ASCEND-MIBE3ATMNET-MIB

File: ASCEND-MIBE3ATMNET-MIB.mib (25420 bytes)

Imported modules

ASCEND-MIB RFC1155-SMI RFC-1212

Imported symbols

configuration IpAddress OBJECT-TYPE

Defined Objects

mibe3AtmNetworkProfile 1.3.6.1.4.1.529.23.15
OBJECT IDENTIFIER    

mibe3AtmNetworkProfileTable 1.3.6.1.4.1.529.23.15.1
A list of mibe3AtmNetworkProfile profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Mibe3AtmNetworkProfileEntry

mibe3AtmNetworkProfileEntry 1.3.6.1.4.1.529.23.15.1.1
A mibe3AtmNetworkProfile entry containing objects that maps to the parameters of mibe3AtmNetworkProfile profile.
OBJECT-TYPE    
  Mibe3AtmNetworkProfileEntry  

e3AtmNetworkProfile-Shelf-o 1.3.6.1.4.1.529.23.15.1.1.1
OBJECT-TYPE    
  INTEGER  

e3AtmNetworkProfile-Slot-o 1.3.6.1.4.1.529.23.15.1.1.2
OBJECT-TYPE    
  INTEGER  

e3AtmNetworkProfile-Item-o 1.3.6.1.4.1.529.23.15.1.1.3
OBJECT-TYPE    
  INTEGER  

e3AtmNetworkProfile-Name 1.3.6.1.4.1.529.23.15.1.1.4
For future use. The current design does not use the name field but instead references E3-ATM lines by the physical address; we may in the future support referencing E3-ATM lines by name as well as by address. The name consists of a null terminated ascii string supplied by the user; it defaults to the ascii form of the E3-ATM line physical address.
OBJECT-TYPE    
  DisplayString  

e3AtmNetworkProfile-PhysicalAddress-Shelf 1.3.6.1.4.1.529.23.15.1.1.5
The number of the shelf that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anyShelf(1), shelf1(2), shelf2(3), shelf3(4), shelf4(5), shelf5(6), shelf6(7), shelf7(8), shelf8(9), shelf9(10)  

e3AtmNetworkProfile-PhysicalAddress-Slot 1.3.6.1.4.1.529.23.15.1.1.6
The number of the slot that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17), slot17(18), slot18(19), slot19(20), slot20(21), slot21(22), slot22(23), slot23(24), slot24(25), slot25(26), slot26(27), slot27(28), slot28(29), slot29(30), slot30(31), slot31(32), slot32(33), slot33(34), slot34(35), slot35(36), slot36(37), slot37(38), slot38(39), slot39(40), slot40(41), aLim(55), bLim(56), cLim(57), dLim(58), leftController(49), rightController(50), controller(42), firstControlModule(53), secondControlModule(54), trunkModule1(45), trunkModule2(46), controlModule(51), slotPrimary(59)  

e3AtmNetworkProfile-PhysicalAddress-ItemNumber 1.3.6.1.4.1.529.23.15.1.1.7
A number that specifies an addressable entity within the context of shelf and slot.
OBJECT-TYPE    
  INTEGER  

e3AtmNetworkProfile-Enabled 1.3.6.1.4.1.529.23.15.1.1.8
TRUE if the line is enabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

e3AtmNetworkProfile-LineConfig-TrunkGroup 1.3.6.1.4.1.529.23.15.1.1.9
The trunk group to which this line is assigned. 0 means this line is not part of a trunk group.
OBJECT-TYPE    
  INTEGER  

e3AtmNetworkProfile-LineConfig-NailedGroup 1.3.6.1.4.1.529.23.15.1.1.10
A number that identifies the set of lines that makes up a nailed group. 0 means this line is not part of a nailed group.
OBJECT-TYPE    
  INTEGER  

e3AtmNetworkProfile-LineConfig-Loopback 1.3.6.1.4.1.529.23.15.1.1.14
Loopback mode.
OBJECT-TYPE    
  INTEGER noLoopback(1), facilityLoopback(2), localLoopback(3)  

e3AtmNetworkProfile-LineConfig-HighTxOutput 1.3.6.1.4.1.529.23.15.1.1.15
TRUE if the E3 cable length is more than 300 ft, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

