ASCEND-MIBDS1ATMNET-MIB

File: ASCEND-MIBDS1ATMNET-MIB.mib (19164 bytes)

Imported modules

ASCEND-MIB RFC1155-SMI RFC-1212

Imported symbols

configuration IpAddress OBJECT-TYPE

Defined Objects

mibds1AtmNetworkProfile 1.3.6.1.4.1.529.23.25
OBJECT IDENTIFIER    

mibds1AtmNetworkProfileTable 1.3.6.1.4.1.529.23.25.1
A list of mibds1AtmNetworkProfile profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Mibds1AtmNetworkProfileEntry

mibds1AtmNetworkProfileEntry 1.3.6.1.4.1.529.23.25.1.1
A mibds1AtmNetworkProfile entry containing objects that maps to the parameters of mibds1AtmNetworkProfile profile.
OBJECT-TYPE    
  Mibds1AtmNetworkProfileEntry  

ds1AtmNetworkProfile-Shelf-o 1.3.6.1.4.1.529.23.25.1.1.1
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-Slot-o 1.3.6.1.4.1.529.23.25.1.1.2
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-Item-o 1.3.6.1.4.1.529.23.25.1.1.3
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-Name 1.3.6.1.4.1.529.23.25.1.1.4
Name of IMA Line Config profile.
OBJECT-TYPE    
  DisplayString  

ds1AtmNetworkProfile-PhysicalAddress-Shelf 1.3.6.1.4.1.529.23.25.1.1.5
The number of the shelf that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anyShelf(1), shelf1(2), shelf2(3), shelf3(4), shelf4(5), shelf5(6), shelf6(7), shelf7(8), shelf8(9), shelf9(10)  

ds1AtmNetworkProfile-PhysicalAddress-Slot 1.3.6.1.4.1.529.23.25.1.1.6
The number of the slot that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17), slot17(18), slot18(19), slot19(20), slot20(21), slot21(22), slot22(23), slot23(24), slot24(25), slot25(26), slot26(27), slot27(28), slot28(29), slot29(30), slot30(31), slot31(32), slot32(33), slot33(34), slot34(35), slot35(36), slot36(37), slot37(38), slot38(39), slot39(40), slot40(41), aLim(55), bLim(56), cLim(57), dLim(58), leftController(49), rightController(50), controller(42), firstControlModule(53), secondControlModule(54), trunkModule1(45), trunkModule2(46), controlModule(51), slotPrimary(59)  

ds1AtmNetworkProfile-PhysicalAddress-ItemNumber 1.3.6.1.4.1.529.23.25.1.1.7
A number that specifies an addressable entity within the context of shelf and slot.
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-Enabled 1.3.6.1.4.1.529.23.25.1.1.8
TRUE if the line is enabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ds1AtmNetworkProfile-LineConfig-FrameType 1.3.6.1.4.1.529.23.25.1.1.9
The super-framing mode that is used on the physical link(s).
OBJECT-TYPE    
  INTEGER d4(1), esf(2), g703(3), n-2ds(4)  

ds1AtmNetworkProfile-LineConfig-Encoding 1.3.6.1.4.1.529.23.25.1.1.10
The layer 1 line encoding used for the physical link(s).
OBJECT-TYPE    
  INTEGER ami(1), b8zs(2), hdb3(3), none(4)  

ds1AtmNetworkProfile-LineConfig-NailedGroup 1.3.6.1.4.1.529.23.25.1.1.11
The group index to which this link belongs to
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-LineConfig-Loopback 1.3.6.1.4.1.529.23.25.1.1.12
Loopback mode.
OBJECT-TYPE    
  INTEGER noLoopback(1), feLoopback(2), lineLoopback(3), remoteLoopback(4), localLoopback(5)  

ds1AtmNetworkProfile-LineConfig-ClockSource 1.3.6.1.4.1.529.23.25.1.1.13
OBJECT-TYPE    
  INTEGER eligible(1), notEligible(2)  

ds1AtmNetworkProfile-LineConfig-ClockPriority 1.3.6.1.4.1.529.23.25.1.1.14
Clock priority assigned to the T1 line. Used to select particular lines as clock source.
OBJECT-TYPE    
  INTEGER highPriority(2), middlePriority(3), lowPriority(4)  

ds1AtmNetworkProfile-LineConfig-oFDL 1.3.6.1.4.1.529.23.25.1.1.15
Who's FDL are we using. Used only if frame-type is ESF - Ignored otherwise.
OBJECT-TYPE    
  INTEGER none(1), atNT(2), ansi(3), sprint(4)  

ds1AtmNetworkProfile-LineConfig-FrontEndType 1.3.6.1.4.1.529.23.25.1.1.16
The front end type of the transceiver.
OBJECT-TYPE    
  INTEGER shortHaul(1), longHaul(2)  

