ASCEND-MIBANSWER-MIB

File: ASCEND-MIBANSWER-MIB.mib (31512 bytes)

Imported modules

ASCEND-MIB RFC1155-SMI RFC-1212

Imported symbols

configuration IpAddress OBJECT-TYPE

Defined Objects

mibanswerProfile 1.3.6.1.4.1.529.23.3
OBJECT IDENTIFIER    

mibanswerProfileTable 1.3.6.1.4.1.529.23.3.1
A list of mibanswerProfile profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    MibanswerProfileEntry

mibanswerProfileEntry 1.3.6.1.4.1.529.23.3.1.1
A mibanswerProfile entry containing objects that maps to the parameters of mibanswerProfile profile.
OBJECT-TYPE    
  MibanswerProfileEntry  

answerProfile-Index-o 1.3.6.1.4.1.529.23.3.1.1.1
OBJECT-TYPE    
  INTEGER  

answerProfile-UseAnswerForAllDefaults 1.3.6.1.4.1.529.23.3.1.1.2
When set to Yes, this profile will provide the default values for fields when building profiles. When set to No the factory profile will be used instead.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-Force56kbps 1.3.6.1.4.1.529.23.3.1.1.3
If yes then inbound 64 kbps calls are connected at 56 kbps.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-ProfilesRequired 1.3.6.1.4.1.529.23.3.1.1.4
Unused when incoming authentication is used. When authentication is not used a No value in this field indicates that we will create a temporary profile for a user on incoming calls. A Yes value indicates that we must find an existing profile (by matching the caller's IP address). This provided NO security.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-ClidAuthMode 1.3.6.1.4.1.529.23.3.1.1.5
Specifies how calling line identification (CLID) will be used for incoming call authentication.
OBJECT-TYPE    
  INTEGER ignore(1), clidRequire(3), clidPrefer(2), clidFirst(7), clidFallback(4), dnisRequire(5), dnisPref(6), dnisFirst(8), dnisFallback(9)  

answerProfile-PppAnswer-Enabled 1.3.6.1.4.1.529.23.3.1.1.6
Set to Yes to enable incoming PPP calls. This includes the PPP variants, MP and MPP.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-PppAnswer-ReceiveAuthMode 1.3.6.1.4.1.529.23.3.1.1.7
The type of PPP authentication to use for incoming calls.
OBJECT-TYPE    
  INTEGER noPppAuth(1), papPppAuth(2), chapPppAuth(3), anyPppAuth(4), desPapPppAuth(5), tokenPapPppAuth(6), tokenChapPppAuth(7), cacheTokenPppAuth(8), msChapPppAuth(9), papPreferred(10)  

answerProfile-PppAnswer-DisconnectOnAuthTimeout 1.3.6.1.4.1.529.23.3.1.1.8
???.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-PppAnswer-BridgingGroup 1.3.6.1.4.1.529.23.3.1.1.9
The default bridging group. Interfaces with the same bridging group can bridge to each other. Set to 0 to disable bridging.
OBJECT-TYPE    
  INTEGER  

answerProfile-PppAnswer-LinkCompression 1.3.6.1.4.1.529.23.3.1.1.10
The default type of link compression to use for PPP, MP, and MPP calls.
OBJECT-TYPE    
  INTEGER none(1), stac(2), stac9(3), msStac(4), mppc(5)  

answerProfile-PppAnswer-Mru 1.3.6.1.4.1.529.23.3.1.1.11
The Maximum Receive Unit, i.e. the largest frame we will accept.
OBJECT-TYPE    
  INTEGER  

answerProfile-PppAnswer-Lqm 1.3.6.1.4.1.529.23.3.1.1.12
Link Quality Monitoring. Set to Yes to enable the PPP LQM protocol.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-PppAnswer-LqmMinimumPeriod 1.3.6.1.4.1.529.23.3.1.1.13
The minimum period, in 1/100 of a second, that we will accept/send link quality monitoring packets.
OBJECT-TYPE    
  INTEGER  

