ASCEND-MIBDS3ATMNET-MIB

File: ASCEND-MIBDS3ATMNET-MIB.mib (27390 bytes)

Imported modules

ASCEND-MIB RFC1155-SMI RFC-1212

Imported symbols

configuration IpAddress OBJECT-TYPE

Defined Objects

mibds3AtmNetworkProfile 1.3.6.1.4.1.529.23.13
OBJECT IDENTIFIER    

mibds3AtmNetworkProfileTable 1.3.6.1.4.1.529.23.13.1
A list of mibds3AtmNetworkProfile profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Mibds3AtmNetworkProfileEntry

mibds3AtmNetworkProfileEntry 1.3.6.1.4.1.529.23.13.1.1
A mibds3AtmNetworkProfile entry containing objects that maps to the parameters of mibds3AtmNetworkProfile profile.
OBJECT-TYPE    
  Mibds3AtmNetworkProfileEntry  

ds3AtmNetworkProfile-Shelf-o 1.3.6.1.4.1.529.23.13.1.1.1
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-Slot-o 1.3.6.1.4.1.529.23.13.1.1.2
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-Item-o 1.3.6.1.4.1.529.23.13.1.1.3
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-Name 1.3.6.1.4.1.529.23.13.1.1.4
For future use. The current design does not use the name field but instead references Ds3Atm lines by the physical address; we may in the future support referencing Ds3Atm lines by name as well as by address. The name consists of a null terminated ascii string supplied by the user; it defaults to the ascii form of the Ds3Atm line physical address.
OBJECT-TYPE    
  DisplayString  

ds3AtmNetworkProfile-PhysicalAddress-Shelf 1.3.6.1.4.1.529.23.13.1.1.5
The number of the shelf that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anyShelf(1), shelf1(2), shelf2(3), shelf3(4), shelf4(5), shelf5(6), shelf6(7), shelf7(8), shelf8(9), shelf9(10)  

ds3AtmNetworkProfile-PhysicalAddress-Slot 1.3.6.1.4.1.529.23.13.1.1.6
The number of the slot that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17), slot17(18), slot18(19), slot19(20), slot20(21), slot21(22), slot22(23), slot23(24), slot24(25), slot25(26), slot26(27), slot27(28), slot28(29), slot29(30), slot30(31), slot31(32), slot32(33), slot33(34), slot34(35), slot35(36), slot36(37), slot37(38), slot38(39), slot39(40), slot40(41), aLim(55), bLim(56), cLim(57), dLim(58), leftController(49), rightController(50), controller(42), firstControlModule(53), secondControlModule(54), trunkModule1(45), trunkModule2(46), controlModule(51), slotPrimary(59)  

ds3AtmNetworkProfile-PhysicalAddress-ItemNumber 1.3.6.1.4.1.529.23.13.1.1.7
A number that specifies an addressable entity within the context of shelf and slot.
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-Enabled 1.3.6.1.4.1.529.23.13.1.1.8
TRUE if the line is enabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ds3AtmNetworkProfile-SparePhysicalAddress-Shelf 1.3.6.1.4.1.529.23.13.1.1.9
The number of the shelf that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anyShelf(1), shelf1(2), shelf2(3), shelf3(4), shelf4(5), shelf5(6), shelf6(7), shelf7(8), shelf8(9), shelf9(10)  

ds3AtmNetworkProfile-SparePhysicalAddress-Slot 1.3.6.1.4.1.529.23.13.1.1.10
The number of the slot that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17), slot17(18), slot18(19), slot19(20), slot20(21), slot21(22), slot22(23), slot23(24), slot24(25), slot25(26), slot26(27), slot27(28), slot28(29), slot29(30), slot30(31), slot31(32), slot32(33), slot33(34), slot34(35), slot35(36), slot36(37), slot37(38), slot38(39), slot39(40), slot40(41), aLim(55), bLim(56), cLim(57), dLim(58), leftController(49), rightController(50), controller(42), firstControlModule(53), secondControlModule(54), trunkModule1(45), trunkModule2(46), controlModule(51), slotPrimary(59)  

ds3AtmNetworkProfile-SparePhysicalAddress-ItemNumber 1.3.6.1.4.1.529.23.13.1.1.11
A number that specifies an addressable entity within the context of shelf and slot.
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-SparingMode 1.3.6.1.4.1.529.23.13.1.1.12
Trunk port sparing operational mode for this port.
OBJECT-TYPE    
  INTEGER inactive(1), manual(2), automatic(3)  

