ARMILLAIRE2000-MIB

File: ARMILLAIRE2000-MIB.mib (242874 bytes)

Imported modules

RFC-1215 RFC1155-SMI RFC-1212
RFC1213-MIB

Imported symbols

TRAP-TYPE enterprises Counter
Gauge IpAddress TimeTicks
OBJECT-TYPE DisplayString

Defined Objects

armillaire 1.3.6.1.4.1.4618
OBJECT IDENTIFIER    

products 1.3.6.1.4.1.4618.1
OBJECT IDENTIFIER    

armillaire2000 1.3.6.1.4.1.4618.1.2
OBJECT IDENTIFIER    

switchInfo 1.3.6.1.4.1.4618.1.2.1
OBJECT IDENTIFIER    

switchGenInfoGrp 1.3.6.1.4.1.4618.1.2.1.1
OBJECT IDENTIFIER    

switchName 1.3.6.1.4.1.4618.1.2.1.1.1
The switch Name. Can be any combination of alphanumeric characters. Spaces are not allowed and cannot exceed 24 characters
OBJECT-TYPE    
  NameString  

switchDescr 1.3.6.1.4.1.4618.1.2.1.1.2
Description of the Switch. Can be any combination of alphanumeric characters. Spaces are allowed and cannot exceed 255 characters.
OBJECT-TYPE    
  DisplayString SIZE(1..255)  

switchLocation 1.3.6.1.4.1.4618.1.2.1.1.3
Location of the Switch. Can be any combination of alphanumeric characters. Spaces are allowed and cannot exceed 255 characters.
OBJECT-TYPE    
  DisplayString SIZE(1..255)  

switchContact 1.3.6.1.4.1.4618.1.2.1.1.4
Contact information about the Switch. Can be any combination of alphanumeric characters. Spaces are allowed and cannot exceed 24 characters.
OBJECT-TYPE    
  DisplayString SIZE(1..24)  

switchIPAddr 1.3.6.1.4.1.4618.1.2.1.1.5
Switch IP address. In xxx.xxx.xxx.xxx format.
OBJECT-TYPE    
  IpAddress  

switchUpTime 1.3.6.1.4.1.4618.1.2.1.1.6
The Time (in Seconds) since last restart of the Switch
OBJECT-TYPE    
  TimeTicks  

switchVersion 1.3.6.1.4.1.4618.1.2.1.1.7
The version of current Switch
OBJECT-TYPE    
  DisplayString SIZE(1..24)  

switchVerDescr 1.3.6.1.4.1.4618.1.2.1.1.8
The description of switch version
OBJECT-TYPE    
  DisplayString SIZE(1..255)  

systemDescr 1.3.6.1.4.1.4618.1.2.1.1.9
The description of the System
OBJECT-TYPE    
  DisplayString SIZE(1..255)  

switchType 1.3.6.1.4.1.4618.1.2.1.1.10
The Switch Type : (National/International)
OBJECT-TYPE    
  SwitchType  

switchNameStatus 1.3.6.1.4.1.4618.1.2.1.1.11
Current Status (configurational Status) of this Switch Name. To Configure this Link, the only option is 'CREATEANDWAIT' To Delete this Link, the only option is 'DESTROY' For the GET Operation, the possible options are 1) active 2) notinservice 3) no
OBJECT-TYPE    
  RowStatus  

switchPcInfo 1.3.6.1.4.1.4618.1.2.1.2
OBJECT IDENTIFIER    

switchPcInfoTable 1.3.6.1.4.1.4618.1.2.1.2.1
Switch Point code Information Table.The index of this table is switchPc (Integer).
OBJECT-TYPE    
  SEQUENCE OF  
    SwitchPcEntry

switchPcEntry 1.3.6.1.4.1.4618.1.2.1.2.1.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  SwitchPcEntry  

switchPc 1.3.6.1.4.1.4618.1.2.1.2.1.1.1
Point Code for the switch (the Integer Value). The Point Code should be converted into its Integer equivalent. For Example: 0-1-1 is converted as 257 (for ANSI) 0-1-2 is converted as 10 (for ITU)
OBJECT-TYPE    
  INTEGER 1..16777215  

switchPcMode 1.3.6.1.4.1.4618.1.2.1.2.1.1.2
Point Code type (ANSI/ITU)
OBJECT-TYPE    
  Standard  

switchPcStatus 1.3.6.1.4.1.4618.1.2.1.2.1.1.3
Current Status (configurational Status) of this Switch Point Code. To Configure this Link, the only option is 'CREATEANDWAIT' To Delete this Link, the only option is 'DESTROY' For the 'GET' Operation, the possible options are 1) active 2) notinservic
OBJECT-TYPE    
  RowStatus  

switchUsrInfo 1.3.6.1.4.1.4618.1.2.1.3
OBJECT IDENTIFIER    

switchUserCfgTable 1.3.6.1.4.1.4618.1.2.1.3.1
This Table is to maintain the User information and providing Validation Checks for Authorised users for Configuration.The index of this table is switchUserId (Integer). CURRENTLY NOT APPLICABLE
OBJECT-TYPE    
  SEQUENCE OF  
    SwitchUserCfgEntry

switchUserCfgEntry 1.3.6.1.4.1.4618.1.2.1.3.1.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level. CURRENTLY NOT APPLICABLE
OBJECT-TYPE    
  SwitchUserCfgEntry  

switchUserId 1.3.6.1.4.1.4618.1.2.1.3.1.1.1
The Id of the Switch User. The user can only 'SET' User Id. If user tries to 'GET' the user Id, incorrect value would be displayed. This Feature is CURRENTLY NOT APPLICABLE
OBJECT-TYPE    
  INTEGER  

switchUserName 1.3.6.1.4.1.4618.1.2.1.3.1.1.2
The NAME of the Switch User. The user can only 'SET' User NAME. If user tries to 'GET' the user Id, incorrect value would be displayed. This Feature is CURRENTLY NOT APPLICABLE
OBJECT-TYPE    
  NameString  

switchUserPassword 1.3.6.1.4.1.4618.1.2.1.3.1.1.3
The PASSWORD of the Switch User. This is in an encrypted format. This is not visible to user.The user can only set password . This Feature is CURRENTLY NOT APPLICABLE
OBJECT-TYPE    
  NameString  

switchUserPriority 1.3.6.1.4.1.4618.1.2.1.3.1.1.4
The PRIORITY of the Switch User. User Priority by default is ADMINISTRATOR. This Feature is CURRENTLY NOT APPLICABLE
OBJECT-TYPE    
  UserLoginPriority  

switchUserStatus 1.3.6.1.4.1.4618.1.2.1.3.1.1.5
Checks whether user is a valid user. Only the user with administrative privilege can login. This Feature is CURRENTLY NOT APPLICABLE
OBJECT-TYPE    
  UserLoginStatus  

switchVersionGrp 1.3.6.1.4.1.4618.1.2.1.4
OBJECT IDENTIFIER    

switchVerLM 1.3.6.1.4.1.4618.1.2.1.4.1
Switch's Process LM Version number
OBJECT-TYPE    
  DisplayString  

switchVerMTP2 1.3.6.1.4.1.4618.1.2.1.4.2
Switch's Process MPT2 Version number
OBJECT-TYPE    
  DisplayString  

switchVerICC 1.3.6.1.4.1.4618.1.2.1.4.3
Switch's Process ICC Version number
OBJECT-TYPE    
  DisplayString  

switchVerSIG 1.3.6.1.4.1.4618.1.2.1.4.4
Switch's Process SIG Version number
OBJECT-TYPE    
  DisplayString  

switchVerISDN 1.3.6.1.4.1.4618.1.2.1.4.5
Switch's Process ISDN Version number
OBJECT-TYPE    
  DisplayString  

switchVerSPHR 1.3.6.1.4.1.4618.1.2.1.4.6
Switch's Process SPHR Version number
OBJECT-TYPE    
  DisplayString  

switchConfig 1.3.6.1.4.1.4618.1.2.2
OBJECT IDENTIFIER    

ss7 1.3.6.1.4.1.4618.1.2.2.1
OBJECT IDENTIFIER    

ss7Sig 1.3.6.1.4.1.4618.1.2.2.1.1
OBJECT IDENTIFIER    

ss7LinkCfgTable 1.3.6.1.4.1.4618.1.2.2.1.1.1
SS7 Link Table. Information about the SS7 Link(s) in MSSC are provided in this table. The index of this table is ss7LinkName (String)
OBJECT-TYPE    
  SEQUENCE OF  
    Ss7LinkCfgEntry

ss7LinkCfgEntry 1.3.6.1.4.1.4618.1.2.2.1.1.1.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  Ss7LinkCfgEntry  

ss7LinkName 1.3.6.1.4.1.4618.1.2.2.1.1.1.1.1
Link name. Can be any combination of alphanumeric characters. Spaces are not allowed and cannot exceed 15 characters.
OBJECT-TYPE    
  NameString  

ss7LinkId 1.3.6.1.4.1.4618.1.2.2.1.1.1.1.2
User assigned Link id. Can be any integer 1-65535.
OBJECT-TYPE    
  INTEGER 1..65535  

ss7LinkTrunkId 1.3.6.1.4.1.4618.1.2.2.1.1.1.1.3
User assigned Trunk id.
OBJECT-TYPE    
  INTEGER 1..65535  

ss7LinkChannel 1.3.6.1.4.1.4618.1.2.2.1.1.1.1.4
User assigned channel.
OBJECT-TYPE    
  INTEGER 1..65535  

ss7LinkSlc 1.3.6.1.4.1.4618.1.2.2.1.1.1.1.5
Link Selection Code. Can be any integer 0-15.
OBJECT-TYPE    
  INTEGER 0..15  

ss7LinkSpeed 1.3.6.1.4.1.4618.1.2.2.1.1.1.1.6
SS7 Link Speed: Possible Values are: 56k or 64k. Default Value is 64K
OBJECT-TYPE    
  LinkType  

ss7LinkMode 1.3.6.1.4.1.4618.1.2.2.1.1.1.1.7
Link Mode(ANSI/ITU)
OBJECT-TYPE    
  Standard  

ss7LinkRowStatus 1.3.6.1.4.1.4618.1.2.2.1.1.1.1.8
Current Status (configurational Status) of this Link. To Configure this Link, the only option is 'CREATEANDWAIT' To Delete this Link, the only option is 'DESTROY' For the 'GET' Operation, the possible options are 1) active 2) notinservice 3) notread
OBJECT-TYPE    
  RowStatus  

ss7LinkOpStatus 1.3.6.1.4.1.4618.1.2.2.1.1.1.1.9
Current Status (Operational Status) of this SS7 Link. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down 3) inhibit
OBJECT-TYPE    
  LinkOpStatus  

ss7AtmLinkCfgTable 1.3.6.1.4.1.4618.1.2.2.1.1.2
SS7 Atm Link Table. Information about the Atm Link(s) in MSSC are provided in this table. This table has two indices. The indices are ss7AtmVpi and ss7AtmVci (both Integer).
OBJECT-TYPE    
  SEQUENCE OF  
    Ss7AtmLinkCfgEntry

ss7AtmLinkCfgEntry 1.3.6.1.4.1.4618.1.2.2.1.1.2.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  Ss7AtmLinkCfgEntry  

ss7AtmVpi 1.3.6.1.4.1.4618.1.2.2.1.1.2.1.1
Atmlink Virtual Path Identifier.
OBJECT-TYPE    
  INTEGER 1..65535  

ss7AtmVci 1.3.6.1.4.1.4618.1.2.2.1.1.2.1.2
Atmlink Virtual Channel Identifier.
OBJECT-TYPE    
  INTEGER 1..65535  

ss7AtmLnkId 1.3.6.1.4.1.4618.1.2.2.1.1.2.1.3
Atmlink Id.
OBJECT-TYPE    
  INTEGER 1..65535  

ss7AtmXconnectId 1.3.6.1.4.1.4618.1.2.2.1.1.2.1.4
Xconnect Id.
OBJECT-TYPE    
  INTEGER 1..65535  

ss7AtmSlotId 1.3.6.1.4.1.4618.1.2.2.1.1.2.1.5
Slot Id.
OBJECT-TYPE    
  INTEGER 1..65535  

ss7AtmPortId 1.3.6.1.4.1.4618.1.2.2.1.1.2.1.6
Port Id.
OBJECT-TYPE    
  INTEGER 1..65535  

ss7AtmChnlId 1.3.6.1.4.1.4618.1.2.2.1.1.2.1.7
Channel Id.
OBJECT-TYPE    
  INTEGER 1..65535  

ss7AtmTrnkId 1.3.6.1.4.1.4618.1.2.2.1.1.2.1.8
Atm Trunk Id.
OBJECT-TYPE    
  INTEGER 1..65535  

ss7AtmPhyType 1.3.6.1.4.1.4618.1.2.2.1.1.2.1.9
SS7 ATM Physical interface type. The value of this object could be 1) T1 (interface - t1) 2) E1 (interface - e1).
OBJECT-TYPE    
  AtmIfType  

ss7AtmLinkRowStatus 1.3.6.1.4.1.4618.1.2.2.1.1.2.1.10
Current ATM Status (configurational Status) of this Link. To Configure this Link, the only option is 'CREATEANDWAIT' To Delete this Link, the only option is 'DESTROY' For the 'GET' Operation, the possible options are 1) active 2) notinservice 3) not
OBJECT-TYPE    
  RowStatus  

ss7AtmLinkOpStatus 1.3.6.1.4.1.4618.1.2.2.1.1.2.1.11
Current Status (Operational Status) of this SS7 Atm Link. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down 3) inhibit
OBJECT-TYPE    
  LinkOpStatus  

ss7LinksetCfgTable 1.3.6.1.4.1.4618.1.2.2.1.1.3
SS7 Linkset Table. Information about the Linkset(s) in MSSC are provided in this table. This table has the index ss7LinksetLinkId (Integer).
OBJECT-TYPE    
  SEQUENCE OF  
    Ss7LinksetCfgEntry

ss7LinksetCfgEntry 1.3.6.1.4.1.4618.1.2.2.1.1.3.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  Ss7LinksetCfgEntry  

ss7LinksetLinkId 1.3.6.1.4.1.4618.1.2.2.1.1.3.1.1
Link id. Can be any integer 1-65535.
OBJECT-TYPE    
  INTEGER 1..65535  

ss7LinksetId 1.3.6.1.4.1.4618.1.2.2.1.1.3.1.2
Linkset id. Can be any integer 1-128.
OBJECT-TYPE    
  INTEGER 1..128  

ss7LinksetName 1.3.6.1.4.1.4618.1.2.2.1.1.3.1.3
Linkset name. Can be any combination of alphanumeric characters. Spaces are not allowed and cannot exceed 15 characters.
OBJECT-TYPE    
  NameString  

ss7LinksetAdjDpc 1.3.6.1.4.1.4618.1.2.2.1.1.3.1.4
Adjacent Point Code for this Linkset (the Integer value). The Point Code should be converted into its Integer equivalent. For Example: 0-1-1 is converted as 257 (for ANSI) 0-1-2 is converted as 10 (for ITU)
OBJECT-TYPE    
  INTEGER 1..16777215  

ss7LinksetMode 1.3.6.1.4.1.4618.1.2.2.1.1.3.1.5
Linkset Type(ANSI/ITU)
OBJECT-TYPE    
  Standard  

ss7LinksetRowStatus 1.3.6.1.4.1.4618.1.2.2.1.1.3.1.6
Current Status (configurational Status) of this Link. To Configure this Link, the only option is 'CREATEANDWAIT' To Delete this Link, the only option is 'DESTROY' For the 'GET' Operation, the possible options are 1) active 2) notinservice 3) notread
OBJECT-TYPE    
  RowStatus  

ss7LinksetOpStatus 1.3.6.1.4.1.4618.1.2.2.1.1.3.1.7
Current Status (Operational Status) of this Link Set. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) deactive
OBJECT-TYPE    
  LinkSetOpStatus  

ss7LinksetMgmtTable 1.3.6.1.4.1.4618.1.2.2.1.1.4
SS7 Linkset Management Table. The Management Commands for Linkset in MSSC are provided in this table. This table has the index linksetId (Integer).
OBJECT-TYPE    
  SEQUENCE OF  
    Ss7LinksetMgmtEntry

ss7LinksetMgmtEntry 1.3.6.1.4.1.4618.1.2.2.1.1.4.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  Ss7LinksetMgmtEntry  

linksetId 1.3.6.1.4.1.4618.1.2.2.1.1.4.1.1
SS7 Linkset Id
OBJECT-TYPE    
  INTEGER  

linksetLevel 1.3.6.1.4.1.4618.1.2.2.1.1.4.1.2
This option deactivates the linkset at level 1 or level 2. Level 2 is for layer 2 only. The option available are: 1) Level 1 (level-1) [Default] 2) Level 2 (level-2)
OBJECT-TYPE    
  Level  

linksetMgmntCmd 1.3.6.1.4.1.4618.1.2.2.1.1.4.1.3
Management Command for Activing/DeActiving call on this linkset. The possible options are : 1) Active 2) Deactive 3) Noaction [default]
OBJECT-TYPE    
  LinkSetControlStatus  

ss7LinkMgmntTable 1.3.6.1.4.1.4618.1.2.2.1.1.5
SS7 Link Management Table. The Management Commands for Link(s) in MSSC are provided in this table. This table has the index linkName (String).
OBJECT-TYPE    
  SEQUENCE OF  
    Ss7LinkMgmntEntry

ss7LinkMgmntEntry 1.3.6.1.4.1.4618.1.2.2.1.1.5.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  Ss7LinkMgmntEntry  

linkName 1.3.6.1.4.1.4618.1.2.2.1.1.5.1.1
SS7 Link Name
OBJECT-TYPE    
  NameString  

linkMgmntCmd 1.3.6.1.4.1.4618.1.2.2.1.1.5.1.2
Management Command for Inhibiting/UnInhibiting link. The possible options are : 1) Inhibit 2) UnInhibit 3) Noaction [default]
OBJECT-TYPE    
  LinkControlStatus  

ss7Br 1.3.6.1.4.1.4618.1.2.2.1.2
OBJECT IDENTIFIER    

ss7TrunkCfgTable 1.3.6.1.4.1.4618.1.2.2.1.2.1
ISDN Trunk Table. The Information about ISDN Trunk(s) in MSSC are provided in this table. This table has the index ss7TrunkId (Integer).
OBJECT-TYPE    
  SEQUENCE OF  
    Ss7TrunkCfgEntry

ss7TrunkCfgEntry 1.3.6.1.4.1.4618.1.2.2.1.2.1.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  Ss7TrunkCfgEntry  

ss7TrunkId 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.1
Id for the trunk. Can be any integer 1-65535.
OBJECT-TYPE    
  INTEGER 1..65535  

ss7TrunkName 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.2
Name for the trunk. Can be any combination of alphanumeric characters. Spaces are not allowed and cannot exceed 15 characters.
OBJECT-TYPE    
  NameString  

ss7TrunkGrpId 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.3
Id of the trunk group to which the trunk belongs. Can be any integer 1-65535.
OBJECT-TYPE    
  INTEGER 1..65535  

ss7TrunkXconnectId 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.4
Xconnect id
OBJECT-TYPE    
  INTEGER 1..65535  

ss7TrunkSlotId 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.5
Slot id
OBJECT-TYPE    
  INTEGER 1..65535  

ss7TrunkPortId 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.6
Port id
OBJECT-TYPE    
  INTEGER 1..65535  

ss7TrunkOpc 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.7
Originating point code (the Integer value). The Point Code should be converted into its Integer equivalent. For Example: 0-1-1 is converted as 257 (for ANSI) 0-1-2 is converted as 10 (for ITU)
OBJECT-TYPE    
  INTEGER 1..16777215  

ss7TrunkDpc 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.8
Destination point code ( the Integer Value). The Point Code should be converted into its Integer equivalent. For Example: 0-1-1 is converted as 257 (for ANSI) 0-1-2 is converted as 10 (for ITU)
OBJECT-TYPE    
  INTEGER 1..16777215  

ss7TrunkPhyType 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.9
Physical Interface Type possible options are 1) T1 (interface-t1) 2) T3 (interface-t3) 3) Unchannelized T3 (interface-ut3) 4) OC3 (interface-oc3) 5) Unchannelized T3 with compression (interface-ut3cp) 6) OC3 with compression (interface-oc3cp) 7) E
OBJECT-TYPE    
  IfType  

ss7TrunkMode 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.10
Trunk mode - ANSI/ITU
OBJECT-TYPE    
  Standard  

ss7TrunkE1MultiFrame 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.11
E1 multiFrame Type possible options are 1) CAS(1) 2) CCS(2)
OBJECT-TYPE    
  E1MultiFrame  

ss7TrunkE1CRC4 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.12
E1 Cyclic Redundancy Code, possible options are 1) enabled(1) 2) disable(2)
OBJECT-TYPE    
  E1CRC4  

ss7TrunkE1TransClk 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.13
E1 Transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)
OBJECT-TYPE    
  TransClkSrc  

ss7TrunkDS1LineType 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.14
DS1 Line Type possible options are 1) esF(1) 2) d4(2)
OBJECT-TYPE    
  DS1LineType  

ss7TrunkDS1LineCoding 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.15
DS1 Line Coding, possible options are 1) b8zs(1) 2) ami(2)
OBJECT-TYPE    
  DS1LineCoding  

ss7TrunkDS1TransClkSrc 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.16
DS1 Transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)
OBJECT-TYPE    
  TransClkSrc  

ss7TrunkDS1LBO 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.17
DS1 Line Build Out, possible options are 1) upTo133Feet(1) 2) upTo266Feet(2) 3) upTo399Feet(3) 4) upTo533Feet(4) 5) upTo655Feet(5) 6) negative7_5Db(6) 7) negative15Db(7) 8) negative22_5Db(8)
OBJECT-TYPE    
  DS1LBO  

ss7TrunkDS3LineType 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.18
DS3 Line Type possible options are 1) cbitParity(1) 2) clearChannel(2)
OBJECT-TYPE    
  DS3LineType  

ss7TrunkDS3TransClkSrc 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.19
DS3 Transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)
OBJECT-TYPE    
  TransClkSrc  

ss7TrunkDS3LBO 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.20
DS3 Line Build Out possible options are 1) short(1) 2) long(2)
OBJECT-TYPE    
  DS3LBO  

ss7TrunkDS3DS1LineType 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.21
DS3DS1 Line Type possible options are 1) esF(1) 2) d4(2)
OBJECT-TYPE    
  DS1LineType  

ss7TrunkDS3DS1TransClkSrc 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.22
DS3DS1ansmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)
OBJECT-TYPE    
  TransClkSrc  

ss7TrunkOC3TransClkSrc 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.23
OC3 Transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)
OBJECT-TYPE    
  TransClkSrc  

ss7TrunkUNCHE3TransClkSrc 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.24
UNCHANNELIZED E3 Transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)
OBJECT-TYPE    
  TransClkSrc  

ss7TrunkDS3ATMLineType 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.25
DS3-ATM Line Type possible options are 1) cbitParity(1) 2) clearChannel(2)
OBJECT-TYPE    
  DS3LineType  

ss7TrunkDS3ATMCellMap 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.26
DS3-ATM Cell Mapping, possible options are 1) plcp(1) 2) directMapping(2)
OBJECT-TYPE    
  DS3ATMCellMap  

ss7TrunkDS3ATMTransClkSrc 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.27
DS3-ATM transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)
OBJECT-TYPE    
  TransClkSrc  

ss7TrunkDS3ATMLBO 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.28
DS3-ATM Line Build Out possible options are 1) short(1) 2) long(2)
OBJECT-TYPE    
  DS3LBO  

ss7TrunkRowStatus 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.29
Current Status (configurational Status) of this SS7 Trunk. To Configure this Link, the only option is 'CREATEANDWAIT' To Delete this Link, the only option is 'DESTROY' For the 'GET' Operation, the possible options are 1) active 2) notinservice 3) no
OBJECT-TYPE    
  RowStatus  

ss7TrunkOpStatus 1.3.6.1.4.1.4618.1.2.2.1.2.1.1.30
Current Status (Operational Status) of this SS7 Trunk. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down
OBJECT-TYPE    
  OpStatus  

ss7CktCfgTable 1.3.6.1.4.1.4618.1.2.2.1.2.2
SS7 Circuit Table. The Information about SS7 Circuit(s) in MSSC are provided in this table. This table has two indices: ss7CktTrunkId and ss7CktChnlId (both Integer).
OBJECT-TYPE    
  SEQUENCE OF  
    Ss7CktCfgEntry

ss7CktCfgEntry 1.3.6.1.4.1.4618.1.2.2.1.2.2.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  Ss7CktCfgEntry  

ss7CktTrunkId 1.3.6.1.4.1.4618.1.2.2.1.2.2.1.1
User Assigned Trunk id.
OBJECT-TYPE    
  INTEGER 1..65535  

ss7CktChnlId 1.3.6.1.4.1.4618.1.2.2.1.2.2.1.2
User Assigned Channel id
OBJECT-TYPE    
  INTEGER 1..65535  

ss7CktId 1.3.6.1.4.1.4618.1.2.2.1.2.2.1.3
Circuit id. The Id assingned to each of the circuits for a particular Trunk.
OBJECT-TYPE    
  INTEGER 1..4294967295  

ss7CktDpc 1.3.6.1.4.1.4618.1.2.2.1.2.2.1.4
Destination Point Code (The Integer Value). The Point Code should be converted into its Integer equivalent. For Example: 0-1-1 is converted as 257 (for ANSI) 0-1-2 is converted as 10 (for ITU)
OBJECT-TYPE    
  INTEGER 1..16777215  

ss7CktCic 1.3.6.1.4.1.4618.1.2.2.1.2.2.1.5
Circuit identifier code. Can be any integer from 1) 1-4095 for ITU 2) 1-16383 for ANSI
OBJECT-TYPE    
  INTEGER 1..16383  

ss7CktDir 1.3.6.1.4.1.4618.1.2.2.1.2.2.1.6
Traffic direction: Possible options are : 1) IN 2) OUT 3) BOTH
OBJECT-TYPE    
  Direction  