e3AtmNetworkProfile-LineConfig-FramerMode 1.3.6.1.4.1.529.23.15.1.1.16
The E3 ATM framer mode.
OBJECT-TYPE    
  INTEGER g751Adm(1), g751Plcp(2), g832Adm(3), g832AdmFrameLocked(4), g832AdmLoopTimed(5)  

e3AtmNetworkProfile-LineConfig-VpiVciRange 1.3.6.1.4.1.529.23.15.1.1.17
The E3 ATM valid VPI/VCI value range.
OBJECT-TYPE    
  INTEGER n-01-3232767(1), n-03-3216383(2), n-07-328191(3), n-015-324095(4), n-031-322047(5), n-063-321023(6), n-0127-32511(7), n-0255-32255(8), vpi0255Vci32255(9), vpi0255Vci32511(10), vpi0255Vci321023(11), vpi0255Vci322047(12), vpi0255Vci324095(13), vpi0255Vci328191(14), vpi0255Vci3216383(15)  

e3AtmNetworkProfile-LineConfig-CellPayloadScramble 1.3.6.1.4.1.529.23.15.1.1.18
TRUE if the cell payload scrambling is enabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

e3AtmNetworkProfile-Action-o 1.3.6.1.4.1.529.23.15.1.1.19
OBJECT-TYPE    
  INTEGER noAction(1), createProfile(2), deleteProfile(3)  

e3AtmNetworkProfile-LineConfig-ReceiveEqualization 1.3.6.1.4.1.529.23.15.1.1.20
TRUE if receive equalization is needed, otherwise FALSE. Receive equalization is needed if the cable length is more than 300 ft.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

e3AtmNetworkProfile-LineConfig-ClockSource 1.3.6.1.4.1.529.23.15.1.1.21
Determine whether the 8KHz clock from the E3-ATM board is eligible to be used as the system-wide TDM clock source.
OBJECT-TYPE    
  INTEGER eligible(1), notEligible(2)  

e3AtmNetworkProfile-LineConfig-ClockPriority 1.3.6.1.4.1.529.23.15.1.1.22
Clock priority assigned to the E3-ATM line. Used to select a particular E3 line as clock source.
OBJECT-TYPE    
  INTEGER highPriority(2), middlePriority(3), lowPriority(4)  

e3AtmNetworkProfile-SparePhysicalAddress-Shelf 1.3.6.1.4.1.529.23.15.1.1.23
The number of the shelf that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anyShelf(1), shelf1(2), shelf2(3), shelf3(4), shelf4(5), shelf5(6), shelf6(7), shelf7(8), shelf8(9), shelf9(10)  

e3AtmNetworkProfile-SparePhysicalAddress-Slot 1.3.6.1.4.1.529.23.15.1.1.24
The number of the slot that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17), slot17(18), slot18(19), slot19(20), slot20(21), slot21(22), slot22(23), slot23(24), slot24(25), slot25(26), slot26(27), slot27(28), slot28(29), slot29(30), slot30(31), slot31(32), slot32(33), slot33(34), slot34(35), slot35(36), slot36(37), slot37(38), slot38(39), slot39(40), slot40(41), aLim(55), bLim(56), cLim(57), dLim(58), leftController(49), rightController(50), controller(42), firstControlModule(53), secondControlModule(54), trunkModule1(45), trunkModule2(46), controlModule(51), slotPrimary(59)  

e3AtmNetworkProfile-SparePhysicalAddress-ItemNumber 1.3.6.1.4.1.529.23.15.1.1.25
A number that specifies an addressable entity within the context of shelf and slot.
OBJECT-TYPE    
  INTEGER  

e3AtmNetworkProfile-SparingMode 1.3.6.1.4.1.529.23.15.1.1.26
Trunk port sparing operational mode for this port.
OBJECT-TYPE    
  INTEGER inactive(1), manual(2), automatic(3)  

e3AtmNetworkProfile-IgnoreLineup 1.3.6.1.4.1.529.23.15.1.1.27
Ignore line up value for this port.
OBJECT-TYPE    
  INTEGER systemDefined(1), no(2), yes(3)  

e3AtmNetworkProfile-LineConfig-StatusChangeTrapEnable 1.3.6.1.4.1.529.23.15.1.1.28
When set to No, do not send dsx3LineStatusChangeTrapEnable trap. If Yes, send traps. The default is No.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