ds3AtmNetworkProfile-ProfileNumber 1.3.6.1.4.1.529.23.13.1.1.13
For potential backwards compatibility. The current design consists of one line profile numbered 0.
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-LineConfig-TrunkGroup 1.3.6.1.4.1.529.23.13.1.1.14
The trunk group to which this line is assigned. 0 means this line is not part of a trunk group.
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-LineConfig-NailedGroup 1.3.6.1.4.1.529.23.13.1.1.15
A number that identifies the set of lines that makes up a nailed group. 0 means this line is not part of a nailed group.
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-LineConfig-RoutePort-SlotNumber-SlotNumber 1.3.6.1.4.1.529.23.13.1.1.16
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-LineConfig-RoutePort-SlotNumber-ShelfNumber 1.3.6.1.4.1.529.23.13.1.1.17
TNT is a multi shelf system. To minimise the changes required to existing code the shelf number is added to this structure as it will almost always be needed when a slot number is needed.
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-LineConfig-RoutePort-RelativePortNumber-RelativePortNumber 1.3.6.1.4.1.529.23.13.1.1.18
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-LineConfig-Activation 1.3.6.1.4.1.529.23.13.1.1.19
Line activation mode.
OBJECT-TYPE    
  INTEGER static(1), dsrActive(2), dcdDsrActive(3)  

ds3AtmNetworkProfile-LineConfig-Loopback 1.3.6.1.4.1.529.23.13.1.1.23
Loopback mode.
OBJECT-TYPE    
  INTEGER noLoopback(1), facilityLoopback(2), localLoopback(3)  

ds3AtmNetworkProfile-LineConfig-HighTxOutput 1.3.6.1.4.1.529.23.13.1.1.24
TRUE if the DS3 cable length is more than 225 ft, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ds3AtmNetworkProfile-LineConfig-FramerMode 1.3.6.1.4.1.529.23.13.1.1.25
The DS3 ATM framer mode.
OBJECT-TYPE    
  INTEGER cBitADM(1), cBITPLCP(2), cBitAdmLoopTimed(3), cBitPlcpLoopTimed(4), cBitAdmFrameLocked(5), cBitPlcpFrameLocked(6)  

ds3AtmNetworkProfile-LineConfig-VpiVciRange 1.3.6.1.4.1.529.23.13.1.1.26
The DS3 ATM valid VPI/VCI value range.
OBJECT-TYPE    
  INTEGER n-01-3232767(1), n-03-3216383(2), n-07-328191(3), n-015-324095(4), n-031-322047(5), n-063-321023(6), n-0127-32511(7), n-0255-32255(8), vpi0255Vci32255(9), vpi0255Vci32511(10), vpi0255Vci321023(11), vpi0255Vci322047(12), vpi0255Vci324095(13), vpi0255Vci328191(14), vpi0255Vci3216383(15)  

ds3AtmNetworkProfile-LineConfig-ClockSource 1.3.6.1.4.1.529.23.13.1.1.27
Determine whether the 8KHz clock from the DS3-ATM board is eligible to be used as the system-wide TDM clock source.
OBJECT-TYPE    
  INTEGER eligible(1), notEligible(2)  

ds3AtmNetworkProfile-LineConfig-ClockPriority 1.3.6.1.4.1.529.23.13.1.1.28
Clock priority assigned to the DS3-ATM line. Used to select a particular DS3 line as clock source.
OBJECT-TYPE    
  INTEGER highPriority(2), middlePriority(3), lowPriority(4)  

ds3AtmNetworkProfile-LineConfig-CellPayloadScramble 1.3.6.1.4.1.529.23.13.1.1.29
TRUE if the cell payload scrambling is enabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ds3AtmNetworkProfile-Action-o 1.3.6.1.4.1.529.23.13.1.1.30
OBJECT-TYPE    
  INTEGER noAction(1), createProfile(2), deleteProfile(3)  