ss7CktPriority 1.3.6.1.4.1.4618.1.2.2.1.2.2.1.7
Traffic priority
OBJECT-TYPE    
  INTEGER 1..65535  

ss7CktT3 1.3.6.1.4.1.4618.1.2.2.1.2.2.1.8
T3 timer. Default Value is 0 milliSeconds
OBJECT-TYPE    
  INTEGER 0..120  

ss7CktT12 1.3.6.1.4.1.4618.1.2.2.1.2.2.1.9
T12 timer - blocking sent. Default Value is 40 milliSeconds
OBJECT-TYPE    
  INTEGER 4000..60000  

ss7CktT13 1.3.6.1.4.1.4618.1.2.2.1.2.2.1.10
T13 timer - initial blocking sent. Default Value is 600 milliSeconds
OBJECT-TYPE    
  INTEGER 60..900  

ss7CktT14 1.3.6.1.4.1.4618.1.2.2.1.2.2.1.11
T14 timer - unblocking sent. Default Value is 40 milliSeconds
OBJECT-TYPE    
  INTEGER 4000..60000  

ss7CktT15 1.3.6.1.4.1.4618.1.2.2.1.2.2.1.12
T15 timer - initial unblocking sent. Default Value is 600 milliSeconds
OBJECT-TYPE    
  INTEGER 60..900  

ss7CktT16 1.3.6.1.4.1.4618.1.2.2.1.2.2.1.13
T16 timer - reset sent. Default Value is 40 milliSeconds
OBJECT-TYPE    
  INTEGER 4000..60000  

ss7CktT17 1.3.6.1.4.1.4618.1.2.2.1.2.2.1.14
T17 timer - initial reset sent. Default Value is 600 milliSeconds
OBJECT-TYPE    
  INTEGER 60..900  

ss7CktTVal 1.3.6.1.4.1.4618.1.2.2.1.2.2.1.15
TVal timer - initial reset sent. Default Value is 100 milliSeconds
OBJECT-TYPE    
  INTEGER 10000  

ss7CktRowStatus 1.3.6.1.4.1.4618.1.2.2.1.2.2.1.16
Current Status (configurational Status) of this SS7 Circuit. To Configure this circuit, the only option is 'CREATEANDWAIT'. To Delete this circuit, the only option is 'DESTROY'. To Modify any of the Circuit Timers, the only option is 'MODIFYTIMER'. Fo
OBJECT-TYPE    
  CktRowStatus  

ss7CktOpStatus 1.3.6.1.4.1.4618.1.2.2.1.2.2.1.17
Current Status (Operational Status) of this SS7 Circuit. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down 3) block
OBJECT-TYPE    
  CktOpStatus  

ss7CICTimerTable 1.3.6.1.4.1.4618.1.2.2.1.2.3
SS7 Circuit CIC Timer Table. The Information about SS7 Circuit(s) Timers in MSSC are provided in this table.User can Modify any Timer(s) in this table. This table has two indices: ss7CktTmrDpc and ss7CktTmrCic (both Integer).
OBJECT-TYPE    
  SEQUENCE OF  
    Ss7CicTmrEntry

ss7CicTmrEntry 1.3.6.1.4.1.4618.1.2.2.1.2.3.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  Ss7CicTmrEntry  

ss7CktTmrDpc 1.3.6.1.4.1.4618.1.2.2.1.2.3.1.1
Destination Point Code (The Integer Value). The Point Code should be converted into its Integer equivalent. For Example: 0-1-1 is converted as 257 (for ANSI) 0-1-2 is converted as 10 (for ITU)
OBJECT-TYPE    
  INTEGER 1..16777215  

ss7CktTmrCic 1.3.6.1.4.1.4618.1.2.2.1.2.3.1.2
Circuit identifier code. Can be any integer 1-65535.
OBJECT-TYPE    
  INTEGER 1..65535  

ss7CktTmrT3 1.3.6.1.4.1.4618.1.2.2.1.2.3.1.3
T3 timer. Default Value is 0 milliSeconds
OBJECT-TYPE    
  INTEGER 1..65535  

ss7CktTmrT12 1.3.6.1.4.1.4618.1.2.2.1.2.3.1.4
T12 timer - blocking sent. Default Value is 40 milliSeconds
OBJECT-TYPE    
  INTEGER 1..65535  

ss7CktTmrT13 1.3.6.1.4.1.4618.1.2.2.1.2.3.1.5
T13 timer - initial blocking sent. Default Value is 600 milliSeconds
OBJECT-TYPE    
  INTEGER 1..65535  

ss7CktTmrT14 1.3.6.1.4.1.4618.1.2.2.1.2.3.1.6
T14 timer - unblocking sent. Default Value is 40 milliSeconds
OBJECT-TYPE    
  INTEGER 1..65535  

ss7CktTmrT15 1.3.6.1.4.1.4618.1.2.2.1.2.3.1.7
T15 timer - initial unblocking sent. Default Value is 600 milliSeconds
OBJECT-TYPE    
  INTEGER 1..65535  

ss7CktTmrT16 1.3.6.1.4.1.4618.1.2.2.1.2.3.1.8
T16 timer - reset sent. Default Value is 40 milliSeconds
OBJECT-TYPE    
  INTEGER 1..65535  

ss7CktTmrT17 1.3.6.1.4.1.4618.1.2.2.1.2.3.1.9
T17 timer - initial reset sent. Default Value is 600 milliSeconds
OBJECT-TYPE    
  INTEGER 1..65535  

ss7CktTmrTVal 1.3.6.1.4.1.4618.1.2.2.1.2.3.1.10
TVal timer - initial reset sent. Default Value is 100 milliSeconds
OBJECT-TYPE    
  INTEGER 1..65535  

ss7CktTmrRowStatus 1.3.6.1.4.1.4618.1.2.2.1.2.3.1.11
This is a command to MODIFY a Timer. A 'GET' operation on this object will display the default value [no action]. The possible option for 'SET' operation is: 1)modify
OBJECT-TYPE    
  ModifyTmrStatus  

ss7BCktCfgTable 1.3.6.1.4.1.4618.1.2.2.1.2.4
SS7 B-Circuit Table. The Information about SS7 B-Circuit(s) in MSSC are provided in this table.This table has two indices: ss7BCktVpi and ss7BCktVci (both Integer).
OBJECT-TYPE    
  SEQUENCE OF  
    Ss7BCktCfgEntry

ss7BCktCfgEntry 1.3.6.1.4.1.4618.1.2.2.1.2.4.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  Ss7BCktCfgEntry  

ss7BCktVpi 1.3.6.1.4.1.4618.1.2.2.1.2.4.1.1
Broadband Virtual Path Indentifier. Can be any integer 1-65535.
OBJECT-TYPE    
  INTEGER 1..65535  

ss7BCktVci 1.3.6.1.4.1.4618.1.2.2.1.2.4.1.2
Broadband Virtual Channel Identifier. Can be any integer 1-65535.
OBJECT-TYPE    
  INTEGER 1..65535  

ss7BCktTrunkId 1.3.6.1.4.1.4618.1.2.2.1.2.4.1.3
Trunk id.
OBJECT-TYPE    
  INTEGER 1..65535  

ss7BCktDpc 1.3.6.1.4.1.4618.1.2.2.1.2.4.1.4
Broadband Circuit Destination Point Code (The Integer Value). The Point Code should be converted into its Integer equivalent. For Example: 0-1-1 is converted as 257 (for ANSI) 0-1-2 is converted as 10 (for ITU)
OBJECT-TYPE    
  INTEGER 1..16777215  

ss7BCktCic 1.3.6.1.4.1.4618.1.2.2.1.2.4.1.5
Circuit identifier code. Can be any integer from : 1) 1-16383 for ANSI 2) 1-4095 for ITU
OBJECT-TYPE    
  INTEGER 1..16383  

ss7BCktDir 1.3.6.1.4.1.4618.1.2.2.1.2.4.1.6
Denotes Traffic direction. Possible Values are: 1) in 2) out 3) both
OBJECT-TYPE    
  Direction  

ss7BCktPriority 1.3.6.1.4.1.4618.1.2.2.1.2.4.1.7
Traffic priority
OBJECT-TYPE    
  INTEGER 1..65535  

ss7BCktT3 1.3.6.1.4.1.4618.1.2.2.1.2.4.1.8
T3 timer. Default Value is 0 milliSeconds
OBJECT-TYPE    
  INTEGER 1..65535  

ss7BCktT12 1.3.6.1.4.1.4618.1.2.2.1.2.4.1.9
T12 timer - blocking sent. Default Value is 40 milliSeconds
OBJECT-TYPE    
  INTEGER 1..65535  

ss7BCktT13 1.3.6.1.4.1.4618.1.2.2.1.2.4.1.10
T13 timer - initial blocking sent. Default Value is 600 milliSeconds
OBJECT-TYPE    
  INTEGER 1..65535  

ss7BCktT14 1.3.6.1.4.1.4618.1.2.2.1.2.4.1.11
T14 timer - unblocking sent. Default Value is 40 milliSeconds
OBJECT-TYPE    
  INTEGER 1..65535  

ss7BCktT15 1.3.6.1.4.1.4618.1.2.2.1.2.4.1.12
T15 timer - initial unblocking sent. Default Value is 600 milliSeconds
OBJECT-TYPE    
  INTEGER 1..65535  

ss7BCktT16 1.3.6.1.4.1.4618.1.2.2.1.2.4.1.13
T16 timer - reset sent. Default Value is 40 milliSeconds
OBJECT-TYPE    
  INTEGER 1..65535  

ss7BCktT17 1.3.6.1.4.1.4618.1.2.2.1.2.4.1.14
T17 timer - initial reset sent. Default Value is 600 milliSeconds
OBJECT-TYPE    
  INTEGER 1..65535  

ss7BCktTVal 1.3.6.1.4.1.4618.1.2.2.1.2.4.1.15
TVal timer - initial reset sent. Default Value is 100 milliSeconds
OBJECT-TYPE    
  INTEGER 1..65535  

ss7BCktRowStatus 1.3.6.1.4.1.4618.1.2.2.1.2.4.1.16
Current Status (configurational Status) of this SS7 B-Circuit. To Configure this circuit, the only option is 'CREATEANDWAIT'. To Modify any of the timers the only option is 'MODIFYTIMER' . To Delete this circuit, the only option is 'DESTROY'. For the
OBJECT-TYPE    
  CktRowStatus  

ss7BCktOpStatus 1.3.6.1.4.1.4618.1.2.2.1.2.4.1.17
Current Status (Operational Status) of this SS7 B-Circuit. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down 3) block
OBJECT-TYPE    
  CktOpStatus  

ss7CktMgmntGroup 1.3.6.1.4.1.4618.1.2.2.1.2.5
OBJECT IDENTIFIER    

ss7CktMgmntTable 1.3.6.1.4.1.4618.1.2.2.1.2.5.1
SS7 Circuit Management Table. The Management Commands for SS7 Circuits(s) in MSSC are provided in this table. This table has two indices: ss7CktMgmntTrnkId and ss7CktMgmntChnlId (both Integer).
OBJECT-TYPE    
  SEQUENCE OF  
    Ss7CktMgmntEntry

ss7CktMgmntEntry 1.3.6.1.4.1.4618.1.2.2.1.2.5.1.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  Ss7CktMgmntEntry  

ss7CktMgmntTrnkId 1.3.6.1.4.1.4618.1.2.2.1.2.5.1.1.1
Trunk id.
OBJECT-TYPE    
  INTEGER  

ss7CktMgmntChnlId 1.3.6.1.4.1.4618.1.2.2.1.2.5.1.1.2
Channel id
OBJECT-TYPE    
  INTEGER  

ss7CktMgmntRepNum 1.3.6.1.4.1.4618.1.2.2.1.2.5.1.1.3
Repeat Number for this operation. This option will allow consecutive CIC to be reset
OBJECT-TYPE    
  INTEGER 1..65535  

ss7CktMgmntCmd 1.3.6.1.4.1.4618.1.2.2.1.2.5.1.1.4
Management Command for Blocking/Unblocking any call setup on the specified channel. The option of repnum is provided to allow consecutive CIC to be blocked/unblocked The possible options are : 1) Block 2) UnBlock 3) Noaction [default]
OBJECT-TYPE    
  BlockOperation  

ss7CICMgmntTable 1.3.6.1.4.1.4618.1.2.2.1.2.5.2
SS7 Circuit CIC Management Table. The Management Commands for SS7 Circuits(s) in MSSC are provided in this table. This table has two indices: ss7CktMgmtDPC and ss7CktMgmtCIC (both Integer).
OBJECT-TYPE    
  SEQUENCE OF  
    Ss7CICMgmntEntry

ss7CICMgmntEntry 1.3.6.1.4.1.4618.1.2.2.1.2.5.2.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  Ss7CICMgmntEntry  

ss7CktMgmtDPC 1.3.6.1.4.1.4618.1.2.2.1.2.5.2.1.1
Destination Point Code (The Integer Value). The Point Code should be converted into its Integer equivalent. For Example: 0-1-1 is converted as 257 (for ANSI) 0-1-2 is converted as 10 (for ITU)
OBJECT-TYPE    
  INTEGER  

ss7CktMgmtCIC 1.3.6.1.4.1.4618.1.2.2.1.2.5.2.1.2
Circuit identifier code. Can be any integer from 1) 1-4095 for ITU 2) 1-16383 for ANSI
OBJECT-TYPE    
  INTEGER  

ss7CktRepNum 1.3.6.1.4.1.4618.1.2.2.1.2.5.2.1.3
Repeat Number for this operation. This option will allow consecutive CIC to be reset
OBJECT-TYPE    
  INTEGER 1..65535  

ss7CicRange 1.3.6.1.4.1.4618.1.2.2.1.2.5.2.1.4
Range for this operation. This option will allow consecutive CIC to be reset
OBJECT-TYPE    
  INTEGER 1..65535  

ss7CICMgmntCmd 1.3.6.1.4.1.4618.1.2.2.1.2.5.2.1.5
Management Command for Blocking/Unblocking any call setup on the specified channel. The option of repnum is provided to allow consecutive CIC to be blocked/unblocked The possible options are : 1) Block 2) UnBlock [default]
OBJECT-TYPE    
  CircuitControlStatus  

mtp2 1.3.6.1.4.1.4618.1.2.2.1.3
OBJECT IDENTIFIER    

mtp2LinkTmrCfgTable 1.3.6.1.4.1.4618.1.2.2.1.3.1
MTP2 Link Timer Table. The Information about MTP2 Link Timers in MSSC are provided in this table. User can Modify Timer(s) from this table. This table has one index: mtp2LinkId (Integer).
OBJECT-TYPE    
  SEQUENCE OF  
    Mtp2LinkTmrCfgEntry

mtp2LinkTmrCfgEntry 1.3.6.1.4.1.4618.1.2.2.1.3.1.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  Mtp2LinkTmrCfgEntry  

mtp2LinkId 1.3.6.1.4.1.4618.1.2.2.1.3.1.1.1
Link id. Can be any integer 1-65535.
OBJECT-TYPE    
  INTEGER 1..65535  

mtp2T1 1.3.6.1.4.1.4618.1.2.2.1.3.1.1.2
t1 timer - for aligned ready condition GR-606-CORE, ISSUE 1, June 1994. Default Value is 13000 milliSeconds
OBJECT-TYPE    
  INTEGER 13000..50000  

mtp2T2 1.3.6.1.4.1.4618.1.2.2.1.3.1.1.3
t2 timer - Timer for out-of-alignment GR-606-CORE, ISSUE 1, June 1994. Default Value is 11500 milliSeconds
OBJECT-TYPE    
  INTEGER 5000..50000  

mtp2T3 1.3.6.1.4.1.4618.1.2.2.1.3.1.1.4
t3 timer - Timer for aligned condition GR-606-CORE, ISSUE 1, June 1994. Default Value is 11500 milliSeconds
OBJECT-TYPE    
  INTEGER 1000..15000  

mtp2T4n 1.3.6.1.4.1.4618.1.2.2.1.3.1.1.5
t4n timer - Normal proving period GR-606-CORE, ISSUE 1, June 1994. Default Value is 2000 milliSeconds
OBJECT-TYPE    
  INTEGER 2070..9500  

mtp2T4e 1.3.6.1.4.1.4618.1.2.2.1.3.1.1.6
t4e timer - Emergency proving period GR-606-CORE, ISSUE 1, June 1994. Default Value is 500 milliSeconds
OBJECT-TYPE    
  INTEGER 400..600  

mtp2T5 1.3.6.1.4.1.4618.1.2.2.1.3.1.1.7
t5 timer - Busy status transmission interval GR-606-CORE, ISSUE 1, June 1994. Default Value is 100 milliSeconds
OBJECT-TYPE    
  INTEGER 80..120  

mtp2T6 1.3.6.1.4.1.4618.1.2.2.1.3.1.1.8
t6 timer - Supervision of remote congestion timer GR-606-CORE, ISSUE 1, June 1994. Default Value is 3000 milliSeconds
OBJECT-TYPE    
  INTEGER 3000..6000  

mtp2T7 1.3.6.1.4.1.4618.1.2.2.1.3.1.1.9
t7 timer - Excessive delay of ack GR-606-CORE, ISSUE 1, June 1994. Default Value is 500 milliSeconds
OBJECT-TYPE    
  INTEGER 500..2000  

mtp2RowStatus 1.3.6.1.4.1.4618.1.2.2.1.3.1.1.10
Current Status (configurational Status) of this MTP2 Link Timer. To Modify any Timer for this link, the only option is 'MODIFYTIMER'. For the 'GET' Operation, the possible options are 1) active 2) notinservice 3) notready 4) modified 5) up 6) down
OBJECT-TYPE    
  TmrRowStatus  

mtp2OpStatus 1.3.6.1.4.1.4618.1.2.2.1.3.1.1.11
Current Status (Operational Status) of this MTP2 Link Timer. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down
OBJECT-TYPE    
  OpStatus  

mtp3 1.3.6.1.4.1.4618.1.2.2.1.4
OBJECT IDENTIFIER    

mtp3GenTmrCfgGroup 1.3.6.1.4.1.4618.1.2.2.1.4.1
OBJECT IDENTIFIER    

mtp3T15 1.3.6.1.4.1.4618.1.2.2.1.4.1.1
T15 timer - Signal route set congestion test interval GR-606-CORE, ISSUE 1, June 1994. Default Value is 3000 milliSeconds
OBJECT-TYPE    
  INTEGER 2000..3000  

mtp3T16 1.3.6.1.4.1.4618.1.2.2.1.4.1.2
T16 timer - Transfer controlled update GR-606-CORE, ISSUE 1, June 1994. Default Value is 1400 milliSeconds
OBJECT-TYPE    
  INTEGER 1400..2000  

mtp3T18 1.3.6.1.4.1.4618.1.2.2.1.4.1.3
T18 timer - Timer for links to become available. Not Applicable to ANSI. Default Value is 1400 milliSeconds
OBJECT-TYPE    
  INTEGER 0..65535  

mtp3T19 1.3.6.1.4.1.4618.1.2.2.1.4.1.4
T19 timer - Timer to receive all traffic restart. Not Applicable to ANSI. Default Value is 0
OBJECT-TYPE    
  INTEGER 67000..69000  

mtp3T20 1.3.6.1.4.1.4618.1.2.2.1.4.1.5
T20 timer - BroadCast traffic restart interval. Not Applicable to ANSI.
OBJECT-TYPE    
  INTEGER 59000..61000  

mtp3T21 1.3.6.1.4.1.4618.1.2.2.1.4.1.6
T21 timer - Interval to restart traffic route through adjacent SP
OBJECT-TYPE    
  INTEGER 63000..65000  

mtp3T26 1.3.6.1.4.1.4618.1.2.2.1.4.1.7
T26 timer - Timer at restarting SP waiting to repeat TRW GR-606-CORE, ISSUE 1, June 1994. Default Value is 13500 milliSeconds
OBJECT-TYPE    
  INTEGER 12000..15000  

mtp3T30 1.3.6.1.4.1.4618.1.2.2.1.4.1.8
T30 timer - Route Instance timer
OBJECT-TYPE    
  INTEGER 30000..35000  

mtp3GenTmrRowStatus 1.3.6.1.4.1.4618.1.2.2.1.4.1.9
This is a command to MODIFY a Timer. A 'GET' operation on this object will display the default value [no action]. The possible option for 'SET' operation is: 1)modify
OBJECT-TYPE    
  ModifyTmrStatus  

mtp3LinkCfgTable 1.3.6.1.4.1.4618.1.2.2.1.4.2
MTP3 Link Timer Table. The Information about MTP3 Link Timers in MSSC are provided in this table. User can Modify Timer(s) from this table. This table has one index: mtp3LinkId (Integer).
OBJECT-TYPE    
  SEQUENCE OF  
    Mtp3LinkCfgEntry

mtp3LinkCfgEntry 1.3.6.1.4.1.4618.1.2.2.1.4.2.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  Mtp3LinkCfgEntry  

mtp3LinkId 1.3.6.1.4.1.4618.1.2.2.1.4.2.1.1
Link id GR-606-CORE, ISSUE 1, June 1994
OBJECT-TYPE    
  INTEGER 1..65535  

mtp3T1 1.3.6.1.4.1.4618.1.2.2.1.4.2.1.2
T1 timer - Transmission delay following changeover GR-606-CORE, ISSUE 1, June 1994. Default Value is 500 milliSeconds
OBJECT-TYPE    
  INTEGER 500..1200  

mtp3T2 1.3.6.1.4.1.4618.1.2.2.1.4.2.1.3
T2 timer - changeover ack timer GR-606-CORE, ISSUE 1, June 1994. Default Value is 700 milliSeconds
OBJECT-TYPE    
  INTEGER 700..2000  

mtp3T3 1.3.6.1.4.1.4618.1.2.2.1.4.2.1.4
T3 timer - Transmission delay following changeback GR-606-CORE, ISSUE 1, June 1994. Default Value is 500 milliSeconds
OBJECT-TYPE    
  INTEGER 500..1200  

mtp3T4 1.3.6.1.4.1.4618.1.2.2.1.4.2.1.5
T4 timer - Changeback ack timer (first attempt) GR-606-CORE, ISSUE 1, June 1994. Default is 500 milliSeconds
OBJECT-TYPE    
  INTEGER 500..1200  

mtp3T5 1.3.6.1.4.1.4618.1.2.2.1.4.2.1.6
T5 timer - Changeback ack timer (subsequent attempt) GR-606-CORE, ISSUE 1, June 1994. Default is 500 milliSeconds
OBJECT-TYPE    
  INTEGER 500..1200  

mtp3T6 1.3.6.1.4.1.4618.1.2.2.1.4.2.1.7
T6 timer - Controlled rerouting transmission delay GR-606-CORE, ISSUE 1, June 1994. Default Value is 500 milliSeconds
OBJECT-TYPE    
  INTEGER 500..1200  

mtp3T7 1.3.6.1.4.1.4618.1.2.2.1.4.2.1.8
T7 Timer - Link connection ack timer
OBJECT-TYPE    
  INTEGER 500..1200  

mtp3T12 1.3.6.1.4.1.4618.1.2.2.1.4.2.1.9
T12 timer - Uninhibit acknowledge timer GR-606-CORE, ISSUE 1, June 1994. Default Value is 1000 milliSeconds
OBJECT-TYPE    
  INTEGER 800..1500  

mtp3T13 1.3.6.1.4.1.4618.1.2.2.1.4.2.1.10
T13 timer - Forced uninhibit ack timer GR-606-CORE, ISSUE 1, June 1994. Default Value is 1000 milliSeconds.
OBJECT-TYPE    
  INTEGER 800..1500  

mtp3T14 1.3.6.1.4.1.4618.1.2.2.1.4.2.1.11
T14 timer - Inhibit ack timer GR-606-CORE, ISSUE 1, June 1994. Default Value is 3000 milliSeconds
OBJECT-TYPE    
  INTEGER 2000..3000  

mtp3T17 1.3.6.1.4.1.4618.1.2.2.1.4.2.1.12
T17 timer - Timing to restart of initial alignment GR-606-CORE, ISSUE 1, June 1994. Default Value is 1000 milliSeconds
OBJECT-TYPE    
  INTEGER 800..1500  

mtp3T22 1.3.6.1.4.1.4618.1.2.2.1.4.2.1.13
T20 timer - Waiting to repeat local inhibit test. Default Value is 10000 milliSeconds
OBJECT-TYPE    
  INTEGER 180..360  

mtp3T23 1.3.6.1.4.1.4618.1.2.2.1.4.2.1.14
T21 timer - Waiting to repeat remote inhibit test. Default Value is 10000 milliSeconds
OBJECT-TYPE    
  INTEGER 180..360  

mtp3T24 1.3.6.1.4.1.4618.1.2.2.1.4.2.1.15
T24 timer - Stabilizing timer.
OBJECT-TYPE    
  INTEGER 5000..5000  

mtp3T31 1.3.6.1.4.1.4618.1.2.2.1.4.2.1.16
T31 timer - Timer to detect a link in false link congestion. GR-606-CORE, ISSUE 1, June 1994. Default Value is 30000 milliSeconds
OBJECT-TYPE    
  INTEGER 10..120  

mtp3T32 1.3.6.1.4.1.4618.1.2.2.1.4.2.1.17
T32 timer - SLT timer
OBJECT-TYPE    
  INTEGER 4..12  

mtp3T33 1.3.6.1.4.1.4618.1.2.2.1.4.2.1.18
T33 timer - Timer to detect a link in false link congestion. GR-606-CORE, ISSUE 1, June 1994. Default Value is 30000 milliSeconds
OBJECT-TYPE    
  INTEGER 60..600  

mtp3T34 1.3.6.1.4.1.4618.1.2.2.1.4.2.1.19
T34 timer - Timer to detect a link in false link congestion. GR-606-CORE, ISSUE 1, June 1994. Default Value is 30000 milliSeconds
OBJECT-TYPE    
  INTEGER 30..90  

mtp3T35 1.3.6.1.4.1.4618.1.2.2.1.4.2.1.20
T35 timer - periodic signalling link test timer GR-606-CORE, ISSUE 1, June 1994. Default Value is 30000 milliSeconds
OBJECT-TYPE    
  INTEGER 10..120  

