
| ASCEND-MIB | RFC1155-SMI | RFC-1212 |
| configuration | IpAddress | OBJECT-TYPE |
| mibcltmCmd | 1.3.6.1.4.1.529.23.66 | ||
| OBJECT IDENTIFIER | |||
| mibcltmCmdTable | 1.3.6.1.4.1.529.23.66.1 | ||
| A list of mibcltmCmd profile entries. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MibcltmCmdEntry | |||
| mibcltmCmdEntry | 1.3.6.1.4.1.529.23.66.1.1 | ||
| A mibcltmCmd entry containing objects that maps to the parameters of mibcltmCmd profile. | |||
| OBJECT-TYPE | |||
| MibcltmCmdEntry | |||
| cltmCmd-Index-o | 1.3.6.1.4.1.529.23.66.1.1.1 | ||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-CltmSlot | 1.3.6.1.4.1.529.23.66.1.1.2 | ||
| Identify the CLTM slot within the system. | |||
| OBJECT-TYPE | |||
| INTEGER | anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17) | ||
| cltmCmd-TestTimeStamp | 1.3.6.1.4.1.529.23.66.1.1.3 | ||
| Value of the sysUpTime when the last test command was issued. This parameter is cleared when any of the test parameters are changed. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-TestSequence | 1.3.6.1.4.1.529.23.66.1.1.4 | ||
| Sequence of the last issued test command. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-TestOperation | 1.3.6.1.4.1.529.23.66.1.1.5 | ||
| The current operation that is active on the CLT Module. Defaultls to 'none'. Set to 'none' to stop the test procedure. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), dmmTest(2), lineInlsTest(3), lineBgnsTest(4), lineSignsTest(5), lineLpresTest(6), lineCldetTest(7), lineImpstartTest(8), lineImpstopTest(9), lineImpreadTest(10), calibTest(11), toneSend(12), toneRecv(13), tdrSet(14), tdrGet(15), cltmReset(16), cltmVersion(17), cltmDownload(18), dmmDcdelTest(19), dmmCapeTest(20), dmmAllTest(21), txCtrlToneTest(22), txTraceToneTest(23), stopToneTest(24), detRingerTest(25), detAturTest(26), btapTest(27), voiceDetTest(28), lineFcllocTest(29), lineShortlocTest(30), setResponderTest(31), setBypassTest(32), splitterDetectTest(33), dmmAcdelTest(34), dmmLbalTest(35), dmmSoakTest(36), sendVoiceTest(37), measVoiceTest(38), measDtaTest(39), detaptorTest(40) | ||
| cltmCmd-DmmType | 1.3.6.1.4.1.529.23.66.1.1.6 | ||
| DMM Measurement Type. | |||
| OBJECT-TYPE | |||
| INTEGER | resistance(1), dcVoltage(2), acVoltage(3), capacitance(4) | ||
| cltmCmd-DmmLead | 1.3.6.1.4.1.529.23.66.1.1.7 | ||
| DMM Measurement Leads. | |||
| OBJECT-TYPE | |||
| INTEGER | tipRing(1), tipSleeve(2), ringSleeve(3) | ||
| cltmCmd-BackgroundNoiseFilter | 1.3.6.1.4.1.529.23.66.1.1.8 | ||
| Line Filter Type for Background Noise Test. | |||
| OBJECT-TYPE | |||
| INTEGER | psd(1), e(2), f(3), g(4) | ||
| cltmCmd-BackgroundNoiseTermination | 1.3.6.1.4.1.529.23.66.1.1.9 | ||
| Line Termination Type for Background Noise Test. | |||
| OBJECT-TYPE | |||
| INTEGER | term100(1), term135(2), bridge100(3), bridge135(4) | ||
| cltmCmd-LoopResistanceUnit | 1.3.6.1.4.1.529.23.66.1.1.10 | ||
| Measurement System for Loop Resistance Test. | |||
| OBJECT-TYPE | |||
| INTEGER | metric(1), english(2) | ||
| cltmCmd-LoopResistanceTemp | 1.3.6.1.4.1.529.23.66.1.1.11 | ||
| Line Temperature for Loop Resistance Test. Assigned in degree celsius/fahrenheit. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-ImpulseNoiseStartThresh | 1.3.6.1.4.1.529.23.66.1.1.12 | ||
| Threshold for Impulse Noise Test. The Range is 50-100 dBrm. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-ImpulseNoiseStartDelta | 1.3.6.1.4.1.529.23.66.1.1.13 | ||
| Delta Value for Impulse Noise Test. The delta range is 2-6 dB | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-ImpulseNoiseStartMaxCount | 1.3.6.1.4.1.529.23.66.1.1.14 | ||
| Max Count for Impulse Noise Test. The range of the value is 1-1999. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-ImpulseNoiseStartDeadTime | 1.3.6.1.4.1.529.23.66.1.1.15 | ||