mibe3AtmNetworkProfile-LineConfig-TrafficShapersTable 1.3.6.1.4.1.529.23.15.2
A list of mibe3AtmNetworkProfile__line_config__traffic_shapers profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Mibe3AtmNetworkProfile-LineConfig-TrafficShapersEntry

mibe3AtmNetworkProfile-LineConfig-TrafficShapersEntry 1.3.6.1.4.1.529.23.15.2.1
A mibe3AtmNetworkProfile__line_config__traffic_shapers entry containing objects that maps to the parameters of mibe3AtmNetworkProfile__line_config__traffic_shapers profile.
OBJECT-TYPE    
  Mibe3AtmNetworkProfile-LineConfig-TrafficShapersEntry  

e3AtmNetworkProfile-LineConfig-TrafficShapers-Shelf-o 1.3.6.1.4.1.529.23.15.2.1.1
OBJECT-TYPE    
  INTEGER  

e3AtmNetworkProfile-LineConfig-TrafficShapers-Slot-o 1.3.6.1.4.1.529.23.15.2.1.2
OBJECT-TYPE    
  INTEGER  

e3AtmNetworkProfile-LineConfig-TrafficShapers-Item-o 1.3.6.1.4.1.529.23.15.2.1.3
OBJECT-TYPE    
  INTEGER  

e3AtmNetworkProfile-LineConfig-TrafficShapers-Index-o 1.3.6.1.4.1.529.23.15.2.1.4
OBJECT-TYPE    
  INTEGER  

e3AtmNetworkProfile-LineConfig-TrafficShapers-Enabled 1.3.6.1.4.1.529.23.15.2.1.5
TRUE if the shaper is enabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

e3AtmNetworkProfile-LineConfig-TrafficShapers-BitRate 1.3.6.1.4.1.529.23.15.2.1.6
What is the sustained rate in Kilobits per second that can be transmitted by the VC(s) when using this shaper. Limited by the framer mode and the interface type.
OBJECT-TYPE    
  INTEGER  

e3AtmNetworkProfile-LineConfig-TrafficShapers-PeakRate 1.3.6.1.4.1.529.23.15.2.1.7
What is the peak rate in Kilobits per second that can be transmitted by the VC(s) when using this shaper. Limited by the framer mode and the interface type.
OBJECT-TYPE    
  INTEGER  

e3AtmNetworkProfile-LineConfig-TrafficShapers-MaxBurstSize 1.3.6.1.4.1.529.23.15.2.1.8
What is the maximum burst size in cell that can be transmitted during the peak rate by the VC(s) when using this shaper.
OBJECT-TYPE    
  INTEGER  

e3AtmNetworkProfile-LineConfig-TrafficShapers-Aggregate 1.3.6.1.4.1.529.23.15.2.1.9
If FALSE each individual VC gets the bit rate that is assigned to this shaper. If TRUE the VCs share the bit rate that is assigned to this shaper equally.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

e3AtmNetworkProfile-LineConfig-TrafficShapers-Priority 1.3.6.1.4.1.529.23.15.2.1.10
A number that represent the prioriy of the shaper in respect to other shapers. 0 is the highest priority and 15 is the lowest.
OBJECT-TYPE    
  INTEGER  

mibe3AtmNetworkProfile-LineConfig-IncomingVCCsTable 1.3.6.1.4.1.529.23.15.3
A list of mibe3AtmNetworkProfile__line_config__incomingVCCs profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Mibe3AtmNetworkProfile-LineConfig-IncomingVCCsEntry

mibe3AtmNetworkProfile-LineConfig-IncomingVCCsEntry 1.3.6.1.4.1.529.23.15.3.1
A mibe3AtmNetworkProfile__line_config__incomingVCCs entry containing objects that maps to the parameters of mibe3AtmNetworkProfile__line_config__incomingVCCs profile.
OBJECT-TYPE    
  Mibe3AtmNetworkProfile-LineConfig-IncomingVCCsEntry  

e3AtmNetworkProfile-LineConfig-IncomingVCCs-Shelf-o 1.3.6.1.4.1.529.23.15.3.1.1
OBJECT-TYPE    
  INTEGER  

e3AtmNetworkProfile-LineConfig-IncomingVCCs-Slot-o 1.3.6.1.4.1.529.23.15.3.1.2
OBJECT-TYPE    
  INTEGER  