mtp3T36 1.3.6.1.4.1.4618.1.2.2.1.4.2.1.21
T36 timer - Probation timer for link oscillation. Not in bellcore. Default Value is 30000 milliSeconds
OBJECT-TYPE    
  INTEGER 60..600  

mtp3T37 1.3.6.1.4.1.4618.1.2.2.1.4.2.1.22
T37 timer - Suspension Timer for link oscillation. Not in bellcore. Default Value is 30000 milliSeconds
OBJECT-TYPE    
  INTEGER 5..120  

mtp3TFLC 1.3.6.1.4.1.4618.1.2.2.1.4.2.1.23
TFLC timer - Flow control request timer. Not in bellcore.
OBJECT-TYPE    
  INTEGER 1..65535  

mtp3TBND 1.3.6.1.4.1.4618.1.2.2.1.4.2.1.24
TBND timer - Bind confirm wait timer. Not in bellcore.
OBJECT-TYPE    
  INTEGER 1..65535  

mtp3RowStatus 1.3.6.1.4.1.4618.1.2.2.1.4.2.1.25
Current Status (configurational Status) of this MTP3 Link Timer. To Modify any Timer for this link, the only option is 'MODIFYTIMER'. For the 'GET' Operation, the possible options are 1) active 2) notinservice 3) notready 4) modified 5) up 6) down
OBJECT-TYPE    
  TmrRowStatus  

mtp3OpStatus 1.3.6.1.4.1.4618.1.2.2.1.4.2.1.26
Current Status (Operational Status) of this MTP3 Link Timer. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down
OBJECT-TYPE    
  OpStatus  

isup 1.3.6.1.4.1.4618.1.2.2.1.5
OBJECT IDENTIFIER    

isupTimerCfgTable 1.3.6.1.4.1.4618.1.2.2.1.5.1
Isup Timer Table. The Information about ISUPTimers in MSSC are provided in this table. User can Modify Timer(s) from this table. This table has one index: isupTmrSS7Type (TimerType).
OBJECT-TYPE    
  SEQUENCE OF  
    IsupTimerCfgEntry

isupTimerCfgEntry 1.3.6.1.4.1.4618.1.2.2.1.5.1.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  IsupTimerCfgEntry  

isupTimerType 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.1
Index for this IsupTimer Table, is an enumerated data type ansi(1), itu(2)
OBJECT-TYPE    
  TimerType 1..2  

isupTmrT1 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.2
T1 timer - release sent, GR-246-CORE, Issue 2, December 1997. Default Value is 4000 milliSeconds
OBJECT-TYPE    
  INTEGER 4000..60000  

isupTmrT2 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.3
T2 timer - suspend received, GR-246-CORE, Issue 2, December 1997. Default Value is 0 milliSeconds
OBJECT-TYPE    
  INTEGER 0..180  

isupTmrT5 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.4
T5 timer - initial release sent GR-246-CORE, Issue 2, December 1997. Default Value is 60000 milliSeconds
OBJECT-TYPE    
  INTEGER 60..900  

isupTmrT6 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.5
T6 timer - suspend received GR-246-CORE, Issue 2, December 1997. Default Value is 10000 milliSeconds
OBJECT-TYPE    
  INTEGER 10000..32000  

isupTmrT7 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.6
T7 timer - latest address sent GR-246-CORE, Issue 2, December 1997. Default Value is 20000 milliSeconds
OBJECT-TYPE    
  INTEGER 20000..30000  

isupTmrT8 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.7
T8 - timer initial address received GR-246-CORE, Issue 2, December 1997. Default Value is 10000 milliSeconds
OBJECT-TYPE    
  INTEGER 10000..15000  

isupTmrT9 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.8
T9 timer - latest address sent after ACM GR-246-CORE, Issue 2, December 1997. Default Value is 120000 milliSeconds
OBJECT-TYPE    
  INTEGER 120..240  

isupTmrT18 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.9
T18 timer - group blocking sent GR-246-CORE, Issue 2, December 1997. Default Value is 4000 milliSeconds
OBJECT-TYPE    
  INTEGER 4000..60000  

isupTmrT19 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.10
T19 timer - initial group blocking sent GR-246-CORE, Issue 2, December 1997. Default Value is 60000 milliSeconds
OBJECT-TYPE    
  INTEGER 60..900  

isupTmrT20 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.11
T20 timer - group unblocking sent GR-246-CORE, Issue 2, December 1997. Default Value is 4000 milliSeconds
OBJECT-TYPE    
  INTEGER 4000..60000  

isupTmrT21 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.12
T21 timer - initial group unblocking sent GR-246-CORE, Issue 2, December 1997. Default Value is 60000 milliSeconds
OBJECT-TYPE    
  INTEGER 60..900  

isupTmrT22 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.13
T22 timer - group reset sent GR-246-CORE, Issue 2, December 1997. Default Value is 4000 milliSeconds
OBJECT-TYPE    
  INTEGER 4000..60000  

isupTmrT23 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.14
T23 timer - initial group reset sent GR-246-CORE, Issue 2, December 1997. Default Value is 60000 milliSeconds
OBJECT-TYPE    
  INTEGER 60..900  

isupTmrT27 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.15
T27 timer - waiting for continuity recheck GR-246-CORE, Issue 2, December 1997. Default Value is 200000 milliSeconds
OBJECT-TYPE    
  INTEGER 18..24  

isupTmrT28 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.16
T28 timer - circuit group query sent GR-246-CORE, Issue 2, December 1997. Default Value is 10000 milliSeconds
OBJECT-TYPE    
  INTEGER 10000..10000  

isupTmrT31 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.17
T31 timer - call reference frozen period GR-246-CORE, Issue 2, December 1997. Default Value is 360000 milliSeconds
OBJECT-TYPE    
  INTEGER 360  

isupTmrT33 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.18
T33 timer - INR sent GR-246-CORE, Issue 2, December 1997. Default Value is 12000 milliSeconds
OBJECT-TYPE    
  INTEGER 12000..15000  

isupTmrT34 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.19
T34 timer - currently unknown. Default Value is 10000 milliSeconds
OBJECT-TYPE    
  INTEGER 10000..15000  

isupTmrT36 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.20
T36 timer - waiting for continuity after recheck, in bellcore it is T34 GR-246-CORE, Issue 2, December 1997. Default Value is 2000 milliSeconds
OBJECT-TYPE    
  INTEGER 2000..4000  

isupTmrTCCR 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.21
tCCR timer - continuity recheck timer GR-246-CORE, Issue 2, December 1997. Default Value is 20000 milliSeconds
OBJECT-TYPE    
  INTEGER 20000..24000  

isupTmrTEX 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.22
TEX timer - Exit to be sent, currently not applicable
OBJECT-TYPE    
  INTEGER 1..65535  

isupTmrTCRM 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.23
TCRM timer - circuit reservation message sent. GR-246-CORE, Issue 2, December 1997. Default Value is 3000 milliSeconds
OBJECT-TYPE    
  INTEGER 3000..4000  

isupTmrTCRA 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.24
TCRA timer - circuit reservation acknowledgement sent. GR-246-CORE, Issue 2, December 1997. Default Value is 20000 milliSeconds
OBJECT-TYPE    
  INTEGER 0..20000  

isupTmrTCCRt 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.25
TCCRt timer - tCCR timer (o/g side). Default Value is 0 milliSeconds
OBJECT-TYPE    
  INTEGER 0..2000  

isupTmrTECt 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.26
tECT timer - Explicit Call Transfer -wait for loop prvnt rsp. Default Value is 0 milliSeconds
OBJECT-TYPE    
  INTEGER 1..65535  

isupTmrTGTCHG 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.27
Timer tGTCHG - Awaiting charging extended acknowledgement after having sent CHGE
OBJECT-TYPE    
  INTEGER 1..65535  

isupTmrTGRES 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.28
TGRS timer - at receipt of circuit group reset message, treat subsequent circuit group reset messages new only on this timer expiration.
OBJECT-TYPE    
  INTEGER 5000..5000  

isupTmrTFGR 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.29
TFGR timer - first group received timer GR-246-CORE, Issue 2, December 1997
OBJECT-TYPE    
  INTEGER 10000..120000  

isupTmrTRELRSP 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.30
Time tRELRSP - Awaiting for release response. Default Value is 0 milliSeconds
OBJECT-TYPE    
  INTEGER 1..65535  

isupTmrTFNLRELRS 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.31
Time tFNLRELRSP - Awaiting for final release response. Default Value is 0 milliSeconds
OBJECT-TYPE    
  INTEGER 1..65535  

isupTimerRowStatus 1.3.6.1.4.1.4618.1.2.2.1.5.1.1.32
This is a command to MODIFY a Timer. A 'GET' operation on this object will display the default value [no action]. The possible option for 'SET' operation is: 1)modify
OBJECT-TYPE    
  ModifyTmrStatus  

ss7Route 1.3.6.1.4.1.4618.1.2.2.1.6
OBJECT IDENTIFIER    

ss7RtDpcTable 1.3.6.1.4.1.4618.1.2.2.1.6.1
SS7 Route Dpc Table. The Information about Route(s) in MSSC are provided in this table. This table has one index: ss7RtDPC (Integer).
OBJECT-TYPE    
  SEQUENCE OF  
    Ss7RtDpcEntry

ss7RtDpcEntry 1.3.6.1.4.1.4618.1.2.2.1.6.1.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  Ss7RtDpcEntry  

ss7RtDPC 1.3.6.1.4.1.4618.1.2.2.1.6.1.1.1
The Route Destination Point Code (The Integer Value). The Point Code should be converted into its Integer equivalent. For Example: 0-1-1 is converted as 257 (for ANSI) 0-1-2 is converted as 10 (for ITU)
OBJECT-TYPE    
  INTEGER 1..16777215  

ss7RtCmbLinksetId 1.3.6.1.4.1.4618.1.2.2.1.6.1.1.2
SS7 Linkset Id which is already configured so far. An incorrect Linkset Id will result a failure at the time of 'CREATION' of the Route table for the specified DPC.
OBJECT-TYPE    
  INTEGER 1..65535  

ss7RtLoadShareType 1.3.6.1.4.1.4618.1.2.2.1.6.1.1.3
Load Share type(ANSI/ITU)
OBJECT-TYPE    
  Standard  

ss7RtRowStatus 1.3.6.1.4.1.4618.1.2.2.1.6.1.1.4
Current Status (configurational Status) of this SS7 Route. To Configure this Route, the only option is 'CREATEANDWAIT'. To Delete this Route, the only option is 'DESTROY'. For the 'GET' Operation, the possible options are 1) active 2) notinservice 3
OBJECT-TYPE    
  RowStatus  

ss7RtOpStatus 1.3.6.1.4.1.4618.1.2.2.1.6.1.1.5
Current Status (Operational Status) of this SS7 Route. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down
OBJECT-TYPE    
  OpStatus  

isdn 1.3.6.1.4.1.4618.1.2.2.2
OBJECT IDENTIFIER    

isdnTmrCfgTable 1.3.6.1.4.1.4618.1.2.2.2.1
ISDN Timer Table. The Information about ISDN Timers in MSSC are provided in this table. User can Modify Timer(s) from this table. This table has one index: isdnTnkId (Integer).
OBJECT-TYPE    
  SEQUENCE OF  
    IsdnTmrCfgEntry

isdnTmrCfgEntry 1.3.6.1.4.1.4618.1.2.2.2.1.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  IsdnTmrCfgEntry  

isdnTnkId 1.3.6.1.4.1.4618.1.2.2.2.1.1.1
Trunk id.
OBJECT-TYPE    
  INTEGER 1..65535  

isdnTmrT301 1.3.6.1.4.1.4618.1.2.2.2.1.1.2
T301 timer - alert received Recommandation Q.931, TABLE 9-1/Q931
OBJECT-TYPE    
  INTEGER 180..420  

isdnTmrT302 1.3.6.1.4.1.4618.1.2.2.2.1.1.3
T302 timer - SETUP ACK sent Receipt of INFO Recommandation Q.931, TABLE 9-1/Q931
OBJECT-TYPE    
  INTEGER 0..15000  

isdnTmrT303 1.3.6.1.4.1.4618.1.2.2.2.1.1.4
T303 timer - setup sent Recommandation Q.931, TABLE 9-1/Q931. Default Value is 4000 milliSeconds
OBJECT-TYPE    
  INTEGER 1000..4000  

isdnTmrT304 1.3.6.1.4.1.4618.1.2.2.2.1.1.5
T304 timer - setup ack received info sent alert Recommandation Q.931, TABLE 9-1/Q931. Default Value is 20000 milliSeconds
OBJECT-TYPE    
  INTEGER 0..20000  

isdnTmrT305 1.3.6.1.4.1.4618.1.2.2.2.1.1.6
T305 timer - disc w/ prog ind sent or disc sent Recommandation Q.931, TABLE 9-1/Q931. Default Value is 30000 milliSeconds
OBJECT-TYPE    
  INTEGER 2000..60000  

isdnTmrT306 1.3.6.1.4.1.4618.1.2.2.2.1.1.7
T306 timer - disc without prog ind sent Recommandation Q.931, TABLE 9-1/Q931. Default Value is 30000 milliSeconds
OBJECT-TYPE    
  INTEGER 30..150  

isdnTmrT307 1.3.6.1.4.1.4618.1.2.2.2.1.1.8
T307 timer - iusp ack sent Recommandation Q.931, TABLE 9-1/Q931. Default Value is 180000 milliSeconds
OBJECT-TYPE    
  INTEGER 0..180  

isdnTmrT308 1.3.6.1.4.1.4618.1.2.2.2.1.1.9
T308 timer - release sent Recommandation Q.931, TABLE 9-1/Q931. Default Value is 4000 milliSeconds
OBJECT-TYPE    
  INTEGER 2000..10000  

isdnTmrT310 1.3.6.1.4.1.4618.1.2.2.2.1.1.10
T310 timer - call proc received Recommandation Q.931, TABLE 9-1/Q931. Default Value is 10000 milliSeconds
OBJECT-TYPE    
  INTEGER 3000..10000  

isdnTmrT311 1.3.6.1.4.1.4618.1.2.2.2.1.1.11
T310 timer - call proc received, not in the network side
OBJECT-TYPE    
  INTEGER 0..65535  

isdnTmrT312 1.3.6.1.4.1.4618.1.2.2.2.1.1.12
T312 timer - setup sent on broadcast Recommandation Q.931, TABLE 9-1/Q931. Default Value is 6000 milliSeconds
OBJECT-TYPE    
  INTEGER 0..6000  

isdnTmrT313 1.3.6.1.4.1.4618.1.2.2.2.1.1.13
T313 timer - conn sent, not in BellCore network side
OBJECT-TYPE    
  INTEGER 0..65535  

isdnTmrT316 1.3.6.1.4.1.4618.1.2.2.2.1.1.14
T316 timer - restart sent interface Recommandation Q.931, TABLE 9-1/Q931. Default Value is 120000 milliSeconds
OBJECT-TYPE    
  INTEGER 10..120  

isdnTmrT318 1.3.6.1.4.1.4618.1.2.2.2.1.1.15
T318 timer - resume sent, not in bellcore network side
OBJECT-TYPE    
  INTEGER 0..65535  

isdnTmrT319 1.3.6.1.4.1.4618.1.2.2.2.1.1.16
T319 timer - suspend sent, not in Bellcore network side
OBJECT-TYPE    
  INTEGER 0..65535  

isdnTmrT322 1.3.6.1.4.1.4618.1.2.2.2.1.1.17
T322 timer - stat enq sent Recommandation Q.931, TABLE 9-1/Q931. Default Value is 4000 milliSeconds
OBJECT-TYPE    
  INTEGER 2000..10000  

isdnTmrT316C 1.3.6.1.4.1.4618.1.2.2.2.1.1.18
T316c Timer -Restart sent to individual channel
OBJECT-TYPE    
  INTEGER 30..120  

isdnTmrT330 1.3.6.1.4.1.4618.1.2.2.2.1.1.19
T330 Timer - Congestion with Upper
OBJECT-TYPE    
  INTEGER 0..65535  

isdnTmrT331 1.3.6.1.4.1.4618.1.2.2.2.1.1.20
T331 Timer - Congestion with lower
OBJECT-TYPE    
  INTEGER 0..65535  

isdnTmrT332 1.3.6.1.4.1.4618.1.2.2.2.1.1.21
T332 Timer - Service request sent
OBJECT-TYPE    
  INTEGER 0..65535  

isdnTmrTRST 1.3.6.1.4.1.4618.1.2.2.2.1.1.22
TRst Timer - Disconnect indication sent while restarting interface
OBJECT-TYPE    
  INTEGER 30..600  

isdnTmrTREST 1.3.6.1.4.1.4618.1.2.2.2.1.1.23
TREST Timer - Disconnect indication sent while NI2 restarting interface
OBJECT-TYPE    
  INTEGER 30..600  

isdnTmrTANS 1.3.6.1.4.1.4618.1.2.2.2.1.1.24
TAns Timer - Answer timer
OBJECT-TYPE    
  INTEGER 1..65553  

isdnTmrT396 1.3.6.1.4.1.4618.1.2.2.2.1.1.25
T396 Timer - t303 expired
OBJECT-TYPE    
  INTEGER 0..65535  

isdnTmrT397 1.3.6.1.4.1.4618.1.2.2.2.1.1.26
T397 Timer - Information sent on permanent signal
OBJECT-TYPE    
  INTEGER 0..65535  

isdnTrnkTmrRowStatus 1.3.6.1.4.1.4618.1.2.2.2.1.1.27
Current Status (configurational Status) of this Isdn Trunk Timer. To Modify any Timer for this Trunk, the only option is 'MODIFYTIMER'. For the 'GET' Operation, the possible options are 1) active 2) notinservice 3) notready 4) modified 5) up 6) do
OBJECT-TYPE    
  TmrRowStatus  

isdnTrnkTmrOpStatus 1.3.6.1.4.1.4618.1.2.2.2.1.1.28
Current Status (Operational Status) of this Isdn Timer. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down
OBJECT-TYPE    
  OpStatus  

isdnTrunkCfgTable 1.3.6.1.4.1.4618.1.2.2.2.2
ISDN Trunk Table. Information about the ISDN Trunk(s) in MSSC are provided in this table. The index of this table is isdnTrunkId (Integer)
OBJECT-TYPE    
  SEQUENCE OF  
    IsdnTrunkCfgEntry

isdnTrunkCfgEntry 1.3.6.1.4.1.4618.1.2.2.2.2.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  IsdnTrunkCfgEntry  

isdnTrunkId 1.3.6.1.4.1.4618.1.2.2.2.2.1.1
Trunk id. Can be any integer 1-65535.
OBJECT-TYPE    
  INTEGER 1..65535  

isdnTrunkName 1.3.6.1.4.1.4618.1.2.2.2.2.1.2
Trunk name. Can be any combinaton of alphanumeric characters. Spaces are not allowed.
OBJECT-TYPE    
  NameString  

isdnTrunkGrpId 1.3.6.1.4.1.4618.1.2.2.2.2.1.3
Trunk Group id to which the trunk belongs. Can be any integer 1-65535.
OBJECT-TYPE    
  INTEGER 1..65535  

isdnDchnlId 1.3.6.1.4.1.4618.1.2.2.2.2.1.4
D-Channel Id
OBJECT-TYPE    
  INTEGER 1..65535  

isdnTrunkType 1.3.6.1.4.1.4618.1.2.2.2.2.1.5
Trunk Type (nfas/fas).
OBJECT-TYPE    
  IsdnType  

isdnXconnectId 1.3.6.1.4.1.4618.1.2.2.2.2.1.6
Xconnect id
OBJECT-TYPE    
  INTEGER 1..65535  

isdnSlotId 1.3.6.1.4.1.4618.1.2.2.2.2.1.7
Slot id
OBJECT-TYPE    
  INTEGER 1..65535  

isdnPortId 1.3.6.1.4.1.4618.1.2.2.2.2.1.8
Port id
OBJECT-TYPE    
  INTEGER 1..65535  

isdnDirection 1.3.6.1.4.1.4618.1.2.2.2.2.1.9
Traffic direction. possible options are 1) in 2) out 3) both
OBJECT-TYPE    
  Direction  

isdnPriority 1.3.6.1.4.1.4618.1.2.2.2.2.1.10
Traffic priority
OBJECT-TYPE    
  IsdnPriority  

isdnDurthreshold 1.3.6.1.4.1.4618.1.2.2.2.2.1.11
Bad Call Duration Threshold
OBJECT-TYPE    
  INTEGER 1..65535  

isdnCntthreshold 1.3.6.1.4.1.4618.1.2.2.2.2.1.12
Bad Call Count Threshold
OBJECT-TYPE    
  INTEGER 1..65535  

isdnPhyIntfType 1.3.6.1.4.1.4618.1.2.2.2.2.1.13
Isdn Physical Interface Type possible options are 1) T1 (interface-t1) 2) T3 (interface-t3) 3) Unchannelized T3 (interface-ut3) 4) OC3 (interface-oc3) 5) Unchannelized T3 with compression (interface-ut3cp) 6) OC3 with compression (interface-oc3cp)
OBJECT-TYPE    
  IfType  

isdnDchnlTimeSlot 1.3.6.1.4.1.4618.1.2.2.2.2.1.14
D-Channel Time slot
OBJECT-TYPE    
  INTEGER 1..65535  

isdnE1MultiFrame 1.3.6.1.4.1.4618.1.2.2.2.2.1.15
E1 multiFrame Type possible options are 1) CAS(1) 2) CCS(2)
OBJECT-TYPE    
  E1MultiFrame  

isdnE1CRC4 1.3.6.1.4.1.4618.1.2.2.2.2.1.16
E1 Cyclic Redundancy Code, possible options are 1) enabled(1) 2) disable(2)
OBJECT-TYPE    
  E1CRC4  

isdnE1TransClk 1.3.6.1.4.1.4618.1.2.2.2.2.1.17
E1 Transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)
OBJECT-TYPE    
  TransClkSrc  

isdnDS1LineType 1.3.6.1.4.1.4618.1.2.2.2.2.1.18
DS1 Line Type possible options are 1) esF(1) 2) d4(2)
OBJECT-TYPE    
  DS1LineType  

isdnDS1LineCoding 1.3.6.1.4.1.4618.1.2.2.2.2.1.19
DS1 Line Coding, possible options are 1) b8zs(1) 2) ami(2)
OBJECT-TYPE    
  DS1LineCoding  

isdnDS1TransClkSrc 1.3.6.1.4.1.4618.1.2.2.2.2.1.20
DS1 Transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)
OBJECT-TYPE    
  TransClkSrc  

isdnDS1LBO 1.3.6.1.4.1.4618.1.2.2.2.2.1.21
DS1 Line Build Out, possible options are 1) upTo133Feet(1) 2) upTo266Feet(2) 3) upTo399Feet(3) 4) upTo533Feet(4) 5) upTo655Feet(5) 6) negative7_5Db(6) 7) negative15Db(7) 8) negative22_5Db(8)
OBJECT-TYPE    
  DS1LBO  

isdnDS3LineType 1.3.6.1.4.1.4618.1.2.2.2.2.1.22
DS3 Line Type possible options are 1) cbitParity(1) 2) clearChannel(2)
OBJECT-TYPE    
  DS3LineType  

isdnDS3TransClkSrc 1.3.6.1.4.1.4618.1.2.2.2.2.1.23
DS3 Transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)
OBJECT-TYPE    
  TransClkSrc  

isdnDS3LBO 1.3.6.1.4.1.4618.1.2.2.2.2.1.24
DS3 Line Build Out possible options are 1) short(1) 2) long(2)
OBJECT-TYPE    
  DS3LBO  

isdnDS3DS1LineType 1.3.6.1.4.1.4618.1.2.2.2.2.1.25
DS3DS1 Line Type possible options are 1) esF(1) 2) d4(2)
OBJECT-TYPE    
  DS1LineType  

isdnDS3DS1TransClkSrc 1.3.6.1.4.1.4618.1.2.2.2.2.1.26
DS3DS1 Transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)
OBJECT-TYPE    
  TransClkSrc  

isdnTrunkRowStatus 1.3.6.1.4.1.4618.1.2.2.2.2.1.27
Current Status (configurational Status) of this ISDN TRUNK. To Configure this Link, the only option is 'CREATEANDWAIT' To Delete this Link, the only option is 'DESTROY' For the 'GET' Operation, the possible options are 1) active 2) notinservice 3) n
OBJECT-TYPE    
  RowStatus  

isdnTrunkOpStatus 1.3.6.1.4.1.4618.1.2.2.2.2.1.28
Current Status (Operational Status) of this ISDN Trunk. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down 3) disable
OBJECT-TYPE    
  IsdnTrnkOpStatus  

isdnChnlStatusTable 1.3.6.1.4.1.4618.1.2.2.2.3
ISDN Channel Status Table. Information about the DS0 Channel(s) Status in MSSC are provided in this table. The index of this table is isdnStatusTrunkId (Integer)
OBJECT-TYPE    
  SEQUENCE OF  
    IsdnChnlStatusCfgEntry

isdnChnlStatusCfgEntry 1.3.6.1.4.1.4618.1.2.2.2.3.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  IsdnChnlStatusCfgEntry  

isdnStatusTrunkId 1.3.6.1.4.1.4618.1.2.2.2.3.1.1
OBJECT-TYPE    
  INTEGER 1..65535  

isdnStatusChnlId 1.3.6.1.4.1.4618.1.2.2.2.3.1.2
Channel id.
OBJECT-TYPE    
  INTEGER 1..65535  

isdnStatusChnlState 1.3.6.1.4.1.4618.1.2.2.2.3.1.3
Isdn Channel String.
OBJECT-TYPE    
  TrunkState  

isdnStatusChnlAllocMeth 1.3.6.1.4.1.4618.1.2.2.2.3.1.4
Isdn Channel AllocMeth.
OBJECT-TYPE    
  INTEGER 1..65535  

isdnStatusChnlSuConnId 1.3.6.1.4.1.4618.1.2.2.2.3.1.5
Isdn Channel SuConnId.
OBJECT-TYPE    
  INTEGER 1..65535  