ds1AtmNetworkProfile-LineConfig-PcmMode 1.3.6.1.4.1.529.23.25.1.1.18
Number of active channels: in PCM highway
OBJECT-TYPE    
  INTEGER isdn(24), clearChannel(25)  

ds1AtmNetworkProfile-LineConfig-CosetEnabled 1.3.6.1.4.1.529.23.25.1.1.19
Selecting yes signifies that the ATM Forum polynomial (coset polynomial) be added to HEC before the HEC verification of a received cell. In the transmit direction, this selection enables generation of a HEC with the coset polynomial value. Selecting no signifies that the ATM Forum polynomial (coset polynomial) *not* be added to HEC before HEC verification of a received cell. In the transmit direction, selecting no enables generation of a HEC without the coset polynomial value.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ds1AtmNetworkProfile-LineConfig-ScramblingEnabled 1.3.6.1.4.1.529.23.25.1.1.20
Selecting 'yes' enables the descrambling of received cells on the link. The payload of transmitted cells is scrambled. Selecting 'no' disables the descrambling of received cells on the link. The payload of transmitted cells is not scrambled.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ds1AtmNetworkProfile-LineConfig-HecCorrectionEnabled 1.3.6.1.4.1.529.23.25.1.1.21
Selecting 'yes' enables correction of cells received with a single-bit error in the HEC. Selecting 'no' disables correction of cells received with a single-bit error in the HEC.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ds1AtmNetworkProfile-LineConfig-VpSwitchingVpi 1.3.6.1.4.1.529.23.25.1.1.22
The Vpi to be used for the VP switching. Rest of the valid VPIs in valid vpi-vci-range will be used for the VC switching. Changes in this range will take effect immediately. THE USER SHOULD BE VERY CAREFUL WHILE CHANGING THIS VALUE BECAUSE ALL CONNECTIONS ON THE LIM WHERE THIS PORT BELONGS WILL BE DROPPED IN ORDER TO MAKE THIS NEW VALUE EFFECTIVE IMMEDIATELY. Valid only when the port is in UNI mode
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-NeTxLid 1.3.6.1.4.1.529.23.25.1.1.23
Transmit LID for the link
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-AddLinkCondTime 1.3.6.1.4.1.529.23.25.1.1.24
Link conditioning timeout during link addition/insertion. Time in seconds
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-LinkRecoveryType 1.3.6.1.4.1.529.23.25.1.1.25
Type of link recovery
OBJECT-TYPE    
  INTEGER manual(2), slow(3), fast(4)  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-FaultClearingType 1.3.6.1.4.1.529.23.25.1.1.26
Auto/Manual
OBJECT-TYPE    
  INTEGER manual(2), auto(3)  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-FaultClearingTime 1.3.6.1.4.1.529.23.25.1.1.27
Time after which fault is cleared if fault-clearing-type set to auto
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-Priority 1.3.6.1.4.1.529.23.25.1.1.28
Priority defined for TRL, automatically select highest priority link to become the TRL (maybe we can deduct this from the t1ClockSource priority
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-AddLinkCondTime 1.3.6.1.4.1.529.23.25.1.1.29
Link conditioning timeout during link addition/insertion. Time in seconds
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-LinkRecoveryType 1.3.6.1.4.1.529.23.25.1.1.30
Type of link recovery
OBJECT-TYPE    
  INTEGER manual(2), slow(3), fast(4)  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-RecLinkCondTime 1.3.6.1.4.1.529.23.25.1.1.31
Link conditioning timeout during link recovery,
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-RxLidLearningTime 1.3.6.1.4.1.529.23.25.1.1.32
Time to learn RX LID (in ICP cells)
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-FaultClearingType 1.3.6.1.4.1.529.23.25.1.1.33
Auto/Manual
OBJECT-TYPE    
  INTEGER manual(2), auto(3)  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-FaultClearingTime 1.3.6.1.4.1.529.23.25.1.1.34
Time after which fault is cleared if fault-clearing-type set to auto
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-InDefectIntTime 1.3.6.1.4.1.529.23.25.1.1.35
Time in milliseconds, if the defect is persistent for this time, the Rx Failed state machine enters the FAILED state
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-OutDefectIntTime 1.3.6.1.4.1.529.23.25.1.1.36
Time in milliseconds, if the no defect condition persists for this time, the Rx Failed state machine leaves the FAILED state
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-DefectRatio 1.3.6.1.4.1.529.23.25.1.1.37
Defect to No Defect ratio
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-Action-o 1.3.6.1.4.1.529.23.25.1.1.38
OBJECT-TYPE    
  INTEGER noAction(1), createProfile(2), deleteProfile(3)  

ds1AtmNetworkProfile-LineConfig-LineLength 1.3.6.1.4.1.529.23.25.1.1.39
The length of the physical line (for short haul lines).
OBJECT-TYPE    
  INTEGER n-1133(1), n-134266(2), n-267399(3), n-400533(4), n-534655(5)  