| Dead Time Value for Impulse Noise Start Test. The value is assigned in 0.1 ms increments. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-ImpulseNoiseStartTimer | 1.3.6.1.4.1.529.23.66.1.1.16 | ||
| Timer values for Impulse Noise Start Test. The value is assigned in 1 minute increment. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-CalibrationType | 1.3.6.1.4.1.529.23.66.1.1.17 | ||
| Calibration Type | |||
| OBJECT-TYPE | |||
| INTEGER | insertionLoss(1), backgroundNoise(2) | ||
| cltmCmd-ToneSendFreq | 1.3.6.1.4.1.529.23.66.1.1.18 | ||
| Tone Send Frequency in KHz. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-ToneSendLevel | 1.3.6.1.4.1.529.23.66.1.1.19 | ||
| Tone Send Level in dBm. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-ToneSendPeriod | 1.3.6.1.4.1.529.23.66.1.1.20 | ||
| Amount of time a tone is sent (1-20 Minutes). | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-TdrUnit | 1.3.6.1.4.1.529.23.66.1.1.21 | ||
| Measurement System for TDR Test. | |||
| OBJECT-TYPE | |||
| INTEGER | metric(1), english(2) | ||
| cltmCmd-TdrGauge | 1.3.6.1.4.1.529.23.66.1.1.22 | ||
| TDR gauge. This is either 22/24/26 AWG for English system or 6/5/4 (0.1mm) for the metric system. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-TdrVp | 1.3.6.1.4.1.529.23.66.1.1.23 | ||
| TDR VP as percentage of the speed of light. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-TdrAvg | 1.3.6.1.4.1.529.23.66.1.1.24 | ||
| Number of trials to get the avarage. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-TdrGetType | 1.3.6.1.4.1.529.23.66.1.1.25 | ||
| TDR Test Range Measurement Type. If set to automatic cltmCmdTdrStartLen and cltmCmdTdrMeasureLen do not need to be set. | |||
| OBJECT-TYPE | |||
| INTEGER | automatic(1), manual(2) | ||
| cltmCmd-TdrStartDistance | 1.3.6.1.4.1.529.23.66.1.1.26 | ||
| TDR Start Length for MANUAL mode, the value is given in feet (15..20000) for the English system and cm (460..609750) for the metric system. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-TdrMeasurementLength | 1.3.6.1.4.1.529.23.66.1.1.27 | ||
| TDR Measurement Length for MANUAL mode, the value is given in feet (300..20000) for the English system and cm (9150..609750) for the metric system. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-DmmdcdPeriod | 1.3.6.1.4.1.529.23.66.1.1.28 | ||
| Amount of time measurement is made (0,1-5 100ms;0=MAX). | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-DmmdcdVoltage | 1.3.6.1.4.1.529.23.66.1.1.29 | ||
| Test voltage to be used (-230 to 230 Volts). | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-DmmdcdImpedance | 1.3.6.1.4.1.529.23.66.1.1.30 | ||
| Output Impedance to be used (10 to 1000 Kohms). | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-DmmcapPeriod | 1.3.6.1.4.1.529.23.66.1.1.31 | ||
| Amount of time measurement is made (0,1-5 100ms;0=MAX). | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-DmmallType | 1.3.6.1.4.1.529.23.66.1.1.32 | ||
| DMM Measurement Type. | |||
| OBJECT-TYPE | |||
| INTEGER | resistance(1), dcVoltage(2), acVoltage(3), capacitance(4) | ||
| cltmCmd-DmmallPeriod | 1.3.6.1.4.1.529.23.66.1.1.33 | ||
| Amount of time measurement is made (0,1-5 100ms;0=MAX). | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-DmmallInputImp | 1.3.6.1.4.1.529.23.66.1.1.34 | ||
| Input Impedance (100, 1000 Kohm). | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-CtoneType | 1.3.6.1.4.1.529.23.66.1.1.35 | ||
| Control tone, type of DSL service (ADSL, GLITE). | |||
| OBJECT-TYPE | |||
| INTEGER | adsl(1), glite(2) | ||
| cltmCmd-CtoneTone | 1.3.6.1.4.1.529.23.66.1.1.36 | ||
| Control tone, type of Tone (QUIET, RESTORE). | |||
| OBJECT-TYPE | |||
| INTEGER | quiet(1), restore(2) | ||
| cltmCmd-TtoneLead | 1.3.6.1.4.1.529.23.66.1.1.37 | ||