ds3AtmNetworkProfile-LineConfig-ReceiveEqualization 1.3.6.1.4.1.529.23.13.1.1.31
TRUE if receive equalization is needed, otherwise FALSE. Receive equalization is needed if the cable length is more than 450 ft.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ds3AtmNetworkProfile-IgnoreLineup 1.3.6.1.4.1.529.23.13.1.1.32
Ignore line up value for this port.
OBJECT-TYPE    
  INTEGER systemDefined(1), no(2), yes(3)  

ds3AtmNetworkProfile-LineConfig-StatusChangeTrapEnable 1.3.6.1.4.1.529.23.13.1.1.33
When set to No, do not send dsx3LineStatusChangeTrapEnable trap. If Yes, send traps. The default is No.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

mibds3AtmNetworkProfile-LineConfig-TrafficShapersTable 1.3.6.1.4.1.529.23.13.2
A list of mibds3AtmNetworkProfile__line_config__traffic_shapers profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Mibds3AtmNetworkProfile-LineConfig-TrafficShapersEntry

mibds3AtmNetworkProfile-LineConfig-TrafficShapersEntry 1.3.6.1.4.1.529.23.13.2.1
A mibds3AtmNetworkProfile__line_config__traffic_shapers entry containing objects that maps to the parameters of mibds3AtmNetworkProfile__line_config__traffic_shapers profile.
OBJECT-TYPE    
  Mibds3AtmNetworkProfile-LineConfig-TrafficShapersEntry  

ds3AtmNetworkProfile-LineConfig-TrafficShapers-Shelf-o 1.3.6.1.4.1.529.23.13.2.1.1
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-LineConfig-TrafficShapers-Slot-o 1.3.6.1.4.1.529.23.13.2.1.2
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-LineConfig-TrafficShapers-Item-o 1.3.6.1.4.1.529.23.13.2.1.3
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-LineConfig-TrafficShapers-Index-o 1.3.6.1.4.1.529.23.13.2.1.4
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-LineConfig-TrafficShapers-Enabled 1.3.6.1.4.1.529.23.13.2.1.5
TRUE if the shaper is enabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ds3AtmNetworkProfile-LineConfig-TrafficShapers-BitRate 1.3.6.1.4.1.529.23.13.2.1.6
What is the sustained rate in Kilobits per second that can be transmitted by the VC(s) when using this shaper. Limited by the framer mode and the interface type.
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-LineConfig-TrafficShapers-PeakRate 1.3.6.1.4.1.529.23.13.2.1.7
What is the peak rate in Kilobits per second that can be transmitted by the VC(s) when using this shaper. Limited by the framer mode and the interface type.
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-LineConfig-TrafficShapers-MaxBurstSize 1.3.6.1.4.1.529.23.13.2.1.8
What is the maximum burst size in cell that can be transmitted during the peak rate by the VC(s) when using this shaper.
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-LineConfig-TrafficShapers-Aggregate 1.3.6.1.4.1.529.23.13.2.1.9
If FALSE each individual VC gets the bit rate that is assigned to this shaper. If TRUE the VCs share the bit rate that is assigned to this shaper equally.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ds3AtmNetworkProfile-LineConfig-TrafficShapers-Priority 1.3.6.1.4.1.529.23.13.2.1.10
A number that represent the prioriy of the shaper in respect to other shapers. 0 is the highest priority and 15 is the lowest.
OBJECT-TYPE    
  INTEGER  

mibds3AtmNetworkProfile-LineConfig-IncomingVCCsTable 1.3.6.1.4.1.529.23.13.3
A list of mibds3AtmNetworkProfile__line_config__incomingVCCs profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Mibds3AtmNetworkProfile-LineConfig-IncomingVCCsEntry

mibds3AtmNetworkProfile-LineConfig-IncomingVCCsEntry 1.3.6.1.4.1.529.23.13.3.1
A mibds3AtmNetworkProfile__line_config__incomingVCCs entry containing objects that maps to the parameters of mibds3AtmNetworkProfile__line_config__incomingVCCs profile.
OBJECT-TYPE    
  Mibds3AtmNetworkProfile-LineConfig-IncomingVCCsEntry  