answerProfile-PppAnswer-LqmMaximumPeriod 1.3.6.1.4.1.529.23.3.1.1.14
The maximum period, in 1/100 of a second, that we will accept/send link quality monitoring packets.
OBJECT-TYPE    
  INTEGER  

answerProfile-MpAnswer-Enabled 1.3.6.1.4.1.529.23.3.1.1.15
Set to Yes to enable incoming MP calls. This includes the MP variant, MPP.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-MpAnswer-MinimumChannels 1.3.6.1.4.1.529.23.3.1.1.16
The default value for the minimum number of channels in a multi-channel call.
OBJECT-TYPE    
  INTEGER  

answerProfile-MpAnswer-MaximumChannels 1.3.6.1.4.1.529.23.3.1.1.17
The default value for the maximum number of channels in a multi-channel call.
OBJECT-TYPE    
  INTEGER  

answerProfile-MpAnswer-BacpEnable 1.3.6.1.4.1.529.23.3.1.1.18
Enable Bandwidth Allocation Control Protocol (BACP).
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-MppAnswer-Enabled 1.3.6.1.4.1.529.23.3.1.1.19
Set to Yes to enable incoming MPP calls.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-MppAnswer-DynamicAlgorithm 1.3.6.1.4.1.529.23.3.1.1.20
The algorithm to use to calculate the average link utilization. Bandwidth changes are performed on the average utilization, not current utilization.
OBJECT-TYPE    
  INTEGER constant(1), linear(2), quadratic(3)  

answerProfile-MppAnswer-BandwidthMonitorDirection 1.3.6.1.4.1.529.23.3.1.1.21
The direction to monitor link utilization. A unit can monitor transmit, transmit and receive, or turn off monitoring entirely.
OBJECT-TYPE    
  INTEGER transmit(1), transmitRecv(2), none(3)  

answerProfile-MppAnswer-IncrementChannelCount 1.3.6.1.4.1.529.23.3.1.1.22
Number of channels to increment as a block.
OBJECT-TYPE    
  INTEGER  

answerProfile-MppAnswer-DecrementChannelCount 1.3.6.1.4.1.529.23.3.1.1.23
Number of channels to decrement as a block.
OBJECT-TYPE    
  INTEGER  

answerProfile-MppAnswer-SecondsHistory 1.3.6.1.4.1.529.23.3.1.1.24
The number of seconds of history that link utilization is averaged over to make bandwidth changes.
OBJECT-TYPE    
  INTEGER  

answerProfile-MppAnswer-AddPersistence 1.3.6.1.4.1.529.23.3.1.1.25
The number of seconds of that the average line utilization must exceed the target utilization before bandwidth will be added.
OBJECT-TYPE    
  INTEGER  

answerProfile-MppAnswer-SubPersistence 1.3.6.1.4.1.529.23.3.1.1.26
The number of seconds of that the average line utilization must fall below the target utilization before bandwidth will be reduced. Bandwidth will not be reduced if the reduced bandwidth would exceed the target utilization.
OBJECT-TYPE    
  INTEGER  

answerProfile-MppAnswer-TargetUtilization 1.3.6.1.4.1.529.23.3.1.1.27
The default value for the target utilization. Bandwidth changes occur when the average utilization exceeds or falls below this value.
OBJECT-TYPE    
  INTEGER  

answerProfile-FrAnswer-Enabled 1.3.6.1.4.1.529.23.3.1.1.28
Set to yes to enable incoming FR calls.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-TcpClearAnswer-Enabled 1.3.6.1.4.1.529.23.3.1.1.29
If enabled, incoming calls that match a local profile with a call management type of tcp-raw will automatically be connected via a raw TCP pipe to the host named in the local profile. If disabled, logins that match a tcp-raw profile will be rejected.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-AraAnswer-Enabled 1.3.6.1.4.1.529.23.3.1.1.30
Set to yes to enable incoming ARA calls.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-V120Answer-Enabled 1.3.6.1.4.1.529.23.3.1.1.31
Set to yes to enable incoming V120 calls.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-V120Answer-FrameLength 1.3.6.1.4.1.529.23.3.1.1.32
The default frame length to use for incoming V.120 connections.
OBJECT-TYPE    
  INTEGER  

