APSECURITY-MIB

File: APSECURITY-MIB.mib (7118 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
ACMEPACKET-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 IpAddress Unsigned32
OBJECT-GROUP NOTIFICATION-GROUP DisplayString
TruthValue acmepacketMgmt

Defined Objects

apSecurityModule 1.3.6.1.4.1.9148.3.9
The Net-Net SECURITY MIB for Acme Packet
MODULE-IDENTITY    

apSecurityMIBObjects 1.3.6.1.4.1.9148.3.9.1
OBJECT IDENTIFIER    

apSecurityNotificationObjects 1.3.6.1.4.1.9148.3.9.2
OBJECT IDENTIFIER    

apSecuritySpi 1.3.6.1.4.1.9148.3.9.2.1
Tunnel security-policy-index.
OBJECT-TYPE    
  Unsigned32  

apSecuritySrcIpAddress 1.3.6.1.4.1.9148.3.9.2.2
Source IP address.
OBJECT-TYPE    
  IpAddress  

apSecurityDstIpAddress 1.3.6.1.4.1.9148.3.9.2.3
Destination IP address.
OBJECT-TYPE    
  IpAddress  

apSecurityIPSECMode 1.3.6.1.4.1.9148.3.9.2.4
IPSec mode.
OBJECT-TYPE    
  INTEGER tunnel(0), transport(1)  

apSecurityEncryptionAlg 1.3.6.1.4.1.9148.3.9.2.5
Type of the encryption algorithms supported in the tunnel setup.
OBJECT-TYPE    
  INTEGER any(0), alg-des(1), alg-3des(2), alg-blowfish(3), alg-aes(4), null(5)  

apSecurityAuthAlg 1.3.6.1.4.1.9148.3.9.2.6
Type of the authentication algorithms supported in the tunnel setup.
OBJECT-TYPE    
  INTEGER any(0), md5(1), sha1(2)  

apSecuritySecProtocol 1.3.6.1.4.1.9148.3.9.2.7
Type of the security protocol supported in the tunnel setup.
OBJECT-TYPE    
  INTEGER ah(0), esp(1), esp-auth(2), esp-null(3)  

apSecurityFailureCause 1.3.6.1.4.1.9148.3.9.2.8
Reason for failure in the IKE, IPSec or RADIUS areas.
OBJECT-TYPE    
  INTEGER incorrect-id(0), incorrect-user-passwd(1), incorrect-shared-secret(2), incorrect-dh-group(3), incorrect-encryption-alg(4), incorrect-auth-alg(5), incorrect-sec-protocol(6), incorrect-hash(7), incorrect-mode(8), service-unavailable(9), access-reject(10)  

apSecurityFailureArea 1.3.6.1.4.1.9148.3.9.2.9
Where the failure happened.
OBJECT-TYPE    
  INTEGER ike(0), ipsec(1), radius(2)  

apSecurityStatus 1.3.6.1.4.1.9148.3.9.2.10
Status.
OBJECT-TYPE    
  INTEGER success(1), failure(2)  

apSecurityDateTime 1.3.6.1.4.1.9148.3.9.2.11
Time as configured at the Net-Net SBC when an event completes.
OBJECT-TYPE    
  DisplayString  

apSecurityUser 1.3.6.1.4.1.9148.3.9.2.12
User name
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

apSecurityNotifications 1.3.6.1.4.1.9148.3.9.3
OBJECT IDENTIFIER    

apSecurityAuthNotificationsPrefix 1.3.6.1.4.1.9148.3.9.3.1
OBJECT IDENTIFIER    

apSecurityAuthNotifications 1.3.6.1.4.1.9148.3.9.3.1.0
OBJECT IDENTIFIER    

apSecurityTunnelFailureNotification 1.3.6.1.4.1.9148.3.9.3.1.0.1
The notification will be generated whenever IPSEC IKEV2 tunnel fails to establish.
NOTIFICATION-TYPE    
  apSecuritySpi  
  apSecuritySrcIpAddress  
  apSecurityDstIpAddress  
  apSecurityFailureCause  
  apSecurityFailureArea  
  apSecurityStatus  

apSecurityRadiusFailureNotification 1.3.6.1.4.1.9148.3.9.3.1.0.2
The notification will be generated whenever Radius authentication request fails.
NOTIFICATION-TYPE    
  apSecurityUser  
  apSecurityFailureCause  
  apSecurityFailureArea  
  apSecurityStatus  

apSecurityGeneralNotificationsPrefix 1.3.6.1.4.1.9148.3.9.3.2
OBJECT IDENTIFIER    

apSecurityGeneralNotifications 1.3.6.1.4.1.9148.3.9.3.2.0
OBJECT IDENTIFIER    

apSecurityTunnelDPDNotification 1.3.6.1.4.1.9148.3.9.3.2.0.1
The notification will be generated whenever IPSEC IKEV2 tunnel fails due to Dead Peer Detection(DPD).
NOTIFICATION-TYPE    
  apSecuritySpi  
  apSecuritySrcIpAddress  
  apSecurityDstIpAddress  
  apSecurityFailureArea  
  apSecurityStatus  

apSecurityConformance 1.3.6.1.4.1.9148.3.9.4
OBJECT IDENTIFIER    

apSecurityCompliances 1.3.6.1.4.1.9148.3.9.4.1
OBJECT IDENTIFIER    

apSecurityGroups 1.3.6.1.4.1.9148.3.9.4.2
OBJECT IDENTIFIER    

apSecurityNotificationsGroups 1.3.6.1.4.1.9148.3.9.4.3
OBJECT IDENTIFIER    

apSecurityNotificationsGroup 1.3.6.1.4.1.9148.3.9.4.3.1
A collection of notifications for security
NOTIFICATION-GROUP