e3AtmNetworkProfile-LineConfig-IncomingVCCs-Item-o 1.3.6.1.4.1.529.23.15.3.1.3
OBJECT-TYPE    
  INTEGER  

e3AtmNetworkProfile-LineConfig-IncomingVCCs-Index-o 1.3.6.1.4.1.529.23.15.3.1.4
OBJECT-TYPE    
  INTEGER  

e3AtmNetworkProfile-LineConfig-IncomingVCCs-Enabled 1.3.6.1.4.1.529.23.15.3.1.5
TRUE if the item is enabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

e3AtmNetworkProfile-LineConfig-IncomingVCCs-Vpi 1.3.6.1.4.1.529.23.15.3.1.6
A number that identifies the Virtual Path Identifier of this item.
OBJECT-TYPE    
  INTEGER  

e3AtmNetworkProfile-LineConfig-IncomingVCCs-StartVci 1.3.6.1.4.1.529.23.15.3.1.7
A number that identifies the starting Virtual Channel Identifier of this item.
OBJECT-TYPE    
  INTEGER  

e3AtmNetworkProfile-LineConfig-IncomingVCCs-EndVci 1.3.6.1.4.1.529.23.15.3.1.8
A number that identifies the ending Virtual Channel Identifier of this item.
OBJECT-TYPE    
  INTEGER  

mibe3AtmNetworkProfile-LineConfig-VcSwitchingVpiTable 1.3.6.1.4.1.529.23.15.4
A list of mibe3AtmNetworkProfile__line_config__vc_switching_vpi profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Mibe3AtmNetworkProfile-LineConfig-VcSwitchingVpiEntry

mibe3AtmNetworkProfile-LineConfig-VcSwitchingVpiEntry 1.3.6.1.4.1.529.23.15.4.1
A mibe3AtmNetworkProfile__line_config__vc_switching_vpi entry containing objects that maps to the parameters of mibe3AtmNetworkProfile__line_config__vc_switching_vpi profile.
OBJECT-TYPE    
  Mibe3AtmNetworkProfile-LineConfig-VcSwitchingVpiEntry  

e3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Shelf-o 1.3.6.1.4.1.529.23.15.4.1.1
OBJECT-TYPE    
  INTEGER  

e3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Slot-o 1.3.6.1.4.1.529.23.15.4.1.2
OBJECT-TYPE    
  INTEGER  

e3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Item-o 1.3.6.1.4.1.529.23.15.4.1.3
OBJECT-TYPE    
  INTEGER  

e3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Index-o 1.3.6.1.4.1.529.23.15.4.1.4
OBJECT-TYPE    
  INTEGER  

e3AtmNetworkProfile-LineConfig-VcSwitchingVpi 1.3.6.1.4.1.529.23.15.4.1.5
VPI(s) to be used for the VC switching (VCC). It should always contain VPI 0 for VC switching. All VC switching VPI have similar valid VCI range which is determined by 'vpi-vci-range' attribute. Rest of the VPIs will be used for the VP switching. The user needs to understand that adding a VPI in a list of VC switching VPI will allocate more VCCs for this port. The user needs to make sure that VCCs for the other ports have been reduced to accommodate increase in VCC for this port because system can support only 32k VCCs on all trunk ports combined. If vci-range is 4k and VPI 0 is the only VPI doing VC switching for this port than this port occupies 4k VCCs. If user adds VPI 1 to the list of VPIs to do VCC then total 8k VCCs are occupied for this port. System will reject the configuration if user tries to use more than 32k VCCs for all trunk ports combined. ANY CHANGES IN A LIST OF VPIs WILL BE EFFECTIVE IMMEDIATLY. IN ORDER TO DO THAT ALL CONNECTIONS WITHIN THIS SYSTEM WILL BE DROPPED AND REESTABLISHED.
OBJECT-TYPE    
  INTEGER  