ds1AtmNetworkProfile-LineConfig-LineBuildOut 1.3.6.1.4.1.529.23.25.1.1.40
Line buildout value for CSU lines.
OBJECT-TYPE    
  INTEGER n-0Db(1), n-75Db(2), n-15Db(3), n-2255Db(4)  

ds1AtmNetworkProfile-SparingMode 1.3.6.1.4.1.529.23.25.1.1.41
Port sparing operational mode for this port.
OBJECT-TYPE    
  INTEGER inactive(1), manual(2), automatic(3)  

ds1AtmNetworkProfile-IgnoreLineup 1.3.6.1.4.1.529.23.25.1.1.42
Ignore line up value for this port.
OBJECT-TYPE    
  INTEGER systemDefined(1), no(2), yes(3)  

ds1AtmNetworkProfile-LineConfig-SendCode 1.3.6.1.4.1.529.23.25.1.1.43
The type of code to be sent across the DS1 interface.
OBJECT-TYPE    
  INTEGER noCode(1), lineCode(2), payloadCode(3), inbandloopCode(14), resetCode(4), qrsCode(5), n-511Pattern(6), n-3In24Pattern(7), n-1In16Pattern(8), allOnesPattern(9), allZerosPattern(10), altOnesZerosPattern(11), dblAltOnesZerosPattern(12), n-2Pow20Pattern(13)  

ds1AtmNetworkProfile-LineConfig-StatusChangeTrapEnable 1.3.6.1.4.1.529.23.25.1.1.44
When set to yes, a line status change trap is sent. NOTE: when the line status change results from a higher level line status change, i.e., ds3, then no trap for the ds1 are sent. The default setting is No.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

Defined Objects

DisplayString  
OCTET STRING    

Mibds1AtmNetworkProfileEntry  
SEQUENCE    
  INTEGER as ds1AtmNetworkProfile-Shelf-o  
  INTEGER as ds1AtmNetworkProfile-Slot-o  
  INTEGER as ds1AtmNetworkProfile-Item-o  
  DisplayString as ds1AtmNetworkProfile-Name  
  INTEGER as ds1AtmNetworkProfile-PhysicalAddress-Shelf  
  INTEGER as ds1AtmNetworkProfile-PhysicalAddress-Slot  
  INTEGER as ds1AtmNetworkProfile-PhysicalAddress-ItemNumber  
  INTEGER as ds1AtmNetworkProfile-Enabled  
  INTEGER as ds1AtmNetworkProfile-SparingMode  
  INTEGER as ds1AtmNetworkProfile-IgnoreLineup  
  INTEGER as ds1AtmNetworkProfile-LineConfig-FrameType  
  INTEGER as ds1AtmNetworkProfile-LineConfig-Encoding  
  INTEGER as ds1AtmNetworkProfile-LineConfig-NailedGroup  
  INTEGER as ds1AtmNetworkProfile-LineConfig-Loopback  
  INTEGER as ds1AtmNetworkProfile-LineConfig-ClockSource  
  INTEGER as ds1AtmNetworkProfile-LineConfig-ClockPriority  
  INTEGER as ds1AtmNetworkProfile-LineConfig-oFDL  
  INTEGER as ds1AtmNetworkProfile-LineConfig-SendCode  
  INTEGER as ds1AtmNetworkProfile-LineConfig-FrontEndType  
  INTEGER as ds1AtmNetworkProfile-LineConfig-LineLength  
  INTEGER as ds1AtmNetworkProfile-LineConfig-LineBuildOut  
  INTEGER as ds1AtmNetworkProfile-LineConfig-PcmMode  
  INTEGER as ds1AtmNetworkProfile-LineConfig-CosetEnabled  
  INTEGER as ds1AtmNetworkProfile-LineConfig-ScramblingEnabled  
  INTEGER as ds1AtmNetworkProfile-LineConfig-HecCorrectionEnabled  
  INTEGER as ds1AtmNetworkProfile-LineConfig-VpSwitchingVpi  
  INTEGER as ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-NeTxLid  
  INTEGER as ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-AddLinkCondTime  
  INTEGER as ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-LinkRecoveryType  
  INTEGER as ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-FaultClearingType  
  INTEGER as ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-FaultClearingTime  
  INTEGER as ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-Priority  
  INTEGER as ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-AddLinkCondTime  
  INTEGER as ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-LinkRecoveryType  
  INTEGER as ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-RecLinkCondTime  
  INTEGER as ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-RxLidLearningTime  
  INTEGER as ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-FaultClearingType  
  INTEGER as ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-FaultClearingTime  
  INTEGER as ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-InDefectIntTime  
  INTEGER as ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-OutDefectIntTime  
  INTEGER as ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-DefectRatio  
  INTEGER as ds1AtmNetworkProfile-LineConfig-StatusChangeTrapEnable  
  INTEGER as ds1AtmNetworkProfile-Action-o