answerProfile-X25Answer-Enabled 1.3.6.1.4.1.529.23.3.1.1.33
If enabled, incoming calls that match a local profile with a call management type of x25 will be accepted.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-X25Answer-X25Profile 1.3.6.1.4.1.529.23.3.1.1.34
Name of the x25 profile that this profile is associated with.
OBJECT-TYPE    
  DisplayString  

answerProfile-X25Answer-X3Profile 1.3.6.1.4.1.529.23.3.1.1.35
X.3 profile parameter index
OBJECT-TYPE    
  INTEGER crtProfile(1), infonetProfile(2), defaultProfile(3), scenProfile(4), ccSspProfile(5), ccTspProfile(6), hardcopyProfile(7), hdxProfile(8), sharkProfile(9), posProfile(12), nullProfile(10), customProfile(11)  

answerProfile-X25Answer-MaxCalls 1.3.6.1.4.1.529.23.3.1.1.36
Max number of unsuccessful calls
OBJECT-TYPE    
  INTEGER  

answerProfile-X25Answer-VcTimerEnable 1.3.6.1.4.1.529.23.3.1.1.37
PAD VCE enable flag
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-X25Answer-AutoCallX121Address 1.3.6.1.4.1.529.23.3.1.1.38
X.121 address to auto-call upon session startup.
OBJECT-TYPE    
  DisplayString  

answerProfile-X25Answer-ReverseCharge 1.3.6.1.4.1.529.23.3.1.1.39
Reverse charge request
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-X25Answer-X3CustomProf 1.3.6.1.4.1.529.23.3.1.1.40
Custom profile enter a string for a custom X.3 profile if x3Prof says custom.
OBJECT-TYPE    
  DisplayString  

answerProfile-EuAnswer-EurawEnabled 1.3.6.1.4.1.529.23.3.1.1.45
Enable/disable the EUNET raw protocol.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-EuAnswer-EuuiEnabled 1.3.6.1.4.1.529.23.3.1.1.46
Enable/disable the EUNET UI protocol.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-EuAnswer-DceAddr 1.3.6.1.4.1.529.23.3.1.1.47
The address of the DCE side of the link when the EUNET UI protocol is used.
OBJECT-TYPE    
  INTEGER  

answerProfile-EuAnswer-DteAddr 1.3.6.1.4.1.529.23.3.1.1.48
The address of the DTE side of the link when the EUNET UI protocol is used.
OBJECT-TYPE    
  INTEGER  

answerProfile-EuAnswer-Mru 1.3.6.1.4.1.529.23.3.1.1.49
The Maximum Receive Unit, i.e. the largest frame we will accept when the EUNET UI protocol is used.
OBJECT-TYPE    
  INTEGER  

answerProfile-IpAnswer-Enabled 1.3.6.1.4.1.529.23.3.1.1.50
Set to yes to enable IP routing on incoming calls using encapsulation protocols that support IP routing.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-IpAnswer-VjHeaderPrediction 1.3.6.1.4.1.529.23.3.1.1.51
Set to yes to enable Van Jacobson IP header prediction to be negotiated on incoming calls using encapsulation protocols that support this feature.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-IpAnswer-AssignAddress 1.3.6.1.4.1.529.23.3.1.1.52
Set to yes if this unit is configured with one or more pools of IP addresses that will be used as a source of addresses to assign to incoming callers.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-IpAnswer-RoutingMetric 1.3.6.1.4.1.529.23.3.1.1.53
The default metric assigned to routes created for incoming calls.
OBJECT-TYPE    
  INTEGER  

