals.
OBJECT-TYPE    
  INTEGER 1..98  

acSonetPath15MinuteIntervalStatus 1.3.6.1.4.1.2785.2.3.6.2.1.1.1.6
This variable indicates the status of the interface. The acSonetPathCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The acSonetPathNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 acSonetPathNoDefect 2 acSonetPathSTSLOP 4 acSonetPathSTSAIS 8 acSonetPathSTSRDI 16 acSonetPathUnequipped 32 acSonetPathPayloadLabelMismatch
OBJECT-TYPE    
  Integer32 1..62  

acSonetPath15MinuteIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.2.1.1.1.7
This variable indicates if the data for this interval is valid.
OBJECT-TYPE    
  TruthValue  

acSonetPath15MinuteIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.2.1.1.1.8
This flag is used to reset the data for a 15 minute interval.
OBJECT-TYPE    
  TruthValue  

acSonetPath15MinuteIntervalESs 1.3.6.1.4.1.2785.2.3.6.2.1.1.1.9
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Path in the current 15 minute interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetPath15MinuteIntervalSESs 1.3.6.1.4.1.2785.2.3.6.2.1.1.1.10
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path in the current 15 minute interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetPath15MinuteIntervalCVs 1.3.6.1.4.1.2785.2.3.6.2.1.1.1.11
The counter associated with the number of Coding Violations encountered by a SONET/SDH Path in the current 15 minute interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetPath15MinuteIntervalUASs 1.3.6.1.4.1.2785.2.3.6.2.1.1.1.12
The counter associated with the number of Unavailable Seconds encountered by a Path in the current 15 minute interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetPath15MinuteIntervalBER 1.3.6.1.4.1.2785.2.3.6.2.1.1.1.13
The counter associated with the BER encountered by a Path in the current 15 minute interval. Represents the max value for an interval for number > 1.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetPathDayIntervalTable 1.3.6.1.4.1.2785.2.3.6.2.1.2
The SONET/SDH Path Day Interval table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetPathDayIntervalEntry

acSonetPathDayIntervalEntry 1.3.6.1.4.1.2785.2.3.6.2.1.2.1
An entry in the SONET/SDH Path Day Interval table.
OBJECT-TYPE    
  AcSonetPathDayIntervalEntry  

acSonetPathDayIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.2.1.2.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetPathDayIntervalSlot 1.3.6.1.4.1.2785.2.3.6.2.1.2.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetPathDayIntervalPort 1.3.6.1.4.1.2785.2.3.6.2.1.2.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetPathDayIntervalPath 1.3.6.1.4.1.2785.2.3.6.2.1.2.1.4
The STS Path for which the set of statistics is available.
OBJECT-TYPE    
  INTEGER  

acSonetPathDayIntervalNumber 1.3.6.1.4.1.2785.2.3.6.2.1.2.1.5
A number between 1 and 31, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current day performance monitoring interval. The interval identified by 2 is the most recently completed day interval. The interval identified by 31 is the oldest day interval.
OBJECT-TYPE    
  INTEGER 1..31  

acSonetPathDayIntervalStatus 1.3.6.1.4.1.2785.2.3.6.2.1.2.1.6
This variable indicates the status of the interface. The acSonetPathCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The acSonetPathNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 acSonetPathNoDefect 2 acSonetPathSTSLOP 4 acSonetPathSTSAIS 8 acSonetPathSTSRDI 16 acSonetPathUnequipped 32 acSonetPathPayloadLabelMismatch
OBJECT-TYPE    
  Integer32 1..62  

acSonetPathDayIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.2.1.2.1.7
This variable indicates if the data for this day is valid.
OBJECT-TYPE    
  TruthValue  

acSonetPathDayIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.2.1.2.1.8
This flag is used to reset the data for day interval.
OBJECT-TYPE    
  TruthValue  

acSonetPathDayIntervalESs 1.3.6.1.4.1.2785.2.3.6.2.1.2.1.9
The counter associated with the number of Errored Seconds encountered by a SONET/SDH Path in the past day interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetPathDayIntervalSESs 1.3.6.1.4.1.2785.2.3.6.2.1.2.1.10
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path in the past day interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetPathDayIntervalCVs 1.3.6.1.4.1.2785.2.3.6.2.1.2.1.11
The counter associated with the number of Coding Violations encountered by a SONET/SDH Path in the past day interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetPathDayIntervalUASs 1.3.6.1.4.1.2785.2.3.6.2.1.2.1.12
The counter associated with the number of Unavailable Seconds encountered by a Path in the past day interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetPathDayIntervalBER 1.3.6.1.4.1.2785.2.3.6.2.1.2.1.13
The counter associated with the BER encountered by a Path in the past day interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetPathThresholdTable 1.3.6.1.4.1.2785.2.3.6.2.1.3
The SONET/SDH Path Threshold Table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetPathThresholdEntry

acSonetPathThresholdEntry 1.3.6.1.4.1.2785.2.3.6.2.1.3.1
An entry in the SONET/SDH Path Threshold Table.
OBJECT-TYPE    
  AcSonetPathThresholdEntry  

acSonetPathThresholdNodeId 1.3.6.1.4.1.2785.2.3.6.2.1.3.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetPathThresholdSlot 1.3.6.1.4.1.2785.2.3.6.2.1.3.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetPathThresholdPort 1.3.6.1.4.1.2785.2.3.6.2.1.3.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetPathThresholdPath 1.3.6.1.4.1.2785.2.3.6.2.1.3.1.4
The STS Path for which the set of statistics is available.
OBJECT-TYPE    
  INTEGER  

acSonetPathThresholdSelectionNum 1.3.6.1.4.1.2785.2.3.6.2.1.3.1.5
A number that selects either the 15 thresholds or the day thresholds.
OBJECT-TYPE    
  INTEGER minute(1), day(2)  

acSonetPathThresholdAdminStatus 1.3.6.1.4.1.2785.2.3.6.2.1.3.1.6
This field is used by the administrator to ensure only one client is performing management operations on this serial port at a time. When the field is read as available(0), the client can write the value locked(1) into this field to prevent a second client from performing managment ops on this instance.
OBJECT-TYPE    
  AcAdminStatus  

acSonetPathThresholdESs 1.3.6.1.4.1.2785.2.3.6.2.1.3.1.7
The threshold associated with Errored Seconds.
OBJECT-TYPE    
  INTEGER  

acSonetPathThresholdSESs 1.3.6.1.4.1.2785.2.3.6.2.1.3.1.8
The threshold associated with Severely Errored Seconds.
OBJECT-TYPE    
  INTEGER  

acSonetPathThresholdCVs 1.3.6.1.4.1.2785.2.3.6.2.1.3.1.9
The threshold associated with Coding Violations.
OBJECT-TYPE    
  INTEGER  

acSonetPathThresholdUASs 1.3.6.1.4.1.2785.2.3.6.2.1.3.1.10
The threshold associated with Unavailable Seconds.
OBJECT-TYPE    
  INTEGER  

acSonetPathRDITable 1.3.6.1.4.1.2785.2.3.6.2.1.4
The SONET/SDH Path RDI Table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetPathRDIEntry

acSonetPathRDIEntry 1.3.6.1.4.1.2785.2.3.6.2.1.4.1
An entry in the SONET/SDH Path RDI Table.
OBJECT-TYPE    
  AcSonetPathRDIEntry  

acSonetPathRDINodeId 1.3.6.1.4.1.2785.2.3.6.2.1.4.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetPathRDISlot 1.3.6.1.4.1.2785.2.3.6.2.1.4.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetPathRDIPort 1.3.6.1.4.1.2785.2.3.6.2.1.4.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetPathRDIPath 1.3.6.1.4.1.2785.2.3.6.2.1.4.1.4
The STS path instance for this port
OBJECT-TYPE    
  INTEGER  

acSonetPathRDIOpMode 1.3.6.1.4.1.2785.2.3.6.2.1.4.1.5
The Remote Defect Indiction signals have undergone a number of changes over the years, and now encompass two or even three different versions. See GR-253 6.2.1.3.2 for more information.
OBJECT-TYPE    
  INTEGER rdi(1), erdi(2)  

acSonetPathTIMTable 1.3.6.1.4.1.2785.2.3.6.2.1.5
The SONET/SDH Path Trace Identifier Mismatch Table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetPathTIMEntry

acSonetPathTIMEntry 1.3.6.1.4.1.2785.2.3.6.2.1.5.1
An entry in the SONET/SDH Path Trace Identifier Mismatch Table.
OBJECT-TYPE    
  AcSonetPathTIMEntry  

acSonetPathTIMNodeId 1.3.6.1.4.1.2785.2.3.6.2.1.5.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetPathTIMSlot 1.3.6.1.4.1.2785.2.3.6.2.1.5.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetPathTIMPort 1.3.6.1.4.1.2785.2.3.6.2.1.5.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetPathTIMPath 1.3.6.1.4.1.2785.2.3.6.2.1.5.1.4
The path instance of the port.
OBJECT-TYPE    
  INTEGER  

acSonetPathTIMGenerateEnable 1.3.6.1.4.1.2785.2.3.6.2.1.5.1.5
Enables the generation of the Path Trace Identifier.
OBJECT-TYPE    
  TruthValue  