isdnMgmntGroup 1.3.6.1.4.1.4618.1.2.2.2.4
OBJECT IDENTIFIER    

isdnTrnkMgmntTable 1.3.6.1.4.1.4618.1.2.2.2.4.1
ISDN Trunk Management Table. The Management Commands for ISDN Trunk(s) in MSSC are provided in this table. This table has the index isdnTrnkMgmntId (Integer).
OBJECT-TYPE    
  SEQUENCE OF  
    IsdnTrnkMgmntEntry

isdnTrnkMgmntEntry 1.3.6.1.4.1.4618.1.2.2.2.4.1.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  IsdnTrnkMgmntEntry  

isdnTrnkMgmntId 1.3.6.1.4.1.4618.1.2.2.2.4.1.1.1
Trunk id.
OBJECT-TYPE    
  INTEGER  

isdnTrnkMgmntCmd 1.3.6.1.4.1.4618.1.2.2.2.4.1.1.2
Management Command for Enabling/Disabling the specified trunk group. This command will make all the channels in this trunk available The possible options are : 1) Enable 2) Disable [default]
OBJECT-TYPE    
  IsdnTrnkMgtOperation  

isdnChnlMgmntTable 1.3.6.1.4.1.4618.1.2.2.2.4.2
ISDN Trunk Channel Management Table. The Management Commands for ISDN Trunk(s) in MSSC are provided in this table. This table has the index isdnTrunkMgmntId (Integer).
OBJECT-TYPE    
  SEQUENCE OF  
    IsdnChnlMgmntEntry

isdnChnlMgmntEntry 1.3.6.1.4.1.4618.1.2.2.2.4.2.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  IsdnChnlMgmntEntry  

isdnTrunkMgmntId 1.3.6.1.4.1.4618.1.2.2.2.4.2.1.1
Trunk id.
OBJECT-TYPE    
  INTEGER  

isdnChnlMgmntId 1.3.6.1.4.1.4618.1.2.2.2.4.2.1.2
Channel id.
OBJECT-TYPE    
  INTEGER  

isdnChnlMgmntCmd 1.3.6.1.4.1.4618.1.2.2.2.4.2.1.3
Management Command for Enabling/Disabling the specified Channel in the specified trunk. The possible options are : 1) Enable 2) Disable [default]
OBJECT-TYPE    
  IsdnChnlMgtOperation  

mfdMgmntTable 1.3.6.1.4.1.4618.1.2.2.2.4.3
Modem Fault Management Table. The Management Commands for Modem(s) in MSSC are provided in this table. This table has the index isdnTnkMgmntId (Integer).
OBJECT-TYPE    
  SEQUENCE OF  
    MfdMgmntEntry

mfdMgmntEntry 1.3.6.1.4.1.4618.1.2.2.2.4.3.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  MfdMgmntEntry  

isdnTnkMgmntId 1.3.6.1.4.1.4618.1.2.2.2.4.3.1.1
Isdn Trunk id.
OBJECT-TYPE    
  INTEGER  

isdnDurThreshold 1.3.6.1.4.1.4618.1.2.2.2.4.3.1.2
Bad Call Duration Threshold. A value 0 means disable. If mfd is enabled the normal value for this field would be 3
OBJECT-TYPE    
  INTEGER 1..65535  

isdnCntThreshold 1.3.6.1.4.1.4618.1.2.2.2.4.3.1.3
Bad Call Count Threshold A value 0 means disable. If mfd is enabled the normal value for this field would be 3
OBJECT-TYPE    
  INTEGER 1..65535  

mfdMgmntCmd 1.3.6.1.4.1.4618.1.2.2.2.4.3.1.4
Management Command for Enabling/Disabling 'MODEM FAULT DETECTION' feature in MSSC. The possible options are : 1) Enable 2) Disable [default]
OBJECT-TYPE    
  EnableOperation  

trnkGrp 1.3.6.1.4.1.4618.1.2.2.3
OBJECT IDENTIFIER    

trunkGrpCfgTable 1.3.6.1.4.1.4618.1.2.2.3.1
SS7/ISDN Trunk Group Table. The Information about Trunk Groups in MSSC are provided in this table. This table has the index trunkGrpId (Integer).
OBJECT-TYPE    
  SEQUENCE OF  
    TrunkGrpCfgEntry

trunkGrpCfgEntry 1.3.6.1.4.1.4618.1.2.2.3.1.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  TrunkGrpCfgEntry  

trunkGrpId 1.3.6.1.4.1.4618.1.2.2.3.1.1.1
Denotes Id for this trunk group. Range for Id is 1-65535.
OBJECT-TYPE    
  INTEGER 1..65535  

trunkGrpName 1.3.6.1.4.1.4618.1.2.2.3.1.1.2
Denotes Name of this trunk group. The Name is a string of length 8. The first two characters of Name have to be alphabhets. The next 6 charecters are numeric. An example a valid Trunk Group Name is ab123456. NOTE: This format needs to be strictly foll
OBJECT-TYPE    
  DisplayString SIZE(1..8)  

trunkGrpCarrierId 1.3.6.1.4.1.4618.1.2.2.3.1.1.3
Denotes Carrier id for this trunk group. The Carrier id Field is an integer of length 4. An example for Carried Id is: 1234 NOTE: The format for sertting the Carrier Id needs to strictly followed. Failure to follow this format will result in unsucces
OBJECT-TYPE    
  INTEGER 0..65535  

trunkGrpType 1.3.6.1.4.1.4618.1.2.2.3.1.1.4
Denotes Trunk group type. Possible values for Trunk group are: 1. ss7 2. isdn
OBJECT-TYPE    
  TrnkGrpType  

trunkGrpRoffName 1.3.6.1.4.1.4618.1.2.2.3.1.1.5
Denotes Remote Office Name: NOTE: Value for this object is NOT Valid if TrunkGrpType is ISDN. Only Valid For SS7 TrunkGroup. If trunkGrpType is ISDN and the USER sets the value for Remote Office Name, then this Remote Office Name will be ignored when
OBJECT-TYPE    
  NameString  

trunkGrpRoffType 1.3.6.1.4.1.4618.1.2.2.3.1.1.6
Denotes Remote Office Type: NOTE: Value for this object is NOT Valid if TrunkGrpType is ISDN. Remote Office Type is only Valid For SS7 TrunkGroup.If trunkGrpType is ISDN and the USER sets the value for Remote Office Type, then this value is ignored w
OBJECT-TYPE    
  RoffType  

trunkGrpCdrFlag 1.3.6.1.4.1.4618.1.2.2.3.1.1.7
Denotes Cdr Flag : Possible values are: 0) noCdr -> default (No CDR file is required) 1) IC -> for Incoming calls 2) OG -> for Outgoing calls 3) BI -> for both the Incoming and outgoing calls
OBJECT-TYPE    
  CdrFlag  

trunkGrpNoOfTrunks 1.3.6.1.4.1.4618.1.2.2.3.1.1.8
Denotes the Number Of Trunks that are contained in this trunk Group
OBJECT-TYPE    
  INTEGER 0..65535  

trunkGrpVoicePcm 1.3.6.1.4.1.4618.1.2.2.3.1.1.9
OBJECT-TYPE    
  VoicePcm  

trunkGrpRowStatus 1.3.6.1.4.1.4618.1.2.2.3.1.1.10
Current Status (configurational Status) of this Trunk Group. To Configure this Link, the only option is 'CREATEANDWAIT' To Delete this Link, the only option is 'DESTROY' For the 'GET' Operation, the possible options are 1) active 2) notinservice 3)
OBJECT-TYPE    
  RowStatus  

trunkGrpOpStatus 1.3.6.1.4.1.4618.1.2.2.3.1.1.11
Current Status (Operational Status) of this Trunk Group. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down
OBJECT-TYPE    
  OpStatus  

rt 1.3.6.1.4.1.4618.1.2.2.4
OBJECT IDENTIFIER    

routeTable 1.3.6.1.4.1.4618.1.2.2.4.1
Route Table. Information about the Route(s) in MSSC are provided in this table. The index of this table is routeId (Integer)
OBJECT-TYPE    
  SEQUENCE OF  
    RouteEntry

routeEntry 1.3.6.1.4.1.4618.1.2.2.4.1.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  RouteEntry  

routeId 1.3.6.1.4.1.4618.1.2.2.4.1.1.1
Route Group id. Can be any integer 1-65535.
OBJECT-TYPE    
  INTEGER 1..65535  

routeAddrType 1.3.6.1.4.1.4618.1.2.2.4.1.1.2
Call Control routing type The possible option are: 1) Call party number 2) Transit Network Selection
OBJECT-TYPE    
  AddrType  

routeAdrId 1.3.6.1.4.1.4618.1.2.2.4.1.1.3
Call Control route request nature of address. The possible options are: 1) National number 2) International number 3) Unknown
OBJECT-TYPE    
  AddrIdentifier  

routeAddr 1.3.6.1.4.1.4618.1.2.2.4.1.1.4
Call Control routing number
OBJECT-TYPE    
  AddrString  

routeNumPlan 1.3.6.1.4.1.4618.1.2.2.4.1.1.5
Call control route request numbering plan. The possible options are: 1) Number not present(nonumber) 2) ISDN numbering Plan(isdnnumplan) 3) Telephony numbering plan(telephonynumplan) 4) Private Numbering Plan(privatenumplan)
OBJECT-TYPE    
  NumPlan  

routeNumOfDigit 1.3.6.1.4.1.4618.1.2.2.4.1.1.6
Number of Digit in the route.
OBJECT-TYPE    
  INTEGER 1..65535  

routeRouteName 1.3.6.1.4.1.4618.1.2.2.4.1.1.7
Route Name. Can be any combination of alphanumeric characters. Spaces are not allowed.
OBJECT-TYPE    
  NameString  

routeRouteType 1.3.6.1.4.1.4618.1.2.2.4.1.1.8
Route type: SS7/ISDN
OBJECT-TYPE    
  RouteType  

routeRowStatus 1.3.6.1.4.1.4618.1.2.2.4.1.1.9
Current Status (configurational Status) of this ROUTE. To Configure this Route, the only option is 'CREATEANDWAIT' To Delete this Route, the only option is 'DESTROY' For the 'GET' Operation, the possible options are 1) active 2) notinservice 3) notr
OBJECT-TYPE    
  RowStatus  

routeOpStatus 1.3.6.1.4.1.4618.1.2.2.4.1.1.10
Current Status (Operational Status) of this Route. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down
OBJECT-TYPE    
  OpStatus  

rtEntryIsdnCfgTable 1.3.6.1.4.1.4618.1.2.2.4.2
RtEntry Isdn Table. Information about the RtEntry(s) in MSSC are provided in this table.The Table has two indices: rtEntryIsdnGrpId and rtEntryIsdntrunkId (both Integer).
OBJECT-TYPE    
  SEQUENCE OF  
    RtEntryIsdnCfgEntry

rtEntryIsdnCfgEntry 1.3.6.1.4.1.4618.1.2.2.4.2.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  RtEntryIsdnCfgEntry  

rtEntryIsdnGrpId 1.3.6.1.4.1.4618.1.2.2.4.2.1.1
Route ISDN group id. Can be any integer 1-65535.
OBJECT-TYPE    
  INTEGER 1..65535  

rtEntryIsdntrunkId 1.3.6.1.4.1.4618.1.2.2.4.2.1.2
Route ISDN Trunk id. Can be any integer 1-256.
OBJECT-TYPE    
  INTEGER 1..256  

rtEntryIsdnRouteName 1.3.6.1.4.1.4618.1.2.2.4.2.1.3
Route ISDN group name. Can be any combination of alphanumeric characters. Spaces are not allowed and cannot exceed 15 characters.
OBJECT-TYPE    
  NameString  

rtEntryIsdnRowStatus 1.3.6.1.4.1.4618.1.2.2.4.2.1.4
Current Status (configurational Status) of this ISDN ROUTE Entry. To Configure this Link, the only option is 'CREATEANDWAIT' To Delete this Link, the only option is 'DESTROY' For the 'GET' Operation, the possible options are 1) active 2) notinservice
OBJECT-TYPE    
  RowStatus  

rtEntryIsdnOpStatus 1.3.6.1.4.1.4618.1.2.2.4.2.1.5
Current Status (Operational Status) of this ISDN Route. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down
OBJECT-TYPE    
  OpStatus  

rtEntrySs7CfgTable 1.3.6.1.4.1.4618.1.2.2.4.3
RtEntry SS7 Table. Information about the RtEntry(s) in MSSC are provided in this table.The Table has two indices: rtEntrySs7GrpId and rtEntrySs7CmbLinksetId (both Integer).
OBJECT-TYPE    
  SEQUENCE OF  
    RtEntrySs7CfgEntry

rtEntrySs7CfgEntry 1.3.6.1.4.1.4618.1.2.2.4.3.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  RtEntrySs7CfgEntry  

rtEntrySs7GrpId 1.3.6.1.4.1.4618.1.2.2.4.3.1.1
Route SS7 group id. Can be any integer 1-65535.
OBJECT-TYPE    
  INTEGER 1..65535  

rtEntrySs7CmbLinksetId 1.3.6.1.4.1.4618.1.2.2.4.3.1.2
SS7 Linkset Id which is already configured so far. An incorrect Linkset Id will result a failure at the time of 'CREATION' of the RtEntry ie, addition of the Destination Point Code into the specified Route will fail.
OBJECT-TYPE    
  INTEGER 1..65535  

rtEntrySs7RouteName 1.3.6.1.4.1.4618.1.2.2.4.3.1.3
Route SS7 group name. Can be any combination of alphanumeric characters Spaces are not allowed and cannot exceed 15 characters.
OBJECT-TYPE    
  NameString  

rtEntrySs7Dpc 1.3.6.1.4.1.4618.1.2.2.4.3.1.4
Route SS7 Destination Point Code (The Integer Value). The Point Code should be converted into its Integer equivalent. For Example: 0-1-1 is converted as 257 (for ANSI) 0-1-2 is converted as 10 (for ITU)
OBJECT-TYPE    
  INTEGER 1..16777215  

rtEntrySs7Mode 1.3.6.1.4.1.4618.1.2.2.4.3.1.5
Route SS7 Type(ANSI/ITU)
OBJECT-TYPE    
  Standard  

rtEntrySs7RowStatus 1.3.6.1.4.1.4618.1.2.2.4.3.1.6
Current Status (configurational Status) of this SS7 Route Entry. To Configure this Link, the only option is 'CREATEANDWAIT' To Delete this Link, the only option is 'DESTROY' For the 'GET' Operation, the possible options are 1) active 2) notinservice
OBJECT-TYPE    
  RowStatus  

rtEntrySs7OpStatus 1.3.6.1.4.1.4618.1.2.2.4.3.1.7
Current Status (Operational Status) of this SS7 Route. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down
OBJECT-TYPE    
  OpStatus  

routeMgmntCmdGroup 1.3.6.1.4.1.4618.1.2.2.4.4
OBJECT IDENTIFIER    

digitStripMgmntTable 1.3.6.1.4.1.4618.1.2.2.4.4.1
Route Management Command Table. Commands for enabling or disabling digit stripping in MSSC's routing feature are applied here. The index for this table is rtName(String).
OBJECT-TYPE    
  SEQUENCE OF  
    DigitStripMgmntEntry

digitStripMgmntEntry 1.3.6.1.4.1.4618.1.2.2.4.4.1.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  DigitStripMgmntEntry  

rtName 1.3.6.1.4.1.4618.1.2.2.4.4.1.1.1
Route Name. Can be any combination of alphanumeric characters. Spaces are not allowed.
OBJECT-TYPE    
  NameString  

rtAddrType 1.3.6.1.4.1.4618.1.2.2.4.4.1.1.2
Call Control route request nature of address. The possible options are: 1) National number 2) International number 3) Unknown
OBJECT-TYPE    
  AddrIdentifier  

rtNumOfDigit 1.3.6.1.4.1.4618.1.2.2.4.4.1.1.3
Number of Digit in the route.
OBJECT-TYPE    
  INTEGER 1..65535  

rtMgmntCmd 1.3.6.1.4.1.4618.1.2.2.4.4.1.1.4
Management Command for Enabling/Disabling Digit Strip for MSSC's Routing Feature. The possible options are : 1) Enable 2) Disable [default]
OBJECT-TYPE    
  EnableOperation  

isdnLoadBalanceMgmntTable 1.3.6.1.4.1.4618.1.2.2.4.4.2
Isdn Channel Load Balance Command Table. Turning this feature on will result in distributing all the incoming calls evenly in all the trunks for the specified route number. The index for this table is rteName(String).
OBJECT-TYPE    
  SEQUENCE OF  
    IsdnLoadBalanceMgmntEntry

isdnLoadBalanceMgmntEntry 1.3.6.1.4.1.4618.1.2.2.4.4.2.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  IsdnLoadBalanceMgmntEntry  

rteName 1.3.6.1.4.1.4618.1.2.2.4.4.2.1.1
Route Name. Can be any combination of alphanumeric characters. Spaces are not allowed.
OBJECT-TYPE    
  NameString  

ilbMgmntCmd 1.3.6.1.4.1.4618.1.2.2.4.4.2.1.2
Management Command for Enabling/Disabling the feature 'ISDN Channel LOAD BALANCE'. When this feature is turned on all the incoming calls are distributed evenly in all the trunks for the specified routing numbers. The possible options are : 1) Enable
OBJECT-TYPE    
  EnableOperation  

xconnect 1.3.6.1.4.1.4618.1.2.2.5
OBJECT IDENTIFIER    

xconnectCfgTable 1.3.6.1.4.1.4618.1.2.2.5.1
XConnext Table. Information about XConnect(s) in MSSC are provided in this table. The index for this table is xconnectId(Integer).
OBJECT-TYPE    
  SEQUENCE OF  
    XconnectCfgEntry

xconnectCfgEntry 1.3.6.1.4.1.4618.1.2.2.5.1.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  XconnectCfgEntry  

xconnectId 1.3.6.1.4.1.4618.1.2.2.5.1.1.1
Xconnect id. Can be any integer 1-65535.
OBJECT-TYPE    
  INTEGER 1..65535  

xconnectName 1.3.6.1.4.1.4618.1.2.2.5.1.1.2
Xconnect name. Can be any combination of alphanumeric characters. Spaces are not allowed and cannot exceed 15 characters.
OBJECT-TYPE    
  NameString  

xconnectIPAddr 1.3.6.1.4.1.4618.1.2.2.5.1.1.3
Xconnect IP address. Submit in xxx.xxx.xxx.xxx format.
OBJECT-TYPE    
  IpAddress  

xconnectTCPPort 1.3.6.1.4.1.4618.1.2.2.5.1.1.4
Xconnect TCP port. Can be any integer 1-65535.
OBJECT-TYPE    
  INTEGER 1..65535  

xconnectRowStatus 1.3.6.1.4.1.4618.1.2.2.5.1.1.5
Current Status (configurational Status) of this XConnect. To Configure this Link, the only option is 'CREATEANDWAIT' To Delete this Link, the only option is 'DESTROY' For the 'GET' Operation, the possible options are 1) active 2) notinservice 3) not
OBJECT-TYPE    
  RowStatus  

xconnectOpStatus 1.3.6.1.4.1.4618.1.2.2.5.1.1.6
Current Status (Operational Status) of this XConnect. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down
OBJECT-TYPE    
  OpStatus  

xlinkCfgTable 1.3.6.1.4.1.4618.1.2.2.5.2
XLink Table. Information about XLink(s) in MSSC are provided in this table.This table has six indices: xconnectIdEndA, slotIdEndA, portIdEndA,xconnectIdEndB, xconnectIdEndB,slotIdEndB,portIdEndB (all Integers)
OBJECT-TYPE    
  SEQUENCE OF  
    XlinkCfgEntry

xlinkCfgEntry 1.3.6.1.4.1.4618.1.2.2.5.2.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  XlinkCfgEntry  

xconnectIdEndA 1.3.6.1.4.1.4618.1.2.2.5.2.1.1
Xconnect id for one end. Can be any integer 1-65535.
OBJECT-TYPE    
  INTEGER 1..65535  

slotIdEndA 1.3.6.1.4.1.4618.1.2.2.5.2.1.2
Slot Id of one end.
OBJECT-TYPE    
  INTEGER 1..65535  

portIdEndA 1.3.6.1.4.1.4618.1.2.2.5.2.1.3
Port id of one end.
OBJECT-TYPE    
  INTEGER 1..65535  

xconnectIdEndB 1.3.6.1.4.1.4618.1.2.2.5.2.1.4
Xconnect id for the other end. Can be any integer 1-65535.
OBJECT-TYPE    
  INTEGER 1..65535  

slotIdEndB 1.3.6.1.4.1.4618.1.2.2.5.2.1.5
Slot Id of the other end.
OBJECT-TYPE    
  INTEGER 1..65535  

portIdEndB 1.3.6.1.4.1.4618.1.2.2.5.2.1.6
Port id of the other end.
OBJECT-TYPE    
  INTEGER 1..65535  

xlinkConnectionType 1.3.6.1.4.1.4618.1.2.2.5.2.1.7
Connection Type between the Xconnects The possible options are : 1) Unchannelised DS3 (ut3) 2) Channelised DS3 (t3)
OBJECT-TYPE    
  ConnectionType  

xlinkRowStatus 1.3.6.1.4.1.4618.1.2.2.5.2.1.8
Current Status (configurational Status) of this XCONNECT Link. To Configure this Link, the only option is 'CREATEANDWAIT' To Delete this Link, the only option is 'DESTROY' For the 'GET' Operation, the possible options are 1) active 2) notinservice 3
OBJECT-TYPE    
  RowStatus  

xlinkOpStatus 1.3.6.1.4.1.4618.1.2.2.5.2.1.9
Current Status (Operational Status) of this XConnect Link. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down
OBJECT-TYPE    
  OpStatus  

xlinkMgmntTable 1.3.6.1.4.1.4618.1.2.2.5.3
XLink Management Table. This table has six indices: xconnectIdEndA, slotIdEndA, portIdEndA,xconnectIdEndB, xconnectIdEndB,slotIdEndB,portIdEndB (all Integers)
OBJECT-TYPE    
  SEQUENCE OF  
    XlinkMgmntEntry

xlinkMgmntEntry 1.3.6.1.4.1.4618.1.2.2.5.3.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  XlinkMgmntEntry  

xconnIdEndA 1.3.6.1.4.1.4618.1.2.2.5.3.1.1
Xconnect id for one end. Can be any integer 1-65535.
OBJECT-TYPE    
  INTEGER 1..65535  

xconnSlotIdEndA 1.3.6.1.4.1.4618.1.2.2.5.3.1.2
Slot Id of one end.
OBJECT-TYPE    
  INTEGER 1..65535  

xconnPortIdEndA 1.3.6.1.4.1.4618.1.2.2.5.3.1.3
Port id of one end.
OBJECT-TYPE    
  INTEGER 1..65535  

xconnIdEndB 1.3.6.1.4.1.4618.1.2.2.5.3.1.4
Xconnect id for the other end. Can be any integer 1-65535.
OBJECT-TYPE    
  INTEGER 1..65535  

xconnSlotIdEndB 1.3.6.1.4.1.4618.1.2.2.5.3.1.5
Slot Id of the other end.
OBJECT-TYPE    
  INTEGER 1..65535  

xconnPortIdEndB 1.3.6.1.4.1.4618.1.2.2.5.3.1.6
Port id of the other end.
OBJECT-TYPE    
  INTEGER  

xlinkMgmntCmd 1.3.6.1.4.1.4618.1.2.2.5.3.1.7
Management Command for Enabling/Disabling XLink The possible options are : 1) Enable 2) Disable [default]
OBJECT-TYPE    
  EnableOperation  

enableGroup 1.3.6.1.4.1.4618.1.2.2.6
OBJECT IDENTIFIER    

enableSwitch 1.3.6.1.4.1.4618.1.2.2.6.1
This is POST-CONFIGURATION command to ENABLE the switch. The 'GET' operation will result in the default value (no) being returned. The possible options are: 1) yes 2) no (Default)
OBJECT-TYPE    
  EnableStatus  

enableSS7Route 1.3.6.1.4.1.4618.1.2.2.6.2
This is POST-CONFIGURATION command to ENABLE the SS7 Route. The 'GET' operation will result in the default value (no) being returned. The possible options are: 1) yes 2) no (Default)
OBJECT-TYPE    
  EnableStatus  

enableSS7Ckt 1.3.6.1.4.1.4618.1.2.2.6.3
This is POST-CONFIGURATION command to ENABLE the SS7 Circuit. This Command can only be applied to Enable the SS7 Circuit and COMMIT all the SS7 Circuit Configuration. The 'GET' operation will result in the default value (no) being returned. The possib
OBJECT-TYPE    
  EnableStatus  

enableIsdntrunk 1.3.6.1.4.1.4618.1.2.2.6.4
This is POST-CONFIGURATION command to ENABLE the ISDN Trunk. This Command can only be applied to Enable the ISDN Trunk. The 'GET' operation will result in the default value (no) being returned. The possible options are: 1) yes 2) no (Default)
OBJECT-TYPE    
  EnableStatus  

enableXconnect 1.3.6.1.4.1.4618.1.2.2.6.5
This is POST-CONFIGURATION command to ENABLE the Xconnect. The 'GET' operation will result in the default value (no) being returned. The possible options are: 1) yes 2) no (Default)
OBJECT-TYPE    
  EnableStatus  

enableRoute 1.3.6.1.4.1.4618.1.2.2.6.6
This is POST-CONFIGURATION command to ENABLE the ROUTE and COMMIT all the configuration set for MTP2. This Command can only be applied to Enable the XConnect. The 'GET' operation will result in the default value (no) being returned. The possible optio
OBJECT-TYPE    
  EnableStatus  

switchMeas 1.3.6.1.4.1.4618.1.2.3
OBJECT IDENTIFIER    

measFile 1.3.6.1.4.1.4618.1.2.3.1
OBJECT IDENTIFIER    

measFileInfo 1.3.6.1.4.1.4618.1.2.3.1.1
OBJECT IDENTIFIER    

measFileAcknowledge 1.3.6.1.4.1.4618.1.2.3.1.1.1
Acknowledgement of the receiving of the specified Measurement file
OBJECT-TYPE    
  DisplayString SIZE(1..255)  