ds3AtmNetworkProfile-LineConfig-IncomingVCCs-Shelf-o 1.3.6.1.4.1.529.23.13.3.1.1
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-LineConfig-IncomingVCCs-Slot-o 1.3.6.1.4.1.529.23.13.3.1.2
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-LineConfig-IncomingVCCs-Item-o 1.3.6.1.4.1.529.23.13.3.1.3
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-LineConfig-IncomingVCCs-Index-o 1.3.6.1.4.1.529.23.13.3.1.4
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-LineConfig-IncomingVCCs-Enabled 1.3.6.1.4.1.529.23.13.3.1.5
TRUE if the item is enabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ds3AtmNetworkProfile-LineConfig-IncomingVCCs-Vpi 1.3.6.1.4.1.529.23.13.3.1.6
A number that identifies the Virtual Path Identifier of this item.
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-LineConfig-IncomingVCCs-StartVci 1.3.6.1.4.1.529.23.13.3.1.7
A number that identifies the starting Virtual Channel Identifier of this item.
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-LineConfig-IncomingVCCs-EndVci 1.3.6.1.4.1.529.23.13.3.1.8
A number that identifies the ending Virtual Channel Identifier of this item.
OBJECT-TYPE    
  INTEGER  

mibds3AtmNetworkProfile-LineConfig-VcSwitchingVpiTable 1.3.6.1.4.1.529.23.13.4
A list of mibds3AtmNetworkProfile__line_config__vc_switching_vpi profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Mibds3AtmNetworkProfile-LineConfig-VcSwitchingVpiEntry

mibds3AtmNetworkProfile-LineConfig-VcSwitchingVpiEntry 1.3.6.1.4.1.529.23.13.4.1
A mibds3AtmNetworkProfile__line_config__vc_switching_vpi entry containing objects that maps to the parameters of mibds3AtmNetworkProfile__line_config__vc_switching_vpi profile.
OBJECT-TYPE    
  Mibds3AtmNetworkProfile-LineConfig-VcSwitchingVpiEntry  

ds3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Shelf-o 1.3.6.1.4.1.529.23.13.4.1.1
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Slot-o 1.3.6.1.4.1.529.23.13.4.1.2
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Item-o 1.3.6.1.4.1.529.23.13.4.1.3
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Index-o 1.3.6.1.4.1.529.23.13.4.1.4
OBJECT-TYPE    
  INTEGER  

ds3AtmNetworkProfile-LineConfig-VcSwitchingVpi 1.3.6.1.4.1.529.23.13.4.1.5
VPI(s) to be used for the VC switching (VCC). It should always contain VPI 0 for VC switching. All VC switching VPI have similar valid VCI range which is determined by 'vpi-vci-range' attribute. Rest of the VPIs will be used for the VP switching. The user needs to understand that adding a VPI in a list of VC switching VPI will allocate more VCCs for this port. The user needs to make sure that VCCs for the other ports have been reduced to accommodate increase in VCC for this port because system can support only 32k VCCs on all trunk ports combined. If vci-range is 4k and VPI 0 is the only VPI doing VC switching for this port than this port occupies 4k VCCs. If user adds VPI 1 to the list of VPIs to do VCC then total 8k VCCs are occupied for this port. System will reject the configuration if user tries to use more than 32k VCCs for all trunk ports combined. ANY CHANGES IN A LIST OF VPIs WILL BE EFFECTIVE IMMEDIATLY. IN ORDER TO DO THAT ALL CONNECTIONS WITHIN THIS SYSTEM WILL BE DROPPED AND REESTABLISHED.
OBJECT-TYPE    
  INTEGER  