answerProfile-IpxAnswer-Enabled 1.3.6.1.4.1.529.23.3.1.1.54
Set to Yes to enable incoming IPX calls.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-IpxAnswer-PeerMode 1.3.6.1.4.1.529.23.3.1.1.55
Enable/disable full routing between peer or use the pool to assign a network number.
OBJECT-TYPE    
  INTEGER routerPeer(1), dialinPeer(2)  

answerProfile-SessionInfo-CallFilter 1.3.6.1.4.1.529.23.3.1.1.56
The name of the filter used to determine if a packet should cause the idle timer to be reset or, when the answer profile is used for connection profile defaults, if a call should be placed.
OBJECT-TYPE    
  DisplayString  

answerProfile-SessionInfo-DataFilter 1.3.6.1.4.1.529.23.3.1.1.57
The name of the filter used to determine if packets should be forwarded or dropped.
OBJECT-TYPE    
  DisplayString  

answerProfile-SessionInfo-FilterPersistence 1.3.6.1.4.1.529.23.3.1.1.58
Determines if filters should persist between calls.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-SessionInfo-IdleTimer 1.3.6.1.4.1.529.23.3.1.1.59
The number of seconds of no activity before a call will be dropped. The value 0 disables the idle timer.
OBJECT-TYPE    
  INTEGER  

answerProfile-SessionInfo-TsIdleMode 1.3.6.1.4.1.529.23.3.1.1.60
The method used to determine when the terminal server idle session timer is reset.
OBJECT-TYPE    
  INTEGER noIdle(1), inputOnlyIdle(2), inputOutputIdle(3)  

answerProfile-SessionInfo-TsIdleTimer 1.3.6.1.4.1.529.23.3.1.1.61
The number of seconds of no activity as defined by the idle mode before a session will be terminated.
OBJECT-TYPE    
  INTEGER  

answerProfile-SessionInfo-MaxCallDuration 1.3.6.1.4.1.529.23.3.1.1.62
The number of minutes of connect time before a call will be dropped. The value 0 disables the connection timer.
OBJECT-TYPE    
  INTEGER  

answerProfile-X75Answer-Enabled 1.3.6.1.4.1.529.23.3.1.1.63
Set to yes to enable incoming X75 calls.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-X75Answer-KFramesOutstanding 1.3.6.1.4.1.529.23.3.1.1.64
Number of frames outstanding before we require an ack. Defaults to 7.
OBJECT-TYPE    
  INTEGER  

answerProfile-X75Answer-N2Retransmissions 1.3.6.1.4.1.529.23.3.1.1.65
Number of retransmissions allowed. Defaults to 10.
OBJECT-TYPE    
  INTEGER  

answerProfile-X75Answer-T1RetranTimer 1.3.6.1.4.1.529.23.3.1.1.66
Number of milliseconds between retransmissions. Defaults to 1000.
OBJECT-TYPE    
  INTEGER  

answerProfile-X75Answer-FrameLength 1.3.6.1.4.1.529.23.3.1.1.67
Frame length to use for incoming X.75 connections. Defaults to 1024.
OBJECT-TYPE    
  INTEGER  

answerProfile-FramedOnly 1.3.6.1.4.1.529.23.3.1.1.68
A profile can be restricted to only doing the framed commands (ppp, mpp, slip, and quit) by setting this to YES
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-Action-o 1.3.6.1.4.1.529.23.3.1.1.69
OBJECT-TYPE    
  INTEGER noAction(1), createProfile(2), deleteProfile(3)  