measFileConfig 1.3.6.1.4.1.4618.1.2.3.1.2
OBJECT IDENTIFIER    

measFileCfgMeasInterval 1.3.6.1.4.1.4618.1.2.3.1.2.1
Switch Config Measure Interval. The duration of the collection window (frequency of persisting collected measurements). Default: 15 minutes. Valid Values: 15, 30, 60 minutes. 0 for Disable.
OBJECT-TYPE    
  INTEGER 0..60  

measFileCfgUsagescanInterval 1.3.6.1.4.1.4618.1.2.3.1.2.2
Switch Config Usage Scan Interval. The interval between scanning the trunk for usage counts. Default: 15 seconds Valid Values: 5 through 300 seconds.
OBJECT-TYPE    
  INTEGER 5..300  

measFileCfgPurgeDay 1.3.6.1.4.1.4618.1.2.3.1.2.3
File Config Purge Day. After The specified no of days the file in secondary directory are purged if Measurement File Auto Purge Flag is on.
OBJECT-TYPE    
  INTEGER 0..30  

measFileCfgPurgeFlag 1.3.6.1.4.1.4618.1.2.3.1.2.4
File Config Flag. This is an auto purge flag.
OBJECT-TYPE    
  MeasPurgeFlag  

measFileCfgPrimaryDir 1.3.6.1.4.1.4618.1.2.3.1.2.5
Measurement File Primary Dir. Measurement file is written in this directory
OBJECT-TYPE    
  DisplayString  

measFileCfgSecondaryDir 1.3.6.1.4.1.4618.1.2.3.1.2.6
Measurement File Secondary Dir. Measurement file is moved to this directory from Primary Directory after receving the acknowledgement.
OBJECT-TYPE    
  DisplayString  

measFileEnableGrp 1.3.6.1.4.1.4618.1.2.3.1.3
OBJECT IDENTIFIER    

measFileEnablePRITraffic 1.3.6.1.4.1.4618.1.2.3.1.3.1
Measurement File PRI Traffic Enable Group. A mechanism for the user to enable collecting of PRI Traffic measurement data.
OBJECT-TYPE    
  MeasEnableStatus  

measFileEnableISUPTraffic 1.3.6.1.4.1.4618.1.2.3.1.3.2
Measurement File ISUP Traffic Enable Group. A mechanism for the user to enable collecting of ISUP Traffic measurement data.
OBJECT-TYPE    
  MeasEnableStatus  

measFileEnablePRIIneffectiveCall 1.3.6.1.4.1.4618.1.2.3.1.3.3
Measurement File Enable PRI Ineffective Call Group. A mechanism for the user to enable collecting of PRI Ineffective Call Group measurement data.
OBJECT-TYPE    
  MeasEnableStatus  

measFileEnableISUPIneffectiveCall 1.3.6.1.4.1.4618.1.2.3.1.3.4
Measurement File Enable PRI Ineffective Call Group. A mechanism for the user to enable collecting of ISUP Ineffective Call Group Traffic measurement data.
OBJECT-TYPE    
  MeasEnableStatus  

measFileEnableTrunkGrp 1.3.6.1.4.1.4618.1.2.3.1.3.5
Measurement File Enable Trunk Group. A mechanism for the user to enable collecting of Trunk Group Traffic measurement data.
OBJECT-TYPE    
  MeasEnableStatus  

measFileEnableSS7LinkTraffic 1.3.6.1.4.1.4618.1.2.3.1.3.6
Measurement File Enable SS7 Link Traffic Group. A mechanism for the user to enable collecting of SS7 Link Traffic measurement data.
OBJECT-TYPE    
  MeasEnableStatus  

measSwitch 1.3.6.1.4.1.4618.1.2.3.2
OBJECT IDENTIFIER    

measSwitchIsupGrp 1.3.6.1.4.1.4618.1.2.3.2.1
OBJECT IDENTIFIER    

measSwitchIsupDataSuspect 1.3.6.1.4.1.4618.1.2.3.2.1.1
Switch Isup Data Suspect. Boolean value indicating if the measurement data set is suspect. Suspect data is that which may or may not be accurate and cannot be verified accurate due to a some condition that occurred during the collection interval
OBJECT-TYPE    
  Counter  

measSwitchIsupIncomingAnsiTrunkCallAttempts 1.3.6.1.4.1.4618.1.2.3.2.1.2
Switch Isup Incoming Ansi Trunk Call Attempts. The number of incoming ISUP-ANSI trunk call requests.
OBJECT-TYPE    
  Counter  

measSwitchIsupIncomingAnsiTrunkCallAnswered 1.3.6.1.4.1.4618.1.2.3.2.1.3
Switch Isup Incoming Ansi Trunk Call Answered. The number of incoming ISUP-ANSI trunk calls answered.
OBJECT-TYPE    
  Counter  

measSwitchIsupOutgoingAnsiTrunkCallAttempts 1.3.6.1.4.1.4618.1.2.3.2.1.4
Switch Isup Outgoing Ansi Trunk Call Attempts. The number of outgoing ISUP-ANSi trunk call requests.
OBJECT-TYPE    
  Counter  

measSwitchIsupOutgoingAnsiTrunkCallAnswered 1.3.6.1.4.1.4618.1.2.3.2.1.5
Switch Isup Outgoing Ansi Trunk Call Answered. The number of outgoing ISUP-ANSI trunk calls answered.
OBJECT-TYPE    
  Counter  

measSwitchIsupIncomingItutTrunkCallAttempts 1.3.6.1.4.1.4618.1.2.3.2.1.6
Switch Isup Incoming Itut Trunk Call Attempts. The number of incoming ISUP-ITUT trunk call requests.
OBJECT-TYPE    
  Counter  

measSwitchIsupIncomingItutTrunkCallAnswered 1.3.6.1.4.1.4618.1.2.3.2.1.7
Switch Isup Incoming Itut Trunk Call Answered. The number of incoming ISUP-ITUT trunk calls answered.
OBJECT-TYPE    
  Counter  

measSwitchIsupOutgoingItutTrunkCallAttempts 1.3.6.1.4.1.4618.1.2.3.2.1.8
Switch Isup Outgoing Itut Trunk Call Attempts. The number of outgoing ISUP-ITUT trunk call requests.
OBJECT-TYPE    
  Counter  

measSwitchIsupOutgoingItutTrunkCallAnswered 1.3.6.1.4.1.4618.1.2.3.2.1.9
Switch Isup Outgoing Itut Trunk Call Answered. The number of outgoing ISUP-ITUT trunk calls answered.
OBJECT-TYPE    
  Counter  

measSwitchIsupFailCallGrp 1.3.6.1.4.1.4618.1.2.3.2.2
OBJECT IDENTIFIER    

measSwitchIsupFailCallDataSuspect 1.3.6.1.4.1.4618.1.2.3.2.2.1
Switch Isup Fail Call Data Suspect. Boolean value indicating if the measurement data set is suspect. Suspect data is that which may or may not be accurate and cannot be verified accurate due to a some condition that occurred during the collection inte
OBJECT-TYPE    
  Counter  

measSwitchIsupFailCallAnsiMatchingLoss 1.3.6.1.4.1.4618.1.2.3.2.2.2
Switch Isup Fail Call Ansi Matching Loss. The number of calls ISUP-ANSI trunk calls that fail to find a linked cross-connect within XCMs on any stage of the call.
OBJECT-TYPE    
  Counter  

measSwitchIsupFailCallAnsiNoCircuit 1.3.6.1.4.1.4618.1.2.3.2.2.3
Switch Isup Fail Call Ansi No Circuit. The number of ISUP-ANSI calls that cannot forwarded on a trunk because: * No idle PRI trunks available * No cross-connect available between XCMs.
OBJECT-TYPE    
  Counter  

measSwitchIsupFailCallAnsiCalledPartyLineBusy 1.3.6.1.4.1.4618.1.2.3.2.2.4
Switch Isup Fail Call Ansi Called Party Line Busy. The number of ISUP-ANSI calls that result in a called party busy indication returned to the caller.
OBJECT-TYPE    
  Counter  

measSwitchIsupFailCallAnsiIneffectiveMachineAttempts 1.3.6.1.4.1.4618.1.2.3.2.2.5
Switch Isup Fail Call Ansi Ineffective Machine Attempts. The number of ISUP-ANSI call ineffective machine attempts that have not been associated with any of the following: * Matching loss * No circuit * Called party line busy.
OBJECT-TYPE    
  Counter  

measSwitchIsupFailCallItutMatchingLoss 1.3.6.1.4.1.4618.1.2.3.2.2.6
Switch Isup Fail Call Itut Matching Loss. The number of calls ISUP-ITUT trunk calls that fail to find a linked cross-connect within XCMs on any stage of the call.
OBJECT-TYPE    
  Counter  

measSwitchIsupFailCallItutNoCircuit 1.3.6.1.4.1.4618.1.2.3.2.2.7
Switch Isup Fail Call Itut No Circuit. The number of ISUP-ITUT calls that cannot be forwarded on a trunk because: * No idle PRI trunks available * No cross-connect available between XCMs.
OBJECT-TYPE    
  Counter  

measSwitchIsupFailCallItutCalledPartyLineBusy 1.3.6.1.4.1.4618.1.2.3.2.2.8
Switch Isup Fail Call Itut Called Party Line Busy. The number of ISUP-ITUT calls that result in a called party busy indication returned to the caller.
OBJECT-TYPE    
  Counter  

measSwitchIsupFailCallItutIneffectiveMachineAttempts 1.3.6.1.4.1.4618.1.2.3.2.2.9
Switch Isup Fail Call Itut Ineffective Machine Attempts. The number of ISUP-ITUT call ineffective machine attempts that have not been associated with any of the following: * Matching loss * No circuit * Called party line busy.
OBJECT-TYPE    
  Counter  

measSwitchPriGrp 1.3.6.1.4.1.4618.1.2.3.2.3
OBJECT IDENTIFIER    

measSwitchPriDataSuspect 1.3.6.1.4.1.4618.1.2.3.2.3.1
Switch Primary Data Suspect. Boolean value indicating if the measurement data set is suspect. Suspect data is that which may or may not be accurate and cannot be verified accurate due to a some condition that occurred during the collection interval.
OBJECT-TYPE    
  Counter  

measSwitchPriIncomingIsdnPRICallAttempts 1.3.6.1.4.1.4618.1.2.3.2.3.2
Switch PRI Incoming ISDN PRI Call Attempts. The number of Incoming ISDN trunk call requests.
OBJECT-TYPE    
  Counter  

measSwitchPriIncomingIsdnPRICallAnswered 1.3.6.1.4.1.4618.1.2.3.2.3.3
Switch PRI Incoming ISDN PRI Call Answered. The number of Incoming ISDN trunk calls answered.
OBJECT-TYPE    
  Counter  

measSwitchPriFailCallGrp 1.3.6.1.4.1.4618.1.2.3.2.4
OBJECT IDENTIFIER    

measSwitchPriFailCallDataSuspect 1.3.6.1.4.1.4618.1.2.3.2.4.1
Switch ISDN PRI Fail Call Data Suspect. Boolean value indicating if the measurement data set is suspect. Suspect data is that which may or may not be accurate and cannot be verified accurate due to a some condition that occurred during the collection
OBJECT-TYPE    
  Counter  

measSwitchPriFailCallMatchingLoss 1.3.6.1.4.1.4618.1.2.3.2.4.2
Switch ISDN PRI Fail Call Matching Loss. The number of calls PRI trunk calls that fail to find a linked cross-connect within XCM on any stage of the call.
OBJECT-TYPE    
  Counter  

measSwitchPriFailCallNoCircuit 1.3.6.1.4.1.4618.1.2.3.2.4.3
Switch ISDN PRI Fail Call No Circuit. The number of PRI calls that cannot be forwarded on a trunk because: * No idle PRI trunks available * No cross-connect available between XCMs.
OBJECT-TYPE    
  Counter  

measSwitchPriFailCallCalledPartyLineBusy 1.3.6.1.4.1.4618.1.2.3.2.4.4
Switch ISDN PRI Fail Call Called Party Line Busy. The number of PRI calls that result in a called party busy indication returned to the caller.
OBJECT-TYPE    
  Counter  

measSwitchPriFailCallIneffectiveMachineAttempts 1.3.6.1.4.1.4618.1.2.3.2.4.5
Switch ISDN PRI Fail Call Ineffective Machine Attempts. The number of PRI call ineffective machine attempts that have not been associated with any of the following: * Matching loss * No circuit * Called party line busy.
OBJECT-TYPE    
  Counter  

measTrnkGrp 1.3.6.1.4.1.4618.1.2.3.3
OBJECT IDENTIFIER    

measTrnkGrpTrafficTable 1.3.6.1.4.1.4618.1.2.3.3.1
Switch Measurement for Trunk Group traffic Table. Information about Trunk Group traffic measurement are provoded in this table. The index for this table is measTrnkGrpName(String).
OBJECT-TYPE    
  SEQUENCE OF  
    MeasTrnkGrpTrafficEntry

measTrnkGrpTrafficEntry 1.3.6.1.4.1.4618.1.2.3.3.1.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  MeasTrnkGrpTrafficEntry  

measTrnkGrpName 1.3.6.1.4.1.4618.1.2.3.3.1.1.1
Trunk Group Name. Can be any combination of alphanumeric characters. Spaces are not allowed and cannot exceed 15 characters.
OBJECT-TYPE    
  DisplayString  

measTrnkGrpDataSuspect 1.3.6.1.4.1.4618.1.2.3.3.1.1.2
Trunk Group Data Suspect. Boolean value indicating if the measurement data set is suspect. Suspect data is that which may or may not be accurate and cannot be verified accurate due to some condition that occurred during the collection interval.
OBJECT-TYPE    
  INTEGER  

measTrnkGrpincomingUsage 1.3.6.1.4.1.4618.1.2.3.3.1.1.3
Trunk Group Incoming Usage. The sum of the counts of the number of incoming trunks in the use.
OBJECT-TYPE    
  INTEGER  

measTrnkGrpoutgoingUsage 1.3.6.1.4.1.4618.1.2.3.3.1.1.4
Trunk Group Outgoing Usage. The sum of the counts of the number of outgoing trunks in the use.
OBJECT-TYPE    
  INTEGER  

measTrnkGrpISCicsChnls 1.3.6.1.4.1.4618.1.2.3.3.1.1.5
Trunk Group Inservice Cic/Channels. The sum of the counts of the number of Inservice circuits in case SS7 TrunkGroup or Inservice Channels in case of ISDN TRunkGroup.
OBJECT-TYPE    
  INTEGER  

measTrnkGrpOOSCicsChnls 1.3.6.1.4.1.4618.1.2.3.3.1.1.6
Trunk Group OutOfservice Cic/Channels. The sum of the counts of the number of OutOfservice circuits in case SS7 TrunkGroup or OufOfservice Channels in case of ISDN TRunkGroup.
OBJECT-TYPE    
  INTEGER  

measTrnkGrptotalUsage 1.3.6.1.4.1.4618.1.2.3.3.1.1.7
Trunk Group Total Usage. The sum of number of trunk in use by both incoming and outgoing traffic.
OBJECT-TYPE    
  INTEGER  

measTrnkGrpmaintainanceUsage 1.3.6.1.4.1.4618.1.2.3.3.1.1.8
Trunk Group Maintenance Usage. The sum of number of trunk in use for any reason other than traffic.
OBJECT-TYPE    
  INTEGER  

measLnk 1.3.6.1.4.1.4618.1.2.3.4
OBJECT IDENTIFIER    

measLinkTrafficTable 1.3.6.1.4.1.4618.1.2.3.4.1
Switch Measurement per SS7 Link traffic Table. Information about traffic measurement per SS7 Link are provoded in this table. The index for this table is measLinkName(String).
OBJECT-TYPE    
  SEQUENCE OF  
    MeasLinkTrafficEntry

measLinkTrafficEntry 1.3.6.1.4.1.4618.1.2.3.4.1.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  MeasLinkTrafficEntry  

measLinkName 1.3.6.1.4.1.4618.1.2.3.4.1.1.1
SS7 Link name
OBJECT-TYPE    
  NameString  

measLinkDataSuspect 1.3.6.1.4.1.4618.1.2.3.4.1.1.2
Link Data Suspect. Boolean value indicating if the measurement data set is suspect. Suspect data is that which may or may not be accurate and cannot be verified accurate due to some condition that occurred during the collection interval.
OBJECT-TYPE    
  INTEGER  

measLinkUnavailableDuration 1.3.6.1.4.1.4618.1.2.3.4.1.1.3
Link Unavailable Duration. The cumulative time (in sconds) that the link was unavailable during the associated time interval (CS)
OBJECT-TYPE    
  INTEGER  

measLinkInServiceDuration 1.3.6.1.4.1.4618.1.2.3.4.1.1.4
Link In Service Duration. The cumulative time (in seconds) during which the link was in the in-service state. A link is said to be in- service when it is capable of transmitting MSUs. This measurement includes periods when no MSUs are available for tra
OBJECT-TYPE    
  INTEGER  

measLinkMSUsRetransmitted 1.3.6.1.4.1.4618.1.2.3.4.1.1.5
Link MSUs Retransmitted. The number of MSUs retransmitted via a particular link during the associated time period (CS)
OBJECT-TYPE    
  INTEGER  

measLinkOctetsReceived 1.3.6.1.4.1.4618.1.2.3.4.1.1.6
Link Octers Received. The number of SIF and SIO octets received on the associate incoming link (CS)
OBJECT-TYPE    
  INTEGER  

measLinkOctectsTransmitted 1.3.6.1.4.1.4618.1.2.3.4.1.1.7
Link Octets Transmitted. The number of SIF and SIO octets transmitted (including those retransmitted) on the associated incoming link (CS)
OBJECT-TYPE    
  INTEGER  

measLinkLostMSUsBufferOverflow 1.3.6.1.4.1.4618.1.2.3.4.1.1.8
Link Lost MSUs Buffer Overflow. The number of MSUs lost because of transmission buffer overflow (CS)
OBJECT-TYPE    
  INTEGER  

measLinkMSUsDiscarded 1.3.6.1.4.1.4618.1.2.3.4.1.1.9
Link MSUs Discarded. This measurement is a count of number of MSUs discarded.
OBJECT-TYPE    
  INTEGER  

switchCdr 1.3.6.1.4.1.4618.1.2.4
OBJECT IDENTIFIER    

cdrConfig 1.3.6.1.4.1.4618.1.2.4.1
OBJECT IDENTIFIER    

cdrLongDurCallGenTime 1.3.6.1.4.1.4618.1.2.4.1.1
The Time of the day that the syatem will generate the long duration call. CDR Format ( HHMM ) Valid time of the day from 0000 - 2359
OBJECT-TYPE    
  INTEGER 0..2359  

cdrBafConfig 1.3.6.1.4.1.4618.1.2.4.2
OBJECT IDENTIFIER    

cdrAppendModule801 1.3.6.1.4.1.4618.1.2.4.2.1
Indicates if the Armillaire Proprietary Module 801 should be appended to those BAF Records. Text Format ( Not Case sensitive ) Valid values : yes, no
OBJECT-TYPE    
  Bool  

cdrSensorId 1.3.6.1.4.1.4618.1.2.4.2.2
AMA Sensor Id code of the switch. Valid values 000001-999998 for Set. If not configured then Default value is 0.
OBJECT-TYPE    
  INTEGER 1..999998  

cdrRecordingOfficeId 1.3.6.1.4.1.4618.1.2.4.2.3
AMA Record Id code of the switch. Valid values 000001-999998 For Set. If not configured then Default value is 0.
OBJECT-TYPE    
  INTEGER 1..999998  

cdrFileConfig 1.3.6.1.4.1.4618.1.2.4.3
OBJECT IDENTIFIER    

cdrFileInterval 1.3.6.1.4.1.4618.1.2.4.3.1
How often the cdr file being generated. Valid values 1-86400 seconds
OBJECT-TYPE    
  INTEGER 1..86400  

cdrFileRecLimit 1.3.6.1.4.1.4618.1.2.4.3.2
Maximum Nubler of BAF records in a CDR File. Valid values 1,677,215
OBJECT-TYPE    
  INTEGER 1..86400  

cdrFileSourceId 1.3.6.1.4.1.4618.1.2.4.3.3
This Source Component id specifies the network element for receiving of cdr files according to AMADNS. This id will be part of first node of CDR filename. Valid values 01-4095 For Set. If not configured then Default value is 0.
OBJECT-TYPE    
  INTEGER 1..4095  

cdrFileDestinationType 1.3.6.1.4.1.4618.1.2.4.3.4
This Destination Component type specifies the network element for receiving of cdr files according to AMADNS. This type will be part of second node of CDR filename. Valid values 01-15 For Set. If not configured then Default value is 0.
OBJECT-TYPE    
  INTEGER 1..15  

cdrFileDestinationId 1.3.6.1.4.1.4618.1.2.4.3.5
This Destination Component Id specifies the network element for receiving of cdr files according to AMADNS. This type will be part of second node of CDR filename. Valid values 01-4095 for Set. If not configured then Default value is 0.
OBJECT-TYPE    
  INTEGER 1..4095  

cdrFileInfo 1.3.6.1.4.1.4618.1.2.4.4
OBJECT IDENTIFIER    

cdrFileQuery 1.3.6.1.4.1.4618.1.2.4.4.1
Number of the desired CDR file. set file number to update the cdr file info.
OBJECT-TYPE    
  INTEGER  

cdrFileName 1.3.6.1.4.1.4618.1.2.4.4.2
Name of the desired CDR file. Can be any combination of alphanumeric characters. Spaces are not allowed. Filename cannot exceed 24 characters.
OBJECT-TYPE    
  DisplayString SIZE(1..24)  

cdrFileStatus 1.3.6.1.4.1.4618.1.2.4.4.3
Status of the desired CDR file
OBJECT-TYPE    
  INTEGER  

cdrFileCreateDate 1.3.6.1.4.1.4618.1.2.4.4.4
Creation date of the desired CDR file FORMAT:2000/01/26
OBJECT-TYPE    
  DisplayString SIZE(1..32)  

cdrFileCreateTime 1.3.6.1.4.1.4618.1.2.4.4.5
Creation time of the desired CDR file FORMAT: 20:12:23
OBJECT-TYPE    
  DisplayString SIZE(1..32)  

cdrFileRecordNum 1.3.6.1.4.1.4618.1.2.4.4.6
Record number of the desired CDR file
OBJECT-TYPE    
  INTEGER  

cdrFileAcknowledge 1.3.6.1.4.1.4618.1.2.4.4.7
Acknowledgement of the CDR file. The input should be the File Name.
OBJECT-TYPE    
  DisplayString SIZE(1..255)  

cdrMgmntCmdGroup 1.3.6.1.4.1.4618.1.2.4.5
OBJECT IDENTIFIER    

cdrGenMgmntCmd 1.3.6.1.4.1.4618.1.2.4.5.1
This command is used to turn on the CDR generation for the entire switch.If switch CDR generation is enabled then CDR generation can be enabled/disabled on Trunk Group. The possible options are : 1) Enable 2) Disable [default]
OBJECT-TYPE    
  EnableOperation  

cdrMngmtTrnkGrpTable 1.3.6.1.4.1.4618.1.2.4.5.2
CDR Management Command for Trunk group Table. The index for this table is cdrTrnkGrpId (integer)
OBJECT-TYPE    
  SEQUENCE OF  
    CdrMngmtTrnkGrpEntry

cdrMngmtTrnkGrpEntry 1.3.6.1.4.1.4618.1.2.4.5.2.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  CdrMngmtTrnkGrpEntry  

cdrTrnkGrpId 1.3.6.1.4.1.4618.1.2.4.5.2.1.1
The trunk Group Id.
OBJECT-TYPE    
  INTEGER 1..65535  

cdrTrnkGrpdirection 1.3.6.1.4.1.4618.1.2.4.5.2.1.2
The Direction
OBJECT-TYPE    
  CdrFlag  

cdrTrnkGrpMgmntCmd 1.3.6.1.4.1.4618.1.2.4.5.2.1.3
This command is used to turn on the CDR generation on the Trunk Group. The possible options are : 1) Enable 2) Disable [default]
OBJECT-TYPE    
  EnableOperation  

switchFeature 1.3.6.1.4.1.4618.1.2.5
OBJECT IDENTIFIER    

modemFaultDetection 1.3.6.1.4.1.4618.1.2.5.1
OBJECT IDENTIFIER    

modemStatusTable 1.3.6.1.4.1.4618.1.2.5.1.1
Faulty Modem Detection Table. This Table provides information about all the potentially faulty modems in MSSC. This table has two indices: faultModemTrnkId and faultModemChnlId (both Integer)
OBJECT-TYPE    
  SEQUENCE OF  
    ModemStatusEntry

modemStatusEntry 1.3.6.1.4.1.4618.1.2.5.1.1.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  ModemStatusEntry  

faultModemTrnkId 1.3.6.1.4.1.4618.1.2.5.1.1.1.1
The terminating Channel trunk Id.
OBJECT-TYPE    
  INTEGER  

faultModemChnlId 1.3.6.1.4.1.4618.1.2.5.1.1.1.2
The terminating Channel Channel Id.
OBJECT-TYPE    
  INTEGER  

faultModemRepnum 1.3.6.1.4.1.4618.1.2.5.1.1.1.3
Counter
OBJECT-TYPE    
  INTEGER  

faultModemReset 1.3.6.1.4.1.4618.1.2.5.1.1.1.4
The Option for Reseting the terminating Channel. A 'GET' operation on this object will display the default value [no]. The possible option for 'SET' operation is 1) YES
OBJECT-TYPE    
  ModemResetStatus  

lnp 1.3.6.1.4.1.4618.1.2.5.2
OBJECT IDENTIFIER    

lrnTable 1.3.6.1.4.1.4618.1.2.5.2.1
Local Routing Number Table. This Table provides information about Local Routing number in MSSC. This table has the index lrnId (Integer)
OBJECT-TYPE    
  SEQUENCE OF  
    LrnEntry

lrnEntry 1.3.6.1.4.1.4618.1.2.5.2.1.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  LrnEntry  

lrnNum 1.3.6.1.4.1.4618.1.2.5.2.1.1.1
The Local Routing Number (LRN) Id.
OBJECT-TYPE    
  DisplayString SIZE(1..10)  