acSonetPathTIMDetectEnable 1.3.6.1.4.1.2785.2.3.6.2.1.5.1.6
Enables the detection of the Path Trace Identifier.
OBJECT-TYPE    
  TruthValue  

acSonetPathTIMTransmitedString 1.3.6.1.4.1.2785.2.3.6.2.1.5.1.7
The string that gets sent to the destination.
OBJECT-TYPE    
  AcTraceString  

acSonetPathTIMExpectedString 1.3.6.1.4.1.2785.2.3.6.2.1.5.1.8
The expected string that is to be received.
OBJECT-TYPE    
  AcTraceString  

acSonetPathTIMReceivedString 1.3.6.1.4.1.2785.2.3.6.2.1.5.1.9
The contents of the string that is received.
OBJECT-TYPE    
  AcTraceString  

acSonetPathTIMFailure 1.3.6.1.4.1.2785.2.3.6.2.1.5.1.10
Failure declared of the Path Trace Identifier.
OBJECT-TYPE    
  TruthValue  

acSonetPathTIMFormat 1.3.6.1.4.1.2785.2.3.6.2.1.5.1.11
Format of Path Trace buffer.
OBJECT-TYPE    
  INTEGER void(0), t64(1), t64-crlf(2), t16(3), t16-msb1(4), t16-crc7(5)  

acSonetPathTIMMismatchZeros 1.3.6.1.4.1.2785.2.3.6.2.1.5.1.12
Controls whether a received trace message containing all zeros can cause a mismatch defect.
OBJECT-TYPE    
  TruthValue  

acSonetPathPLMTable 1.3.6.1.4.1.2785.2.3.6.2.1.6
The SONET/SDH Path Payload Label Mismatch Table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetPathPLMEntry

acSonetPathPLMEntry 1.3.6.1.4.1.2785.2.3.6.2.1.6.1
An entry in the SONET/SDH Path Payload Label Mismatch Table.
OBJECT-TYPE    
  AcSonetPathPLMEntry  

acSonetPathPLMNodeId 1.3.6.1.4.1.2785.2.3.6.2.1.6.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetPathPLMSlot 1.3.6.1.4.1.2785.2.3.6.2.1.6.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetPathPLMPort 1.3.6.1.4.1.2785.2.3.6.2.1.6.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetPathPLMPath 1.3.6.1.4.1.2785.2.3.6.2.1.6.1.4
The path instance of the port.
OBJECT-TYPE    
  INTEGER  

acSonetPathPLMDetectEnable 1.3.6.1.4.1.2785.2.3.6.2.1.6.1.5
Enables the detection of the Path Payload Label.
OBJECT-TYPE    
  TruthValue  

acSonetPathPLMTransmitedValue 1.3.6.1.4.1.2785.2.3.6.2.1.6.1.6
The Path Payload Label that gets sent to the destination. See GR-253 Tables 3-2, 3-3.
OBJECT-TYPE    
  INTEGER 0..255  

acSonetPathPLMExpectedValue 1.3.6.1.4.1.2785.2.3.6.2.1.6.1.7
The expected Path Payload Label that is to be received. See GR-253 Tables 3-2, 3-3.
OBJECT-TYPE    
  INTEGER 0..255  

acSonetPathPLMReceivedValue 1.3.6.1.4.1.2785.2.3.6.2.1.6.1.8
The contents of the Path Payload Label that is received. See GR-253 Tables 3-2, 3-3.
OBJECT-TYPE    
  INTEGER  

acSonetPathPLMMismatchFailure 1.3.6.1.4.1.2785.2.3.6.2.1.6.1.9
Mismatch failure declared for the Path Payload Label.
OBJECT-TYPE    
  TruthValue  

acSonetPathPLMUnequipped 1.3.6.1.4.1.2785.2.3.6.2.1.6.1.10
Unequipped failure declared for the Path Payload Label.
OBJECT-TYPE    
  TruthValue  

acSonetPathProtectionTable 1.3.6.1.4.1.2785.2.3.6.2.1.7
The SONET/SDH Path Protection table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetPathProtectionEntry

acSonetPathProtectionEntry 1.3.6.1.4.1.2785.2.3.6.2.1.7.1
An entry in the SONET/SDH Path Protection table.
OBJECT-TYPE    
  AcSonetPathProtectionEntry  

acSonetPathProtectionNodeId 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetPathProtectionSlot 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetPathProtectionPort 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetPathProtectionPath 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.4
The STS-1 path for the port.
OBJECT-TYPE    
  INTEGER  

acSonetPathProtectionSwitchType 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.5
This variable defines the path switch type as either revertive or nonrevertive.
OBJECT-TYPE    
  INTEGER revertive(1), nonrevertive(2)  

acSonetPathProtectionSFThreshold 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.6
The threshold associated with Signal Fail (SF). This value determines the BER level for protection switching. The value used is the exponent to a power of 10, so 3 means 10E-3.
OBJECT-TYPE    
  Integer32 3..5  

acSonetPathProtectionSDThreshold 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.7
The threshold associated with Signal Degrade (SD). This value determines the BER level for protection switching. The value used is the exponent to a power of 10, so 6 means 10E-6.
OBJECT-TYPE    
  Integer32 5..9  

acSonetPathProtectionActiveTraffic 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.8
This variable indicates when ODP or UPSR active traffic is on this path.
OBJECT-TYPE    
  TruthValue  

acSonetPathProtectionProtectionSwitch 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.9
This variable indicates when either a UPSR or an ODP protection switch is currently affecting this path.
OBJECT-TYPE    
  TruthValue  

acSonetPathProtectionWTRTime 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.10
This variable defines the ODP or UPSR Wait To Restore time. The time has one second granularity and may have a value in the range from 1 second to 720 seconds(12 minutes).
OBJECT-TYPE    
  Integer32 1..720  

acSonetPathProtectionWTITime 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.11
This variable defines the ODP Wait To Idle time. The time has one second granularity and may have a value in the range from 1 to 50 seconds.
OBJECT-TYPE    
  Integer32 1..50  

acSonetPathProtectionWTCTime 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.12
This variable defines the ODP Wait To Clear time. The time has one second granularity and may have a value in the range from 1 second to 720 seconds (12 minutes).
OBJECT-TYPE    
  Integer32 1..720  

acSonetPathProtectionWTRelTime 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.13
This variable defines the ODP Wait To Release time. The time has one second granularity and may have a value in the range from 1 to 50 seconds.
OBJECT-TYPE    
  Integer32 1..50  

acSonetPathProtectionManSwitch 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.14
This variable defines the ODP and UPSR manually initiated commands. Entries 7..10 are used in ODP only.
OBJECT-TYPE    
  INTEGER clear(1), lockout-protection(2), force-working(3), force-protection(4), manual-working(5), manual-protection(6), exercise(7), lockout-working(8), clear-lockout-working(9), extra-traffic(10)  

acSonetPathProtectionSwitchOpStatus 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.15
This variable defines the current switch condition of an ODP path.
OBJECT-TYPE    
  INTEGER idle(1), bridged(2), switched(3), passthrough(4), extra-traffic(5)  

acSonetPathProtectionProtectionMode 1.3.6.1.4.1.2785.2.3.6.2.1.7.1.16
!! This object *MUST* be set before any other object is accessed. !! This is the type of protection switching to be used if independent path level protection switching is enabled. This is similar to the acTimeSlotPathProtectionMode object that resides in the timeslot table. Refer to it for a description of the enumerations.
OBJECT-TYPE    
  INTEGER odp(1), upsr(2)  

acSonetFarEndPath 1.3.6.1.4.1.2785.2.3.6.2.2
OBJECT IDENTIFIER    

acSonetFarEndPath15MinuteIntervalTable 1.3.6.1.4.1.2785.2.3.6.2.2.1
The SONET/SDH FarEndPath 15Minute Interval table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetFarEndPath15MinuteIntervalEntry

acSonetFarEndPath15MinuteIntervalEntry 1.3.6.1.4.1.2785.2.3.6.2.2.1.1
An entry in the SONET/SDH FarEndPath 15Minute Interval table.
OBJECT-TYPE    
  AcSonetFarEndPath15MinuteIntervalEntry  

acSonetFarEndPath15MinuteIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.2.2.1.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetFarEndPath15MinuteIntervalSlot 1.3.6.1.4.1.2785.2.3.6.2.2.1.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetFarEndPath15MinuteIntervalPort 1.3.6.1.4.1.2785.2.3.6.2.2.1.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetFarEndPath15MinuteIntervalPath 1.3.6.1.4.1.2785.2.3.6.2.2.1.1.4
The STS Path for which the set of statistics is available.
OBJECT-TYPE    
  INTEGER  

acSonetFarEndPath15MinuteIntervalNumber 1.3.6.1.4.1.2785.2.3.6.2.2.1.1.5
A number between 1 and 98, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current 15 minute interval. The interval identified by 2 is the most recently completed 15 minute interval. The interval identified by 97 is the oldest 15 minute interval. The interval identified by 98 is a total of the previous 96 stored 15 minute intervals.
OBJECT-TYPE    
  INTEGER 1..98  

acSonetFarEndPath15MinuteIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.2.2.1.1.6
This variable indicates if the data for this far end 15 minute interval is valid.
OBJECT-TYPE    
  TruthValue  

