
| ASCEND-MIB | RFC1155-SMI | RFC-1212 |
| configuration | IpAddress | OBJECT-TYPE |
| mibhdsl2DslLineStatus | 1.3.6.1.4.1.529.23.159 | ||
| OBJECT IDENTIFIER | |||
| mibhdsl2DslLineStatusTable | 1.3.6.1.4.1.529.23.159.1 | ||
| A list of mibhdsl2DslLineStatus profile entries. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Mibhdsl2DslLineStatusEntry | |||
| mibhdsl2DslLineStatusEntry | 1.3.6.1.4.1.529.23.159.1.1 | ||
| A mibhdsl2DslLineStatus entry containing objects that maps to the parameters of mibhdsl2DslLineStatus profile. | |||
| OBJECT-TYPE | |||
| Mibhdsl2DslLineStatusEntry | |||
| hdsl2DslLineStatus-Shelf-o | 1.3.6.1.4.1.529.23.159.1.1.1 | ||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl2DslLineStatus-Slot-o | 1.3.6.1.4.1.529.23.159.1.1.2 | ||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl2DslLineStatus-Item-o | 1.3.6.1.4.1.529.23.159.1.1.3 | ||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl2DslLineStatus-PhysicalAddress-Shelf | 1.3.6.1.4.1.529.23.159.1.1.4 | ||
| The number of the shelf that the addressed physical device resides on. | |||
| OBJECT-TYPE | |||
| INTEGER | anyShelf(1), shelf1(2), shelf2(3), shelf3(4), shelf4(5), shelf5(6), shelf6(7), shelf7(8), shelf8(9), shelf9(10) | ||
| hdsl2DslLineStatus-PhysicalAddress-Slot | 1.3.6.1.4.1.529.23.159.1.1.5 | ||
| The number of the slot that the addressed physical device resides on. | |||
| OBJECT-TYPE | |||
| INTEGER | anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17), slot17(18), slot18(19), slot19(20), slot20(21), slot21(22), slot22(23), slot23(24), slot24(25), slot25(26), slot26(27), slot27(28), slot28(29), slot29(30), slot30(31), slot31(32), slot32(33), slot33(34), slot34(35), slot35(36), slot36(37), slot37(38), slot38(39), slot39(40), slot40(41), aLim(55), bLim(56), cLim(57), dLim(58), leftController(49), rightController(50), controller(42), firstControlModule(53), secondControlModule(54), trunkModule1(45), trunkModule2(46), controlModule(51), slotPrimary(59) | ||
| hdsl2DslLineStatus-PhysicalAddress-ItemNumber | 1.3.6.1.4.1.529.23.159.1.1.6 | ||
| A number that specifies an addressable entity within the context of shelf and slot. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl2DslLineStatus-LineState | 1.3.6.1.4.1.529.23.159.1.1.7 | ||
| The overall state of the line. | |||
| OBJECT-TYPE | |||
| INTEGER | doesNotExist(1), disabled(2), active(3) | ||
| hdsl2DslLineStatus-SparePhysicalAddress-Shelf | 1.3.6.1.4.1.529.23.159.1.1.8 | ||
| The number of the shelf that the addressed physical device resides on. | |||
| OBJECT-TYPE | |||
| INTEGER | anyShelf(1), shelf1(2), shelf2(3), shelf3(4), shelf4(5), shelf5(6), shelf6(7), shelf7(8), shelf8(9), shelf9(10) | ||
| hdsl2DslLineStatus-SparePhysicalAddress-Slot | 1.3.6.1.4.1.529.23.159.1.1.9 | ||
| The number of the slot that the addressed physical device resides on. | |||
| OBJECT-TYPE | |||
| INTEGER | anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17), slot17(18), slot18(19), slot19(20), slot20(21), slot21(22), slot22(23), slot23(24), slot24(25), slot25(26), slot26(27), slot27(28), slot28(29), slot29(30), slot30(31), slot31(32), slot32(33), slot33(34), slot34(35), slot35(36), slot36(37), slot37(38), slot38(39), slot39(40), slot40(41), aLim(55), bLim(56), cLim(57), dLim(58), leftController(49), rightController(50), controller(42), firstControlModule(53), secondControlModule(54), trunkModule1(45), trunkModule2(46), controlModule(51), slotPrimary(59) | ||