Defined Objects

DisplayString  
OCTET STRING    

Mibds3AtmNetworkProfileEntry  
SEQUENCE    
  INTEGER as ds3AtmNetworkProfile-Shelf-o  
  INTEGER as ds3AtmNetworkProfile-Slot-o  
  INTEGER as ds3AtmNetworkProfile-Item-o  
  DisplayString as ds3AtmNetworkProfile-Name  
  INTEGER as ds3AtmNetworkProfile-PhysicalAddress-Shelf  
  INTEGER as ds3AtmNetworkProfile-PhysicalAddress-Slot  
  INTEGER as ds3AtmNetworkProfile-PhysicalAddress-ItemNumber  
  INTEGER as ds3AtmNetworkProfile-Enabled  
  INTEGER as ds3AtmNetworkProfile-SparePhysicalAddress-Shelf  
  INTEGER as ds3AtmNetworkProfile-SparePhysicalAddress-Slot  
  INTEGER as ds3AtmNetworkProfile-SparePhysicalAddress-ItemNumber  
  INTEGER as ds3AtmNetworkProfile-SparingMode  
  INTEGER as ds3AtmNetworkProfile-ProfileNumber  
  INTEGER as ds3AtmNetworkProfile-IgnoreLineup  
  INTEGER as ds3AtmNetworkProfile-LineConfig-TrunkGroup  
  INTEGER as ds3AtmNetworkProfile-LineConfig-NailedGroup  
  INTEGER as ds3AtmNetworkProfile-LineConfig-RoutePort-SlotNumber-SlotNumber  
  INTEGER as ds3AtmNetworkProfile-LineConfig-RoutePort-SlotNumber-ShelfNumber  
  INTEGER as ds3AtmNetworkProfile-LineConfig-RoutePort-RelativePortNumber-RelativePortNumber  
  INTEGER as ds3AtmNetworkProfile-LineConfig-Activation  
  INTEGER as ds3AtmNetworkProfile-LineConfig-Loopback  
  INTEGER as ds3AtmNetworkProfile-LineConfig-HighTxOutput  
  INTEGER as ds3AtmNetworkProfile-LineConfig-ReceiveEqualization  
  INTEGER as ds3AtmNetworkProfile-LineConfig-FramerMode  
  INTEGER as ds3AtmNetworkProfile-LineConfig-VpiVciRange  
  INTEGER as ds3AtmNetworkProfile-LineConfig-ClockSource  
  INTEGER as ds3AtmNetworkProfile-LineConfig-ClockPriority  
  INTEGER as ds3AtmNetworkProfile-LineConfig-CellPayloadScramble  
  INTEGER as ds3AtmNetworkProfile-LineConfig-StatusChangeTrapEnable  
  INTEGER as ds3AtmNetworkProfile-Action-o  

Mibds3AtmNetworkProfile-LineConfig-TrafficShapersEntry  
SEQUENCE    
  INTEGER as ds3AtmNetworkProfile-LineConfig-TrafficShapers-Shelf-o  
  INTEGER as ds3AtmNetworkProfile-LineConfig-TrafficShapers-Slot-o  
  INTEGER as ds3AtmNetworkProfile-LineConfig-TrafficShapers-Item-o  
  INTEGER as ds3AtmNetworkProfile-LineConfig-TrafficShapers-Index-o  
  INTEGER as ds3AtmNetworkProfile-LineConfig-TrafficShapers-Enabled  
  INTEGER as ds3AtmNetworkProfile-LineConfig-TrafficShapers-BitRate  
  INTEGER as ds3AtmNetworkProfile-LineConfig-TrafficShapers-PeakRate  
  INTEGER as ds3AtmNetworkProfile-LineConfig-TrafficShapers-MaxBurstSize  
  INTEGER as ds3AtmNetworkProfile-LineConfig-TrafficShapers-Aggregate  
  INTEGER as ds3AtmNetworkProfile-LineConfig-TrafficShapers-Priority  

Mibds3AtmNetworkProfile-LineConfig-IncomingVCCsEntry  
SEQUENCE    
  INTEGER as ds3AtmNetworkProfile-LineConfig-IncomingVCCs-Shelf-o  
  INTEGER as ds3AtmNetworkProfile-LineConfig-IncomingVCCs-Slot-o  
  INTEGER as ds3AtmNetworkProfile-LineConfig-IncomingVCCs-Item-o  
  INTEGER as ds3AtmNetworkProfile-LineConfig-IncomingVCCs-Index-o  
  INTEGER as ds3AtmNetworkProfile-LineConfig-IncomingVCCs-Enabled  
  INTEGER as ds3AtmNetworkProfile-LineConfig-IncomingVCCs-Vpi  
  INTEGER as ds3AtmNetworkProfile-LineConfig-IncomingVCCs-StartVci  
  INTEGER as ds3AtmNetworkProfile-LineConfig-IncomingVCCs-EndVci  

Mibds3AtmNetworkProfile-LineConfig-VcSwitchingVpiEntry  
SEQUENCE    
  INTEGER as ds3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Shelf-o  
  INTEGER as ds3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Slot-o  
  INTEGER as ds3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Item-o  
  INTEGER as ds3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Index-o  
  INTEGER as ds3AtmNetworkProfile-LineConfig-VcSwitchingVpi