acSonetFarEndPath15MinuteIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.2.2.1.1.7
This flag is used to reset the data for far end 15 minute interval.
OBJECT-TYPE    
  TruthValue  

acSonetFarEndPath15MinuteIntervalESs 1.3.6.1.4.1.2785.2.3.6.2.2.1.1.8
The counter associated with the number of Errored Seconds encountered by a SONET/SDH FarEndPath in the current 15 minute interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndPath15MinuteIntervalSESs 1.3.6.1.4.1.2785.2.3.6.2.2.1.1.9
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH FarEndPath in the current 15 minute interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndPath15MinuteIntervalCVs 1.3.6.1.4.1.2785.2.3.6.2.2.1.1.10
The counter associated with the number of Coding Violations encountered by a SONET/SDH FarEndPath in the current 15 minute interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndPath15MinuteIntervalUASs 1.3.6.1.4.1.2785.2.3.6.2.2.1.1.11
The counter associated with the number of Unavailable Seconds encountered by a FarEndPath in the current 15 minute interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndPathDayIntervalTable 1.3.6.1.4.1.2785.2.3.6.2.2.2
The SONET/SDH FarEndPath Day Interval table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetFarEndPathDayIntervalEntry

acSonetFarEndPathDayIntervalEntry 1.3.6.1.4.1.2785.2.3.6.2.2.2.1
An entry in the SONET/SDH FarEndPath Day Interval table.
OBJECT-TYPE    
  AcSonetFarEndPathDayIntervalEntry  

acSonetFarEndPathDayIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.2.2.2.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetFarEndPathDayIntervalSlot 1.3.6.1.4.1.2785.2.3.6.2.2.2.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetFarEndPathDayIntervalPort 1.3.6.1.4.1.2785.2.3.6.2.2.2.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetFarEndPathDayIntervalPath 1.3.6.1.4.1.2785.2.3.6.2.2.2.1.4
The STS Path for which the set of statistics is available.
OBJECT-TYPE    
  INTEGER  

acSonetFarEndPathDayIntervalNumber 1.3.6.1.4.1.2785.2.3.6.2.2.2.1.5
A number between 1 and 31, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current day performance monitoring interval. The interval identified by 2 is the most recently completed day interval. The interval identified by 31 is the oldest day interval.
OBJECT-TYPE    
  INTEGER 1..31  

acSonetFarEndPathDayIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.2.2.2.1.6
This variable indicates if the data for this far end day interval is valid.
OBJECT-TYPE    
  TruthValue  

acSonetFarEndPathDayIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.2.2.2.1.7
This flag is used to reset the data for far end day interval.
OBJECT-TYPE    
  TruthValue  

acSonetFarEndPathDayIntervalESs 1.3.6.1.4.1.2785.2.3.6.2.2.2.1.8
The counter associated with the number of Errored Seconds encountered by a SONET/SDH FarEndPath in the current 15 minute interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndPathDayIntervalSESs 1.3.6.1.4.1.2785.2.3.6.2.2.2.1.9
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH FarEndPath in the current 15 minute interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndPathDayIntervalCVs 1.3.6.1.4.1.2785.2.3.6.2.2.2.1.10
The counter associated with the number of Coding Violations encountered by a SONET/SDH FarEndPath in the current 15 minute interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndPathDayIntervalUASs 1.3.6.1.4.1.2785.2.3.6.2.2.2.1.11
The counter associated with the number of Unavailable Seconds encountered by a FarEndPath in the current 15 minute interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndPathThresholdTable 1.3.6.1.4.1.2785.2.3.6.2.2.3
The SONET/SDH FarEndPath Threshold Table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetFarEndPathThresholdEntry

acSonetFarEndPathThresholdEntry 1.3.6.1.4.1.2785.2.3.6.2.2.3.1
An entry in the SONET/SDH FarEndPath Threshold Table.
OBJECT-TYPE    
  AcSonetFarEndPathThresholdEntry  

acSonetFarEndPathThresholdNodeId 1.3.6.1.4.1.2785.2.3.6.2.2.3.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetFarEndPathThresholdSlot 1.3.6.1.4.1.2785.2.3.6.2.2.3.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetFarEndPathThresholdPort 1.3.6.1.4.1.2785.2.3.6.2.2.3.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetFarEndPathThresholdPath 1.3.6.1.4.1.2785.2.3.6.2.2.3.1.4
The STS Path for which the set of statistics is available.
OBJECT-TYPE    
  INTEGER  

acSonetFarEndPathThresholdSelectionNum 1.3.6.1.4.1.2785.2.3.6.2.2.3.1.5
A number that selects either the 15 thresholds or the day thresholds.
OBJECT-TYPE    
  INTEGER minute(1), day(2)  

acSonetFarEndPathThresholdAdminStatus 1.3.6.1.4.1.2785.2.3.6.2.2.3.1.6
This field is used by the administrator to ensure only one client is performing management operations on this serial port at a time. When the field is read as available(0), the client can write the value locked(1) into this field to prevent a second client from performing managment ops on this instance.
OBJECT-TYPE    
  AcAdminStatus  

acSonetFarEndPathThresholdESs 1.3.6.1.4.1.2785.2.3.6.2.2.3.1.7
The threshold associated with Errored Seconds.
OBJECT-TYPE    
  INTEGER  

acSonetFarEndPathThresholdSESs 1.3.6.1.4.1.2785.2.3.6.2.2.3.1.8
The threshold associated with Severely Errored Seconds.
OBJECT-TYPE    
  INTEGER  

acSonetFarEndPathThresholdCVs 1.3.6.1.4.1.2785.2.3.6.2.2.3.1.9
The threshold associated with Coding Violations.
OBJECT-TYPE    
  INTEGER  

acSonetFarEndPathThresholdUASs 1.3.6.1.4.1.2785.2.3.6.2.2.3.1.10
The threshold associated with Unavailable Secondss.
OBJECT-TYPE    
  INTEGER  

acSonetObjectsVT 1.3.6.1.4.1.2785.2.3.6.3
OBJECT IDENTIFIER    

acSonetVT 1.3.6.1.4.1.2785.2.3.6.3.1
OBJECT IDENTIFIER    

acSonetVT15MinuteIntervalTable 1.3.6.1.4.1.2785.2.3.6.3.1.1
The SONET/SDH VT 15Minute Interval table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetVT15MinuteIntervalEntry

acSonetVT15MinuteIntervalEntry 1.3.6.1.4.1.2785.2.3.6.3.1.1.1
An entry in the SONET/SDH VT 15Minute Interval table.
OBJECT-TYPE    
  AcSonetVT15MinuteIntervalEntry  

acSonetVT15MinuteIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.3.1.1.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetVT15MinuteIntervalSlot 1.3.6.1.4.1.2785.2.3.6.3.1.1.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetVT15MinuteIntervalPort 1.3.6.1.4.1.2785.2.3.6.3.1.1.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetVT15MinuteIntervalVT 1.3.6.1.4.1.2785.2.3.6.3.1.1.1.4
The VT for which the set of statistics is available.
OBJECT-TYPE    
  INTEGER  

acSonetVT15MinuteIntervalNumber 1.3.6.1.4.1.2785.2.3.6.3.1.1.1.5
A number between 1 and 98, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current 15 minute interval. The interval identified by 2 is the most recently completed 15 minute interval. The interval identified by 97 is the oldest 15 minute interval. The interval identified by 98 is a total of the previous 96 stored 15 minute intervals.
OBJECT-TYPE    
  INTEGER 1..98  

acSonetVT15MinuteIntervalStatus 1.3.6.1.4.1.2785.2.3.6.3.1.1.1.7
This variable indicates the status of the interface. The acSonetVTCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects and failures simultaneously. The acSonetVTNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 acSonetVTNoDefect 2 acSonetVTLOP 4 acSonetVTPathAIS 8 acSonetVTPathRDI 16 acSonetVTPathRFI 32 acSonetVTUnequipped 64 acSonetVTPayloadLabelMismatch
OBJECT-TYPE    
  Integer32 1..192  

acSonetVT15MinuteIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.3.1.1.1.8
This variable indicates if the data for this VT 15 minute interval is valid.
OBJECT-TYPE    
  TruthValue  

acSonetVT15MinuteIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.3.1.1.1.9
This flag is used to reset the data for this VT 15 minute interval.
OBJECT-TYPE    
  TruthValue  

acSonetVT15MinuteIntervalESs 1.3.6.1.4.1.2785.2.3.6.3.1.1.1.10
The counter associated with the number of Errored Seconds encountered by a SONET/SDH VT in the current 15 minute interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetVT15MinuteIntervalSESs 1.3.6.1.4.1.2785.2.3.6.3.1.1.1.11
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH VT in the current 15 minute interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetVT15MinuteIntervalCVs 1.3.6.1.4.1.2785.2.3.6.3.1.1.1.12
The counter associated with the number of Coding Violations encountered by a SONET/SDH VT in the current 15 minute interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetVT15MinuteIntervalUASs 1.3.6.1.4.1.2785.2.3.6.3.1.1.1.13
The counter associated with the number of Unavailable Seconds encountered by a VT in the current 15 minute interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetVT15MinuteIntervalBER 1.3.6.1.4.1.2785.2.3.6.3.1.1.1.14
The counter associated with the BER encountered by a VT in the current 15 minute interval. Represents the max BER for the interval when number > 1.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetVTDayIntervalTable 1.3.6.1.4.1.2785.2.3.6.3.1.2
The SONET/SDH VT Day Interval table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetVTDayIntervalEntry

acSonetVTDayIntervalEntry 1.3.6.1.4.1.2785.2.3.6.3.1.2.1
An entry in the SONET/SDH VT Day Interval table.
OBJECT-TYPE    
  AcSonetVTDayIntervalEntry  

acSonetVTDayIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.3.1.2.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetVTDayIntervalSlot 1.3.6.1.4.1.2785.2.3.6.3.1.2.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetVTDayIntervalPort 1.3.6.1.4.1.2785.2.3.6.3.1.2.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetVTDayIntervalVT 1.3.6.1.4.1.2785.2.3.6.3.1.2.1.4
The VT for which the set of statistics is available.
OBJECT-TYPE    
  INTEGER  

acSonetVTDayIntervalNumber 1.3.6.1.4.1.2785.2.3.6.3.1.2.1.5
A number between 1 and 31, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current day performance monitoring interval. The interval identified by 2 is the most recently completed day interval. The interval identified by 31 is the oldest day interval.
OBJECT-TYPE    
  INTEGER 1..31  

acSonetVTDayIntervalStatus 1.3.6.1.4.1.2785.2.3.6.3.1.2.1.6
This variable indicates the status of the interface. The acSonetVTCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects and failures simultaneously. The acSonetVTNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 acSonetVTNoDefect 2 acSonetVTLOP 4 acSonetVTPathAIS 8 acSonetVTPathRDI 16 acSonetVTPathRFI 32 acSonetVTUnequipped 64 acSonetVTPayloadLabelMismatch
OBJECT-TYPE    
  Integer32 1..192  

acSonetVTDayIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.3.1.2.1.7
This variable indicates if the data for this VT Day interval is valid.
OBJECT-TYPE    
  TruthValue  

acSonetVTDayIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.3.1.2.1.8
This flag is used to reset the data for this VT Day interval.
OBJECT-TYPE    
  TruthValue  

acSonetVTDayIntervalESs 1.3.6.1.4.1.2785.2.3.6.3.1.2.1.9
The counter associated with the number of Errored Seconds encountered by a SONET/SDH VT in the last day interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetVTDayIntervalSESs 1.3.6.1.4.1.2785.2.3.6.3.1.2.1.10
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH VT in the last day interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetVTDayIntervalCVs 1.3.6.1.4.1.2785.2.3.6.3.1.2.1.11
The counter associated with the number of Coding Violations encountered by a SONET/SDH VT in the last day interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetVTDayIntervalUASs 1.3.6.1.4.1.2785.2.3.6.3.1.2.1.12
The counter associated with the number of Unavailable Seconds encountered by a VT in the last day interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetVTDayIntervalBER 1.3.6.1.4.1.2785.2.3.6.3.1.2.1.13
The counter associated with the max BER encountered by a VT in a day.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetVTThresholdTable 1.3.6.1.4.1.2785.2.3.6.3.1.3
The SONET/SDH VT Threshold Table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetVTThresholdEntry

acSonetVTThresholdEntry 1.3.6.1.4.1.2785.2.3.6.3.1.3.1
An entry in the SONET/SDH VT Threshold Table.
OBJECT-TYPE    
  AcSonetVTThresholdEntry  

acSonetVTThresholdNodeId 1.3.6.1.4.1.2785.2.3.6.3.1.3.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetVTThresholdSlot 1.3.6.1.4.1.2785.2.3.6.3.1.3.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetVTThresholdPort 1.3.6.1.4.1.2785.2.3.6.3.1.3.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetVTThresholdVT 1.3.6.1.4.1.2785.2.3.6.3.1.3.1.4
The VT for which the set of statistics is available.
OBJECT-TYPE    
  INTEGER  

acSonetVTThresholdSelectionNum 1.3.6.1.4.1.2785.2.3.6.3.1.3.1.5
A number that selects either the 15 thresholds or the day thresholds.
OBJECT-TYPE    
  INTEGER minute(1), day(2)  

acSonetVTThresholdAdminStatus 1.3.6.1.4.1.2785.2.3.6.3.1.3.1.6
This field is used by the administrator to ensure only one client is performing management operations on this serial port at a time. When the field is read as available(0), the client can write the value locked(1) into this field to prevent a second client from performing managment ops on this instance.
OBJECT-TYPE    
  AcAdminStatus  

acSonetVTThresholdESs 1.3.6.1.4.1.2785.2.3.6.3.1.3.1.7
The threshold associated with Errored Seconds.
OBJECT-TYPE    
  INTEGER  

acSonetVTThresholdSESs 1.3.6.1.4.1.2785.2.3.6.3.1.3.1.8
The threshold associated with Severely Errored Seconds.
OBJECT-TYPE    
  INTEGER  

acSonetVTThresholdCVs 1.3.6.1.4.1.2785.2.3.6.3.1.3.1.9
The threshold associated with Coding Violations.
OBJECT-TYPE    
  INTEGER  

acSonetVTThresholdUASs 1.3.6.1.4.1.2785.2.3.6.3.1.3.1.10
The threshold associated with Unavailable Secondss.
OBJECT-TYPE    
  INTEGER  

acSonetVTRDITable 1.3.6.1.4.1.2785.2.3.6.3.1.4
The SONET/SDH VT RDI Table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetVTRDIEntry

acSonetVTRDIEntry 1.3.6.1.4.1.2785.2.3.6.3.1.4.1
An entry in the SONET/SDH VT RDI Table.
OBJECT-TYPE    
  AcSonetVTRDIEntry  

acSonetVTRDINodeId 1.3.6.1.4.1.2785.2.3.6.3.1.4.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetVTRDISlot 1.3.6.1.4.1.2785.2.3.6.3.1.4.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetVTRDIPort 1.3.6.1.4.1.2785.2.3.6.3.1.4.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetVTRDIVT 1.3.6.1.4.1.2785.2.3.6.3.1.4.1.4
The Virtual Tributary (VT) instance.
OBJECT-TYPE    
  INTEGER  

acSonetVTRDIOpMode 1.3.6.1.4.1.2785.2.3.6.3.1.4.1.5
The Remote Defect Indiction signals have undergone a number of changes over the years, and now encompass two or even three different versions. See GR-253 6.2.1.3.3 for more information.
OBJECT-TYPE    
  INTEGER rdi(1), erdi(2)  

acSonetVTPLMTable 1.3.6.1.4.1.2785.2.3.6.3.1.5
The SONET/SDH VT Payload Label Mismatch Table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetVTPLMEntry

acSonetVTPLMEntry 1.3.6.1.4.1.2785.2.3.6.3.1.5.1
An entry in the SONET/SDH VT Payload Label Mismatch Table.
OBJECT-TYPE    
  AcSonetVTPLMEntry  

acSonetVTPLMNodeId 1.3.6.1.4.1.2785.2.3.6.3.1.5.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetVTPLMSlot 1.3.6.1.4.1.2785.2.3.6.3.1.5.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetVTPLMPort 1.3.6.1.4.1.2785.2.3.6.3.1.5.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetVTPLMVT 1.3.6.1.4.1.2785.2.3.6.3.1.5.1.4
The Virtual Tributary (VT) instance.
OBJECT-TYPE    
  INTEGER  

acSonetVTPLMDetectEnable 1.3.6.1.4.1.2785.2.3.6.3.1.5.1.5
Enables the detection of the VT Payload Label.
OBJECT-TYPE    
  TruthValue  

acSonetVTPLMTransmitedValue 1.3.6.1.4.1.2785.2.3.6.3.1.5.1.6
The VT Payload Label that gets sent to the destination. See GR-253 Tables 3-4.
OBJECT-TYPE    
  INTEGER 0..255  

acSonetVTPLMExpectedValue 1.3.6.1.4.1.2785.2.3.6.3.1.5.1.7
The expected VT Payload Label that is to be received. See GR-253 Tables 3-4.
OBJECT-TYPE    
  INTEGER 0..255  

acSonetVTPLMReceivedValue 1.3.6.1.4.1.2785.2.3.6.3.1.5.1.8
The contents of the VT Payload Label that is received. See GR-253 Tables 3-4.
OBJECT-TYPE    
  INTEGER  

acSonetVTPLMMismatchFailure 1.3.6.1.4.1.2785.2.3.6.3.1.5.1.9
Mismatch failure declared for the VT Payload Label.
OBJECT-TYPE    
  TruthValue  

acSonetVTPLMUnequipped 1.3.6.1.4.1.2785.2.3.6.3.1.5.1.10
Unequipped failure declared for the VT Payload Label.
OBJECT-TYPE    
  TruthValue  

acSonetVTProtectionTable 1.3.6.1.4.1.2785.2.3.6.3.1.6
The SONET/SDH VT Protection table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetVTProtectionEntry

acSonetVTProtectionEntry 1.3.6.1.4.1.2785.2.3.6.3.1.6.1
An entry in the SONET/SDH VT Protection table.
OBJECT-TYPE    
  AcSonetVTProtectionEntry  