lrnRowStatus 1.3.6.1.4.1.4618.1.2.5.2.1.1.2
The Local Routing Number (LRN) Number.
OBJECT-TYPE    
  LrnRowStatus  

switchDSP 1.3.6.1.4.1.4618.1.2.5.3
OBJECT IDENTIFIER    

switchDSPCfgTable 1.3.6.1.4.1.4618.1.2.5.3.1
OBJECT-TYPE    
  SEQUENCE OF  
    SwitchDSPCfgEntry

switchDSPCfgEntry 1.3.6.1.4.1.4618.1.2.5.3.1.1
DSP Configuration Table. This Table provides information about the DSP card(s) in MSSC. This table has two indices: switchDSPXconnId and switchDSPSlotId (both Integer)
OBJECT-TYPE    
  SwitchDSPCfgEntry  

switchDSPXconnId 1.3.6.1.4.1.4618.1.2.5.3.1.1.1
Xconnect Id for which DSP card is being configured
OBJECT-TYPE    
  INTEGER 1..65535  

switchDSPSlotId 1.3.6.1.4.1.4618.1.2.5.3.1.1.2
The Slot id at which the DSP card is being configured.
OBJECT-TYPE    
  INTEGER 1..65535  

switchDSPCardType 1.3.6.1.4.1.4618.1.2.5.3.1.1.3
The card Type. The possible options are : 1) DSP2B 2) DSP2C
OBJECT-TYPE    
  DSPCardType  

switchDSPCfgRowStatus 1.3.6.1.4.1.4618.1.2.5.3.1.1.4
Current Status (configurational Status) of this Switch DSP. To Configure this Link, the only option is 'CREATEANDWAIT' To Delete this Link, the only option is 'DESTROY' For the 'GET' Operation, the possible options are 1) active 2) notinservice 3) n
OBJECT-TYPE    
  RowStatus  

switchDSPCfgOpStatus 1.3.6.1.4.1.4618.1.2.5.3.1.1.5
Current Status (Operational Status) of this Switch DSP. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down
OBJECT-TYPE    
  OpStatus  

switchTGFeature 1.3.6.1.4.1.4618.1.2.5.4
OBJECT IDENTIFIER    

switchFeatureTGCfgTable 1.3.6.1.4.1.4618.1.2.5.4.1
Trunk Group Feature Table. This Table provides information about the Trunk Group Feature(s) in MSSC. This table has one indices: switchFeatureTGId (Integer)
OBJECT-TYPE    
  SEQUENCE OF  
    SwitchFeatureTGCfgEntry

switchTGGrpCfgEntry 1.3.6.1.4.1.4618.1.2.5.4.1.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  SwitchFeatureTGCfgEntry  

switchFeatureTGId 1.3.6.1.4.1.4618.1.2.5.4.1.1.1
Denotes Id for this trunk group.
OBJECT-TYPE    
  INTEGER  

switchFeatureTGName 1.3.6.1.4.1.4618.1.2.5.4.1.1.2
Denotes Name of this trunk group. The Name is a string of length 8. The first two characters of Name have to be an alphabhet. The next 6 characters are numeric. An example of a valid Trunk Group Name is ab123456. NOTE: This format needs to strictly fo
OBJECT-TYPE    
  NameString  

switchFeatureTGType 1.3.6.1.4.1.4618.1.2.5.4.1.1.3
Denotes Trunk group type. Possible values for Trunk group are: 1. ss7 2. isdn
OBJECT-TYPE    
  TrnkGrpType  

switchFeatureTGFeatureEC 1.3.6.1.4.1.4618.1.2.5.4.1.1.4
Denotes Echo Cancellation feature. Possible Values are: 1. Enable 2. Disable NOTE: If TrunkGrpType is ISDN, then Enabling Echo Cancellation feature is an INVALID Operation. A 'GET' Operation at this object will ALWAYS result in the default value [di
OBJECT-TYPE    
  TGFeature  

switchFeatureTGFeatureCOMPRESS 1.3.6.1.4.1.4618.1.2.5.4.1.1.5
Denotes Compression feature. Possible Values are: 1. Enable 2. Disable NOTE: if TrunkGrpType is ISDN, then Enabling Compression feature, is an INVALID Operation. A 'GET' Operation at this object will ALWAYS result in the default value [disable] bein
OBJECT-TYPE    
  TGFeature  

switchFeatureTGFeatureSS 1.3.6.1.4.1.4618.1.2.5.4.1.1.6
Denotes Silent Supression feature. Possible Values are: 1. Enable 2. Disable NOTE: If TrunkGrpType is ISDN, the Enabling Silent Supression feature, is an INVALID Operation. A 'GET' Operation at this object will ALWAYS result in the default value [di
OBJECT-TYPE    
  TGFeature  

switchFeatureTGFeatureCNIS 1.3.6.1.4.1.4618.1.2.5.4.1.1.7
Denotes Caller Number Identitication Service (CNIS) feature. Possible Values are: 1. Enable 2. Disable NOTE: If TrunkGrpType is SS7, then Enabling Caller Number Identitication Service, is an INVALID Operation. A 'GET' Operation at this object will AL
OBJECT-TYPE    
  TGFeature  

switchMaintenance 1.3.6.1.4.1.4618.1.2.6
OBJECT IDENTIFIER    

ft 1.3.6.1.4.1.4618.1.2.6.1
OBJECT IDENTIFIER    

ftSwitchOverInfo 1.3.6.1.4.1.4618.1.2.6.1.1
OBJECT IDENTIFIER    

switchOver 1.3.6.1.4.1.4618.1.2.6.1.1.1
FT Switch Over command. The possible options are 1) FT_SIG 2) FT_ICC 3) FT_ISDN 4) FT_SPHR 5) FT_LM Select any one and set that option.
OBJECT-TYPE    
  FTswitchOver  

log 1.3.6.1.4.1.4618.1.2.6.2
OBJECT IDENTIFIER    

logFileInfo 1.3.6.1.4.1.4618.1.2.6.2.1
OBJECT IDENTIFIER    

logGenTime 1.3.6.1.4.1.4618.1.2.6.2.1.1
Switch Log Generation Time. The Parameter Time-interval determines the period of generating new log files. When the time interval is reached, all the current open log files are closed and new log files are generated for future log. The unit for the ti
OBJECT-TYPE    
  INTEGER 0..120  

logPurgeTime 1.3.6.1.4.1.4618.1.2.6.2.1.2
Switch Log Deletion Time. The Parameter Time-interval determines the period of purging old log files. When the time interval is reached, all the log files older than this time-interval are deleted. The unit for the time-interval is 'minute'.
OBJECT-TYPE    
  INTEGER 0..120  

logFileGenEnable 1.3.6.1.4.1.4618.1.2.6.2.2
OBJECT IDENTIFIER    

enablelogGen 1.3.6.1.4.1.4618.1.2.6.2.2.1
This option enables the log file Generation. 1) ALARM_LOG 2) AUDIT_LOG 3) MEAS_LOG 4) DIAG_LOG 5) SCRTY_LOG 6) EVENT_LOG 7) BILL_LOG 8) EMP_LOG 9) LOG_ALL Choose any one from drop down list...
OBJECT-TYPE    
  LogFileEnDis  

disableLogGen 1.3.6.1.4.1.4618.1.2.6.2.2.2
This option disables the log file Generation. 1) ALARM_LOG 2) AUDIT_LOG 3) MEAS_LOG 4) DIAG_LOG 5) SCRTY_LOG 6) EVENT_LOG 7) BILL_LOG 8) EMP_LOG 9) LOG_ALL Choose any one from drop down list..
OBJECT-TYPE    
  LogFileEnDis  

logFileAttribute 1.3.6.1.4.1.4618.1.2.6.2.3
OBJECT IDENTIFIER    

logAttribute 1.3.6.1.4.1.4618.1.2.6.2.3.1
Allows the user to inquire about the current LOG file attributes. The possible options are : 1) ALARM_LOG 2) AUDIT_LOG 3) MEAS_LOG 4) DIAG_LOG 5) SCRTY_LOG 6) EVENT_LOG 7) BILL_LOG 8) EMP_LOG Choose any one from drop down list..
OBJECT-TYPE    
  LogFileAttr  

logFileSize 1.3.6.1.4.1.4618.1.2.6.2.3.2
OBJECT-TYPE    
  INTEGER  

logFileDuration 1.3.6.1.4.1.4618.1.2.6.2.3.3
OBJECT-TYPE    
  INTEGER  

logFileStatus 1.3.6.1.4.1.4618.1.2.6.2.3.4
OBJECT-TYPE    
  INTEGER  

trace 1.3.6.1.4.1.4618.1.2.6.3
OBJECT IDENTIFIER    

ss7LnkTrace 1.3.6.1.4.1.4618.1.2.6.3.1
OBJECT IDENTIFIER    

ss7LnkTraceTable 1.3.6.1.4.1.4618.1.2.6.3.1.1
This Table is specified for Applying Trace Function for any SS7 Link(s). The index of this table is ss7LnkId (integer)
OBJECT-TYPE    
  SEQUENCE OF  
    Ss7LnkTraceEntry

ss7LnkTraceEntry 1.3.6.1.4.1.4618.1.2.6.3.1.1.1
OBJECT-TYPE    
  Ss7LnkTraceEntry  

ss7LnkId 1.3.6.1.4.1.4618.1.2.6.3.1.1.1.1
The SS7 link Id on which the Trace Function is to be applied.
OBJECT-TYPE    
  INTEGER  

ss7LnkLog 1.3.6.1.4.1.4618.1.2.6.3.1.1.1.2
This option displays weather log Function is enabled for the specified SS7 Link.
OBJECT-TYPE    
  LogType  

ss7LnkEnable 1.3.6.1.4.1.4618.1.2.6.3.1.1.1.3
This option enables/disables the trace Function for the specified SS7 Link. The possible option are: 1) Enable 2) Disable [default]
OBJECT-TYPE    
  EnableTrace  

ss7RouteTrace 1.3.6.1.4.1.4618.1.2.6.3.2
OBJECT IDENTIFIER    

ss7RouteTraceTable 1.3.6.1.4.1.4618.1.2.6.3.2.1
This Table is specified for Applying Trace Function for any SS7 Route(s). The index of this table is ss7RouteDpc (Integer)
OBJECT-TYPE    
  SEQUENCE OF  
    Ss7RouteTraceEntry

ss7RouteTraceEntry 1.3.6.1.4.1.4618.1.2.6.3.2.1.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  Ss7RouteTraceEntry  

ss7RouteDpc 1.3.6.1.4.1.4618.1.2.6.3.2.1.1.1
The SS7 Point code. The trace Function is to be applied on this route.
OBJECT-TYPE    
  INTEGER  

ss7RouteLog 1.3.6.1.4.1.4618.1.2.6.3.2.1.1.2
This option displays weather Log Function is enabled for the specified SS7 Route.
OBJECT-TYPE    
  LogType  

ss7RouteEnable 1.3.6.1.4.1.4618.1.2.6.3.2.1.1.3
This option enables/disables the trace Functions for the specified SS7 Route. The possible option are: 1) Enable 2) Disable [default]
OBJECT-TYPE    
  EnableTrace  

isdnTrnkTrace 1.3.6.1.4.1.4618.1.2.6.3.3
OBJECT IDENTIFIER    

isdnTrunkTraceTable 1.3.6.1.4.1.4618.1.2.6.3.3.1
This Table is specified for Applying Trace Function for any ISDN Trunk(s). The index of this table is isdnTrnkId (Integer)
OBJECT-TYPE    
  SEQUENCE OF  
    IsdntrunkTraceEntry

isdnTrunkTraceEntry 1.3.6.1.4.1.4618.1.2.6.3.3.1.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  IsdntrunkTraceEntry  

isdnTrnkId 1.3.6.1.4.1.4618.1.2.6.3.3.1.1.1
The ISDN Trunk Id for which the Trace Function is to be applied.
OBJECT-TYPE    
  INTEGER  

isdnTrunkLog 1.3.6.1.4.1.4618.1.2.6.3.3.1.1.2
This option displays weather log Function is enabled for the specified ISDN Trunk.
OBJECT-TYPE    
  LogType  

isdnTrunkEnable 1.3.6.1.4.1.4618.1.2.6.3.3.1.1.3
This option enables/disables the trace Functions for the specified ISDN Trunk. The possible option are: 1) Enable 2) Disable [default]
OBJECT-TYPE    
  EnableTrace  

processStatus 1.3.6.1.4.1.4618.1.2.6.4
OBJECT IDENTIFIER    

processStatusInfo 1.3.6.1.4.1.4618.1.2.6.4.1
OBJECT IDENTIFIER    

statusLM1ProcId 1.3.6.1.4.1.4618.1.2.6.4.1.1
Indicates the current status of FT_LM: Process Id 512.
OBJECT-TYPE    
  ProcessStatus  

statusLM2ProcID 1.3.6.1.4.1.4618.1.2.6.4.1.2
Indicates the current status of FT_LM: Process Id 511.
OBJECT-TYPE    
  ProcessStatus  

statusICC1ProcId 1.3.6.1.4.1.4618.1.2.6.4.1.3
Indicates the current status of FT_ICC : Process Id 480.
OBJECT-TYPE    
  ProcessStatus  

statusICC2ProcId 1.3.6.1.4.1.4618.1.2.6.4.1.4
Indicates the current status of FT_ICC: Process Id 496.
OBJECT-TYPE    
  ProcessStatus  

statusISDN1ProcId 1.3.6.1.4.1.4618.1.2.6.4.1.5
Indicates the current status of FT_ISDN: Process Id 476.
OBJECT-TYPE    
  ProcessStatus  

statusISDN2ProcId 1.3.6.1.4.1.4618.1.2.6.4.1.6
Indicates the current status of FT_ISDN: Process Id 472.
OBJECT-TYPE    
  ProcessStatus  

statusSPHR1ProcId 1.3.6.1.4.1.4618.1.2.6.4.1.7
Indicates the current status of FT_SPHR: Process Id 448.
OBJECT-TYPE    
  ProcessStatus  

statusSPHR2ProcId 1.3.6.1.4.1.4618.1.2.6.4.1.8
Indicates the current status of FT_SPHR: Process Id 464.
OBJECT-TYPE    
  ProcessStatus  

statusSIG1ProcId 1.3.6.1.4.1.4618.1.2.6.4.1.9
Indicates the current status of FT_SIG: Process Id 384.
OBJECT-TYPE    
  ProcessStatus  

statusSIG2ProcId 1.3.6.1.4.1.4618.1.2.6.4.1.10
Indicates the current status of FT_SIG: Process Id 400.
OBJECT-TYPE    
  ProcessStatus  

statusMTP21ProcId 1.3.6.1.4.1.4618.1.2.6.4.1.11
Indicates the current status of Mtp2: Process Id 320.
OBJECT-TYPE    
  ProcessStatus  

statusMTP22ProcId 1.3.6.1.4.1.4618.1.2.6.4.1.12
Indicates the current status of Mtp2: Process Id 321.
OBJECT-TYPE    
  ProcessStatus  

statusMTP23ProcId 1.3.6.1.4.1.4618.1.2.6.4.1.13
Indicates the current status of Mtp2 : Process Id 322.
OBJECT-TYPE    
  ProcessStatus  

statusMTP24ProcId 1.3.6.1.4.1.4618.1.2.6.4.1.14
Indicates the current status of Mtp2: Process Id 323.
OBJECT-TYPE    
  ProcessStatus  

ethernetConnStatusInfo 1.3.6.1.4.1.4618.1.2.6.5
OBJECT IDENTIFIER    

ethernetConnStatus 1.3.6.1.4.1.4618.1.2.6.5.1
Current Status of the Ethernet Connection to MSSC. 'SET' Operation is NOT APPLICABLE. For the 'GET' Operation, the possible options are 1) active 2) down
OBJECT-TYPE    
  EthernetConnStatus  

audit 1.3.6.1.4.1.4618.1.2.6.6
OBJECT IDENTIFIER    

auditInfo 1.3.6.1.4.1.4618.1.2.6.6.1
OBJECT IDENTIFIER    

auditISDNTrnkTable 1.3.6.1.4.1.4618.1.2.6.6.1.1
Audit ISDN Trunk Table. This table has one index: auditTrnkId (Integer)
OBJECT-TYPE    
  SEQUENCE OF  
    AuditISDNTrnkCfgEntry

auditISDNTrnkCfgEntry 1.3.6.1.4.1.4618.1.2.6.6.1.1.1
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  AuditISDNTrnkCfgEntry  

auditTrnkId 1.3.6.1.4.1.4618.1.2.6.6.1.1.1.1
The ISDN Trunk Id on which the audit operation is being applied.
OBJECT-TYPE    
  INTEGER  

auditISDNTrnk 1.3.6.1.4.1.4618.1.2.6.6.1.1.1.2
This Object is set to Apply Audit on this particular ISDN Trunk. The possible option for 'SET' is 1) audit A 'GET' Operation on this object would result the default value 'no action' being displayed.
OBJECT-TYPE    
  AuditOperation  


auditDPCTable 1.3.6.1.4.1.4618.1.2.6.6.1.3
The Current Entry Containes all the objects for this Table. This object is not-accessible, but the user can access all the objects in this table at the next level.
OBJECT-TYPE    
  SEQUENCE OF  
    AuditDPCCfgEntry

auditDPCCfgEntry 1.3.6.1.4.1.4618.1.2.6.6.1.3.1
OBJECT-TYPE    
  AuditDPCCfgEntry  

auditPointCode 1.3.6.1.4.1.4618.1.2.6.6.1.3.1.1
The Point Code on which the audit operation is being applied.
OBJECT-TYPE    
  INTEGER  

auditPointCodeType 1.3.6.1.4.1.4618.1.2.6.6.1.3.1.2
The Point Code Type. Ansi/Itu.
OBJECT-TYPE    
  AuditType  

auditDPC 1.3.6.1.4.1.4618.1.2.6.6.1.3.1.3
This Object is set to Apply Audit on this particular DPC. The possible option for 'SET' is 1) audit A 'GET' Operation on this object would result the default value 'no action' being displayed.
OBJECT-TYPE    
  AuditOperation  

auditPeriodGrp 1.3.6.1.4.1.4618.1.2.6.6.1.4
OBJECT IDENTIFIER    

auditTimePeriod 1.3.6.1.4.1.4618.1.2.6.6.1.4.1
The Audit Period for which the audit operation is being applied.
OBJECT-TYPE    
  INTEGER 1..65535  

auditPeriod 1.3.6.1.4.1.4618.1.2.6.6.1.4.2
This Object is set to Apply Audit for this particular Period. The possible option for 'SET' is 1) audit A 'GET' Operation on this object would result the default value 'no action' being displayed.
OBJECT-TYPE    
  AuditOperation  

switchTrap 1.3.6.1.4.1.4618.1.2.7
OBJECT IDENTIFIER    

trapObjects 1.3.6.1.4.1.4618.1.2.7.1
OBJECT IDENTIFIER    

trapOpc 1.3.6.1.4.1.4618.1.2.7.1.1
Indicate the point code of the switch that send trap
OBJECT-TYPE    
  INTEGER 1..16777215  

trapXconnectId 1.3.6.1.4.1.4618.1.2.7.1.2
Indicate the id of the xconnect that send trap
OBJECT-TYPE    
  INTEGER  

trapLinkId 1.3.6.1.4.1.4618.1.2.7.1.3
Indicate the id of the link that abnormal situation
OBJECT-TYPE    
  INTEGER  

trapSlotId 1.3.6.1.4.1.4618.1.2.7.1.4
Indicate the id of the slot that has abnormal situation
OBJECT-TYPE    
  INTEGER  

trapPortId 1.3.6.1.4.1.4618.1.2.7.1.5
Indicate the id of the port that has abnormal situation
OBJECT-TYPE    
  INTEGER  

trapTrunkId 1.3.6.1.4.1.4618.1.2.7.1.6
Indicate the id of the trunk that has abnormal situation
OBJECT-TYPE    
  INTEGER  

trapInterfaceId 1.3.6.1.4.1.4618.1.2.7.1.7
Indicate the id of the interface that has abnormal situation
OBJECT-TYPE    
  INTEGER  

trapChnlId 1.3.6.1.4.1.4618.1.2.7.1.8
Indicate the id of the channel that has abnormal situation
OBJECT-TYPE    
  INTEGER  

trapDbId 1.3.6.1.4.1.4618.1.2.7.1.9
Indicate the id of the database that has abnormal situation
OBJECT-TYPE    
  INTEGER  

trapLinkName 1.3.6.1.4.1.4618.1.2.7.1.10
Indicate the name of the link that has abnormal situation
OBJECT-TYPE    
  NameString  

trapSwitchName 1.3.6.1.4.1.4618.1.2.7.1.11
Indicate the name
OBJECT-TYPE    
  DisplayString  

trapCicvalue 1.3.6.1.4.1.4618.1.2.7.1.12
Indicate Circuit Identification Code value.
OBJECT-TYPE    
  INTEGER  

trapCicrange 1.3.6.1.4.1.4618.1.2.7.1.13
Integer identifying the range ex. no. cics.
OBJECT-TYPE    
  INTEGER  

trapCause 1.3.6.1.4.1.4618.1.2.7.1.14
Cause indicates Causes for ISUP related alarms: BLOCKING UNBLOCKING INVALIDRNG GROUPBLOCKING GROUPUNBLOCKACK RESETCIRCUIT RESETRELCOMP GROUPRESETCIRCUIT GROUPRESETACK CIRCUITQUERYRESP VALIDATIONSUCCESS VALIDATIONFAILED VALIDATIONFAILEDWRONGCLLI OTHERS
OBJECT-TYPE    
  DisplayString SIZE(1..33)  

trapDpc 1.3.6.1.4.1.4618.1.2.7.1.15
Indicate the point code of the switch
OBJECT-TYPE    
  INTEGER 1..16777215  

trapCdrFileSeqNum 1.3.6.1.4.1.4618.1.2.7.1.16
Indicate the sequence number of the cdr file that has abnormal situation
OBJECT-TYPE    
  INTEGER  

trapCdrFileName 1.3.6.1.4.1.4618.1.2.7.1.17
Indicates the CDR file name or file directory. Can be any combination of alphanumeric characters. Spaces are allowed and cannot exceed 255 characters.
OBJECT-TYPE    
  DisplayString SIZE(1..255)  

trapMeasErrCause 1.3.6.1.4.1.4618.1.2.7.1.18
Indicates the Measurement Files error operation cause
OBJECT-TYPE    
  INTEGER  

trapMeasErrNum 1.3.6.1.4.1.4618.1.2.7.1.19
Indicates the Measurement Files error number of the operation
OBJECT-TYPE    
  INTEGER  

trapRepeatNum 1.3.6.1.4.1.4618.1.2.7.1.20
Indicate the count that trap has occured
OBJECT-TYPE    
  INTEGER  

trapSeverity 1.3.6.1.4.1.4618.1.2.7.1.21
Indicate the severity of the sent trap
OBJECT-TYPE    
  DisplayString  

trapProcessId 1.3.6.1.4.1.4618.1.2.7.1.22
Indicate the process id for that trap has occured
OBJECT-TYPE    
  INTEGER  

trapBucketSize 1.3.6.1.4.1.4618.1.2.7.1.23
Indicate the process Bucket size for the Process for which the trap has occured
OBJECT-TYPE    
  INTEGER  

trapNode1Id 1.3.6.1.4.1.4618.1.2.7.1.24
Indicates the src Xconnect Id which cause congestion
OBJECT-TYPE    
  INTEGER  

trapNode2Id 1.3.6.1.4.1.4618.1.2.7.1.25
Indicates the dest Xconnect Id which cause congestion
OBJECT-TYPE    
  INTEGER  

trapRoutename 1.3.6.1.4.1.4618.1.2.7.1.26
indicate the xoute name that is not found between the xlink
OBJECT-TYPE    
  DisplayString  

trapMeasFileName 1.3.6.1.4.1.4618.1.2.7.1.27
indicate the Measurement file name. Can be any combination of alphanumeric characters. Spaces are allowed and cannot exceed 64 characters.
OBJECT-TYPE    
  DisplayString SIZE(1..255)  

trapDirectory 1.3.6.1.4.1.4618.1.2.7.1.28
indicate the Cdr File Directory
OBJECT-TYPE    
  DisplayString  

trapProcessorId 1.3.6.1.4.1.4618.1.2.7.1.29
Indicates the Process Id
OBJECT-TYPE    
  INTEGER  

trapLogFileName 1.3.6.1.4.1.4618.1.2.7.1.30
Indicate the Log file name. Can be any combination of alphanumeric characters. Spaces are allowed and cannot exceed 64 characters.
OBJECT-TYPE    
  DisplayString SIZE(1..255)  

trapLogErrcause 1.3.6.1.4.1.4618.1.2.7.1.31
Indicate the Log error operation cause
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

trapLogErrNo 1.3.6.1.4.1.4618.1.2.7.1.32
Indicate the log cdr error number of the operation
OBJECT-TYPE    
  INTEGER  

trapPsuNo 1.3.6.1.4.1.4618.1.2.7.1.33
Indicate the Power supply number
OBJECT-TYPE    
  INTEGER  

trapIntId 1.3.6.1.4.1.4618.1.2.7.1.34
Indicate the Power supply number
OBJECT-TYPE    
  INTEGER  

trapIntfcId 1.3.6.1.4.1.4618.1.2.7.1.35
Indicate the Power supply number
OBJECT-TYPE    
  INTEGER  

trapLanId 1.3.6.1.4.1.4618.1.2.7.1.36
Indicate theLan ID
OBJECT-TYPE    
  INTEGER  


trapSwitchId1 1.3.6.1.4.1.4618.1.2.7.1.38
Indicate the xconnect Id
OBJECT-TYPE    
  INTEGER  

trapSwitchId2 1.3.6.1.4.1.4618.1.2.7.1.39
Indicate the xconnect Id
OBJECT-TYPE    
  INTEGER  

trapProcInstNo 1.3.6.1.4.1.4618.1.2.7.1.40
Indicate the Process instance number
OBJECT-TYPE    
  INTEGER  