| hdsl2DslLineStatus-SparePhysicalAddress-ItemNumber | 1.3.6.1.4.1.529.23.159.1.1.10 | ||
| A number that specifies an addressable entity within the context of shelf and slot. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl2DslLineStatus-SparingState | 1.3.6.1.4.1.529.23.159.1.1.11 | ||
| The sparing state of the line. | |||
| OBJECT-TYPE | |||
| INTEGER | sparingNone(1), primaryActive(2), primaryInactive(3), secondaryActive(4), secondaryInactive(5) | ||
| hdsl2DslLineStatus-SparingChangeReason | 1.3.6.1.4.1.529.23.159.1.1.12 | ||
| The reason for the last sparing state change. | |||
| OBJECT-TYPE | |||
| INTEGER | unknown(1), manual(2), automatic(3), test(4) | ||
| hdsl2DslLineStatus-SparingChangeTime | 1.3.6.1.4.1.529.23.159.1.1.13 | ||
| The time of the last sparing state change. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl2DslLineStatus-SparingChangeCounter | 1.3.6.1.4.1.529.23.159.1.1.14 | ||
| The number of sparing state changes. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl2DslLineStatus-VpiVciRange | 1.3.6.1.4.1.529.23.159.1.1.15 | ||
| The valid range of vpi and vci for the circuits established for the line. This range can change only after LIM reboot. | |||
| OBJECT-TYPE | |||
| INTEGER | vpi01Vci321023(6), vpi03Vci32511(1), vpi07Vci32255(2), vpi015Vci32127(3), vpi031Vci3263(4), notApplicable(5) | ||
| hdsl2DslLineStatus-VpSwitchingVpi | 1.3.6.1.4.1.529.23.159.1.1.16 | ||
| VPI to be used for the VP switching. Rest of the VPIs will be used for the VC switching. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl2DslLineStatus-PhysicalStatus-IfGroupIndex | 1.3.6.1.4.1.529.23.159.1.1.17 | ||
| Interface groups index assigned to this physical port. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl2DslLineStatus-PhysicalStatus-UnitType | 1.3.6.1.4.1.529.23.159.1.1.18 | ||
| Unit types defines if the node is operating Central Office or Customer Premise equipment software. | |||
| OBJECT-TYPE | |||
| INTEGER | coe(1), cpe(2) | ||
| hdsl2DslLineStatus-PhysicalStatus-InterfaceType | 1.3.6.1.4.1.529.23.159.1.1.19 | ||
| Interface type defines if the node is operating on HDSL2 or GSHDSL | |||
| OBJECT-TYPE | |||
| INTEGER | default(1), gShdsl(2), hdsl2(3) | ||
| hdsl2DslLineStatus-PhysicalStatus-DevLineState | 1.3.6.1.4.1.529.23.159.1.1.20 | ||
| Display of current interface state. | |||
| OBJECT-TYPE | |||
| INTEGER | portUp(2), test(3), startupHandshake(4), startupTraining(5), startupDownload(6), idle(7), down(8), outOfService(9), unknown(10), analogLoopback(11), digitalLoopback(12) | ||
| hdsl2DslLineStatus-PhysicalStatus-OperationalRate | 1.3.6.1.4.1.529.23.159.1.1.21 | ||
| Operational up and down stream rate. Zero means unknown. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl2DslLineStatus-PhysicalStatus-FirmwareVer | 1.3.6.1.4.1.529.23.159.1.1.22 | ||
| Firmware version ID. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| hdsl2DslLineStatus-PhysicalStatus-HardwareVer | 1.3.6.1.4.1.529.23.159.1.1.23 | ||
| Hardware chip version. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl2DslLineStatus-PhysicalStatistic-LineUpTimer-Days | 1.3.6.1.4.1.529.23.159.1.1.24 | ||
| Number of days that the DSL line has been up. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl2DslLineStatus-PhysicalStatistic-LineUpTimer-Hours | 1.3.6.1.4.1.529.23.159.1.1.25 | ||