answerProfile-PppAnswer-CbcpEnabled 1.3.6.1.4.1.529.23.3.1.1.70
Enable Microsoft Callback Control Protocol Negotiation.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-HdlcNrmAnswer-Enabled 1.3.6.1.4.1.529.23.3.1.1.71
Set to yes to enable incoming HDLC-NRM calls.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-Visa2Answer-Enabled 1.3.6.1.4.1.529.23.3.1.1.72
Set to yes to enable incoming VISA2 calls.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-ClidSelection 1.3.6.1.4.1.529.23.3.1.1.73
Selection of the CLID. An incoming call can optionally specify several CLIDs. A CLID provided by the PSTN (network provided) is considered secure. A CLID provided by the end user (user provided) is secure only if it has been validated by the PSTN (user provided, network verified and passed). Other forms of user CLIDs are considered unsecure.
OBJECT-TYPE    
  INTEGER first(1), securePrefer(2), secureRequire(3), userPrefer(4), userRequire(5)  

answerProfile-PppAnswer-IpxHeaderCompression 1.3.6.1.4.1.529.23.3.1.1.74
Use IPX header compression if encapsulation supports it.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-PppAnswer-Mtu 1.3.6.1.4.1.529.23.3.1.1.75
The Maximum Transmit Unit, i.e. the largest frame we will send out.
OBJECT-TYPE    
  INTEGER  

answerProfile-IpAnswer-PrivateRouteProfileRequired 1.3.6.1.4.1.529.23.3.1.1.76
Parameter to decide default action,if private route table not found. If set to yes, the call will be cleared if the private route profile cannot be found. If set to no, the call will be allowed to complete, even if the private route profile cannot be found.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-SessionInfo-FilterRequired 1.3.6.1.4.1.529.23.3.1.1.77
If No, the call will be allowed to come up even if the specified filter was not found either locally, in the cache or in RADIUS. If Yes, then the call will be cleared if the specified filter was not found either locally, in the cache or in RADIUS.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-AtmAnswer-SvcEnabled 1.3.6.1.4.1.529.23.3.1.1.78
Set to yes to enable ATM SVC athentication on incoming calls.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

answerProfile-PppAnswer-BiDirectionalAuth 1.3.6.1.4.1.529.23.3.1.1.79
This parameter enables the authentication to be done in both directions. It can be used only with the CHAP, MS-CHAP or CACHE-TOKEN authentication.
OBJECT-TYPE    
  INTEGER none(1), allowed(2), required(3)  

answerProfile-PppAnswer-SubstituteSendName 1.3.6.1.4.1.529.23.3.1.1.80
Name send to the far end, if different from the global system name.
OBJECT-TYPE    
  DisplayString  

answerProfile-PppAnswer-AuthForAsyncFramedUsers 1.3.6.1.4.1.529.23.3.1.1.81
Determines whether we need to authenticate async framed users.
OBJECT-TYPE    
  INTEGER notRequired(1), required(2)  

answerProfile-PppAnswer-MaxPapAuthRetry 1.3.6.1.4.1.529.23.3.1.1.82
Number of retries allowed, if PAP authentication fails.
OBJECT-TYPE    
  INTEGER  

answerProfile-IpAnswer-PoolForAsyncFramedUser 1.3.6.1.4.1.529.23.3.1.1.83
Pool number to be used for dial-in asynchronous PPP framed users with out authentication.
OBJECT-TYPE    
  INTEGER  

answerProfile-CallbackClidPrefix 1.3.6.1.4.1.529.23.3.1.1.85
Prefix to prepend to the dial number when callback is performed with the CLID number.
OBJECT-TYPE    
  DisplayString  

answerProfile-PriorityAnswer-PacketClassification 1.3.6.1.4.1.529.23.3.1.1.87
Method used to classify PPP packets.
OBJECT-TYPE    
  INTEGER qosTag(2), udpPortRange(3)  

answerProfile-PriorityAnswer-MaxRtpPacketDelay 1.3.6.1.4.1.529.23.3.1.1.88
Maximum delay for RTP packets in milli-seconds. Used for calculating the fragment size for the non-rtp traffic using the same link.
OBJECT-TYPE    
  INTEGER  

answerProfile-PriorityAnswer-MinimumRtpPort 1.3.6.1.4.1.529.23.3.1.1.89
Minimum UDP port for prioritization
OBJECT-TYPE    
  INTEGER  