trapProcName 1.3.6.1.4.1.4618.1.2.7.1.41
Indicate the Process name that Failed
OBJECT-TYPE    
  DisplayString SIZE(1..15)  

trapFanNo 1.3.6.1.4.1.4618.1.2.7.1.42
Indicate the Fan Number
OBJECT-TYPE    
  INTEGER  

trapUserName 1.3.6.1.4.1.4618.1.2.7.1.43
indicates the user login Name
OBJECT-TYPE    
  NameString  

trapBitMapStatus 1.3.6.1.4.1.4618.1.2.7.1.44
Indicates the Bit Map Status of the Cics that are blocked. This Status is only valid for GROUPBLOCKING (I.e range >1)
OBJECT-TYPE    
  DisplayString SIZE(1..33)  

alarmGrp 1.3.6.1.4.1.4618.1.2.7.2
OBJECT IDENTIFIER    

alarmTraps 1.3.6.1.4.1.4618.1.2.7.2.1
OBJECT IDENTIFIER    

genswitchSnmpAgentReadyNotify 1.3.6.1.4.1.4618.1.2.7.2.1.1
Info : SNMP Agent is up
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  

genConsoleLoginNotify 1.3.6.1.4.1.4618.1.2.7.2.1.2
Info : A user has successfully logged in from console
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapUserName  

genConsoleLogoutNotify 1.3.6.1.4.1.4618.1.2.7.2.1.3
Info : A user has successfully logged out from console
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapUserName  

genProcessBufOverflowNotify 1.3.6.1.4.1.4618.1.2.7.2.1.4
Info : Process ran out of buffer
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapProcName  
  trapProcInstNo  
  trapBucketSize  

genProcessBufOverflowRecoverNotify 1.3.6.1.4.1.4618.1.2.7.2.1.5
Info : Process Recovered from Buffer Overflow
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapProcName  
  trapProcInstNo  
  trapBucketSize  

genProcessHeapOverFlowNotify 1.3.6.1.4.1.4618.1.2.7.2.1.6
Info : Process Heap OverFlow Detected
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapProcName  
  trapProcInstNo  

genProcessHeapOverFlowRecoverNotify 1.3.6.1.4.1.4618.1.2.7.2.1.7
Info : Recovered from Process Heap Overflow
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapProcName  
  trapProcInstNo  

xconnectUpNotify 1.3.6.1.4.1.4618.1.2.7.2.1.8
Info : switch has successfully brought up TCP/IP link between MSCG and AC 120 xconnect
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapXconnectId  

xconnectDnNotify 1.3.6.1.4.1.4618.1.2.7.2.1.9
Info : switch has a failure on TCP/IP link between MSCG and AC120
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapXconnectId  

xconnectClkClearNotify 1.3.6.1.4.1.4618.1.2.7.2.1.10
Info : Stratum Card is available
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapSlotId  
  trapPortId  
  trapXconnectId  

xconnectClkFailNotify 1.3.6.1.4.1.4618.1.2.7.2.1.11
Info : Stratum Card has either been removed or has failed
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapSlotId  
  trapPortId  
  trapXconnectId  

xconnectBkplaneRefClkClearNotify 1.3.6.1.4.1.4618.1.2.7.2.1.12
Info : Back Plane reference clock clear
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapSlotId  
  trapXconnectId  

xconnectBkplaneRefClkFailNotify 1.3.6.1.4.1.4618.1.2.7.2.1.13
Info : Back Plane reference clock fail
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapSlotId  
  trapPortId  
  trapXconnectId  

xconnectInterfaceInServiceNotify 1.3.6.1.4.1.4618.1.2.7.2.1.14
Info : Switch has successfully brought the specified interface to be in service
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapSlotId  
  trapPortId  
  trapXconnectId  

xconnectInterfaceOutOfServiceNotify 1.3.6.1.4.1.4618.1.2.7.2.1.15
Info : An interface card is out of service
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapSlotId  
  trapPortId  
  trapXconnectId  

xconnectCardInsertionNotify 1.3.6.1.4.1.4618.1.2.7.2.1.16
Info : A card is inserted in xconnect
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapSlotId  
  trapXconnectId  

xconnectCardRemovalNotify 1.3.6.1.4.1.4618.1.2.7.2.1.17
Info : A card is removed from xconnect
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapSlotId  
  trapXconnectId  

xconnectIllegalCardTypeNotify 1.3.6.1.4.1.4618.1.2.7.2.1.18
Info : Illegal Card Type
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapSlotId  
  trapXconnectId  

xconnectIntfFarEndLOFNotify 1.3.6.1.4.1.4618.1.2.7.2.1.19
Info : Interface Far end LOF
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapSlotId  
  trapPortId  
  trapXconnectId  

xconnectIntfFarEndAISNotify 1.3.6.1.4.1.4618.1.2.7.2.1.20
Info : Interface Far end AIS
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapSlotId  
  trapPortId  
  trapXconnectId  

xconnectIntfNearEndLOFNotify 1.3.6.1.4.1.4618.1.2.7.2.1.21
Info : Interface Near end LOF
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapSlotId  
  trapPortId  
  trapXconnectId  

xconnectIntfNearEndLOSNotify 1.3.6.1.4.1.4618.1.2.7.2.1.22
Info : Interface Near end LOS
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapSlotId  
  trapPortId  
  trapXconnectId  

xconnectIntfCreateNotify 1.3.6.1.4.1.4618.1.2.7.2.1.23
Info : Interface in AC120 has been created
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapSlotId  
  trapPortId  
  trapXconnectId  

xconnectIntfDeleteNotify 1.3.6.1.4.1.4618.1.2.7.2.1.24
Info : Interface in AC120 has been deleted
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapSlotId  
  trapPortId  
  trapXconnectId  

xconnectXlinkAdjConClrNotify 1.3.6.1.4.1.4618.1.2.7.2.1.25
Info : Xconnect Adjacent Congestion cleared
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapNode1Id  
  trapNode2Id  
  trapnumXlinks  

xconnectXlinkAdjConNotify 1.3.6.1.4.1.4618.1.2.7.2.1.26
Info : Xconnect Adjacent Congestion Notified
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapNode1Id  
  trapNode2Id  
  trapnumXlinks  

xconnectXlinkRouteFailNotify 1.3.6.1.4.1.4618.1.2.7.2.1.27
Info : Xpath not found between the Xlink
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapNode1Id  
  trapNode2Id  

xconnectPortUpNotify 1.3.6.1.4.1.4618.1.2.7.2.1.28
Info : Port is Up
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapSlotId  
  trapPortId  
  trapXconnectId  

xconnectCPUSwitchOverNotify 1.3.6.1.4.1.4618.1.2.7.2.1.29
Info : XConnect CPU SwitchOver
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapXconnectId  

atmRAINotify 1.3.6.1.4.1.4618.1.2.7.2.1.30
Info : ATM Remote Alarm Indication
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapSlotId  
  trapPortId  
  trapXconnectId  

atmAISNotify 1.3.6.1.4.1.4618.1.2.7.2.1.31
Info : ATM AIS
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapSlotId  
  trapPortId  
  trapXconnectId  

atmLOFNotify 1.3.6.1.4.1.4618.1.2.7.2.1.32
Info : ATM LOF
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapSlotId  
  trapPortId  
  trapXconnectId  

atmLOSNotify 1.3.6.1.4.1.4618.1.2.7.2.1.33
Info : ATM LOS
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapSlotId  
  trapPortId  
  trapXconnectId  

mfdClearNotify 1.3.6.1.4.1.4618.1.2.7.2.1.34
Info : A potential fault modem is cleared
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapTrunkId  
  trapChnlId  

mfdDetectionNotify 1.3.6.1.4.1.4618.1.2.7.2.1.35
Info : Faulty Modem: A Potential Faulty Modem has been Detected
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapRepeatNum  
  trapTrunkId  
  trapChnlId  

measFileReadyNotify 1.3.6.1.4.1.4618.1.2.7.2.1.36
Info : Measurement file is ready for FTP
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapMeasFileName  

measDiskOverCrtclThresholdNotify 1.3.6.1.4.1.4618.1.2.7.2.1.37
Info : The partition that the measurement file resides on is over critical threshold.
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapMeasErrCause  
  trapMeasErrNum  

measFileMoveNotify 1.3.6.1.4.1.4618.1.2.7.2.1.38
Info : Measurement file moved to secondary directory
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapMeasFileName  

measFileMoveErrNotify 1.3.6.1.4.1.4618.1.2.7.2.1.39
Info : Error in moving Measurement file to secondary directory
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapMeasFileName  

measFileOpenErrNotify 1.3.6.1.4.1.4618.1.2.7.2.1.40
Info : Measurement open file error
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapMeasFileName  

measFileDeleteNotify 1.3.6.1.4.1.4618.1.2.7.2.1.41
Info : Measurement file deleted
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapMeasFileName  

measFileDeleteErrNotify 1.3.6.1.4.1.4618.1.2.7.2.1.42
Info : Measurement delete file error
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapMeasFileName  

cdrFileReadyNotify 1.3.6.1.4.1.4618.1.2.7.2.1.43
Info :Cdr file is ready for Polling
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapCdrFileName  

cdrDiskFullNotify 1.3.6.1.4.1.4618.1.2.7.2.1.44
Info :CDR file disk usage reach critical threshold
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapDirectory  

cdrFileOpenErrNotify 1.3.6.1.4.1.4618.1.2.7.2.1.45
Info :CDR open file error
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapCdrFileName  

cdrFileMoveErrNotify 1.3.6.1.4.1.4618.1.2.7.2.1.46
Info : Error in moving CDR file from temp location to target CDR file location
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapCdrFileName  

cdrDeleteErrNotify 1.3.6.1.4.1.4618.1.2.7.2.1.47
Info : CDR file cannot be deleted
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapCdrFileName  

cdrWriteHeaderErrNotify 1.3.6.1.4.1.4618.1.2.7.2.1.48
Info :Error in writing CDR file header
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapCdrFileName  

cdrWriteRecErrNotify 1.3.6.1.4.1.4618.1.2.7.2.1.49
Info :Error in writing CDR record
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapCdrFileName  

cdrErrFileLocErrNotify 1.3.6.1.4.1.4618.1.2.7.2.1.50
Info: Invalid Cdr Directory
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapCdrFileName  

cdrErrTempFileLocErrNotify 1.3.6.1.4.1.4618.1.2.7.2.1.51
Info: Invalid Cdr Directory
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapCdrFileName  

cdrFileSysErrNotify 1.3.6.1.4.1.4618.1.2.7.2.1.52
Info: Cdr File System Operation error.
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapCdrFileName  

cdrFileCloseErrNotify 1.3.6.1.4.1.4618.1.2.7.2.1.53
Info: Error in closing CDR file
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapCdrFileName  

cdrFileDelete5DaysNotify 1.3.6.1.4.1.4618.1.2.7.2.1.54
Info: cdr files created within past 5 days are deleted
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapCdrFileName  

ss7LinkUpNotify 1.3.6.1.4.1.4618.1.2.7.2.1.55
Info : switch has successfully brought up ss7 mtp3 link
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLinkId  

ss7LinkDnNotify 1.3.6.1.4.1.4618.1.2.7.2.1.56
Info : switch has a failure on ss7 mtp3 link
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLinkId  

ss7Mtp2LinkUpNotify 1.3.6.1.4.1.4618.1.2.7.2.1.57
Info : switch has successfully brought up ss7 mtp2 link
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLinkId  

ss7Mtp2LinkDnNotify 1.3.6.1.4.1.4618.1.2.7.2.1.58
Info : switch has a failure on ss7 mtp2 link
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLinkId  

ss7LinkEnterCongestionNotify 1.3.6.1.4.1.4618.1.2.7.2.1.59
Info : the specified link has entered a congestion situation
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLinkId  

ss7LinkExitCongestionNotify 1.3.6.1.4.1.4618.1.2.7.2.1.60
Info : the ss7 link has exited the congestion situation
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLinkId  

ss7InvalidSLCNotify 1.3.6.1.4.1.4618.1.2.7.2.1.61
Info : Mtp3 invalid SLC configured.
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapDpc  

ss7ConcernedDpcPauseNotify 1.3.6.1.4.1.4618.1.2.7.2.1.62
Info : Concerned DPC pause
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapDpc  

ss7ConcernedDpcResumeNotify 1.3.6.1.4.1.4618.1.2.7.2.1.63
Info : Concerned DPC resume
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapDpc  

ss7ConcernedDpcRemUnAvailNotify 1.3.6.1.4.1.4618.1.2.7.2.1.64
Info : Concerned DPC remote user unavailable
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapDpc  

ss7LinkRemInhNotify 1.3.6.1.4.1.4618.1.2.7.2.1.65
Info : Link Inhibited Remotely
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLinkId  

ss7LinkRemUnInhNotify 1.3.6.1.4.1.4618.1.2.7.2.1.66
Info : Link UnInhibited Remotely
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLinkId  

ss7LinkLocInhNotify 1.3.6.1.4.1.4618.1.2.7.2.1.67
Info : Link Inhibited Locally
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLinkId  

ss7LinkLocUnInhNotify 1.3.6.1.4.1.4618.1.2.7.2.1.68
Info : Link UnInhibited Locally
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLinkId  

ss7LinkLOPBlkNotify 1.3.6.1.4.1.4618.1.2.7.2.1.69
Info : Local Processor Recovered causing link unblocked
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLinkId  

ss7LinkLPRNotify 1.3.6.1.4.1.4618.1.2.7.2.1.70
Info : Local Processor Recovered causing link unblocked
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLinkId  

ss7LinkRPONotify 1.3.6.1.4.1.4618.1.2.7.2.1.71
Info :LSSU/SIPO Received
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLinkId  

ss7LinkRPRNotify 1.3.6.1.4.1.4618.1.2.7.2.1.72
Info :LSSU/SIPO stopped and FISU/MSU recived
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLinkId  

ss7IsupCicLocNotify 1.3.6.1.4.1.4618.1.2.7.2.1.73
Info : ISUP Circuits are blocked/unblocked locally
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapDpc  
  trapCicvalue  
  trapCicrange  
  trapCause  

ss7IsupCicRemNotify 1.3.6.1.4.1.4618.1.2.7.2.1.74
Info : ISUP Circuits are blocked/unblocked remotely
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapDpc  
  trapCicvalue  
  trapCicrange  
  trapCause  

ss7IsupCongLvl1Notify 1.3.6.1.4.1.4618.1.2.7.2.1.75
Info : Route to DPC is encountering Level 1 Congestion
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapDpc  

ss7IsupCongLvl2Notify 1.3.6.1.4.1.4618.1.2.7.2.1.76
Info : Route to DPC is encountering Level 2 Congestion
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapDpc  

isdnDChnlUpNotify 1.3.6.1.4.1.4618.1.2.7.2.1.77
Info : An ISDN D-channel is Up
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapXconnectId  
  trapSlotId  
  trapPortId  

isdnDChnlDnNotify 1.3.6.1.4.1.4618.1.2.7.2.1.78
Info : An ISDN D-channel is down
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapXconnectId  
  trapSlotId  
  trapPortId  

logFileReadyNotify 1.3.6.1.4.1.4618.1.2.7.2.1.79
Info : Logger file is ready
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLogFileName  

logDiskFull60PercentNotify 1.3.6.1.4.1.4618.1.2.7.2.1.80
Info : Log Files occupy 60% of disk quota
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLogErrcause  
  trapLogErrNo  

logDiskFull70PercentNotify 1.3.6.1.4.1.4618.1.2.7.2.1.81
Info : Log Files occupy 70% of disk quota
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLogErrcause  
  trapLogErrNo  

logDiskFull80PercentNotify 1.3.6.1.4.1.4618.1.2.7.2.1.82
Info : Log Files occupy 80% of disk quota
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLogErrcause  
  trapLogErrNo  

logErrFileOpenNotify 1.3.6.1.4.1.4618.1.2.7.2.1.83
Info : Log file open error
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLogFileName  

logErrFileCloseNotify 1.3.6.1.4.1.4618.1.2.7.2.1.84
Info : Log file close error
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLogFileName  

logErrFileDeleteNotify 1.3.6.1.4.1.4618.1.2.7.2.1.85
Info : Log file cannot be deleted
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLogFileName  

logErrFileWriteNotify 1.3.6.1.4.1.4618.1.2.7.2.1.86
Info : Log manager cannot write to log file
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLogFileName  

msscPriDedicatedLinkUpNotify 1.3.6.1.4.1.4618.1.2.7.2.1.87
Info : Dedicated link between the 2 Netra machine is UP
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLinkId  

msscPriDedicatedLinkDownNotify 1.3.6.1.4.1.4618.1.2.7.2.1.88
Info : Dedicated link between the 2 Netra machine is down
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLinkId  

msscSecDedicatedLinkUpNotify 1.3.6.1.4.1.4618.1.2.7.2.1.89
Info : Dedicated link between the 2 Netra machine is UP
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLinkId  

msscSecDedicatedLinkDownNotify 1.3.6.1.4.1.4618.1.2.7.2.1.90
Info :Dedicated link between the 2 Netra machine is down
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLinkId  

msscPriPsuUpNotify 1.3.6.1.4.1.4618.1.2.7.2.1.91
Info : Primary hosts power supply up
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapPsuNo  

msscPriPsuDownNotify 1.3.6.1.4.1.4618.1.2.7.2.1.92
Info : Primary hosts power supply down
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapPsuNo  

msscBakPsuUpNotify 1.3.6.1.4.1.4618.1.2.7.2.1.93
Info : Backup hosts power supply up
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapPsuNo  

msscBakPsuDownNotify 1.3.6.1.4.1.4618.1.2.7.2.1.94
Info : Backup hosts power supply down
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapPsuNo  

msscPriLanPhyIntfUpNotify 1.3.6.1.4.1.4618.1.2.7.2.1.95
Info : Primary Physical LAN Interface Up
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLanId  

msscPriLanPhyIntfDownNotify 1.3.6.1.4.1.4618.1.2.7.2.1.96
Info : Primary Physical LAN Interface Down
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLanId  

msscSecLanPhyIntfUpNotify 1.3.6.1.4.1.4618.1.2.7.2.1.97
Info : Secondary physical LAN Interface Up
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLanId  

msscSecLanPhyIntfDownNotify 1.3.6.1.4.1.4618.1.2.7.2.1.98
Info : Secondary Physical LAN Interface Down
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLanId  

msscPriHostFanUpNotify 1.3.6.1.4.1.4618.1.2.7.2.1.99
Info : Primary Fan Up
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapFanNo  

msscPriHostFanDownNotify 1.3.6.1.4.1.4618.1.2.7.2.1.100
Info : Primary Fan Down
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapFanNo  

msscBckHostFanUpNotify 1.3.6.1.4.1.4618.1.2.7.2.1.101
Info : Backup Fan Up
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapFanNo  

msscBckHostFanDownNotify 1.3.6.1.4.1.4618.1.2.7.2.1.102
Info : Backup Fan Down
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapFanNo  

hubPriIntfUpNotify 1.3.6.1.4.1.4618.1.2.7.2.1.103
Info : Primary Interface Up
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLanId  

hubPriIntfDownNotify 1.3.6.1.4.1.4618.1.2.7.2.1.104
Info : Primary Interface down
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLanId  

hubSecIntfUpNotify 1.3.6.1.4.1.4618.1.2.7.2.1.105
Info : Secondary Interface Up
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLanId  

hubSecIntfDownNotify 1.3.6.1.4.1.4618.1.2.7.2.1.106
Info : Secondary Interface Down
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapLanId  

ftProcessAbnormalTerminationNotify 1.3.6.1.4.1.4618.1.2.7.2.1.107
Info : Process abnormal termination
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapProcName  
  trapProcInstNo  

ftProcessRestartConfigSucceededNotify 1.3.6.1.4.1.4618.1.2.7.2.1.108
Info : Process abnormal termination
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapProcName  
  trapProcInstNo  

ftProcessRestartConfigFailedNotify 1.3.6.1.4.1.4618.1.2.7.2.1.109
Info : Process abnormal termination
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapProcName  
  trapProcInstNo  

ftMsscFtmupNotify 1.3.6.1.4.1.4618.1.2.7.2.1.110
Info : Process abnormal termination
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  

ftControlSwitchOverSucceededNotify 1.3.6.1.4.1.4618.1.2.7.2.1.111
Info : Control SwitchOver Successful
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapProcName  

ftControlSwitchOverFailedNotify 1.3.6.1.4.1.4618.1.2.7.2.1.112
Info : Control SwitchOver Failure
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapProcName  

ftForcedSwitchOverSucceededNotify 1.3.6.1.4.1.4618.1.2.7.2.1.113
Info : Forced SwitchOver Successful
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapProcName  

ftForcedSwitchOverFailedNotify 1.3.6.1.4.1.4618.1.2.7.2.1.114
Info : Forced SwitchOver Failure
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapProcName  

ftProcessRestartDisableNotify 1.3.6.1.4.1.4618.1.2.7.2.1.115
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapProcName  
  trapProcInstNo  

updateDBAuditOpStatNotify 1.3.6.1.4.1.4618.1.2.7.2.1.116
Info : Updated the Database for Audited Related Operational Status
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  

isupIccAuditNotify 1.3.6.1.4.1.4618.1.2.7.2.1.117
ISUP ICC Audit Notify
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  

cdrDiskFullMinorNotify 1.3.6.1.4.1.4618.1.2.7.2.1.118
CDR Disk Usage reached Minor Threshold
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapDirectory  

cdrDiskFullMajorNotify 1.3.6.1.4.1.4618.1.2.7.2.1.119
CDR Disk Usage reached Major Threshold
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapDirectory  

cdrErrMoveCdrNackNotify 1.3.6.1.4.1.4618.1.2.7.2.1.120
Invalid CDR file Non-Ack Directory
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapCdrFileName  

cdrFileMoveCdrNackNotify 1.3.6.1.4.1.4618.1.2.7.2.1.121
CDR file moved to Non-Ack Directory
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapCdrFileName  

ss7CktValidationNotify 1.3.6.1.4.1.4618.1.2.7.2.1.122
Validation of Circuits
TRAP-TYPE    
  trapSeverity  
  trapOpc  
  trapSwitchName  
  trapDpc  
  trapCicvalue  
  trapCause  

switchActiveAlarmTable 1.3.6.1.4.1.4618.1.2.7.2.2
OBJECT-TYPE    
  SEQUENCE OF  
    SwitchActiveAlarmEntry

switchActiveAlarmEntry 1.3.6.1.4.1.4618.1.2.7.2.2.1
OBJECT-TYPE    
  SwitchActiveAlarmEntry  

switchAlarmMsgId 1.3.6.1.4.1.4618.1.2.7.2.2.1.1
Alarm Message Id. Can be any integer from 1-65535.
OBJECT-TYPE    
  INTEGER 1..65535  

switchAlarmInstNo 1.3.6.1.4.1.4618.1.2.7.2.2.1.2
Instance number related to alarm. Can be any integer from 1-65535.
OBJECT-TYPE    
  INTEGER 1..65535  

switchAlarmTime 1.3.6.1.4.1.4618.1.2.7.2.2.1.3
Date and time when the alarma was generated
OBJECT-TYPE    
  DisplayString  

switchAlarmType 1.3.6.1.4.1.4618.1.2.7.2.2.1.4
This specifies the event group is alarm. Default :ALARM
OBJECT-TYPE    
  EventType  

switchAlarmMainEvent 1.3.6.1.4.1.4618.1.2.7.2.2.1.5
This specifies the main event event group of alarm
OBJECT-TYPE    
  AlarmEvent  

switchAlarmSubEvent 1.3.6.1.4.1.4618.1.2.7.2.2.1.6
This specifies the main event event group of alarm
OBJECT-TYPE    
  AlarmSubEvent  

switchAlarmId 1.3.6.1.4.1.4618.1.2.7.2.2.1.7
This specifies the alarm that was sent
OBJECT-TYPE    
  INTEGER  

switchAlarmSeverity 1.3.6.1.4.1.4618.1.2.7.2.2.1.8
This field defines the severity of alarms of alarm. Alarms can od : Major,Minor,Critical and Informational
OBJECT-TYPE    
  AlarmSeverity  

switchAlarmDesc 1.3.6.1.4.1.4618.1.2.7.2.2.1.9
This description related to Generated alarm
OBJECT-TYPE    
  DisplayString  

switchAlarmAck 1.3.6.1.4.1.4618.1.2.7.2.2.1.10
This field is to acknowelge the alarms manually
OBJECT-TYPE    
  ActiveAlarmAckStatus  

switchAlarmRepeatTime 1.3.6.1.4.1.4618.1.2.7.2.2.1.11
Alarm Repeat Time in minutes: After the set time all alarms in the active alarm table will be displayed to the user again
OBJECT-TYPE    
  INTEGER 0..60  

services 1.3.6.1.4.1.4618.2
OBJECT IDENTIFIER    

Defined Objects

RowStatus  
INTEGER createandwait(5), destroy(6), active(1), notinservice(2), notready(3), modified(17), up(22), down(23), outofservice(18)    

LrnRowStatus  
INTEGER createandwait(5), destroy(6), active(1), notinservice(2), notready(3), outofservice(18)    

CktRowStatus  
INTEGER createandwait(5), destroy(6), active(1), notinservice(2), notready(3), modified(17), up(22), down(23), modifytimer(99), outofservice(18), block(20)    

TmrRowStatus  
INTEGER modifytimer(99), active(1), notinservice(2), notready(3), modified(17), up(22), down(23), outofservice(18)    

UserLoginStatus  
INTEGER login(1), logininvalid(2), adduser(3), deleteuser(4)    

UserLoginPriority  
INTEGER admin(1), cts(2), user(8738)    

ProcessStatus  
INTEGER down(1), active(34), standby(51), outofservice(170), switchingover(3), unknown(172)    

IsdnPriority  
INTEGER primary(0), secondary(1), bearing(2)    

IsdnType  
INTEGER nfas(1), fas(0)    

OpStatus  
INTEGER active(1), down(23)    

LinkOpStatus  
INTEGER active(1), down(23), inhibit(19)    

LinkSetOpStatus  
INTEGER active(1), deactive(23)    

CktOpStatus  
INTEGER active(1), down(23), block(20)    