| Number of hours that the DSL line has been up. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl2DslLineStatus-PhysicalStatistic-LineUpTimer-Minutes | 1.3.6.1.4.1.529.23.159.1.1.26 | ||
| Number of minutes that the DSL line has been up. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl2DslLineStatus-PhysicalStatistic-RxSignalPresent | 1.3.6.1.4.1.529.23.159.1.1.27 | ||
| State if the receive signal is present or not. | |||
| OBJECT-TYPE | |||
| INTEGER | yes(3), no(2) | ||
| hdsl2DslLineStatus-PhysicalStatistic-LineQuality | 1.3.6.1.4.1.529.23.159.1.1.28 | ||
| While the port is in the up state, this parameter displays the line quality. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl2DslLineStatus-PhysicalStatistic-UpDwnCntr | 1.3.6.1.4.1.529.23.159.1.1.29 | ||
| Interface Up Down counter value displays the number of times the interface trasitions from a down to up state. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl2DslLineStatus-PhysicalStatistic-SelfTest | 1.3.6.1.4.1.529.23.159.1.1.30 | ||
| Hardware/firmware self test results. | |||
| OBJECT-TYPE | |||
| INTEGER | passed(1), selfTestFailed(2), localLoopBackFailed(3) | ||
| hdsl2DslLineStatus-PhysicalStatistic-TransmitPower | 1.3.6.1.4.1.529.23.159.1.1.31 | ||
| Transmit power in DB. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl2DslLineStatus-PhysicalStatistic-FramerSyncStatus | 1.3.6.1.4.1.529.23.159.1.1.32 | ||
| Framer sync status | |||
| OBJECT-TYPE | |||
| INTEGER | inSync(2), outOfSync(1) | ||
| hdsl2DslLineStatus-PhysicalStatistic-CodeViolations | 1.3.6.1.4.1.529.23.159.1.1.33 | ||
| Line is defined as a count of HDSL2 CRC anomalies occuring during the accumuation period. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl2DslLineStatus-PhysicalStatistic-ErroredSecond | 1.3.6.1.4.1.529.23.159.1.1.34 | ||
| Errored second is defined as a count of 1 second intervals during which one or more CRC anomalies are declaired and/or one or more LOSW defects are declared. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl2DslLineStatus-PhysicalStatistic-SeverelyErroredSecond | 1.3.6.1.4.1.529.23.159.1.1.35 | ||
| Line is defined as a count of 1 second intervals for during which at least 50 CRC anomalies are declared or one or more LOSW defects are declared. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl2DslLineStatus-PhysicalStatistic-LoswSecond | 1.3.6.1.4.1.529.23.159.1.1.36 | ||
| Line is defined as a count of 1 second intervals during which one or more HDSL2 LOSW defects are declared. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl2DslLineStatus-PhysicalStatistic-UnavailableSecond | 1.3.6.1.4.1.529.23.159.1.1.37 | ||
| Line is a count of 1 second intervals for which the HDSL2 line is unavailable. The HDSL2 line becomes unavailable at the onset of 10 contiguous SES-L's. Once unavailable the HDSL2 line becomes available at the onset of 10 contiguous seconds with no SES-L's. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl2DslLineStatus-PhysicalStatistic-LoopAttenuation | 1.3.6.1.4.1.529.23.159.1.1.38 | ||
| Current loop attenuation in DB. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl2DslLineStatus-Action-o | 1.3.6.1.4.1.529.23.159.1.1.39 | ||
| OBJECT-TYPE | |||
| INTEGER | noAction(1), createProfile(2), deleteProfile(3) | ||
| hdsl2DslLineStatus-PhysicalStatistic-Snr | 1.3.6.1.4.1.529.23.159.1.1.40 | ||
| While the port is in the up state, this parameter displays the Signal to Noise Ratio. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl2DslLineStatus-PhysicalStatistic-SturLoopAttenuation | 1.3.6.1.4.1.529.23.159.1.1.41 | ||