answerProfile-PriorityAnswer-MaximumRtpPort 1.3.6.1.4.1.529.23.3.1.1.90
Maximum UDP port for prioritization
OBJECT-TYPE    
  INTEGER  

answerProfile-PriorityAnswer-NoHighPrioPktDuration 1.3.6.1.4.1.529.23.3.1.1.91
The number of seconds of no high priority packets before disabling IP fragmentation of low priority packets. The value 0 disables checking duration of no high priority packet.
OBJECT-TYPE    
  INTEGER  

answerProfile-PppAnswer-MaxPppConfigureRetry 1.3.6.1.4.1.529.23.3.1.1.92
Number of retries allowed, if LCP/NCP fails
OBJECT-TYPE    
  INTEGER  

answerProfile-PppAnswer-PppRestartTimer 1.3.6.1.4.1.529.23.3.1.1.93
Initial LCP/NCP restart timer
OBJECT-TYPE    
  INTEGER  

answerProfile-PppAnswer-MaxPppRestartTimer 1.3.6.1.4.1.529.23.3.1.1.94
Maximum LCP/NCP restart timer
OBJECT-TYPE    
  INTEGER  

answerProfile-PriorityAnswer-Enabled 1.3.6.1.4.1.529.23.3.1.1.95
Enable priority classification.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