acSonetVTProtectionNodeId 1.3.6.1.4.1.2785.2.3.6.3.1.6.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetVTProtectionSlot 1.3.6.1.4.1.2785.2.3.6.3.1.6.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetVTProtectionPort 1.3.6.1.4.1.2785.2.3.6.3.1.6.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetVTProtectionVT 1.3.6.1.4.1.2785.2.3.6.3.1.6.1.4
The VT path instance for the port.
OBJECT-TYPE    
  INTEGER  

acSonetVTProtectionSwitchType 1.3.6.1.4.1.2785.2.3.6.3.1.6.1.5
This variable defines the VT path switch type as either revertive or nonrevertive.
OBJECT-TYPE    
  INTEGER revertive(1), nonrevertive(2)  

acSonetVTProtectionSFThreshold 1.3.6.1.4.1.2785.2.3.6.3.1.6.1.6
The threshold associated with Signal Fail (SF). This value determines the BER level for protection switching.
OBJECT-TYPE    
  Integer32 3..5  

acSonetVTProtectionSDThreshold 1.3.6.1.4.1.2785.2.3.6.3.1.6.1.7
The threshold associated with Signal Degrade (SD). This value determines the BER level for protection switching.
OBJECT-TYPE    
  Integer32 5..8  

acSonetVTProtectionProtectionSwitch 1.3.6.1.4.1.2785.2.3.6.3.1.6.1.8
This variable indicates when a protection switch is currently affecting this path.
OBJECT-TYPE    
  TruthValue  

acSonetVTProtectionWTRTime 1.3.6.1.4.1.2785.2.3.6.3.1.6.1.9
This variable defines the UPSR Wait To Restore time. The time has one second granularity and may have a value in the range from 1 second to 720 seconds(12 minutes).
OBJECT-TYPE    
  Integer32 1..720  

acSonetVTProtectionManSwitch 1.3.6.1.4.1.2785.2.3.6.3.1.6.1.10
This variable defines the UPSR manually initiated commands.
OBJECT-TYPE    
  INTEGER clear(1), lockout-protection(2), force-working(3), force-protection(4), manual-working(5), manual-protection(6)  

acSonetVTProtectionActiveTraffic 1.3.6.1.4.1.2785.2.3.6.3.1.6.1.11
This variable indicates when UPSR active traffic is on this path.
OBJECT-TYPE    
  TruthValue  

acSonetFarEndVT 1.3.6.1.4.1.2785.2.3.6.3.2
OBJECT IDENTIFIER    

acSonetFarEndVT15MinuteIntervalTable 1.3.6.1.4.1.2785.2.3.6.3.2.1
The SONET/SDH FarEndVT 15Minute Interval table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetFarEndVT15MinuteIntervalEntry

acSonetFarEndVT15MinuteIntervalEntry 1.3.6.1.4.1.2785.2.3.6.3.2.1.1
An entry in the SONET/SDH FarEndVT 15Minute Interval table.
OBJECT-TYPE    
  AcSonetFarEndVT15MinuteIntervalEntry  

acSonetFarEndVT15MinuteIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.3.2.1.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetFarEndVT15MinuteIntervalSlot 1.3.6.1.4.1.2785.2.3.6.3.2.1.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetFarEndVT15MinuteIntervalPort 1.3.6.1.4.1.2785.2.3.6.3.2.1.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetFarEndVT15MinuteIntervalVT 1.3.6.1.4.1.2785.2.3.6.3.2.1.1.4
The VT for which the set of statistics is available.
OBJECT-TYPE    
  INTEGER  

acSonetFarEndVT15MinuteIntervalNumber 1.3.6.1.4.1.2785.2.3.6.3.2.1.1.5
A number between 1 and 98, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current 15 minute interval. The interval identified by 2 is the most recently completed 15 minute interval. The interval identified by 97 is the oldest 15 minute interval. The interval identified by 98 is a total of the previous 96 stored 15 minute intervals.
OBJECT-TYPE    
  INTEGER 1..98  

acSonetFarEndVT15MinuteIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.3.2.1.1.6
This variable indicates if the data for this VT FE 15 minute interval is valid.
OBJECT-TYPE    
  TruthValue  

acSonetFarEndVT15MinuteIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.3.2.1.1.7
This flag is used to reset the data for this VT FE 15 minute interval.
OBJECT-TYPE    
  TruthValue  

acSonetFarEndVT15MinuteIntervalESs 1.3.6.1.4.1.2785.2.3.6.3.2.1.1.8
The counter associated with the number of Errored Seconds encountered by a SONET/SDH FarEndVT in the current 15 minute interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndVT15MinuteIntervalSESs 1.3.6.1.4.1.2785.2.3.6.3.2.1.1.9
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH FarEndVT in the current 15 minute interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndVT15MinuteIntervalCVs 1.3.6.1.4.1.2785.2.3.6.3.2.1.1.10
The counter associated with the number of Coding Violations encountered by a SONET/SDH FarEndVT in the current 15 minute interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndVT15MinuteIntervalUASs 1.3.6.1.4.1.2785.2.3.6.3.2.1.1.11
The counter associated with the number of Unavailable Seconds encountered by a FarEndVT in the current 15 minute interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndVTDayIntervalTable 1.3.6.1.4.1.2785.2.3.6.3.2.2
The SONET/SDH FarEndVT Day Interval table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetFarEndVTDayIntervalEntry

acSonetFarEndVTDayIntervalEntry 1.3.6.1.4.1.2785.2.3.6.3.2.2.1
An entry in the SONET/SDH FarEndVT Day Interval table.
OBJECT-TYPE    
  AcSonetFarEndVTDayIntervalEntry  

acSonetFarEndVTDayIntervalNodeId 1.3.6.1.4.1.2785.2.3.6.3.2.2.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetFarEndVTDayIntervalSlot 1.3.6.1.4.1.2785.2.3.6.3.2.2.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetFarEndVTDayIntervalPort 1.3.6.1.4.1.2785.2.3.6.3.2.2.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetFarEndVTDayIntervalVT 1.3.6.1.4.1.2785.2.3.6.3.2.2.1.4
The VT for which the set of statistics is available.
OBJECT-TYPE    
  INTEGER  

acSonetFarEndVTDayIntervalNumber 1.3.6.1.4.1.2785.2.3.6.3.2.2.1.5
A number between 1 and 31, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current day performance monitoring interval. The interval identified by 2 is the most recently completed day interval. The interval identified by 31 is the oldest day interval.
OBJECT-TYPE    
  INTEGER 1..31  

acSonetFarEndVTDayIntervalValidStats 1.3.6.1.4.1.2785.2.3.6.3.2.2.1.6
This variable indicates if the data for this VT Day interval is valid.
OBJECT-TYPE    
  TruthValue  

acSonetFarEndVTDayIntervalResetStats 1.3.6.1.4.1.2785.2.3.6.3.2.2.1.7
This flag is used to reset the data for this VT Day interval.
OBJECT-TYPE    
  TruthValue  

acSonetFarEndVTDayIntervalESs 1.3.6.1.4.1.2785.2.3.6.3.2.2.1.8
The counter associated with the number of Errored Seconds encountered by a SONET/SDH FarEndVT in the current 15 minute interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndVTDayIntervalSESs 1.3.6.1.4.1.2785.2.3.6.3.2.2.1.9
The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH FarEndVT in the current 15 minute interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndVTDayIntervalCVs 1.3.6.1.4.1.2785.2.3.6.3.2.2.1.10
The counter associated with the number of Coding Violations encountered by a SONET/SDH FarEndVT in the current 15 minute interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndVTDayIntervalUASs 1.3.6.1.4.1.2785.2.3.6.3.2.2.1.11
The counter associated with the number of Unavailable Seconds encountered by a FarEndVT in the current 15 minute interval.
OBJECT-TYPE    
  PerfIntervalCount  

acSonetFarEndVTThresholdTable 1.3.6.1.4.1.2785.2.3.6.3.2.3
The SONET/SDH FarEndVT Threshold Table.
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetFarEndVTThresholdEntry

acSonetFarEndVTThresholdEntry 1.3.6.1.4.1.2785.2.3.6.3.2.3.1
An entry in the SONET/SDH FarEndVT Threshold Table.
OBJECT-TYPE    
  AcSonetFarEndVTThresholdEntry  

acSonetFarEndVTThresholdNodeId 1.3.6.1.4.1.2785.2.3.6.3.2.3.1.1
The node id is the id for this specific node in the OSAP ring.
OBJECT-TYPE    
  AcNodeId  

acSonetFarEndVTThresholdSlot 1.3.6.1.4.1.2785.2.3.6.3.2.3.1.2
The physical slot number of the port.
OBJECT-TYPE    
  AcSlotNumber  

acSonetFarEndVTThresholdPort 1.3.6.1.4.1.2785.2.3.6.3.2.3.1.3
The physical port number of the port.
OBJECT-TYPE    
  AcPortNumber  

acSonetFarEndVTThresholdVT 1.3.6.1.4.1.2785.2.3.6.3.2.3.1.4
The VT for which the set of statistics is available.
OBJECT-TYPE    
  INTEGER  

acSonetFarEndVTThresholdSelectionNum 1.3.6.1.4.1.2785.2.3.6.3.2.3.1.5
A number that selects either the 15 thresholds or the day thresholds.
OBJECT-TYPE    
  INTEGER minute(1), day(2)  

acSonetFarEndVTThresholdAdminStatus 1.3.6.1.4.1.2785.2.3.6.3.2.3.1.6
This field is used by the administrator to ensure only one client is performing management operations on this serial port at a time. When the field is read as available(0), the client can write the value locked(1) into this field to prevent a second client from performing managment ops on this instance.
OBJECT-TYPE    
  AcAdminStatus  

acSonetFarEndVTThresholdESs 1.3.6.1.4.1.2785.2.3.6.3.2.3.1.7
The threshold associated with Errored Seconds.
OBJECT-TYPE    
  INTEGER  

acSonetFarEndVTThresholdSESs 1.3.6.1.4.1.2785.2.3.6.3.2.3.1.8
The threshold associated with Severely Errored Seconds.
OBJECT-TYPE    
  INTEGER  

acSonetFarEndVTThresholdCVs 1.3.6.1.4.1.2785.2.3.6.3.2.3.1.9
The threshold associated with Coding Violations.
OBJECT-TYPE    
  INTEGER  

acSonetFarEndVTThresholdUASs 1.3.6.1.4.1.2785.2.3.6.3.2.3.1.10
The threshold associated with Unavailable Secondss.
OBJECT-TYPE    
  INTEGER  