| Current loop attenuation in DB from the STU-R. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl2DslLineStatus-PhysicalStatistic-SturSnr | 1.3.6.1.4.1.529.23.159.1.1.42 | ||
| While the port is in the up state, this parameter displays the Signal to Noise Ratio from the STU-R. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl2DslLineStatus-PhysicalStatus-NetworkType | 1.3.6.1.4.1.529.23.159.1.1.43 | ||
| Current Standard Network type. Either Annex A, Annex B or Annex B ANFP. | |||
| OBJECT-TYPE | |||
| INTEGER | no(1), yes(2) | ||
| DisplayString | |||
| OCTET STRING | |||
| Mibhdsl2DslLineStatusEntry | |||
| SEQUENCE | |||
| INTEGER as hdsl2DslLineStatus-Shelf-o | |||
| INTEGER as hdsl2DslLineStatus-Slot-o | |||
| INTEGER as hdsl2DslLineStatus-Item-o | |||
| INTEGER as hdsl2DslLineStatus-PhysicalAddress-Shelf | |||
| INTEGER as hdsl2DslLineStatus-PhysicalAddress-Slot | |||
| INTEGER as hdsl2DslLineStatus-PhysicalAddress-ItemNumber | |||
| INTEGER as hdsl2DslLineStatus-LineState | |||
| INTEGER as hdsl2DslLineStatus-SparePhysicalAddress-Shelf | |||
| INTEGER as hdsl2DslLineStatus-SparePhysicalAddress-Slot | |||
| INTEGER as hdsl2DslLineStatus-SparePhysicalAddress-ItemNumber | |||
| INTEGER as hdsl2DslLineStatus-SparingState | |||
| INTEGER as hdsl2DslLineStatus-SparingChangeReason | |||
| INTEGER as hdsl2DslLineStatus-SparingChangeTime | |||
| INTEGER as hdsl2DslLineStatus-SparingChangeCounter | |||
| INTEGER as hdsl2DslLineStatus-VpiVciRange | |||
| INTEGER as hdsl2DslLineStatus-VpSwitchingVpi | |||
| INTEGER as hdsl2DslLineStatus-PhysicalStatus-IfGroupIndex | |||
| INTEGER as hdsl2DslLineStatus-PhysicalStatus-UnitType | |||
| INTEGER as hdsl2DslLineStatus-PhysicalStatus-InterfaceType | |||
| INTEGER as hdsl2DslLineStatus-PhysicalStatus-DevLineState | |||
| INTEGER as hdsl2DslLineStatus-PhysicalStatus-OperationalRate | |||
| DisplayString as hdsl2DslLineStatus-PhysicalStatus-FirmwareVer | |||
| INTEGER as hdsl2DslLineStatus-PhysicalStatus-HardwareVer | |||
| INTEGER as hdsl2DslLineStatus-PhysicalStatus-NetworkType | |||
| INTEGER as hdsl2DslLineStatus-PhysicalStatistic-LineUpTimer-Days | |||
| INTEGER as hdsl2DslLineStatus-PhysicalStatistic-LineUpTimer-Hours | |||
| INTEGER as hdsl2DslLineStatus-PhysicalStatistic-LineUpTimer-Minutes | |||
| INTEGER as hdsl2DslLineStatus-PhysicalStatistic-RxSignalPresent | |||
| INTEGER as hdsl2DslLineStatus-PhysicalStatistic-LineQuality | |||
| INTEGER as hdsl2DslLineStatus-PhysicalStatistic-UpDwnCntr | |||
| INTEGER as hdsl2DslLineStatus-PhysicalStatistic-SelfTest | |||
| INTEGER as hdsl2DslLineStatus-PhysicalStatistic-TransmitPower | |||
| INTEGER as hdsl2DslLineStatus-PhysicalStatistic-FramerSyncStatus | |||
| INTEGER as hdsl2DslLineStatus-PhysicalStatistic-CodeViolations | |||
| INTEGER as hdsl2DslLineStatus-PhysicalStatistic-ErroredSecond | |||
| INTEGER as hdsl2DslLineStatus-PhysicalStatistic-SeverelyErroredSecond | |||
| INTEGER as hdsl2DslLineStatus-PhysicalStatistic-LoswSecond | |||
| INTEGER as hdsl2DslLineStatus-PhysicalStatistic-UnavailableSecond | |||
| INTEGER as hdsl2DslLineStatus-PhysicalStatistic-LoopAttenuation | |||
| INTEGER as hdsl2DslLineStatus-PhysicalStatistic-Snr | |||
| INTEGER as hdsl2DslLineStatus-PhysicalStatistic-SturLoopAttenuation | |||
| INTEGER as hdsl2DslLineStatus-PhysicalStatistic-SturSnr | |||
| INTEGER as hdsl2DslLineStatus-Action-o | |||