Defined Objects

DisplayString  
OCTET STRING    

MibanswerProfileEntry  
SEQUENCE    
  INTEGER as answerProfile-Index-o  
  INTEGER as answerProfile-UseAnswerForAllDefaults  
  INTEGER as answerProfile-Force56kbps  
  INTEGER as answerProfile-ProfilesRequired  
  INTEGER as answerProfile-ClidAuthMode  
  INTEGER as answerProfile-ClidSelection  
  DisplayString as answerProfile-CallbackClidPrefix  
  INTEGER as answerProfile-PppAnswer-Enabled  
  INTEGER as answerProfile-PppAnswer-ReceiveAuthMode  
  INTEGER as answerProfile-PppAnswer-BiDirectionalAuth  
  DisplayString as answerProfile-PppAnswer-SubstituteSendName  
  INTEGER as answerProfile-PppAnswer-DisconnectOnAuthTimeout  
  INTEGER as answerProfile-PppAnswer-BridgingGroup  
  INTEGER as answerProfile-PppAnswer-LinkCompression  
  INTEGER as answerProfile-PppAnswer-Mru  
  INTEGER as answerProfile-PppAnswer-Lqm  
  INTEGER as answerProfile-PppAnswer-LqmMinimumPeriod  
  INTEGER as answerProfile-PppAnswer-LqmMaximumPeriod  
  INTEGER as answerProfile-PppAnswer-CbcpEnabled  
  INTEGER as answerProfile-PppAnswer-IpxHeaderCompression  
  INTEGER as answerProfile-PppAnswer-Mtu  
  INTEGER as answerProfile-PppAnswer-AuthForAsyncFramedUsers  
  INTEGER as answerProfile-PppAnswer-MaxPapAuthRetry  
  INTEGER as answerProfile-PppAnswer-MaxPppConfigureRetry  
  INTEGER as answerProfile-PppAnswer-PppRestartTimer  
  INTEGER as answerProfile-PppAnswer-MaxPppRestartTimer  
  INTEGER as answerProfile-MpAnswer-Enabled  
  INTEGER as answerProfile-MpAnswer-MinimumChannels  
  INTEGER as answerProfile-MpAnswer-MaximumChannels  
  INTEGER as answerProfile-MpAnswer-BacpEnable  
  INTEGER as answerProfile-MppAnswer-Enabled  
  INTEGER as answerProfile-MppAnswer-DynamicAlgorithm  
  INTEGER as answerProfile-MppAnswer-BandwidthMonitorDirection  
  INTEGER as answerProfile-MppAnswer-IncrementChannelCount  
  INTEGER as answerProfile-MppAnswer-DecrementChannelCount  
  INTEGER as answerProfile-MppAnswer-SecondsHistory  
  INTEGER as answerProfile-MppAnswer-AddPersistence  
  INTEGER as answerProfile-MppAnswer-SubPersistence  
  INTEGER as answerProfile-MppAnswer-TargetUtilization  
  INTEGER as answerProfile-FrAnswer-Enabled  
  INTEGER as answerProfile-TcpClearAnswer-Enabled  
  INTEGER as answerProfile-AraAnswer-Enabled  
  INTEGER as answerProfile-V120Answer-Enabled  
  INTEGER as answerProfile-V120Answer-FrameLength  
  INTEGER as answerProfile-X25Answer-Enabled  
  DisplayString as answerProfile-X25Answer-X25Profile  
  INTEGER as answerProfile-X25Answer-X3Profile  
  INTEGER as answerProfile-X25Answer-MaxCalls  
  INTEGER as answerProfile-X25Answer-VcTimerEnable  
  DisplayString as answerProfile-X25Answer-AutoCallX121Address  
  INTEGER as answerProfile-X25Answer-ReverseCharge  
  DisplayString as answerProfile-X25Answer-X3CustomProf  
  INTEGER as answerProfile-EuAnswer-EurawEnabled  
  INTEGER as answerProfile-EuAnswer-EuuiEnabled  
  INTEGER as answerProfile-EuAnswer-DceAddr  
  INTEGER as answerProfile-EuAnswer-DteAddr  
  INTEGER as answerProfile-EuAnswer-Mru  
  INTEGER as answerProfile-IpAnswer-Enabled  
  INTEGER as answerProfile-IpAnswer-VjHeaderPrediction  
  INTEGER as answerProfile-IpAnswer-AssignAddress  
  INTEGER as answerProfile-IpAnswer-RoutingMetric  
  INTEGER as answerProfile-IpAnswer-PrivateRouteProfileRequired  
  INTEGER as answerProfile-IpAnswer-PoolForAsyncFramedUser  
  INTEGER as answerProfile-IpxAnswer-Enabled  
  INTEGER as answerProfile-IpxAnswer-PeerMode  
  DisplayString as answerProfile-SessionInfo-CallFilter  
  DisplayString as answerProfile-SessionInfo-DataFilter  
  INTEGER as answerProfile-SessionInfo-FilterPersistence  
  INTEGER as answerProfile-SessionInfo-FilterRequired  
  INTEGER as answerProfile-SessionInfo-IdleTimer  
  INTEGER as answerProfile-SessionInfo-TsIdleMode  
  INTEGER as answerProfile-SessionInfo-TsIdleTimer  
  INTEGER as answerProfile-SessionInfo-MaxCallDuration  
  INTEGER as answerProfile-X75Answer-Enabled  
  INTEGER as answerProfile-X75Answer-KFramesOutstanding  
  INTEGER as answerProfile-X75Answer-N2Retransmissions  
  INTEGER as answerProfile-X75Answer-T1RetranTimer  
  INTEGER as answerProfile-X75Answer-FrameLength  
  INTEGER as answerProfile-FramedOnly  
  INTEGER as answerProfile-HdlcNrmAnswer-Enabled  
  INTEGER as answerProfile-Visa2Answer-Enabled  
  INTEGER as answerProfile-AtmAnswer-SvcEnabled  
  INTEGER as answerProfile-PriorityAnswer-Enabled  
  INTEGER as answerProfile-PriorityAnswer-PacketClassification  
  INTEGER as answerProfile-PriorityAnswer-MaxRtpPacketDelay  
  INTEGER as answerProfile-PriorityAnswer-MinimumRtpPort  
  INTEGER as answerProfile-PriorityAnswer-MaximumRtpPort  
  INTEGER as answerProfile-PriorityAnswer-NoHighPrioPktDuration  
  INTEGER as answerProfile-Action-o