Defined Objects

DisplayString  
OCTET STRING    

Mibe3AtmNetworkProfileEntry  
SEQUENCE    
  INTEGER as e3AtmNetworkProfile-Shelf-o  
  INTEGER as e3AtmNetworkProfile-Slot-o  
  INTEGER as e3AtmNetworkProfile-Item-o  
  DisplayString as e3AtmNetworkProfile-Name  
  INTEGER as e3AtmNetworkProfile-PhysicalAddress-Shelf  
  INTEGER as e3AtmNetworkProfile-PhysicalAddress-Slot  
  INTEGER as e3AtmNetworkProfile-PhysicalAddress-ItemNumber  
  INTEGER as e3AtmNetworkProfile-Enabled  
  INTEGER as e3AtmNetworkProfile-IgnoreLineup  
  INTEGER as e3AtmNetworkProfile-LineConfig-TrunkGroup  
  INTEGER as e3AtmNetworkProfile-LineConfig-NailedGroup  
  INTEGER as e3AtmNetworkProfile-LineConfig-Loopback  
  INTEGER as e3AtmNetworkProfile-LineConfig-HighTxOutput  
  INTEGER as e3AtmNetworkProfile-LineConfig-ReceiveEqualization  
  INTEGER as e3AtmNetworkProfile-LineConfig-FramerMode  
  INTEGER as e3AtmNetworkProfile-LineConfig-VpiVciRange  
  INTEGER as e3AtmNetworkProfile-LineConfig-ClockSource  
  INTEGER as e3AtmNetworkProfile-LineConfig-ClockPriority  
  INTEGER as e3AtmNetworkProfile-LineConfig-CellPayloadScramble  
  INTEGER as e3AtmNetworkProfile-LineConfig-StatusChangeTrapEnable  
  INTEGER as e3AtmNetworkProfile-SparePhysicalAddress-Shelf  
  INTEGER as e3AtmNetworkProfile-SparePhysicalAddress-Slot  
  INTEGER as e3AtmNetworkProfile-SparePhysicalAddress-ItemNumber  
  INTEGER as e3AtmNetworkProfile-SparingMode  
  INTEGER as e3AtmNetworkProfile-Action-o  

Mibe3AtmNetworkProfile-LineConfig-TrafficShapersEntry  
SEQUENCE    
  INTEGER as e3AtmNetworkProfile-LineConfig-TrafficShapers-Shelf-o  
  INTEGER as e3AtmNetworkProfile-LineConfig-TrafficShapers-Slot-o  
  INTEGER as e3AtmNetworkProfile-LineConfig-TrafficShapers-Item-o  
  INTEGER as e3AtmNetworkProfile-LineConfig-TrafficShapers-Index-o  
  INTEGER as e3AtmNetworkProfile-LineConfig-TrafficShapers-Enabled  
  INTEGER as e3AtmNetworkProfile-LineConfig-TrafficShapers-BitRate  
  INTEGER as e3AtmNetworkProfile-LineConfig-TrafficShapers-PeakRate  
  INTEGER as e3AtmNetworkProfile-LineConfig-TrafficShapers-MaxBurstSize  
  INTEGER as e3AtmNetworkProfile-LineConfig-TrafficShapers-Aggregate  
  INTEGER as e3AtmNetworkProfile-LineConfig-TrafficShapers-Priority  

Mibe3AtmNetworkProfile-LineConfig-IncomingVCCsEntry  
SEQUENCE    
  INTEGER as e3AtmNetworkProfile-LineConfig-IncomingVCCs-Shelf-o  
  INTEGER as e3AtmNetworkProfile-LineConfig-IncomingVCCs-Slot-o  
  INTEGER as e3AtmNetworkProfile-LineConfig-IncomingVCCs-Item-o  
  INTEGER as e3AtmNetworkProfile-LineConfig-IncomingVCCs-Index-o  
  INTEGER as e3AtmNetworkProfile-LineConfig-IncomingVCCs-Enabled  
  INTEGER as e3AtmNetworkProfile-LineConfig-IncomingVCCs-Vpi  
  INTEGER as e3AtmNetworkProfile-LineConfig-IncomingVCCs-StartVci  
  INTEGER as e3AtmNetworkProfile-LineConfig-IncomingVCCs-EndVci  

Mibe3AtmNetworkProfile-LineConfig-VcSwitchingVpiEntry  
SEQUENCE    
  INTEGER as e3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Shelf-o  
  INTEGER as e3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Slot-o  
  INTEGER as e3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Item-o  
  INTEGER as e3AtmNetworkProfile-LineConfig-VcSwitchingVpi-Index-o  
  INTEGER as e3AtmNetworkProfile-LineConfig-VcSwitchingVpi