IsdnTrnkOpStatus  
INTEGER active(1), down(23), disable(21)    

ModifyTmrStatus  
INTEGER modifytimer(99), noaction(0)    

IfType  
INTEGER interface-t1(0), interface-t3(1), interface-ut3(2), interface-oc3(3), interface-ut3cp(4), interface-oc3cp(5), interface-e1(8), interface-hde1(9), interface-une3(10), interface-stm(11), interface-oc3aps(12), interface-stm1aps(13)    

AtmIfType  
INTEGER interface-t1(0), interface-e1(8)    

ConnectionType  
INTEGER t3(1), ut3(2), e3(10)    

EnableStatus  
INTEGER yes(1), no(2)    

Ss7RouteType  
INTEGER load(0)    

AddrIdentifier  
INTEGER unknown(2), nationalnumber(3)    

AddrType  
INTEGER callpartynum(1), transitnetwork(2)    

NumPlan  
INTEGER nonumber(0), isdnnumplan(1)    

Direction  
INTEGER in(0), out(1), both(2)    

EnableOperation  
INTEGER enable(16), disable(17)    

IsdnChnlMgtOperation  
INTEGER enable(11), disable(12)    

IsdnTrnkMgtOperation  
INTEGER enable(9), disable(10)    

BlockOperation  
INTEGER block(5), unblock(6), noaction(0)    

Level  
INTEGER level1(1), level2(2)    

ModemResetStatus  
INTEGER yes(1), no(0)    

ModemEnableStatus  
INTEGER enable(1), disable(0)    

MeasEnableStatus  
INTEGER enable(1), disable(0)    

EthernetConnStatus  
INTEGER up(1), down(2)    

Standard  
INTEGER ansi(65), itu(73), telmex(84)    

TrunkType  
INTEGER ss7(34), isdn(17)    

RouteType  
INTEGER ss7RouteType(1), isdnRouteType(2)    

AuditType  
INTEGER ansi(65), itu(73)    

AuditOperation  
INTEGER audit(1), noaction(0)    

Controlstatus  
INTEGER blockckt(5), unblock(6), enablechnl(11), disablechnl(12), noaction(0)    

LinkControlStatus  
INTEGER inhibitlink(1), uninhibitlink(2), noaction(0)    

LinkSetControlStatus  
INTEGER activatelnkset(3), deactivatelnkset(4), noaction(0)    

CircuitControlStatus  
INTEGER blockcic(7), unblockcic(8), queryckt(13), validateckt(14), resetckt(15), noaction(0)    

IsdnControlstatus  
INTEGER enabletrnk(9), disabletrnk(10), noaction(0)    

MtpRteState  
INTEGER rteavail(1), rteunaval(0)    

Bool  
INTEGER yes(1), no(0)    

LoadBalance  
INTEGER disable(0), enable(1)    

TrnkGrpType  
INTEGER ss7(32), isdn(33)    

ActiveAlarmAckStatus  
INTEGER clear(0), noaction(1)    

EventType  
INTEGER alarm(1), emergency(2), audit(3), diagnostics(4), security(5), maintenance(6)    

AlarmEvent  
INTEGER general(1), device(2), protocol(3), mfd(4), cdr(5), measurement(6), log(7), ig(8), faultTolerance(9), nomainevent(0)    

AlarmSubEvent  
INTEGER administration(1), nosubevent(0), operation(2), mssc(3), xconnect(4), hub(5), ss7lnk(6), ss7Br(7), isdn(8), atm(9)    

AlarmSeverity  
INTEGER critical(1), major(2), minor(3), informational(4)    

RoffType  
INTEGER le(1), tandem(2), intlgateway(3)    

NameString  
DisplayString SIZE(1..24)    

AddrString  
DisplayString SIZE(1..24)    

CdrFlag  
INTEGER noCdr(0), ic(1), og(2), bi(3)    

DSPCardType  
INTEGER dsp2B(1), dsp2C(2)    

VoicePcm  
INTEGER alaw(101), ulaw(102)    

TGFeature  
INTEGER enable(1), disable(0)    

FTswitchOver  
INTEGER ftsig(0), fticc(1), ftisdn(2), ftsphr(3), ftlm(4)    

LogFileAttr  
INTEGER alarmlog(3), auditlog(2), measlog(7), diaglog(1), scrtylog(4), eventlog(5), billlog(8), emplog(6)    

LogFileEnDis  
INTEGER alarmlog(3), auditlog(2), measlog(7), diaglog(1), scrtylog(4), eventlog(5), billlog(8), emplog(6), logall(11), noaction(0)    

SwitchType  
INTEGER national(0), international(1)    

LinkType  
INTEGER speed-56K(53), speed-64K(54)    

LogType  
INTEGER on(49), off(48)    

EnableTrace  
INTEGER enable(1), disable(0)    

TrunkState  
INTEGER idle(0), unEquipped(255), cP-Busy(1), maintainance-Busy(2)    

MeasPurgeFlag  
INTEGER autoOff(0), autoOn(1)    

E1MultiFrame  
INTEGER cas(1), ccs(2)    

E1CRC4  
INTEGER enabled(1), disabled(2)    

TransClkSrc  
INTEGER loopTiming(1), localTiming(2)    

DS1LineType  
INTEGER esF(1), d4(2)    

DS1LineCoding  
INTEGER b8zs(1), ami(2)    

DS1LBO  
INTEGER upTo133Feet(1), upTo266Feet(2), upTo399Feet(3), upTo533Feet(4), upTo655Feet(5), negative7-5Db(6), negative15Db(7), negative22-5Db(8)    

DS3LineType  
INTEGER cbitParity(1), clearChannel(2)    

DS3LBO  
INTEGER short(1), long(2)    

DS3ATMCellMap  
INTEGER plcp(1), directMapping(2)    

TimerType  
INTEGER ansi(1), itu(2)    

SwitchPcEntry  
SEQUENCE    
  INTEGER as switchPc  
  Standard as switchPcMode  
  RowStatus as switchPcStatus  

SwitchUserCfgEntry  
SEQUENCE    
  INTEGER as switchUserId  
  NameString as switchUserName  
  NameString as switchUserPassword  
  UserLoginPriority as switchUserPriority  
  UserLoginStatus as switchUserStatus  

Ss7LinkCfgEntry  
SEQUENCE    
  NameString as ss7LinkName  
  INTEGER as ss7LinkId  
  INTEGER as ss7LinkTrunkId  
  INTEGER as ss7LinkChannel  
  INTEGER as ss7LinkSlc  
  LinkType as ss7LinkSpeed  
  Standard as ss7LinkMode  
  RowStatus as ss7LinkRowStatus  
  LinkOpStatus as ss7LinkOpStatus  

Ss7AtmLinkCfgEntry  
SEQUENCE    
  INTEGER as ss7AtmVpi  
  INTEGER as ss7AtmVci  
  INTEGER as ss7AtmLnkId  
  INTEGER as ss7AtmXconnectId  
  INTEGER as ss7AtmSlotId  
  INTEGER as ss7AtmPortId  
  INTEGER as ss7AtmChnlId  
  INTEGER as ss7AtmTrnkId  
  AtmIfType as ss7AtmPhyType  
  RowStatus as ss7AtmLinkRowStatus  
  LinkOpStatus as ss7AtmLinkOpStatus  

Ss7LinksetCfgEntry  
SEQUENCE    
  INTEGER as ss7LinksetLinkId  
  INTEGER as ss7LinksetId  
  NameString as ss7LinksetName  
  INTEGER as ss7LinksetAdjDpc  
  Standard as ss7LinksetMode  
  RowStatus as ss7LinksetRowStatus  
  LinkSetOpStatus as ss7LinksetOpStatus  

Ss7LinksetMgmtEntry  
SEQUENCE    
  INTEGER as linksetId  
  Level as linksetLevel  
  LinkSetControlStatus as linksetMgmntCmd  

Ss7LinkMgmntEntry  
SEQUENCE    
  NameString as linkName  
  LinkControlStatus as linkMgmntCmd  

TrunkGrpCfgEntry  
SEQUENCE    
  INTEGER as trunkGrpId  
  DisplayString as trunkGrpName  
  INTEGER as trunkGrpCarrierId  
  TrnkGrpType as trunkGrpType  
  NameString as trunkGrpRoffName  
  RoffType as trunkGrpRoffType  
  CdrFlag as trunkGrpCdrFlag  
  INTEGER as trunkGrpNoOfTrunks  
  VoicePcm as trunkGrpVoicePcm  
  RowStatus as trunkGrpRowStatus  
  OpStatus as trunkGrpOpStatus  

Ss7TrunkCfgEntry  
SEQUENCE    
  INTEGER as ss7TrunkId  
  NameString as ss7TrunkName  
  INTEGER as ss7TrunkGrpId  
  INTEGER as ss7TrunkXconnectId  
  INTEGER as ss7TrunkSlotId  
  INTEGER as ss7TrunkPortId  
  INTEGER as ss7TrunkOpc  
  INTEGER as ss7TrunkDpc  
  IfType as ss7TrunkPhyType  
  Standard as ss7TrunkMode  
  E1MultiFrame as ss7TrunkE1MultiFrame  
  E1CRC4 as ss7TrunkE1CRC4  
  TransClkSrc as ss7TrunkE1TransClk  
  DS1LineType as ss7TrunkDS1LineType  
  DS1LineCoding as ss7TrunkDS1LineCoding  
  TransClkSrc as ss7TrunkDS1TransClkSrc  
  DS1LBO as ss7TrunkDS1LBO  
  DS3LineType as ss7TrunkDS3LineType  
  TransClkSrc as ss7TrunkDS3TransClkSrc  
  DS3LBO as ss7TrunkDS3LBO  
  DS1LineType as ss7TrunkDS3DS1LineType  
  TransClkSrc as ss7TrunkDS3DS1TransClkSrc  
  TransClkSrc as ss7TrunkOC3TransClkSrc  
  TransClkSrc as ss7TrunkUNCHE3TransClkSrc  
  DS3LineType as ss7TrunkDS3ATMLineType  
  DS3ATMCellMap as ss7TrunkDS3ATMCellMap  
  TransClkSrc as ss7TrunkDS3ATMTransClkSrc  
  DS3LBO as ss7TrunkDS3ATMLBO  
  RowStatus as ss7TrunkRowStatus  
  OpStatus as ss7TrunkOpStatus  

Ss7CktCfgEntry  
SEQUENCE    
  INTEGER as ss7CktTrunkId  
  INTEGER as ss7CktChnlId  
  INTEGER as ss7CktId  
  INTEGER as ss7CktDpc  
  INTEGER as ss7CktCic  
  Direction as ss7CktDir  
  INTEGER as ss7CktPriority  
  INTEGER as ss7CktT3  
  INTEGER as ss7CktT12  
  INTEGER as ss7CktT13  
  INTEGER as ss7CktT14  
  INTEGER as ss7CktT15  
  INTEGER as ss7CktT16  
  INTEGER as ss7CktT17  
  INTEGER as ss7CktTVal  
  CktRowStatus as ss7CktRowStatus  
  CktOpStatus as ss7CktOpStatus  

Ss7CicTmrEntry  
SEQUENCE    
  INTEGER as ss7CktTmrDpc  
  INTEGER as ss7CktTmrCic  
  INTEGER as ss7CktTmrT3  
  INTEGER as ss7CktTmrT12  
  INTEGER as ss7CktTmrT13  
  INTEGER as ss7CktTmrT14  
  INTEGER as ss7CktTmrT15  
  INTEGER as ss7CktTmrT16  
  INTEGER as ss7CktTmrT17  
  INTEGER as ss7CktTmrTVal  
  ModifyTmrStatus as ss7CktTmrRowStatus  

Ss7BCktCfgEntry  
SEQUENCE    
  INTEGER as ss7BCktVpi  
  INTEGER as ss7BCktVci  
  INTEGER as ss7BCktTrunkId  
  INTEGER as ss7BCktDpc  
  INTEGER as ss7BCktCic  
  Direction as ss7BCktDir  
  INTEGER as ss7BCktPriority  
  INTEGER as ss7BCktT3  
  INTEGER as ss7BCktT12  
  INTEGER as ss7BCktT13  
  INTEGER as ss7BCktT14  
  INTEGER as ss7BCktT15  
  INTEGER as ss7BCktT16  
  INTEGER as ss7BCktT17  
  INTEGER as ss7BCktTVal  
  CktRowStatus as ss7BCktRowStatus  
  CktOpStatus as ss7BCktOpStatus  

Ss7CktMgmntEntry  
SEQUENCE    
  INTEGER as ss7CktMgmntTrnkId  
  INTEGER as ss7CktMgmntChnlId  
  INTEGER as ss7CktMgmntRepNum  
  BlockOperation as ss7CktMgmntCmd  

Ss7CICMgmntEntry  
SEQUENCE    
  INTEGER as ss7CktMgmtDPC  
  INTEGER as ss7CktMgmtCIC  
  INTEGER as ss7CktRepNum  
  INTEGER as ss7CicRange  
  CircuitControlStatus as ss7CICMgmntCmd  

Mtp2LinkTmrCfgEntry  
SEQUENCE    
  INTEGER as mtp2LinkId  
  INTEGER as mtp2T1  
  INTEGER as mtp2T2  
  INTEGER as mtp2T3  
  INTEGER as mtp2T4n  
  INTEGER as mtp2T4e  
  INTEGER as mtp2T5  
  INTEGER as mtp2T6  
  INTEGER as mtp2T7  
  TmrRowStatus as mtp2RowStatus  
  OpStatus as mtp2OpStatus  

Mtp3LinkCfgEntry  
SEQUENCE    
  INTEGER as mtp3LinkId  
  INTEGER as mtp3T1  
  INTEGER as mtp3T2  
  INTEGER as mtp3T3  
  INTEGER as mtp3T4  
  INTEGER as mtp3T5  
  INTEGER as mtp3T6  
  INTEGER as mtp3T7  
  INTEGER as mtp3T12  
  INTEGER as mtp3T13  
  INTEGER as mtp3T14  
  INTEGER as mtp3T17  
  INTEGER as mtp3T22  
  INTEGER as mtp3T23  
  INTEGER as mtp3T24  
  INTEGER as mtp3T31  
  INTEGER as mtp3T32  
  INTEGER as mtp3T33  
  INTEGER as mtp3T34  
  INTEGER as mtp3T35  
  INTEGER as mtp3T36  
  INTEGER as mtp3T37  
  INTEGER as mtp3TFLC  
  INTEGER as mtp3TBND  
  TmrRowStatus as mtp3RowStatus  
  OpStatus as mtp3OpStatus  

IsupTimerCfgEntry  
SEQUENCE    
  TimerType as isupTimerType  
  INTEGER as isupTmrT1  
  INTEGER as isupTmrT2  
  INTEGER as isupTmrT5  
  INTEGER as isupTmrT6  
  INTEGER as isupTmrT7  
  INTEGER as isupTmrT8  
  INTEGER as isupTmrT9  
  INTEGER as isupTmrT18  
  INTEGER as isupTmrT19  
  INTEGER as isupTmrT20  
  INTEGER as isupTmrT21  
  INTEGER as isupTmrT22  
  INTEGER as isupTmrT23  
  INTEGER as isupTmrT27  
  INTEGER as isupTmrT28  
  INTEGER as isupTmrT31  
  INTEGER as isupTmrT33  
  INTEGER as isupTmrT34  
  INTEGER as isupTmrT36  
  INTEGER as isupTmrTCCR  
  INTEGER as isupTmrTEX  
  INTEGER as isupTmrTCRM  
  INTEGER as isupTmrTCRA  
  INTEGER as isupTmrTCCRt  
  INTEGER as isupTmrTECt  
  INTEGER as isupTmrTGTCHG  
  INTEGER as isupTmrTGRES  
  INTEGER as isupTmrTFGR  
  INTEGER as isupTmrTRELRSP  
  INTEGER as isupTmrTFNLRELRS  
  ModifyTmrStatus as isupTimerRowStatus  

Ss7RtDpcEntry  
SEQUENCE    
  INTEGER as ss7RtDPC  
  INTEGER as ss7RtCmbLinksetId  
  Standard as ss7RtLoadShareType  
  RowStatus as ss7RtRowStatus  
  OpStatus as ss7RtOpStatus  

IsdnTmrCfgEntry  
SEQUENCE    
  INTEGER as isdnTnkId  
  INTEGER as isdnTmrT301  
  INTEGER as isdnTmrT302  
  INTEGER as isdnTmrT303  
  INTEGER as isdnTmrT304  
  INTEGER as isdnTmrT305  
  INTEGER as isdnTmrT306  
  INTEGER as isdnTmrT307  
  INTEGER as isdnTmrT308  
  INTEGER as isdnTmrT310  
  INTEGER as isdnTmrT311  
  INTEGER as isdnTmrT312  
  INTEGER as isdnTmrT313  
  INTEGER as isdnTmrT316  
  INTEGER as isdnTmrT318  
  INTEGER as isdnTmrT319  
  INTEGER as isdnTmrT322  
  INTEGER as isdnTmrT316C  
  INTEGER as isdnTmrT330  
  INTEGER as isdnTmrT331  
  INTEGER as isdnTmrT332  
  INTEGER as isdnTmrTRST  
  INTEGER as isdnTmrTREST  
  INTEGER as isdnTmrTANS  
  INTEGER as isdnTmrT396  
  INTEGER as isdnTmrT397  
  TmrRowStatus as isdnTrnkTmrRowStatus  
  OpStatus as isdnTrnkTmrOpStatus  

IsdnTrunkCfgEntry  
SEQUENCE    
  INTEGER as isdnTrunkId  
  NameString as isdnTrunkName  
  INTEGER as isdnTrunkGrpId  
  INTEGER as isdnDchnlId  
  IsdnType as isdnTrunkType  
  INTEGER as isdnXconnectId  
  INTEGER as isdnSlotId  
  INTEGER as isdnPortId  
  Direction as isdnDirection  
  IsdnPriority as isdnPriority  
  INTEGER as isdnDurthreshold  
  INTEGER as isdnCntthreshold  
  IfType as isdnPhyIntfType  
  INTEGER as isdnDchnlTimeSlot  
  E1MultiFrame as isdnE1MultiFrame  
  E1CRC4 as isdnE1CRC4  
  TransClkSrc as isdnE1TransClk  
  DS1LineType as isdnDS1LineType  
  DS1LineCoding as isdnDS1LineCoding  
  TransClkSrc as isdnDS1TransClkSrc  
  DS1LBO as isdnDS1LBO  
  DS3LineType as isdnDS3LineType  
  TransClkSrc as isdnDS3TransClkSrc  
  DS3LBO as isdnDS3LBO  
  DS1LineType as isdnDS3DS1LineType  
  TransClkSrc as isdnDS3DS1TransClkSrc  
  RowStatus as isdnTrunkRowStatus  
  IsdnTrnkOpStatus as isdnTrunkOpStatus  

IsdnChnlStatusCfgEntry  
SEQUENCE    
  INTEGER as isdnStatusTrunkId  
  INTEGER as isdnStatusChnlId  
  TrunkState as isdnStatusChnlState  
  INTEGER as isdnStatusChnlAllocMeth  
  INTEGER as isdnStatusChnlSuConnId  

IsdnTrnkMgmntEntry  
SEQUENCE    
  INTEGER as isdnTrnkMgmntId  
  IsdnTrnkMgtOperation as isdnTrnkMgmntCmd  

IsdnChnlMgmntEntry  
SEQUENCE    
  INTEGER as isdnTrunkMgmntId  
  INTEGER as isdnChnlMgmntId  
  IsdnChnlMgtOperation as isdnChnlMgmntCmd  

MfdMgmntEntry  
SEQUENCE    
  INTEGER as isdnTnkMgmntId  
  INTEGER as isdnDurThreshold  
  INTEGER as isdnCntThreshold  
  EnableOperation as mfdMgmntCmd  

RouteEntry  
SEQUENCE    
  INTEGER as routeId  
  AddrType as routeAddrType  
  AddrIdentifier as routeAdrId  
  AddrString as routeAddr  
  NumPlan as routeNumPlan  
  INTEGER as routeNumOfDigit  
  NameString as routeRouteName  
  RouteType as routeRouteType  
  RowStatus as routeRowStatus  
  OpStatus as routeOpStatus  

RtEntryIsdnCfgEntry  
SEQUENCE    
  INTEGER as rtEntryIsdnGrpId  
  INTEGER as rtEntryIsdntrunkId  
  NameString as rtEntryIsdnRouteName  
  RowStatus as rtEntryIsdnRowStatus  
  OpStatus as rtEntryIsdnOpStatus  

RtEntrySs7CfgEntry  
SEQUENCE    
  INTEGER as rtEntrySs7GrpId  
  INTEGER as rtEntrySs7CmbLinksetId  
  NameString as rtEntrySs7RouteName  
  INTEGER as rtEntrySs7Dpc  
  Standard as rtEntrySs7Mode  
  RowStatus as rtEntrySs7RowStatus  
  OpStatus as rtEntrySs7OpStatus  

DigitStripMgmntEntry  
SEQUENCE    
  NameString as rtName  
  AddrIdentifier as rtAddrType  
  INTEGER as rtNumOfDigit  
  EnableOperation as rtMgmntCmd  

IsdnLoadBalanceMgmntEntry  
SEQUENCE    
  NameString as rteName  
  EnableOperation as ilbMgmntCmd  

MeasTrnkGrpTrafficEntry  
SEQUENCE    
  DisplayString as measTrnkGrpName  
  INTEGER as measTrnkGrpDataSuspect  
  INTEGER as measTrnkGrpincomingUsage  
  INTEGER as measTrnkGrpoutgoingUsage  
  INTEGER as measTrnkGrpISCicsChnls  
  INTEGER as measTrnkGrpOOSCicsChnls  
  INTEGER as measTrnkGrptotalUsage  
  INTEGER as measTrnkGrpmaintainanceUsage  

MeasLinkTrafficEntry  
SEQUENCE    
  NameString as measLinkName  
  INTEGER as measLinkDataSuspect  
  INTEGER as measLinkUnavailableDuration  
  INTEGER as measLinkInServiceDuration  
  INTEGER as measLinkMSUsRetransmitted  
  INTEGER as measLinkOctetsReceived  
  INTEGER as measLinkOctectsTransmitted  
  INTEGER as measLinkLostMSUsBufferOverflow  
  INTEGER as measLinkMSUsDiscarded  

XconnectCfgEntry  
SEQUENCE    
  INTEGER as xconnectId  
  NameString as xconnectName  
  IpAddress as xconnectIPAddr  
  INTEGER as xconnectTCPPort  
  RowStatus as xconnectRowStatus  
  OpStatus as xconnectOpStatus  

XlinkCfgEntry  
SEQUENCE    
  INTEGER as xconnectIdEndA  
  INTEGER as slotIdEndA  
  INTEGER as portIdEndA  
  INTEGER as xconnectIdEndB  
  INTEGER as slotIdEndB  
  INTEGER as portIdEndB  
  ConnectionType as xlinkConnectionType  
  RowStatus as xlinkRowStatus  
  OpStatus as xlinkOpStatus  

XlinkMgmntEntry  
SEQUENCE    
  INTEGER as xconnIdEndA  
  INTEGER as xconnSlotIdEndA  
  INTEGER as xconnPortIdEndA  
  INTEGER as xconnIdEndB  
  INTEGER as xconnSlotIdEndB  
  INTEGER as xconnPortIdEndB  
  EnableOperation as xlinkMgmntCmd  

CdrMngmtTrnkGrpEntry  
SEQUENCE    
  INTEGER as cdrTrnkGrpId  
  CdrFlag as cdrTrnkGrpdirection  
  EnableOperation as cdrTrnkGrpMgmntCmd  

ModemStatusEntry  
SEQUENCE    
  INTEGER as faultModemTrnkId  
  INTEGER as faultModemChnlId  
  INTEGER as faultModemRepnum  
  ModemResetStatus as faultModemReset  

LrnEntry  
SEQUENCE    
  DisplayString as lrnNum  
  LrnRowStatus as lrnRowStatus  

SwitchDSPCfgEntry  
SEQUENCE    
  INTEGER as switchDSPXconnId  
  INTEGER as switchDSPSlotId  
  DSPCardType as switchDSPCardType  
  RowStatus as switchDSPCfgRowStatus  
  OpStatus as switchDSPCfgOpStatus  

SwitchFeatureTGCfgEntry  
SEQUENCE    
  INTEGER as switchFeatureTGId  
  NameString as switchFeatureTGName  
  TrnkGrpType as switchFeatureTGType  
  TGFeature as switchFeatureTGFeatureEC  
  TGFeature as switchFeatureTGFeatureCOMPRESS  
  TGFeature as switchFeatureTGFeatureSS  
  TGFeature as switchFeatureTGFeatureCNIS  

Ss7LnkTraceEntry  
SEQUENCE    
  INTEGER as ss7LnkId  
  LogType as ss7LnkLog  
  EnableTrace as ss7LnkEnable  

Ss7RouteTraceEntry  
SEQUENCE    
  INTEGER as ss7RouteDpc  
  LogType as ss7RouteLog  
  EnableTrace as ss7RouteEnable  

IsdntrunkTraceEntry  
SEQUENCE    
  INTEGER as isdnTrnkId  
  LogType as isdnTrunkLog  
  EnableTrace as isdnTrunkEnable  

AuditISDNTrnkCfgEntry  
SEQUENCE    
  INTEGER as auditTrnkId  
  AuditOperation as auditISDNTrnk  

AuditDPCCfgEntry  
SEQUENCE    
  INTEGER as auditPointCode  
  AuditType as auditPointCodeType  
  AuditOperation as auditDPC  

SwitchActiveAlarmEntry  
SEQUENCE    
  INTEGER as switchAlarmMsgId  
  INTEGER as switchAlarmInstNo  
  DisplayString as switchAlarmTime  
  EventType as switchAlarmType  
  AlarmEvent as switchAlarmMainEvent  
  AlarmSubEvent as switchAlarmSubEvent  
  INTEGER as switchAlarmId  
  AlarmSeverity as switchAlarmSeverity  
  DisplayString as switchAlarmDesc  
  ActiveAlarmAckStatus as switchAlarmAck  
  INTEGER as switchAlarmRepeatTime