| trace tone, Measurement Leads. | |||
| OBJECT-TYPE | |||
| INTEGER | tipRing(1), tipSleeve(2), ringSleeve(3) | ||
| cltmCmd-TtoneLevel | 1.3.6.1.4.1.529.23.66.1.1.38 | ||
| trace tone, Tone Send Level in dBm. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-TtonePeriod | 1.3.6.1.4.1.529.23.66.1.1.39 | ||
| trace tone, Amount of time a tone is sent (1-20 Minutes). | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-BtapStartLength | 1.3.6.1.4.1.529.23.66.1.1.40 | ||
| Measurement start length (15 - 20000 ft. or 5 - 6097 meter). | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-BtapMeasureLength | 1.3.6.1.4.1.529.23.66.1.1.41 | ||
| Measurement length (100 - 20000 ft. or 32 - 6097 meter). | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-Action-o | 1.3.6.1.4.1.529.23.66.1.1.42 | ||
| OBJECT-TYPE | |||
| INTEGER | noAction(1), createProfile(2), deleteProfile(3) | ||
| cltmCmd-FcllocUnit | 1.3.6.1.4.1.529.23.66.1.1.43 | ||
| Measurement System for FCLLOC Test. | |||
| OBJECT-TYPE | |||
| INTEGER | metric(1), english(2) | ||
| cltmCmd-FcllocGauge | 1.3.6.1.4.1.529.23.66.1.1.44 | ||
| FCLLOC gauge. This is either 22/24/26 AWG for English system or 6/5/4 (0.1mm) for the metric system. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-ShortlocUnit | 1.3.6.1.4.1.529.23.66.1.1.45 | ||
| Measurement System for SHORTLOC Test. | |||
| OBJECT-TYPE | |||
| INTEGER | metric(1), english(2) | ||
| cltmCmd-ShortlocGauge | 1.3.6.1.4.1.529.23.66.1.1.46 | ||
| SHORTLOC gauge. This is either 22/24/26 AWG for English system or 6/5/4 (0.1mm) for the metric system. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| cltmCmd-ShortlocType | 1.3.6.1.4.1.529.23.66.1.1.47 | ||
| SHORTLOC test type. | |||
| OBJECT-TYPE | |||
| INTEGER | detect(1), noDetect(2) | ||
| DisplayString | |||
| OCTET STRING | |||
| MibcltmCmdEntry | |||
| SEQUENCE | |||
| INTEGER as cltmCmd-Index-o | |||
| INTEGER as cltmCmd-CltmSlot | |||
| INTEGER as cltmCmd-TestTimeStamp | |||
| INTEGER as cltmCmd-TestSequence | |||
| INTEGER as cltmCmd-TestOperation | |||
| INTEGER as cltmCmd-DmmType | |||
| INTEGER as cltmCmd-DmmLead | |||
| INTEGER as cltmCmd-BackgroundNoiseFilter | |||
| INTEGER as cltmCmd-BackgroundNoiseTermination | |||
| INTEGER as cltmCmd-LoopResistanceUnit | |||
| INTEGER as cltmCmd-LoopResistanceTemp | |||
| INTEGER as cltmCmd-ImpulseNoiseStartThresh | |||
| INTEGER as cltmCmd-ImpulseNoiseStartDelta | |||
| INTEGER as cltmCmd-ImpulseNoiseStartMaxCount | |||
| INTEGER as cltmCmd-ImpulseNoiseStartDeadTime | |||
| INTEGER as cltmCmd-ImpulseNoiseStartTimer | |||
| INTEGER as cltmCmd-CalibrationType | |||
| INTEGER as cltmCmd-ToneSendFreq | |||
| INTEGER as cltmCmd-ToneSendLevel | |||
| INTEGER as cltmCmd-ToneSendPeriod | |||
| INTEGER as cltmCmd-TdrUnit | |||
| INTEGER as cltmCmd-TdrGauge | |||
| INTEGER as cltmCmd-TdrVp | |||
| INTEGER as cltmCmd-TdrAvg | |||
| INTEGER as cltmCmd-TdrGetType | |||
| INTEGER as cltmCmd-TdrStartDistance | |||
| INTEGER as cltmCmd-TdrMeasurementLength | |||
| INTEGER as cltmCmd-DmmdcdPeriod | |||
| INTEGER as cltmCmd-DmmdcdVoltage | |||
| INTEGER as cltmCmd-DmmdcdImpedance | |||
| INTEGER as cltmCmd-DmmcapPeriod | |||
| INTEGER as cltmCmd-DmmallType | |||
| INTEGER as cltmCmd-DmmallPeriod | |||
| INTEGER as cltmCmd-DmmallInputImp | |||
| INTEGER as cltmCmd-CtoneType | |||
| INTEGER as cltmCmd-CtoneTone | |||
| INTEGER as cltmCmd-TtoneLead | |||
| INTEGER as cltmCmd-TtoneLevel | |||
| INTEGER as cltmCmd-TtonePeriod | |||
| INTEGER as cltmCmd-BtapStartLength | |||
| INTEGER as cltmCmd-BtapMeasureLength | |||
| INTEGER as cltmCmd-FcllocUnit | |||
| INTEGER as cltmCmd-FcllocGauge | |||
| INTEGER as cltmCmd-ShortlocUnit | |||
| INTEGER as cltmCmd-ShortlocGauge | |||
| INTEGER as cltmCmd-ShortlocType | |||
| INTEGER as cltmCmd-Action-o | |||