Defined Objects

AcTraceString  
A string of up to printable characters, followed by padding NULL characters, and terminated with and characters, for a total of 64 characters. The maximum number of printable characters is 62 and if it's less, it's padded with NULL. Therefore the number of padding NULL characters is 0 to 62.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(64)  

AcSonetPortEntry  
SEQUENCE    
  AcNodeId as acSonetPortNodeId  
  AcSlotNumber as acSonetPortSlot  
  AcPortNumber as acSonetPortPort  
  AcAdminStatus as acSonetPortAdminStatus  
  AcOpStatus as acSonetPortOpStatus  
  INTEGER as acSonetPortOpCode  
  INTEGER as acSonetPortMediumType  
  Integer32 as acSonetPortTimeElapsed  
  Integer32 as acSonetPortValidIntervals  
  INTEGER as acSonetPortMediumLineCoding  
  INTEGER as acSonetPortMediumLineType  
  TruthValue as acSonetPortTransmitterEnable  
  DisplayString as acSonetPortCircuitIdentifier  
  Integer32 as acSonetPortInvalidIntervals  
  INTEGER as acSonetPortLoopbackConfig  
  TruthValue as acSonetPortResetCurrentPMregs  
  TruthValue as acSonetPortResetAllPMregs  
  INTEGER as acSonetPortConnectionType  
  INTEGER as acSonetPortRingIdentifier  
  DisplayString as acSonetPortRingName  

AcSonetThresholdEntry  
SEQUENCE    
  AcNodeId as acSonetThresholdNodeId  
  AcSlotNumber as acSonetThresholdSlot  
  AcPortNumber as acSonetThresholdPort  
  INTEGER as acSonetThresholdSESSet  

AcSonetDCCEntry  
SEQUENCE    
  AcNodeId as acSonetDCCNodeId  
  AcSlotNumber as acSonetDCCSlot  
  AcPortNumber as acSonetDCCPort  
  TruthValue as acSonetDCCSectionEnable  
  TruthValue as acSonetDCCLineEnable  
  TruthValue as acSonetDCCAppianEnable  
  TruthValue as acSonetDCCSectionFail  
  TruthValue as acSonetDCCLineFail  
  TruthValue as acSonetDCCAppianFail  

AcSonetSection15MinuteIntervalEntry  
SEQUENCE    
  AcNodeId as acSonetSection15MinuteIntervalNodeId  
  AcSlotNumber as acSonetSection15MinuteIntervalSlot  
  AcPortNumber as acSonetSection15MinuteIntervalPort  
  INTEGER as acSonetSection15MinuteIntervalNumber  
  TruthValue as acSonetSection15MinuteIntervalValidStats  
  TruthValue as acSonetSection15MinuteIntervalResetStats  
  Integer32 as acSonetSection15MinuteIntervalStatus  
  PerfIntervalCount as acSonetSection15MinuteIntervalESs  
  PerfIntervalCount as acSonetSection15MinuteIntervalSESs  
  PerfIntervalCount as acSonetSection15MinuteIntervalSEFSs  
  PerfIntervalCount as acSonetSection15MinuteIntervalCVs  

AcSonetSectionDayIntervalEntry  
SEQUENCE    
  AcNodeId as acSonetSectionDayIntervalNodeId  
  AcSlotNumber as acSonetSectionDayIntervalSlot  
  AcPortNumber as acSonetSectionDayIntervalPort  
  INTEGER as acSonetSectionDayIntervalNumber  
  TruthValue as acSonetSectionDayIntervalValidStats  
  TruthValue as acSonetSectionDayIntervalResetStats  
  Integer32 as acSonetSectionDayIntervalStatus  
  PerfIntervalCount as acSonetSectionDayIntervalESs  
  PerfIntervalCount as acSonetSectionDayIntervalSESs  
  PerfIntervalCount as acSonetSectionDayIntervalSEFSs  
  PerfIntervalCount as acSonetSectionDayIntervalCVs  

AcSonetSectionThresholdEntry  
SEQUENCE    
  AcNodeId as acSonetSectionThresholdNodeId  
  AcSlotNumber as acSonetSectionThresholdSlot  
  AcPortNumber as acSonetSectionThresholdPort  
  INTEGER as acSonetSectionThresholdSelectionNum  
  AcAdminStatus as acSonetSectionThresholdAdminStatus  
  INTEGER as acSonetSectionThresholdESs  
  INTEGER as acSonetSectionThresholdSESs  
  INTEGER as acSonetSectionThresholdSEFSs  
  INTEGER as acSonetSectionThresholdCVs  

AcSonetSectionTIMEntry  
SEQUENCE    
  AcNodeId as acSonetSectionTIMNodeId  
  AcSlotNumber as acSonetSectionTIMSlot  
  AcPortNumber as acSonetSectionTIMPort  
  TruthValue as acSonetSectionTIMGenerateEnable  
  TruthValue as acSonetSectionTIMDetectEnable  
  AcTraceString as acSonetSectionTIMTransmitedString  
  AcTraceString as acSonetSectionTIMExpectedString  
  AcTraceString as acSonetSectionTIMReceivedString  
  TruthValue as acSonetSectionTIMFailure  
  INTEGER as acSonetSectionTIMFormat  
  TruthValue as acSonetSectionTIMMismatchZeros  

AcSonetSectionSSMEntry  
SEQUENCE    
  AcNodeId as acSonetSectionSSMNodeId  
  AcSlotNumber as acSonetSectionSSMSlot  
  AcPortNumber as acSonetSectionSSMPort  
  TruthValue as acSonetSectionSSMDetectEnable  
  INTEGER as acSonetSectionSSMTransmitedValue  
  INTEGER as acSonetSectionSSMReceivedValue  

AcSonetLine15MinuteIntervalEntry  
SEQUENCE    
  AcNodeId as acSonetLine15MinuteIntervalNodeId  
  AcSlotNumber as acSonetLine15MinuteIntervalSlot  
  AcPortNumber as acSonetLine15MinuteIntervalPort  
  INTEGER as acSonetLine15MinuteIntervalNumber  
  TruthValue as acSonetLine15MinuteIntervalValidStats  
  TruthValue as acSonetLine15MinuteIntervalResetStats  
  Integer32 as acSonetLine15MinuteIntervalStatus  
  PerfIntervalCount as acSonetLine15MinuteIntervalESs  
  PerfIntervalCount as acSonetLine15MinuteIntervalSESs  
  PerfIntervalCount as acSonetLine15MinuteIntervalCVs  
  PerfIntervalCount as acSonetLine15MinuteIntervalUASs  
  PerfIntervalCount as acSonetLine15MinuteIntervalBER  

AcSonetLineDayIntervalEntry  
SEQUENCE    
  AcNodeId as acSonetLineDayIntervalNodeId  
  AcSlotNumber as acSonetLineDayIntervalSlot  
  AcPortNumber as acSonetLineDayIntervalPort  
  INTEGER as acSonetLineDayIntervalNumber  
  TruthValue as acSonetLineDayIntervalValidStats  
  TruthValue as acSonetLineDayIntervalResetStats  
  Integer32 as acSonetLineDayIntervalStatus  
  PerfIntervalCount as acSonetLineDayIntervalESs  
  PerfIntervalCount as acSonetLineDayIntervalSESs  
  PerfIntervalCount as acSonetLineDayIntervalCVs  
  PerfIntervalCount as acSonetLineDayIntervalUASs  
  PerfIntervalCount as acSonetLineDayIntervalBER  

AcSonetLineThresholdEntry  
SEQUENCE    
  AcNodeId as acSonetLineThresholdNodeId  
  AcSlotNumber as acSonetLineThresholdSlot  
  AcPortNumber as acSonetLineThresholdPort  
  INTEGER as acSonetLineThresholdSelectionNum  
  AcAdminStatus as acSonetLineThresholdAdminStatus  
  INTEGER as acSonetLineThresholdESs  
  INTEGER as acSonetLineThresholdSESs  
  INTEGER as acSonetLineThresholdCVs  
  INTEGER as acSonetLineThresholdUASs  

AcSonetFarEndLine15MinuteIntervalEntry  
SEQUENCE    
  AcNodeId as acSonetFarEndLine15MinuteIntervalNodeId  
  AcSlotNumber as acSonetFarEndLine15MinuteIntervalSlot  
  AcPortNumber as acSonetFarEndLine15MinuteIntervalPort  
  INTEGER as acSonetFarEndLine15MinuteIntervalNumber  
  TruthValue as acSonetFarEndLine15MinuteIntervalValidStats  
  TruthValue as acSonetFarEndLine15MinuteIntervalResetStats  
  PerfIntervalCount as acSonetFarEndLine15MinuteIntervalESs  
  PerfIntervalCount as acSonetFarEndLine15MinuteIntervalSESs  
  PerfIntervalCount as acSonetFarEndLine15MinuteIntervalCVs  
  PerfIntervalCount as acSonetFarEndLine15MinuteIntervalUASs  

AcSonetFarEndLineDayIntervalEntry  
SEQUENCE    
  AcNodeId as acSonetFarEndLineDayIntervalNodeId  
  AcSlotNumber as acSonetFarEndLineDayIntervalSlot  
  AcPortNumber as acSonetFarEndLineDayIntervalPort  
  INTEGER as acSonetFarEndLineDayIntervalNumber  
  TruthValue as acSonetFarEndLineDayIntervalValidStats  
  TruthValue as acSonetFarEndLineDayIntervalResetStats  
  PerfIntervalCount as acSonetFarEndLineDayIntervalESs  
  PerfIntervalCount as acSonetFarEndLineDayIntervalSESs  
  PerfIntervalCount as acSonetFarEndLineDayIntervalCVs  
  PerfIntervalCount as acSonetFarEndLineDayIntervalUASs  

AcSonetFarEndLineThresholdEntry  
SEQUENCE    
  AcNodeId as acSonetFarEndLineThresholdNodeId  
  AcSlotNumber as acSonetFarEndLineThresholdSlot  
  AcPortNumber as acSonetFarEndLineThresholdPort  
  INTEGER as acSonetFarEndLineThresholdSelectionNum  
  AcAdminStatus as acSonetFarEndLineThresholdAdminStatus  
  INTEGER as acSonetFarEndLineThresholdESs  
  INTEGER as acSonetFarEndLineThresholdSESs  
  INTEGER as acSonetFarEndLineThresholdCVs  
  INTEGER as acSonetFarEndLineThresholdUASs  

AcSonetPath15MinuteIntervalEntry  
SEQUENCE    
  AcNodeId as acSonetPath15MinuteIntervalNodeId  
  AcSlotNumber as acSonetPath15MinuteIntervalSlot  
  AcPortNumber as acSonetPath15MinuteIntervalPort  
  INTEGER as acSonetPath15MinuteIntervalPath  
  INTEGER as acSonetPath15MinuteIntervalNumber  
  Integer32 as acSonetPath15MinuteIntervalStatus  
  TruthValue as acSonetPath15MinuteIntervalValidStats  
  TruthValue as acSonetPath15MinuteIntervalResetStats  
  PerfIntervalCount as acSonetPath15MinuteIntervalESs  
  PerfIntervalCount as acSonetPath15MinuteIntervalSESs  
  PerfIntervalCount as acSonetPath15MinuteIntervalCVs  
  PerfIntervalCount as acSonetPath15MinuteIntervalUASs  
  PerfIntervalCount as acSonetPath15MinuteIntervalBER  

AcSonetPathDayIntervalEntry  
SEQUENCE    
  AcNodeId as acSonetPathDayIntervalNodeId  
  AcSlotNumber as acSonetPathDayIntervalSlot  
  AcPortNumber as acSonetPathDayIntervalPort  
  INTEGER as acSonetPathDayIntervalPath  
  INTEGER as acSonetPathDayIntervalNumber  
  Integer32 as acSonetPathDayIntervalStatus  
  TruthValue as acSonetPathDayIntervalValidStats  
  TruthValue as acSonetPathDayIntervalResetStats  
  PerfIntervalCount as acSonetPathDayIntervalESs  
  PerfIntervalCount as acSonetPathDayIntervalSESs  
  PerfIntervalCount as acSonetPathDayIntervalCVs  
  PerfIntervalCount as acSonetPathDayIntervalUASs  
  PerfIntervalCount as acSonetPathDayIntervalBER  

AcSonetPathThresholdEntry  
SEQUENCE    
  AcNodeId as acSonetPathThresholdNodeId  
  AcSlotNumber as acSonetPathThresholdSlot  
  AcPortNumber as acSonetPathThresholdPort  
  INTEGER as acSonetPathThresholdPath  
  INTEGER as acSonetPathThresholdSelectionNum  
  AcAdminStatus as acSonetPathThresholdAdminStatus  
  INTEGER as acSonetPathThresholdESs  
  INTEGER as acSonetPathThresholdSESs  
  INTEGER as acSonetPathThresholdCVs  
  INTEGER as acSonetPathThresholdUASs  

AcSonetPathRDIEntry  
SEQUENCE    
  AcNodeId as acSonetPathRDINodeId  
  AcSlotNumber as acSonetPathRDISlot  
  AcPortNumber as acSonetPathRDIPort  
  INTEGER as acSonetPathRDIPath  
  INTEGER as acSonetPathRDIOpMode  

AcSonetPathTIMEntry  
SEQUENCE    
  AcNodeId as acSonetPathTIMNodeId  
  AcSlotNumber as acSonetPathTIMSlot  
  AcPortNumber as acSonetPathTIMPort  
  INTEGER as acSonetPathTIMPath  
  TruthValue as acSonetPathTIMGenerateEnable  
  TruthValue as acSonetPathTIMDetectEnable  
  AcTraceString as acSonetPathTIMTransmitedString  
  AcTraceString as acSonetPathTIMExpectedString  
  AcTraceString as acSonetPathTIMReceivedString  
  TruthValue as acSonetPathTIMFailure  
  INTEGER as acSonetPathTIMFormat  
  TruthValue as acSonetPathTIMMismatchZeros  

AcSonetPathPLMEntry  
SEQUENCE    
  AcNodeId as acSonetPathPLMNodeId  
  AcSlotNumber as acSonetPathPLMSlot  
  AcPortNumber as acSonetPathPLMPort  
  INTEGER as acSonetPathPLMPath  
  TruthValue as acSonetPathPLMDetectEnable  
  INTEGER as acSonetPathPLMTransmitedValue  
  INTEGER as acSonetPathPLMExpectedValue  
  INTEGER as acSonetPathPLMReceivedValue  
  TruthValue as acSonetPathPLMMismatchFailure  
  TruthValue as acSonetPathPLMUnequipped  

AcSonetFarEndPath15MinuteIntervalEntry  
SEQUENCE    
  AcNodeId as acSonetFarEndPath15MinuteIntervalNodeId  
  AcSlotNumber as acSonetFarEndPath15MinuteIntervalSlot  
  AcPortNumber as acSonetFarEndPath15MinuteIntervalPort  
  INTEGER as acSonetFarEndPath15MinuteIntervalPath  
  INTEGER as acSonetFarEndPath15MinuteIntervalNumber  
  TruthValue as acSonetFarEndPath15MinuteIntervalValidStats  
  TruthValue as acSonetFarEndPath15MinuteIntervalResetStats  
  PerfIntervalCount as acSonetFarEndPath15MinuteIntervalESs  
  PerfIntervalCount as acSonetFarEndPath15MinuteIntervalSESs  
  PerfIntervalCount as acSonetFarEndPath15MinuteIntervalCVs  
  PerfIntervalCount as acSonetFarEndPath15MinuteIntervalUASs  

AcSonetFarEndPathDayIntervalEntry  
SEQUENCE    
  AcNodeId as acSonetFarEndPathDayIntervalNodeId  
  AcSlotNumber as acSonetFarEndPathDayIntervalSlot  
  AcPortNumber as acSonetFarEndPathDayIntervalPort  
  INTEGER as acSonetFarEndPathDayIntervalPath  
  INTEGER as acSonetFarEndPathDayIntervalNumber  
  TruthValue as acSonetFarEndPathDayIntervalValidStats  
  TruthValue as acSonetFarEndPathDayIntervalResetStats  
  PerfIntervalCount as acSonetFarEndPathDayIntervalESs  
  PerfIntervalCount as acSonetFarEndPathDayIntervalSESs  
  PerfIntervalCount as acSonetFarEndPathDayIntervalCVs  
  PerfIntervalCount as acSonetFarEndPathDayIntervalUASs  

AcSonetFarEndPathThresholdEntry  
SEQUENCE    
  AcNodeId as acSonetFarEndPathThresholdNodeId  
  AcSlotNumber as acSonetFarEndPathThresholdSlot  
  AcPortNumber as acSonetFarEndPathThresholdPort  
  INTEGER as acSonetFarEndPathThresholdPath  
  INTEGER as acSonetFarEndPathThresholdSelectionNum  
  AcAdminStatus as acSonetFarEndPathThresholdAdminStatus  
  INTEGER as acSonetFarEndPathThresholdESs  
  INTEGER as acSonetFarEndPathThresholdSESs  
  INTEGER as acSonetFarEndPathThresholdCVs  
  INTEGER as acSonetFarEndPathThresholdUASs  

AcSonetVT15MinuteIntervalEntry  
SEQUENCE    
  AcNodeId as acSonetVT15MinuteIntervalNodeId  
  AcSlotNumber as acSonetVT15MinuteIntervalSlot  
  AcPortNumber as acSonetVT15MinuteIntervalPort  
  INTEGER as acSonetVT15MinuteIntervalVT  
  INTEGER as acSonetVT15MinuteIntervalNumber  
  Integer32 as acSonetVT15MinuteIntervalStatus  
  TruthValue as acSonetVT15MinuteIntervalValidStats  
  TruthValue as acSonetVT15MinuteIntervalResetStats  
  PerfIntervalCount as acSonetVT15MinuteIntervalESs  
  PerfIntervalCount as acSonetVT15MinuteIntervalSESs  
  PerfIntervalCount as acSonetVT15MinuteIntervalCVs  
  PerfIntervalCount as acSonetVT15MinuteIntervalUASs  
  PerfIntervalCount as acSonetVT15MinuteIntervalBER  

AcSonetVTDayIntervalEntry  
SEQUENCE    
  AcNodeId as acSonetVTDayIntervalNodeId  
  AcSlotNumber as acSonetVTDayIntervalSlot  
  AcPortNumber as acSonetVTDayIntervalPort  
  INTEGER as acSonetVTDayIntervalVT  
  INTEGER as acSonetVTDayIntervalNumber  
  Integer32 as acSonetVTDayIntervalStatus  
  TruthValue as acSonetVTDayIntervalValidStats  
  TruthValue as acSonetVTDayIntervalResetStats  
  PerfIntervalCount as acSonetVTDayIntervalESs  
  PerfIntervalCount as acSonetVTDayIntervalSESs  
  PerfIntervalCount as acSonetVTDayIntervalCVs  
  PerfIntervalCount as acSonetVTDayIntervalUASs  
  PerfIntervalCount as acSonetVTDayIntervalBER  

AcSonetVTThresholdEntry  
SEQUENCE    
  AcNodeId as acSonetVTThresholdNodeId  
  AcSlotNumber as acSonetVTThresholdSlot  
  AcPortNumber as acSonetVTThresholdPort  
  INTEGER as acSonetVTThresholdVT  
  INTEGER as acSonetVTThresholdSelectionNum  
  AcAdminStatus as acSonetVTThresholdAdminStatus  
  INTEGER as acSonetVTThresholdESs  
  INTEGER as acSonetVTThresholdSESs  
  INTEGER as acSonetVTThresholdCVs  
  INTEGER as acSonetVTThresholdUASs  

AcSonetVTRDIEntry  
SEQUENCE    
  AcNodeId as acSonetVTRDINodeId  
  AcSlotNumber as acSonetVTRDISlot  
  AcPortNumber as acSonetVTRDIPort  
  INTEGER as acSonetVTRDIVT  
  INTEGER as acSonetVTRDIOpMode  

AcSonetVTPLMEntry  
SEQUENCE    
  AcNodeId as acSonetVTPLMNodeId  
  AcSlotNumber as acSonetVTPLMSlot  
  AcPortNumber as acSonetVTPLMPort  
  INTEGER as acSonetVTPLMVT  
  TruthValue as acSonetVTPLMDetectEnable  
  INTEGER as acSonetVTPLMTransmitedValue  
  INTEGER as acSonetVTPLMExpectedValue  
  INTEGER as acSonetVTPLMReceivedValue  
  TruthValue as acSonetVTPLMMismatchFailure  
  TruthValue as acSonetVTPLMUnequipped  

AcSonetFarEndVT15MinuteIntervalEntry  
SEQUENCE    
  AcNodeId as acSonetFarEndVT15MinuteIntervalNodeId  
  AcSlotNumber as acSonetFarEndVT15MinuteIntervalSlot  
  AcPortNumber as acSonetFarEndVT15MinuteIntervalPort  
  INTEGER as acSonetFarEndVT15MinuteIntervalVT  
  INTEGER as acSonetFarEndVT15MinuteIntervalNumber  
  TruthValue as acSonetFarEndVT15MinuteIntervalValidStats  
  TruthValue as acSonetFarEndVT15MinuteIntervalResetStats  
  PerfIntervalCount as acSonetFarEndVT15MinuteIntervalESs  
  PerfIntervalCount as acSonetFarEndVT15MinuteIntervalSESs  
  PerfIntervalCount as acSonetFarEndVT15MinuteIntervalCVs  
  PerfIntervalCount as acSonetFarEndVT15MinuteIntervalUASs  

AcSonetFarEndVTDayIntervalEntry  
SEQUENCE    
  AcNodeId as acSonetFarEndVTDayIntervalNodeId  
  AcSlotNumber as acSonetFarEndVTDayIntervalSlot  
  AcPortNumber as acSonetFarEndVTDayIntervalPort  
  INTEGER as acSonetFarEndVTDayIntervalVT  
  INTEGER as acSonetFarEndVTDayIntervalNumber  
  TruthValue as acSonetFarEndVTDayIntervalValidStats  
  TruthValue as acSonetFarEndVTDayIntervalResetStats  
  PerfIntervalCount as acSonetFarEndVTDayIntervalESs  
  PerfIntervalCount as acSonetFarEndVTDayIntervalSESs  
  PerfIntervalCount as acSonetFarEndVTDayIntervalCVs  
  PerfIntervalCount as acSonetFarEndVTDayIntervalUASs  

AcSonetFarEndVTThresholdEntry  
SEQUENCE    
  AcNodeId as acSonetFarEndVTThresholdNodeId  
  AcSlotNumber as acSonetFarEndVTThresholdSlot  
  AcPortNumber as acSonetFarEndVTThresholdPort  
  INTEGER as acSonetFarEndVTThresholdVT  
  INTEGER as acSonetFarEndVTThresholdSelectionNum  
  AcAdminStatus as acSonetFarEndVTThresholdAdminStatus  
  INTEGER as acSonetFarEndVTThresholdESs  
  INTEGER as acSonetFarEndVTThresholdSESs  
  INTEGER as acSonetFarEndVTThresholdCVs  
  INTEGER as acSonetFarEndVTThresholdUASs  

AcSonetPortProtectionEntry  
SEQUENCE    
  AcNodeId as acSonetPortProtectionNodeId  
  AcSlotNumber as acSonetPortProtectionSlot  
  AcPortNumber as acSonetPortProtectionPort  
  INTEGER as acSonetPortProtectionType  

AcSonetLineProtectionEntry  
SEQUENCE    
  AcNodeId as acSonetLineProtectionNodeId  
  AcSlotNumber as acSonetLineProtectionSlot  
  AcPortNumber as acSonetLineProtectionPort  
  INTEGER as acSonetLineProtectionArchitecture  
  INTEGER as acSonetLineProtectionOpMode  
  INTEGER as acSonetLineProtectionSwitchType  
  Integer32 as acSonetLineProtectionSFThreshold  
  Integer32 as acSonetLineProtectionSDThreshold  
  TruthValue as acSonetLineProtectionActiveTraffic  
  TruthValue as acSonetLineProtectionProtectionSwitch  
  TruthValue as acSonetLineProtectionFail  
  TruthValue as acSonetLineProtectionChannelMismatchFail  
  TruthValue as acSonetLineProtectionModeMismatchFail  
  TruthValue as acSonetLineProtectionFarEndLineFail  
  Integer32 as acSonetLineProtectionWTRTime  
  INTEGER as acSonetLineProtectionManCommand  

AcSonetPathProtectionEntry  
SEQUENCE    
  AcNodeId as acSonetPathProtectionNodeId  
  AcSlotNumber as acSonetPathProtectionSlot  
  AcPortNumber as acSonetPathProtectionPort  
  INTEGER as acSonetPathProtectionPath  
  INTEGER as acSonetPathProtectionSwitchType  
  Integer32 as acSonetPathProtectionSFThreshold  
  Integer32 as acSonetPathProtectionSDThreshold  
  TruthValue as acSonetPathProtectionActiveTraffic  
  TruthValue as acSonetPathProtectionProtectionSwitch  
  Integer32 as acSonetPathProtectionWTRTime  
  Integer32 as acSonetPathProtectionWTITime  
  Integer32 as acSonetPathProtectionWTCTime  
  Integer32 as acSonetPathProtectionWTRelTime  
  INTEGER as acSonetPathProtectionManSwitch  
  INTEGER as acSonetPathProtectionSwitchOpStatus  
  INTEGER as acSonetPathProtectionProtectionMode  

AcSonetVTProtectionEntry  
SEQUENCE    
  AcNodeId as acSonetVTProtectionNodeId  
  AcSlotNumber as acSonetVTProtectionSlot  
  AcPortNumber as acSonetVTProtectionPort  
  INTEGER as acSonetVTProtectionVT  
  INTEGER as acSonetVTProtectionSwitchType  
  Integer32 as acSonetVTProtectionSFThreshold  
  Integer32 as acSonetVTProtectionSDThreshold  
  TruthValue as acSonetVTProtectionProtectionSwitch  
  Integer32 as acSonetVTProtectionWTRTime  
  INTEGER as acSonetVTProtectionManSwitch  
  TruthValue as acSonetVTProtectionActiveTraffic